https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
60d4684 Linux v2.6.18-rc5 28 August 2006, 03:41:48 UTC
01da5fd [PATCH] Fix tty layer DoS and comment relevant code Unlike the other tty comment patch this one has code changes. Specifically it limits the queue size for a tty to 64K characters (128Kbytes) worst case even if the tty is ignoring tty->throttle. This is because certain drivers don't honour the throttle value correctly, although it is a useful safeguard anyway. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:34 UTC
af9b897 [PATCH] tty layer comment the locking assumptions and functions somewhat Doesn't fix them but does show up some interesting areas that need review and fixing. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:34 UTC
9c275a8 [PATCH] cdrom/gdsc: fix printk format warning Fix printk format warning: drivers/cdrom/gscd.c:269: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:33 UTC
38e716a [PATCH] x86: NUMAQ Kconfig fix When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:33 UTC
f5ef68d [PATCH] /proc/meminfo: don't put spaces in names None of the other /proc/meminfo lines have a space in the identifier. This post-2.6.17 addition has the potential to break existing parsers, so use an underscore instead (like Committed_AS). Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:33 UTC
513627d [PATCH] fix up lockdep trace in fs/exec.c This fixes the locking error noticed by lockdep: ============================================= [ INFO: possible recursive locking detected ] --------------------------------------------- init/1 is trying to acquire lock: (&sighand->siglock){....}, at: [<c047a78a>] flush_old_exec+0x3ae/0x859 but task is already holding lock: (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859 other info that might help us debug this: 2 locks held by init/1: #0: (tasklist_lock){..--}, at: [<c047a76a>] flush_old_exec+0x38e/0x859 #1: (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859 stack backtrace: [<c04051e1>] show_trace_log_lvl+0x54/0xfd [<c040579d>] show_trace+0xd/0x10 [<c04058b6>] dump_stack+0x19/0x1b [<c043b33a>] __lock_acquire+0x773/0x997 [<c043bacf>] lock_acquire+0x4b/0x6c [<c060630b>] _spin_lock+0x19/0x28 [<c047a78a>] flush_old_exec+0x3ae/0x859 [<c0498053>] load_elf_binary+0x4aa/0x1628 [<c0479cab>] search_binary_handler+0xa7/0x24e [<c047b577>] do_execve+0x15b/0x1f9 [<c04022b4>] sys_execve+0x29/0x4d [<c0403faf>] syscall_call+0x7/0xb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
4df4624 [PATCH] lockdep: annotate reiserfs reiserfs seems to have another locking level layer for the i_mutex due to the xattrs-are-a-directory thing. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
36e8e57 [PATCH] lockdep: annotate idescsi_pc_intr() idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it. (this has no effect on kernels with lockdep disabled. On kernels with lockdep enabled this means that we wont actually disable interrupts, and the warning message will go away as well.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
4e54bda [PATCH] CONFIG_ACPI_SRAT NUMA build fix In file included from include/asm/mmzone.h:18, from include/linux/mmzone.h:439, <snip> include/asm/srat.h:31:2: error: #error CONFIG_ACPI_SRAT not defined, and srat.h header has been included make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1 This can happen with CONFIG_NUMA && !CONFIG_ACPI && !CONFIG_X86_NUMAQ Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
0d673a5 [PATCH] cpuset: oom panic fix cpuset_excl_nodes_overlap always returns 0 if current is exiting. This caused customer's systems to panic in the OOM killer when processes were having trouble getting memory for the final put_user in mm_release. Even though there were lots of processes to kill. Change to returning 1 in this case. This achieves parity with !CONFIG_CPUSETS case, and was observed to fix the problem. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
36920e0 [PATCH] register_one_node() compile fix register_one_node()'s should be defined under CONFIG_NUMA=n. fixes following bug. CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 mm/built-in.o: In function `add_memory': undefined reference to `register_one_node' Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
ea81739 [PATCH] Manage jbd allocations from its own slabs JBD currently allocates commit and frozen buffers from slabs. With CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page boundary causing IO problems. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127 So, instead of allocating these from regular slabs - manage allocation from its own slabs and disable slab debug for these slabs. [akpm@osdl.org: cleanups] Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
4c4d50f [PATCH] cpuset: top_cpuset tracks hotplug changes to cpu_online_map Change the list of cpus allowed to tasks in the top (root) cpuset to dynamically track what cpus are online, using a CPU hotplug notifier. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support CPU hotplug, then these tasks cannot make use of CPUs that are added after system boot, because the CPUs are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'cpus' file in the top (root) cpuset, making it read only, and making it automatically track the value of cpu_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged CPUs allowed by their cpuset. Thanks to Anton Blanchard and Nathan Lynch for reporting this problem, driving the fix, and earlier versions of this patch. Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Nathan Lynch <ntl@pobox.com> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:32 UTC
