https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
8e0ee43 Linux 2.6.29 23 March 2009, 23:12:14 UTC
0030864 Build with -fno-dwarf2-cfi-asm With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 March 2009, 21:21:26 UTC
1db4b2d trivial: fix orphan dates in ext2 documentation Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by: Jody McIntyre <scjody@sun.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 March 2009, 21:21:26 UTC
d56ffd3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ... 23 March 2009, 16:25:58 UTC
12a37b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened. 23 March 2009, 16:25:24 UTC
53da1d9 fix ptrace slowness This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 March 2009, 16:22:31 UTC
b0dcb4a Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines 23 March 2009, 15:03:09 UTC
345953c powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93c3f14691c8a29e53eb04dc734b27f0db) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 23 March 2009, 13:38:26 UTC
61fa9dc ucc_geth: Fix oops when using fixed-link support commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net> 23 March 2009, 04:30:52 UTC
e3162d3 dm9000: locking bugfix This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net> 23 March 2009, 04:28:39 UTC
6580f57 net: update dnet.c for bus_id removal Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 23 March 2009, 04:22:48 UTC
59fcbdd Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig: improve seed in randconfig kconfig: fix randconfig for choice blocks 22 March 2009, 18:41:02 UTC
39678e5 Merge branch 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge the non-MMU and MMU versions of siginfo.h m68k: use the MMU version of unistd.h for all m68k platforms m68k: merge the non-MMU and MMU versions of signal.h m68k: merge the non-MMU and MMU versions of ptrace.h m68k: use MMU version of setup.h for both MMU and non-MMU m68k: merge the non-MMU and MMU versions of sigcontext.h m68k: merge the non-MMU and MMU versions of swab.h m68k: merge the non-MMU and MMU versions of param.h 22 March 2009, 18:38:57 UTC
f762dd6 Update my email address Update all previous incarnations of my email address to the correct one. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2009, 18:28:37 UTC
2aac0cf eCryptfs: NULL crypt_stat dereference during lookup If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being specified as mount options, a NULL pointer dereference of crypt_stat was possible during lookup. This patch moves the crypt_stat assignment into ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat will not be NULL before we attempt to dereference it. Thanks to Dan Carpenter and his static analysis tool, smatch, for finding this bug. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: Dustin Kirkland <kirkland@canonical.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2009, 18:20:43 UTC
8faece5 eCryptfs: Allocate a variable number of pages for file headers When allocating the memory used to store the eCryptfs header contents, a single, zeroed page was being allocated with get_zeroed_page(). However, the size of an eCryptfs header is either PAGE_CACHE_SIZE or ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE (8192), whichever is larger, and is stored in the file's private_data->crypt_stat->num_header_bytes_at_front field. ecryptfs_write_metadata_to_contents() was using num_header_bytes_at_front to decide how many bytes should be written to the lower filesystem for the file header. Unfortunately, at least 8K was being written from the page, despite the chance of the single, zeroed page being smaller than 8K. This resulted in random areas of kernel memory being written between the 0x1000 and 0x1FFF bytes offsets in the eCryptfs file headers if PAGE_SIZE was 4K. This patch allocates a variable number of pages, calculated with num_header_bytes_at_front, and passes the number of allocated pages along to ecryptfs_write_metadata_to_contents(). Thanks to Florian Streibelt for reporting the data leak and working with me to find the problem. 2.6.28 is the only kernel release with this vulnerability. Corresponds to CVE-2009-0787 Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: Dustin Kirkland <kirkland@canonical.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.sg> Cc: Greg KH <greg@kroah.com> Cc: dann frazier <dannf@dannf.org> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Florian Streibelt <florian@f-streibelt.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2009, 18:20:43 UTC
