Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
45beca0 Linus Torvalds 02 November 2008, 22:17:19 UTC Linux v2.6.28-rc3 02 November 2008, 22:17:19 UTC
ae29a18 Linus Torvalds 02 November 2008, 21:32:26 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-gd: re-get capacity on revalidate tx4938ide: Avoid underflow on calculation of a wait cycle tx4938ide: Do not call devm_ioremap for whole 128KB tx4938ide: Check minimum cycle time and SHWT range (v2) ide: Switch to a common address ide-cd: fix DMA alignment regression 02 November 2008, 21:32:26 UTC
52ebb43 Borislav Petkov 02 November 2008, 20:40:10 UTC ide-gd: re-get capacity on revalidate We need to re-get a removable media's capacity when revalidating the disk so that its partitions get rescanned by the block layer. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: axboe@kernel.dk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 02 November 2008, 20:40:10 UTC
7afa053 Atsushi Nemoto 02 November 2008, 20:40:10 UTC tx4938ide: Avoid underflow on calculation of a wait cycle Make 'wt' variable signed while it can be negative during calculation. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 02 November 2008, 20:40:10 UTC
9d4eb0a Atsushi Nemoto 02 November 2008, 20:40:09 UTC tx4938ide: Do not call devm_ioremap for whole 128KB Call devm_ioremap() for CS0 and CS1 separetely. And some style cleanups. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 02 November 2008, 20:40:09 UTC
630a8b2 Atsushi Nemoto 02 November 2008, 20:40:09 UTC tx4938ide: Check minimum cycle time and SHWT range (v2) SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx release to address invalid hold time, so it actualy applies 4 times and so constitutes -DIOx recovery time. Check requirement of the recovery time and cycle time. Also check SHWT maximum value. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 02 November 2008, 20:40:09 UTC
ccd32e2 Alan Cox 02 November 2008, 20:40:08 UTC ide: Switch to a common address Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 02 November 2008, 20:40:08 UTC
9bd27cb Borislav Petkov 02 November 2008, 20:40:07 UTC ide-cd: fix DMA alignment regression e5318b531b008c79d2a0c0df06a7b8628da38e2f ("ide: use the dma safe check for REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading performance and ultimately causing an excessive amount of underruns. The issue is documented also in: http://bugzilla.kernel.org/show_bug.cgi?id=11742. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Valerio Passini <valerio.passini@unicam.it> [bart: fixup patch description per comments from Sergei Shtylyov] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> 02 November 2008, 20:40:07 UTC
0bf82cc Linus Torvalds 02 November 2008, 18:16:44 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix PCI resource mapping on sparc64 sparc64: Kill annoying warning when building compat_binfmt_elf.o sparc32: kernel/trace/trace.c wants DIE_OOPS sparc64: Fix __copy_{to,from}_user_inatomic defines. 02 November 2008, 18:16:44 UTC
391e572 Linus Torvalds 02 November 2008, 18:15:52 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) af_unix: netns: fix problem of return value IRDA: remove double inclusion of module.h udp: multicast packets need to check namespace net: add documentation for skb recycling key: fix setkey(8) policy set breakage bpa10x: free sk_buff with kfree_skb xfrm: do not leak ESRCH to user space net: Really remove all of LOOPBACK_TSO code. netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys() netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys net: delete excess kernel-doc notation pppoe: Fix socket leak. gianfar: Don't reset TBI<->SerDes link if it's already up gianfar: Fix race in TBI/SerDes configuration at91_ether: request/free GPIO for PHY interrupt amd8111e: fix dma_free_coherent context atl1: fix vlan tag regression SMC91x: delete unused local variable "lp" myri10ge: fix stop/go mmio ordering bonding: fix panic when taking bond interface down before removing module ... 02 November 2008, 18:15:52 UTC
4ac9657 Jeff Garzik 02 November 2008, 14:51:27 UTC linux/string.h: fix comment typo s/user/used/ Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 November 2008, 18:15:07 UTC
5769907 Max Dmitrichenko 02 November 2008, 07:34:10 UTC sparc64: Fix PCI resource mapping on sparc64 There is a problem discovered in recent versions of ATI Mach64 driver in X.org on sparc64 architecture. In short, the driver fails to mmap MMIO aperture (PCI resource #2). I've found that kernel's __pci_mmap_make_offset() returns EINVAL. It checks whether user attempts to mmap more than the resource length, which is 0x1000 bytes in our case. But PAGE_SIZE on SPARC64 is 0x2000 and this is what actually is being mmaped. So __pci_mmap_make_offset() failed for this PCI resource. Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 07:34:10 UTC
a1995a6 David S. Miller 02 November 2008, 07:15:38 UTC sparc64: Kill annoying warning when building compat_binfmt_elf.o GCC warns because some tests against 32-bit values never evaluate to true due to how TASK_SIZE is defined. I always wanted to mimick powerpc's definition of TASK_SIZE, which is simply TASK_SIZE_OF(current) and that also fixes the warning. Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 07:15:38 UTC
e68f0ae Al Viro 02 November 2008, 04:44:01 UTC sparc32: kernel/trace/trace.c wants DIE_OOPS Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 04:44:01 UTC
145e1c0 Hugh Dickins 02 November 2008, 04:41:40 UTC sparc64: Fix __copy_{to,from}_user_inatomic defines. Alexander Beregalov reports oops in __bzero() called from copy_from_user_fixup() called from iov_iter_copy_from_user_atomic(), when running dbench on tmpfs on sparc64: its __copy_from_user_inatomic and __copy_to_user_inatomic should be avoiding, not calling, the fixups. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 04:41:40 UTC
48dcc33 Jianjun Kong 02 November 2008, 04:37:27 UTC af_unix: netns: fix problem of return value fix problem of return value net/unix/af_unix.c: unix_net_init() when error appears, it should return 'error', not always return 0. Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 04:37:27 UTC