6394cca [PATCH] md: fix recent breakage of md/raid1 array checking A recent patch broke the ability to do a user-request check of a raid1. This patch fixes the breakage and also moves a comment that was dislocated by the same patch. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
8469219 [PATCH] md: avoid backward event updates in md superblock when degraded. If we - shut down a clean array, - restart with one (or more) drive(s) missing - make some changes - pause, so that they array gets marked 'clean', the event count on the superblock of included drives will be the same as that of the removed drives. So adding the removed drive back in will cause it to be included with no resync. To avoid this, we only update the eventcount backwards when the array is not degraded. In this case there can (should) be no non-connected drives that we can get confused with, and this is the particular case where updating-backwards is valuable. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
45f17e0 [PATCH] eventpoll.c compile fix Fix two compile failures in eventpoll.c code which would happen if DEBUG_EPOLL is bigger than zero. Signed-off-by: Masoud Sharbiani <masouds@google.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
e88d78f [PATCH] Documentation update for relay interface Here's updated documentation for the relay interface, rewritten to match the relayfs->relay changes. It also moves relayfs.txt to relay.txt in the process. It includes the changes to relayfs.txt previously posted by Randy Dunlap, thanks for those. The relay-apps examples have also been updated to match, and can be found on the sourceforge relayfs website. Signed-off-by: Tom Zanussi <zanussi@us.ibm.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
4edb9a1 [PATCH] Remove redundant up() in stop_machine() An up() is called in kernel/stop_machine.c on failure, and also in the caller (unconditionally). Signed-off-by: Zhou Yingchao <yingchao.zhou@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
ecdc639 [PATCH] ufs: truncate correction 1) When we allocated last fragment in ufs_truncate, we read page, check if block mapped to address, and if not trying to allocate it. This is wrong behaviour, fragment may be NOT allocated, but mapped, this happened because of "block map" function not checked allocated fragment or not, it just take address of the first fragment in the block, add offset of fragment and return result, this is correct behaviour in almost all situation except call from ufs_truncate. 2) Almost all implementation of UFS, which I can investigate have such "defect": if you have full disk, and try truncate file, for example 3GB to 2MB, and have hole in this region, truncate return -ENOSPC. I tried evade from this problem, but "block allocation" algorithm is tied to right value of i_lastfrag, and fix of this corner case may slow down of ordinaries scenarios, so this patch makes behavior of "truncate" operations similar to what other UFS implementations do. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
c37336b [PATCH] ufs: write to hole in big file On UFS, this scenario: open(O_TRUNC) lseek(1024 * 1024 * 80) write("A") lseek(1024 * 2) write("A") may cause access to invalid address. This happened because of "goal" is calculated in wrong way in block allocation path, as I see this problem exists also in 2.4. We use construction like this i_data[lastfrag], i_data array of pointers to direct blocks, indirect and so on, it has ceratain size ~20 elements, and lastfrag may have value for example 40000. Also this patch fixes related to handling such scenario issues, wrong zeroing metadata, in case of block(not fragment) allocation, and wrong goal calculation, when we allocate block Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:31 UTC
08fb306 [PATCH] ext3 filesystem bogus ENOSPC with reservation fix To handle the earlier bogus ENOSPC error caused by filesystem full of block reservation, current code falls back to non block reservation, starts to allocate block(s) from the goal allocation block group as if there is no block reservation. Current code needs to re-load the corresponding block group descriptor for the initial goal block group in this case. The patch fixes this. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:30 UTC
607eb26 [PATCH] ext2: prevent div-by-zero on corrupted fs Mounting an ext2 filesystem with zero s_inodes_per_group will cause a divide error. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:30 UTC
f5fb09f [PATCH] Fix for minix crash Mounting a (corrupt) minix filesystem with zero s_zmap_blocks gives a spectacular crash on my 2.6.17.8 system, no doubt because minix/inode.c does an unconditional minix_set_bit(0,sbi->s_zmap[0]->b_data); [akpm@osdl.org: make labels conistent while we're there] Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:30 UTC
fb8d81e [PATCH] MTD NAND: Fix ams-delta after core conversion The recent hwctrl core conversion for MTD NAND devices broke the Amstrad Delta driver. This fixes it up and uses the existing control line defines rather than unclear magic numbers. Signed-off-by: Jonathan McDowell <noodles@earth.li> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:30 UTC
