Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
4c91aed Linus Torvalds 29 June 2005, 05:57:29 UTC Linux v2.6.13-rc1 Ok, a lot of things were pending after the 2.6.12 release, let's try to start calming things down again. 29 June 2005, 05:57:29 UTC
b9a05d1 Jeff Garzik 29 June 2005, 05:17:55 UTC [PATCH] ieee80211.h build fix This crept in with the resync-to-mainline. Nothing uses 802.11-crypt in mainline, so we can safely comment it out for now. Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 05:45:32 UTC
a839688 Linus Torvalds 29 June 2005, 04:24:32 UTC Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 29 June 2005, 04:24:32 UTC
2fa938b Dave Jones 29 June 2005, 00:08:29 UTC [PATCH] sis 760 support. This patch adds the SiS 760 ID to the amd64-agp driver, so that agpgart can be used on Athlon64 boards based on this chip. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:22:14 UTC
2668fb9 William Lee Irwin III 29 June 2005, 03:45:31 UTC [PATCH] sparc32: Kconfig fixups Something reverted most of the arch/sparc/Kconfig changes, leaving arch/sparc/ unconfigurable. This patch re-removes the parts made redundant by drivers/Kconfig in addition to a mysterious, spurious second instance of source "mm/Kconfig". cvs strikes again? Signed-off-by: William Irwin <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:37 UTC
84da7c0 Randy Dunlap 29 June 2005, 03:45:30 UTC [PATCH] Doc/Submitting: corrections, additions Corrections to Documentation/Submitting{Drivers,Patches} - update LANANA info. - fix some typos - update 2.2 kernel maintainer info. - update 'dontdiff' info. - update URLs for patch scripts - add Trivial Patch Monkey URL - add more references for submitting patches Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:37 UTC
6623e62 Mauro Carvalho Chehab 29 June 2005, 03:45:28 UTC [PATCH] V4L: documentation changes - mostly new cards included New cards included. V4L1 api renamed. Message included informing it is obsoleted by V4L2 API. V4L2 api included. Mark all 7135 cards as 7133. Signed-off-by: Luc Saillard <luc@saillard.org>. Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:37 UTC
115d6f3 Mauro Carvalho Chehab 29 June 2005, 03:45:27 UTC [PATCH] V4L: API new webcam formats included Add Philips Webcam format. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Luc Saillard <luc@saillard.org>. Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:36 UTC
060d302 Mauro Carvalho Chehab 29 June 2005, 03:45:25 UTC [PATCH] v4l: bttv new insmod parameters * bttv-driver.c, bttvp.h: - New bttv module params: - uv_ratio : allow a ratio of saturation between u and v. If you have a ratio of 40 and a saturation of 100, usat will be 80 and vstat 120. Useful to correct a bad color balance. - full_luma_range : provide a better contrast in using the full range 0-253 of values instead of 16-253. - coring : to have a better black level. - radio range is now defined on tuner-core.c. Cleaning up. * bttvp.h: - Fix gcc 4.0 compilation Signed-off-by: Jorik Jonker <jorik@dnd.utwente.nl> Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:36 UTC
586b0ca Mauro Carvalho Chehab 29 June 2005, 03:45:21 UTC [PATCH] v4l: tuner improvements *tuner-core.c: - some tuner_info msgs will be generated only if insmod opt tuner_debug enabled. - Implemented tuner-core support for VIDIO_S_TUNER to allow changing mono/stereo mode - Remove unneeded config options. - I2C_CLIENT_MULTI option removed. - support for Philips FMD12ME hybrid tuner - allow to initialize with another tuner - Move PHILIPS_FMD initialization code to set_type function, * tda8290: - Fix dumb error in tda8290 tunning. - Radio tuner uses high-precision step instead of 62.5 KHz. *tea5767.c: - tuner_info msgs will be generated only if insmod tuner option tuner_debug enabled. - some cleanups for better reading. - Radio tuner uses high-precision step instead of 62.5 KHz. - Changing radio mode stereo/mono for tea5767 working. *tuner-simple.c: - TNF9533-D/IF UHF fixup. - Radio tuners now uses high-precision step instead of 62.5 KHz. *mt20xx.c: - Radio tuner uses high-precision step instead of 62.5 KHz. *tda9887.c: - tab and blank spaces corrections. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:36 UTC
96b6aba Mauro Carvalho Chehab 29 June 2005, 03:45:20 UTC [PATCH] V4L maintainer patch This patch updates maintainer info for BTTV and V4L. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Acked-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:36 UTC
200803d Alan Cox 29 June 2005, 03:45:18 UTC [PATCH] irqpoll Anyone reporting a stuck IRQ should try these options. Its effectiveness varies we've found in the Fedora case. Quite a few systems with misdescribed IRQ routing just work when you use irqpoll. It also fixes up the VIA systems although thats now fixed with the VIA quirk (which we could just make default as its what Redmond OS does but Linus didn't like it historically). A small number of systems have jammed IRQ sources or misdescribes that cause an IRQ that we have no handler registered anywhere for. In those cases it doesn't help. Signed-off-by: Alan Cox <number6@the-village.bc.nu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:35 UTC
