https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
e37469f FRV: Wire up new syscalls Wire up new system calls for the FRV arch (preadv and pwritev). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 April 2009, 15:04:48 UTC
9b820a8 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hpet: Stop soliciting hpet=force users on ICH4M x86: check boundary in setup_node_bootmem() uv_time: add parameter to uv_read_rtc() x86: hpet: fix periodic mode programming on AMD 81xx x86: more than 8 32-bit CPUs requires X86_BIGSMP x86: avoid theoretical spurious NMI backtraces with CONFIG_CPUMASK_OFFSTACK=y x86: fix boot crash in NMI watchdog with CONFIG_CPUMASK_OFFSTACK=y and flat APIC x86-64: fix FPU corruption with signals and preemption x86/uv: fix for no memory at paddr 0 docs, x86: add nox2apic back to kernel-parameters.txt x86: mm/numa_32.c calculate_numa_remap_pages should use __init x86, kbuild: make "make install" not depend on vmlinux x86/uv: fix init of cpu-less nodes x86/uv: fix init of memory-less nodes 26 April 2009, 17:29:38 UTC
fc2e318 Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/irq: mark NUMA_MIGRATE_IRQ_DESC broken x86, irq: Remove IRQ_DISABLED check in process context IRQ move 26 April 2009, 17:29:18 UTC
1e4b978 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: locking: clarify kernel-taint warning message lockdep, x86: account for irqs enabled in paranoid_exit lockdep: more robust lockdep_map init sequence 26 April 2009, 17:29:01 UTC
ce8a742 sparc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: David S. Miller <davem@davemloft.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:39 UTC
bbe215c sh: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:39 UTC
2133bb8 s390: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:39 UTC
e703984 powerpc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
9760f8f mn10300: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
6f335ca m68k: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
3496369 m32r: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
b6a8d95 frv: convert frv to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
92ca523 alpha: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Richard Henderson <rth@twiddle.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
0ebdcb4 xtensa: convert to use __HEAD and HEAD_TEXT macros. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Chris Zankel <chris@zankel.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
c80d471 Add new HEAD_TEXT_SECTION macro. This patch is preparation for replacing all uses of ".head.text" or ".text.head" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. Since some linker scripts do more complex things than referencing HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the actual name. I've defined HEAD_TEXT_SECTION in a new header, include/linux/section-names.h, so that this section name only needs to appear in one place. I anticipate creating similar macro structures for a number of other section names. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".text.foo". Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 April 2009, 16:20:38 UTC
0c8454f PM/Hibernate: Fix waiting for image device to appear on resume Commit c751085943362143f84346d274e0011419c84202 ("PM/Hibernate: Wait for SCSI devices scan to complete during resume") added a call to scsi_complete_async_scans() to software_resume(), so that it waited for the SCSI scanning to complete, but the call was added at a wrong place. Namely, it should have been added after wait_for_device_probe(), which is called only if the image partition hasn't been specified yet. Also, it's reasonable to check if the image partition is present and only wait for the device probing and SCSI scanning to complete if it is not the case. Additionally, since noresume is checked right at the beginning of software_resume() and the function returns immediately if it's set, it doesn't make sense to check it once again later. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 22:31:30 UTC
4b2b0b9 ROMFS: Advance destination buffer pointer when reading from a blockdev RomFS should advance the destination buffer pointer when reading data from a blockdev source (the data may be split over multiple blocks, each requiring its own sb_read() call). Without this, all the data is copied to the beginning of the output buffer. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 20:28:31 UTC
84baf74 ROMFS: romfs_lookup() shouldn't be doing a partial name comparison romfs_lookup() should be using a routine akin to strcmp() on the backing store, rather than one akin to strncmp(). If it uses the latter, it's liable to match /bin/shutdown when looking up /bin/sh. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 20:28:31 UTC
a5422a5 lib: find_last_bit.o needed by a module only, move it from lib to obj Currently, although find_last_bit is EXPORTed, it is statically linked with the kernel and is referenced only under CONFIG_SMP. When CONFIG_SMP is undefined and find_last_bit is referenced only by modules, linking fails with: ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined! Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 20:28:31 UTC
