Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
0173a32 Linus Torvalds 26 October 2008, 19:13:29 UTC Linux 2.6.28-rc2 .. fix all the worst problems in -rc1 26 October 2008, 19:13:29 UTC
d1a35e4 Geert Uytterhoeven 26 October 2008, 18:51:14 UTC m68k: Disable Amiga serial console support if modular If CONFIG_AMIGA_BUILTIN_SERIAL=m, I get the following warnings: | drivers/char/amiserial.c: At top level: | drivers/char/amiserial.c:2138: warning: data definition has no type or storage class | drivers/char/amiserial.c:2138: warning: type defaults to 'int' in declaration of 'console_initcall' | drivers/char/amiserial.c:2138: warning: parameter names (without types) in function declaration | drivers/char/amiserial.c:2134: warning: 'amiserial_console_init' defined but not used because console_initcall() is not defined (nor really sensible) in the modular case. So disable serial console support if the driver is modular. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 19:11:21 UTC
9ce209d Davide Libenzi 17 October 2008, 23:17:40 UTC epoll: avoid double-inserts in case of EFAULT In commit f337b9c58332bdecde965b436e47ea4c94d30da0 ("epoll: drop unnecessary test") Thomas found that there is an unnecessary (always true) test in ep_send_events(). The callback never inserts into ->rdllink while the send loop is performed, and also does the ~EP_PRIVATE_BITS test. Given we're holding the mutex during this time, the conditions tested inside the loop are always true. HOWEVER. The test "!ep_is_linked(&epi->rdllink)" wasn't there because we insert into ->rdllink, but because the send-events loop might terminate before the whole list is scanned (-EFAULT). In such cases, when the loop terminates early, and when a (leftover) file received an event while we're performing the lockless loop, we need such test to avoid to double insert the epoll items. The list_splice() done a few steps below, will correctly re-insert the ones that were left on "txlist". This should fix the kenrel.org bugzilla entry 11831. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 19:09:49 UTC
4d36a9e Arjan van de Ven 25 October 2008, 19:41:41 UTC select: deal with math overflow from borderline valid userland data Some userland apps seem to pass in a "0" for the seconds, and several seconds worth of usecs to select(). The old kernels accepted this just fine, so the new kernels must too. However, due to the upscaling of the microseconds to nanoseconds we had some cases where we got math overflow, and depending on the GCC version (due to inlining decisions) that actually resulted in an -EINVAL return. This patch fixes this by adding the excess microseconds to the seconds field. Also with thanks to Marcin Slusarz for spotting some implementation bugs in the diagnostics patches. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 18:22:08 UTC
44a504c Arjan van de Ven 26 October 2008, 17:25:30 UTC wireless: fix regression caused by regulatory config option The default for the regulatory compatibility option is wrong; if you picked the default you ended up with a non-functional wifi system (at least I did on Fedora 9 with iwl4965). I don't think even the October 2008 releases of the various distros has the new userland so clearly the default is wrong, and also we can't just go about deleting this in 2.6.29... Change the default to "y" and also adjust the config text a little to reflect this. This patch fixes regression #11859 With thanks to Johannes Berg for the diagnostics Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 17:38:52 UTC
2077776 Stephen Rothwell 21 October 2008, 05:11:20 UTC cgroup: remove unused variable /scratch/sfr/next/kernel/cgroup.c: In function 'cgroup_tasks_start': /scratch/sfr/next/kernel/cgroup.c:2107: warning: unused variable 'i' Introduced in commit cc31edceee04a7b87f2be48f9489ebb72d264844 "cgroups: convert tasks file to use a seq_file with shared pid array". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 16:38:17 UTC
b1cd2ee Linus Torvalds 26 October 2008, 16:36:19 UTC Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6 * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX hwmon: (abituguru3) Cosmetic whitespace fixes hwmon: (adt7473) Fix voltage conversion routines hwmon: (lm90) Add support for the LM99 16 degree offset hwmon: (lm90) Fix handling of hysteresis value hwmon-vid: Add support for AMD family 10h CPUs hwmon: (w83781d) Fix linking when built-in 26 October 2008, 16:36:19 UTC
e383d56 Francois Romieu 26 October 2008, 16:02:49 UTC r8169: revert "read MAC address from EEPROM on init" This reverts commit 7bf6bf4803df1adc927f585168d2135fb019c698. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 16:35:05 UTC
1137fb6 Al Viro 26 October 2008, 05:40:26 UTC arm ide breakage a) semicolon before the function body is a bad idea b) it's const struct foo, not struct const foo c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver() d) compiling is occasionally useful. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 16:35:05 UTC
ce97e13 Al Viro 26 October 2008, 05:12:34 UTC fix allmodconfig breakage If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 16:35:05 UTC
c02d656 Alistair John Strachan 26 October 2008, 16:04:40 UTC hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX Switch the AW9D-MAX over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 26 October 2008, 16:04:40 UTC
4777e4e Alistair John Strachan 26 October 2008, 16:04:40 UTC hwmon: (abituguru3) Cosmetic whitespace fixes As the probable result of zealous copy/pasting, many supported boards contain sensor names with trailing whitespace. Though this is not a huge problem, it is inconsistent with other sensor names, and with other similar hwmon drivers. Additionally, the DMI nag message added in 2.6.27 was missing a space between two sentence fragments -- might as well clean that up too. Doesn't alter any kernel text, just data. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 26 October 2008, 16:04:40 UTC
be821b7 Jean Delvare 26 October 2008, 16:04:40 UTC hwmon: (adt7473) Fix voltage conversion routines Fix voltage conversion routines. Based on an earlier patch from Paulius Zaleckas. According to the datasheet voltage is scaled with resistors and value 192 is nominal voltage. 0 is 0V. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Darrick J. Wong <djwong@us.ibm.com> 26 October 2008, 16:04:40 UTC
97ae60b Jean Delvare 26 October 2008, 16:04:39 UTC hwmon: (lm90) Add support for the LM99 16 degree offset The LM99 differs from the LM86, LM89 and LM90 in that it reports remote temperatures (temp2) 16 degrees lower than they really are. So far we have been cheating and handled this in userspace but it really should be handled by the driver directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> 26 October 2008, 16:04:39 UTC