21fe347 Mingming Cao 29 June 2005, 03:45:16 UTC [PATCH] ext3: reduce allocate-with-reservation lock latencies Currently in ext3 block reservation code, the global filesystem reservation tree lock (rsv_block) is hold during the process of searching for a space to make a new reservation window, including while scaning the block bitmap to verify if the avalible window has a free block. Holding the lock during bitmap scan is unnecessary and could possibly cause scalability issue and latency issues. This patch tries to address this by dropping the lock before scan the bitmap. Before that we need to reserve the open window in case someone else is targetting at the same window. Question was should we reserve the whole free reservable space or just the window size we need. Reserve the whole free reservable space will possibly force other threads which intended to do block allocation nearby move to another block group(cause bad layout). In this patch, we just reserve the desired size before drop the lock and scan the block bitmap. This patch fixed a ext3 reservation latency issue seen on a cvs check out test. Patch is tested with many fsx, tiobench, dbench and untar a kernel test. Signed-Off-By: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:35 UTC
fb3cc43 Nick Piggin 29 June 2005, 03:45:15 UTC [PATCH] blk: light iocontext ops get_io_context needlessly turned off interrupts and checked for racing io context creations. Both of which aren't needed, because the io context can only be created while in process context of the current process. Also, split the function in 2. A light version, current_io_context does not elevate the reference count specifically, but can be used when in process context, because the process holds a reference itself. Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:35 UTC
d634453 Nick Piggin 29 June 2005, 03:45:14 UTC [PATCH] blk: reduce locking Change around locking a bit for a result of 1-2 less spin lock unlock pairs in request submission paths. Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:34 UTC
450991b Nick Piggin 29 June 2005, 03:45:13 UTC [PATCH] blk: __make_request efficiency In the case where the request is not able to be merged by the elevator, don't retake the lock and retry the merge mechanism after allocating a new request. Instead assume that the chance of a merge remains slim, and now that we've done most of the work allocating a request we may as well just go with it. Also be rid of the GFP_ATOMIC allocation: we've got working mempools for the block layer now, so let's save atomic memory for things like networking. Lastly, in get_request_wait, do an initial get_request call before going into the waitqueue. This is reported to help efficiency. Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:34 UTC
69f63c5 KAMBAROV, ZAUR 29 June 2005, 03:45:12 UTC [PATCH] coverity: tty_ldisc_ref return null check We add a check of the return value of tty_ldisc_ref(), which is checked 7 out of 8 times, e.g.: 149 ld = tty_ldisc_ref(tty); 150 if (ld != NULL) { 151 if (ld->set_termios) 152 (ld->set_termios)(tty, &old_termios); 153 tty_ldisc_deref(ld); 154 } This defect was found automatically by Coverity Prevent, a static analysis tool. (akpm: presumably `ld' is never NULL. Oh well) Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:34 UTC
c7f1721 KAMBAROV, ZAUR 29 June 2005, 03:45:11 UTC [PATCH] coverity: fs/ext3/super.c: match_int return check The return value of "match_int" is checked 27 out of 28 times In lib/parser.c 142 /** 143 * match_int: - scan a decimal representation of an integer from a substring_t 144 * @s: substring_t to be scanned 145 * @result: resulting integer on success 146 * 147 * Description: Attempts to parse the &substring_t @s as a decimal integer. On 148 * success, sets @result to the integer represented by the string and returns 0. 149 * Returns either -ENOMEM or -EINVAL on failure. 150 */ 151 int match_int(substring_t *s, int *result) 152 { 153 return match_number(s, result, 0); 154 } Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:34 UTC
ec471dc KAMBAROV, ZAUR 29 June 2005, 03:45:10 UTC [PATCH] coverity: fs/udf/namei.c null check "dir" was dereferenced before null check Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:33 UTC
9c101fd KAMBAROV, ZAUR 29 June 2005, 03:45:08 UTC [PATCH] coverity: ipmi_msghandler() channels array overrun fix We fix the check in 1084, which was 1084 if (addr->channel > IPMI_NUM_CHANNELS) { 1085 spin_lock_irqsave(&intf->counter_lock, flags); 1086 intf->sent_invalid_commands++; 1087 spin_unlock_irqrestore(&intf->counter_lock, flags); 1088 rv = -EINVAL; 1089 goto out_err; 1090 } addr->channel is used in 1092 if (intf->channels[addr->channel].medium Definitions involved: 221 struct ipmi_channel channels[IPMI_MAX_CHANNELS]; 134 #define IPMI_MAX_CHANNELS 8 In /linux-2.6.12-rc6/include/linux/ipmi.h 148 #define IPMI_NUM_CHANNELS 0x10 Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:33 UTC
a77e336 KAMBAROV, ZAUR 29 June 2005, 03:45:06 UTC [PATCH] coverity: i386: scsi_lib buffer overrun fix The check in 627 BUG_ON(index > SG_MEMPOOL_NR); with SG_MEMPOOL_NR defined in 32 #define SG_MEMPOOL_NR (sizeof(scsi_sg_pools)/sizeof(struct scsi_host_sg_pool)) was not sufficient. sgp, set in 629 sgp = scsi_sg_pools + index; is dereferenced in 630 mempool_free(sgl, sgp->pool); Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Cc: <linux-scsi@vger.kernel.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:33 UTC
a8f5034 KAMBAROV, ZAUR 29 June 2005, 03:45:06 UTC [PATCH] coverity: i386: build.c: negative return to unsigned fix Variable "c" was declared as an unsigned int, but used in: 125 for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c ) 126 if (write(1, buf, c) != c) 127 die("Write call failed"); (akpm: read() can return -1. If it does, we fill the disk up with garbage). Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:33 UTC
