Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 09:02:56 UTC
sort by:
Revision Author Date Message Commit Date
865e525 Ursula Braun 14 May 2020, 11:45:12 UTC MAINTAINERS: another add of Karsten Graul for S390 networking Complete adding of Karsten as maintainer for all S390 networking parts in the kernel. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 May 2020, 20:12:18 UTC
16bb1b5 Wang Wenhu 14 May 2020, 11:02:22 UTC drivers: ipa: fix typos for ipa_smp2p structure doc Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I recommend it's easier for understanding to make the "ready-interrupt" a bundle for it is a parallel description as "shutdown" which is appended after the slash. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 May 2020, 20:06:55 UTC
b8c1583 Guillaume Nault 14 May 2020, 10:15:39 UTC pppoe: only process PADT targeted at local interfaces We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by: David Balažic <xerces9@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 May 2020, 20:02:50 UTC
fd4a517 Vinod Koul 14 May 2020, 06:28:36 UTC net: stmmac: fix num_por initialization Driver missed initializing num_por which is one of the por values that driver configures to hardware. In order to get these values, add a new structure ethqos_emac_driver_data which holds por and num_por values and populate that in driver probe. Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos") Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 May 2020, 19:48:15 UTC
9de5d23 Heiner Kallweit 12 May 2020, 19:45:53 UTC net: phy: fix aneg restart in phy_ethtool_set_eee phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8338e ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 22:21:59 UTC
99addbe Florian Fainelli 13 May 2020, 15:51:51 UTC net: broadcom: Select BROADCOM_PHY for BCMGENET The GENET controller on the Raspberry Pi 4 (2711) is typically interfaced with an external Broadcom PHY via a RGMII electrical interface. To make sure that delays are properly configured at the PHY side, ensure that we the dedicated Broadcom PHY driver (CONFIG_BROADCOM_PHY) is enabled for this to happen. Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:49:07 UTC
69cad59 David S. Miller 13 May 2020, 19:33:19 UTC Merge branch 'tipc-fixes' Tuong Lien says: ==================== tipc: add some patches This series adds patches to fix some issues in TIPC streaming & service subscription. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:33:19 UTC
88690b1 Tuong Lien 13 May 2020, 12:33:18 UTC tipc: fix failed service subscription deletion When a service subscription is expired or canceled by user, it needs to be deleted from the subscription list, so that new subscriptions can be registered (max = 65535 per net). However, there are two issues in code that can cause such an unused subscription to persist: 1) The 'tipc_conn_delete_sub()' has a loop on the subscription list but it makes a break shortly when the 1st subscription differs from the one specified, so the subscription will not be deleted. 2) In case a subscription is canceled, the code to remove the 'TIPC_SUB_CANCEL' flag from the subscription filter does not work if it is a local subscription (i.e. the little endian isn't involved). So, it will be no matches when looking for the subscription to delete later. The subscription(s) will be removed eventually when the user terminates its topology connection but that could be a long time later. Meanwhile, the number of available subscriptions may be exhausted. This commit fixes the two issues above, so as needed a subscription can be deleted correctly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:33:19 UTC
0771d7d Tuong Lien 13 May 2020, 12:33:17 UTC tipc: fix memory leak in service subscripting Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed. However, there is a race condition as follows resulting in memory leak: receive-work connection send-work | | | sub-1 |<------//-------| | sub-2 |<------//-------| | | |<---------------| evt for sub-x sub-3 |<------//-------| | : : : : : : | /--------| | | | * peer closed | | | | | | | |<-------X-------| evt for sub-y | | |<===============| sub-n |<------/ X shutdown | -> orphan | | That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close. We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references. This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Reported-by: Thang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:33:18 UTC
c726858 Tuong Lien 13 May 2020, 12:33:16 UTC tipc: fix large latency in smart Nagle streaming Currently when a connection is in Nagle mode, we set the 'ack_required' bit in the last sending buffer and wait for the corresponding ACK prior to pushing more data. However, on the receiving side, the ACK is issued only when application really reads the whole data. Even if part of the last buffer is received, we will not do the ACK as required. This might cause an unnecessary delay since the receiver does not always fetch the message as fast as the sender, resulting in a large latency in the user message sending, which is: [one RTT + the receiver processing time]. The commit makes Nagle ACK as soon as possible i.e. when a message with the 'ack_required' arrives in the receiving side's stack even before it is processed or put in the socket receive queue... This way, we can limit the streaming latency to one RTT as committed in Nagle mode. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:33:18 UTC
f3fbc5a David S. Miller 13 May 2020, 19:14:51 UTC Merge branch 's390-fixes' Ursula Braun says: ==================== s390/net: updates 2020-05-13 please apply the fix from Wei Yongjun to netdev's net tree and add Karsten Graul as co-maintainer for drivers/s390/net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:14:51 UTC
be7fa20 Ursula Braun 13 May 2020, 07:42:30 UTC MAINTAINERS: add Karsten Graul as S390 NETWORK DRIVERS maintainer Add Karsten as additional maintainer for drivers/s390/net . One of his focal points is the ism driver. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:14:51 UTC
29b74cb Wei Yongjun 13 May 2020, 07:42:29 UTC s390/ism: fix error return code in ism_probe() Fix to return negative error code -ENOMEM from the smcd_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 19:14:51 UTC
eead1c2 Paolo Abeni 12 May 2020, 12:43:14 UTC netlabel: cope with NULL catmap The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2020, 01:12:40 UTC
24adbc1 Eric Dumazet 12 May 2020, 13:54:30 UTC tcp: fix SO_RCVLOWAT hangs with fat skbs We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100% overhead in tcp_set_rcvlowat() This works well when skb->len/skb->truesize ratio is bigger than 0.5 But if we receive packets with small MSS, we can end up in a situation where not enough bytes are available in the receive queue to satisfy RCVLOWAT setting. As our sk_rcvbuf limit is hit, we send zero windows in ACK packets, preventing remote peer from sending more data. Even autotuning does not help, because it only triggers at the time user process drains the queue. If no EPOLLIN is generated, this can not happen. Note poll() has a similar issue, after commit c7004482e8dc ("tcp: Respect SO_RCVLOWAT in tcp_poll().") Fixes: 03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:49:47 UTC
92db978 Clay McClure 12 May 2020, 10:02:30 UTC net: ethernet: ti: Remove TI_CPTS_MOD workaround My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Tony Lindgren <tony@atomide.com> Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Clay McClure <clay@daemons.net> [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:33:27 UTC
d6718cc David S. Miller 12 May 2020, 19:12:34 UTC Merge branch 'ionic-fixes' Shannon Nelson says: ==================== ionic fixes These are a couple more fixes after more fw-upgrade testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:12:34 UTC