ec38fa2 Jean Delvare 26 October 2008, 16:04:39 UTC hwmon: (lm90) Fix handling of hysteresis value There are several problems in the way the hysteresis value is handled by the lm90 driver: * In show_temphyst(), specific handling of the MAX6646 is missing, so the hysteresis is reported incorrectly if the critical temperature is over 127 degrees C. * In set_temphyst(), the new hysteresis register value is written to the chip but data->temp_hyst isn't updated accordingly, so there is a short period of time (up to 2 seconds) where the old hystereris value will be returned while the new one is already active. * In set_temphyst(), the critical temperature which is used as a base to compute the value of the hysteresis register lacks device-specific handling. As a result, the value of the hysteresis register might be incorrect for the ADT7461 and MAX6646 chips. Fix these 3 bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Nate Case <ncase@xes-inc.com> 26 October 2008, 16:04:39 UTC
1b87182 Jean Delvare 26 October 2008, 16:04:39 UTC hwmon-vid: Add support for AMD family 10h CPUs The AMD family 10h CPUs use the same VID decoding table as the family 0Fh CPUs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz> 26 October 2008, 16:04:39 UTC
dd56b63 Geert Uytterhoeven 26 October 2008, 16:04:38 UTC hwmon: (w83781d) Fix linking when built-in When w83781d is built-in, the final links fails with the following vague error message: `.exit.text' referenced in section `.init.text' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o w83781d_isa_unregister() cannot be marked __exit, as it's also called from sensors_w83781d_init(), which is marked __init. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 26 October 2008, 16:04:38 UTC
23cf24c Linus Torvalds 26 October 2008, 02:57:30 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix duplicate entries returned from getdents() system call ext3: Fix duplicate entries returned from getdents() system call 26 October 2008, 02:57:30 UTC
4403b40 Linus Torvalds 26 October 2008, 02:53:38 UTC Revert "Call init_workqueues before pre smp initcalls." This reverts commit a802dd0eb5fc97a50cf1abb1f788a8f6cc5db635 by moving the call to init_workqueues() back where it belongs - after SMP has been initialized. It also moves stop_machine_init() - which needs workqueues - to a later phase using a core_initcall() instead of early_initcall(). That should satisfy all ordering requirements, and was apparently the reason why init_workqueues() was moved to be too early. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 October 2008, 02:53:38 UTC
3c37fc8 Theodore Ts'o 25 October 2008, 15:39:08 UTC ext4: Fix duplicate entries returned from getdents() system call Fix a regression caused by commit d0156417, "ext4: fix ext4_dx_readdir hash collision handling", where deleting files in a large directory (requiring more than one getdents system call), results in some filenames being returned twice. This was caused by a failure to update info->curr_hash and info->curr_minor_hash, so that if the directory had gotten modified since the last getdents() system call (as would be the case if the user is running "rm -r" or "git clean"), a directory entry would get returned twice to the userspace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> This patch fixes the bug reported by Markus Trippelsdorf at: http://bugzilla.kernel.org/show_bug.cgi?id=11844 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> 26 October 2008, 02:37:55 UTC
8c9fa93 Theodore Ts'o 25 October 2008, 15:38:37 UTC ext3: Fix duplicate entries returned from getdents() system call Fix a regression caused by commit 6a897cf4, "ext3: fix ext3_dx_readdir hash collision handling", where deleting files in a large directory (requiring more than one getdents system call), results in some filenames being returned twice. This was caused by a failure to update info->curr_hash and info->curr_minor_hash, so that if the directory had gotten modified since the last getdents() system call (as would be the case if the user is running "rm -r" or "git clean"), a directory entry would get returned twice to the userspace. This patch fixes the bug reported by Markus Trippelsdorf at: http://bugzilla.kernel.org/show_bug.cgi?id=11844 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> 26 October 2008, 02:37:44 UTC
e013e13 Jens Axboe 24 October 2008, 07:22:42 UTC libata: fix bug with non-ncq devices The recent commit 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e ("libata: switch to using block layer tagging support") to enable support for block layer tagging in libata was broken for non-NCQ devices The block layer initializes the tag field to -1 to detect invalid uses of a tag, and if the libata devices does NOT support NCQ, we just used that field to index the internal command list. So we need to check for -1 first and only use the tag field if it's valid. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Paul Mundt <lethal@linux-sh.org> Tested-by: Dave Young <hidave.darkstar@gmail.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 October 2008, 15:22:38 UTC
57f8f7b Linus Torvalds 24 October 2008, 03:06:52 UTC Linux 2.6.28-rc1 24 October 2008, 03:06:52 UTC
325dcfd Randy Dunlap 24 October 2008, 01:14:55 UTC Fix PCI hotplug printk format Fix printk format warning: drivers/pci/hotplug/acpiphp_ibm.c:207: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 October 2008, 02:48:29 UTC
3a2c5da Linus Torvalds 24 October 2008, 02:31:34 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove unused resource assignment in pci_read_bridge_bases() PCI hotplug: shpchp: message refinement PCI hotplug: shpchp: replace printk with dev_printk PCI: add routines for debugging and handling lost interrupts PCI hotplug: pciehp: message refinement PCI: fix ARI code to be compatible with mixed ARI/non-ARI systems PCI hotplug: cpqphp: fix kernel NULL pointer dereference 24 October 2008, 02:31:34 UTC
2242d5e Linus Torvalds 24 October 2008, 02:19:54 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) tcp: Restore ordering of TCP options for the sake of inter-operability net: Fix disjunct computation of netdev features sctp: Fix to handle SHUTDOWN in SHUTDOWN_RECEIVED state sctp: Fix to handle SHUTDOWN in SHUTDOWN-PENDING state sctp: Add check for the TSN field of the SHUTDOWN chunk sctp: Drop ICMP packet too big message with MTU larger than current PMTU p54: enable 2.4/5GHz spectrum by eeprom bits. orinoco: reduce stack usage in firmware download path ath5k: fix suspend-related oops on rmmod [netdrvr] fec_mpc52xx: Implement polling, to make netconsole work. qlge: Fix MSI/legacy single interrupt bug. smc911x: Make the driver safer on SMP smc911x: Add IRQ polarity configuration smc911x: Allow Kconfig dependency on ARM sis190: add identifier for Atheros AR8021 PHY 8139x: reduce message severity on driver overlap igb: add IGB_DCA instead of selecting INTEL_IOATDMA igb: fix tx data corruption with transition to L0s on 82575 ehea: Fix memory hotplug support netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driver ... 24 October 2008, 02:19:54 UTC
