Skip to main content

Browse the archive

https://github.com/torvalds/linux
29 July 2024, 15:18:00 UTC
sort by:
Revision Author Date Message Commit Date
61132bf Marcelo Leitner 30 January 2015, 11:56:01 UTC qlge: Fix qlge_update_hw_vlan_features to handle if interface is down Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil <harish.patil@qlogic.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 01:51:14 UTC
bdbbb85 Eric Dumazet 30 January 2015, 05:35:05 UTC ipv4: tcp: get rid of ugly unicast_sock In commit be9f4a44e7d41 ("ipv4: tcp: remove per net tcp_sock") I tried to address contention on a socket lock, but the solution I chose was horrible : commit 3a7c384ffd57e ("ipv4: tcp: unicast_sock should not land outside of TCP stack") addressed a selinux regression. commit 0980e56e506b ("ipv4: tcp: set unicast_sock uc_ttl to -1") took care of another regression. commit b5ec8eeac46 ("ipv4: fix ip_send_skb()") fixed another regression. commit 811230cd85 ("tcp: ipv4: initialize unicast_sock sk_pacing_rate") was another shot in the dark. Really, just use a proper socket per cpu, and remove the skb_orphan() call, to re-enable flow control. This solves a serious problem with FQ packet scheduler when used in hostile environments, as we do not want to allocate a flow structure for every RST packet sent in response to a spoofed packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 February 2015, 07:06:19 UTC
0d32ef8 Eric Dumazet 30 January 2015, 01:30:12 UTC net: sched: fix panic in rate estimators Doing the following commands on a non idle network device panics the box instantly, because cpu_bstats gets overwritten by stats. tc qdisc add dev eth0 root <your_favorite_qdisc> ... some traffic (one packet is enough) ... tc qdisc replace dev eth0 root est 1sec 4sec <your_favorite_qdisc> [ 325.355596] BUG: unable to handle kernel paging request at ffff8841dc5a074c [ 325.362609] IP: [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90 [ 325.369158] PGD 1fa7067 PUD 0 [ 325.372254] Oops: 0000 [#1] SMP [ 325.375514] Modules linked in: ... [ 325.398346] CPU: 13 PID: 14313 Comm: tc Not tainted 3.19.0-smp-DEV #1163 [ 325.412042] task: ffff8800793ab5d0 ti: ffff881ff2fa4000 task.ti: ffff881ff2fa4000 [ 325.419518] RIP: 0010:[<ffffffff81541c9e>] [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90 [ 325.428506] RSP: 0018:ffff881ff2fa7928 EFLAGS: 00010286 [ 325.433824] RAX: 000000000000000c RBX: ffff881ff2fa796c RCX: 000000000000000c [ 325.440988] RDX: ffff8841dc5a0744 RSI: 0000000000000060 RDI: 0000000000000060 [ 325.448120] RBP: ffff881ff2fa7948 R08: ffffffff81cd4f80 R09: 0000000000000000 [ 325.455268] R10: ffff883ff223e400 R11: 0000000000000000 R12: 000000015cba0744 [ 325.462405] R13: ffffffff81cd4f80 R14: ffff883ff223e460 R15: ffff883feea0722c [ 325.469536] FS: 00007f2ee30fa700(0000) GS:ffff88407fa20000(0000) knlGS:0000000000000000 [ 325.477630] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 325.483380] CR2: ffff8841dc5a074c CR3: 0000003feeae9000 CR4: 00000000001407e0 [ 325.490510] Stack: [ 325.492524] ffff883feea0722c ffff883fef719dc0 ffff883feea0722c ffff883ff223e4a0 [ 325.499990] ffff881ff2fa79a8 ffffffff815424ee ffff883ff223e49c 000000015cba0744 [ 325.507460] 00000000f2fa7978 0000000000000000 ffff881ff2fa79a8 ffff883ff223e4a0 [ 325.514956] Call Trace: [ 325.517412] [<ffffffff815424ee>] gen_new_estimator+0x8e/0x230 [ 325.523250] [<ffffffff815427aa>] gen_replace_estimator+0x4a/0x60 [ 325.529349] [<ffffffff815718ab>] tc_modify_qdisc+0x52b/0x590 [ 325.535117] [<ffffffff8155edd0>] rtnetlink_rcv_msg+0xa0/0x240 [ 325.540963] [<ffffffff8155ed30>] ? __rtnl_unlock+0x20/0x20 [ 325.546532] [<ffffffff8157f811>] netlink_rcv_skb+0xb1/0xc0 [ 325.552145] [<ffffffff8155b355>] rtnetlink_rcv+0x25/0x40 [ 325.557558] [<ffffffff8157f0d8>] netlink_unicast+0x168/0x220 [ 325.563317] [<ffffffff8157f47c>] netlink_sendmsg+0x2ec/0x3e0 Lets play safe and not use an union : percpu 'pointers' are mostly read anyway, and we have typically few qdiscs per host. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Fixes: 22e0f8b9322c ("net: sched: make bstats per cpu and estimator RCU safe") Signed-off-by: David S. Miller <davem@davemloft.net> 01 February 2015, 01:49:37 UTC
d953ca4 Haiyang Zhang 29 January 2015, 20:34:49 UTC hyperv: Fix the error processing in netvsc_send() The existing code frees the skb in EAGAIN case, in which the skb will be retried from upper layer and used again. Also, the existing code doesn't free send buffer slot in error case, because there is no completion message for unsent packets. This patch fixes these problems. (Please also include this patch for stable trees. Thanks!) Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 February 2015, 01:31:49 UTC
ecf6ba8 Iyappan Subramanian 29 January 2015, 22:38:23 UTC drivers: net: xgene: fix: Out of order descriptor bytes read This patch fixes the following kernel crash, WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c() Call trace: [<fffffe0000096b7c>] dump_backtrace+0x0/0x184 [<fffffe0000096d10>] show_stack+0x10/0x1c [<fffffe0000685ea0>] dump_stack+0x74/0x98 [<fffffe00000b44e0>] warn_slowpath_common+0x88/0xb0 [<fffffe00000b461c>] warn_slowpath_null+0x14/0x20 [<fffffe00005b5c1c>] tcp_clean_rtx_queue+0x654/0x80c [<fffffe00005b6228>] tcp_ack+0x454/0x688 [<fffffe00005b6ca8>] tcp_rcv_established+0x4a4/0x62c [<fffffe00005bf4b4>] tcp_v4_do_rcv+0x16c/0x350 [<fffffe00005c225c>] tcp_v4_rcv+0x8e8/0x904 [<fffffe000059d470>] ip_local_deliver_finish+0x100/0x26c [<fffffe000059dad8>] ip_local_deliver+0xac/0xc4 [<fffffe000059d6c4>] ip_rcv_finish+0xe8/0x328 [<fffffe000059dd3c>] ip_rcv+0x24c/0x38c [<fffffe0000563950>] __netif_receive_skb_core+0x29c/0x7c8 [<fffffe0000563ea4>] __netif_receive_skb+0x28/0x7c [<fffffe0000563f54>] netif_receive_skb_internal+0x5c/0xe0 [<fffffe0000564810>] napi_gro_receive+0xb4/0x110 [<fffffe0000482a2c>] xgene_enet_process_ring+0x144/0x338 [<fffffe0000482d18>] xgene_enet_napi+0x1c/0x50 [<fffffe0000565454>] net_rx_action+0x154/0x228 [<fffffe00000b804c>] __do_softirq+0x110/0x28c [<fffffe00000b8424>] irq_exit+0x8c/0xc0 [<fffffe0000093898>] handle_IRQ+0x44/0xa8 [<fffffe000009032c>] gic_handle_irq+0x38/0x7c [...] Software writes poison data into the descriptor bytes[15:8] and upon receiving the interrupt, if those bytes are overwritten by the hardware with the valid data, software also reads bytes[7:0] and executes receive/tx completion logic. If the CPU executes the above two reads in out of order fashion, then the bytes[7:0] will have older data and causing the kernel panic. We have to force the order of the reads and thus this patch introduces read memory barrier between these reads. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 02:17:31 UTC
08178e5 David S. Miller 31 January 2015, 02:03:58 UTC Merge branch 'vlan_get_protocol' Toshiaki Makita says: ==================== Fix checksum error when using stacked vlan When I was testing 802.1ad, I found several drivers don't take into account 802.1ad or multiple vlans when retrieving L3 (IP/IPv6) or L4 (TCP/UDP) protocol for checksum offload. It is mainly due to vlan_get_protocol(), which extracts ether type only when it is tagged with single 802.1Q. When 802.1ad is used or there are multiple vlans, it extracts vlan protocol and drivers cannot determine which L3/L4 protocol is used. Those drivers, most of which have IP_CSUM/IPV6_CSUM features, get L3/L4 header-offset by software, so it seems that their checksum offload works with multiple vlans if we can parse protocols correctly. (They know mac header length, and probably don't care about what is in it.) And another thing, some of Intel's drivers seem to use skb->protocol where vlan_get_protocol() is more suitable. I tested that at least igb/igbvf on I350 works with this patch set. Note: We can hand a double tagged packet with CHECKSUM_PARTIAL to a HW driver by creating a vlan device on a bridge device and enabling vlan_filtering of the bridge with 802.1ad protocol. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 02:03:58 UTC
10e4fb3 Toshiaki Makita 29 January 2015, 11:37:10 UTC ixgbevf: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbevf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use first->protocol instead of skb->protocol to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 02:03:47 UTC
0213668 Toshiaki Makita 29 January 2015, 11:37:09 UTC ixgbe: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbe_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 02:03:47 UTC
72b1405 Toshiaki Makita 29 January 2015, 11:37:08 UTC igbvf: Fix checksum error when using stacked vlan When a skb has multiple vlans and it is CHECKSUM_PARTIAL, igbvf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 02:03:47 UTC
d4bcef3 Toshiaki Makita 29 January 2015, 11:37:07 UTC net: Fix vlan_get_protocol for stacked vlan vlan_get_protocol() could not get network protocol if a skb has a 802.1ad vlan tag or multiple vlans, which caused incorrect checksum calculation in several drivers. Fix vlan_get_protocol() to retrieve network protocol instead of incorrect vlan protocol. As the logic is the same as skb_network_protocol(), create a common helper function __vlan_get_protocol() and call it from existing functions. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 02:03:47 UTC