d015bae [PATCH] futex_find_get_task(): remove an obscure EXIT_ZOMBIE check futex_find_get_task: if (p->state == EXIT_ZOMBIE || p->exit_state == EXIT_ZOMBIE) return NULL; I can't understand this. First, p->state can't be EXIT_ZOMBIE. The ->exit_state check looks strange too. Sub-threads or tasks whose ->parent ignores SIGCHLD go directly to EXIT_DEAD state (I am ignoring a ptrace case). Why EXIT_DEAD tasks should be ok? Yes, EXIT_ZOMBIE is more important (a task may stay zombie for a long time), but this doesn't mean we should explicitely ignore other EXIT_XXX states. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:30 UTC
533475d [PATCH] vcsa attribute bits -> ioctl(VT_GETHIFONTMASK) When reading /dev/vcsa while a font with more than 256 characters is loaded, one of the attribute bits records the 9th bit of the character. But depending on the console driver (vgacon or fbcon for instance), that's bit 3 or bit 0. And there is no way for userland to know that, thus no way for userland to safely grab the screen content. So here is a (tested) patch: Add a VT_GETHIFONTMASK ioctl for knowing which bit is the 9th bit for VC text (vc_hi_font_mask field of the vc_data structure). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
b8cf368 [PATCH] matroxfb: fix jittery display on non-ppc systems I wish I was happier about this patch. It'll serve as a placeholder for the moment. I'm still trying to get a G550 working in order to even reproduce the problem this patch introduces. I find that the G450 has jitter even without this patch, so it won't show me what the patch changed. At this point, I'll continue trying to get the G550 to work, and in parallel work with the G450 to work out the kinks. The patch is below. Set XDVICLKCTRL only on PPC, as doing this apparently introduces jitter on the G550, at least on x86 architectures. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
01cfaf0 [PATCH] char/moxa.c: fix endianess and multiple-card issues While testing Moxa C218T/PCI on PowerPC 405EP I found that loading firmware using the linux kernel driver fails because calculation of the checksum is not endianess independent in the original code. After I fixed this I found that uploading firmware in a system with multiple cards causes a kernel oops. I had a look in the recent moxa sources and found that they do some kind of locking there. Applying this lock fixed the problem. Alan sayeth: Checksum changes are clearly correct. Other changes is an improvement but not I think enough to handle malicious firmware attacks. That said such an attacker has CAP_SYS_RAWIO anyway so that part is irrelevant except for neatness. [akpm@osdl.org: cleanups] Signed-off-by: Dirk Eibach <eibach@gdsys.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
a0cc621 [PATCH] cpufreq: acpi-cpufreq: Ignore failure from acpi_cpufreq_early_init_acpi Ignore the return value of early_init_acpi(), as it can give false error messages. If there is something really wrong, then register_driver will fail cleanly with EINVAL later. [ background: modprobe acpi-cpufreq on systems not capable of speed-scaling started failing with 'invalid argument', where previously it would only ever -ENODEV I'm not 100% happy with the solution. It'd be better to handle failure properly, but this is a low-impact change for 2.6.18 We can always revisit doing this better in .19 --davej.] Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
f8986c2 [PATCH] revert "Drop tasklist lock in do_sched_setscheduler" sched_setscheduler() looks at ->signal->rlim[]. It is unsafe do dereference ->signal unless tasklist_lock or ->siglock is held (or p == current). We pin the task structure, but this can't prevent from release_task()->__exit_signal() which sets ->signal = NULL. Restore tasklist_lock across the setscheduler call. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
cb3e0fe [PATCH] x86: Fix dmi detection of MacBookPro and iMac Commit b64ef8afa58f397e1eaba2bd9ecaa6812064d464 ("[PATCH] add imacfb documentation and detection") contained a wrong DMI_MATCH. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
7fd5aec [PATCH] mtd corruption fix Read the return value before we release the nand device otherwise the value can become corrupted by another user of chip->ops, ultimately resulting in filesystem corruption. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
6946bd6 [PATCH] lockdep: fix blkdev_open() warning On Wed, 2006-08-09 at 07:57 +0200, Rolf Eike Beer wrote: > ============================================= > [ INFO: possible recursive locking detected ] > --------------------------------------------- > parted/7929 is trying to acquire lock: > (&bdev->bd_mutex){--..}, at: [<c105eb8d>] __blkdev_put+0x1e/0x13c > > but task is already holding lock: > (&bdev->bd_mutex){--..}, at: [<c105eec6>] do_open+0x72/0x3a8 > > other info that might help us debug this: > 1 lock held by parted/7929: > #0: (&bdev->bd_mutex){--..