Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 11:00:25 UTC
sort by:
Revision Author Date Message Commit Date
cbb4969 Eric Dumazet 21 December 2018, 15:47:51 UTC ipv6: tunnels: fix two use-after-free xfrm6_policy_check() might have re-allocated skb->head, we need to reload ipv6 header pointer. sysbot reported : BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40 Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304 CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40 ipv6_addr_type include/net/ipv6.h:403 [inline] ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727 ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757 vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443 IPVS: ftp: loaded support on port[0] = 21 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083 process_backlog+0x24e/0x7a0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412 __do_softirq+0x308/0xb7e kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 </IRQ> do_softirq.part.14+0x126/0x160 kernel/softirq.c:337 do_softirq+0x19/0x20 kernel/softirq.c:340 netif_rx_ni+0x521/0x860 net/core/dev.c:4569 dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84 ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727 ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176 ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727 ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747 rawv6_push_pending_frames net/ipv6/raw.c:615 [inline] rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945 kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>' kobject: 'queues' (0000000089e6eea2): kobject_uevent_env inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop! sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 sock_write_iter+0x35e/0x5c0 net/socket.c:900 call_write_iter include/linux/fs.h:1857 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues' kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0' __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues' entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457669 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669 RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003 kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4 R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff Allocated by task 1304: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc_node mm/slab.c:3684 [inline] __kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698 __kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140 __alloc_skb+0x155/0x760 net/core/skbuff.c:208 kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0' alloc_skb include/linux/skbuff.h:1011 [inline] __ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450 ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619 rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2116 __sys_sendmsg+0x11d/0x280 net/socket.c:2154 __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg net/socket.c:2161 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices' Freed by task 1304: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 skb_free_head+0x93/0xb0 net/core/skbuff.c:553 pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498 __pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896 pskb_may_pull include/linux/skbuff.h:2188 [inline] _decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272 kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env __xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322 __xfrm_policy_check2 include/net/xfrm.h:1170 [inline] xfrm_policy_check include/net/xfrm.h:1175 [inline] xfrm6_policy_check include/net/xfrm.h:1185 [inline] vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083 process_backlog+0x24e/0x7a0 net/core/dev.c:5923 kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0' napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412 __do_softirq+0x308/0xb7e kernel/softirq.c:292 The buggy address belongs to the object at ffff888191b8cac0 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 176 bytes inside of 512-byte region [ffff888191b8cac0, ffff888191b8ccc0) The buggy address belongs to the page: page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940 raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>' Memory state around the buggy address: ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 17:18:31 UTC
5c1e7e9 Vakul Garg 21 December 2018, 15:55:46 UTC Prevent overflow of sk_msg in sk_msg_clone() Fixed function sk_msg_clone() to prevent overflow of 'dst' while adding pages in scatterlist entries. The overflow of 'dst' causes crash in kernel tls module while doing record encryption. Crash fixed by this patch. [ 78.796119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 78.804900] Mem abort info: [ 78.807683] ESR = 0x96000004 [ 78.810744] Exception class = DABT (current EL), IL = 32 bits [ 78.816677] SET = 0, FnV = 0 [ 78.819727] EA = 0, S1PTW = 0 [ 78.822873] Data abort info: [ 78.825759] ISV = 0, ISS = 0x00000004 [ 78.829600] CM = 0, WnR = 0 [ 78.832576] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000bf8ee311 [ 78.839195] [0000000000000008] pgd=0000000000000000 [ 78.844081] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 78.849642] Modules linked in: tls xt_conntrack ipt_REJECT nf_reject_ipv4 ip6table_filter ip6_tables xt_CHECKSUM cpve cpufreq_conservative lm90 ina2xx crct10dif_ce [ 78.865377] CPU: 0 PID: 6007 Comm: openssl Not tainted 4.20.0-rc6-01647-g754d5da63145-dirty #107 [ 78.874149] Hardware name: LS1043A RDB Board (DT) [ 78.878844] pstate: 60000005 (nZCv daif -PAN -UAO) [ 78.883632] pc : scatterwalk_copychunks+0x164/0x1c8 [ 78.888500] lr : scatterwalk_copychunks+0x160/0x1c8 [ 78.893366] sp : ffff00001d04b600 [ 78.896668] x29: ffff00001d04b600 x28: ffff80006814c680 [ 78.901970] x27: 0000000000000000 x26: ffff80006c8de786 [ 78.907272] x25: ffff00001d04b760 x24: 000000000000001a [ 78.912573] x23: 0000000000000006 x22: ffff80006814e440 [ 78.917874] x21: 0000000000000100 x20: 0000000000000000 [ 78.923175] x19: 000081ffffffffff x18: 0000000000000400 [ 78.928476] x17: 0000000000000008 x16: 0000000000000000 [ 78.933778] x15: 0000000000000100 x14: 0000000000000001 [ 78.939079] x13: 0000000000001080 x12: 0000000000000020 [ 78.944381] x11: 0000000000001080 x10: 00000000ffff0002 [ 78.949683] x9 : ffff80006814c248 x8 : 00000000ffff0000 [ 78.954985] x7 : ffff80006814c318 x6 : ffff80006c8de786 [ 78.960286] x5 : 0000000000000f80 x4 : ffff80006c8de000 [ 78.965588] x3 : 0000000000000000 x2 : 0000000000001086 [ 78.970889] x1 : ffff7e0001b74e02 x0 : 0000000000000000 [ 78.976192] Process openssl (pid: 6007, stack limit = 0x00000000291367f9) [ 78.982968] Call trace: [ 78.985406] scatterwalk_copychunks+0x164/0x1c8 [ 78.989927] skcipher_walk_next+0x28c/0x448 [ 78.994099] skcipher_walk_done+0xfc/0x258 [ 78.998187] gcm_encrypt+0x434/0x4c0 [ 79.001758] tls_push_record+0x354/0xa58 [tls] [ 79.006194] bpf_exec_tx_verdict+0x1e4/0x3e8 [tls] [ 79.010978] tls_sw_sendmsg+0x650/0x780 [tls] [ 79.015326] inet_sendmsg+0x2c/0xf8 [ 79.018806] sock_sendmsg+0x18/0x30 [ 79.022284] __sys_sendto+0x104/0x138 [ 79.025935] __arm64_sys_sendto+0x24/0x30 [ 79.029936] el0_svc_common+0x60/0xe8 [ 79.033588] el0_svc_handler+0x2c/0x80 [ 79.037327] el0_svc+0x8/0xc [ 79.040200] Code: 6b01005f 54fff788 940169b1 f9000320 (b9400801) [ 79.046283] ---[ end trace 74db007d069c1cf7 ]--- Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 17:12:49 UTC
99137b7 Willem de Bruijn 21 December 2018, 17:06:59 UTC packet: validate address length Packet sockets with SOCK_DGRAM may pass an address for use in dev_hard_header. Ensure that it is of sufficient length. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 17:11:25 UTC
d134e48 Kangjie Lu 21 December 2018, 06:22:32 UTC net: netxen: fix a missing check and an uninitialized use When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used. The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 17:01:47 UTC
f0c928d Eric Dumazet 20 December 2018, 23:28:56 UTC tcp: fix a race in inet_diag_dump_icsk() Alexei reported use after frees in inet_diag_dump_icsk() [1] Because we use refcount_set() when various sockets are setup and inserted into ehash, we also need to make sure inet_diag_dump_icsk() wont race with the refcount_set() operations. Jonathan Lemon sent a patch changing net_twsk_hashdance() but other spots would need risky changes. Instead, fix inet_diag_dump_icsk() as this bug came with linux-4.10 only. [1] Quoting Alexei : First something iterating over sockets finds already freed tw socket: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30 RIP: 0010:refcount_inc+0x26/0x30 RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282 RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8 RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328 FS: 00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag] // sock_hold(sk); in net/ipv4/inet_diag.c:1002 ? kmalloc_large_node+0x37/0x70 ? __kmalloc_node_track_caller+0x1cb/0x260 ? __alloc_skb+0x72/0x1b0 ? __kmalloc_reserve.isra.40+0x2e/0x80 __inet_diag_dump+0x3b/0x80 [inet_diag] netlink_dump+0x116/0x2a0 netlink_recvmsg+0x205/0x3c0 sock_read_iter+0x89/0xd0 __vfs_read+0xf7/0x140 vfs_read+0x8a/0x140 SyS_read+0x3f/0xa0 do_syscall_64+0x5a/0x100 then a minute later twsk timer fires and hits two bad refcnts for this freed socket: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40 Modules linked in: RIP: 0010:refcount_dec+0x2e/0x40 RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296 RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3 R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80 R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_twsk_kill+0x9d/0xc0 // inet_twsk_bind_unhash(tw, hashinfo); call_timer_fn+0x29/0x110 run_timer_softirq+0x36b/0x3a0 refcount_t: underflow; use-after-free. WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50 RIP: 0010:refcount_sub_and_test+0x46/0x50 RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296 RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358 R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_twsk_put+0x12/0x20 // inet_twsk_put(tw); call_timer_fn+0x29/0x110 run_timer_softirq+0x36b/0x3a0 Fixes: 67db3e4bfbc9 ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <ast@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 03:23:22 UTC
