| a2755a8 | Linus Torvalds | 20 April 2005, 23:24:21 UTC | Linux v2.6.12-rc3 Releasing this will also make "git" the official source control thing. Here's to hoping for the best. | 20 April 2005, 23:24:21 UTC |
| 4d78b6c | Herbert Xu | 20 April 2005, 05:48:59 UTC | [IPSEC]: COW skb header in UDP decap The following patch just makes the header part of the skb writeable. This is needed since we modify the IP headers just a few lines below. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:48:59 UTC |
| c7f905f | Herbert Xu | 20 April 2005, 05:44:17 UTC | [ATALK]: Add missing dev_hold() to atrtr_create(). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:44:17 UTC |
| 88a6685 | Arnaldo Carvalho de Melo | 20 April 2005, 05:41:54 UTC | [SOCK]: on failure free the sock from the right place Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:41:54 UTC |
| 9c2b332 | Stephen Hemminger | 20 April 2005, 05:39:42 UTC | [NET]: skbuff: remove old NET_CALLER macro Here is a revised alternative that uses BUG_ON/WARN_ON (as suggested by Herbert Xu) to eliminate NET_CALLER. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:39:42 UTC |
| 98f245e | David S. Miller | 20 April 2005, 05:37:04 UTC | [RTNETLINK]: Add comma to final entry in link_rtnetlink_table Noticed by Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:37:04 UTC |
| 240eed9 | Thomas Graf | 20 April 2005, 05:35:07 UTC | [RTNETLINK]: Protocol family wildcard dumping for routing rules Be kind to userspace and don't force them to hardcode protocol families just to have it changed again once we support routing rules for more than one protocol family. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:35:07 UTC |
| 3320da8 | Herbert Xu | 20 April 2005, 05:32:22 UTC | [IPV6]: Replace bogus instances of inet->recverr While looking at this problem I noticed that IPv6 was sometimes looking at inet->recverr which is bogus. Here is a patch to correct that and use np->recverr. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:32:22 UTC |
| 357b40a | Herbert Xu | 20 April 2005, 05:30:14 UTC | [IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory So here is a patch that introduces skb_store_bits -- the opposite of skb_copy_bits, and uses them to read/write the csum field in rawv6. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:30:14 UTC |
| fd92833 | YOSHIFUJI Hideaki | 20 April 2005, 05:27:09 UTC | [IPV6]: Fix a branch prediction From: Tushar Gohad <tgohad@mvista.com> Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 05:27:09 UTC |
| c4d5411 | Herbert Xu | 20 April 2005, 03:46:37 UTC | [NET]: Shave sizeof(ptr) bytes off dst_entry Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 April 2005, 03:46:37 UTC |
| 561bbe3 | Hugh Dickins | 19 April 2005, 20:29:23 UTC | [PATCH] freepgt: remove FIRST_USER_ADDRESS hack Once all the MMU architectures define FIRST_USER_ADDRESS, remove hack from mmap.c which derived it from FIRST_USER_PGD_NR. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:23 UTC |
| d455a36 | Hugh Dickins | 19 April 2005, 20:29:23 UTC | [PATCH] freepgt: arch FIRST_USER_ADDRESS 0 Replace misleading definition of FIRST_USER_PGD_NR 0 by definition of FIRST_USER_ADDRESS 0 in all the MMU architectures beyond arm and arm26. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:23 UTC |
| cdfb82f | Hugh Dickins | 19 April 2005, 20:29:22 UTC | [PATCH] freepgt: arm26 FIRST_USER_ADDRESS PAGE_SIZE ARM26 define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when they are mapped low), and use that definition in place of locally defined MIN_MAP_ADDR. Previously, ARM26 permitted user mappings at 0 if the machine vectors were mapped high; but that's inconsistent with ARM, and FIRST_USER_ADDRESS would then have to be determined at runtime. Let's fix it at PAGE_SIZE throughout the architecture. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:22 UTC |
| 6119be0 | Hugh Dickins | 19 April 2005, 20:29:21 UTC | [PATCH] freepgt: arm FIRST_USER_ADDRESS PAGE_SIZE ARM define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when they are mapped low), and use that definition in place of locally defined MIN_MAP_ADDR. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:21 UTC |
| 8462e20 | Hugh Dickins | 19 April 2005, 20:29:20 UTC | [PATCH] freepgt: sys_mincore ignore FIRST_USER_PGD_NR Remove use of FIRST_USER_PGD_NR from sys_mincore: it's inconsistent (no other syscall refers to it), unnecessary (sys_mincore loops over vmas further down) and incorrect (misses user addresses in ARM's first pgd). Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:20 UTC |
