Skip to main content

Browse the archive

https://github.com/torvalds/linux
13 June 2022, 11:31:42 UTC
sort by:
Revision Author Date Message Commit Date
b0d78ee Linus Torvalds 16 December 2011, 18:05:14 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block * 'for-linus' of git://git.kernel.dk/linux-block: block: don't kick empty queue in blk_drain_queue() block/swim3: Locking fixes loop: Fix discard_alignment default setting cfq-iosched: fix cfq_cic_link() race confition cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails cciss: fix flush cache transfer length cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler loop: fix loop block driver discard and encryption comment block: initialize request_queue's numa node during 16 December 2011, 18:05:14 UTC
6f12d2e Linus Torvalds 15 December 2011, 22:16:47 UTC Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: ibft: Fix finding IBFT ACPI table on UEFI 15 December 2011, 22:16:47 UTC
88703f2 Linus Torvalds 15 December 2011, 22:15:01 UTC Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8712u: Add new USB ID staging: tidspbridge: request dmtimer clocks on init staging: tidspbridge: include module.h by default 15 December 2011, 22:15:01 UTC
f242bbc Linus Torvalds 15 December 2011, 22:14:41 UTC Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: option: Removing one bogus and adding some new Huawei combinations USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. usb: option: Add Huawei E398 controlling interfaces usb: renesas_usbhs: add hcd->has_tt for low/full speed usb: renesas_usbhs: typofix: irq_dtch control DTCHE usb: gadget: storage: release superspeed descriptors. 15 December 2011, 22:14:41 UTC
ddf5a25 Uwe Kleine-König 15 December 2011, 20:47:56 UTC ARM: unwinder: fix bisection to find origin in .idx section The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2011, 22:02:19 UTC
4eabc94 Tejun Heo 15 December 2011, 19:03:04 UTC block: don't kick empty queue in blk_drain_queue() While probing, fd sets up queue, probes hardware and tears down the queue if probing fails. In the process, blk_drain_queue() kicks the queue which failed to finish initialization and fd is unhappy about that. floppy0: no floppy controllers found ------------[ cut here ]------------ WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0() Hardware name: To Be Filled By O.E.M. VFS: do_fd_request called on non-open device Modules linked in: Pid: 1, comm: swapper Not tainted 3.2.0-rc4-00077-g5983fe2 #2 Call Trace: [<ffffffff81039a6a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff81039b41>] warn_slowpath_fmt+0x41/0x50 [<ffffffff813d657f>] do_fd_request+0xbf/0xd0 [<ffffffff81322b95>] blk_drain_queue+0x65/0x80 [<ffffffff81322c93>] blk_cleanup_queue+0xe3/0x1a0 [<ffffffff818a809d>] floppy_init+0xdeb/0xe28 [<ffffffff818a72b2>] ? daring+0x6b/0x6b [<ffffffff810002af>] do_one_initcall+0x3f/0x170 [<ffffffff81884b34>] kernel_init+0x9d/0x11e [<ffffffff810317c2>] ? schedule_tail+0x22/0xa0 [<ffffffff815dbb14>] kernel_thread_helper+0x4/0x10 [<ffffffff81884a97>] ? start_kernel+0x2be/0x2be [<ffffffff815dbb10>] ? gs_change+0xb/0xb Avoid it by making blk_drain_queue() kick queue iff dispatch queue has something on it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Tested-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 15 December 2011, 19:03:04 UTC
42ebfc6 Linus Torvalds 15 December 2011, 18:52:40 UTC Merge branch 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/swiotlb: Use page alignment for early buffer allocation. xen: only limit memory map to maximum reservation for domain 0. 15 December 2011, 18:52:40 UTC
63a7417 Konrad Rzeszutek Wilk 15 December 2011, 16:28:46 UTC xen/swiotlb: Use page alignment for early buffer allocation. This fixes an odd bug found on a Dell PowerEdge 1850/0RC130 (BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask would fail with: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: can't derive routing for PCI INT A ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO The issue was the Xen-SWIOTLB was allocated such as that the end of buffer was stradling a page (and also above 4GB). The fix was spotted by Kalev Leonid which was to piggyback on git commit e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment for early buffer allocation" which: We could call free_bootmem_late() if swiotlb is not used, and it will shrink to page alignment. So alloc them with page alignment at first, to avoid lose two pages And doing that fixes the outstanding issue. CC: stable@kernel.org Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com> Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 15 December 2011, 16:28:46 UTC
d3db728 Ian Campbell 14 December 2011, 12:16:08 UTC xen: only limit memory map to maximum reservation for domain 0. d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set <domain> 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: stable@kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 15 December 2011, 16:24:02 UTC
55b02d2 Linus Torvalds 15 December 2011, 03:45:40 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: add some new pci ids 15 December 2011, 03:45:40 UTC
2240a7b Linus Torvalds 15 December 2011, 02:25:58 UTC Merge tag 'tytso-for-linus-20111214' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * tag 'tytso-for-linus-20111214' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: handle EOF correctly in ext4_bio_write_page() ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers() ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize ext4: avoid hangs in ext4_da_should_update_i_disksize() ext4: display the correct mount option in /proc/mounts for [no]init_itable ext4: Fix crash due to getting bogus eh_depth value on big-endian systems ext4: fix ext4_end_io_dio() racing against fsync() .. using the new signed tag merge of git that now verifies the gpg signature automatically. Yay. The branchname was just 'dev', which is prettier. I'll tell Ted to use nicer tag names for future cases. 15 December 2011, 02:25:58 UTC