4cceb4d GOTO Masanori 29 June 2005, 03:45:05 UTC [PATCH] headers: include linux/types.h for usb_ch9.h This patch for usb_ch9.h includes linux/types.h instead of asm/types.h so that __le16 and so on is explicitly defined. It also cleans up non standard // comment. Signed-off-by: GOTO Masanori <gotom@debian.or.jp> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:32 UTC
3607d1d GOTO Masanori 29 June 2005, 03:45:04 UTC [PATCH] headers: include linux/compiler.h for __user This patch lets i2c-dev.h include linux/compiler.h so that __user is defined. Signed-off-by: GOTO Masanori <gotom@debian.or.jp> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:32 UTC
12822bc GOTO Masanori 29 June 2005, 03:45:03 UTC [PATCH] headers: enable ppc64 ___arch__swab16 and ___arch__swab32 This patch cleans up asm-ppc64/byteorder.h to enable ___arch__swab16 and ___arch__swab32 which are marked TODO currently. It removes ___arch__swab64 because ppc64 does not have short instruction combinations for swab64, the recent gcc generates enough smart code that is equivalent to hand assembled code under my tests. Signed-off-by: GOTO Masanori <gotom@debian.or.jp> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:32 UTC
c016e22 S\xe9bastien Dugu 29 June 2005, 03:44:59 UTC [PATCH] aio-retry-fix: fix aio retry work queueing In the case of buffered AIO, in the aio retry path (aio_run_iocb), when the retry method returns EIOCBRETRY the kicked iocb is added to the context run list but is never queued onto the work queue. The request therefore is never completed. This patch fixes that by adding the appropriate call to aio_queue_work in aio_run_aiocb so that subsequent retries will be handled by the aio worker thread. Signed-off-by: S\xe9bastien Dugu\xe9 <sebastien.dugue@bull.net> Acked-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:32 UTC
334a13e Christoph Hellwig 29 June 2005, 03:44:58 UTC [PATCH] really remove xattr_acl.h Looks like it sneaked back with the NFS ACL merge.. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:31 UTC
aade0e8 Adrian Bunk 29 June 2005, 03:44:56 UTC [PATCH] drivers/isdn/: make some code static This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Armin Schindler <armin@melware.de> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:31 UTC
687a21c Pekka J Enberg 29 June 2005, 03:44:55 UTC [PATCH] rename wakeup_bdflush to wakeup_pdflush Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:31 UTC
05133fc Andrew Morton 29 June 2005, 03:44:54 UTC [PATCH] swabb.h warning fixes In file included from drivers/media/dvb/ttpci/av7110_hw.c:38: include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type In file included from drivers/media/dvb/ttpci/av7110_v4l.c:36: include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type In file included from drivers/media/dvb/ttpci/av7110_av.c:37: include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type drivers/isdn/icn/icn.c:719:4: warning: #warning TODO test headroom or use skb->nb to flag ACK In file included from drivers/media/dvb/ttpci/av7110_ca.c:39: include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type In file included from drivers/media/dvb/ttpci/av7110.c:41: include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type Does declaring a function to return a const value actually mean something to gcc? Dunno. Kill it and replace sone `__inline__'s with `inline' too. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:31 UTC
b79646e Andrew Morton 29 June 2005, 03:44:53 UTC [PATCH] hisax warning fixes drivers/isdn/hisax/hfc4s8s_l1.c:317: warning: type qualifiers ignored on function return type drivers/isdn/hisax/hfc4s8s_l1.c:329: warning: type qualifiers ignored on function return type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:30 UTC
b92eac0 Stanislaw W. Gruszka 29 June 2005, 03:44:51 UTC [PATCH] request_firmware(): avoid race conditions Avoid race occurs when some process have open file descriptor for class device attributes and already firmware allocated memory are freed. Don't allow negative loading timeout. Signed-off-by: Stanislaw W. Gruszka <stf_xl@wp.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:30 UTC
bcc8ca0 Emmanuel Colbus 29 June 2005, 03:44:49 UTC [PATCH] Adapt drivers/char/vt_ioctl.c to non-x86 This code uses the x86 (non-AMD-ELAN) value of CLOCK_TICK_RATE instead of CLOCK_TICK_RATE itself, which is wrong for other archs. Signed-off-by: Emmanuel Colbus <emmanuel.colbus@ensimag.imag.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:30 UTC
f01b1b0 Oleg Nesterov 29 June 2005, 03:44:47 UTC [PATCH] ITIMER_REAL: fix possible deadlock and race As Steven Rostedt pointed out, there are 2 problems with ITIMER_REAL timers. 1. do_setitimer() does not call del_timer_sync() in case when the timer is not pending (it_real_value() returns 0). This is wrong, the timer may still be running, and it can rearm itself. 2. It calls del_timer_sync() with tsk->sighand->siglock held. This is deadlockable, because timer's handler needs this lock too. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:30 UTC
b36bbb6 Lennert Buytenhek 29 June 2005, 03:44:46 UTC [PATCH] ixp4xx/ixp2000 watchdog driver typo Fix the same typo in the ixp4xx and ixp2000 watchdog drivers. Signed-off-by: Lennert Buytenhek <buytenh+lkml@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:29 UTC