| e2cdef8 | Hugh Dickins | 19 April 2005, 20:29:19 UTC | [PATCH] freepgt: free_pgtables from FIRST_USER_ADDRESS The patches to free_pgtables by vma left problems on any architectures which leave some user address page table entries unencapsulated by vma. Andi has fixed the 32-bit vDSO on x86_64 to use a vma. Now fix arm (and arm26), whose first PAGE_SIZE is reserved (perhaps) for machine vectors. Our calls to free_pgtables must not touch that area, and exit_mmap's BUG_ON(nr_ptes) must allow that arm's get_pgd_slow may (or may not) have allocated an extra page table, which its free_pgd_slow would free later. FIRST_USER_PGD_NR has misled me and others: until all the arches define FIRST_USER_ADDRESS instead, a hack in mmap.c to derive one from t'other. This patch fixes the bugs, the remaining patches just clean it up. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:19 UTC |
| 021740d | Hugh Dickins | 19 April 2005, 20:29:18 UTC | [PATCH] freepgt: hugetlb area is clean Once we're strict about clearing away page tables, hugetlb_prefault can assume there are no page tables left within its range. Since the other arches continue if !pte_none here, let i386 do the same. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:18 UTC |
| 146425a | Hugh Dickins | 19 April 2005, 20:29:18 UTC | [PATCH] freepgt: mpnt to vma cleanup While dabbling here in mmap.c, clean up mysterious "mpnt"s to "vma"s. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:18 UTC |
| 8f6c99c | Hugh Dickins | 19 April 2005, 20:29:17 UTC | [PATCH] freepgt: remove arch pgd_addr_end ia64 and sparc64 hurriedly had to introduce their own variants of pgd_addr_end, to leapfrog over the holes in their virtual address spaces which the final clear_page_range suddenly presented when converted from pgd_index to pgd_addr_end. But now that free_pgtables respects the vma list, those holes are never presented, and the arch variants can go. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:17 UTC |
| 3bf5ee9 | Hugh Dickins | 19 April 2005, 20:29:16 UTC | [PATCH] freepgt: hugetlb_free_pgd_range ia64 and ppc64 had hugetlb_free_pgtables functions which were no longer being called, and it wasn't obvious what to do about them. The ppc64 case turns out to be easy: the associated tables are noted elsewhere and freed later, safe to either skip its hugetlb areas or go through the motions of freeing nothing. Since ia64 does need a special case, restore to ppc64 the special case of skipping them. The ia64 hugetlb case has been broken since pgd_addr_end went in, though it probably appeared to work okay if you just had one such area; in fact it's been broken much longer if you consider a long munmap spanning from another region into the hugetlb region. In the ia64 hugetlb region, more virtual address bits are available than in the other regions, yet the page tables are structured the same way: the page at the bottom is larger. Here we need to scale down each addr before passing it to the standard free_pgd_range. Was about to write a hugely_scaled_down macro, but found htlbpage_to_page already exists for just this purpose. Fixed off-by-one in ia64 is_hugepage_only_range. Uninline free_pgd_range to make it available to ia64. Make sure the vma-gathering loop in free_pgtables cannot join a hugepage_only_range to any other (safe to join huges? probably but don't bother). Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:16 UTC |
| ee39b37 | Hugh Dickins | 19 April 2005, 20:29:15 UTC | [PATCH] freepgt: remove MM_VM_SIZE(mm) There's only one usage of MM_VM_SIZE(mm) left, and it's a troublesome macro because mm doesn't contain the (32-bit emulation?) info needed. But it too is only needed because we ignore the end from the vma list. We could make flush_pgtables return that end, or unmap_vmas. Choose the latter, since it's a natural fit with unmap_mapping_range_vma needing to know its restart addr. This does make more than minimal change, but if unmap_vmas had returned the end before, this is how we'd have done it, rather than storing the break_addr in zap_details. unmap_vmas used to return count of vmas scanned, but that's just debug which hasn't been useful in a while; and if we want the map_count 0 on exit check back, it can easily come from the final remove_vm_struct loop. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:15 UTC |
| e0da382 | Hugh Dickins | 19 April 2005, 20:29:15 UTC | [PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 19 April 2005, 20:29:15 UTC |
| 9f6c6fc | Linus Torvalds | 19 April 2005, 20:14:28 UTC | Merge with kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/ for 13 driver core, sysfs, and debugfs fixes. | 19 April 2005, 20:14:28 UTC |