30aaca4 Linus Torvalds 15 December 2011, 02:23:35 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: llseek fix race fuse: fix llseek bug fuse: fix fuse_retrieve 15 December 2011, 02:23:35 UTC
ddb3607 Linus Torvalds 15 December 2011, 02:22:55 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/ncpfs: fix error paths and goto statements in ncp_fill_super() configfs: register_filesystem() called too early fuse: register_filesystem() called too early ubifs: too early register_filesystem() ... and the same kind of leak for mqueue procfs: fix a vfsmount longterm reference leak 15 December 2011, 02:22:55 UTC
cd5cfce Alex Deucher 12 December 2011, 14:23:48 UTC drm/radeon/kms: add some new pci ids Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43739 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 14 December 2011, 12:29:03 UTC
759c361 Djalal Harouni 13 December 2011, 01:47:29 UTC fs/ncpfs: fix error paths and goto statements in ncp_fill_super() The label 'out_bdi' should be followed by bdi_destroy() instead of fput() which should be after the 'out_fput' label. If bdi_setup_and_register() fails then jump to the 'out_fput' label instead of the 'out_bdi' one. If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi' label to call bdi_destroy() otherwise the bdi object will not be destroyed. Compile tested only. Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 14 December 2011, 05:45:33 UTC
5a0dc73 Yongqiang Yang 14 December 2011, 03:29:12 UTC ext4: handle EOF correctly in ext4_bio_write_page() We need to zero out part of a page which beyond EOF before setting uptodate, otherwise, mapread or write will see non-zero data beyond EOF. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 14 December 2011, 03:29:12 UTC
5b5ffa4 Yongqiang Yang 14 December 2011, 03:13:42 UTC ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater than ee_block + ee_len. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 14 December 2011, 03:13:42 UTC
093e6e3 Yongqiang Yang 14 December 2011, 03:05:05 UTC ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers() If a page has been read into memory and never been written, it has no buffers, but we should handle the page in truncate or punch hole. VFS code of writing operations has handled holes correctly, so this patch removes the code handling holes in writing operations. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 14 December 2011, 03:05:05 UTC
13a79a4 Yongqiang Yang 14 December 2011, 02:51:55 UTC ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize If there is an unwritten but clean buffer in a page and there is a dirty buffer after the buffer, then mpage_submit_io does not write the dirty buffer out. As a result, da_writepages loops forever. This patch fixes the problem by checking dirty flag. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 14 December 2011, 02:51:55 UTC
ea51d13 Andrea Arcangeli 14 December 2011, 02:41:15 UTC ext4: avoid hangs in ext4_da_should_update_i_disksize() If the pte mapping in generic_perform_write() is unmapped between iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the "copied" parameter to ->end_write can be zero. ext4 couldn't cope with it with delayed allocations enabled. This skips the i_disksize enlargement logic if copied is zero and no new data was appeneded to the inode. gdb> bt #0 0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\ 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467 #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 #2 0xffffffff810d97f1 in generic_perform_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value o\ ptimized out>, pos=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2440 #3 generic_file_buffered_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value optimized out>, p\ os=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2482 #4 0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\ xffff88001e26be40) at mm/filemap.c:2600 #5 0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=<value optimi\ zed out>, pos=<value optimized out>) at mm/filemap.c:2632 #6 0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\ t fs/ext4/file.c:136 #7 0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=<value optimized out>, len=<value optimized out>, \ ppos=0xffff88001e26bf48) at fs/read_write.c:406 #8 0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x4\ 000, pos=0xffff88001e26bf48) at fs/read_write.c:435 #9 0xffffffff8113816c in sys_write (fd=<value optimized out>, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x\ 4000) at fs/read_write.c:487 #10 <signal handler called> #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ () #12 0x0000000000000000 in ?? () gdb> print offset $22 = 0xffffffffffffffff gdb> print idx $23 = 0xffffffff gdb> print inode->i_blkbits $24 = 0xc gdb> up #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 2512 if (ext4_da_should_update_i_disksize(page, end)) { gdb> print start $25 = 0x0 gdb> print end $26 = 0xffffffffffffffff gdb> print pos $27 = 0x108000 gdb> print new_i_size $28 = 0x108000 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize $29 = 0xd9000 gdb> down 2467 for (i = 0; i < idx; i++) gdb> print i $30 = 0xd44acbee This is 100% reproducible with some autonuma development code tuned in a very aggressive manner (not normal way even for knumad) which does "exotic" changes to the ptes. It wouldn't normally trigger but I don't see why it can't happen normally if the page is added to swap cache in between the two faults leading to "copied" being zero (which then hangs in ext4). So it should be fixed. Especially possible with lumpy reclaim (albeit disabled if compaction is enabled) as that would ignore the young bits in the ptes. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 14 December 2011, 02:41:15 UTC