}, at: [<c105eec6>] do_open+0x72/0x3a8 > stack backtrace: > [<c1003aad>] show_trace_log_lvl+0x58/0x15b > [<c100495f>] show_trace+0xd/0x10 > [<c1004979>] dump_stack+0x17/0x1a > [<c102dee5>] __lock_acquire+0x753/0x99c > [<c102e3b0>] lock_acquire+0x4a/0x6a > [<c1204501>] mutex_lock_nested+0xc8/0x20c > [<c105eb8d>] __blkdev_put+0x1e/0x13c > [<c105ecc4>] blkdev_put+0xa/0xc > [<c105f18a>] do_open+0x336/0x3a8 > [<c105f21b>] blkdev_open+0x1f/0x4c > [<c1057b40>] __dentry_open+0xc7/0x1aa > [<c1057c91>] nameidata_to_filp+0x1c/0x2e > [<c1057cd1>] do_filp_open+0x2e/0x35 > [<c1057dd7>] do_sys_open+0x38/0x68 > [<c1057e33>] sys_open+0x16/0x18 > [<c1002845>] sysenter_past_esp+0x56/0x8d OK, I'm having a look here; its all new to me so bear with me. blkdev_open() calls do_open(bdev, ...,BD_MUTEX_NORMAL) and takes mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_NORMAL) then something fails, and we're thrown to: out_first: where if (bdev != bdev->bd_contains) blkdev_put(bdev->bd_contains) which is __blkdev_put(bdev->bd_contains, BD_MUTEX_NORMAL) which does mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_NORMAL) <--- lockdep trigger When going to out_first, dbev->bd_contains is either bdev or whole, and since we take the branch it must be whole. So it seems to me the following patch would be the right one: [akpm@osdl.org: compile fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:29 UTC
7334bb4 [PATCH] 1394: fix for recently added firewire patch that breaks things on ppc Recently a patch was added for preliminary suspend/resume handling on !PPC_PMAC. However, this broke both suspend and firewire on powerpc because it saves the pci state after the device has already been disabled. This moves the save state to before the pmac specific code. Signed-off-by: Danny Tholen <obiwan@mailmij.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Collins <bcollins@ubuntu.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
a2e0b56 [PATCH] Fix docs for fs.suid_dumpable Sergey Vlasov noticed that there is not kernel.suid_dumpable, but fs.suid_dumpable. How KERN_SETUID_DUMPABLE ended up in fs_table[]? Hell knows... Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
cc36e7f [PATCH] tty: remove bogus call to cdev_del() When cdev_add() failed there is no reason to call cdev_del(). Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
641741e [PATCH] rtc-s3c.c: fix time setting checks Fix the year check on setting the time with the S3C24XX RTC driver. Also move the debug to before the set to see what is going on if it does fail. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
b6b5bce [PATCH] swsusp: Fix swap_type_of There is a bug in mm/swapfile.c#swap_type_of() that makes swsusp only be able to use the first active swap partition as the resume device. Fix it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Hugh Dickins <hugh@veritas.com> Acked-by: Pavel Machek <pavel@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
c06aad8 [PATCH] dm: Fix deadlock under high i/o load in raid1 setup. On an nForce4-equipped machine with two SATA disk in raid1 setup using dmraid, we experienced frequent deadlock of the system under high i/o load. 'cat /dev/zero > ~/zero' was the most reliable way to reproduce them: Randomly after a few GB, 'cp' would be left in 'D' state along with kjournald and kmirrord. The functions cp and kjournald were blocked in did vary, but kmirrord's wchan always pointed to 'mempool_alloc()'. We've seen this pattern on 2.6.15 and 2.6.17 kernels. http://lkml.org/lkml/2005/4/20/142 indicates that this problem has been around even before. So much for the facts, here's my interpretation: mempool_alloc() first tries to atomically allocate the requested memory, or falls back to hand out preallocated chunks from the mempool. If both fail, it puts the calling process (kmirrord in this case) on a private waitqueue until somebody refills the pool. Where the only 'somebody' is kmirrord itself, so we have a deadlock. I worked around this problem by falling back to a (blocking) kmalloc when before kmirrord would have ended up on the waitqueue. This defeats part of the benefits of using the mempool, but at least keeps the system running. And it could be done with a two-line change. Note that mempool_alloc() clears the GFP_NOIO flag internally, and only uses it to decide whether to wait or return an error if immediate allocation fails, so the attached patch doesn't change behaviour in the non-deadlocking case. Path is against current git (2.6.18-rc4), but should apply to earlier versions as well. I've tested on 2.6.15, where this patch makes the difference between random lockup and a stable system. Signed-off-by: Daniel Kobras <kobras@linux.de> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
9a65451 [PATCH] drivers/rtc: fix rtc-s3c.c In the cleanups of drivers/rtc/s3c-rtc.c, the base address for the registers got broken. This patch fixes that by ensuring the readb/writeb are all prefixed with the base returned from ioremap()ing the registers. Also fix check for valid year range, which was the wrong way around. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 27 August 2006, 18:01:28 UTC
66a377c [DCCP]: Fix CCID3 This fixes CCID3 to give much closer performance to RFC4342. CCID3 is meant to alter sending rate based on RTT and loss. The performance was verified against: http://wand.net.nz/~perry/max_download.php For example I tested with netem and had the following parameters: Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%. This gives a theoretical speed of 71.9 Kbits/s. I measured across three runs with this patch set and got 70.1 Kbits/s. Without this patchset the average was 232 Kbits/s which means Linux can't be used for CCID3 research properly. I also tested with netem turned off so box just acting as router with 1.2 msec RTT. The performance with this is the same with or without the patch at around 30 Mbit/s. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 06:40:50 UTC
