Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
374576a Linus Torvalds 05 October 2009, 00:12:30 UTC Linux 2.6.32-rc3 I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in order to avoid confusion, I'm jumping from -rc1 to -rc3. That way, when 'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about whether people perhaps meant -rc1 or -rc2. 05 October 2009, 00:12:30 UTC
a99bbaf Alexey Dobriyan 04 October 2009, 12:11:37 UTC headers: remove sched.h from poll.h Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 October 2009, 22:05:10 UTC
5e5027b Linus Torvalds 04 October 2009, 22:03:00 UTC Merge branch 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acpi_pad: build only on X86 ACPI: create Processor Aggregator Device driver Fixup trivial conflicts in MAINTAINERS file. 04 October 2009, 22:03:00 UTC
6d5ee26 Linus Torvalds 04 October 2009, 22:00:08 UTC Merge branch 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6 * 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6: SFI: remove __init from sfi_verify_table SFI: fix section mismatch warnings in sfi_core.c 04 October 2009, 22:00:08 UTC
5001f86 Linus Torvalds 04 October 2009, 21:59:53 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: EC: Don't parse DSDT for EC early init on Compal ACPI: EC: Rewrite DMI checks ACPI: dock: fix "sibiling" typo ACPI: kill overly verbose "throttling states" log messages ACPI: Fix bound checks for copy_from_user in the acpi /proc code ACPI: fix bus scanning memory leaks ACPI: EC: Restart command even if no interrupts from EC sony-laptop: Don't unregister the SPIC driver if it wasn't registered sony-laptop: remove _INI call at init time sony-laptop: SPIC unset IRQF_SHARED, set IRQF_DISABLED sony-laptop: remove device_ctrl and the SPIC mini drivers 04 October 2009, 21:59:53 UTC
663cc81 Linus Torvalds 04 October 2009, 21:59:14 UTC Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: macintosh: Don't assume i2c device probing always succeeds i2c: Hide probe errors caused by ACPI resource conflicts i2c: Minor documentation update mfd: AB3100 drop unused module parameters Staging: IIO: tsl2561: Drop unused module parameters leds: leds-pca9532 - Drop unused module parameters ltc4215/ltc4245: Discard obsolete detect methods ds2482: Discard obsolete detect method max6875: Discard obsolete detect method i2c: Move misc devices documentation 04 October 2009, 21:59:14 UTC
6f6b35e Jean Delvare 04 October 2009, 20:53:46 UTC macintosh: Don't assume i2c device probing always succeeds If i2c device probing fails, then there is no driver to dereference after calling i2c_new_device(). Stop assuming that probing will always succeed, to avoid NULL pointer dereferences. We have an easier access to the driver anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Tim Shepard <shep@alum.mit.edu> Cc: Colin Leroy <colin@colino.net> 04 October 2009, 20:53:46 UTC
18669ea Jean Delvare 04 October 2009, 20:53:45 UTC i2c: Hide probe errors caused by ACPI resource conflicts When an ACPI resource conflict is detected, error messages are already printed by ACPI. There's no point in causing the driver core to print more error messages, so return one of the error codes for which no message is printed. This fixes bug #14293: http://bugzilla.kernel.org/show_bug.cgi?id=14293 Signed-off-by: Jean Delvare <khali@linux-fr.org> 04 October 2009, 20:53:45 UTC
03f1805 Jean Delvare 04 October 2009, 20:53:45 UTC i2c: Minor documentation update The sysfs path to i2c adapters has changed recently, update the documentation to reflect that change. Signed-off-by: Jean Delvare <khali@linux-fr.org> 04 October 2009, 20:53:45 UTC
dcffa12 Jean Delvare 04 October 2009, 20:53:44 UTC mfd: AB3100 drop unused module parameters The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which implement device detection. The ab3100 driver doesn't, so there is no point in calling it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Samuel Ortiz <sameo@linux.intel.com> 04 October 2009, 20:53:44 UTC
0d83f18 Jean Delvare 04 October 2009, 20:53:43 UTC Staging: IIO: tsl2561: Drop unused module parameters The I2C_CLIENT_INSMOD macro is only useful for i2c drivers which implement device detection. The tsl2561 driver doesn't, so there is no point in calling it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> 04 October 2009, 20:53:43 UTC