91ac033 CacheFiles: Fix the documentation to use the correct credential pointer names Adjust the CacheFiles documentation to use the correct names of the credential pointers in task_struct. The documentation was using names from the old versions of the credentials patches. Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 20:28:30 UTC
e5b8954 virtio-rng: Remove false BUG for spurious callbacks The virtio-rng drivers checks for spurious callbacks. Since callbacks can be implemented via shared interrupts (e.g. PCI) this could lead to guest kernel oopses with lots of virtio devices. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 20:28:30 UTC
9f5a691 Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze * 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: add parameter to microblaze_read() microblaze: Use CFLAGS_KERNEL instead of CFLAGS microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too microblaze: Do not check use_dcache microblaze: Do not use PVR configuration for broken MB version microblaze: Fix USR1/2 pvr printing message microblaze: iowrite upon timeout microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig microblaze: Remove redundant variable microblaze: Move start_thread to process.c microblaze: Add missing preadv and pwritev syscalls microblaze: Add missing declaration for die and _exception func microblaze: Remove sparse error in traps.c microblaze: Move task_pt_regs up microblaze: Rename kernel_mode to pt_mode in pt_regs microblaze: Remove uncache shadow condition microblaze: Remove while(1) loop from show_regs function microblaze: Remove unneded per cpu SYSCALL_SAVE variable 24 April 2009, 15:54:30 UTC
ef54b1b Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI, i915: Register ACPI video even when not modesetting Revert "ACPICA: delete check for AML access to port 0x81-83" I/O port protection: update for windows compatibility. sony-laptop: always try to unblock rfkill on load sony-laptop: fix bogus error message display on resume ACPI: EC: Fix ACPI EC resume non-query interrupt message sony-laptop: SNC input event 38 fix sony-laptop: SNC 127 Initialization Fix sony-laptop: Duplicate SNC 127 Event Fix ACPI: prevent processor.max_cstate=0 boot crash ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M ACPI: delete obsolete "bus master activity" proc field ACPI: idle: mark_tsc_unstable() at init-time, not run-time ACPI: add /sys/firmware/acpi/interrupts/sci_not counter ACPI video: fix an error when the brightness levels on AC and on Battery are same acpi-cpufreq: Do not let get_measured perf depend on internal variable acpi-cpufreq: style-only: add parens to math expression acpi-cpufreq: Cleanup: Use printk_once x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf thinkpad-acpi: bump up version to 0.23 ... 24 April 2009, 15:48:17 UTC
9fe9293 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: update the default config for the ColdFire 5407C3 board m68knommu: update the default config for the ColdFire 5307C3 board m68knommu: update the default config for the ColdFire 5257EVB board m68knommu: update the default config for the ColdFire 5249EVB. m68knommu: add a defconfig for the ColdFire M5272C3 board m68knommu: update the defconfig for the ColdFire 5208evb board m68knommu: fix DMA support for ColdFire m68knommu: remove unused kernel stats offsets m68knommu: fix missing .data.cacheline_aligned section m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC. 24 April 2009, 15:45:53 UTC
a4277bf Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix potential inode allocation soft lockup in Orlov allocator ext4: Make the extent validity check more paranoid jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records ext4: really print the find_group_flex fallback warning only once 24 April 2009, 15:37:40 UTC
6ae85d6 Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5460/1: Orion: reduce namespace pollution [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config [ARM] 5457/1: mach-imx gpio buildfix [ARM] 5456/1: add sys_preadv and sys_pwritev [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones [ARM] pxa/palm27x: General fix for Palm27x aSoC driver [ARM] pxa/mioa701: use GPIO95 as AC97 reset line [ARM] pxa: merge AC97 platform data structures [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h 24 April 2009, 15:36:41 UTC
d72cd3a Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: pwc : do not pass stack allocated buffers to USB core. USB: otg: Fix bug on remove path without transceiver USB: correct error handling in cdc-wdm USB: removal of tty->low_latency hack dating back to the old serial code USB: serial: sierra driver bug fix for composite interface USB: gadget: omap_udc uses platform_driver_probe() USB: ci13xxx_udc: fix build error USB: musb: Prevent multiple includes of musb.h USB: pass mem_flags to dma_alloc_coherent USB: g_file_storage: fix use-after-free bug when closing files USB: ehci-sched.c: EHCI SITD scheduling bugfix USB: fix mos7840 problem with minor numbers USB: mos7840: add new device id USB: musb: fix build when !CONFIG_PM USB: musb: Remove my email address from few musb related drivers USB: Gadget: MIPS CI13xxx UDC bugfixes USB: Unusual Device support for Gold MP3 Player Energy USB: serial: fix lifetime and locking problems 24 April 2009, 15:36:06 UTC