ddc5911 Shannon Nelson 11 May 2020, 21:04:45 UTC ionic: call ionic_port_init after fw-upgrade Since the fw has been re-inited, we need to refresh the port information dma address so we can see fresh port information. Let's call ionic_port_init again, and tweak it to allow for a call to simply refresh the existing dma address. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:12:34 UTC
f20a4d4 Shannon Nelson 11 May 2020, 21:04:44 UTC ionic: leave netdev mac alone after fw-upgrade When running in a bond setup, or some other potential configurations, the netdev mac may have been changed from the default device mac. Since the userland doesn't know about the changes going on under the covers in a fw-upgrade it doesn't know the re-push the mac filter. The driver needs to leave the netdev mac filter alone when rebuilding after the fw-upgrade. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:12:34 UTC
2c864c7 Jacob Keller 11 May 2020, 21:02:15 UTC ptp: fix struct member comment for do_aux_work The do_aux_work callback had documentation in the structure comment which referred to it as "do_work". Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:10:17 UTC
64d950a Christoph Paasch 11 May 2020, 16:24:42 UTC mptcp: Initialize map_seq upon subflow establishment When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on map_seq to indicate how to expand to a 64-bit data-sequence number in expand_seq() when receiving data. For new subflows, this field is not initialized, thus results in an "invalid" mapping being discarded. Fix this by initializing map_seq upon subflow establishment time. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 May 2020, 19:08:22 UTC
1abfb18 David S. Miller 11 May 2020, 21:00:44 UTC Merge branch 'net-ipa-fix-cleanup-after-modem-crash' Alex Elder says: ==================== net: ipa: fix cleanup after modem crash The first patch in this series fixes a bug where the size of a data transfer request was never set, meaning it was 0. The consequence of this was that such a transfer request would never complete if attempted, and led to a hung task timeout. This data transfer is required for cleaning up IPA hardware state when recovering from a modem crash. The code to implement this cleanup is already present, but its use was commented out because it hit the bug described above. So the second patch in this series enables the use of that "tag process" cleanup code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2020, 21:00:44 UTC
2c4bb80 Alex Elder 07 May 2020, 19:14:04 UTC net: ipa: use tag process on modem crash One part of recovering from a modem crash is performing a "tag sequence" of several IPA immediate commands, to clear the hardware pipeline. The sequence ends with a data transfer request on the command endpoint (which is not otherwise done). Unfortunately, attempting to do the data transfer led to a hang, so that request plus two other commands were commented out. The previous commit fixes the bug that was causing that hang. And with that bug fixed we can properly issue the tag sequence when the modem crashes, to return the hardware to a known state. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2020, 21:00:29 UTC
c781e1d Alex Elder 07 May 2020, 19:14:03 UTC net: ipa: set DMA length in gsi_trans_cmd_add() When a command gets added to a transaction for the AP->command channel we set the DMA address of its scatterlist entry, but not its DMA length. Fix this bug. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2020, 21:00:29 UTC
e8a1b0e Luo bin 10 May 2020, 19:01:08 UTC hinic: fix a bug of ndo_stop if some function in ndo_stop interface returns failure because of hardware fault, must go on excuting rest steps rather than return failure directly, otherwise will cause memory leak.And bump the timeout for SET_FUNC_STATE to ensure that cmd won't return failure when hw is busy. Otherwise hw may stomp host memory if we free memory regardless of the return value of SET_FUNC_STATE. Fixes: 51ba902a16e6 ("net-next/hinic: Initialize hw interface") Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 11 May 2020, 03:02:01 UTC
3047211 Florian Fainelli 09 May 2020, 23:45:44 UTC net: dsa: loop: Add module soft dependency There is a soft dependency against dsa_loop_bdinfo.ko which sets up the MDIO device registration, since there are no symbols referenced by dsa_loop.ko, there is no automatic loading of dsa_loop_bdinfo.ko which is needed. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 May 2020, 18:24:20 UTC
090e28b Zefan Li 09 May 2020, 03:32:10 UTC netprio_cgroup: Fix unlimited memory leak of v2 cgroups If systemd is configured to use hybrid mode which enables the use of both cgroup v1 and v2, systemd will create new cgroup on both the default root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach task to the two cgroups. If the task does some network thing then the v2 cgroup can never be freed after the session exited. One of our machines ran into OOM due to this memory leak. In the scenario described above when sk_alloc() is called cgroup_sk_alloc() thought it's in v2 mode, so it stores the cgroup pointer in sk->sk_cgrp_data and increments the cgroup refcnt, but then sock_update_netprioidx() thought it's in v1 mode, so it stores netprioidx value in sk->sk_cgrp_data, so the cgroup refcnt will never be freed. Currently we do the mode switch when someone writes to the ifpriomap cgroup control file. The easiest fix is to also do the switch when a task is attached to a new cgroup. Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Reported-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Zefan Li <lizefan@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 10 May 2020, 03:59:21 UTC
99352c7 Arnd Bergmann 09 May 2020, 12:04:52 UTC net: freescale: select CONFIG_FIXED_PHY where needed I ran into a randconfig build failure with CONFIG_FIXED_PHY=m and CONFIG_GIANFAR=y: x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier' It seems the same thing can happen with dpaa and ucc_geth, so change all three to do an explicit 'select FIXED_PHY'. The fixed-phy driver actually has an alternative stub function that theoretically allows building network drivers when fixed-phy is disabled, but I don't see how that would help here, as the drivers presumably would not work then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 22:47:21 UTC
5764443 Paolo Abeni 08 May 2020, 17:28:34 UTC net: ipv4: really enforce backoff for redirects In commit b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") I missed the fact that a 0 'rate_tokens' will bypass the backoff algorithm. Since rate_tokens is cleared after a redirect silence, and never incremented on redirects, if the host keeps receiving packets requiring redirect it will reply ignoring the backoff. Additionally, the 'rate_last' field will be updated with the cadence of the ingress packet requiring redirect. If that rate is high enough, that will prevent the host from generating any other kind of ICMP messages The check for a zero 'rate_tokens' value was likely a shortcut to avoid the more complex backoff algorithm after a redirect silence period. Address the issue checking for 'n_redirects' instead, which is incremented on successful redirect, and does not interfere with other ICMP replies. Fixes: b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") Reported-and-tested-by: Colin Walters <walters@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 05:52:57 UTC
9302bea Wei Yongjun 08 May 2020, 02:15:19 UTC octeontx2-vf: Fix error return code in otx2vf_probe() Fix to return negative error code -ENOMEM from the alloc failed error handling case instead of 0, as done elsewhere in this function. Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 05:22:13 UTC
db80303 Vincent Minet 07 May 2020, 22:14:22 UTC umh: fix memory leak on execve failure If a UMH process created by fork_usermode_blob() fails to execute, a pair of struct file allocated by umh_pipe_setup() will leak. Under normal conditions, the caller (like bpfilter) needs to manage the lifetime of the UMH and its two pipes. But when fork_usermode_blob() fails, the caller doesn't really have a way to know what needs to be done. It seems better to do the cleanup ourselves in this case. Fixes: 449325b52b7a ("umh: introduce fork_usermode_blob() helper") Signed-off-by: Vincent Minet <v.minet@criteo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 02:06:55 UTC