7727986 Jean Delvare 04 October 2009, 20:53:43 UTC leds: leds-pca9532 - Drop unused module parameters The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which implement device detection. The leds-pca9532 driver doesn't, so there is no point in calling it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Riku Voipio <riku.voipio@iki.fi> 04 October 2009, 20:53:43 UTC
2d2a7cf Jean Delvare 04 October 2009, 20:53:42 UTC ltc4215/ltc4245: Discard obsolete detect methods There is no point in implementing a detect callback for the LTC4215 and LTC4245, as these devices can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callbacks. This shrinks the binary module sizes by 36% and 46%, respectively. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ira W. Snyder <iws@ovro.caltech.edu> 04 October 2009, 20:53:42 UTC
0314b02 Jean Delvare 04 October 2009, 20:53:41 UTC ds2482: Discard obsolete detect method There is no point in implementing a detect callback for the DS2482, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This shrinks the binary module size by 21%. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Gardner <gardner.ben@gmail.com> 04 October 2009, 20:53:41 UTC
b835d7f Jean Delvare 04 October 2009, 20:53:41 UTC max6875: Discard obsolete detect method There is no point in implementing a detect callback for the MAX6875, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This basically divides the binary module size by 2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> 04 October 2009, 20:53:41 UTC
f546c65 Jean Delvare 04 October 2009, 20:53:40 UTC i2c: Move misc devices documentation Some times ago the eeprom and max6875 drivers moved to drivers/misc/eeprom, but their documentation did not follow. It's finally time to get rid of Documentation/i2c/chips. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <gardner.ben@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> 04 October 2009, 20:53:40 UTC
58e57fb Linus Torvalds 04 October 2009, 19:39:14 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits) Revert "Seperate read and write statistics of in_flight requests" cfq-iosched: don't delay async queue if it hasn't dispatched at all block: Topology ioctls cfq-iosched: use assigned slice sync value, not default cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' cfq-iosched: implement slower async initiate and queue ramp up cfq-iosched: delay async IO dispatch, if sync IO was just done cfq-iosched: add a knob for desktop interactiveness Add a tracepoint for block request remapping block: allow large discard requests block: use normal I/O path for discard requests swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL fs/bio.c: move EXPORT* macros to line after function Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs cciss: fix build when !PROC_FS block: Do not clamp max_hw_sectors for stacking devices block: Set max_sectors correctly for stacking devices cciss: cciss_host_attr_groups should be const cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Add usage_count attribute to each logical drive in /sys ... 04 October 2009, 19:39:14 UTC
0f78ab9 Jens Axboe 04 October 2009, 19:04:38 UTC Revert "Seperate read and write statistics of in_flight requests" This reverts commit a9327cac440be4d8333bba975cbbf76045096275. Corrado Zoccolo <czoccolo@gmail.com> reports: "with 2.6.32-rc1 I started getting the following strange output from "iostat -kx 2": Linux 2.6.31bisect (et2) 04/10/2009 _i686_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 10,70 0,00 3,16 15,75 0,00 70,38 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 18,22 0,00 0,67 0,01 14,77 0,02 43,94 0,01 10,53 39043915,03 2629219,87 sdb 60,89 9,68 50,79 3,04 1724,43 50,52 65,95 0,70 13,06 488437,47 2629219,87 avg-cpu: %user %nice %system %iowait %steal %idle 2,72 0,00 0,74 0,00 0,00 96,53 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 6,68 0,00 0,99 0,00 0,00 92,33 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 4,40 0,00 0,73 1,47 0,00 93,40 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 4,00 0,00 3,00 0,00 28,00 18,67 0,06 19,50 333,33 100,00 Global values for service time and utilization are garbage. For interval values, utilization is always 100%, and service time is higher than normal. I bisected it down to: [a9327cac440be4d8333bba975cbbf76045096275] Seperate read and write statistics of in_flight requests and verified that reverting just that commit indeed solves the issue on 2.6.32-rc1." So until this is debugged, revert the bad commit. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 04 October 2009, 19:04:38 UTC