abdd5a0 Alexander Beregalov 02 November 2008, 04:30:50 UTC IRDA: remove double inclusion of module.h Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 04:30:50 UTC
920a461 Eric Dumazet 02 November 2008, 04:22:23 UTC udp: multicast packets need to check namespace Current UDP multicast delivery is not namespace aware. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 04:22:23 UTC
d1a203e Stephen Hemminger 02 November 2008, 04:01:09 UTC net: add documentation for skb recycling Commit 04a4bb55bcf35b63d40fd2725e58599ff8310dd7 ("net: add skb_recycle_check() to enable netdriver skb recycling") added a method for network drivers to recycle skbuffs, but while use of this mechanism was documented in the commit message, it should really have been added as a docbook comment as well -- this patch does that. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2008, 04:01:09 UTC
c10555f Al Viro 01 November 2008, 18:20:29 UTC sparc32: kernel/trace/trace.c wants DIE_OOPS Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 19:40:38 UTC
37b2a17 Al Viro 01 November 2008, 18:20:19 UTC el3_common_init() should be __devinit, not __init Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 19:40:38 UTC
9ca6823 Al Viro 01 November 2008, 18:19:59 UTC missing dependencies on HAVE_CLK in drivers/mfd Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 19:40:38 UTC
f5ee051 Al Viro 01 November 2008, 18:20:39 UTC section fixes for cirrusfb cirrusfb_zorro_unmap() may be called both from __devexit and (on cleanup path) from __devinit. So it needs to be a normal function, same as for cirrusfb_pci_unmap() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 19:40:38 UTC
2895974 Al Viro 01 November 2008, 18:20:09 UTC PM_TEST_SUSPEND should depend on RTC_CLASS, not RTC_LIB Insufficient dependency - we really want CONFIG_RTC_CLASS=y there. That will give us CONFIG_RTC_LIB=y, so the old dependency can be simply replaced. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 19:40:38 UTC
4b30fbd Al Viro 01 November 2008, 18:19:49 UTC oss: fix O_NONBLOCK in dmasound_core We broke O_NONBLOCK handling in OSS dmasound_core in 2.3.11-pre3 - the original code copied f_flags to open_mode and then checked for O_NONBLOCK in there, but that got changed to copying f_mode and O_NONBLOCK has not reached that field in any kernel version. Since we do not care for any other bits, the fix is obvious... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 19:40:38 UTC
67d1128 Linus Torvalds 01 November 2008, 17:36:30 UTC Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix AMDC1E and XTOPOLOGY conflict in cpufeature x86: build fix 01 November 2008, 17:36:30 UTC
d3f1580 Huang Weiyi 31 October 2008, 04:47:23 UTC init/do_mounts_md.c: remove duplicated #include Removed duplicated #include <linux/delay.h> in init/do_mounts_md.c. The same compile error ("error: implicit declaration of function 'msleep'") got fixed twice: - f8b77d39397e1510b1a3bcfd385ebd1a45aae77f ("init/do_mounts_md.c: msleep compile fix") - 73b4a24f5ff09389ba6277c53a266b142f655ed2 ("init/do_mounts_md.c must #include <linux/delay.h>") by people adding the <linux/delay.h> include in two slightly different places. Andrew's quilt scripts happily ignore the fuzz, and will re-apply the patch even though they had conflicts. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 17:35:51 UTC
1f98757 Linus Torvalds 01 November 2008, 17:17:22 UTC x86: Clean up late e820 resource allocation This makes the late e820 resources use 'insert_resource_expand_to_fit()' instead of doing a 'reserve_region_with_split()', and also avoids marking them as IORESOURCE_BUSY. This results in us being perfectly happy to use pre-existing PCI resources even if they were marked as being in a reserved region, while still avoiding any _new_ allocations in the reserved regions. It also makes for a simpler and more accurate resource tree. Example resource allocation from Jonathan Corbet, who has firmware that has an e820 reserved entry that covered a big range (e0000000-fed003ff), and that had various PCI resources in it set up by firmware. With old kernels, the reserved range would force us to re-allocate all pre-existing PCI resources, and his reserved range would end up looking like this: e0000000-fed003ff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 where only the pre-allocated special regions (IOAPIC and HPET) were kept around. With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's resource tree looked like this: e0000000-fe7fffff : reserved fe800000-fe8fffff : PCI Bus 0000:01 fe800000-fe8fffff : reserved fe900000-fe9d9aff : reserved fe9d9b00-fe9d9bff : 0000:00:1f.3 fe9d9b00-fe9d9bff : reserved fe9d9c00-fe9d9fff : 0000:00:1a.7 fe9d9c00-fe9d9fff : reserved fe9da000-fe9dafff : 0000:00:03.3 fe9da000-fe9dafff : reserved fe9db000-fe9dbfff : 0000:00:19.0 fe9db000-fe9dbfff : reserved fe9dc000-fe9dffff : 0000:00:1b.0 fe9dc000-fe9dffff : reserved fe9e0000-fe9fffff : 0000:00:19.0 fe9e0000-fe9fffff : reserved fea00000-fea7ffff : 0000:00:02.0 fea00000-fea7ffff : reserved fea80000-feafffff : 0000:00:02.1 fea80000-feafffff : reserved feb00000-febfffff : 0000:00:02.0 feb00000-febfffff : reserved fec00000-fed003ff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 and because the reserved entry had been split and moved into the individual resources, and because it used the IORESOURCE_BUSY flag, the drivers that actually wanted to _use_ those resources couldn't actually attach to them: e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff] HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff] with this patch, the resource tree instead becomes e0000000-fed003ff : reserved fe800000-fe8fffff : PCI Bus 0000:01 fe9d9b00-fe9d9bff : 0000:00:1f.3 fe9d9c00-fe9d9fff : 0000:00:1a.7 fe9d9c00-fe9d9fff : ehci_hcd fe9da000-fe9dafff : 0000:00:03.3 fe9db000-fe9dbfff : 0000:00:19.0 fe9db000-fe9dbfff : e1000e fe9dc000-fe9dffff : 0000:00:1b.0 fe9dc000-fe9dffff : ICH HD audio fe9e0000-fe9fffff : 0000:00:19.0 fe9e0000-fe9fffff : e1000e fea00000-fea7ffff : 0000:00:02.0 fea80000-feafffff : 0000:00:02.1 feb00000-febfffff : 0000:00:02.0 fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 ie the one reserved region now ends up surrounding all the PCI resources that were allocated inside of it by firmware, and because it is not marked BUSY, drivers have no problem attaching to the pre-allocated resources. Reported-and-tested-by: Jonathan Corbet <corbet@lwn.net> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 17:17:22 UTC