de985ec Ganesh Goudar 20 December 2018, 13:26:09 UTC MAINTAINERS: update cxgb4 and cxgb3 maintainer Arjun Vynipadath will be taking over as maintainer from now. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 00:35:38 UTC
d15f5ac Herbert Xu 20 December 2018, 13:20:10 UTC ipv6: frags: Fix bogus skb->sk in reassembled packets It was reported that IPsec would crash when it encounters an IPv6 reassembled packet because skb->sk is non-zero and not a valid pointer. This is because skb->sk is now a union with ip_defrag_offset. This patch fixes this by resetting skb->sk when exiting from the reassembly code. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 219badfaade9 ("ipv6: frags: get rid of ip6frag_skb_cb/...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 00:31:36 UTC
8fd1a4a Allan W. Nielsen 20 December 2018, 08:37:17 UTC mscc: Configured MAC entries should be locked. The MAC table in Ocelot supports auto aging (normal) and static entries. MAC entries that is manually configured should be static and not subject to aging. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Allan Nielsen <allan.nielsen@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2018, 00:22:45 UTC
1d51b4b Linus Torvalds 20 December 2018, 15:35:16 UTC Merge tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Fix memblock-related crashes" * tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix memblock-related crashes 20 December 2018, 15:35:16 UTC
c0f3ece Linus Torvalds 20 December 2018, 15:33:09 UTC Merge tag 'kbuild-fixes-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fix from Masahiro Yamada: "Fix false positive warning/error about missing library for objtool" * tag 'kbuild-fixes-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix false positive warning/error about missing libelf 20 December 2018, 15:33:09 UTC
122b7e3 Linus Torvalds 20 December 2018, 15:30:37 UTC Merge tag 'char-misc-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are three tiny last-minute driver fixes for 4.20-rc8 that resolve some reported issues, and one MAINTAINERS file update. All of them are related to the hyper-v subsystem, it seems people are actually testing and using it now, which is nice to see :) The fixes are: - uio_hv_generic: fix for opening multiple times - Remove PCI dependancy on hyperv drivers - return proper error code for an unopened channel. And Sasha has signed up to help out with the hyperv maintainership. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels x86, hyperv: remove PCI dependency MAINTAINERS: Patch monkey for the Hyper-V code uio_hv_generic: set callbacks on open 20 December 2018, 15:30:37 UTC
bfd7bd5 Linus Torvalds 20 December 2018, 15:29:11 UTC Merge tag 'tty-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fix from Greg KH: "Here is a single fix, a revert, for the 8250 serial driver to resolve a reported problem. There was some attempted patches to fix the issue, but people are arguing about them, so reverting the patch to revert back to the 4.19 and older behavior is the best thing to do at this late in the release cycle. The revert has been in linux-next with no reported issues" * tag 'tty-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again" 20 December 2018, 15:29:11 UTC
177c459 Linus Torvalds 20 December 2018, 15:27:39 UTC Merge tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes and ids from Greg KH: "Here are some late xhci fixes for 4.20-rc8 as well as a few new device ids for the option usb-serial driver. The xhci fixes resolve some many-reported issues and all of these have been in linux-next for a while with no reported problems" * tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only USB: serial: option: add Telit LN940 series USB: serial: option: add Fibocom NL668 series USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode) USB: serial: option: add GosunCn ZTE WeLink ME3630 USB: serial: option: add HP lt4132 20 December 2018, 15:27:39 UTC
d31aeb7 Linus Torvalds 20 December 2018, 15:25:31 UTC Merge tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Restore code to allow BKOPS and CACHE ctrl even if no HPI support - Reset HPI enabled state during re-init - Use a default minimum timeout when enabling CACHE ctrl MMC host: - omap_hsmmc: Fix DMA API warning - sdhci-tegra: Fix dt parsing of SDMMC pads autocal values - Correct register accesses when enabling v4 mode" * tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support mmc: core: Reset HPI enabled state during re-init and in case of errors mmc: omap_hsmmc: fix DMA API warning mmc: tegra: Fix for SDMMC pads autocal parsing from dt mmc: sdhci: Fix sdhci_do_enable_v4_mode 20 December 2018, 15:25:31 UTC
a837eca Dave Chinner 20 December 2018, 12:23:24 UTC iomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()" This reverts commit 61c6de667263184125d5ca75e894fcad632b0dd3. The reverted commit added page reference counting to iomap page structures that are used to track block size < page size state. This was supposed to align the code with page migration page accounting assumptions, but what it has done instead is break XFS filesystems. Every fstests run I've done on sub-page block size XFS filesystems has since picking up this commit 2 days ago has failed with bad page state errors such as: # ./run_check.sh "-m rmapbt=1,reflink=1 -i sparse=1 -b size=1k" "generic/038" .... SECTION -- xfs FSTYP -- xfs (debug) PLATFORM -- Linux/x86_64 test1 4.20.0-rc6-dgc+ MKFS_OPTIONS -- -f -m rmapbt=1,reflink=1 -i sparse=1 -b size=1k /dev/sdc MOUNT_OPTIONS -- /dev/sdc /mnt/scratch generic/038 454s ... run fstests generic/038 at 2018-12-20 18:43:05 XFS (sdc): Unmounting Filesystem XFS (sdc): Mounting V5 Filesystem XFS (sdc): Ending clean mount BUG: Bad page state in process kswapd0 pfn:3a7fa page:ffffea0000ccbeb0 count:0 mapcount:0 mapping:ffff88800d9b6360 index:0x1 flags: 0xfffffc0000000() raw: 000fffffc0000000 dead000000000100 dead000000000200 ffff88800d9b6360 raw: 0000000000000001 0000000000000000 00000000ffffffff page dumped because: non-NULL mapping CPU: 0 PID: 676 Comm: kswapd0 Not tainted 4.20.0-rc6-dgc+ #915 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 Call Trace: dump_stack+0x67/0x90 bad_page.cold.116+0x8a/0xbd free_pcppages_bulk+0x4bf/0x6a0 free_unref_page_list+0x10f/0x1f0 shrink_page_list+0x49d/0xf50 shrink_inactive_list+0x19d/0x3b0 shrink_node_memcg.constprop.77+0x398/0x690 ? shrink_slab.constprop.81+0x278/0x3f0 shrink_node+0x7a/0x2f0 kswapd+0x34b/0x6d0 ? node_reclaim+0x240/0x240 kthread+0x11f/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x24/0x30 Disabling lock debugging due to kernel taint .... The failures are from anyway that frees pages and empties the per-cpu page magazines, so it's not a predictable failure or an easy to debug failure. generic/038 is a reliable reproducer of this problem - it has a 9 in 10 failure rate on one of my test machines. Failure on other machines have been at random points in fstests runs but every run has ended up tripping this problem. Hence generic/038 was used to bisect the failure because it was the most reliable failure. It is too close to the 4.20 release (not to mention holidays) to try to diagnose, fix and test the underlying cause of the problem, so reverting the commit is the only option we have right now. The revert has been tested against a current tot 4.20-rc7+ kernel across multiple machines running sub-page block size XFs filesystems and none of the bad page state failures have been seen. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Piotr Jaroszynski <pjaroszynski@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Brian Foster <bfoster@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 December 2018, 15:22:51 UTC
519be69 Linus Torvalds 20 December 2018, 07:34:33 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander Aring. 2) nf_tables RCU usage fix from Taehee Yoo. 3) Flow dissector needs nhoff and thoff clamping, from Stanislav Fomichev. 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long. 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva. 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit. 7) Fix SKB leak in rtlwifi, from Larry Finger. 8) Fix state pruning in bpf verifier, from Jakub Kicinski. 9) Don't handle completely duplicate fragments as overlapping, from Michal Kubecek. 10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula. 11) Fix TCP fallback socket release in smc, from Myungho Jung. 12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits) rds: Fix warning. neighbor: NTF_PROXY is a valid ndm_flag for a dump request net: mvpp2: fix the phylink mode validation net/sched: cls_flower: Remove old entries from rhashtable net/tls: allocate tls context using GFP_ATOMIC iptunnel: make TUNNEL_FLAGS available in uapi gro_cell: add napi_disable in gro_cells_destroy lan743x: Remove MAC Reset from initialization net/mlx5e: Remove the false indication of software timestamping support net/mlx5: Typo fix in del_sw_hw_rule net/mlx5e: RX, Fix wrong early return in receive queue poll ipv6: explicitly initialize udp6_addr in udp_sock_create6() bnxt_en: Fix ethtool self-test loopback. net/rds: remove user triggered WARN_ON in rds_sendmsg net/rds: fix warn in rds_message_alloc_sgs ath10k: skip sending quiet mode cmd for WCN3990 mac80211: free skb fraglist before freeing the skb nl80211: fix memory leak if validate_pae_over_nl80211() fails net/smc: fix TCP fallback socket release vxge: ensure data0 is initialized in when fetching firmware version information ... 20 December 2018, 07:34:33 UTC