e00c54c Jens Axboe 04 October 2009, 18:36:19 UTC cfq-iosched: don't delay async queue if it hasn't dispatched at all We cannot delay for the first dispatch of the async queue if it hasn't dispatched at all, since that could present a local user DoS attack vector using an app that just did slow timed sync reads while filling memory. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 04 October 2009, 18:36:19 UTC
8a0382f Linus Torvalds 04 October 2009, 04:57:06 UTC Merge branch 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev * 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r: Fix IPI function calls for SMP m32r: Fix set_memory() for DISCONTIGMEM m32r: add rtc_lock variable m32r: define ioread* and iowrite* macros m32r: export delay loop symbols m32r: fix tme_handler 04 October 2009, 04:57:06 UTC
0b5759c Linus Torvalds 04 October 2009, 04:44:21 UTC tty: Avoid dropping ldisc_mutex over hangup tty re-initialization A couple of people have hit the WARN_ON() in drivers/char/tty_io.c, tty_open() that is unhappy about seeing the tty line discipline go away during the tty hangup. See for example http://bugzilla.kernel.org/show_bug.cgi?id=14255 and the reason is that we do the tty_ldisc_halt() outside the ldisc_mutex in order to be able to flush the scheduled work without a deadlock with vhangup_work. However, it turns out that we can solve this particular case by - using "cancel_delayed_work_sync()" in tty_ldisc_halt(), which waits for just the particular work, rather than synchronizing with any random outstanding pending work. This won't deadlock, since the buf.work we synchronize with doesn't care about the ldisc_mutex, it just flushes the tty ldisc buffers. - realize that for this particular case, we don't need to wait for any hangup work, because we are inside the hangup codepaths ourselves. so as a result we can just drop the flush_scheduled_work() entirely, and then move the tty_ldisc_halt() call to inside the mutex. That way we never expose the partially torn down ldisc state to tty_open(), and hold the ldisc_mutex over the whole sequence. Reported-by: Ingo Molnar <mingo@elte.hu> Reported-by: Heinz Diehl <htd@fancy-poultry.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 October 2009, 04:44:21 UTC
0a3d31b Toshihiro HANAWA 02 October 2009, 08:52:54 UTC m32r: Fix IPI function calls for SMP This patch fixes the m32r SMP kernel after 2.6.27. A part of the following patch breaks m32r SMP operation. > m32r: convert to generic helpers for IPI function calls > commit 7b7426c8a615cf61df9a77b9df7d5b75d91e3fa0 In the above patch, a CALL_FUNC_SINGLE_IPI was newly introduced, but the its IPI vector number was wrong in the patch code. The m32r SMP kernel hanged-up during boot operation, because the CPU_BOOT_IPI was called instead of CALL_FUNC_SINGLE_IPI (CPU_BOOT_IPI had no side effect at that time because the 2nd core had already been started up), as a result, csd_unlock() was not called, then a dead lock occurred in csd_lock_wait() after the detection of Compact Flash memory as IDE generic disk. Signed-off-by: Toshihiro HANAWA <hanawa@ccs.tsukuba.ac.jp> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> 04 October 2009, 03:02:37 UTC
6b6fabc Hirokazu Takata 23 September 2009, 12:37:06 UTC m32r: Fix set_memory() for DISCONTIGMEM In case CONFIG_DISCONTIGMEM is set, the memory size of system was always determined by CONFIG_MEMORY_SIZE and was not changeable. This patch fixes set_memory() of arch/m32r/mm/discontig.c so that we can specify memory size by the "mem=<size>" kernel parameter. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> 04 October 2009, 03:02:36 UTC
bac33bd Hirokazu Takata 26 August 2009, 04:13:12 UTC m32r: add rtc_lock variable Add a spinlock variable "rtc_lock". This is taken from arch/arm/kernel/time.c. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> 04 October 2009, 03:02:36 UTC