3a13813 [BRIDGE] netfilter: memory corruption fix The bridge-netfilter code will overwrite memory if there is not headroom in the skb to save the header. This first showed up when using Xen with sky2 driver that doesn't allocate the extra space. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 03:28:30 UTC
8dbc160 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [DCCP]: Introduce dccp_rx_hist_find_entry [DCCP]: Introduces follows48 function [DCCP]: Update contact details and copyright [DCCP]: Fix typo [IPV6]: Segmentation offload not set correctly on TCP children [CONNECTOR]: Add userspace example code into Documentation/connector/ 27 August 2006, 03:18:49 UTC
80193ae [DCCP]: Introduce dccp_rx_hist_find_entry This adds a new function dccp_rx_hist_find_entry. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 02:07:36 UTC
837d107 [DCCP]: Introduces follows48 function This adds a new function to see if two sequence numbers follow each other. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 02:06:42 UTC
e6bccd3 [DCCP]: Update contact details and copyright Just updating copyright and contacts Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 02:01:30 UTC
f3166c0 [DCCP]: Fix typo This fixes a small typo in net/dccp/libs/packet_history.c Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 02:01:03 UTC
59eed27 [IPV6]: Segmentation offload not set correctly on TCP children TCP over IPV6 would incorrectly inherit the GSO settings. This would cause kernel to send Tcp Segmentation Offload packets for IPV6 data to devices that can't handle it. It caused the sky2 driver to lock http://bugzilla.kernel.org/show_bug.cgi?id=7050 and the e1000 would generate bogus packets. I can't blame the hardware for gagging if the upper layers feed it garbage. This was a new bug in 2.6.18 introduced with GSO support. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 01:42:01 UTC
897522e [CONNECTOR]: Add userspace example code into Documentation/connector/ I was asked several times to include userspace example code into Documentation, so if there is no policy against it, consider attached patch for 2.6.18. This program works with included Documentation/connector/cn_test.c connector module. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 01:42:00 UTC
81a42d2 [DISKLABEL] SUN: Fix signed int usage for sector count The current sun disklabel code uses a signed int for the sector count. When partitions larger than 1 TB are used, the cast to a sector_t causes the partition sizes to be invalid: # cat /proc/paritions | grep sdan 66 112 2146435072 sdan 66 115 9223372036853660736 sdan3 66 120 9223372036853660736 sdan8 This patch switches the sector count to an unsigned int to fix this. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 00:55:55 UTC
5fec811 [SPARC]: Small smp cleanup. It moves the smp_procesors_ready variable to sun4d_smp.c only. Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl) Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 00:52:56 UTC
a23b423 [SPARC]: enabling of the 2nd CPU in 2.6.18-rc4 smp_setup_cpu_possible_map() needs to run after paging_init() so that the in-kernel device tree is setup. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 27 August 2006, 00:52:51 UTC
94918ff [PATCH] unusual_devs update for UCR-61S2B The existing unusual_devs entry for the UCR-61S2B appears to have too wide a revision range. It matches at least one device that doesn't respond to the initialization sequence. Perhaps the sequence needs to be updated, or perhaps something else can be done. For now, this patch (as764) restricts the range to include only the revision mentioned in the original comment. This resolves (for now!) Bugzilla entry #6950. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:06:24 UTC
be72952 [PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cable This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:06:17 UTC
b93b58e [PATCH] USB: fix bug in cypress_cy7c63.c driver This was pointed out by Adrian Bunk <bunk@stusta.de>, as found by the Coverity Checker. Cc: Adrian Bunk <bunk@stusta.de> Cc: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:06:11 UTC
39ba487 [PATCH] PCI: kerneldoc correction in pci-driver Removes an unused kerneldoc entry from pci_match_device and put the others into correct order. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:59 UTC
cc702c2 [PATCH] CPCI hotplug: fix resource assignment Here is a patch against the CPCI hotplug core to fix up PCI resource assignment such that things will actually work when a hot inserted device is enabled. I mentioned this patch to you way back in April at ELC, but am only now out from under things enough to clean it up and submit it. I've basically cribbed the corresponding code from shpchp_pci.c, so there are no big surprises. If it's still possible, I wouldn't mind this going into 2.6.18, but it wouldn't be the end of the world if it went into 2.6.19. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:52 UTC
