https://github.com/torvalds/linux
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.19-rc2
- v5.19-rc1
- v5.18-rc7
- v5.18-rc6
- v5.18-rc5
- v5.18-rc4
- v5.18-rc3
- v5.18-rc2
- v5.18-rc1
- v5.18
- v5.17-rc8
- v5.17-rc7
- v5.17-rc6
- v5.17-rc5
- v5.17-rc4
- v5.17-rc3
- v5.17-rc2
- v5.17-rc1
- v5.17
- v5.16-rc8
- v5.16-rc7
- v5.16-rc6
- v5.16-rc5
- v5.16-rc4
- v5.16-rc3
- v5.16-rc2
- v5.16-rc1
- v5.16
- v5.15-rc7
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.15
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Take a new snapshot of a software origin
If the archived software origin currently browsed is not synchronized with its upstream version (for instance when new commits have been issued), you can explicitly request Software Heritage to take a new snapshot of it.
Use the form below to proceed. Once a request has been submitted and accepted, it will be processed as soon as possible. You can then check its processing state by visiting this dedicated page.![swh spinner](/static/img/swh-spinner.gif)
Processing "take a new snapshot" request ...
Permalinks
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
65112dc | Linus Torvalds | 10 October 2011, 02:53:11 UTC | Merge git://git.samba.org/sfrench/cifs-2.6 * git://git.samba.org/sfrench/cifs-2.6: [CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2 | 10 October 2011, 02:53:11 UTC |
bbf5e97 | Linus Torvalds | 10 October 2011, 02:48:27 UTC | Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-soc * 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: mach-ux500: enable fix for ARM errata 754322 ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init ARM: OMAP: Fix i2c init for twl4030 ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1 | 10 October 2011, 02:48:27 UTC |
3faf12c | Marc Dietrich | 07 October 2011, 15:31:41 UTC | ARM: tegra: fix compilation error due to mach/hardware.h removal This fixes a compilation error in cpu-tegra.c which was introduced in dc8d966bccde ("ARM: convert PCI defines to variables") which removed the now obsolete mach/hardware.h from the mach-tegra subtree. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 October 2011, 02:46:25 UTC |
84c8611 | Linus Torvalds | 10 October 2011, 02:43:06 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1 drm/radeon/kms: fix dp_detect handling for DP bridge chips drm/radeon/kms: retry aux transactions if there are status flags | 10 October 2011, 02:43:06 UTC |
746fb63 | Olof Johansson | 07 October 2011, 20:27:48 UTC | MAINTAINERS: Update tegra maintainer information A couple of changes to the Tegra maintainership setup: I'm very glad to bring on Stephen Warren on board as a maintainer. The work he has done so far is excellent, and the fact that he works for Nvidia means he has long-term interest in the platform. Erik Gilling did an astounding amount of work on getting things up and running but has been a silent partner on the maintainership side for a while, and is stepping down. Thanks for your contributions so far, Erik. Finally, update the git URL since I'll take over running the main repo for a while. Overall maintainership model isn't changing much at this time: We'll all three review patches as appropriate, and one of us will collect the main repo (me at this time). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Erik Gilling <konkers@android.com> Acked-by: Colin Cross <ccross@android.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 October 2011, 02:42:22 UTC |
a24d025 | Linus Torvalds | 10 October 2011, 02:39:03 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits) MIPS: Call oops_enter, oops_exit in die staging/octeon: Software should check the checksum of no tcp/udp packets MIPS: Octeon: Enable C0_UserLocal probing. MIPS: No branches in delay slots for huge pages in handle_tlbl MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) MIPS: Compat: Use 32-bit wrapper for compat_sys_futex. MIPS: Do not use EXTRA_CFLAGS MIPS: Alchemy: DB1200: Disable cascade IRQ in handler SERIAL: Lantiq: Set timeout in uart_port MIPS: Lantiq: Fix setting the PCI bus speed on AR9 MIPS: Lantiq: Fix external interrupt sources MIPS: tlbex: Fix build error in R3000 code. MIPS: Alchemy: Include Au1100 in PM code. MIPS: Alchemy: Fix typo in MAC0 registration MIPS: MSP71xx: Fix build error. MIPS: Handle __put_user() sleeping. MIPS: Allow forced irq threading MIPS: i8259: Mark cascade interrupt non-threaded ... | 10 October 2011, 02:39:03 UTC |
aab3a70 | Arnd Bergmann | 08 October 2011, 20:21:07 UTC | Merge branch 'omap/fixes-for-3.1' into fixes | 08 October 2011, 20:21:07 UTC |
9d1e397 | Steve French | 07 October 2011, 04:14:07 UTC | [CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2 Microsoft has a bug with ntlmv2 that requires use of ntlmssp, but we didn't get the required information on when/how to use ntlmssp to old (but once very popular) legacy servers (various NT4 fixpacks for example) until too late to merge for 3.1. Will upgrade to NTLMv2 in NTLMSSP in 3.2 Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> | 08 October 2011, 01:17:56 UTC |
98e87d5 | srinidhi kasagar | 20 September 2011, 05:45:46 UTC | ARM: mach-ux500: enable fix for ARM errata 754322 This applies ARM errata fix 754322 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 07 October 2011, 15:38:35 UTC |
3ee72ca | Linus Torvalds | 06 October 2011, 23:15:10 UTC | Merge git://github.com/davem330/net * git://github.com/davem330/net: net: fix typos in Documentation/networking/scaling.txt bridge: leave carrier on for empty bridge netfilter: Use proper rwlock init function tcp: properly update lost_cnt_hint during shifting tcp: properly handle md5sig_pool references macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode | 06 October 2011, 23:15:10 UTC |
29cf7a3 | Paul Menzel | 31 August 2011, 15:07:10 UTC | x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE In summary, this DMI quirk uses the _CRS info by default for the ASUS M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN") whose commit message should be read for further information. Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res") Linux gives the following oops: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:20:01.0: setting latency timer to 64 BUG: unable to handle kernel paging request at ffffc90011c08000 IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173 Oops: 0009 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstate CPU 0 Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan] Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name RIP: 0010:[<ffffffffa0578402>] [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP: 0018:ffff88013153fe50 EFLAGS: 00010286 RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090 FS: 0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0) Stack: 0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400 ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8 ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232 Call Trace: [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186 [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92 [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b [<ffffffff8105fd3f>] ? kthread+0x7a/0x82 [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10 [<ffffffff8105fcc5>] ? kthread+0x0/0x82 [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10 Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be RIP [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP <ffff88013153fe50> CR2: ffffc90011c08000 ---[ end trace 8d1f3ebc136437fd ]--- Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem. $ dmesg | grep -i crs # with the quirk PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug The match has to be against the DMI board entries though since the vendor entries are not populated. DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304 10/30/2007 This quirk should be removed when `pci=use_crs` is enabled for machines from 2006 or earlier or some other solution is implemented. Using coreboot [1] with this board the problem does not exist but this quirk also does not affect it either. To be safe though the check is tightened to only take effect when the BIOS from American Megatrends is used. 15:13 < ruik> but coreboot does not need that 15:13 < ruik> because i have there only one root bus 15:13 < ruik> the audio is behind a bridge $ sudo dmidecode BIOS Information Vendor: American Megatrends Inc. Version: 0304 Release Date: 10/30/2007 [1] http://www.coreboot.org/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552 Cc: stable@kernel.org (2.6.34) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 October 2011, 23:10:37 UTC |
186c6bb | Benjamin Poirier | 04 October 2011, 04:00:30 UTC | net: fix typos in Documentation/networking/scaling.txt The second hunk fixes rps_sock_flow_table but has to re-wrap the paragraph. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2011, 19:58:24 UTC |
b64b73d | stephen hemminger | 03 October 2011, 18:14:45 UTC | bridge: leave carrier on for empty bridge This resolves a regression seen by some users of bridging. Some users use the bridge like a dummy device. They expect to be able to put an IPv6 address on the device with no ports attached. Although there are better ways of doing this, there is no reason to not allow it. Note: the bridge still will reflect the state of ports in the bridge if there are any added. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2011, 19:26:50 UTC |
6367f17 | Linus Torvalds | 06 October 2011, 15:31:47 UTC | Merge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dm * 'for-linus' of http://people.redhat.com/agk/git/linux-dm: dm crypt: always disable discard_zeroes_data dm: raid fix write_mostly arg validation dm table: avoid crash if integrity profile changes dm: flakey fix corrupt_bio_byte error path | 06 October 2011, 15:31:47 UTC |
a7c56eb | Linus Torvalds | 06 October 2011, 15:30:03 UTC | Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: Avoid waking up a thread after it has been freed. | 06 October 2011, 15:30:03 UTC |
cb7cf41 | Alex Deucher | 05 October 2011, 22:36:50 UTC | drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1 The encoders are supposedly fully routeable, but changing the mapping doesn't always seem to take. Using a hardcoded mapping is much more reliable. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41366 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 06 October 2011, 10:45:30 UTC |
3458e21 | Thomas Gleixner | 05 October 2011, 03:24:43 UTC | netfilter: Use proper rwlock init function Replace the open coded initialization with the init function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 October 2011, 21:51:38 UTC |
538d288 | Linus Torvalds | 05 October 2011, 16:22:38 UTC | Merge branch 'for-linus' of git://github.com/dtor/input * 'for-linus' of git://github.com/dtor/input: Input: wacom - revert "Cintiq 21UX2 does not have menu strips" | 05 October 2011, 16:22:38 UTC |
71277a6 | Linus Torvalds | 05 October 2011, 16:16:11 UTC | Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6 * git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: [SCSI] libsas: fix panic when single phy is disabled on a wide port [SCSI] qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload | 05 October 2011, 16:16:11 UTC |
6777a4f | Alex Deucher | 04 October 2011, 16:23:24 UTC | drm/radeon/kms: fix dp_detect handling for DP bridge chips The HPD pin is not reliable for detecting whether a monitor is connected or not. Skip HPD and just use DDC or load detection. Fixes phantom VGA connected bugs. [Michel: fixes phantom VGA bugs on his llano system.] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 05 October 2011, 09:31:40 UTC |
4f33284 | Alex Deucher | 04 October 2011, 21:23:15 UTC | drm/radeon/kms: retry aux transactions if there are status flags If there are error flags in the aux status, retry the transaction. This makes aux much more reliable, especially on llano systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 05 October 2011, 09:30:50 UTC |
d6069da | Jason Gerecke | 05 October 2011, 05:50:45 UTC | Input: wacom - revert "Cintiq 21UX2 does not have menu strips" This reverts commit 71c86ce59791bcd67af937bbea719a508079d7c2. The 21UX2 does have touchstrips, but they are in a somewhat- hidden location. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 05 October 2011, 05:54:05 UTC |
1e5289e | Yan, Zheng | 02 October 2011, 04:21:50 UTC | tcp: properly update lost_cnt_hint during shifting lost_skb_hint is used by tcp_mark_head_lost() to mark the first unhandled skb. lost_cnt_hint is the number of packets or sacked packets before the lost_skb_hint; When shifting a skb that is before the lost_skb_hint, if tcp_is_fack() is ture, the skb has already been counted in the lost_cnt_hint; if tcp_is_fack() is false, tcp_sacktag_one() will increase the lost_cnt_hint. So tcp_shifted_skb() does not need to adjust the lost_cnt_hint by itself. When shifting a skb that is equal to lost_skb_hint, the shifted packets will not be counted by tcp_mark_head_lost(). So tcp_shifted_skb() should adjust the lost_cnt_hint even tcp_is_fack(tp) is true. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 October 2011, 03:31:24 UTC |
260fcbe | Yan, Zheng | 29 September 2011, 17:10:10 UTC | tcp: properly handle md5sig_pool references tcp_v4_clear_md5_list() assumes that multiple tcp md5sig peers only hold one reference to md5sig_pool. but tcp_v4_md5_do_add() increases use count of md5sig_pool for each peer. This patch makes tcp_v4_md5_do_add() only increases use count for the first tcp md5sig peer. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 October 2011, 03:31:24 UTC |
cb2d0f3 | David Ward | 18 September 2011, 12:53:20 UTC | macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode Packets should always be forwarded to the lowerdev using dev_forward_skb. vlan->forward is for packets being forwarded directly to another macvlan/ macvtap device (used for multicast in bridge mode). Reported-and-tested-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 October 2011, 03:31:23 UTC |
976d167 | Linus Torvalds | 05 October 2011, 01:11:50 UTC | Linux 3.1-rc9 | 05 October 2011, 01:11:50 UTC |
