Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 August 2024, 15:42:30 UTC
sort by:
Revision Author Date Message Commit Date
1f13d75 Roger Pau Monné 03 November 2015, 16:34:09 UTC xen-blkback: only read request operation from shared ring once A compiler may load a switch statement value multiple times, which could be bad when the value is in memory shared with the frontend. When converting a non-native request to a native one, ensure that src->operation is only loaded once by using READ_ONCE(). This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:32 UTC
68a33bf David Vrabel 30 October 2015, 15:17:06 UTC xen-netback: use RING_COPY_REQUEST() throughout Instead of open-coding memcpy()s and directly accessing Tx and Rx requests, use the new RING_COPY_REQUEST() that ensures the local copy is correct. This is more than is strictly necessary for guest Rx requests since only the id and gref fields are used and it is harmless if the frontend modifies these. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:28 UTC
0f58996 David Vrabel 30 October 2015, 15:16:01 UTC xen-netback: don't use last request to determine minimum Tx credit The last from guest transmitted request gives no indication about the minimum amount of credit that the guest might need to send a packet since the last packet might have been a small one. Instead allow for the worst case 128 KiB packet. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:23 UTC
454d5d8 David Vrabel 30 October 2015, 14:58:08 UTC xen: Add RING_COPY_REQUEST() Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly (i.e., by not considering that the other end may alter the data in the shared ring while it is being inspected). Safe usage of a request generally requires taking a local copy. Provide a RING_COPY_REQUEST() macro to use instead of RING_GET_REQUEST() and an open-coded memcpy(). This takes care of ensuring that the copy is done correctly regardless of any possible compiler optimizations. Use a volatile source to prevent the compiler from reordering or omitting the copy. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:17 UTC
20f36e0 Boris Ostrovsky 13 December 2015, 00:25:55 UTC xen/x86/pvh: Use HVM's flush_tlb_others op Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 14 December 2015, 13:53:40 UTC
de0afc9 Boris Ostrovsky 02 December 2015, 17:10:48 UTC xen: Resume PMU from non-atomic context Resuming PMU currently triggers a warning from ___might_sleep() (assuming CONFIG_DEBUG_ATOMIC_SLEEP is set) when xen_pmu_init() allocates GFP_KERNEL page because we are in state resembling atomic context. Move resuming PMU to xen_arch_resume() which is called in regular context. For symmetry move suspending PMU to xen_arch_suspend() as well. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> # 4.3 Signed-off-by: David Vrabel <david.vrabel@citrix.com> 02 December 2015, 17:17:17 UTC
3de88d6 Ross Lagerwall 19 June 2015, 15:15:57 UTC xen/events/fifo: Consume unprocessed events when a CPU dies When a CPU is offlined, there may be unprocessed events on a port for that CPU. If the port is subsequently reused on a different CPU, it could be in an unexpected state with the link bit set, resulting in interrupts being missed. Fix this by consuming any unprocessed events for a particular CPU when that CPU dies. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com> 02 December 2015, 13:23:25 UTC
8620015 David Vrabel 26 November 2015, 16:14:35 UTC xen/evtchn: dynamically grow pending event channel ring If more than 1024 event channels are bound to a evtchn device then it possible (even with well behaved applications) for the ring to overflow and events to be lost (reported as an -EFBIG error). Dynamically increase the size of the ring so there is always enough space for all bound events. Well behaved applicables that only unmask events after draining them from the ring can thus no longer lose events. However, an application could unmask an event before draining it, allowing multiple entries per port to accumulate in the ring, and a overflow could still occur. So the overflow detection and reporting is retained. The ring size is initially only 64 entries so the common use case of an application only binding a few events will use less memory than before. The ring size may grow to 512 KiB (enough for all 2^17 possible channels). This order 7 kmalloc() may fail due to memory fragmentation, so we fall back to trying vmalloc(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> 26 November 2015, 18:49:54 UTC
b4ff838 Boris Ostrovsky 20 November 2015, 16:25:04 UTC xen/events: Always allocate legacy interrupts on PV guests After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 26 November 2015, 18:05:01 UTC
9c17d96 Boris Ostrovsky 10 November 2015, 20:10:33 UTC xen/gntdev: Grant maps should not be subject to NUMA balancing Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> 26 November 2015, 17:47:35 UTC
abed7d0 Zhenzhong Duan 27 October 2015, 19:19:52 UTC xen: fix the check of e_pfn in xen_find_pfn_range On some NUMA system, after dom0 up, we see below warning even if there are enough pfn ranges that could be used for remapping: "Unable to find available pfn range, not remapping identity pages" Fix it to avoid getting a memory region of zero size in xen_find_pfn_range. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 02 November 2015, 17:47:38 UTC
914beb9 David Vrabel 28 October 2015, 13:39:05 UTC x86/xen: add reschedule point when mapping foreign GFNs Mapping a large range of foreign GFNs can take a long time, add a reschedule point after each batch of 16 GFNs. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> 28 October 2015, 13:46:27 UTC
cb9644b Stefano Stabellini 22 October 2015, 16:22:46 UTC xen/arm: don't try to re-register vcpu_info on cpu_hotplug. Call disable_percpu_irq on CPU_DYING and enable_percpu_irq when the cpu is coming up. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> 23 October 2015, 13:20:48 UTC
1c7a621 Stefano Stabellini 22 October 2015, 16:21:46 UTC xen, cpu_hotplug: call device_offline instead of cpu_down When offlining a cpu, instead of cpu_down, call device_offline, which also takes care of updating the cpu.dev.offline field. This keeps the sysfs file /sys/devices/system/cpu/cpuN/online, up to date. Also move the call to disable_hotplug_cpu, because it makes more sense to have it there. We don't call device_online at cpu-hotplug time, because that would immediately take the cpu online, while we want to retain the current behaviour: the user needs to explicitly enable the cpu after it has been hotplugged. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: david.vrabel@citrix.com 23 October 2015, 13:20:48 UTC
a314e3e Stefano Stabellini 22 October 2015, 16:20:46 UTC xen/arm: Enable cpu_hotplug.c Build cpu_hotplug for ARM and ARM64 guests. Rename arch_(un)register_cpu to xen_(un)register_cpu and provide an empty implementation on ARM and ARM64. On x86 just call arch_(un)register_cpu as we are already doing. Initialize cpu_hotplug on ARM. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> 23 October 2015, 13:20:47 UTC