14d8f74 Jakub Kicinski 09 May 2020, 01:58:39 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2020-05-09 The following pull-request contains BPF updates for your *net* tree. We've added 4 non-merge commits during the last 9 day(s) which contain a total of 4 files changed, 11 insertions(+), 6 deletions(-). The main changes are: 1) Fix msg_pop_data() helper incorrectly setting an sge length in some cases as well as fixing bpf_tcp_ingress() wrongly accounting bytes in sg.size, from John Fastabend. 2) Fix to return an -EFAULT error when copy_to_user() of the value fails in map_lookup_and_delete_elem(), from Wei Yongjun. 3) Fix sk_psock refcnt leak in tcp_bpf_recvmsg(), from Xiyu Yang. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 01:58:39 UTC
6d32a51 Dan Carpenter 08 May 2020, 14:37:20 UTC dpaa2-eth: prevent array underflow in update_cls_rule() The "location" is controlled by the user via the ethtool_set_rxnfc() function. This update_cls_rule() function checks for array overflows but it doesn't check if the value is negative. I have changed the type to unsigned to prevent array underflows. Fixes: afb90dbb5f78 ("dpaa2-eth: Add ethtool support for flow classification") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 01:43:27 UTC
5099dea Wei Yongjun 08 May 2020, 07:27:35 UTC nfp: abm: fix error return code in nfp_abm_vnic_alloc() Fix to return negative error code -ENOMEM from the kzalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 174ab544e3bc ("nfp: abm: add cls_u32 offload for simple band classification") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 01:39:36 UTC
1f8492d Heiner Kallweit 08 May 2020, 06:24:14 UTC r8169: re-establish support for RTL8401 chip version r8169 never had native support for the RTL8401, however it reportedly worked with the fallback to RTL8101e [0]. Therefore let's add this as an explicit assignment. [0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=956868 Fixes: b4cc2dcc9c7c ("r8169: remove default chip versions") Reported-by: Camaleón <noelamac@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 09 May 2020, 01:32:12 UTC
cc4de04 Kelly Littlepage 08 May 2020, 19:58:46 UTC net: tcp: fix rx timestamp behavior for tcp_recvmsg The stated intent of the original commit is to is to "return the timestamp corresponding to the highest sequence number data returned." The current implementation returns the timestamp for the last byte of the last fully read skb, which is not necessarily the last byte in the recv buffer. This patch converts behavior to the original definition, and to the behavior of the previous draft versions of commit 98aaa913b4ed ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") which also match this behavior. Fixes: 98aaa913b4ed ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") Co-developed-by: Iris Liu <iris@onechronos.com> Signed-off-by: Iris Liu <iris@onechronos.com> Signed-off-by: Kelly Littlepage <kelly@onechronos.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 May 2020, 23:09:22 UTC
dd91230 Cong Wang 07 May 2020, 19:19:03 UTC net: fix a potential recursive NETDEV_FEAT_CHANGE syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event between bonding master and slave. I managed to find a reproducer for this: ip li set bond0 up ifenslave bond0 eth0 brctl addbr br0 ethtool -K eth0 lro off brctl addif br0 bond0 ip li set br0 up When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave, it captures this and calls bond_compute_features() to fixup its master's and other slaves' features. However, when syncing with its lower devices by netdev_sync_lower_features() this event is triggered again on slaves when the LRO feature fails to change, so it goes back and forth recursively until the kernel stack is exhausted. Commit 17b85d29e82c intentionally lets __netdev_update_features() return -1 for such a failure case, so we have to just rely on the existing check inside netdev_sync_lower_features() and skip NETDEV_FEAT_CHANGE event only for this specific failure case. Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com Cc: Jarod Wilson <jarod@redhat.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jann Horn <jannh@google.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 May 2020, 01:18:36 UTC
7d14b0d Paolo Abeni 07 May 2020, 16:53:24 UTC mptcp: set correct vfs info for subflows When a subflow is created via mptcp_subflow_create_socket(), a new 'struct socket' is allocated, with a new i_ino value. When inspecting TCP sockets via the procfs and or the diag interface, the above ones are not related to the process owning the MPTCP master socket, even if they are a logical part of it ('ss -p' shows an empty process field) Additionally, subflows created by the path manager get the uid/gid from the running workqueue. Subflows are part of the owning MPTCP master socket, let's adjust the vfs info to reflect this. After this patch, 'ss' correctly displays subflows as belonging to the msk socket creator. Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 May 2020, 01:16:05 UTC
ff8ce31 Chuhong Yuan 07 May 2020, 15:13:20 UTC net: microchip: encx24j600: add missed kthread_stop This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove. Add the missed kthread_stop() to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 May 2020, 01:08:47 UTC
09454fd Maciej Żenczykowski 05 May 2020, 18:57:23 UTC Revert "ipv6: add mtu lock check in __ip6_rt_update_pmtu" This reverts commit 19bda36c4299ce3d7e5bce10bebe01764a655a6d: | ipv6: add mtu lock check in __ip6_rt_update_pmtu | | Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. | It leaded to that mtu lock doesn't really work when receiving the pkt | of ICMPV6_PKT_TOOBIG. | | This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 | did in __ip_rt_update_pmtu. The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work. There's already a comment to this effect elsewhere in the kernel: $ git grep -p -B1 -A3 'RTAX_MTU lock' net/ipv6/route.c=4813= static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg) ... /* In IPv6 pmtu discovery is not optional, so that RTAX_MTU lock cannot disable it. We still use this lock to block changes caused by addrconf/ndisc. */ This reverts to the pre-4.9 behaviour. Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Fixes: 19bda36c4299 ("ipv6: add mtu lock check in __ip6_rt_update_pmtu") Signed-off-by: David S. Miller <davem@davemloft.net> 08 May 2020, 00:29:12 UTC
ee28755 Arnd Bergmann 05 May 2020, 17:22:14 UTC net: bareudp: avoid uninitialized variable warning clang points out that building without IPv6 would lead to returning an uninitialized variable if a packet with family!=AF_INET is passed into bareudp_udp_encap_recv(): drivers/net/bareudp.c:139:6: error: variable 'err' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (family == AF_INET) ^~~~~~~~~~~~~~~~~ drivers/net/bareudp.c:146:15: note: uninitialized use occurs here if (unlikely(err)) { ^~~ include/linux/compiler.h:78:42: note: expanded from macro 'unlikely' # define unlikely(x) __builtin_expect(!!(x), 0) ^ drivers/net/bareudp.c:139:2: note: remove the 'if' if its condition is always true if (family == AF_INET) ^~~~~~~~~~~~~~~~~~~~~~ This cannot happen in practice, so change the condition in a way that gcc sees the IPv4 case as unconditionally true here. For consistency, change all the similar constructs in this file the same way, using "if(IS_ENABLED())" instead of #if IS_ENABLED()". Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 May 2020, 00:28:18 UTC