c7caf4d Larry Finger 11 December 2011, 16:27:54 UTC staging: r8712u: Add new USB ID Add USB ID for Sitecom WLA-2000 v1.001 WLAN. Reported-and-tested-by: Roland Gruber <post@rolandgruber.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 14 December 2011, 00:13:15 UTC
ed625b9 Omar Ramirez Luna 18 November 2011, 22:18:54 UTC staging: tidspbridge: request dmtimer clocks on init Given that dm timer framework doesn't support request of clocks by soft | hard irqs because some recent changes, tidspbridge needs to request its clocks on init and enable/disable them on demand. This was first seen on 3.2-rc1. Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 14 December 2011, 00:12:06 UTC
0a7e22e Omar Ramirez Luna 15 November 2011, 02:16:57 UTC staging: tidspbridge: include module.h by default Fixes compilation break when compiled as part of the kernel: drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe': drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function) drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.) Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 14 December 2011, 00:11:37 UTC
373da0a Linus Torvalds 13 December 2011, 23:02:31 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware 13 December 2011, 23:02:31 UTC
653f42f Linus Torvalds 13 December 2011, 22:59:42 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: add missing spin_unlock at ceph_mdsc_build_path() ceph: fix SEEK_CUR, SEEK_SET regression crush: fix mapping calculation when force argument doesn't exist ceph: use i_ceph_lock instead of i_lock rbd: remove buggy rollback functionality rbd: return an error when an invalid header is read ceph: fix rasize reporting by ceph_show_options 13 December 2011, 22:59:42 UTC
4dde6de Linus Torvalds 13 December 2011, 22:58:56 UTC Merge branch 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: set max_pause to lowest value on zero bdi_dirty writeback: permit through good bdi even when global dirty exceeded writeback: comment on the bdi dirty threshold fs: Make write(2) interruptible by a fatal signal writeback: Fix issue on make htmldocs 13 December 2011, 22:58:56 UTC
9d5a09e Yehuda Sadeh 13 December 2011, 17:57:44 UTC ceph: add missing spin_unlock at ceph_mdsc_build_path() one of the paths was missing spin_unlock Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> 13 December 2011, 19:59:53 UTC
02a551c Bjørn Mork 13 December 2011, 04:33:02 UTC USB: option: Removing one bogus and adding some new Huawei combinations Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 13 December 2011, 17:46:01 UTC
7c6455e Al Viro 13 December 2011, 17:32:42 UTC configfs: register_filesystem() called too early Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 December 2011, 17:35:15 UTC
988f032 Al Viro 13 December 2011, 17:25:27 UTC fuse: register_filesystem() called too early same story as with ubifs Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 December 2011, 17:35:14 UTC
5cc361e Al Viro 13 December 2011, 04:58:21 UTC ubifs: too early register_filesystem() doing that before you are ready to handle mount() is a Bad Idea(tm)... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 December 2011, 17:35:13 UTC
442ee5a Linus Torvalds 13 December 2011, 17:28:23 UTC Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs ARM: 7187/1: fix unwinding for XIP kernels ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU 13 December 2011, 17:28:23 UTC
6a82c47 Sage Weil 13 December 2011, 17:19:26 UTC ceph: fix SEEK_CUR, SEEK_SET regression Commit 06222e491e663dac939f04b125c9dc52126a75c4 got the if wrong so that it always evaluates as true. This is semantically harmless, but makes SEEK_CUR and SEEK_SET needlessly query the server. Rewrite the if to explicitly enumerate the cases we DO need a valid i_size to make this code less fragile. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net> 13 December 2011, 17:19:26 UTC
935a9fe Yinghai Lu 12 December 2011, 20:39:14 UTC ibft: Fix finding IBFT ACPI table on UEFI Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> 13 December 2011, 14:08:31 UTC
73104b6 Miklos Szeredi 13 December 2011, 10:40:59 UTC fuse: llseek fix race Fix race between lseek(fd, 0, SEEK_CUR) and read/write. This was fixed in generic code by commit 5b6f1eb97d (vfs: lseek(fd, 0, SEEK_CUR) race condition). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 13 December 2011, 10:40:59 UTC
b48c6af Roel Kluin 13 December 2011, 09:37:00 UTC fuse: fix llseek bug The test in fuse_file_llseek() "not SEEK_CUR or not SEEK_SET" always evaluates to true. This was introduced in 3.1 by commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek) and changed the behavior of SEEK_CUR and SEEK_SET to always retrieve the file attributes. This is a performance regression. Fix the test so that it makes sense. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org CC: Josef Bacik <josef@redhat.com> CC: Al Viro <viro@zeniv.linux.org.uk> 13 December 2011, 09:37:00 UTC