ff91fad Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Larger buffer for encrypted symlink targets eCryptfs: Lock lower directory inode mutex during lookup eCryptfs: Remove ecryptfs_unlink_sigs warnings eCryptfs: Fix data corruption when using ecryptfs_passthrough eCryptfs: Print FNEK sig properly in /proc/mounts eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev() eCryptfs: Copy lower inode attrs before dentry instantiation 24 April 2009, 15:32:44 UTC
198aa04 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Update defconfigs for 2.6.30-rc3 m68k,m68knommu: Wire up preadv and pwritev scsi: a4000 - Correct driver unregistration in case of failure 24 April 2009, 15:32:23 UTC
58be18c Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] update default configuration. [S390] omit frame pointers on s390 when possible [S390] Use tape_generic_offline directly. [S390] /proc/stat idle field for idle cpus [S390] appldata: avoid deadlock with appldata_mem [S390] ipl: fix compile breakage 24 April 2009, 15:28:27 UTC
12bac70 Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Ensure that the inode goal block settings are updated GFS2: Fix bug in block allocation bitops: Add __ffs64 bitop 24 April 2009, 15:27:02 UTC
6091173 Merge branch 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Unregister cpufreq notifier on unload KVM: x86: release time_page on vcpu destruction KVM: Fix overlapping check for memory slots KVM: MMU: disable global page optimization KVM: ia64: fix locking order entering guest KVM: MMU: Fix off-by-one calculating large page count 24 April 2009, 15:26:01 UTC
d1f53fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: MAINTAINERS: update IDE entry palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup palm_bk3710: those registers/bitfields don't exist mediabay: fix build for CONFIG_BLOCK=n ide: Stop disks on reboot for laptop which cuts power ide-cd: fix kernel crash on hppa regression palm_bk3710: UDMA performance fix 24 April 2009, 15:16:05 UTC
90c8fce Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add quirk for Packard Bell RS65 [ALSA] intel8x0: another attempt to fix ac97_clock measure routine [ALSA] ac97_codec: increase timeout for analog subsections ALSA: hda - Add quirks for Realtek codecs ALSA: hda - Fix alc662_init_verbs ALSA: keywest: Convert to new-style i2c driver ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model) ALSA: us122l: add snd_us122l_free() ASoC: Fix warning in wm9705 ASoC: OMAP: Update contact addresses ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR ALSA: us122l: Fix signedness in comparisions 24 April 2009, 15:15:25 UTC
ec5f5bf radio_si470x: Fix free memory corruption The release path for a disconnected device frees the object then unlocks the mutex in the freed object... Found by Dan Carpenter using Smatch Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:52:08 UTC
79e95eb serial: remove contact data Remove my name and emailaddress from note in the source. Wincor Nixdorf only has some ITE-chips on their mainboards, other chips are not available for me for testing. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:52:08 UTC
67cd724 cafe_nand: Fix warning Wrong types on IRQ handler Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:52:08 UTC
97c68d0 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: cache prio_tree root in cfqq->p_root cfq-iosched: fix bug with aliased request and cooperation detection cfq-iosched: clear ->prio_trees[] on cfqd alloc block: fix intermittent dm timeout based oops umem: fix request_queue lock warning block: simplify I/O stat accounting pktcdvd.h should include mempool.h cfq-iosched: use the default seek distance when there aren't enough seek samples cfq-iosched: make seek_mean converge more quickly block: make blk_abort_queue() ignore non-request based devices block: include empty disks in /proc/diskstats bio: use bio_kmalloc() in copy/map functions bio: fix bio_kmalloc() block: fix queue bounce limit setting block: fix SG_IO vector request data length handling scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings 24 April 2009, 14:48:24 UTC
596a5c4 MN10300: Update the ASB2303 defconfig Update the defconfig for the ASB2303 evaluation board. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:47:59 UTC
418df63 Delete slow-work timers properly Slow-work appears to delete its timer as soon as the first user unregisters, even though other users could be active. At the same time, it never seems to delete slow_work_oom_timer. Arrange for both to happen in the shutdown path. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:47:59 UTC
3e241ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits) netfilter: ctnetlink: fix gcc warning during compilation net/netrom: Fix socket locking netlabel: Always remove the correct address selector ucc_geth.c: Fix upsmr setting in RMII mode 8139too: fix HW initial flow af_iucv: Fix race when queuing incoming iucv messages af_iucv: Test additional sk states in iucv_sock_shutdown af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag af_iucv: consider state IUCV_CLOSING when closing a socket iwlwifi: DMA fixes iwlwifi: add debugging for TX path mwl8: fix build warning. mac80211: fix alignment calculation bug mac80211: do not print WARN if config interface iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll iwlwifi: fix EEPROM validation mask to include OTP only devices atmel: fix netdev ops conversion pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails ... 24 April 2009, 14:46:51 UTC