cfbf654 Saran Maruti Ramanara 29 January 2015, 10:05:58 UTC net: sctp: fix passing wrong parameter header to param_type2af in sctp_process_param When making use of RFC5061, section 4.2.4. for setting the primary IP address, we're passing a wrong parameter header to param_type2af(), resulting always in NULL being returned. At this point, param.p points to a sctp_addip_param struct, containing a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation id. Followed by that, as also presented in RFC5061 section 4.2.4., comes the actual sctp_addr_param, which also contains a sctp_paramhdr, but this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that param_type2af() can make use of. Since we already hold a pointer to addr_param from previous line, just reuse it for param_type2af(). Fixes: d6de3097592b ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by: Saran Maruti Ramanara <saran.neti@telus.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 01:45:23 UTC
8b7c36d Pablo Neira 29 January 2015, 09:51:53 UTC netlink: fix wrong subscription bitmask to group mapping in The subscription bitmask passed via struct sockaddr_nl is converted to the group number when calling the netlink_bind() and netlink_unbind() callbacks. The conversion is however incorrect since bitmask (1 << 0) needs to be mapped to group number 1. Note that you cannot specify the group number 0 (usually known as _NONE) from setsockopt() using NETLINK_ADD_MEMBERSHIP since this is rejected through -EINVAL. This problem became noticeable since 97840cb ("netfilter: nfnetlink: fix insufficient validation in nfnetlink_bind") when binding to bitmask (1 << 0) in ctnetlink. Reported-by: Andre Tomt <andre@tomt.net> Reported-by: Ivan Delalande <colona@arista.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> 31 January 2015, 01:43:47 UTC
3cdaa5b Li Wei 29 January 2015, 08:09:03 UTC ipv4: Don't increase PMTU with Datagram Too Big message. RFC 1191 said, "a host MUST not increase its estimate of the Path MTU in response to the contents of a Datagram Too Big message." Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 23:28:59 UTC
a1a0b55 David S. Miller 29 January 2015, 23:08:27 UTC Merge branch 'arm-build-fixes' Arnd Bergmann says: ==================== net: driver fixes from arm randconfig builds These four patches are fallout from test builds on ARM. I have a few more of them in my backlog but have not yet confirmed them to still be valid. The first three patches are about incomplete dependencies on old drivers. One could backport them to the beginning of time in theory, but there is little value since nobody would run into these problems. The final patch is one I had submitted before together with the respective pcmcia patch but forgot to follow up on that. It's still a valid but relatively theoretical bug, because the previous behavior of the driver was just as broken as what we have in mainline. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 23:08:27 UTC
96a3017 Arnd Bergmann 28 January 2015, 14:15:04 UTC net: am2150: fix nmclan_cs.c shared interrupt handling A recent patch tried to work around a valid warning for the use of a deprecated interface by blindly changing from the old pcmcia_request_exclusive_irq() interface to pcmcia_request_irq(). This driver has an interrupt handler that is not currently aware of shared interrupts, but can be easily converted to be. At the moment, the driver reads the interrupt status register repeatedly until it contains only zeroes in the interesting bits, and handles each bit individually. This patch adds the missing part of returning IRQ_NONE in case none of the bits are set to start with, so we can move on to the next interrupt source. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5f5316fcd08ef7 ("am2150: Update nmclan_cs.c to use update PCMCIA API") Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 23:08:21 UTC
e9b106b Arnd Bergmann 28 January 2015, 14:15:03 UTC net: lance,ni64: don't build for ARM The ni65 and lance ethernet drivers manually program the ISA DMA controller that is only available on x86 PCs and a few compatible systems. Trying to build it on ARM results in this error: ni65.c: In function 'ni65_probe1': ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function) ((inb(DMA1_STAT_REG) >> 4) & 0x0f) ^ ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function) | (inb(DMA2_STAT_REG) & 0xf0); The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for alpha, mips, parisc, powerpc and x86, although it is not clear which subarchitectures actually have them at the correct location. This patch for now just disables it for ARM, to avoid randconfig build errors. We could also decide to limit it to the set of architectures on which it does compile, but that might look more deliberate than guessing based on where the drivers build. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 23:08:21 UTC
303c28d Arnd Bergmann 28 January 2015, 14:15:02 UTC net: wan: add missing virt_to_bus dependencies The cosa driver is rather outdated and does not get built on most platforms because it requires the ISA_DMA_API symbol. However there are some ARM platforms that have ISA_DMA_API but no virt_to_bus, and they get this build error when enabling the ltpc driver. drivers/net/wan/cosa.c: In function 'tx_interrupt': drivers/net/wan/cosa.c:1768:3: error: implicit declaration of function 'virt_to_bus' unsigned long addr = virt_to_bus(cosa->txbuf); ^ The same problem exists for the Hostess SV-11 and Sealevel Systems 4021 drivers. This adds another dependency in Kconfig to avoid that configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 23:08:21 UTC
fc9a570 Arnd Bergmann 28 January 2015, 14:15:01 UTC net: cs89x0: always build platform code if !HAS_IOPORT_MAP The cs89x0 driver can either be built as an ISA driver or a platform driver, the choice is controlled by the CS89x0_PLATFORM Kconfig symbol. Building the ISA driver on a system that does not have a way to map I/O ports fails with this error: drivers/built-in.o: In function `cs89x0_ioport_probe.constprop.1': :(.init.text+0x4794): undefined reference to `ioport_map' :(.init.text+0x4830): undefined reference to `ioport_unmap' This changes the Kconfig logic to take that option away and always force building the platform variant of this driver if CONFIG_HAS_IOPORT_MAP is not set. This is the only correct choice in this case, and it avoids the build error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 23:08:20 UTC
e2a4800 Florian Westphal 28 January 2015, 09:56:04 UTC ppp: deflate: never return len larger than output buffer When we've run out of space in the output buffer to store more data, we will call zlib_deflate with a NULL output buffer until we've consumed remaining input. When this happens, olen contains the size the output buffer would have consumed iff we'd have had enough room. This can later cause skb_over_panic when ppp_generic skb_put()s the returned length. Reported-by: Iain Douglas <centos@1n6.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 22:50:01 UTC
d445d63 David S. Miller 29 January 2015, 22:20:16 UTC Merge branch 'netns' Nicolas Dichtel says: ==================== netns: audit netdevice creation with IFLA_NET_NS_[PID|FD] When one of these attributes is set, the netdevice is created into the netns pointed by IFLA_NET_NS_[PID|FD] (see the call to rtnl_create_link() in rtnl_newlink()). Let's call this netns the dest_net. After this creation, if the newlink handler exists, it is called with a netns argument that points to the netns where the netlink message has been received (called src_net in the code) which is the link netns. Hence, with one of these attributes, it's possible to create a x-netns netdevice. Here is the result of my code review: - all ip tunnels (sit, ipip, ip6_tunnels, gre[tap][v6], ip_vti[6]) does not really allows to use this feature: the netdevice is created in the dest_net and the src_net is completely ignored in the newlink handler. - VLAN properly handles this x-netns creation. - bridge ignores src_net, which seems fine (NETIF_F_NETNS_LOCAL is set). - CAIF subsystem is not clear for me (I don't know how it works), but it seems to wrongly use src_net. Patch #1 tries to fix this, but it was done only by code review (and only compile-tested), so please carefully review it. I may miss something. - HSR subsystem uses src_net to parse IFLA_HSR_SLAVE[1|2], but the netdevice has the flag NETIF_F_NETNS_LOCAL, so the question is: does this netdevice really supports x-netns? If not, the newlink handler should use the dest_net instead of src_net, I can provide the patch. - ieee802154 uses also src_net and does not have NETIF_F_NETNS_LOCAL. Same question: does this netdevice really supports x-netns? - bonding ignores src_net and flag NETIF_F_NETNS_LOCAL is set, ie x-netns is not supported. Fine. - CAN does not support rtnl/newlink, ok. - ipvlan uses src_net and does not have NETIF_F_NETNS_LOCAL. After looking at the code, it seems that this drivers support x-netns. Am I right? - macvlan/macvtap uses src_net and seems to have x-netns support. - team ignores src_net and has the flag NETIF_F_NETNS_LOCAL, ie x-netns is not supported. Ok. - veth uses src_net and have x-netns support ;-) Ok. - VXLAN didn't properly handle this. The link netns (vxlan->net) is the src_net and not dest_net (see patch #2). Note that it was already possible to create a x-netns vxlan before the commit f01ec1c017de ("vxlan: add x-netns support") but the nedevice remains broken. To summarize: - CAIF patch must be carefully reviewed - for HSR, ieee802154, ipvlan: is x-netns supported? ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 22:20:16 UTC