d2c5821 Hirokazu Takata 26 August 2009, 04:04:33 UTC m32r: define ioread* and iowrite* macros Define ioread* and iowrite* macros to fix the following build errors: CC [M] drivers/uio/uio_smx.o drivers/uio/uio_smx.c: In function 'smx_handler': drivers/uio/uio_smx.c:31: error: implicit declaration of function 'ioread32' drivers/uio/uio_smx.c:37: error: implicit declaration of function 'iowrite32' Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> 04 October 2009, 03:02:36 UTC
ced0f00 Hirokazu Takata 26 August 2009, 04:09:12 UTC m32r: export delay loop symbols - Move EXPORT_SYMBOL lines of delay loop functions from arch/m32r/kernel/m32r_ksyms.c to arch/m32r/lib/delay.c. - Export __ndelay. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> 04 October 2009, 03:02:36 UTC
2cff5e1 Hirokazu Takata 11 August 2009, 14:12:41 UTC m32r: fix tme_handler Fix pmd_bad check code of tme_handler (TLB Miss Exception handler). The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> 04 October 2009, 03:02:35 UTC
ac481c2 Martin K. Petersen 03 October 2009, 18:52:01 UTC block: Topology ioctls Not all users of the topology information want to use libblkid. Provide the topology information through bdev ioctls. Also clarify sector size comments for existing BLK ioctls. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 03 October 2009, 18:52:01 UTC
f0a221e Linus Torvalds 03 October 2009, 18:25:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits) ALSA: usb - Use strlcat() correctly ALSA: Fix invalid __exit in sound/mips/*.c ALSA: hda - Fix / improve ALC66x parser ALSA: ctxfi: Swapped SURROUND-SIDE mute sound: Make keywest_driver static ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs ASoC: fix kconfig order of Blackfin drivers ALSA: hda - Added quirk to enable sound on Toshiba NB200 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2 ALSA: Don't assume i2c device probing always succeeds ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P ALSA: echoaudio - Re-enable the line-out control for the Mia card ALSA: hda - Resurrect input-source mixer of ALC268 model=acer ALSA: hda - Analog Devices AD1984A add HP Touchsmart model ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist ALSA: hda - CD-audio sound for hda-intel conexant benq laptop ASoC: DaVinci: Correct McASP FIFO initialization ASoC: Davinci: Fix race with cpu_dai->dma_data ASoC: DaVinci: Fix divide by zero error during 1st execution ... 03 October 2009, 18:25:30 UTC
9117703 Linus Torvalds 03 October 2009, 18:24:19 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: [PATCH] ext4: retry failed direct IO allocations ext4: Fix build warning in ext4_dirty_inode() ext4: drop ext4dev compat ext4: fix a BUG_ON crash by checking that page has buffers attached to it 03 October 2009, 18:24:19 UTC
61f0c1d Jens Axboe 03 October 2009, 17:46:03 UTC cfq-iosched: use assigned slice sync value, not default We should use the sysfs modified slice sync value, in case it differs from the default. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 03 October 2009, 17:46:03 UTC
963b72f Jens Axboe 03 October 2009, 17:42:18 UTC cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' Don't think that's necessarily a perfect description of what this option fiddles with, but it's probably better than 'desktop'. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 03 October 2009, 17:42:18 UTC
7fa9742 Takashi Iwai 03 October 2009, 16:31:33 UTC Merge branch 'fix/hda' into for-linus 03 October 2009, 16:31:33 UTC
a1cb9cd Takashi Iwai 03 October 2009, 16:31:22 UTC Merge branch 'fix/asoc' into for-linus 03 October 2009, 16:31:22 UTC
8e29675 Jens Axboe 03 October 2009, 14:26:03 UTC cfq-iosched: implement slower async initiate and queue ramp up This slowly ramps up the async queue depth based on the time passed since the sync IO, and doesn't allow async at all until a sync slice period has passed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 03 October 2009, 14:27:13 UTC
