https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
7dcca30 Linux 2.6.22 Woo-hoo. I'm sure somebody will report a "this doesn't compile, and I have a new root exploit" five minutes after release, but it still feels good ;) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 July 2007, 23:32:17 UTC
fe5a2de Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: qd65xx: fix PIO mode selection sis5513: adding PCI-ID 08 July 2007, 19:14:27 UTC
1e5de28 Fix permission checking for the new utimensat() system call Commit 1c710c896eb461895d3c399e15bb5f20b39c9073 added the utimensat() system call, but didn't handle the case of checking for the writability of the target right, when the target was a file descriptor, not a filename. We cannot use vfs_permission(MAY_WRITE) for that case, and need to simply check whether the file descriptor is writable. The oops from using the wrong function was noticed and narrowed down by Markus Trippelsdorf. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 July 2007, 19:02:55 UTC
4e99325 mm: double mark_page_accessed() in read_cache_page_async() Fix a post-2.6.21 regression. read_cache_page_async() has two invocations of mark_page_accessed() which will launch pages right onto the active list. Remove the first one, keeping the latter one. This avoids marking unwanted pages active (in the retry loop). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 July 2007, 17:13:21 UTC
4660897 qd65xx: fix PIO mode selection PIO4 is a maximum PIO mode supported by a driver. Using "255" as a max_mode argument to ide_get_best_pio_mode() could result in wrong timings being used by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk> 08 July 2007, 13:21:58 UTC
4c6c914 sis5513: adding PCI-ID The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 08 July 2007, 13:21:58 UTC
95511ad DLM must depend on SYSFS The dependency of DLM on SYSFS got lost in commit 6ed7257b46709e87d79ac2b6b819b7e0c9184998 resulting in the following compile error with CONFIG_DLM=y, CONFIG_SYSFS=n: <-- snip --> ... LD .tmp_vmlinux1 fs/built-in.o: In function `dlm_lockspace_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/dlm/lockspace.c:231: undefined reference to `kernel_subsys' fs/built-in.o: In function `configfs_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/configfs/mount.c:143: undefined reference to `kernel_subsys' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 July 2007, 21:17:43 UTC
38377be Clean up E7520/7320/7525 quirk printk. The printk level in this printk is bogus, as the previous printk didn't have a terminating \n resulting in .. Intel E7520/7320/7525 detected.<6>Disabling irq balancing and affinity It also never printed a \n at all in the case where we didn't do the quirk. Change it to only make noise if it actually does something useful. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 July 2007, 20:53:13 UTC
40e48ee include/linux/kallsyms.h must #include <linux/errno.h> This patch fixes the following 2.6.22 regression with CONFIG_KALLSYMS=n: <-- snip --> ... CC arch/m32r/kernel/traps.o In file included from /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/arch/m32r/kernel/traps.c:14: /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_name': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: 'ERANGE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_attrs': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:71: error: 'ERANGE' undeclared (first use in this function) make[2]: *** [arch/m32r/kernel/traps.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 July 2007, 20:49:51 UTC
1c39858 Fix use-after-free oops in Bluetooth HID. When cleaning up HIDP sessions, we currently close the ACL connection before deregistering the input device. Closing the ACL connection schedules a workqueue to remove the associated objects from sysfs, but the input device still refers to them -- and if the workqueue happens to run before the input device removal, the kernel will oops when trying to look up PHYSDEVPATH for the removed input device. Fix this by deregistering the input device before closing the connections. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 July 2007, 19:22:37 UTC
d23cf67 slub: remove useless EXPORT_SYMBOL kmem_cache_open is static. EXPORT_SYMBOL was leftover from some earlier time period where kmem_cache_open was usable outside of slub. (Fixes powerpc build error) Signed-off-by: Chrsitoph Lameter <clameter@sgi.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 18:45:11 UTC
c3000e0 MAINTAINERS new kernel janitors ml davem kindly moved the list from osdl to vger. Signed-of-by: maximilian attems <max@stro.at> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 18:45:11 UTC
95069f8 GEODE: reboot fixup for geode machines with CS5536 boards Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines, this has the reboot fixup do just that if such a board is detected. Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 18:45:11 UTC
1feb17e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETPOLL]: Fixups for 'fix soft lockup when removing module' [NET]: net/core/netevent.c should #include <net/netevent.h> [NETFILTER]: nf_conntrack_h323: add checking of out-of-range on choices' index values [NET] skbuff: remove export of static symbol SCTP: Add scope_id validation for link-local binds SCTP: Check to make sure file is valid before setting timeout SCTP: Fix thinko in sctp_copy_laddrs() 06 July 2007, 17:30:12 UTC