42c0202 Linus Torvalds 01 November 2008, 16:53:58 UTC reserve_region_with_split: Fix GFP_KERNEL usage under spinlock This one apparently doesn't generate any warnings, because the function is only used during system bootup, when the warnings are disabled. But it's still very wrong. The __reserve_region_with_split() function is called with the resource_lock held for writing, so it must only ever do GFP_ATOMIC allocations. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 16:53:58 UTC
cdce1f0 Linus Torvalds 01 November 2008, 16:52:43 UTC Merge branch 'link_removal' of git://www.jni.nu/cris * 'link_removal' of git://www.jni.nu/cris: [CRIS] Remove links from CRIS build [CRIS] Merge asm-offsets.c for both arches into one file. 01 November 2008, 16:52:43 UTC
0242909 Linus Torvalds 01 November 2008, 16:51:51 UTC Merge branch 'cris_move' of git://www.jni.nu/cris * 'cris_move' of git://www.jni.nu/cris: [CRIS] Move header files from include to arch/cris/include. [CRISv32] Remove warning in io.h 01 November 2008, 16:51:51 UTC
0a6d2fa Linus Torvalds 01 November 2008, 16:50:38 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: properly handle empty tty_files list 01 November 2008, 16:50:38 UTC
76f8bef Huang Weiyi 31 October 2008, 14:50:04 UTC remove unused #include <version.h>'s The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/leds/leds-hp-disk.c drivers/misc/panasonic-laptop.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 16:50:12 UTC
233e70f Al Viro 31 October 2008, 23:28:30 UTC saner FASYNC handling on file close As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 16:49:46 UTC
3318a38 Serge Hallyn 30 October 2008, 16:52:23 UTC file caps: always start with clear bprm->caps_* While Linux doesn't honor setuid on scripts. However, it mistakenly behaves differently for file capabilities. This patch fixes that behavior by making sure that get_file_caps() begins with empty bprm->caps_*. That way when a script is loaded, its bprm->caps_* may be filled when binfmt_misc calls prepare_binprm(), but they will be cleared again when binfmt_elf calls prepare_binprm() next to read the interpreter's file capabilities. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2008, 16:49:45 UTC
920da69 Alexey Dobriyan 31 October 2008, 23:41:26 UTC key: fix setkey(8) policy set breakage Steps to reproduce: #/usr/sbin/setkey -f flush; spdflush; add 192.168.0.42 192.168.0.1 ah 24500 -A hmac-md5 "1234567890123456"; add 192.168.0.42 192.168.0.1 esp 24501 -E 3des-cbc "123456789012123456789012"; spdadd 192.168.0.42 192.168.0.1 any -P out ipsec esp/transport//require ah/transport//require; setkey: invalid keymsg length Policy dump will bail out with the same message after that. -recv(4, "\2\16\0\0\32\0\3\0\0\0\0\0\37\r\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 +recv(4, "\2\16\0\0\36\0\3\0\0\0\0\0H\t\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 23:41:26 UTC
e06f42d Linus Torvalds 31 October 2008, 22:44:08 UTC Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux * 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: NLM: Set address family before calling nlm_host_rebooted() nfsd: fix failure to set eof in readdir in some situations 31 October 2008, 22:44:08 UTC
37dd0bd Eric Paris 31 October 2008, 21:40:00 UTC SELinux: properly handle empty tty_files list SELinux has wrongly (since 2004) had an incorrect test for an empty tty->tty_files list. With an empty list selinux would be pointing to part of the tty struct itself and would then proceed to dereference that value and again dereference that result. An F10 change to plymouth on a ppc64 system is actually currently triggering this bug. This patch uses list_empty() to handle empty lists rather than looking at a meaningless location. [note, this fixes the oops reported in https://bugzilla.redhat.com/show_bug.cgi?id=469079] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org> 31 October 2008, 22:38:48 UTC
c5ec6fb Jesper Nilsson 22 October 2008, 21:57:53 UTC [CRIS] Remove links from CRIS build Remove the links to architecture and machine dependent directories (boot, lib, drivers, arch, mach) The links were created and used mostly from the arch/cris/Makefile, so why not dispense with them altogether? Changed $(ARCH) to "cris" in Makefile, it is easier to read this way. The CRISv32 head.S common files for the kernel and compressed images needed to be modified to use ifdefs instead of using the now removed mach link. Since there are only two versions, this is not a huge loss in readability. The link to vmlinux.lds.S is also replaced with a merged version which uses ifdefs to select the correct layout. System.map before and after are identical. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> 31 October 2008, 22:37:57 UTC
0365f70 Jesper Nilsson 21 October 2008, 20:10:27 UTC [CRIS] Merge asm-offsets.c for both arches into one file. Eliminates the link to arch specific asm-offsets.c from CRIS architecture build system. Resulting asm-offsets.s are identical before and after change for both arch-v10 and arch-v32. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> 31 October 2008, 22:37:00 UTC
f891caf Linus Torvalds 31 October 2008, 15:14:15 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits) Revert "powerpc: Sync RPA note in zImage with kernel's RPA note" powerpc: Fix compile errors with CONFIG_BUG=n powerpc: Fix format string warning in arch/powerpc/boot/main.c powerpc: Fix bug in kernel copy of libfdt's fdt_subnode_offset_namelen() powerpc: Remove duplicate DMA entry from mpc8313erdb device tree powerpc/cell/OProfile: Fix on-stack array size in activate spu profiling function powerpc/mpic: Fix regression caused by change of default IRQ affinity powerpc: Update remaining dma_mapping_ops to use map/unmap_page powerpc/pci: Fix unmapping of IO space on 64-bit powerpc/pci: Properly allocate bus resources for hotplug PHBs OF-device: Don't overwrite numa_node in device registration powerpc: Fix swapcontext system for VSX + old ucontext size powerpc: Fix compiler warning for the relocatable kernel powerpc: Work around ld bug in older binutils powerpc/ppc64/kdump: Better flag for running relocatable powerpc: Use is_kdump_kernel() powerpc: Kexec exit should not use magic numbers powerpc/44x: Update 44x defconfigs powerpc/40x: Update 40x defconfigs powerpc: enable heap randomization for linkstations ... 31 October 2008, 15:14:15 UTC