48706d0 Miklos Szeredi 13 December 2011, 09:36:59 UTC fuse: fix fuse_retrieve Fix two bugs in fuse_retrieve(): - retrieving more than one page would yield repeated instances of the first page - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the request page array would overflow fuse_retrieve() was added in 2.6.36 and these bugs had been there since the beginning. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org 13 December 2011, 09:36:59 UTC
13c07b0 Linus Torvalds 13 December 2011, 06:06:55 UTC linux/log2.h: Fix rounddown_pow_of_two(1) Exactly like roundup_pow_of_two(1), the rounddown version was buggy for the case of a compile-time constant '1' argument. Probably because it originated from the same code, sharing history with the roundup version from before the bugfix (for that one, see commit 1a06a52ee1b0: "Fix roundup_pow_of_two(1)"). However, unlike the roundup version, the fix for rounddown is to just remove the broken special case entirely. It's simply not needed - the generic code 1UL << ilog2(n) does the right thing for the constant '1' argment too. The only reason roundup needed that special case was because rounding up does so by subtracting one from the argument (and then adding one to the result) causing the obvious problems with "ilog2(0)". But rounddown doesn't do any of that, since ilog2() naturally truncates (ie "rounds down") to the right rounded down value. And without the ilog2(0) case, there's no reason for the special case that had the wrong value. tl;dr: rounddown_pow_of_two(1) should be 1, not 0. Acked-by: Dmitry Torokhov <dtor@vmware.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 December 2011, 06:06:55 UTC
12870da Linus Torvalds 13 December 2011, 04:08:27 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jz4740) Staticise jz4740_hwmon_driver hwmon: (jz4740) fix signedness bug 13 December 2011, 04:08:27 UTC
71fe5cc Linus Torvalds 13 December 2011, 04:06:13 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc: sdhci-s3c: Remove old and misprototyped suspend operations mmc: tmio: fix clock gating on platforms with a .set_pwr() method mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method mmc: core: Fix typo at mmc_card_sleep mmc: core: Fix power_off_notify during suspend mmc: core: Fix setting power notify state variable for non-eMMC mmc: core: Add quirk for long data read time mmc: Add module.h include to sdhci-cns3xxx.c mmc: mxcmmc: fix falling back to PIO mmc: omap_hsmmc: DMA unmap only once in case of MMC error 13 December 2011, 04:06:13 UTC
fc6cb1c Theodore Ts'o 13 December 2011, 03:06:18 UTC ext4: display the correct mount option in /proc/mounts for [no]init_itable /proc/mounts was showing the mount option [no]init_inode_table when the correct mount option that will be accepted by parse_options() is [no]init_itable. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 13 December 2011, 03:06:18 UTC
6abff5d Krzysztof Hałasa 12 December 2011, 13:51:00 UTC USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 December 2011, 22:31:33 UTC
414b591 Alex Hermann 12 December 2011, 20:42:23 UTC usb: option: Add Huawei E398 controlling interfaces This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork <bjorn@mork.no> for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann <alex@wenlex.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 December 2011, 22:31:32 UTC
e1ad783 Keith Packard 12 December 2011, 00:12:42 UTC Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console Signed-off-by: Ingo Molnar <mingo@elte.hu> 12 December 2011, 17:25:56 UTC
f1932fc Sage Weil 07 December 2011, 17:10:26 UTC crush: fix mapping calculation when force argument doesn't exist If the force argument isn't valid, we should continue calculating a mapping as if it weren't specified. Signed-off-by: Sage Weil <sage@newdream.net> 12 December 2011, 17:09:45 UTC
d6c4f2a Axel Lin 08 December 2011, 13:33:37 UTC hwmon: (jz4740) Staticise jz4740_hwmon_driver It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 12 December 2011, 16:31:21 UTC
0b57d76 Axel Lin 08 December 2011, 13:04:12 UTC hwmon: (jz4740) fix signedness bug wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@kernel.org (3.0+) Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 12 December 2011, 16:31:21 UTC
b4611ab Paul Mackerras 12 December 2011, 16:00:56 UTC ext4: Fix crash due to getting bogus eh_depth value on big-endian systems Commit 1939dd84b3 ("ext4: cleanup ext4_ext_grow_indepth code") added a reference to ext4_extent_header.eh_depth, but forget to pass the value read through le16_to_cpu. The result is a crash on big-endian machines, such as this crash on a POWER7 server: attempt to access beyond end of device sda8: rw=0, want=776392648163376, limit=168558560 Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb Faulting instruction address: 0xc0000000001f5f38 cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0] pc: c0000000001f5f38: .__brelse+0x18/0x60 lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80 sp: c000001bd1aaef70 msr: 9000000000009032 dar: 6b6b6b6b6b6b6bcb dsisr: 40000000 current = 0xc000001bd15b8010 paca = 0xc00000000ffe4600 pid = 19911, comm = flush-8:0 enter ? for help [c000001bd1aaeff0] c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80 [c000001bd1aaf090] c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0 [c000001bd1aaf180] c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0 [c000001bd1aaf2c0] c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710 [c000001bd1aaf420] c0000000002b2974 .ext4_map_blocks+0x224/0x310 [c000001bd1aaf4d0] c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490 [c000001bd1aaf5a0] c0000000002b8688 .write_cache_pages_da+0x2c8/0x430 [c000001bd1aaf720] c0000000002b8b28 .ext4_da_writepages+0x338/0x670 [c000001bd1aaf8d0] c000000000157280 .do_writepages+0x40/0x90 [c000001bd1aaf940] c0000000001ea830 .writeback_single_inode+0xe0/0x530 [c000001bd1aafa00] c0000000001eb680 .writeback_sb_inodes+0x210/0x300 [c000001bd1aafb20] c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140 [c000001bd1aafbe0] c0000000001ebfec .wb_writeback+0x2fc/0x3e0 [c000001bd1aafce0] c0000000001ed770 .wb_do_writeback+0x2f0/0x300 [c000001bd1aafdf0] c0000000001ed848 .bdi_writeback_thread+0xc8/0x340 [c000001bd1aafed0] c0000000000c5494 .kthread+0xb4/0xc0 [c000001bd1aaff90] c000000000021f48 .kernel_thread+0x54/0x70 This is due to getting ext_depth(inode) == 0x101 and therefore running off the end of the path array in ext4_ext_drop_refs into following unallocated structures. This fixes it by adding the necessary le16_to_cpu. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 12 December 2011, 16:00:56 UTC