d84e7bc David S. Miller 20 December 2018, 04:53:18 UTC rds: Fix warning. >> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 December 2018, 04:53:18 UTC
ab63e72 Linus Torvalds 20 December 2018, 02:40:48 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fix from Michael Tsirkin: "A last-minute fix for a test build" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: fix test build after uio.h change 20 December 2018, 02:40:48 UTC
8c9dff1 Linus Torvalds 20 December 2018, 02:38:54 UTC Merge tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: - Fix TCP socket disconnection races by ensuring we always call xprt_disconnect_done() after releasing the socket. - Fix a race when clearing both XPRT_CONNECTING and XPRT_LOCKED - Remove xprt_connect_status() so it does not mask errors that should be handled by call_connect_status() * tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove xprt_connect_status() SUNRPC: Fix a race with XPRT_CONNECTING SUNRPC: Fix disconnection races 20 December 2018, 02:38:54 UTC
fe11279 Linus Torvalds 20 December 2018, 02:27:58 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: - One nasty use-after-free bugfix, from this merge window however - A less nasty use-after-free that can only zero some words at the beginning of the page, and hence is not really exploitable - A NULL pointer dereference - A dummy implementation of an AMD chicken bit MSR that Windows uses for some unknown reason * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs KVM: X86: Fix NULL deref in vcpu_scan_ioapic KVM: Fix UAF in nested posted interrupt processing KVM: fix unregistering coalesced mmio zone from wrong bus 20 December 2018, 02:27:58 UTC
2dd516f Linus Torvalds 20 December 2018, 02:16:17 UTC Merge tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in dma-direct that didn't take account the magic AMD memory encryption mask in the DMA address" * tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: do not include SME mask in the DMA supported check 20 December 2018, 02:16:17 UTC
c0fde87 David Ahern 20 December 2018, 00:54:38 UTC neighbor: NTF_PROXY is a valid ndm_flag for a dump request When dumping proxy entries the dump request has NTF_PROXY set in ndm_flags. strict mode checking needs to be updated to allow this flag. Fixes: 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 December 2018, 01:30:47 UTC
1b451fb Antoine Tenart 19 December 2018, 17:00:12 UTC net: mvpp2: fix the phylink mode validation The mvpp2_phylink_validate() sets all modes that are supported by a given PPv2 port. An mistake made the 10000baseT_Full mode being advertised in some cases when a port wasn't configured to perform at 10G. This patch fixes this. Fixes: d97c9f4ab000 ("net: mvpp2: 1000baseX support") Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 December 2018, 00:38:35 UTC
599d257 Roi Dayan 19 December 2018, 16:07:56 UTC net/sched: cls_flower: Remove old entries from rhashtable When replacing a rule we add the new rule to the rhashtable but only remove the old if not in skip_sw. This commit fix this and remove the old rule anyway. Fixes: 35cc3cefc4de ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 December 2018, 00:36:55 UTC
c6ec179 Ganesh Goudar 19 December 2018, 11:48:22 UTC net/tls: allocate tls context using GFP_ATOMIC create_ctx can be called from atomic context, hence use GFP_ATOMIC instead of GFP_KERNEL. [ 395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl [ 395.996564] 2 locks held by openssl/16254: [ 396.010492] #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0 [ 396.029838] #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280 [ 396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G O 4.20.0-rc6+ #25 [ 396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017 [ 396.083537] Call Trace: [ 396.096265] dump_stack+0x5e/0x8b [ 396.109876] ___might_sleep+0x216/0x250 [ 396.123940] kmem_cache_alloc_trace+0x1b0/0x240 [ 396.138800] create_ctx+0x1f/0x60 [ 396.152504] tls_init+0xbd/0x280 [ 396.166135] tcp_set_ulp+0x191/0x2d0 [ 396.180035] ? tcp_set_ulp+0x2c/0x2d0 [ 396.193960] do_tcp_setsockopt.isra.44+0x148/0x9a0 [ 396.209013] __sys_setsockopt+0x7c/0xe0 [ 396.223054] __x64_sys_setsockopt+0x20/0x30 [ 396.237378] do_syscall_64+0x4a/0x180 [ 396.251200] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: df9d4a178022 ("net/tls: sleeping function from invalid context") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 December 2018, 00:28:50 UTC
1875a9a wenxu 19 December 2018, 06:11:15 UTC iptunnel: make TUNNEL_FLAGS available in uapi ip l add dev tun type gretap external ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap For gretap Key example when the command set the id but don't set the TUNNEL_KEY flags. There is no key field in the send packet In the lwtunnel situation, some TUNNEL_FLAGS should can be set by userspace Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 23:58:01 UTC
8e1da73 Lorenzo Bianconi 19 December 2018, 22:23:00 UTC gro_cell: add napi_disable in gro_cells_destroy Add napi_disable routine in gro_cells_destroy since starting from commit c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") gro_cell_poll and gro_cells_destroy can run concurrently on napi_skbs list producing a kernel Oops if the tunnel interface is removed while gro_cell_poll is running. The following Oops has been triggered removing a vxlan device while the interface is receiving traffic [ 5628.948853] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 5628.949981] PGD 0 P4D 0 [ 5628.950308] Oops: 0002 [#1] SMP PTI [ 5628.950748] CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.20.0-rc6+ #41 [ 5628.952940] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.955615] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.956250] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.957102] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.957940] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.958803] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.959661] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.960682] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.961616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.962359] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.963188] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.964034] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.964871] Call Trace: [ 5628.965179] net_rx_action+0xf0/0x380 [ 5628.965637] __do_softirq+0xc7/0x431 [ 5628.966510] run_ksoftirqd+0x24/0x30 [ 5628.966957] smpboot_thread_fn+0xc5/0x160 [ 5628.967436] kthread+0x113/0x130 [ 5628.968283] ret_from_fork+0x3a/0x50 [ 5628.968721] Modules linked in: [ 5628.969099] CR2: 0000000000000008 [ 5628.969510] ---[ end trace 9d9dedc7181661fe ]--- [ 5628.970073] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.972965] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.973611] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.974504] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.975462] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.976413] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.977375] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.978296] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.979327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.980044] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.980929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.981736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.982409] Kernel panic - not syncing: Fatal exception in interrupt [ 5628.983307] Kernel Offset: disabled Fixes: c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 23:50:02 UTC
e0e5878 Bryan Whitehead 19 December 2018, 21:55:15 UTC lan743x: Remove MAC Reset from initialization The MAC Reset was noticed to erase important EEPROM settings. It is also unnecessary since a chip wide reset was done earlier in initialization, and that reset preserves EEPROM settings. There for this patch removes the unnecessary MAC specific reset. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 23:48:11 UTC
c5c08be Michael S. Tsirkin 19 December 2018, 23:21:51 UTC virtio: fix test build after uio.h change Fixes: d38499530e5 ("fs: decouple READ and WRITE from the block layer ops") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 19 December 2018, 23:23:49 UTC
d9842f3 David S. Miller 19 December 2018, 21:44:12 UTC Merge tag 'mlx5-fixes-2018-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2018-12-19 Some fixes for the mlx5 driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 21:44:12 UTC
4765420 Alaa Hleihel 25 November 2018, 09:46:09 UTC net/mlx5e: Remove the false indication of software timestamping support mlx5 driver falsely advertises support of software timestamping. Fix it by removing the false indication. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 December 2018, 21:31:16 UTC
f033788 Yuval Avnery 13 December 2018, 00:26:46 UTC net/mlx5: Typo fix in del_sw_hw_rule Expression terminated with "," instead of ";", resulted in set_fte getting bad value for modify_enable_mask field. Fixes: bd5251dbf156 ("net/mlx5_core: Introduce flow steering destination of type counter") Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 December 2018, 21:31:16 UTC
bfc6982 Tariq Toukan 02 December 2018, 13:45:53 UTC net/mlx5e: RX, Fix wrong early return in receive queue poll When the completion queue of the RQ is empty, do not immediately return. If left-over decompressed CQEs (from the previous cycle) were processed, need to go to the finalization part of the poll function. Bug exists only when CQE compression is turned ON. This solves the following issue: mlx5_core 0000:82:00.1: mlx5_eq_int:544:(pid 0): CQ error on CQN 0xc08, syndrome 0x1 mlx5_core 0000:82:00.1 p4p2: mlx5e_cq_error_event: cqn=0x000c08 event=0x04 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 December 2018, 21:31:16 UTC