dadde13 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix scheduling latency issue on 24K, 34K and 74K cores [MIPS] Add macros to encode processor revisions. [MIPS] RM7000: Enable ICACHE_REFILLS_WORKAROUND_WAR. [MIPS] SMTC: Fix cut'n'paste bug in Kconfig.debug [MIPS] Change libgcc-style functions from lib-y to obj-y [MIPS] Fix timer/performance interrupt detection [MIPS] AP/SP: Avoid triggering the 34K E125 performance issue [MIPS] 64-bit TO_PHYS_MASK macro for RM9000 processors 06 July 2007, 17:29:33 UTC
23c1fb5 mm: fixup /proc/vmstat output Line up the vmstat_text with zone_stat_item enum zone_stat_item { /* First 128 byte cacheline (assuming 64 bit words) */ NR_FREE_PAGES, NR_INACTIVE, NR_ACTIVE, We current have nr_active and nr_inactive reversed. [ "OK with patch, though using initializers canbe handy to prevent such things in future: static const char * const vmstat_text[] = { [NR_FREE_PAGES] = "nr_free_pages", ..." - Alexey ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:26:50 UTC
0da2f0f potential compiler error, irqfunc caller sites update In 7d12e780e003f93433d49ce78cfedf4b4c52adc5 David Howells performed this evolution: "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers" He correctly updated many of the function definitions that were using this extra regs pointer parameter but forgot to update some caller sites of those functions. The reason the modifications was not properly done on all drivers is that some drivers were rarely compiled because they are for AMIGA, or that some code sites were inside #ifdefs where the option is not set or inside #if 0. Here is the semantic patch that found the occurences and fixed the problem. @ rule1 @ identifier fn; identifier irq, dev_id; typedef irqreturn_t; @@ static irqreturn_t fn(int irq, void *dev_id) { ... } @@ identifier rule1.fn; expression E1, E2, E3; @@ fn(E1, E2 - ,E3 ) Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
071922c i386: es7000 build breakage fix o Commit 1833d6bc72893265f22addd79cf52e6987496e0f broke the build if compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n arch/i386/kernel/built-in.o(.init.text+0x4fa9): In function `acpi_parse_madt': : undefined reference to `acpi_madt_oem_check' arch/i386/kernel/built-in.o(.init.text+0x7406): In function `smp_read_mpc': : undefined reference to `mps_oem_check' arch/i386/kernel/built-in.o(.init.text+0x8990): In function `connect_bsp_APIC': : undefined reference to `enable_apic_mode' make: *** [.tmp_vmlinux1] Error 1 o Fix the build issue. Provided the definitions of missing functions. o Don't have ES7000 machine. Only compile tested. Cc: Len Brown <lenb@kernel.org> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
41a5311 PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issues When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims the device is working, but it really isn't configured correctly. The BIOS *will* configure it, but only if we call _SRS after (1) reversing the order of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high to active-low. This patch addresses the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" I tested this on a Portege 4000. The smsc-ircc2 driver correctly detects the device, and "irattach irda0 -s && irdadump" shows transmitted and received packets. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
d57d973 fix logic error in ipc compat semctl() When calling a semctl(IPC_STAT) without IPC_64 the check if the memory is unevaluated. This patch fixes this. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
0db19c4 x86_64: fix headers_install A bug in headers_install for ARCH=x86_64 yields an asm/ directory full of files all of which are using the same #ifdef guard, "__ASM_STUB_" with no postfix. So the second and later asm files #included in the same C file (often through standard headers like ioctl.h) yields no symbols. Strangeness with the Ubuntu 'tell me if I support something that's not explcitly mentioned in POSIX, and I'll strip it out' shell, I believe. We don't need the 'export' but we do need a semicolon at the end of the FNAME line: Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
d25c1ba MTRR: Fix race causing set_mtrr to go into infinite loop Processors synchronization in set_mtrr requires the .gate field to be set after .count field is properly initialized. Without an explicit barrier, the compiler was reordering those memory stores. That was sometimes causing a processor (in ipi_handler) to see the .gate change and decrement .count before the latter is set by set_mtrr() (which then hangs in a infinite loop with irqs disabled). Signed-off-by: Loic Prylli <loic@myri.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
1e2e99f i386: fix regression, endless loop in ptrace singlestep over an int80 The commit 635cf99a80f4ebee59d70eb64bb85ce829e4591f introduced a regression. Executing a ptrace single step after certain int80 accesses will infinitely loop and never advance the PC. The TIF_SINGLESTEP check should be done on the return from the syscall and not before it. I loops on each single step on the pop right after the int80 which writes out to the console. At that point you can issue as many single steps as you want and it will not advance any further. The test case is below: /* Test whether singlestep through an int80 syscall works. */ #define _GNU_SOURCE #include <stdio.h> #include <unistd.h> #include <fcntl.