89bf4b4 Julien Grall 13 October 2015, 16:50:13 UTC xenbus: Support multiple grants ring with 64KB The PV ring may use multiple grants and expect them to be mapped contiguously in the virtual memory. Although, the current code is relying on a Linux page will be mapped to a single grant. On build where Linux is using a different page size than the grant (i.e other than 4KB), the grant will always be mapped on the first 4KB of each Linux page which make the final ring not contiguous in the memory. This can be fixed by mapping multiple grant in a same Linux page. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:47 UTC
f73314b Julien Grall 13 October 2015, 16:50:12 UTC xen/grant-table: Add an helper to iterate over a specific number of grants With the 64KB page granularity support on ARM64, a Linux page may be split accross multiple grant. Currently we have the helper gnttab_foreach_grant_in_grant to break a Linux page based on an offset and a len, but it doesn't fit when we only have a number of grants in hand. Introduce a new helper which take an array of Linux page and a number of grant and will figure out the address of each grant. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:46 UTC
9cce291 Julien Grall 13 October 2015, 16:50:11 UTC xen/xenbus: Rename *RING_PAGE* to *RING_GRANT* Linux may use a different page size than the size of grant. So make clear that the order is actually in number of grant. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:46 UTC
d5f985c Juergen Gross 14 September 2015, 13:20:52 UTC xen/arm: correct comment in enlighten.c Correct a comment in arch/arm/xen/enlighten.c referencing a wrong source file. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:45 UTC
a36012b Mikko Rapeli 15 October 2015, 05:56:08 UTC xen/gntdev: use types from linux/types.h in userspace headers __u32, __u64 etc. are preferred for userspace API headers. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:45 UTC
91afb7c Mikko Rapeli 15 October 2015, 05:56:07 UTC xen/gntalloc: use types from linux/types.h in userspace headers __u32, __u64 etc. are preferred for userspace API headers. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:44 UTC
3990dd2 Julien Grall 07 October 2015, 13:04:33 UTC xen/balloon: Use the correct sizeof when declaring frame_list The type of the item in frame_list is xen_pfn_t which is not an unsigned long on ARM but an uint64_t. With the current computation, the size of frame_list will be 2 * PAGE_SIZE rather than PAGE_SIZE. I bet it's just mistake when the type has been switched from "unsigned long" to "xen_pfn_t" in commit 965c0aaafe3e75d4e65cd4ec862915869bde3abd "xen: balloon: use correct type for frame_list". Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:44 UTC
9435cce Julien Grall 09 September 2015, 14:18:45 UTC xen/swiotlb: Add support for 64KB page granularity Swiotlb is used on ARM64 to support DMA on platform where devices are not protected by an SMMU. Furthermore it's only enabled for DOM0. While Xen is always using 4KB page granularity in the stage-2 page table, Linux ARM64 may either use 4KB or 64KB. This means that a Linux page can be spanned accross multiple Xen page. The Swiotlb code has to validate that the buffer used for DMA is physically contiguous in the memory. As a Linux page can't be shared between local memory and foreign page by design (the balloon code always removing entirely a Linux page), the changes in the code are very minimal because we only need to check the first Xen PFN. Note that it may be possible to optimize the function check_page_physically_contiguous to avoid looping over every Xen PFN for local memory. Although I will let this optimization for a follow-up. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:43 UTC
291be10 Julien Grall 09 September 2015, 14:17:33 UTC xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlb With 64KB page granularity support, the frame number will be different. It will be easier to modify the behavior in a single place rather than in each caller. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:43 UTC
250c9af Julien Grall 05 May 2015, 15:36:56 UTC arm/xen: Add support for 64KB page granularity The hypercall interface is always using 4KB page granularity. This is requiring to use xen page definition macro when we deal with hypercall. Note that pfn_to_gfn is working with a Xen pfn (i.e 4KB). We may want to rename pfn_gfn to make this explicit. We also allocate a 64KB page for the shared page even though only the first 4KB is used. I don't think this is really important for now as it helps to have the pointer 4KB aligned (XENMEM_add_to_physmap is taking a Xen PFN). Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:42 UTC
5995a68 Julien Grall 05 May 2015, 15:54:12 UTC xen/privcmd: Add support for Linux 64KB page granularity The hypercall interface (as well as the toolstack) is always using 4KB page granularity. When the toolstack is asking for mapping a series of guest PFN in a batch, it expects to have the page map contiguously in its virtual memory. When Linux is using 64KB page granularity, the privcmd driver will have to map multiple Xen PFN in a single Linux page. Note that this solution works on page granularity which is a multiple of 4KB. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:42 UTC
d0089e8 Julien Grall 05 May 2015, 12:15:29 UTC net/xen-netback: Make it running on 64KB page granularity The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity working as a network backend on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:41 UTC
30c5d7f Julien Grall 10 April 2015, 13:42:21 UTC net/xen-netfront: Make it running on 64KB page granularity The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using network device on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Note that we allocate a Linux page for each rx skb but only the first 4KB is used. We may improve the memory usage by extending the size of the rx skb. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:40 UTC
67de5df Julien Grall 05 May 2015, 15:25:56 UTC block/xen-blkback: Make it running on 64KB page granularity The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity behaving as a block backend on a non-modified Xen. It's only necessary to adapt the ring size and the number of request per indirect frames. The rest of the code is relying on the grant table code. Note that the grant table code is allocating a Linux page per grant which will result to waste 6OKB for every grant when Linux is using 64KB page granularity. This could be improved by sharing the page between multiple grants. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: "Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:40 UTC