18a0d89 radeonfb: Whack the PCI PM register until it sticks This fixes a regression introduced when we switched to using the core pci_set_power_state(). The chip seems to need the state to be written over and over again until it sticks, so we do that. Note that the code is a bit blunt, without timeout, etc... but that's pretty much because I put back in there the code exactly as it used to be before the regression. I still add a call to pci_set_power_state() at the end so that ACPI gets called appropriately on x86. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Raymond Wooninck <tittiatcoke@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2009, 18:08:53 UTC
4b97926 dnet: DNET should depend on HAS_IOMEM Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2009, 23:58:47 UTC
e2fc4d1 dca: add missing copyright/license headers In two dca files copyright and license headers are missing. This patch adds them there. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2009, 20:31:23 UTC
c2f3252 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 20 March 2009, 21:53:36 UTC
f3f9258 nl80211: Check that function pointer != NULL before using it NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS handlers did not verify whether a function pointer is NULL (not supported by the driver) before trying to call the function. The former nl80211 command is available for unprivileged users, too, so this can potentially allow normal users to kill networking (or worse..) if mac80211 is built without CONFIG_MAC80211_MESH=y. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 20 March 2009, 20:01:57 UTC
5ed0102 sungem: missing net_device_ops Sungem driver only got partially converted to net_device_ops. Since this could cause bugs, please push this to 2.6.29 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2009, 06:58:01 UTC
1ab1ab7 be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2009, 06:56:46 UTC
ea1dae1 be2net: replenish when posting to rx-queue is starved in out of mem conditions This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2009, 06:56:20 UTC
65c2449 aio: lookup_ioctx can return the wrong value when looking up a bogus context The libaio test harness turned up a problem whereby lookup_ioctx on a bogus io context was returning the 1 valid io context from the list (harness/cases/3.p). Because of that, an extra put_iocontext was done, and when the process exited, it hit a BUG_ON in the put_iocontext macro called from exit_aio (since we expect a users count of 1 and instead get 0). The problem was introduced by "aio: make the lookup_ioctx() lockless" (commit abf137dd7712132ee56d5b3143c2ff61a72a5faa). Thanks to Zach for pointing out that hlist_for_each_entry_rcu will not return with a NULL tpos at the end of the loop, even if the entry was not found. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Zach Brown <zach.brown@oracle.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2009, 22:57:18 UTC
87c3a86 eventfd: remove fput() call from possible IRQ context Remove a source of fput() call from inside IRQ context. Myself, like Eric, wasn't able to reproduce an fput() call from IRQ context, but Jeff said he was able to, with the attached test program. Independently from this, the bug is conceptually there, so we might be better off fixing it. This patch adds an optimization similar to the one we already do on ->ki_filp, on ->ki_eventfd. Playing with ->f_count directly is not pretty in general, but the alternative here would be to add a brand new delayed fput() infrastructure, that I'm not sure is worth it. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2009, 22:57:18 UTC
d011555 Move cc-option to below arch-specific setup Sam Ravnborg says: "We have several architectures that plays strange games with $(CC) and $(CROSS_COMPILE). So we need to postpone any use of $(call cc-option..) until we have included the arch specific Makefile so we try with the correct $(CC) version." Requested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2009, 22:53:19 UTC
caa81d6 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] make page table upgrade work again [S390] make page table walking more robust [S390] Dont check for pfn_valid() in uaccess_pt.c [S390] ftrace/mcount: fix kernel stack backchain [S390] topology: define SD_MC_INIT to fix performance regression [S390] __div64_31 broken for CONFIG_MARCH_G5 19 March 2009, 21:56:35 UTC
2d8620c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix waitqueue usage in hiddev HID: fix incorrect free in hiddev 19 March 2009, 21:50:15 UTC
fe2fd6c Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: Clear space_info full when adding new devices Btrfs: Fix locking around adding new space_info 19 March 2009, 21:49:55 UTC