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <sys/mman.h> #include <asm/user.h> #include <string.h> static int child, status; static struct user_regs_struct regs; static void do_child() { char str[80] = "child: int80 test\n"; ptrace(PTRACE_TRACEME, 0, 0, 0); kill(getpid(), SIGUSR1); write(fileno(stdout),str,strlen(str)); asm ("int $0x80" : : "a" (20)); /* getpid */ } static void do_parent() { unsigned long eip, expected = 0; again: waitpid(child, &status, 0); if (WIFEXITED(status) || WIFSIGNALED(status)) return; if (WIFSTOPPED(status)) { ptrace(PTRACE_GETREGS, child, 0, &regs); eip = regs.eip; if (expected) fprintf(stderr, "child stop @ %08lx, expected %08lx %s\n", eip, expected, eip == expected ? "" : " <== ERROR"); if (*(unsigned short *)eip == 0x80cd) { fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip); expected = eip + 2; } else expected = 0; ptrace(PTRACE_SINGLESTEP, child, NULL, NULL); } goto again; } int main(int argc, char * const argv[]) { child = fork(); if (child) do_parent(); else do_child(); return 0; } Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: <stable@kernel.org> Cc: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
ef7320e Fix elf_core_dump() when writing arch specific notes (spu coredumps) elf_core_dump() supports dumping arch specific ELF notes, via the #define ELF_CORE_WRITE_EXTRA_NOTES. Currently the only user of this is the powerpc spu coredump code. There is a bug in the handling of foffset WRT the arch notes, which causes us to erroneously increment foffset by the size of the arch notes, leaving a block of zeroes in the file, and causing all subsequent data in the file to be at <supposed position> + <arch note size>. eg: LOAD 0x050000 0x00100000 0x00000000 0x20000 0x20000 R E 0x10000 Tells us we should have a chunk of data at 0x50000. The truth is the data is at 0x90dbc = 0x50000 + 0x40dbc (the size of the arch notes). This bug prevents gdb from reading the core file correctly. The simplest fix is to simply remember the size of the arch notes, and add it to foffset after we've written the arch notes. The only drawback is that if the arch code doesn't write as many bytes as it said it would, we end up with a broken core dump again. For now I think that's a reasonable requirement. Tested on a Cell blade, gdb no longer complains about the core file being bogus. While I'm here I should point out that the spu coredump code does not work if we're dumping to a pipe - we'll have to wait for 23 to fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 July 2007, 17:23:43 UTC
4b3e975 [MIPS] Fix scheduling latency issue on 24K, 34K and 74K cores The idle loop goes to sleep using the WAIT instruction if !need_resched(). This has is suffering from from a race condition that if if just after need_resched has returned 0 an interrupt might set TIF_NEED_RESCHED but we've just completed the test so go to sleep anyway. This would be trivial to fix by just disabling interrupts during that sequence as in: local_irq_disable(); if (!need_resched()) __asm__("wait"); local_irq_enable(); but the processor architecture leaves it undefined if a processor calling WAIT with interrupts disabled will ever restart its pipeline and indeed some processors have made use of the freedom provided by the architecture definition. This has been resolved and the Config7.WII bit indicates that the use of WAIT is safe on 24K, 24KE and 34K cores. It also is safe on 74K starting revision 2.1.0 so enable the use of WAIT with interrupts disabled for 74K based on a c0_prid of at least that. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:11 UTC
fde9782 [MIPS] Add macros to encode processor revisions. Older processors used to encode processor version and revision in two 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores have switched to use the 8-bits as 3:3:2 bitfield with the last field as the patch number. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:11 UTC
075c733 [MIPS] RM7000: Enable ICACHE_REFILLS_WORKAROUND_WAR. The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra opposes it being called that) where invalid instructions in the same I-cache line worth of instructions being fetched may case spurious exceptions. The workaround for this was only enabled for E9000 cores; enable it also for all RM7000-based platforms. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:11 UTC
9349075 [MIPS] SMTC: Fix cut'n'paste bug in Kconfig.debug This effectivly turned the SMTC_IDLE_HOOK_DEBUG debug option into a no-op. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:11 UTC
f7c2778 [MIPS] Change libgcc-style functions from lib-y to obj-y Reported by Eugene Surovegin <ebs@ebshome.net>. If only modules were users of these functions they did not get linked into the kernel proper, so later module loads would fail as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:11 UTC
c3e838a [MIPS] Fix timer/performance interrupt detection Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:11 UTC
6fb88ce [MIPS] AP/SP: Avoid triggering the 34K E125 performance issue C0_status doesn't need to be initialized at this point anyway; the register will be initialized later. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:10 UTC
5a19709 [MIPS] 64-bit TO_PHYS_MASK macro for RM9000 processors Signed-off-by: Andrew Sharp <tigerand@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 06 July 2007, 15:17:10 UTC