c004a6f Julien Grall 22 July 2015, 15:44:54 UTC block/xen-blkfront: Make it running on 64KB page granularity The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using block device on a non-modified Xen. The block API is using segment which should at least be the size of a Linux page. Therefore, the driver will have to break the page in chunk of 4K before giving the page to the backend. When breaking a 64KB segment in 4KB chunks, it is possible that some chunks are empty. As the PV protocol always require to have data in the chunk, we have to count the number of Xen page which will be in use and avoid sending empty chunks. Note that, a pre-defined number of grants are reserved before preparing the request. This pre-defined number is based on the number and the maximum size of the segments. If each segment contains a very small amount of data, the driver may reserve too many grants (16 grants is reserved per segment with 64KB page granularity). Furthermore, in the case of persistent grants we allocate one Linux page per grant although only the first 4KB of the page will be effectively in use. This could be improved by sharing the page with multiple grants. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:39 UTC
5ed5451 Julien Grall 05 May 2015, 15:37:49 UTC xen/grant-table: Make it running on 64KB granularity The Xen interface is using 4KB page granularity. This means that each grant is 4KB. The current implementation allocates a Linux page per grant. On Linux using 64KB page granularity, only the first 4KB of the page will be used. We could decrease the memory wasted by sharing the page with multiple grant. It will require some care with the {Set,Clear}ForeignPage macro. Note that no changes has been made in the x86 code because both Linux and Xen will only use 4KB page granularity. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:39 UTC
a001c9d Julien Grall 05 May 2015, 15:37:30 UTC xen/events: fifo: Make it running on 64KB granularity Only use the first 4KB of the page to store the events channel info. It means that we will waste 60KB every time we allocate page for: * control block: a page is allocating per CPU * event array: a page is allocating everytime we need to expand it I think we can reduce the memory waste for the 2 areas by: * control block: sharing between multiple vCPUs. Although it will require some bookkeeping in order to not free the page when the CPU goes offline and the other CPUs sharing the page still there * event array: always extend the array event by 64K (i.e 16 4K chunk). That would require more care when we fail to expand the event channel. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:38 UTC
30756c6 Julien Grall 04 May 2015, 14:39:08 UTC xen/balloon: Don't rely on the page granularity is the same for Xen and Linux For ARM64 guests, Linux is able to support either 64K or 4K page granularity. Although, the hypercall interface is always based on 4K page granularity. With 64K page granularity, a single page will be spread over multiple Xen frame. To avoid splitting the page into 4K frame, take advantage of the extent_order field to directly allocate/free chunk of the Linux page size. Note that PVMMU is only used for PV guest (which is x86) and the page granularity is always 4KB. Some BUILD_BUG_ON has been added to ensure that because the code has not been modified. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:38 UTC
9652c08 Julien Grall 05 May 2015, 15:58:43 UTC tty/hvc: xen: Use xen page definition The console ring is always based on the page granularity of Xen. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:37 UTC
7d56792 Julien Grall 05 May 2015, 15:38:27 UTC xen/xenbus: Use Xen page definition All the ring (xenstore, and PV rings) are always based on the page granularity of Xen. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:37 UTC
36f8abd Julien Grall 11 May 2015, 12:44:21 UTC xen/biomerge: Don't allow biovec's to be merged when Linux is not using 4KB pages On ARM all dma-capable devices on a same platform may not be protected by an IOMMU. The DMA requests have to use the BFN (i.e MFN on ARM) in order to use correctly the device. While the DOM0 memory is allocated in a 1:1 fashion (PFN == MFN), grant mapping will screw this contiguous mapping. When Linux is using 64KB page granularitary, the page may be split accross multiple non-contiguous MFN (Xen is using 4KB page granularity). Therefore a DMA request will likely fail. Checking that a 64KB page is using contiguous MFN is tedious. For now, always says that biovec are not mergeable. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:36 UTC
4f503fb Julien Grall 01 July 2015, 13:10:38 UTC block/xen-blkfront: split get_grant in 2 Prepare the code to support 64KB page granularity. The first implementation will use a full Linux page per indirect and persistent grant. When non-persistent grant is used, each page of a bio request may be split in multiple grant. Furthermore, the field page of the grant structure is only used to copy data from persistent grant or indirect grant. Avoid to set it for other use case as it will have no meaning given the page will be split in multiple grant. Provide 2 functions, to setup indirect grant, the other for bio page. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:36 UTC
a7a6df2 Julien Grall 30 June 2015, 10:58:51 UTC block/xen-blkfront: Store a page rather a pfn in the grant structure All the usage of the field pfn are done using the same idiom: pfn_to_page(grant->pfn) This will return always the same page. Store directly the page in the grant to clean up the code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:35 UTC
3320466 Julien Grall 29 June 2015, 16:35:24 UTC block/xen-blkfront: Split blkif_queue_request in 2 Currently, blkif_queue_request has 2 distinct execution path: - Send a discard request - Send a read/write request The function is also allocating grants to use for generating the request. Although, this is only used for read/write request. Rather than having a function with 2 distinct execution path, separate the function in 2. This will also remove one level of tabulation. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:34 UTC
3922f32 Julien Grall 19 June 2015, 17:05:06 UTC xen/grant: Add helper gnttab_page_grant_foreign_access_ref_one Many PV drivers contain the idiom: pfn = page_to_gfn(...) /* Or similar */ gnttab_grant_foreign_access_ref Replace it by a new helper. Note that when Linux is using a different page granularity than Xen, the helper only gives access to the first 4KB grant. This is useful where drivers are allocating a full Linux page for each grant. Also include xen/interface/grant_table.h rather than xen/grant_table.h in asm/page.h for x86 to fix a compilation issue [1]. Only the former is useful in order to get the structure definition. [1] Interdependency between asm/page.h and xen/grant_table.h which result to page_mfn not being defined when necessary. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:34 UTC
