Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 11:00:25 UTC
sort by:
Revision Author Date Message Commit Date
2d5f6a8 Peilin Ye 11 June 2023, 03:30:15 UTC net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs Grafting ingress and clsact Qdiscs does not need a for-loop in qdisc_graft(). Refactor it. No functional changes intended. Tested-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 14 June 2023, 08:31:39 UTC
41f2c7c Paul Blakey 09 June 2023, 12:22:59 UTC net/sched: act_ct: Fix promotion of offloaded unreplied tuple Currently UNREPLIED and UNASSURED connections are added to the nf flow table. This causes the following connection packets to be processed by the flow table which then skips conntrack_in(), and thus such the connections will remain UNREPLIED and UNASSURED even if reply traffic is then seen. Even still, the unoffloaded reply packets are the ones triggering hardware update from new to established state, and if there aren't any to triger an update and/or previous update was missed, hardware can get out of sync with sw and still mark packets as new. Fix the above by: 1) Not skipping conntrack_in() for UNASSURED packets, but still refresh for hardware, as before the cited patch. 2) Try and force a refresh by reply-direction packets that update the hardware rules from new to established state. 3) Remove any bidirectional flows that didn't failed to update in hardware for re-insertion as bidrectional once any new packet arrives. Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections") Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 14 June 2023, 07:56:50 UTC
07b1cc8 Jakub Kicinski 14 June 2023, 03:49:16 UTC Merge branch 'fix-small-bugs-and-annoyances-in-tc-testing' Vlad Buslov says: ==================== Fix small bugs and annoyances in tc-testing ==================== Link: https://lore.kernel.org/r/20230612075712.2861848-1-vladbu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 June 2023, 03:49:16 UTC
11b8b2e Vlad Buslov 12 June 2023, 07:57:12 UTC selftests/tc-testing: Remove configs that no longer exist Some qdiscs and classifiers have recently been retired from kernel. However, tc-testing config is still cluttered with them which causes noise when using merge_config.sh script to update existing config for tc-testing compatibility. Remove the config settings for affected qdiscs and classifiers. Fixes: fb38306ceb9e ("net/sched: Retire ATM qdisc") Fixes: 051d44209842 ("net/sched: Retire CBQ qdisc") Fixes: bbe77c14ee61 ("net/sched: Retire dsmark qdisc") Fixes: 265b4da82dbf ("net/sched: Retire rsvp classifier") Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 June 2023, 03:49:14 UTC
b39d8c4 Vlad Buslov 12 June 2023, 07:57:11 UTC selftests/tc-testing: Fix SFB db test Setting very small value of db like 10ms introduces rounding errors when converting to/from jiffies on some kernel configs. For example, on 250hz the actual value will be set to 12ms which causes the test to fail: # $ sudo ./tdc.py -d eth2 -e 3410 # -- ns/SubPlugin.__init__ # Test 3410: Create SFB with db setting # # All test results: # # 1..1 # not ok 1 3410 - Create SFB with db setting # Could not match regex pattern. Verify command output: # qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p Set the value to 100ms instead which currently seem to work on 100hz, 250hz, 300hz and 1000hz kernel configs. Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 June 2023, 03:49:14 UTC
b849c56 Vlad Buslov 12 June 2023, 07:57:10 UTC selftests/tc-testing: Fix Error: failed to find target LOG Add missing netfilter config dependency. Fixes following example error when running tests via tdc.sh for all XT tests: # $ sudo ./tdc.py -d eth2 -e 2029 # Test 2029: Add xt action with log-prefix # exit: 255 # exit: 0 # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # -----> teardown stage *** Could not execute: "$TC actions flush action xt" # # -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action. # We have an error flushing # " # returncode 1; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # --------------- # # All test results: # # 1..1 # ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully Fixes: 910d504bc187 ("selftests/tc-testings: add selftests for xt action") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 June 2023, 03:49:14 UTC
aef6e90 Vlad Buslov 12 June 2023, 07:57:09 UTC selftests/tc-testing: Fix Error: Specified qdisc kind is unknown. All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh before running qdisc tests. Fixes following example error when running tests via tdc.sh for all TEQL tests: # $ sudo ./tdc.py -d eth2 -e 84a0 # -- ns/SubPlugin.__init__ # Test 84a0: Create TEQL with default setting # exit: 2 # exit: 0 # Error: Specified qdisc kind is unknown. # # -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root" # # -----> teardown stage *** Error message: "Error: Invalid handle. # " # returncode 2; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # Error: Specified qdisc kind is unknown. # # --------------- # # All test results: # # 1..1 # ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully Fixes: cc62fbe114c9 ("selftests/tc-testing: add selftests for teql qdisc") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 June 2023, 03:49:14 UTC
374283a Dan Carpenter 12 June 2023, 07:18:50 UTC net: ethernet: ti: am65-cpsw: Call of_node_put() on error path This code returns directly but it should instead call of_node_put() to drop some reference counts. Fixes: dab2b265dd23 ("net: ethernet: ti: am65-cpsw: Add support for SERDES configuration") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/e3012f0c-1621-40e6-bf7d-03c276f6e07f@kili.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 June 2023, 03:47:03 UTC
fbf6f48 Jakub Kicinski 12 June 2023, 23:55:45 UTC Merge branch 'mptcp-fixes' Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 3) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition to that, the current MPTCP selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftest or just some sub-tests before starting them. This cannot be applied in all cases. Similar to the second part, this third one focuses on marking different sub-tests as skipped if some MPTCP features are not supported. This time, only in "mptcp_join.sh" selftest, the remaining one, is modified. Several techniques are used here to achieve this task: - Before starting some tests: - Check if a file (sysctl knob) is present: that's what patch 12/17 is doing for the userspace PM feature. - Check if a required kernel symbol is present in /proc/kallsyms: patches 9, 10, 14 and 15/17 are using this technique. - Check if it is possible to setup a particular network environment requiring Netfilter or TC: if the preparation step fail, the linked sub-test is marked as skipped. Patch 5/17 is doing that. - Check if a MIB counter is available: patches 7 and 13/17 do that. - Check if the kernel version is newer than a specific one: patch 1/17 adds some helpers in mptcp_lib.sh to ease its use. That's not ideal and it is only used as last resort but as mentioned above, it is important to skip tests if they are not supported not to have the whole selftest always being marked as failed on old kernels. Patches 11 and 17/17 are checking the kernel version. An alternative would be to ignore the results for some sub-tests but that's not ideal too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be set to 1 not to skip these tests if the running kernel doesn't have a supported version. - After having launched the tests: - Adapt the expectations depending on the presence of a kernel symbol (patch 6/17) or a kernel version (patch 8/17). - Check is a MIB counter is available and skip the verification if not. Patch 4/17 is using this technique. Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var value is checked: if it is set to 1, the test is marked as "failed" instead of "skipped". MPTCP public CI expects to have all features supported and it sets this env var to 1 to catch regressions in these new checks. Patch 2/17 uses 'iptables-legacy' if available because it might be needed when using an older kernel not supporting iptables-nft. Patch 3/17 adds some helpers used in the other patches mentioned to easily mark sub-tests as skipped. Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code from userspace_pm.sh but without using the "code style" and ways of using tools and printing messages from MPTCP Join selftest. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:45 UTC