dc0046c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Fix bus type probing for ESP and LE devices. sparc32: Update defconfig. sparc64: Update defconfig. 24 April 2009, 14:45:52 UTC
f8c3301 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Fix modular build of ide-pmac when mediabay is built in powerpc/pasemi: Fix build error on UP powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK maintainers: Fix PS3 patterns powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning powerpc/32: Don't clobber personality flags on exec powerpc: Fix crash on CPU hotplug powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover powerpc/85xx: Added SMP defconfig powerpc/85xx: Enabled a bunch of FSL specific drivers/options powerpc/85xx: Updated generic mpc85xx_defconfig powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD fsl_rio: Pass the proper device to dma mapping routines powerpc: Fix of_node_put() exit path in of_irq_map_one() powerpc/5200: defconfig updates powerpc/5200: Add FLASH nodes to lite5200 device tree powerpc/device-tree: Document MTD nodes with multiple "reg" tuples powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back 24 April 2009, 14:44:58 UTC
1162cf6 Merge branch 'bjorn.button' into release 24 April 2009, 14:42:29 UTC
5f855a8 Merge branch 'bugzilla-13036' into release 24 April 2009, 14:42:21 UTC
1fe94d3 Merge branch 'bugzilla-13048' into release 24 April 2009, 14:42:11 UTC
9c18f0b Merge branch 'bugzilla-13142' into release 24 April 2009, 14:42:03 UTC
3869e92 Merge branch 'hpet' into release 24 April 2009, 14:41:31 UTC
437f7fd check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/ write_lock(&current->fs->lock) guarantees we can't wrongly miss LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock() instead of ->siglock to iterate over the sub-threads. We must see all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it takes fs->lock too. With or without this patch we can miss the freshly cloned thread and set LSM_UNSAFE_SHARE, we don't care. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> [ Fixed lock/unlock typo - Hugh ] Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:39:45 UTC
8c652f9 do_execve() must not clear fs->in_exec if it was set by another thread If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec unconditionally. This is wrong if we race with our sub-thread which also does do_execve: Two threads T1 and T2 and another process P, all share the same ->fs. T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since ->fs is shared, we set LSM_UNSAFE but not ->in_exec. P exits and decrements fs->users. T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not shared, we set fs->in_exec. T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and return to the user-space. T1 does clone(CLONE_FS /* without CLONE_THREAD */). T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with another process. Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change do_execve() to clear ->in_exec depending on res. When do_execve() suceeds, it is safe to clear ->in_exec unconditionally. It can be set only if we don't share ->fs with another process, and since we already killed all sub-threads either ->in_exec == 0 or we are the only user of this ->fs. Also, we do not need fs->lock to clear fs->in_exec. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 April 2009, 14:39:45 UTC
f2d1f0a cfq-iosched: cache prio_tree root in cfqq->p_root Currently we look it up from ->ioprio, but ->ioprio can change if either the process gets its IO priority changed explicitly, or if cfq decides to temporarily boost it. So if we are unlucky, we can end up attempting to remove a node from a different rbtree root than where it was added. Fix this by using ->org_ioprio as the prio_tree index, since that will only change for explicit IO priority settings (not for a boost). Additionally cache the rbtree root inside the cfqq, then we don't have to add code to reinsert the cfqq in the prio_tree if IO priority changes. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:22 UTC
3ac6c9f cfq-iosched: fix bug with aliased request and cooperation detection cfq_prio_tree_lookup() should return the direct match, yet it always returns zero. Fix that. cfq_prio_tree_add() assumes that we don't get a direct match, while it is very possible that we do. Using O_DIRECT, you can have different cfqq with matching requests, since you don't have the page cache to serialize things for you. Fix this bug by only adding the cfqq if there isn't an existing match. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:22 UTC
26a2ac0 cfq-iosched: clear ->prio_trees[] on cfqd alloc Not strictly needed, but we should make it clear that we init the rbtree roots here. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:22 UTC
17d5c8c block: fix intermittent dm timeout based oops Very rarely under stress testing of dm, oopses are occuring as something tampers with an old stack frame. This has been traced back to blk_abort_queue() leaving a timeout_list pointing to the stack. The reason is that sometimes blk_abort_request() won't delete the timer (if the request is marked as complete but before the timer has been removed, a small race window). Fix this by splicing back from the ususally empty list to the q->timeout_list. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:21 UTC
