Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
0910697 Linus Torvalds 22 April 2009, 03:07:00 UTC Linux 2.6.30-rc3 22 April 2009, 03:07:00 UTC
d4d5291 Arjan van de Ven 21 April 2009, 20:32:54 UTC driver synchronization: make scsi_wait_scan more advanced There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 April 2009, 02:40:00 UTC
5dd559f Jonathan Corbet 21 April 2009, 22:30:32 UTC Trivial: fix a typo in slow-work.h Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 April 2009, 02:40:00 UTC
5028eaa David Howells 21 April 2009, 22:00:29 UTC PERCPU: Collect the DECLARE/DEFINE declarations together Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 April 2009, 02:40:00 UTC
9b8de74 David Howells 21 April 2009, 22:00:24 UTC FRV: Fix the section attribute on UP DECLARE_PER_CPU() In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 April 2009, 02:39:59 UTC
ccc5ff9 Linus Torvalds 21 April 2009, 21:12:58 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix btrfs fallocate oops and deadlock Btrfs: use the right node in reada_for_balance Btrfs: fix oops on page->mapping->host during writepage Btrfs: add a priority queue to the async thread helpers Btrfs: use WRITE_SYNC for synchronous writes 21 April 2009, 21:12:58 UTC
c19c6c3 Linus Torvalds 21 April 2009, 21:12:43 UTC Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6 * 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: go7007: Convert to the new i2c device binding model 21 April 2009, 21:12:43 UTC
daba028 Roel Kluin 21 April 2009, 19:24:58 UTC bfin_5xx: misplaced parentheses `!' has a higher precedence than `&', parentheses are misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:51 UTC
2e2e425 KOSAKI Motohiro 21 April 2009, 19:24:57 UTC vmscan,memcg: reintroduce sc->may_swap Commit a6dc60f8975ad96d162915e07703a4439c80dcf0 ("vmscan: rename sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used it as a flag for "we need to use swap?", as the name indicate. And in the current implementation, memcg cannot reclaim mapped file caches when mem+swap hits the limit. re-introduce may_swap flag and handle it at get_scan_ratio(). This patch doesn't influence any scan_control users other than memcg. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:51 UTC
55e5750 Dave Jiang 21 April 2009, 19:24:56 UTC edac: ppc mpc85xx fix mc err detect Error found by Jeff Haran. The error detect register is 0s when no errors are detected. The check code is incorrect, so reverse check sense. Reported-by: Jeff Haran <jharan@Brocade.COM> Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:51 UTC
b298cec Eric Paris 21 April 2009, 19:24:54 UTC scsi: mpt: suppress debugobjects warning Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133 ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276() Hardware name: VMware Virtual Platform Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2 Call Trace: [<c042c51c>] warn_slowpath+0x74/0x8a [<c0469600>] ? start_critical_timing+0x96/0xb7 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c0446fad>] ? trace_hardirqs_off_caller+0x18/0xaf [<c044704f>] ? trace_hardirqs_off+0xb/0xd [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c042cb84>] ? release_console_sem+0x1a5/0x1ad [<c05013e6>] __debug_object_init+0x1f3/0x276 [<c0501494>] debug_object_init+0x13/0x17 [<c0433c56>] init_timer+0x10/0x1a [<e08e5b54>] mpt_config+0x1c1/0x2b7 [mptbase] [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase] [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase] [<e08e6fa2>] mpt_do_ioc_recovery+0x950/0x1212 [mptbase] [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c [<c060c3af>] ? _spin_unlock_irq+0x22/0x26 [<c04f2d8b>] ? string+0x2b/0x76 [<c04f310e>] ? vsnprintf+0x338/0x7b3 [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c044897d>] ? debug_check_no_locks_freed+0xeb/0x105 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c [<c04488bc>] ? debug_check_no_locks_freed+0x2a/0x105 [<c0446b8c>] ? lock_release_holdtime+0x43/0x48 [<c043f742>] ? up_read+0x16/0x29 [<c05076f8>] ? pci_get_slot+0x66/0x72 [<e08e89ca>] mpt_attach+0x881/0x9b1 [mptbase] [<e091c8e5>] mptspi_probe+0x11/0x354 [mptspi] Noticing that every caller of mpt_config has its CONFIGPARMS struct declared on the stack and thus the &pCfg->timer is always on the stack I changed init_timer() to init_timer_on_stack() and it seems to have shut up..... Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: <stable@kernel.org> [2.6.29.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:50 UTC
e873cff Robin Holt 21 April 2009, 19:24:53 UTC sgi-xp/sgi-gru: allow modules to load on non-uv systems For an upcoming distro release, we need to have the xp kernel module loadable even when not on UV equipment. The xpc module will not load. This will allow one set of modules dependent upon xp to work on either UV or non-UV equipment. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:50 UTC
2d7197f WANG Cong 21 April 2009, 19:24:52 UTC uml: kill a kconfig warning Got this warning from Kconfig: boolean symbol INPUT tested for 'm'? test forced to 'n' because INPUT is tristate, not bool. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:50 UTC