1fe01cb Linus Torvalds 31 October 2008, 14:53:17 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (21 commits) sh: fix sh2a cache entry_mask sh: Enable NFS root in Migo-R defconfig. sh: FTRACE renamed to FUNCTION_TRACER. sh: Fix up the shared IRQ demuxer's control bit testing logic. Define SCSPTR1 for SH 7751R sh: Add sci_rxd_in of SH4-202 Add support usb setting on sh 7366 sh: Change register name SCSPTR to SCSPTR2 sh: use the new byteorder headers. sh: SHmedia ISA tuning fixups. sh: Kill off long-dead HD64465 cchip support. sh: Revert "SH 7366 needs SCIF_ONLY" sh: Simplify and lock down the ISA tuning. sh: sh7785lcr: Select uImage as default image target. sh: Add on-chip RTC support for SH7722. SH 7366 needs SCIF_ONLY gdrom: Fix compile error sh: Provide a sample defconfig for the UL2 (SH7366) board. sh: Fix FPU tuning on toolchains with mismatched multilib targets. sh: oprofile: Fix up the SH7750 performance counter name. ... 31 October 2008, 14:53:17 UTC
63b4045 Linus Torvalds 31 October 2008, 14:52:51 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add missing null terminating entry to bq4802_match[]. sparc: use the new byteorder headers rtc-m48t59: shift zero year to 1968 on sparc (rev 2) dbri: check dma_alloc_coherent errors sparc64: remove byteshifting from out* helpers 31 October 2008, 14:52:51 UTC
eff2502 Linus Torvalds 31 October 2008, 14:52:12 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: delay capable() check in ext4_has_free_blocks() merge ext4_claim_free_blocks & ext4_has_free_blocks jbd2: Call the commit callback before the transaction could get dropped ext4: fix a bug accessing freed memory in ext4_abort ext3: fix a bug accessing freed memory in ext3_abort 31 October 2008, 14:52:12 UTC
f73aaf1 Linus Torvalds 31 October 2008, 14:47:57 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: add whitelist for devices with known good pata-sata bridges sata_via: fix support for 5287 libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127 ATA: remove excess kernel-doc notation 31 October 2008, 14:47:57 UTC
5663a12 Paul Mackerras 31 October 2008, 11:27:17 UTC Revert "powerpc: Sync RPA note in zImage with kernel's RPA note" This reverts commit 91a00302959545a9ae423e99732b1e46eb19e877, plus commit 0dcd440120ef12879ff34fc78d7e4abf171c79e4 ("powerpc: Revert CHRP boot wrapper to real-base = 12MB on 32-bit") which depended on it. Commit 91a00302 was causing NVRAM corruption on some pSeries machines, for as-yet unknown reasons, so this reverts it until the cause is identified. Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 11:36:21 UTC
bfb99f8 Paul Mackerras 31 October 2008, 10:34:56 UTC Merge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 31 October 2008, 10:34:56 UTC
ebdba9a Paul Mackerras 31 October 2008, 10:34:09 UTC powerpc: Fix compile errors with CONFIG_BUG=n This makes sure we don't try to call find_bug or is_warning_bug when CONFIG_BUG=n and CONFIG_XMON=y. Otherwise we get these errors: arch/powerpc/xmon/xmon.c: In function ‘print_bug_trap’: arch/powerpc/xmon/xmon.c:1364: error: implicit declaration of function ‘find_bug’ arch/powerpc/xmon/xmon.c:1364: warning: assignment makes pointer from integer without a cast arch/powerpc/xmon/xmon.c:1367: error: implicit declaration of function ‘is_warning_bug’ arch/powerpc/xmon/xmon.c:1374: error: dereferencing pointer to incomplete type make[2]: *** [arch/powerpc/xmon/xmon.o] Error 1 make[1]: *** [arch/powerpc/xmon] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 10:34:09 UTC
2576c99 Venki Pallipadi 07 October 2008, 20:33:12 UTC x86: fix AMDC1E and XTOPOLOGY conflict in cpufeature Impact: fix xsave slowdown regression Fix two features from conflicting in feature bits. Fixes this performance regression: Subject: cpu2000(both float and int) 13% regression with 2.6.28-rc1 http://lkml.org/lkml/2008/10/28/36 Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Bisected-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> 31 October 2008, 10:01:40 UTC
8ba4773 Jon Smirl 30 October 2008, 16:51:32 UTC powerpc: Fix format string warning in arch/powerpc/boot/main.c Fix format string warning in arch/powerpc/boot/main.c. Also correct a typo ("uncomressed") on the same line. BOOTCC arch/powerpc/boot/main.o arch/powerpc/boot/main.c: In function 'prep_kernel': arch/powerpc/boot/main.c:65: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int' Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 09:14:19 UTC
2dccbf4 David Gibson 30 October 2008, 16:37:05 UTC powerpc: Fix bug in kernel copy of libfdt's fdt_subnode_offset_namelen() There's currently an off-by-one bug in fdt_subnode_offset_namelen() which causes it to keep searching after it's finished the subnodes of the given parent, and into the subnodes of siblings of the original node which come after it in the tree. This bug was introduced in commit ed95d7450dcbfeb45ffc9d39b1747aee82b49a51 ("powerpc: Update in-kernel dtc and libfdt to version 1.2.0"). A patch has already been submitted to dtc/libfdt mainline. We don't really want to pull in a new upstream version during the 2.6.28 cycle, but we should still fix this bug, hence this standalone version of the fix for the in-kernel libfdt. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 09:14:19 UTC
b342797 Ingo Molnar 31 October 2008, 08:31:38 UTC x86: build fix Impact: build fix on certain UP configs fix: arch/x86/kernel/cpu/common.c: In function 'cpu_init': arch/x86/kernel/cpu/common.c:1141: error: 'boot_cpu_id' undeclared (first use in this function) arch/x86/kernel/cpu/common.c:1141: error: (Each undeclared identifier is reported only once arch/x86/kernel/cpu/common.c:1141: error: for each function it appears in.) Pull in asm/smp.h on UP, so that we get the definition of boot_cpu_id. Signed-off-by: Ingo Molnar <mingo@elte.hu> 31 October 2008, 08:31:38 UTC
