Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 09:02:56 UTC
sort by:
Revision Author Date Message Commit Date
bb014db Linus Torvalds 08 August 2013, 16:32:20 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio fixes from Rusty Russell: "More virtio console fixes than I'm happy with, but all real issues, and all CC:stable.." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio-scsi: Fix virtqueue affinity setup virtio: console: return -ENODEV on all read operations after unplug virtio: console: fix raising SIGIO after port unplug virtio: console: clean up port data immediately at time of unplug virtio: console: fix race in port_fops_open() and port unplug virtio: console: fix race with port unplug and open/close virtio/console: Add pipe_lock/unlock for splice_write virtio/console: Quit from splice_write if pipe->nrbufs is 0 08 August 2013, 16:32:20 UTC
67ef626 Linus Torvalds 08 August 2013, 16:28:08 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: - MSM: GPIO fixes (includes old code removal) - OMAP: earlyprintk regression, AM33xx cpgmac PM regression - OMAP5: urgent fix for potentially harmful voltage regulator values - Renesas: gpio-keys fix, fix SD card detection, fix shdma calculation error - STi: critical SMP boot fix - tegra: DTS fix for usb-phy - a couple MAINTAINERS updates (Arnd is on paternity leave, Kevin is stepping up to help arm-soc maintenance) * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: add TI Keystone ARM platform MAINTAINERS: delete Srinidhi from ux500 ARM: tegra: enable ULPI phy on Colibri T20 ARM: STi: remove sti_secondary_start from INIT section. ARM: STi: Fix cpu nodes with correct device_type. ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL ARM: dts: omap5-uevm: update optional/unused regulator configurations ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC ARM: dts: omap5-uevm: document regulator signals used on the actual board ARM: msm: Consolidate gpiomux for older architectures ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code ARM: msm: dts: Fix the gpio register address for msm8960 08 August 2013, 16:28:08 UTC
3709050 Linus Torvalds 08 August 2013, 16:06:37 UTC Revert "slub: do not put a slab to cpu partial list when cpu_partial is 0" This reverts commit 318df36e57c0ca9f2146660d41ff28e8650af423. This commit caused Steven Rostedt's hackbench runs to run out of memory due to a leak. As noted by Joonsoo Kim, it is buggy in the following scenario: "I guess, you may set 0 to all kmem caches's cpu_partial via sysfs, doesn't it? In this case, memory leak is possible in following case. Code flow of possible leak is follwing case. * in __slab_free() 1. (!new.inuse || !prior) && !was_frozen 2. !kmem_cache_debug && !prior 3. new.frozen = 1 4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1 5. with this patch, put_cpu_partial() doesn't do anything, because this cache's cpu_partial is 0 6. return In step 5, leak occur" And Steven does indeed have cpu_partial set to 0 due to RT testing. Joonsoo is cooking up a patch, but everybody agrees that reverting this for now is the right thing to do. Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 August 2013, 16:06:37 UTC
b7bc9e7 Linus Torvalds 07 August 2013, 20:01:30 UTC Merge tag 'trace-fixes-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Oleg Nesterov has been working hard in closing all the holes that can lead to race conditions between deleting an event and accessing an event debugfs file. This included a fix to the debugfs system (acked by Greg Kroah-Hartman). We think that all the holes have been patched and hopefully we don't find more. I haven't marked all of them for stable because I need to examine them more to figure out how far back some of the changes need to go. Along the way, some other fixes have been made. Alexander Z Lam fixed some logic where the wrong buffer was being modifed. Andrew Vagin found a possible corruption for machines that actually allocate cpumask, as a reference to one was being zeroed out by mistake. Dhaval Giani found a bad prototype when tracing is not configured. And I not only had some changes to help Oleg, but also finally fixed a long standing bug that Dave Jones and others have been hitting, where a module unload and reload can cause the function tracing accounting to get screwed up" * tag 'trace-fixes-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix reset of time stamps during trace_clock changes tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer tracing: Fix trace_dump_stack() proto when CONFIG_TRACING is not set tracing: Fix fields of struct trace_iterator that are zeroed by mistake tracing/uprobes: Fail to unregister if probe event files are in use tracing/kprobes: Fail to unregister if probe event files are in use tracing: Add comment to describe special break case in probe_remove_event_call() tracing: trace_remove_event_call() should fail if call/file is in use debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs) ftrace: Check module functions being traced on reload ftrace: Consolidate some duplicate code for updating ftrace ops tracing: Change remove_event_file_dir() to clear "d_subdirs"->i_private tracing: Introduce remove_event_file_dir() tracing: Change f_start() to take event_mutex and verify i_private != NULL tracing: Change event_filter_read/write to verify i_private != NULL tracing: Change event_enable/disable_read() to verify i_private != NULL tracing: Turn event/id->i_private into call->event.type 07 August 2013, 20:01:30 UTC
8ef9c29 Linus Torvalds 07 August 2013, 20:00:23 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: add missing check for __O_TMPFILE in fcntl_init() fs: Allow unprivileged linkat(..., AT_EMPTY_PATH) aka flink fs: Fix file mode for O_TMPFILE reiserfs: fix deadlock in umount 07 August 2013, 20:00:23 UTC
1154f85 Santosh Shilimkar 05 August 2013, 18:11:14 UTC MAINTAINERS: add TI Keystone ARM platform Adding maintainer for arch/arm/mach-keystone/ Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> 07 August 2013, 17:30:29 UTC
60ba4f4 Linus Walleij 31 July 2013, 14:36:38 UTC MAINTAINERS: delete Srinidhi from ux500 Srinidhi's mail address is now bouncing and he has requested me to delete this entry. Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> 07 August 2013, 17:23:49 UTC
e4ef108 Linus Torvalds 06 August 2013, 21:00:28 UTC Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fix from Tejun Heo: "Just the addition of MODULE_DEVICE_TABLE() for a platform driver" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: pata_imx: expose module alias for loading from device-tree 06 August 2013, 21:00:28 UTC
8e28921 Linus Torvalds 06 August 2013, 20:59:28 UTC Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "Fix for a minor memory leak bug in the cgroup init failure path" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix a leak when percpu_ref_init() fails 06 August 2013, 20:59:28 UTC
4264bc1 Linus Torvalds 06 August 2013, 20:58:34 UTC Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull two workqueue fixes from Tejun Heo: "A lockdep notation update so that nested work_on_cpu() invocations don't lead to spurious lockdep warnings and fix for an unbound attr bug which made what's shown in sysfs deviate from the actual ones. Both patches have pretty limited scope" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: copy workqueue_attrs with all fields workqueue: allow work_on_cpu() to be called recursively 06 August 2013, 20:58:34 UTC
0fff106 Linus Torvalds 06 August 2013, 20:18:52 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Peter Anvin. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, amd, microcode: Fix error path in apply_microcode_amd() x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz x86, efi: correct call to free_pages x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset 06 August 2013, 20:18:52 UTC