33564bb Nicolas Dichtel 26 January 2015, 21:28:14 UTC vxlan: setup the right link netns in newlink hdlr Rename the netns to src_net to avoid confusion with the netns where the interface stands. The user may specify IFLA_NET_NS_[PID|FD] to create a x-netns netndevice: IFLA_NET_NS_[PID|FD] points to the netns where the netdevice stands and src_net to the link netns. Note that before commit f01ec1c017de ("vxlan: add x-netns support"), it was possible to create a x-netns vxlan netdevice, but the netdevice was not operational. Fixes: f01ec1c017de ("vxlan: add x-netns support") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 22:20:02 UTC
8997c27 Nicolas Dichtel 26 January 2015, 21:28:13 UTC caif: remove wrong dev_net_set() call src_net points to the netns where the netlink message has been received. This netns may be different from the netns where the interface is created (because the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns. It seems wrong to override the netns in the newlink() handler because if it was not already src_net, it means that the user explicitly asks to create the netdevice in another netns. CC: Sjur Brændeland <sjur.brandeland@stericsson.com> CC: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Fixes: c41254006377 ("caif-hsi: Add rtnl support") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 22:20:02 UTC
9ce3577 karl beldan 29 January 2015, 10:10:22 UTC lib/checksum.c: fix build for generic csum_tcpudp_nofold Fixed commit added from64to32 under _#ifndef do_csum_ but used it under _#ifndef csum_tcpudp_nofold_, breaking some builds (Fengguang's robot reported TILEGX's). Move from64to32 under the latter. Fixes: 150ae0e94634 ("lib/checksum.c: fix carry in csum_tcpudp_nofold") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 19:57:38 UTC
811230c Eric Dumazet 28 January 2015, 13:47:11 UTC tcp: ipv4: initialize unicast_sock sk_pacing_rate When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing") Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 07:24:47 UTC
150ae0e karl beldan 28 January 2015, 09:58:11 UTC lib/checksum.c: fix carry in csum_tcpudp_nofold The carry from the 64->32bits folding was dropped, e.g with: saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1, csum_tcpudp_nofold returned 0 instead of 1. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:32:33 UTC
59ccaaa Roopa Prabhu 29 January 2015, 00:23:11 UTC bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081 This patch avoids calling rtnl_notify if the device ndo_bridge_getlink handler does not return any bytes in the skb. Alternately, the skb->len check can be moved inside rtnl_notify. For the bridge vlan case described in 92081, there is also a fix needed in bridge driver to generate a proper notification. Will fix that in subsequent patch. v2: rebase patch on net tree Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:21:31 UTC
95224ac David S. Miller 29 January 2015, 06:19:09 UTC Merge branch 'tcp_stretch_acks' Neal Cardwell says: ==================== fix stretch ACK bugs in TCP CUBIC and Reno This patch series fixes the TCP CUBIC and Reno congestion control modules to properly handle stretch ACKs in their respective additive increase modes, and in the transitions from slow start to additive increase. This finishes the project started by commit 9f9843a751d0a2057 ("tcp: properly handle stretch acks in slow start"), which fixed behavior for TCP congestion control when handling stretch ACKs in slow start mode. Motivation: In the Jan 2015 netdev thread 'BW regression after "tcp: refine TSO autosizing"', Eyal Perry documented a regression that Eric Dumazet determined was caused by improper handling of TCP stretch ACKs. Background: LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that cover more than the RFC-specified maximum of 2 packets. These stretch ACKs can cause serious performance shortfalls in common congestion control algorithms, like Reno and CUBIC, which were designed and tuned years ago with receiver hosts that were not using LRO or GRO, and were instead ACKing every other packet. Testing: at Google we have been using this approach for handling stretch ACKs for CUBIC datacenter and Internet traffic for several years, with good results. v2: * fixed return type of tcp_slow_start() to be u32 instead of int ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:19:09 UTC
d6b1a8a Neal Cardwell 29 January 2015, 01:01:39 UTC tcp: fix timing issue in CUBIC slope calculation This patch fixes a bug in CUBIC that causes cwnd to increase slightly too slowly when multiple ACKs arrive in the same jiffy. If cwnd is supposed to increase at a rate of more than once per jiffy, then CUBIC was sometimes too slow. Because the bic_target is calculated for a future point in time, calculated with time in jiffies, the cwnd can increase over the course of the jiffy while the bic_target calculated as the proper CUBIC cwnd at time t=tcp_time_stamp+rtt does not increase, because tcp_time_stamp only increases on jiffy tick boundaries. So since the cnt is set to: ca->cnt = cwnd / (bic_target - cwnd); as cwnd increases but bic_target does not increase due to jiffy granularity, the cnt becomes too large, causing cwnd to increase too slowly. For example: - suppose at the beginning of a jiffy, cwnd=40, bic_target=44 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 40 / (44 - 40) = 40/4 = 10 - suppose we get 10 acks, each for 1 segment, so tcp_cong_avoid_ai() increases cwnd to 41 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 41 / (44 - 41) = 41 / 3 = 13 So now CUBIC will wait for 13 packets to be ACKed before increasing cwnd to 42, insted of 10 as it should. The fix is to avoid adjusting the slope (determined by ca->cnt) multiple times within a jiffy, and instead skip to compute the Reno cwnd, the "TCP friendliness" code path. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:18:38 UTC
9cd981d Neal Cardwell 29 January 2015, 01:01:38 UTC tcp: fix stretch ACK bugs in CUBIC Change CUBIC to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, because we are now precisely accounting for stretch ACKs, including delayed ACKs, we can now remove the delayed ACK tracking and estimation code that tracked recent delayed ACK behavior in ca->delayed_ack. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:18:38 UTC
c22bdca Neal Cardwell 29 January 2015, 01:01:37 UTC tcp: fix stretch ACK bugs in Reno Change Reno to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, if snd_cwnd crosses snd_ssthresh during slow start processing, and we then exit slow start mode, we need to carry over any remaining "credit" for packets ACKed and apply that to additive increase by passing this remaining "acked" count to tcp_cong_avoid_ai(). Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:18:38 UTC
814d488 Neal Cardwell 29 January 2015, 01:01:36 UTC tcp: fix the timid additive increase on stretch ACKs tcp_cong_avoid_ai() was too timid (snd_cwnd increased too slowly) on "stretch ACKs" -- cases where the receiver ACKed more than 1 packet in a single ACK. For example, suppose w is 10 and we get a stretch ACK for 20 packets, so acked is 20. We ought to increase snd_cwnd by 2 (since acked/w = 20/10 = 2), but instead we were only increasing cwnd by 1. This patch fixes that behavior. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:18:37 UTC
e73ebb0 Neal Cardwell 29 January 2015, 01:01:35 UTC tcp: stretch ACK fixes prep LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that cover more than the RFC-specified maximum of 2 packets. These stretch ACKs can cause serious performance shortfalls in common congestion control algorithms that were designed and tuned years ago with receiver hosts that were not using LRO or GRO, and were instead politely ACKing every other packet. This patch series fixes Reno and CUBIC to handle stretch ACKs. This patch prepares for the upcoming stretch ACK bug fix patches. It adds an "acked" parameter to tcp_cong_avoid_ai() to allow for future fixes to tcp_cong_avoid_ai() to correctly handle stretch ACKs, and changes all congestion control algorithms to pass in 1 for the ACKed count. It also changes tcp_slow_start() to return the number of packet ACK "credits" that were not processed in slow start mode, and can be processed by the congestion control module in additive increase mode. In future patches we will fix tcp_cong_avoid_ai() to handle stretch ACKs, and fix Reno and CUBIC handling of stretch ACKs in slow start and additive increase mode. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2015, 06:18:37 UTC
59343cd Linus Torvalds 27 January 2015, 21:55:36 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Don't OOPS on socket AIO, from Christoph Hellwig. 2) Scheduled scans should be aborted upon RFKILL, from Emmanuel Grumbach. 3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish. 4) Fix RCU locking across copy_to_user() in bpf code, from Alexei Starovoitov. 5) Lots of crash, memory leak, short TX packet et al bug fixes in sh_eth from Ben Hutchings. 6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel Borkmann. 7) Fix return value logic for poll handlers in netxen, enic, and bnx2x. From Eric Dumazet and Govindarajulu Varadarajan. 8) Header length calculation fix in mac80211 from Fred Chou. 9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths. From Ezequiel Garcia. 10) udp_diag has bogus logic in it's hash chain skipping, copy same fix tcp diag used. From Herbert Xu. 11) amd-xgbe programs wrong rx flow control register, from Thomas Lendacky. 12) Fix race leading to use after free in ping receive path, from Subash Abhinov Kasiviswanathan. 13) Cache redirect routes otherwise we can get a heavy backlog of rcu jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits) net: don't OOPS on socket aio stmmac: prevent probe drivers to crash kernel bnx2x: fix napi poll return value for repoll ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too sh_eth: Fix DMA-API usage for RX buffers sh_eth: Check for DMA mapping errors on transmit sh_eth: Ensure DMA engines are stopped before freeing buffers sh_eth: Remove RX overflow log messages ping: Fix race in free in receive path udp_diag: Fix socket skipping within chain can: kvaser_usb: Fix state handling upon BUS_ERROR events can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT can: kvaser_usb: Send correct context to URB completion can: kvaser_usb: Do not sleep in atomic context ipv4: try to cache dst_entries which would cause a redirect samples: bpf: relax test_maps check bpf: rcu lock must not be held when calling copy_to_user() net: sctp: fix slab corruption from use after free on INIT collisions net: mv643xx_eth: Fix highmem support in non-TSO egress path sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers ... 27 January 2015, 21:55:36 UTC