5579a78 Linus Torvalds 24 October 2008, 02:19:14 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: math-emu: Fix thinko in _FP_DIV math-emu: Fix signalling of underflow and inexact while packing result. sparc: Add checkstack support sparc: correct section of current_pc() sparc: correct section of apc_no_idle sparc64: Fix race in arch/sparc64/kernel/trampoline.S 24 October 2008, 02:19:14 UTC
a491913 Zhao, Yu 13 October 2008, 13:02:27 UTC PCI: remove unused resource assignment in pci_read_bridge_bases() This cleanup removes the resource assignment in pci_read_bridge_bases() since it has taken care by pci_alloc_child_bus() when allocating the bus: /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RES_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; child->resource[i]->name = child->name; } Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 23:17:47 UTC
be7bce2 Taku Izumi 23 October 2008, 02:54:39 UTC PCI hotplug: shpchp: message refinement This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 23:14:00 UTC
f98ca31 Taku Izumi 23 October 2008, 02:52:12 UTC PCI hotplug: shpchp: replace printk with dev_printk This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 23:11:50 UTC
969907a Linus Torvalds 23 October 2008, 23:08:11 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c ide-disk: set non-rotational queue flag for SSD and CF devices ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list ide: Add tx4938ide driver (v2) TXx9: Add TX4938 ATA support (v3) ide: Add tx4939ide driver (v6) ide: two more pci_ioremap_bar() conversions pci: use pci_ioremap_bar() in drivers/ide sgiioc4: use ide_host_add() (take 2) sgiioc4: fix error cleanup path (take 2) 23 October 2008, 23:08:11 UTC
ea54168 Linus Torvalds 23 October 2008, 23:07:32 UTC Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds * 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds/acpi: Fix merge fallout from acpi_driver_data change leds: Simplify logic in leds-ams-delta leds: Fix trigger registration race leds: Fix leds-class.c comment leds: Add driver for HP harddisk protection LEDs leds: leds-pca955x - Mark pca955x_led_set() static leds: Remove uneeded leds-cm-x270 driver leds: Remove uneeded strlen calls leds: Add leds-wrap default-trigger leds: Make default trigger fields const leds: Add backlight LED trigger leds: da903x: Add support for LEDs found on DA9030/DA9034 23 October 2008, 23:07:32 UTC
0d876c6 Linus Torvalds 23 October 2008, 23:06:49 UTC Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: corgi backlight driver should not select ssp drivers [ARM] 5321/1: Kirkwood: fix typo in Makefile [ARM] 5320/1: fix assembly constraints in implementation of do_div() [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S [ARM] 5316/1: AT91: oops (regression) fix on gpio irq [ARM] msm: vreg interface to msm7k pmic [ARM] msm: dma: various basic dma improvements and bugfixes [ARM] msm: clock: provide clk_*() api support for [ARM] msm: clean up iomap and devices [ARM] msm: add proc_comm support, necessary for clock and power control [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c" 23 October 2008, 23:06:49 UTC
900bca3 Linus Torvalds 23 October 2008, 23:05:59 UTC Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight * 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Add driver for Tabletkiosk Sahara TouchIT-213 Tablet PC backlight: da903x: Add backlight driver for DA9030/DA9034 tosa: add support for bl/lcd driver backlight: add support for Sharp SL-6000 LCD and backlight drivers 23 October 2008, 23:05:59 UTC
2fca5cc Jens Axboe 22 October 2008, 07:34:49 UTC libata: switch to using block layer tagging support libata currently has a pretty dumb ATA_MAX_QUEUE loop for finding a free tag to use. Instead of fixing that up, convert libata to using block layer tagging - gets rid of code in libata, and is also much faster. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 October 2008, 23:05:26 UTC
388c8c1 James Bottomley 03 August 2008, 18:02:12 UTC PCI: add routines for debugging and handling lost interrupts We're getting a lot of storage drivers blamed for interrupt misrouting issues. This patch provides a standard way of reporting the problem ... and, if possible, correcting it. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 21:54:18 UTC
18b341b Taku Izumi 23 October 2008, 02:47:32 UTC PCI hotplug: pciehp: message refinement This patch refines messages in pciehp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 21:47:39 UTC
8113587 Zhao, Yu 23 October 2008, 05:15:39 UTC PCI: fix ARI code to be compatible with mixed ARI/non-ARI systems The original ARI support code has a compatibility problem with non-ARI devices. If a device doesn't support ARI, turning on ARI forwarding on its upper level bridge will cause undefined behavior. This fix turns on ARI forwarding only when the subordinate devices support it. Tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 21:42:13 UTC
d2174c3 Kenji Kaneshige 17 October 2008, 00:23:51 UTC PCI hotplug: cpqphp: fix kernel NULL pointer dereference The following patch fixes the regression in 2.6.27 that causes kernel NULL pointer dereference at cpqphp driver probe time. This patch should be backported to the .27 stable series. Seems to have been introduced by f46753c5e354b857b20ab8e0fe7b2579831dc369. The root cause of this problem seems that cpqphp driver calls pci_hp_register() wrongly. In current implementation, cpqphp driver passes 'ctrl->pci_dev->subordinate' as a second parameter for pci_hp_register(). But because hotplug slots and it's hotplug controller (exists as a pci funcion) are on the same bus, it should be 'ctrl->pci_dev->bus' instead. Cc: <stable@kernel.org> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 23 October 2008, 21:40:06 UTC
601a1b9 Stephen Rothwell 23 October 2008, 21:35:19 UTC leds/acpi: Fix merge fallout from acpi_driver_data change Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com> 23 October 2008, 21:35:19 UTC
fa3fd72 Bartlomiej Zolnierkiewicz 23 October 2008, 21:24:20 UTC ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:24:20 UTC
c77380d Bartlomiej Zolnierkiewicz 23 October 2008, 21:22:09 UTC ide-disk: set non-rotational queue flag for SSD and CF devices Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:09 UTC
64c2eae Márton Németh 23 October 2008, 21:22:09 UTC ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list The "TEAC CD-ROM CD-224E" cannot close its tray, so add it to the NO_AUTOCLOSE list. This will correct the "Can close tray" field of /proc/sys/dev/cdrom/info. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Borislav Petkov <petkovbb@gmail.com> [bart: minor fixups to patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:09 UTC