45ae36c Luc Van Oostenryck 29 June 2005, 03:44:44 UTC [PATCH] drivers/char/tipar.c: off by one array access In the setup function, the delay variable is initialized with ints[2], but ints is declared as: int ints[2]; Since the module parameter should correspond to: tipar=timeout,delay I suppose that the following patch fix the problem. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:29 UTC
47f176f Luca Falavigna 29 June 2005, 03:44:42 UTC [PATCH] Using msleep() instead of HZ Use msleep() in a few places. Signed-off-by: Luca Falavigna <dktrkranz@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:29 UTC
8d45168 Wen-chien Jesse Sung 29 June 2005, 03:44:41 UTC [PATCH] fix semaphore handling in __unregister_chrdev_region This up() should be down() instead. Signed-off-by: Wen-chien Jesse Sung <jesse@cola.voip.idv.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 29 June 2005, 04:20:29 UTC
12dc2fd David S. Miller 28 June 2005, 23:27:32 UTC [NET]: drivers/net/slip.c needs linux/delay.h For msleep_interruptible(). Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 23:27:32 UTC
9666dae Patrick McHardy 28 June 2005, 23:04:44 UTC [NETFILTER]: Fix connection tracking bug in 2.6.12 In 2.6.12 we started dropping the conntrack reference when a packet leaves the IP layer. This broke connection tracking on a bridge, because bridge-netfilter defers calling some NF_IP_* hooks to the bridge layer for locally generated packets going out a bridge, where the conntrack reference is no longer available. This patch keeps the reference in this case as a temporary solution, long term we will remove the defered hook calling. No attempt is made to drop the reference in the bridge-code when it is no longer needed, tc actions could already have sent the packet anywhere. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 23:04:44 UTC
bcd6127 Arnd Bergmann 28 June 2005, 22:58:50 UTC [NET]: Add missing include to linux/netdevice.h linux/etherdevice.h can't be included standalone at the moment, which is required in order to sort the header files in the recommended alphabetic order. This patch fixes that and is needed to build spider_net. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 22:58:50 UTC
ff593c5 Denis Vlasenko 28 June 2005, 22:49:06 UTC [NET]: Micro optimization in eth_header() Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 22:49:06 UTC
7fe40f7 YOSHIFUJI Hideaki 28 June 2005, 22:46:24 UTC [IPV6]: remove more unused IPV6_AUTHHDR things. Remove two more unused IPV6_AUTHHDR option things, which I failed to remove them last time, plus, mark IPV6_AUTHHDR obsolete. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 22:46:24 UTC
fb3d894 Neil Horman 28 June 2005, 22:40:02 UTC [IPVS]: Close race conditions on ip_vs_conn_tab list modification In an smp system, it is possible for an connection timer to expire, calling ip_vs_conn_expire while the connection table is being flushed, before ct_write_lock_bh is acquired. Since the list iterator loop in ip_vs_con_flush releases and re-acquires the spinlock (even though it doesn't re-enable softirqs), it is possible for the expiration function to modify the connection list, while it is being traversed in ip_vs_conn_flush. The result is that the next pointer gets set to NULL, and subsequently dereferenced, resulting in an oops. Signed-off-by: Neil Horman <nhorman@redhat.com> Acked-by: JulianAnastasov Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 22:40:02 UTC
689be43 David S. Miller 28 June 2005, 22:25:31 UTC [NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com> 28 June 2005, 22:25:31 UTC
f835e47 Robert Olsson 28 June 2005, 22:00:39 UTC [IPV4]: Broken memory allocation in fib_trie This should help up the insertion... but the resize is more crucial. and complex and needs some thinking. Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 22:00:39 UTC
7e568e6 Linus Torvalds 28 June 2005, 22:00:08 UTC Merge master.kernel.org:/home/rmk/linux-2.6-arm 28 June 2005, 22:00:08 UTC
adb2705 Linus Torvalds 28 June 2005, 21:59:07 UTC Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 28 June 2005, 21:59:07 UTC
f340c0d Ingo Molnar 28 June 2005, 14:40:42 UTC [PATCH] Tweak idle thread setup semantics This patch tweaks idle thread setup semantics a bit: instead of setting NEED_RESCHED in init_idle(), we do an explicit schedule() before calling into cpu_idle(). This patch, while having no negative side-effects, enables wider use of cond_resched()s. (which might happen in the stock kernel too, but it's particulary important for voluntary-preempt) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 28 June 2005, 21:56:51 UTC
082cf69 Jens Axboe 28 June 2005, 14:35:11 UTC [PATCH] ll_rw_blk: prevent huge request allocations Currently we cap request allocations at q->nr_requests, but we allow a batching io context to allocate up to 32 more (default setting). This can flood the queue with request allocations, with only a few batching processes. The real fix would be to limit the number of batchers, but as that isn't currently tracked, I suggest we just cap the maximum number of allocated requests to eg 50% over the limit. This was observed in real life, users typically see this as vmstat bo numbers going off the wall with seconds of no queueing afterwards. Behaviour this bursty is not beneficial. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 28 June 2005, 21:56:50 UTC