a8e7d49 Fix race in create_empty_buffers() vs __set_page_dirty_buffers() Nick Piggin noticed this (very unlikely) race between setting a page dirty and creating the buffers for it - we need to hold the mapping private_lock until we've set the page dirty bit in order to make sure that create_empty_buffers() might not build up a set of buffers without the dirty bits set when the page is dirty. I doubt anybody has ever hit this race (and it didn't solve the issue Nick was looking at), but as Nick says: "Still, it does appear to solve a real race, which we should close." Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2009, 18:32:05 UTC
68df375 Add '-fwrapv' to gcc CFLAGS This makes sure that gcc doesn't try to optimize away wrapping arithmetic, which the kernel occasionally uses for overflow testing, ie things like if (ptr + offset < ptr) which technically is undefined for non-unsigned types. See http://bugzilla.kernel.org/show_bug.cgi?id=12597 for details. Not all versions of gcc support it, so we need to make it conditional (it looks like it was introduced in gcc-3.4). Reminded-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2009, 18:10:17 UTC
0702b30 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 19 March 2009, 06:53:57 UTC
192d7a4 sparc64: Fix crash with /proc/iomem When you compile kernel on Sparc64 with heap memory checking and type "cat /proc/iomem", you get a crash, because pointers in struct resource are uninitialized. Most code fills struct resource with zeros, so I assume that it is responsibility of the caller of request_resource to initialized it, not the responsibility of request_resource functuion. After 2.6.29 is out, there could be a check for uninitialized fields added to request_resource to avoid crashes like this. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:53:16 UTC
42cc77c sparc64: Reschedule KGDB capture to a software interrupt. Otherwise it might interrupt switch_to() midstream and use half-cooked register window state. Reported-by: Chris Torek <chris.torek@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:51:57 UTC
170ebf8 bas_gigaset: correctly allocate USB interrupt transfer buffer Every USB transfer buffer has to be allocated individually by kmalloc. Impact: bugfix, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Tested-by: Kolja Waschk <kawk@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:44:23 UTC
44c1d6f smsc911x: reset last known duplex and carrier on open smsc911x_phy_adjust_link is called periodically by the phy layer (as it's run in polling mode), and it only updates the hardware when it sees a change in duplex or carrier. This patch clears the last known values every time the interface is brought up, instead of only when the module is loaded. Without this patch the adjust_link function never updates the hardware after an ifconfig down; ifconfig up. On a full duplex link this causes the tx error counter to increment, even though packets are correctly transmitted, as the default MAC_CR register setting is for half duplex. The tx errors are "no carrier" errors, which should be ignored in full-duplex mode. When MAC_CR is set to "full duplex" mode they are correctly ignored by the hardware. Note that even with this patch the tx error counter can increment if packets are transmitted between "ifconfig up" and the first phy poll interval. An improved solution would use the phy interrupt with phylib, but I haven't managed to make this work 100% robustly yet. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:37:18 UTC
2e2a6a9 sh_eth: Fix mistake of the address of SH7763 Address of SH_TSU_ADDR and ARSTR of SH7763 was wrong. This revise it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:31:50 UTC
0e0fde3 sh_eth: Change handling of IRQ Handling of IRQ of the SH7763/SH7764 CPU which sh_eth supported was changed. This revises it for this change. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:31:49 UTC
2bad35b netns: oops in ip[6]_frag_reasm incrementing stats dev can be NULL in ip[6]_frag_reasm for skb's coming from RAW sockets. Quagga's OSPFD sends fragmented packets on a RAW socket, when netfilter conntrack reassembles them on the OUTPUT path you hit this code path. You can test it with something like "hping2 -0 -d 2000 -f AA.BB.CC.DD" With help from Jarek Poplawski. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:26:11 UTC
e4a389a net: kfree(napi->skb) => kfree_skb struct sk_buff pointers should be freed with kfree_skb. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 06:12:13 UTC
cb0dc77 net: fix sctp breakage broken by commit 5e739d1752aca4e8f3e794d431503bfca3162df4; AFAICS should be -stable fodder as well... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Aced-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 02:12:42 UTC