77e38a5 David Howells 21 April 2009, 19:24:51 UTC frv: insert PCI root bus resources for the MB93090 devel motherboard Insert PCI root bus resources for the FRV-based MB93090 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:50 UTC
6d029b6 Krzysztof Halasa 21 April 2009, 19:24:49 UTC rtc-cmos: fix printk output With no IRQ available/defined, RTC-CMOS driver prints something like: rtc0: alarms up to one no, y3k, 114 bytes nvram ^^^^ I guess the following is a bit easier to understand: rtc0: no alarms, y3k, 114 bytes nvram Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:50 UTC
6e538aa David Brownell 21 April 2009, 19:24:49 UTC spi: documentation: emphasise spi_master.setup() semantics This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:50 UTC
14fadca Robert P. J. Day 21 April 2009, 19:24:47 UTC MAINTAINERS: add a more searchable string for the H8300 architecture. Add a parenthesized string of "H8300" for more convenient searchability in the MAINTAINERS file. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
0f24922 Matt Mackall 21 April 2009, 19:24:47 UTC MAINTAINERS: add Matt Mackall to embedded maintainers Impact: make more work for myself Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
306c68a Roel Kluin 21 April 2009, 19:24:46 UTC spi: pxa2xx: limit reaches -1 On line 944 the return value of flush() is considered as a boolean, but limit reaches -1 upon timeout which evaluates to true. On 540, 594, 720 the same occurs for wait_ssp_rx_stall() On 536 the same occurs for wait_dma_channel_stop() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
dc8c7f8 Joe Perches 21 April 2009, 19:24:45 UTC MAINTAINERS: update KMEMTRACE pattern after file rename Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
3285821 Joe Perches 21 April 2009, 19:24:44 UTC MAINTAINERS: remove include/asm-*/suspend* file patterns There are no more arches with suspend support using these directories. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
148da33 Daniel Ribeiro 21 April 2009, 19:24:43 UTC pxa2xx_spi: restore DRCMR on resume If DMA is enabled, any spi_sync call after suspend/resume would block forever, because DRCMR is lost on suspend. This patch restores DRCMR to the same values set by probe. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
aa0b8f3 Helge Deller 21 April 2009, 19:24:42 UTC drivers/input/serio/hp_sdc.c: fix crash when removing hp_sdc module On parisc machines, which don't have HIL, removing the hp_sdc module panics the kernel. Fix this by returning early in hp_sdc_exit() if no HP SDC controller was found. Add functionality to probe for the hp_sdc_mlc kernel module (which takes care of the upper layer HIL functionality on parisc) after two seconds. This is needed to get all the other HIL drivers (keyboard / mouse/ ..) drivers automatically loaded by udev later as well. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Frans Pop <elendil@planet.nl> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:49 UTC
e638c13 KAMEZAWA Hiroyuki 21 April 2009, 19:24:41 UTC memcg: use rcu_dereference to access mm->owner mm->owner should be accessed with rcu_dereference(). Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:48 UTC
c12ddba Akinobu Mita 21 April 2009, 19:24:05 UTC hugetlbfs: return negative error code for bad mount option This fixes the following BUG: # mount -o size=MM -t hugetlbfs none /huge hugetlbfs: Bad value 'MM' for mount option 'size=MM' ------------[ cut here ]------------ kernel BUG at fs/super.c:996! Due to BUG_ON(!mnt->mnt_sb); in vfs_kern_mount(). Also, remove unused #include <linux/quotaops.h> Cc: William Irwin <wli@holomorphy.com> Cc: <stable@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:48 UTC
4dec302 dann frazier 21 April 2009, 19:24:05 UTC ipmi: add oem message handling Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:48 UTC
25176ed Corey Minyard 21 April 2009, 19:24:04 UTC ipmi: fix statistics counting issues Bela Lubkin noticed that the statistics for send IPMB and LAN commands in the IPMI driver could be incremented even if an error occurred. Move the increments to the proper place to avoid this. Also add some statistics for retransmissions that failed, and some little helper functions to neaten up the code a little. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Bela Lubkin <blubkin@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:48 UTC
40112ae Corey Minyard 21 April 2009, 19:24:03 UTC ipmi: test for event buffer before using The IPMI driver would attempt to use the event buffer even if that didn't exist on the BMC. This patch modified the IPMI driver to check for the event buffer's existence before trying to use it. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:48 UTC
8b32b5d Corey Minyard 21 April 2009, 19:24:02 UTC ipmi: fix platform return check The wrong return value is being tested when allocating a platform device in the IPMI SI code. Check the right value. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:48 UTC
