https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
c0a5f4a drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01 The reset date of the ST Micro version of PL031 is 2000-01-01. The correct weekday for 2000-01-01 is saturday, but pl031 is initialized to sunday. This may lead to alarm malfunction, so configure the correct wday if RTC_DR indicates reset. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2012, 01:00:51 UTC
1be5f0b Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull slave-dmaengine fixes fromVinod Koul: "fixes of cylic dma usages in slave dma drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fix cyclic dma usage dmaengine: pl330: dont complete descriptor for cyclic dma 17 May 2012, 16:57:13 UTC
42e8b9c Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull last minute virtio fixes from Michael S. Tsirkin: "Here are a couple of last minute virtio fixes for 3.4. Hope it's not too late yes - I might have tried too hard to make sure the fix is well tested. Fixes are by Amit and myself. One fixes module removal and one suspend of a VM, the last one the handling of out of memory condition. They are thus very low risk as most people never hit these paths, but do fix very annoying problems for people that do use the feature. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: invoke softirqs after __napi_schedule virtio: balloon: let host know of updated balloon size before module removal virtio: console: tell host of open ports after resume from s3/s4 17 May 2012, 16:55:58 UTC
674ff51 Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC fixes from Olof Johansson: "I will stop trying to predict when we're done with fixes for a release. Here's another small batch of three patches for arm-soc: - A fix for a boot time WARN_ON() due to irq domain conversion on PRIMA2 - Fix for a regression in Tegra SMP spinup code due to swapped register offsets - Fixed config dependency for mv_cesa crypto driver to avoid build breakage" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller crypto: mv_cesa requires on CRYPTO_HASH to build ARM: tegra: Fix flow controller accesses 17 May 2012, 16:46:07 UTC
36a1987 Merge tag 'md-3.4-fixes' of git://neil.brown.name/md Pull two md fixes from NeilBrown: "One fixes a bug in the new raid10 resize code so is relevant to 3.4 only. The other fixes a bug in the use of md by dm-raid, so is relevant to any kernel with dm-raid support" * tag 'md-3.4-fixes' of git://neil.brown.name/md: MD: Add del_timer_sync to mddev_suspend (fix nasty panic) md/raid10: set dev_sectors properly when resizing devices in array. 17 May 2012, 16:44:35 UTC
31ae983 Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, x86 and scheduler updates from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing: Do not enable function event with enable perf stat: handle ENXIO error for perf_event_open perf: Turn off compiler warnings for flex and bison generated files perf stat: Fix case where guest/host monitoring is not supported by kernel perf build-id: Fix filename size calculation * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable x86: Fix section annotation of acpi_map_cpu2node() x86/microcode: Ensure that module is only loaded on supported Intel CPUs * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption 17 May 2012, 16:35:17 UTC
ec13ee8 virtio_net: invoke softirqs after __napi_schedule __napi_schedule might raise softirq but nothing causes do_softirq to trigger, so it does not in fact run. As a result, the error message "NOHZ: local_softirq_pending 08" sometimes occurs during boot of a KVM guest when the network service is started and we are oom: ... Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0...NOHZ: local_softirq_pending 08 done. [ OK ] ... Further, receive queue processing might get delayed indefinitely until some interrupt triggers: virtio_net expected napi to be run immediately. One way to cause do_softirq to be executed is by invoking local_bh_enable(). As __napi_schedule is normally called from bh or irq context, this seems to make sense: disable bh before __napi_schedule and enable afterwards. In fact it's a very complicated way of calling do_softirq(), and works since this function is only used when we are not in interrupt context. It's not hot at all, in any ideal scenario. Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Tested-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> 17 May 2012, 09:16:38 UTC
b8ae0eb virtio: balloon: let host know of updated balloon size before module removal When the balloon module is removed, we deflate the balloon, reclaiming all the pages that were given to the host. However, we don't update the config values for the new balloon size, resulting in the host showing outdated balloon values. The size update is done after each leak and fill operation, only the module removal case was left out. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 17 May 2012, 09:14:34 UTC
fa8b66c virtio: console: tell host of open ports after resume from s3/s4 If a port was open before going into one of the sleep states, the port can continue normal operation after restore. However, the host has to be told that the guest side of the connection is open to restore pre-suspend state. This wasn't noticed so far due to a bug in qemu that was fixed recently (which marked the guest-side connection as always open). CC: stable@vger.kernel.org # Only for 3.3 Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 17 May 2012, 09:14:33 UTC
ad3b8a8 ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller the old codes will cause 3.4 kernel warning as irq domain size is wrong: ------------[ cut here ]------------ WARNING: at kernel/irq/irqdomain.c:74 irq_domain_legacy_revmap+0x24/0x48() Modules linked in: [<c0013f50>] (unwind_backtrace+0x0/0xf8) from [<c001e7d8>] (warn_slowpath_common+0x54/0x64) [<c001e7d8>] (warn_slowpath_common+0x54/0x64) from [<c001e804>] (warn_slowpath_null+0x1c/0x24) [<c001e804>] (warn_slowpath_null+0x1c/0x24) from [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) from [<c005c704>] (irq_create_mapping+0x20/0x120) [<c005c704>] (irq_create_mapping+0x20/0x120) from [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) from [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) from [<c01a6c68>] (of_irq_to_resource+0x18/0x74) [<c01a6c68>] (of_irq_to_resource+0x18/0x74) from [<c01a6ce8>] (of_irq_count+0x24/0x34) [<c01a6ce8>] (of_irq_count+0x24/0x34) from [<c01a7220>] (of_device_alloc+0x58/0x158) [<c01a7220>] (of_device_alloc+0x58/0x158) from [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) from [<c01a7468>] (of_platform_bus_create+0xc8/0x190) [<c01a7468>] (of_platform_bus_create+0xc8/0x190) from [<c01a74cc>] (of_platform_bus_create+0x12c/0x190) ---[ end trace 1b75b31a2719ed32 ]--- Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net> 17 May 2012, 04:52:13 UTC
