Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
6847e15 Linus Torvalds 14 July 2009, 01:18:52 UTC Linux 2.6.31-rc3 14 July 2009, 01:18:52 UTC
1cf2968 Linus Torvalds 13 July 2009, 23:39:25 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix race between write_metadata_buffer and get_write_access ext4: Fix ext4_mb_initialize_context() to initialize all fields ext4: fix null handler of ioctls in no journal mode ext4: Fix buffer head reference leak in no-journal mode ext4: Move __ext4_journalled_writepage() to avoid forward declaration ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation ext4: Don't look at buffer_heads outside i_size. ext4: Fix goal inum check in the inode allocator ext4: fix no journal corruption with locale-gen ext4: Calculate required journal credits for inserting an extent properly ext4: Fix truncation of symlinks after failed write jbd2: Fix a race between checkpointing code and journal_get_write_access() ext4: Use rcu_barrier() on module unload. ext4: naturally align struct ext4_allocation_request ext4: mark several more functions in mballoc.c as noinline ext4: Fix potential reclaim deadlock when truncating partial block jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region ext4: Fix type warning on 64-bit platforms in tracing events header 13 July 2009, 23:39:25 UTC
96577c4 dingdinghua 13 July 2009, 21:55:35 UTC jbd2: fix race between write_metadata_buffer and get_write_access The function jbd2_journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in) too early; this could potentially allow another thread to call get_write_access on the buffer head, modify the data, and dirty it, and allowing the wrong data to be written into the journal. Fortunately, if we lose this race, the only time this will actually cause filesystem corruption is if there is a system crash or other unclean shutdown of the system before the next commit can take place. Signed-off-by: dingdinghua <dingdinghua85@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 13 July 2009, 21:55:35 UTC
4a390e0 Linus Torvalds 13 July 2009, 17:24:43 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME Staging: rtl8192su: convert to net_device_ops Staging: serqt_usb2: declare qt_open static in serqt_usb2 Staging: serqt_usb2: fix qt_close parameters in serqt_usb2 Staging: comedi: jr3_pci.c: add required includes Staging: meilhaus: add email address to TODO Staging: rspiusb: use NULL virtual address instead of a bogus one Staging: vt6655: compile fix Staging: rt2870: Add USB ID for Sitecom WL-608 13 July 2009, 17:24:43 UTC
a4dc323 Linus Torvalds 13 July 2009, 17:24:08 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: wm97xx_batery: replace driver_data with dev_get_drvdata() omap: video: remove direct access of driver_data Sound: remove direct access of driver_data driver model: fix show/store prototypes in doc. Firmware: firmware_class, fix lock imbalance Driver Core: remove BUS_ID_SIZE sparc: remove driver-core BUS_ID_SIZE partitions: fix broken uevent_suppress conversion devres: WARN() and return, don't crash on device_del() of uninitialized device 13 July 2009, 17:24:08 UTC
51feb98 Linus Torvalds 13 July 2009, 17:23:03 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits) USB: otg: fix module reinsert issue USB: handle zero-length usbfs submissions correctly USB: EHCI: report actual_length for iso transfers USB: option: remove unnecessary and erroneous code USB: cypress_m8: remove invalid Clear-Halt USB: musb_host: undo incorrect change in musb_advance_schedule() USB: fix LANGID=0 regression USB: serial: sierra driver id_table additions USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. USB: fix race leading to a write after kfree in usbfs USB: Sierra: fix oops upon device close USB: option.c: add A-Link 3GU device id USB: Serial: Add support for Arkham Technology adapters USB: Fix option_ms regression in 2.6.31-rc2 USB: gadget audio: select SND_PCM USB: ftdi: support NDI devices Revert USB: usbfs: deprecate and hide option for !embedded USB: usb.h: fix kernel-doc notation USB: RNDIS gadget, fix issues talking from PXA USB: serial: FTDI with product code FB80 and vendor id 0403 ... 13 July 2009, 17:23:03 UTC
8f8f013 Dave Kleikamp 13 July 2009, 16:02:24 UTC update JFS entry in MAINTAINERS JFS hasn't really been supported for a while. It's still maintained, but saying it's supported is a stretch. Updating my preferred email address as well. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 July 2009, 16:10:20 UTC
5fddcdb Huang Weiyi 13 July 2009, 14:09:25 UTC mn10300: remove duplicated #include Remove duplicated #include('s) in arch/mn10300/kernel/sys_mn10300.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 July 2009, 16:09:08 UTC
1d03d2b Jean Delvare 13 July 2009, 10:39:05 UTC Fix staging drivers after smp_lock.h redux Commit 405f55712dfe464b3240d7816cc4fe4174831be2 ("headers: smp_lock.h redux") broke the build of two staging drivers. Fix them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 July 2009, 16:09:08 UTC
833576b Theodore Ts'o 13 July 2009, 13:45:52 UTC ext4: Fix ext4_mb_initialize_context() to initialize all fields Pavel Roskin pointed out that kmemcheck indicated that ext4_mb_store_history() was accessing uninitialized values of ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc history. Fix this by initializing the entire structure to all zeros first. Also, two fields were getting doubly initialized by the caller of ext4_mb_initialize_context, so remove them for efficiency's sake. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 13 July 2009, 13:45:52 UTC