25442ca [NETPOLL]: Fixups for 'fix soft lockup when removing module' >From my recent patch: > > #1 > > Until kernel ver. 2.6.21 (including) cancel_rearming_delayed_work() > > required a work function should always (unconditionally) rearm with > > delay > 0 - otherwise it would endlessly loop. This patch replaces > > this function with cancel_delayed_work(). Later kernel versions don't > > require this, so here it's only for uniformity. But Oleg Nesterov <oleg@tv-sign.ru> found: > But 2.6.22 doesn't need this change, why it was merged? > > In fact, I suspect this change adds a race, ... His description was right (thanks), so this patch reverts #1. Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:42:44 UTC
94b8341 [NET]: net/core/netevent.c should #include <net/netevent.h> Every file should include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:40:27 UTC
25845b5 [NETFILTER]: nf_conntrack_h323: add checking of out-of-range on choices' index values Choices' index values may be out of range while still encoded in the fixed length bit-field. This bug may cause access to undefined types (NULL pointers) and thus crashes (Reported by Zhongling Wen). This patch also adds checking of decode flag when decoding SEQUENCEs. Signed-off-by: Jing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:40:23 UTC
2cd052e [NET] skbuff: remove export of static symbol skb_clone_fraglist is static so it shouldn't be exported. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:40:19 UTC
1669d85 SCTP: Add scope_id validation for link-local binds SCTP currently permits users to bind to link-local addresses, but doesn't verify that the scope id specified at bind matches the interface that the address is configured on. It was report that this can hang a system. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:40:15 UTC
f50f95c SCTP: Check to make sure file is valid before setting timeout In-kernel sockets created with sock_create_kern don't usually have a file and file descriptor allocated to them. As a result, when SCTP tries to check the non-blocking flag, we Oops when dereferencing a NULL file pointer. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:40:11 UTC
3663c30 SCTP: Fix thinko in sctp_copy_laddrs() Correctly dereference bytes_copied in sctp_copy_laddrs(). I totally must have spaced when doing this. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 July 2007, 00:40:08 UTC
7e8767d Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] always allow dump_stack() to produce a backtrace [ARM] Fix non-page aligned boot time mappings [ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resume [ARM] 4454/1: Use word accesses in Versatile PCI config reads 05 July 2007, 23:10:16 UTC
cab8e5c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document some of keycodes Input: add a new EV_SW SW_RADIO event, for radio switches on laptops Input: serio - take drv_mutex in serio_cleanup() Input: atkbd - use printk_ratelimit for spurious ACK messages Input: atkbd - throttle LED switching Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklist 05 July 2007, 22:55:37 UTC
0dac723 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Update defconfigs [POWERPC] Uninline and export virq_to_hw() for the pasemi_mac driver [POWERPC] Fix PMI breakage in cbe_cbufreq driver [POWERPC] Disable old EMAC driver in arch/powerpc 05 July 2007, 22:55:00 UTC
87a927c Fix slab redzone alignment Commit b46b8f19c9cd435ecac4d9d12b39d78c137ecd66 fixed a couple of bugs by switching the redzone to 64 bits. Unfortunately, it neglected to ensure that the _second_ redzone, after the slab object, is aligned correctly. This caused illegal instruction faults on sparc32, which for some reason not entirely clear to me are not trapped and fixed up. Two things need to be done to fix this: - increase the object size, rounding up to alignof(long long) so that the second redzone can be aligned correctly. - If SLAB_STORE_USER is set but alignof(long long)==8, allow a full 64 bits of space for the user word at the end of the buffer, even though we may not _use_ the whole 64 bits. This patch should be a no-op on any 64-bit architecture or any 32-bit architecture where alignof(long long) == 4. Of the others, it's tested on ppc32 by myself and a very similar patch was tested on sparc32 by Mark Fortescue, who reported the new problem. Also, fix the conditions for FORCED_DEBUG, which hadn't been adjusted to the new sizes. Again noticed by Mark. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 July 2007, 22:54:13 UTC
082f47a [ARM] always allow dump_stack() to produce a backtrace Don't make this dependent on CONFIG_DEBUG_KERNEL - if we hit a WARN_ON we need the stack trace to work out how we got to that point. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 05 July 2007, 18:59:51 UTC
2bcb1b7 Remove the blink driver Yeah, we could have just disabled it, but there's work on a new one that isn't as fundamentally broken, so there really doesn't seem to be any point in keeping it around. The recent timer cleanup broke the only valid use, and when I say "valid", I obviously mean "totally broken". So it's not like it works, or really even can work in the current format that uses the unsafe "panic" LED blinking routines.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 July 2007, 22:24:39 UTC
7b9c7b4 [ARM] Fix non-page aligned boot time mappings AT91SAM9260 stopped booting with the recent changes to MM initialisation - it was asking for a non-aligned virtual address which caused loops to be non-terminal. Fix this by rounding virtual addresses down, but remember to include the offset in the length, and round the length up to the following page. This means that asking for a mapping of 4K starting at 2K into a page maps two pages as one would expect. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 04 July 2007, 20:16:33 UTC