8a04b45 | Linus Torvalds | 04 October 2011, 17:37:06 UTC | Merge git://github.com/davem330/net * git://github.com/davem330/net: pch_gbe: Fixed the issue on which a network freezes pch_gbe: Fixed the issue on which PC was frozen when link was downed. make PACKET_STATISTICS getsockopt report consistently between ring and non-ring net: xen-netback: correctly restart Tx after a VM restore/migrate bonding: properly stop queuing work when requested can bcm: fix incomplete tx_setup fix RDSRDMA: Fix cleanup of rds_iw_mr_pool net: Documentation: Fix type of variables ibmveth: Fix oops on request_irq failure ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket cxgb4: Fix EEH on IBM P7IOC can bcm: fix tx_setup off-by-one errors MAINTAINERS: tehuti: Alexander Indenbaum's address bounces dp83640: reduce driver noise ptp: fix L2 event message recognition | 04 October 2011, 17:37:06 UTC |
a8062e4 | Linus Torvalds | 04 October 2011, 16:59:22 UTC | Merge branch 'fix/asoc' of git://github.com/tiwai/sound * 'fix/asoc' of git://github.com/tiwai/sound: ASoC: omap_mcpdm_remove cannot be __devexit ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC ASoC: use a valid device for dev_err() in Zylonite | 04 October 2011, 16:59:22 UTC |
1fd2a85 | Linus Torvalds | 04 October 2011, 16:54:18 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix channel_remap setup (v2) drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. drm/radeon: Simplify cursor x/yorigin calculation. drm/radeon/kms: fix cursor image off-by-one error drm/radeon/kms: Fix logic error in DP HPD handler drm/radeon/kms: add retry limits for native DP aux defer drm/radeon/kms: fix regression in DP aux defer handling | 04 October 2011, 16:54:18 UTC |
f8451c3 | Linus Torvalds | 04 October 2011, 16:52:56 UTC | Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6 * 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: Fix overrun issue spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs spi-topcliff-pch: Fix CPU read complete condition issue spi-topcliff-pch: Fix SSN Control issue spi-topcliff-pch: add tx-memory clear after complete transmitting | 04 October 2011, 16:52:56 UTC |
5f39e67 | Jon Mason | 03 October 2011, 14:50:20 UTC | PCI: Disable MPS configuration by default Add the ability to disable PCI-E MPS turning and using the BIOS configured MPS defaults. Due to the number of issues recently discovered on some x86 chipsets, make this the default behavior. Also, add the option for peer to peer DMA MPS configuration. Peer to peer DMA is outside the scope of this patch, but MPS configuration could prevent it from working by having the MPS on one root port different than the MPS on another. To work around this, simply make the system wide MPS the smallest possible value (128B). Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 October 2011, 16:52:28 UTC |
12d5180 | Alex Deucher | 04 October 2011, 14:46:34 UTC | drm/radeon/kms: fix channel_remap setup (v2) Most asics just use the hw default value which requires no explicit programming. For those that need a different value, the vbios will program it properly. As such, there's no need to program these registers explicitly in the driver. Changing MC_SHARED_CHREMAP requires a reload of all data in vram otherwise its contents will be scambled. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=40103 v2: drop now unused channel_remap functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 October 2011, 16:24:14 UTC |
f3e03e2 | Tomoya MORINAGA | 06 September 2011, 08:16:38 UTC | spi-topcliff-pch: Fix overrun issue We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 04 October 2011, 16:10:50 UTC |
25e803f | Tomoya MORINAGA | 06 September 2011, 08:16:37 UTC | spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs Add recovery processing in case FIFO overrun error occurs with DMA transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 04 October 2011, 16:10:50 UTC |
373b0eb | Tomoya MORINAGA | 06 September 2011, 08:16:36 UTC | spi-topcliff-pch: Fix CPU read complete condition issue We found Rx data sometimes drops.(with non-DMA transfer mode) The cause is read complete condition is not true. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 04 October 2011, 16:10:50 UTC |
8b7aa96 | Tomoya MORINAGA | 06 September 2011, 08:16:35 UTC | spi-topcliff-pch: Fix SSN Control issue During processing 1 command/data series, SSN should keep LOW. However, currently, SSN becomes HIGH. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 04 October 2011, 16:10:50 UTC |
27504be | Tomoya MORINAGA | 06 September 2011, 08:16:34 UTC | spi-topcliff-pch: add tx-memory clear after complete transmitting Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 04 October 2011, 16:10:50 UTC |
05faadc | Takashi Iwai | 04 October 2011, 01:09:14 UTC | lis3: fix regression of HP DriveGuard with 8bit chip Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems clearing the BIOS setup, and no proper interrupt for DriveGuard will be triggered any more. Since the init code there is basically only for embedded devices, put a pdata check so that the problematic initialization will be skipped for hp_accel stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 October 2011, 03:51:51 UTC |
0f86267 | Linus Torvalds | 03 October 2011, 19:54:56 UTC | Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux * 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) Avoid leaving around dangling pointer hwmon: (coretemp) Fixup platform device ID change | 03 October 2011, 19:54:56 UTC |
0d61792 | Linus Torvalds | 03 October 2011, 19:53:43 UTC | Merge git://github.com/davem330/ide * git://github.com/davem330/ide: ide-disk: Fix request requeuing | 03 October 2011, 19:53:43 UTC |
7fd21be | Linus Torvalds | 03 October 2011, 19:17:44 UTC | Merge branch 'btrfs-3.0' of git://github.com/chrismason/linux * 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: force a page fault if we have a shorty copy on a page boundary | 03 October 2011, 19:17:44 UTC |
2c8fc86 | Borislav Petkov | 03 October 2011, 18:28:18 UTC | ide-disk: Fix request requeuing Simon Kirby reported that on his RAID setup with idedisk underneath the box OOMs after a couple of days of runtime. Running with CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally allocates an ide_cmd struct. However, ide_requeue_and_plug() can be called more than once per request, either from the request issue or the IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn() repeatedly, allocating a struct ide_cmd everytime and "forgetting" the previous pointer. Make sure the code reuses the old allocated chunk. Reported-and-tested-by: Simon Kirby <sim@hostway.ca> Cc: <stable@kernel.org> [ 39.x, 3.0.x ] Link: http://marc.info/?l=linux-kernel&m=131667641517919 Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca Signed-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 October 2011, 18:28:18 UTC |
805e969 | Toshiharu Okada | 25 September 2011, 21:27:43 UTC | pch_gbe: Fixed the issue on which a network freezes The pch_gbe driver has an issue which a network stops, when receiving traffic is high. In the case, The link down and up are necessary to return a network. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 October 2011, 18:20:39 UTC |
5f3a114 | Toshiharu Okada | 25 September 2011, 21:27:42 UTC | pch_gbe: Fixed the issue on which PC was frozen when link was downed. When a link was downed during network use, there is an issue on which PC freezes. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 October 2011, 18:20:39 UTC |