2850284 Atsushi Nemoto 23 October 2008, 21:22:08 UTC ide: Add tx4938ide driver (v2) This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode. It has custom set_pio_mode and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:08 UTC
5d1d2f8 Atsushi Nemoto 23 October 2008, 21:22:08 UTC TXx9: Add TX4938 ATA support (v3) Add a helper routine to register tx4938ide driver and use it on RBTX4938 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:08 UTC
3789798 Atsushi Nemoto 23 October 2008, 21:22:07 UTC ide: Add tx4939ide driver (v6) This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:07 UTC
1f1ab27 Arjan van de Ven 23 October 2008, 21:22:07 UTC ide: two more pci_ioremap_bar() conversions based on suggestion from Sergei Shtylyov, there are two more places where using pci_ioremap_bar() makes sense. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:07 UTC
2834356 Arjan van de Ven 23 October 2008, 21:22:07 UTC pci: use pci_ioremap_bar() in drivers/ide Use the newly introduced pci_ioremap_bar() function in drivers/ide. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:07 UTC
95a84cd Sergei Shtylyov 23 October 2008, 21:22:06 UTC sgiioc4: use ide_host_add() (take 2) Convert the driver to use ide_host_add() -- this seems to be a straightforward change which I'm not sure why hasn't been done yet... While doing this at last, get rid of: - useless local copy of the 'sgiioc4_port_info' variable; - unnecessary 'goto' and label... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:06 UTC
3059ef9 Sergei Shtylyov 23 October 2008, 21:22:06 UTC sgiioc4: fix error cleanup path (take 2) The driver "forgot" to call iounmap() iff request_mem_region() call failed in sgiioc4_ide_setup_pci_device()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 23 October 2008, 21:22:06 UTC
6ffab0e Russell King 23 October 2008, 21:06:53 UTC [ARM] pxa: corgi backlight driver should not select ssp drivers Resolves build errors with eseries and magician defconfigs (which make use of the corgi backlight driver.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 23 October 2008, 21:07:14 UTC
fd6149d Ilpo Järvinen 23 October 2008, 21:06:35 UTC tcp: Restore ordering of TCP options for the sake of inter-operability This is not our bug! Sadly some devices cannot cope with the change of TCP option ordering which was a result of the recent rewrite of the option code (not that there was some particular reason steming from the rewrite for the reordering) though any ordering of TCP options is perfectly legal. Thus we restore the original ordering to allow interoperability with/through such broken devices and add some warning about this trap. Since the reordering just happened without any particular reason, this change shouldn't cost us anything. There are already couple of known failure reports (within close proximity of the last release), so the problem might be more wide-spread than a single device. And other reports which may be due to the same problem though the symptoms were less obvious. Analysis of one of the case revealed (with very high probability) that sack capability cannot be negotiated as the first option (SYN never got a response). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: Aldo Maggi <sentiniate@tiscali.it> Tested-by: Aldo Maggi <sentiniate@tiscali.it> Signed-off-by: David S. Miller <davem@davemloft.net> 23 October 2008, 21:06:35 UTC
332edc2 Linus Torvalds 23 October 2008, 20:02:48 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: staging: pcc_acpi: delete obsolete driver 23 October 2008, 20:02:48 UTC
f8aea20 Linus Torvalds 23 October 2008, 20:02:03 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits) [SCSI] sd: fix computation of the full size of the device [SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact [SCSI] sun3x_esp: Convert && to || [SCSI] sd: remove command-size switching code [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] fix netlink kernel-doc [SCSI] sd: Fix handling of NO_SENSE check condition [SCSI] export busy state via q->lld_busy_fn() [SCSI] refactor sdev/starget/shost busy checking [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver. [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!) [SCSI] ipr: use memory_read_from_buffer() [SCSI] aic79xx: fix shadowed variables [SCSI] aic79xx: fix shadowed variables, add statics [SCSI] aic7xxx: update *_shipped files [SCSI] aic7xxx: update .reg files [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser [SCSI] scsi_dh: Initialize path state to be passive when path is not owned ... 23 October 2008, 20:02:03 UTC
c3c9897 Linus Torvalds 23 October 2008, 19:38:39 UTC Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix section mismatch warning - apic_x2apic_phys x86: fix section mismatch warning - apic_x2apic_cluster x86: fix section mismatch warning - apic_x2apic_uv_x x86: fix section mismatch warning - apic_physflat x86: fix section mismatch warning - apic_flat x86: memtest fix use of reserve_early() x86 syscall.h: fix argument order x86/tlb_uv: remove strange mc146818rtc include x86: remove redundant KERN_DEBUG on pr_debug x86: do_boot_cpu - check if we have ESR register x86: MAINTAINERS change for AMD microcode patch loader x86/proc: fix /proc/cpuinfo cpu offline bug x86: call dmi-quirks for HP Laptops after early-quirks are executed x86, kexec: fix hang on i386 when panic occurs while console_sem is held MCE: Don't run 32bit machine checks with interrupts on x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: make variables static 23 October 2008, 19:38:39 UTC
f81db82 Len Brown 23 October 2008, 19:14:52 UTC staging: pcc_acpi: delete obsolete driver pcc_acpi is based on an old version of drivers/misc/panasonic-laptop.c Signed-off-by: Len Brown <len.brown@intel.com> 23 October 2008, 19:31:09 UTC
d244118 Linus Torvalds 23 October 2008, 19:07:17 UTC Fix compile warning in kernel/params.c Move free_module_param_attrs() into the CONFIG_MODULES section, since it's only used inside there. Thus avoiding the warning kernel/params.c:514: warning: 'free_module_param_attrs' defined but not used Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 October 2008, 19:09:00 UTC
88ed86f Linus Torvalds 23 October 2008, 19:04:37 UTC Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc * 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: (35 commits) proc: remove fs/proc/proc_misc.c proc: move /proc/vmcore creation to fs/proc/vmcore.c proc: move pagecount stuff to fs/proc/page.c proc: move all /proc/kcore stuff to fs/proc/kcore.c proc: move /proc/schedstat boilerplate to kernel/sched_stats.h proc: move /proc/modules boilerplate to kernel/module.c proc: move /proc/diskstats boilerplate to block/genhd.c proc: move /proc/zoneinfo boilerplate to mm/vmstat.c proc: move /proc/vmstat boilerplate to mm/vmstat.c proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c proc: move /proc/buddyinfo boilerplate to mm/vmstat.c proc: move /proc/vmallocinfo to mm/vmalloc.c proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c proc: move /proc/slab_allocators boilerplate to mm/slab.c proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c proc: move /proc/stat to fs/proc/stat.c proc: move rest of /proc/partitions code to block/genhd.c proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c proc: move /proc/devices code to fs/proc/devices.c proc: move rest of /proc/locks to fs/locks.c ... 23 October 2008, 19:04:37 UTC