4614e6a Magnus Damm 21 April 2009, 19:24:02 UTC clocksource: add enable() and disable() callbacks Add enable() and disable() callbacks for clocksources. This allows us to put unused clocksources in power save mode. The functions clocksource_enable() and clocksource_disable() wrap the callbacks and are inserted in the timekeeping code to enable before use and disable after switching to a new clocksource. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:47 UTC
8e19608 Magnus Damm 21 April 2009, 19:24:00 UTC clocksource: pass clocksource to read() callback Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:47 UTC
ff14ed5 Denis V. Lunev 21 April 2009, 19:23:59 UTC pxafb: lcsr1 is unused without CONFIG_FB_PXA_OVERLAY Fixes the warning: drivers/video/pxafb.c: In function 'pxafb_handle_irq': drivers/video/pxafb.c:1442: warning: unused variable 'lcsr1' [akpm@linux-foundation.org: save an ifdef] Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:47 UTC
44aa417 Vlada Peric 21 April 2009, 19:23:59 UTC asiliantfb: add missing return statement Commit 032220ba (asiliantfb: fix cmap memory leaks) changed the function init_asiliant from void to int, resulting in the following compile warning: drivers/video/asiliantfb.c: In function `init_asiliant': drivers/video/asiliantfb.c:536: warning: control reaches end of non-void function Fix the warning by returning 0. Signed-off-by: Vlada Peric <vlada.peric@gmail.com> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 20:41:47 UTC
7400516 Jean Delvare 21 April 2009, 19:47:22 UTC go7007: Convert to the new i2c device binding model Move the go7007 driver away from the legacy i2c binding model, which is going away really soon now. The I2C addresses of the audio and video chips in s2250-board didn't look quite right, apparently they were left-aligned values when Linux wants right-aligned values, so I fixed them too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> 21 April 2009, 19:47:22 UTC
546888d Chris Mason 21 April 2009, 15:53:38 UTC Btrfs: fix btrfs fallocate oops and deadlock Btrfs fallocate was incorrectly starting a transaction with a lock held on the extent_io tree for the file, which could deadlock. Strictly speaking it was using join_transaction which would be safe, but it is better to move the transaction outside of the lock. When preallocated extents are overwritten, btrfs_mark_buffer_dirty was being called on an unlocked buffer. This was triggering an assertion and oops because the lock is supposed to be held. The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had been run. btrfs_del_item takes care of dirtying things, so the solution is a to skip the btrfs_mark_buffer_dirty call in this case. Signed-off-by: Chris Mason <chris.mason@oracle.com> 21 April 2009, 16:45:12 UTC
b33ecba Linus Torvalds 21 April 2009, 15:27:30 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Fix page_mkwrite() return code GFS2: Clear dirty bit at end of inode glock sync 21 April 2009, 15:27:30 UTC
81ca980 Linus Torvalds 21 April 2009, 15:16:14 UTC Merge branch 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix mmap2 for handling differing PAGE_SIZEs. sh: sh7723: Don't default enable the RTC clock. sh: sh7722: Don't default enable the RTC clock. rtc: rtc-sh: clock framework support. 21 April 2009, 15:16:14 UTC
9a41fe3 Linus Torvalds 21 April 2009, 14:56:17 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: reiserfs: fix j_last_flush_trans_id type fs: Mark get_filesystem_list() as __init function. kill vfs_stat_fd / vfs_lstat_fd Separate out common fstatat code into vfs_fstatat ecryptfs: use memdup_user() ncpfs: use memdup_user() xfs: use memdup_user() sysfs: use memdup_user() btrfs: use memdup_user() xattr: use memdup_user() autofs4: use memchr() in invalid_string() Documentation/filesystems: remove out of date reference to BKL being held Fix i_mutex vs. readdir handling in nfsd fs/compat_ioctl: fix build when !BLOCK Fix autofs_expire() No need for crossing to mountpoint in audit_tag_tree() Safer nfsd_cross_mnt() Touch all affected namespaces on propagation of mount Fix AUTOFS_DEV_IOCTL_REQUESTER_CMD 21 April 2009, 14:56:17 UTC
8b9cf76 Thomas Bogendoerfer 21 April 2009, 11:44:13 UTC Fix SYSCALL_ALIAS for older MIPS assembler Older MIPS assembler don't support .set for defining aliases. Using = works for old and new assembers. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 14:50:58 UTC
8340437 Trond Myklebust 20 April 2009, 18:58:35 UTC NFS: Fix the XDR iovec calculation in nfs3_xdr_setaclargs Commit ae46141ff08f1965b17c531b571953c39ce8b9e2 (NFSv3: Fix posix ACL code) introduces a bug in the calculation of the XDR header iovec. In the case where we are inlining the acls, we need to adjust the length of the iovec req->rq_svec, in addition to adjusting the total buffer length. Tested-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Tested-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 April 2009, 14:46:49 UTC
4db25d4 Paul Mundt 21 April 2009, 08:12:16 UTC Merge branch 'sh/stable-updates' into sh/for-2.6.30 21 April 2009, 08:12:16 UTC
be9208d Al Viro 21 April 2009, 03:29:41 UTC reiserfs: fix j_last_flush_trans_id type Conversion in commit 600ed41675d8c384519d8f0b3c76afed39ef2f4b had missed that one, but converted format from %lu to %u. As the result, /proc/..../journal got buggered on 64bit boxen. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:29:41 UTC
