https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
e64f638 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fix from Dmitry Torokhov: "A small tweak for the Synaptics PS/2 touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add min/max quirk for Lenovo S540 09 June 2015, 22:05:27 UTC
5879ae5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix stack allocation in s390 BPF JIT, from Michael Holzheu. 2) Disable LRO on openvswitch paths, from Jiri Benc. 3) UDP early demux doesn't handle multicast group membership properly, fix from Shawn Bohrer. 4) Fix TX queue hang due to incorrect handling of mixed sized fragments and linearlization in i40e driver, from Anjali Singhai Jain. 5) Cannot use disable_irq() in timer handler of AMD xgbe driver, from Thomas Lendacky. 6) b2net driver improperly assumes pci_alloc_consistent() gives zero'd out memory, use dma_zalloc_coherent(). From Sriharsha Basavapatna. 7) Fix use-after-free in MPLS and ipv6, from Robert Shearman. 8) Missing neif_napi_del() calls in cleanup paths of b44 driver, from Hauke Mehrtens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: replace last open coded skb_orphan_frags with function call net: bcmgenet: power on MII block for all MII modes ipv6: Fix protocol resubmission ipv6: fix possible use after free of dev stats b44: call netif_napi_del() bridge: disable softirqs around br_fdb_update to avoid lockup Revert "bridge: use _bh spinlock variant for br_fdb_update to avoid lockup" mpls: fix possible use after free of device be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent() bridge: use _bh spinlock variant for br_fdb_update to avoid lockup amd-xgbe: Use disable_irq_nosync from within timer function rhashtable: add missing import <linux/export.h> i40e: Make sure to be in VEB mode if SRIOV is enabled at probe i40e: start up in VEPA mode by default i40e/i40evf: Fix mixed size frags and linearization ipv4/udp: Verify multicast group is ours in upd_v4_early_demux() openvswitch: disable LRO s390/bpf: fix bpf frame pointer setup s390/bpf: fix stack allocation 09 June 2015, 00:41:04 UTC
056537c Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull last-minute virtio fix from Michael Tsirkin: "This fixes a minor issue affecting multiqueue virtio net when user keeps changing the number of active queues and CPUs are added and removed by hotplug" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: Clear stale cpumask when setting irq affinity 08 June 2015, 23:26:53 UTC
40b985f Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: "About 10 days worth of small bug fixes, and the (hopefully) final round fixes for from arm-soc land for the -rc cycle. Nothing special to note, but here's a brief summary of fixes by SoC type: - OMAP: small set of misc DT fixes; boot fix for THUMB2 kernel - mediatek: PMIC fixes; DT fix for model name - exynos: wakeup interupt fixes for 3250 - mvebu: revert mbus patch which broke DMA masters * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage ARM: dts: AM35xx: fix system control module clocks arm64: dts: mt8173-evb: fix model name ARM: exynos: Fix wake-up interrupts for Exynos3250 ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 ARM: dts: Fix dm816x to use right compatible flag for MUSB ARM: OMAP3: Fix booting with thumb2 kernel Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window" bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms. ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC soc: mediatek: Add compile dependency to pmic-wrapper soc: mediatek: PMIC wrap: Fix register state machine handling soc: mediatek: PMIC wrap: Fix clock rate handling 08 June 2015, 20:21:58 UTC
bbbf2df net: replace last open coded skb_orphan_frags with function call Commit 70008aa50e92 ("skbuff: convert to skb_orphan_frags") replaced open coded tests of SKBTX_DEV_ZEROCOPY and skb_copy_ubufs with calls to helper function skb_orphan_frags. Apply that to the last remaining open coded site. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 19:15:13 UTC
afe3f90 net: bcmgenet: power on MII block for all MII modes The RGMII block is currently only powered on when using RGMII or RGMII_NO_ID, which is not correct when using the GENET interface in MII or Reverse MII modes. We always need to power on the RGMII interface for this block to properly work, regardless of the MII mode in which we operate. Fixes: aa09677cba423 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 19:13:53 UTC
0243508 ipv6: Fix protocol resubmission UDP encapsulation is broken on IPv6. This is because the logic to resubmit the nexthdr is inverted, checking for a ret value > 0 instead of < 0. Also, the resubmit label is in the wrong position since we already get the nexthdr value when performing decapsulation. In addition the skb pull is no longer necessary either. This changes the return value check to look for < 0, using it for the nexthdr on the next iteration, and moves the resubmit label to the proper location. With these changes the v6 code now matches what we do in the v4 ip input code wrt resubmitting when decapsulating. Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: "Tom Herbert" <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 19:13:17 UTC
27e41fc ipv6: fix possible use after free of dev stats The memory pointed to by idev->stats.icmpv6msgdev, idev->stats.icmpv6dev and idev->stats.ipv6 can each be used in an RCU read context without taking a reference on idev. For example, through IP6_*_STATS_* calls in ip6_rcv. These memory blocks are freed without waiting for an RCU grace period to elapse. This could lead to the memory being written to after it has been freed. Fix this by using call_rcu to free the memory used for stats, as well as idev after an RCU grace period has elapsed. Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 19:12:45 UTC
0a68c6b Merge tag 'omap-for-v4.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge omap fixes for v4.1, urgent fix to avoid potential hardware damage From Tony Lindgren: Omap fixes for the -rc cycle, including a fix for potential hardware breakage on BeagleBones: - BeagleBones don't support RTC-only mode, it can cause hardware damage if system-power-controller is specified without ti,pmic-shutdown-controller - Fix a recent regression to am3517 SoCs caused by the recent clock move that was not noticed until now despite automated boot testing - Fix a regression for n900 touchscreen triggered by recent recent input changes - Fix compatible property for dm816x USB to avoid errors with USB Ethernet - Fix oops for omap3 when built with CONFIG_THUMB2_KERNEL * tag 'omap-for-v4.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage ARM: dts: AM35xx: fix system control module clocks ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 ARM: dts: Fix dm816x to use right compatible flag for MUSB ARM: OMAP3: Fix booting with thumb2 kernel 08 June 2015, 17:32:55 UTC