b5a7e97 Theodore Ts'o 12 December 2011, 15:53:02 UTC ext4: fix ext4_end_io_dio() racing against fsync() We need to make sure iocb->private is cleared *before* we put the io_end structure on i_completed_io_list. Otherwise fsync() could potentially run on another CPU and free the iocb structure out from under us. Reported-by: Kent Overstreet <koverstreet@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 12 December 2011, 15:53:02 UTC
b302545 Benjamin Herrenschmidt 12 December 2011, 11:42:12 UTC block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 12 December 2011, 11:42:12 UTC
1115b9e Kuninori Morimoto 09 December 2011, 02:24:47 UTC usb: renesas_usbhs: add hcd->has_tt for low/full speed Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 12 December 2011, 10:24:42 UTC
b95eb74 Kuninori Morimoto 09 December 2011, 02:23:56 UTC usb: renesas_usbhs: typofix: irq_dtch control DTCHE Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 12 December 2011, 10:24:34 UTC
f44b915 Yu Xu 09 December 2011, 16:03:33 UTC usb: gadget: storage: release superspeed descriptors. Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu <yuxu@marvell.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 12 December 2011, 10:24:07 UTC
9811ccd Arnaud Patard 11 December 2011, 19:32:25 UTC ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 11 December 2011, 22:42:01 UTC
49df780 Sujit Reddy Thumma 23 November 2011, 03:13:18 UTC mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:39 UTC
524bfca Mark Brown 21 November 2011, 18:00:51 UTC mmc: sdhci-s3c: Remove old and misprototyped suspend operations Now that the driver is using dev_pm_ops the suspend operations in the platform_driver structure won't get called so don't need to be there, and certainly shouldn't be the same function as dev_pm_ops since the signatures are different. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:39 UTC
f6b8b52 Guennadi Liakhovetski 16 November 2011, 09:11:45 UTC mmc: tmio: fix clock gating on platforms with a .set_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the SDHI functionality on ecovec. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:38 UTC
f6bc41f Guennadi Liakhovetski 16 November 2011, 09:10:41 UTC mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the MMCIF interface functionality on ecovec boards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:37 UTC
c99872a Kyungmin Park 17 November 2011, 04:34:33 UTC mmc: core: Fix typo at mmc_card_sleep Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:37 UTC
a80f162 Girish K S 15 November 2011, 06:25:46 UTC mmc: core: Fix power_off_notify during suspend The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:36 UTC
96a85d5 Girish K S 04 November 2011, 10:52:47 UTC mmc: core: Fix setting power notify state variable for non-eMMC This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:36 UTC
6de5fc9 Stefan Nilsson XK 03 November 2011, 08:44:12 UTC mmc: core: Add quirk for long data read time Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:35 UTC
7833c66 Chris Ball 12 November 2011, 00:54:53 UTC mmc: Add module.h include to sdhci-cns3xxx.c Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:35 UTC
e58f516 Sascha Hauer 11 November 2011, 15:28:05 UTC mmc: mxcmmc: fix falling back to PIO When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 10 December 2011, 21:18:34 UTC
6d3e32e Matt Fleming 08 December 2011, 12:10:50 UTC x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware efi_call_phys_prelog() sets up a 1:1 mapping of the physical address range in swapper_pg_dir. Instead of replacing then restoring entries in swapper_pg_dir we should be using initial_page_table which already contains the 1:1 mapping. It's safe to blindly switch back to swapper_pg_dir in the epilog because the physical EFI routines are only called before efi_enter_virtual_mode(), e.g. before any user processes have been forked. Therefore, we don't need to track which pgd was in %cr3 when we entered the prelog. The previous code actually contained a bug because it assumed that the kernel was loaded at a physical address within the first 8MB of ram, usually at 0x100000. However, this isn't the case with a CONFIG_RELOCATABLE=y kernel which could have been loaded anywhere in the physical address space. Also delete the ancient (and bogus) comments about the page table being restored after the lock is released. There is no locking. Cc: Matthew Garrett <mjg@redhat.com> Cc: Darrent Hart <dvhart@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1323346250.3894.74.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 10 December 2011, 00:39:11 UTC
dc47ce9 Linus Torvalds 09 December 2011, 23:09:32 UTC Linux 3.2-rc5 09 December 2011, 23:09:32 UTC