2cfe6c4 Steven Rostedt 06 August 2013, 02:55:28 UTC printk: Fix return of braille_register_console() Some of my configs I test with have CONFIG_A11Y_BRAILLE_CONSOLE set. When I started testing against v3.11-rc4 my console went bonkers. Using ktest to bisect the issue, it came down to: commit bbeddf52a "printk: move braille console support into separate braille.[ch] files" Looking into the patch I found the problem. It's with the return of braille_register_console(). As anything other than NULL is considered a failure. But for those of us that have CONFIG_A11Y_BRAILLE_CONSOLE set but do not define a "brl" or "brl=" on the command line, we still may want a console that those with sight can still use. Return NULL (success) if "brl" or "brl=" is not on the console line. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 August 2013, 20:18:12 UTC
35114fc Oleg Nesterov 06 August 2013, 15:43:37 UTC Revert "ptrace: PTRACE_DETACH should do flush_ptrace_hw_breakpoint(child)" This reverts commit fab840fc2d542fabcab903db8e03589a6702ba5f. This commit even has the test-case to prove that the tracee can be killed by SIGTRAP if the debugger does not remove the breakpoints before PTRACE_DETACH. However, this is exactly what wineserver deliberately does, set_thread_context() calls PTRACE_ATTACH + PTRACE_DETACH just for PTRACE_POKEUSER(DR*) in between. So we should revert this fix and document that PTRACE_DETACH should keep the breakpoints. Reported-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 August 2013, 20:16:32 UTC
1853a65 Linus Torvalds 06 August 2013, 20:14:43 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Two platform-specific fixes plus a fix for oprofile which was calling smp_processor_id() in preemptible code" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0 MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code. MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335 06 August 2013, 20:14:43 UTC
69b4a3a Linus Torvalds 06 August 2013, 20:13:58 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Enable LZ4 compression for the kernel image, add the machine id for the new zBC12 model, fix an issue with hanging dasd devices, correct a Kconfig dependency, fix a compile error in the perf module with CONFIG_KVM=n and fix the find_next_bit_left primitive for the PCI base layer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix hanging devices after path events s390/perf: fix compile error (undefined reference sie_exit) s390/bitops: fix find_next_bit_left s390: add support for IBM zBC12 machine s390/Kconfig: select 'TTY' when 'S390_GUEST' is enabled s390: add support for LZ4-compressed kernel 06 August 2013, 20:13:58 UTC
6160968 Oleg Nesterov 06 August 2013, 17:38:55 UTC userns: unshare_userns(&cred) should not populate cred on failure unshare_userns(new_cred) does *new_cred = prepare_creds() before create_user_ns() which can fail. However, the caller expects that it doesn't need to take care of new_cred if unshare_userns() fails. We could change the single caller, sys_unshare(), but I think it would be more clean to avoid the side effects on failure, so with this patch unshare_userns() does put_cred() itself and initializes *new_cred only if create_user_ns() succeeeds. Cc: stable@vger.kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 August 2013, 20:13:24 UTC
3d62c45 Zheng Liu 25 July 2013, 00:13:19 UTC vfs: add missing check for __O_TMPFILE in fcntl_init() As comment in include/uapi/asm-generic/fcntl.h described, when introducing new O_* bits, we need to check its uniqueness in fcntl_init(). But __O_TMPFILE bit is missing. So fix it. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 05 August 2013, 14:25:32 UTC
bb2314b Andy Lutomirski 02 August 2013, 04:44:31 UTC fs: Allow unprivileged linkat(..., AT_EMPTY_PATH) aka flink Every now and then someone proposes a new flink syscall, and this spawns a long discussion of whether it would be a security problem. I think that this is missing the point: flink is *already* allowed without privilege as long as /proc is mounted -- it's called AT_SYMLINK_FOLLOW. Now that O_TMPFILE is here, the ability to create a file with O_TMPFILE, write it, and link it in is very convenient. The only problem is that it requires that /proc be mounted so that you can do: linkat(AT_FDCWD, "/proc/self/fd/<tmpfd>", dfd, path, AT_SYMLINK_NOFOLLOW) This sucks -- it's much nicer to do: linkat(tmpfd, "", dfd, path, AT_EMPTY_PATH) Let's allow it. If this turns out to be excessively scary, it we could instead require that the inode in question be I_LINKABLE, but this seems pointless given the /proc situation Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 05 August 2013, 14:24:11 UTC
e305f48 Andy Lutomirski 02 August 2013, 04:07:52 UTC fs: Fix file mode for O_TMPFILE O_TMPFILE, like O_CREAT, should respect the requested mode and should create regular files. This fixes two bugs: O_TMPFILE required privilege (because the mode ended up as 000) and it produced bogus inodes with no type. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 05 August 2013, 14:24:10 UTC
672fe15 Al Viro 05 August 2013, 13:37:37 UTC reiserfs: fix deadlock in umount Since remove_proc_entry() started to wait for IO in progress (i.e. since 2007 or so), the locking in fs/reiserfs/proc.c became wrong; if procfs read happens between the moment when umount() locks the victim superblock and removal of /proc/fs/reiserfs/<device>/*, we'll get a deadlock - read will wait for s_umount (in sget(), called by r_start()), while umount will wait in remove_proc_entry() for that read to finish, holding s_umount all along. Fortunately, the same change allows a much simpler race avoidance - all we need to do is remove the procfs entries in the very beginning of reiserfs ->kill_sb(); that'll guarantee that pointer to superblock will remain valid for the duration for procfs IO, so we don't need sget() to keep the sucker alive. As the matter of fact, we can get rid of the home-grown iterator completely, and use single_open() instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 05 August 2013, 13:37:37 UTC
fcfa66d Florian Fainelli 05 August 2013, 10:50:25 UTC MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0 The hardware interrupt routing for boot CPU != 0 is wrong because it will route all the hardware interrupts to TP0 which is not the one we booted from. Fix this by properly checking which boot CPU we are booting from and updating the right interrupt mask for the boot CPU. This fixes booting on BCM3368 with bmips_smp_emabled = 0. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5650/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 August 2013, 11:35:18 UTC
cf5b2d2 Ralf Baechle 01 August 2013, 16:31:05 UTC MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code. current_cpu_type() is not preemption-safe. If CONFIG_PREEMPT is enabled then mipsxx_reg_setup() can be called from preemptible state. Added get_cpu()/put_cpu() pair to make it preemption-safe. This was found while testing oprofile with CONFIG_DEBUG_PREEMPT enable. /usr/zntestsuite # opcontrol --init /usr/zntestsuite # opcontrol --setup --event=L2_CACHE_ACCESSES:500 --event=L2_CACHE_MISSES:500 --no-vmlinux /usr/zntestsuite # opcontrol --start Using 2.6+ OProfile kernel interface. BUG: using smp_processor_id() in preemptible [00000000] code: oprofiled/1362 caller is mipsxx_reg_setup+0x11c/0x164 CPU: 0 PID: 1362 Comm: oprofiled Not tainted 3.10.4 #18 Stack : 00000006 70757465 00000000 00000000 00000000 00000000 80b173f6 00000037 80b10000 00000000 80b21614 88f5a220 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 89c49c00 89c49c2c 80721254 807b7927 8012c1d0 80b10000 80721254 00000000 00000552 88f5a220 80b1335c 807b78e6 89c49ba8 ... Call Trace: [<801099a4>] show_stack+0x64/0x7c [<80665520>] dump_stack+0x20/0x2c [<803a2250>] debug_smp_processor_id+0xe0/0xf0 [<8052df24>] mipsxx_reg_setup+0x11c/0x164 [<8052cd70>] op_mips_setup+0x24/0x4c [<80529cfc>] oprofile_setup+0x5c/0x12c [<8052b9f8>] event_buffer_open+0x78/0xf8 [<801c3150>] do_dentry_open.isra.15+0x2b8/0x3b0 [<801c3270>] finish_open+0x28/0x4c [<801d49b8>] do_last.isra.41+0x2cc/0xd00 [<801d54a0>] path_openat+0xb4/0x4c4 [<801d5c44>] do_filp_open+0x3c/0xac [<801c4744>] do_sys_open+0x110/0x1f4 [<8010f47c>] stack_done+0x20/0x44 Bug reported and original patch by Jerin Jacob <jerinjacobk@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jerin Jacob <jerinjacobk@gmail.com> 05 August 2013, 11:34:22 UTC