6673851 Matthieu Baerts 10 June 2023, 16:11:52 UTC selftests: mptcp: join: skip mixed tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of a mix of subflows in v4 and v6 by the in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addresses"). It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:43 UTC
96b8419 Matthieu Baerts 10 June 2023, 16:11:51 UTC selftests: mptcp: join: uniform listener tests The alignment was different from the other tests because tabs were used instead of spaces. While at it, also use 'echo' instead of 'printf' to print the result to keep the same style as done in the other sub-tests. And, even if it should be better with, also remove 'stdbuf' and sed's '--unbuffered' option because they are not used in the other subtests and they are not available when using a minimal environment with busybox. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:43 UTC
0471bb4 Matthieu Baerts 10 June 2023, 16:11:50 UTC selftests: mptcp: join: skip PM listener tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of PM listener events introduced by commit f8c9dfbd875b ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:43 UTC
632978f Matthieu Baerts 10 June 2023, 16:11:49 UTC selftests: mptcp: join: skip MPC backups tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of sending an MP_PRIO signal for the initial subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel PM to set MPC subflow priority"). It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
ff8897b Matthieu Baerts 10 June 2023, 16:11:48 UTC selftests: mptcp: join: skip fail tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the MP_FAIL / infinite mapping introduced by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the following ones. It is possible to look for one of the infinite mapping counters to know in advance if the this feature is available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase") Cc: stable@vger.kernel.org Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
f2b492b Matthieu Baerts 10 June 2023, 16:11:47 UTC selftests: mptcp: join: skip userspace PM tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the userspace PM introduced by commit 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs") and the following ones. It is possible to look for the MPTCP pm_type's sysctl knob to know in advance if the userspace PM is available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
9db34c4 Matthieu Baerts 10 June 2023, 16:11:46 UTC selftests: mptcp: join: skip fullmesh flag tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the fullmesh flag for the in-kernel PM introduced by commit 2843ff6f36db ("mptcp: remote addresses fullmesh") and commit 1a0d6136c5f0 ("mptcp: local addresses fullmesh"). It looks like there is no easy external sign we can use to predict the expected behaviour. We could add the flag and then check if it has been added but for that, and for each fullmesh test, we would need to setup a new environment, do the checks, clean it and then only start the test from yet another clean environment. To keep it simple and avoid introducing new issues, we look for a specific kernel version. That's not ideal but an acceptable solution for this case. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6a0653b96f5d ("selftests: mptcp: add fullmesh setting tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
07216a3 Matthieu Baerts 10 June 2023, 16:11:45 UTC selftests: mptcp: join: skip backup if set flag on ID not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Commit bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint") has simplified the way the backup flag is set on an endpoint. Instead of doing: ./pm_nl_ctl set 10.0.2.1 flags backup Now we do: ./pm_nl_ctl set id 1 flags backup The new way is easier to maintain but it is also incompatible with older kernels not supporting the implicit endpoints putting in place the infrastructure to set flags per ID, hence the second Fixes tag. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint") Cc: stable@vger.kernel.org Fixes: 4cf86ae84c71 ("mptcp: strict local address ID selection") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
36c4127 Matthieu Baerts 10 June 2023, 16:11:44 UTC selftests: mptcp: join: skip implicit tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of the implicit endpoints introduced by commit d045b9eb95a9 ("mptcp: introduce implicit endpoints"). It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results. Note that here and in the following commits, we re-do the same check for each sub-test of the same function for a few reasons. The main one is not to break the ID assign to each test in order to be able to easily compare results between different kernel versions. Also, we can still run a specific test even if it is skipped. Another reason is that it makes it clear during the review that a specific subtest will be skipped or not under certain conditions. At the end, it looks OK to call the exact same helper multiple times: it is not a critical path and it is the same code that is executed, not really more cases to maintain. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
425ba80 Matthieu Baerts 10 June 2023, 16:11:43 UTC selftests: mptcp: join: support RM_ADDR for used endpoints or not Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a UAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features. It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
ae947bb Matthieu Baerts 10 June 2023, 16:11:42 UTC selftests: mptcp: join: skip Fastclose tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of MP_FASTCLOSE introduced in commit f284c0c77321 ("mptcp: implement fastclose xmit path"). If the MIB counter is not available, the test cannot be verified and the behaviour will not be the expected one. So we can skip the test if the counter is missing. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
d4c81bb Matthieu Baerts 10 June 2023, 16:11:41 UTC selftests: mptcp: join: support local endpoint being tracked or not Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a uAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features. It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance what the behaviour we are expecting here instead of supporting the two behaviours. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
4a0b866 Matthieu Baerts 10 June 2023, 16:11:40 UTC selftests: mptcp: join: skip test if iptables/tc cmds fail Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Some tests are using IPTables and/or TC commands to force some behaviours. If one of these commands fails -- likely because some features are not available due to missing kernel config -- we should intercept the error and skip the tests requiring these features. Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped. This patch also replaces the 'exit 1' by 'return 1' not to stop the selftest in the middle without the conclusion if there is an issue with NF or TC. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
47867f0 Matthieu Baerts 10 June 2023, 16:11:39 UTC selftests: mptcp: join: skip check if MIB counter not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP MIB counters introduced in commit fc518953bc9c ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters. If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added to do the required checks and return an error if the counter is not available. Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped. This new helper also makes sure we get the exact counter we want to avoid issues we had in the past, e.g. with MPTcpExtRmAddr and MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the way we fetch a MIB counter. Note for the backports: we rarely change these modified blocks so if there is are conflicts, it is very likely because a counter is not used in the older kernels and we don't need that chunk. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
cdb5052 Matthieu Baerts 10 June 2023, 16:11:38 UTC selftests: mptcp: join: helpers to skip tests Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. Here are some helpers that will be used to mark subtests as skipped if a feature is not supported. Marking as a fix for the commit introducing this selftest to help with the backports. While at it, also check if kallsyms feature is available as it will also be used in the following commits to check if MPTCP features are available before starting a test. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