f8b58ed Neil Brown 28 June 2005, 05:29:34 UTC [PATCH] md: bio leak fix insert a missing bio_put when writting the md superblock. Without this we have a steady growth in the "bio" slab. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 28 June 2005, 21:53:41 UTC
314b6a4 Alexey Dobriyan 28 June 2005, 05:29:33 UTC [PATCH] kexec: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 28 June 2005, 21:53:40 UTC
97afa0a Andrew Morton 28 June 2005, 05:29:31 UTC [PATCH] cciss_ioctl() warning fix Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 28 June 2005, 21:53:40 UTC
5027397 Ben Dooks 28 June 2005, 21:42:06 UTC [PATCH] ARM: 2763/1: S3C24XX - mark IRQ_LCD as valid Patch from Ben Dooks Fix the IRQ_LCD so that it is marked as valid since we no longer de-mux this in the main IRQ handler. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 June 2005, 21:42:06 UTC
2f85a42 Vlad Yasevich 28 June 2005, 20:24:23 UTC [SCTP] Make init & delayed sack timeouts configurable by user. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 20:24:23 UTC
7a1af5d Maxime Bizon 28 June 2005, 20:21:12 UTC [IPV4]: ipconfig.c: fix dhcp timeout behaviour I think there is a small bug in ipconfig.c in case IPCONFIG_DHCP is set and dhcp is used. When a DHCPOFFER is received, ip address is kept until we get DHCPACK. If no ack is received, ic_dynamic() returns negatively, but leaves the offered ip address in ic_myaddr. This makes the main loop in ip_auto_config() break and uses the maybe incomplete configuration. Not sure if it's the best way to do, but the following trivial patch correct this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 20:21:12 UTC
2c2910a Dietmar Eggemann 28 June 2005, 20:06:23 UTC [IPV4]: Snmpv2 Mib IP counter ipInAddrErrors support I followed Thomas' proposal to see every martian destination as a case where the ipInAddrErrors counter has to be incremented. There are two advantages by doing so: (1) The relation between the ipInReceive counter and all the other ipInXXX counters is more accurate in the case the RTN_UNICAST code check fails and (2) it makes the code in ip_route_input_slow easier. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 20:06:23 UTC
f2be64b Tony Lindgren 28 June 2005, 20:01:16 UTC [PATCH] ARM: 2760/1: Add a warning on dynamic tick timekeeping on some platforms Patch from Tony Lindgren This patch was suggested by RMK, and adds a warning on the accuracy of timekeeping when using dynamic tick on some platforms. Depending on the timer implementation, dynamic tick may affect the accuracy of timekeeping. Currently at least OMAP is known to have accurate timekeeping with dynamic tick. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 June 2005, 20:01:16 UTC
072cd70 Ben Dooks 28 June 2005, 20:01:03 UTC [PATCH] ARM: 2762/1: S3C24XX Audio platform data Patch from Ben Dooks This provides the s3c24xx audio platform data which can be supplied from any of the board specific drivers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 June 2005, 20:01:03 UTC
fa0ebff Richard Purdie 28 June 2005, 20:01:03 UTC [PATCH] ARM: 2761/1: OProfile: Add call graphing support for arm Patch from Richard Purdie Add functions to generate backtraces of both kernel and user processes which allows oprofile's call graphing functionality to be used on arm. This requires unstripped binaries/libs which use a frame pointer. Signed-off-by: Richard Purdie Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 June 2005, 20:01:03 UTC
ae9cda5 YOSHIFUJI Hideaki 28 June 2005, 20:00:30 UTC [IPV6]: Don't dump temporary addresses twice Each IPv6 Temporary Address (w/ CONFIG_IPV6_PRIVACY) is dumped twice to netlink. Because temporary addresses are listed in idev->addr_list, there's no need to dump idev->tempaddr separately. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 20:00:30 UTC
8a47077 Patrick McHardy 28 June 2005, 19:56:45 UTC [NETLINK]: Missing padding fields in dumped structures Plug holes with padding fields and initialized them to zero. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 19:56:45 UTC
9ef1d4c Patrick McHardy 28 June 2005, 19:55:30 UTC [NETLINK]: Missing initializations in dumped data Mostly missing initialization of padding fields of 1 or 2 bytes length, two instances of uninitialized nlmsgerr->msg of 16 bytes length. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 19:55:30 UTC
b3563c4 Patrick McHardy 28 June 2005, 19:54:43 UTC [NETLINK]: Clear padding in netlink messages Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 19:54:43 UTC
4095ebf Harald Welte 28 June 2005, 19:49:30 UTC [NETFILTER]: ipt_CLUSTERIP: fix ARP mangling This patch adds mangling of ARP requests (in addition to replies), since ARP caches are made from snooping both requests and replies. Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 19:49:30 UTC
85c1937 David S. Miller 28 June 2005, 19:39:40 UTC [EBTABLES]: Fix thinkos in ebt_log.c When converting over the skb_header_pointer(), I converted parts of this module incorrectly. Kill the 'u' union in ebt_log() and all the bogus references to it. Signed-off-by: David S. Miller <davem@davemloft.net> 28 June 2005, 19:39:40 UTC
61998bc Linus Torvalds 28 June 2005, 17:20:11 UTC Merge head 'upstream-20050628-1' of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev 28 June 2005, 17:20:11 UTC
8644d2a Greg KH 28 June 2005, 05:07:56 UTC Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 28 June 2005, 05:07:56 UTC