cbafe31 Ilpo Järvinen 31 October 2008, 07:40:19 UTC bpa10x: free sk_buff with kfree_skb Inspired by Sergio Luis' similar patches, I finally found a case which is trivial enough that spatch won't choke on it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 07:40:19 UTC
65325d5 Mike Dyer 29 October 2008, 10:10:06 UTC powerpc: Remove duplicate DMA entry from mpc8313erdb device tree Commit 574366128db29e7da609ec1f9c01bf9d80adec87 added a duplicate DMA controller node. Signed-off-by: Mike Dyer <mike.dyer@provision-comm.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 31 October 2008, 07:38:39 UTC
216813a Yoshihiro Shimoda 07 August 2008, 04:54:59 UTC sh: fix sh2a cache entry_mask fix sh2a cache entry_mask in __flush_{purge,invalidate}_region. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:29:20 UTC
464f763 Kuninori Morimoto 31 October 2008, 07:01:19 UTC sh: Enable NFS root in Migo-R defconfig. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:22:31 UTC
694f94f Paul Mundt 31 October 2008, 07:20:36 UTC sh: FTRACE renamed to FUNCTION_TRACER. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:20:36 UTC
0803d54 Paul Mundt 31 October 2008, 07:18:02 UTC Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 31 October 2008, 07:18:02 UTC
a8884e3 Michael Trimarchi 31 October 2008, 07:10:23 UTC sh: Fix up the shared IRQ demuxer's control bit testing logic. Correct the interrupt handler in sh4 serial device, return the correct value and check for what is anabled in the SCSCR register. The sh7722 is broken just sending a break using minicom. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:10:23 UTC
7abc404 Matt Fleming 29 October 2008, 07:16:02 UTC Define SCSPTR1 for SH 7751R After the recent commit to kill off SCI/SCIF special casing SH 7751R fails to compile with CONFIG_SH_RTS7751R2D set. This is because SCSPTR1 is undefined. Take the value for SCSPTR1 from the SH7751R Group Hardware Manual. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:06:12 UTC
a432226 fernando@oss.ntt.co 23 October 2008, 04:27:19 UTC xfrm: do not leak ESRCH to user space I noticed that, under certain conditions, ESRCH can be leaked from the xfrm layer to user space through sys_connect. In particular, this seems to happen reliably when the kernel fails to resolve a template either because the AF_KEY receive buffer being used by racoon is full or because the SA entry we are trying to use is in XFRM_STATE_EXPIRED state. However, since this could be a transient issue it could be argued that EAGAIN would be more appropriate. Besides this error code is not even documented in the man page for sys_connect (as of man-pages 3.07). Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 07:06:03 UTC
961e9ff Nobuhiro Iwamatsu 29 October 2008, 04:33:45 UTC sh: Add sci_rxd_in of SH4-202 SH4-202 doesn't have SCSXX1. But it is treated so that there is SCSPTR1 in current code. This patch add sci_rxd_in of SH4-202. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:03:41 UTC
47c2968 Kuninori Morimoto 30 October 2008, 05:49:03 UTC Add support usb setting on sh 7366 This patch add usb setting for sh 7366 Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:03:30 UTC
aeffd54 Nobuhiro Iwamatsu 29 October 2008, 04:34:50 UTC sh: Change register name SCSPTR to SCSPTR2 This change a name of SCSPTR used in sci_rxd_in of SH5-101. SCSPTR is not declared and will become the error. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:02:42 UTC
1406266 Harvey Harrison 31 October 2008, 07:01:22 UTC sh: use the new byteorder headers. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 07:01:22 UTC
3a8af72 David S. Miller 31 October 2008, 07:00:33 UTC net: Really remove all of LOOPBACK_TSO code. As noticed by Saikiran Madugula, commit 7447ef63cf2dfdc444f4c72ae13f604350b2e25f ("loopback: Remove rest of LOOPBACK_TSO code.") got rid of emulate_large_send_offload() but didn't get rid of the call site as well. Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 07:00:33 UTC
ddb72b0 Paul Mundt 31 October 2008, 06:58:53 UTC sh: SHmedia ISA tuning fixups. SH-5 doesn't support any elaborate ISA inheritance schemes (-dsp, -up, etc.), so only bother with that if we are building an sh32 kernel. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 31 October 2008, 06:58:53 UTC
e5e7ad4 David S. Miller 31 October 2008, 06:57:40 UTC Merge branch 'master' of git://git.infradead.org/users/pcmoore/lblnet-2.6 31 October 2008, 06:57:40 UTC
61e5744 Alexey Dobriyan 31 October 2008, 06:55:44 UTC netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys() register_pernet_gen_device() can't be used is nf_conntrack_pptp module is also used (compiled in or loaded). Right now, proto_gre_net_exit() is called before nf_conntrack_pptp_net_exit(). The former shutdowns and frees GRE piece of netns, however the latter absolutely needs it to flush keymap. Oops is inevitable. Switch to shiny new register_pernet_gen_subsys() to get correct ordering in netns ops list. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 06:55:44 UTC
485ac57 Alexey Dobriyan 31 October 2008, 06:55:16 UTC netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys netns ops which are registered with register_pernet_gen_device() are shutdown strictly before those which are registered with register_pernet_subsys(). Sometimes this leads to opposite (read: buggy) shutdown ordering between two modules. Add register_pernet_gen_subsys()/unregister_pernet_gen_subsys() for modules which aren't elite enough for entry in struct net, and which can't use register_pernet_gen_device(). PPTP conntracking module is such one. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 06:55:16 UTC
ad1d967 Randy Dunlap 31 October 2008, 06:54:35 UTC net: delete excess kernel-doc notation Remove excess kernel-doc function parameters from networking header & driver files: Warning(include/net/sock.h:946): Excess function parameter or struct member 'sk' description in 'sk_filter_release' Warning(include/linux/netdevice.h:1545): Excess function parameter or struct member 'cpu' description in 'netif_tx_lock' Warning(drivers/net/wan/z85230.c:712): Excess function parameter or struct member 'regs' description in 'z8530_interrupt' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 06:54:35 UTC