1b1d8f7 ipv6: fix display of local and remote sit endpoints This fixes the regressions cause by commit 1326c3d5a4b792a2b15877feb7fb691f8945d203 (v2.6.28-rc6-461-g23a12b1) broke the display of local and remote addresses of an SIT tunnel in iproute2. nt->parms is used by ipip6_tunnel_init() and therefore need to be initialized first. Tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12868 Reported-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 01:56:54 UTC
e9c6a58 net: Document /proc/sys/net/core/netdev_budget The NAPI poll parameter netdev_budget is not documented in kernel-docs. Since it may have a substantial effect on at least some network loads, it should be. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 01:51:06 UTC
6914563 tulip: fix crash on iface up with shirq debug Tulip is currently doing request_irq before it has done its initialization. This is usually not a problem because it hasn't enable interrupts yet, but with DEBUG_SHIRQ on, we call the irq handler when registering the interrupt as a sanity check. This can result in a NULL ptr dereference, so call tulip_init_ring before request_irq, and add a free_ring function to do the freeing now shared with tulip_close. Tested with a shell loop running ifup, ifdown in a loop a few hundred times with DEBUG_SHIRQ on. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 01:49:01 UTC
4783256 virtio_net: Make virtio_net support carrier detection Impact: Make NetworkManager work with virtio_net For now the semantics are simple: There is always carrier. This allows a seamless experience with e.g., qemu/kvm where NetworkManager just configures and sets up everything automagically. If/when a generally agreed-upon way to control carrier on/off in the emulator/hypervisor level emerges, it will be trivial to extend the driver to support that too, but for now even this 2-liner makes user experience that much better. Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 01:40:02 UTC
17d0450 bonding: Fix updating of speed/duplex changes This patch corrects an omission from the following commit: commit f0c76d61779b153dbfb955db3f144c62d02173c2 Author: Jay Vosburgh <fubar@us.ibm.com> Date: Wed Jul 2 18:21:58 2008 -0700 bonding: refactor mii monitor The un-refactored code checked the link speed and duplex of every slave on every pass; the refactored code did not do so. The 802.3ad and balance-alb/tlb modes utilize the speed and duplex information, and require it to be kept up to date. This patch adds a notifier check to perform the appropriate updating when the slave device speed changes. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 01:38:25 UTC
6901031 bnx2: Fix problem of using wrong IRQ handler. The MSI-X handler was chosen before the call to pci_enable_msix(). If MSI-X was not available, the wrong MSI-X handler would be used in INTA mode. This would cause a screaming interrupt problem because INTA would not be cleared by the MSI-X handler. Fixed by assigning MSI-X handler after pci_enable_msix() returns successfully. Also update version to 1.9.3. Thomas Chenault <thomas_chenault@dell.com> helped us find this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2009, 01:11:51 UTC
a1e4ee2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: benet: remove driver now that it is merged in drivers/net/ 18 March 2009, 16:34:17 UTC
85bff88 Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linux * 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: nfsd: nfsd should drop CAP_MKNOD for non-root NFSD: provide encode routine for OP_OPENATTR 18 March 2009, 16:27:20 UTC
d0573fa Staging: benet: remove driver now that it is merged in drivers/net/ The benet driver is now in the proper place in drivers/net/benet, so we can remove the staging version. Acked-by: Sathya Perla <sathyap@serverengines.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 18 March 2009, 16:22:17 UTC
d941d0e Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: ps3_defconfig updates powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx ps3/block: Replace mtd/ps3vram by block/ps3vram 18 March 2009, 16:05:40 UTC
8144737 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix refptr allocation and release order 18 March 2009, 16:04:25 UTC