8def5f5 Linus Torvalds 09 December 2011, 22:45:44 UTC Merge git://git.samba.org/sfrench/cifs-2.6 * git://git.samba.org/sfrench/cifs-2.6: cifs: check for NULL last_entry before calling cifs_save_resume_key cifs: attempt to freeze while looping on a receive attempt cifs: Fix sparse warning when calling cifs_strtoUCS CIFS: Add descriptions to the brlock cache functions 09 December 2011, 22:45:44 UTC
a776878 Linus Torvalds 09 December 2011, 22:45:12 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Calling __pa() with an ioremap()ed address is invalid x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked x86/intel_mid: Kconfig select fix x86/intel_mid: Fix the Kconfig for MID selection 09 December 2011, 22:45:12 UTC
e2f4e0b Linus Torvalds 09 December 2011, 22:41:50 UTC Merge branch 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6 * 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6: spi/gpio: fix section mismatch warning spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build spi/nuc900: Include linux/module.h spi/ath79: fix compile error due to missing include 09 December 2011, 22:41:50 UTC
af209e0 Linus Torvalds 09 December 2011, 16:18:08 UTC Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: raid5 crash during degradation md/raid5: never wait for bad-block acks on failed device. md: ensure new badblocks are handled promptly. md: bad blocks shouldn't cause a Blocked status on a Faulty device. md: take a reference to mddev during sysfs access. md: refine interpretation of "hold_active == UNTIL_IOCTL". md/lock: ensure updates to page_attrs are properly locked. 09 December 2011, 16:18:08 UTC
53523d5 Linus Torvalds 09 December 2011, 16:08:57 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: use new generic {enable,disable}_percpu_irq() routines drivers/net/ethernet/tile: use skb_frag_page() API asm-generic/unistd.h: support new process_vm_{readv,write} syscalls arch/tile: fix double-free bug in homecache_free_pages() arch/tile: add a few #includes and an EXPORT to catch up with kernel changes. 09 December 2011, 16:08:57 UTC
592d44a Linus Torvalds 09 December 2011, 16:08:14 UTC Merge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: MAINTAINERS: Update amd-iommu F: patterns iommu/amd: Fix typo in kernel-parameters.txt iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix comparison using wrong pointer variable in dma debug code 09 December 2011, 16:08:14 UTC
3ab345f Linus Torvalds 09 December 2011, 16:07:42 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix lost speaker volume controls ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins ALSA: hda/realtek - Don't create extra controls with channel suffix ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs ASoC: Provide a more complete DMA driver stub ASoC: Remove references to corgi and spitz from machine driver document ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 ASoC: uda1380: Return proper error in uda1380_modinit failure path ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C ASoC: Mark WM8994 ADC muxes as virtual ALSA: hda/realtek - Fix Oops in alc_mux_select() ALSA: sis7019 - give slow codecs more time to reset 09 December 2011, 16:07:42 UTC
975e32c Linus Torvalds 09 December 2011, 16:07:24 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Do no try to schedule task events if there are none lockdep, kmemcheck: Annotate ->lock in lockdep_init_map() perf header: Use event_name() to get an event name perf stat: Failure with "Operation not supported" 09 December 2011, 16:07:24 UTC
031af16 Mandeep Singh Baines 08 December 2011, 22:34:44 UTC sys_getppid: add missing rcu_dereference In order to safely dereference current->real_parent inside an rcu_read_lock, we need an rcu_dereference. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:29 UTC
1cee22b Alexandre Bounine 08 December 2011, 22:34:42 UTC rapidio/tsi721: modify PCIe capability settings Modify initialization of PCIe capability registers in Tsi721 mport driver: - change Completion Timeout value to avoid unexpected data transfer aborts during intensive traffic. - replace hardcoded offset of PCIe capability block by making it use the common function. This patch is applicable to kernel versions starting from 3.2-rc1. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:29 UTC
b439e66 Alexandre Bounine 08 December 2011, 22:34:36 UTC rapidio/tsi721: fix mailbox resource reporting Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification. Mailbox resources has to be properly reported to allow use of all available mailboxes (initial version reports only MBOX0). This patch is applicable to kernel versions staring from 3.2-rc1. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:29 UTC
ceb9639 Alexandre Bounine 08 December 2011, 22:34:35 UTC rapidio/tsi721: switch to dma_zalloc_coherent Replace the pair dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2 Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:29 UTC
2a95ea6 Michal Hocko 08 December 2011, 22:34:32 UTC procfs: do not overflow get_{idle,iowait}_time for nohz Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and iowait times") we are reporting idle/io_wait time also while a CPU is tickless. We rely on get_{idle,iowait}_time functions to retrieve proper data. These functions, however, use usecs_to_cputime to translate micro seconds time to cputime64_t. This is just an alias to usecs_to_jiffies which reduces the data type from u64 to unsigned int and also checks whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET) and returns MAX_JIFFY_OFFSET in that case. When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300 it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for >3000s! until we overflow unsigned int. Just for reference CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and CONFIG_HZ_1000 ~2s. This results in a bug when people saw [h]top going mad reporting 100% CPU usage even though there was basically no CPU load. The reason was simply that /proc/stat stopped reporting idle/io_wait changes (and reported MAX_JIFFY_OFFSET) and so the only change happening was for user system time. Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision to 32b type and it is much more appropriate for cumulative time values (unlike usecs_to_jiffies which intended for timeout calculations). Signed-off-by: Michal Hocko <mhocko@suse.cz> Tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dave Jones <davej@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:29 UTC