8aef199 Geert Uytterhoeven 07 May 2020, 11:45:11 UTC net: hisilicon: Make CONFIG_HNS invisible The HNS config symbol enables the framework support for the Hisilicon Network Subsystem. It is already selected by all of its users, so there is no reason to make it visible. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 20:17:55 UTC
1a10186 Oliver Neukum 07 May 2020, 09:49:49 UTC usb: hso: correct debug message If you do not find the OUT endpoint, you should say so, rather than copy the error message for the IN endpoint. Presumably a copy and paste error. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 19:59:33 UTC
64082b6 Maciej Żenczykowski 07 May 2020, 07:58:05 UTC net: remove spurious declaration of tcp_default_init_rwnd() it doesn't actually exist... Test: builds and 'git grep tcp_default_init_rwnd' comes up empty Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 14:58:55 UTC
01c3259 Michael S. Tsirkin 07 May 2020, 07:25:56 UTC virtio_net: fix lockdep warning on 32 bit When we fill up a receive VQ, try_fill_recv currently tries to count kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that uses a seqcount. sequence counts are "lock" constructs where you need to make sure that writers are serialized. In turn, this means that we mustn't run two try_fill_recv concurrently. Which of course we don't. We do run try_fill_recv sometimes from a softirq napi context, and sometimes from a fully preemptible context, but the later always runs with napi disabled. However, when it comes to the seqcount, lockdep is trying to enforce the rule that the same lock isn't accessed from preemptible and softirq context - it doesn't know about napi being enabled/disabled. This causes a false-positive warning: WARNING: inconsistent lock state ... inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. As a work around, shut down the warning by switching to u64_stats_update_begin_irqsave - that works by disabling interrupts on 32 bit only, is a NOP on 64 bit. Reported-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 14:57:21 UTC
a811c1f Linus Torvalds 07 May 2020, 03:53:22 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Fix reference count leaks in various parts of batman-adv, from Xiyu Yang. 2) Update NAT checksum even when it is zero, from Guillaume Nault. 3) sk_psock reference count leak in tls code, also from Xiyu Yang. 4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in fq_codel, from Eric Dumazet. 5) Fix panic in choke_reset(), also from Eric Dumazet. 6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan. 7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet. 8) Fix crash in x25_disconnect(), from Yue Haibing. 9) Don't pass pointer to local variable back to the caller in nf_osf_hdr_ctx_init(), from Arnd Bergmann. 10) Wireguard should use the ECN decap helper functions, from Toke Høiland-Jørgensen. 11) Fix command entry leak in mlx5 driver, from Moshe Shemesh. 12) Fix uninitialized variable access in mptcp's subflow_syn_recv_sock(), from Paolo Abeni. 13) Fix unnecessary out-of-order ingress frame ordering in macsec, from Scott Dial. 14) IPv6 needs to use a global serial number for dst validation just like ipv4, from David Ahern. 15) Fix up PTP_1588_CLOCK deps, from Clay McClure. 16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from Yoshiyuki Kurauchi. 17) Fix a regression in that dsa user port errors should not be fatal, from Florian Fainelli. 18) Fix iomap leak in enetc driver, from Dejin Zheng. 19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang. 20) Initialize protocol value earlier in neigh code paths when generating events, from Roman Mashak. 21) netdev_update_features() must be called with RTNL mutex in macsec driver, from Antoine Tenart. 22) Validate untrusted GSO packets even more strictly, from Willem de Bruijn. 23) Wireguard decrypt worker needs a cond_resched(), from Jason Donenfeld. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning wireguard: send/receive: cond_resched() when processing worker ringbuffers wireguard: socket: remove errant restriction on looping to self wireguard: selftests: use normal kernel stack size on ppc64 net: ethernet: ti: am65-cpsw-nuss: fix irqs type ionic: Use debugfs_create_bool() to export bool net: dsa: Do not leave DSA master with NULL netdev_ops net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred net: stricter validation of untrusted gso packets seg6: fix SRH processing to comply with RFC8754 net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms net: dsa: ocelot: the MAC table on Felix is twice as large net: dsa: sja1105: the PTP_CLK extts input reacts on both edges selftests: net: tcp_mmap: fix SO_RCVLOWAT setting net: hsr: fix incorrect type usage for protocol variable net: macsec: fix rtnl locking issue net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del() ... 07 May 2020, 03:53:22 UTC
16f8036 Pablo Neira Ayuso 06 May 2020, 18:34:50 UTC net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE This patch adds FLOW_ACTION_HW_STATS_DONT_CARE which tells the driver that the frontend does not need counters, this hw stats type request never fails. The FLOW_ACTION_HW_STATS_DISABLED type explicitly requests the driver to disable the stats, however, if the driver cannot disable counters, it bails out. TCA_ACT_HW_STATS_* maintains the 1:1 mapping with FLOW_ACTION_HW_STATS_* except by disabled which is mapped to FLOW_ACTION_HW_STATS_DISABLED (this is 0 in tc). Add tc_act_hw_stats() to perform the mapping between TCA_ACT_HW_STATS_* and FLOW_ACTION_HW_STATS_*. Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:13:10 UTC
b095695 Lukas Bulwahn 06 May 2020, 20:29:06 UTC MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order Commit 9b038086f06b ("docs: networking: convert DIM to RST") added a new file entry to DYNAMIC INTERRUPT MODERATION to the end, and not following alphabetical order. So, ./scripts/checkpatch.pl -f MAINTAINERS complains: WARNING: Misordered MAINTAINERS entry - list file patterns in alphabetic order #5966: FILE: MAINTAINERS:5966: +F: lib/dim/ +F: Documentation/networking/net_dim.rst Reorder the file entries to keep MAINTAINERS nicely ordered. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:12:33 UTC
d3f3e6a David S. Miller 07 May 2020, 03:03:48 UTC Merge branch 'wireguard-fixes' Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc5 With Ubuntu and Debian having backported this into their kernels, we're finally seeing testing from places we hadn't seen prior, which is nice. With that comes more fixes: 1) The CI for PPC64 was running with extremely small stacks for 64-bit, causing spurious crashes in surprising places. 2) There's was an old leftover routing loop restriction, which no longer makes sense given the queueing architecture, and was causing problems for people who really did want nested routing. 3) Not yielding our kthread on CONFIG_PREEMPT_VOLUNTARY systems caused RCU stalls and other issues, reported by Wang Jian, with the fix suggested by Sultan Alsawaf. 4) Clang spewed warnings in a selftest for CONFIG_IPV6=n, reported by Arnd Bergmann. 5) A complicated if statement was simplified to an assignment while also making the likely/unlikely hinting more correct and simple, and increasing readability, suggested by Sultan. Patches (2) and (3) have Fixes: lines and are probably good candidates for stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:03:48 UTC
243f214 Jason A. Donenfeld 06 May 2020, 21:33:06 UTC wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing It's very unlikely that send will become true. It's nearly always false between 0 and 120 seconds of a session, and in most cases becomes true only between 120 and 121 seconds before becoming false again. So, unlikely(send) is clearly the right option here. What happened before was that we had this complex boolean expression with multiple likely and unlikely clauses nested. Since this is evaluated left-to-right anyway, the whole thing got converted to unlikely. So, we can clean this up to better represent what's going on. The generated code is the same. Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:03:47 UTC