008c320 Julien Grall 19 June 2015, 16:49:03 UTC xen/grant: Introduce helpers to split a page into grant Currently, a grant is always based on the Xen page granularity (i.e 4KB). When Linux is using a different page granularity, a single page will be split between multiple grants. The new helpers will be in charge of splitting the Linux page into grants and call a function given by the caller on each grant. Also provide an helper to count the number of grants within a given contiguous region. Note that the x86/include/asm/xen/page.h is now including xen/interface/grant_table.h rather than xen/grant_table.h. It's necessary because xen/grant_table.h depends on asm/xen/page.h and will break the compilation. Furthermore, only definition in interface/grant_table.h is required. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:33 UTC
1084b19 Julien Grall 04 May 2015, 14:47:16 UTC xen: Add Xen specific page definition The Xen hypercall interface is always using 4K page granularity on ARM and x86 architecture. With the incoming support of 64K page granularity for ARM64 guest, it won't be possible to re-use the Linux page definition in Xen drivers. Introduce Xen page definition helpers based on the Linux page definition. They have exactly the same name but prefixed with XEN_/xen_ prefix. Also modify xen_page_to_gfn to use new Xen page definition. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:33 UTC
5031612 Julien Grall 21 July 2015, 16:57:20 UTC arm/xen: Drop pte_mfn and mfn_pte They are not used in common code expect in one place in balloon.c which is only compiled when Linux is using PV MMU. It's not the case on ARM. Rather than worrying how to handle the 64KB case, drop them. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:32 UTC
a0f2e80 Julien Grall 24 June 2015, 17:03:14 UTC net/xen-netback: xenvif_gop_frag_copy: move GSO check out of the loop The skb doesn't change within the function. Therefore it's only necessary to check if we need GSO once at the beginning. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2015, 13:20:32 UTC
4a69c90 David Vrabel 22 July 2015, 13:50:37 UTC xen/balloon: pre-allocate p2m entries for ballooned pages Pages returned by alloc_xenballooned_pages() will be used for grant mapping which will call set_phys_to_machine() (in PV guests). Ballooned pages are set as INVALID_P2M_ENTRY in the p2m and thus may be using the (shared) missing tables and a subsequent set_phys_to_machine() will need to allocate new tables. Since the grant mapping may be done from a context that cannot sleep, the p2m entries must already be allocated. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> 23 October 2015, 13:20:31 UTC
8edfcf8 David Vrabel 22 July 2015, 13:48:09 UTC x86/xen: export xen_alloc_p2m_entry() Rename alloc_p2m() to xen_alloc_p2m_entry() and export it. This is useful for ensuring that a p2m entry is allocated (i.e., not a shared missing or identity entry) so that subsequent set_phys_to_machine() calls will require no further allocations. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Make xen_alloc_p2m_entry() a nop on auto-xlate guests. 23 October 2015, 13:20:28 UTC
1cf6a6c David Vrabel 25 June 2015, 15:29:18 UTC xen/balloon: use hotplugged pages for foreign mappings etc. alloc_xenballooned_pages() is used to get ballooned pages to back foreign mappings etc. Instead of having to balloon out real pages, use (if supported) hotplugged memory. This makes more memory available to the guest and reduces fragmentation in the p2m. This is only enabled if the xen.balloon.hotplug_unpopulated sysctl is set to 1. This sysctl defaults to 0 in case the udev rules to automatically online hotplugged memory do not exist. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Add xen.balloon.hotplug_unpopulated sysctl to enable use of hotplug for unpopulated pages. 23 October 2015, 13:20:05 UTC
81b286e David Vrabel 25 June 2015, 12:12:46 UTC xen/balloon: make alloc_xenballoon_pages() always allocate low pages All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> 23 October 2015, 13:20:05 UTC
b2ac6aa David Vrabel 25 June 2015, 11:10:28 UTC xen/balloon: only hotplug additional memory if required Now that we track the total number of pages (included hotplugged regions), it is easy to determine if more memory needs to be hotplugged. Add a new BP_WAIT state to signal that the balloon process needs to wait until kicked by the memory add notifier (when the new section is onlined by userspace). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Return BP_WAIT if enough sections are already hotplugged. v2: - New BP_WAIT status after adding new memory sections. 23 October 2015, 13:20:04 UTC
de5a77d David Vrabel 25 June 2015, 11:08:20 UTC xen/balloon: rationalize memory hotplug stats The stats used for memory hotplug make no sense and are fiddled with in odd ways. Remove them and introduce total_pages to track the total number of pages (both populated and unpopulated) including those within hotplugged regions (note that this includes not yet onlined pages). This will be used in a subsequent commit (xen/balloon: only hotplug additional memory if required) when deciding whether additional memory needs to be hotplugged. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> 23 October 2015, 13:20:04 UTC
55b3da9 David Vrabel 24 June 2015, 14:58:42 UTC xen/balloon: find non-conflicting regions to place hotplugged memory Instead of placing hotplugged memory at the end of RAM (which may conflict with PCI devices or reserved regions) use allocate_resource() to get a new, suitably aligned resource that does not conflict. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Remove stale comment. 23 October 2015, 13:20:03 UTC
f5775e0 David Vrabel 19 January 2015, 11:08:05 UTC x86/xen: discard RAM regions above the maximum reservation During setup, discard RAM regions that are above the maximum reservation (instead of marking them as E820_UNUSABLE). This allows hotplug memory to be placed at these addresses. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> 23 October 2015, 13:20:03 UTC
f6a6cb1 David Vrabel 25 June 2015, 12:18:12 UTC xen/balloon: remove scratch page left overs Commit 0bb599fd30108883b00c7d4a226eeb49111e6932 (xen: remove scratch frames for ballooned pages and m2p override) removed the use of the scratch page for ballooned out pages. Remove some left over function definitions. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> 23 October 2015, 13:20:02 UTC
62cedb9 David Vrabel 25 June 2015, 15:35:49 UTC mm: memory hotplug with an existing resource Add add_memory_resource() to add memory using an existing "System RAM" resource. This is useful if the memory region is being located by finding a free resource slot with allocate_resource(). Xen guests will make use of this in their balloon driver to hotplug arbitrary amounts of memory in response to toolstack requests. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com> 23 October 2015, 13:19:58 UTC
7379047 Linus Torvalds 18 October 2015, 23:08:42 UTC Linux 4.3-rc6 18 October 2015, 23:08:42 UTC