7f2ca8b Input: synaptics - add min/max quirk for Lenovo S540 https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Cc: stable@vger.kernel.org Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 08 June 2015, 17:19:08 UTC
181e505 Merge git://git.infradead.org/intel-iommu Pull Intel IOMMU fix from David Woodhouse: "This fixes an oops when attempting to enable 1:1 passthrough mode for devices on which VT-d translation was disabled anyway. It's actually a long-standing bug but recent changes (commit 18436afdc11a: "iommu/vt-d: Allow RMRR on graphics devices too") have made it much easier to trigger with 'iommu=pt intel_iommu=igfx_off' on the command line" * git://git.infradead.org/intel-iommu: iommu/vt-d: Fix passthrough mode with translation-disabled devices 08 June 2015, 16:37:23 UTC
86579aa Merge branch 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Two driver fixes. One is for an ahci_mvebu controller config bug and the other fixes pata_octeon_cf build issue" * 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: pata_octeon_cf: fix broken build ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting 08 June 2015, 15:47:08 UTC
4710f2f pata_octeon_cf: fix broken build MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the build. Fix that. Cc: stable@vger.kernel.org Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tejun Heo <tj@kernel.org> 08 June 2015, 09:03:04 UTC
d4a4f75 Linux 4.1-rc7 08 June 2015, 03:23:50 UTC
1489bde b44: call netif_napi_del() When the driver gets unregistered a call to netif_napi_del() was missing, this all was also missing in the error paths of b44_init_one(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 02:45:34 UTC
c4c832f bridge: disable softirqs around br_fdb_update to avoid lockup br_fdb_update() can be called in process context in the following way: br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set) so we need to disable softirqs because there are softirq users of the hash_lock. One easy way to reproduce this is to modify the bridge utility to set NTF_USE, enable stp and then set maxageing to a low value so br_fdb_cleanup() is called frequently and then just add new entries in a loop. This happens because br_fdb_cleanup() is called from timer/softirq context. The spin locks in br_fdb_update were _bh before commit f8ae737deea1 ("[BRIDGE]: forwarding remove unneeded preempt and bh diasables") and at the time that commit was correct because br_fdb_update() couldn't be called from process context, but that changed after commit: 292d1398983f ("bridge: add NTF_USE support") Using local_bh_disable/enable around br_fdb_update() allows us to keep using the spin_lock/unlock in br_fdb_update for the fast-path. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 292d1398983f ("bridge: add NTF_USE support") Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 02:44:13 UTC
7ff46e7 Revert "bridge: use _bh spinlock variant for br_fdb_update to avoid lockup" This reverts commit 1d7c49037b12016e7056b9f2c990380e2187e766. Nikolay Aleksandrov has a better version of this fix. Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 02:43:47 UTC
25cc8f0 mpls: fix possible use after free of device The mpls device is used in an RCU read context without a lock being held. As the memory is freed without waiting for the RCU grace period to elapse, the freed memory could still be in use. Address this by using kfree_rcu to free the memory for the mpls device after the RCU grace period has elapsed. Fixes: 03c57747a702 ("mpls: Per-device MPLS state") Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 June 2015, 02:37:27 UTC
866e644 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "Eight fixes across arch/mips. Nothing stands particuarly out nor is complicated but fixes keep coming in at a higher than comfortable rate" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: KVM: Do not sign extend on unsigned MMIO load MIPS: BPF: Fix stack pointer allocation MIPS: Loongson-3: Fix a cpu-hotplug issue in loongson3_ipi_interrupt() MIPS: Fix enabling of DEBUG_STACKOVERFLOW MIPS: c-r4k: Fix typo in probe_scache() MIPS: Avoid an FPE exception in FCSR mask probing MIPS: ath79: Add a missing new line in log message MIPS: ralink: Fix clearing the illegal access interrupt 07 June 2015, 23:56:10 UTC
e51000d be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent() There are several places in the driver (all in control paths) where coherent dma memory is being allocated using either dma_alloc_coherent() or the deprecated pci_alloc_consistent(). All these calls should be changed to use dma_zalloc_coherent() to avoid uninitialized fields in data structures backed by this memory. Reported-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2015, 22:35:11 UTC
1d7c490 bridge: use _bh spinlock variant for br_fdb_update to avoid lockup br_fdb_update() can be called in process context in the following way: br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set) so we need to use spin_lock_bh because there are softirq users of the hash_lock. One easy way to reproduce this is to modify the bridge utility to set NTF_USE, enable stp and then set maxageing to a low value so br_fdb_cleanup() is called frequently and then just add new entries in a loop. This happens because br_fdb_cleanup() is called from timer/softirq context. These locks were _bh before commit f8ae737deea1 ("[BRIDGE]: forwarding remove unneeded preempt and bh diasables") and at the time that commit was correct because br_fdb_update() couldn't be called from process context, but that changed after commit: 292d1398983f ("bridge: add NTF_USE support") Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 292d1398983f ("bridge: add NTF_USE support") Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2015, 22:24:54 UTC
078b29d amd-xgbe: Use disable_irq_nosync from within timer function Since the Tx timer function runs in softirq context the driver needs to call disable_irq_nosync instead of a disable_irq. Reported-by: Josh Stone <jistone@redhat.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2015, 07:21:12 UTC
6d79541 rhashtable: add missing import <linux/export.h> rhashtable uses EXPORT_SYMBOL_GPL() without importing linux/export.h directly it is only imported indirectly through some other includes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2015, 07:10:15 UTC