0c4cd3f Matthieu Baerts 10 June 2023, 16:11:37 UTC selftests: mptcp: join: use 'iptables-legacy' if available IPTables commands using 'iptables-nft' fail on old kernels, at least 5.15 because it doesn't see the default IPTables chains: $ iptables -L iptables/1.8.2 Failed to initialize nft: Protocol not supported As a first step before switching to NFTables, we can use iptables-legacy if available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
b1a6a38 Matthieu Baerts 10 June 2023, 16:11:36 UTC selftests: mptcp: lib: skip if not below kernel version Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. A new function is now available to easily detect if a feature is missing by looking at the kernel version. That's clearly not ideal and this kind of check should be avoided as soon as possible. But sometimes, there are no external sign that a "feature" is available or not: internal behaviours can change without modifying the uAPI and these selftests are verifying the internal behaviours. Sometimes, the only (easy) way to verify if the feature is present is to run the test but then the validation cannot determine if there is a failure with the feature or if the feature is missing. Then it looks better to check the kernel version instead of having tests that can never fail. In any case, we need a solution not to have a whole selftest being marked as failed just because one sub-test has failed. Note that this env var car be set to 1 not to do such check and run the linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK. This new helper is going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:55:42 UTC
4d17beb Jakub Kicinski 12 June 2023, 23:51:22 UTC Merge branch 'fixes-for-q-usgmii-speeds-and-autoneg' Maxime Chevallier says: ==================== fixes for Q-USGMII speeds and autoneg This is the second version of a small changeset for QUSGMII support, fixing inconsistencies in reported max speed and control word parsing. As reported here [1], there are some inconsistencies for the Q-USGMII mode speeds and configuration. The first patch in this fixup series makes so that we correctly report the max speed of 1Gbps for this mode. The second patch uses a dedicated helper to decode the control word. This is necessary as although USGMII control words are close to USXGMII, they don't support the same speeds. [1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/ ==================== Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:51:22 UTC
923454c Maxime Chevallier 09 June 2023, 08:03:05 UTC net: phylink: use a dedicated helper to parse usgmii control word Q-USGMII is a derivative of USGMII, that uses a specific formatting for the control word. The layout is close to the USXGMII control word, but doesn't support speeds over 1Gbps. Use a dedicated decoding logic for the USGMII control word, re-using USXGMII definitions but only considering 10/100/1000Mbps speeds Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:51:20 UTC
b9dc104 Maxime Chevallier 09 June 2023, 08:03:04 UTC net: phylink: report correct max speed for QUSGMII Q-USGMII is the quad port version of USGMII, and supports a max speed of 1Gbps on each line. Make so that phylink_interface_max_speed() reports this information correctly. Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 12 June 2023, 23:51:20 UTC
75e6def Dan Carpenter 09 June 2023, 11:05:19 UTC sctp: fix an error code in sctp_sf_eat_auth() The sctp_sf_eat_auth() function is supposed to enum sctp_disposition values and returning a kernel error code will cause issues in the caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM. Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 June 2023, 08:36:27 UTC
a0067df Dan Carpenter 09 June 2023, 11:04:43 UTC sctp: handle invalid error codes without calling BUG() The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition values but if the call to sctp_ulpevent_make_authkey() fails, it returns -ENOMEM. This results in calling BUG() inside the sctp_side_effects() function. Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE() instead. This code predates git. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 12 June 2023, 08:36:27 UTC
ce57adc Hangbin Liu 09 June 2023, 09:15:02 UTC ipvlan: fix bound dev checking for IPv6 l3s mode The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 June 2023, 08:34:01 UTC
52f7960 Jakub Kicinski 08 June 2023, 16:23:44 UTC net: ethtool: correct MAX attribute value for stats When compiling YNL generated code compiler complains about array-initializer-out-of-bounds. Turns out the MAX value for STATS_GRP uses the value for STATS. This may lead to random corruptions in user space (kernel itself doesn't use this value as it never parses stats). Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 12 June 2023, 07:50:48 UTC
7ebe4ed David Christensen 08 June 2023, 20:01:43 UTC bnx2x: fix page fault following EEH recovery In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference. This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 June 2023, 19:07:10 UTC
65d8bd8 David S. Miller 10 June 2023, 18:57:03 UTC Merge tag 'nf-23-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf netfilter pull request 23-06-08 Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Add commit and abort set operation to pipapo set abort path. 2) Bail out immediately in case of ENOMEM in nfnetlink batch. 3) Incorrect error path handling when creating a new rule leads to dangling pointer in set transaction list. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 10 June 2023, 18:57:03 UTC
b403643 Dmitry Mastykin 08 June 2023, 13:57:54 UTC netlabel: fix shift wrapping bug in netlbl_catmap_setlong() There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted. Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 June 2023, 18:54:06 UTC
14df952 David S. Miller 10 June 2023, 18:53:02 UTC Merge branch 'octeontx2-af-fixes' Naveen Mamindlapalli says: ==================== RVU NIX AF driver fixes This patch series contains few fixes to the RVU NIX AF driver. The first patch modifies the driver check to validate whether the req count for contiguous and non-contiguous arrays is less than the maximum limit. The second patch fixes HW lbk interface link credit programming. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 10 June 2023, 18:53:02 UTC
87e12a1 Nithin Dabilpuram 08 June 2023, 11:42:01 UTC octeontx2-af: fix lbk link credits on cn10k Fix LBK link credits on CN10K to be same as CN9K i.e 16 * MAX_LBK_DATA_RATE instead of current scheme of calculation based on LBK buf length / FIFO size. Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: Add MTU configuration") Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 June 2023, 18:53:02 UTC
4e635f9 Satha Rao 08 June 2023, 11:42:00 UTC octeontx2-af: fixed resource availability check txschq_alloc response have two different arrays to store continuous and non-continuous schedulers of each level. Requested count should be checked for each array separately. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Satha Rao <skoteshwar@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 June 2023, 18:53:02 UTC
1b8975f Jakub Kicinski 10 June 2023, 07:11:18 UTC Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-08 (ice) This series contains updates to ice driver only. Simon Horman stops null pointer dereference for GNSS error path. Kamil fixes memory leak when downing interface when XDP is enabled. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix XDP memory leak when NIC is brought up and down ice: Don't dereference NULL in ice_gnss_read error path ==================== Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:11:18 UTC
c37cf54 Ahmed Zaki 08 June 2023, 20:02:26 UTC iavf: remove mask from iavf_irq_enable_queues() Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:09:54 UTC