c44b325 Linus Torvalds 18 October 2015, 19:07:48 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Here are some bugfixes for the I2C subsystem. Kieran found a flaw in the recently renewed wake irq handling. Mika handled a user bug report where the ACPI info turned out to be unusable. I updated MAINTAINERS so that such bug reports will sooner get to the right people. Geert pointed me to a problem of some i2c drivers regarding PM which I fixed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 MAINTAINERS: add maintainers for Synopsis Designware I2C drivers i2c: designware-platdrv: enable RuntimePM before registering to the core i2c: s3c2410: enable RuntimePM before registering to the core i2c: rcar: enable RuntimePM before registering to the core i2c: return probe deferred status on dev_pm_domain_attach 18 October 2015, 19:07:48 UTC
56d4b8a Mika Westerberg 24 September 2015, 09:06:54 UTC i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 18 October 2015, 12:11:08 UTC
81429a6 Linus Torvalds 17 October 2015, 15:47:27 UTC Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq/timer fixes from Thomas Gleixner: "irq: a fix for the new hierarchical MSI interrupt handling which unbreaks PCI=n configurations. timers: a fix for the new hrtimer clock offset update mechanism to ensure that the boot time offset is respected" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Do not use pci_msi_[un]mask_irq as default methods * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Increment clock_was_set_seq in timekeeping_init() 17 October 2015, 15:47:27 UTC
16c8b9c Linus Torvalds 17 October 2015, 00:39:27 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI 17 October 2015, 00:39:27 UTC
4f3f957 Linus Torvalds 17 October 2015, 00:11:14 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "Just one revert for Armada XP devices: the conversion to of_clk_get_parent_name() wasn't a direct translation, so we revert back to of_clk_get() + __clk_get_name(). We could make of_clk_get_parent_name() more robust, but that may have unintended side-effects, so we'll do that in the next version" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Partially revert "clk: mvebu: Convert to clk_hw based provider APIs" 17 October 2015, 00:11:14 UTC
045ce74 Linus Torvalds 16 October 2015, 20:03:05 UTC Merge tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Two DM target error path cleanup fixes (one for stable in DM thinp and one for a v4.3-rc5 thinko in DM snapshot)" * tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix missing pool reference count decrement in pool_ctr error path dm snapshot persistent: fix missing cleanup in persistent_ctr error path 16 October 2015, 20:03:05 UTC
6aa8ca4 Linus Torvalds 16 October 2015, 19:55:34 UTC Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I have two more bug fixes for btrfs. My commit fixes a bug we hit last week at FB, a combination of lots of hard links and an admin command to resolve inode numbers. Dave is adding checks to make sure balance on current kernels ignores filters it doesn't understand. The penalty for being wrong is just doing more work (not crashing etc), but it's a good fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix use after free iterating extrefs btrfs: check unsupported filters in balance arguments 16 October 2015, 19:55:34 UTC
59bcce1 Linus Torvalds 16 October 2015, 19:47:02 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "Just two small items from Ilya: The first patch fixes the RBD readahead to grab full objects. The second fixes the write ops to prevent undue promotion when a cache tier is configured on the server side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use writefull op for object size writes rbd: set max_sectors explicitly 16 October 2015, 19:47:02 UTC
a4c4c49 Linus Torvalds 16 October 2015, 19:25:54 UTC Merge tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These fix two recent regressions (ACPICA, the generic power domains framework) and one crash that may happen on specific hardware supported since 4.1 (intel_pstate). Specifics: - Fix a regression introduced by a recent ACPICA cleanup that uncovered a latent bug (Lv Zheng). - Fix a recent regression in the generic power domains framework that may cause it to violate PM QoS latency constraints in some cases (Ulf Hansson). - Fix an intel_pstate driver crash on the Knights Landing chips that do not update the MPERF counter as often as expected by the driver which may result in a divide by 0 (Srinivas Pandruvada)" * tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) ACPICA: Tables: Fix FADT dependency regression PM / Domains: Fix validation of latency constraints in genpd governor 16 October 2015, 19:25:54 UTC
8b7b56f Linus Torvalds 16 October 2015, 19:19:11 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too crazy or exciting: - two MAINTAINERS entries that I didn't see the point in delaying. - one drm mst fix to stop sending uninitialised data to monitors - two amdgpu fixes - one radeon mst tiling fix - one vmwgfx regression fix - one virtio warning fix. I have found one locking problem that needs a bit of reorg to fix, but I'm not sure it's worth putting in -fixes as I don't think we've seen it hit in the real world ever, I just found it using the virtio-gpu driver when working on it. I'll possibly send it next week once I've time to discuss with Daniel" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/virtio: use %llu format string form atomic64_t MAINTAINERS: Add myself as maintainer for the gma500 driver MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2) drm/dp/mst: make mst i2c transfer code more robust. drm/radeon: attach tile property to mst connector drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware 16 October 2015, 19:19:11 UTC
ebb65c8 Linus Torvalds 16 October 2015, 19:07:43 UTC Merge tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Re-enable CONFIG_SCSI_DH in our defconfigs - Remove unused os_area_db_id_video_mode - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew - cxl: Workaround malformed pcie packets on some cards from Philippe - cxl: Fix number of allocated pages in SPA from Christophe Lombard - Fix checkstop in native_hpte_clear() with lockdep from Cyril - Panic on unhandled Machine Check on powernv from Daniel - selftests/powerpc: Fix build failure of load_unaligned_zeropad test * tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure of load_unaligned_zeropad test powerpc/powernv: Panic on unhandled Machine Check powerpc: Fix checkstop in native_hpte_clear() with lockdep cxl: Fix number of allocated pages in SPA cxl: Workaround malformed pcie packets on some cards cxl: fix leak of ctx->mapping when releasing kernel API contexts cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API cxl: fix leak of IRQ names in cxl_free_afu_irqs() powerpc/ps3: Remove unused os_area_db_id_video_mode powerpc/configs: Re-enable CONFIG_SCSI_DH 16 October 2015, 19:07:43 UTC