1368edf Mel Gorman 08 December 2011, 22:34:30 UTC mm: vmalloc: check for page allocation failure before vmlist insertion Commit f5252e00 ("mm: avoid null pointer access in vm_struct via /proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after it is fully initialised. Unfortunately, it did not check that __vmalloc_area_node() successfully populated the area. In the event of allocation failure, the vmalloc area is freed but the pointer to freed memory is inserted into the vmlist leading to a a crash later in get_vmalloc_info(). This patch adds a check for ____vmalloc_area_node() failure within __vmalloc_node_range. It does not use "goto fail" as in the previous error path as a warning was already displayed by __vmalloc_area_node() before it called vfree in its failure path. Credit goes to Luciano Chavez for doing all the real work of identifying exactly where the problem was. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com> Tested-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.1.x+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:29 UTC
d021563 Michal Hocko 08 December 2011, 22:34:27 UTC mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks setup_zone_migrate_reserve() expects that zone->start_pfn starts at pageblock_nr_pages aligned pfn otherwise we could access beyond an existing memblock resulting in the following panic if CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid: IP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[<c02d331d>] EFLAGS: 00010006 CPU: 0 EIP is at setup_zone_migrate_reserve+0xcd/0x180 EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000 ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000) Call Trace: [<c02d389c>] __setup_per_zone_wmarks+0xec/0x160 [<c02d3a1f>] setup_per_zone_wmarks+0xf/0x20 [<c08a771c>] init_per_zone_wmark_min+0x27/0x86 [<c020111b>] do_one_initcall+0x2b/0x160 [<c086639d>] kernel_init+0xbe/0x157 [<c05cae26>] kernel_thread_helper+0x6/0xd Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f EIP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58 CR2: 00000000000012b4 We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because highstart_pfn = 0x36ffe. The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE"). Make sure that start_pfn is always aligned to pageblock_nr_pages to ensure that pfn_valid s always called at the start of each pageblock. Architectures with holes in pageblocks will be correctly handled by pfn_valid_within in pageblock_is_reserved. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Dang Bo <bdang@vmware.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Arve Hjnnevg <arve@android.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [3.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
0976133 Hillf Danton 08 December 2011, 22:34:20 UTC mm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages Avoid unlocking and unlocked page if we failed to lock it. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
58a84aa Youquan Song 08 December 2011, 22:34:18 UTC thp: set compound tail page _count to zero Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all page_tail->_count zero at all times. But the current kernel does not set page_tail->_count to zero if a 1GB page is utilized. So when an IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a tail page's _count does not equal zero. kernel BUG at include/linux/mm.h:386! invalid opcode: 0000 [#1] SMP Call Trace: gup_pud_range+0xb8/0x19d get_user_pages_fast+0xcb/0x192 ? trace_hardirqs_off+0xd/0xf hva_to_pfn+0x119/0x2f2 gfn_to_pfn_memslot+0x2c/0x2e kvm_iommu_map_pages+0xfd/0x1c1 kvm_iommu_map_memslots+0x7c/0xbd kvm_iommu_map_guest+0xaa/0xbf kvm_vm_ioctl_assigned_device+0x2ef/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP gup_huge_pud+0xf2/0x159 Signed-off-by: Youquan Song <youquan.song@intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
b6999b1 Youquan Song 08 December 2011, 22:34:16 UTC thp: add compound tail page _mapcount when mapped With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song <youquan.song@intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
09dc3cf Peter Zijlstra 08 December 2011, 22:34:13 UTC printk: avoid double lock acquire Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race") introduced another silly bug where we would want to acquire an already held lock. Avoid this. Reported-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
c193c82 KAMEZAWA Hiroyuki 08 December 2011, 22:34:10 UTC memcg: update maintainers More players joined to memory cgroup developments and Johannes' great work changed internal design of memory cgroup dramatically. And he will do more works. Michal Hokko did many bug fixes and know memory cgroup very well. Daisuke Nishimura helped us very much but he seems busy now. Thanks to his works. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