194dcdb David S. Miller 31 October 2008, 06:50:18 UTC Merge branch 'davem-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 31 October 2008, 06:50:18 UTC
19b8cba David S. Miller 31 October 2008, 06:35:23 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 31 October 2008, 06:35:23 UTC
263e69c David S. Miller 31 October 2008, 06:11:44 UTC pppoe: Fix socket leak. Move SKB trim before we lookup the socket so we don't have to put it on failure. Based upon an initial patch by Jarek Poplawski and suggestions from Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 06:35:02 UTC
770a424 David S. Miller 31 October 2008, 05:58:06 UTC sparc64: Add missing null terminating entry to bq4802_match[]. Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2008, 05:58:06 UTC
9ce8e30 Jens Axboe 27 August 2008, 13:23:18 UTC libata: add whitelist for devices with known good pata-sata bridges libata currently imposes a UDMA5 max transfer rate and 200 sector max transfer size for SATA devices that sit behind a pata-sata bridge. Lots of devices have known good bridges that don't need this limit applied. The MTRON SSD disks are such devices. Transfer rates are increased by 20-30% with the restriction removed. So add a "blacklist" entry for the MTRON devices, with a flag indicating that the bridge is known good. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 05:45:06 UTC
b9d5b89 Tejun Heo 21 October 2008, 15:46:36 UTC sata_via: fix support for 5287 5287 used to be treated as vt6420 but it didn't work. It's new family of controllers called vt8251 which hosts four SATA ports as M/S of the two ATA ports. This configuration is rather peculiar in that although the M/S devices are on the same port, each have its own SCR (or equivalent link status/control) registers which screws up the port-link-device hierarchy assumed by libata. Another controller which falls into this category is ata_piix w/ SIDPR access. libata now has facility to deal with this class of controllers named slave_link. A low level driver for such controllers can just call ata_slave_link_init() on the respective ports and libata will handle all the difficult parts like following up with single SRST after hardresetting both ports. This patch creates new controller class vt8251, implements slave_link aware init sequence and config space based SCR access for it and moves 5287 to the new class. This patch is based on Joseph Chan's larger patch which was created before slave_link was implemented in libata. http://thread.gmane.org/gmane.linux.kernel.commits.mm/40640 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 05:43:28 UTC
ba14a9c Roland Dreier 28 October 2008, 23:52:20 UTC libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127 In ata_tf_to_lba48(), when evaluating (tf->hob_lbal & 0xff) << 24 the expression is promoted to signed int (since int can hold all values of u8). However, if hob_lbal is 128 or more, then it is treated as a negative signed value and sign-extended when promoted to u64 to | into sectors, which leads to the MSB 32 bits of section getting set incorrectly. For example, Phillip O'Donnell <phillip.odonnell@gmail.com> reported that a 1.5GB drive caused: ata3.00: HPA detected: current 2930277168, native 18446744072344861488 where 2930277168 == 0xAEA87B30 and 18446744072344861488 == 0xffffffffaea87b30 which shows the problem when hob_lbal is 0xae. Fix this by adding a cast to u64, just as is used by for hob_lbah and hob_lbam in the function. Reported-by: Phillip O'Donnell <phillip.odonnell@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 05:42:59 UTC
5b97fbd Randy Dunlap 30 October 2008, 05:35:08 UTC ATA: remove excess kernel-doc notation Remove excess kernel-doc function parameter notation from drivers/ata/: Warning(drivers/ata/libata-core.c:1622): Excess function parameter or struct member 'fn' description in 'ata_pio_queue_task' Warning(drivers/ata/libata-core.c:4655): Excess function parameter or struct member 'err_mask' description in 'ata_qc_complete' Warning(drivers/ata/ata_piix.c:751): Excess function parameter or struct member 'udma' description in 'do_pata_set_dmamode' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 05:42:49 UTC
210434d Carl Love 29 October 2008, 05:06:45 UTC powerpc/cell/OProfile: Fix on-stack array size in activate spu profiling function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). This could potentially cause an oops or random memory corruption since the pm_signal_local array is on the stack. This fixes it. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:13:51 UTC
3c10c9c Kumar Gala 28 October 2008, 18:01:39 UTC powerpc/mpic: Fix regression caused by change of default IRQ affinity The Freescale implementation of MPIC only allows a single CPU destination for non-IPI interrupts. We add a flag to the mpic_init to distinquish these variants of MPIC. We pull in the irq_choose_cpu from sparc64 to select a single CPU as the destination of the interrupt. This is to deal with the fact that the default smp affinity was changed by commit 18404756765c713a0be4eb1082920c04822ce588 ("genirq: Expose default irq affinity mask (take 3)") to be all CPUs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:13:50 UTC
f9226d5 Mark Nelson 27 October 2008, 20:38:08 UTC powerpc: Update remaining dma_mapping_ops to use map/unmap_page After the merge of the 32 and 64bit DMA code, dma_direct_ops lost their map/unmap_single() functions but gained map/unmap_page(). This caused a problem for Cell because Cell's dma_iommu_fixed_ops called the dma_direct_ops if the fixed linear mapping was to be used or the iommu ops if the dynamic window was to be used. So in order to fix this problem we need to update the 64bit DMA code to use map/unmap_page. First, we update the generic IOMMU code so that iommu_map_single() becomes iommu_map_page() and iommu_unmap_single() becomes iommu_unmap_page(). Then we propagate these changes up through all the callers of these two functions and in the process update all the dma_mapping_ops so that they have map/unmap_page rahter than map/unmap_single. We can do this because on 64bit there is no HIGHMEM memory so map/unmap_page ends up performing exactly the same function as map/unmap_single, just taking different arguments. This has no affect on drivers because the dma_map_single_attrs() just ends up calling the map_page() function of the appropriate dma_mapping_ops and similarly the dma_unmap_single_attrs() calls unmap_page(). This fixes an oops on Cell blades, which oops on boot without this because they call dma_direct_ops.map_single, which is NULL. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:13:48 UTC