37ef164 Merge tag 'driver-core-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two fixes for the driver core that resolve some reported issues. One is a regression from 4.0, the other a fixes a reported oops that has been there since 3.19. Both have been in linux-next for a while with no problems" * tag 'driver-core-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base: cacheinfo: handle absence of caches drivers: of/base: move of_init to driver_init 07 June 2015, 05:37:45 UTC
eadc21f Merge tag 'staging-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO fixes from Greg KH: "Here are some IIO driver fixes to resolve reported issues, some ozwpan fixes for some reported CVE problems, and a rtl8712 driver fix for a reported regression. All have been in linux-next successfully" * tag 'staging-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8712: fix stack dump ozwpan: unchecked signed subtraction leads to DoS ozwpan: divide-by-zero leading to panic ozwpan: Use unsigned ints to prevent heap overflow ozwpan: Use proper check to prevent heap overflow iio: adc: twl6030-gpadc: Fix modalias iio: adis16400: Fix burst transfer for adis16448 iio: adis16400: Fix burst mode iio: adis16400: Compute the scan mask from channel indices iio: adis16400: Use != channel indices for the two voltage channels iio: adis16400: Report pressure channel scale 07 June 2015, 05:33:08 UTC
b334b77 Merge tag 'tty-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a few TTY and Serial driver fixes for reported regressions and crashes. All of these have been in linux-next with no reported problems" * tag 'tty-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: Fix auditing support for cannonical mode serial: 8250_omap: provide complete custom startup & shutdown callbacks n_tty: Fix calculation of size in canon_copy_from_read_buf serial: imx: Fix DMA handling for IDLE condition aborts serial/amba-pl011: Unconditionally poll for FIFO space before each TX char 07 June 2015, 05:14:23 UTC
e900f2c Merge tag 'usb-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and PHY driver fixes from Greg KH: "Here are some USB and PHY driver fixes that resolve some reported regressions. Also in here are some new device ids. All of the details are in the shortlog and these patches have been in linux-next with no problems" * tag 'usb-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle usb: renesas_usbhs: Don't disable the pipe if Control write status stage usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_pop usb: gadget: f_fs: fix check in read operation usb: musb: fix order of conditions for assigning end point operations usb: gadget: f_uac1: check return code from config_ep_by_speed usb: gadget: ffs: fix: Always call ffs_closed() in ffs_data_clear() usb: gadget: g_ffs: Fix counting of missing_functions usb: s3c2410_udc: correct reversed pullup logic usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros usb: phy: tahvo: Pass the IRQF_ONESHOT flag usb: phy: ab8500-usb: Pass the IRQF_ONESHOT flag usb: renesas_usbhs: Revise the binding document about the dma-names usb: host: xhci: add mutex for non-thread-safe data usb: make module xhci_hcd removable USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board usb: gadget: f_midi: fix segfault when reading empty id phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK value phy: omap-usb2: invoke pm_runtime_disable on error path phy: fix Kconfig dependencies ... 07 June 2015, 05:06:53 UTC
be19c4a Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree fix from Grant Likely: "Stupid typo fix for v4.1. One of the IS_ENABLED() macro calls forgot the CONFIG_ prefix. Only affects a tiny number of platforms, but still..." * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/dynamic: Fix test for PPC_PSERIES 07 June 2015, 04:43:29 UTC
4b17069 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "i915 has a bunch of fixes, and Russell found a bug in sysfs writing handling that results in userspace getting stuck" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fix writing to /sys/class/drm/*/status drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code drm/i915: Include G4X/VLV/CHV in self refresh status drm/i915: Initialize HWS page address after GPU reset drm/i915: Don't skip request retirement if the active list is empty drm/i915/hsw: Fix workaround for server AUX channel clock divisor 06 June 2015, 16:15:14 UTC
f46c581 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a couple touchpad drivers fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - do not reduce trackpoint speed by half Input: elantech - add new icbody type Input: elantech - fix detection of touchpads where the revision matches a known rate 06 June 2015, 16:08:23 UTC
77493bd Merge branch 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "Tiny little fix which just converts an function to be static. Really tiny" * 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: do not export map_single function 06 June 2015, 16:06:20 UTC
7dedcca Merge branch 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull iBFT fix from Konrad Rzeszutek Wilk: "One single fix from Chris to workaround UEFI platforms failing with iSCSI IBFT" * 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: filter null v4-mapped v6 addresses 06 June 2015, 16:03:54 UTC
ed9244e MIPS: KVM: Do not sign extend on unsigned MMIO load Fix possible unintended sign extension in unsigned MMIO loads by casting to uint16_t in the case of mmio_needed != 2. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Tested-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9985/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 June 2015, 08:21:10 UTC
8833bc3 MIPS: BPF: Fix stack pointer allocation Fix stack pointer offset which could potentially corrupt argument registers in the previous frame. The calculated offset reflects the size of all the registers we need to preserve so there is no need for this erroneous subtraction. [ralf@linux-mips.org: Fixed conflict due to only applying this fix part of the entire series as part of 4.1 fixes.] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/10527/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 June 2015, 08:21:10 UTC
e1fb96e MIPS: Loongson-3: Fix a cpu-hotplug issue in loongson3_ipi_interrupt() setup_per_cpu_areas() only setup __per_cpu_offset[] for each possible cpu, but loongson_sysconf.nr_cpus can be greater than possible cpus (due to reserved_cpus_mask). So in loongson3_ipi_interrupt(), percpu access will touch the original varible in .data..percpu section which has been freed. Without this patch, cpu-hotplug will cause memery corruption. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/10524/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 June 2015, 08:21:10 UTC