06539d3 Christoph Hellwig 27 January 2015, 20:25:33 UTC net: don't OOPS on socket aio Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 20:25:33 UTC
9afec6e Andy Shevchenko 27 January 2015, 16:38:03 UTC stmmac: prevent probe drivers to crash kernel In the case when alloc_netdev fails we return NULL to a caller. But there is no check for NULL in the probe drivers. This patch changes NULL to an error pointer. The function description is amended to reflect what we may get returned. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 20:24:30 UTC
7da323b Linus Torvalds 27 January 2015, 18:04:38 UTC Merge tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "Two powerpc fixes" * tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared powerpc/xmon: Fix another endiannes issue in RTAS call from xmon 27 January 2015, 18:04:38 UTC
41592e2 Linus Torvalds 27 January 2015, 17:02:09 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull one more module fix from Rusty Russell: "SCSI was using module_refcount() to figure out when the module was unloading: this broke with new atomic refcounting. The code is still suspicious, but this solves the WARN_ON()" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scsi: always increment reference count 27 January 2015, 17:02:09 UTC
24e579c Govindarajulu Varadarajan 25 January 2015, 10:39:23 UTC bnx2x: fix napi poll return value for repoll With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When in busy_poll is we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:29:29 UTC
bf693f7 David S. Miller 27 January 2015, 08:28:38 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2015-01-26 Just two small fixes for _decode_session6() where we might decode to wrong header information in some rare situations. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:28:38 UTC
6e9e16e Hannes Frederic Sowa 26 January 2015, 14:11:17 UTC ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:22:14 UTC
2257760 David S. Miller 27 January 2015, 08:18:57 UTC Merge branch 'sh_eth' Ben Hutchings says: ==================== Fixes for sh_eth #3 I'm continuing review and testing of Ethernet support on the R-Car H2 chip. This series fixes the last of the more serious issues I've found. These are not tested on any of the other supported chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:18:57 UTC
52b9fa3 Ben Hutchings 27 January 2015, 00:50:24 UTC sh_eth: Fix DMA-API usage for RX buffers - Use the return value of dma_map_single(), rather than calling virt_to_page() separately - Check for mapping failue - Call dma_unmap_single() rather than dma_sync_single_for_cpu() Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:18:54 UTC
aa3933b Ben Hutchings 27 January 2015, 00:49:47 UTC sh_eth: Check for DMA mapping errors on transmit dma_map_single() may fail if an IOMMU or swiotlb is in use, so we need to check for this. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:18:53 UTC
740c7f3 Ben Hutchings 27 January 2015, 00:49:32 UTC sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:18:53 UTC
dc1d0e6 Ben Hutchings 27 January 2015, 00:41:16 UTC sh_eth: Remove RX overflow log messages If RX traffic is overflowing the FIFO or DMA ring, logging every time this happens just makes things worse. These errors are visible in the statistics anyway. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:18:53 UTC
8d8d67f David S. Miller 27 January 2015, 08:13:05 UTC Merge tag 'linux-can-fixes-for-3.19-20150127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-01-27 this is another pull request for net/master which consists of 4 patches. All 4 patches are contributed by Ahmed S. Darwish, he fixes more problems in the kvaser_usb driver. David, please merge net/master to net-next/master, as we have more kvaser_usb patches in the queue, that target net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:13:05 UTC
fc752f1 subashab@codeaurora.org 23 January 2015, 22:26:02 UTC ping: Fix race in free in receive path An exception is seen in ICMP ping receive path where the skb destructor sock_rfree() tries to access a freed socket. This happens because ping_rcv() releases socket reference with sock_put() and this internally frees up the socket. Later icmp_rcv() will try to free the skb and as part of this, skb destructor is called and which leads to a kernel panic as the socket is freed already in ping_rcv(). -->|exception -007|sk_mem_uncharge -007|sock_rfree -008|skb_release_head_state -009|skb_release_all -009|__kfree_skb -010|kfree_skb -011|icmp_rcv -012|ip_local_deliver_finish Fix this incorrect free by cloning this skb and processing this cloned skb instead. This patch was suggested by Eric Dumazet Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:04:53 UTC
86f3cdd Herbert Xu 23 January 2015, 21:02:40 UTC udp_diag: Fix socket skipping within chain While working on rhashtable walking I noticed that the UDP diag dumping code is buggy. In particular, the socket skipping within a chain never happens, even though we record the number of sockets that should be skipped. As this code was supposedly copied from TCP, this patch does what TCP does and resets num before we walk a chain. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 08:02:41 UTC
e638642 Ahmed S. Darwish 26 January 2015, 05:25:43 UTC can: kvaser_usb: Fix state handling upon BUS_ERROR events While being in an ERROR_WARNING state, and receiving further bus error events with error counters still in the ERROR_WARNING range of 97-127 inclusive, the state handling code erroneously reverts back to ERROR_ACTIVE. Per the CAN standard, only revert to ERROR_ACTIVE when the error counters are less than 96. Moreover, in certain Kvaser models, the BUS_ERROR flag is always set along with undefined bits in the M16C status register. Thus use bitwise operators instead of full equality for checking that register against bus errors. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 27 January 2015, 07:55:09 UTC
14c10c2 Ahmed S. Darwish 26 January 2015, 05:24:06 UTC can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT On some x86 laptops, plugging a Kvaser device again after an unplug makes the firmware always ignore the very first command. For such a case, provide some room for retries instead of completely exiting the driver init code. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 27 January 2015, 07:55:09 UTC
3803fa6 Ahmed S. Darwish 26 January 2015, 05:22:54 UTC can: kvaser_usb: Send correct context to URB completion Send expected argument to the URB completion hander: a CAN netdevice instead of the network interface private context `kvaser_usb_net_priv'. This was discovered by having some garbage in the kernel log in place of the netdevice names: can0 and can1. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 27 January 2015, 07:55:08 UTC
ded5006 Ahmed S. Darwish 26 January 2015, 05:20:39 UTC can: kvaser_usb: Do not sleep in atomic context Upon receiving a hardware event with the BUS_RESET flag set, the driver kills all of its anchored URBs and resets all of its transmit URB contexts. Unfortunately it does so under the context of URB completion handler `kvaser_usb_read_bulk_callback()', which is often called in an atomic context. While the device is flooded with many received error packets, usb_kill_urb() typically sleeps/reschedules till the transfer request of each killed URB in question completes, leading to the sleep in atomic bug. [3] In v2 submission of the original driver patch [1], it was stated that the URBs kill and tx contexts reset was needed since we don't receive any tx acknowledgments later and thus such resources will be locked down forever. Fortunately this is no longer needed since an earlier bugfix in this patch series is now applied: all tx URB contexts are reset upon CAN channel close. [2] Moreover, a BUS_RESET is now treated _exactly_ like a BUS_OFF event, which is the recommended handling method advised by the device manufacturer. [1] http://article.gmane.org/gmane.linux.network/239442 http://www.webcitation.org/6Vr2yagAQ [2] can: kvaser_usb: Reset all URB tx contexts upon channel close 889b77f7fd2bcc922493d73a4c51d8a851505815 [3] Stacktrace: <IRQ> [<ffffffff8158de87>] dump_stack+0x45/0x57 [<ffffffff8158b60c>] __schedule_bug+0x41/0x4f [<ffffffff815904b1>] __schedule+0x5f1/0x700 [<ffffffff8159360a>] ? _raw_spin_unlock_irqrestore+0xa/0x10 [<ffffffff81590684>] schedule+0x24/0x70 [<ffffffff8147d0a5>] usb_kill_urb+0x65/0xa0 [<ffffffff81077970>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff8147d7d8>] usb_kill_anchored_urbs+0x48/0x80 [<ffffffffa01f4028>] kvaser_usb_unlink_tx_urbs+0x18/0x50 [kvaser_usb] [<ffffffffa01f45d0>] kvaser_usb_rx_error+0xc0/0x400 [kvaser_usb] [<ffffffff8108b14a>] ? vprintk_default+0x1a/0x20 [<ffffffffa01f5241>] kvaser_usb_read_bulk_callback+0x4c1/0x5f0 [kvaser_usb] [<ffffffff8147a73e>] __usb_hcd_giveback_urb+0x5e/0xc0 [<ffffffff8147a8a1>] usb_hcd_giveback_urb+0x41/0x110 [<ffffffffa0008748>] finish_urb+0x98/0x180 [ohci_hcd] [<ffffffff810cd1a7>] ? acct_account_cputime+0x17/0x20 [<ffffffff81069f65>] ? local_clock+0x15/0x30 [<ffffffffa000a36b>] ohci_work+0x1fb/0x5a0 [ohci_hcd] [<ffffffff814fbb31>] ? process_backlog+0xb1/0x130 [<ffffffffa000cd5b>] ohci_irq+0xeb/0x270 [ohci_hcd] [<ffffffff81479fc1>] usb_hcd_irq+0x21/0x30 [<ffffffff8108bfd3>] handle_irq_event_percpu+0x43/0x120 [<ffffffff8108c0ed>] handle_irq_event+0x3d/0x60 [<ffffffff8108ec84>] handle_fasteoi_irq+0x74/0x110 [<ffffffff81004dfd>] handle_irq+0x1d/0x30 [<ffffffff81004727>] do_IRQ+0x57/0x100 [<ffffffff8159482a>] common_interrupt+0x6a/0x6a Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 27 January 2015, 07:55:08 UTC
