https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
affb028 Merge tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few clean ups and bug fixes: - replace open coded "ARRAY_SIZE()" with macro - updates to uprobes - bug fix for perf event filter on error path" * tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Enforce passing in filter=NULL to create_filter() trace_uprobe: Simplify probes_seq_show() trace_uprobe: Use %lx to display offset tracing/uprobe: Add support for overlayfs tracing: Use ARRAY_SIZE() macro instead of open coding it 13 April 2018, 03:54:01 UTC
ee9294d proc: fixup copyright sign Add copyright in two files before they get autorubberstamped. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 April 2018, 03:52:25 UTC
0c314a9 Merge tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - mark Extended Tags as broken on Broadcom HT1100 and HT2000 Root Ports to fix drm/Xorg hangs and unresponsive keyboards (Sinan Kaya) - remove useless messages during resource reassignment (Desnes A. Nunes do Rosario) * tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove messages about reassigning resources PCI: Mark Broadcom HT1100 and HT2000 Root Port Extended Tags as broken 13 April 2018, 03:50:38 UTC
681857e Merge branch 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - fix panic when halting system via "shutdown -h now" - drop own coding in favour of generic CONFIG_COMPAT_BINFMT_ELF implementation - add FPE_CONDTRAP constant: last outstanding parisc-specific cleanup for Eric Biedermans siginfo patches - move some functions to .init and some to .text.hot linker sections * 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent panic at system halt parisc: Switch to generic COMPAT_BINFMT_ELF parisc: Move cache flush functions into .text.hot section parisc/signal: Add FPE_CONDTRAP for conditional trap handling 13 April 2018, 00:07:04 UTC
80aa76b Merge tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull more xfs updates from Darrick Wong: "Most of these are code cleanups, but there are a couple of notable use-after-free bug fixes. This series has been run through a full xfstests run over the week and through a quick xfstests run against this morning's master, with no major failures reported. - clean up unnecessary function call parameters - fix a use-after-free bug when aborting logging intents - refactor filestreams state data to avoid use-after-free bug - fix incorrect removal of cow extents when truncating extended attributes. - refactor open-coded __set_page_dirty in favor of using vfs function. - fix a deadlock when fstrim and fs shutdown race" * tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: Force log to disk before reading the AGF during a fstrim Export __set_page_dirty xfs: only cancel cow blocks when truncating the data fork xfs: non-scrub - remove unused function parameters xfs: remove filestream item xfs_inode reference xfs: fix intent use-after-free on abort xfs: Remove "committed" argument of xfs_dir_ialloc 12 April 2018, 20:28:22 UTC
4ac1800 Merge tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull more gfs2 updates from Bob Peterson: "We decided to request the latest three patches to be merged into this merge window while it's still open. - The first patch adds a new function to lockref: lockref_put_not_zero - The second patch fixes GFS2's glock dump code so it uses the new lockref function. This fixes a problem whereby lock dumps could miss glocks. - I made a minor patch to update some comments and fix the lock ordering text in our gfs2-glocks.txt Documentation file" * tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Minor improvements to comments and documentation gfs2: Stop using rhashtable_walk_peek lockref: Add lockref_put_not_zero 12 April 2018, 20:00:44 UTC
a1bf4c7 Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Fix corner cases when handling device removal # v4.12+ - xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+ Features: - New sunrpc tracepoint for RPC pings - Finer grained NFSv4 attribute checking - Don't unnecessarily return NFS v4 delegations Other bugfixes and cleanups: - Several other small NFSoRDMA cleanups - Improvements to the sunrpc RTT measurements - A few sunrpc tracepoint cleanups - Various fixes for NFS v4 lock notifications - Various sunrpc and NFS v4 XDR encoding cleanups - Switch to the ida_simple API - Fix NFSv4.1 exclusive create - Forget acl cache after setattr operation - Don't advance the nfs_entry readdir cookie if xdr decoding fails" * tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits) NFS: advance nfs_entry cookie only after decoding completes successfully NFSv3/acl: forget acl cache after setattr NFSv4.1: Fix exclusive create NFSv4: Declare the size up to date after it was set. nfs: Use ida_simple API NFSv4: Fix the nfs_inode_set_delegation() arguments NFSv4: Clean up CB_GETATTR encoding NFSv4: Don't ask for attributes when ACCESS is protected by a delegation NFSv4: Add a helper to encode/decode struct timespec NFSv4: Clean up encode_attrs NFSv4; Clean up XDR encoding of type bitmap4 NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group SUNRPC: Add a helper for encoding opaque data inline SUNRPC: Add helpers for decoding opaque and string types NFSv4: Ignore change attribute invalidations if we hold a delegation NFS: More fine grained attribute tracking NFS: Don't force unnecessary cache invalidation in nfs_update_inode() NFS: Don't redirty the attribute cache in nfs_wcc_update_inode() NFS: Don't force a revalidation of all attributes if change is missing NFS: Convert NFS_INO_INVALID flags to unsigned long ... 12 April 2018, 19:55:50 UTC
7214dd4 Merge branch 'work.thaw' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs thaw updates from Al Viro: "An ancient series that has fallen through the cracks in the previous cycle" * 'work.thaw' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: buffer.c: call thaw_super during emergency thaw vfs: factor sb iteration out of do_emergency_remount 12 April 2018, 19:28:32 UTC
19e8a2f Merge branch 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "The AFS series posted by dhowells depended upon lookup_one_len() rework; now that prereq is in the mainline, that series had been rebased on top of it and got some exposure and testing..." * 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Do better accretion of small writes on newly created content afs: Add stats for data transfer operations afs: Trace protocol errors afs: Locally edit directory data for mkdir/create/unlink/... afs: Adjust the directory XDR structures afs: Split the directory content defs into a header afs: Fix directory handling afs: Split the dynroot stuff out and give it its own ops tables afs: Keep track of invalid-before version for dentry coherency afs: Rearrange status mapping afs: Make it possible to get the data version in readpage afs: Init inode before accessing cache afs: Introduce a statistics proc file afs: Dump bad status record afs: Implement @cell substitution handling afs: Implement @sys substitution handling afs: Prospectively look up extra files when doing a single lookup afs: Don't over-increment the cell usage count when pinning it afs: Fix checker warnings vfs: Remove the const from dir_context::actor 12 April 2018, 18:59:06 UTC
5d13659 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and GSO/LLTX properly. From Sabrina Dubroca. 2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell. 3) Don't uncompress in slip before rstate is initialized, from Tejaswi Tanikella. 4) When using 1.x firmware on aquantia, issue a deinit before we hardware reset the chip, otherwise we break dirty wake WOL. From Igor Russkikh. 5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi. 6) Fix ethtool -x crashes in bnxt_en, from Michael Chan. 7) Fix races in l2tp tunnel creation and duplicate tunnel detection, from Guillaume Nault. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) l2tp: fix race in duplicate tunnel detection l2tp: fix races in tunnel creation tun: send netlink notification when the device is modified tun: set the flags before registering the netdevice lan78xx: Don't reset the interface on open bnxt_en: Fix NULL pointer dereference at bnxt_free_irq(). bnxt_en: Need to include RDMA rings in bnxt_check_rings(). bnxt_en: Support max-mtu with VF-reps bnxt_en: Ignore src port field in decap filter nodes bnxt_en: do not allow wildcard matches for L2 flows bnxt_en: Fix ethtool -x crash when device is down. vhost: return bool from *_access_ok() functions vhost: fix vhost_vq_access_ok() log check vhost: Fix vhost_copy_to_user() net: aquantia: oops when shutdown on already stopped device net: aquantia: Regression on reset with 1.x firmware cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN slip: Check if rstate is initialized before uncompressing lan78xx: Avoid spurious kevent 4 "error" lan78xx: Correctly indicate invalid OTP ... 12 April 2018, 18:09:05 UTC
67a7a8f Merge tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A few fixes of Xen related core code and drivers" * tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen xen/acpi: off by one in read_acpi_id() xen/acpi: upload _PSD info for non Dom0 CPUs too x86/xen: Delay get_cpu_cap until stack canary is established xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END xen: xenbus: Catch closing of non existent transactions xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling 12 April 2018, 18:04:35 UTC
c5c177c Merge tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: "Fix for one swiotlb regression in 2.16 from Takashi" * tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix unexpected swiotlb_alloc_coherent failures 12 April 2018, 18:00:48 UTC