fb24274 Cong Wang 19 December 2018, 05:17:44 UTC ipv6: explicitly initialize udp6_addr in udp_sock_create6() syzbot reported the use of uninitialized udp6_addr::sin6_scope_id. We can just set ::sin6_scope_id to zero, as tunnels are unlikely to use an IPv6 address that needs a scope id and there is no interface to bind in this context. For net-next, it looks different as we have cfg->bind_ifindex there so we can probably call ipv6_iface_scope_id(). Same for ::sin6_flowinfo, tunnels don't use it. Fixes: 8024e02879dd ("udp: Add udp_sock_create for UDP tunnels to open listener socket") Reported-by: syzbot+c56449ed3652e6720f30@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 20:09:00 UTC
84404d5 Michael Chan 19 December 2018, 18:46:50 UTC bnxt_en: Fix ethtool self-test loopback. The current code has 2 problems. It assumes that the RX ring for the loopback packet is combined with the TX ring. This is not true if the ethtool channels are set to non-combined mode. The second problem is that it won't work on 57500 chips without adjusting the logic to get the proper completion ring (cpr) pointer. Fix both issues by locating the proper cpr pointer through the RX ring. Fixes: e44758b78ae8 ("bnxt_en: Use bnxt_cp_ring_info struct pointer as parameter for RX path.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 19:31:09 UTC
912cb1d David S. Miller 19 December 2018, 18:27:58 UTC Merge branch 'rds-fixes' Shamir Rabinovitch says: ==================== WARNING in rds_message_alloc_sgs This patch set fix google syzbot rds bug found in linux-next. The first patch solve the syzbot issue. The second patch fix issue mentioned by Leon Romanovsky that drivers should not call WARN_ON as result from user input. syzbot bug report can be foud here: https://lkml.org/lkml/2018/10/31/28 v1->v2: - patch 1: make rds_iov_vector fields name more descriptive (Hakon) - patch 1: fix potential mem leak in rds_rm_size if krealloc fail (Hakon) v2->v3: - patch 2: harden rds_sendmsg for invalid number of sgs (Gerd) v3->v4 - Santosh a.b. on both patches + repost to net-dev ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 18:27:58 UTC
c75ab8a shamir rabinovitch 16 December 2018, 07:01:09 UTC net/rds: remove user triggered WARN_ON in rds_sendmsg per comment from Leon in rdma mailing list https://lkml.org/lkml/2018/10/31/312 : Please don't forget to remove user triggered WARN_ON. https://lwn.net/Articles/769365/ "Greg Kroah-Hartman raised the problem of core kernel API code that will use WARN_ON_ONCE() to complain about bad usage; that will not generate the desired result if WARN_ON_ONCE() is configured to crash the machine. He was told that the code should just call pr_warn() instead, and that the called function should return an error in such situations. It was generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be triggered from user space need to be fixed." in addition harden rds_sendmsg to detect and overcome issues with invalid sg count and fail the sendmsg. Suggested-by: Leon Romanovsky <leon@kernel.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 18:27:58 UTC
ea01007 shamir rabinovitch 16 December 2018, 07:01:08 UTC net/rds: fix warn in rds_message_alloc_sgs redundant copy_from_user in rds_sendmsg system call expose rds to issue where rds_rdma_extra_size walk the rds iovec and and calculate the number pf pages (sgs) it need to add to the tail of rds message and later rds_cmsg_rdma_args copy the rds iovec again and re calculate the same number and get different result causing WARN_ON in rds_message_alloc_sgs. fix this by doing the copy_from_user only once per rds_sendmsg system call. When issue occur the below dump is seen: WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 panic+0x2ad/0x55c kernel/panic.c:188 __warn.cold.8+0x20/0x45 kernel/panic.c:540 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293 RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6 RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004 RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67 R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000 R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623 rds_cmsg_send net/rds/send.c:971 [inline] rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117 __sys_sendmsg+0x11d/0x280 net/socket.c:2155 __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x44a859 Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859 RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003 RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c Kernel Offset: disabled Rebooting in 86400 seconds.. Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 18:27:58 UTC
c6f4075 David S. Miller 19 December 2018, 16:39:18 UTC Merge tag 'wireless-drivers-for-davem-2018-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.20 Last set of fixes for 4.20. All (except the mt76 fix) of these are important fixes to user reported problems and pretty small in size. rtlwifi * fix skb leak mwifiex * revert a commit from v4.19 due to problems with locking mt76 * fix a potential NULL derenfence * add entry to MAINTAINERS iwlwifi * fix a firmware crash which was a regression introduced in v4.20-rc4 ath10k * fix a firmware crash with wcn3990 firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 16:39:18 UTC
49ce708 David S. Miller 19 December 2018, 16:34:46 UTC Merge tag 'mac80211-for-davem-2018-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three fixes: * fix a memory leak in an error path * fix TXQs in interface teardown * free fraglist if we used it internally before returning SKB ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 16:34:46 UTC
bed1369 Geert Uytterhoeven 03 December 2018, 11:53:51 UTC m68k: Fix memblock-related crashes When running the kernel in Fast RAM on Atari: Ignoring memory chunk at 0x0:0xe00000 before the first chunk ... Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<0069dbac>] free_all_bootmem+0x12c/0x186 SR: 2714 SP: (ptrval) a2: 005e3314 d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000 d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000 Process swapper (pid: 0, task=(ptrval)) Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000736 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 005e1f84: 00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000 0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000 00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000 00000000 00000000 00000000 00000000 006b5006 00000000 00690872 Call Trace: [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4 [<00693cd8>] mem_init+0xa/0x5c [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<00691be6>] start_kernel+0x1ca/0x462 [<00690872>] _sinittext+0x872/0x11f8 Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! As the kernel must run in the memory chunk with the lowest address, ST-RAM is ignored, and removed from the m68k_memory[] array. However, it is not removed from memblock, causing a crash later. More investigation shows that there are 3 places where memory chunks are ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(), and thus causing crashes: 1. On classic m68k CPUs with a MMU, paging_init() ignores all memory chunks below the first chunk, cfr. above, 2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all Zorro II memory, 3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all but the first memory chunk. Fix this by moving the calls to memblock_add() from m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks have been removed from m68k_memory[]. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> 19 December 2018, 16:24:12 UTC
ef7cfd0 Masahiro Yamada 18 December 2018, 05:25:41 UTC kbuild: fix false positive warning/error about missing libelf For the same reason as commit 25896d073d8a ("x86/build: Fix compiler support check for CONFIG_RETPOLINE"), you cannot put this $(error ...) into the parse stage of the top Makefile. Perhaps I'd propose a more sophisticated solution later, but this is the best I can do for now. Link: https://lkml.org/lkml/2017/12/25/211 Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reported-by: Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Qian Cai <cai@lca.pw> 19 December 2018, 15:04:15 UTC
5388457 Rakesh Pillai 14 December 2018, 10:17:46 UTC ath10k: skip sending quiet mode cmd for WCN3990 HL2.0 firmware does not support setting quiet mode. If the host driver sends the quiet mode setting command to the HL2.0 firmware, it crashes with the below signature. fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN RT:207a:PC=b001b4f0 The quiet mode command support is exposed by the firmware via thermal throttle wmi service. Enable ath10k thermal support if thermal throttle wmi service bit is set. 10.x firmware versions support this feature by default, but unfortunately do not advertise the support via service flags, hence have to manually set the service flag in ath10k_core_compat_services(). Tested on QCA988X with 10.2.4.70.9-2. Also tested on WCN3990. Co-developed-by: Govind Singh <govinds@codeaurora.org> Co-developed-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 19 December 2018, 13:37:01 UTC
34b1e0e Sara Sharon 15 December 2018, 09:03:06 UTC mac80211: free skb fraglist before freeing the skb mac80211 uses the frag list to build AMSDU. When freeing the skb, it may not be really freed, since someone is still holding a reference to it. In that case, when TCP skb is being retransmitted, the pointer to the frag list is being reused, while the data in there is no longer valid. Since we will never get frag list from the network stack, as mac80211 doesn't advertise the capability, we can safely free and nullify it before releasing the SKB. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 19 December 2018, 08:40:17 UTC