3ac3bcb Markos Chandras 09 July 2013, 08:21:35 UTC MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335 The PNX8335_PCI_ETHERNET_INT macro is defined in arch/mips/include/asm/mach-pnx833x/irq-mapping.h only if CONFIG_SOC_PNX8335 is selected. Fixes the following randconfig problem: arch/mips/pnx833x/common/platform.c:210:12: error: 'PNX8335_PIC_ETHERNET_INT' undeclared here (not in a function) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5585/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 August 2013, 11:34:22 UTC
a1632ad Lucas Stach 23 July 2013, 18:11:45 UTC ARM: tegra: enable ULPI phy on Colibri T20 This was missed when splitting out the phy from the controller node in commit 9dffe3be3f32 (ARM: tegra: modify ULPI reset GPIO properties). Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:52:10 UTC
c095ba7 Linus Torvalds 04 August 2013, 20:46:46 UTC Linux 3.11-rc4 04 August 2013, 20:46:46 UTC
d6f67eb Srinivas Kandagatla 01 August 2013, 12:13:41 UTC ARM: STi: remove sti_secondary_start from INIT section. This patch removes sti_secondary_start from _INIT section, there are 2 reason for this removal. 1. discarding such a small code does not save much, given the RAM sizes. 2. Having this code discarded, creates corruption issue when we boot smp-kernel with nrcpus=1 or with single cpu node in DT. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:40:55 UTC
95e8ce6 Srinivas Kandagatla 01 August 2013, 12:13:31 UTC ARM: STi: Fix cpu nodes with correct device_type. This patch fixes cpu nodes with device_type = "cpu". This change was not necessary before 3.10-rc7. Without this patch STi SOCs does not boot as SMP. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:40:48 UTC
ca2480a Olof Johansson 04 August 2013, 20:37:49 UTC Merge tag 'renesas-fixes2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Second round of Renesas ARM based SoC fixes for v3.11 * Lager board: do not annotate gpio_buttons as __initdata - This avoids accessing uninitialised memory if keys are pressed after kernel initialisation completes. - Bug introduced in gpio-keys were enabled in v3.11-rc1 * Bock-W board: fix SDHI0 PFC settings - Allow detection of SD card - Bug introduced in SDHI support was added in v3.11-rc1 * shdma: fixup sh_dmae_get_partial() calculation error - Bug introduced in 2.6.34-rc1. * armadillo800eva board: Don't request GPIO 166 in board code - Allow use of touchscreen - Bug introduced in v3.11-rc1 * tag 'renesas-fixes2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:37:49 UTC
08d047a Olof Johansson 04 August 2013, 20:35:36 UTC Merge tag 'for-v3.11-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley via Tony Lindgren: Some OMAP hwmod fixes for v3.11-rc. Mostly intended to fix an earlyprintk regression and an AM33xx cpgmac power management regression. Basic build, boot, and PM tests are available here: http://www.pwsan.com/omap/testlogs/hwmod_fixes_a_v3.11-rc/20130730042132/ The tests include temporary fixes for the unrelated 2430SDP and OMAP3 boot regressions, which are not part of this signed tag. * tag 'for-v3.11-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:35:36 UTC
bbbeaef Olof Johansson 04 August 2013, 20:35:21 UTC Merge tag 'omap-for-v3.11/fixes-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Fixes for omap5-uevm regulators from Nishanth Menon <nm@ti.com>: Due to wrong older revision of documentation used as reference, we seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This series is based power tree on production board 750-2628-XXX platform. Unfortunately, the wrong voltages may be detrimental to OMAP5 as they supply hardware blocks at voltages that are out of specification. There is a chance that without these fixes there can be hardware damage to omap5-uevm boards with the v3.11-rc series. * tag 'omap-for-v3.11/fixes-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5-uevm: update optional/unused regulator configurations ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC ARM: dts: omap5-uevm: document regulator signals used on the actual board Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:35:21 UTC
a621cd5 Olof Johansson 04 August 2013, 20:34:57 UTC Merge tag 'msm-3.11-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into fixes From David Brown, fixes for MSM for 3.11: Two small fixes for MSM. The first fixes the a gpio controller register address. I didn't see any acks from the devicetree maintainers, so I've copied them on this pull request. The change itself is minor, and just to the register address. The second change removes the gpiomux V1 code from MSM. This was breaking compilation for some of the targets. * tag 'msm-3.11-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Consolidate gpiomux for older architectures ARM: msm: dts: Fix the gpio register address for msm8960 Signed-off-by: Olof Johansson <olof@lixom.net> 04 August 2013, 20:34:57 UTC
e56c756 Linus Torvalds 04 August 2013, 18:46:07 UTC Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Two fixes for slave dmaengine. The first fixes cyclic dma transfers for pl330 and the second one makes us return the correct error code on probe" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: pl330: Fix cyclic transfers pch_dma: fix error return code in pch_dma_probe() 04 August 2013, 18:46:07 UTC
3d90268 Linus Torvalds 04 August 2013, 18:44:18 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fix from Dave Airlie: "Just a quick fix that a few people have reported, be nice to have in asap" The drm tree seems to be very confused about 64-bit divides. Here it uses a slow 64-by-64 bit divide to divide by a small constant. Oh well. Doesn't look performance-critical, just stupid. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix 64 bit divide in SI spm code 04 August 2013, 18:44:18 UTC
387aae6 Hugh Dickins 04 August 2013, 18:30:25 UTC tmpfs: fix SEEK_DATA/SEEK_HOLE regression Commit 46a1c2c7ae53 ("vfs: export lseek_execute() to modules") broke the tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts the carefully prepared -ENXIO to -EINVAL. Other filesystems avoid it in error cases: do the same in tmpfs. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 August 2013, 18:40:17 UTC
2f85399 Linus Torvalds 04 August 2013, 18:00:43 UTC Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All small regression or small fixes, nothing surprising at this stage. - regression fix for intel Mac Mini quirk - compress ioctl error fix - ASoC fixes for control change notifications, some UI fixes, driver-specific fixes (resource leak, build errors, etc)" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing fixup for Mac Mini with STAC9221 ASoC: wm0010: Fix resource leak ASoC: au1x: Fix build ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESET ASoC: bfin-ac97: Fix prototype error following AC'97 refactoring ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION ASoC: dapm: Fix return value of snd_soc_dapm_put_{volsw,enum_virt}() 04 August 2013, 18:00:43 UTC
adfb8e5 Alex Deucher 01 August 2013, 13:03:29 UTC drm/radeon: fix 64 bit divide in SI spm code Forgot to use the appropriate math64 function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com> 04 August 2013, 01:03:14 UTC
72a67a9 Linus Torvalds 03 August 2013, 22:00:23 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ... 03 August 2013, 22:00:23 UTC
4bd8e73 Himanshu Madhani 03 August 2013, 03:16:01 UTC qlcnic: Fix for flash update failure on 83xx adapter Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:04 UTC
b1f5037 Rajesh Borundia 03 August 2013, 03:16:00 UTC qlcnic: Fix link speed and duplex display for 83xx adapter o Set link speed and duplex to unknown when link is not up. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:04 UTC
beb3d3a Rajesh Borundia 03 August 2013, 03:15:59 UTC qlcnic: Fix link speed display for 82xx adapter o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:03 UTC
2e3ea7e Shahed Shaikh 03 August 2013, 03:15:58 UTC qlcnic: Fix external loopback test. Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:03 UTC
01b91f4 Pratik Pujar 03 August 2013, 03:15:57 UTC qlcnic: Removed adapter series name from warning messages. Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:03 UTC