3856d30 Christoph Hellwig 23 October 2008, 18:33:29 UTC ext4: remove unused variable in ext4_get_parent Signed-off-by: Christoph Hellwig <hch@lst.de> [ All users removed in "switch all filesystems over to d_obtain_alias", aka commit 440037287c5ebb07033ab927ca16bb68c291d309 ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 October 2008, 19:03:23 UTC
fd55cd3 Nicolas Pitre 23 October 2008, 18:35:09 UTC [ARM] 5321/1: Kirkwood: fix typo in Makefile Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 23 October 2008, 18:58:19 UTC
f3161f3 Linus Torvalds 23 October 2008, 18:54:08 UTC pcc-acpi: fix compile with new stricter ACPI types This was another merge problem that wasn't a data conflict, but due to independent changes in two branches that just didn't work together. The pcc-acpi staging driver used acpi_driver_data(device) = hotkey; to set driver data, but the ACPI merge made that invalid in commit db89b4f0dbab837d0f3de2c3e9427a8d5393afa3 ("ACPI: catch calls of acpi_driver_data on pointer of wrong type"), and now you're supposed to just do. device->driver_data = hotkey; instead. Fix it up. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 October 2008, 18:54:08 UTC
12e1ec9 Linus Torvalds 23 October 2008, 18:48:56 UTC ext3 quota support: fix compile failure This one was due to a merge error: we added a use of nd.path in commit 2d7c820e56ce83b23daee9eb5343730fb309418e ("ext3: add checks for errors from jbd"), and concurrently we got rid of 'nd' and used a naked 'path' in commit 8264613def2e5c4f12bc3167713090fd172e6055 ("[PATCH] switch quota_on-related stuff to kern_path()"). That all merged cleanly, but it didn't actually _work_. This should fix it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 October 2008, 18:48:56 UTC
1f6d6e8 Linus Torvalds 23 October 2008, 17:53:02 UTC Merge branch 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) hrtimers: add missing docbook comments to struct hrtimer hrtimers: simplify hrtimer_peek_ahead_timers() hrtimers: fix docbook comments DECLARE_PER_CPU needs linux/percpu.h hrtimers: fix typo rangetimers: fix the bug reported by Ingo for real rangetimer: fix BUG_ON reported by Ingo rangetimer: fix x86 build failure for the !HRTIMERS case select: fix alpha OSF wrapper select: fix alpha OSF wrapper hrtimer: peek at the timer queue just before going idle hrtimer: make the futex() system call use the per process slack value hrtimer: make the nanosleep() syscall use the per process slack hrtimer: fix signed/unsigned bug in slack estimator hrtimer: show the timer ranges in /proc/timer_list hrtimer: incorporate feedback from Peter Zijlstra hrtimer: add a hrtimer_start_range() function hrtimer: another build fix hrtimer: fix build bug found by Ingo hrtimer: make select() and poll() use the hrtimer range feature ... 23 October 2008, 17:53:02 UTC
db563fc Linus Torvalds 23 October 2008, 17:43:36 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: handle the TCP_Server_Info->tsk field more carefully cifs: fix unlinking of rename target when server doesn't support open file renames [CIFS] improve setlease handling [CIFS] fix saving of resume key before CIFSFindNext cifs: make cifs_rename handle -EACCES errors [CIFS] fix build error [CIFS] undo changes in cifs_rename_pending_delete if it errors out cifs: track DeletePending flag in cifsInodeInfo cifs: don't use CREATE_DELETE_ON_CLOSE in cifs_rename_pending_delete [CIFS] eliminate usage of kthread_stop for cifsd [CIFS] Add nodfs mount option 23 October 2008, 17:43:36 UTC
eb81071 Linus Torvalds 23 October 2008, 17:42:55 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: aoa i2sbus: don't overwrite module parameter ALSA: ASoC: tlv320aic3x: Fix DSP DAI format and signal polarities matching ALSA: ASoC: OMAP: Continue fixing DSP DAI format in McBSP DAI driver ALSA: Ensure PXA runtime data is initialised ALSA: hda - correct bracketing in spdif test in patch_sigmatel.c ALSA: hda - Fix conflicting volume controls on ALC260 23 October 2008, 17:42:55 UTC
5f4f0c4 Linus Torvalds 23 October 2008, 17:28:25 UTC compat_blkdev_driver_ioctl: Remove unused variable warning Variable 'ret' is no longer used. Don't declare it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 October 2008, 17:28:25 UTC
54d822a Linus Torvalds 23 October 2008, 17:23:31 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: Fix GPIO initcall breakage avr32: Scale loops_per_jiffy when cpu frequency changes avr32: Fix bug in LCD pin setup on port C avr32: Add defconfig for the favr-32 board avr32: Add defconfig for the mimc200 board avr32: Add MIMC200 board support avr32: Fix MIMC200 board use of SPD network pins avr32: add support for EarthLCD Favr-32 board avr32: Add support for EVKLCD10X addon boards avr32: Kconfig: Remove pointless if around atstk1000 include 23 October 2008, 17:23:31 UTC
2248485 Linus Torvalds 23 October 2008, 17:23:07 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev * git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits) [PATCH] kill the rest of struct file propagation in block ioctls [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET [PATCH] get rid of blkdev_locked_ioctl() [PATCH] get rid of blkdev_driver_ioctl() [PATCH] sanitize blkdev_get() and friends [PATCH] remember mode of reiserfs journal [PATCH] propagate mode through swsusp_close() [PATCH] propagate mode through open_bdev_excl/close_bdev_excl [PATCH] pass fmode_t to blkdev_put() [PATCH] kill the unused bsize on the send side of /dev/loop [PATCH] trim file propagation in block/compat_ioctl.c [PATCH] end of methods switch: remove the old ones [PATCH] switch sr [PATCH] switch sd [PATCH] switch ide-scsi [PATCH] switch tape_block [PATCH] switch dcssblk [PATCH] switch dasd [PATCH] switch mtd_blkdevs [PATCH] switch mmc ... 23 October 2008, 17:23:07 UTC