190045d Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] VSMP: Fix initialization ordering bug. [MIPS] Add whitelists for checksyscalls.sh [MIPS] die(): Properly declare as non-returning [MIPS] Fix include wrapper symbol definitions in IP32 code. 04 July 2007, 16:26:44 UTC
8c976e3 [MIPS] VSMP: Fix initialization ordering bug. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 July 2007, 14:53:16 UTC
83d0f23 [MIPS] Add whitelists for checksyscalls.sh Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 July 2007, 14:53:16 UTC
eaf2b8d [MIPS] die(): Properly declare as non-returning This marks the declaration of die() correctly, removing "control reaches end of non-void function" warnings from non-void functions that die() at the end. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 July 2007, 14:53:15 UTC
ab012eb [MIPS] Fix include wrapper symbol definitions in IP32 code. Some IP35 defines snuck into some IP32-specific code during the DMA re-write. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 July 2007, 14:53:15 UTC
e2baf4e [JFFS2] Fix readinode failure when read_dnode() detects CRC failure. We should have stopped returning 1 from read_dnode() to indicate failure. We can just mark the damn thing obsolete immediately. But I missed a case where we don't. Signed-off-by: David Woodhouse <dwmw2@infradead.org> 04 July 2007, 14:24:29 UTC
ba609a9 Remove some unused variables When Andi reverted the HPET resource reservation (in commit 0f8dc2f06560e2ca126d1670a24126ba08357d38), he didn't remove the now unused variables, which just causes gcc to be noisy. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 July 2007, 01:27:53 UTC
fcb82f8 dio: remove bogus refcounting BUG_ON Badari Pulavarty reported a case of this BUG_ON is triggering during testing. It's completely bogus and should be removed. It's trying to notice if we left references to the dio hanging around in the sync case. They should have been dropped as IO completed while this path was in dio_await_completion(). This condition will also be checked, via some twisty logic, by the BUG_ON(ret != -EIOCBQUEUED) a few lines lower. So to start this BUG_ON() is redundant. More fatally, it's dereferencing dio-> after having dropped its reference. It's only safe to dereference the dio after releasing the lock if the final reference was just dropped. Another CPU might free the dio in bio completion and reuse the memory after this path drops the dio lock but before the BUG_ON() is evaluated. This patch passed aio+dio regression unit tests and aio-stress on ext3. Signed-off-by: Zach Brown <zach.brown@oracle.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 July 2007, 01:23:23 UTC
5dcccd8 Revert perfctr reservation to 2.6.21 state With this change it works again when the nmi watchdog is disabled. Signed-off-by: Andi Kleen <ak@suse.de> Cc: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Stephane Eranian <eranian@hpl.hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 July 2007, 01:11:35 UTC
0f8dc2f Revert HPET resource reservation Matthias Lenk reports that the PCI subsystem would move the HPET on SB400/SB600-based systems, where the HPET is in BAR1 of the SMbus controller. The reason? The ACPI layer registered the PCI MMIO range as being busy too early, before PCI enumeration had happened, causing the PCI layer to decide that it should relocate the resources somewhere else. Firmware resources should be marked busy _after_ the PCI enumeration and probing has happened, not before. Remove the too-early reservation, we'll fix it up to do it properly later. In the meantime, this solves the regression. Tested-by: Matthias Lenk <matthias.lenk@amd.com> Cc: Aaron Durbin <adurbin@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 July 2007, 01:09:46 UTC
9d7542f Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: ide_scan_pcibus(): check __pci_register_driver return value ide: pdc202xx_new PLL input clock fix it821x: fix incorrect SWDMA mask amd74xx: resume fix hpt366: use correct enablebits for HPT36x hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66 ide: Fix a theoretical Ooops case ide: never called printk statement in ide-taskfile.c::wait_drive_not_busy 03 July 2007, 20:58:49 UTC
f744a05 Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5822): Fix the return value in ttpci_budget_init() V4L/DVB (5818): CinergyT2: fix flush_workqueue() vs work->func() deadlock V4L/DVB (5816): Cx88-blackbird: fix vidioc_g_tuner never ending list of tuners V4L/DVB (5808): Bttv: fix v4l1 breaking the driver 03 July 2007, 20:58:03 UTC
dbc55fa SLUB: Make lockdep happy by not calling add_partial with interrupts enabled during bootstrap If we move the local_irq_enable() to the end of the function then add_partial() in early_kmem_cache_node_alloc() will be called with interrupts disabled like during regular operations. This makes lockdep happy. Signed-off-by: Christoph Lameter <clameter@sgi.com> Tested-by: Andre Noll <maan@systemlinux.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 July 2007, 20:56:13 UTC