f91bbcb Himanshu Madhani 03 August 2013, 03:15:56 UTC qlcnic: Free up memory in error path. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:03 UTC
e0d138d Shahed Shaikh 03 August 2013, 03:15:55 UTC qlcnic: Fix ingress MAC learning o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:03 UTC
4a99ab5 Shahed Shaikh 03 August 2013, 03:15:54 UTC qlcnic: Fix MAC address filter issue on 82xx adapter Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 19:03:03 UTC
b6bb1c6 Mugunthan V N 03 August 2013, 11:09:45 UTC net: ethernet: davinci_emac: drop IRQF_DISABLED IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 August 2013, 18:53:04 UTC
83aaf3b Linus Torvalds 03 August 2013, 18:15:03 UTC Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linux Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure. 03 August 2013, 18:15:03 UTC
32c6e25 Linus Torvalds 03 August 2013, 18:14:25 UTC Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix chip initialization/configuration in MAX6697 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max6697) fix MAX6581 ideality 03 August 2013, 18:14:25 UTC
9250d90 Linus Torvalds 03 August 2013, 18:12:09 UTC Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull arm fixes fixes from Russell King: "This fixes a couple of problems with commit 48be69a026b2 ("ARM: move signal handlers into a vdso-like page"), one of which was originally discovered via my testing originally, but the fix for it was never actually committed. The other shows up on noMMU builds, and such platforms are extremely rare and as such are not part of my nightly testing" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page) ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page) 03 August 2013, 18:12:09 UTC
5c52add Vivien Didelot 30 July 2013, 21:14:34 UTC hwmon: (max6697) fix MAX6581 ideality Without this patch, the values for ideality (register 0x4b) and ideality selection mask (register 0x4c) are inverted. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: Guenter Roeck <linux@roeck-us.net> 03 August 2013, 14:04:50 UTC
e35ac62 Russell King 03 August 2013, 09:49:38 UTC Merge branch 'security-fixes' into fixes 03 August 2013, 09:49:38 UTC
8c0cc8a Russell King 03 August 2013, 09:39:51 UTC ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page) Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 August 2013, 09:49:01 UTC
e0d4075 Russell King 03 August 2013, 09:30:05 UTC ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page) Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 August 2013, 09:30:05 UTC
9457158 Alexander Z Lam 03 August 2013, 01:36:16 UTC tracing: Fix reset of time stamps during trace_clock changes Fixed two issues with changing the timestamp clock with trace_clock: - The global buffer was reset on instance clock changes. Change this to pass the correct per-instance buffer - ftrace_now() is used to set buf->time_start in tracing_reset_online_cpus(). This was incorrect because ftrace_now() used the global buffer's clock to return the current time. Change this to use buffer_ftrace_now() which returns the current time for the correct per-instance buffer. Also removed tracing_reset_current() because it is not used anywhere Link: http://lkml.kernel.org/r/1375493777-17261-2-git-send-email-azl@google.com Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Alexander Z Lam <lambchop468@gmail.com> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Alexander Z Lam <azl@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 03 August 2013, 02:40:09 UTC
711e124 Alexander Z Lam 03 August 2013, 01:36:15 UTC tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer Releasing the free_buffer file in an instance causes the global buffer to be stopped when TRACE_ITER_STOP_ON_FREE is enabled. Operate on the correct buffer. Link: http://lkml.kernel.org/r/1375493777-17261-1-git-send-email-azl@google.com Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Alexander Z Lam <lambchop468@gmail.com> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Alexander Z Lam <azl@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 03 August 2013, 02:39:29 UTC
e67bc51 Dhaval Giani 02 August 2013, 18:47:29 UTC tracing: Fix trace_dump_stack() proto when CONFIG_TRACING is not set When CONFIG_TRACING is not enabled, the stub prototype for trace_dump_stack() is incorrect. It has (void) when it should be (int). Link: http://lkml.kernel.org/r/CAPhKKr_H=ukFnBL4WgDOVT5ay2xeF-Ho+CA0DWZX0E2JW-=vSQ@mail.gmail.com Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 03 August 2013, 02:38:10 UTC
ed5467d Andrew Vagin 02 August 2013, 17:16:43 UTC tracing: Fix fields of struct trace_iterator that are zeroed by mistake tracing_read_pipe zeros all fields bellow "seq". The declaration contains a comment about that, but it doesn't help. The first field is "snapshot", it's true when current open file is snapshot. Looks obvious, that it should not be zeroed. The second field is "started". It was converted from cpumask_t to cpumask_var_t (v2.6.28-4983-g4462344), in other words it was converted from cpumask to pointer on cpumask. Currently the reference on "started" memory is lost after the first read from tracing_read_pipe and a proper object will never be freed. The "started" is never dereferenced for trace_pipe, because trace_pipe can't have the TRACE_FILE_ANNOTATE options. Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 03 August 2013, 02:28:41 UTC
6a8b7f0 Paul Moore 02 August 2013, 18:45:08 UTC netlabel: use domain based selectors when address based selectors are not available NetLabel has the ability to selectively assign network security labels to outbound traffic based on either the LSM's "domain" (different for each LSM), the network destination, or a combination of both. Depending on the type of traffic, local or forwarded, and the type of traffic selector, domain or address based, different hooks are used to label the traffic; the goal being minimal overhead. Unfortunately, there is a bug such that a system using NetLabel domain based traffic selectors does not correctly label outbound local traffic that is not assigned to a socket. The issue is that in these cases the associated NetLabel hook only looks at the address based selectors and not the domain based selectors. This patch corrects this by checking both the domain and address based selectors so that the correct labeling is applied, regardless of the configuration type. In order to acomplish this fix, this patch also simplifies some of the NetLabel domainhash structures to use a more common outbound traffic mapping type: struct netlbl_dommap_def. This simplifies some of the code in this patch and paves the way for further simplifications in the future. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 23:57:01 UTC
5f671d6 Roman Gushchin 02 August 2013, 14:36:40 UTC net: check net.core.somaxconn sysctl values It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Reported-by: Changli Gao <xiaosuo@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 22:18:53 UTC