f3c737d umem: fix request_queue lock warning The umem driver issues two warnings on boot, due to blk_plug_device() and blk_remove_plug() being called without q->queue_lock held. Starting with e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions warn if q->queue_lock doesn't appear to be locked. In fact, q->queue_lock is NULL (though that apparently isn't otherwise a problem as the driver is using card->lock for everything). Although blk_init_queue() with take a request_fn_proc and spinlock_t*, there isn't a corresponding init helper that takes a make_request_fn. Setting queue_lock to &card->lock explicitly seems to work fine for me. The warning goes away and the device appears to behave. [ 1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver [ 1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup)) [ 1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100) [ 1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE) [ 1.571114] umem 0000:02:01.0: Window size 16777216 bytes, IRQ 20 [ 1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device. [ 1.585989] umema:<4>------------[ cut here ]------------ [ 1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106() [ 1.592025] Hardware name: H8SSL [ 1.592025] Modules linked in: [ 1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8 [ 1.592025] Call Trace: [ 1.592025] [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2 [ 1.592025] [<ffffffff8025a5b5>] ? save_trace+0x3f/0x9b [ 1.592025] [<ffffffff8025a68b>] ? add_lock_to_list+0x7a/0xba [ 1.592025] [<ffffffff8025e609>] ? validate_chain+0xb3b/0xce8 [ 1.592025] [<ffffffff80441556>] ? mm_make_request+0x27/0x59 [ 1.592025] [<ffffffff80441556>] ? mm_make_request+0x27/0x59 [ 1.592025] [<ffffffff8025ef04>] ? __lock_acquire+0x74e/0x7b9 [ 1.592025] [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e [ 1.592025] [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27 [ 1.592025] [<ffffffff80441556>] ? mm_make_request+0x27/0x59 [ 1.592025] [<ffffffff803ad165>] blk_plug_device+0x6d/0x106 [ 1.592025] [<ffffffff80441575>] mm_make_request+0x46/0x59 [ 1.592025] [<ffffffff803ac2d9>] generic_make_request+0x335/0x3cf [ 1.592025] [<ffffffff8027fcc7>] ? mempool_alloc_slab+0x11/0x13 [ 1.592025] [<ffffffff8027fdce>] ? mempool_alloc+0x45/0x101 [ 1.592025] [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27 [ 1.592025] [<ffffffff803adda5>] submit_bio+0x10a/0x119 [ 1.592025] [<ffffffff802c8d00>] submit_bh+0xe5/0x109 [ 1.592025] [<ffffffff802cbf43>] block_read_full_page+0x2aa/0x2cb [ 1.592025] [<ffffffff802cf4c4>] ? blkdev_get_block+0x0/0x4c [ 1.592025] [<ffffffff805c90a8>] ? _spin_unlock_irq+0x36/0x51 [ 1.592025] [<ffffffff80286836>] ? __lru_cache_add+0x92/0xb2 [ 1.592025] [<ffffffff802cf008>] blkdev_readpage+0x13/0x15 [ 1.592025] [<ffffffff8027de06>] read_cache_page_async+0x90/0x134 [ 1.592025] [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15 [ 1.592025] [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c [ 1.592025] [<ffffffff8027deb8>] read_cache_page+0xe/0x45 [ 1.592025] [<ffffffff802f5170>] read_dev_sector+0x2e/0x93 [ 1.592025] [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c [ 1.592025] [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf [ 1.592025] [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c [ 1.592025] [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb [ 1.592025] [<ffffffff802ceae9>] __blkdev_get+0x259/0x336 [ 1.592025] [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b [ 1.592025] [<ffffffff802cebd1>] blkdev_get+0xb/0xd [ 1.592025] [<ffffffff802f5773>] register_disk+0xc4/0x12b [ 1.592025] [<ffffffff803b2a7b>] add_disk+0xc3/0x12d [ 1.592025] [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5 [ 1.592025] [<ffffffff808a1e73>] mm_init+0x129/0x1a5 [ 1.592025] [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5 [ 1.592025] [<ffffffff80209056>] _stext+0x56/0x130 [ 1.592025] [<ffffffff80274932>] ? register_irq_proc+0xae/0xca [ 1.592025] [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b [ 1.592025] [<ffffffff8087f975>] kernel_init+0x132/0x18b [ 1.592025] [<ffffffff8020d17a>] child_rip+0xa/0x20 [ 1.592025] [<ffffffff8020cb40>] ? restore_args+0x0/0x30 [ 1.592025] [<ffffffff8087f843>] ? kernel_init+0x0/0x18b [ 1.592025] [<ffffffff8020d170>] ? child_rip+0x0/0x20 [ 1.592025] ---[ end trace 7150b3b86da74e1e ]--- [ 1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91() [ 1.893848] Hardware name: H8SSL [ 1.893848] Modules linked in: [ 1.893848] Pid: 1, comm: swapper Tainted: G W 2.6.29 #8 [ 1.893848] Call Trace: [ 1.893848] [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2 [ 1.893848] [<ffffffff805c8411>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1.893848] [<ffffffff8020cb40>] ? restore_args+0x0/0x30 [ 1.893848] [<ffffffff80254245>] ? __atomic_notifier_call_chain+0x0/0xb2 [ 1.893848] [<ffffffff805c90a3>] ? _spin_unlock_irq+0x31/0x51 [ 1.893848] [<ffffffff805c90bf>] ? _spin_unlock_irq+0x4d/0x51 [ 1.893848] [<ffffffff8044157d>] ? mm_make_request+0x4e/0x59 [ 1.893848] [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e [ 1.893848] [<ffffffff8025a75d>] ? put_lock_stats+0x25/0x27 [ 