| c3c6619 | Linus Torvalds | 19 April 2005, 20:12:03 UTC | Merge with kernel.org:/pub/scm/linux/kernel/git/gregkh/aoe-2.6.git/ for 11 aoe bugfix patches. | 19 April 2005, 20:12:03 UTC |
| c79bea0 | Linus Torvalds | 19 April 2005, 14:31:40 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6.git/ | 19 April 2005, 14:31:40 UTC |
| a9e4820 | Linus Torvalds | 19 April 2005, 14:28:57 UTC | Merge with Greg's USB tree at kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/ Yah, it does work to merge. Knock wood. | 19 April 2005, 14:28:57 UTC |
| a4b3836 | ecashin@coraid.com | 19 April 2005, 05:00:22 UTC | [PATCH] aoe 12/12: send outgoing packets in order I can't use list.h, since sk_buff doesn't have a list_head but instead has two struct sk_buff pointers, and I want to avoid any extra memory allocation. send outgoing packets in order Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:22 UTC |
| 0c6f0e7 | ecashin@coraid.com | 19 April 2005, 05:00:22 UTC | [PATCH] aoe 11/12: add support for disk statistics add support for disk statistics Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:22 UTC |
| e3b7df6 | ecashin@coraid.com | 19 April 2005, 05:00:21 UTC | [PATCH] aoe 9/12: add note about the need for deadlock-free sk_buff allocation add note about the need for deadlock-free sk_buff allocation Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:21 UTC |
| d098840 | ecashin@coraid.com | 19 April 2005, 05:00:20 UTC | [PATCH] aoe 8/12: document env var for specifying number document env var for specifying number of partitions per dev Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:20 UTC |
| 63e9cc5 | ecashin@coraid.com | 19 April 2005, 05:00:20 UTC | [PATCH] aoe 6/12: Alexey Dobriyan sparse cleanup Alexey Dobriyan sparse cleanup Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:20 UTC |
| 0334793 | ecashin@coraid.com | 19 April 2005, 05:00:19 UTC | [PATCH] aoe 5/12: don't try to free null bufpool don't try to free null bufpool Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:19 UTC |
| fa83c2d | ecashin@coraid.com | 19 April 2005, 05:00:19 UTC | [PATCH] aoe 4/12: handle distros that have a udev rules handle distros that have a udev rules file instead of dir Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:19 UTC |
| b68650f | ecashin@coraid.com | 19 April 2005, 05:00:18 UTC | [PATCH] aoe 3/12: update driver version to 6 update driver version to 6 Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:18 UTC |
| 32465c6 | ecashin@coraid.com | 19 April 2005, 05:00:18 UTC | [PATCH] aoe 2/12: allow multiple aoe devices with same MAC allow multiple aoe devices with same MAC addr Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:18 UTC |
| fc458dc | ecashin@coraid.com | 19 April 2005, 05:00:17 UTC | [PATCH] aoe 1/12: remove too-low cap on minor number remove too-low cap on minor number Signed-off-by: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 05:00:17 UTC |
| f0e035f | kay.sievers@vrfy.org | 19 April 2005, 04:57:37 UTC | [PATCH] kobject/hotplug split - net bridge kobject_add() and kobject_del() don't emit hotplug events anymore. We need to do it ourselves now. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:37 UTC |
| 089d42b | kay.sievers@vrfy.org | 19 April 2005, 04:57:37 UTC | [PATCH] kobject/hotplug split - usb cris kobject_add() and kobject_del() don't emit hotplug events anymore. We need to do it ourselves now. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:37 UTC |
| e57cd73 | kay.sievers@vrfy.org | 19 April 2005, 04:57:36 UTC | [PATCH] kobject/hotplug split - devices core kobject_add() and kobject_del() don't emit hotplug events anymore. Do it ourselves if we are finished populating the device directory. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:36 UTC |
| b41148c | kay.sievers@vrfy.org | 19 April 2005, 04:57:36 UTC | [PATCH] kobject/hotplug split - block core kobject_add() and kobject_del() don't emit hotplug events anymore. Do it ourselves if we are finished populating the device directory. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:36 UTC |
| 0700f56 | kay.sievers@vrfy.org | 19 April 2005, 04:57:35 UTC | [PATCH] kobject/hotplug split - class core kobject_add() and kobject_del() don't emit hotplug events anymore. Do it ourselves if we are finished populating the device directory. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:35 UTC |
| 18c3d52 | kay.sievers@vrfy.org | 19 April 2005, 04:57:34 UTC | [PATCH] kobject/hotplug split - kobject add/remove kobject_add() and kobject_del() don't emit hotplug events anymore. The user should do it itself if it has finished populating the device directory. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:34 UTC |