5ed487b Linus Torvalds 23 October 2008, 17:22:40 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (46 commits) [PATCH] fs: add a sanity check in d_free [PATCH] i_version: remount support [patch] vfs: make security_inode_setattr() calling consistent [patch 1/3] FS_MBCACHE: don't needlessly make it built-in [PATCH] move executable checking into ->permission() [PATCH] fs/dcache.c: update comment of d_validate() [RFC PATCH] touch_mnt_namespace when the mount flags change [PATCH] reiserfs: add missing llseek method [PATCH] fix ->llseek for more directories [PATCH vfs-2.6 6/6] vfs: add LOOKUP_RENAME_TARGET intent [PATCH vfs-2.6 5/6] vfs: remove LOOKUP_PARENT from non LOOKUP_PARENT lookup [PATCH vfs-2.6 4/6] vfs: remove unnecessary fsnotify_d_instantiate() [PATCH vfs-2.6 3/6] vfs: add __d_instantiate() helper [PATCH vfs-2.6 2/6] vfs: add d_ancestor() [PATCH vfs-2.6 1/6] vfs: replace parent == dentry->d_parent by IS_ROOT() [PATCH] get rid of on-stack dentry in udf [PATCH 2/2] anondev: switch to IDA [PATCH 1/2] anondev: init IDR statically [JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup() [PATCH] Optimise NFS readdir hack slightly. ... 23 October 2008, 17:22:40 UTC
5b34653 Linus Torvalds 23 October 2008, 17:22:01 UTC Merge branch 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits) x86: canonicalize remaining header guards x86: drop double underscores from header guards x86: Fix ASM_X86__ header guards x86, um: get rid of uml-config.h x86, um: get rid of arch/um/Kconfig.arch x86, um: get rid of arch/um/os symlink x86, um: get rid of excessive includes of uml-config.h x86, um: get rid of header symlinks x86, um: merge Kconfig.i386 and Kconfig.x86_64 x86, um: get rid of sysdep symlink x86, um: trim the junk from uml ptrace-*.h x86, um: take vm-flags.h to sysdep x86, um: get rid of uml asm/arch x86, um: get rid of uml highmem.h x86, um: get rid of uml unistd.h x86, um: get rid of system.h -> system.h include x86, um: uml atomic.h is not needed anymore x86, um: untangle uml ldt.h x86, um: get rid of more uml asm/arch uses x86, um: remove dead header (uml module-generic.h; never used these days) ... 23 October 2008, 17:22:01 UTC
bfd4e66 Takashi Iwai 23 October 2008, 17:20:54 UTC Merge branches 'topic/asoc', 'topic/misc-fixes' and 'topic/hda' into for-linus 23 October 2008, 17:20:54 UTC
765426e Linus Torvalds 23 October 2008, 17:20:36 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits) dock: make dock driver not a module ACPI: fix ia64 build warning ACPI: hack around sysfs warning with link order ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n intel_menlo: fix build warning panasonic-laptop: fix build ACPICA: Update version to 20080926 ACPICA: Add support for zero-length buffer-to-string conversions ACPICA: New: Validation for predefined ACPI methods/objects ACPICA: Fix for implicit return compatibility ACPICA: Fixed a couple memory leaks associated with "implicit return" ACPICA: Optimize buffer allocation procedure ACPICA: Fix possible memory leak, error exit path ACPICA: Fix fault after mem allocation failure in AML parser ACPICA: Remove unused ACPI register bit definition ACPICA: Update version to 20080829 ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname ACPICA: Cleanup for internal Reference Object ACPICA: Update comments - no functional changes ACPICA: Update for Reference ACPI_OPERAND_OBJECT ... 23 October 2008, 17:20:36 UTC
36ec891 Linus Torvalds 23 October 2008, 17:20:15 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: asm/gpio.h needs linux/kernel.h for might_sleep()/WARN_ON(). sh: mach-highlander: Handle SCIF pinmuxing on R7785RP. sh: sh7785 pinmux support sh: update defconfigs. sh: Kill off unused p1fc divisors from SH7763 clk fwk. sh: improve pinmux support for single direction pins sh: use 10MHz VIO_CLK for ov772x on Migo-R sh: Update gpio_set_value() pin value handling sh: update ov772x byte order on Migo-R rtc: Add R2025S/D comment to rs5c372 Kconfig entry. sh: Export cache flush routines needed by sh_eth on SH7619. sh: Wire up oops reporting in the die notifier chain. sh: ap325rxa: Kill off unused port definitions. sh: Hook up PB0->PB7 input-only pins in SH7203 PFC. sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization. sh: add support FLCTL for ap325rxa board sh: gpio: Stub in dummy GPIO<->IRQ mapping routines. sh: rsk7203: leds-gpio support for RSK+ LEDs. sh: gpio: Include asm-generic/gpio.h for non-gpiolib stubs. sh: fix soc-camera compile breakage on Migo-R. ... 23 October 2008, 17:20:15 UTC
70740d6 Linus Torvalds 23 October 2008, 17:18:40 UTC Merge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Avoid oops in DRM_IOCTL_RM_DRAW if a bad handle is supplied. drm: Add 32-bit compatibility for DRM_IOCTL_UPDATE_DRAW. drm/i915: use pipes, not planes to label vblank data drm/i915: hold dev->struct_mutex and DRM lock during vblank ring operations i915: Fix format string warnings on x86-64. i915: Don't dereference HWS in /proc debug files when it isn't initialized. i915: Enable IMR passthrough of vblank events before enabling it in pipestat. drm: Remove two leaks of vblank reference count in error paths. drm: fix leak of cliprects in drm_rmdraw() i915: Disable MSI on GM965 (errata says it doesn't work) drm: Set cliprects to NULL when changing drawable to having 0 cliprects. i915: Protect vblank IRQ reg access with spinlock 23 October 2008, 17:18:40 UTC
a3415dc Linus Torvalds 23 October 2008, 17:16:53 UTC Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (32 commits) PCI hotplug: fix logic in Compaq hotplug controller bus speed setup PCI: don't export linux/io.h from pci.h PCI: PCI_QUIRKS depends on PCI PCI hotplug: pciehp: poll data link layer link active PCI hotplug: pciehp: fix possible memory leak in pcie_init PCI: Workaround invalid P2P bridge bus numbers PCI Hotplug: fakephp: add duplicate slot name debugging PCI: Hotplug core: remove 'name' PCI: shcphp: remove 'name' parameter PCI: SGI Hotplug: stop managing bss_hotplug_slot->name PCI: rpaphp: kmalloc/kfree slot->name directly PCI: pciehp: remove 'name' parameter PCI: ibmphp: stop managing hotplug_slot->name PCI: fakephp: remove 'name' parameter PCI, PCI Hotplug: introduce slot_name helpers PCI: cpqphp: stop managing hotplug_slot->name PCI: cpci_hotplug: stop managing hotplug_slot->name PCI: acpiphp: remove 'name' parameter PCI: prevent duplicate slot names PCI Hotplug: serialize pci_hp_register and pci_hp_deregister ... 23 October 2008, 17:16:53 UTC
b4d0b08 Linus Torvalds 23 October 2008, 17:14:45 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix sparse warnings 9p: rdma: RDMA Transport Support for 9P 9p: fix format warning 9p: fix debug build error 23 October 2008, 17:14:45 UTC
3321737 Linus Torvalds 23 October 2008, 17:14:23 UTC Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux * 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: nfsd: clean up expkey_parse error cases nfsd: Drop reference in expkey_parse error cases nfsd: Fix memory leak in nfsd_getxattr NFSD: Fix BUG during NFSD shutdown processing 23 October 2008, 17:14:23 UTC