1.893848] [<ffffffff80441504>] ? mm_unplug_device+0x25/0x50 [ 1.893848] [<ffffffff803acf23>] blk_remove_plug+0x5f/0x91 [ 1.893848] [<ffffffff8044150f>] mm_unplug_device+0x30/0x50 [ 1.893848] [<ffffffff803ab74a>] blk_unplug+0x78/0x7d [ 1.893848] [<ffffffff803ab75c>] blk_backing_dev_unplug+0xd/0xf [ 1.893848] [<ffffffff802c853c>] block_sync_page+0x4a/0x4c [ 1.893848] [<ffffffff8027da1c>] sync_page+0x44/0x4d [ 1.893848] [<ffffffff805c66fd>] __wait_on_bit_lock+0x42/0x8a [ 1.893848] [<ffffffff8027d9d8>] ? sync_page+0x0/0x4d [ 1.893848] [<ffffffff8027d9c4>] __lock_page+0x64/0x6b [ 1.893848] [<ffffffff802508db>] ? wake_bit_function+0x0/0x2a [ 1.893848] [<ffffffff8027de4a>] read_cache_page_async+0xd4/0x134 [ 1.893848] [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15 [ 1.893848] [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c [ 1.893848] [<ffffffff8027deb8>] read_cache_page+0xe/0x45 [ 1.893848] [<ffffffff802f5170>] read_dev_sector+0x2e/0x93 [ 1.893848] [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c [ 1.893848] [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf [ 1.893848] [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c [ 1.893848] [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb [ 1.893848] [<ffffffff802ceae9>] __blkdev_get+0x259/0x336 [ 1.893848] [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b [ 1.893848] [<ffffffff802cebd1>] blkdev_get+0xb/0xd [ 1.893848] [<ffffffff802f5773>] register_disk+0xc4/0x12b [ 1.893848] [<ffffffff803b2a7b>] add_disk+0xc3/0x12d [ 1.893848] [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5 [ 1.893848] [<ffffffff808a1e73>] mm_init+0x129/0x1a5 [ 1.893848] [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5 [ 1.893848] [<ffffffff80209056>] _stext+0x56/0x130 [ 1.893848] [<ffffffff80274932>] ? register_irq_proc+0xae/0xca [ 1.893848] [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b [ 1.893848] [<ffffffff8087f975>] kernel_init+0x132/0x18b [ 1.893848] [<ffffffff8020d17a>] child_rip+0xa/0x20 [ 1.893848] [<ffffffff8020cb40>] ? restore_args+0x0/0x30 [ 1.893848] [<ffffffff8087f843>] ? kernel_init+0x0/0x18b [ 1.893848] [<ffffffff8020d170>] ? child_rip+0x0/0x20 [ 1.893848] ---[ end trace 7150b3b86da74e1f ]--- Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:21 UTC
42dad76 block: simplify I/O stat accounting This simplifies I/O stat accounting switching code and separates it completely from I/O scheduler switch code. Requests are accounted according to the state of their request queue at the time of the request allocation. There is no need anymore to flush the request queue when switching I/O accounting state. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:21 UTC
097102c pktcdvd.h should include mempool.h Fix this build error: In file included from fs/compat_ioctl.c:104: include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 24 April 2009, 06:54:21 UTC
d2c8604 x86, hpet: Stop soliciting hpet=force users on ICH4M The HPET in the ICH4M is not documented in the data sheet because it was not officially validated. While it is fine for hackers to continue to use "hpet=force" to enable the hardware that they have, it is not prudent to solicit additional "hpet=force" users on this hardware. [ Impact: remove hpet=force syslog message on old-ICH systems ] Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> LKML-Reference: <alpine.LFD.2.00.0904231918510.15843@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> 24 April 2009, 06:41:39 UTC
2d40570 Merge branch 'bugzilla-12249' into release 24 April 2009, 05:35:46 UTC
04a2e62 Merge branch 'bugzilla-12270' into release 24 April 2009, 05:35:33 UTC
ac0849f Merge branch 'bugzilla-13041' into release 24 April 2009, 05:35:24 UTC
09041da Merge branch 'cpufreq' into release 24 April 2009, 05:35:15 UTC
f752a09 Merge branch 'idle' into release 24 April 2009, 05:35:08 UTC
6e6c348 Merge branch 'irq' into release 24 April 2009, 05:34:59 UTC
7f3745a Merge branch 'sony-laptop' into release 24 April 2009, 05:34:52 UTC
771e5ce Merge branch 'thermal-regression' into release 24 April 2009, 05:34:45 UTC
7b80601 Merge branch 'thinkpad-acpi' into release 24 April 2009, 05:34:37 UTC
60cd8ad Merge branch 'video-ac-dc' into release 24 April 2009, 05:34:29 UTC
b7f0ab4 ACPI, i915: Register ACPI video even when not modesetting The ACPI video driver defers registration to the i915 driver if the system supports opregion-mediated backlight control. This registration was only being performed in the KMS case. Ensure it's done even if we don't have modesetting enabled. http://bugzilla.kernel.org/show_bug.cgi?id=13048 Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 04:42:06 UTC
a38d75f Revert "ACPICA: delete check for AML access to port 0x81-83" This reverts commit fdbdc7fc79c02ae4ede869d514179a2c65633d28. That temporary quick-fix is no longer necessary, as the previous patch, a65131e942e25c707a652fa4ec2cfcd8b63fec11, "I/O port protection: update for windows compatibility" should handle this issue for all ports, including this one. Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 04:32:52 UTC
a65131e I/O port protection: update for windows compatibility. For windows compatibility, 1) On a port protection violation, simply ignore the request and do not return an exception (allow the control method to continue execution.) 2) If only part of the request overlaps a protected port, read/write the individual ports that are not protected. http://bugzilla.kernel.org/show_bug.cgi?id=13036 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 04:25:55 UTC