d1cb771 Merge tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Prevent bus reference leak in mmc_blk_init() MMC host: - tmio: Fix error handling when issuing CMD23 - jz4740: Fix race condition in IRQ mask update" * tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fix error handling when issuing CMD23 mmc: core: Prevent bus reference leak in mmc_blk_init() mmc: jz4740: Fix race condition in IRQ mask update 12 April 2018, 17:59:03 UTC
cb098d5 Merge tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kdb updates from Jason Wessel: - fix 2032 time access issues and new compiler warnings - minor regression test cleanup - formatting fixes for end user use of kdb * tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: use memmove instead of overlapping memcpy kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts() kdb: bl: don't use tab character in output kdb: drop newline in unknown command output kdb: make "mdr" command repeat kdb: use __ktime_get_real_seconds instead of __current_kernel_time misc: kgdbts: Display progress of asynchronous tests 12 April 2018, 17:21:19 UTC
07820c3 Merge tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze updates from Michal Simek: "Use generic pci_mmap_resource_range()" * tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Use generic pci_mmap_resource_range() microblaze: Provide pgprot_device/writecombine macros for nommu 12 April 2018, 17:18:02 UTC
3e7aafc GFS2: Minor improvements to comments and documentation This patch simply fixes some comments and the gfs2-glocks.txt file: Places where i_rwsem was called i_mutex, and adding i_rw_mutex. Signed-off-by: Bob Peterson <rpeterso@redhat.com> 12 April 2018, 17:07:51 UTC
3fd5d3a gfs2: Stop using rhashtable_walk_peek Function rhashtable_walk_peek is problematic because there is no guarantee that the glock previously returned still exists; when that key is deleted, rhashtable_walk_peek can end up returning a different key, which will cause an inconsistent glock dump. Fix this by keeping track of the current glock in the seq file iterator functions instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> 12 April 2018, 16:41:19 UTC
450b1f6 lockref: Add lockref_put_not_zero Put a lockref unless the lockref is dead or its count would become zero. This is the same as lockref_put_or_lock except that the lock is never left held. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> 12 April 2018, 16:41:19 UTC
c17b0aa Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "I have one regression fix for a minor build problem after the architecture removal series, plus a rework of the barriers in the readl/writel functions, thanks to work by Sinan Kaya: This started from a discussion on the linuxpcc and rdma mailing lists[1]. To summarize, we decided that architectures are responsible to serialize readl() and writel() accesses on a device MMIO space relative to DMA performed by that device. This series provides a pessimistic implementation of that behavior for asm-generic/io.h, which is in turn used by a number of architectures (h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and xtensa). Some of those presumably need no extra barriers, or something weaker than rmb()/wmb(), and they are advised to override the new default for better performance. For inb()/outb(), the same barriers are used, but architectures might want to add another barrier to outb() here if that can guarantee non-posted behavior (some architectures can, others cannot do that). The readl_relaxed()/writel_relaxed() family of functions retains the existing behavior with no extra barriers" [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: io: change writeX_relaxed() to remove barriers io: change readX_relaxed() to remove barriers dts: remove cris & metag dts hard link file io: change inX() to have their own IO barrier overrides io: change outX() to have their own IO barrier overrides io: define stronger ordering for the default writeX() implementation io: define stronger ordering for the default readX() implementation io: define several IO & PIO barrier types for the asm-generic version 12 April 2018, 16:15:48 UTC
e241e3f Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio update from Michael Tsirkin: "This adds reporting hugepage stats to virtio-balloon" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: export hugetlb page allocation counts 12 April 2018, 01:58:27 UTC
e5c3722 Merge tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - OF_IOMMU support for the Rockchip iommu driver so that it can use generic DT bindings - rework of locking in the AMD IOMMU interrupt remapping code to make it work better in RT kernels - support for improved iotlb flushing in the AMD IOMMU driver - support for 52-bit physical and virtual addressing in the ARM-SMMU - various other small fixes and cleanups * tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits) iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t iommu/rockchip: Support sharing IOMMU between masters iommu/rockchip: Add runtime PM support iommu/rockchip: Fix error handling in init iommu/rockchip: Use OF_IOMMU to attach devices automatically iommu/rockchip: Use IOMMU device for dma mapping operations dt-bindings: iommu/rockchip: Add clock property iommu/rockchip: Control clocks needed to access the IOMMU iommu/rockchip: Fix TLB flush of secondary IOMMUs iommu/rockchip: Use iopoll helpers to wait for hardware iommu/rockchip: Fix error handling in attach iommu/rockchip: Request irqs in rk_iommu_probe() iommu/rockchip: Fix error handling in probe iommu/rockchip: Prohibit unbind and remove iommu/amd: Return proper error code in irq_remapping_alloc() iommu/amd: Make amd_iommu_devtable_lock a spin_lock iommu/amd: Drop the lock while allocating new irq remap table iommu/amd: Factor out setting the remap table for a devid iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga() iommu/amd: Remove the special case from alloc_irq_table() ... 12 April 2018, 01:50:41 UTC
1fe4311 Merge tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These include one big-ticket item which is the rework of the idle loop in order to prevent CPUs from spending too much time in shallow idle states. It reduces idle power on some systems by 10% or more and may improve performance of workloads in which the idle loop overhead matters. This has been in the works for several weeks and it has been tested and reviewed quite thoroughly. Also included are changes that finalize the cpufreq cleanup moving frequency table validation from drivers to the core, a few fixes and cleanups of cpufreq drivers, a cpuidle documentation update and a PM QoS core update to mark the expected switch fall-throughs in it. Specifics: - Rework the idle loop in order to prevent CPUs from spending too much time in shallow idle states by making it stop the scheduler tick before putting the CPU into an idle state only if the idle duration predicted by the idle governor is long enough. That required the code to be reordered to invoke the idle governor before stopping the tick, among other things (Rafael Wysocki, Frederic Weisbecker, Arnd Bergmann). - Add the missing description of the residency sysfs attribute to the cpuidle documentation (Prashanth Prakash). - Finalize the cpufreq cleanup moving frequency table validation from drivers to the core (Viresh Kumar). - Fix a clock leak regression in the armada-37xx cpufreq driver (Gregory Clement). - Fix the initialization of the CPU performance data structures for shared policies in the CPPC cpufreq driver (Shunyong Yang). - Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a bit (Viresh Kumar, Rafael Wysocki). - Mark the expected switch fall-throughs in the PM QoS core (Gustavo Silva)" * tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) tick-sched: avoid a maybe-uninitialized warning cpufreq: Drop cpufreq_table_validate_and_show() cpufreq: SCMI: Don't validate the frequency table twice cpufreq: CPPC: Initialize shared perf capabilities of CPUs cpufreq: armada-37xx: Fix clock leak cpufreq: CPPC: Don't set transition_latency cpufreq: ti-cpufreq: Use builtin_platform_driver() cpufreq: intel_pstate: Do not include debugfs.h PM / QoS: mark expected switch fall-throughs cpuidle: Add definition of residency to sysfs documentation time: hrtimer: Use timerqueue_iterate_next() to get to the next timer nohz: Avoid duplication of code related to got_idle_tick nohz: Gather tick_sched booleans under a common flag field cpuidle: menu: Avoid selecting shallow states with stopped tick cpuidle: menu: Refine idle state selection for running tick sched: idle: Select idle state before stopping the tick time: hrtimer: Introduce hrtimer_next_event_without() time: tick-sched: Split tick_nohz_stop_sched_tick() cpuidle: Return nohz hint from cpuidle_select() jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC ... 12 April 2018, 00:03:20 UTC
9697376 Merge tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: "These commits have either been sitting in my INBOX or have been in my local tree for some time. I need to push them upstream: - Separate out config-bisect.pl from ktest.pl. This allows users to do config bisects without full ktest setup. - Email on status change. Allow the user to be emailed on test start, finish, failure, etc. - Other small fixes and enhancements" * tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits) ktest: Take submenu into account for grub2 menus ktest.pl: Add MAIL_COMMAND option to define how to send email ktest.pl: Use run_command to execute sending mail ktest.pl: Allow dodie be recursive ktest.pl: Kill test if mailer is not supported ktest.pl: Add MAIL_PATH option to define where to find the mailer ktest.pl: No need to print no mailer is specified when mailto is not Ktest: add email options to sample.config Ktest: Use dodie for critical falures Ktest: Add SigInt handling Ktest: Add email support ktest.pl: Detect if a config-bisect was interrupted ktest.pl: Make finding config-bisect.pl dynamic ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect ktest.pl: Use diffconfig if available for failed config bisects ktest.pl: Allow for the config-bisect.pl output to display to console ktest: Use config-bisect.pl in ktest.pl ktest: Add standalone config-bisect.pl program ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build ... 11 April 2018, 23:42:27 UTC