99dbe10 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: storage: Unusual USB device Prolific 2507 variation added USB: Add device id for Option GTM380 to option driver USB: Add Vendor/Product ID for new CDMA U727 to option driver USB: Updated unusual-devs entry for USB mass storage on Nokia 6233 USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530 USB: EHCI: expedite unlinks when the root hub is suspended USB: EHCI: Fix isochronous URB leak USB: option.c: add ZTE 622 modem device USB: wusbcore/wa-xfer, fix lock imbalance USB: misc/vstusb, fix lock imbalance USB: misc/adutux, fix lock imbalance USB: image/mdc800, fix lock imbalance USB: atm/cxacru, fix lock imbalance USB: unusual_devs: Add support for GI 0431 SD-Card interface USB: serial: new cp2101 device id USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 USB: serial: add FTDI USB/Serial converter devices USB: usbfs: keep async URBs until the device file is closed USB: usbtmc: add protocol 1 support USB: usbtmc: fix stupid bug in open() 18 March 2009, 16:03:18 UTC
bd27e6d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix vunmap and free order in snd_free_sgbuf_pages() ALSA: mixart, fix lock imbalance ALSA: pcm_oss, fix locking typo ALSA: oss-mixer - Fixes recording gain control ALSA: hda - Workaround for buggy DMA position on ATI controllers ALSA: hda - Fix DMA mask for ATI controllers ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2 18 March 2009, 14:39:11 UTC
0fb1d9b [S390] make page table upgrade work again After TASK_SIZE now gives the current size of the address space the upgrade of a 64 bit process from 3 to 4 levels of page table needs to use the arch_mmap_check hook to catch large mmap lengths. The get_unmapped_area* functions need to check for -ENOMEM from the arch_get_unmapped_area*, upgrade the page table and retry. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 18 March 2009, 12:28:13 UTC
f481bfa [S390] make page table walking more robust Make page table walking on s390 more robust. The current code requires that the pgd/pud/pmd/pte loop is only done for address ranges that are below the end address of the last vma of the address space. But this is not always true, e.g. the generic page table walker does not guarantee this. Change TASK_SIZE/TASK_SIZE_OF to reflect the current size of the address space. This makes the generic page table walker happy but it breaks the upgrade of a 3 level page table to a 4 level page table. To make the upgrade work again another fix is required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 18 March 2009, 12:28:13 UTC
2887fc5 [S390] Dont check for pfn_valid() in uaccess_pt.c pfn_valid() actually checks for a valid struct page and not for a valid pfn. Using xip mappings w/o struct pages, this will result in -EFAULT returned by the (page table walk) user copy functions, even though there is valid memory. Those user copy functions don't need a struct page, so this patch just removes the pfn_valid() check. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 18 March 2009, 12:28:13 UTC
cf08734 [S390] ftrace/mcount: fix kernel stack backchain With packed stack the backchain is at a different location. Just use __SF_BACKCHAIN as an offset to store the backchain. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 18 March 2009, 12:28:12 UTC
f55d638 [S390] topology: define SD_MC_INIT to fix performance regression The default values for SD_MC_INIT cause an additional cpu usage of up to 40% on some network benchmarks compared to the plain SD_CPU_INIT values. So just define SD_MC_INIT to SD_CPU_INIT. More tuning needs to be done. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 18 March 2009, 12:28:12 UTC
4fa81ed [S390] __div64_31 broken for CONFIG_MARCH_G5 The implementation of __div64_31 for G5 machines is broken. The comments in __div64_31 are correct, only the code does not do what the comments say. The part "If the remainder has overflown subtract base and increase the quotient" is only partially realized, the base is subtracted correctly but the quotient is only increased if the dividend had the last bit set. Using the correct instruction fixes the problem. Cc: stable@kernel.org Reported-by: Frans Pop <elendil@planet.nl> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 18 March 2009, 12:28:12 UTC
f1aa298 Merge branch 'fix/opl3sa2-suspend' into for-linus 18 March 2009, 07:04:36 UTC
a232ee6 Merge branch 'fix/hda' into for-linus 18 March 2009, 07:04:16 UTC
6af845e ALSA: Fix vunmap and free order in snd_free_sgbuf_pages() In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG pages, and it causes errors on Xen as Xen manages the pages differently. Although no significant errors have been reported on the actual hardware, this order should be fixed other way round, first vunmap() then free pages. Cc: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2009, 07:04:01 UTC
82f5d57 ALSA: mixart, fix lock imbalance There is an omitted unlock in one snd_mixart_hw_params fail path. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2009, 07:03:49 UTC