3508ea3 Denis Kirjanov 02 August 2013, 09:50:54 UTC sis900: Fix the tx queue timeout issue [ 198.720048] ------------[ cut here ]------------ [ 198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240() [ 198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out [ 198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii [ 198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12 [ 198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS Revision 1013 Beta 001 12/14/2001 [ 198.720175] 000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24 [ 198.720197] 00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10 [ 198.720217] c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea [ 198.720240] Call Trace: [ 198.720257] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720274] [<c12208d6>] dump_stack+0x16/0x20 [ 198.720306] [<c1031e4d>] warn_slowpath_common+0x7d/0xa0 [ 198.720318] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720330] [<c1031f13>] warn_slowpath_fmt+0x33/0x40 [ 198.720342] [<c13fa6b9>] dev_watchdog+0x229/0x240 [ 198.720357] [<c103f158>] call_timer_fn+0x78/0x150 [ 198.720369] [<c103f0e0>] ? internal_add_timer+0x40/0x40 [ 198.720381] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720392] [<c103f33f>] run_timer_softirq+0x10f/0x200 [ 198.720412] [<c103954f>] ? __do_softirq+0x6f/0x210 [ 198.720424] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720435] [<c1039598>] __do_softirq+0xb8/0x210 [ 198.720467] [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30 [ 198.720484] [<c1003245>] ? handle_irq+0x25/0xd0 [ 198.720496] [<c1039c0c>] irq_exit+0x9c/0xb0 [ 198.720508] [<c14bc9d7>] do_IRQ+0x47/0x94 [ 198.720534] [<c1056078>] ? hrtimer_start+0x28/0x30 [ 198.720564] [<c14bc8b1>] common_interrupt+0x31/0x38 [ 198.720589] [<c1008692>] ? default_idle+0x22/0xa0 [ 198.720600] [<c10083c7>] arch_cpu_idle+0x17/0x30 [ 198.720631] [<c106d23d>] cpu_startup_entry+0xcd/0x180 [ 198.720643] [<c14ae30a>] rest_init+0xaa/0xb0 [ 198.720654] [<c14ae260>] ? reciprocal_value+0x50/0x50 [ 198.720668] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720679] [<c1704bda>] start_kernel+0x29a/0x350 [ 198.720690] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720721] [<c1704269>] i386_start_kernel+0x39/0xa0 [ 198.720729] ---[ end trace 81e0a6266f5c73a8 ]--- [ 198.720740] eth0: Transmit timeout, status 00000204 00000000 timer routine checks the link status and if it's up calls netif_carrier_on() allowing upper layer to start the tx queue even if the auto-negotiation process is not finished. Also remove ugly auto-negotiation check from the sis900_start_xmit() CC: Duan Fugang <B38611@freescale.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 22:04:15 UTC
abe0308 Linus Torvalds 02 August 2013, 21:58:30 UTC Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: - Fixes for the newly merged mlx5 hardware driver - Stack info leak fixes from Dan Carpenter - Fixes for pkey table handling with SR-IOV - A few other small things * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix pkey change flow for virtualization environments IPoIB: Make sure child devices use valid/proper pkeys IB/core: Create QP1 using the pkey index which contains the default pkey mlx5_core: Variable may be used uninitialized mlx5_core: Implement new initialization sequence mlx5_core: Fix use after free in mlx5_cmd_comp_handler() IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext() IB/mlx5: Fix error return code in init_one() IB/mlx4: Use default pkey when creating tunnel QPs RDMA/cma: Only call cma_save_ib_info() for CM REQs RDMA/cma: Fix accessing invalid private data for UD RDMA/cma: Fix gcc warning Revert "RDMA/nes: Fix compilation error when nes_debug is enabled" IB/qib: Add err_decode() call for ring dump RDMA/cxgb3: Fix stack info leak in iwch_create_cq() RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq() RDMA/ocrdma: Fix several stack info leaks RDMA/cxgb4: Fix stack info leak in c4iw_create_qp() RDMA/ocrdma: Remove unused include 02 August 2013, 21:58:30 UTC
1cb39a6 Linus Torvalds 02 August 2013, 21:57:24 UTC Merge tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Yet another GPIO pull request, fixing the fix from the last one. It turns out that fixing the boot path for device tree boots on OMAP breaks out antique systems (such as OMAP1) and we need to find a better way. So we're reverting that "fix" for the moment and thinking about something better. Also fixing a build issue on the MSM driver" * tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio_msm: Fix build error due to missing err.h Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT" Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT" Revert "gpio/omap: fix build error when OF_GPIO is not defined." 02 August 2013, 21:57:24 UTC
446266b Daniel Borkmann 02 August 2013, 09:32:43 UTC net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 21:56:06 UTC
9bb8eeb Lekensteyn 02 August 2013, 08:36:55 UTC r8169: remove "PHY reset until link up" log spam This message was added in commit a7154cb8 (June 2004, [PATCH] r8169: link handling and phy reset rework) and is printed every ten seconds when no cable is connected and runtime power management is disabled. (Before that commit, "Reset RTL8169s PHY" would be printed instead.) Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 21:55:09 UTC
7069f98 Felipe Balbi 02 August 2013, 07:44:10 UTC net: ethernet: cpsw: drop IRQF_DISABLED IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 21:53:52 UTC
cbd3755 stephen hemminger 02 August 2013, 05:32:07 UTC htb: fix sign extension bug When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2013, 21:52:20 UTC
e7e2e51 Linus Torvalds 02 August 2013, 21:39:49 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here is not quite a handful of powerpc fixes for rc3. The windfarm fix is a regression fix (though not a new one), the PMU interrupt rename is not a fix per-se but has been submitted a long time ago and I kept forgetting to put it in (it puts us back in sync with x86), the other perf bit is just about putting an API/ABI bit definition in the right place for userspace to consume, and finally, we have a fix for the VPHN (Virtual Partition Home Node) feature (notification that the hypervisor is moving nodes around) which could cause lockups so we may as well fix it now" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/windfarm: Fix noisy slots-fan on Xserve (rm31) powerpc: VPHN topology change updates all siblings powerpc/perf: Export PERF_EVENT_CONFIG_EBB_SHIFT to userspace powerpc: Rename PMU interrupts from CNT to PMI 02 August 2013, 21:39:49 UTC
6d039f8 Linus Torvalds 02 August 2013, 21:37:45 UTC Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM fixes from Russell King: "I've thought long and hard about what to say for this pull request, and I really can't work out anything sane to say to summarise much of these commits. The problem is, for most of these are, yet again, lots of small bits scattered around the place without any real overall theme to them" Most notable is probably the kuser page helper improvements. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (22 commits) ARM: Add .text annotations where required after __CPUINIT removal ARM: 7803/1: Fix deadlock scenario with smp_send_stop() ARM: make vectors page inaccessible from userspace ARM: move signal handlers into a vdso-like page ARM: allow kuser helpers to be removed from the vector page ARM: update FIQ support for relocation of vectors ARM: use linker magic for vectors and vector stubs ARM: move vector stubs ARM: poison memory between kuser helpers ARM: poison the vectors page ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above is_smp() test ARM: 7800/1: ARMv7-M: Fix name of NVIC handler function ARM: Fix sorting of machine- initializers ARM: 7791/1: a.out: remove partial a.out support ARM: 7790/1: Fix deferred mm switch on VIVT processors ARM: 7789/1: Do not run dummy_flush_tlb_a15_erratum() on non-Cortex-A15 ARM: 7787/1: virt: ensure visibility of __boot_cpu_mode ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfo ARM: 7786/1: hyp: fix macro parameterisation ARM: 7785/1: mm: restrict early_alloc to section-aligned memory ... 02 August 2013, 21:37:45 UTC
efc6816 Linus Torvalds 02 August 2013, 21:36:32 UTC Merge branch 'parisc-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The majority of lines changed are due the addition of a defconfig for the C8000 machine. Even the fix in parisc/kernel/cache.c file is actually ony a 10-line fix, but the change became bigger (and much nicer) to avoid errors of the checkpatch script. Here is the short-changelog: This round of parisc updates includes mostly fixes for the C8000 workstation. We have a new defconfig file for this machine, as well as fixes for it's serial port, the AGP driver and the cache routines to cope with the vmas of the FireGL card in a C8000. The sys32.h header file was not used and as such it's now gone" * 'parisc-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix interrupt routing for C8000 serial ports parisc: Remove arch/parisc/kernel/sys32.h header parisc: add defconfig for c8000 machine parisc: agp/parisc-agp: allow binding of user memory to the AGP GART parisc: Fix cache routines to ignore vma's with an invalid pfn 02 August 2013, 21:36:32 UTC