746976a NTP: remove clock_was_set() call to prevent deadlock The clock_was_set() call in seconds_overflow() which happens only when leap seconds are inserted / deleted is wrong in two aspects: 1. it results in a call to on_each_cpu() with interrupts disabled 2. it is potential deadlock source vs. call_lock in smp_call_function() The only possible side effect of the removal might be, that an absolute CLOCK_REALTIME timer fires 1 second too late, in the rare case of leap second deletion and an absolute CLOCK_REALTIME timer which expires in the affected time frame. It will never fire too early. This was probably observed by the reporter of a June 30th -> July 1st hang: http://lkml.org/lkml/2007/7/3/103 A similar problem was observed by Dave Jones, who provided a screen shot with a lockdep back trace, which allowed to analyse the problem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 July 2007, 20:54:27 UTC
d61bcce ide: ide_scan_pcibus(): check __pci_register_driver return value drivers/ide/setup-pci.c: In function 'ide_scan_pcibus': drivers/ide/setup-pci.c:879: warning: ignoring return value of '__pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:36 UTC
8006bf5 ide: pdc202xx_new PLL input clock fix Recently the PLL input clock of Promise 2027x is sometimes detected higher than expected (e.g. 20.027 MHz compared to 16.714 MHz). It seems sometimes the mdelay() function is not as precise as it used to be. Per Alan's advice, HT or power management might affect the precision of mdelay(). This patch calls gettimeofday() to measure the time elapsed and calculate the PLL input clock accordingly. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bahadir Balban <bahadir.balban@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:36 UTC
52374f8 it821x: fix incorrect SWDMA mask SWDMA modes are unsupported by it821x. Attempts to tune SWDMA modes always fail (due to sanity check in ->speedproc) and result in PIO being tuned. * Fix incorrect SWDMA mask so core code won't try these modes and will just tune PIO if no other DMA modes are available. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> 03 July 2007, 20:28:35 UTC
603a0e2 amd74xx: resume fix * Driver can't skip programming transfer mode on the device in amd_set_drive() (similar fix has been applied to via82cxxx driver ages ago). * While at it remove redundant warning (ide_config_drive_speed() already produces more valuable one). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:35 UTC
96dcc08 hpt366: use correct enablebits for HPT36x The HPT36x chips finally turned out to have the channel enable bits -- however, badly implemented. Make use of them despite it's probably only going to burden the driver's code -- assuming both channels are always enabled by the HighPoint BIOS anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Cc: michal.kepien@poczta.onet.pl Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:35 UTC
783353b hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66 Add the MAXTOR STM3320620A drive into the UltraDMA/66 mode blacklist for the HPT36x chips. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:35 UTC
7859557 ide: Fix a theoretical Ooops case Found by a static analyser. It is in theory possible we dereference dev->id when it has become invalid. Re-order to avoid this. Not needed for new-ide as we no longer support the crazy exabyte nest stuff Signed-off-by: Alan Cox <alan@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:35 UTC
b42fa13 ide: never called printk statement in ide-taskfile.c::wait_drive_not_busy Look at wait_drive_not_busy in drivers/ide/ide-taskfile.c: static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 100; u8 stat; /* * Last sector was transfered, wait until drive is ready. * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) udelay(10); if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } `printk' is never called because `retries' never holds zero at the outside of `while' loop: when `retries' holds zero at the while's loop condition, `retries' will hold -1 at the if condition. Signed-off-by: Masatake YAMATO <jet@gyve.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: joe@perches.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 03 July 2007, 20:28:34 UTC
1fb4a17 V4L/DVB (5822): Fix the return value in ttpci_budget_init() if the call to budget_register() fails in ttpci_budget_int(), ttpci_budget_init() returns success. The attached patch will fix this problem. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 03 July 2007, 18:11:21 UTC
1e4597e V4L/DVB (5818): CinergyT2: fix flush_workqueue() vs work->func() deadlock Spotted and tested by Thomas Sattler <tsattler@gmx.de>. cinergyT2.c does cancel_delayed_work() + flush_scheduled_work() while holding cinergyt2->sem. This leads to deadlock because work->func() needs the same mutex to complete. Another bug is that this code in fact can't reliably stop the re-arming delayed_work. Convert this code to use cancel_rearming_delayed_work() and move it out of ->sem. Another mutex, ->wq_sem, was added to protect against the concurrent open/resume. This patch is a horrible hack to fix the lockup which happens in practice. As Dmitry Torokhov pointed out this driver has other problems and needs further changes. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 03 July 2007, 18:11:19 UTC
f057131 V4L/DVB (5816): Cx88-blackbird: fix vidioc_g_tuner never ending list of tuners v4l-info and other programs would loop indefinitely while querying the tuners for cx88-blackbird cards. The cause was that vidioc_g_tuner didn't return an error value for qctrl->id != 0, making the application think there is a never ending list of tuners... This patch adds the same index check as done in vidioc_g_tuner() in cx88-video. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 03 July 2007, 18:11:16 UTC