5f35b9c MIPS: Fix enabling of DEBUG_STACKOVERFLOW Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Adam Jiang <jiang.adam@gmail.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 2.6.37+ Patchwork: http://patchwork.linux-mips.org/patch/10531/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 June 2015, 08:21:09 UTC
755af33 MIPS: c-r4k: Fix typo in probe_scache() Fixes a typo in arch/mips/mm/c-r4k.c's probe_scache(). Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 June 2015, 08:21:09 UTC
c6271b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-04 This series contains updates to i40e and i40evf. Anjali provides three fixes, first to resolve a Tx queue hang if mixed size frags are passed to the driver while using TSO. There was a corner case where we needed to linearize but we were not. Next fixes a bug in the default configuration which prevented a software bridge loaded on the PF interface from working correctly because broadcast packets are incorrectly looped back. Lastly fixes an NPAR bug when SRIOV is enabled, where we need to be in VEB mode, not VEPA mode at probe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2015, 04:15:50 UTC
e6050b6 iscsi_ibft: filter null v4-mapped v6 addresses I've had reports of UEFI platforms failing iSCSI boot in various configurations, that ended up being caused by network initialization scripts getting tripped up by unexpected null addresses (0.0.0.0) being reported for gateways, dhcp servers, and dns servers. The tianocore EDK2 iSCSI driver generates an iBFT table that always uses IPv4-mapped IPv6 addresses for the NIC structure fields. This results in values that are "not present or not specified" being reported as ::ffff:0.0.0.0 rather than all zeros as specified. The iscsi_ibft module filters unspecified fields from the iBFT from sysfs, preventing userspace from using invalid values and making it easy to check for the presence of a value. This currently fails in regard to these mapped null addresses. In order to remain consistent with how the iBFT information is exposed, we should accommodate the behavior of the tianocore iSCSI driver as it's already in the wild in a large number of servers. Tested under qemu using an OVMF build of tianocore EDK2. Signed-off-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 June 2015, 01:07:02 UTC
023600f swiotlb: do not export map_single function The map_single() function is not defined as static, even though it doesn't seem to be used anywhere else in the kernel. Make it static to avoid namespace pollution since this is a rather generic symbol. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 05 June 2015, 22:46:30 UTC
38d8571 drm: fix writing to /sys/class/drm/*/status Writing to a file is supposed to return the number of bytes written. Returning zero unfortunately causes bash to constantly spin trying to write to the sysfs file, to such an extent that even ^c and ^z have no effect. The only way out of that is to kill the shell and log back in. This isn't nice behaviour. Fix it by returning the number of characters written to sysfs files. [airlied: used suggestion from Al Viro] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> 05 June 2015, 22:27:30 UTC
a9592f1 Merge tag 'drm-intel-fixes-2015-06-05' of git://anongit.freedesktop.org/drm-intel into drm-fixes bunch of i915 fixes. * tag 'drm-intel-fixes-2015-06-05' of git://anongit.freedesktop.org/drm-intel: drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code drm/i915: Include G4X/VLV/CHV in self refresh status drm/i915: Initialize HWS page address after GPU reset drm/i915: Don't skip request retirement if the active list is empty drm/i915/hsw: Fix workaround for server AUX channel clock divisor 05 June 2015, 21:14:13 UTC
456fdb2 Merge tag 'pci-v4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Resource management - Fix IOV sorting by alignment (Wei Yang) - Preserve resource size during alignment reordering (Yinghai Lu) Miscellaneous - MAINTAINERS: Add Pratyush for SPEAr13xx and DesignWare PCIe (Pratyush Anand)" * tag 'pci-v4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Preserve resource size during alignment reordering PCI: Fix IOV resource sorting by alignment requirement MAINTAINERS: Add Pratyush Anand as SPEAr13xx and DesignWare PCIe maintainer 05 June 2015, 17:22:06 UTC
6e6f9e0 Merge tag 'sound-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "It was a fairly calm week; here you can find only a few trivial quirks and fixes for USB and HD-audio. All changes are pretty device specific" * tag 'sound-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+) ALSA: usb-audio: add MAYA44 USB+ mixer control names ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420 ALSA: hda - Fix jack detection at resume with VT codecs ALSA: usb-audio: don't try to get Outlaw RR2150 sample rate ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion ALSA: hda/realtek - Suooprt Dell headset mode for ALC256 05 June 2015, 17:16:52 UTC
44953af Merge tag 'iommu-fixes-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: "Only one patch: - Revert "iommu/amd: Don't allocate with __GFP_ZERO in alloc_coherent". This patch caused problems with some drivers, so it is better to revert it now until the drivers have been fixed" * tag 'iommu-fixes-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/amd: Don't allocate with __GFP_ZERO in alloc_coherent" 05 June 2015, 17:14:51 UTC
51d0f0c Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - early_idt_handlers[] fix that fixes the build with bleeding edge tooling - build warning fix on GCC 5.1 - vm86 fix plus self-test to make it harder to break it again" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode x86/boot: Add CONFIG_PARAVIRT_SPINLOCKS quirk to arch/x86/boot/compressed/misc.h x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode 05 June 2015, 17:03:48 UTC
a0e9c6e Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "The biggest chunk of the changes are two regression fixes: a HT workaround fix and an event-group scheduling fix. It's been verified with 5 days of fuzzer testing. Other fixes: - eBPF fix - a BIOS breakage detection fix - PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/pt: Fix a refactoring bug perf/x86: Tweak broken BIOS rules during check_hw_exists() perf/x86/intel/pt: Untangle pt_buffer_reset_markers() perf: Disallow sparse AUX allocations for non-SG PMUs in overwrite mode perf/x86: Improve HT workaround GP counter constraint perf/x86: Fix event/group validation perf: Fix race in BPF program unregister 05 June 2015, 17:00:53 UTC
5943334 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just two small fixes: one radeon, one amdkfd" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdkfd: fix topology bug with capability attr. drm/radeon: use proper ACR regisiter for DCE3.2 05 June 2015, 16:58:36 UTC