4fed818 Jason A. Donenfeld 06 May 2020, 21:33:05 UTC wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning Without setting these to NULL, clang complains in certain configurations that have CONFIG_IPV6=n: In file included from drivers/net/wireguard/ratelimiter.c:223: drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning struct sk_buff *skb4, *skb6; ^ = NULL drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning struct ipv6hdr *hdr6; ^ We silence this warning by setting the variables to NULL as the warning suggests. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:03:47 UTC
4005f5c Jason A. Donenfeld 06 May 2020, 21:33:04 UTC wireguard: send/receive: cond_resched() when processing worker ringbuffers Users with pathological hardware reported CPU stalls on CONFIG_ PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning these workers would never terminate. That turned out not to be okay on systems without forced preemption, which Sultan observed. This commit adds a cond_resched() to the bottom of each loop iteration, so that these workers don't hog the core. Note that we don't need this on the napi poll worker, since that terminates after its budget is expended. Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Reported-by: Wang Jian <larkwang@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:03:47 UTC
b673e24 Jason A. Donenfeld 06 May 2020, 21:33:03 UTC wireguard: socket: remove errant restriction on looping to self It's already possible to create two different interfaces and loop packets between them. This has always been possible with tunnels in the kernel, and isn't specific to wireguard. Therefore, the networking stack already needs to deal with that. At the very least, the packet winds up exceeding the MTU and is discarded at that point. So, since this is already something that happens, there's no need to forbid the not very exceptional case of routing a packet back to the same interface; this loop is no different than others, and we shouldn't special case it, but rather rely on generic handling of loops in general. This also makes it easier to do interesting things with wireguard such as onion routing. At the same time, we add a selftest for this, ensuring that both onion routing works and infinite routing loops do not crash the kernel. We also add a test case for wireguard interfaces nesting packets and sending traffic between each other, as well as the loop in this case too. We make sure to send some throughput-heavy traffic for this use case, to stress out any possible recursion issues with the locks around workqueues. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:03:47 UTC
a0fd7cc Jason A. Donenfeld 06 May 2020, 21:33:02 UTC wireguard: selftests: use normal kernel stack size on ppc64 While at some point it might have made sense to be running these tests on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on 64-bit powerpc in a long time, and more interesting things that we test don't really work when we deviate from the default (16k). So, we stop pushing our luck in this commit, and return to the default instead of the minimum. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 03:03:47 UTC
6f5c27f Grygorii Strashko 05 May 2020, 16:31:26 UTC net: ethernet: ti: am65-cpsw-nuss: fix irqs type The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs triggering and NAPI scheduling for empty queues. It was discovered with RT-kernel. Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as IRQF_TRIGGER_HIGH. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:53:00 UTC
0735ccc Geert Uytterhoeven 05 May 2020, 13:28:09 UTC ionic: Use debugfs_create_bool() to export bool Currently bool ionic_cq.done_color is exported using debugfs_create_u8(), which requires a cast, preventing further compiler checks. Fix this by switching to debugfs_create_bool(), and dropping the cast. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:46:33 UTC
050569f Florian Fainelli 04 May 2020, 20:18:06 UTC net: dsa: Do not leave DSA master with NULL netdev_ops When ndo_get_phys_port_name() for the CPU port was added we introduced an early check for when the DSA master network device in dsa_master_ndo_setup() already implements ndo_get_phys_port_name(). When we perform the teardown operation in dsa_master_ndo_teardown() we would not be checking that cpu_dp->orig_ndo_ops was successfully allocated and non-NULL initialized. With network device drivers such as virtio_net, this leads to a NPD as soon as the DSA switch hanging off of it gets torn down because we are now assigning the virtio_net device's netdev_ops a NULL pointer. Fixes: da7b9e9b00d4 ("net: dsa: Add ndo_get_phys_port_name() for CPU port") Reported-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:31:54 UTC
6572215 Vladimir Oltean 04 May 2020, 19:58:56 UTC net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred This was caused by a poor merge conflict resolution on my side. The "act = &cls->rule->action.entries[0];" assignment was already present in the code prior to the patch mentioned below. Fixes: e13c2075280e ("net: dsa: refactor matchall mirred action to separate function") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:30:35 UTC
9274124 Willem de Bruijn 04 May 2020, 16:48:54 UTC net: stricter validation of untrusted gso packets Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:23:06 UTC
0cb7498 Ahmed Abdelsalam 04 May 2020, 14:42:11 UTC seg6: fix SRH processing to comply with RFC8754 The Segment Routing Header (SRH) which defines the SRv6 dataplane is defined in RFC8754. RFC8754 (section 4.1) defines the SR source node behavior which encapsulates packets into an outer IPv6 header and SRH. The SR source node encodes the full list of Segments that defines the packet path in the SRH. Then, the first segment from list of Segments is copied into the Destination address of the outer IPv6 header and the packet is sent to the first hop in its path towards the destination. If the Segment list has only one segment, the SR source node can omit the SRH as he only segment is added in the destination address. RFC8754 (section 4.1.1) defines the Reduced SRH, when a source does not require the entire SID list to be preserved in the SRH. A reduced SRH does not contain the first segment of the related SR Policy (the first segment is the one already in the DA of the IPv6 header), and the Last Entry field is set to n-2, where n is the number of elements in the SR Policy. RFC8754 (section 4.3.1.1) defines the SRH processing and the logic to validate the SRH (S09, S10, S11) which works for both reduced and non-reduced behaviors. This patch updates seg6_validate_srh() to validate the SRH as per RFC8754. Signed-off-by: Ahmed Abdelsalam <ahabdels@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:21:35 UTC
6e0ddb6 David S. Miller 07 May 2020, 00:15:38 UTC Merge branch 'FDB-fixes-for-Felix-and-Ocelot-switches' Vladimir Oltean says: ==================== FDB fixes for Felix and Ocelot switches This series fixes the following problems: - Dynamically learnt addresses never expiring (neither for Ocelot nor for Felix) - Half of the FDB not visible in 'bridge fdb show' (for Felix only) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:15:38 UTC
c0d7ecc Vladimir Oltean 03 May 2020, 22:20:27 UTC net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms One may notice that automatically-learnt entries 'never' expire, even though the bridge configures the address age period at 300 seconds. Actually the value written to hardware corresponds to a time interval 1000 times higher than intended, i.e. 83 hours. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Faineli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:15:25 UTC
21ce7f3 Vladimir Oltean 03 May 2020, 22:20:26 UTC net: dsa: ocelot: the MAC table on Felix is twice as large When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 May 2020, 00:15:24 UTC