53005a0 sony-laptop: always try to unblock rfkill on load This fixes an inconsistent behaviour when loading the driver with the switch on or off. In the former case you would also need to soft unblock the switch via the sysfs file entries to really disable rfkill, in the latter you wouldn't. Signed-off-by: Mattia Dongili <malattia@linux.it> Cc: Matthias Welwarsky <matze@welwarsky.de> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:57:34 UTC
c35d4b3 sony-laptop: fix bogus error message display on resume sony_backlight_update_status returns 0 on success -1 on failure (i.e.: the return value from acpi_callsetfunc. The return value in the resume path was broken and thus always displaying a bogus warning about not being able to restore the brightness level. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:57:34 UTC
5aa63f0 ACPI: EC: Fix ACPI EC resume non-query interrupt message When resuming from standby (on a laptop) I see the following message in my kernel.log: "ACPI: EC: non-query interrupt received, switching to interrupt mode" This apparently prevented sony-laptop to properly restore the brightness level on resume. The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the GPE mode bit, but this is not restored in acpi_ec_resume (the function below it). The patch below fixes this by properly restoring the GPE_MODE bit. Tested and confirmed to work. Signed-off-by: Almer S. Tigelaar <almer@gnome.org> Signed-off-by: Mattia Dongili <malattia@linux.it> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:56:57 UTC
a83021a sony-laptop: SNC input event 38 fix Fixes the "unknown input event 38" messages. ANYBUTTON_RELEASED is now treated the same way as FN_KEY_RELEASED. Signed-off-by: Almer S. Tigelaar <almer@gnome.org> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:56:53 UTC
560e84a sony-laptop: SNC 127 Initialization Fix Fixes additional special key initialization for SNC 127 key events. Verified / tested on a Sony VAIO SR model. Signed-off-by: Almer S. Tigelaar <almer@gnome.org> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:56:53 UTC
226fced sony-laptop: Duplicate SNC 127 Event Fix Fixes a duplicate mapping in the SNC sony_127_events structure. Signed-off-by: Almer S. Tigelaar <almer@gnome.org> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:56:52 UTC
615dfd9 ACPI: prevent processor.max_cstate=0 boot crash As processor.max_cstate is an init-time-only modparam, sanity checking it at init-time is sufficient. http://bugzilla.kernel.org/show_bug.cgi?id=13142 Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 03:21:29 UTC
f461dde ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M Linux tells ICH4 users that they can (manually) invoke "hpet=force" to enable the undocumented ICH-4M HPET. The HPET becomes available for both clocksource and clockevents. But as of ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) the HPET may be used via clocksource for idle accounting, and hpet=force on an ICH4 box hangs boot. It turns out that touching the MMIO HPET withing the ARB_DIS part of C3 will hang the hardware. The fix is to simply move the timer access outside the ARB_DIS region. This is a no-op on modern hardware because ARB_DIS is no longer used. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 24 April 2009, 01:51:51 UTC
fdd8b07 [ARM] 5460/1: Orion: reduce namespace pollution Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 23 April 2009, 22:25:41 UTC
ae1036a [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config Check if we really have Scoop config, otherwice we can get a nice Oops during probe. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 23 April 2009, 22:25:40 UTC
6b35ca0 USB: pwc : do not pass stack allocated buffers to USB core. This is causes problems on platforms that have alignment requirements for DMA transfers. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:31 UTC
ecf85e4 USB: otg: Fix bug on remove path without transceiver In the case where a gadget driver is removed while no transceiver was found at probe time, a bug in otg_put_transceiver() will trigger. Provide symetric calls for otg_get_transceiver() and otg_put_transceiver(), wherever a transceiver was found or not. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:31 UTC
052fbc0 USB: correct error handling in cdc-wdm This patch to cdc-wdm - checks for partial extra descriptors - fixes a leak in the error case of probe - checks for an exact number of endpoints - adds a clarifying comment Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:30 UTC
2400a2b USB: removal of tty->low_latency hack dating back to the old serial code This removes tty->low_latency from all USB serial drivers that push data into the tty layer at hard interrupt context. It's no longer needed and actually harmful. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:29 UTC
212b8f0 USB: serial: sierra driver bug fix for composite interface This patch fixes a problem in sierra_send_setup() function when composite devices are used. One should not be sending ACM commands to interfaces that are OBEX. Doing this causes an apparent failure as the ACM command has to time out before the interface can start being used. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:29 UTC