7d63585 David S. Miller 27 January 2015, 01:32:24 UTC Merge tag 'mac80211-for-davem-2015-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Another set of last-minute fixes: * fix station double-removal when suspending while associating * fix the HT (802.11n) header length calculation * fix the CCK radiotap flag used for monitoring, a pretty old regression but a simple one-liner * fix per-station group-key handling Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 01:32:24 UTC
df4d925 Hannes Frederic Sowa 23 January 2015, 11:01:26 UTC ipv4: try to cache dst_entries which would cause a redirect Not caching dst_entries which cause redirects could be exploited by hosts on the same subnet, causing a severe DoS attack. This effect aggravated since commit f88649721268999 ("ipv4: fix dst race in sk_dst_get()"). Lookups causing redirects will be allocated with DST_NOCACHE set which will force dst_release to free them via RCU. Unfortunately waiting for RCU grace period just takes too long, we can end up with >1M dst_entries waiting to be released and the system will run OOM. rcuos threads cannot catch up under high softirq load. Attaching the flag to emit a redirect later on to the specific skb allows us to cache those dst_entries thus reducing the pressure on allocation and deallocation. This issue was discovered by Marcelo Leitner. Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 01:28:27 UTC
412d290 David S. Miller 27 January 2015, 01:20:48 UTC Merge branch 'bpf' Alexei Starovoitov says: ==================== bpf: fix two bugs Michael Holzheu caught two issues (in bpf syscall and in the test). Fix them. Details in corresponding patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 01:20:48 UTC
ba1a68b Alexei Starovoitov 23 January 2015, 01:11:09 UTC samples: bpf: relax test_maps check hash map is unordered, so get_next_key() iterator shouldn't rely on particular order of elements. So relax this test. Fixes: ffb65f27a155 ("bpf: add a testsuite for eBPF maps") Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 01:20:40 UTC
8ebe667 Alexei Starovoitov 23 January 2015, 01:11:08 UTC bpf: rcu lock must not be held when calling copy_to_user() BUG: sleeping function called from invalid context at mm/memory.c:3732 in_atomic(): 0, irqs_disabled(): 0, pid: 671, name: test_maps 1 lock held by test_maps/671: #0: (rcu_read_lock){......}, at: [<0000000000264190>] map_lookup_elem+0xe8/0x260 Call Trace: ([<0000000000115b7e>] show_trace+0x12e/0x150) [<0000000000115c40>] show_stack+0xa0/0x100 [<00000000009b163c>] dump_stack+0x74/0xc8 [<000000000017424a>] ___might_sleep+0x23a/0x248 [<00000000002b58e8>] might_fault+0x70/0xe8 [<0000000000264230>] map_lookup_elem+0x188/0x260 [<0000000000264716>] SyS_bpf+0x20e/0x840 Fix it by allocating temporary buffer to store map element value. Fixes: db20fd2b0108 ("bpf: add lookup/update/delete/iterate methods to BPF maps") Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 01:20:40 UTC
600ddd6 Daniel Borkmann 22 January 2015, 17:26:54 UTC net: sctp: fix slab corruption from use after free on INIT collisions When hitting an INIT collision case during the 4WHS with AUTH enabled, as already described in detail in commit 1be9a950c646 ("net: sctp: inherit auth_capable on INIT collisions"), it can happen that we occasionally still remotely trigger the following panic on server side which seems to have been uncovered after the fix from commit 1be9a950c646 ... [ 533.876389] BUG: unable to handle kernel paging request at 00000000ffffffff [ 533.913657] IP: [<ffffffff811ac385>] __kmalloc+0x95/0x230 [ 533.940559] PGD 5030f2067 PUD 0 [ 533.957104] Oops: 0000 [#1] SMP [ 533.974283] Modules linked in: sctp mlx4_en [...] [ 534.939704] Call Trace: [ 534.951833] [<ffffffff81294e30>] ? crypto_init_shash_ops+0x60/0xf0 [ 534.984213] [<ffffffff81294e30>] crypto_init_shash_ops+0x60/0xf0 [ 535.015025] [<ffffffff8128c8ed>] __crypto_alloc_tfm+0x6d/0x170 [ 535.045661] [<ffffffff8128d12c>] crypto_alloc_base+0x4c/0xb0 [ 535.074593] [<ffffffff8160bd42>] ? _raw_spin_lock_bh+0x12/0x50 [ 535.105239] [<ffffffffa0418c11>] sctp_inet_listen+0x161/0x1e0 [sctp] [ 535.138606] [<ffffffff814e43bd>] SyS_listen+0x9d/0xb0 [ 535.166848] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b ... or depending on the the application, for example this one: [ 1370.026490] BUG: unable to handle kernel paging request at 00000000ffffffff [ 1370.026506] IP: [<ffffffff811ab455>] kmem_cache_alloc+0x75/0x1d0 [ 1370.054568] PGD 633c94067 PUD 0 [ 1370.070446] Oops: 0000 [#1] SMP [ 1370.085010] Modules linked in: sctp kvm_amd kvm [...] [ 1370.963431] Call Trace: [ 1370.974632] [<ffffffff8120f7cf>] ? SyS_epoll_ctl+0x53f/0x960 [ 1371.000863] [<ffffffff8120f7cf>] SyS_epoll_ctl+0x53f/0x960 [ 1371.027154] [<ffffffff812100d3>] ? anon_inode_getfile+0xd3/0x170 [ 1371.054679] [<ffffffff811e3d67>] ? __alloc_fd+0xa7/0x130 [ 1371.080183] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b With slab debugging enabled, we can see that the poison has been overwritten: [ 669.826368] BUG kmalloc-128 (Tainted: G W ): Poison overwritten [ 669.826385] INFO: 0xffff880228b32e50-0xffff880228b32e50. First byte 0x6a instead of 0x6b [ 669.826414] INFO: Allocated in sctp_auth_create_key+0x23/0x50 [sctp] age=3 cpu=0 pid=18494 [ 669.826424] __slab_alloc+0x4bf/0x566 [ 669.826433] __kmalloc+0x280/0x310 [ 669.826453] sctp_auth_create_key+0x23/0x50 [sctp] [ 669.826471] sctp_auth_asoc_create_secret+0xcb/0x1e0 [sctp] [ 669.826488] sctp_auth_asoc_init_active_key+0x68/0xa0 [sctp] [ 669.826505] sctp_do_sm+0x29d/0x17c0 [sctp] [...] [ 669.826629] INFO: Freed in kzfree+0x31/0x40 age=1 cpu=0 pid=18494 [ 669.826635] __slab_free+0x39/0x2a8 [ 669.826643] kfree+0x1d6/0x230 [ 669.826650] kzfree+0x31/0x40 [ 669.826666] sctp_auth_key_put+0x19/0x20 [sctp] [ 669.826681] sctp_assoc_update+0x1ee/0x2d0 [sctp] [ 669.826695] sctp_do_sm+0x674/0x17c0 [sctp] Since this only triggers in some collision-cases with AUTH, the problem at heart is that sctp_auth_key_put() on asoc->asoc_shared_key is called twice when having refcnt 1, once directly in sctp_assoc_update() and yet again from within sctp_auth_asoc_init_active_key() via sctp_assoc_update() on the already kzfree'd memory, which is also consistent with the observation of the poison decrease from 0x6b to 0x6a (note: the overwrite is detected at a later point in time when poison is checked on new allocation). Reference counting of auth keys revisited: Shared keys for AUTH chunks are being stored in endpoints and associations in endpoint_shared_keys list. On endpoint creation, a null key is being added; on association creation, all endpoint shared keys are being cached and thus cloned over to the association. struct sctp_shared_key only holds a pointer to the actual key bytes, that is, struct sctp_auth_bytes which keeps track of users internally through refcounting. Naturally, on assoc or enpoint destruction, sctp_shared_key are being destroyed directly and the reference on sctp_auth_bytes dropped. User space can add keys to either list via setsockopt(2) through struct sctp_authkey and by passing that to sctp_auth_set_key() which replaces or adds a new auth key. There, sctp_auth_create_key() creates a new sctp_auth_bytes with refcount 1 and in case of replacement drops the reference on the old sctp_auth_bytes. A key can be set active from user space through setsockopt() on the id via sctp_auth_set_active_key(), which iterates through either endpoint_shared_keys and in case of an assoc, invokes (one of various places) sctp_auth_asoc_init_active_key(). sctp_auth_asoc_init_active_key() computes the actual secret from local's and peer's random, hmac and shared key parameters and returns a new key directly as sctp_auth_bytes, that is asoc->asoc_shared_key, plus drops the reference if there was a previous one. The secret, which where we eventually double drop the ref comes from sctp_auth_asoc_set_secret() with intitial refcount of 1, which also stays unchanged eventually in sctp_assoc_update(). This key is later being used for crypto layer to set the key for the hash in crypto_hash_setkey() from sctp_auth_calculate_hmac(). To close the loop: asoc->asoc_shared_key is freshly allocated secret material and independant of the sctp_shared_key management keeping track of only shared keys in endpoints and assocs. Hence, also commit 4184b2a79a76 ("net: sctp: fix memory leak in auth key management") is independant of this bug here since it concerns a different layer (though same structures being used eventually). asoc->asoc_shared_key is reference dropped correctly on assoc destruction in sctp_association_free() and when active keys are being replaced in sctp_auth_asoc_init_active_key(), it always has a refcount of 1. Hence, it's freed prematurely in sctp_assoc_update(). Simple fix is to remove that sctp_auth_key_put() from there which fixes these panics. Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 01:02:05 UTC