b938895 Linus Torvalds 06 May 2020, 23:40:14 UTC Merge tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "Fix a resource allocation issue in cros_ec_sensorhub.c" * tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before claiming sensors 06 May 2020, 23:40:14 UTC
0ba83aa Vladimir Oltean 06 May 2020, 17:48:13 UTC net: dsa: sja1105: the PTP_CLK extts input reacts on both edges It looks like the sja1105 external timestamping input is not as generic as we thought. When fed a signal with 50% duty cycle, it will timestamp both the rising and the falling edge. When fed a short pulse signal, only the timestamp of the falling edge will be seen in the PTPSYNCTS register, because that of the rising edge had been overwritten. So the moral is: don't feed it short pulse inputs. Luckily this is not a complete deal breaker, as we can still work with 1 Hz square waves. But the problem is that the extts polling period was not dimensioned enough for this input signal. If we leave the period at half a second, we risk losing timestamps due to jitter in the measuring process. So we need to increase it to 4 times per second. Also, the very least we can do to inform the user is to deny any other flags combination than with PTP_RISING_EDGE and PTP_FALLING_EDGE both set. Fixes: 747e5eb31d59 ("net: dsa: sja1105: configure the PTP_CLK pin as EXT_TS or PER_OUT") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 22:03:14 UTC
a847241 Eric Dumazet 06 May 2020, 16:21:15 UTC selftests: net: tcp_mmap: fix SO_RCVLOWAT setting Since chunk_size is no longer an integer, we can not use it directly as an argument of setsockopt(). This patch should fix tcp_mmap for Big Endian kernels. Fixes: 597b01edafac ("selftests: net: avoid ptl lock contention in tcp_mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 22:01:30 UTC
f5dda31 Murali Karicheri 06 May 2020, 15:41:07 UTC net: hsr: fix incorrect type usage for protocol variable Fix following sparse checker warning:- net/hsr/hsr_slave.c:38:18: warning: incorrect type in assignment (different base types) net/hsr/hsr_slave.c:38:18: expected unsigned short [unsigned] [usertype] protocol net/hsr/hsr_slave.c:38:18: got restricted __be16 [usertype] h_proto net/hsr/hsr_slave.c:39:25: warning: restricted __be16 degrades to integer net/hsr/hsr_slave.c:39:57: warning: restricted __be16 degrades to integer Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 22:00:20 UTC
29ca3cd Antoine Tenart 06 May 2020, 13:58:30 UTC net: macsec: fix rtnl locking issue netdev_update_features() must be called with the rtnl lock taken. Not doing so triggers a warning, as ASSERT_RTNL() is used in __netdev_update_features(), the first function called by netdev_update_features(). Fix this. Fixes: c850240b6c41 ("net: macsec: report real_dev features when HW offloading is enabled") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 21:34:38 UTC
722c0f0 Dan Carpenter 06 May 2020, 10:16:56 UTC net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del() The "info->fs.location" is a u32 that comes from the user via the ethtool_set_rxnfc() function. We need to check for invalid values to prevent a buffer overflow. I copy and pasted this check from the mvpp2_ethtool_cls_rule_ins() function. Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 21:15:46 UTC
39bd16d Dan Carpenter 06 May 2020, 10:16:22 UTC net: mvpp2: prevent buffer overflow in mvpp22_rss_ctx() The "rss_context" variable comes from the user via ethtool_get_rxfh(). It can be any u32 value except zero. Eventually it gets passed to mvpp22_rss_ctx() and if it is over MVPP22_N_RSS_TABLES (8) then it results in an array overflow. Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 21:15:46 UTC
bf5525f Eric Dumazet 06 May 2020, 03:51:06 UTC selftests: net: tcp_mmap: clear whole tcp_zerocopy_receive struct We added fields in tcp_zerocopy_receive structure, so make sure to clear all fields to not pass garbage to the kernel. We were lucky because recent additions added 'out' parameters, still we need to clean our reference implementation, before folks copy/paste it. Fixes: c8856c051454 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Fixes: 33946518d493 ("tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 May 2020, 20:45:09 UTC
3c40cdb Linus Torvalds 06 May 2020, 17:20:00 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a potential scheduling latency problem for the algorithms used by WireGuard" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arch/nhpoly1305 - process in explicit 4k chunks crypto: arch/lib - limit simd usage to 4k chunks 06 May 2020, 17:20:00 UTC
dc56c5a Linus Torvalds 05 May 2020, 23:29:03 UTC Merge tag 'platform-drivers-x86-v5.7-2' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: - Avoid loading asus-nb-wmi module on selected laptop models - Fix S0ix debug support for Jasper Lake PMC - Few fixes which have been reported by Hulk bot and others * tag 'platform-drivers-x86-v5.7-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: thinkpad_acpi: Remove always false 'value < 0' statement platform/x86: intel_pmc_core: avoid unused-function warnings platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA platform/x86: intel_pmc_core: Change Jasper Lake S0ix debug reg map back to ICL platform/x86/intel-uncore-freq: make uncore_root_kobj static platform/x86: wmi: Make two functions static platform/x86: surface3_power: Fix a NULL vs IS_ERR() check in probe 05 May 2020, 23:29:03 UTC
81aabbb John Fastabend 04 May 2020, 17:21:44 UTC bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.size In bpf_tcp_ingress we used apply_bytes to subtract bytes from sg.size which is used to track total bytes in a message. But this is not correct because apply_bytes is itself modified in the main loop doing the mem_charge. Then at the end of this we have sg.size incorrectly set and out of sync with actual sk values. Then we can get a splat if we try to cork the data later and again try to redirect the msg to ingress. To fix instead of trying to track msg.size do the easy thing and include it as part of the sk_msg_xfer logic so that when the msg is moved the sg.size is always correct. To reproduce the below users will need ingress + cork and hit an error path that will then try to 'free' the skmsg. [ 173.699981] BUG: KASAN: null-ptr-deref in sk_msg_free_elem+0xdd/0x120 [ 173.699987] Read of size 8 at addr 0000000000000008 by task test_sockmap/5317 [ 173.700000] CPU: 2 PID: 5317 Comm: test_sockmap Tainted: G I 5.7.0-rc1+ #43 [ 173.700005] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019 [ 173.700009] Call Trace: [ 173.700021] dump_stack+0x8e/0xcb [ 173.700029] ? sk_msg_free_elem+0xdd/0x120 [ 173.700034] ? sk_msg_free_elem+0xdd/0x120 [ 173.700042] __kasan_report+0x102/0x15f [ 173.700052] ? sk_msg_free_elem+0xdd/0x120 [ 173.700060] kasan_report+0x32/0x50 [ 173.700070] sk_msg_free_elem+0xdd/0x120 [ 173.700080] __sk_msg_free+0x87/0x150 [ 173.700094] tcp_bpf_send_verdict+0x179/0x4f0 [ 173.700109] tcp_bpf_sendpage+0x3ce/0x5d0 Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/158861290407.14306.5327773422227552482.stgit@john-Precision-5820-Tower 05 May 2020, 22:22:22 UTC
3e104c2 John Fastabend 04 May 2020, 17:21:23 UTC bpf, sockmap: msg_pop_data can incorrecty set an sge length When sk_msg_pop() is called where the pop operation is working on the end of a sge element and there is no additional trailing data and there _is_ data in front of pop, like the following case, |____________a_____________|__pop__| We have out of order operations where we incorrectly set the pop variable so that instead of zero'ing pop we incorrectly leave it untouched, effectively. This can cause later logic to shift the buffers around believing it should pop extra space. The result is we have 'popped' more data then we expected potentially breaking program logic. It took us a while to hit this case because typically we pop headers which seem to rarely be at the end of a scatterlist elements but we can't rely on this. Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/158861288359.14306.7654891716919968144.stgit@john-Precision-5820-Tower 05 May 2020, 22:22:15 UTC