0d9f4f1 MD: Add del_timer_sync to mddev_suspend (fix nasty panic) Use del_timer_sync to remove timer before mddev_suspend finishes. We don't want a timer going off after an mddev_suspend is called. This is especially true with device-mapper, since it can call the destructor function immediately following a suspend. This results in the removal (kfree) of the structures upon which the timer depends - resulting in a very ugly panic. Therefore, we add a del_timer_sync to mddev_suspend to prevent this. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de> 17 May 2012, 00:38:24 UTC
6508fdb md/raid10: set dev_sectors properly when resizing devices in array. raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de> 17 May 2012, 00:08:45 UTC
0e93b4b Merge git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm powerpc fixes from Marcelo Tosatti: "Urgent KVM PPC updates, quoting Alexander Graf: There are a few bugs in 3.4 that really should be fixed before people can be all happy and fuzzy about KVM on PowerPC. These fixes are: * fix POWER7 bare metal with PR=y * fix deadlock on HV=y book3s_64 mode in low memory cases * fix invalid MMU scope of PR=y mode on book3s_64, possibly eading to memory corruption" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM KVM: PPC: Book3S: PR: Fix hsrr code KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Book3S: PR: Handle EMUL_ASSIST 16 May 2012, 21:30:51 UTC
b724cc1 Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute regression fixes for 3.4 final kernel. All trivial, and Cc'ed to stable kernel." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8994: Fix AIF2ADC power down ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB 16 May 2012, 21:29:45 UTC
f8fc341 Merge tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc fix from Ohad Ben-Cohen: "Fix a nasty off-by-one remoteproc bug which leaks memory when a remote processor is shut down and, on certain circumstances, can indirectly prevent it from being reloaded." * tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: fix off-by-one bug in __rproc_free_vrings 16 May 2012, 21:26:05 UTC
dfae359 Merge git://git.samba.org/sfrench/cifs-2.6 Pull CIFS fix from Jeff Layton * git://git.samba.org/sfrench/cifs-2.6: cifs: fix misspelling of "forcedirectio" 16 May 2012, 21:22:38 UTC
39d6411 Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull two Tile arch fixes from Chris Metcalf: "These are both bug-fixes, one to avoid some issues in how we invoke the "pending userspace work" flags on return to userspace, and the other to provide the same signal handler arguments for tilegx32 that we do for tilegx64." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: apply commit 74fca9da0 to the compat signal handling as well arch/tile: fix up some issues in calling do_work_pending() 16 May 2012, 21:21:41 UTC
8011652 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking tree from David Miller: 1) ptp_pch driver build broke during this merge window due to missing slab.h header, fix from Geery Uytterhoeven. 2) If ipset passes in a bogus hash table size we crash because the size is not validated properly. Compounding this, gcc-4.7 can miscompile ipset such that even when the user specifies legitimate parameters the tool passes in an out-of-range size to the kernel. Fix from Jozsef Kadlecsik. 3) Users have reported that the netdev watchdog can trigger with pch_gbe devices, and it turns out this is happening because of races in the TX path of the driver leading to the transmitter hanging. Fix from Eric Dumazet, reported and tested by Andy Cress. 4) Novatel USB551L devices match the generic class entries for the cdc ethernet USB driver, but they don't work because they have generic descriptors and thus need FLAG_WWAN to function properly. Add the necessary ID table entry to fix this, from Dan Williams. 5) A recursive locking fix in the USBNET driver added a new problem, in that packet list traversal is now racy and we can thus access unlinked SKBs and crash. Avoid this situation by adding some extra state tracking, from Ming Lei. 6) The rtlwifi conversion to asynchronous firmware loading is racy, fix by reordering the probe procedure. From Larry Finger. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43187 7) Fix regressions with bluetooth keyboards by notifying userland properly when the security level changes, from Gustavo Padovan. 8) Bluetooth needs to make sure device connected events are emitted before other kinds of events, otherwise userspace will think there is no baseband link yet and therefore abort the sockets associated with that connection. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ipset: fix hash size checking in kernel ptp_pch: Add missing #include <linux/slab.h> pch_gbe: fix transmit races cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN usbnet: fix skb traversing races during unlink(v2) Bluetooth: mgmt: Fix device_connected sending order Bluetooth: notify userspace of security level change rtlwifi: fix for race condition when firmware is cached 16 May 2012, 20:14:52 UTC
a134d22 arch/tile: apply commit 74fca9da0 to the compat signal handling as well This passes siginfo and mcontext to tilegx32 signal handlers that don't have SA_SIGINFO set just as we have been doing for tilegx64. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> 16 May 2012, 20:01:45 UTC
fc327e2 arch/tile: fix up some issues in calling do_work_pending() First, we were at risk of handling thread-info flags, in particular do_signal(), when returning from kernel space. This could happen after a failed kernel_execve(), or when forking a kernel thread. The fix is to test in do_work_pending() for user_mode() and return immediately if so; we already had this test for one of the flags, so I just hoisted it to the top of the function. Second, if a ptraced process updated the callee-saved registers in the ptregs struct and then processed another thread-info flag, we would overwrite the modifications with the original callee-saved registers. To fix this, we add a register to note if we've already saved the registers once, and skip doing it on additional passes through the loop. To avoid a performance hit from the couple of extra instructions involved, I modified the GET_THREAD_INFO() macro to be guaranteed to be one instruction, then bundled it with adjacent instructions, yielding an overall net savings. Reported-By: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> 16 May 2012, 20:01:16 UTC
26a5d3c netfilter: ipset: fix hash size checking in kernel The hash size must fit both into u32 (jhash) and the max value of size_t. The missing checking could lead to kernel crash, bug reported by Seblu. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 May 2012, 19:38:49 UTC
769b0da ptp_pch: Add missing #include <linux/slab.h> drivers/ptp/ptp_pch.c: In function 'pch_remove': drivers/ptp/ptp_pch.c:576:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] drivers/ptp/ptp_pch.c: In function 'pch_probe': drivers/ptp/ptp_pch.c:587:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 May 2012, 18:44:44 UTC
531c8ff cifs: fix misspelling of "forcedirectio" ...and add a "directio" synonym since that's what the manpage has always advertised. Acked-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 16 May 2012, 16:26:25 UTC