1cde8a1 Greg Kroah-Hartman 24 June 2005, 00:35:56 UTC [PATCH] PCI: use the MCFG table to properly access pci devices (x86-64) Now that we have access to the whole MCFG table, let's properly use it for all pci device accesses (as that's what it is there for, some boxes don't put all the busses into one entry.) If, for some reason, the table is incorrect, we fallback to the "old style" of mmconfig accesses, namely, we just assume the first entry in the table is the one for us, and blindly use it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:48 UTC
d57e26c Greg Kroah-Hartman 24 June 2005, 00:35:56 UTC [PATCH] PCI: use the MCFG table to properly access pci devices (i386) Now that we have access to the whole MCFG table, let's properly use it for all pci device accesses (as that's what it is there for, some boxes don't put all the busses into one entry.) If, for some reason, the table is incorrect, we fallback to the "old style" of mmconfig accesses, namely, we just assume the first entry in the table is the one for us, and blindly use it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:47 UTC
5454939 Greg Kroah-Hartman 24 June 2005, 00:35:56 UTC [PATCH] PCI: add proper MCFG table parsing to ACPI core. This patch is the first step in properly handling the MCFG PCI table. It defines the structures properly, and saves off the table so that the pci mmconfig code can access it. It moves the parsing of the table a little later in the boot process, but still before the information is needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:47 UTC
d18c3db Greg Kroah-Hartman 24 June 2005, 00:35:56 UTC [PATCH] PCI: make drivers use the pci shutdown callback instead of the driver core callback. Now we can change the pci core to always set this pointer, as pci drivers should use it, not the driver core callback. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:47 UTC
4002307 Keith Moore 02 June 2005, 10:42:37 UTC [PATCH] cpqphp: fix oops during unload without probe drivers/pci/hotplug/cpqphp_core.c calls cpqphp_event_start_thread() in one_time_init(), which is called whenever the hardware is probed. Unfortunately, cpqphp_event_stop_thread() is *always* called when the module is unloaded. If the hardware is never probed, then cpqphp_event_stop_thread() tries to manipulate a couple of uninitialized mutexes. Signed-off-by: Keith Moore <keithmo@exmsft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:46 UTC
70549ad Greg Kroah-Hartman 07 June 2005, 06:07:46 UTC [PATCH] PCI: clean up the MSI code a bit. Mostly just cleans up the irq handling logic to be smaller and a bit more descriptive as to what it really does. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:46 UTC
bb4a61b Andrew Morton 07 June 2005, 06:07:46 UTC [PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n With CONFIG_PCI=n: In file included from include/linux/pci.h:917, from lib/iomap.c:6: include/asm/pci.h:104: warning: `enum pci_dma_burst_strategy' declared inside parameter list include/asm/pci.h:104: warning: its scope is only this definition or declaration, which is probably not what you want. include/asm/pci.h: In function `pci_dma_burst_advice': include/asm/pci.h:106: dereferencing pointer to incomplete type include/asm/pci.h:106: `PCI_DMA_BURST_INFINITY' undeclared (first use in this function) include/asm/pci.h:106: (Each undeclared identifier is reported only once include/asm/pci.h:106: for each function it appears in.) make[1]: *** [lib/iomap.o] Error 1 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:46 UTC
e24c2d9 David S. Miller 02 June 2005, 19:55:50 UTC [PATCH] PCI: DMA bursting advice After seeing, at best, "guesses" as to the following kind of information in several drivers, I decided that we really need a way for platforms to specifically give advice in this area for what works best with their PCI controller implementation. Basically, this new interface gives DMA bursting advice on PCI. There are three forms of the advice: 1) Burst as much as possible, it is not necessary to end bursts on some particular boundary for best performance. 2) Burst on some byte count multiple. A DMA burst to some multiple of number of bytes may be done, but it is important to end the burst on an exact multiple for best performance. The best example of this I am aware of are the PPC64 PCI controllers, where if you end a burst mid-cacheline then chip has to refetch the data and the IOMMU translations which hurts performance a lot. 3) Burst on a single byte count multiple. Bursts shall end exactly on the next multiple boundary for best performance. Sparc64 and Alpha's PCI controllers operate this way. They disconnect any device which tries to burst across a cacheline boundary. Actually, newer sparc64 PCI controllers do not have this behavior. That is why the "pdev" is passed into the interface, so I can add code later to check which PCI controller the system is using and give advice accordingly. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:45 UTC
2311b1f Michael Ellerman 13 May 2005, 07:44:10 UTC [PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch which is in 2.6.12-rc4-mm1. It fixes the patch to work on PPC iSeries, removes some debug printks at Ben's request, and incorporates your fix-pci-mmap-on-ppc-and-ppc64-fix.patch also. Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org> This patch was discussed at length on linux-pci and so far, the last iteration of it didn't raise any comment. It's effect is a nop on architecture that don't define the new pci_resource_to_user() callback anyway. It allows architecture like ppc who put weird things inside of PCI resource structures to convert to some different value for user visible ones. It also fixes mmap'ing of IO space on those archs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:45 UTC