77cb51e Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code 11 April 2018, 23:39:34 UTC
375479c Merge git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - a new and faster epoll based IRQ controller and NIC driver - misc fixes and janitorial updates * git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: Fix vector raw inintialization logic Migrate vector timers to new timer API um: Compile with modern headers um: vector: Fix an error handling path in 'vector_parse()' um: vector: Fix a memory allocation check um: vector: fix missing unlock on error in vector_net_open() um: Add missing EXPORT for free_irq_by_fd() High Performance UML Vector Network Driver Epoll based IRQ controller um: Use POSIX ucontext_t instead of struct ucontext um: time: Use timespec64 for persistent clock um: Restore symbol versions for __memcpy and memcpy 11 April 2018, 23:36:47 UTC
45df60c Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two changes for the maintainer file, and one more fix for the newly added npcm platform, to enable the level 2 cache controller" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Update ASPEED entry with details MAINTAINERS: Migrate oxnas list to groups.io arm: npcm: enable L2 cache in NPCM7xx architecture 11 April 2018, 23:12:21 UTC
b82b681 Merge tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 update from Ley Foon Tan: "Use read_persistent_clock64() instead of read_persistent_clock()" * tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Use read_persistent_clock64() instead of read_persistent_clock() 11 April 2018, 23:02:18 UTC
0c84cee Merge branch 'l2tp-tunnel-creation-fixes' Guillaume Nault says: ==================== l2tp: tunnel creation fixes L2TP tunnel creation is racy. We need to make sure that the tunnel returned by l2tp_tunnel_create() isn't going to be freed while the caller is using it. This is done in patch #1, by separating tunnel creation from tunnel registration. With the tunnel registration code in place, we can now check for duplicate tunnels in a race-free way. This is done in patch #2, which incidentally removes the last use of l2tp_tunnel_find(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 21:41:28 UTC
f6cd651 l2tp: fix race in duplicate tunnel detection We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create() from creating a duplicate tunnel. A tunnel can be concurrently registered after l2tp_tunnel_find() returns. Therefore, searching for duplicates must be done at registration time. Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere anymore. Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 21:41:27 UTC
6b9f342 l2tp: fix races in tunnel creation l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel list and sets the socket's ->sk_user_data field, before returning it to the caller. Therefore, there are two ways the tunnel can be accessed and freed, before the caller even had the opportunity to take a reference. In practice, syzbot could crash the module by closing the socket right after a new tunnel was returned to pppol2tp_create(). This patch moves tunnel registration out of l2tp_tunnel_create(), so that the caller can safely hold a reference before publishing the tunnel. This second step is done with the new l2tp_tunnel_register() function, which is now responsible for associating the tunnel to its socket and for inserting it into the namespace's list. While moving the code to l2tp_tunnel_register(), a few modifications have been done. First, the socket validation tests are done in a helper function, for clarity. Also, modifying the socket is now done after having inserted the tunnel to the namespace's tunnels list. This will allow insertion to fail, without having to revert theses modifications in the error path (a followup patch will check for duplicate tunnels before insertion). Either the socket is a kernel socket which we control, or it is a user-space socket for which we have a reference on the file descriptor. In any case, the socket isn't going to be closed from under us. Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 21:41:27 UTC
6769828 parisc: Prevent panic at system halt When issuing a "shutdown -h now", the reboot syscall calls kernel_halt() which shouldn't return, otherwise one gets this panic: reboot: System halted Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.16.0-32bit+ #560 Backtrace: [<1018a694>] show_stack+0x18/0x28 [<106e68a8>] dump_stack+0x80/0x10c [<101a4df8>] panic+0xfc/0x290 [<101a90b8>] do_exit+0x73c/0x914 [<101c7e38>] SyS_reboot+0x190/0x1d4 [<1017e444>] syscall_exit+0x0/0x14 Fix it by letting machine_halt() call machine_power_off() which doesn't return. Signed-off-by: Helge Deller <deller@gmx.de> 11 April 2018, 20:28:41 UTC
83c1f36 tun: send netlink notification when the device is modified I added dumping of link information about tun devices over netlink in commit 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink"), but didn't add the missing netlink notifications when the device's exported properties change. This patch adds notifications when owner/group or flags are modified, when queues are attached/detached, and when a tun fd is closed. Reported-by: Thomas Haller <thaller@redhat.com> Fixes: 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:48:05 UTC
9fffc5c tun: set the flags before registering the netdevice Otherwise, register_netdevice advertises the creation of the device with the default flags, instead of what the user requested. Reported-by: Thomas Haller <thaller@redhat.com> Fixes: 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:48:05 UTC
47b9986 lan78xx: Don't reset the interface on open Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY initialisation into lan78xx_probe, but lan78xx_open subsequently calls lan78xx_reset. As well as forcing a second round of link negotiation, this reset frequently prevents the phy interrupt from being generated (even though the link is up), rendering the interface unusable. Fix this issue by removing the lan78xx_reset call from lan78xx_open. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:44:45 UTC
9cf74f5 Merge branch 'bnxt_en-Fixes-for-net' Michael Chan says: ==================== bnxt_en: Fixes for net. This bug fix series include NULL pointer fixes in ethtool -x code path and in the error clean up path when freeing IRQs, a ring accounting bug that missed rings used by the RDMA driver, and 3 bug fixes related to TC Flower and VF-reps. v2: Fixed commit message of patch 4. Changed the pound sign to $ sign in front of the ip command. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:42:00 UTC
cb98526 bnxt_en: Fix NULL pointer dereference at bnxt_free_irq(). When open fails during ethtool -L ring change, for example, the driver may crash at bnxt_free_irq() because bp->bnapi is NULL. If we fail to allocate all the new rings, bnxt_open_nic() will free all the memory including bp->bnapi. Subsequent call to bnxt_close_nic() will try to dereference bp->bnapi in bnxt_free_irq(). Fix it by checking for !bp->bnapi in bnxt_free_irq(). Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:42:00 UTC
11c3ec7 bnxt_en: Need to include RDMA rings in bnxt_check_rings(). With recent changes to reserve both L2 and RDMA rings, we need to include the RDMA rings in bnxt_check_rings(). Otherwise we will under-estimate the rings we need during ethtool -L and may lead to failure. Fixes: fbcfc8e46741 ("bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:42:00 UTC
9d96465 bnxt_en: Support max-mtu with VF-reps While a VF is configured with a bigger mtu (> 1500), any packets that are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath with the following message: "dropped over-mtu packet". Fix this by returning the max-mtu value for a VF-rep derived from its corresponding VF. VF-rep's mtu can be changed using 'ip' command as shown in this example: $ ip link set bnxt0_pf0vf0 mtu 9000 Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:42:00 UTC
479ca3b bnxt_en: Ignore src port field in decap filter nodes The driver currently uses src port field (along with other fields) in the decap tunnel key, while looking up and adding tunnel nodes. This leads to redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the flow engine. Fix this by ignoring the src port field in decap tunnel nodes. Fixes: f484f6782e01 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:41:59 UTC
e85a9be bnxt_en: do not allow wildcard matches for L2 flows Before this patch the following commands would succeed as far as the user was concerned: $ tc qdisc add dev p1p1 ingress $ tc filter add dev p1p1 parent ffff: protocol all \ flower skip_sw action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:01/44 action drop The current flow offload infrastructure used does not support wildcard matching for ethernet headers, so do not allow the second or third commands to succeed. If a user wants to drop traffic on that interface the protocol and MAC addresses need to be specified explicitly: $ tc qdisc add dev p1p1 ingress $ tc filter add dev p1p1 parent ffff: protocol arp \ flower skip_sw action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw action drop ... $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:01 action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:02 action drop ... There are also checks for VLAN parameters in this patch as other callers may wildcard those parameters even if tc does not. Using different flow infrastructure could allow this to work in the future for L2 flows, but for now it does not. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:41:59 UTC