7091fbd | Willem de Bruijn | 30 September 2011, 10:38:28 UTC | make PACKET_STATISTICS getsockopt report consistently between ring and non-ring This is a minor change. Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, ...) would return total and dropped packets since its last invocation. The introduction of socket queue overflow reporting [1] changed drop rate calculation in the normal packet socket path, but not when using a packet ring. As a result, the getsockopt now returns different statistics depending on the reception method used. With a ring, it still returns the count since the last call, as counts are incremented in tpacket_rcv and reset in getsockopt. Without a ring, it returns 0 if no drops occurred since the last getsockopt and the total drops over the lifespan of the socket otherwise. The culprit is this line in packet_rcv, executed on a drop: drop_n_acct: po->stats.tp_drops = atomic_inc_return(&sk->sk_drops); As it shows, the new drop number it taken from the socket drop counter, which is not reset at getsockopt. I put together a small example that demonstrates the issue [2]. It runs for 10 seconds and overflows the queue/ring on every odd second. The reported drop rates are: ring: 16, 0, 16, 0, 16, ... non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74. Note how the even ring counts monotonically increase. Because the getsockopt adds tp_drops to tp_packets, total counts are similarly reported cumulatively. Long story short, reinstating the original code, as the below patch does, fixes the issue at the cost of additional per-packet cycles. Another solution that does not introduce per-packet overhead is be to keep the current data path, record the value of sk_drops at getsockopt() at call N in a new field in struct packetsock and subtract that when reporting at call N+1. I'll be happy to code that, instead, it's just more messy. [1] http://patchwork.ozlabs.org/patch/35665/ [2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 October 2011, 18:18:26 UTC |
d0e5d83 | David Vrabel | 30 September 2011, 06:37:51 UTC | net: xen-netback: correctly restart Tx after a VM restore/migrate If a VM is saved and restored (or migrated) the netback driver will no longer process any Tx packets from the frontend. xenvif_up() does not schedule the processing of any pending Tx requests from the front end because the carrier is off. Without this initial kick the frontend just adds Tx requests to the ring without raising an event (until the ring is full). This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net: xen-netback: convert to hw_features) which reordered the calls to xenvif_up() and netif_carrier_on() in xenvif_connect(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 October 2011, 18:15:46 UTC |
a0db2da | Andy Gospodarek | 23 September 2011, 10:53:34 UTC | bonding: properly stop queuing work when requested During a test where a pair of bonding interfaces using ARP monitoring were both brought up and torn down (with an rmmod) repeatedly, a panic in the timer code was noticed. I tracked this down and determined that any of the bonding functions that ran as workqueue handlers and requeued more work might not properly exit when the module was removed. There was a flag protected by the bond lock called kill_timers that is set when the interface goes down or the module is removed, but many of the functions that monitor link status now unlock the bond lock to take rtnl first. There is a chance that another CPU running the rmmod could get the lock and set kill_timers after the first check has passed. This patch does not allow any function to queue work that will make itself run unless kill_timers is not set. I also noticed while doing this work that bond_resend_igmp_join_requests did not have a check for kill_timers, so I added the needed call there as well. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Liang Zheng <lzheng@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 October 2011, 17:48:20 UTC |
02e6859 | Michel Dänzer | 30 September 2011, 15:16:53 UTC | drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. Apart from the obvious cleanup, this should make the line cursor_end = x - xorigin + w; correct now. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:37 UTC |
b8aee29 | Michel Dänzer | 30 September 2011, 15:16:52 UTC | drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. Fixes cursor disappearing prematurely when moving off a top/left edge which is not located at the desktop top/left edge. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:36 UTC |
7d30952 | Michel Dänzer | 30 September 2011, 15:16:51 UTC | drm/radeon: Simplify cursor x/yorigin calculation. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:35 UTC |
b356fe0 | Nicholas Miell | 30 September 2011, 02:07:14 UTC | drm/radeon/kms: fix cursor image off-by-one error The mouse cursor hotspot calculation when the cursor is partially off the top or left side of the screen was off by one. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158 Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:33 UTC |
5ba7ddf | Alex Deucher | 03 October 2011, 12:37:33 UTC | drm/radeon/kms: Fix logic error in DP HPD handler Only disable the pipe if the monitor is physically disconnected. The previous logic also disabled the pipe if the link was trained. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41248 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:32 UTC |
6375bda | Alex Deucher | 03 October 2011, 13:13:46 UTC | drm/radeon/kms: add retry limits for native DP aux defer The previous code could potentially loop forever. Limit the number of DP aux defer retries to 4 for native aux transactions, same as i2c over aux transactions. Noticed by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <lists2009@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:31 UTC |
109bc10 | Alex Deucher | 03 October 2011, 13:13:45 UTC | drm/radeon/kms: fix regression in DP aux defer handling An incorrect ordering in the error checking code lead to DP aux defer being skipped in the aux native write path. Move the bytes transferred check (ret == 0) below the defer check. Tracked down by: Brad Campbell <brad@fnarfbargle.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41121 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <brad@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 October 2011, 17:37:30 UTC |
9b13776 | Linus Torvalds | 03 October 2011, 02:23:44 UTC | Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6 * 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6: mfd: Fix generic irq chip ack function name for jz4740-adc | 03 October 2011, 02:23:44 UTC |
4edf588 | Linus Torvalds | 03 October 2011, 02:22:44 UTC | Merge branch 'for-linus' of git://github.com/tiwai/sound * 'for-linus' of git://github.com/tiwai/sound: ALSA: hda - Fix a regression of the position-buffer check | 03 October 2011, 02:22:44 UTC |
b5c49d4 | Arnd Bergmann | 02 October 2011, 14:45:31 UTC | ASoC: omap_mcpdm_remove cannot be __devexit omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 02 October 2011, 19:19:59 UTC |
21d17dd | Axel Lin | 02 October 2011, 12:41:04 UTC | ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 02 October 2011, 18:55:48 UTC |