bc51d37 Jakub Kicinski 10 June 2023, 07:02:17 UTC Merge branch 'selftests-mptcp-skip-tests-not-supported-by-old-kernels-part-2' Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 2) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition to that, the current MPTCP selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftests or just some sub-tests before starting them. This cannot be applied in all cases. This second part focuses on marking different sub-tests as skipped if some MPTCP features are not supported. A few techniques are used here: - Before starting some tests: - Check if a file (sysctl knob) is present: that's what patch 13/14 is doing for the userspace PM feature. - Check if a symbol is present in /proc/kallsyms: patch 1/14 adds some helpers in mptcp_lib.sh to ease its use. Then these helpers are used in patches 2, 3, 4, 10, 11 and 14/14. - Set a flag and get the status to check if a feature is supported: patch 8/14 is doing that with the 'fullmesh' flag. - After having launched the tests: - Retrieve the counters after a test and check if they are different than 0. Similar to the check with the flag, that's not ideal but in this case, the counters were already present before the introduction of MPTCP but they have been supported by MPTCP sockets only later. Patches 5 and 6/14 are using this technique. Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var value is checked: if it is set to 1, the test is marked as "failed" instead of "skipped". MPTCP public CI expects to have all features supported and it sets this env var to 1 to catch regressions in these new checks. Patches 7/14 and 9/14 are a bit different because they don't skip tests: - Patch 7/14 retrieves the default values instead of using hardcoded ones because these default values have been modified at some points. Then the comparisons are done with the default values. - patch 9/14 relaxes the expected returned size from MPTCP's getsockopt because the different structures gathering various info can get new fields and get bigger over time. We cannot expect that the userspace is using the same structure as the kernel. Patch 12/14 marks the test as "skipped" instead of "failed" if the "ip" tool is not available. In this second part, the "mptcp_join" selftest is not modified yet. This will come soon after in the third part with quite a few patches. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230608-upstream-net-20230608-mptcp-selftests-support-old-kernels-part-2-v1-0-20997a6fd841@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:18 UTC
626cb7a Matthieu Baerts 08 June 2023, 16:38:56 UTC selftests: mptcp: userspace pm: skip PM listener events tests if unavailable Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the new listener events linked to the path-manager introduced by commit f8c9dfbd875b ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature and skip these sub-tests if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
f90adb0 Matthieu Baerts 08 June 2023, 16:38:55 UTC selftests: mptcp: userspace pm: skip if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP Userspace PM introduced by commit 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs"). We can skip all these tests if the feature is not supported simply by looking for the MPTCP pm_type's sysctl knob. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
723d6b9 Matthieu Baerts 08 June 2023, 16:38:54 UTC selftests: mptcp: userspace pm: skip if 'ip' tool is unavailable When a required tool is missing, the return code 4 (SKIP) should be returned instead of 1 (FAIL). Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
b631e3a Matthieu Baerts 08 June 2023, 16:38:53 UTC selftests: mptcp: sockopt: skip TCP_INQ checks if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is TCP_INQ cmsg support introduced in commit 2c9e77659a0c ("mptcp: add TCP_INQ cmsg support"). It is possible to look for "mptcp_ioctl" in kallsyms because it was needed to introduce the mentioned feature. We can skip these tests and not set TCPINQ option if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5cbd886ce2a9 ("selftests: mptcp: add TCP_INQ support") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
c6f7ecc Matthieu Baerts 08 June 2023, 16:38:52 UTC selftests: mptcp: sockopt: skip getsockopt checks if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. It is possible to look for "mptcp_diag_fill_info" in kallsyms because it is introduced by the mentioned feature. So we can know in advance if the feature is supported and skip the sub-test if not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
8dee6ca Matthieu Baerts 08 June 2023, 16:38:51 UTC selftests: mptcp: sockopt: relax expected returned size Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. We cannot guess in advance which sizes the kernel will returned: older kernel can returned smaller sizes, e.g. recently the tcp_info structure has been modified in commit 71fc704768f6 ("tcp: add rcv_wnd and plb_rehash to TCP_INFO") where a new field has been added. The userspace can also expect a smaller size if it is compiled with old uAPI kernel headers. So for these sizes, we can only check if they are above a certain threshold, 0 for the moment. We can also only compared sizes with the ones set by the kernel. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
f3761b5 Matthieu Baerts 08 June 2023, 16:38:50 UTC selftests: mptcp: pm nl: skip fullmesh flag checks if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the fullmesh flag that can be given to the MPTCP in-kernel path-manager and introduced in commit 2843ff6f36db ("mptcp: remote addresses fullmesh"). If the flag is not visible in the dump after having set it, we don't check the content. Note that if we expect to have this feature and SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always check the content to avoid regressions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6da1dfdd037e ("selftests: mptcp: add set_flags tests in pm_netlink.sh") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
2177d0b Matthieu Baerts 08 June 2023, 16:38:49 UTC selftests: mptcp: pm nl: remove hardcoded default limits Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the checks of the default limits returned by the MPTCP in-kernel path-manager. The default values have been modified by commit 72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2"). Instead of comparing with hardcoded values, we can get the default one and compare with them. Note that if we expect to have the latest version, we continue to check the hardcoded values to avoid unexpected behaviour changes. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685321b ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
dc93086 Matthieu Baerts 08 June 2023, 16:38:48 UTC selftests: mptcp: diag: skip inuse tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the reporting of the MPTCP sockets being used, introduced by commit c558246ee73e ("mptcp: add statistics for mptcp socket in use"). Similar to the parent commit, it looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info and if nothing is returned, the test is marked as skipped. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: e04a30f78809 ("selftest: mptcp: add test for mptcp socket in use") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
dc97251 Matthieu Baerts 08 June 2023, 16:38:47 UTC selftests: mptcp: diag: skip listen tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the listen diag dump support introduced by commit 4fa39b701ce9 ("mptcp: listen diag dump support"). It looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info if nothing is returned, the test is marked as skipped. That's not ideal because something could be wrong with the feature and instead of reporting an error, the test could be marked as skipped. If we know in advanced that the feature is supposed to be supported, the tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in this case the test will report an error instead of marking the test as skipped if nothing is returned. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: f2ae0fa68e28 ("selftests/mptcp: add diag listen tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
06b0308 Matthieu Baerts 08 June 2023, 16:38:46 UTC selftests: mptcp: connect: skip TFO tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of TCP_FASTOPEN socket option with MPTCP connections introduced by commit 4ffb0a02346c ("mptcp: add TCP_FASTOPEN sock option"). It is possible to look for "mptcp_fastopen_" in kallsyms to know if the feature is supported or not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ca7ae8916043 ("selftests: mptcp: mptfo Initiator/Listener") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:16 UTC