1fb372f Merge branch 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes * 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Fix flow controller accesses Signed-off-by: Arnd Bergmann <arnd@arndb.de> 16 May 2012, 13:47:11 UTC
139abbf Merge branch 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux into fixes * 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux: crypto: mv_cesa requires on CRYPTO_HASH to build Signed-off-by: Arnd Bergmann <arnd@arndb.de> 16 May 2012, 13:44:34 UTC
51bfd29 KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates When handling the H_BULK_REMOVE hypercall, we were forgetting to invalidate and unlock the hashed page table entry (HPTE) in the case where the page had been paged out. This fixes it by clearing the first doubleword of the HPTE in that case. This fixes a regression introduced in commit a92bce95f0 ("KVM: PPC: Book3S HV: Keep HPTE locked when invalidating"). The effect of the regression is that the host kernel will sometimes hang when under memory pressure. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> 16 May 2012, 13:02:12 UTC
ffe3649 powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM The code forgot to scramble the VSIDs the way we normally do and was basically using the "proto VSID" directly with the MMU. This means that in practice, KVM used random VSIDs that could collide with segments used by other user space programs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [agraf: simplify ppc32 case] Signed-off-by: Alexander Graf <agraf@suse.de> 16 May 2012, 13:02:11 UTC
32c7dbf KVM: PPC: Book3S: PR: Fix hsrr code When jumping back into the kernel to code that knows that it would be using HSRR registers instead of SRR registers, we need to make sure we pass it all information on where to jump to in HSRR registers. Unfortunately, we used r10 to store the information to distinguish between the HSRR and SRR case. That register got clobbered in between though, rendering the later comparison invalid. Instead, let's use cr1 to store this information. That way we don't need yet another register and everyone's happy. This fixes PR KVM on POWER7 bare metal for me. Signed-off-by: Alexander Graf <agraf@suse.de> 16 May 2012, 13:02:11 UTC
56e13db KVM: PPC: Fix PR KVM on POWER7 bare metal When running on a system that is HV capable, some interrupts use HSRR SPRs instead of the normal SRR SPRs. These are also used in the Linux handlers to jump back to code after an interrupt got processed. Unfortunately, in our "jump back to the real host handler after we've done the context switch" code, we were only setting the SRR SPRs, rendering Linux to jump back to some invalid IP after it's processed the interrupt. This fixes random crashes on p7 opal mode with PR KVM for me. Signed-off-by: Alexander Graf <agraf@suse.de> 16 May 2012, 13:02:10 UTC
7ef4e98 KVM: PPC: Book3S: PR: Handle EMUL_ASSIST In addition to normal "priviledged instruction" traps, we can also receive "emulation assist" traps on newer hardware that has the HV bit set. Handle that one the same way as a privileged instruction, including the instruction fetching. That way we don't execute old instructions that we happen to still leave in that field when an emul assist trap comes. This fixes -M mac99 / -M g3beige on p7 bare metal for me. Signed-off-by: Alexander Graf <agraf@suse.de> 16 May 2012, 13:02:10 UTC
d0cad88 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John Linville says: Here are three more fixes that some of my developers are desperate to see included in 3.4... Johan Hedberg went to some length justifyng the inclusion of these two Bluetooth fixes: "The device_connected fix should be quite self-explanatory, but it's actually a wider issue than just for keyboards. All profiles that do incoming connection authorization (e.g. headsets) will break without it with specific hardware. The reason it wasn't caught earlier is that it only occurs with specific Bluetooth adapters. As for the security level patch, this fixes L2CAP socket based security level elevation during a connection. The HID profile needs this (for keyboards) and it is the only way to achieve the security level elevation when using the management interface to talk to the kernel (hence the management enabling patch being the one that exposes this" The rtlwifi fix addresses a regression related to firmware loading, as described in kernel.org bug 43187. It basically just moves a hunk of code to a more appropriate place. Signed-off-by: David S. Miller <davem@davemloft.net> 16 May 2012, 05:04:07 UTC
568b445 mn10300/CPU hotplug: Add missing call to notify_cpu_starting() The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 May 2012, 01:16:57 UTC
ec2e0f9 parisc/CPU hotplug: Add missing call to notify_cpu_starting() The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-and-Tested-by: Mikulas Patocka <mpatocka@redhat.com> Acked-and-Tested-by: Tobias Ulmer <tobiasu@tmux.org> Tested-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 May 2012, 01:16:57 UTC
6037463 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 15 May 2012, 20:38:00 UTC
21363cf Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute fixes Some last minute fixes for ASoC. Small, focused changes to specific drivers. 15 May 2012, 19:05:45 UTC
3ab77bf pch_gbe: fix transmit races Andy reported pch_gbe triggered "NETDEV WATCHDOG" errors. May 11 11:06:09 kontron kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x1ec/0x200() (Not tainted) May 11 11:06:09 kontron kernel: Hardware name: N/A May 11 11:06:09 kontron kernel: NETDEV WATCHDOG: eth0 (pch_gbe): transmit queue 0 timed out It seems pch_gbe has a racy tx path (races with TX completion path) Remove tx_queue_lock lock since it has no purpose, we must use tx_lock instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andy Cress <andy.cress@us.kontron.com> Tested-by: Andy Cress <andy.cress@us.kontron.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 May 2012, 17:41:43 UTC
4e6304b cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN Needs to be tagged with FLAG_WWAN, which since it has generic descriptors, won't happen if we don't override the generic driver info. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable@vger.kernel.org Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 May 2012, 17:41:43 UTC
5b6e9bc usbnet: fix skb traversing races during unlink(v2) Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock before unlink, but may cause skb traversing races: - after URB is unlinked and the queue lock is released, the refered skb and skb->next may be moved to done queue, even be released - in skb_queue_walk_safe, the next skb is still obtained by next pointer of the last skb - so maybe trigger oops or other problems This patch extends the usage of entry->state to describe 'start_unlink' state, so always holding the queue(rx/tx) lock to change the state if the referd skb is in rx or tx queue because we need to know if the refered urb has been started unlinking in unlink_urbs. The other part of this patch is based on Huajun's patch: always traverse from head of the tx/rx queue to get skb which is to be unlinked but not been started unlinking. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 15 May 2012, 17:41:42 UTC