a73914c | Mark Salyzyn | 22 September 2011, 15:32:23 UTC | [SCSI] libsas: fix panic when single phy is disabled on a wide port When a wide port is being utilized to a target, if one disables only one of the phys, we get an OS crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000238 IP: [<ffffffff814ca9b1>] mutex_lock+0x21/0x50 PGD 4103f5067 PUD 41dba9067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/bus/pci/slots/5/address CPU 0 Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4 ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3 jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001] Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4 ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3 jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001] Pid: 5146, comm: scsi_wq_5 Not tainted 2.6.32-71.29.1.el6.lustre.7.x86_64 #1 Storage Server RIP: 0010:[<ffffffff814ca9b1>] [<ffffffff814ca9b1>] mutex_lock+0x21/0x50 RSP: 0018:ffff8803e4e33d30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000238 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8803e664c800 RDI: 0000000000000238 RBP: ffff8803e4e33d40 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000238 R14: ffff88041acb7200 R15: ffff88041c51ada0 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000238 CR3: 0000000410143000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_wq_5 (pid: 5146, threadinfo ffff8803e4e32000, task ffff8803e4e294a0) Stack: ffff8803e664c800 0000000000000000 ffff8803e4e33d70 ffffffffa001f06e <0> ffff8803e4e33d60 ffff88041c51ada0 ffff88041acb7200 ffff88041bc0aa00 <0> ffff8803e4e33d90 ffffffffa0032b6c 0000000000000014 ffff88041acb7200 Call Trace: [<ffffffffa001f06e>] sas_port_delete_phy+0x2e/0xa0 [scsi_transport_sas] [<ffffffffa0032b6c>] sas_unregister_devs_sas_addr+0xac/0xe0 [libsas] [<ffffffffa0034914>] sas_ex_revalidate_domain+0x204/0x330 [libsas] [<ffffffffa00307f0>] ? sas_revalidate_domain+0x0/0x90 [libsas] [<ffffffffa0030855>] sas_revalidate_domain+0x65/0x90 [libsas] [<ffffffff8108c7d0>] worker_thread+0x170/0x2a0 [<ffffffff81091ea0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8108c660>] ? worker_thread+0x0/0x2a0 [<ffffffff81091b36>] kthread+0x96/0xa0 [<ffffffff810141ca>] child_rip+0xa/0x20 [<ffffffff81091aa0>] ? kthread+0x0/0xa0 [<ffffffff810141c0>] ? child_rip+0x0/0x20 Code: ff ff 85 c0 75 ed eb d6 66 90 55 48 89 e5 48 83 ec 10 48 89 1c 24 4c 89 64 24 08 0f 1f 44 00 00 48 89 fb e8 92 f4 ff ff 48 89 df <f0> ff 0f 79 05 e8 25 00 00 00 65 48 8b 04 25 08 cc 00 00 48 2d RIP [<ffffffff814ca9b1>] mutex_lock+0x21/0x50 RSP <ffff8803e4e33d30> CR2: 0000000000000238 The following patch is admittedly a band-aid, and does not solve the root cause, but it still is a good candidate for hardening as a pointer check before reference. Signed-off-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Tested-by: Jack Wang <jack_wang@usish.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 02 October 2011, 18:28:55 UTC |
eff919a | Arnd Bergmann | 01 October 2011, 20:03:34 UTC | ASoC: use a valid device for dev_err() in Zylonite A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 02 October 2011, 18:16:52 UTC |
9bfacd0 | Roland Dreier | 22 September 2011, 07:06:05 UTC | [SCSI] qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload I hit a crash in qla2x00_abort_all_cmds() if the qla2xxx module is unloaded right after it is loaded. I debugged this down to the abort handling improperly treating a command of type SRB_ADISC_CMD as if it had a bsg_job to complete when that command actually uses the iocb_cmd part of the union. (I guess to hit this one has to unload the module while the async FC initialization is still in progress) It seems we should only look for a bsg_job if type is SRB_ELS_CMD_RPT, SRB_ELS_CMD_HST or SRB_CT_CMD, so switch the test to make that explicit. Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com> | 02 October 2011, 16:58:30 UTC |
2e51818 | Linus Torvalds | 02 October 2011, 00:46:13 UTC | Merge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip * 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: perf tools: Fix raw sample reading | 02 October 2011, 00:46:13 UTC |
8742cd2 | Nathan Lynch | 30 September 2011, 18:49:35 UTC | MIPS: Call oops_enter, oops_exit in die This allows pause_on_oops and mtdoops to work. Signed-off-by: Nathan Lynch <ntl@pobox.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 01 October 2011, 19:36:04 UTC |
f72a209 | Linus Torvalds | 01 October 2011, 15:37:25 UTC | Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip * 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: irq: Fix check for already initialized irq_domain in irq_domain_add irq: Add declaration of irq_domain_simple_ops to irqdomain.h * 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86/rtc: Don't recursively acquire rtc_lock * 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: posix-cpu-timers: Cure SMP wobbles sched: Fix up wchan borkage sched/rt: Migrate equal priority tasks to available CPUs | 01 October 2011, 15:37:25 UTC |
b631642 | Josef Bacik | 30 September 2011, 19:23:54 UTC | Btrfs: force a page fault if we have a shorty copy on a page boundary A user reported a problem where ceph was getting into 100% cpu usage while doing some writing. It turns out it's because we were doing a short write on a not uptodate page, which means we'd fall back at one page at a time and fault the page in. The problem is our position is on the page boundary, so our fault in logic wasn't actually reading the page, so we'd just spin forever or until the page got read in by somebody else. This will force a readpage if we end up doing a short copy. Alexandre could reproduce this easily with ceph and reports it fixes his problem. I also wrote a reproducer that no longer hangs my box with this patch. Thanks, Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 30 September 2011, 19:23:54 UTC |
9d3ec7a | Ingo Molnar | 30 September 2011, 18:08:56 UTC | Merge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent | 30 September 2011, 18:08:56 UTC |
b8e111a | Axel Lin | 30 September 2011, 18:05:55 UTC | ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init Current code calls omap4430_phy_init() twice in usb_musb_init(). Calling omap4430_phy_init() once is enough. This patch removes the first omap4430_phy_init() call, which using an uninitialized pointer as parameter. This patch elimates below build warning: arch/arm/mach-omap2/usb-musb.c: In function 'usb_musb_init': arch/arm/mach-omap2/usb-musb.c:141: warning: 'dev' may be used uninitialized in this function Signed-off-by: Axel Lin <axel.lin@gmail.com> Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 30 September 2011, 18:05:55 UTC |
bfd46a5 | Tony Lindgren | 30 September 2011, 18:05:55 UTC | ARM: OMAP: Fix i2c init for twl4030 Looks like 2600 kHz rate does not work reliably on 2430, so just use the 100 kHz rate. Otherwise the system often fails to boot properly with: omap_i2c omap_i2c.2: timeout waiting for bus ready omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages twl: clock init err [-110] omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages TWL4030 Unable to unlock IDCODE registers --110 Signed-off-by: Tony Lindgren <tony@atomide.com> | 30 September 2011, 18:05:55 UTC |