d350a0f Johannes Berg 15 December 2018, 09:03:22 UTC nl80211: fix memory leak if validate_pae_over_nl80211() fails If validate_pae_over_nl80211() were to fail in nl80211_crypto_settings(), we might leak the 'connkeys' allocation. Fix this. Fixes: 64bf3d4bc2b0 ("nl80211: Add CONTROL_PORT_OVER_NL80211 attribute") Signed-off-by: Johannes Berg <johannes.berg@intel.com> 19 December 2018, 08:40:17 UTC
3061169 David S. Miller 19 December 2018, 06:30:33 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Alexei Starovoitov says: ==================== pull-request: bpf 2018-12-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) promote bpf_perf_event.h to mandatory UAPI header, from Masahiro. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 06:30:33 UTC
78abe3d Myungho Jung 18 December 2018, 17:02:25 UTC net/smc: fix TCP fallback socket release clcsock can be released while kernel_accept() references it in TCP listen worker. Also, clcsock needs to wake up before released if TCP fallback is used and the clcsock is blocked by accept. Add a lock to safely release clcsock and call kernel_sock_shutdown() to wake up clcsock from accept in smc_release(). Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com Signed-off-by: Myungho Jung <mhjungk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 06:02:51 UTC
f7db2be Colin Ian King 18 December 2018, 15:19:47 UTC vxge: ensure data0 is initialized in when fetching firmware version information Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0. Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable") Fixes: 8424e00dfd52 ("vxge: serialize access to steering control register") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 06:00:40 UTC
d81c505 Juergen Gross 18 December 2018, 15:06:19 UTC xen/netfront: tolerate frags with no data At least old Xen net backends seem to send frags with no real data sometimes. In case such a fragment happens to occur with the frag limit already reached the frontend will BUG currently even if this situation is easily recoverable. Modify the BUG_ON() condition accordingly. Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:59:20 UTC
8742beb Kunihiko Hayashi 18 December 2018, 07:57:04 UTC net: phy: Fix the issue that netif always links up after resuming Even though the link is down before entering hibernation, there is an issue that the network interface always links up after resuming from hibernation. If the link is still down before enabling the network interface, and after resuming from hibernation, the phydev->state is forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up. In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend() calls phy_stop_machine(), and mdio_bus_phy_resume() calls phy_start_machine(). In resume sequence, it's enough to do the same as mdio_bus_phy_resume() because the state has been preserved. This patch fixes the issue by calling phy_start_machine() in mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume(). Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:48:15 UTC
15515aa Jason Martinsen 18 December 2018, 05:38:22 UTC lan78xx: Resolve issue with changing MAC address Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:40:59 UTC
0db7d25 Bryan Whitehead 17 December 2018, 21:44:50 UTC lan743x: Expand phy search for LAN7431 The LAN7431 uses an external phy, and it can be found anywhere in the phy address space. This patch uses phy address 1 for LAN7430 only. And searches all addresses otherwise. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:35:56 UTC
59fc137 David S. Miller 19 December 2018, 05:18:26 UTC Merge branch 'vxlan-Various-fixes' Petr Machata says: ==================== vxlan: Various fixes This patch set contains three fixes for the vxlan driver. Patch #1 fixes handling of offload mark on replaced VXLAN FDB entries. A way to trigger this is to replace the FDB entry with one that can not be offloaded. A future patch set should make it possible to veto such FDB changes. However the FDB might still fail to be offloaded due to another issue, and the offload mark should reflect that. Patch #2 fixes problems in __vxlan_dev_create() when a call to rtnl_configure_link() fails. These failures would be tricky to hit on a real system, the most likely vector is through an error in vxlan_open(). However, with the abovementioned vetoing patchset, vetoing the created entry would trigger the same problems (and be easier to reproduce). Patch #3 fixes a problem in vxlan_changelink(). In situations where the default remote configured in the FDB table (if any) does not exactly match the remote address configured at the VXLAN device, changing the remote address breaks the default FDB entry. Patch #4 is then a self test for this issue. v3: - Patch #2: - Reuse the same errout block for both cleanup paths. Use a bool to decide whether the unregister_netdevice() call should be made. v2: - Drop former patch #3 - Patch #2: - Delete the default entry before calling unregister_netdevice(). That takes care of former patch #3, hence tweak the commit message to mention that problem as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:18:26 UTC
55cbe07 Petr Machata 18 December 2018, 13:16:03 UTC selftests: net: Add test_vxlan_fdb_changelink.sh Add a test to exercise the fix from the previous patch. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:18:26 UTC
ce5e098 Petr Machata 18 December 2018, 13:16:02 UTC vxlan: changelink: Fix handling of default remotes Default remotes are stored as FDB entries with an Ethernet address of 00:00:00:00:00:00. When a request is made to change a remote address of a VXLAN device, vxlan_changelink() first deletes the existing default remote, and then creates a new FDB entry. This works well as long as the list of default remotes matches exactly the configuration of a VXLAN remote address. Thus when the VXLAN device has a remote of X, there should be exactly one default remote FDB entry X. If the VXLAN device has no remote address, there should be no such entry. Besides using "ip link set", it is possible to manipulate the list of default remotes by using the "bridge fdb". It is therefore easy to break the above condition. Under such circumstances, the __vxlan_fdb_delete() call doesn't delete the FDB entry itself, but just one remote. The following vxlan_fdb_create() then creates a new FDB entry, leading to a situation where two entries exist for the address 00:00:00:00:00:00, each with a different subset of default remotes. An even more obvious breakage rooted in the same cause can be observed when a remote address is configured for a VXLAN device that did not have one before. In that case vxlan_changelink() doesn't remove any remote, and just creates a new FDB entry for the new address: $ ip link add name vx up type vxlan id 2000 dstport 4789 $ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent $ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent $ ip link set dev vx type vxlan remote 192.0.2.30 $ bridge fdb sh dev vx | grep 00:00:00:00:00:00 00:00:00:00:00:00 dst 192.0.2.30 self permanent <- new entry, 1 rdst 00:00:00:00:00:00 dst 192.0.2.20 self permanent <- orig. entry, 2 rdsts 00:00:00:00:00:00 dst 192.0.2.30 self permanent To fix this, instead of calling vxlan_fdb_create() directly, defer to vxlan_fdb_update(). That has logic to handle the duplicates properly. Additionally, it also handles notifications, so drop that call from changelink as well. Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:18:26 UTC
6db9246 Petr Machata 18 December 2018, 13:16:00 UTC vxlan: Fix error path in __vxlan_dev_create() When a failure occurs in rtnl_configure_link(), the current code calls unregister_netdevice() to roll back the earlier call to register_netdevice(), and jumps to errout, which calls vxlan_fdb_destroy(). However unregister_netdevice() calls transitively ndo_uninit, which is vxlan_uninit(), and that already takes care of deleting the default FDB entry by calling vxlan_fdb_delete_default(). Since the entry added earlier in __vxlan_dev_create() is exactly the default entry, the cleanup code in the errout block always leads to double free and thus a panic. Besides, since vxlan_fdb_delete_default() always destroys the FDB entry with notification enabled, the deletion of the default entry is notified even before the addition was notified. Instead, move the unregister_netdevice() call after the manual destroy, which solves both problems. Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:18:25 UTC
6ad0b5a Petr Machata 18 December 2018, 13:15:59 UTC vxlan: Unmark offloaded bit on replaced FDB entries When rdst of an offloaded FDB entry is replaced, it certainly isn't offloaded anymore. Drivers are notified about such replacements, and can re-mark the entry as offloaded again if they so wish. However until a driver does so explicitly, assume a replaced FDB entry is not offloaded. Note that replaces coming via vxlan_fdb_external_learn_add() are always immediately followed by an explicit offload marking. Fixes: 0efe11733356 ("vxlan: Support marking RDSTs as offloaded") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 05:18:25 UTC
a9d6d89 David S. Miller 19 December 2018, 00:17:49 UTC Merge branch 'macb-DMA-race-fixes' Anssi Hannula says: ==================== net: macb: DMA race condition fixes Here are a couple of race condition fixes for the macb driver. The first two are for issues observed at runtime on real HW. v2: - added received Tested-bys and Acked-bys to the first two patches - in patch 3/3, moved the timestamp protection barrier closer to the timestamp reads - in patch 3/3, removed unnecessary move of the addr assignment in gem_rx() to keep the patch minimal for maximum clarity - in patch 3/3, clarified commit message and comments The 3/3 is the same one I improperly sent last week as a standalone patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 00:17:49 UTC