c7f5f23 ASoC: wm8994: Fix AIF2ADC power down Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org 15 May 2012, 17:29:30 UTC
3911ff3 genirq: export handle_edge_irq() and irq_to_desc() Export handle_edge_irq() and irq_to_desc() to modules to allow them to do things such as __irq_set_handler_locked(...., handle_edge_irq); This fixes ERROR: "handle_edge_irq" [drivers/gpio/gpio-pch.ko] undefined! ERROR: "irq_to_desc" [drivers/gpio/gpio-pch.ko] undefined! when gpio-pch is being built as a module. This was introduced by commit df9541a60af0 ("gpio: pch9: Use proper flow type handlers") that added __irq_set_handler_locked(d->irq, handle_edge_irq); but handle_edge_irq() was not exported for modules (and inlined __irq_set_handler_locked() requires irq_to_desc() exported as well) Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 May 2012, 15:10:07 UTC
b0791dd ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops BIOS on some HP laptops don't set the speaker-pins as fixed but expose as jacks, and this confuses the driver as if these pins are jack-detectable. As a result, the machine doesn't get sounds from speakers because the driver prepares the power-map update via jack unsol events which never come up in reality. The bug was introduced in some time in 3.2 for enabling the power-mapping feature. This patch fixes the problem by replacing the check of the persistent power-map bits with a proper is_jack_detectable() call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43240 Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de> 15 May 2012, 06:14:36 UTC
d411605 dmaengine: fix cyclic dma usage for cyclic dma, dont makr the descriptor as complte. Fix the remaining users of cyclic dma which do so Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Mika Westerberg <mika.westerberg@iki.fi> 15 May 2012, 03:13:40 UTC
1ebfefc crypto: mv_cesa requires on CRYPTO_HASH to build Without CRYPTO_HASH being selected, mv_cesa has a lot of hooks into undefined exports. ---- MODPOST 81 modules Kernel: arch/arm/boot/Image is ready AS arch/arm/boot/compressed/head.o GZIP arch/arm/boot/compressed/piggy.gzip CC arch/arm/boot/compressed/misc.o CC arch/arm/boot/compressed/decompress.o ERROR: "crypto_ahash_type" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_shash_final" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_register_ahash" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_unregister_ahash" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_shash_update" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_shash_digest" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_shash_setkey" [drivers/crypto/mv_cesa.ko] undefined! ERROR: "crypto_alloc_shash" [drivers/crypto/mv_cesa.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 make: *** Waiting for unfinished jobs.... ---- Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org 15 May 2012, 01:10:06 UTC
b6255ee Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For a some fix patches for v3.4, including a regression fix at DVB core" Fix up trivial conflicts in Documentation/feature-removal-schedule.txt * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] gspca - sonixj: Fix a zero divide in isoc interrupt [media] media: videobuf2-dma-contig: include header for exported symbols [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer [media] media: vb2-memops: Export vb2_get_vma symbol [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS [media] s5p-fimc: Fix locking in subdev set_crop op [media] dvb_frontend: fix a regression with DVB-S zig-zag [media] fintek-cir: change || to && [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal [media] rc: Postpone ISR registration [media] marvell-cam: fix an ARM build error [media] V4L: soc-camera: protect hosts during probing from overzealous user-space 14 May 2012, 18:23:37 UTC
d69c5c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "The main purpose of this pull request is to fix up the erroneous bonding patch I applied last round. I meant to apply v4 of the patch from Jiri but I applied v3 by accident. Mea culpa. Also, eagle eyed Dan Carpenter noticed that openvswitch has one of those "X = alloc(); if (!Y)" mistakes, test the proper pointer instead." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: openvswitch: checking wrong variable in queue_userspace_packet() bonding: Fix LACPDU rx_dropped commit. 14 May 2012, 18:19:32 UTC
671267b Bluetooth: mgmt: Fix device_connected sending order The mgmt_ev_device_connected signal must be sent before any event indications happen for sockets associated with the connection. Otherwise e.g. device authorization for the sockets will fail with ENOTCONN as user space things that there is no baseband link. This patch fixes the issue by ensuring that the device_connected event if sent (if it hasn't been so already) as soon as the first ACL data packet arrives from the remote device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 14 May 2012, 17:56:15 UTC
a7d7723 Bluetooth: notify userspace of security level change It fixes L2CAP socket based security level elevation during a connection. The HID profile needs this (for keyboards) and it is the only way to achieve the security level elevation when using the management interface to talk to the kernel (hence the management enabling patch being the one that exposes this issue). It enables the userspace a security level change when the socket is already connected and create a way to notify the socket the result of the request. At the moment of the request the socket is made non writable, if the request fails the connections closes, otherwise the socket is made writable again, POLL_OUT is emmited. Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 14 May 2012, 17:51:25 UTC
574e02a rtlwifi: fix for race condition when firmware is cached In commit b0302ab, the rtlwifi family of drivers was converted to use asynchronous firmware loading. Unfortumately, the implementation was racy, and the ieee80211 routines could be started before rtl_init_core() was called to setup the data. This patch fixes the bug noted in https://bugzilla.kernel.org/show_bug.cgi?id=43187. Reported-by: Joshua Roys <Joshua.Roys@gtri.gatech.edu> Tested-by: Neptune Ning <frostyplanet@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.3] Signed-off-by: John W. Linville <linville@tuxdriver.com> 14 May 2012, 17:51:24 UTC
c3709e6 x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable We set cpuid_level to -1 if there is no CPUID instruction (only possible on i386). Signed-off-by: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/20120514174059.30236.1064.stgit@bluebook Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=12122 Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 14 May 2012, 17:49:32 UTC