4ad39a4 Matthieu Baerts 08 June 2023, 16:38:45 UTC selftests: mptcp: connect: skip disconnect tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the full support of disconnections from the userspace introduced by commit b29fcfb54cd7 ("mptcp: full disconnect implementation"). It is possible to look for "mptcp_pm_data_reset" in kallsyms because a preparation patch added it to ease the introduction of the mentioned feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:15 UTC
07bf494 Matthieu Baerts 08 June 2023, 16:38:44 UTC selftests: mptcp: connect: skip transp tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of IP(V6)_TRANSPARENT socket option with MPTCP connections introduced by commit c9406a23c116 ("mptcp: sockopt: add SOL_IP freebind & transparent options"). It is possible to look for "__ip_sock_set_tos" in kallsyms because IP(V6)_TRANSPARENT socket option support has been added after TOS support which came with the required infrastructure in MPTCP sockopt code. To support TOS, the following function has been exported (T). Not great but better than checking for a specific kernel version. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:15 UTC
6730048 Matthieu Baerts 08 June 2023, 16:38:43 UTC selftests: mptcp: lib: skip if missing symbol Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. New functions are now available to easily detect if a certain feature is missing by looking at kallsyms. These new helpers are going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 June 2023, 07:02:15 UTC
04c5538 Lee Jones 08 June 2023, 07:29:03 UTC net/sched: cls_u32: Fix reference counter leak leading to overflow In the event of a failure in tcf_change_indev(), u32_set_parms() will immediately return without decrementing the recently incremented reference counter. If this happens enough times, the counter will rollover and the reference freed, leading to a double free which can be used to do 'bad things'. In order to prevent this, move the point of possible failure above the point where the reference counter is incremented. Also save any meaningful return values to be applied to the return data at the appropriate point in time. This issue was caught with KASAN. Fixes: 705c7091262d ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Lee Jones <lee@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 June 2023, 10:40:17 UTC
be3618d Zhengchao Shao 08 June 2023, 06:27:56 UTC net/sched: taprio: fix slab-out-of-bounds Read in taprio_dequeue_from_txq As shown in [1], out-of-bounds access occurs in two cases: 1)when the qdisc of the taprio type is used to replace the previously configured taprio, count and offset in tc_to_txq can be set to 0. In this case, the value of *txq in taprio_next_tc_txq() will increases continuously. When the number of accessed queues exceeds the number of queues on the device, out-of-bounds access occurs. 2)When packets are dequeued, taprio can be deleted. In this case, the tc rule of dev is cleared. The count and offset values are also set to 0. In this case, out-of-bounds access is also caused. Now the restriction on the queue number is added. [1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg Fixes: 2f530df76c8c ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode") Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Tested-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 June 2023, 09:48:14 UTC
c0e4893 Ratheesh Kannoth 08 June 2023, 05:16:25 UTC octeontx2-af: Fix promiscuous mode CN10KB silicon introduced a new exact match feature, which is used for DMAC filtering. The state of installed DMAC filters in this exact match table is getting corrupted when promiscuous mode is toggled. Fix this by not touching Exact match related config when promiscuous mode is toggled. Fixes: 2dba9459d2c9 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 June 2023, 09:47:59 UTC
0ad4982 Yoshihiro Shimoda 08 June 2023, 01:57:27 UTC net: renesas: rswitch: Fix timestamp feature after all descriptors are used The timestamp descriptors were intended to act cyclically. Descriptors from index 0 through gq->ring_size - 1 contain actual information, and the last index (gq->ring_size) should have LINKFIX to indicate the first index 0 descriptor. However, the LINKFIX value is missing, causing the timestamp feature to stop after all descriptors are used. To resolve this issue, set the LINKFIX to the timestamp descritors. Reported-by: Phong Hoang <phong.hoang.wz@renesas.com> Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 June 2023, 09:41:09 UTC
6c02568 Max Tottenham 07 June 2023, 16:23:54 UTC net/sched: act_pedit: Parse L3 Header for L4 offset Instead of relying on skb->transport_header being set correctly, opt instead to parse the L3 header length out of the L3 headers for both IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a bug if GRO is disabled, when GRO is disabled skb->transport_header is set by __netif_receive_skb_core() to point to the L3 header, it's later fixed by the upper protocol layers, but act_pedit will receive the SKB before the fixups are completed. The existing behavior causes the following to edit the L3 header if GRO is disabled instead of the UDP header: tc filter add dev eth0 ingress protocol ip flower ip_proto udp \ dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053 Also re-introduce a rate-limited warning if we were unable to extract the header offset when using the 'ex' interface. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Max Tottenham <mtottenh@akamai.com> Reviewed-by: Josh Hunt <johunt@akamai.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/ Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 June 2023, 09:34:27 UTC
8631991 Wes Huang 08 June 2023, 03:01:42 UTC net: usb: qmi_wwan: add support for Compal RXM-G1 Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Wes Huang <wes.huang@moxa.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 June 2023, 02:39:31 UTC
6292d74 Yuezhen Luan 07 June 2023, 16:41:16 UTC igb: Fix extts capture value format for 82580/i354/i350 82580/i354/i350 features circle-counter-like timestamp registers that are different with newer i210. The EXTTS capture value in AUXTSMPx should be converted from raw circle counter value to timestamp value in resolution of 1 nanosec by the driver. This issue can be reproduced on i350 nics, connecting an 1PPS signal to a SDP pin, and run 'ts2phc' command to read external 1PPS timestamp value. On i210 this works fine, but on i350 the extts is not correctly converted. The i350/i354/82580's SYSTIM and other timestamp registers are 40bit counters, presenting time range of 2^40 ns, that means these registers overflows every about 1099s. This causes all these regs can't be used directly in contrast to the newer i210/i211s. The igb driver needs to convert these raw register values to valid time stamp format by using kernel timecounter apis for i350s families. Here the igb_extts() just forgot to do the convert. Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Signed-off-by: Yuezhen Luan <eggcar.luan@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230607164116.3768175-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 June 2023, 02:11:12 UTC
91ffd1b Guillaume Nault 07 June 2023, 16:05:02 UTC ping6: Fix send to link-local addresses with VRF. Ping sockets can't send packets when they're bound to a VRF master device and the output interface is set to a slave device. For example, when net.ipv4.ping_group_range is properly set, so that ping6 can use ping sockets, the following kind of commands fails: $ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1 What happens is that sk->sk_bound_dev_if is set to the VRF master device, but 'oif' is set to the real output device. Since both are set but different, ping_v6_sendmsg() sees their value as inconsistent and fails. Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if. This fixes the following kselftest failure: $ ./fcnal-test.sh -t ipv6_ping [...] TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL] Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/ Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Fixes: 5e457896986e ("net: ipv6: Fix ping to link-local addresses.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 June 2023, 01:59:57 UTC