ac046f1 Peng Tao 13 July 2009, 13:30:17 UTC ext4: fix null handler of ioctls in no journal mode The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not flush the journal in no_journal mode. Otherwise, running resize2fs on a mounted no_journal partition triggers the following error messages: BUG: unable to handle kernel NULL pointer dereference at 00000014 IP: [<c039d282>] _spin_lock+0x8/0x19 *pde = 00000000 Oops: 0002 [#1] SMP Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 13 July 2009, 13:30:17 UTC
e6b5d30 Curt Wohlgemuth 13 July 2009, 13:07:20 UTC ext4: Fix buffer head reference leak in no-journal mode We found a problem with buffer head reference leaks when using an ext4 partition without a journal. In particular, calls to ext4_forget() would not to a brelse() on the input buffer head, which will cause pages they belong to to not be reclaimable. Further investigation showed that all places where ext4_journal_forget() and ext4_journal_revoke() are called are subject to the same problem. The patch below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit release of the buffer head when the journal handle isn't valid. Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 13 July 2009, 13:07:20 UTC
dc7520c Ajay Kumar Gupta 03 July 2009, 07:48:45 UTC USB: otg: fix module reinsert issue Platform_device instance (pd) is not set to NULL in usb_nop_xceiv_unregister() causing usb_nop_xceiv_register() to fail during module reinsert. From: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Babu Ravi <ravibabu@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> 12 July 2009, 22:16:41 UTC
9180135 Alan Stern 29 June 2009, 15:04:54 UTC USB: handle zero-length usbfs submissions correctly This patch (as1262) fixes a bug in usbfs: It refuses to accept zero-length transfers, and it insists that the buffer pointer be valid even if there is no data being transferred. The patch also consolidates a bunch of repetitive access_ok() checks into a single check, which incidentally fixes the lack of such a check for Isochronous URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:41 UTC
ec6d67e Alan Stern 29 June 2009, 18:34:59 UTC USB: EHCI: report actual_length for iso transfers This patch (as1259b) makes ehci-hcd return the total number of bytes transferred in urb->actual_length for Isochronous transfers. Until now, the actual_length value was unaccountably left at 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
f092c24 Alan Stern 09 July 2009, 16:58:43 UTC USB: option: remove unnecessary and erroneous code This patch (as1264) removes a bunch of unnecessary and erroneous stuff from the option USB-serial driver. Clearly there's no need to verify that the device pointer stored in the URBs is right or to store the same pointer over again. After all, the pointer can't change once it has been set up. There's also no need to call usb_clear_halt for the IN endpoint multiple times -- in fact, doing so is an error since every time after the first there will be active URBs queued for that endpoint. Since the Clear-Halts don't appear to be needed at all, the patch simply removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
4d2fae8 Alan Stern 09 July 2009, 16:59:57 UTC USB: cypress_m8: remove invalid Clear-Halt This patch (as1265) removes an erroneous call to usb_clear_halt from the cypress_m8 driver. The call isn't valid because it is made from interrupt context whereas usb_clear_halt is a blocking routine. Presumably the code has never been executed; if it did it would cause an oops. So instead treat -EPIPE like any other sort of unexplained error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
1fe975f Sergei Shtylyov 10 July 2009, 17:02:44 UTC USB: musb_host: undo incorrect change in musb_advance_schedule() Commit c9cd06b3d6ea825c62e277def929cc4315802b48 (musb_host: refactor URB giveback) included due to my overlook the change incorrect in the context of the current kernel -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
0cce2ed Daniel Mack 10 July 2009, 09:04:58 UTC USB: fix LANGID=0 regression commit b7af0bb ("USB: allow malformed LANGID descriptors") broke support for devices without string descriptor support. Reporting string descriptors is optional to USB devices, and a device lets us know it can't deal with strings by responding to the LANGID request with a STALL token. The kernel handled that correctly before b7af0bb came in, but failed hard if the LANGID was reported but broken. More than that, if a device was not able to provide string descriptors, the LANGID was retrieved over and over again at each string read request. This patch changes the behaviour so that a) the LANGID is only queried once b) devices which can't handle string requests are not asked again c) devices with malformed LANGID values have a sane fallback to 0x0409 Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
c5f3d87 Elina Pasheva 10 July 2009, 00:55:18 UTC USB: serial: sierra driver id_table additions - Updated the id_table with all devices that Sierra Wireless currently support - Re-ordered the contents of the id_table for better readability Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
1451141 Krzysztof Halasa 09 July 2009, 23:06:23 UTC USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