eea41ae tty: Fix LED error return 3.4-rc introduced a regression when setting the LEDS. We do the right thing but then return an error code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144 Reported-by: Christian Casteyde Signed-off-by: Alan Cox <alan@linux/intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 May 2012, 17:43:24 UTC
97e7abc ARM: tegra: Fix flow controller accesses flowctrl_write_cpu_csr uses the cpu halt offsets and vice versa. This patch fixes this bug. Reported-by: Dan Willemsen <dwillemsen@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [swarren: This problem was introduced in v3.4-rc1, in commit 26fe681 "ARM: tegra: functions to access the flowcontroller", when this file was first added] Signed-off-by: Stephen Warren <swarren@nvidia.com> 14 May 2012, 16:22:01 UTC
6fd98c1 remoteproc: fix off-by-one bug in __rproc_free_vrings Fix a nasty off-by-one bug in __rproc_free_vrings which resulted in a memory leak and (for some platforms) failures to reload the remote processor. Signed-off-by: Subramaniam Chanderashekarapuram <subramaniam.ca@ti.com> [ohad@wizery.com: reword commit log, stick with the for loop] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> 13 May 2012, 20:15:42 UTC
8aa51d6 openvswitch: checking wrong variable in queue_userspace_packet() "skb" is non-NULL here, for example we dereference it in skb_clone(). The intent was to test "nskb" which was just set. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2012, 19:47:34 UTC
b99215c bonding: Fix LACPDU rx_dropped commit. I applied the wrong version of Jiri's bonding fix in commit 13a8e0c8cdb43982372bd6c65fb26839c8fd8ce9 ("bonding: don't increase rx_dropped after processing LACPDUs") I applied v3, which introduces warnings I asked him to fix, instead of v4 which properly takes care of those issues. This inter-diffs such that the warnings are now gone. Signed-off-by: David S. Miller <davem@davemloft.net> 13 May 2012, 19:45:13 UTC
9ff00d5 Merge tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtd Pull three MTD fixes from David Woodhouse: - Fix a lock ordering deadlock in JFFS2 - Fix an oops in the dataflash driver, triggered by a dummy call to test whether it has OTP functionality. - Fix request_mem_region() failure on amsdelta NAND driver. * tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtd: mtd: ams-delta: fix request_mem_region() failure jffs2: Fix lock acquisition order bug in gc path mtd: fix oops in dataflash driver 13 May 2012, 18:33:09 UTC
36be505 Linux 3.4-rc7 .. and this should hopefully be the last -rc before final 3.4 release. 13 May 2012, 01:37:47 UTC
5889fc3 Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC fixes from Olof Johansson: "I was hoping to be done with fixes for 3.4 but we got two branches from subarch maintainers the last couple of days. So here is one last(?) pull request for arm-soc containing 7 patches: - Five of them are for shmobile dealing with SMP setup and compile failures - The remaining two are for regressions on the Samsung platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper 13 May 2012, 00:27:41 UTC
1bc4a5b Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull a few more GPIO bug fixes from Grant Likely: "Oops, missed a couple. Here's an updated pull req for GPIO" A set of PCH bug fixes, and one patch to fix up compile warnings * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers 13 May 2012, 00:24:29 UTC
85d5c4a Merge branch 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board 12 May 2012, 22:41:22 UTC
28b874a ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 12 May 2012, 23:31:53 UTC
fd717cd ARM: EXYNOS: use s5p-timer for UniversalC210 board Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using ARM private timers") removed support for local timers and forced to use MCT as event source. However MCT is not operating properly on early revision of EXYNOS4 SoCs. All UniversalC210 boards are based on it, so that commit broke support for it. This patch provides a workaround that enables UniversalC210 boards to boot again. s5p-timer is used as an event source, it works only for non-SMP builds. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 12 May 2012, 23:31:52 UTC
d2919c6 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki: "[...] urgent fixes for Renesas ARM-based platforms. Four of these commits are fixes of regressions new in 3.4-rc and the last one is necessary for SMP to work on those systems in general." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper 12 May 2012, 22:40:56 UTC
e994d5e ARM / mach-shmobile: Invalidate caches when booting secondary cores Make sure L1 caches are invalidated when booting secondary cores. Needed to boot all mach-shmobile SMP systems that are using Cortex-A9 including sh73a0, r8a7779 and EMEV2. Thanks to imx and tegra guys for actual code. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 May 2012, 20:13:52 UTC
d672000 ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix Fix SMP TWD boot regression on sh73a0 based platforms caused by: 4200b16 ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on sh73a0 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. This patch removed shmobile_twd_init() which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 May 2012, 20:13:45 UTC
b759bd1 ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix Fix SMP TWD boot regression on r8a7779 based platforms caused by: 4200b16 ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on r8a7779 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 May 2012, 20:13:38 UTC
173e2fe ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd': pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 May 2012, 20:13:01 UTC
2b3e38c ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd': pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 May 2012, 20:12:36 UTC
cf00c55 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor qla and virto fixes plus one major regression fix (oops in all legacy host drivers)." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] virtio_scsi: fix TMF use-after-free [SCSI] fix oops in all legacy host adapters caused by 6f381fa [SCSI] qla2xxx: Update version number to 8.04.00.03-k. [SCSI] qla2xxx: Properly check for current state after the fabric-login request. [SCSI] qla2xxx: Proper completion to scsi-ml for scsi status task_set_full and busy. [SCSI] qla2xxx: Block flash access from application when device is initialized for ISP82xx. [SCSI] qla2xxx: Fix reset time out as qla2xxx not ack to reset request. 12 May 2012, 20:02:31 UTC