4adca1c Linus Torvalds 27 January 2015, 00:25:42 UTC Merge branch 'akpm' (patches from Andrew Morton) Merge misc fixes from Andrew Morton: "Six fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/rtc/rtc-s5m.c: terminate s5m_rtc_id array with empty element printk: add dummy routine for when CONFIG_PRINTK=n mm/vmscan: fix highidx argument type memcg: remove extra newlines from memcg oom kill log x86, build: replace Perl script with Shell script mm: page_alloc: embed OOM killing naturally into allocation slowpath 27 January 2015, 00:25:42 UTC
9e91141 Ezequiel Garcia 22 January 2015, 14:33:02 UTC net: mv643xx_eth: Fix highmem support in non-TSO egress path Commit 69ad0dd7af22b61d9e0e68e56b6290121618b0fb Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Mon May 19 13:59:59 2014 -0300 net: mv643xx_eth: Use dma_map_single() to map the skb fragments caused a nasty regression by removing the support for highmem skb fragments. By using page_address() to get the address of a fragment's page, we are assuming a lowmem page. However, such assumption is incorrect, as fragments can be in highmem pages, resulting in very nasty issues. This commit fixes this by using the skb_frag_dma_map() helper, which takes care of mapping the skb fragment properly. Additionally, the type of mapping is now tracked, so it can be unmapped using dma_unmap_page or dma_unmap_single when appropriate. This commit also fixes the error path in txq_init() to release the resources properly. Fixes: 69ad0dd7af22 ("net: mv643xx_eth: Use dma_map_single() to map the skb fragments") Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:14:40 UTC
9d08da9 David S. Miller 27 January 2015, 00:13:20 UTC Merge branch 'sh_eth' Ben Hutchings says: ==================== Fixes for sh_eth #2 I'm continuing review and testing of Ethernet support on the R-Car H2 chip. This series fixes more of the issues I've found, but it won't be the last set. These are not tested on any of the other supported chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:13:20 UTC
283e38d Ben Hutchings 22 January 2015, 12:44:08 UTC sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers In order to stop the RX path accessing the RX ring while it's being stopped or resized, we clear the interrupt mask (EESIPR) and then call free_irq() or synchronise_irq(). This is insufficient because the interrupt handler or NAPI poller may set EESIPR again after we clear it. Also, in sh_eth_set_ringparam() we currently don't disable NAPI polling at all. I could easily trigger a crash by running the loop: while ethtool -G eth0 rx 128 && ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. To fix this: - Add a software flag (irq_enabled) to signal whether interrupts should be enabled - In the interrupt handler, if the flag is clear then clear EESIPR and return - In the NAPI poller, if the flag is clear then don't set EESIPR - Set the flag before enabling interrupts in sh_eth_dev_init() and sh_eth_set_ringparam() - Clear the flag and serialise with the interrupt and NAPI handlers before clearing EESIPR in sh_eth_close() and sh_eth_set_ringparam() After this, I could run the loop for 100,000 iterations successfully. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:13:15 UTC
084236d Ben Hutchings 22 January 2015, 12:41:34 UTC sh_eth: Fix crash or memory leak when resizing rings on device that is down If the device is down then no packet buffers should be allocated. We also must not touch its registers as it may be powered off. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:13:15 UTC
bd88891 Ben Hutchings 22 January 2015, 12:40:25 UTC sh_eth: Detach net device when stopping queue to resize DMA rings We must only ever stop TX queues when they are full or the net device is not 'ready' so far as the net core, and specifically the watchdog, is concerned. Otherwise, the watchdog may fire *immediately* if no packets have been added to the queue in the last 5 seconds. What's more, sh_eth_tx_timeout() will likely crash if called while we're resizing the TX ring. I could easily trigger this by running the loop: while ethtool -G eth0 rx 128 && ethtool -G eth0 rx 64; do echo -n .; done Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:13:15 UTC
eebfb64 Ben Hutchings 22 January 2015, 12:40:13 UTC sh_eth: Fix padding of short frames on TX If an skb to be transmitted is shorter than the minimum Ethernet frame length, we currently set the DMA descriptor length to the minimum but do not add zero-padding. This could result in leaking sensitive data. We also pass different lengths to dma_map_single() and dma_unmap_single(). Use skb_padto() to pad properly, before calling dma_map_single(). Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:13:15 UTC
02a5416 Mugunthan V N 22 January 2015, 09:49:22 UTC drivers: net: cpsw: discard dual emac default vlan configuration In Dual EMAC, the default VLANs are used to segregate Rx packets between the ports, so adding the same default VLAN to the switch will affect the normal packet transfers. So returning error on addition of dual EMAC default VLANs. Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to break dual EMAC port separations. Fixes: d9ba8f9e6298 (driver: net: ethernet: cpsw: dual emac interface implementation) Cc: <stable@vger.kernel.org> # v3.9+ Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2015, 00:05:50 UTC
b6663ad David S. Miller 26 January 2015, 23:50:24 UTC Merge branch 'cls_bpf' Daniel Borkmann says: ==================== Two cls_bpf fixes Found them while doing a review on act_bpf and going over the cls_bpf code again. Will also address the first issue in act_bpf as it needs to be fixed there, too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 23:50:24 UTC
3f2ab13 Daniel Borkmann 22 January 2015, 09:41:02 UTC net: cls_bpf: fix auto generation of per list handles When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 23:50:19 UTC
7913ecf Daniel Borkmann 22 January 2015, 09:41:01 UTC net: cls_bpf: fix size mismatch on filter preparation In cls_bpf_modify_existing(), we read out the number of filter blocks, do some sanity checks, allocate a block on that size, and copy over the BPF instruction blob from user space, then pass everything through the classic BPF checker prior to installation of the classifier. We should reject mismatches here, there are 2 scenarios: the number of filter blocks could be smaller than the provided instruction blob, so we do a partial copy of the BPF program, and thus the instructions will either be rejected from the verifier or a valid BPF program will be run; in the other case, we'll end up copying more than we're supposed to, and most likely the trailing garbage will be rejected by the verifier as well (i.e. we need to fit instruction pattern, ret {A,K} needs to be last instruction, load/stores must be correct, etc); in case not, we would leak memory when dumping back instruction patterns. The code should have only used nla_len() as Dave noted to avoid this from the beginning. Anyway, lets fix it by rejecting such load attempts. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 23:50:18 UTC
9e79ce6 David S. Miller 26 January 2015, 23:24:14 UTC Merge tag 'linux-can-fixes-for-3.19-20150121' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-01-21 this is a pull request for v3.19, net/master, which consists of a single patch. Viktor Babrian fixes the issue in the c_can dirver, that the CAN interface might continue to send frames after the interface has been shut down. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 23:24:14 UTC
c976a67 Linus Torvalds 26 January 2015, 23:17:34 UTC Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "The lifetime rules of cgroup hierarchies always have been somewhat counter-intuitive and cgroup core tried to enforce that hierarchies w/o userland-visible usages must die in finite amount of time so that the controllers can be reused for other hierarchies; unfortunately, this can't be implemented reasonably for the memory controller - the kmemcg part doesn't have any way to forcefully drain the existing usages, leading to an interruptible hang if a following mount attempts to use the controller in any way. So, it seems like we're stuck with "hierarchies live on till they die whenever that may be" at least for now. This pretty much confines attaching controllers to hierarchies to before the hierarchies are actively used by making dynamic configurations post active usages unreliable. This has never been reliable and should be fine in practice given how cgroups are used. After the patch, hierarchies aren't killed if it isn't already drained. A following mount attempt of the same mount options will reuse the existing hierarchy. Mount attempts with differing options will fail w/ -EBUSY" * 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: prevent mount hang due to memory controller lifetime 26 January 2015, 23:17:34 UTC
abe3b26 Linus Torvalds 26 January 2015, 22:52:08 UTC Merge tag 'regulator-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "One correctness fix here for the s2mps11 driver which would have resulted in some of the regulators being completely broken together with a fix for locking in regualtor_put() (which is fortunately rarely called at all in practical systems)" * tag 'regulator-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mps11: Fix wrong calculation of register offset regulator: core: fix race condition in regulator_put() 26 January 2015, 22:52:08 UTC