516a1a0 Oliver Neukum 08 July 2009, 17:09:23 UTC USB: fix race leading to a write after kfree in usbfs this fixes a race between async_completed() and proc_reapurbnonblock(). CPU A CPU B spin_lock(&ps->lock); list_move_tail(&as->asynclist, &ps->async_completed); spin_unlock(&ps->lock); if (!(as = async_getcompleted(ps))) return -EAGAIN; return processcompl(as, (void __user * __user *)arg); processcompl() calls free_async() which calls kfree(as) as->status = urb->status; if (as->signr) { sinfo.si_signo = as->signr; sinfo.si_errno = as->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid, as->euid, as->secid); } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb, as->userurb); write after kfree Signed-off-by: Oliver Neukum <oliver@neukum.org> 12 July 2009, 22:16:40 UTC
7bae0a0 Alan Stern 07 July 2009, 13:50:14 UTC USB: Sierra: fix oops upon device close This patch (as1263) fixes a mixup that occurred when conflicting patches for the sierra driver were merged incorrectly. The former sierra_shutdown routine should have been become sierra_release, not sierra_disconnect. The symptom this fixes is an oops when the device file is closed after a Sierra device has been unplugged (Bugzilla #13675). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Peter Naulls <peter@mushroomnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
c3325eb Anssi Hannula 06 July 2009, 16:08:59 UTC USB: option.c: add A-Link 3GU device id Add A-Link 3GU device id 1e0e:9200 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 1e0e:f000 device and must be switched to 1e0e:9200 mode either by using "eject CD" or usb_modeswitch. For the record, the device does not work with generic usbserial driver (usb disconnect when sending the ATDT command). Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
0601e11 Amit Kucheria 06 July 2009, 11:19:59 UTC USB: Serial: Add support for Arkham Technology adapters As reported by David Potts from Arkham Technology, the current driver works with their hardware on addition of the device ids. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
2ab2178 Jonathan McDowell 05 July 2009, 11:29:51 UTC USB: Fix option_ms regression in 2.6.31-rc2 Commit 32ebbe7b6ad44ae9c276419710b56de6ba705303 which filters the SCSI REZERO command in option_ms based on a SCSI INQUIRY with a vendor of Option breaks my Option Icon 225 (0af0:6971). This device returns a vendor of ZCOPTION for the ZeroCD device. The following trivial patch fixes things for me. Signed-Off-By: Jonathan McDowell <noodles@earth.li> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:40 UTC
0495073 Randy Dunlap 03 July 2009, 20:26:57 UTC USB: gadget audio: select SND_PCM Fix USB gadget audio: select SND_PCM, like many other sound drivers do, to fix build errors: drivers/built-in.o: In function `f_audio_playback_work': audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl' audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write' drivers/built-in.o: In function `_snd_pcm_hw_param_set': audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
b760dac Martin Geleynse 02 July 2009, 17:10:35 UTC USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
e12df02 Greg Kroah-Hartman 10 July 2009, 04:35:49 UTC Revert USB: usbfs: deprecate and hide option for !embedded This reverts commit cc71329b3b89b4a5be849b617f2c4f151f0b9213, so that Red Hat machines can boot properly. It seems that the Red Hat initrd code tries to watch the /proc/bus/usb/devices file to monitor usb devices showing up. While this task is prone to lots of races and does not show the true state of the system, they seem to like it. So for now, don't move this option under the EMBEDDED config option. Cc: Scott James Remnant <scott@canonical.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Peter Jones <pjones@redhat.com> Cc: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
e376bbb Randy Dunlap 18 June 2009, 17:39:11 UTC USB: usb.h: fix kernel-doc notation Fix usb.h kernel-doc warnings: Warning(include/linux/usb.h:918): Excess struct/union/enum/typedef member 'nodename' description in 'usb_device_driver' Warning(include/linux/usb.h:939): No description found for parameter 'nodename' Warning(include/linux/usb.h:1219): No description found for parameter 'sg' Warning(include/linux/usb.h:1219): No description found for parameter 'num_sgs' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
4e19f22 David Brownell 19 June 2009, 10:09:04 UTC USB: RNDIS gadget, fix issues talking from PXA The reworked Ethernet gadget has an RNDIS interop problem when used with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware, which currently has a hard time talking to MS-Windows hosts. The issue is that Microsoft requires USB_CLASS_COMM. Fix by tweaking the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS is used in some other device configuration. [ UPDATED: some "statements" were comma-terminated; fix that. ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Aric Blumer <aric@sdgsystems.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
b34efee Folkert van Heusden 19 June 2009, 20:14:42 UTC USB: serial: FTDI with product code FB80 and vendor id 0403 It seems an USB device with vendor id 0403 and product code FB80 has an FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm This device in fact is a true random generantor by comsci: http://comscire.com/Products/R2000KU/ So the following patch should add support for this device if I am correct. Not tested as I do not own this device (I would like support in the kernel so that my entropybroker application (which distributes entrop data (random values) between servers and clients)). From: Folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