7991cb9 bnxt_en: Fix ethtool -x crash when device is down. Fix ethtool .get_rxfh() crash by checking for valid indirection table address before copying the data. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2018, 18:41:59 UTC
8837c70 Merge branch 'akpm' (patches from Andrew) Merge more updates from Andrew Morton: - almost all of the rest of MM - kasan updates - lots of procfs work - misc things - lib/ updates - checkpatch - rapidio - ipc/shm updates - the start of willy's XArray conversion * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (140 commits) page cache: use xa_lock xarray: add the xa_lock to the radix_tree_root fscache: use appropriate radix tree accessors export __set_page_dirty unicore32: turn flush_dcache_mmap_lock into a no-op arm64: turn flush_dcache_mmap_lock into a no-op mac80211_hwsim: use DEFINE_IDA radix tree: use GFP_ZONEMASK bits of gfp_t for flags linux/const.h: refactor _BITUL and _BITULL a bit linux/const.h: move UL() macro to include/linux/const.h linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI xen, mm: allow deferred page initialization for xen pv domains elf: enforce MAP_FIXED on overlaying elf segments fs, elf: drop MAP_FIXED usage from elf_map mm: introduce MAP_FIXED_NOREPLACE MAINTAINERS: update bouncing aacraid@adaptec.com addresses fs/dcache.c: add cond_resched() in shrink_dentry_list() include/linux/kfifo.h: fix comment ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param ... 11 April 2018, 17:51:26 UTC
b93b016 page cache: use xa_lock Remove the address_space ->tree_lock and use the xa_lock newly added to the radix_tree_root. Rename the address_space ->page_tree to ->i_pages, since we don't really care that it's a tree. [willy@infradead.org: fix nds32, fs/dax.c] Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
f6bb2a2 xarray: add the xa_lock to the radix_tree_root This results in no change in structure size on 64-bit machines as it fits in the padding between the gfp_t and the void *. 32-bit machines will grow the structure from 8 to 12 bytes. Almost all radix trees are protected with (at least) a spinlock, so as they are converted from radix trees to xarrays, the data structures will shrink again. Initialising the spinlock requires a name for the benefit of lockdep, so RADIX_TREE_INIT() now needs to know the name of the radix tree it's initialising, and so do IDR_INIT() and IDA_INIT(). Also add the xa_lock() and xa_unlock() family of wrappers to make it easier to use the lock. If we could rely on -fplan9-extensions in the compiler, we could avoid all of this syntactic sugar, but that wasn't added until gcc 4.6. Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
e5a9554 fscache: use appropriate radix tree accessors Don't open-code accesses to data structure internals. Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
f82b376 export __set_page_dirty XFS currently contains a copy-and-paste of __set_page_dirty(). Export it from buffer.c instead. Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Dave Chinner <david@fromorbit.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
d339d70 unicore32: turn flush_dcache_mmap_lock into a no-op Unicore doesn't walk the VMA tree in its flush_dcache_page() implementation, so has no need to take the tree_lock. Link: http://lkml.kernel.org/r/20180313132639.17387-5-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
427c896 arm64: turn flush_dcache_mmap_lock into a no-op ARM64 doesn't walk the VMA tree in its flush_dcache_page() implementation, so has no need to take the tree_lock. Link: http://lkml.kernel.org/r/20180313132639.17387-4-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
60a0527 mac80211_hwsim: use DEFINE_IDA This is preferred to opencoding an IDA_INIT. Link: http://lkml.kernel.org/r/20180313132639.17387-2-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
fa290cd radix tree: use GFP_ZONEMASK bits of gfp_t for flags Patch series "XArray", v9. (First part thereof). This patchset is, I believe, appropriate for merging for 4.17. It contains the XArray implementation, to eventually replace the radix tree, and converts the page cache to use it. This conversion keeps the radix tree and XArray data structures in sync at all times. That allows us to convert the page cache one function at a time and should allow for easier bisection. Other than renaming some elements of the structures, the data structures are fundamentally unchanged; a radix tree walk and an XArray walk will touch the same number of cachelines. I have changes planned to the XArray data structure, but those will happen in future patches. Improvements the XArray has over the radix tree: - The radix tree provides operations like other trees do; 'insert' and 'delete'. But what most users really want is an automatically resizing array, and so it makes more sense to give users an API that is like an array -- 'load' and 'store'. We still have an 'insert' operation for users that really want that semantic. - The XArray considers locking as part of its API. This simplifies a lot of users who formerly had to manage their own locking just for the radix tree. It also improves code generation as we can now tell RCU that we're holding a lock and it doesn't need to generate as much fencing code. The other advantage is that tree nodes can be moved (not yet implemented). - GFP flags are now parameters to calls which may need to allocate memory. The radix tree forced users to decide what the allocation flags would be at creation time. It's much clearer to specify them at allocation time. - Memory is not preloaded; we don't tie up dozens of pages on the off chance that the slab allocator fails. Instead, we drop the lock, allocate a new node and retry the operation. We have to convert all the radix tree, IDA and IDR preload users before we can realise this benefit, but I have not yet found a user which cannot be converted. - The XArray provides a cmpxchg operation. The radix tree forces users to roll their own (and at least four have). - Iterators take a 'max' parameter. That simplifies many users and will reduce the amount of iteration done. - Iteration can proceed backwards. We only have one user for this, but since it's called as part of the pagefault readahead algorithm, that seemed worth mentioning. - RCU-protected pointers are not exposed as part of the API. There are some fun bugs where the page cache forgets to use rcu_dereference() in the current codebase. - Value entries gain an extra bit compared to radix tree exceptional entries. That gives us the extra bit we need to put huge page swap entries in the page cache. - Some iterators now take a 'filter' argument instead of having separate iterators for tagged/untagged iterations. The page cache is improved by this: - Shorter, easier to read code - More efficient iterations - Reduction in size of struct address_space - Fewer walks from the top of the data structure; the XArray API encourages staying at the leaf node and conducting operations there. This patch (of 8): None of these bits may be used for slab allocations, so we can use them as radix tree flags as long as we mask them off before passing them to the slab allocator. Move the IDR flag from the high bits to the GFP_ZONEMASK bits. Link: http://lkml.kernel.org/r/20180313132639.17387-3-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:39 UTC
21e7bc6 linux/const.h: refactor _BITUL and _BITULL a bit Minor cleanups available by _UL and _ULL. Link: http://lkml.kernel.org/r/1519301715-31798-5-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
2dd8a62 linux/const.h: move UL() macro to include/linux/const.h ARM, ARM64 and UniCore32 duplicate the definition of UL(): #define UL(x) _AC(x, UL) This is not actually arch-specific, so it will be useful to move it to a common header. Currently, we only have the uapi variant for linux/const.h, so I am creating include/linux/const.h. I also added _UL(), _ULL() and ULL() because _AC() is mostly used in the form either _AC(..., UL) or _AC(..., ULL). I expect they will be replaced in follow-up cleanups. The underscore-prefixed ones should be used for exported headers. Link: http://lkml.kernel.org/r/1519301715-31798-4-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
2a6cc8a linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI Patch series "linux/const.h: cleanups of macros such as UL(), _BITUL(), BIT() etc", v3. ARM, ARM64, UniCore32 define UL() as a shorthand of _AC(..., UL). More architectures may introduce it in the future. UL() is arch-agnostic, and useful. So let's move it to include/linux/const.h Currently, <asm/memory.h> must be included to use UL(). It pulls in more bloats just for defining some bit macros. I posted V2 one year ago. The previous posts are: https://patchwork.kernel.org/patch/9498273/ https://patchwork.kernel.org/patch/9498275/ https://patchwork.kernel.org/patch/9498269/ https://patchwork.kernel.org/patch/9498271/ At that time, what blocked this series was a comment from David Howells: You need to be very careful doing this. Some userspace stuff depends on the guard macro names on the kernel header files. (https://patchwork.kernel.org/patch/9498275/) Looking at the code closer, I noticed this is not a problem. See the following line. https://github.com/torvalds/linux/blob/v4.16-rc2/scripts/headers_install.sh#L40 scripts/headers_install.sh rips off _UAPI prefix from guard macro names. I ran "make headers_install" and confirmed the result is what I expect. So, we can prefix the include guard of include/uapi/linux/const.h, and add a new include/linux/const.h. This patch (of 4): I am going to add include/linux/const.h for the kernel space. Add _UAPI to the include guard of include/uapi/linux/const.h to prepare for that. Please notice the guard name of the exported one will be kept as-is. So, this commit has no impact to the userspace even if some userspace stuff depends on the guard macro names. scripts/headers_install.sh processes exported headers by SED, and rips off "_UAPI" from guard macro names. #ifndef _UAPI_LINUX_CONST_H #define _UAPI_LINUX_CONST_H will be turned into #ifndef _LINUX_CONST_H #define _LINUX_CONST_H Link: http://lkml.kernel.org/r/1519301715-31798-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: David Howells <dhowells@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