b30115e Benjamin Herrenschmidt 27 October 2008, 19:48:47 UTC powerpc/pci: Fix unmapping of IO space on 64-bit A typo/thinko made us pass the wrong argument to __flush_hash_table_range when unplugging bridges, thus not flushing all the translations for the IO space on unplug. The third parameter to __flush_hash_table_range is `end', not `size'. This causes the hypervisor to refuse unplugging slots. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:13:46 UTC
e90a131 Nathan Fontenot 27 October 2008, 19:48:17 UTC powerpc/pci: Properly allocate bus resources for hotplug PHBs Resources for PHB's that are dynamically added to a system are not properly allocated in the resource tree. Not having these resources allocated causes an oops when removing the PHB when we try to release them. The diff appears a bit messy, this is mainly due to moving everything one tab to the left in the pcibios_allocate_bus_resources routine. The functionality change in this routine is only that the list_for_each_entry() loop is pulled out and moved to the necessary calling routine. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:12:03 UTC
6098e2e Jeremy Kerr 26 October 2008, 21:51:25 UTC OF-device: Don't overwrite numa_node in device registration Currently, the numa_node of OF-devices will be overwritten during device_register, which simply sets the node to -1. On cell machines, this means that devices can't find their IOMMU, which is referenced through the device's numa node. Set the numa node for OF devices with no parent, and use the lower-level device_initialize and device_add functions, so that the node is preserved. We can remove the call to set_dev_node in of_device_alloc, as it will be overwritten during register. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:12:01 UTC
16c29d1 Michael Neuling 23 October 2008, 00:42:36 UTC powerpc: Fix swapcontext system for VSX + old ucontext size Since VSX support was added, we now have two sizes of ucontext_t; the older, smaller size without the extra VSX state, and the new larger size with the extra VSX state. A program using the sys_swapcontext system call and supplying smaller ucontext_t structures will currently get an EINVAL error if the task has used VSX (e.g. because of calling library code that uses VSX) and the old_ctx argument is non-NULL (i.e. the program is asking for its current context to be saved). Thus the program will start getting EINVAL errors on calls that previously worked. This commit changes this behaviour so that we don't send an EINVAL in this case. It will now return the smaller context but the VSX MSR bit will always be cleared to indicate that the ucontext_t doesn't include the extra VSX state, even if the task has executed VSX instructions. Both 32 and 64 bit cases are updated. [paulus@samba.org - also fix some access_ok() and get_user() calls] Thanks to Ben Herrenschmidt for noticing this problem. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:12:00 UTC
b160544 Michael Neuling 22 October 2008, 19:39:49 UTC powerpc: Fix compiler warning for the relocatable kernel Fixes this warning: arch/powerpc/kernel/setup_64.c:447:5: warning: "kernstart_addr" is not defined which arises because PHYSICAL_START is no longer a constant when CONFIG_RELOCATABLE=y. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:11:54 UTC
2a4b9c5 Paul Mackerras 22 October 2008, 18:43:45 UTC powerpc: Work around ld bug in older binutils Commit 549e8152de8039506f69c677a4546e5427aa6ae7 ("powerpc: Make the 64-bit kernel as a position-independent executable") added lines to vmlinux.lds.S to add the extra sections needed to implement a relocatable kernel. However, those lines seem to trigger a bug in older versions of GNU ld (such as 2.16.1) when building a non-relocatable kernel. Since ld 2.16.1 is still a popular choice for cross-toolchains, this adds an #ifdef to vmlinux.lds.S so the added lines are only included when building a relocatable kernel. Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:11:52 UTC
8b8b0cc Milton Miller 23 October 2008, 18:41:09 UTC powerpc/ppc64/kdump: Better flag for running relocatable The __kdump_flag ABI is overly constraining for future development. As of 2.6.27, the kernel entry point has 4 constraints: Offset 0 is the starting point for the master (boot) cpu (entered with r3 pointing to the device tree structure), offset 0x60 is code for the slave cpus (entered with r3 set to their device tree physical id), offset 0x20 is used by the iseries hypervisor, and secondary cpus must be well behaved when the first 256 bytes are copied to address 0. Placing the __kdump_flag at 0x18 is bad because: - It was taking the last 8 bytes before the iseries hypervisor data. - It was 8 bytes for a boolean flag - It had no way of identifying that the flag was present - It does leave any room for the master to add any additional code before branching, which hurts debug. - It will be unnecessarily hard for 32 bit code to be common (8 bytes) Now that we have eliminated the use of __kdump_flag in favor of the standard is_kdump_kernel(), this flag only controls run without relocating the kernel to PHYSICAL_START (0), so rename it __run_at_load. Move the flag to 0x5c, 1 word before the secondary cpu entry point at 0x60. Initialize it with "run0" to say it will run at 0 unless it is set to 1. It only exists if we are relocatable. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:11:49 UTC