3696d30 | Bryan Buckley | 30 September 2011, 18:05:55 UTC | ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1 Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley <bryan.buckley@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 30 September 2011, 18:05:55 UTC |
d670ec1 | Peter Zijlstra | 01 September 2011, 10:42:04 UTC | posix-cpu-timers: Cure SMP wobbles David reported: Attached below is a watered-down version of rt/tst-cpuclock2.c from GLIBC. Just build it with "gcc -o test test.c -lpthread -lrt" or similar. Run it several times, and you will see cases where the main thread will measure a process clock difference before and after the nanosleep which is smaller than the cpu-burner thread's individual thread clock difference. This doesn't make any sense since the cpu-burner thread is part of the top-level process's thread group. I've reproduced this on both x86-64 and sparc64 (using both 32-bit and 64-bit binaries). For example: [davem@boricha build-x86_64-linux]$ ./test process: before(0.001221967) after(0.498624371) diff(497402404) thread: before(0.000081692) after(0.498316431) diff(498234739) self: before(0.001223521) after(0.001240219) diff(16698) [davem@boricha build-x86_64-linux]$ The diff of 'process' should always be >= the diff of 'thread'. I make sure to wrap the 'thread' clock measurements the most tightly around the nanosleep() call, and that the 'process' clock measurements are the outer-most ones. --- #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <time.h> #include <fcntl.h> #include <string.h> #include <errno.h> #include <pthread.h> static pthread_barrier_t barrier; static void *chew_cpu(void *arg) { pthread_barrier_wait(&barrier); while (1) __asm__ __volatile__("" : : : "memory"); return NULL; } int main(void) { clockid_t process_clock, my_thread_clock, th_clock; struct timespec process_before, process_after; struct timespec me_before, me_after; struct timespec th_before, th_after; struct timespec sleeptime; unsigned long diff; pthread_t th; int err; err = clock_getcpuclockid(0, &process_clock); if (err) return 1; err = pthread_getcpuclockid(pthread_self(), &my_thread_clock); if (err) return 1; pthread_barrier_init(&barrier, NULL, 2); err = pthread_create(&th, NULL, chew_cpu, NULL); if (err) return 1; err = pthread_getcpuclockid(th, &th_clock); if (err) return 1; pthread_barrier_wait(&barrier); err = clock_gettime(process_clock, &process_before); if (err) return 1; err = clock_gettime(my_thread_clock, &me_before); if (err) return 1; err = clock_gettime(th_clock, &th_before); if (err) return 1; sleeptime.tv_sec = 0; sleeptime.tv_nsec = 500000000; nanosleep(&sleeptime, NULL); err = clock_gettime(th_clock, &th_after); if (err) return 1; err = clock_gettime(my_thread_clock, &me_after); if (err) return 1; err = clock_gettime(process_clock, &process_after); if (err) return 1; diff = process_after.tv_nsec - process_before.tv_nsec; printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n", process_before.tv_sec, process_before.tv_nsec, process_after.tv_sec, process_after.tv_nsec, diff); diff = th_after.tv_nsec - th_before.tv_nsec; printf("thread: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n", th_before.tv_sec, th_before.tv_nsec, th_after.tv_sec, th_after.tv_nsec, diff); diff = me_after.tv_nsec - me_before.tv_nsec; printf("self: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n", me_before.tv_sec, me_before.tv_nsec, me_after.tv_sec, me_after.tv_nsec, diff); return 0; } This is due to us using p->se.sum_exec_runtime in thread_group_cputime() where we iterate the thread group and sum all data. This does not take time since the last schedule operation (tick or otherwise) into account. We can cure this by using task_sched_runtime() at the cost of having to take locks. This also means we can (and must) do away with thread_group_sched_runtime() since the modified thread_group_cputime() is now more accurate and would deadlock when called from thread_group_sched_runtime(). Aside of that it makes the function safe on 32 bit systems. The old code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a 64bit value and could be changed on another cpu at the same time. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins Tested-by: David Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 30 September 2011, 12:07:06 UTC |
798cb7e | Takashi Iwai | 30 September 2011, 06:52:26 UTC | ALSA: hda - Fix a regression of the position-buffer check The commit a810364a0424c297242c6c66071a42f7675a5568 ALSA: hda - Handle -1 as invalid position, too caused a regression on some machines that require the position-buffer instead of LPIB, e.g. resulting in noises with mic recording with PulseAudio. This patch fixes the detection by delaying the test at the timing as same as 3.0, i.e. doing the position check only when requested in azx_position_ok(). Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 September 2011, 06:57:15 UTC |
47ea91b | Ram Pai | 22 September 2011, 07:48:58 UTC | Resource: fix wrong resource window calculation __find_resource() incorrectly returns a resource window which overlaps an existing allocated window. This happens when the parent's resource-window spans 0x00000000 to 0xffffffff and is entirely allocated to all its children resource-windows. __find_resource() looks for gaps in resource allocation among the children resource windows. When it encounters the last child window it blindly tries the range next to one allocated to the last child. Since the last child's window ends at 0xffffffff the calculation overflows, leading the algorithm to believe that any window in the range 0x0000000 to 0xfffffff is available for allocation. This leads to a conflicting window allocation. Michal Ludvig reported this issue seen on his platform. The following patch fixes the problem and has been verified by Michal. I believe this bug has been there for ages. It got exposed by git commit 2bbc6942273b ("PCI : ability to relocate assigned pci-resources") Signed-off-by: Ram Pai <linuxram@us.ibm.com> Tested-by: Michal Ludvig <mludvig@logix.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 September 2011, 03:04:34 UTC |
92bb062 | Linus Torvalds | 30 September 2011, 02:58:58 UTC | Merge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client * 'for-linus' of git://github.com/NewDreamNetwork/ceph-client: libceph: fix pg_temp mapping update libceph: fix pg_temp mapping calculation libceph: fix linger request requeuing libceph: fix parse options memory leak libceph: initialize ack_stamp to avoid unnecessary connection reset | 30 September 2011, 02:58:58 UTC |
7409b71 | Linus Torvalds | 30 September 2011, 02:29:45 UTC | Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus * 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] omap3isp: Fix build error in ispccdc.c [media] uvcvideo: Fix crash when linking entities [media] v4l: Make sure we hold a reference to the v4l2_device before using it [media] v4l: Fix use-after-free case in v4l2_device_release [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2 | 30 September 2011, 02:29:45 UTC |
0ecdb12 | Linus Torvalds | 30 September 2011, 02:28:26 UTC | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: fix cio_tpi ignoring adapter interrupts [S390] gmap: always up mmap_sem properly [S390] Do not clobber personality flags on exec | 30 September 2011, 02:28:26 UTC |