9105459 ALSA: pcm_oss, fix locking typo s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write. Probably a typo, lock should be unlocked when leaving the function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2009, 07:03:33 UTC
36c7b83 ALSA: oss-mixer - Fixes recording gain control At the time of initialization, SNDRV_MIXER_OSS_PRESENT_PVOLUME bit is not set for MIC (slot 7). So, the same should not be checked when an application tries to do gain control for audio recording devices. Just check slot->present for SNDRV_MIXER_OSS_PRESENT_CVOLUME independently. Verified with a simple application which opens /dev/dsp for recording and /dev/mixer for volume control. Have tested two usb audio mic devices. Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2009, 06:52:28 UTC
c673ba1 ALSA: hda - Workaround for buggy DMA position on ATI controllers The position-buffer on ATI controllers are unreliable as well as on VIA chips, thus the same workaround for DMA position reading as VIA is useful for ATI. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2009, 06:46:21 UTC
09240cf ALSA: hda - Fix DMA mask for ATI controllers ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2009, 06:45:41 UTC
58cefd2 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bb_prealloc_list corruption due to wrong group locking ext4: fix bogus BUG_ONs in in mballoc code ext4: Print the find_group_flex() warning only once ext4: fix header check in ext4_ext_search_right() for deep extent trees. 18 March 2009, 03:55:40 UTC
9aac397 powerpc/ps3: ps3_defconfig updates Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 March 2009, 02:44:16 UTC
c71327a Merge commit 'gcl/merge' into merge 18 March 2009, 02:16:30 UTC
6e2b757 module: fix refptr allocation and release order Impact: fix ref-after-free crash on failed module load Fix refptr bug: Change refptr allocation and release order not to access a module data structure pointed by 'mod' after freeing mod->module_core. This bug will cause kernel panic(e.g. failed to find undefined symbols). This bug was reported on systemtap bugzilla. http://sources.redhat.com/bugzilla/show_bug.cgi?id=9927 Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 17 March 2009, 23:01:21 UTC
f10023a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 17 March 2009, 21:29:22 UTC
8a0845c USB: storage: Unusual USB device Prolific 2507 variation added The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
e7f2f0d USB: Add device id for Option GTM380 to option driver Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
56a2182 USB: Add Vendor/Product ID for new CDMA U727 to option driver * newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
716a9c8 USB: Updated unusual-devs entry for USB mass storage on Nokia 6233 Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> 17 March 2009, 21:01:29 UTC
0cc6bfe USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530 The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
391016f USB: EHCI: expedite unlinks when the root hub is suspended This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
508db8c USB: EHCI: Fix isochronous URB leak ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
9ea19b8 USB: option.c: add ZTE 622 modem device Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
49fa092 USB: wusbcore/wa-xfer, fix lock imbalance Fix locking on one wa_urb_enqueue_b's fail path. There was omitted unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
a08b43a USB: misc/vstusb, fix lock imbalance Make sure we don't leak locked vstdev->lock in vstusb_write. Unlock properly on one fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
46c9844 USB: misc/adutux, fix lock imbalance Don't unlock adutux_mutex when not held. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:29 UTC
909b6c3 USB: image/mdc800, fix lock imbalance There is an omitted unlock in mdc800_usb_probe's fail path. Add it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Henning Zabel <henning@uni-paderborn.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
eeafa64 USB: atm/cxacru, fix lock imbalance We do not hold mutex in one place in cxacru_cm, but unlock it on fail path. Fix this. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Simon Arlott <cxacru@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
c497e71 USB: unusual_devs: Add support for GI 0431 SD-Card interface Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
c653566 USB: serial: new cp2101 device id From: Robert M. Kenney <rmk@unh.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
b0d6590 USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