f9ed432 Linus Torvalds 02 August 2013, 21:22:15 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix hid-sony PS3 sixaxxis breakage from Benjamin Tissories - fix hidraw race condition from Yonghua Zheng - fix/bandaid for rare device enumeration problems of Logitech Unifying receivers from Nestor Lopez Casado * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hidraw: fix improper mutex release HID: sony: fix HID mapping for PS3 sixaxis controller HID: hid-logitech-dj: querying_devices was never set HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue"" 02 August 2013, 21:22:15 UTC
940e84f Linus Torvalds 02 August 2013, 21:21:44 UTC Merge tag 'please-pull-fix-mce-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull MCE fix from Tony Luck: "Fix a regression in mce-severity.c" * tag 'please-pull-fix-mce-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Fix mce regression from recent cleanup 02 August 2013, 21:21:44 UTC
aa8032b Linus Torvalds 02 August 2013, 20:12:52 UTC Merge tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Yinghai fixed a couple regressions: one resource assignment problem introduced in v3.10 that showed up with SR-IOV on powerpc, and another SR-IOV hot-remove issue related to refcounting changes we merged for v3.11. Yinghai is still working on another SR-IOV-related fix or two, which will be simpler if pciehp is non-modular, so I included the Kconfig changes now to get them in earlier. Finally, a minor fix for the ARM Marvell EBU host bridge driver that was merged for v3.11 Hotplug: PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device PCI: hotplug: Convert to be builtin only, not modular PCI: pciehp: Convert pciehp to be builtin only, not modular Resource allocation: PCI: Retry allocation of only the resource type that failed ARM: PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge" * tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge PCI: Retry allocation of only the resource type that failed PCI: pciehp: Convert pciehp to be builtin only, not modular PCI: hotplug: Convert to be builtin only, not modular PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device 02 August 2013, 20:12:52 UTC
1fe0135 Linus Torvalds 02 August 2013, 19:21:32 UTC Merge tag 'pm+acpi-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Revert two cpuidle commits added during the 3.8 development cycle that turn out to have introduced a significant performance regression as requested by Jeremy Eder. - The recent patches that made the freezer less heavy-weight introduced a regression causing user-space-driven hibernation using the ioctl() interface to block indefinitely when the hibernate process executes try_to_freeze(). Fix from Colin Cross addresses this by adding a process flag to mark the hibernate/suspend process to inform the freezer that that process should be ignored. - One of the recent cpufreq reverts uncovered a problem in the core causing the cpufreq driver module refcount to become negative after a system suspend-resume cycle. Fix from Rafael J Wysocki. - The evaluation of the ACPI battery _BIX method has never worked correctly, because the commit that added support for it forgot to take the "Revision" field in the return package into account. As a result, the reading of battery info doesn't work at all on some systems, which is addressed by a fix from Lan Tianyu. * tag 'pm+acpi-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: freezer: set PF_SUSPEND_TASK flag on tasks that call freeze_processes ACPI / battery: Fix parsing _BIX return value cpufreq: Fix cpufreq driver module refcount balance after suspend/resume Revert "cpuidle: Quickly notice prediction failure for repeat mode" Revert "cpuidle: Quickly notice prediction failure in general case" 02 August 2013, 19:21:32 UTC
697aeba Takashi Iwai 01 August 2013, 06:38:27 UTC ALSA: hda - Fix missing fixup for Mac Mini with STAC9221 A fixup for Apple Mac Mini was lost during the adaption to the generic parser because the fallback for the generic ID 8384:7680 was dropped, and it resulted in the silence output (and maybe other problems). Unfortunately, just adding the missing subsystem ID wasn't enough, in this case. The subsystem ID of this machine is 0000:0100 (what Apple thought...?), and since snd_hda_pick_fixup() doesn't take the vendor id zero into account, the driver ignored this entry. Now it's fixed to regard the vendor id zero as a valid value. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 August 2013, 06:16:52 UTC
7873814 Michael S. Tsirkin 01 August 2013, 10:50:10 UTC macvlan: handle set_promiscuity failures It's quite unlikely that dev_set_promiscuity will fail, but worth checking just in case. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 23:32:05 UTC
266e834 Michael S. Tsirkin 01 August 2013, 10:43:19 UTC macvlan: better mode validation macvlan passthrough mode is special: it's not possible to switch to or from it through a netlink command. But if you try, the command will succeed, which is confusing. Validate input and return error to user. Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 23:32:05 UTC
c756891 Ying Xue 01 August 2013, 12:29:18 UTC tipc: fix oops when creating server socket fails When creation of TIPC internal server socket fails, we get an oops with the following dump: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0011f49>] tipc_close_conn+0x59/0xb0 [tipc] PGD 13719067 PUD 12008067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: tipc(+) CPU: 4 PID: 4340 Comm: insmod Not tainted 3.10.0+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880014360000 ti: ffff88001374c000 task.ti: ffff88001374c000 RIP: 0010:[<ffffffffa0011f49>] [<ffffffffa0011f49>] tipc_close_conn+0x59/0xb0 [tipc] RSP: 0018:ffff88001374dc98 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff880012ac09d8 RCX: 0000000000000000 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffff880014360000 RBP: ffff88001374dcb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0016fa0 R13: ffffffffa0017010 R14: ffffffffa0017010 R15: ffff880012ac09d8 FS: 0000000000000000(0000) GS:ffff880016600000(0063) knlGS:00000000f76668d0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000012227000 CR4: 00000000000006e0 Stack: ffff88001374dcb8 ffffffffa0016fa0 0000000000000000 0000000000000001 ffff88001374dcf8 ffffffffa0012922 ffff88001374dce8 00000000ffffffea ffffffffa0017100 0000000000000000 ffff8800134241a8 ffffffffa0017150 Call Trace: [<ffffffffa0012922>] tipc_server_stop+0xa2/0x1b0 [tipc] [<ffffffffa0009995>] tipc_subscr_stop+0x15/0x20 [tipc] [<ffffffffa00130f5>] tipc_core_stop+0x1d/0x33 [tipc] [<ffffffffa001f0d4>] tipc_init+0xd4/0xf8 [tipc] [<ffffffffa001f000>] ? 0xffffffffa001efff [<ffffffff8100023f>] do_one_initcall+0x3f/0x150 [<ffffffff81082f4d>] ? __blocking_notifier_call_chain+0x7d/0xd0 [<ffffffff810cc58a>] load_module+0x11aa/0x19c0 [<ffffffff810c8d60>] ? show_initstate+0x50/0x50 [<ffffffff8190311c>] ? retint_restore_args+0xe/0xe [<ffffffff810cce79>] SyS_init_module+0xd9/0x110 [<ffffffff8190dc65>] sysenter_dispatch+0x7/0x1f Code: 6c 24 70 4c 89 ef e8 b7 04 8f e1 8b 73 04 4c 89 e7 e8 7c 9e 32 e1 41 83 ac 24 b8 00 00 00 01 4c 89 ef e8 eb 0a 8f e1 48 8b 43 08 <4c> 8b 68 20 4d 8d a5 48 03 00 00 4c 89 e7 e8 04 05 8f e1 4c 89 RIP [<ffffffffa0011f49>] tipc_close_conn+0x59/0xb0 [tipc] RSP <ffff88001374dc98> CR2: 0000000000000020 ---[ end trace b02321f40e4269a3 ]--- We have the following call chain: tipc_core_start() ret = tipc_subscr_start() ret = tipc_server_start(){ server->enabled = 1; ret = tipc_open_listening_sock() } I.e., the server->enabled flag is unconditionally set to 1, whatever the return value of tipc_open_listening_sock(). This causes a crash when tipc_core_start() tries to clean up resources after a failed initialization: if (ret == failed) tipc_subscr_stop() tipc_server_stop(){ if (server->enabled) tipc_close_conn(){ NULL reference of con->sock-sk OOPS! } } To avoid this, tipc_server_start() should only set server->enabled to 1 in case of a succesful socket creation. In case of failure, it should release all allocated resources before returning. Problem introduced in commit c5fa7b3cf3cb22e4ac60485fc2dc187fe012910f ("tipc: introduce new TIPC server infrastructure") in v3.11-rc1. Note that it won't be seen often; it takes a module load under memory constrained conditions in order to trigger the failure condition. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 22:54:33 UTC