6e40612 Jason Wessel 22 June 2009, 16:32:20 UTC USB: console: Fix regression in usb console on kernel boot The commit 335f8514f200e63d689113d29cb7253a5c282967 introduced a regression which stopped usb consoles from working correctly as a kernel boot console as well as interactive login device. The addition of the serial_close() which in turn calls tty_port_close_start() will change the reference count of port.count and warn about it. The usb console code had previously incremented the port.count to indicate it was making use of the device as a console and the forced change causes a double open on the usb device which leads to a non obvious kernel oops later on when the tty is freed. To fix the problem instead make use of port->console to track if the port is in fact an active console port to avoid double initialization of the usb serial device. The port.count is incremented and decremented only with in the scope of usb_console_setup() for the purpose of the low level driver initialization. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
bf7fbb0 Frans Pop 26 June 2009, 14:10:19 UTC USB: add missing class descriptions used in usb/devices file Added descriptions (for WIRELESS_CONTROLLER and MISC) were taken from the usb-devices script now included in usbutils. Also sort the classes in the same order as in include/linux/usb/ch9.h for easier comparison for future updates. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
d794a02 Oliver Neukum 28 June 2009, 21:34:14 UTC USB: fix memleak in usbfs This patch fixes a memory leak in devio.c::processcompl If writing to user space fails the packet must be discarded, as it already has been removed from the queue of completed packets. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
ba516de Alan Stern 29 June 2009, 21:36:14 UTC USB: EHCI: check for STALL before other errors This patch (as1257) revises the way ehci-hcd detects STALLs. The logic is a little peculiar because there's no hardware status bit specifically meant to indicate a STALL. You just have to guess that a STALL was received if the BABBLE bit (which is fatal) isn't set and the transfer stopped before all its retries were used up. The existing code doesn't do this properly, because it tests for MMF (Missed MicroFrame) and DBE (Data Buffer Error) before testing the retry counter. Thus, if a transaction gets either MMF or DBE the corresponding flag is set and the transaction is retried. If the second attempt receives a STALL then -EPIPE is the correct return value. But the existing code would see the MMF or DBE flag instead and return -EPROTO, -ENOSR, or -ECOMM. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
914b701 Alan Stern 29 June 2009, 14:47:30 UTC USB: EHCI: use the new clear_tt_buffer interface This patch (as1256) changes ehci-hcd and all the other drivers in the EHCI family to make use of the new clear_tt_buffer callbacks. When a Clear-TT-Buffer request is in progress for a QH, the QH is not allowed to be linked into the async schedule until the request is finished. At that time, if there are any URBs queued for the QH, it is linked into the async schedule. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:39 UTC
cb88a1b Alan Stern 29 June 2009, 14:43:32 UTC USB: fix the clear_tt_buffer interface This patch (as1255) updates the interface for calling usb_hub_clear_tt_buffer(). Even the name of the function is changed! When an async URB (i.e., Control or Bulk) going through a high-speed hub to a non-high-speed device is cancelled or fails, the hub's Transaction Translator buffer may be left busy still trying to complete the transaction. The buffer has to be cleared; that's what usb_hub_clear_tt_buffer() does. It isn't safe to send any more URBs to the same endpoint until the TT buffer is fully clear. Therefore the HCD needs to be told when the Clear-TT-Buffer request has finished. This patch adds a callback method to struct hc_driver for that purpose, and makes the hub driver invoke the callback at the proper time. The patch also changes a couple of names; "hub_tt_kevent" and "tt.kevent" now look rather antiquated. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:38 UTC
87ea8c8 Oliver Neukum 30 June 2009, 07:44:24 UTC USB: fix uninitialised variable in ti_do_download Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:38 UTC
71f9f6c Dan Williams 30 June 2009, 20:09:28 UTC USB: option: add Novatel Ovation MC760 Used by Virgin Mobile with the Broadband2Go service, for example. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:38 UTC
5186ffe Arseniy Lartsev 01 July 2009, 12:27:26 UTC USB: cdc-acm: work around some broken devices This patch introduces a work around for cdc-acm devices which are low speed contrary to the specification, which requires bulk endpoints which are banned in low speed and converted by usbcore to virtual interrupt endpoints if they are used nevertheless. Signed-off-by: Arseniy Lartsev <ars3n@yandex.ru> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
89368d3 David Brownell 01 July 2009, 10:36:16 UTC USB: musb: silence "suspend as a_wait_vrise is_active" msgs Get rid of some obnoxious and inappropriate messaging, mostly on DaVinci, when usbcore tries to autosuspend a root hub if just a mini/micro-A connector is connected. Symptom: endless stream of messages reading like: musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1 Improve that musb bus suspend primitive a bit. Take advantage of this call to update the OTG state machine if appropriate, moving the device out of the A_WAIT_VRISE state. There's basically no timer for that state transition just now, except with tusb6010; that can make trouble. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
6d84599 David Brownell 01 July 2009, 10:43:58 UTC USB: gadget: pxa25x compiler warning fix Fix config-dependent compiler warning: CC drivers/usb/gadget/pxa25x_udc.o drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq': drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