dc2c6eb Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bug fixes from Wolfram Sang: "Two small bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: s3c2410: fix oops in suspend callback for non-dt platforms i2c: hix5hd2: Fix modalias to make module auto-loading work 05 June 2015, 16:54:43 UTC
9d08203 Merge tag 'usb-serial-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.1-rc7 Here are a couple of new device ids. Signed-off-by: Johan Hovold <johan@kernel.org> 05 June 2015, 14:19:45 UTC
088df2c Input: alps - do not reduce trackpoint speed by half On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically only in the 0-1 range dividing this by 2 results in a range of 0-0. And even for v7 devices where this does not lead to making the trackstick entirely unusable, it makes it twice as slow as before we added v7 support and were using the ps/2 mouse emulation of the dual point setup. If some kind of generic slowdown is actually necessary for some devices, then that belongs in userspace, not in the kernel. Cc: stable@vger.kernel.org Reported-and-tested-by: Rico Moorman <rico.moorman@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 05 June 2015, 05:34:40 UTC
692dd19 Input: elantech - add new icbody type This adds new icbody type to the list recognized by Elantech PS/2 driver. Cc: stable@vger.kernel.org Signed-off-by: Sam Hung <sam.hung@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 05 June 2015, 05:34:39 UTC
fa11cb3 i40e: Make sure to be in VEB mode if SRIOV is enabled at probe If SRIOV is enabled we need to be in VEB mode not VEPA mode at probe. This fixes an NPAR bug when SRIOV is enabled in the BIOS. Change-ID: Ibf006abafd9a0ca3698ec24848cd771cf345cbbc Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 05 June 2015, 03:14:23 UTC
fc60861 i40e: start up in VEPA mode by default The patch fixes a bug in the default configuration which prevented a software bridge loaded on the PF interface from working correctly because broadcast packets are incorrectly looped back. Fix the general case, by loading the driver in VEPA mode Until a VF or VMDq VSI is added. This way loopback on the Main VSI is turned off until needed and can resolve the issue of unnecessary reflection for users that do not have VF or VMDq VSIs setup. The driver must now coordinate the loopback setting for the Flow Director (FDIR) VSI to make sure it is in sync with the current VEB or VEPA mode setting. The user can still switch bridge modes from the bridge commands and choose to be in VEPA mode with VF VSIs. Because of hardware requirements, the call to switch to VEB mode when no VF/VMDqs are present will be rejected. NOTE: This patch uses BIT_ULL as that is preferred going forward, a followup patch in the lower priority queue to net-next will fix up the remaining 1 << usages. Change-ID: Ib121ddb18fe4b3c4f52e9deda6fcbeb9105683d1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 05 June 2015, 03:10:30 UTC
3052083 i40e/i40evf: Fix mixed size frags and linearization This patch fixes a bug where the i40e Tx queue will hang if this skb is passed to the driver. With mixed size fragments while using TSO there was a corner case where we needed to linearize but we were not. This was seen with iSCSI traffic and could be reproduced with a frag list that looks like this: num_frags = 17, gso_segs = 17, hdr_len = 66, skb_shinfo(skb)->gso_size = 1448 size = 3002, j = 1, frag_size = 2936, num_frags = 17 size = 4268, j = 1, frag_size = 4096, num_frags = 16 size = 5534, j = 1, frag_size = 4096, num_frags = 15 size = 5352, j = 1, frag_size = 4096, num_frags = 14 size = 5170, j = 1, frag_size = 4096, num_frags = 13 size = 3468, j = 1, frag_size = 2576, num_frags = 12 size = 750, j = 1, frag_size = 112, num_frags = 11 size = 862, j = 2, frag_size = 112, num_frags = 10 size = 974, j = 3, frag_size = 112, num_frags = 9 size = 1126, j = 4, frag_size = 152, num_frags = 8 size = 1330, j = 5, frag_size = 204, num_frags = 7 size = 1534, j = 6, frag_size = 204, num_frags = 6 size = 356, j = 1, frag_size = 204, num_frags = 5 size = 560, j = 2, frag_size = 204, num_frags = 4 size = 764, j = 3, frag_size = 204, num_frags = 3 size = 968, j = 4, frag_size = 204, num_frags = 2 size = 1140, j = 5, frag_size = 172, num_frags = 1 result: linearize = 0, j = 6 Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 05 June 2015, 03:06:06 UTC
f76502a of/dynamic: Fix test for PPC_PSERIES "IS_ENABLED(PPC_PSERIES)" always evaluates to false, as IS_ENABLED() is supposed to be used with the full Kconfig symbol name, including the "CONFIG_" prefix. Add the missing "CONFIG_" prefix to fix this. Fixes: a25095d451ece23b ("of: Move dynamic node fixups out of powerpc and into common code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org #+3.17 Signed-off-by: Grant Likely <grant.likely@linaro.org> 05 June 2015, 01:39:28 UTC
9b7b819 compat: cleanup coding in compat_get_bitmap() and compat_put_bitmap() In the functions compat_get_bitmap() and compat_put_bitmap() the variable nr_compat_longs stores how many compat_ulong_t words should be copied in a loop. The copy loop itself is this: if (nr_compat_longs-- > 0) { if (__get_user(um, umask)) return -EFAULT; } else { um = 0; } Since nr_compat_longs gets unconditionally decremented in each loop and since it's type is unsigned this could theoretically lead to out of bounds accesses to userspace if nr_compat_longs wraps around to (unsigned)(-1). Although the callers currently do not trigger out-of-bounds accesses, we should better implement the loop in a safe way to completely avoid such warp-arounds. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> 04 June 2015, 21:57:18 UTC
df72d58 USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle Added the USB serial device ID for the HubZ dual ZigBee and Z-Wave radio dongle. Signed-off-by: John D. Blair <johnb@candicontrols.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> 04 June 2015, 21:22:16 UTC
ff25ea8 Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "We have two small fixes: - pl330 termination hang fix by Krzysztof - hsu memory leak fix by Peter" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: hsu: Fix memory leak when stopping a running transfer dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards 04 June 2015, 17:19:34 UTC
b44a2b5 perf/x86/intel/pt: Fix a refactoring bug Commit 066450be41 ("perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init()") changed attribute initialization so that only the first attribute gets initialized using sysfs_attr_init(), which upsets lockdep. This patch fixes the glitch so that all allocated attributes are properly initialized thus fixing the lockdep warning reported by Tvrtko and Imre. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reported-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: <linux-kernel@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> 04 June 2015, 14:07:51 UTC