5fe858b | Linus Torvalds | 30 September 2011, 02:24:33 UTC | Merge git://github.com/davem330/sparc * git://github.com/davem330/sparc: sparc64: Force the execute bit in OpenFirmware's translation entries. sparc: Make '-p' boot option meaningful again. sparc, exec: remove redundant addr_limit assignment sparc64: Future proof Niagara cpu detection. | 30 September 2011, 02:24:33 UTC |
8e8e500 | Linus Torvalds | 30 September 2011, 02:23:30 UTC | Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux * 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915: FBC off for ironlake and older, otherwise on by default drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI drm/i915: Enable dither whenever display bpc < frame buffer bpc | 30 September 2011, 02:23:30 UTC |
16fa42a | Benjamin Herrenschmidt | 29 September 2011, 05:57:01 UTC | powerpc: Fix device-tree matching for Apple U4 bridge Apple Quad G5 has some oddity in it's device-tree which causes the new generic matching code to fail to relate nodes for PCI-E devices below U4 with their respective struct pci_dev. This breaks graphics on those machines among others. This fixes it using a quirk which copies the node pointer from the host bridge for the root complex, which makes the generic code work for the children afterward. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 September 2011, 02:22:40 UTC |
b0f8437 | wangyanqing | 29 September 2011, 07:09:40 UTC | bootup: move 'usermodehelper_enable()' a little earlier Commit d5767c53535a ("bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()") moved 'usermodehelper_enable()' to end of do_basic_setup() to after the initcalls. But then I get failed to let uvesafb work on my computer, and lose the splash boot. So maybe we could start usermodehelper_enable a little early to make some task work that need eary init with the help of user mode. [ I would *really* prefer that initcalls not call into user space - even the real 'init' hasn't been execve'd yet, after all! But for uvesafb it really does look like we don't have much choice. I considered doing this when we mount the root filesystem, but depending on config options that is in multiple places. We could do the usermode helper enable as a rootfs_initcall().. So I'm just using wang yanqing's trivial patch. It's not wonderful, but it's simple and should work. We should revisit this some day, though. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 September 2011, 02:21:01 UTC |
12d0d0d | Oliver Hartkopp | 29 September 2011, 19:33:47 UTC | can bcm: fix incomplete tx_setup fix The commit aabdcb0b553b9c9547b1a506b34d55a764745870 ("can bcm: fix tx_setup off-by-one errors") fixed only a part of the original problem reported by Andre Naujoks. It turned out that the original code needed to be re-ordered to reduce complexity and to finally fix the reported frame counting issues. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 19:33:47 UTC |
8e303f2 | Jiri Olsa | 29 September 2011, 15:05:08 UTC | perf tools: Fix raw sample reading Wrong pointer is being passed for raw data sanity checking, when parsing sample event. This ends up with invalid event and perf record being stuck in __perf_session__process_events function during processing build IDs (process_buildids function). Following command hangs up in my setup: ./perf record -e raw_syscalls:sys_enter ls The fix is to use proper pointer to the raw data instead of the 'u' union. Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 September 2011, 19:29:53 UTC |
f4142cb | David S. Miller | 29 September 2011, 19:18:59 UTC | sparc64: Force the execute bit in OpenFirmware's translation entries. In the OF 'translations' property, the template TTEs in the mappings never specify the executable bit. This is the case even though some of these mappings are for OF's code segment. Therefore, we need to force the execute bit on in every mapping. This problem can only really trigger on Niagara/sun4v machines and the history behind this is a little complicated. Previous to sun4v, the sun4u TTE entries lacked a hardware execute permission bit. So OF didn't have to ever worry about setting anything to handle executable pages. Any valid TTE loaded into the I-TLB would be respected by the chip. But sun4v Niagara chips have a real hardware enforced executable bit in their TTEs. So it has to be set or else the I-TLB throws an instruction access exception with type code 6 (protection violation). We've been extremely fortunate to not get bitten by this in the past. The best I can tell is that the OF's mappings for it's executable code were mapped using permanent locked mappings on sun4v in the past. Therefore, the fact that we didn't have the exec bit set in the OF translations we would use did not matter in practice. Thanks to Greg Onufer for helping me track this down. Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 19:18:59 UTC |
85a6488 | Jonathan Lallinger | 29 September 2011, 07:58:41 UTC | RDSRDMA: Fix cleanup of rds_iw_mr_pool In the rds_iw_mr_pool struct the free_pinned field keeps track of memory pinned by free MRs. While this field is incremented properly upon allocation, it is never decremented upon unmapping. This would cause the rds_rdma module to crash the kernel upon unloading, by triggering the BUG_ON in the rds_iw_destroy_mr_pool function. This change keeps track of the MRs that become unpinned, so that free_pinned can be decremented appropriately. Signed-off-by: Jonathan Lallinger <jonathan@ogc.us> Signed-off-by: Steve Wise <swise@ogc.us> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 18:57:19 UTC |
605b91c | Roy.Li | 28 September 2011, 19:51:54 UTC | net: Documentation: Fix type of variables Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 18:57:19 UTC |
95de86c | Brian King | 28 September 2011, 05:33:43 UTC | ibmveth: Fix oops on request_irq failure If request_irq fails, the ibmveth driver will overwrite the rc and end up returning a successful rc on its open function, resulting in an oops later when a packet gets sent and buffers are not allocated due to the failed open. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:11 UTC |
676a118 | Yan, Zheng | 25 September 2011, 02:21:30 UTC | ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket ipv6_ac_list and ipv6_fl_list from listening socket are inadvertently shared with new socket created for connection. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:10 UTC |
6482aa7 | Divy Le Ray | 24 September 2011, 06:11:31 UTC | cxgb4: Fix EEH on IBM P7IOC Fix EEH recovery on new P Series platform by requesting fundamental reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:10 UTC |
aabdcb0 | Oliver Hartkopp | 23 September 2011, 08:23:47 UTC | can bcm: fix tx_setup off-by-one errors This patch fixes two off-by-one errors that canceled each other out. Checking for the same condition two times in bcm_tx_timeout_tsklet() reduced the count of frames to be sent by one. This did not show up the first time tx_setup is invoked as an additional frame is sent due to TX_ANNONCE. Invoking a second tx_setup on the same item led to a reduced (by 1) number of sent frames. Reported-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:09 UTC |