56a075d Philipp Zabel 01 July 2009, 10:42:45 UTC USB: gadget: pxa25x uses gpio_is_valid Use gpio_is_valid instead of assuming that every GPIO number != 0 is valid while 0 is not. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
30899ca Kevin Hilman 01 July 2009, 10:33:46 UTC USB: musb: davinci dm6446evm GPIO renumbering Numbering for GPIOs on the pcf857x chips on the dm644x EVM board changed when DaVinci chips with more GPIOs were supported. Update the GPIO number used for nVBUS_DRV. Longer term, we need a better abstraction of board-specific setup in this code so we're not hard-coding board specific GPIOs into the driver, but for now this at least gets it back to working with mainline davinci core code. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
d163ef2 David Brownell 01 July 2009, 10:32:43 UTC USB: musb: davinci dm355 updates (remainder) Finish merging updates for DM355 chips into musb/davinci.c now that its support is in mainline: kick in new DRVVBUS controls. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
6bc2146 Qiuping Chen 01 July 2009, 10:49:29 UTC USB: gadget: rndis conformance tweak Support OID_802_3_MAC_OPTIONS in gen_ndis_query_resp() of rndis.c to make RNDIS gadget pass 1c_SetMulticast subtest in Microsoft NDISTest6: http://www.microsoft.com/whdc/DevTools/tools/NDIStest.mspx The other tests in NDISTest6 are passed. [ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE setting ... it was bogus, this code only handles one entry, not 32. And we don't know what would break if we lied about that... ] Signed-off-by: Helen Chen <helen.chen@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
ca157c4 Oliver Neukum 02 July 2009, 14:41:39 UTC USB: fix memory leak in usbtmc If an error is returned kfree must also be called. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
45e8388 Arnd Bergmann 19 June 2009, 12:35:34 UTC USB: buildfix ppc randconfig We could just make the USB_OHCI_HCD_PPC_OF option implicit and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE and USB_OHCI_HCD_PPC_OF_LE are set. [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:37 UTC
3c43f27 Greg Kroah-Hartman 26 June 2009, 15:05:20 UTC USB: ti_usb_3410_5052: fix duplicate device ids. commit 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c accidentally added the device id to both tables in the driver, which causes problems as this is only a single port device, not a multiple port device. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
05cbc2d Greg Kroah-Hartman 23 June 2009, 23:01:06 UTC USB: gadget: audio: provide correct device id The audio gadget driver should use a "Linux" device id, instead of relying on NetChip's vendor id. So provide one out of our reserved namespace. Cc: Bryan Wu <cooloney@kernel.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
1a74826 Greg Kroah-Hartman 23 June 2009, 22:58:48 UTC Revert "USB: Add Intel Langwell USB OTG Transceiver Drive" This reverts commit 453f77558810ffa669ed5a510a7173ec49def396. The driver should not have been accepted as the MSRT code is not in the main kernel yet, which this depends on. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Hao Wu <hao.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
e3a3174 Brad Lu 16 June 2009, 10:04:00 UTC USB: option.c to support Qisda H21/H20 usb modem This patch added Qisda(VID) & H21/H20(PID) into to supporting list. Please help to check this patch, From: Brad Lu <Brad.Lu@Qisda.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
83dfdaa Kai Engert 12 June 2009, 06:51:37 UTC USB: option.c: add Qualcomm/Option iCON 210 modem Add modem portion of USB device labeled: Model iCON 210, Qualcomm 3G HSDPA, designed in EU by Option Device starts in usb-storage mode (1e0e:f000) and requires the use of a tool like usb_modeswitch to switch it to modem mode (1e0e:9000). Signed-off-by: Kai Engert <kaie@kuix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
4198e4f Mike Frysinger 12 June 2009, 01:59:00 UTC USB: isp1760: use __devexit_p() for remove function The isp1760_plat_remove function is declared with __devexit, so the .remove assignment needs to be wrapped with __devexit_p(). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
a455212 Alan Stern 11 June 2009, 18:56:22 UTC USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
9525dcb Roel Kluin 10 June 2009, 19:57:35 UTC USB: fhci: mutually exclusive port_status FHCI_PORT_DISABLED, -LOW and -FULL are mutually exclusive as status. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
9d37ff6 Jan Capek 10 June 2009, 16:58:52 UTC USB: ftdi_sio - product ID's for CCS PIC programmers The product ID's for the following devices have been added: - LOAD-n-GO - ICD-U64 - PRIME-8 Signed-off-by: Jan Capek <jan@ccsinfo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
c03e7d4 Paulius Zaleckas 09 June 2009, 08:11:16 UTC USB: gadget: fix imx_udc entry in Kconfig Move USB_GADGET_IMX to the right section of Kconfig as this controller is available only as integrated on i.MX CPU. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:36 UTC
8540d66 Gianpaolo Cugola 05 June 2009, 20:57:52 UTC USB: pl2303: New vendor and product id for the prolific driver I recently bought a PC interface for the Cressi Edy dive computer (www.cressi.it) and discovered that it uses the pl2303 chip, albeit with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in the process of writing a linux software for such device (cressi only provides a windows software), I patched the pl2303 linux driver to have the interface recognized. I am submitting you the patch (very basic) for inclusion in next kernel version. From: Gianpaolo Cugola <gianpaoloc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 22:16:35 UTC