333408f V4L/DVB (5808): Bttv: fix v4l1 breaking the driver If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as the first user after the driver is loaded, the driver wedges itself and will never capture properly. Even if one uses a V4L2 application later, it still won't work. If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2 driver, then the driver will be ok. One can then run a V4L1 application, and it will work. It turns out the problem is with norm changing and the crop support that was added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was set too across opens. If one changes the norm via V4L1, the cropping parameters are not reset like they should be, and they'll remain broken across device opens. This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl VIDIOCSCHAN handler. The norm is set via the existing call to set_input(), which calls set_tvnorm(), which will reset the cropping values now that it is able to detect the norm change. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 03 July 2007, 18:11:14 UTC
872aad4 pata_pcmcia: Switch to ata_sff_port_start PCMCIA doesn't use DMA and as this driver is used on many platforms we don't want it to fail on those that define the DMA alloc API as a NULL return Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 03 July 2007, 15:31:06 UTC
a0ac38f pata_pdc202xx_old: Correct cable detect logic We got it backwards and now the other detects are fixed it shows up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 03 July 2007, 14:11:12 UTC
d6f4d5e ata_generic: Check the right register for the DMA enabled flags Mirrors change in IT821X Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 03 July 2007, 14:09:29 UTC
ee58150 pata_ali: fix UDMA settings This patch was found to fix some of the problems with the pata_ali driver. https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=156482 Signed-off-by: Jeff Garzik <jeff@garzik.org> 03 July 2007, 14:06:45 UTC
d9f9c6b sata_mv: PCI-ID for Adaptec 1430SA SATA Controller Signed-off-by: Florian Attenberger <valdyn@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 03 July 2007, 14:06:35 UTC
4031826 libata: fix assigned IRQ reporting host->irq and host->irq2 should be set before ata_host_register() for IRQ reporting to work. Move up host->irq assignment in ata_host_activate() and add it to ata_pci_init_one() native path and pata_cs5520. The port info printing in ata_host_register() doesn't fit all the different controllers. It should probably be moved out to LLDs with some helpers in the future. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 03 July 2007, 14:06:35 UTC
aa2e09d ACPI: fix acpi_osi=!Linux Need to check for special case "acpi_osi=!Linux" before handling the general case "acpi_osi=!*", or it will have no effect. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 July 2007, 04:06:48 UTC
52c4d73 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Partial error clean up unmaps wrong address mlx4_core: Add new Mellanox device IDs 03 July 2007, 04:05:35 UTC
ca9c5ff Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: remove zero-sized include/asm-blackfin/macros.h Blackfin arch: update board defconfig files Blackfin arch: Fix up remaining printks with proper log levels Blackfin arch: Add proper -mcpu option according to the cpu and silicon revision configuration 03 July 2007, 04:05:14 UTC
c1fa238 Merge branch 'upstream-linus2' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus2' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_nv: undo merge error 03 July 2007, 04:04:36 UTC
b59449b Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: 3c589_cs: fix local_bh_enable warning RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon module unload drivers/net/ns83820.c: fix a check-after-use net/usb/cdc_ether minor sparse cleanup RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registers RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctly dm9601: Return 0 from bind() on success Update MAINTAINERS for USB network devices usbnet: Zero padding byte if there is tail room in skb dm9601: HW header size shouldn't be included in packet length starfire list alpha as 64 bit arch myri10ge: SET_NETDEV_DEV() gianfar: Fix typo bug introduced by move to udp_hdr() [PATCH] libertas: remove private ioctls [PATCH] libertas: fix WPA associations by handling ENABLE_RSN correctly [PATCH] libertas: kill wlan_scan_process_results [PATCH] libertas: style fixes 03 July 2007, 04:01:38 UTC
fffe566 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: PATA-mode fixes for sis_sata libata: add HTS541616J9SA00 to NCQ blacklist sata_nv: allow changing queue depth sata_inic162x: disable LBA48 devices libata: remove reading alt_status from ata_hsm_qc_complete() libata: pata_pdc2027x PLL input clock fix scsi disk help file is not complete 03 July 2007, 04:01:13 UTC
dcf87a2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: add Kconfig help on building both stacks firewire: fix async reception on big endian machines 03 July 2007, 03:59:54 UTC
841adfc IPoIB/cm: Partial error clean up unmaps wrong address If a page can't be allocated for the frag list of a skb, the code to unmap the partially allocated list is off by one. For exaple, if 'frags' equals one, i == 0, and the alloc_page() fails, then the old loop would have unmapped mapping[1] which is uninitialized. The same would happen if the call to ib_dma_map_page() failed. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> 03 July 2007, 03:48:31 UTC
786f238 mlx4_core: Add new Mellanox device IDs Add new IDs for PCIe gen2 devices. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> 03 July 2007, 03:41:35 UTC