6f84f8d xen, mm: allow deferred page initialization for xen pv domains Juergen Gross noticed that commit f7f99100d8d ("mm: stop zeroing memory during allocation in vmemmap") broke XEN PV domains when deferred struct page initialization is enabled. This is because the xen's PagePinned() flag is getting erased from struct pages when they are initialized later in boot. Juergen fixed this problem by disabling deferred pages on xen pv domains. It is desirable, however, to have this feature available as it reduces boot time. This fix re-enables the feature for pv-dmains, and fixes the problem the following way: The fix is to delay setting PagePinned flag until struct pages for all allocated memory are initialized, i.e. until after free_all_bootmem(). A new x86_init.hyper op init_after_bootmem() is called to let xen know that boot allocator is done, and hence struct pages for all the allocated memory are now initialized. If deferred page initialization is enabled, the rest of struct pages are going to be initialized later in boot once page_alloc_init_late() is called. xen_after_bootmem() walks page table's pages and marks them pinned. Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andy Lutomirski <luto@kernel.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Mathias Krause <minipli@googlemail.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jia Zhang <zhang.jia@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
ad55eac elf: enforce MAP_FIXED on overlaying elf segments Anshuman has reported that with "fs, elf: drop MAP_FIXED usage from elf_map" applied, some ELF binaries in his environment fail to start with [ 23.423642] 9148 (sed): Uhuuh, elf segment at 0000000010030000 requested but the memory is mapped already [ 23.423706] requested [10030000, 10040000] mapped [10030000, 10040000] 100073 anon The reason is that the above binary has overlapping elf segments: LOAD 0x0000000000000000 0x0000000010000000 0x0000000010000000 0x0000000000013a8c 0x0000000000013a8c R E 10000 LOAD 0x000000000001fd40 0x000000001002fd40 0x000000001002fd40 0x00000000000002c0 0x00000000000005e8 RW 10000 LOAD 0x0000000000020328 0x0000000010030328 0x0000000010030328 0x0000000000000384 0x00000000000094a0 RW 10000 That binary has two RW LOAD segments, the first crosses a page border into the second 0x1002fd40 (LOAD2-vaddr) + 0x5e8 (LOAD2-memlen) == 0x10030328 (LOAD3-vaddr) Handle this situation by enforcing MAP_FIXED when we establish a temporary brk VMA to handle overlapping segments. All other mappings will still use MAP_FIXED_NOREPLACE. Link: http://lkml.kernel.org/r/20180213100440.GM3443@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: Andrei Vagin <avagin@openvz.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kees Cook <keescook@chromium.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
4ed2863 fs, elf: drop MAP_FIXED usage from elf_map Both load_elf_interp and load_elf_binary rely on elf_map to map segments on a controlled address and they use MAP_FIXED to enforce that. This is however dangerous thing prone to silent data corruption which can be even exploitable. Let's take CVE-2017-1000253 as an example. At the time (before commit eab09532d400: "binfmt_elf: use ELF_ET_DYN_BASE only for PIE") ELF_ET_DYN_BASE was at TASK_SIZE / 3 * 2 which is not that far away from the stack top on 32b (legacy) memory layout (only 1GB away). Therefore we could end up mapping over the existing stack with some luck. The issue has been fixed since then (a87938b2e246: "fs/binfmt_elf.c: fix bug in loading of PIE binaries"), ELF_ET_DYN_BASE moved moved much further from the stack (eab09532d400 and later by c715b72c1ba4: "mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes") and excessive stack consumption early during execve fully stopped by da029c11e6b1 ("exec: Limit arg stack to at most 75% of _STK_LIM"). So we should be safe and any attack should be impractical. On the other hand this is just too subtle assumption so it can break quite easily and hard to spot. I believe that the MAP_FIXED usage in load_elf_binary (et. al) is still fundamentally dangerous. Moreover it shouldn't be even needed. We are at the early process stage and so there shouldn't be unrelated mappings (except for stack and loader) existing so mmap for a given address should succeed even without MAP_FIXED. Something is terribly wrong if this is not the case and we should rather fail than silently corrupt the underlying mapping. Address this issue by changing MAP_FIXED to the newly added MAP_FIXED_NOREPLACE. This will mean that mmap will fail if there is an existing mapping clashing with the requested one without clobbering it. [mhocko@suse.com: fix build] [akpm@linux-foundation.org: coding-style fixes] [avagin@openvz.org: don't use the same value for MAP_FIXED_NOREPLACE and MAP_SYNC] Link: http://lkml.kernel.org/r/20171218184916.24445-1-avagin@openvz.org Link: http://lkml.kernel.org/r/20171213092550.2774-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Kees Cook <keescook@chromium.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
a4ff8e8 mm: introduce MAP_FIXED_NOREPLACE Patch series "mm: introduce MAP_FIXED_NOREPLACE", v2. This has started as a follow up discussion [3][4] resulting in the runtime failure caused by hardening patch [5] which removes MAP_FIXED from the elf loader because MAP_FIXED is inherently dangerous as it might silently clobber an existing underlying mapping (e.g. stack). The reason for the failure is that some architectures enforce an alignment for the given address hint without MAP_FIXED used (e.g. for shared or file backed mappings). One way around this would be excluding those archs which do alignment tricks from the hardening [6]. The patch is really trivial but it has been objected, rightfully so, that this screams for a more generic solution. We basically want a non-destructive MAP_FIXED. The first patch introduced MAP_FIXED_NOREPLACE which enforces the given address but unlike MAP_FIXED it fails with EEXIST if the given range conflicts with an existing one. The flag is introduced as a completely new one rather than a MAP_FIXED extension because of the backward compatibility. We really want a never-clobber semantic even on older kernels which do not recognize the flag. Unfortunately mmap sucks wrt flags evaluation because we do not EINVAL on unknown flags. On those kernels we would simply use the traditional hint based semantic so the caller can still get a different address (which sucks) but at least not silently corrupt an existing mapping. I do not see a good way around that. Except we won't export expose the new semantic to the userspace at all. It seems there are users who would like to have something like that. Jemalloc has been mentioned by Michael Ellerman [7] Florian Weimer has mentioned the following: : glibc ld.so currently maps DSOs without hints. This means that the kernel : will map right next to each other, and the offsets between them a completely : predictable. We would like to change that and supply a random address in a : window of the address space. If there is a conflict, we do not want the : kernel to pick a non-random address. Instead, we would try again with a : random address. John Hubbard has mentioned CUDA example : a) Searches /proc/<pid>/maps for a "suitable" region of available : VA space. "Suitable" generally means it has to have a base address : within a certain limited range (a particular device model might : have odd limitations, for example), it has to be large enough, and : alignment has to be large enough (again, various devices may have : constraints that lead us to do this). : : This is of course subject to races with other threads in the process. : : Let's say it finds a region starting at va. : : b) Next it does: : p = mmap(va, ...) : : *without* setting MAP_FIXED, of course (so va is just a hint), to : attempt to safely reserve that region. If p != va, then in most cases, : this is a failure (almost certainly due to another thread getting a : mapping from that region before we did), and so this layer now has to : call munmap(), before returning a "failure: retry" to upper layers. : : IMPROVEMENT: --> if instead, we could call this: : : p = mmap(va, ... MAP_FIXED_NOREPLACE ...) : : , then we could skip the munmap() call upon failure. This : is a small thing, but it is useful here. (Thanks to Piotr : Jaroszynski and Mark Hairgrove for helping me get that detail : exactly right, btw.) : : c) After that, CUDA suballocates from p, via: : : q = mmap(sub_region_start, ... MAP_FIXED ...) : : Interestingly enough, "freeing" is also done via MAP_FIXED, and : setting PROT_NONE to the subregion. Anyway, I just included (c) for : general interest. Atomic address range probing in the multithreaded programs in general sounds like an interesting thing to me. The second patch simply replaces MAP_FIXED use in elf loader by MAP_FIXED_NOREPLACE. I believe other places which rely on MAP_FIXED should follow. Actually real MAP_FIXED usages should be docummented properly and they should be more of an exception. [1] http://lkml.kernel.org/r/20171116101900.13621-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/20171129144219.22867-1-mhocko@kernel.org [3] http://lkml.kernel.org/r/20171107162217.382cd754@canb.auug.org.au [4] http://lkml.kernel.org/r/1510048229.12079.7.camel@abdul.in.ibm.com [5] http://lkml.kernel.org/r/20171023082608.6167-1-mhocko@kernel.org [6] http://lkml.kernel.org/r/20171113094203.aofz2e7kueitk55y@dhcp22.suse.cz [7] http://lkml.kernel.org/r/87efp1w7vy.fsf@concordia.ellerman.id.au This patch (of 2): MAP_FIXED is used quite often to enforce mapping at the