| 7b55863 | Michal Ostrowski | 19 April 2005, 04:57:34 UTC | [PATCH] debugfs: fix !debugfs prototypes - Fix prototypes for debugfs functions (in configurations where debugfs is disabled). Signed-off-by: Michal Ostrowski <mostrows@speakeasy.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:34 UTC |
| a7a76ce | Roland Dreier | 19 April 2005, 04:57:33 UTC | [PATCH] debugfs: Reduce <linux/debugfs.h> dependencies The current <linux/debugfs.h> include file is a little fragile in that it is not self-contained and hence may cause compile warnings or errors depending on the files included before it, the kernel config and the architecture. This patch makes things a little more robust by: - including <linux/types.h> to get definitions of u32, mode_t, and so on. - forward declaring struct file_operations. - including <linux/err.h> when CONFIG_DEBUG_FS is not set The last change is particularly useful, as a kernel developer is likely to build with debugfs always enabled and never see the build breakage cased if debugfs is disabled. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:33 UTC |
| 1694145 | Steven Cole | 19 April 2005, 04:57:33 UTC | [PATCH] 2.6.12-rc1-mm3 Fix ver_linux script for no udev utils. Without the attached patch, the ver_linux script gives the following if udev utils are not present. ./scripts/ver_linux: line 90: udevinfo: command not found The patch causes ver_linux to be silent in the case of no udevinfo command. Signed-off-by: Steven Cole <elenstev@mesatop.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:33 UTC |
| 46ea0d6 | Robert Schwebel | 19 April 2005, 04:57:32 UTC | [PATCH] export platform_add_devices platform_add_devices can be used from within modules, so it should be exported. This can for example happen if you have hotpluggable firmware in an FPGA on a system on chip processor; in our case the FPGA is probed for devices and the FPGA base code registers the devices it has found with the kernel. (akpm: I think this is reasonable from a licensing POV: it's unlikely that anyone would be interested in merging such specialised modules into mainline, and it's a GPL export). Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:32 UTC |
| 31e5abe | Kay Sievers | 19 April 2005, 04:57:32 UTC | [PATCH] sysfs: add sysfs_chmod_file() sysfs: allow changing the permissions for already created attributes Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:32 UTC |
| 6897089 | kay.sievers@vrfy.org | 19 April 2005, 04:57:31 UTC | [PATCH] add TIMEOUT to firmware_class hotplug event On Tue, 2005-03-15 at 09:25 +0100, Hannes Reinecke wrote: > The current implementation of the firmware class breaks a fundamental > assumption in udevd: that the physical device can be initialised fully > prior to executing the next event for that device. Here we add a TIMEOUT value to the hotplug environment of the firmware requesting event. I will adapt udevd not to wait for anything else, if it finds a TIMEOUT key. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:31 UTC |
| 6f31e42 | gregkh@suse.de | 19 April 2005, 04:57:30 UTC | [PATCH] kref: add link to original documentation to the kref documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:30 UTC |
| 5c11c52 | minyard@acm.org | 19 April 2005, 04:57:30 UTC | [PATCH] kref: add documentation Add some documentation for krefs. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:57:30 UTC |
| 1d66c64 | Jean Delvare | 19 April 2005, 04:16:59 UTC | [PATCH] I2C: Fix incorrect sysfs file permissions in it87 and via686a drivers The it87 and via686a hardware monitoring drivers each create a sysfs file named "alarms" in R/W mode, while they should really create it in read-only mode. Since we don't provide a store function for these files, write attempts to these files will do something undefined (I guess) and bad (I am sure). My own try resulted in a locked terminal (where I attempted the write) and a 100% CPU load until next reboot. As a side note, wouldn't it make sense to check, when creating sysfs files, that readable files have a non-NULL show method, and writable files have a non-NULL store method? I know drivers are not supposed to do stupid things, but there is already a BUG_ON for several conditions in sysfs_create_file, so maybe we could add two more? Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:16:59 UTC |