c6c2401 Steven Rostedt (Red Hat) 04 July 2013, 03:33:51 UTC tracing/uprobes: Fail to unregister if probe event files are in use Uprobes suffer the same problem that kprobes have. There's a race between writing to the "enable" file and removing the probe. The probe checks for it being in use and if it is not, goes about deleting the probe and the event that represents it. But the problem with that is, after it checks if it is in use it can be enabled, and the deletion of the event (access to the probe) will fail, as it is in use. But the uprobe will still be deleted. This is a problem as the event can reference the uprobe that was deleted. The fix is to remove the event first, and check to make sure the event removal succeeds. Then it is safe to remove the probe. When the event exists, either ftrace or perf can enable the probe and prevent the event from being removed. Link: http://lkml.kernel.org/r/20130704034038.991525256@goodmis.org Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 01 August 2013, 22:25:50 UTC
e0d1095 Cong Wang 01 August 2013, 03:10:25 UTC net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL Eliezer renames several *ll_poll to *busy_poll, but forgets CONFIG_NET_LL_RX_POLL, so in case of confusion, rename it too. Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 22:11:17 UTC
dfcefb0 Cong Wang 01 August 2013, 03:10:24 UTC net: fix a compile error when CONFIG_NET_LL_RX_POLL is not set When CONFIG_NET_LL_RX_POLL is not set, I got: net/socket.c: In function ‘sock_poll’: net/socket.c:1165:4: error: implicit declaration of function ‘sk_busy_loop’ [-Werror=implicit-function-declaration] Fix this by adding a nop when !CONFIG_NET_LL_RX_POLL. Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 22:10:58 UTC
b305132 Jack Morgenstein 01 August 2013, 16:55:01 UTC net/mlx4_core: VFs must ignore the enable_64b_cqe_eqe module param Slaves get the 64B CQE/EQE state from QUERY_HCA, not from the module parameter. If the parameter is set to zero, the slave outputs an incorrect/irrelevant warning message that 64B CQEs/EQEs are supported but not enabled (even if the hypervisor has enabled 64B CQEs/EQEs). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 22:09:36 UTC
0508ad6 Or Gerlitz 01 August 2013, 16:55:00 UTC net/mlx4_core: Don't give VFs MAC addresses which are derived from the PF MAC If the user has not assigned a MAC address to a VM, then don't give it MAC which is based on the PF one. The current derivation scheme is wrong and leads to VM MAC collisions when the number of cards/hypervisors becomes big enough. Instead, just give it zeros and let them figure out what to do with that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 22:09:35 UTC
8a226b2 Jiri Benc 01 August 2013, 08:41:28 UTC ipv6: prevent race between address creation and removal There's a race in IPv6 automatic addess assignment. The address is created with zero lifetime when it's added to various address lists. Before it gets assigned the correct lifetime, there's a window where a new address may be configured. This causes the semi-initiated address to be deleted in addrconf_verify. This was discovered as a reference leak caused by concurrent run of __ipv6_ifa_notify for both RTM_NEWADDR and RTM_DELADDR with the same address. Fix this by setting the lifetime before the address is added to inet6_addr_lst. A few notes: 1. In addrconf_prefix_rcv, by setting update_lft to zero, the if (update_lft) { ... } condition is no longer executed for newly created addresses. This is okay, as the ifp fields are set in ipv6_add_addr now and ipv6_ifa_notify is called (and has been called) through addrconf_dad_start. 2. The removal of the whole block under ifp->lock in inet6_addr_add is okay, too, as tstamp is initialized to jiffies in ipv6_add_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 21:16:20 UTC
3f8f529 Jiri Pirko 01 August 2013, 08:41:27 UTC ipv6: move peer_addr init into ipv6_add_addr() Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 21:16:20 UTC
49a18d8 Michal Kubeček 01 August 2013, 08:04:24 UTC ipv6: update ip6_rt_last_gc every time GC is run As pointed out by Eric Dumazet, net->ipv6.ip6_rt_last_gc should hold the last time garbage collector was run so that we should update it whenever fib6_run_gc() calls fib6_clean_all(), not only if we got there from ip6_dst_gc(). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 21:16:20 UTC
2ac3ac8 Michal Kubeček 01 August 2013, 08:04:14 UTC ipv6: prevent fib6_run_gc() contention On a high-traffic router with many processors and many IPv6 dst entries, soft lockup in fib6_run_gc() can occur when number of entries reaches gc_thresh. This happens because fib6_run_gc() uses fib6_gc_lock to allow only one thread to run the garbage collector but ip6_dst_gc() doesn't update net->ipv6.ip6_rt_last_gc until fib6_run_gc() returns. On a system with many entries, this can take some time so that in the meantime, other threads pass the tests in ip6_dst_gc() (ip6_rt_last_gc is still not updated) and wait for the lock. They then have to run the garbage collector one after another which blocks them for quite long. Resolve this by replacing special value ~0UL of expire parameter to fib6_run_gc() by explicit "force" parameter to choose between spin_lock_bh() and spin_trylock_bh() and call fib6_run_gc() with force=false if gc_thresh is reached but not max_size. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 21:16:20 UTC
36dd1f3 Thomas Petazzoni 01 August 2013, 13:44:19 UTC PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge The Marvell PCIe driver uses an emulated PCI-to-PCI bridge to be able to dynamically set up MBus address decoding windows for PCI I/O and memory regions depending on the PCI devices enumerated by Linux. However, this emulated PCI-to-PCI bridge logic makes the Linux PCI core believe that prefetchable memory regions are supported (because the registers are read/write), while in fact no adress decoding window is ever created for such regions. Since the Marvell MBus address decoding windows do not distinguish memory regions and prefetchable memory regions, this patch takes a simple approach: change the PCI-to-PCI bridge emulation to let the Linux PCI core know that we don't support prefetchable memory regions. To achieve this, we simply make the prefetchable memory base a read-only register that always returns 0. Reading/writing all the other prefetchable memory related registers has no effect. This problem was originally reported by Finn Hoffmann <finn@uni-bremen.de>, who couldn't get a RTL8111/8168B PCI NIC working on the NSA310 Kirkwood platform after updating to 3.11-rc. The problem was that the PCI-to-PCI bridge emulation was making the Linux PCI core believe that we support prefetchable memory, so the Linux PCI core was only filling the prefetchable memory base and limit registers, which does not lead to a MBus window being created. The below patch has been confirmed by Finn Hoffmann to fix his problem on Kirkwood, and has otherwise been successfully tested on the Armada XP GP platform with a e1000e PCIe NIC and a Marvell SATA PCIe card. Reported-by: Finn Hoffmann <finn@uni-bremen.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 01 August 2013, 20:47:54 UTC