38e23c9 Tetsuo Handa 09 April 2009, 11:17:52 UTC fs: Mark get_filesystem_list() as __init function. "int get_filesystem_list(char * buf)" is called by only "static void __init get_fs_names(char *page)". We can mark get_filesystem_list() as "__init". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:52 UTC
2eae7a1 Christoph Hellwig 08 April 2009, 20:34:03 UTC kill vfs_stat_fd / vfs_lstat_fd There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with Oleg's vfs_fstatat. Use vfs_fstatat for the few cases having the directory fd, and switch all others to vfs_stat / vfs_lstat. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:52 UTC
0112fc2 Oleg Drokin 08 April 2009, 16:05:42 UTC Separate out common fstatat code into vfs_fstatat This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:51 UTC
fd56d24 Li Zefan 08 April 2009, 07:09:29 UTC ecryptfs: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:51 UTC
a9482eb Li Zefan 08 April 2009, 07:08:53 UTC ncpfs: use memdup_user() Remove open-coded memdup_user() Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:51 UTC
0e639bd Li Zefan 08 April 2009, 07:08:04 UTC xfs: use memdup_user() Remove open-coded memdup_user() Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:51 UTC
1c8542c Li Zefan 08 April 2009, 07:07:30 UTC sysfs: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:50 UTC
dae7b66 Li Zefan 08 April 2009, 07:06:54 UTC btrfs: use memdup_user() Remove open-coded memdup_user(). Note this changes some GFP_NOFS to GFP_KERNEL, since copy_from_user() may cause pagefault, it's pointless to pass GFP_NOFS to kmalloc(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:50 UTC
3939fcd Li Zefan 08 April 2009, 07:06:12 UTC xattr: use memdup_user() Remove open-coded memdup_user() Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:50 UTC
3eac877 Al Viro 07 April 2009, 15:12:46 UTC autofs4: use memchr() in invalid_string() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:02:50 UTC
66672fe Adrian McMenamin 21 April 2009, 01:38:28 UTC Documentation/filesystems: remove out of date reference to BKL being held Documentation/filesystems/vfs.txt incorrectly states that the kernel is locked during the call to statfs (Documentation/filesystems/Locking correctly says it is not). This patch removes the offending sentence. remove reference to BKL being held in statfs Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:16 UTC
2f9092e David Woodhouse 20 April 2009, 22:18:37 UTC Fix i_mutex vs. readdir handling in nfsd Commit 14f7dd63 ("Copy XFS readdir hack into nfsd code") introduced a bug to generic code which had been extant for a long time in the XFS version -- it started to call through into lookup_one_len() and hence into the file systems' ->lookup() methods without i_mutex held on the directory. This patch fixes it by locking the directory's i_mutex again before calling the filldir functions. The original deadlocks which commit 14f7dd63 was designed to avoid are still avoided, because they were due to fs-internal locking, not i_mutex. While we're at it, fix the return type of nfsd_buffered_readdir() which should be a __be32 not an int -- it's an NFS errno, not a Linux errno. And return nfserrno(-ENOMEM) when allocation fails, not just -ENOMEM. Sparse would have caught that, if it wasn't so busy bitching about __cold__. Commit 05f4f678 ("nfsd4: don't do lookup within readdir in recovery code") introduced a similar problem with calling lookup_one_len() without i_mutex, which this patch also addresses. To fix that, it was necessary to fix the called functions so that they expect i_mutex to be held; that part was done by J. Bruce Fields. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Umm-I-can-live-with-that-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: J. R. Okajima <hooanon05@yahoo.co.jp> Tested-by: J. Bruce Fields <bfields@citi.umich.edu> LKML-Reference: <8036.1237474444@jrobl> Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:16 UTC
1ba0c7d Alexander Beregalov 20 April 2009, 08:23:02 UTC fs/compat_ioctl: fix build when !BLOCK In file included from fs/compat_ioctl.c:61: include/linux/loop.h:59: error: field 'lo_bio_list' has incomplete type Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:16 UTC
117aff7 Al Viro 18 April 2009, 15:19:26 UTC Fix autofs_expire() mnt should remain the same for all iterations through the list; as it is, if we have a busy mount, mnt follows into it and isn't restored for the next iteration. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:15 UTC
24b6f16 Al Viro 18 April 2009, 07:25:41 UTC No need for crossing to mountpoint in audit_tag_tree() is_under() will DTRT anyway. And yes, is_subdir() behaviour is intentional. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:15 UTC
1644ccc Al Viro 18 April 2009, 06:32:31 UTC Safer nfsd_cross_mnt() AFAICS, we have a subtle bug there: if we have crossed mountpoint *and* it got mount --move'd away, we'll be holding only one reference to fs containing dentry - exp->ex_path.mnt. IOW, we ought to dput() before exp_put(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:15 UTC