| 86b5ac8 | Jean Delvare | 19 April 2005, 04:16:58 UTC | [PATCH] I2C: via686a cleanups Here comes a small cleanup patch for the via686a driver. I noticed the following two non-fatal problems: 1* The device parent is explicitely set, but it's not needed because the i2c core will do as the client is registered. 2* snprintf is used where strlcpy would suffice. Fixing them brings the via686a driver in line with what other similar drivers do. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:16:58 UTC |
| 0598571 | johnpol@2ka.mipt.ru | 19 April 2005, 04:16:57 UTC | [PATCH] w1_smem: w1 ID is only 8 bytes long. w1 ID is only 8 bytes long. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:16:57 UTC |
| 8523ff4 | johnpol@2ka.mipt.ru | 19 April 2005, 04:16:57 UTC | [PATCH] w1: real fix for big endian machines. Real fix for big endian machines - crc must be calculated using little endian byte order. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 04:16:57 UTC |
| c0698f2 | James Bottomley | 19 April 2005, 01:55:09 UTC | fully merge up to scsi-misc-2.6 | 19 April 2005, 01:55:09 UTC |
| e838a0d | Viktor A. Danilov | 19 April 2005, 00:39:35 UTC | [PATCH] USB: fix AIPTEK input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#) PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#) REASON: `dev` - field not filled... SOLUTION: in linux/drivers/usb/input/aiptek.c write aiptek->inputdev.dev = &intf->dev; before calling input_register_device(&aiptek->inputdev); From: "Viktor A. Danilov" <__die@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/input/aiptek.c =================================================================== | 19 April 2005, 00:39:35 UTC |
| 6cdee10 | David Brownell | 19 April 2005, 00:39:34 UTC | [PATCH] usb gadget: ethernet/rndis updates Updates to the Ethernet/RNDIS gadget driver (mostly for RNDIS): - Fix brown-paper bag goof with RNDIS packet TX ... the wrong length field got set, so Windows would ignore data packets it received. - More consistent handling of CDC output filters (but not yet hooking things up so RNDIS uses the mechanism). - Zerocopy RX for RNDIS packets too (saving CPU cycles). - Use the pre-allocated interrupt/status request and buffer, rather than allocating and freeing one of each every few seconds (which could fail). - Some more "sparse" tweaks, making both dual-speed and single-speed configurations happier. - RNDIS speeds are reported in units of 100bps, not bps. Plus two minor cleanups (whitespace, messaging). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:34 UTC |
| 1bc3c9e | Jesper Juhl | 19 April 2005, 00:39:34 UTC | [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c =================================================================== | 19 April 2005, 00:39:34 UTC |
| 6fd19f4 | Jesper Juhl | 19 April 2005, 00:39:33 UTC | [PATCH] usb: kfree() cleanups in drivers/usb/core/devio.c Checking for NULL before calling kfree() is redundant. This patch removes these redundant checks and also makes a few tiny whitespace changes. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:33 UTC |
| acbb36f | Peter Favrholdt | 19 April 2005, 00:39:32 UTC | [PATCH] USB: pl2303 new vendor/model ids Please accept the attached patch which adds the vendorid 0x0745 and modelid 0x0001 (ID 0745:0001) "Syntech Information Co., Ltd." The device is an USB IR cradle for a barcode scanner (CPT-8001C) from Cipherlab. From: Peter Favrholdt <pfavr@mip.sdu.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -u kernel-source-2.6.11/drivers/usb/serial/pl2303.c ../kernel-source-2.6.11/drivers/usb/serial/pl2303.c | 19 April 2005, 00:39:32 UTC |
| 97bb13e | Flavio Leitner | 19 April 2005, 00:39:31 UTC | [PATCH] pl2303 - status line I'm attaching a patch to fix status when using Siemens X65 mobile. This mobile use first byte instead of normal UART_STATE byte. From: Flavio Leitner <fbl@conectiva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/serial/pl2303.c =================================================================== | 19 April 2005, 00:39:31 UTC |
| 6fdd8e8 | Flavio Leitner | 19 April 2005, 00:39:31 UTC | [PATCH] pl2303 - unplug device. It's possible to unplug usb device and do tiocmset() and tiocmget() without valid interface in pl2303 module. The patch below check this and return -ENODEV if interface was removed. From: Flavio Leitner <fbl@conectiva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -purN linux-05-04-11/drivers/usb/serial/pl2303.c linux-05-04-11.usb/drivers/usb/serial/pl2303.c | 19 April 2005, 00:39:31 UTC |