2122587 Wei Fang 07 June 2023, 09:10:48 UTC net: enetc: correct the indexes of highest and 2nd highest TCs For ENETC hardware, the TCs are numbered from 0 to N-1, where N is the number of TCs. Numerically higher TC has higher priority. It's obvious that the highest priority TC index should be N-1 and the 2nd highest priority TC index should be N-2. However, the previous logic uses netdev_get_prio_tc_map() to get the indexes of highest priority and 2nd highest priority TCs, it does not make sense and is incorrect to give a "tc" argument to netdev_get_prio_tc_map(). So the driver may get the wrong indexes of the two highest priotiry TCs which would lead to failed to set the CBS for the two highest priotiry TCs. e.g. $ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \ map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1 $ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \ sendslope -900000 hicredit 12 locredit -113 offload 1 $ Error: Specified device failed to setup cbs hardware offload. ^^^^^ In this example, the previous logic deems the indexes of the two highest priotiry TCs should be 3 and 2. Actually, the indexes are 5 and 4, because the number of TCs is 6. So it would be failed to configure the CBS for the two highest priority TCs. Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2023, 19:57:54 UTC
1240eb9 Pablo Neira Ayuso 08 June 2023, 00:32:02 UTC netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE In case of error when adding a new rule that refers to an anonymous set, deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE. Thus, the lookup expression marks anonymous sets as inactive in the next generation to ensure it is not reachable in this transaction anymore and decrement the set refcount as introduced by c1592a89942e ("netfilter: nf_tables: deactivate anonymous set from preparation phase"). The abort step takes care of undoing the anonymous set. This is also consistent with rule deletion, where NFT_TRANS_PREPARE is used. Note that this error path is exercised in the preparation step of the commit protocol. This patch replaces nf_tables_rule_release() by the deactivate and destroy calls, this time with NFT_TRANS_PREPARE. Due to this incorrect error handling, it is possible to access a dangling pointer to the anonymous set that remains in the transaction list. [1009.379054] BUG: KASAN: use-after-free in nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379106] Read of size 8 at addr ffff88816c4c8020 by task nft-rule-add/137110 [1009.379116] CPU: 7 PID: 137110 Comm: nft-rule-add Not tainted 6.4.0-rc4+ #256 [1009.379128] Call Trace: [1009.379132] <TASK> [1009.379135] dump_stack_lvl+0x33/0x50 [1009.379146] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379191] print_address_description.constprop.0+0x27/0x300 [1009.379201] kasan_report+0x107/0x120 [1009.379210] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379255] nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379302] nft_lookup_init+0xa5/0x270 [nf_tables] [1009.379350] nf_tables_newrule+0x698/0xe50 [nf_tables] [1009.379397] ? nf_tables_rule_release+0xe0/0xe0 [nf_tables] [1009.379441] ? kasan_unpoison+0x23/0x50 [1009.379450] nfnetlink_rcv_batch+0x97c/0xd90 [nfnetlink] [1009.379470] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink] [1009.379485] ? __alloc_skb+0xb8/0x1e0 [1009.379493] ? __alloc_skb+0xb8/0x1e0 [1009.379502] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [1009.379509] ? unwind_get_return_address+0x2a/0x40 [1009.379517] ? write_profile+0xc0/0xc0 [1009.379524] ? avc_lookup+0x8f/0xc0 [1009.379532] ? __rcu_read_unlock+0x43/0x60 Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 08 June 2023, 19:49:26 UTC
78c50d6 Kamil Maziarz 06 June 2023, 10:33:58 UTC ice: Fix XDP memory leak when NIC is brought up and down Fix the buffer leak that occurs while switching the port up and down with traffic and XDP by checking for an active XDP program and freeing all empty TX buffers. Fixes: efc2214b6047 ("ice: Add support for XDP") Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 08 June 2023, 18:41:40 UTC
25041a4 Linus Torvalds 08 June 2023, 16:27:19 UTC Merge tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, wifi, netfilter, bluetooth and ebpf. Current release - regressions: - bpf: sockmap: avoid potential NULL dereference in sk_psock_verdict_data_ready() - wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif() - phylink: actually fix ksettings_set() ethtool call - eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3 Current release - new code bugs: - wifi: mt76: fix possible NULL pointer dereference in mt7996_mac_write_txwi() Previous releases - regressions: - netfilter: fix NULL pointer dereference in nf_confirm_cthelper - wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS - openvswitch: fix upcall counter access before allocation - bluetooth: - fix use-after-free in hci_remove_ltk/hci_remove_irk - fix l2cap_disconnect_req deadlock - nic: bnxt_en: prevent kernel panic when receiving unexpected PHC_UPDATE event Previous releases - always broken: - core: annotate rfs lockless accesses - sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values - netfilter: add null check for nla_nest_start_noflag() in nft_dump_basechain_hook() - bpf: fix UAF in task local storage - ipv4: ping_group_range: allow GID from 2147483648 to 4294967294 - ipv6: rpl: fix route of death. - tcp: gso: really support BIG TCP - mptcp: fixes for user-space PM address advertisement - smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT - can: avoid possible use-after-free when j1939_can_rx_register fails - batman-adv: fix UaF while rescheduling delayed work - eth: qede: fix scheduling while atomic - eth: ice: make writes to /dev/gnssX synchronous" * tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event bnxt_en: Skip firmware fatal error recovery if chip is not accessible bnxt_en: Query default VLAN before VNIC setup on a VF bnxt_en: Don't issue AP reset during ethtool's reset operation bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() net: bcmgenet: Fix EEE implementation eth: ixgbe: fix the wake condition eth: bnxt: fix the wake condition lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() bpf: Add extra path pointer check to d_path helper net: sched: fix possible refcount leak in tc_chain_tmplt_add() net: sched: act_police: fix sparse errors in tcf_police_dump() net: openvswitch: fix upcall counter access before allocation net: sched: move rtm_tca_policy declaration to include file ice: make writes to /dev/gnssX synchronous net: sched: add rcu annotations around qdisc->qdisc_sleeping rfs: annotate lockless accesses to RFS sock flow table rfs: annotate lockless accesses to sk->sk_rxhash virtio_net: use control_buf for coalesce params ... 08 June 2023, 16:27:19 UTC
79b6fad Linus Torvalds 08 June 2023, 15:46:58 UTC Merge tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Dave Chinner: "These are a set of regression fixes discovered on recent kernels. I was hoping to send this to you a week and half ago, but events out of my control delayed finalising the changes until early this week. Whilst the diffstat looks large for this stage of the merge window, a large chunk of it comes from moving the guts of one function from one file to another i.e. it's the same code, it is just run in a different context where it is safe to hold a specific lock. Otherwise the individual changes are relatively small and straigtht forward. Summary: - Propagate unlinked inode list corruption back up to log recovery (regression fix) - improve corruption detection for AGFL entries, AGFL indexes and XEFI extents (syzkaller fuzzer oops report) - Avoid double perag reference release (regression fix) - Improve extent merging detection in scrub (regression fix) - Fix a new undefined high bit shift (regression fix) - Fix for AGF vs inode cluster buffer deadlock (regression fix)" * tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: collect errors from inodegc for unlinked inode recovery xfs: validate block number being freed before adding to xefi xfs: validity check agbnos on the AGFL xfs: fix agf/agfl verification on v4 filesystems xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag() xfs: fix broken logic when detecting mergeable bmap records xfs: Fix undefined behavior of shift into sign bit xfs: fix AGF vs inode cluster buffer deadlock xfs: defered work could create precommits xfs: restore allocation trylock iteration xfs: buffer pins need to hold a buffer reference 08 June 2023, 15:46:58 UTC