e5d67f0 Al Viro 07 April 2009, 16:15:39 UTC Touch all affected namespaces on propagation of mount We shouldn't just touch the namespace of current process Caught-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:15 UTC
cf2706a Al Viro 07 April 2009, 13:03:30 UTC Fix AUTOFS_DEV_IOCTL_REQUESTER_CMD Missing conversion from kernel to userland dev_t; this sucker breaks as soon as we get sufficiently many autofs mounts for new_encode_dev(s_dev) != s_dev. Note: this is the minimal fix. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 April 2009, 03:01:15 UTC
8c31813 Toshinobu Sugioka 20 April 2009, 22:34:53 UTC sh: Fix mmap2 for handling differing PAGE_SIZEs. mmap2 uses a fixed page shift of 12, regardless of the PAGE_SIZE setting. Fix up the mmap2 code to add some sanity checks on the mapping, and to update pgoff accordingly. Error handling bits based on 4280e3126f641898f0ed1a931645373d3489e2a6 ("frv: fix mmap2 error handling"). Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 20 April 2009, 22:34:53 UTC
8c594ea Chris Mason 20 April 2009, 19:50:10 UTC Btrfs: use the right node in reada_for_balance reada_for_balance was using the wrong index into the path node array, so it wasn't reading the right blocks. We never directly used the results of the read done by this function because the btree search is started over at the end. This fixes reada_for_balance to reada in the correct node and to avoid searching past the last slot in the node. It also makes sure to hold the parent lock while we are finding the nodes to read. Signed-off-by: Chris Mason <chris.mason@oracle.com> 20 April 2009, 19:53:09 UTC
11c8349 Chris Mason 20 April 2009, 19:50:09 UTC Btrfs: fix oops on page->mapping->host during writepage The extent_io writepage call updates the writepage index in the inode as it makes progress. But, it was doing the update after unlocking the page, which isn't legal because page->mapping can't be trusted once the page is unlocked. This lead to an oops, especially common with compression turned on. The fix here is to update the writeback index before unlocking the page. Signed-off-by: Chris Mason <chris.mason@oracle.com> 20 April 2009, 19:53:09 UTC
d313d7a Chris Mason 20 April 2009, 19:50:09 UTC Btrfs: add a priority queue to the async thread helpers Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a higher priority. But, the checksumming helper threads prevent it from being fully effective. There are two problems. First, a big queue of pending checksumming will delay the synchronous IO behind other lower priority writes. Second, the checksumming uses an ordered async work queue. The ordering makes sure that IOs are sent to the block layer in the same order they are sent to the checksumming threads. Usually this gives us less seeky IO. But, when we start mixing IO priorities, the lower priority IO can delay the higher priority IO. This patch solves both problems by adding a high priority list to the async helper threads, and a new btrfs_set_work_high_prio(), which is used to make put a new async work item onto the higher priority list. The ordering is still done on high priority IO, but all of the high priority bios are ordered separately from the low priority bios. This ordering is purely an IO optimization, it is not involved in data or metadata integrity. Signed-off-by: Chris Mason <chris.mason@oracle.com> 20 April 2009, 19:53:08 UTC
ffbd517 Chris Mason 20 April 2009, 19:50:09 UTC Btrfs: use WRITE_SYNC for synchronous writes Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for writes we plan on waiting on in the near future. This patch mirrors recent changes in other filesystems and the generic code to use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for other latency critical writes. Btrfs uses async worker threads for checksumming before the write is done, and then again to actually submit the bios. The bio submission code just runs a per-device list of bios that need to be sent down the pipe. This list is split into low priority and high priority lists so the WRITE_SYNC IO happens first. Signed-off-by: Chris Mason <chris.mason@oracle.com> 20 April 2009, 19:53:08 UTC
608faf1 Linus Torvalds 20 April 2009, 19:34:36 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix allmodconfig compilation breakage. [IA64] smp_flush_tlb_mm() should only send IPI's to cpus in cpu_vm_mask [IA64] export smp_send_reschedule 20 April 2009, 19:34:36 UTC
05f0ecb Isaku Yamahata 18 April 2009, 03:15:23 UTC [IA64] fix allmodconfig compilation breakage. This patch fixes the following compilation error caused by recursive inclusion of kernel.h which defines BUILD_BUG_ON(). In this case, the case it catches will be caught by the case CONFIG_PARAVIRT=n, so removing it would not hurt compile time check very much. So fix the breakage by removing it. CC arch/ia64/kernel/asm-offsets.s In file included from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/ia64/kernel/asm-offsets.c:9: arch/ia64/include/asm/bitops.h: In function 'set_bit': arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON' Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com> 20 April 2009, 16:46:29 UTC