4a873f5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David S. Miller: 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the entry is dead before returning it to our caller. 2) openvswitch locking and packet validation fixes from Ansis Atteka, Jesse Gross, and Pravin B Shelar. 3) Fix PM resume locking in IGB driver, from Benjamin Poirier. 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor. 5) Revert a bogus network namespace isolation change that was causing regressions on S390 networking devices. 6) If bonding decides to process and handle a LACPDU frame, we shouldn't bump the rx_dropped counter. From Jiri Bohac. 7) Fix mis-calculation of available TX space in r8169 driver when doing TSO, which can lead to crashes and/or hung device. From Julien Ducourthial. 8) SCTP does not validate cached routes properly in all cases, from Nicolas Dichtel. 9) Link status interrupt needs to be handled in ks8851 driver, from Stephen Boyd. 10) Use capable(), not cap_raised(), in connector/userns netlink code. From Eric W. Biederman via Andrew Morton. 11) Fix pktgen OOPS on module unload, from Eric Dumazet. 12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet. 13) Cure division by zero in SFC driver, from Ben Hutchings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ks8851: Update link status during link change interrupt macvtap: restore vlan header on user read vhost-net: fix handle_rx buffer size bonding: don't increase rx_dropped after processing LACPDUs connector/userns: replace netlink uses of cap_raised() with capable() sctp: check cached dst before using it pktgen: fix crash at module unload Revert "net: maintain namespace isolation between vlan and real device" ehea: fix losing of NEQ events when one event occurred early igb: fix rtnl race in PM resume path ipv4: Do not use dead fib_info entries. r8169: fix unsigned int wraparound with TSO sfc: Fix division by zero when using one RX channel and no SR-IOV openvswitch: Validation of IPv6 set port action uses IPv4 header net: compare_ether_addr[_64bits]() has no ordering cdc_ether: Ignore bogus union descriptor for RNDIS devices bnx2x: bug fix when loading after SAN boot e1000: Silence sparse warnings by correcting type igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed. ... 12 May 2012, 19:57:01 UTC
2eb4296 Merge tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes from Alasdair G Kergon: "Fix a couple of serious memory leaks in device-mapper thin provisioning and tidy its MODULE_DESCRIPTION. Mitigate occasional reported hangs associated with multipath scsi_dh module loading." * tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton 12 May 2012, 19:56:08 UTC
a6c072c MAINTAINERS: Add myself as the cpufreq maintainer Since cpufreq has no official maintainer at the moment, I'm willing to maintain it along some other power management core code I've been maintaining already. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2012, 19:55:22 UTC
510193a dm mpath: check if scsi_dh module already loaded before trying to load If the requested scsi_dh module is already loaded then skip request_module(). Multipath table loads can hang in an unnecessary __request_module. Reported-by: Ben Marzinski <bmarzins@redhat.com> Cc: stable@kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 May 2012, 00:43:21 UTC
7cab8bf dm thin: correct module description Remove duplicate copy of string "device-mapper" (DM_NAME) from MODULE_DESCRIPTION. Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 May 2012, 00:43:19 UTC
c3a0ce2 dm thin: fix unprotected use of prepared_discards list Fix two places in commit 104655fd4dce ("dm thin: support discards") that didn't use pool->lock to protect against concurrent changes to the prepared_discards list. Without this fix, thin_endio() can race with process_discard(), leading to concurrent list_add()s that result in the processes locking up with an error like the following: WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0() ... list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0). ... Pid: 17205, comm: kworker/u:1 Tainted: G W O 3.4.0-rc3.snitm+ #1 Call Trace: [<ffffffff8103ca1f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8103cb16>] warn_slowpath_fmt+0x46/0x50 [<ffffffffa04f6ce6>] ? bio_detain+0xc6/0x210 [dm_thin_pool] [<ffffffff8124ff3f>] __list_add+0x8f/0xa0 [<ffffffffa04f70d2>] process_discard+0x2a2/0x2d0 [dm_thin_pool] [<ffffffffa04f6a78>] ? remap_and_issue+0x38/0x50 [dm_thin_pool] [<ffffffffa04f7c3b>] process_deferred_bios+0x7b/0x230 [dm_thin_pool] [<ffffffffa04f7df0>] ? process_deferred_bios+0x230/0x230 [dm_thin_pool] [<ffffffffa04f7e42>] do_worker+0x52/0x60 [dm_thin_pool] [<ffffffff81056fa9>] process_one_work+0x129/0x450 [<ffffffff81059b9c>] worker_thread+0x17c/0x3c0 [<ffffffff81059a20>] ? manage_workers+0x120/0x120 [<ffffffff8105eabe>] kthread+0x9e/0xb0 [<ffffffff814ceda4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ea20>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff814ceda0>] ? gs_change+0x13/0x13 ---[ end trace 7e0a523bc5e52692 ]--- Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 May 2012, 00:43:16 UTC
03aaae7 dm thin: reinstate missing mempool_free in cell_release_singleton Fix a significant memory leak inadvertently introduced during simplification of cell_release_singleton() in commit 6f94a4c45a6f744383f9f695dde019998db3df55 ("dm thin: fix stacked bi_next usage"). A cell's hlist_del() must be accompanied by a mempool_free(). Use __cell_release() to do this, like before. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 May 2012, 00:43:12 UTC
2760f7a gpio/exynos: Fix compiler warnings when non-exynos machines are selected Fixes the following compiler warnings: drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’: drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable] drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 12 May 2012, 00:25:53 UTC
df9541a gpio: pch9: Use proper flow type handlers Jean-Francois Dagenais reported: Configuring a gpio pin with the gpio-pch driver with "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for threaded ISR until the ISR thread actually gets to physically clear the interrupt on the triggering chip!! The immediate observable symptom is the high CPU usage for my ISR thread task and the interrupt count in /proc/interrupts incrementing radically. The driver is wrong in several ways: 1) Using handle_simple_irq() does not provide proper flow control handling. In the case of oneshot threaded handlers for the demultiplexed interrupts this results in an interrupt storm because the simple handler does not deal with masking/unmasking. Even without threaded oneshot handlers an interrupt storm for level type interrupts can easily be triggered when the interrupt is disabled and the interrupt line is activated from the device. 2) Acknowlegding the demultiplexed interrupt before calling the handler is wrong for level type interrupts. 3) The set_type function unconditionally enables the interrupt. It's supposed to set the type and nothing else. The unmasking is done by the core code. Move the acknowledge code into a separate function and add it to the demux irqchip callbacks. Remove the unconditional enabling from the set_type() callback and set the proper flow handlers depending on the selected type (level/edge). Reported-and-tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 12 May 2012, 00:18:50 UTC