05a1308 Simon Horman 25 May 2023, 10:52:58 UTC ice: Don't dereference NULL in ice_gnss_read error path If pf is NULL in ice_gnss_read() then it will be dereferenced in the error path by a call to dev_dbg(ice_pf_to_dev(pf), ...). Avoid this by simply returning in this case. If logging is desired an alternate approach might be to use pr_err() before returning. Flagged by Smatch as: .../ice_gnss.c:196 ice_gnss_read() error: we previously assumed 'pf' could be null (see line 131) Fixes: 43113ff73453 ("ice: add TTY for GNSS module for E810T device") Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 08 June 2023, 15:38:56 UTC
6c0ec7a Paolo Abeni 08 June 2023, 08:52:48 UTC Merge branch 'bnxt_en-bug-fixes' Michael Chan says: ==================== bnxt_en: Bug fixes This patchset has the following fixes for bnxt_en: 1. Add missing VNIC ID parameter in the FW message when getting an updated RSS configuration from the FW. 2. Fix a warning when doing ethtool reset on newer chips. 3. Fix VLAN issue on a VF when a default VLAN is assigned. 4. Fix a problem during DPC (Downstream Port containment) scenario. 5. Fix a NULL pointer dereference when receiving a PTP event from FW. 6. Fix VXLAN/Geneve UDP port delete/add with newer FW. ==================== Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:48 UTC
1eb4ef1 Somnath Kotur 07 June 2023, 07:54:09 UTC bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
319a782 Pavan Chebbi 07 June 2023, 07:54:08 UTC bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event The firmware can send PHC_RTC_UPDATE async event on a PF that may not have PTP registered. In such a case, there will be a null pointer deference for bp->ptp_cfg when we try to handle the event. Fix it by not registering for this event with the firmware if !bp->ptp_cfg. Also, check that bp->ptp_cfg is valid before proceeding when we receive the event. Fixes: 8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
83474a9 Vikas Gupta 07 June 2023, 07:54:07 UTC bnxt_en: Skip firmware fatal error recovery if chip is not accessible Driver starts firmware fatal error recovery by detecting heartbeat failure or fw reset count register changing. But these checks are not reliable if the device is not accessible. This can happen while DPC (Downstream Port containment) is in progress. Skip firmware fatal recovery if pci_device_is_present() returns false. Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
1a9e4f5 Somnath Kotur 07 June 2023, 07:54:06 UTC bnxt_en: Query default VLAN before VNIC setup on a VF We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
1d99780 Sreekanth Reddy 07 June 2023, 07:54:05 UTC bnxt_en: Don't issue AP reset during ethtool's reset operation Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
095d5dc Pavan Chebbi 07 June 2023, 07:54:04 UTC bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() We must specify the vnic id of the vnic in the input structure of this firmware message. Otherwise we will get an error from the firmware. Fixes: 98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
182620a Jakub Kicinski 08 June 2023, 04:56:01 UTC Merge tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - fix a broken sync while rescheduling delayed work, by Vladislav Efanov * tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge: batman-adv: Broken sync while rescheduling delayed work ==================== Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:56:01 UTC
a9f3104 Florian Fainelli 06 June 2023, 21:43:47 UTC net: bcmgenet: Fix EEE implementation We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:53:14 UTC
f0d7519 Jakub Kicinski 07 June 2023, 01:08:26 UTC eth: ixgbe: fix the wake condition Flip the netif_carrier_ok() condition in queue wake logic. When I moved it to inside __netif_txq_completed_wake() I missed negating it. This made the condition ineffective and could probably lead to crashes. Fixes: 301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues") Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:53:11 UTC
649c3fe Jakub Kicinski 07 June 2023, 01:08:25 UTC eth: bnxt: fix the wake condition The down condition should be the negation of the wake condition, IOW when I moved it from: if (cond && wake()) to if (__netif_txq_completed_wake(cond)) Cond should have been negated. Flip it now. This bug leads to occasional crashes with netconsole. It may also lead to queue never waking up in case BQL is not enabled. Reported-by: David Wei <davidhwei@meta.com> Fixes: 08a096780d92 ("bnxt: use new queue try_stop/try_wake macros") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:53:11 UTC
c9d99cf Jakub Kicinski 08 June 2023, 04:47:11 UTC Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-06-07 We've added 7 non-merge commits during the last 7 day(s) which contain a total of 12 files changed, 112 insertions(+), 7 deletions(-). The main changes are: 1) Fix a use-after-free in BPF's task local storage, from KP Singh. 2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa. 3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet. 4) UAPI fix for BPF_NETFILTER before final kernel ships, from Florian Westphal. 5) Fix map-in-map array_map_gen_lookup code generation where elem_size was not being set for inner maps, from Rhys Rustad-Elliott. 6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add extra path pointer check to d_path helper selftests/bpf: Fix sockopt_sk selftest bpf: netfilter: Add BPF_NETFILTER bpf_attach_type selftests/bpf: Add access_inner_map selftest bpf: Fix elem_size not being set for inner maps bpf: Fix UAF in task local storage bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready() ==================== Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:47:11 UTC
7c5d480 Ben Hutchings 02 June 2023, 18:28:15 UTC lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap. So we need to clear the pointer to our glue structure in rmap before doing that, not after. Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:25:00 UTC
a1a64a1 Pablo Neira Ayuso 07 June 2023, 22:19:12 UTC netfilter: nfnetlink: skip error delivery on batch in case of ENOMEM If caller reports ENOMEM, then stop iterating over the batch and send a single netlink message to userspace to report OOM. Fixes: cbb8125eb40b ("netfilter: nfnetlink: deliver netlink errors on batch completion") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 08 June 2023, 02:00:02 UTC
212ed75 Pablo Neira Ayuso 07 June 2023, 09:55:42 UTC netfilter: nf_tables: integrate pipapo into commit protocol The pipapo set backend follows copy-on-update approach, maintaining one clone of the existing datastructure that is being updated. The clone and current datastructures are swapped via rcu from the commit step. The existing integration with the commit protocol is flawed because there is no operation to clean up the clone if the transaction is aborted. Moreover, the datastructure swap happens on set element activation. This patch adds two new operations for sets: commit and abort, these new operations are invoked from the commit and abort steps, after the transactions have been digested, and it updates the pipapo set backend to use it. This patch adds a new ->pending_update field to sets to maintain a list of sets that require this new commit and abort operations. Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 08 June 2023, 01:56:20 UTC
5f63595 Linus Torvalds 07 June 2023, 20:49:42 UTC Merge tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for unbalanced open count for inhibited input devices - fixups in Elantech PS/2 and Cyppress TTSP v5 drivers - a quirk to soc_button_array driver to make it work with Lenovo Yoga Book X90F / X90L - a removal of erroneous entry from xpad driver * tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - delete a Razer DeathAdder mouse VID/PID entry Input: psmouse - fix OOB access in Elantech protocol Input: soc_button_array - add invalid acpi_index DMI quirk handling Input: fix open count when closing inhibited device Input: cyttsp5 - fix array length 07 June 2023, 20:49:42 UTC
25bda38 Thomas Gleixner 06 June 2023, 23:14:05 UTC MAINTAINERS: Add entry for debug objects This is overdue and an oversight. Add myself to this file deespite the fact that I'm trying to reduce the number of entries in this file which have my name attached, but in the hope that patches wont get picked up elsewhere completely unreviewed and unnoticed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2023, 19:21:30 UTC