| 8835f66 | Alan Stern | 19 April 2005, 00:39:30 UTC | [PATCH] USB: USB API documentation modification In response to complaints about excessive latency in the uhci-hcd driver I'm planning to convert it to a top-half/bottom-half design. It turns out that to do this, the USB API has to be modified slightly since the driver will not be able to meet one of the guarantees in the current API. This patch changes some kerneldoc, specifying the weaker guarantee. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:30 UTC |
| 0e49876 | David Brownell | 19 April 2005, 00:39:30 UTC | [PATCH] USB: OHCI on Compaq Aramada 7400 This adds a quirk to the OHCI driver that lets it work with an old Compaq implementation. It also removes some needless strings from the non-debug version of the driver. Signed-off-by: Chris Clayton <chris_clayton@f1internet.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:30 UTC |
| a2fe201 | David Brownell | 19 April 2005, 00:39:29 UTC | [PATCH] USB: usbnet and zaurus zl-5600 Hmm, another case of a Zaurus ROM not telling the expected conformance lie; this patch handles the lies told by the SL5600. From: bender647@gmail.com Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:29 UTC |
| 7ab7c34 | Thomas Winischhofer | 19 April 2005, 00:39:28 UTC | [PATCH] USB: new SIS device id the attached patch adds another USB device ID to the list. Seems the device is known under multiple IDs. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:28 UTC |
| d6427cf | felix@derklecks.de | 19 April 2005, 00:39:28 UTC | [PATCH] USB Storage unusual_dev.h 07c4:a10b Datafab Systems, Inc. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/storage/unusual_devs.h =================================================================== | 19 April 2005, 00:39:28 UTC |
| e4334fa | Phil Dibowitz | 19 April 2005, 00:39:27 UTC | [PATCH] Fix GO_SLOW delay This patch changes the delay for the US_FL_GO_SLOW patch from 110us to 125. Some delays need this extra delay includign Jan De Luyck's drive which spawned the original increase from 110 to 110us. 125 is a microframe, so this delay seems to make sense more than just be a random delay (thanks to David Brownell for pointing that out after my original patch). Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/storage/transport.c =================================================================== | 19 April 2005, 00:39:27 UTC |
| 403a981 | akpm@osdl.org | 19 April 2005, 00:39:27 UTC | [PATCH] USB: usbnet printk warning fix On ppc64: drivers/usb/net/usbnet.c: In function `skb_return': drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3) drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -puN drivers/usb/net/usbnet.c~usbnet-printk-warning-fix drivers/usb/net/usbnet.c | 19 April 2005, 00:39:27 UTC |
| 668a954 | Christopher Li | 19 April 2005, 00:39:26 UTC | [PATCH] USB: bug fix in usbdevfs I am sorry that the last patch about 32 bit compat ioctl on 64 bit kernel actually breaks the usbdevfs. That is on the current BK tree. I am retarded. Here is the patch to fix it. Tested with USB hard disk and webcam in both 32bit compatible mode and native 64bit mode. Again, sorry about that. From: Christopher Li <chrisl@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:26 UTC |
| a81e7ec | David Brownell | 19 April 2005, 00:39:25 UTC | [PATCH] USB: revert "fix" to usb_set_interface() This reverts a recent change to usb_set_interface(). The change worked around a quirk in certain devices, but doing this in usbcore creates needless regressions for other devices. More appropriate fixes won't put such handling in usbcore. Basically it's tricky to do a full software reset of USB device state, since the devices don't all act the same. This adds a note to the kerneldoc for the usb_reset_configuration() call to highlight the quirk this was working around: endpoint data toggles not being reset. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:25 UTC |
| 45f23f1 | Nishanth Aravamudan | 19 April 2005, 00:39:25 UTC | [PATCH] USB: usb/digi_acceleport: correct wait-queue state First patch incorrectly changed state of the wait-queue usage to TASK_UNINTERRUPTIBLE. Reverted to TASK_INTERRUPTIBLE. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:25 UTC |
| 6d5e825 | Greg KH | 19 April 2005, 00:39:24 UTC | [PATCH] USB: fix up some sparse warnings about static functions that aren't static. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.h =================================================================== | 19 April 2005, 00:39:24 UTC |
| ba9d35f | Pavel Machek | 19 April 2005, 00:39:24 UTC | [PATCH] USB: fix up remaining pm_message_t usages Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:24 UTC |