3d87518 Linus Torvalds 16 October 2015, 18:42:37 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: sh: add copy_user_page() alias for __copy_user() lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE mm, dax: fix DAX deadlocks memcg: convert threshold to bytes builddeb: remove debian/files before build mm, fs: obey gfp_mapping for add_to_page_cache() 16 October 2015, 18:42:37 UTC
934ed25 Ross Zwisler 15 October 2015, 22:28:38 UTC sh: add copy_user_page() alias for __copy_user() copy_user_page() is needed by DAX. Without this we get a compile error for DAX on SH: fs/dax.c:280:2: error: implicit declaration of function `copy_user_page' [-Werror=implicit-function-declaration] copy_user_page(vto, (void __force *)vfrom, vaddr, to); ^ This was done with a random config that happened to include DAX support. This patch has only been compile tested. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2015, 18:42:28 UTC
1fd4e5c Andrew Morton 15 October 2015, 22:28:35 UTC lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE lib/built-in.o: In function `__bitrev32': deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table' Anything which uses bitrevX() has to select BITREVERSE, to grab lib/bitrev.o. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2015, 18:42:28 UTC
0f90cc6 Ross Zwisler 15 October 2015, 22:28:32 UTC mm, dax: fix DAX deadlocks The following two locking commits in the DAX code: commit 843172978bb9 ("dax: fix race between simultaneous faults") commit 46c043ede471 ("mm: take i_mmap_lock in unmap_mapping_range() for DAX") introduced a number of deadlocks and other issues which need to be fixed for the v4.3 kernel. The list of issues in DAX after these commits (some newly introduced by the commits, some preexisting) can be found here: https://lkml.org/lkml/2015/9/25/602 (Subject: "Re: [PATCH] dax: fix deadlock in __dax_fault"). This undoes most of the changes introduced by those two commits, essentially returning us to the DAX locking scheme that was used in v4.2. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Tested-by: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2015, 18:42:28 UTC
424cdc1 Shaohua Li 15 October 2015, 22:28:29 UTC memcg: convert threshold to bytes page_counter_memparse() returns pages for the threshold, while mem_cgroup_usage() returns bytes for memory usage. Convert the threshold to bytes. Fixes: 3e32cb2e0a12b6915 ("memcg: rename cgroup_event to mem_cgroup_event"). Signed-off-by: Shaohua Li <shli@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2015, 18:42:28 UTC
8d740a3 Riku Voipio 15 October 2015, 22:28:26 UTC builddeb: remove debian/files before build Commit 3716001bcb7f ("deb-pkg: add source package") added the ability to create a debian changelog file. This exposed that previously the builddeb script hasn't cleared debian/files between builds. As debian/files keeps accumulating entries, the changes file will end up growing indefinelty. With outdated entries in debian/files, builddeb script will exit with failure. This regression impacts those who use "make deb-pkg" target to build kernel into a .deb package and never use "make mrproper" or other means to clean kernel tree from generated directories. To fix the regression, remove debian/files before starting build and in the generated clean rule. Fixes: 3716001bcb7f ("deb-pkg: add source package") Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reported-by: Doug Smythies <dsmythies@telus.net> Tested-by: Doug Smythies <dsmythies@telus.net> Tested-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Ben Hutchings <ben@decadent.org.uk> Cc: Michal Marek <mmarek@suse.cz> Cc: maximilian attems <maks@stro.at> Cc: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2015, 18:42:28 UTC
063d99b Michal Hocko 15 October 2015, 22:28:24 UTC mm, fs: obey gfp_mapping for add_to_page_cache() Commit 6afdb859b710 ("mm: do not ignore mapping_gfp_mask in page cache allocation paths") has caught some users of hardcoded GFP_KERNEL used in the page cache allocation paths. This, however, wasn't complete and there were others which went unnoticed. Dave Chinner has reported the following deadlock for xfs on loop device: : With the recent merge of the loop device changes, I'm now seeing : XFS deadlock on my single CPU, 1GB RAM VM running xfs/073. : : The deadlocked is as follows: : : kloopd1: loop_queue_read_work : xfs_file_iter_read : lock XFS inode XFS_IOLOCK_SHARED (on image file) : page cache read (GFP_KERNEL) : radix tree alloc : memory reclaim : reclaim XFS inodes : log force to unpin inodes : <wait for log IO completion> : : xfs-cil/loop1: <does log force IO work> : xlog_cil_push : xlog_write : <loop issuing log writes> : xlog_state_get_iclog_space() : <blocks due to all log buffers under write io> : <waits for IO completion> : : kloopd1: loop_queue_write_work : xfs_file_write_iter : lock XFS inode XFS_IOLOCK_EXCL (on image file) : <wait for inode to be unlocked> : : i.e. the kloopd, with it's split read and write work queues, has : introduced a dependency through memory reclaim. i.e. that writes : need to be able to progress for reads make progress. : : The problem, fundamentally, is that mpage_readpages() does a : GFP_KERNEL allocation, rather than paying attention to the inode's : mapping gfp mask, which is set to GFP_NOFS. : : The didn't used to happen, because the loop device used to issue : reads through the splice path and that does: : : error = add_to_page_cache_lru(page, mapping, index, : GFP_KERNEL & mapping_gfp_mask(mapping)); This has changed by commit aa4d86163e4 ("block: loop: switch to VFS ITER_BVEC"). This patch changes mpage_readpage{s} to follow gfp mask set for the mapping. There are, however, other places which are doing basically the same. lustre:ll_dir_filler is doing GFP_KERNEL from the function which apparently uses GFP_NOFS for other allocations so let's make this consistent. cifs:readpages_get_pages is called from cifs_readpages and __cifs_readpages_from_fscache called from the same path obeys mapping gfp. ramfs_nommu_expand_for_mapping is hardcoding GFP_KERNEL as well regardless it uses mapping_gfp_mask for the page allocation. ext4_mpage_readpages is the called from the page cache allocation path same as read_pages and read_cache_pages As I've noticed in my previous post I cannot say I would be happy about sprinkling mapping_gfp_mask all over the place and it sounds like we should drop gfp_mask argument altogether and use it internally in __add_to_page_cache_locked that would require all the filesystems to use mapping gfp consistently which I am not sure is the case here. From a quick glance it seems that some file system use it all the time while others are selective. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dave Chinner <david@fromorbit.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Ming Lei <ming.lei@canonical.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2015, 18:42:28 UTC