particular range. The main problem of this flag is, however, that it is inherently dangerous because it unmaps existing mappings covered by the requested range. This can cause silent memory corruptions. Some of them even with serious security implications. While the current semantic might be really desiderable in many cases there are others which would want to enforce the given range but rather see a failure than a silent memory corruption on a clashing range. Please note that there is no guarantee that a given range is obeyed by the mmap even when it is free - e.g. arch specific code is allowed to apply an alignment. Introduce a new MAP_FIXED_NOREPLACE flag for mmap to achieve this behavior. It has the same semantic as MAP_FIXED wrt. the given address request with a single exception that it fails with EEXIST if the requested address is already covered by an existing mapping. We still do rely on get_unmaped_area to handle all the arch specific MAP_FIXED treatment and check for a conflicting vma after it returns. The flag is introduced as a completely new one rather than a MAP_FIXED extension because of the backward compatibility. We really want a never-clobber semantic even on older kernels which do not recognize the flag. Unfortunately mmap sucks wrt. flags evaluation because we do not EINVAL on unknown flags. On those kernels we would simply use the traditional hint based semantic so the caller can still get a different address (which sucks) but at least not silently corrupt an existing mapping. I do not see a good way around that. [mpe@ellerman.id.au: fix whitespace] [fail on clashing range with EEXIST as per Florian Weimer] [set MAP_FIXED before round_hint_to_min as per Khalid Aziz] Link: http://lkml.kernel.org/r/20171213092550.2774-2-mhocko@kernel.org Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Jason Evans <jasone@google.com> Cc: David Goldblatt <davidtgoldblatt@gmail.com> Cc: Edward Tomasz Napierała <trasz@FreeBSD.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
721d8b4 MAINTAINERS: update bouncing aacraid@adaptec.com addresses Adaptec is now part of Microsemi. Commit 2a81ffdd9da1 ("MAINTAINERS: Update email address for aacraid") updated only one of the driver maintainer addresses. Update the other two sections as the aacraid@adaptec.com address bounces. Link: http://lkml.kernel.org/r/1522103936.12357.27.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
32785c0 fs/dcache.c: add cond_resched() in shrink_dentry_list() As previously reported (https://patchwork.kernel.org/patch/8642031/) it's possible to call shrink_dentry_list with a large number of dentries (> 10000). This, in turn, could trigger the softlockup detector and possibly trigger a panic. In addition to the unmount path being vulnerable to this scenario, at SuSE we've observed similar situation happening during process exit on processes that touch a lot of dentries. Here is an excerpt from a crash dump. The number after the colon are the number of dentries on the list passed to shrink_dentry_list: PID 99760: 10722 PID 107530: 215 PID 108809: 24134 PID 108877: 21331 PID 141708: 16487 So we want to kill between 15k-25k dentries without yielding. And one possible call stack looks like: 4 [ffff8839ece41db0] _raw_spin_lock at ffffffff8152a5f8 5 [ffff8839ece41db0] evict at ffffffff811c3026 6 [ffff8839ece41dd0] __dentry_kill at ffffffff811bf258 7 [ffff8839ece41df0] shrink_dentry_list at ffffffff811bf593 8 [ffff8839ece41e18] shrink_dcache_parent at ffffffff811bf830 9 [ffff8839ece41e50] proc_flush_task at ffffffff8120dd61 10 [ffff8839ece41ec0] release_task at ffffffff81059ebd 11 [ffff8839ece41f08] do_exit at ffffffff8105b8ce 12 [ffff8839ece41f78] sys_exit at ffffffff8105bd53 13 [ffff8839ece41f80] system_call_fastpath at ffffffff81532909 While some of the callers of shrink_dentry_list do use cond_resched, this is not sufficient to prevent softlockups. So just move cond_resched into shrink_dentry_list from its callers. David said: I've found hundreds of occurrences of warnings that we emit when need_resched stays set for a prolonged period of time with the stack trace that is included in the change log. Link: http://lkml.kernel.org/r/1521718946-31521-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
de99626 include/linux/kfifo.h: fix comment Clean up unusual formatting in the note about locking. Link: http://lkml.kernel.org/r/20180324002630.13046-1-Valentin.Vidic@CARNet.hr Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr> Cc: Stefani Seibold <stefani@seibold.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Sean Young <sean@mess.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
a61fc2c ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops This was added by the recent "ipc/shm.c: add split function to shm_vm_ops", but it is not necessary. Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
24704f3 kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param Kdoc comments are added to the do_proc_dointvec_minmax_conv_param and do_proc_douintvec_minmax_conv_param structures thare are used internally for range checking. The error codes returned by proc_dointvec_minmax() and proc_douintvec_minmax() are also documented. Link: http://lkml.kernel.org/r/1519926220-7453-3-git-send-email-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
64a11f3 fs/proc/proc_sysctl.c: fix typo in sysctl_check_table_array() Patch series "ipc: Clamp *mni to the real IPCMNI limit", v3. The sysctl parameters msgmni, shmmni and semmni have an inherent limit of IPC_MNI (32k). However, users may not be aware of that because they can write a value much higher than that without getting any error or notification. Reading the parameters back will show the newly written values which are not real. Enforcing the limit by failing sysctl parameter write, however, can break existing user applications. To address this delemma, a new flags field is introduced into the ctl_table. The value CTL_FLAGS_CLAMP_RANGE can be added to any ctl_table entries to enable a looser range clamping without returning any error. For example, .flags = CTL_FLAGS_CLAMP_RANGE, This flags value are now used for the range checking of shmmni, msgmni and semmni without breaking existing applications. If any out of range value is written to those sysctl parameters, the following warning will be printed instead. Kernel parameter "shmmni" was set out of range [0, 32768], clamped to 32768. Reading the values back will show 32768 instead of some fake values. This patch (of 6): Fix a typo. Link: http://lkml.kernel.org/r/1519926220-7453-2-git-send-email-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:38 UTC
23c8cec ipc/msg: introduce msgctl(MSG_STAT_ANY) There is a permission discrepancy when consulting msq ipc object metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the msq metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new MSG_STAT_ANY command such that the msq ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Robert Kettler <robert.kettler@outlook.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
a280d6d ipc/sem: introduce semctl(SEM_STAT_ANY) There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the sma metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases for shm. This patch introduces a new SEM_STAT_ANY command such that the sem ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Robert Kettler <robert.kettler@outlook.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
c21a697 ipc/shm: introduce shmctl(SHM_STAT_ANY) Patch series "sysvipc: introduce STAT_ANY commands", v2. The following patches adds the discussed (see [1]) new command for shm as well as for sems and msq as they are subject to the same discrepancies for ipc object permission checks between the syscall and via procfs. These new commands are justified in that (1) we are stuck with this semantics as changing syscall and procfs can break userland; and (2) some users can benefit from performance (for large amounts of shm segments, for example) from not having to parse the procfs interface. Once merged, I will submit the necesary manpage updates. But I'm thinking something like: : diff --git a/man2/shmctl.2 b/man2/shmctl.2 : index 7bb503999941..bb00bbe21a57 100644 : --- a/man2/shmctl.2 : +++ b/man2/shmctl.2 : @@ -41,6 +41,7 @@ : .\" 2005-04-25, mtk -- noted aberrant Linux behavior w.r.t. new : .\" attaches to a segment that has already been marked for deletion. : .\" 2005-08-02, mtk: Added IPC_INFO, SHM_INFO, SHM_STAT descriptions. : +.\" 2018-02-13, dbueso: Added SHM_STAT_ANY description. : .\" : .TH SHMCTL 2 2017-09-15 "Linux" "Linux Programmer's Manual" : .SH NAME : @@ -242,6 +243,18 @@ However, the : argument is not a segment identifier, but instead an index into : the kernel's internal array that maintains information about : all shared memory segments on the system. : +.TP : +.BR SHM_STAT_ANY " (Linux-specific)" : +Return a : +.I shmid_ds : +structure as for : +.BR SHM_STAT . : +However, the : +.I shm_perm.mode : +is not checked for read access for : +.IR shmid , : +resembing the behaviour of : +/proc/sysvipc/shm. : .PP : The caller can prevent or allow swapping of a shared : memory segment with the following \fIcmd\fP values: : @@ -287,7 +300,7 @@ operation returns the index of the highest used entry in the : kernel's internal array recording information about all : shared memory segments. : (This information can be used with repeated : -.B SHM_STAT : +.B SHM_STAT/SHM_STAT_ANY : operations to obtain information about all shared memory segments : on the system.) : A successful : @@ -328,7 +341,7 @@ isn't accessible. : \fIshmid\fP is not a valid identifier, or \fIcmd\fP : is not a valid command. : Or: for a : -.B SHM_STAT : +.B SHM_STAT/SHM_STAT_ANY : operation, the index value specified in : .I shmid : referred to an array slot that is currently unused. This patch (of 3): There is a permission discrepancy when consulting shm ipc object metadata between /proc/sysvipc/shm (0444) and the SHM_STAT shmctl command. The later does permission checks for the object vs S_IRUGO. As such there can be cases where EACCESS is returned via syscall but the info is displayed anyways in the procfs files. While this might have security implications via info leaking (albeit no writing to the shm metadata), this behavior goes way back and showing all the objects regardless of the permissions was most likely an overlook - so we are stuck with it. Furthermore, modifying either the syscall or the procfs file can cause userspace programs to break (ie ipcs). Some applications require getting the procfs info (without root privileges) and can be rather slow in comparison with a syscall -- up to 500x in some reported cases. This patch introduces a new SHM_STAT_ANY command such that the shm ipc object permissions are ignored, and only audited instead. In addition, I've left the lsm security hook checks in place, as if some policy can block the call, then the user has no other choice than just parsing the procfs file. [1] https://lkml.org/lkml/2017/12/19/220 Link: http://lkml.kernel.org/r/20180215162458.10059-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Robert Kettler <robert.kettler@outlook.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