65ae4dd [PATCH] PCI: fix ICH6 quirks - add the ICH6(R) LPC to the ICH6 ACPI quirks. currently only the ICH6-M is handled. [ PCI_DEVICE_ID_INTEL_ICH6_1 is the ICH6-M LPC, ICH6_0 is the ICH6(R) ] - remove the wrong quirk calling asus_hides_smbus_lpc() for ICH6. the register modified in asus_hides_smbus_lpc() has a different meaning in ICH6. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:45 UTC
fd4dc27 [PATCH] PCI: i386 mmconfig: don't forget bus number when setting fallback_slots bits On i386 PCI mmconfig forgets the bus number when setting the fallback_slots bits which means fallback to conf1 only works for bus 0. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:37 UTC
954c0b7 [PATCH] PCI: use PCBIOS as last fallback there was a change in 2.6.17 which affected the order in which the PCI access methods are probed. this gives regressions on some machines with broken BIOS. the problem is that PCBIOS sometimes reports last bus wrong, leaving cardbus non-funcational. previously those system worked fine with direct access. The patch changes the PCI init code to have PCBIOS as last fallback, yet the PCBIOS code still has to run first to set pcibios_last_bus to the value reported by the BIOS. this is needed in case legacy PCI probing (arch/i386/pci/legacy.c) is used to detect peer busses. using direct access if available fixes the cardbus problems. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:31 UTC
faf9b61 [PATCH] hwmon: abituguru timeout fixes This patch contains 2 sets of fixes for the abituguru: 1) Much improved timeout handling, drasticly reducing the amount of timeout errors on some motherboards 2) Fix the exit paths in the bank1 sensor type detect code to always restore the original settings even on an error. Without this our special test settings could remain seriously confusing the system BIOS's setup menu. Both are very much related and are must haves, to avoid messing up the uguru CMOS settings. Detailed changes: - Much improved timeout / wait for status handling. Many thanks to Sunil Kumar, for all his testing, ideas and patches! The code now first busy waits, polling the uguru for the expected status as this usually succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn in timeout conditions, the amount of busy waiting has been halved from previous versions (120 tries instead of 250). This is not a problem, because this version goes to sleep after 120 attemps for 1 jiffy and then tries again, it does this sleep and try again 5 times before finally giving up. This (almost?) completly removes the timeout errors some people have seen regulary. Apparently some older uguru versions sometimes are distracted for a (relatively) long time. This solves this. - These timeout errors not only occur in the sending address part of reading the uguru but also in the wait for read state, so errors in this state are now handled as retryable just like send address state errors and are only logged and reported to userspace if 3 executive tries fail. - Fix a very nasty bug in the bank1 sensor type detection code, where it would not restore the original settings in any of the error paths! - Since not successfully restoring the original settings can seriously confuse the system BIOS (hang when entering the relevant setup menu), we now try restoring them 3 times before giving up. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:19 UTC
4801bc2 [PATCH] i2c: tps65010 build fixes The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 26 August 2006, 20:05:12 UTC
f834c75 Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 26 August 2006, 20:04:23 UTC
0db99e3 [SCSI] fix scsi_send_eh_cmnd regression The callers of scsi_send_eh_cmnd are setting the cmnd buffer, and then scsi_send_eh_cmnd is copying that updated buffer to the old_cmnd variable. Then after the command runs, we end up copying that old_cmnd var which has the new cmnd to the scsi command buffer. When this command gets recent, all types of fun things happen like getting TUR or START_STOP commands with data and scatterlists. This patch made against scsi-rc-fixes, has the callers of scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd can do the right thing. This should go into 2.6.18 since this fixes a regression added when we removed some of the scsi_cmnd fields and replaced them with local variables. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> 26 August 2006, 15:03:14 UTC
15a3758 [SCSI] qla2xxx: Update version number to 8.01.07-k1. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> 26 August 2006, 14:26:57 UTC
476e897 [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort. Software must explicitely re-enable extended firmware tracing after any ISP abort condition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> 26 August 2006, 14:26:41 UTC
9c06938 [SCSI] qla2xxx: Correct PLOGI retry logic. Original code attempts to retry PLOGIs to fcports that are FCP_TARGETs only. If the driver never performed a successful PLOGI/PRLI, the port-type would never be assigned, and the relogin logic would silently drop the request (and thus the port would not be recognized and registered). The fix is relatively straightforward, drop the FCP_TARGET-only check. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> 26 August 2006, 14:26:27 UTC