a939b96 Linus Torvalds 20 April 2009, 15:43:06 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM/Suspend: Introduce two new platform callbacks to avoid breakage 20 April 2009, 15:43:06 UTC
5cab385 Linus Torvalds 20 April 2009, 15:42:48 UTC Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: agp: zero pages before sending to userspace drm: check for minor master before allowing drop master. drm: set/clear is_master when master changed drm: clean dirty memory after device release drm: count reaches -1 20 April 2009, 15:42:48 UTC
2edbdd1 Linus Torvalds 20 April 2009, 15:37:37 UTC Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: support bitmaps on RAID10 arrays larger then 2 terabytes md: update sync_completed and reshape_position even more often. md: improve usefulness and accuracy of sysfs file md/sync_completed. md: allow setting newly added device to 'in_sync' via sysfs. md: tiny md.h cleanups 20 April 2009, 15:37:37 UTC
a5432f5 David Howells 20 April 2009, 14:46:45 UTC FS-Cache: Add MAINTAINERS record for FS-Cache and CacheFiles Add MAINTAINERS record for FS-Cache and CacheFiles. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 April 2009, 15:12:59 UTC
f297bfe David Howells 20 April 2009, 11:46:24 UTC FRV: Don't attempt to #include <linux/blk.h> as it doesn't exist Stop the FRV arch from attempting to #include <linux/blk.h> as it doesn't exist. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 April 2009, 15:12:59 UTC
8a577ff Kay Sievers 18 April 2009, 22:05:45 UTC driver: dont update dev_name via device_add path notice one system /proc/iomem some entries missed the name for pci_devices it turns that dev->dev.kobj name is changed after device_add. for pci code: via acpi_pci_root_driver.ops.add (aka acpi_pci_root_add) ==> pci_acpi_scan_root is used to scan pci bus/device, and at the same time we read the resource for pci_dev in the pci_read_bases, we have res->name = pci_name(pci_dev); pci_name is calling dev_name. later via acpi_pci_root_driver.ops.start (aka acpi_pci_root_start) ==> pci_bus_add_device to add all pci_dev in kobj tree. pci_bus_add_device will call device_add. actually in device_add /* first, register with generic layer. */ error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev)); if (error) goto Error; will get one new name for that kobj, old name is freed. [Impact: fix corrupted names in /proc/iomem ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 April 2009, 15:12:58 UTC
e56985d Steven Whitehouse 20 April 2009, 08:45:54 UTC GFS2: Fix page_mkwrite() return code This allows for the possibility of returning VM_FAULT_OOM as well as VM_FAULT_SIGBUS. This ensures that the correct action is taken. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 20 April 2009, 15:02:02 UTC
52fcd11 Steven Whitehouse 20 April 2009, 07:58:45 UTC GFS2: Clear dirty bit at end of inode glock sync The dirty bit can get set during the inode glock sync. Its too complicated to change that at the moment, so this is the quick fix - to clear the bit again at the end of the function. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 20 April 2009, 08:05:21 UTC
1f59390 NeilBrown 20 April 2009, 01:50:24 UTC md: support bitmaps on RAID10 arrays larger then 2 terabytes .. and other arrays with components larger than 2 terabytes. We use a "long" rather than a "sector_t" in part of the bitmap size calculations, which is sad. Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: NeilBrown <neilb@suse.de> 20 April 2009, 01:50:24 UTC
59de2be Shaohua Li 20 April 2009, 00:08:35 UTC agp: zero pages before sending to userspace AGP pages might be mapped into userspace finally, so the pages should be set to zero before userspace can use it. Otherwise there is potential information leakage. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 20 April 2009, 00:08:35 UTC
07f1c7a Dave Airlie 19 April 2009, 23:32:50 UTC drm: check for minor master before allowing drop master. When fast user switching a lot eventually we get to the point, where we were checking for the wrong thing in this function. Signed-off-by: Dave Airlie <airlied@redhat.com> 20 April 2009, 00:04:28 UTC
6b00842 Jonas Bonn 16 April 2009, 07:00:02 UTC drm: set/clear is_master when master changed The variable is_master is being used to track the drm_file that is currently master, so its value needs to be updated accordingly when the master is changed. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Dave Airlie <airlied@redhat.com> 20 April 2009, 00:04:28 UTC
77d26dc Ma Ling 16 April 2009, 09:51:25 UTC drm: clean dirty memory after device release In current code we register/unregister connector object by drm_sysfs_connector_add/remove function. However under some cases, we need to dynamically register or unregister device multiple times, so we have to go through register -> unregister ->register routine. Because after device_unregister function our memory is dirty, we need to do clean operation in order to re-register the device, otherwise the system will crash. The patch intends to clean device after device release. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 20 April 2009, 00:03:46 UTC