edc41b3 kernel/params.c: downgrade warning for unsafe parameters As using an unsafe module parameter is, by its very definition, an expected user action, emitting a warning is overkill. Nothing has yet gone wrong, and we add a taint flag for any future oops should something actually go wrong. So instead of having a user controllable pr_warn, downgrade it to a pr_notice for "a normal, but significant condition". We make use of unsafe kernel parameters in igt (https://cgit.freedesktop.org/drm/igt-gpu-tools/) (we have not yet succeeded in removing all such debugging options), which generates a warning and taints the kernel. The warning is unhelpful as we then need to filter it out again as we check that every test themselves do not provoke any kernel warnings. Link: http://lkml.kernel.org/r/20180226151919.9674-1-chris@chris-wilson.co.uk Fixes: 91f9d330cc14 ("module: make it possible to have unsafe, tainting module params") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jean Delvare <khali@linux-fr.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
2d87b30 kernel/sysctl.c: fix sizeof argument to match variable name Fix sizeof argument to be the same as the data variable name. Probably a copy/paste error. Mostly harmless since both variables are unsigned int. Fixes kernel bugzilla #197371: Possible access to unintended variable in "kernel/sysctl.c" line 1339 https://bugzilla.kernel.org/show_bug.cgi?id=197371 Link: http://lkml.kernel.org/r/e0d0531f-361e-ef5f-8499-32743ba907e1@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Petru Mihancea <petrum@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
bbd876a rapidio: use a reference count for struct mport_dma_req Once the dma request is passed to the DMA engine, the DMA subsystem would hold a pointer to this structure and could call the completion callback after do_dma_request() has timed out. The current code deals with this by putting timed out SYNC requests to a pending list and freeing them later, when the mport cdev device is released. This still does not guarantee that the DMA subsystem is really done with those transfers, so in theory dma_xfer_callback/dma_req_free could be called after mport_cdev_release_dma and could potentially access already freed memory. This patch simplifies the current handling by using a kref in the mport dma request structure, so that it gets freed only when nobody uses it anymore. This also simplifies the code a bit, as FAF transfers are now handled in the same way as SYNC and ASYNC transfers. There is no need anymore for the pending list and for the dma workqueue which was used in case of FAF transfers, so we remove them both. Link: http://lkml.kernel.org/r/20180405203342.GA16191@nokia.com Signed-off-by: Ioan Nicu <ioan.nicu.ext@nokia.com> Acked-by: Alexandre Bounine <alex.bou9@gmail.com> Cc: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Frank Kunz <frank.kunz@nokia.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
b94bb1f drivers/rapidio/rio-scan.c: fix typo in comment Fix typo in the words 'receiver', 'specified', 'during' Link: http://lkml.kernel.org/r/20180321211035.8904-1-gomonovych@gmail.com Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
c31dbb1 exec: pin stack limit during exec Since the stack rlimit is used in multiple places during exec and it can be changed via other threads (via setrlimit()) or processes (via prlimit()), the assumption that the value doesn't change cannot be made. This leads to races with mm layout selection and argument size calculations. This changes the exec path to use the rlimit stored in bprm instead of in current. Before starting the thread, the bprm stack rlimit is stored back to current. Link: http://lkml.kernel.org/r/1518638796-20819-4-git-send-email-keescook@chromium.org Fixes: 64701dee4178e ("exec: Use sane stack rlimit under secureexec") Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by: Andy Lutomirski <luto@kernel.org> Reported-by: Brad Spengler <spender@grsecurity.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Greg KH <greg@kroah.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
b838383 exec: introduce finalize_exec() before start_thread() Provide a final callback into fs/exec.c before start_thread() takes over, to handle any last-minute changes, like the coming restoration of the stack limit. Link: http://lkml.kernel.org/r/1518638796-20819-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Cc: Greg KH <greg@kroah.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
8f2af15 exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:37 UTC
d64d01a seq_file: account everything to kmemcg All it takes to open a file and read 1 byte from it. seq_file will be allocated along with any private allocations, and more importantly seq file buffer which is 1 page by default. Link: http://lkml.kernel.org/r/20180310085252.GB17121@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Glauber Costa <glommer@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
0965232 seq_file: allocate seq_file from kmem_cache For fine-grained debugging and usercopy protection. Link: http://lkml.kernel.org/r/20180310085027.GA17121@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Glauber Costa <glommer@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
9ad553a fs/reiserfs/journal.c: add missing resierfs_warning() arg One use of the reiserfs_warning() macro in journal_init_dev() is missing a parameter, causing the following warning: REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev: This also causes a WARN_ONCE() warning in the vsprintf code, and then a panic if panic_on_warn is set. Please remove unsupported %/ in format string WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138 Kernel panic - not syncing: panic_on_warn set ... Just add another string argument to the macro invocation. Addresses https://syzkaller.appspot.com/bug?id=0627d4551fdc39bf1ef5d82cd9eef587047f7718 Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jeff Mahoney <jeffm@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
ad12c3a autofs4: use wait_event_killable This playing with signals to allow only fatal signals appears to predate the introduction of wait_event_killable(), and I'm fairly sure that wait_event_killable is what was meant to happen here. [avagin@openvz.org: use wake_up() instead of wake_up_interruptible] Link: http://lkml.kernel.org/r/20180331022839.21277-1-avagin@openvz.org Link: http://lkml.kernel.org/r/20180319191609.23880-1-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Ian Kent <raven@themaw.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
1a6a05a init/ramdisk: use pr_cont() at the end of ramdisk loading Use pr_cont() at the end of ramdisk loading. This will avoid the rotator and an extra newline appearing in the dmesg. Before: RAMDISK: Loading 2436KiB [1 disk] into ram disk... | done. After: RAMDISK: Loading 2436KiB [1 disk] into ram disk... done. Link: http://lkml.kernel.org/r/20180302205552.16031-1-aaro.koskinen@iki.fi Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
5d43090 checkpatch: whinge about bool bitfields Using bool in a bitfield isn't a good idea as the alignment behavior is arch implementation defined. Suggest using unsigned int or u<8|16|32> instead. Link: http://lkml.kernel.org/r/e22fb871b1b7f2fda4b22f3a24e0d7f092eb612c.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
38dca98 checkpatch: allow space between colon and bracket Allow a space between a colon and subsequent opening bracket. This sequence may occur in inline assembler statements like asm( "ldr %[out], [%[in]]\n\t" : [out] "=r" (ret) : [in] "r" (addr) ); Link: http://lkml.kernel.org/r/20180403191655.23700-1-xypron.glpk@gmx.de Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
6a48721 checkpatch: add test for assignment at start of line Kernel style seems to prefer line wrapping an assignment with the assignment operator on the previous line like: <leading tabs> identifier = expression; over <leading tabs> identifier = expression; somewhere around a 50:1 ratio $ git grep -P "[^=]=\s*$" -- "*.[ch]" | wc -l 52008 $ git grep -P "^\s+[\*\/\+\|\%\-]?=[^=>]" | wc -l 1161 So add a --strict test for that condition. Link: http://lkml.kernel.org/r/1522275726.2210.12.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
bc22d9a checkpatch: test SYMBOLIC_PERMS multiple times per line There are occasions where symbolic perms are used in a ternary like return (channel == 0) ? S_IRUGO | S_IWUSR : S_IRUGO; The current test will find the first use "S_IRUGO | S_IWUSR" but not the second use "S_IRUGO" on the same line. Improve the test to look for all instances on a line. Link: http://lkml.kernel.org/r/1522127944.12357.49.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