6e0af29 Anssi Hannula 17 December 2018, 13:05:41 UTC net: macb: add missing barriers when reading descriptors When reading buffer descriptors on RX or on TX completion, an RX_USED/TX_USED bit is checked first to ensure that the descriptors have been populated, i.e. the ownership has been transferred. However, there are no memory barriers to ensure that the data protected by the RX_USED/TX_USED bit is up-to-date with respect to that bit. Specifically: - TX timestamp descriptors may be loaded before ctrl is loaded for the TX_USED check, which is racy as the descriptors may be updated between the loads, causing old timestamp descriptor data to be used. - RX ctrl may be loaded before addr is loaded for the RX_USED check, which is racy as a new frame may be written between the loads, causing old ctrl descriptor data to be used. This issue exists for both macb_rx() and gem_rx() variants. Fix the races by adding DMA read memory barriers on those paths and reordering the reads in macb_rx(). I have not observed any actual problems in practice caused by these being missing, though. Tested on a ZynqMP based system. Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 00:17:48 UTC
8159eca Anssi Hannula 17 December 2018, 13:05:40 UTC net: macb: fix dropped RX frames due to a race Bit RX_USED set to 0 in the address field allows the controller to write data to the receive buffer descriptor. The driver does not ensure the ctrl field is ready (cleared) when the controller sees the RX_USED=0 written by the driver. The ctrl field might only be cleared after the controller has already updated it according to a newly received frame, causing the frame to be discarded in gem_rx() due to unexpected ctrl field contents. A message is logged when the above scenario occurs: macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor Fix the issue by ensuring that when the controller sees RX_USED=0 the ctrl field is already cleared. This issue was observed on a ZynqMP based system. Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 00:17:48 UTC
e100a89 Anssi Hannula 17 December 2018, 13:05:39 UTC net: macb: fix random memory corruption on RX with 64-bit DMA 64-bit DMA addresses are split in upper and lower halves that are written in separate fields on GEM. For RX, bit 0 of the address is used as the ownership bit (RX_USED). When the RX_USED bit is unset the controller is allowed to write data to the buffer. The driver does not guarantee that the controller already sees the upper half when the RX_USED bit is cleared, possibly resulting in the controller writing an incoming frame to an address with an incorrect upper half and therefore possibly corrupting unrelated system memory. Fix that by adding the necessary DMA memory barrier between the writes. This corruption was observed on a ZynqMP based system. Fixes: fff8019a08b6 ("net: macb: Add 64 bit addressing support for GEM") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Acked-by: Harini Katakam <harini.katakam@xilinx.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2018, 00:17:48 UTC
e2c4cf7 Davide Caratti 17 December 2018, 10:26:38 UTC net: Use __kernel_clockid_t in uapi net_stamp.h Herton reports the following error when building a userspace program that includes net_stamp.h: In file included from foo.c:2: /usr/include/linux/net_tstamp.h:158:2: error: unknown type name ‘clockid_t’ clockid_t clockid; /* reference clockid */ ^~~~~~~~~ Fix it by using __kernel_clockid_t in place of clockid_t. Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.") Cc: Timothy Redaelli <tredaelli@redhat.com> Reported-by: Herton R. Krzesinski <herton@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 23:59:29 UTC
4298388 Claudiu Beznea 17 December 2018, 10:02:42 UTC net: macb: restart tx after tx used bit read On some platforms (currently detected only on SAMA5D4) TX might stuck even the pachets are still present in DMA memories and TX start was issued for them. This happens due to race condition between MACB driver updating next TX buffer descriptor to be used and IP reading the same descriptor. In such a case, the "TX USED BIT READ" interrupt is asserted. GEM/MACB user guide specifies that if a "TX USED BIT READ" interrupt is asserted TX must be restarted. Restart TX if used bit is read and packets are present in software TX queue. Packets are removed from software TX queue if TX was successful for them (see macb_tx_interrupt()). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 23:57:07 UTC
62393db Linus Torvalds 18 December 2018, 23:47:40 UTC Merge tag 'for-linus-20181218' of git://git.kernel.dk/linux-block Pull block fix from Jens Axboe: "Correct an ioctl direction for the zoned ioctls" * tag 'for-linus-20181218' of git://git.kernel.dk/linux-block: uapi: linux/blkzoned.h: fix BLKGETZONESZ and BLKGETNRZONES definitions 18 December 2018, 23:47:40 UTC
e738441 Linus Torvalds 18 December 2018, 23:45:38 UTC Merge tag 'pci-v4.20-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix the ACPI APEI error path, which previously queued several uninitialized events (Yanjiang Jin)" * tag 'pci-v4.20-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/AER: Queue one GHES event, not several uninitialized ones 18 December 2018, 23:45:38 UTC
b26322d Dan Carpenter 17 December 2018, 08:06:06 UTC net: stmmac: Fix an error code in probe() The function should return an error if create_singlethread_workqueue() fails. Fixes: 34877a15f787 ("net: stmmac: Rework and fix TX Timeout code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 23:45:28 UTC
3c6306d Cong Wang 17 December 2018, 07:25:12 UTC tipc: check group dests after tipc_wait_for_cond() Similar to commit 143ece654f9f ("tipc: check tsk->group in tipc_wait_for_cond()") we have to reload grp->dests too after we re-take the sock lock. This means we need to move the dsts check after tipc_wait_for_cond() too. Fixes: 75da2163dbb6 ("tipc: introduce communication groups") Reported-and-tested-by: syzbot+99f20222fc5018d2b97a@syzkaller.appspotmail.com Cc: Ying Xue <ying.xue@windriver.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 23:44:23 UTC
f07d427 Dan Carpenter 17 December 2018, 07:05:13 UTC qed: Fix an error code qed_ll2_start_xmit() We accidentally deleted the code to set "rc = -ENOMEM;" and this patch adds it back. Fixes: d2201a21598a ("qed: No need for LL2 frags indication") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 23:43:44 UTC
0067917 Antoine Tenart 11 December 2018, 16:32:28 UTC net: mvpp2: 10G modes aren't supported on all ports The mvpp2_phylink_validate() function sets all modes that are supported by a given PPv2 port. A recent change made all ports to advertise they support 10G modes in certain cases. This is not true, as only the port #0 can do so. This patch fixes it. Fixes: 01b3fd5ac97c ("net: mvpp2: fix detection of 10G SFP modules") Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 22:48:15 UTC
0e1b869 Eduardo Habkost 18 December 2018, 00:34:18 UTC kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs Some guests OSes (including Windows 10) write to MSR 0xc001102c on some cases (possibly while trying to apply a CPU errata). Make KVM ignore reads and writes to that MSR, so the guest won't crash. The MSR is documented as "Execution Unit Configuration (EX_CFG)", at AMD's "BIOS and Kernel Developer's Guide (BKDG) for AMD Family 15h Models 00h-0Fh Processors". Cc: stable@vger.kernel.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 18 December 2018, 21:15:44 UTC
dcbd3e4 Wanpeng Li 17 December 2018, 02:43:23 UTC KVM: X86: Fix NULL deref in vcpu_scan_ioapic Reported by syzkaller: CPU: 1 PID: 5962 Comm: syz-executor118 Not tainted 4.20.0-rc6+ #374 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvm_apic_hw_enabled arch/x86/kvm/lapic.h:169 [inline] RIP: 0010:vcpu_scan_ioapic arch/x86/kvm/x86.c:7449 [inline] RIP: 0010:vcpu_enter_guest arch/x86/kvm/x86.c:7602 [inline] RIP: 0010:vcpu_run arch/x86/kvm/x86.c:7874 [inline] RIP: 0010:kvm_arch_vcpu_ioctl_run+0x5296/0x7320 arch/x86/kvm/x86.c:8074 Call Trace: kvm_vcpu_ioctl+0x5c8/0x1150 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2596 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x1de/0x1790 fs/ioctl.c:696 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT14 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This patch fixes it by also considering whether or not apic is present. Reported-by: syzbot+39810e6c400efadfef71@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 18 December 2018, 21:15:44 UTC
c2dd514 Cfir Cohen 18 December 2018, 16:18:41 UTC KVM: Fix UAF in nested posted interrupt processing nested_get_vmcs12_pages() processes the posted_intr address in vmcs12. It caches the kmap()ed page object and pointer, however, it doesn't handle errors correctly: it's possible to cache a valid pointer, then release the page and later dereference the dangling pointer. I was able to reproduce with the following steps: 1. Call vmlaunch with valid posted_intr_desc_addr but an invalid MSR_EFER. This causes nested_get_vmcs12_pages() to cache the kmap()ed pi_desc_page and pi_desc. Later the invalid EFER value fails check_vmentry_postreqs() which fails the first vmlaunch. 2. Call vmlanuch with a valid EFER but an invalid posted_intr_desc_addr (I set it to 2G - 0x80). The second time we call nested_get_vmcs12_pages pi_desc_page is unmapped and released and pi_desc_page is set to NULL (the "shouldn't happen" clause). Due to the invalid posted_intr_desc_addr, kvm_vcpu_gpa_to_page() fails and nested_get_vmcs12_pages() returns. It doesn't return an error value so vmlaunch proceeds. Note that at this time we have a dangling pointer in vmx->nested.pi_desc and POSTED_INTR_DESC_ADDR in L0's vmcs. 3. Issue an IPI in L2 guest code. This triggers a call to vmx_complete_nested_posted_interrupt() and pi_test_and_clear_on() which dereferences the dangling pointer. Vulnerable code requires nested and enable_apicv variables to be set to true. The host CPU must also support posted interrupts. Fixes: 5e2f30b756a37 "KVM: nVMX: get rid of nested_get_page()" Cc: stable@vger.kernel.org Reviewed-by: Andy Honig <ahonig@google.com> Signed-off-by: Cfir Cohen <cfir@google.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 18 December 2018, 21:15:34 UTC