a0d399a Kenji Kaneshige 28 April 2005, 07:25:59 UTC [PATCH] ACPI based I/O APIC hot-plug: acpiphp support This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs under the root bridge are hot-added by this patch. Hot-remove support is TBD. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:45 UTC
0e888ad Kenji Kaneshige 28 April 2005, 07:25:58 UTC [PATCH] ACPI based I/O APIC hot-plug: ia64 support This is an ia64 implementation of acpi_register_ioapic() and acpi_unregister_ioapic() interfaces. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:44 UTC
b1bb248 Kenji Kaneshige 28 April 2005, 07:25:58 UTC [PATCH] ACPI based I/O APIC hot-plug: add interfaces This patch adds the following new interfaces for I/O xAPIC hotplug. The implementation of these interfaces depends on each architecture. o int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); This new interface is to add a new I/O xAPIC specified by phys_addr and gsi_base pair. phys_addr is the physical address to which the I/O xAPIC is mapped and gsi_base is global system interrupt base of the I/O xAPIC. acpi_register_ioapic returns 0 on success, or negative value on error. o int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); This new interface is to remove a I/O xAPIC specified by gsi_base. acpi_unregister_ioapic returns 0 on success, or negative value on error. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:44 UTC
8d50e33 Rajesh Shah 28 April 2005, 07:25:57 UTC [PATCH] acpi hotplug: decouple slot power state changes from physical hotplug Current acpiphp code does not distinguish between the physical presence and power state of a device/slot. That is, if a device has to be disabled, it also tries to physically ejects the device. This patch decouples power state from physical presence. You can now echo to the corresponding sysfs power control file to repeatedly enable and disable a device without having to physically re-insert it. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:43 UTC
8e7561c Rajesh Shah 28 April 2005, 07:25:56 UTC [PATCH] acpi hotplug: aCPI based root bridge hot-add acpiphp changes to support acpi based root bridge hot-add. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:43 UTC
2f523b1 Rajesh Shah 28 April 2005, 07:25:55 UTC [PATCH] acpi hotplug: fix slot power-down problem with acpiphp Earlier I reported that Matthew's acpiphp rewrite had problem in powering down slot on my i386 system. The following patch is needed to get the acpiphp rewrite properly powering down the slot. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:43 UTC
364d509 Rajesh Shah 28 April 2005, 07:25:54 UTC [PATCH] acpi hotplug: clean up notify handlers on acpiphp unload A root bridge may not have directly attached hotpluggable slots under it. Instead, it may have p2p bridges with slots under it. In this case, we need to clean up the p2p bridges and slots properly too. Patch below applies on top of the original patch, and fixes this problem. Without this, acpiphp leaves behind notify handlers on module unload, and subsequent module load attempts don't work properly too. Patch was tested on an ia64 Tiger4 box. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:42 UTC
42f49a6 Rajesh Shah 28 April 2005, 07:25:53 UTC [PATCH] acpi hotplug: convert acpiphp to use generic resource code This patch converts acpiphp to use the generic PCI resource assignment code. It's quite large, but most of it is deleting the acpiphp_pci and acpiphp_res files. It's tested on an hp Integrity rx8620 (which won't work without this patch). Testers with other hardware welcomed. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:42 UTC
4ce448e Rajesh Shah 28 April 2005, 07:25:53 UTC [PATCH] acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle Export an acpi interface to get PCI domain/bus/devfn information from the corresponding namespace handle. Used by acpiphp code to transpate the device handle of the hot-plugged root bridge to the corresponding pci location information. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:42 UTC
3fb0273 Rajesh Shah 28 April 2005, 07:25:52 UTC [PATCH] acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently Create new interfaces to recursively add an acpi namespace object to the acpi device list, and recursively start the namespace object. This is needed for ACPI based hotplug of a root bridge hierarchy where the add operation must be performed first and the start operation must be performed separately after the hot-plugged devices have been properly configured. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:42 UTC
f7d473d Rajesh Shah 28 April 2005, 07:25:51 UTC [PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus Read bridge io/mem/pfmem ranges when fixing up the bus so that bus resources are tracked. This is required to properly support pci end device and bridge hotplug. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:41 UTC