864e28b USB: gadget: omap_udc uses platform_driver_probe() We now have a more correct solution for shrinking runtime driver footprints than just marking probe() as __init ... use it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:29 UTC
36825a2 USB: ci13xxx_udc: fix build error Fix build error in the MIPS USB IP core family device controller driver. The driver calls udelay() without including linux/delay.h Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:28 UTC
fbfc396 USB: musb: Prevent multiple includes of musb.h Add #ifndef to musb header file to prevent multiple inclusions. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:28 UTC
a8aa401 USB: pass mem_flags to dma_alloc_coherent When I want to use my webcam, I get: vvvvvvv cheese: page allocation failure. order:5, mode:0x8004 Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102 Call Trace: [<ffffffff802c5d8e>] __alloc_pages_internal+0x3fe/0x520 [<ffffffff80210a20>] dma_generic_alloc_coherent+0x90/0x120 [<ffffffffa001c91e>] hcd_buffer_alloc+0xee/0x130 [usbcore] [<ffffffffa000d52d>] usb_buffer_alloc+0x2d/0x40 [usbcore] [<ffffffffa0160e14>] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo] [<ffffffffa0160ff6>] uvc_init_video+0x126/0x400 [uvcvideo] [...] Oddly, I remembered fixing this and putting in __GFP_NOWARN because uvcvideo retries a smaller allocation. However, the allocation function doesn't pass the gfp flags through to dma_alloc_coherent so we still get the warning! Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:28 UTC
82a10a8 USB: g_file_storage: fix use-after-free bug when closing files This patch (as1231) fixes a use-after-free bug in g_file_storage. A device's name may not be available after the device is unregistered, even if the device structure itself is still allocated. Since close_backing_file() prints a LUN's name for debugging, it shouldn't be called after the LUN has been unregistered. That whole area needed to be cleaned up; the backing files were getting closed in a couple of different places. The patch fixes things so that they get closed in just one place, as part of the unbind procedure, immediately before the LUN is unregistered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:28 UTC
c065c60 USB: ehci-sched.c: EHCI SITD scheduling bugfix Without this patch, the driver won't check that the last fully-occupied uframe for a new split transaction was vacant beforehand. This can lead to a situation in which the first 188 bytes of a 192-byte isochronous transfer are scheduled in the same uframe as an existing interrupt transfer. The resulting schedule looks like this: uframe 0: 188-byte isoc-OUT SSPLIT, 8-byte int-IN SSPLIT uframe 1: 4-byte isoc-OUT SSPLIT The SSPLITs are intermingled, causing an error in the downstream hub's TT. If you are having problems with devices or hub ports resetting, or failed interrupt transfers, when you start using a USB audio or video (Isochronous) device, this patch may help. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Kung James <kong1191@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> 23 April 2009, 21:15:28 UTC
37768ad USB: fix mos7840 problem with minor numbers This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is initialised results in all the devices being overlaid in memory (minor = 0 for all instances) Contributed by: Phillip Branch Signed-off-by: Tony Cook <tony-cook@bigpond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:28 UTC
e9b8cff USB: mos7840: add new device id add USB ids for the mos7840 based ATEN International serial devices. Contributed by: Phillip Branch Signed-off-by: Tony Cook <tony-cook@bigpond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:27 UTC
10c966c USB: musb: fix build when !CONFIG_PM Fix this build error when CONFIG_PM is not set: drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:27 UTC
9cceedb USB: musb: Remove my email address from few musb related drivers This email address is going to expire soon and my contribution to musb is next to zero so remove it. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:27 UTC
f23e649 USB: Gadget: MIPS CI13xxx UDC bugfixes Bug Fix: high speed detection in LPM mode Bug Fix: max packet size configuration when switching between HS and FS Signed-off-by: David Lopo <dlopo@chipidea.mips.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:27 UTC
46c6e93 USB: Unusual Device support for Gold MP3 Player Energy Reported by Alessio Treglia on https://bugs.launchpad.net/ubuntu/+source/linux/+bug/125250 User was getting the following errors in dmesg: [ 2158.139386] sd 5:0:0:1: ioctl_internal_command return code = 8000002 [ 2158.139390] : Current: sense key: No Sense [ 2158.139393] Additional sense: No additional sense information Adds unusual device support. modified: drivers/usb/storage/unusual_devs.h Signed-off-by: Chuck Short <zulcss@ubuntu.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:27 UTC
2d93148 USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 23 April 2009, 21:15:26 UTC
b930f96 MAINTAINERS: update IDE entry By a popular demand quilt tree was replaced by a git one. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 April 2009, 20:53:45 UTC
back to top