365722b Vivek Goyal 03 October 2009, 13:21:27 UTC cfq-iosched: delay async IO dispatch, if sync IO was just done o Do not allow more than max_dispatch requests from an async queue, if some sync request has finished recently. This is in the hope that sync activity is still going on in the system and we might receive a sync request soon. Most likely from a sync queue which finished a request and we did not enable idling on it. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 03 October 2009, 13:21:27 UTC
c7db7ba Len Brown 03 October 2009, 05:31:37 UTC Merge branch 'misc' into release 03 October 2009, 05:31:37 UTC
3934092 Len Brown 03 October 2009, 05:31:34 UTC Merge branch 'bugzilla-14081' into release 03 October 2009, 05:31:34 UTC
478fa03 Alexey Starikovskiy 02 October 2009, 16:21:40 UTC ACPI: EC: Don't parse DSDT for EC early init on Compal Compal DSDT breaks if scanned early, while we need early scan for almost all ASUS machines. Safest workaround seems to be to continue do an early scan for all machines, but this Compal model. http://bugzilla.kernel.org/show_bug.cgi?id=14086 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 05:23:26 UTC
0adf3c7 Alexey Starikovskiy 02 October 2009, 16:21:33 UTC ACPI: EC: Rewrite DMI checks Use dmi_check_system() for DMI matching. Don't use string "Notebook" for matching MSI hardware. http://bugzilla.kernel.org/show_bug.cgi?id=14081 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 05:20:21 UTC
011a606 Arjan van de Ven 02 October 2009, 14:29:47 UTC SFI: remove __init from sfi_verify_table sfi_verify_table() is called at runtime, and thus cannot be __init Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 05:16:12 UTC
50d716e Alex Chiang 01 October 2009, 17:59:23 UTC ACPI: dock: fix "sibiling" typo Crossword clues as haikus: Snakes from the same brood fighting Jackson on a plane? sibilant siblings I guess Will Shortz's job is still secure. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 05:08:28 UTC
53412c5 Roland Dreier 30 September 2009, 20:58:03 UTC ACPI: kill overly verbose "throttling states" log messages I was recently lucky enough to get a 64-CPU system. The processors actually have T-states, so my kernel log ends up with 64 lines like: ACPI: Processor [CPU0] (supports xx throttling states) This is pretty useless clutter because - this info is already available after boot from /proc/acpi/processor/CPUnn/throttling - there's also an ACPI_DEBUG_PRINT() in processor_throttling.c that gives the same info on boot for anyone who *really* cares. So just delete the code that prints the throttling states in processor_core.c. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 05:06:12 UTC
01674da Rakib Mullick 30 September 2009, 23:09:55 UTC SFI: fix section mismatch warnings in sfi_core.c The function sfi_map_memory/sfi_unmap_memory uses early_ioremap/early_iounmap respectively, which refers to a __init function. And function sfi_check_table also refers to a __init function sfi_verify_table. Since the references are valid, so use __ref to get rid of the warnings. We were warned by the following warnings: LD vmlinux.o MODPOST vmlinux.o WARNING: vmlinux.o(.text+0xb6ba3a): Section mismatch in reference from the function sfi_map_memory() to the function .init.text:early_ioremap() The function sfi_map_memory() references the function __init early_ioremap(). This is often because sfi_map_memory lacks a __init annotation or the annotation of early_ioremap is wrong. WARNING: vmlinux.o(.text+0xb6bab6): Section mismatch in reference from the function sfi_unmap_memory() to the function .init.text:early_iounmap() The function sfi_unmap_memory() references the function __init early_iounmap(). This is often because sfi_unmap_memory lacks a __init annotation or the annotation of early_iounmap is wrong. WARNING: vmlinux.o(.text+0xb6be30): Section mismatch in reference from the function sfi_check_table() to the function .init.text:sfi_verify_table() The function sfi_check_table() references the function __init sfi_verify_table(). This is often because sfi_check_table lacks a __init annotation or the annotation of sfi_verify_table is wrong. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 05:03:11 UTC
d9f6501 Arjan van de Ven 26 September 2009, 18:50:25 UTC ACPI: Fix bound checks for copy_from_user in the acpi /proc code The ACPI /proc write() code takes an unsigned length argument like any write() function, but then assigned it to a *signed* integer called "len". Only after this is a sanity check for len done to make it not larger than 4. Due to the type change a len < 0 is in principle also possible; this patch adds a check for this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 03 October 2009, 04:59:12 UTC