1f1059f David S. Miller 01 August 2013, 19:57:52 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This pull request is intended for the 3.11 stream. It is a bit larger than usual, as it includes pulls from most of my feeder trees as well... For the Bluetooth bits, Gustavo says: "A few fixes and devices ID additions for 3.11: * There are 4 new ath3k device ids * Fixed stack memory usage in ath3k. * Fixed the init process of BlueFRITZ! devices, they were failing to init due to an unsupported command we sent. * Fixed wrong use of PTR_ERR in btusb code that was preventing intel devices to work properly. * Fixed race condition between hci_register_dev() and hci_dev_open() that could cause a NULL pointer dereference. * Fixed race condition that could call hci_req_cmd_complete() and make some devices to fail as showed in the log added to the commit message." Regarding the NFC bits, Samuel says: "We have: 1) A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. 2) A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command to CMD_FW_DOWNLOAD." Samuel's item #2 isn't strictly a fix, but it seems safe and should avoid confusion in the future. As for the mac80211 bits, Johannes says: "I only have three fixes this time, a fix for a suspend regression, a patch correcting the initiator in regulatory code and one fix for mesh station powersave." With respect to the iwlwifi bits, Johannes says: "We have a scan fix for passive channels, a new PCI device ID for an old device, a NIC reset fix, an RF-Kill fix, a fix for powersave when GO interfaces are present as well as an aggregation session fix (for a corner case) and a workaround for a firmware design issue - it only supports a single GTK in D3." Bringing-up the rear with the Atheros trees, Kalle says: "Geert Uytterhoeven fixed an ath10k build problem when NO_DMA=y. I added a missing MAINTAINERS entry for ath10k and updated ath6kl git tree location." Along with the above... Arend van Spriel fixes a brcmfmac WARNING when unplugging the device. Avinash Patil proves a couple of minor mwifiex fixes relating to P2P mode. Luciano Coelho updates the MAINTAINERS entry for the wilink drivers. Stanislaw Gruszka brings an rt2x00 fix for a queue start/stop problem. Stone Piao fixes another mwifiex problem, a command timeout related to P2P mode. Tomasz Moń corrects an endian problem in mwifiex. I'll remind my feeder maintainers to slowdown the patchflow. Beyond that, please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 August 2013, 19:57:52 UTC
24195ca Russell King 01 August 2013, 19:51:13 UTC Merge branch 'security-fixes' into fixes 01 August 2013, 19:51:13 UTC
22e02a0 John W. Linville 01 August 2013, 18:30:59 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 01 August 2013, 18:30:59 UTC
2449189 Russell King 31 July 2013, 10:37:17 UTC ARM: Add .text annotations where required after __CPUINIT removal Commit 8bd26e3a7 (arm: delete __cpuinit/__CPUINIT usage from all ARM users) caused some code to leak into sections which are discarded through the removal of __CPUINIT annotations. Add appropriate .text annotations to bring these back into the kernel text. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 01 August 2013, 13:41:40 UTC
44424c3 Stephen Boyd 30 July 2013, 22:09:46 UTC ARM: 7803/1: Fix deadlock scenario with smp_send_stop() If one process calls sys_reboot and that process then stops other CPUs while those CPUs are within a spin_lock() region we can potentially encounter a deadlock scenario like below. CPU 0 CPU 1 ----- ----- spin_lock(my_lock) smp_send_stop() <send IPI> handle_IPI() disable_preemption/irqs while(1); <PREEMPT> spin_lock(my_lock) <--- Waits forever We shouldn't attempt to run any other tasks after we send a stop IPI to a CPU so disable preemption so that this task runs to completion. We use local_irq_disable() here for cross-arch consistency with x86. Reported-by: Sundarajan Srinivasan <sundaraj@codeaurora.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 01 August 2013, 13:41:39 UTC
a5463cd Russell King 31 July 2013, 20:58:56 UTC ARM: make vectors page inaccessible from userspace If kuser helpers are not provided by the kernel, disable user access to the vectors page. With the kuser helpers gone, there is no reason for this page to be visible to userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 01 August 2013, 13:31:58 UTC
48be69a Russell King 23 July 2013, 23:29:18 UTC ARM: move signal handlers into a vdso-like page Move the signal handlers into a VDSO page rather than keeping them in the vectors page. This allows us to place them randomly within this page, and also map the page at a random location within userspace further protecting these code fragments from ROP attacks. The new VDSO page is also poisoned in the same way as the vector page. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 01 August 2013, 13:31:56 UTC
7193bd1 J. Bruce Fields 31 July 2013, 21:51:42 UTC svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall The change made to rsc_parse() in 0dc1531aca7fd1440918bd55844a054e9c29acad "svcrpc: store gss mech in svc_cred" should also have been propagated to the gss-proxy codepath. This fixes a crash in the gss-proxy case. Signed-off-by: J. Bruce Fields <bfields@redhat.com> 01 August 2013, 12:42:01 UTC
743e217 J. Bruce Fields 31 July 2013, 18:11:14 UTC svcrpc: fix kfree oops in gss-proxy code mech_oid.data is an array, not kmalloc()'d memory. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> 01 August 2013, 12:41:29 UTC
dc43376 J. Bruce Fields 07 June 2013, 14:11:19 UTC svcrpc: fix gss-proxy xdr decoding oops Uninitialized stack data was being used as the destination for memcpy's. Longer term we'll just delete some of this code; all we're doing is skipping over xdr that we don't care about. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> 01 August 2013, 12:40:42 UTC
9f96392 J. Bruce Fields 10 June 2013, 20:06:44 UTC svcrpc: fix gss_rpc_upcall create error Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> 01 August 2013, 12:39:30 UTC
447383d NeilBrown 25 July 2013, 01:30:23 UTC NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure. Since we enabled auto-tuning for sunrpc TCP connections we do not guarantee that there is enough write-space on each connection to queue a reply. If memory pressure causes the window to shrink too small, the request throttling in sunrpc/svc will not accept any requests so no more requests will be handled. Even when pressure decreases the window will not grow again until data is sent on the connection. This means we get a deadlock: no requests will be handled until there is more space, and no space will be allocated until a request is handled. This can be simulated by modifying svc_tcp_has_wspace to inflate the number of byte required and removing the 'svc_sock_setbufsize' calls in svc_setup_socket. I found that multiplying by 16 was enough to make the requirement exceed the default allocation. With this modification in place: mount -o vers=3,proto=tcp 127.0.0.1:/home /mnt would block and eventually time out because the nfs server could not accept any requests. This patch relaxes the request throttling to always allow at least one request through per connection. It does this by checking both sk_stream_min_wspace() and xprt->xpt_reserved are zero. The first is zero when the TCP transmit queue is empty. The second is zero when there are no RPC requests being processed. When both of these are zero the socket is idle and so one more request can safely be allowed through. Applying this patch allows the above mount command to succeed cleanly. Tracing shows that the allocated write buffer space quickly grows and after a few requests are handled, the extra tests are no longer needed to permit further requests to be processed. The main purpose of request throttling is to handle the case when one client is slow at collecting replies and the send queue gets full of replies that the client hasn't acknowledged (at the TCP level) yet. As we only change behaviour when the send queue is empty this main purpose is still preserved. Reported-by: Ben Myers <bpm@sgi.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> 01 August 2013, 12:39:16 UTC
2865a8f Shaohua Li 01 August 2013, 01:56:36 UTC workqueue: copy workqueue_attrs with all fields $echo '0' > /sys/bus/workqueue/devices/xxx/numa $cat /sys/bus/workqueue/devices/xxx/numa I got 1. It should be 0, the reason is copy_workqueue_attrs() called in apply_workqueue_attrs() doesn't copy no_numa field. Fix it by making copy_workqueue_attrs() copy ->no_numa too. This would also make get_unbound_pool() set a pool's ->no_numa attribute according to the workqueue attributes used when the pool was created. While harmelss, as ->no_numa isn't a pool attribute, this is a bit confusing. Clear it explicitly. tj: Updated description and comments a bit. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org 01 August 2013, 12:36:40 UTC
back to top