210d150 virtio_pci: Clear stale cpumask when setting irq affinity The cpumask vp_dev->msix_affinity_masks[info->msix_vector] may contain staled information when vp_set_vq_affinity() gets called, so clear it before setting the new cpu bit mask. Cc: stable@vger.kernel.org Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 04 June 2015, 12:47:49 UTC
4f47c99 drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code commit 65ca7514e21adbee25b8175fc909759c735d00ff Author: Damien Lespiau <damien.lespiau@intel.com> Date: Mon Feb 9 19:33:22 2015 +0000 drm/i915/skl: Implement WaBarrierPerformanceFixDisable got misapplied and the code landed in chv_init_workarounds() instead of the intended skl_init_workarounds(). Move it over to the right place. Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 04 June 2015, 11:15:45 UTC
77b6455 drm/i915: Include G4X/VLV/CHV in self refresh status Add all missing platforms handled by intel_set_memory_cxsr() to the i915_sr_status debugfs entry. v2: Add G4X too. (Ville) Clarify the change also affects CHV. (Ander) References: https://bugs.freedesktop.org/show_bug.cgi?id=89792 Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 04 June 2015, 08:19:38 UTC
2e5356d drm/i915: Initialize HWS page address after GPU reset After GPU reset, HW is losing the address of HWS page in the register. The page itself is valid except that HW is not aware of its location. [ 64.368623] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 [ 64.368655] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 [ 64.368681] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 [ 64.368704] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 This patch reloads this value into the register during ring init. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 04 June 2015, 08:10:21 UTC
6e54030 ipv4/udp: Verify multicast group is ours in upd_v4_early_demux() 421b3885bf6d56391297844f43fb7154a6396e12 "udp: ipv4: Add udp early demux" introduced a regression that allowed sockets bound to INADDR_ANY to receive packets from multicast groups that the socket had not joined. For example a socket that had joined 224.168.2.9 could also receive packets from 225.168.2.9 despite not having joined that group if ip_early_demux is enabled. Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify that the multicast packet is indeed ours. Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2015, 07:46:26 UTC
640b2b1 openvswitch: disable LRO Currently, openvswitch tries to disable LRO from the user space. This does not work correctly when the device added is a vlan interface, though. Instead of dealing with possibly complex stacked cross name space relations in the user space, do the same as bridging does and call dev_disable_lro in the kernel. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Flavio Leitner <fbl@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2015, 02:39:35 UTC
88aeca1 s390/bpf: fix bpf frame pointer setup Currently the bpf frame pointer is set to the old r15. This is wrong because of packed stack. Fix this and adjust the frame pointer to respect packed stack. This now generates a prolog like the following: 3ff8001c3fa: eb67f0480024 stmg %r6,%r7,72(%r15) 3ff8001c400: ebcff0780024 stmg %r12,%r15,120(%r15) 3ff8001c406: b904001f lgr %r1,%r15 <- load backchain 3ff8001c40a: 41d0f048 la %r13,72(%r15) <- load adjusted bfp 3ff8001c40e: a7fbfd98 aghi %r15,-616 3ff8001c412: e310f0980024 stg %r1,152(%r15) <- save backchain Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2015, 02:31:39 UTC
bbac1c9 s390/bpf: fix stack allocation On s390x we have to provide 160 bytes stack space before we can call the next function. From the 160 bytes that we got from the previous function we only use 11 * 8 bytes and have 160 - 11 * 8 bytes left. Currently for BPF we allocate additional 160 - 11 * 8 bytes for the next function. This is wrong because then the next function only gets: (160 - 11 * 8) + (160 - 11 * 8) = 2 * 72 = 144 bytes Fix this and allocate enough memory for the next function. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2015, 02:31:39 UTC
e08f28f Merge tag 'drm-amdkfd-fixes-2015-06-03' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes One minor fix for last -rc of 4.1. The fix moves the update of an attribute in topology to *after* it is actually initialized. * tag 'drm-amdkfd-fixes-2015-06-03' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: fix topology bug with capability attr. 04 June 2015, 02:29:04 UTC
0546b72 Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes One more small r7xx audio regression fix for 4.1 * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: use proper ACR regisiter for DCE3.2 04 June 2015, 02:28:41 UTC
8a7deb3 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block layer fixes from Jens Axboe: "Sending this off now, as I'm not aware of other current bugs, nor do I expect further fixes before 4.1 final. This contains two fixes: - a fix for a bdi unregister warning that gets spewed on md, due to a regression introduced earlier in this cycle. From Neil Brown. - a fix for a compile warning for NVMe on 32-bit platforms, also a regression introduced in this cycle. From Arnd Bergmann" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: fix type warning on 32-bit block: discard bdi_unregister() in favour of bdi_destroy() 03 June 2015, 23:35:00 UTC
08602d7 MAINTAINERS - remove OSDL reference OSDL has been gone for many years, looks like there still was one reference to it. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 June 2015, 23:34:21 UTC
826f5de drm/amdkfd: fix topology bug with capability attr. This patch fixes a bug where the number of watch points was shown before it was actually calculated Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> 03 June 2015, 18:45:54 UTC
226a07e lib: Clarify the return value of strnlen_user() strnlen_user() can return a number in a range 0 to count + sizeof(unsigned long) - 1. Clarify the comment at the top of the function so that users don't think the function returns at most count+1. Signed-off-by: Jan Kara <jack@suse.cz> [ Also added commentary about preferably not using this function ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 June 2015, 15:00:22 UTC