e30b757 Ilya Dryomov 07 October 2015, 15:27:17 UTC rbd: use writefull op for object size writes This covers only the simplest case - an object size sized write, but it's still useful in tiering setups when EC is used for the base tier as writefull op can be proxied, saving an object promotion. Even though updating ceph_osdc_new_request() to allow writefull should just be a matter of fixing an assert, I didn't do it because its only user is cephfs. All other sites were updated. Reflects ceph.git commit 7bfb7f9025a8ee0d2305f49bf0336d2424da5b5b. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> 16 October 2015, 14:49:01 UTC
0d9fde4 Ilya Dryomov 07 October 2015, 14:09:35 UTC rbd: set max_sectors explicitly Commit 30e2bc08b2bb ("Revert "block: remove artifical max_hw_sectors cap"") restored a clamp on max_sectors. It's now 2560 sectors instead of 1024, but it's not good enough: we set max_hw_sectors to rbd object size because we don't want object sized I/Os to be split, and the default object size is 4M. So, set max_sectors to max_hw_sectors in rbd at queue init time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> 16 October 2015, 14:48:36 UTC
56fd16c Thomas Gleixner 16 October 2015, 13:50:22 UTC timekeeping: Increment clock_was_set_seq in timekeeping_init() timekeeping_init() can set the wall time offset, so we need to increment the clock_was_set_seq counter. That way hrtimers will pick up the early offset immediately. Otherwise on a machine which does not set wall time later in the boot process the hrtimer offset is stale at 0 and wall time timers are going to expire with a delay of 45 years. Fixes: 868a3e915f7f "hrtimer: Make offset update smarter" Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stefan Liebler <stli@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> 16 October 2015, 13:50:22 UTC
fa54823 Rafael J. Wysocki 16 October 2015, 12:32:27 UTC Merge branches 'acpica', 'pm-domains' and 'pm-cpufreq' * acpica: ACPICA: Tables: Fix FADT dependency regression * pm-domains: PM / Domains: Fix validation of latency constraints in genpd governor * pm-cpufreq: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) 16 October 2015, 12:32:27 UTC
0701c53 Marc Zyngier 13 October 2015, 18:14:45 UTC genirq/msi: Do not use pci_msi_[un]mask_irq as default methods When we create a generic MSI domain, that MSI_FLAG_USE_DEF_CHIP_OPS is set, and that any of .mask or .unmask are NULL in the irq_chip structure, we set them to pci_msi_[un]mask_irq. This is a bad idea for at least two reasons: - PCI_MSI might not be selected, kernel fails to build (yes, this is legitimate, at least on arm64!) - This may not be a PCI/MSI domain at all (platform MSI, for example) Either way, this looks wrong. Move the overriding of mask/unmask to the PCI counterpart, and panic is any of these two methods is not set in the core code (they really should be present). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1444760085-27857-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 16 October 2015, 10:40:43 UTC
d549f54 Arnd Bergmann 07 October 2015, 10:41:21 UTC drm/virtio: use %llu format string form atomic64_t The virtgpu driver prints the last_seq variable using the %ld or %lu format string, which does not work correctly on all architectures and causes this compiler warning on ARM: drivers/gpu/drm/virtio/virtgpu_fence.c: In function 'virtio_timeline_value_str': drivers/gpu/drm/virtio/virtgpu_fence.c:64:22: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'long long int' [-Wformat=] snprintf(str, size, "%lu", atomic64_read(&fence->drv->last_seq)); ^ drivers/gpu/drm/virtio/virtgpu_debugfs.c: In function 'virtio_gpu_debugfs_irq_info': drivers/gpu/drm/virtio/virtgpu_debugfs.c:37:16: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'long long int' [-Wformat=] seq_printf(m, "fence %ld %lld\n", ^ In order to avoid the warnings, this changes the format strings to %llu and adds a cast to u64, which makes it work the same way everywhere. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 October 2015, 01:36:36 UTC
ba2199a Patrik Jakobsson 12 October 2015, 21:14:44 UTC MAINTAINERS: Add myself as maintainer for the gma500 driver Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 October 2015, 01:31:17 UTC
99763bb Boris BREZILLON 13 October 2015, 09:55:42 UTC MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver Add myself as the maintainer of the atmel-hlcdc DRM driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 October 2015, 01:30:18 UTC
57606c7 Dave Airlie 16 October 2015, 00:01:24 UTC Merge branch 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Just two fixes for amdgpu: - fix pageflip interrupt issue - fix display clock handling on certain fiji boards * 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2) 16 October 2015, 00:01:24 UTC
b2293cb Dave Airlie 15 October 2015, 22:10:21 UTC Merge tag 'vmwgfx-fixes-4.3-151014' of git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2015-10-14 * tag 'vmwgfx-fixes-4.3-151014' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware 15 October 2015, 22:10:21 UTC
69984b6 Linus Torvalds 15 October 2015, 21:03:38 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here are a few more arm64 fixes for 4.3. Again, nothing too significant, but worth having nonetheless. The MINSIGSTKSZ update is a bit grotty, but the value we currently have is wrong (too small), so anybody using that will have issues already. It has Arnd's ack for the asm-generic change. Summary: - Fix module CFLAGS setting in workaround for erratum #843419 - Update MINSIGSTKSZ and SIGSTKSZ to match glibc - Wire up some new compat syscalls" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: wire up new syscalls arm64: Fix MINSIGSTKSZ and SIGSTKSZ arm64: errata: use KBUILD_CFLAGS_MODULE for erratum #843419 15 October 2015, 21:03:38 UTC
3155823 Linus Torvalds 15 October 2015, 20:58:22 UTC Merge tag 'pinctrl-v4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Here are some overdue (what can I say, I was on a short vacation) driver fixes for the pin control subsystem: - Allwinner sun5i A10s had a faulty mapping - Freescale i.MX25 had some bad arithmetics - Uniphier PH1-sLD8 missed some input enable settings" * tag 'pinctrl-v4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: uniphier: fix input enable settings for PH1-sLD8 pinctrl: imx25: ensure that a pin with id i is at position i in the info array pinctrl: sun5i: Fix a10s pwm1 pinctrl mapping 15 October 2015, 20:58:22 UTC
8e601a9 Srinivas Pandruvada 15 October 2015, 19:34:21 UTC cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) This is a workaround for KNL platform, where in some cases MPERF counter will not have updated value before next read of MSR_IA32_MPERF. In this case divide by zero will occur. This change ignores current sample for busy calculation in this case. Fixes: b34ef932d79a (intel_pstate: Knights Landing support) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 15 October 2015, 20:46:33 UTC