7718457 Blackfin arch: remove zero-sized include/asm-blackfin/macros.h This file accidentally got truncated instead of deleted in commit df30b11. Signed-off-by: Marco Roeland <marco.roeland@xs4all.nl> Cc: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Alex Riesen <raa.lkml@gmail.com> Cc: Robin Getz <robin.getz@analog.com> Acked-by: Bryan Wu <bryan.wu@analog.com> 03 July 2007, 00:25:50 UTC
531e3a6 [libata] sata_nv: undo merge error Only the ADMA entry was supposed to be able to change queue depth. Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 22:12:19 UTC
63ac9b9 3c589_cs: fix local_bh_enable warning Russell King wrote: > Having upgraded from 2.6.16 to 2.6.22-rc6, I'm now seeing the following. > > Looks like netfilter is calling local_bh_enable() with IRQs disabled, > which would appear to be illegal. Thankfully, this is a warn-once > warning. > > WARNING: at /home/rmk/git/linux-2.6-rmk/kernel/softirq.c:138 local_bh_enable() > [...] > [<c01447fc>] (nf_conntrack_destroy+0x0/0x2c) from [<c012c05c>] (__kfree_skb+0xd0/0x100) > [<c012bf8c>] (__kfree_skb+0x0/0x100) from [<c012c0d8>] (kfree_skb+0x4c/0x50) > r5:c12a3800 r4:00000300 > [<c012c08c>] (kfree_skb+0x0/0x50) from [<bf03cbb0>] (el3_start_xmit+0xb8/0xd0 [3c589_cs]) > [<bf03caf8>] (el3_start_xmit+0x0/0xd0 [3c589_cs]) from [<c01324dc>] (dev_hard_start_xmit+0x1a8/0x244) > r7:c12a3800 r6:c1a9aa00 r5:c1a9aa00 r4:c12a3800 > [<c0132334>] (dev_hard_start_xmit+0x0/0x244) from [<c013fcc0>] (__qdisc_run+0xb0/0x198) Thats a bug in the 3c589_cs driver. Patch attached. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:50:46 UTC
a3cabb2 libata: PATA-mode fixes for sis_sata Changed PATA handler for PATA-ports used by sata_sis. This patch was originally submitted by Jeff Garzik. Added PCI-ID 1180 for SiS966 Controller in pata_sis. The 1180 mode is fully compatible to other SiS PATA-controller. The PCI-ID 1183 is SATA in PATA-emulation, but not fully compatible to SiS5513/5518. sata_sis.c is forwarding this ID to pata_sis. 1183 is not working if simply added to pata_sis. This handling fixes issues with SiS968. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:17:42 UTC
e14cbfa libata: add HTS541616J9SA00 to NCQ blacklist Another member of HTS5416* family doing spurious NCQ completion. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Enrico Sardi <enricoss@tiscali.it> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:14:02 UTC
1e0b5ab sata_nv: allow changing queue depth The sata_nv driver was missing the change_queue_depth hook in the SCSI host template which the other NCQ-capable libata drivers had. This made it impossible to change the queue depth by user request. Add this in. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:14:02 UTC
90c9378 sata_inic162x: disable LBA48 devices sata_inic162x can't do LBA48 properly yet and is likely to corrupt data on drives larger than LBA28 limit. Disable LBA48 devices during device configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:12:34 UTC
74cdbba libata: remove reading alt_status from ata_hsm_qc_complete() In ata_hsm_qc_complete(): Calling ata_altstatus() after the qc is completed might race with next qc. Remove it. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:12:34 UTC
8c781bf libata: pata_pdc2027x PLL input clock fix Recently the PLL input clock of pata_pdc2027x is sometimes detected higer than expected (e.g. 20.027 MHz compared to 16.714 MHz). It seems sometimes the mdelay() function is not as precise as it used to be. Per Alan's advice, HT or power management might affect the precision of mdelay(). This patch calls gettimeofday() to mesure the time elapsed and calculate the PLL input clock accordingly. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:12:34 UTC
abcdceb scsi disk help file is not complete On Mon, 11 Jun 2007 20:28:16 +0200 api wrote: > Good day, > When doing make menuconfig one comes across CONFIG_BLK_DEV_SD. > The help file states that this is for scsi disks.NO MENTION IS MADE THAT > IT IS NEEDE FOR SATA DISKS AS WELL! > Would have saved me a lot of time if the help was up to date. > I hope this can be changed so others can make a kernel for sata systems > quicker. From: Randy Dunlap <randy.dunlap@oracle.com> Add help info for BLK_DEV_SD referring to its use in SATA or PATA driver configurations. Add help text for "ATA" indicating that it probably needs some SCSI config symbols enabled in order to be useful. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 14:12:34 UTC
1f750a7 [ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resume The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 July 2007, 12:39:37 UTC
756813c [ARM] 4454/1: Use word accesses in Versatile PCI config reads ARM Versatile PCI config reads of one byte width have the lowest two bits of the address cleared and result in reading from a wrong place in the config space. This change is to use word size accesses like it is done for halfword reads. Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed). Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 July 2007, 12:39:35 UTC
96acb6e RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon module unload Resending patch 3/3 only. These changes allow driver close routine to be called during module unload, to clean-up buffers and other software resources, flush queues etc. Also, hardware is reset to pristine state. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> 02 July 2007, 12:24:52 UTC
back to top