987d114 Eric Biggers 17 December 2018, 17:36:19 UTC KVM: fix unregistering coalesced mmio zone from wrong bus If you register a kvm_coalesced_mmio_zone with '.pio = 0' but then unregister it with '.pio = 1', KVM_UNREGISTER_COALESCED_MMIO will try to unregister it from KVM_PIO_BUS rather than KVM_MMIO_BUS, which is a no-op. But it frees the kvm_coalesced_mmio_dev anyway, causing a use-after-free. Fix it by only unregistering and freeing the zone if the correct value of 'pio' is provided. Reported-by: syzbot+f87f60bb6f13f39b54e3@syzkaller.appspotmail.com Fixes: 0804c849f1df ("kvm/x86 : add coalesced pio support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 18 December 2018, 21:07:25 UTC
a915b98 Jorgen Hansen 18 December 2018, 08:34:06 UTC VSOCK: Send reset control packet when socket is partially bound If a server side socket is bound to an address, but not in the listening state yet, incoming connection requests should receive a reset control packet in response. However, the function used to send the reset silently drops the reset packet if the sending socket isn't bound to a remote address (as is the case for a bound socket not yet in the listening state). This change fixes this by using the src of the incoming packet as destination for the reset packet in this case. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 19:53:42 UTC
fde9cd6 David S. Miller 18 December 2018, 19:43:26 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-12-18 1) Fix error return code in xfrm_output_one() when no dst_entry is attached to the skb. From Wei Yongjun. 2) The xfrm state hash bucket count reported to userspace is off by one. Fix from Benjamin Poirier. 3) Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry. 4) Fix freeing of xfrm states on acquire. We use a dedicated slab cache for the xfrm states now, so free it properly with kmem_cache_free. From Mathias Krause. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 19:43:26 UTC
ddfbab4 Linus Torvalds 18 December 2018, 17:38:34 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes: The t10-pi one is a regression from the 4.19 release, the qla2xxx one is a 4.20 merge window regression and the bnx2fc is a very old bug" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: t10-pi: Return correct ref tag when queue has no integrity profile scsi: bnx2fc: Fix NULL dereference in error handling Revert "scsi: qla2xxx: Fix NVMe Target discovery" 18 December 2018, 17:38:34 UTC
8d013b7 David S. Miller 18 December 2018, 17:17:39 UTC Merge branch 'mlxsw-VXLAN-and-firmware-flashing-fixes' Ido Schimmel says: ==================== mlxsw: VXLAN and firmware flashing fixes Patch #1 fixes firmware flashing failures by increasing the time period after which the driver fails the transaction with the firmware. The problem is explained in detail in the commit message. Patch #2 adds a missing trap for decapsulated ARP packets. It is necessary for VXLAN routing to work. Patch #3 fixes a memory leak during driver reload caused by NULLing a pointer before kfree(). Please consider patch #1 for 4.19.y ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 17:17:39 UTC
5edb7e8 Ido Schimmel 18 December 2018, 15:59:23 UTC mlxsw: spectrum_nve: Fix memory leak upon driver reload The pointer was NULLed before freeing the memory, resulting in a memory leak. Trace from kmemleak: unreferenced object 0xffff88820ae36528 (size 512): comm "devlink", pid 5374, jiffies 4295354033 (age 10829.296s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a43f5195>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000312f8140>] mlxsw_sp_nve_init+0xcb/0x1ae0 [<0000000009201d22>] mlxsw_sp_init+0x1382/0x2690 [<000000007227d877>] mlxsw_sp1_init+0x1b5/0x260 [<000000004a16feec>] __mlxsw_core_bus_device_register+0x776/0x1360 [<0000000070ab954c>] mlxsw_devlink_core_bus_device_reload+0x129/0x220 [<00000000432313d5>] devlink_nl_cmd_reload+0x119/0x1e0 [<000000003821a06b>] genl_family_rcv_msg+0x813/0x1150 [<00000000d54d04c0>] genl_rcv_msg+0xd1/0x180 [<0000000040543d12>] netlink_rcv_skb+0x152/0x3c0 [<00000000efc4eae8>] genl_rcv+0x2d/0x40 [<00000000ea645603>] netlink_unicast+0x52f/0x740 [<00000000641fca1a>] netlink_sendmsg+0x9c7/0xf50 [<00000000fed4a4b8>] sock_sendmsg+0xbe/0x120 [<00000000d85795a9>] __sys_sendto+0x397/0x620 [<00000000c5f84622>] __x64_sys_sendto+0xe6/0x1a0 Fixes: 6e6030bd5412 ("mlxsw: spectrum_nve: Implement common NVE core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 17:17:39 UTC
5d50439 Ido Schimmel 18 December 2018, 15:59:22 UTC mlxsw: spectrum: Add trap for decapsulated ARP packets After a packet was decapsulated it is classified to the relevant FID based on its VNI and undergoes L2 forwarding. Unlike regular (non-encapsulated) ARP packets, Spectrum does not trap decapsulated ARP packets during L2 forwarding and instead can only trap such packets in the underlay router during decapsulation. Add this missing packet trap, which is required for VXLAN routing when the MAC of the target host is not known. Fixes: b02597d513a9 ("mlxsw: spectrum: Add NVE packet traps") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 17:17:38 UTC
cf0b70e Shalom Toledo 18 December 2018, 15:59:20 UTC mlxsw: core: Increase timeout during firmware flash process During the firmware flash process, some of the EMADs get timed out, which causes the driver to send them again with a limit of 5 retries. There are some situations in which 5 retries is not enough and the EMAD access fails. If the failed EMAD was related to the flashing process, the driver fails the flashing. The reason for these timeouts during firmware flashing is cache misses in the CPU running the firmware. In case the CPU needs to fetch instructions from the flash when a firmware is flashed, it needs to wait for the flashing to complete. Since flashing takes time, it is possible for pending EMADs to timeout. Fix by increasing EMADs' timeout while flashing firmware. Fixes: ce6ef68f433f ("mlxsw: spectrum: Implement the ethtool flash_device callback") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 17:17:38 UTC
abc1327 Trond Myklebust 17 December 2018, 22:33:33 UTC SUNRPC: Remove xprt_connect_status() Over the years, xprt_connect_status() has been superseded by call_connect_status(), which now handles all the errors that xprt_connect_status() does and more. Since the latter converts all errors that it doesn't recognise to EIO, then it is time for it to be retired. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 18 December 2018, 16:04:10 UTC
cf76785 Trond Myklebust 17 December 2018, 22:38:51 UTC SUNRPC: Fix a race with XPRT_CONNECTING Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that we don't have races between the (asynchronous) socket setup code and tasks in xprt_connect(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 18 December 2018, 16:04:03 UTC
0445f92 Trond Myklebust 17 December 2018, 18:34:59 UTC SUNRPC: Fix disconnection races When the socket is closed, we need to call xprt_disconnect_done() in order to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks. However, we also want to ensure that we don't wake them up before the socket is closed, since that would cause thundering herd issues with everyone piling up to retransmit before the TCP shutdown dance has completed. Only the task that holds XPRT_LOCKED needs to wake up early in order to allow the close to complete. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Reported-by: Scott Mayhew <smayhew@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 18 December 2018, 16:03:57 UTC
a50e5fb Sara Sharon 15 December 2018, 09:03:10 UTC mac80211: fix a kernel panic when TXing after TXQ teardown Recently TXQ teardown was moved earlier in ieee80211_unregister_hw(), to avoid a use-after-free of the netdev data. However, interfaces aren't fully removed at the point, and cfg80211_shutdown_all_interfaces can for example, TX a deauth frame. Move the TXQ teardown to the point between cfg80211_shutdown_all_interfaces and the free of netdev queues, so we can be sure they are torn down before netdev is freed, but after there is no ongoing TX. Fixes: 77cfaf52eca5 ("mac80211: Run TXQ teardown code before de-registering interfaces") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 18 December 2018, 12:03:32 UTC
a5f3932 Vivien Didelot 17 December 2018, 21:05:21 UTC net: dsa: mv88e6xxx: set ethtool regs version Currently the ethtool_regs version is set to 0 for all DSA drivers. Use this field to store the chip ID to simplify the pretty dump of any interfaces registered by the "dsa" driver. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 07:29:00 UTC
b332990 David S. Miller 18 December 2018, 07:27:01 UTC Merge branch 'net-SO_TIMESTAMPING-fixes' Willem de Bruijn says: ==================== net: SO_TIMESTAMPING fixes Fix two omissions: - tx timestamping is missing for AF_INET6/SOCK_RAW/IPPROTO_RAW - SOF_TIMESTAMPING_OPT_ID is missing for IPPROTO_RAW, PF_PACKET, CAN Discovered while expanding the selftest in tools/testing/selftests/networking/timestamping/txtimestamp.c Will send the test patchset to net-next once the fixes make it to that branch. For now, it is available at https://github.com/wdebruij/linux/commits/txtimestamp-test-1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 07:27:01 UTC