bcc62fb Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull GPIO omap bug fix from Grant Likely. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/omap: fix incorrect initialization of omap_gpio_mod_init 11 May 2012, 23:59:07 UTC
ec53646 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull another powerpc irq fix from Benjamin Herrenschmidt: "It looks like my previous fix for the lazy irq masking problem wasn't quite enough. There was another problem related to performance monitor interrupts acting as NMIs leaving the flags in an incorrect state. Here's a fix that finally seems to make perf solid again." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/irq: Fix another case of lazy IRQ state getting out of sync 11 May 2012, 23:58:14 UTC
04e5335 Merge branch '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fix from Nicholas Bellinger: "This patch removes some incorrect legacy code to free se_lun_acl memory in the NodeACL release path that could potentially trigger an OOPS during shutdown once dynamic -> explicit initiator NodeACL conversion has occurred. That said, we've been able to trigger an OOPS in v4.0 code for this special case when the associated MappedLUNs had not also been made explicit based on active TPG LUN layout during the conversion, so it really makes senses to go ahead and drop this extra cruft to avoid any possible issues here. This ends up only effecting iscsi-target module code (it's the only user) and is CC'ed to stable." * '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion 11 May 2012, 23:49:09 UTC
7c0482e powerpc/irq: Fix another case of lazy IRQ state getting out of sync So we have another case of paca->irq_happened getting out of sync with the HW irq state. This can happen when a perfmon interrupt occurs while soft disabled, as it will return to a soft disabled but hard enabled context while leaving a stale PACA_IRQ_HARD_DIS flag set. This patch fixes it, and also adds a test for the condition of those flags being out of sync in arch_local_irq_restore() when CONFIG_TRACE_IRQFLAGS is enabled. This helps catching those gremlins faster (and so far I can't seem see any anymore, so that's good news). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 May 2012, 23:40:41 UTC
062e55e ks8851: Update link status during link change interrupt If a link change interrupt comes in we just clear the interrupt and continue along without notifying the upper networking layers that the link has changed. Use the mii_check_link() function to update the link status whenever a link change interrupt occurs. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 22:23:34 UTC
f09e224 macvtap: restore vlan header on user read Ethernet vlan header is not on the packet and kept in the skb->vlan_tci when it comes from lower dev. This patch inserts vlan header in user buffer during skb copy on user read. Signed-off-by: Basil Gor <basil.gor@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 22:16:57 UTC
c53cff5 vhost-net: fix handle_rx buffer size Take vlan header length into account, when vlan id is stored as vlan_tci. Otherwise tagged packets coming from macvtap will be truncated. Signed-off-by: Basil Gor <basil.gor@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 22:16:57 UTC
cfebf8f target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion This patch removes some potentially problematic legacy code within core_clear_initiator_node_from_tpg() that was originally intended to release left over se_lun_acl setup during dynamic NodeACL+MappedLUN generate when running with TPG demo-mode operation. Since we now only ever expect to allocate and release se_lun_acl from within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and target_fabric_drop_mappedlun() context respectively, this code for demo-mode release is incorrect and needs to be removed. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 11 May 2012, 21:55:19 UTC
5807c3b ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB Some of the Digital mixer kcontrol max values were off by 1 not allowing a max of 0dB. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org 11 May 2012, 21:48:45 UTC
4e25651 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull a m68knommu fix from Greg Ungerer: "It contains a single fix for including the ColdFire QSPI interface setup code when enabled as a module. This was broken in the consolidation of the ColdFire SoC device tables in the 3.4 merge window." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m 11 May 2012, 16:28:35 UTC
1b76b02 mm: raise MemFree by reverting percpu_pagelist_fraction to 0 Why is there less MemFree than there used to be? It perturbed a test, so I've just been bisecting linux-next, and now find the offender went upstream yesterday. Commit 93278814d359 "mm: fix division by 0 in percpu_pagelist_fraction()" mistakenly initialized percpu_pagelist_fraction to the sysctl's minimum 8, which leaves 1/8th of memory on percpu lists (on each cpu??); but most of us expect it to be left unset at 0 (and it's not then used as a divisor). MemTotal: 8061476kB 8061476kB 8061476kB 8061476kB 8061476kB 8061476kB Repetitive test with percpu_pagelist_fraction 8: MemFree: 6948420kB 6237172kB 6949696kB 6840692kB 6949048kB 6862984kB Same test with percpu_pagelist_fraction back to 0: MemFree: 7945000kB 7944908kB 7948568kB 7949060kB 7948796kB 7948812kB Signed-off-by: Hugh Dickins <hughd@google.com> [ We really should fix the crazy sysctl interface too, but that's a separate thing - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 May 2012, 16:23:39 UTC
eab2158 dmaengine: pl330: dont complete descriptor for cyclic dma the cookie updates completed the cyclic dma descriptor wrongly. This caused the BUG_ON to be hit as submit is called for completed descriptor Fix this by not marking the cyclic descriptor as complete Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> 11 May 2012, 05:54:41 UTC
13a8e0c bonding: don't increase rx_dropped after processing LACPDUs Since commit 3aba891d, bonding processes LACP frames (802.3ad mode) with bond_handle_frame(). Currently a copy of the skb is made and the original is left to be processed by other rx_handlers and the rest of the network stack by returning RX_HANDLER_ANOTHER. As there is no protocol handler for PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped increased. Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED if bonding has processed the LACP frame. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 03:30:01 UTC