d9c6f54 Roel Kluin 16 April 2009, 20:57:46 UTC drm: count reaches -1 With a postfix decrement in the test count will reach -1 rather than 0, subsequent tests fail. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 19 April 2009, 23:28:20 UTC
6a7c7ea Rafael J. Wysocki 19 April 2009, 18:08:42 UTC PM/Suspend: Introduce two new platform callbacks to avoid breakage Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend code ordering) changed the ordering of suspend code in such a way that the platform .prepare() callback is now executed after the device drivers' late suspend callbacks have run. Unfortunately, this turns out to break ARM platforms that need to talk via I2C to power control devices during the .prepare() callback. For this reason introduce two new platform suspend callbacks, .prepare_late() and .wake(), that will be called just prior to disabling non-boot CPUs and right after bringing them back on line, respectively, and use them instead of .prepare() and .finish() for ACPI suspend. Make the PM core execute the .prepare() and .finish() platform suspend callbacks where they were executed previously (that is, right after calling the regular suspend methods provided by device drivers and right before executing their regular resume methods, respectively). It is not necessary to make analogous changes to the hibernation code and data structures at the moment, because they are only used by ACPI platforms. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Len Brown <len.brown@intel.com> 19 April 2009, 18:08:42 UTC
d91dfbb Linus Torvalds 19 April 2009, 17:58:20 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio: lguest: document 32-bit and PAE requirements lguest: tell git to ignore Documentation/lguest/lguest virtio: fix suspend when using virtio_balloon lguest: fix guest crash on non-linear addresses in gdt pvops lguest: fix crash on vmlinux images 19 April 2009, 17:58:20 UTC
af8f937 Linus Torvalds 19 April 2009, 17:57:38 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Set function_id only on FG nodes ALSA: MAINTAINERS - Update SOUND ALSA: emu10k1 - off by 1 in snd_emu10k1_wait() ASoC: OMAP: Fix FS polarity in OSK5912 machine driver ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driver ASoC: Fix include build error in s3c2412-i2s.c ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate ASoC: Fix jive_wm8750.c build problems ASoC: pxa-ssp: allow setting of dai format 0 ALSA: hda - Add upper-limit of mixer amp for AD1884A-laptop model, too ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecs ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600) ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934 ALSA: hda_intel.c - Consolidate bitfields 19 April 2009, 17:57:38 UTC
091ccb0 Linus Torvalds 19 April 2009, 17:54:06 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: introduce subdir-ccflags-y kbuild: support include/generated 19 April 2009, 17:54:06 UTC
c0b7988 Samuel Thibault 18 April 2009, 20:17:17 UTC Revert "console ASCII glyph 1:1 mapping" This reverts commit 1c55f18717304100a5f624c923f7cb6511b4116d. Ingo Brueckl was assuming that reverting to 1:1 mapping for chars >= 128 was not useful, but it happens to be: due to the limitations of the Linux console, when a blind user wants to read BIG5 on it, he has no other way than loading a font without SFM and let the 1:1 mapping permit the screen reader to get the BIG5 encoding. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 April 2009, 17:51:40 UTC
42a17ad Ralf Baechle 18 April 2009, 09:30:56 UTC <linux/seccomp.h> needs to include <linux/errno.h>. <linux/seccomp.h> uses EINVAL so should include <linux/errno.h>. This fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 April 2009, 17:47:45 UTC
613cbe3 Andi Kleen 19 April 2009, 16:40:43 UTC Don't set relatime when noatime is specified Since commit 0a1c01c9477602ee8b44548a9405b2c1d587b5a2 ("Make relatime default") when a file system is mounted explicitely with noatime it gets both the MNT_RELATIME and MNT_NOATIME bits set. This shows up like this in /proc/mounts: /dev/xxx /yyy ext3 rw,noatime,relatime,errors=continue,data=writeback 0 0 That looks strange. The VFS uses noatime in this case, but both flags are set. So it's more a cosmetic issue, but still better to fix. Cc: mjg@redhat.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 April 2009, 17:46:47 UTC
38cfe96 Rusty Russell 20 April 2009, 05:14:02 UTC lguest: document 32-bit and PAE requirements Robert noted that we don't actually document that lguest is 32-bit only, nor that PAE must be off (CONFIG_PAE is now prompted for if HIGHMEM is set to "off). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: lguest@ozlabs.org Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> 19 April 2009, 13:44:02 UTC
9536c26 Matt Kraai 17 April 2009, 06:46:20 UTC lguest: tell git to ignore Documentation/lguest/lguest This is the example lguest launcher binary. Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 19 April 2009, 13:44:02 UTC