8d6b932 Linus Torvalds 26 January 2015, 22:51:19 UTC Merge tag 'spi-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver specific fixes here, some fixes for issues introduced and discovered during recent work on the DesignWare driver (which has been getting a lot of attention recently) and a couple of other drivers. All serious things for people who run into them" * tag 'spi-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: dw: amend warning message spi: sh-msiof: fix MDR1_FLD_MASK value spi: dw-mid: fix FIFO size spi: dw: Fix detecting FIFO depth spi/pxa2xx: Clear cur_chip pointer before starting next message 26 January 2015, 22:51:19 UTC
45cd15e Andrey Ryabinin 26 January 2015, 20:58:46 UTC drivers/rtc/rtc-s5m.c: terminate s5m_rtc_id array with empty element Array of platform_device_id elements should be terminated with empty element. Fixes: 5bccae6ec458 ("rtc: s5m-rtc: add real-time clock driver for s5m8767") Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2015, 21:37:19 UTC
07261ed Pranith Kumar 26 January 2015, 20:58:43 UTC printk: add dummy routine for when CONFIG_PRINTK=n There are missing dummy routines for log_buf_addr_get() and log_buf_len_get() for when CONFIG_PRINTK is not set causing build failures. This patch adds these dummy routines at the appropriate location. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Petr Mladek <pmladek@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2015, 21:37:18 UTC
17636fa Michael S. Tsirkin 26 January 2015, 20:58:41 UTC mm/vmscan: fix highidx argument type for_each_zone_zonelist_nodemask wants an enum zone_type argument, but is passed gfp_t: mm/vmscan.c:2658:9: expected int enum zone_type [signed] highest_zoneidx mm/vmscan.c:2658:9: got restricted gfp_t [usertype] gfp_mask mm/vmscan.c:2658:9: warning: incorrect type in argument 2 (different base types) mm/vmscan.c:2658:9: expected int enum zone_type [signed] highest_zoneidx mm/vmscan.c:2658:9: got restricted gfp_t [usertype] gfp_mask convert argument to the correct type. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2015, 21:37:18 UTC
0346dad Greg Thelen 26 January 2015, 20:58:38 UTC memcg: remove extra newlines from memcg oom kill log Commit e61734c55c24 ("cgroup: remove cgroup->name") added two extra newlines to memcg oom kill log messages. This makes dmesg hard to read and parse. The issue affects 3.15+. Example: Task in /t <<< extra #1 killed as a result of limit of /t <<< extra #2 memory: usage 102400kB, limit 102400kB, failcnt 274712 Remove the extra newlines from memcg oom kill messages, so the messages look like: Task in /t killed as a result of limit of /t memory: usage 102400kB, limit 102400kB, failcnt 240649 Fixes: e61734c55c24 ("cgroup: remove cgroup->name") Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2015, 21:37:18 UTC
d69911a Kees Cook 26 January 2015, 20:58:35 UTC x86, build: replace Perl script with Shell script Commit e6023367d779 ("x86, kaslr: Prevent .bss from overlaping initrd") added Perl to the required build environment. This reimplements in shell the Perl script used to find the size of the kernel with bss and brk added. Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Rob Landley <rob@landley.net> Acked-by: Rob Landley <rob@landley.net> Cc: Anca Emanuel <anca.emanuel@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2015, 21:37:18 UTC
9879de7 Johannes Weiner 26 January 2015, 20:58:32 UTC mm: page_alloc: embed OOM killing naturally into allocation slowpath The OOM killing invocation does a lot of duplicative checks against the task's allocation context. Rework it to take advantage of the existing checks in the allocator slowpath. The OOM killer is invoked when the allocator is unable to reclaim any pages but the allocation has to keep looping. Instead of having a check for __GFP_NORETRY hidden in oom_gfp_allowed(), just move the OOM invocation to the true branch of should_alloc_retry(). The __GFP_FS check from oom_gfp_allowed() can then be moved into the OOM avoidance branch in __alloc_pages_may_oom(), along with the PF_DUMPCORE test. __alloc_pages_may_oom() can then signal to the caller whether the OOM killer was invoked, instead of requiring it to duplicate the order and high_zoneidx checks to guess this when deciding whether to continue. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2015, 21:37:18 UTC
06a5687 Mark Brown 26 January 2015, 11:16:27 UTC Merge remote-tracking branches 'spi/fix/dw', 'spi/fix/msiof' and 'spi/fix/pxa2xx' into spi-linus 26 January 2015, 11:16:27 UTC
03a6058 David S. Miller 26 January 2015, 07:38:20 UTC Merge branch 's390' Ursula Braun says: ==================== s390/qeth patches for net here are two s390/qeth patches built for net. One patch is quite large, but we would like to fix the locking warning seen in recent kernels as soon as possible. But if you want me to submit these patches for net-next, I will do. Or Gerlitz says: ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 07:38:20 UTC
1aec42b Thomas Richter 21 January 2015, 12:39:10 UTC 390/qeth: Fix locking warning during qeth device setup Do not wait for channel command buffers in IPA commands. The potential wait could be done while holding a spin lock and causes in recent kernels such a bug if kernel lock debugging is enabled: kernel: BUG: sleeping function called from invalid context at drivers/s390/net/qeth_core_main.c: 794 kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 2031, name: NetworkManager kernel: 2 locks held by NetworkManager/2031: kernel: #0: (rtnl_mutex){+.+.+.}, at: [<00000000006e0d7a>] rtnetlink_rcv+0x32/0x50 kernel: #1: (_xmit_ETHER){+.....}, at: [<00000000006cfe90>] dev_set_rx_mode+0x30/0x50 kernel: CPU: 0 PID: 2031 Comm: NetworkManager Not tainted 3.18.0-rc5-next-20141124 #1 kernel: 00000000275fb1f0 00000000275fb280 0000000000000002 0000000000000000 00000000275fb320 00000000275fb298 00000000275fb298 00000000007e326a 0000000000000000 000000000099ce2c 00000000009b4988 000000000000000b 00000000275fb2e0 00000000275fb280 0000000000000000 0000000000000000 0000000000000000 00000000001129c8 00000000275fb280 00000000275fb2e0 kernel: Call Trace: kernel: ([<00000000001128b0>] show_trace+0xf8/0x158) kernel: [<000000000011297a>] show_stack+0x6a/0xe8 kernel: [<00000000007e995a>] dump_stack+0x82/0xb0 kernel: [<000000000017d668>] ___might_sleep+0x170/0x228 kernel: [<000003ff80026f0e>] qeth_wait_for_buffer+0x36/0xd0 [qeth] kernel: [<000003ff80026fe2>] qeth_get_ipacmd_buffer+0x3a/0xc0 [qeth] kernel: [<000003ff80105078>] qeth_l3_send_setdelmc+0x58/0xf8 [qeth_l3] kernel: [<000003ff8010b1fe>] qeth_l3_set_ip_addr_list+0x2c6/0x848 [qeth_l3] kernel: [<000003ff8010bbb4>] qeth_l3_set_multicast_list+0x434/0xc48 [qeth_l3] kernel: [<00000000006cfe9a>] dev_set_rx_mode+0x3a/0x50 kernel: [<00000000006cff90>] __dev_open+0xe0/0x140 kernel: [<00000000006d02a0>] __dev_change_flags+0xa0/0x178 kernel: [<00000000006d03a8>] dev_change_flags+0x30/0x70 kernel: [<00000000006e14ee>] do_setlink+0x346/0x9a0 ... The device driver has plenty of command buffers available per channel for channel command communication. In the extremely rare case when there is no command buffer available, return a NULL pointer and issue a warning in the kernel log. The caller handles the case when a NULL pointer is encountered and returns an error. In the case the wait for command buffer is possible (because no lock is held as in the OSN case), still wait until a channel command buffer is available. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 07:38:16 UTC
efbbc1d Eugene Crosser 21 January 2015, 12:39:09 UTC qeth: clean up error handling In the functions that are registering and unregistering MAC addresses in the qeth-handled hardware, remove callback functions that are unnesessary, as only the return code is analyzed. Translate hardware response codes to semi-standard 'errno'-like codes for readability. Add kernel-doc description to the internal API function qeth_send_control_data(). Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 07:38:16 UTC
b0a1ba5 Martin KaFai Lau 21 January 2015, 03:16:02 UTC ipv6: Fix __ip6_route_redirect In my last commit (a3c00e4: ipv6: Remove BACKTRACK macro), the changes in __ip6_route_redirect is incorrect. The following case is missed: 1. The for loop tries to find a valid gateway rt. If it fails to find one, rt will be NULL. 2. When rt is NULL, it is set to the ip6_null_entry. 3. The newly added 'else if', from a3c00e4, will stop the backtrack from happening. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 06:09:51 UTC
26bc420 Linus Torvalds 26 January 2015, 04:04:41 UTC Linux 3.19-rc6 26 January 2015, 04:04:41 UTC
1474630 Linus Torvalds 26 January 2015, 02:11:17 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Hopefully the last round of fixes for 3.19 - regression fix for the LDT changes - regression fix for XEN interrupt handling caused by the APIC changes - regression fixes for the PAT changes - last minute fixes for new the MPX support - regression fix for 32bit UP - fix for a long standing relocation issue on 64bit tagged for stable - functional fix for the Hyper-V clocksource tagged for stable - downgrade of a pr_err which tends to confuse users Looks a bit on the large side, but almost half of it are valuable comments" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" x86, tls, ldt: Stop checking lm in LDT_empty x86, mpx: Strictly enforce empty prctl() args x86, mpx: Fix potential performance issue on unmaps x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels x86, hyperv: Mark the Hyper-V clocksource as being continuous x86: Don't rely on VMWare emulating PAT MSR correctly x86, irq: Properly tag virtualization entry in /proc/interrupts x86, boot: Skip relocs when load address unchanged x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable() x86/xen: Treat SCI interrupt as normal GSI interrupt 26 January 2015, 02:11:17 UTC