8f932f7 Willem de Bruijn 17 December 2018, 17:24:00 UTC net: add missing SOF_TIMESTAMPING_OPT_ID support SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets. But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN. Add skb_setup_tx_timestamp that configures both tx_flags and tskey for these paths that do not need corking or use bytestream keys. Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 07:27:00 UTC
fbfb232 Willem de Bruijn 17 December 2018, 17:23:59 UTC ipv6: add missing tx timestamping on IPPROTO_RAW Raw sockets support tx timestamping, but one case is missing. IPPROTO_RAW takes a separate packet construction path. raw_send_hdrinc has an explicit call to sock_tx_timestamp, but rawv6_send_hdrinc does not. Add it. Fixes: 11878b40ed5c ("net-timestamp: SOCK_RAW and PING timestamping") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2018, 07:27:00 UTC
1a9430d Mimi Zohar 18 December 2018, 00:14:49 UTC ima: cleanup the match_token policy code Start the policy_tokens and the associated enumeration from zero, simplifying the pt macro. Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 December 2018, 00:31:28 UTC
94c13f6 Linus Torvalds 17 December 2018, 19:39:57 UTC security: don't use a negative Opt_err token index The code uses a bitmap to check for duplicate tokens during parsing, and that doesn't work at all for the negative Opt_err token case. There is absolutely no reason to make Opt_err be negative, and in fact it only confuses things, since some of the affected functions actually return a positive Opt_xyz enum _or_ a regular negative error code (eg -EINVAL), and using -1 for Opt_err makes no sense. There are similar problems in ima_policy.c and key encryption, but they don't have the immediate bug wrt bitmap handing, and ima_policy.c in particular needs a different patch to make the enum values match the token array index. Mimi is sending that separately. Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com Reported-by: Eric Biggers <ebiggers@kernel.org> Fixes: 5208cc83423d ("keys, trusted: fix: *do not* allow duplicate key options") Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Cc: James Morris James Morris <jmorris@namei.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 December 2018, 00:21:48 UTC
255fe81 Vivien Didelot 17 December 2018, 21:29:01 UTC MAINTAINERS: change my email address Make my Gmail address the primary one from now on. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2018, 23:05:00 UTC
bcb671c Masahiro Yamada 16 December 2018, 15:04:40 UTC bpf: promote bpf_perf_event.h to mandatory UAPI header Since commit c895f6f703ad ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type"), all architectures (except um) are required to have bpf_perf_event.h in uapi/asm. Add it to mandatory-y so "make headers_install" can check it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 17 December 2018, 21:00:10 UTC
c92a54c Lendacky, Thomas 17 December 2018, 14:39:16 UTC dma-direct: do not include SME mask in the DMA supported check The dma_direct_supported() function intends to check the DMA mask against specific values. However, the phys_to_dma() function includes the SME encryption mask, which defeats the intended purpose of the check. This results in drivers that support less than 48-bit DMA (SME encryption mask is bit 47) from being able to set the DMA mask successfully when SME is active, which results in the driver failing to initialize. Change the function used to check the mask from phys_to_dma() to __phys_to_dma() so that the SME encryption mask is not part of the check. Fixes: c1d0af1a1d5d ("kernel/dma/direct: take DMA offset into account in dma_direct_supported") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 17 December 2018, 17:02:11 UTC
3c9dc27 Paul Burton 16 December 2018, 20:10:01 UTC Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again" Commit f6aa5beb45be ("serial: 8250: Fix clearing FIFOs in RS485 mode again") makes a change to FIFO clearing code which its commit message suggests was intended to be specific to use with RS485 mode, however: 1) The change made does not just affect __do_stop_tx_rs485(), it also affects other uses of serial8250_clear_fifos() including paths for starting up, shutting down or auto-configuring a port regardless of whether it's an RS485 port or not. 2) It makes the assumption that resetting the FIFOs is a no-op when FIFOs are disabled, and as such it checks for this case & explicitly avoids setting the FIFO reset bits when the FIFO enable bit is clear. A reading of the PC16550D manual would suggest that this is OK since the FIFO should automatically be reset if it is later enabled, but we support many 16550-compatible devices and have never required this auto-reset behaviour for at least the whole git era. Starting to rely on it now seems risky, offers no benefit, and indeed breaks at least the Ingenic JZ4780's UARTs which reads garbage when the RX FIFO is enabled if we don't explicitly reset it. 3) By only resetting the FIFOs if they're enabled, the behaviour of serial8250_do_startup() during boot now depends on what the value of FCR is before the 8250 driver is probed. This in itself seems questionable and leaves us with FCR=0 & no FIFO reset if the UART was used by 8250_early, otherwise it depends upon what the bootloader left behind. 4) Although the naming of serial8250_clear_fifos() may be unclear, it is clear that callers of it expect that it will disable FIFOs. Both serial8250_do_startup() & serial8250_do_shutdown() contain comments to that effect, and other callers explicitly re-enable the FIFOs after calling serial8250_clear_fifos(). The premise of that patch that disabling the FIFOs is incorrect therefore seems wrong. For these reasons, this reverts commit f6aa5beb45be ("serial: 8250: Fix clearing FIFOs in RS485 mode again"). Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: f6aa5beb45be ("serial: 8250: Fix clearing FIFOs in RS485 mode again"). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Jedrychowski <avistel@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: linux-mips@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: stable <stable@vger.kernel.org> # 4.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 December 2018, 15:18:29 UTC
2419f30 Nicolas Saenz Julienne 17 December 2018, 13:37:40 UTC USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd As commented in the struct's definition there shouldn't be anything underneath its 'priv[0]' member as it would break some macros. The patch converts the broken_suspend into a bit-field and relocates it next to to the rest of bit-fields. Fixes: a7d57abcc8a5 ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC") Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 December 2018, 15:01:02 UTC
eca1e56 Emmanuel Grumbach 14 December 2018, 16:30:22 UTC iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares Old firmware versions don't support this command. Sending it to any firmware before -41.ucode will crash the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975 Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE") CC: <stable@vger.kernel.org> #4.19+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 17 December 2018, 13:15:22 UTC
e3ae340 Ulf Hansson 10 December 2018, 16:52:38 UTC mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl Some eMMCs from Micron have been reported to need ~800 ms timeout, while enabling the CACHE ctrl after running sudden power failure tests. The needed timeout is greater than what the card specifies as its generic CMD6 timeout, through the EXT_CSD register, hence the problem. Normally we would introduce a card quirk to extend the timeout for these specific Micron cards. However, due to the rather complicated debug process needed to find out the error, let's simply use a minimum timeout of 1600ms, the double of what has been reported, for all cards when enabling CACHE ctrl. Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reported-by: Andreas Dannenberg <dannenberg@ti.com> Reported-by: Faiz Abbas <faiz_abbas@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 December 2018, 07:59:42 UTC
ba9f39a Ulf Hansson 10 December 2018, 16:52:37 UTC mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards"), then intent was to prevent HPI from being used for some eMMC cards, which didn't properly support it. However, that went too far, as even BKOPS and CACHE ctrl became prevented. Let's restore those parts and allow BKOPS and CACHE ctrl even if HPI isn't supported. Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards") Cc: Pratibhasagar V <pratibha@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 December 2018, 07:57:18 UTC
a0741ba Ulf Hansson 10 December 2018, 16:52:36 UTC mmc: core: Reset HPI enabled state during re-init and in case of errors During a re-initialization of the eMMC card, we may fail to re-enable HPI. In these cases, that isn't properly reflected in the card->ext_csd.hpi_en bit, as it keeps being set. This may cause following attempts to use HPI, even if's not enabled. Let's fix this! Fixes: eb0d8f135b67 ("mmc: core: support HPI send command") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 December 2018, 07:56:54 UTC
0b47979 Russell King 11 December 2018, 14:41:31 UTC mmc: omap_hsmmc: fix DMA API warning While booting with rootfs on MMC, the following warning is encountered on OMAP4430: omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536] This is because the DMA engine has a default maximum segment size of 64K but HSMMC sets: mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; which ends up telling the block layer that we support a maximum segment size of 65535*512, which exceeds the advertised DMA engine capabilities. Fix this by clamping the maximum segment size to the lower of the maximum request size and of the DMA engine device used for either DMA channel. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 December 2018, 07:43:19 UTC
back to top