| 9a5d3e9 | David Brownell | 19 April 2005, 00:39:23 UTC | [PATCH] USB: hcd suspend uses pm_message_t This patch includes minor "sparse -Wbitwise" updates for the PCI based HCDs. Almost all of them involve just changing the second parameter of the suspend() method to a pm_message_t ... the others relate to how the EHCI code walks in-memory data structures. (There's a minor bug fixed there too ... affecting the big-endian sysfs async schedule dump.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/hcd.h =================================================================== | 19 April 2005, 00:39:23 UTC |
| 27d72e8 | David Brownell | 19 April 2005, 00:39:22 UTC | [PATCH] usb suspend updates (interface suspend) This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c =================================================================== | 19 April 2005, 00:39:22 UTC |
| c6053ec | David Brownell | 19 April 2005, 00:39:22 UTC | [PATCH] usb resume fixes This has a variety of updates to the shared suspend/resume code for PCI based USB host controllers. - Cope with pm_message_t replacing the target system state. This is actually a loss of functionality; PCI D1 and D2 states will no longer be used, and it's no longer knowable that D3cold is on the way so power will be lost. - Most importantly, some of the resume paths are reworked and cleaned up. They're now an exact mirror of suspend paths, and more care is taken to ensure the hardware is reactivated before the hardware re-enables interrupts. Plus comment and diagnostic cleanups; there are some nasty cases here especially combined with swsusp, now they're somewhat commented. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -puN drivers/usb/core/hcd-pci.c~usb-resume-fixes drivers/usb/core/hcd-pci.c | 19 April 2005, 00:39:22 UTC |
| 84d79cb | akpm@osdl.org | 19 April 2005, 00:39:21 UTC | [PATCH] USB: usb_cdc build fix With older gcc's: In file included from drivers/usb/class/cdc-acm.c:63: include/linux/usb_cdc.h:117: field `bDetailData' has incomplete type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -puN include/linux/usb_cdc.h~usb_cdc-build-fix include/linux/usb_cdc.h | 19 April 2005, 00:39:21 UTC |
| 115c1ce | Larry Battraw | 19 April 2005, 00:39:20 UTC | [PATCH] USB: visor Tapwave Zodiac support patch Here's a tiny patch to add support for the Tapwave Zodiac (for 2.6.11.6). I've been meaning to send it in for a while but kept upgrading my kernel and losing the changes :-) I own the device and it works fine with the latest pilot-link beta. From: Larry Battraw <lbattraw@insightbb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 April 2005, 00:39:20 UTC |
| ac21e9f | gregkh@suse.de | 19 April 2005, 00:39:20 UTC | [PATCH] USB: add new visor id for Treo 650 Thanks to Jamieson Becker <jamie@jamiebecker.com> for the info Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -Naur -X dontdiff-osdl tmp/linux-2.6.12-rc2/drivers/usb/serial/visor.h linux-2.6/drivers/usb/serial/visor.h | 19 April 2005, 00:39:20 UTC |
| 7f907d7 | Linus Torvalds | 18 April 2005, 23:25:10 UTC | Merge with master.kernel.org:/home/rmk/linux-2.6-rmk.git This adds the missing arch/arm/lib/bitops.h file. | 18 April 2005, 23:25:10 UTC |
| 0ba4da0 | David S. Miller | 18 April 2005, 22:13:15 UTC | [PATCH] sparc64: Fix stat Like Alpha, sparc64's struct stat was defined before we had the nanosecond et al. fields added. So like Alpha I have to cons up a struct stat64 to get this stuff. I'll work on the glibc bits soon. Also, we were forgetting to fill in the nanosecond fields in the sparc compat stat64 syscalls. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 18 April 2005, 22:13:15 UTC |
| 7a55fd0 | Russell King | 18 April 2005, 21:50:01 UTC | [PATCH] ARM: Add missing new file for bitops patch Signed-off-by: Russell King <rmk@arm.linux.org.uk> | 18 April 2005, 21:50:01 UTC |
| 0b2cad2 | Linus Torvalds | 18 April 2005, 21:25:40 UTC | Merge SCSI tree from James Bottomley. Done with "git-pull-script rsync://www.parisc-linux.org/~jejb/scsi-rc-fixes-2.6.git" together with an automated content merge. | 18 April 2005, 21:25:40 UTC |
| cb62402 | <jejb@titanic.il.steeleye.com> | 17 April 2005, 23:03:20 UTC | aic7xxx: convert to SPI transport class Domain Validation Now that we export all the parameters, this is easy to do. It also means that we can dump about 2000 lines of code that were dedicated to doing this internally. Additionally, this removes all the aic7xxx driver abuse of SCSI timers which were embedded in the DV routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:52:27 UTC |