84a139a Marcelo Tosatti 17 April 2009, 00:14:04 UTC virtio: fix suspend when using virtio_balloon Break out of wait_event_interruptible() if freezing has been requested, in the vballoon thread. Without this change vballoon refuses to stop and the system can't suspend. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org 19 April 2009, 13:44:01 UTC
a489f0b Rusty Russell 20 April 2009, 05:14:00 UTC lguest: fix guest crash on non-linear addresses in gdt pvops Fixes guest crash 'lguest: bad read address 0x4800000 len 256' The new per-cpu allocator ends up handing a non-linear address to write_gdt_entry. We do __pa() on it, and hand it to the host, which kills us. I've long wanted to make the hypercall "LOAD_GDT_ENTRY" to match the IDT code, but had no pressing reason until now. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: lguest@ozlabs.org 19 April 2009, 13:44:01 UTC
88df781 Matias Zabaljauregui 08 April 2009, 20:58:39 UTC lguest: fix crash on vmlinux images Typical message: 'lguest: unhandled trap 6 at 0x418726 (0x0)' vmlinux guests were broken by 4cd8b5e2a159f18a1507f1187b44a1acbfa6341b 'lguest: use KVM hypercalls', which rewrites guest text from kvm hypercalls to trap 31. The Launcher mmaps the kernel image. The Guest executes and immediately faults in the first text page (read-only). Then it hits a hypercall, and we rewrite that hypercall, causing a copy-on-write. But the Guest pagetables still refer to the old page: we fault again, but as Host we see the hypercall already rewritten, and pass the fault back to the Guest. The Guest hasn't set up an IDT yet, so we kill it. This doesn't happen with bzImages: they unpack themselves and so the text pages are already read-write. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Patrick McHardy <kaber@trash.net> 19 April 2009, 13:44:00 UTC
d6aa764 Takashi Iwai 19 April 2009, 09:40:02 UTC Merge branch 'fix/misc' into for-linus * fix/misc: ALSA: MAINTAINERS - Update SOUND ALSA: emu10k1 - off by 1 in snd_emu10k1_wait() 19 April 2009, 09:40:02 UTC
81584a0 Takashi Iwai 19 April 2009, 09:39:57 UTC Merge branch 'fix/intel8x0' into for-linus * fix/intel8x0: ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600) ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934 19 April 2009, 09:39:57 UTC
7c4112a Takashi Iwai 19 April 2009, 09:39:46 UTC Merge branch 'fix/hda' into for-linus * fix/hda: ALSA: hda - Set function_id only on FG nodes ALSA: hda - Add upper-limit of mixer amp for AD1884A-laptop model, too ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecs ALSA: hda_intel.c - Consolidate bitfields 19 April 2009, 09:39:46 UTC
1e2ae4d Takashi Iwai 19 April 2009, 09:39:38 UTC Merge branch 'fix/asoc' into for-linus * fix/asoc: ASoC: OMAP: Fix FS polarity in OSK5912 machine driver ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driver ASoC: Fix include build error in s3c2412-i2s.c ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate ASoC: Fix jive_wm8750.c build problems ASoC: pxa-ssp: allow setting of dai format 0 19 April 2009, 09:39:38 UTC
720097d Sam Ravnborg 19 April 2009, 09:04:26 UTC kbuild: introduce subdir-ccflags-y Following patch introduce support for setting options to gcc that has effect for current directory and all subdirectories. The typical use case are an architecture or a subsystem that decide to cover all files with -Werror. Today alpha, mips and sparc uses -Werror in almost all their Makefile- with subdir-ccflag-y it is now simpler to do so as only the top-level directories needs to be covered. Likewise if we decide to cover a full subsystem such as net/ with -Werror this is done by adding a single line to net/Makefile. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> 19 April 2009, 09:12:12 UTC
f14875a Sam Ravnborg 18 April 2009, 21:51:08 UTC kbuild: support include/generated We need a location for generated files. Today they are spread over several places and bringing them together to a common place makes it obvious hat is generated and what isreal files. Al Viro originally suggested: include/gen Linus suggested to spell it out. This patch implement support for include/generated All files in include/generated are ignored by git. include/generated is removed during "make mrproper". With this we are ready to implement support for include/generated in the various architctures and in the base kernel. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> 19 April 2009, 09:12:06 UTC
ff54250 Linus Torvalds 19 April 2009, 04:44:24 UTC Remove 'recurse into child resources' logic from 'reserve_region_with_split()' This function is not actually used right now, since the original use case for it was done with insert_resource_expand_to_fit() instead. However, we now have another usage case that wants to basically do a "reserve IO resource, splitting around existing resources", however that one doesn't actually want the "recurse into the conflicting resource" logic at all. And since recursing into the conflicting resource was the most complex part, and isn't wanted, just remove it. Maybe we'll some day want both versions, but we can just resurrect the logic then. Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 April 2009, 04:44:24 UTC
back to top