38bf195 connector/userns: replace netlink uses of cap_raised() with capable() In 2009 Philip Reiser notied that a few users of netlink connector interface needed a capability check and added the idiom cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise that netlink was asynchronous. In 2011 Patrick McHardy noticed we were being silly because netlink is synchronous and removed eff_cap from the netlink_skb_params and changed the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN). Looking at those spots with a fresh eye we should be calling capable(CAP_SYS_ADMIN). The only reason I can see for not calling capable is that it once appeared we were not in the same task as the caller which would have made calling capable() impossible. In the initial user_namespace the only difference between between cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets PF_SUPERPRIV if we use the capability. Since we are going to be using root privilege setting PF_SUPERPRIV seems the right thing to do. The motivation for this that patch is that in a child user namespace cap_raised(current_cap(),...) tests your capabilities with respect to that child user namespace not capabilities in the initial user namespace and thus will allow processes that should be unprivielged to use the kernel services that are only protected with cap_raised(current_cap(),..). To fix possible user_namespace issues and to just clean up the code replace cap_raised(current_cap(), CAP_SYS_ADMIN) with capable(CAP_SYS_ADMIN). Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 03:21:39 UTC
e026886 sctp: check cached dst before using it dst_check() will take care of SA (and obsolete field), hence IPsec rekeying scenario is taken into account. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yaseivch <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 03:15:47 UTC
c57b546 pktgen: fix crash at module unload commit 7d3d43dab4e9 (net: In unregister_netdevice_notifier unregister the netdevices.) makes pktgen crashing at module unload. [ 296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267 [ 296.820719] lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1 [ 296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254 [ 296.821079] Call Trace: [ 296.821211] [<ffffffff8168a715>] spin_dump+0x8a/0x8f [ 296.821345] [<ffffffff8168a73b>] spin_bug+0x21/0x26 [ 296.821507] [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140 [ 296.821648] [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20 [ 296.821786] [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen] [ 296.821928] [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen] [ 296.822073] [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100 [ 296.822216] [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen] [ 296.822357] [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0 [ 296.822502] [<ffffffff81699652>] system_call_fastpath+0x16/0x1b Hold the pktgen_thread_lock while splicing pktgen_threads, and test pktgen_exiting in pktgen_device_event() to make unload faster. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 03:10:24 UTC
59b9997 Revert "net: maintain namespace isolation between vlan and real device" This reverts commit 8a83a00b0735190384a348156837918271034144. It causes regressions for S390 devices, because it does an unconditional DST drop on SKBs for vlans and the QETH device needs the neighbour entry hung off the DST for certain things on transmit. Arnd can't remember exactly why he even needed this change. Conflicts: drivers/net/macvlan.c net/8021q/vlan_dev.c net/core/dev.c Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 03:03:34 UTC
380ec96 ehea: fix losing of NEQ events when one event occurred early The NEQ interrupt is only triggered when there was no previous pending interrupt. If we request irq handling after an interrupt has occurred, we will never get an interrupt until we call H_RESET_EVENTS. Events seem to be cleared when we first register the NEQ. So, when we requested irq handling right after registering it, a possible race with an interrupt was much less likely. Now, there is a chance we may lose this race and never get any events. The fix here is to poll and acknowledge any events that might have happened right after registering the irq handler. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 02:45:54 UTC
cfb8c3a igb: fix rtnl race in PM resume path Since the caller (PM resume code) is not the one holding rtnl, when taking the 'else' branch rtnl may be released at any moment, thereby defeating the whole purpose of this code block. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 02:44:46 UTC
dccd9ec ipv4: Do not use dead fib_info entries. Due to RCU lookups and RCU based release, fib_info objects can be found during lookup which have fi->fib_dead set. We must ignore these entries, otherwise we risk dereferencing the parts of the entry which are being torn down. Reported-by: Yevgen Pronenko <yevgen.pronenko@sonymobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 May 2012, 02:16:32 UTC
d60b9c1 Merge branch 'parisc' (PA-RISC compile fixes) Merge PA-RISC compile fixes from Rolf Eike Beer: "Since commit d66acc39c7ce ("bitops: Optimise get_order()") getorder.h includes log2.h which leads to an include loop on PA-RISC, bringing a bunch of other breakage to light. This patchset fixes the compilation of the current state of 3.4 on HPPA. Unchanged against the first version, just added an Ack by Grant." * emailed from Rolf Eike Beer <eike-kernel@sf-tec.de>: (5 patches) parisc: move definition of PAGE0 to asm/page.h parisc: add missing include of asm/page.h to asm/pgtable.h parisc: drop include of asm/pdc.h from asm/hardware.h parisc: add missing forward declarations in asm/hardware.h parisc: add missing includes in asm/spinlock.h 10 May 2012, 22:18:41 UTC
7c28332 Merge branch 'akpm' (Andrew's patch-bomb) Merge misc fixes from Andrew Morton. * emailed from Andrew Morton <akpm@linux-foundation.org>: (8 patches) MAINTAINERS: add maintainer for LED subsystem mm: nobootmem: fix sign extend problem in __free_pages_memory() drivers/leds: correct __devexit annotations memcg: free spare array to avoid memory leak namespaces, pid_ns: fix leakage on fork() failure hugetlb: prevent BUG_ON in hugetlb_fault() -> hugetlb_cow() mm: fix division by 0 in percpu_pagelist_fraction() proc/pid/pagemap: correctly report non-present ptes and holes between vmas 10 May 2012, 22:17:24 UTC
4a8a078 parisc: move definition of PAGE0 to asm/page.h This was defined in asm/pdc.h which needs to include asm/page.h for __PAGE_OFFSET. This leads to an include loop so that page.h eventually will include pdc.h again. While this is no problem because of header guards, it is a problem because some symbols may be undefined. Such an error is this: In file included from include/linux/bitops.h:35:0, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/processor.h:16, from arch/parisc/include/asm/spinlock.h:6, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from include/linux/sysfs.h:20, from include/linux/kobject.h:21, from include/linux/device.h:17, from include/linux/eisa.h:5, from arch/parisc/kernel/pci.c:11: arch/parisc/include/asm/bitops.h: In function ‘set_bit’: arch/parisc/include/asm/bitops.h:82:2: error: implicit declaration of function ‘_atomic_spin_lock_irqsave’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/bitops.h:84:2: error: implicit declaration of function ‘_atomic_spin_unlock_irqrestore’ [-Werror=implicit-function-declaration] Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 May 2012, 22:12:08 UTC
back to top