4d2f0ef Linus Torvalds 26 January 2015, 02:07:01 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "From the irqchip departement you get: - regression fix for omap-intc - regression fix for atmel-aic-common - functional correctness fix for hip04 - type mismatch fix for gic-v3-its - proper error pointer check for mtd-sysirq Mostly one and two liners except for the omap regression fix which is slightly larger than desired" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type irqchip: omap-intc: Fix legacy DMA regression irqchip: gic-v3-its: Fix use of max with decimal constant irqchip: hip04: Initialize hip04_cpu_map to 0xffff irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check 26 January 2015, 02:07:01 UTC
b73f0c8 Linus Torvalds 26 January 2015, 01:47:34 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes: - regression fix for exynos_mct clocksource - trivial build fix for kona clocksource - functional one liner fix for the sh_tmu clocksource - two validation fixes to prevent (root only) data corruption in the kernel via settimeofday and adjtimex. Tagged for stable" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: adjtimex: Validate the ADJ_FREQUENCY values time: settimeofday: Validate the values of tv from user clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast clocksource: kona: fix __iomem annotation clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write 26 January 2015, 01:47:34 UTC
71a59b1 Linus Torvalds 26 January 2015, 01:29:06 UTC Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A week's worth of fixes for various ARM platforms. Diff wise, the largest fix is for OMAP to deal with how GIC now registers interrupts (irq_domain_add_legacy() -> irq_domain_add_linear() changes). Besides this, a few more renesas platforms needed the GIC instatiation done for legacy boards. There's also a fix that disables coherency of mvebu due to issues, and a few other smaller fixes" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add baud rate to Juno stdout-path ARM: dts: imx25: Fix PWM "per" clocks bus: mvebu-mbus: fix support of MBus window 13 Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes ARM: mvebu: completely disable hardware I/O coherency ARM: OMAP: Work around hardcoded interrupts ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds arm: boot: dts: dra7: enable dwc3 suspend PHY quirk 26 January 2015, 01:29:06 UTC
80a7555 Linus Torvalds 26 January 2015, 01:27:18 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes - deadlock in CIFS and build breakage in cris serial driver (resurfaced f_dentry in there)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Convert file->f_dentry->d_inode to file_inode() fix deadlock in cifs_ioctl_clone() 26 January 2015, 01:27:18 UTC
bfc835b Linus Torvalds 26 January 2015, 01:25:01 UTC Merge tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Two stable fixes for dm-cache and one 3.19 DM core fix: - fix potential for dm-cache metadata corruption via stale metadata buffers being used when switching an inactive cache table to active; this could occur due to each table having it's own bufio client rather than sharing the client between tables. - fix dm-cache target to properly account for discard IO while suspending otherwise IO quiescing could complete prematurely. - fix DM core's handling of multiple internal suspends by maintaining an 'internal_suspend_count' and only resuming the device when this count drops to zero" * tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix handling of multiple internal suspends dm cache: fix problematic dual use of a single migration count variable dm cache: share cache-metadata object across inactive and active DM tables 26 January 2015, 01:25:01 UTC
8e908e9 Linus Torvalds 26 January 2015, 01:23:34 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull two block layer fixes from Jens Axboe: "Two small patches that should make it into 3.19: - a fixup from me for NVMe, making the cq_vector a signed variable. Otherwise our -1 comparison fails, and commit 2b25d981790b doesn't do what it was supposed to. - a fixup for the hotplug handling for blk-mq from Ming Lei, using the proper kobject referencing to ensure we release resources at the right time" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: fix hctx/ctx kobject use-after-free NVMe: cq_vector should be signed 26 January 2015, 01:23:34 UTC
24df898 Vivien Didelot 21 January 2015, 00:13:32 UTC net: dsa: set slave MII bus PHY mask When registering a mdio bus, Linux assumes than every port has a PHY and tries to scan it. If a switch port has no PHY registered, DSA will fail to register the slave MII bus. To fix this, set the slave MII bus PHY mask to the switch PHYs mask. As an example, if we use a Marvell MV88E6352 (which is a 7-port switch with no registered PHYs for port 5 and port 6), with the following declared names: static struct dsa_chip_data switch_cdata = { [...] .port_names[0] = "sw0", .port_names[1] = "sw1", .port_names[2] = "sw2", .port_names[3] = "sw3", .port_names[4] = "sw4", .port_names[5] = "cpu", }; DSA will fail to create the switch instance. With the PHY mask set for the slave MII bus, only the PHY for ports 0-4 will be scanned and the instance will be successfully created. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2015, 00:00:54 UTC
2aab952 Mahesh Bandewar 25 January 2015, 05:53:43 UTC ipvlan: fix incorrect usage of IS_ERR() macro in IPv6 code path. The ip6_route_output() always returns a valid dst pointer unlike in IPv4 case. So the validation has to be different from the IPv4 path. Correcting that error in this patch. This was picked up by a static checker with a following warning - drivers/net/ipvlan/ipvlan_core.c:380 ipvlan_process_v6_outbound() warn: 'dst' isn't an ERR_PTR Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2015, 08:24:19 UTC
6b8d911 Sasha Levin 24 January 2015, 01:47:00 UTC net: llc: use correct size for sysctl timeout entries The timeout entries are sizeof(int) rather than sizeof(long), which means that when they were getting read we'd also leak kernel memory to userspace along with the timeout values. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2015, 08:23:21 UTC
6088bee Eric Dumazet 22 January 2015, 15:56:18 UTC netxen: fix netxen_nic_poll() logic NAPI poll logic now enforces that a poller returns exactly the budget when it wants to be called again. If a driver limits TX completion, it has to return budget as well when the limit is hit, not the number of received packets. Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Cc: Manish Chopra <manish.chopra@qlogic.com> Acked-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2015, 08:21:45 UTC
f104fed Govindarajulu Varadarajan 20 January 2015, 13:16:15 UTC enic: fix rx napi poll return value With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When we are in busy_poll we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2015, 06:39:03 UTC
5d7b045 David S. Miller 25 January 2015, 05:55:26 UTC Merge tag 'wireless-drivers-for-davem-2015-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers ath9k: * fix an IRQ storm caused by commit 872b5d814f99 iwlwifi: * A fix for scan that fixes a firmware assertion * A fix that improves roaming behavior. Same fix has been tested for a while in iwldvm. This is a bit of a work around, but the real fix should be in mac80211 and will come later. * A fix for BARs that avoids a WARNING. * one fix for rfkill while scheduled scan is running. Linus's system hit this issue. WiFi would be unavailable after this has happpened because of bad state in cfg80211. Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2015, 05:55:26 UTC
9143e39 Nimrod Andy 20 January 2015, 08:48:17 UTC ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy address The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is the commit add mdio node with un-correct phy address. The patch just correct i.MX6sx sdb board enet phy address. V2: * As Shawn's suggestion that unit-address should match 'reg' property, so update ethernet-phy unit-address. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2015, 05:54:59 UTC
440e996 Linus Torvalds 24 January 2015, 22:52:30 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi pULL SCSI fixes from James Bottomley: "This consists of four real fixes and three MAINTAINER updates. Three of the fixes are obvious (the DIX and atomic allocation are bug on and warn on fixes and the other is just trivial) and the ipr one is a bit more involved but is required because without it, the card double completes aborted commands and causes a kernel oops" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ibmvscsi driver maintainer change MAINTAINERS: ibmvfc driver maintainer change MAINTAINERS: Remove self as isci maintainer scsi_debug: test always evaluates to false, || should be used instead scsi: Avoid crashing if device uses DIX but adapter does not support it scsi_debug: use atomic allocation in resp_rsup_opcodes ipr: wait for aborted command responses 24 January 2015, 22:52:30 UTC
back to top