feeedc6 Linus Torvalds 23 October 2008, 17:10:25 UTC Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6 * 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Add info->archdata field i2c: Inform about deprecated chips directory i2c: Use pci_ioremap_bar() Schedule removal of the legacy i2c device driver binding model i2c: Clean up <linux/i2c.h> i2c: Update and clean up writing-clients document i2c: Drop 2-byte address block transfer defines i2c: Delete legacy model documentation i2c: Constify i2c_get_clientdata's parameter i2c: Delete outdated client porting guide i2c: Make clear what the class field of i2c_adapter is good for i2c-algo-pcf: Fix typo in debugging log message i2c-algo-pcf: Add adapter hooks around xfer begin and end i2c-algo-pcf: Pass adapter data into ->waitforpin() method i2c-i801: Add support for Intel Ibex Peak 23 October 2008, 17:10:25 UTC
a270283 Linus Torvalds 23 October 2008, 17:09:50 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't rebind drivers after failed resume or reset USB: fix memory leak in cdc-acm USB: Unusual dev for Mio moov 330 gps USB: cdc-wdm: make module autoload work USB: Fix unneeded endpoint check in pxa27x_udc usb/gadget: fix kernel-doc warning USB: Speedtouch: add pre_reset and post_reset routines USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative USB: support Huawei data card product IDs USB: add ZTE MF626 USB GSM modem entry USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc USB: ohci: add support for tmio-ohci cell 23 October 2008, 17:09:50 UTC
4543237 Linus Torvalds 23 October 2008, 17:09:33 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (42 commits) Staging: usbip: fix build warning on 64bit kernels Staging: me4000: remove some compiler warnings Staging: wbusb: fix a bunch of compiler warnings Staging: w35und: module init cleanup Staging: w35und: use gotos for error handling Staging: w35und: remove spinlock wrappers Staging: sxg: fix compiler warnings. Staging: sxg: fix up unused function warnings Staging: sxg: clean up C99 comments Staging: Lindent the echo driver Staging: SLICOSS: Free multicast list at driver exit Staging: PCC-ACPI: Fix all checkpatch errors Staging: pcc-acpi: update to latest version Staging: Clean up sxg driver Staging: remove remaining uses of __FUNCTION__ Staging: add poch driver Staging: wlan-ng: fix build error if wireless networking is not enabled Staging: echo: remove annoying "end of function" markers Staging: echo: remove __cplusplus macro magic Staging: echo: remove dead code ... 23 October 2008, 17:09:33 UTC
92fb83a Linus Torvalds 23 October 2008, 17:05:40 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits) OProfile: Fix buffer synchronization for IBS oprofile: hotplug cpu fix oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in drivers/oprofile/* x86/oprofile: add the logic for enabling additional IBS bits x86/oprofile: reordering functions in nmi_int.c x86/oprofile: removing unused function parameter in add_ibs_begin() oprofile: more whitespace fixes oprofile: whitespace fixes OProfile: Rename IBS sysfs dir into "ibs_op" OProfile: Rework string handling in setup_ibs_files() OProfile: Rework oprofile_add_ibs_sample() function oprofile: discover counters for op ppro too oprofile: Implement Intel architectural perfmon support oprofile: Don't report Nehalem as core_2 oprofile: drop const in num counters field Revert "Oprofile Multiplexing Patch" x86, oprofile: BUG: using smp_processor_id() in preemptible code x86/oprofile: fix on_each_cpu build error ... Manually fixed trivial conflicts in drivers/oprofile/{cpu_buffer.c,event_buffer.h} 23 October 2008, 17:05:40 UTC
a534487 Linus Torvalds 23 October 2008, 17:00:14 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: stop_machine: fix error code handling on multiple cpus stop_machine: use workqueues instead of kernel threads workqueue: introduce create_rt_workqueue Call init_workqueues before pre smp initcalls. Make panic= and panic_on_oops into core_params Make initcall_debug a core_param core_param() for genuinely core kernel parameters param: Fix duplicate module prefixes module: check kernel param length at compile time, not runtime Remove stop_machine during module load v2 module: simplify load_module. 23 October 2008, 17:00:14 UTC
296e1ce Linus Torvalds 23 October 2008, 16:59:29 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (36 commits) V4L/DVB (9336): cx88: always de-alloc frontends on fault condition V4L/DVB (9335): videobuf: split unregister bus creating self-contained frontend de-allocator V4L/DVB (9334): cx88: dvb_remove debug output V4L/DVB (9333): cx88: Not all boards that requires cx88-mpeg has frontends V4L/DVB (9332): cx88: initial fix for analogue only compilation V4L/DVB (9331): Remove unused inode parameter from video_ioctl2 V4L/DVB (9330): Get rid of inode parameter at v4l_compat_translate_ioctl() V4L/DVB (9328): ivtvfb: FB_BLANK_POWERDOWN turns off video output V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d V4L/DVB (9326): ivtv: avoid green flashing when loading ivtv V4L/DVB (9325): ivtv: switch to unlocked_ioctl. V4L/DVB (9324): v4l2: add video_ioctl2_unlocked for unlocked_ioctl support. V4L/DVB (9323): v4l2-int-if: Add enum_framesizes and enum_frameintervals ioctls. V4L/DVB (9322): v4l2-int-if: Export more interfaces to modules V4L/DVB (9321): v4l2-int-if: Define new power state changes V4L/DVB (9320): v4l2: Add 10-bit RAW Bayer formats V4L/DVB (9319): v4l2-int-if: Add cropcap, g_crop and s_crop commands. V4L/DVB (9318): v4l2-int-if: Add command to get slave private data. V4L/DVB (9316): s5h1411: Power down s5h1411 when not in use V4L/DVB (9315): s5h1411: Skip reconfiguring demod modulation if already at the desired modulation ... 23 October 2008, 16:59:29 UTC
b14ea38 Linus Torvalds 23 October 2008, 16:57:16 UTC Merge branch 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: NOHZ: fix thinko in the timer restart code path 23 October 2008, 16:57:16 UTC
6770ab5 Linus Torvalds 23 October 2008, 16:53:14 UTC Merge git://git.infradead.org/iommu-2.6 * git://git.infradead.org/iommu-2.6: Admit to maintaining VT-d, for my sins. dmar: fix uninitialised 'ret' variable in dmar_parse_dev() intel-iommu: use coherent_dma_mask in alloc_coherent amd_iommu: fix nasty bug that caused ILLEGAL_DEVICE_TABLE_ENTRY errors intel-iommu: IA64 support dmar: remove the quirk which disables dma-remapping when intr-remapping enabled dmar: Use queued invalidation interface for IOTLB and context invalidation dmar: context cache and IOTLB invalidation using queued invalidation dmar: use spin_lock_irqsave() in qi_submit_sync() 23 October 2008, 16:53:14 UTC
326528a Linus Torvalds 23 October 2008, 16:52:39 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: remove useless subdirs from drivers/ide/ 23 October 2008, 16:52:39 UTC
3e5cce6 Linus Torvalds 23 October 2008, 16:50:12 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: tidy local_init dm: remove unused flush_all dm raid1: separate region_hash interface part1 dm: mark split bio as cloned dm crypt: remove waitqueue dm crypt: fix async split dm crypt: tidy sector dm: remove dm header from targets dm: publish array_too_big dm exception store: fix misordered writes dm exception store: refactor zero_area dm snapshot: drop unused last_percent dm snapshot: fix primary_pe race dm kcopyd: avoid queue shuffle 23 October 2008, 16:50:12 UTC