f638718 Alexander Beregalov 20 June 2009, 16:58:33 UTC Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error See commit 2d0ddec5b2b (mac80211: unify config_interface and bss_info_changed) This fixes a build error. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
8231eb5 Herton Ronaldo Krzesinski 18 June 2009, 17:43:56 UTC Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board The current s626 comedi driver in staging conflicts with philips SAA7146 media/dvb based cards, because it claims the same vendor:device pci id for all subdevice/subvendor ids. What happens is that for people that have a philips SAA7146 media/dvb based card, s626 if available gets loaded by udev and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445). The s626 driver shouldn't claim all 1131:7146 devices. Fix this by specifying specific known subvendor:subdevice ids in its pci id table list. Also s626_attach is modified to use now pci_get_subsys instead of pci_get_device as reported by Ian Abbott, and now we loop over pci id table entries in case more ids are added in the future. Reference: http://lkml.org/lkml/2009/6/16/552 Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
91fca6d Dan Aloni 24 June 2009, 19:34:39 UTC Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME (adapted from the rtl8187se patch) ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and on certain conditions, the concatenated string will be larger than IFNAMSIZ including the terminating zero. length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17 This fix uses strl{cpy,cat} in addition to the reduction of the total possible length of the output string by a char. It can be applied to 2.6.30-stable as well. Signed-off-by: Dan Aloni <dan@aloni.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
02c8bae Dan Aloni 20 June 2009, 13:32:22 UTC Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME I repeatedly get __stack_chk_fail panic()s with this driver before applying the attached fix. ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and on certain conditions, the concatenated string will be larger than IFNAMSIZ including the terminating zero. length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17 This fix uses strl{cpy,cat} in addition to the reduction of the total possible length of the output string by a char. It can be applied to 2.6.30-stable as well. Signed-off-by: Dan Aloni <dan@aloni.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
77b9288 Bartlomiej Zolnierkiewicz 11 June 2009, 18:49:07 UTC Staging: rtl8192su: convert to net_device_ops commit e3804cbebb67887879102925961d41b503f7fbe3 removed COMPAT_NET_DEV_OPS so this change is needed to make rtl8192su buildable again. Loosely based on Alexander's patch for rtl8187se, untested. Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
35e2bed Bill Pemberton 19 June 2009, 16:32:57 UTC Staging: serqt_usb2: declare qt_open static in serqt_usb2 Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
d9dea3c Bill Pemberton 19 June 2009, 16:32:56 UTC Staging: serqt_usb2: fix qt_close parameters in serqt_usb2 The parameter list for qt_close() was from the old non usb-serial driver. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
9b5de0a Alexander Beregalov 19 June 2009, 23:52:47 UTC Staging: comedi: jr3_pci.c: add required includes Fix this build errors: jr3_pci.c:739: error: 'jiffies' undeclared jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies' jr3_pci.c:763: error: implicit declaration of function 'add_timer' jr3_pci.c:790: error: implicit declaration of function 'init_timer' jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:45 UTC
e5a85d2 Greg Kroah-Hartman 02 July 2009, 19:55:39 UTC Staging: meilhaus: add email address to TODO Meilhaus Support also wants to be notified of changes to these drivers. Cc: David Kiliani <mail@davidkiliani.de> Cc: Meilhaus Support <support@meilhaus.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:44 UTC
aea0d43 Pete Zaitcev 10 June 2009, 20:44:14 UTC Staging: rspiusb: use NULL virtual address instead of a bogus one The main problem here is that I just cannot see how this could ever be correct: usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr, (dma_addr_t *) sg_dma_address(&pdx->sgl[frameInfo][i]), sg_dma_len(&pdx->sgl[frameInfo][i]), You cannot take a DMA address, cast it to a _pointer to_ a DMA address, and then regard it as a virtual address of the transfer buffer. However, finding the right virtual address was too hard for me, so I just stubbed it with NULL. At least usbmon won't oops then (it will not show any data but it's better than crashing). Also, too big a buffer was allocated elsewhere. And since we're at it, drop clearly unnecessary usb_buffer_alloc too, leaving it where it may be useful. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:44 UTC
f408ade Alan Cox 10 June 2009, 16:30:49 UTC Staging: vt6655: compile fix At least make it compile Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:44 UTC
8dfb005 Jorrit Schippers 10 June 2009, 13:34:26 UTC Staging: rt2870: Add USB ID for Sitecom WL-608 Add the USB id 0x0DF6,0x003F to the rt2870.h file such that the Sitecom WL-608 device will be recognized by this driver. Signed-off-by: Jorrit Schippers <jorrit@ncode.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:21:44 UTC
38c7dc3 Alexander Beregalov 23 June 2009, 13:50:06 UTC wm97xx_batery: replace driver_data with dev_get_drvdata() direct access of driver_data is going away. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:10 UTC