d3c5217 | Ian Campbell | 21 September 2011, 22:08:26 UTC | MAINTAINERS: tehuti: Alexander Indenbaum's address bounces I got: Generating server: Tehuti.onmicrosoft.com baum@tehutinetworks.net #< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found> #SMTP# Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Alexander Indenbaum <baum@tehutinetworks.net> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:09 UTC |
02715ed | Richard Cochran | 20 September 2011, 01:25:42 UTC | dp83640: reduce driver noise The driver has two warning messages that might be triggered by normal use cases. When they appear, the messages give the impression of a never ending series of errors. This commit changes them to debug messages instead. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:04 UTC |
f75159e | Richard Cochran | 20 September 2011, 01:25:41 UTC | ptp: fix L2 event message recognition The IEEE 1588 standard defines two kinds of messages, event and general messages. Event messages require time stamping, and general do not. When using UDP transport, two separate ports are used for the two message types. The BPF designed to recognize event messages incorrectly classifies L2 general messages as event messages. This commit fixes the issue by extending the filter to check the message type field for L2 PTP packets. Event messages are be distinguished from general messages by testing the "general" bit. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2011, 04:32:03 UTC |
d5767c5 | Linus Torvalds | 28 September 2011, 17:23:44 UTC | bootup: move 'usermodehelper_enable()' to the end of do_basic_setup() Doing it just before starting to call into cpu_idle() made a sick kind of sense only because the original bug we fixed (see commit 288d5abec831: "Boot up with usermodehelper disabled") was about problems with some scheduler data structures not being initialized, and they had better be initialized at that point. But it really didn't make any other conceptual sense, and doing it after the initial "schedule()" call for the idle thread actually opened up a race: what if the main initialization thread did everything without needing to sleep, and got all the way into user land too? Without actually having scheduled back to the idle thread? Now, in normal circumstances that doesn't ever happen, but it looks like Richard Cochran triggered exactly that on his ARM IXP4xx machines: "I have some ARM IXP4xx based machines that use the two on chip MAC ports (aka NPEs). The NPE needs a firmware in order to function. Ever since the following commit [that 288d5abec831 one], it is no longer possible to bring up the interfaces during the init scripts." with a call trace showing an ioctl coming from user space. Richard says: "The init is busybox, and the startup script does mount, syslogd, and then ifup, so that all can go by quickly." The fix is to move the usermodehelper_enable() into the main 'init' thread, and just put it after we've done all our initcalls. By then, everything really should be up, but we've obviously not actually started the user-mode portion of init yet. Reported-and-tested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 September 2011, 17:23:44 UTC |
8adc8b3 | Sage Weil | 28 September 2011, 17:11:04 UTC | libceph: fix pg_temp mapping update The incremental map updates have a record for each pg_temp mapping that is to be add/updated (len > 0) or removed (len == 0). The old code was written as if the updates were a complete enumeration; that was just wrong. Update the code to remove 0-length entries and drop the rbtree traversal. This avoids misdirected (and hung) requests that manifest as server errors like [WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11 Signed-off-by: Sage Weil <sage@newdream.net> | 28 September 2011, 17:13:35 UTC |
782e182 | Sage Weil | 28 September 2011, 17:08:27 UTC | libceph: fix pg_temp mapping calculation We need to apply the modulo pg_num calculation before looking up a pgid in the pg_temp mapping rbtree. This fixes pg_temp mappings, and fixes (some) misdirected requests that result in messages like [WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11 on the server and stall make the client block without getting a reply (at least until the pg_temp mapping goes way, but that can take a long long time). Reorder calc_pg_raw() a bit to make more sense. Signed-off-by: Sage Weil <sage@newdream.net> | 28 September 2011, 17:13:31 UTC |
2ef7b45 | Linus Torvalds | 28 September 2011, 15:39:05 UTC | Merge git://github.com/davem330/net * git://github.com/davem330/net: ipv6-multicast: Fix memory leak in IPv6 multicast. ipv6: check return value for dst_alloc net: check return value for dst_alloc ipv6-multicast: Fix memory leak in input path. bnx2x: add missing break in bnx2x_dcbnl_get_cap bnx2x: fix WOL by enablement PME in config space bnx2x: fix hw attention handling net: fix a typo in Documentation/networking/scaling.txt ath9k: Fix a dma warning/memory leak rtlwifi: rtl8192cu: Fix unitialized struct iwlagn: fix dangling scan request batman-adv: do_bcast has to be true for broadcast packets only cfg80211: Fix validation of AKM suites iwlegacy: do not use interruptible waits iwlegacy: fix command queue timeout ath9k_hw: Fix Rx DMA stuck for AR9003 chips | 28 September 2011, 15:39:05 UTC |
07117e3 | Linus Torvalds | 28 September 2011, 15:23:39 UTC | Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6 * git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: [SCSI] 3w-9xxx: fix iommu_iova leak [SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference [SCSI] scsi: qla4xxx needs libiscsi.o [SCSI] libsas: fix failure to revalidate domain for anything but the first expander child. [SCSI] aacraid: reset should disable MSI interrupt | 28 September 2011, 15:23:39 UTC |
20ecb49 | Guenter Roeck | 24 September 2011, 22:27:04 UTC | hwmon: (coretemp) Avoid leaving around dangling pointer Storing the struct temp_data pointer allocated from create_core_data() when returning an error has the potential of leaving around a pointer to freed memory. Reset it to NULL for error returns. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> | 28 September 2011, 15:19:21 UTC |
0eb9782 | Jean Delvare | 28 September 2011, 15:11:00 UTC | hwmon: (coretemp) Fixup platform device ID change With recent change "hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID", the microcode check is now running on random CPU. Fix that by checking the microcode before creating the platform device rather than at probe time. Also avoid calling TO_PHYS_ID(cpu) twice in the same function, it's expensive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jan Beulich <jbeulich@suse.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> | 28 September 2011, 15:19:20 UTC |
c54a06d | Linus Torvalds | 28 September 2011, 15:03:00 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block * 'for-linus' of git://git.kernel.dk/linux-block: block: Free queue resources at blk_release_queue() | 28 September 2011, 15:03:00 UTC |
e689ec8 | Linus Torvalds | 28 September 2011, 15:01:05 UTC | Merge branch 'writeback-for-linus' of git://github.com/fengguang/linux * 'writeback-for-linus' of git://github.com/fengguang/linux: writeback: show raw dirtied_when in trace writeback_single_inode | 28 September 2011, 15:01:05 UTC |