8d2e11b checkpatch: two spelling fixes completly -> completely wacking -> whacking Link: http://lkml.kernel.org/r/1520405394-5586-1-git-send-email-claudio.fontana@gliwa.com Signed-off-by: Claudio Fontana <claudio.fontana@gliwa.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
478b179 checkpatch: improve get_quoted_string for TRACE_EVENT macros The get_quoted_string function does not expect invalid arguments. The $stat test can return non-statements for complicated macros like TRACE_EVENT. Allow the $stat block and test for vsprintf misuses to exceed the actual block length and possibly test invalid lines by validating the arguments of get_quoted_string. Return "" if either get_quoted_string argument is undefined. Miscellanea: o Properly align the comment for the vsprintf extension test Link: http://lkml.kernel.org/r/9e9725342ca3dfc0f5e3e0b8ca3c482b0e5712cc.1520356392.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
e3c6bc9 checkpatch: warn for use of %px Usage of the new %px specifier potentially leaks sensitive information. Printing kernel addresses exposes the kernel layout in memory, this is potentially exploitable. We have tools in the kernel to help us do the right thing. We can have checkpatch warn developers of potential dangers of using %px. Have checkpatch emit a warning for usage of specifier %px. Link: http://lkml.kernel.org/r/1519700648-23108-5-git-send-email-me@tobin.cc Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
e3d95a2 checkpatch: add sub routine get_stat_here() checkpatch currently contains duplicate code. We can define a sub routine and call that instead. This reduces code duplication and line count. Add subroutine get_stat_here(). Link: http://lkml.kernel.org/r/1519700648-23108-4-git-send-email-me@tobin.cc Signed-off-by: Tobin C. Harding <me@tobin.cc> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
c2066ca checkpatch: remove unused variable declarations Variables are declared and not used, we should remove them. Link: http://lkml.kernel.org/r/1519700648-23108-3-git-send-email-me@tobin.cc Signed-off-by: Tobin C. Harding <me@tobin.cc> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:36 UTC
2a9f9d8 checkpatch: add sub routine get_stat_real() checkpatch currently contains duplicate code. We can define a sub routine and call that instead. This reduces code duplication and line count. Add subroutine get_stat_real() Link: http://lkml.kernel.org/r/1519700648-23108-2-git-send-email-me@tobin.cc Signed-off-by: Tobin C. Harding <me@tobin.cc> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
3d102fc checkpatch: add Crypto ON_STACK to declaration_macros Add the crypto API *_ON_STACK to $declaration_macros. Resolves the following false warning: WARNING: Missing a blank line after declarations + int err; + SHASH_DESC_ON_STACK(desc, ctx_p->shash_tfm); Link: http://lkml.kernel.org/r/1518941636-4484-1-git-send-email-gilad@benyossef.com Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
9f3a899 checkpatch.pl: add SPDX license tag check Add SPDX license tag check based on the rules defined in Documentation/process/license-rules.rst. To summarize, SPDX license tags should be on the 1st line (or 2nd line in scripts) using the appropriate comment style for the file type. Link: http://lkml.kernel.org/r/20180202154026.15298-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Igor Stoppa <igor.stoppa@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
85e1206 checkpatch: improve parse_email signature checking Bare email addresses with non alphanumeric characters require escape quoting before being substituted in the parse_email routine. e.g. Reported-by: syzbot+bbd8e9a06452cc48059b@syzkaller.appspotmail.com Do so. Link: http://lkml.kernel.org/r/1518631805.3678.12.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
68c1f08 lib/list_debug.c: print unmangled addresses The entire point of printing the pointers in list_debug is to see if there's any useful information in them (eg poison values, ASCII, etc); obscuring them to see if they compare equal makes them much less useful. If an attacker can force this message to be printed, we've already lost. Link: http://lkml.kernel.org/r/20180401223237.GV13332@bombadil.infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Tobin C. Harding <me@tobin.cc> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
3175060 lib/test_ubsan.c: make test_ubsan_misaligned_access() static test_ubsan_misaligned_access() is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: lib/test_ubsan.c:91:6: warning: symbol 'test_ubsan_misaligned_access' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20180313103048.28513-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
854686f lib: add testing module for UBSAN This is a test module for UBSAN. It triggers all undefined behaviors that linux supports now, and detect them. All test-cases have passed by compiling with gcc-5.5.0. If use gcc-4.9.x, misaligned, out-of-bounds, object-size-mismatch will not be detected. Because gcc-4.9.x doesn't support them. Link: http://lkml.kernel.org/r/20180309102247.GA2944@pjb1027-Latitude-E5410 Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
f6f66c1 lib/test_bitmap.c: do not accidentally use stack VLA This avoids an accidental stack VLA (since the compiler thinks the value of "len" can change, even when marked "const"). This just replaces it with a #define so it will DTRT. Seen with -Wvla. Fixed as part of the directive to remove all VLAs from the kernel: https://lkml.org/lkml/2018/3/7/621 Link: http://lkml.kernel.org/r/20180307212555.GA17927@beast Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
5f00ae0 lib/Kconfig.debug: Debug Lockups and Hangs: keep SOFTLOCKUP options together Keep all of the SOFTLOCKUP kconfig symbols together (instead of injecting the HARDLOCKUP symbols in the midst of them) so that the config tools display them with their dependencies. Tested with 'make {menuconfig/nconfig/gconfig/xconfig}'. Link: http://lkml.kernel.org/r/6be2d9ed-4656-5b94-460d-7f051e2c7570@infradead.org Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
d387a31 MAINTAINERS: update email address for Alexandre Bounine Link: http://lkml.kernel.org/r/1522958149-6157-1-git-send-email-alex.bou9@gmail.com Signed-off-by: Alexandre Bounine <alex.bou9@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
2cfe0d3 task_struct: only use anon struct under randstruct plugin The original intent for always adding the anonymous struct in task_struct was to make sure we had compiler coverage. However, this caused pathological padding of 40 bytes at the start of task_struct. Instead, move the anonymous struct to being only used when struct layout randomization is enabled. Link: http://lkml.kernel.org/r/20180327213609.GA2964@beast Fixes: 29e48ce87f1e ("task_struct: Allow randomized") Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
d4ef8d3 clang-format: add configuration file clang-format is a tool to format C/C++/... code according to a set of rules and heuristics. Like most tools, it is not perfect nor covers every single case, but it is good enough to be helpful. In particular, it is useful for quickly re-formatting blocks of code automatically, for reviewing full files in order to spot coding style mistakes, typos and possible improvements. It is also handy for sorting ``#includes``, for aligning variables and macros, for reflowing text and other similar tasks. It also serves as a teaching tool/guide for newcomers. The tool itself has been already included in the repositories of popular Linux distributions for a long time. The rules in this file are intended for clang-format >= 4, which is easily available in most distributions. This commit adds the configuration file that contains the rules that the tool uses to know how to format the code according to the kernel coding style. This gives us several advantages: * clang-format works out of the box with reasonable defaults; avoiding that everyone has to re-do the configuration. * Everyone agrees (eventually) on what is the most useful default configuration for most of the kernel. * If it becomes commonplace among kernel developers, clang-format may feel compelled to support us better. They already recognize the Linux kernel and its style in their documentation and in one of the style sub-options. Some of clang-format's features relevant for the kernel are: * Uses clang's tooling support behind the scenes to parse and rewrite the code. It is not based on ad-hoc regexps. * Supports reasonably well the Linux kernel coding style. * Fast enough to be used at the press of a key. * There are already integrations (either built-in or third-party) for many common editors used by kernel developers (e.g. vim, emacs, Sublime, Atom...) that allow you to format an entire file or, more usefully, just your selection. * Able to parse unified diffs -- you can, for instance, reformat only the lines changed by a git commit. * Able to reflow text comments as well. * Widely supported and used by hundreds of developers in highly complex projects and organizations (e.g. the LLVM project itself, Chromium, WebKit, Google, Mozilla...). Therefore, it will be supported for a long time. See more information about the tool at: https://clang.llvm.org/docs/ClangFormat.html https://clang.llvm.org/docs/ClangFormatStyleOptions.html Link: http://lkml.kernel.org/r/20180318171632.qfkemw3mwbcukth6@gmail.com Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
3ea056c uts: create "struct uts_namespace" from kmem_cache So "struct uts_namespace" can enjoy fine-grained SLAB debugging and usercopy protection. I'd prefer shorter name "utsns" but there is "user_namespace" already. Link: http://lkml.kernel.org/r/20180228215158.GA23146@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 April 2018, 17:28:35 UTC
back to top