38212bb Roman Mashak 02 May 2020, 01:34:18 UTC neigh: send protocol value in neighbor create notification When a new neighbor entry has been added, event is generated but it does not include protocol, because its value is assigned after the event notification routine has run, so move protocol assignment code earlier. Fixes: df9b0e30d44c ("neighbor: Add protocol attribute") Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 May 2020, 20:38:59 UTC
755f573 Dejin Zheng 05 May 2020, 02:03:29 UTC net: broadcom: fix a mistake about ioremap resource Commit d7a5502b0bb8b ("net: broadcom: convert to devm_platform_ioremap_resource_byname()") will broke this driver. idm_base and nicpm_base were optional, after this change, they are mandatory. it will probe fails with -22 when the dtb doesn't have them defined. so revert part of this commit and make idm_base and nicpm_base as optional. Fixes: d7a5502b0bb8bde ("net: broadcom: convert to devm_platform_ioremap_resource_byname()") Reported-by: Jonathan Richardson <jonathan.richardson@broadcom.com> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ray Jui <ray.jui@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 May 2020, 18:11:12 UTC
f8a31ec Xiongfeng Wang 29 April 2020, 08:59:40 UTC platform/x86: thinkpad_acpi: Remove always false 'value < 0' statement Since 'value' is declared as unsigned long, the following statement is always false. value < 0 So let's remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 05 May 2020, 12:33:24 UTC
01f259f Arnd Bergmann 28 April 2020, 21:36:38 UTC platform/x86: intel_pmc_core: avoid unused-function warnings When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the functions that got moved out of the #ifdef section now cause a warning: drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function] 654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev, | ^~~~~~~~~~~~~~~~~~~~ drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function] 617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev, | ^~~~~~~~~~~~~~~~~~~~~~ Rather than add even more #ifdefs here, remove them entirely and let the compiler work it out, it can actually get rid of all the debugfs calls without problems as long as the struct member is there. The two PM functions just need a __maybe_unused annotations to avoid another warning instead of the #ifdef. Fixes: aae43c2bcdc1 ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 05 May 2020, 12:33:24 UTC
3bd12da Hans de Goede 22 April 2020, 22:05:59 UTC platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA asus-nb-wmi does not add any extra functionality on these Asus Transformer books. They have detachable keyboards, so the hotkeys are send through a HID device (and handled by the hid-asus driver) and also the rfkill functionality is not used on these devices. Besides not adding any extra functionality, initializing the WMI interface on these devices actually has a negative side-effect. For some reason the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED, high and there is no (WMI or other) interface to drive this low again causing the LED to be permanently on, even during suspend. This commit adds a blacklist of DMI system_ids on which not to load the asus-nb-wmi and adds these Transformer books to this list. This fixes the webcam LED being permanently on under Linux. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 05 May 2020, 12:32:51 UTC
e87fa33 Archana Patni 21 April 2020, 08:40:19 UTC platform/x86: intel_pmc_core: Change Jasper Lake S0ix debug reg map back to ICL Jasper Lake uses Icelake PCH IPs and the S0ix debug interfaces are same as Icelake. It uses SLP_S0_DBG register latch/read interface from Icelake generation. It doesn't use Tiger Lake LPM debug registers. Change the Jasper Lake S0ix debug interface to use the ICL reg map. Fixes: 16292bed9c56 ("platform/x86: intel_pmc_core: Add Atom based Jasper Lake (JSL) platform support") Signed-off-by: Archana Patni <archana.patni@intel.com> Acked-by: David E. Box <david.e.box@intel.com> Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 05 May 2020, 12:32:41 UTC
47cf1b4 Linus Torvalds 05 May 2020, 01:55:20 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - Wacom driver functional and regression fixes from Jason Gerecke - race condition fix in usbhid, found by syzbot and fixed by Alan Stern - a few device-specific quirks and ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock HID: mcp2221: add gpiolib dependency HID: i2c-hid: reset Synaptics SYNA2393 on resume HID: wacom: Report 2nd-gen Intuos Pro S center button status over BT HID: usbhid: Fix race between usbhid_close() and usbhid_stop() Revert "HID: wacom: generic: read the number of expected touches on a per collection basis" HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead HID: alps: Add AUI1657 device ID HID: logitech: Add support for Logitech G11 extra keys HID: multitouch: add eGalaxTouch P80H84 support HID: wacom: Read HID_DG_CONTACTMAX directly for non-generic devices 05 May 2020, 01:55:20 UTC
bd4af43 Qiushi Wu 02 May 2020, 22:42:59 UTC nfp: abm: fix a memory leak bug In function nfp_abm_vnic_set_mac, pointer nsp is allocated by nfp_nsp_open. But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released, which can lead to a memory leak bug. Fix this issue by adding nfp_nsp_close(nsp) in the error path. Fixes: f6e71efdf9fb1 ("nfp: abm: look up MAC addresses via management FW") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 19:04:12 UTC
8d9f73c Cong Wang 01 May 2020, 18:11:09 UTC atm: fix a memory leak of vcc->user_back In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added(). This fixes the following memory leak: unreferenced object 0xffff8880d9266b90 (size 16): comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5 ............kkk. backtrace: [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151 [<(____ptrval____)>] lane_ioctl+0x4b3/0x569 [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236 [<(____ptrval____)>] svc_ioctl+0x17d/0x198 [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f [<(____ptrval____)>] sock_ioctl+0x2f9/0x322 [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b [<(____ptrval____)>] ksys_ioctl+0x61/0x80 [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19 [<(____ptrval____)>] do_syscall_64+0x57/0x65 [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 18:59:38 UTC
93a2014 Cong Wang 01 May 2020, 18:11:08 UTC atm: fix a UAF in lec_arp_clear_vccs() Gengming reported a UAF in lec_arp_clear_vccs(), where we add a vcc socket to an entry in a per-device list but free the socket without removing it from the list when vcc->dev is NULL. We need to call lec_vcc_close() to search and remove those entries contain the vcc being destroyed. This can be done by calling vcc->push(vcc, NULL) unconditionally in vcc_destroy_socket(). Another issue discovered by Gengming's reproducer is the vcc->dev may point to the static device lecatm_dev, for which we don't need to register/unregister device, so we can just check for vcc->dev->ops->owner. Reported-by: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 18:59:20 UTC
44d95cc Colin Ian King 01 May 2020, 14:10:16 UTC net: stmmac: gmac5+: fix potential integer overflow on 32 bit multiply The multiplication of cfg->ctr[1] by 1000000000 is performed using a 32 bit multiplication (since cfg->ctr[1] is a u32) and this can lead to a potential overflow. Fix this by making the constant a ULL to ensure a 64 bit multiply occurs. Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+") Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 18:57:21 UTC