58bd6e0 Linus Torvalds 15 October 2015, 20:44:35 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "We have four batched up patches for the current rc kernel. Two of them are small fixes that are obvious. One of them is larger than I would like for a late stage rc pull, but we found an issue in the namespace lookup code related to RoCE and this works around the issue for now (we allow a lookup with a namespace to succeed on RoCE since RoCE namespaces aren't implemented yet). This will go away in 4.4 when we put in support for namespaces in RoCE devices. The last one is large in terms of lines, but is all legal and no functional changes. Cisco needed to update their files to be more specific about their license. They had intended the files to be dual licensed as GPL/BSD all along, and specified that in their module license tag, but their file headers were not up to par. They contacted all of the contributors to get agreement and then submitted a patch to update the license headers in the files. Summary: - Work around connection namespace lookup bug related to RoCE - Change usnic license to Dual GPL/BSD (was intended to be that way all along, but wasn't clear, permission from contributors was chased down) - Fix an issue between NFSoRDMA and mlx5 that could cause an oops - Fix leak of sendonly multicast groups" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ipoib: For sendonly join free the multicast group on leave IB/cma: Accept connection without a valid netdev on RoCE xprtrdma: Don't require LOCAL_DMA_LKEY support for fastreg usnic: add missing clauses to BSD license 15 October 2015, 20:44:35 UTC
c7823b6 Linus Torvalds 15 October 2015, 20:31:00 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext4 Kconfig description fixup from Jan Kara: "A small fixup in description of EXT4_USE_FOR_EXT2 config option" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext4: Update EXT4_USE_FOR_EXT2 description 15 October 2015, 20:31:00 UTC
176bed1 Linus Torvalds 15 October 2015, 20:01:50 UTC vmstat: explicitly schedule per-cpu work on the CPU we need it to run on The vmstat code uses "schedule_delayed_work_on()" to do the initial startup of the delayed work on the right CPU, but then once it was started it would use the non-cpu-specific "schedule_delayed_work()" to re-schedule it on that CPU. That just happened to schedule it on the same CPU historically (well, in almost all situations), but the code _requires_ this work to be per-cpu, and should say so explicitly rather than depend on the non-cpu-specific scheduling to schedule on the current CPU. The timer code is being changed to not be as single-minded in always running things on the calling CPU. See also commit 874bbfe600a6 ("workqueue: make sure delayed work run in local cpu") that for now maintains the local CPU guarantees just in case there are other broken users that depended on the accidental behavior. Cc: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 October 2015, 20:01:50 UTC
995e2fe Linus Torvalds 15 October 2015, 19:58:37 UTC Merge branch 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixlet from Tejun Heo: "Single patch to make delayed work always be queued on the local CPU" This is not actually something we should guarantee, but it's something we by accident have historically done, and at least one call site has grown to depend on it. I'm going to fix that known broken callsite, but in the meantime this makes the accidental behavior be explicit, just in case there are other cases that might depend on it. * 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure delayed work run in local cpu 15 October 2015, 19:58:37 UTC
fc531d9 Wolfram Sang 15 October 2015, 13:50:15 UTC MAINTAINERS: add maintainers for Synopsis Designware I2C drivers Those guys already have been helpful in the past and are actively working on this driver, unlike me. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> 15 October 2015, 16:36:15 UTC
f6c7aba Michel Dänzer 08 October 2015, 08:48:04 UTC drm/amdgpu: Keep the pflip interrupts always enabled v7 This fixes flickering issues caused by prematurely firing pflip interrupts. v2 (chk): add commit message, fix DCE V10/V11 and DM as well v3: Re-enable pflip interrupt wherever we re-enable a CRTC v4: Enable pflip interrupt in DAL as well v5: drop DAL changes for upstream v6: (agd): only enable interrupts on crtcs that exist v7: (agd): integrate suggestions from Michel Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 15 October 2015, 14:04:50 UTC
80c083c Alex Deucher 12 October 2015, 14:38:02 UTC drm/amdgpu: adjust default dispclk (v2) Set the default to 600Mhz if it's not set in the bios, and bump the default to 600Mhz if it's lower than that. Port of radeon commit: 9368931db826d57b6b88b3145a00276626b48df0 v2: clean up the code a bit bug: https://bugs.freedesktop.org/show_bug.cgi?id=91896 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 15 October 2015, 14:04:13 UTC
36d48fb Wolfram Sang 09 October 2015, 09:39:24 UTC i2c: designware-platdrv: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@kernel.org 15 October 2015, 12:28:07 UTC
eadd709 Wolfram Sang 10 October 2015, 07:24:23 UTC i2c: s3c2410: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 15 October 2015, 12:26:07 UTC
4f7effd Wolfram Sang 09 October 2015, 09:39:25 UTC i2c: rcar: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 15 October 2015, 12:25:56 UTC
74cedd3 Kieran Bingham 12 October 2015, 20:54:43 UTC i2c: return probe deferred status on dev_pm_domain_attach A change of return status was introduced in commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") The commit prevents the defer status being passed up the call stack appropriately when dev_pm_domain_attach returns -EPROBE_DEFER. Catch the PROBE_DEFER and clear up the IRQ wakeup status Signed-off-by: Kieran Bingham <kieranbingham@gmail.com> Fixes: 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 15 October 2015, 11:35:32 UTC
ae49154 Dave Airlie 14 October 2015, 08:51:17 UTC drm/dp/mst: make mst i2c transfer code more robust. This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> 14 October 2015, 23:06:20 UTC
bc8c131 Dave Airlie 14 October 2015, 23:04:21 UTC drm/radeon: attach tile property to mst connector This allows tiled monitors to work with radeon once mst is enabled. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 14 October 2015, 23:05:17 UTC
62fcce9 Lv Zheng 14 October 2015, 05:53:57 UTC ACPICA: Tables: Fix FADT dependency regression Some logics actually relying on the existence of FADT, currently relies on the number of loaded tables. This false dependency can easily trigger regressions. One of them has been introduced by commit 8ec3f459073e (ACPICA: Tables: Fix global table list issues by removing fixed table). The commit changing the fixed table indexes results in the change of FADT table index, originally, it was 3 (thus the installed table count should be greater than 4), while currently it is 0 (and the installed table count may be 3). This patch fixes this regression by cleaning up the code. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=105351 Fixes: 8ec3f459073e (ACPICA: Tables: Fix global table list issues by removing fixed table) Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 14 October 2015, 20:48:13 UTC
back to top