ea114fc ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+) The driver worked around an error in the MAYA44 USB(+)'s mixer unit descriptor by aborting before parsing the missing field. However, aborting parsing too early prevented parsing of the other units connected to this unit, so the capture mixer controls would be missing. Fix this by moving the check for this descriptor error after the parsing of the unit's input pins. Reported-by: nightmixes <nightmixes@gmail.com> Tested-by: nightmixes <nightmixes@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2015, 09:58:15 UTC
044bddb ALSA: usb-audio: add MAYA44 USB+ mixer control names Add mixer control names for the ESI Maya44 USB+ (which appears to be identical width the AudioTrak Maya44 USB). Reported-by: nightmixes <nightmixes@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2015, 09:57:51 UTC
90b712d MIPS: Avoid an FPE exception in FCSR mask probing Use the default FCSR value in mask probing, avoiding an FPE exception where reset has left any exception enable and their corresponding cause bits set and the register is then rewritten with these bits active. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 03 June 2015, 07:50:29 UTC
8cd9234 Merge tag 'please-pull-rusty' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 fix from Tony Luck: "Fix some build warnings for ia64 - cpu_callin_map doesn't need to be volatile" * tag 'please-pull-rusty' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64: make cpu_callin_map non-volatile. 02 June 2015, 17:58:34 UTC
b5d724b ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420 Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to make the sound working like other Aspire models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 June 2015, 17:57:08 UTC
5f0ee9d Input: elantech - fix detection of touchpads where the revision matches a known rate Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Cc: stable@vger.kernel.org Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 02 June 2015, 17:43:07 UTC
161f873 vfs: read file_handle only once in handle_to_path We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2015, 17:29:07 UTC
f18c34e lib: Fix strnlen_user() to not touch memory after specified maximum If the specified maximum length of the string is a multiple of unsigned long, we would load one long behind the specified maximum. If that happens to be in a next page, we can hit a page fault although we were not expected to. Fix the off-by-one bug in the test whether we are at the end of the specified range. Signed-off-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2015, 17:28:52 UTC
5eda786 ia64: make cpu_callin_map non-volatile. cpumask_test_cpu() doesn't take volatile, unlike the obsoleted cpu_isset. The only place ia64 really cares is the spin waiting for a bit; udelay() is probably a barrier but insert barrier() to be sure. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Luck <tony.luck@intel.com> 02 June 2015, 17:07:03 UTC
a26484b MIPS: ath79: Add a missing new line in log message The memory setup log is missing a new line. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9771/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 02 June 2015, 14:07:31 UTC
4297708 dmaengine: hsu: Fix memory leak when stopping a running transfer The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [andy: fix the typo to prevent a compilation error] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 02 June 2015, 13:03:08 UTC
425be56 x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers The early_idt_handlers asm code generates an array of entry points spaced nine bytes apart. It's not really clear from that code or from the places that reference it what's going on, and the code only works in the first place because GAS never generates two-byte JMP instructions when jumping to global labels. Clean up the code to generate the correct array stride (member size) explicitly. This should be considerably more robust against screw-ups, as GAS will warn if a .fill directive has a negative count. Using '. =' to advance would have been even more robust (it would generate an actual error if it tried to move backwards), but it would pad with nulls, confusing anyone who tries to disassemble the code. The new scheme should be much clearer to future readers. While we're at it, improve the comments and rename the array and common code. Binutils may start relaxing jumps to non-weak labels. If so, this change will fix our build, and we may need to backport this change. Before, on x86_64: 0000000000000000 <early_idt_handlers>: 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9> 5: R_X86_64_PC32 early_idt_handler-0x4 ... 48: 66 90 xchg %ax,%ax 4a: 6a 08 pushq $0x8 4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51> 4d: R_X86_64_PC32 early_idt_handler-0x4 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: e9 00 00 00 00 jmpq 120 <early_idt_handler> 11c: R_X86_64_PC32 early_idt_handler-0x4 After: 0000000000000000 <early_idt_handler_array>: 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common> ... 48: 6a 08 pushq $0x8 4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common> 4f: cc int3 50: cc int3 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: eb 03 jmp 120 <early_idt_handler_common> 11d: cc int3 11e: cc int3 11f: cc int3 Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Binutils <binutils@sourceware.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 June 2015, 07:39:40 UTC
2d0ec7a Revert "iommu/amd: Don't allocate with __GFP_ZERO in alloc_coherent" This reverts commit 5fc872c7323534e8f7dc21bab635e7a9b9659e07. The DMA-API does not strictly require that the memory returned by dma_alloc_coherent is zeroed out. For that another function (dma_zalloc_coherent) should be used. But all other x86 DMA-API implementation I checked zero out the memory, so that some drivers rely on it and break when it is not. It seems the (driver-)world is not yet ready for this change, so revert it. Signed-off-by: Joerg Roedel <jroedel@suse.de> 02 June 2015, 06:46:32 UTC