a7df487 Cong Wang 01 May 2020, 03:53:49 UTC net_sched: fix tcm_parent in tc filter dump When we tell kernel to dump filters from root (ffff:ffff), those filters on ingress (ffff:0000) are matched, but their true parents must be dumped as they are. However, kernel dumps just whatever we tell it, that is either ffff:ffff or ffff:0000: $ nl-cls-list --dev=dummy0 --parent=root cls basic dev dummy0 id none parent root prio 49152 protocol ip match-all cls basic dev dummy0 id :1 parent root prio 49152 protocol ip match-all $ nl-cls-list --dev=dummy0 --parent=ffff: cls basic dev dummy0 id none parent ffff: prio 49152 protocol ip match-all cls basic dev dummy0 id :1 parent ffff: prio 49152 protocol ip match-all This is confusing and misleading, more importantly this is a regression since 4.15, so the old behavior must be restored. And, when tc filters are installed on a tc class, the parent should be the classid, rather than the qdisc handle. Commit edf6711c9840 ("net: sched: remove classid and q fields from tcf_proto") removed the classid we save for filters, we can just restore this classid in tcf_block. Steps to reproduce this: ip li set dev dummy0 up tc qd add dev dummy0 ingress tc filter add dev dummy0 parent ffff: protocol arp basic action pass tc filter show dev dummy0 root Before this patch: filter protocol arp pref 49152 basic filter protocol arp pref 49152 basic handle 0x1 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 After this patch: filter parent ffff: protocol arp pref 49152 basic filter parent ffff: protocol arp pref 49152 basic handle 0x1 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 Fixes: a10fa20101ae ("net: sched: propagate q and parent from caller down to tcf_fill_node") Fixes: edf6711c9840 ("net: sched: remove classid and q fields from tcf_proto") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 18:53:33 UTC
071a43e Arnd Bergmann 30 April 2020, 10:39:02 UTC cxgb4/chcr: avoid -Wreturn-local-addr warning gcc-10 warns about functions that return a pointer to a stack variable. In chcr_write_cpl_set_tcb_ulp(), this does not actually happen, but it's too hard to see for the compiler: drivers/crypto/chelsio/chcr_ktls.c: In function 'chcr_write_cpl_set_tcb_ulp.constprop': drivers/crypto/chelsio/chcr_ktls.c:760:9: error: function may return address of local variable [-Werror=return-local-addr] 760 | return pos; | ^~~ drivers/crypto/chelsio/chcr_ktls.c:712:5: note: declared here 712 | u8 buf[48] = {0}; | ^~~ Split the middle part of the function out into a helper to make it easier to understand by both humans and compilers, which avoids the warning. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 18:47:52 UTC
c649c41 Julian Wiedmann 04 May 2020, 17:39:42 UTC s390/qeth: fix cancelling of TX timer on dev_close() With the introduction of TX coalescing, .ndo_start_xmit now potentially starts the TX completion timer. So only kill the timer _after_ TX has been disabled. Fixes: ee1e52d1e4bb ("s390/qeth: add TX IRQ coalescing support for IQD devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 18:21:40 UTC
9851a0d Linus Torvalds 04 May 2020, 18:20:32 UTC Merge tag 'gcc-plugins-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fixes from Kees Cook: "GCC 10 fixes for gcc-plugins: - Adjust caller of cgraph_create_edge for GCC 10 argument usage - Update common headers to build under GCC 10 (Frédéric Pierret)" * tag 'gcc-plugins-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-common.h: Update for GCC 10 gcc-plugins/stackleak: Avoid assignment for unused macro argument 04 May 2020, 18:20:32 UTC
a16a47e Linus Torvalds 04 May 2020, 18:10:24 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "A couple of bug fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: vsock: kick send_pkt worker once device is started virtio-blk: handle block_device_operations callbacks after hot unplug 04 May 2020, 18:10:24 UTC
d975cb7 Dejin Zheng 04 May 2020, 12:01:27 UTC net: enetc: fix an issue about leak system resources the related system resources were not released when enetc_hw_alloc() return error in the enetc_pci_mdio_probe(), add iounmap() for error handling label "err_hw_alloc" to fix it. Fixes: 6517798dd3432a ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 17:51:20 UTC
67f852e Linus Torvalds 04 May 2020, 17:47:41 UTC Merge tag 'flexible-array-member-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flex-array reverts from Gustavo Silva: "This reverts flexible array changes in include/uapi/ These structures can get embedded in other structures in user-space and cause all sorts of warnings and problems[1]. So, we better don't take any chances and keep the zero-length arrays in place for now" [1] https://lore.kernel.org/lkml/20200424121553.GE26002@ziepe.ca/ * tag 'flexible-array-member-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: uapi: revert flexible-array conversions 04 May 2020, 17:47:41 UTC
40e4730 Tariq Toukan 04 May 2020, 08:36:02 UTC net/mlx4_core: Fix use of ENOSPC around mlx4_counter_alloc() When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6a1fa ("net/mlx4_core: Allocate default counter per port") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 17:42:06 UTC
bea0c5c Aya Levin 04 May 2020, 08:27:46 UTC devlink: Fix reporter's recovery condition Devlink health core conditions the reporter's recovery with the expiration of the grace period. This is not relevant for the first recovery. Explicitly demand that the grace period will only apply to recoveries other than the first. Fixes: c8e1da0bf923 ("devlink: Add health report functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 17:40:39 UTC
f42234f Maxim Petrov 04 May 2020, 06:26:43 UTC stmmac: fix pointer check after utilization in stmmac_interrupt The paranoidal pointer check in IRQ handler looks very strange - it really protects us only against bogus drivers which request IRQ line with null pointer dev_id. However, the code fragment is incorrect because the dev pointer is used before the actual check which leads to undefined behavior. Remove the check to avoid confusing people with incorrect code. Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 17:33:53 UTC
980d692 Tuong Lien 04 May 2020, 04:15:54 UTC tipc: fix partial topology connection closure When an application connects to the TIPC topology server and subscribes to some services, a new connection is created along with some objects - 'tipc_subscription' to store related data correspondingly... However, there is one omission in the connection handling that when the connection or application is orderly shutdown (e.g. via SIGQUIT, etc.), the connection is not closed in kernel, the 'tipc_subscription' objects are not freed too. This results in: - The maximum number of subscriptions (65535) will be reached soon, new subscriptions will be rejected; - TIPC module cannot be removed (unless the objects are somehow forced to release first); The commit fixes the issue by closing the connection if the 'recvmsg()' returns '0' i.e. when the peer is shutdown gracefully. It also includes the other unexpected cases. Acked-by: Jon Maloy <jmaloy@redhat.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 17:31:13 UTC
86f8b1c Florian Fainelli 04 May 2020, 03:50:57 UTC net: dsa: Do not make user port errors fatal Prior to 1d27732f411d ("net: dsa: setup and teardown ports"), we would not treat failures to set-up an user port as fatal, but after this commit we would, which is a regression for some systems where interfaces may be declared in the Device Tree, but the underlying hardware may not be present (pluggable daughter cards for instance). Fixes: 1d27732f411d ("net: dsa: setup and teardown ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 04 May 2020, 17:29:47 UTC
1e6e9d0 Gustavo A. R. Silva 24 April 2020, 15:50:00 UTC uapi: revert flexible-array conversions These structures can get embedded in other structures in user-space and cause all sorts of warnings and problems. So, we better don't take any chances and keep the zero-length arrays in place for now. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 04 May 2020, 16:30:15 UTC
9d82973 Linus Torvalds 04 May 2020, 16:16:37 UTC gcc-10 warnings: fix low-hanging fruit Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 May 2020, 16:16:37 UTC
back to top