a27648c David Howells 07 June 2023, 08:47:13 UTC afs: Fix setting of mtime when creating a file/dir/symlink kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when creating a file, dir or symlink because the mtime recorded in the afs_operation struct gets passed to the server by the marshalling routines, but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it. This gets masked if a file or directory is subsequently modified. Fix this by filling in op->mtime before calling the create op. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2023, 16:03:12 UTC
f46fab0 Jiri Olsa 06 June 2023, 18:17:14 UTC bpf: Add extra path pointer check to d_path helper Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9da793 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org 07 June 2023, 13:03:43 UTC
44f8baa Hangyu Hua 07 June 2023, 02:23:01 UTC net: sched: fix possible refcount leak in tc_chain_tmplt_add() try_module_get will be called in tcf_proto_lookup_ops. So module_put needs to be called to drop the refcount if ops don't implement the required function. Fixes: 9f407f1768d3 ("net: sched: introduce chain templates") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:31:41 UTC
682881e Eric Dumazet 06 June 2023, 13:13:04 UTC net: sched: act_police: fix sparse errors in tcf_police_dump() Fixes following sparse errors: net/sched/act_police.c:360:28: warning: dereference of noderef expression net/sched/act_police.c:362:45: warning: dereference of noderef expression net/sched/act_police.c:362:45: warning: dereference of noderef expression net/sched/act_police.c:368:28: warning: dereference of noderef expression net/sched/act_police.c:370:45: warning: dereference of noderef expression net/sched/act_police.c:370:45: warning: dereference of noderef expression net/sched/act_police.c:376:45: warning: dereference of noderef expression net/sched/act_police.c:376:45: warning: dereference of noderef expression Fixes: d1967e495a8d ("net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrate") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:28:04 UTC
de9df6c Eelco Chaudron 06 June 2023, 11:56:35 UTC net: openvswitch: fix upcall counter access before allocation Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d91fefd ("net: openvswitch: release vport resources on failure") Fixes: 1933ea365aa7 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:25:05 UTC
886bc7d Eric Dumazet 06 June 2023, 11:42:33 UTC net: sched: move rtm_tca_policy declaration to include file rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c, thus should be declared in an include file. This fixes the following sparse warning: net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static? Fixes: e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:19:28 UTC
bf15bb3 Michal Schmidt 06 June 2023, 17:12:53 UTC ice: make writes to /dev/gnssX synchronous The current ice driver's GNSS write implementation buffers writes and works through them asynchronously in a kthread. That's bad because: - The GNSS write_raw operation is supposed to be synchronous[1][2]. - There is no upper bound on the number of pending writes. Userspace can submit writes much faster than the driver can process, consuming unlimited amounts of kernel memory. A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS buffers instead of first one") would add one more problem: - The possibility of waiting for a very long time to flush the write work when doing rmmod, softlockups. To fix these issues, simplify the implementation: Drop the buffering, the write_work, and make the writes synchronous. I tested this with gpsd and ubxtool. [1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf "User interface" slide. [2] A comment in drivers/gnss/core.c:gnss_write(): /* Ignoring O_NONBLOCK, write_raw() is synchronous. */ [3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20230217120541.16745-1-karol.kolacinski@intel.com/ Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:51:58 UTC
d636fc5 Eric Dumazet 06 June 2023, 11:19:29 UTC net: sched: add rcu annotations around qdisc->qdisc_sleeping syzbot reported a race around qdisc->qdisc_sleeping [1] It is time we add proper annotations to reads and writes to/from qdisc->qdisc_sleeping. [1] BUG: KCSAN: data-race in dev_graft_qdisc / qdisc_lookup_rcu read to 0xffff8881286fc618 of 8 bytes by task 6928 on cpu 1: qdisc_lookup_rcu+0x192/0x2c0 net/sched/sch_api.c:331 __tcf_qdisc_find+0x74/0x3c0 net/sched/cls_api.c:1174 tc_get_tfilter+0x18f/0x990 net/sched/cls_api.c:2547 rtnetlink_rcv_msg+0x7af/0x8c0 net/core/rtnetlink.c:6386 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1e3/0x270 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881286fc618 of 8 bytes by task 6912 on cpu 0: dev_graft_qdisc+0x4f/0x80 net/sched/sch_generic.c:1115 qdisc_graft+0x7d0/0xb60 net/sched/sch_api.c:1103 tc_modify_qdisc+0x712/0xf10 net/sched/sch_api.c:1693 rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1e3/0x270 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 6912 Comm: syz-executor.5 Not tainted 6.4.0-rc3-syzkaller-00190-g0d85b27b0cc6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023 Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@nvidia.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:25:39 UTC
e3144ff David S. Miller 07 June 2023, 09:09:05 UTC Merge branch 'rfs-lockless-annotate' Eric Dumazet says: ==================== rfs: annotate lockless accesses rfs runs without locks held, so we should annotate read and writes to shared variables. It should prevent compilers forcing writes in the following situation: if (var != val) var = val; A compiler could indeed simply avoid the conditional: var = val; This matters if var is shared between many cpus. v2: aligns one closing bracket (Simon) adds Fixes: tags (Jakub) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:09:05 UTC
5c3b74a Eric Dumazet 06 June 2023, 07:41:15 UTC rfs: annotate lockless accesses to RFS sock flow table Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table. This also prevents a (smart ?) compiler to remove the condition in: if (table->ents[index] != newval) table->ents[index] = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:08:45 UTC
1e5c647 Eric Dumazet 06 June 2023, 07:41:14 UTC rfs: annotate lockless accesses to sk->sk_rxhash Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash. This also prevents a (smart ?) compiler to remove the condition in: if (sk->sk_rxhash != newval) sk->sk_rxhash = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:08:45 UTC
ab39b11 Jakub Kicinski 07 June 2023, 04:36:57 UTC Merge tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fixes to debugfs registration - Fix use-after-free in hci_remove_ltk/hci_remove_irk - Fixes to ISO channel support - Fix missing checks for invalid L2CAP DCID - Fix l2cap_disconnect_req deadlock - Add lock to protect HCI_UNREGISTER * tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Add missing checks for invalid DCID Bluetooth: ISO: use correct CIS order in Set CIG Parameters event Bluetooth: ISO: don't try to remove CIG if there are bound CIS left Bluetooth: Fix l2cap_disconnect_req deadlock Bluetooth: hci_qca: fix debugfs registration Bluetooth: fix debugfs registration Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG Bluetooth: ISO: consider right CIS when removing CIG at cleanup ==================== Link: https://lore.kernel.org/r/20230606003454.2392552-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 June 2023, 04:36:57 UTC
20c4764 Jakub Kicinski 07 June 2023, 04:23:49 UTC Merge tag 'nf-23-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing nul-check in basechain hook netlink dump path, from Gavrilov Ilia. 2) Fix bitwise register tracking, from Jeremy Sowden. 3) Null pointer dereference when accessing conntrack helper, from Tijs Van Buggenhout. 4) Add schedule point to ipset's call_ad, from Kuniyuki Iwashima. 5) Incorrect boundary check when building chain blob. * tag 'nf-23-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: out-of-bound check in chain blob netfilter: ipset: Add schedule point in call_ad(). netfilter: conntrack: fix NULL pointer dereference in nf_confirm_cthelper netfilter: nft_bitwise: fix register tracking netfilter: nf_tables: Add null check for nla_nest_start_noflag() in nft_dump_basechain_hook() ==================== Link: https://lore.kernel.org/r/20230606225851.67394-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 June 2023, 04:23:49 UTC
back to top