7f82b6d USB: serial: add FTDI USB/Serial converter devices Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
6ff1046 USB: usbfs: keep async URBs until the device file is closed The usbfs driver manages a list of completed asynchronous URBs. But it is too eager to free the entries on this list: destroy_async() gets called whenever an interface is unbound or a device is removed, and it deallocates the outstanding struct async entries for all URBs on that interface or device. This is wrong; the user program should be able to reap an URB any time after it has completed, regardless of whether or not the interface is still bound or the device is still present. This patch (as1222) moves the code for deallocating the completed list entries from destroy_async() to usbdev_release(). The outstanding entries won't be freed until the user program has closed the device file, thereby eliminating any possibility that the remaining URBs might still be reaped. This fixes a bug in which a program can hang in the USBDEVFS_REAPURB ioctl when the device is unplugged. Reported-and-tested-by: Martin Poupe <martin.poupe@upek.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
228dd05 USB: usbtmc: add protocol 1 support The driver already supports the 1 protocol support, so just add it to the MODULE_DEVICE_TABLE entry so it properly picks up these devices. Thanks to Jouni Rynö for pointing this out. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
5b10916 USB: usbtmc: fix stupid bug in open() open() will never succeed, as we always return -ENODEV. Fix this obvious bug. Thanks to Jouni Ryno for reporting it. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 17 March 2009, 21:01:28 UTC
4ada810 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 17 March 2009, 20:12:47 UTC
303c6a0 gro: Fix legacy path napi_complete crash On the legacy netif_rx path, I incorrectly tried to optimise the napi_complete call by using __napi_complete before we reenable IRQs. This simply doesn't work since we need to flush the held GRO packets first. This patch fixes it by doing the obvious thing of reenabling IRQs first and then calling napi_complete. Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2009, 20:11:29 UTC
76a67ec nfsd: nfsd should drop CAP_MKNOD for non-root Since creating a device node is normally an operation requiring special privilege, Igor Zhbanov points out that it is surprising (to say the least) that a client can, for example, create a device node on a filesystem exported with root_squash. So, make sure CAP_MKNOD is among the capabilities dropped when an nfsd thread handles a request from a non-root user. Reported-by: Igor Zhbanov <izh1979@gmail.com> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> 17 March 2009, 18:55:55 UTC
84f09f4 NFSD: provide encode routine for OP_OPENATTR Although this operation is unsupported by our implementation we still need to provide an encode routine for it to merely encode its (error) status back in the compound reply. Thanks for Bill Baker at sun.com for testing with the Sun OpenSolaris' client, finding, and reporting this bug at Connectathon 2009. This bug was introduced in 2.6.27 Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> 17 March 2009, 18:54:45 UTC
ee568b2 Avoid 64-bit "switch()" statements on 32-bit architectures Commit ee6f779b9e0851e2f7da292a9f58e0095edf615a ("filp->f_pos not correctly updated in proc_task_readdir") changed the proc code to use filp->f_pos directly, rather than through a temporary variable. In the process, that caused the operations to be done on the full 64 bits, even though the offset is never that big. That's all fine and dandy per se, but for some unfathomable reason gcc generates absolutely horrid code when using 64-bit values in switch() statements. To the point of actually calling out to gcc helper functions like __cmpdi2 rather than just doing the trivial comparisons directly the way gcc does for normal compares. At which point we get link failures, because we really don't want to support that kind of crazy code. Fix this by just casting the f_pos value to "unsigned long", which is plenty big enough for /proc, and avoids the gcc code generation issue. Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 March 2009, 17:02:35 UTC
3039088 prevent boosting kprobes on exception address Don't boost at the addresses which are listed on exception tables, because major page fault will occur on those addresses. In that case, kprobes can not ensure that when instruction buffer can be freed since some processes will sleep on the buffer. kprobes-ia64 already has same check. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 March 2009, 16:11:48 UTC
back to top