5e9a8bd Greg Kroah-Hartman 23 June 2009, 15:31:46 UTC omap: video: remove direct access of driver_data dev_set/get_drvdata() should be used instead, as driver_data is going away. Cc: Imre Deak <imre.deak@nokia.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Trilok Soni <soni.trilok@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Contreras <felipe.contreras@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:10 UTC
864e1e8 Greg Kroah-Hartman 22 June 2009, 22:46:03 UTC Sound: remove direct access of driver_data This is the last in-kernel direct usage of driver_data, replace it with the proper dev_get/set_drvdata() calls. Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:10 UTC
909662e vibi sreenivasan 08 July 2009, 22:37:03 UTC driver model: fix show/store prototypes in doc. FIX prototypes for show & store method in struct driver_attribute Signed-off-by: vibi sreenivasan <vibi_sreenivasan@cms.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:10 UTC
308975f Jiri Slaby 21 June 2009, 21:57:31 UTC Firmware: firmware_class, fix lock imbalance Add omitted unlock in firmware_data_read. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:10 UTC
4ead0a2 Kay Sievers 02 July 2009, 21:25:44 UTC Driver Core: remove BUS_ID_SIZE The name size limit is gone from the driver-core, this is the removal of the last left-over. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:10 UTC
08f4287 Kay Sievers 02 July 2009, 21:27:22 UTC sparc: remove driver-core BUS_ID_SIZE The name size limit is gone from the driver-core, the BUS_ID_SIZE value will be removed. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:09 UTC
f8c73c7 Heiko Carstens 11 June 2009, 13:14:40 UTC partitions: fix broken uevent_suppress conversion git commit f67f129e "Driver core: implement uevent suppress in kobject" contains this chunk for fs/partitions/check.c: /* suppress uevent if the disk supresses it */ - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(pdev)) kobject_uevent(&pdev->kobj, KOBJ_ADD); However that should have been - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(ddev)) Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ming Lei <tom.leiming@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:09 UTC
eb8d3c6 Benjamin Herrenschmidt 10 June 2009, 19:43:02 UTC devres: WARN() and return, don't crash on device_del() of uninitialized device I just debugged an obscure crash caused by a device_del() of a all NULL'd out struct device (in usb-serial) and found that a patch like this one would have saved me time (in addition to improved chances of a bug report from users hitting similar driver bugs). [akpm@linux-foundation.org: cleanup] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 12 July 2009, 20:02:09 UTC
7638d53 Linus Torvalds 12 July 2009, 19:24:35 UTC Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6 * 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Remove alloc_bootmem annotations introduced in the past kmemleak: Add callbacks to the bootmem allocator kmemleak: Allow partial freeing of memory blocks kmemleak: Trace the kmalloc_large* functions in slub kmemleak: Scan objects allocated during a scanning episode kmemleak: Do not acquire scan_mutex in kmemleak_open() kmemleak: Remove the reported leaks number limitation kmemleak: Add more cond_resched() calls in the scanning thread kmemleak: Renice the scanning thread to +10 12 July 2009, 19:24:35 UTC
dd0d9a4 Artem Bityutskiy 09 July 2009, 09:44:30 UTC AFS: Fix compilation warning Fix the following warning: fs/afs/dir.c: In function 'afs_d_revalidate': fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function by marking the 'fid' variable as an uninitialized_var. The problem is that gcc doesn't always manage to work out that fid is always set on the path through the function that uses it. Cc: linux-afs@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2009, 19:24:07 UTC
405f557 Alexey Dobriyan 11 July 2009, 18:08:37 UTC headers: smp_lock.h redux * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2009, 19:22:34 UTC
f9fabcb Julien Tinnes 26 June 2009, 18:27:40 UTC personality: fix PER_CLEAR_ON_SETID We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO. The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE. We believe it is important to add MMAP_PAGE_ZERO, because by using this personality it is possible to have the first page mapped inside a process running as setuid root. This could be used in those scenarios: - Exploiting a NULL pointer dereference issue in a setuid root binary - Bypassing the mmap_min_addr restrictions of the Linux kernel: by running a setuid binary that would drop privileges before giving us control back (for instance by loading a user-supplied library), we could get the first page mapped in a process we control. By further using mremap and mprotect on this mapping, we can then completely bypass the mmap_min_addr restrictions. Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added since on x86 32bits it will in practice disable most of the address space layout randomization (only the stack will remain randomized). Signed-off-by: Julien Tinnes <jt@cr0.org> Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Acked-by: Christoph Hellwig <hch@infradead.org> Acked-by: Kees Cook <kees@ubuntu.com> Acked-by: Eugene Teo <eugene@redhat.com> [ Shortened lines and fixed whitespace as per Christophs' suggestion ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2009, 19:21:33 UTC