2dbcd05 Jonghwan Choi 08 December 2011, 22:34:02 UTC drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues If an error occurs after the clock is enabled, the enable/disable state can become unbalanced. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
1de8ad4 Kees Cook 08 December 2011, 22:34:00 UTC CREDITS: update Kees's expired fingerprint and fix details Small clean-up for my CREDITS entry; the GPG fingerprint was not up to date, so I fixed other details at the same time too. Signed-off-by: Kees Cook <kees@outflux.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
1dfb059 Andrea Arcangeli 08 December 2011, 22:33:57 UTC thp: reduce khugepaged freezing latency khugepaged can sometimes cause suspend to fail, requiring that the user retry the suspend operation. Use wait_event_freezable_timeout() instead of schedule_timeout_interruptible() to avoid missing freezer wakeups. A try_to_freeze() would have been needed in the khugepaged_alloc_hugepage tight loop too in case of the allocation failing repeatedly, and wait_event_freezable_timeout will provide it too. khugepaged would still freeze just fine by trying again the next minute but it's better if it freezes immediately. Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: Jiri Slaby <jslaby@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rjw@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
b53fc7c Claudio Scordino 08 December 2011, 22:33:56 UTC fs/proc/meminfo.c: fix compilation error Fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:28 UTC
83aeead Konstantin Khlebnikov 08 December 2011, 22:33:54 UTC vmscan: use atomic-long for shrinker batching Use atomic-long operations instead of looping around cmpxchg(). [akpm@linux-foundation.org: massage atomic.h inclusions] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:27 UTC
635697c Konstantin Khlebnikov 08 December 2011, 22:33:51 UTC vmscan: fix initial shrinker size handling A shrinker function can return -1, means that it cannot do anything without a risk of deadlock. For example prune_super() does this if it cannot grab a superblock refrence, even if nr_to_scan=0. Currently we interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan' according to this. So the next time around this shrinker can cause really big pressure. Let's skip such shrinkers instead. Also make total_scan signed, otherwise the check (total_scan < 0) below never works. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 December 2011, 15:50:27 UTC
b2c1639 Joe Perches 09 December 2011, 04:21:40 UTC MAINTAINERS: Update amd-iommu F: patterns Commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/") moved the files, update the patterns. CC: Ohad Ben-Cohen <ohad@wizery.com> CC: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 09 December 2011, 14:20:23 UTC
e8c7106 Matt Fleming 18 November 2011, 13:09:11 UTC x86, efi: Calling __pa() with an ioremap()ed address is invalid If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [<c104f8ca>] ? page_is_ram+0x1a/0x40 [<c1025aff>] reserve_memtype+0xdf/0x2f0 [<c1024dc9>] set_memory_uc+0x49/0xa0 [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa [<c19216d4>] start_kernel+0x291/0x2f2 [<c19211c7>] ? loglevel+0x1b/0x1b [<c19210bf>] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar <mingo@elte.hu> 09 December 2011, 07:32:26 UTC
6f68657 Al Viro 09 December 2011, 05:38:50 UTC ... and the same kind of leak for mqueue Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 09 December 2011, 05:40:21 UTC
905ad26 Al Viro 09 December 2011, 04:20:45 UTC procfs: fix a vfsmount longterm reference leak kern_mount() doesn't pair with plain mntput()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 09 December 2011, 05:40:19 UTC
7023676 Jeff Layton 02 December 2011, 01:23:34 UTC cifs: check for NULL last_entry before calling cifs_save_resume_key Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer checks at the top. It turns out that at least one of those NULL pointer checks is needed after all. When the LastNameOffset in a FIND reply appears to be beyond the end of the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry to NULL. Since eaf35b1, the code will now oops in this situation. Fix this by having the callers check for a NULL last entry pointer before calling cifs_save_resume_key. No change is needed for the call site in cifs_readdir as it's not reachable with a NULL current_entry pointer. This should fix: https://bugzilla.redhat.com/show_bug.cgi?id=750247 Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Reported-by: Adam G. Metzler <adamgmetzler@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> 09 December 2011, 04:04:47 UTC
95edcff Jeff Layton 02 December 2011, 01:22:41 UTC cifs: attempt to freeze while looping on a receive attempt In the recent overhaul of the demultiplex thread receive path, I neglected to ensure that we attempt to freeze on each pass through the receive loop. Reported-and-Tested-by: Woody Suwalski <terraluna977@gmail.com> Reported-and-Tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> 09 December 2011, 04:04:47 UTC
59edb63 Steve French 10 November 2011, 18:48:20 UTC cifs: Fix sparse warning when calling cifs_strtoUCS Fix sparse endian check warning while calling cifs_strtoUCS CHECK fs/cifs/smbencrypt.c fs/cifs/smbencrypt.c:216:37: warning: incorrect type in argument 1 (different base types) fs/cifs/smbencrypt.c:216:37: expected restricted __le16 [usertype] *<noident> fs/cifs/smbencrypt.c:216:37: got unsigned short *<noident> Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com 09 December 2011, 04:04:47 UTC
9a5101c Pavel Shilovsky 07 November 2011, 13:11:24 UTC CIFS: Add descriptions to the brlock cache functions Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com> 09 December 2011, 04:04:47 UTC
back to top