c46a024 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander Duyck and Steffen Klassert. 2) Revert ethtool PHY query change, it wasn't correct. The PHY address selected by the driver running the PHY to MAC connection decides what PHY address GET ethtool operations return information from. 3) Fix handling of sequence number bits for encryption IV generation in ESP driver, from Herbert Xu. 4) UDP can return -EAGAIN when we hit a bad checksum on receive, even when there are other packets in the receive queue which is wrong. Just respect the error returned from the generic socket recv datagram helper. From Eric Dumazet. 5) Fix BNA driver firmware loading on big-endian systems, from Ivan Vecera. 6) Fix regression in that we were inheriting the congestion control of the listening socket for new connections, the intended behavior always was to use the default in this case. From Neal Cardwell. 7) Fix NULL deref in brcmfmac driver, from Arend van Spriel. 8) OTP parsing fix in iwlwifi from Liad Kaufman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) vti6: Add pmtu handling to vti6_xmit. Revert "net: core: 'ethtool' issue with querying phy settings" bnx2x: Move statistics implementation into semaphores xen: netback: read hotplug script once at start of day. xen: netback: fix printf format string warning Revert "netfilter: ensure number of counters is >0 in do_replace()" net: dsa: Properly propagate errors from dsa_switch_setup_one tcp: fix child sockets to use system default congestion control if not set udp: fix behavior of wrong checksums sfc: free multiple Rx buffers when required bna: fix soft lock-up during firmware initialization failure bna: remove unreasonable iocpf timer start bna: fix firmware loading on big-endian machines bridge: fix br_multicast_query_expired() bug via-rhine: Resigning as maintainer brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails mac80211: Fix mac80211.h docbook comments iwlwifi: nvm: fix otp parsing in 8000 hw family iwlwifi: pcie: fix tracking of cmd_in_flight ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call ... 02 June 2015, 03:51:18 UTC
2459c60 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull Sparc fixes from David Miller: 1) Setup the core/threads/sockets bitmaps correctly so that 'lscpus' and friends operate properly. Frtom Chris Hyser. 2) The bit that normally means "Cached Virtually" on sun4v systems, actually changes meaning in M7 and later chips. Fix from Khalid Aziz. 3) One some PCI-E systems we need to probe different OF properties to fill in the PCI slot information properly, from Eric Snowberg. 4) Kill an extraneous memset after kzalloc(), from Christophe Jaillet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE sparc64: pci slots information is not populated in sysfs sparc: kernel: GRPCI2: Remove a useless memset sparc64: Setup sysfs to mark LDOM sockets, cores and threads correctly 02 June 2015, 03:44:51 UTC
091f0a7 drm/radeon: use proper ACR regisiter for DCE3.2 Using the DCE2 one by accident afer the audio rework. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=90777 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 02 June 2015, 03:16:22 UTC
fec345b Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fix from Michael Tsirkin: "Last-minute virtio fix for 4.1 This tweaks an exported user-space header to fix build breakage for userspace using it" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: include/uapi/linux/virtio_balloon.h: include linux/virtio_types.h 02 June 2015, 01:49:45 UTC
e453581 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fix for net The following patch reverts the ebtables chunk that enforces counters that was introduced in the recently applied d26e2c9ffa38 ('Revert "netfilter: ensure number of counters is >0 in do_replace()"') since this breaks ebtables. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 23:56:43 UTC
cd842a6 Merge tag 'wireless-drivers-for-davem-2015-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix OTP parsing 8260 * fix powersave handling for 8260 brcmfmac: * fix null pointer crash ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 23:06:29 UTC
ccd740c vti6: Add pmtu handling to vti6_xmit. We currently rely on the PMTU discovery of xfrm. However if a packet is localy sent, the PMTU mechanism of xfrm tries to to local socket notification what might not work for applications like ping that don't check for this. So add pmtu handling to vti6_xmit to report MTU changes immediately. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 23:03:43 UTC
552bc94 PCI: Preserve resource size during alignment reordering In d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning"), we store additional alignment in realloc_head and take this into consideration for assignment. In __assign_resources_sorted(), we changed dev_res->res->start, then used resource_start() (which depends on res->start), so the recomputed res->end was completely bogus. Even if we'd had the correct size, the end would have been off by one. Preserve the resource size when we adjust its alignment. [bhelgaas: changelog] Fixes: d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> 01 June 2015, 22:56:32 UTC
18ec898 Revert "net: core: 'ethtool' issue with querying phy settings" This reverts commit f96dee13b8e10f00840124255bed1d8b4c6afd6f. It isn't right, ethtool is meant to manage one PHY instance per netdevice at a time, and this is selected by the SET command. Therefore by definition the GET command must only return the settings for the configured and selected PHY. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 21:43:50 UTC
7a6cb0a ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage Avoid entering "RTC-only mode" at poweroff. It is unsupported by most versions of BeagleBone, and risks hardware damage. The damaging configuration is having system-power-controller without ti,pmic-shutdown-controller. Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Johan Hovold <johan@kernel.org> [Matthijs van Duin: added explanatory comments] Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com> Fixes: http://bugs.elinux.org/issues/143 Cc: stable@vger.kernel.org # v3.12+ [tony@atomide.com: updated comments with the hardware breaking info] Signed-off-by: Tony Lindgren <tony@atomide.com> 01 June 2015, 19:48:23 UTC
c6e36d8 bnx2x: Move statistics implementation into semaphores Commit dff173de84958 ("bnx2x: Fix statistics locking scheme") changed the bnx2x locking around statistics state into using a mutex - but the lock is being accessed via a timer which is forbidden. [If compiled with CONFIG_DEBUG_MUTEXES, logs show a warning about accessing the mutex in interrupt context] This moves the implementation into using a semaphore [with size '1'] instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 19:04:31 UTC
31a4189 xen: netback: read hotplug script once at start of day. When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 19:03:04 UTC
dc5e7a8 xen: netback: fix printf format string warning drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_build_gops’: drivers/net/xen-netback/netback.c:1253:8: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=] (txreq.offset&~PAGE_MASK) + txreq.size); ^ PAGE_MASK's type can vary by arch, so a cast is needed. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> ---- v2: Cast to unsigned long, since PAGE_MASK can vary by arch. Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 June 2015, 19:03:04 UTC
back to top