b2155d0 [SCSI] sg: fix incorrect page problem There's a problem where sg is executing a ->nopage operation on a compound page, it actually calls get_page() on the first page in the compound rather than the page which is being mapped. The fix is to select the correct page by indexing into the compound. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> 26 August 2006, 14:25:06 UTC
62250b3 Merge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6 25 August 2006, 05:29:46 UTC
a969fd5 VFS: Remove redundant open-coded mode bit checks in open_exec(). The check in open_exec() for inode->i_mode & 0111 has been made redundant by the fix to permission(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 1d3741c5d991686699f100b65b9956f7ee7ae0ae commit) 24 August 2006, 19:55:16 UTC
9167b0b VFS: Remove redundant open-coded mode bit check in prepare_binfmt(). The check in prepare_binfmt() for inode->i_mode & 0111 is redundant, since open_exec() will already have done that. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 822dec482ced07af32c378cd936d77345786572b commit) 24 August 2006, 19:55:06 UTC
a343bb7 VFS: Fix access("file", X_OK) in the presence of ACLs Currently, the access() call will return incorrect information on NFS if there exists an ACL that grants execute access to the user on a regular file. The reason the information is incorrect is that the VFS overrides this execute access in open_exec() by checking (inode->i_mode & 0111). This patch propagates the VFS execute bit check back into the generic permission() call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 64cbae98848c4c99851cb0a405f0b4982cd76c1e commit) 24 August 2006, 19:54:58 UTC
16b4289 NFSv4: Add v4 exception handling for the ACL functions. This is needed in order to handle any NFS4ERR_DELAY errors that might be returned by the server. It also ensures that we map the NFSv4 errors before they are returned to userland. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 71c12b3f0abc7501f6ed231a6d17bc9c05a238dc commit) 24 August 2006, 19:54:13 UTC
e889649 NFS: Check lengths more thoroughly in NFS4 readdir XDR decode Check the bounds of length specifiers more thoroughly in the XDR decoding of NFS4 readdir reply data. Currently, if the server returns a bitmap or attr length that causes the current decode point pointer to wrap, this could go undetected (consider a small "negative" length on a 32-bit machine). Also add a check into the main XDR decode handler to make sure that the amount of data is a multiple of four bytes (as specified by RFC-1014). This makes sure that we can do u32* pointer subtraction in the NFS client without risking an undefined result (the result is undefined if the pointers are not correctly aligned with respect to one another). Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 5861fddd64a7eaf7e8b1a9997455a24e7f688092 commit) 24 August 2006, 19:53:34 UTC
3cedf13 NFSv4: increase client-provided nfs4 clientid size Neil Brown observed that the current limit of 32 bytes isn't enough to hold two ip addresses and the rest of the stuff we're putting in it, so it's often truncated to the point where it's unlikely to be unique. This can cause spurious CLID_INUSE's from the server. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from fc8c17ec251e984ab3df9182ed097aa5b577c915 commit) 24 August 2006, 19:51:59 UTC
8e03709 SUNRPC: avoid choosing an IPMI port for RPC traffic Some hardware uses port 664 for its hardware-based IPMI listener. Teach the RPC client to avoid using that port by raising the default minimum port number to 665. Test plan: Find a mainboard known to use port 664 for IPMI; enable IPMI; mount NFS servers in a tight loop. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 58e8cb3a035d22fc386e1c53a5d98c3f219530fb commit) 24 August 2006, 19:51:32 UTC
79558f3 NFS: Fix issue with EIO on NFS read The problem is that we may be caching writes that would extend the file and create a hole in the region that we are reading. In this case, we need to detect the eof from the server, ensure that we zero out the pages that are part of the hole and mark them as up to date. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 856b603b01b99146918c093969b6cb1b1b0f1c01 commit) 24 August 2006, 19:51:08 UTC
01df9c5 LOCKD: Fix a deadlock in nlm_traverse_files() nlm_traverse_files() is not allowed to hold the nlm_file_mutex while calling nlm_inspect file, since it may end up calling nlm_release_file() when releaseing the blocks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from e558d3cde986e04f68afe8c790ad68ef4b94587a commit) 24 August 2006, 19:51:00 UTC
8f8e7a5 SUNRPC: Fix dentry refcounting issues with users of rpc_pipefs rpc_unlink() and rpc_rmdir() will dput the dentry reference for you. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit) 24 August 2006, 19:50:51 UTC
68adb0a SUNRPC: rpc_unlink() must check for unhashed dentries A prior call to rpc_depopulate() by rpc_rmdir() on the parent directory may have already called simple_unlink() on this entry. Add the same check to rpc_rmdir(). Also remove a redundant call to rpc_close_pipes() in rpc_rmdir. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 0bbfb9d20f6437c4031aa3bf9b4d311a053e58e3 commit) 24 August 2006, 19:50:42 UTC
dff02cc NFS: clean up rpc_rmdir Make it take a dentry argument instead of a path Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit) 24 August 2006, 19:50:32 UTC