62a8bd6 Milton Miller 22 October 2008, 20:39:04 UTC powerpc: Use is_kdump_kernel() linux/crash_dump.h defines is_kdump_kernel() to be used by code that needs to know if the previous kernel crashed instead of a (clean) boot or reboot. This updates the just added powerpc code to use it. This is needed for the next commit, which will remove __kdump_flag. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:11:47 UTC
1767c8f Milton Miller 22 October 2008, 10:39:18 UTC powerpc: Kexec exit should not use magic numbers Commit 54622f10a6aabb8bb2bdacf3dd070046f03dc246 ("powerpc: Support for relocatable kdump kernel") added a magic flag value in a register to tell purgatory that it should be a panic kernel. This part is wrong and is reverted by this commit. The kernel gets a list of memory blocks and a entry point from user space. Its job is to copy the blocks into place and then branch to the designated entry point (after turning "off" the mmu). The user space tool inserts a trampoline, called purgatory, that runs before the user supplied code. Its job is to establish the entry environment for the new kernel or other application based on the contents of memory. The purgatory code is compiled and embedded in the tool, where it is later patched using the elf symbol table using elf symbols. Since the tool knows it is creating a purgatory that will run after a kernel crash, it should just patch purgatory (or the kernel directly) if something needs to happen. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 October 2008, 05:11:44 UTC
8694a1c Paul Mackerras 31 October 2008, 05:08:14 UTC Merge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 31 October 2008, 05:08:14 UTC
bdb59f9 Trent Piepho 31 October 2008, 01:17:07 UTC gianfar: Don't reset TBI<->SerDes link if it's already up The link may be up already via the chip's reset strapping, or though action of U-Boot, or from the last time the interface was brought up. Resetting the link causes it to go down for several seconds. This can significantly increase the time from power-on to DHCP completion and a device being accessible to the network. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:59:53 UTC
c132419 Trent Piepho 31 October 2008, 01:17:06 UTC gianfar: Fix race in TBI/SerDes configuration The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:59:46 UTC
71527ef David Brownell 27 October 2008, 21:11:34 UTC at91_ether: request/free GPIO for PHY interrupt When the at91_ether driver is using a GPIO for its PHY interrupt, be sure to request (and later, if needed, free) that GPIO. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:47:56 UTC
e83603f Chunbo Luo 28 October 2008, 01:51:46 UTC amd8111e: fix dma_free_coherent context Acoording commit aa24886e379d2b641c5117e178b15ce1d5d366ba, dma_free_coherent() need irqs enabled. This patch fix following warning messages: WARNING: at linux/arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0xaa/0xb0() Call Trace: [<ffffffff8023f80f>] warn_on_slowpath+0x5f/0x90 [<ffffffff80496ffa>] ? __kfree_skb+0x3a/0xa0 [<ffffffff802a4723>] ? discard_slab+0x23/0x40 [<ffffffff8021274a>] dma_free_coherent+0xaa/0xb0 [<ffffffff8043668f>] amd8111e_close+0x10f/0x1b0 [<ffffffff8049f3ae>] dev_close+0x5e/0xb0 [<ffffffff8049efa1>] dev_change_flags+0xa1/0x1e0 [<ffffffff806b2171>] ic_close_devs+0x36/0x4e [<ffffffff806b29ee>] ip_auto_config+0x581/0x10f3 [<ffffffff803a6e19>] ? kobject_add+0x69/0x90 [<ffffffff803a698a>] ? kobject_get+0x1a/0x30 [<ffffffff803a785b>] ? kobject_uevent+0xb/0x10 [<ffffffff803a6c62>] ? kset_register+0x52/0x60 [<ffffffff803a6f9b>] ? kset_create_and_add+0x6b/0xa0 [<ffffffff804e2e74>] ? tcp_ca_find+0x24/0x50 [<ffffffff806b246d>] ? ip_auto_config+0x0/0x10f3 [<ffffffff8020903c>] _stext+0x3c/0x150 [<ffffffff802772d3>] ? register_irq_proc+0xd3/0xf0 [<ffffffff802f0000>] ? mb_cache_create+0x80/0x1f0 [<ffffffff80688693>] kernel_init+0x141/0x1b8 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8 [<ffffffff8020d609>] child_rip+0xa/0x11 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8 [<ffffffff8020d5ff>] ? child_rip+0x0/0x11 Signed-off-by: Chunbo Luo <chunbo.luo@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:47:43 UTC
dc5596d Jay Cliburn 29 October 2008, 16:01:36 UTC atl1: fix vlan tag regression Commit 401c0aabec4b97320f962a0161a846d230a6f7aa introduced a regression in the atl1 driver by storing the VLAN tag in the wrong TX descriptor field. This patch causes the VLAN tag to be stored in its proper location. Tested-by: Ramon Casellas <ramon.casellas@cttc.es> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:46:34 UTC
51ac3be Mike Frysinger 29 October 2008, 13:56:06 UTC SMC91x: delete unused local variable "lp" Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:46:20 UTC
6824a10 Brice Goglin 30 October 2008, 07:59:33 UTC myri10ge: fix stop/go mmio ordering Use mmiowb() to ensure "stop" and "go" commands are sent in order on ia64. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:46:15 UTC
ce39a80 Andy Gospodarek 31 October 2008, 00:41:16 UTC bonding: fix panic when taking bond interface down before removing module A panic was discovered with bonding when using mode 5 or 6 and trying to remove the slaves from the bond after the interface was taken down. When calling 'ifconfig bond0 down' the following happens: bond_close() bond_alb_deinitialize() tlb_deinitialize() kfree(bond_info->tx_hashtbl) bond_info->tx_hashtbl = NULL Unfortunately if there are still slaves in the bond, when removing the module the following happens: bonding_exit() bond_free_all() bond_release_all() bond_alb_deinit_slave() tlb_clear_slave() tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl u32 next_index = tx_hash_table[index].next As you might guess we panic when trying to access a few entries into the table that no longer exists. I experimented with several options (like moving the calls to tlb_deinitialize somewhere else), but it really makes the most sense to be part of the bond_close routine. It also didn't seem logical move tlb_clear_slave around too much, so the simplest option seems to add a check in tlb_clear_slave to make sure we haven't already wiped the tx_hashtbl away before searching for all the non-existent hash-table entries that used to point to the slave as the output interface. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 October 2008, 04:46:12 UTC
back to top