542df5d Rajesh Shah 28 April 2005, 07:25:50 UTC [PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources When hot-plugging an I/O hierarchy that contains many bridges and leaf devices, it's possible that there are not enough resources to start all the device present. If we fail to assign a resource, clear the corresponding value in the pci_dev structure, so other code can take corrective action. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:41 UTC
091ca9f Rajesh Shah 28 April 2005, 07:25:49 UTC [PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug When a root bridge hierarchy is hot-plugged, resource requirements for the new devices may be greater than what the root bridge is decoding. In this case, we want to remove devices that did not get needed resources. These devices have been scanned into bus specific lists but not yet added to the global device list. Make sure the pci remove functions can handle this case. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:41 UTC
6ef6f0e Rajesh Shah 28 April 2005, 07:25:49 UTC [PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent on creation When a pci child bus is created, add it to the parent's children list immediately rather than waiting till pci_bus_add_devices(). For hot-plug bridges/devices, pci_bus_add_devices() may be called much later, after they have been properly configured. In the meantime, this allows us to use the normal pci bus search functions for the hot-plug bridges/buses. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:40 UTC
e4ea9bb Rajesh Shah 28 April 2005, 07:25:48 UTC [PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists With root bridge and pci bridge hot-plug, new buses and devices can be added or removed at run time. Protect the pci bus and device lists with the pci lock when doing so. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:40 UTC
cc57450 Rajesh Shah 28 April 2005, 07:25:47 UTC [PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge When hot-plugging a root bridge, as we try to assign bus numbers we may find that the hotplugged hieratchy has more PCI to PCI bridges (i.e. bus requirements) than available. Make sure we don't step over an existing bus when that happens. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:40 UTC
71c3511 Rajesh Shah 28 April 2005, 07:25:46 UTC [PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans a new bridge. For root bridge hot-plug, the bridge and it's attached devices may not have been configured properly yet, so it's not safe to claim those resources at this time. This code goes away when we clean up the way pci resources are claimed (in pci_enable_device()), so this is only a stopgap fix. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:39 UTC
fab3fb0 Rajesh Shah 28 April 2005, 07:25:45 UTC [PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges When checking if a PCI to PCI bridge should be enabled to decode memory and/or IO resources, we need to look at all device resources not just the first 6. This is needed to allow PCI bridges to pass down memory and IO accesses to child devices even when the bridge itself does not consume resources in its PCI BARs. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:39 UTC
c431ada Rajesh Shah 28 April 2005, 07:25:45 UTC [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and devices attached to it that have not been configured by firmware. In this case, we need to configure the devices before starting them. This patch separates device start from device scan so that we can introduce the configuration step in the middle. I kept the existing semantics for pci_scan_bus() since there are a huge number of callers to that function. Also, I have no way of testing the changes I made to the parisc files, so this needs review by those folks. Sorry for the massive cross-post, this touches files in many different places. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:39 UTC
efe1ec2 Amit Gud 12 April 2005, 13:34:27 UTC [PATCH] pci: remove deprecates Replace pci_find_device() with more safer pci_get_device(). Signed-off-by: Amit Gud <gud@eth.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:38 UTC
881a8c1 Amit Gud 12 April 2005, 13:33:33 UTC [PATCH] pci: remove deprecates Replace pci_find_device() with more safer pci_get_device(). Signed-off-by: Amit Gud <gud@eth.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:38 UTC
120bb42 jayalk@intworks.biz 22 March 2005, 04:20:42 UTC [PATCH] PCI Allow OutOfRange PIRQ table address I updated this to remove unnecessary variable initialization, make check_routing be inline only and not __init, switch to strtoul, and formatting fixes as per Randy Dunlap's recommendations. I updated this to change pirq_table_addr to a long, and to add a warning msg if the PIRQ table wasn't found at the specified address, as per thread with Matthew Wilcox. In our hardware situation, the BIOS is unable to store or generate it's PIRQ table in the F0000h-100000h standard range. This patch adds a pci kernel parameter, pirqaddr to allow the bootloader (or BIOS based loader) to inform the kernel where the PIRQ table got stored. A beneficial side-effect is that, if one's BIOS uses a static address each time for it's PIRQ table, then pirqaddr can be used to avoid the $pirq search through that address block each time at boot for normal PIRQ BIOSes. Signed-off-by: Jaya Kumar <jayalk@intworks.biz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 28 June 2005, 04:52:38 UTC
c36ad39 Jeff Garzik 28 June 2005, 04:46:22 UTC Merge /spare/repo/linux-2.6/ 28 June 2005, 04:46:22 UTC
back to top