| 92d161c | <jejb@titanic.il.steeleye.com> | 17 April 2005, 21:59:33 UTC | aic7xxx: add support for the SPI transport class This is just a simplistic patch to export all of the aic7xxx internal transport parameters via the SPI transport class. It doesn't actually alter the way the driver works at all. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:52:02 UTC |
| 7aaef27 | <jejb@titanic.il.steeleye.com> | 17 April 2005, 21:32:42 UTC | qla2xxx: fix compiler warning in qla_attr.c CC [M] drivers/scsi/qla2xxx/qla_attr.o drivers/scsi/qla2xxx/qla_attr.c: In function `qla2x00_sysfs_write_fw_dump': drivers/scsi/qla2xxx/qla_attr.c:65: warning: implicit declaration of function `vfree' drivers/scsi/qla2xxx/qla_attr.c:83: warning: implicit declaration of function `vmalloc' drivers/scsi/qla2xxx/qla_attr.c:83: warning: cast to pointer from integer of different size Also remove spurious inclusion of linux/version.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:51:37 UTC |
| dea3101 | <jejb@titanic.il.steeleye.com> | 17 April 2005, 21:05:31 UTC | lpfc: add Emulex FC driver version 8.0.28 From: James.Smart@Emulex.Com Modified for kernel import and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:50:53 UTC |
| 8e87904 | <bunk@stusta.de> | 17 April 2005, 20:28:39 UTC | [PATCH] drivers/scsi/gdth.c: cleanups This patch contains the following cleanups: - make some needlessly global functions static - remove one more kernel 2.2 #ifdef Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:50:23 UTC |
| be7db05 | <hch@lst.de> | 17 April 2005, 20:26:13 UTC | [PATCH] remove old scsi data direction macros these have been wrappers for the generic dma direction bits since 2.5.x. This patch converts the few remaining drivers and removes the macros. Arjan noticed there's some hunk in here that shouldn't. Updated patch below: Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:49:58 UTC |
| 80e2ca3 | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:16:47 UTC | [PATCH] qla2xxx: update version to 8.00.02b5-k Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:49:27 UTC |
| d6e957b | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:14:51 UTC | [PATCH] qla2xxx: remove sale revision notes file Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:49:01 UTC |
| 6721d2c | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:13:01 UTC | [PATCH] qla2xxx: remove /proc interface Remove /proc support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:48:36 UTC |
| 8302192 | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:10:41 UTC | [PATCH] qla2xxx: cleanup DMA mappings... Don't use cmd->request->nr_hw_segments as it may not be initialized (SG_IO in particular bypasses anything that initializes this and just uses scsi_do_req to insert a scsi_request directly on the head of the queue) and a bogus value here can trip up the checks to make sure that the number of segments will fit in the queue ring buffer, resulting in commands that are never completed. Fix up several issues with PCI DMA mapping and failure to check return values on the mappings. Make the check for space in the ring buffer happen after the DMA mapping is done since any checks done before the mapping has taken place are bogus. Doug Ledford <dledford@redhat.com>. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:48:12 UTC |
| bdf7962 | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:06:53 UTC | [PATCH] qla2xxx: remove lun discovery codes... Remove internal lun discovery routines and support structures. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:47:46 UTC |
| 8482e11 | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:04:54 UTC | [PATCH] qla2xxx: add remote port codes... Add initial support for FC remote port infrastructure. o Use fc_remote_port...() registration and block/unlock functions. o Consolidate 'attribute' (fc-remote/sysfs) helpers into new qla_attr.c file. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:47:19 UTC |
| f4f051e | <andrew.vasquez@qlogic.com> | 17 April 2005, 20:02:26 UTC | [PATCH] qla2xxx: remove internal queuing... Remove internal command queuing from the driver. As is, this driver cannot tolerate cable-pulls as I/Os will begin to fail by the upper layers. o Should be used in conjuction with the 11-fc_rport_adds_2.diff patch. o Removes qla_listops.h file -- no longer needed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 18 April 2005, 18:46:53 UTC |
| c46f2ff | James Bottomley | 18 April 2005, 18:45:00 UTC | merge by hand (scsi_device.h) | 18 April 2005, 18:45:00 UTC |
| 238628e | Ingo Molnar | 18 April 2005, 17:58:36 UTC | [PATCH] sched: fix signed comparisons of long long Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 18 April 2005, 17:58:36 UTC |