a137802 Linus Torvalds 12 July 2009, 18:25:04 UTC Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x This causes kernel images that don't run init to completion with certain broken gcc versions. This fixes kernel bugzilla entry: http://bugzilla.kernel.org/show_bug.cgi?id=13012 I suspect the gcc problem is this: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230 Fix the problem by using the -fno-strict-overflow flag instead, which not only does not exist in the known-to-be-broken versions of gcc (it was introduced later than fwrapv), but seems to be much less disturbing to gcc too: the difference in the generated code by -fno-strict-overflow are smaller (compared to using neither flag) than when using -fwrapv. Reported-by: Barry K. Nathan <barryn@pobox.com> Pushed-by: Frans Pop <elendil@planet.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2009, 18:25:04 UTC
8b9f2ca Linus Torvalds 11 July 2009, 18:32:28 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT hwmon: (sht15) Remove unnecessary semicolon hwmon: (max6650) Fix lock imbalance 11 July 2009, 18:32:28 UTC
81e4e1b Linus Torvalds 11 July 2009, 18:22:34 UTC Revert "fuse: Fix build error" as unnecessary This reverts commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21. Trond had a better fix, which is the parent of this one ("Fix compile error due to congestion_wait() changes") Requested-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 July 2009, 18:22:34 UTC
373c0a7 Trond Myklebust 11 July 2009, 14:06:54 UTC Fix compile error due to congestion_wait() changes Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h so that it is available to all callers of set/clear_bdi_congested(). This replaces commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21 ("fuse: Fix build error"), which will be reverted. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 July 2009, 18:22:26 UTC
ec05a8d Alistair John Strachan 11 July 2009, 11:42:38 UTC hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: dan <dan@deeog.com> Tested-by: Nygel Lyndley <nygel.lyndley@gmail.com> Tested-by: Dmitriy Fedchenko <dmitriy-fedc@yandex.ru> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 11 July 2009, 11:42:38 UTC
24205e0 Joe Perches 11 July 2009, 11:42:37 UTC hwmon: (sht15) Remove unnecessary semicolon Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 11 July 2009, 11:42:37 UTC
025dc74 Jiri Slaby 11 July 2009, 11:42:37 UTC hwmon: (max6650) Fix lock imbalance Add omitted update_lock to one switch/case in set_div. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> 11 July 2009, 11:42:37 UTC
f00caa7 Linus Torvalds 11 July 2009, 02:19:09 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section ASoC: Fix wm8753 register cache size and initialization ASoC: add locking to mpc5200-psc-ac97 driver ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared ASoC: Fix register cache initialisation for WM8753 11 July 2009, 02:19:09 UTC
8711c67 Bartlomiej Zolnierkiewicz 10 July 2009, 10:34:27 UTC isofs: fix Joliet regression commit 5404ac8e4418ab3d254950ee4f9bcafc1da20b4a ("isofs: cleanup mount option processing") missed conversion of joliet option flag resulting in non-working Joliet support. CC: walt <w41ter@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 July 2009, 02:18:59 UTC
d4fc4a7 Alan Cox 09 July 2009, 12:36:58 UTC tty: Fix the PL2303 private methods for sysrq PL2303 has private data shovelling methods that also have no fast path. Fix them to work the same way as the default handler. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 July 2009, 02:17:22 UTC
24a15a6 Alan Cox 09 July 2009, 12:36:22 UTC tty: Fix USB kref leak The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 July 2009, 02:17:22 UTC
4cd1de0 Alan Cox 09 July 2009, 12:35:52 UTC tty: Sort out the USB sysrq changes that wrecked performance We can't go around calling all sorts of magic per character functions at full rate 3G data speed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 July 2009, 02:17:22 UTC
d6be791 Linus Torvalds 11 July 2009, 02:15:34 UTC Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6 * 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix compilation warnings UBI: fix NOR flash recovery UBI: nicify image sequence number handling UBI: add image sequence number to EC header UBI: remove bogus debugging checks UBI: add empty eraseblocks verification 11 July 2009, 02:15:34 UTC
44c695b Linus Torvalds 11 July 2009, 02:14:48 UTC Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6 * 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix corruption dump UBIFS: clean up free space checking UBIFS: small amendments in the LEB scanning code UBIFS: dump a little more in case of corruptions MAINTAINERS: update ahunter's e-mail address UBIFS: allow more than one volume to be mounted UBIFS: fix assertion warning UBIFS: minor spelling and grammar fixes UBIFS: fix 64-bit divisions in debug print UBIFS: few spelling fixes UBIFS: set write-buffer timout to 3-5 seconds UBIFS: slightly optimize write-buffer timer usage UBIFS: improve debugging messaged UBIFS: fix integer overflow warning 11 July 2009, 02:14:48 UTC
eee33ab Linus Torvalds 11 July 2009, 02:12:51 UTC Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] define KTIME_SCALAR for 32-bit s390 [S390] add generic atomic64 support for 31 bit [S390] improve suspend/resume error messages [S390] set SCHED_OMIT_FRAME_POINTER for s390 [S390] add __ucmpdi2() helper function [S390] perf_counter build fix [S390] shutdown actions: save/return rc from init function [S390] dasd: correct debugfeature sense dump [S390] udelay: disable lockdep to avoid false positives [S390] monreader: fix dev_set_drvdata conversion [S390] sclp: fix compile error for !SCLP_CONSOLE 11 July 2009, 02:12:51 UTC
back to top