5d67476 SUNRPC: make rpc_unlink() take a dentry argument instead of a path Signe-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 88bf6d811b01a4be7fd507d18bf5f1c527989089 commit) 24 August 2006, 19:50:07 UTC
a634904 VFS: add lookup hint for network file systems I'm trying to speeding up mkdir(2) for network file systems. A typical mkdir(2) calls two inode_operations: lookup and mkdir. The lookup operation would fail with ENOENT in common case. I think it is unnecessary because the subsequent mkdir operation can check it. In case of creat(2), lookup operation is called with the LOOKUP_CREATE flag, so individual filesystem can omit real lookup. e.g. nfs_lookup(). Here is a sample patch which uses LOOKUP_CREATE and O_EXCL on mkdir, symlink and mknod. This uses the gadget for creat(2). And here is the result of a benchmark on NFSv3. mkdir(2) 10,000 times: original 50.5 sec patched 29.0 sec Signed-off-by: ASANO Masahiro <masano@tnes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from fab7bf44449b29f9d5572a5dd8adcf7c91d5bf0f commit) 24 August 2006, 19:49:14 UTC
ddeff52 NFS: Fix a potential deadlock in nfs_release_page nfs_wb_page() waits on request completion and, as a result, is not safe to be called from nfs_release_page() invoked by VM scanner as part of GFP_NOFS allocation. Fix possible deadlock by analyzing gfp mask and refusing to release page if __GFP_FS is not set. Signed-off-by: Nikita Danilov <danilov@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 374d969debfb290bafcb41d28918dc6f7e43ce31 commit) 24 August 2006, 19:48:46 UTC
428a7e3 Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6 24 August 2006, 17:54:22 UTC
8e79a44 [S390] dasd PAV enabling. The subsystem check in the PAV code is incorrect, it enables PAV per device instead of per subsystem. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 24 August 2006, 11:22:36 UTC
7bf1348 Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 24 August 2006, 08:28:14 UTC
ac2164d [PATCH] sata_via: use old SCR access pattern on vt6420 vt6420 has super-fragile SCR registers which can hang the whole machine if accessed with the wrong timings. This patch makes sata_via use SCR registers only during probing and with the same timings as before (pre new EH), which is proven to work. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 06:51:24 UTC
9dd9c16 [PATCH] ata_piix: implement force_pcs module parameter This patch implements force_pcs module parameter for ata_piix. If 1, PCS is ignored, 2 honored. As there seem to be quite a few ICHs w/ impaired PCS, this option will be useful for cases where the default setting doesn't work. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 06:51:24 UTC
f3745a3 [PATCH] ata_piix: ignore PCS on ICH5 There have been a number of reports regarding some ICH5s failing to detect devices since the PCS handling update. Analysis shows that these problems are caused by bogus PCS values from those controllers. Before the PCS update, the driver didn't honor PCS regs exactly and probed them in many cases PCS reports no device. Now that PCS is honored exactly, these hardware problems are visible. This patch makes ICH5 ignore PCS. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 06:51:24 UTC
20253de Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 24 August 2006, 04:58:48 UTC
357eb4c Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 24 August 2006, 04:41:25 UTC
c5ab964 [PATCH] spectrum_cs: Fix firmware uploading errors spectrum_cs: Fix the logic so we error when the device is *not* present! This fixes firmware upload failures which prevent the driver from working (the bug is also present in 2.6.17). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 04:40:51 UTC
8d91626 [PATCH] pcnet32: break in 2.6.18-rc1 identified A change I made for 2.6.17 and another for 2.6.18 do not work on older pcnet32 chips which I do not have access to. If the chip is a 79C970 or 79C965, do not try and suspend or check the link status. I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976, and 79C978. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 04:40:03 UTC
9a469ab [PATCH] xirc2ps_cs: Cannot reset card in atomic context I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems. If the netdev watchdog detects a transmit timeout, do_reset is called which msleeps - this is illegal in atomic context. This patch schedules the timeout handling as a workqueue item. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 04:38:32 UTC
cb95818 [PATCH] Signedness issue in drivers/net/3c515.c while playing with gcc 4.1 -Wextra warnings, I came across this one: drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true Since i is unsigned the >= 0 check in the for loop is always true, so we might spin there forever unless the if condition triggers. Since i is only used in this loop, this patch changes it to an integer. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> 24 August 2006, 04:37:04 UTC
b727715 Merge branch 'for-linus' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/dtor/input 24 August 2006, 04:11:56 UTC
ccc712f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 24 August 2006, 04:08:12 UTC
9c63764 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband 24 August 2006, 01:08:44 UTC
back to top