520a2c2 H. Peter Anvin 14 October 2008, 18:34:20 UTC [SCSI] sd: fix computation of the full size of the device When computing the full size of the device, we need to cast sdkp->capacity before shifting, since in some configurations sector_t can be a 32-bit number. Also, change ffz(~x) to the more idiomatic ilog2(x). Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:20 UTC
a865959 H. Peter Anvin 14 October 2008, 18:34:21 UTC [SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact We would hang forever when passing a zero to string_get_size(). Furthermore, string_get_size() would produce decimals on a value small enough to be exact. Finally, a few formatting issues are inconsistent with standard SI style guidelines. - If the value is less than the divisor, skip the entire rounding step. This prints out all small values including zero as integers, without decimals. - Add a space between the value and the symbol for the unit, consistent with standard SI practice. - Lower case k in kB since we are talking about powers of 10. - Finally, change "int" to "unsigned int" in one place to shut up a gcc warning when compiling the code out-of-kernel for testing. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:20 UTC
3fe68cc Julia Lawall 14 October 2008, 16:00:19 UTC [SCSI] sun3x_esp: Convert && to || The pattern !E && !E->fld is nonsensical. The patch below updates this according to the assumption that && should be ||. But perhaps another solution was intended. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @disable and_comm@ expression E; identifier fld; @@ - !E && !E->fld + !E || !E->fld // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-By: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:19 UTC
d4c9b73 Alan Stern 10 October 2008, 20:03:20 UTC [SCSI] sd: remove command-size switching code This patch (as1138) removes from sd.c some old code for switching from 10-byte commands to 6-byte commands. This code is redundant -- the switching for READ and WRITE is already handled in scsi_io_completion() and the switching for MODE SENSE is already handled in scsi_mode_sense(). (There is no comparable switch for MODE SELECT, but I doubt one is needed.) Furthermore the other handlers do a better job; they check for appropriate ASC and ASCQ values before blindly switching the size. The code in sd.c is known to cause problems with some devices by switching when it shouldn't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:19 UTC
36a5292 FUJITA Tomonori 11 October 2008, 07:00:00 UTC [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API Since the commit 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 (sg: disable interrupts inside sg_copy_buffer), no need to disable interrupts before calling scsi_sg_copy_from_buffer. So we can simplify twa_scsiop_execute_scsi_complete() a bit, which disables interrupts just for scsi_sg_copy_from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:18 UTC
0723d4a FUJITA Tomonori 09 October 2008, 02:25:42 UTC [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API Since the commit 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 (sg: disable interrupts inside sg_copy_buffer), no need to disable interrupts before calling scsi_sg_copy_from_buffer. So we can simplify tw_transfer_internal, which disables interrupts just for scsi_sg_copy_from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>\ Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:17 UTC
aa198bf Randy Dunlap 13 October 2008, 16:15:09 UTC [SCSI] fix netlink kernel-doc Fix kernel-doc warning: the function short description must be on one line and the previous comment is not kernel-doc but it was confusing scripts/kernel-doc. Warning(lin2627-g3-kdocfixes//drivers/scsi/scsi_netlink.c:221): No description found for parameter 'skb' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:17 UTC
10dab22 Jamie Wellnitz 12 September 2008, 01:39:36 UTC [SCSI] sd: Fix handling of NO_SENSE check condition The current handling of NO_SENSE check condition is the same as RECOVERED_ERROR, and assumes that in both cases, the I/O was fully transferred. We have seen cases of arrays returning with NO_SENSE (no error), but the I/O was not completely transferred, thus residual set. Thus, rather than return good_bytes as the entire transfer, set good_bytes to 0, so that the midlayer then applies the residual in calculating the transfer, and for sd, will fail the I/O and fall into a retry path. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:17 UTC
6c5121b Kiyoshi Ueda 04 October 2008, 18:11:35 UTC [SCSI] export busy state via q->lld_busy_fn() This patch implements q->lld_busy_fn() for scsi mid layer to export its busy state for request stacking drivers. For efficiency, no lock is taken to check the busy state of shost/starget/sdev, since the returned value is not guaranteed and may be changed after request stacking drivers call the function, regardless of taking lock or not. When scsi can't dispatch I/Os anymore and needs to kill I/Os (e.g. !sdev), scsi needs to return 'not busy'. Otherwise, request stacking drivers may hold requests forever. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
9d11251 Kiyoshi Ueda 04 October 2008, 18:11:06 UTC [SCSI] refactor sdev/starget/shost busy checking This patch refactors the busy checking codes of scsi_device, Scsi_Host and scsi_target. There should be no functional change. This is a preparation for another patch which exports scsi's busy state to the block layer for request stacking drivers. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
22ab019 Bernd Schubert 23 September 2008, 13:28:58 UTC [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver. Make SPI timeout 10s the same as SAS Signed-off-by: Bernd Schubert <bs@q-leap.de> Acked-by: "Prakash, Sathya" <Sathya.Prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
7583221 thomas schorpp 03 October 2008, 21:45:29 UTC [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume Take the Diag/Activity-LED of the HBA out of diagnostic mode on PM resume after successful PM resume from standby and HBA restart, it remained always on before. If something fails before complete recovery, it should remain on, since it is a diagnostics LED, reason for the used higher layer for the clear. Signed-off-by: thomas.schorpp@gmail.com Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
d91ab4e Alan Cox 23 September 2008, 16:26:30 UTC [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!) MHZ not Mhz for SI unit pedants Closes bug #6422 Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:15 UTC
back to top