fbbf694 Eric Sandeen 03 October 2009, 01:20:55 UTC [PATCH] ext4: retry failed direct IO allocations On a 256M filesystem, doing this in a loop: xfs_io -F -f -d -c 'pwrite 0 64m' test rm -f test eventually leads to ENOSPC. (the xfs_io command does a 64m direct IO write to the file "test") As with other block allocation callers, it looks like we need to potentially retry the allocations on the initial ENOSPC. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 03 October 2009, 01:20:55 UTC
74072d0 Curt Wohlgemuth 03 October 2009, 01:08:32 UTC ext4: Fix build warning in ext4_dirty_inode() This fixes the following warning: fs/ext4/inode.c: In function 'ext4_dirty_inode': fs/ext4/inode.c:5615: warning: unused variable 'current_handle' We remove the jbd_debug() statement which does use current_handle, as it's not terribly important in the grand scheme of things. Thanks to Stephen Rothwell for pointing this out. Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 03 October 2009, 01:08:32 UTC
a037a79 Linus Torvalds 02 October 2009, 23:20:43 UTC Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() ARM: 5740/1: fix valid_phys_addr_range() range check ARM: 5739/1: ARM: allow empty ATAG_CORE ARM: 5735/1: sa1111: CodingStyle cleanups ARM: 5738/1: Correct TCM documentation ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs ARM: 5733/1: fix bcmring compile error ARM: 5732/1: remove redundant include file ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 ARM: Ensure do_cache_op takes mmap_sem ARM: Fix __cpuexit section mismatch warnings ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast ARM: includecheck fix: mach-davinci, board-dm365-evm.c ARM: Remove unused CONFIG SA1100_H3XXX ARM: Fix warning: unused variable 'highmem' ARM: Fix warning: #warning syscall migrate_pages not implemented ARM: Fix SA11x0 clocksource warning ARM: Fix SA1100 Neponset serial section mismatch ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings ... 02 October 2009, 23:20:43 UTC
d25ef8b Kirill A. Shutemov 25 September 2009, 12:40:49 UTC ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 Currently, on ARMv6 and ARMv7, if an application tries to execute code (or garbage) on non-executable page it hangs. It caused by incorrect prefetch abort handling. Now every prefetch abort processes as a translation fault. To fix this we have to analyze instruction fault status register to figure out reason why we've got the abort and process it accordingly. To make IFSR different from DFSR we set bit 31 which is reserved in both IFSR and DFSR. This patch also tries to protect from future hangs on unexpected exceptions. An application will be killed if unexpected exception type was received. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 October 2009, 21:34:32 UTC
4fb2847 Kirill A. Shutemov 25 September 2009, 12:39:47 UTC ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 October 2009, 21:34:32 UTC
6806bfe Greg Ungerer 01 October 2009, 23:45:28 UTC ARM: 5740/1: fix valid_phys_addr_range() range check Commit 1522ac3ec95ff0230e7aa516f86b674fdf72866c ("Fix virtual to physical translation macro corner cases") breaks the end of memory check in valid_phys_addr_range(). The modified expression results in the apparent /dev/mem size being 2 bytes smaller than what it actually is. This patch reworks the expression to correctly check the address, while maintaining use of a valid address to __pa(). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 October 2009, 21:32:34 UTC
31abdb7 David Brown 01 October 2009, 16:43:29 UTC ARM: 5739/1: ARM: allow empty ATAG_CORE From: David Brown <davidb@quicinc.com> The ATAG_CORE is allowed to be empty. Although this is handled by parse_tag_core(), __vet_atags during startup rejects this tag unless it contains data. Allow the initial tag to be either the full size, or empty. Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 October 2009, 21:32:34 UTC
0a4bc5e Hartley Sweeten 29 September 2009, 22:49:02 UTC ARM: 5735/1: sa1111: CodingStyle cleanups EXPORT_* macros should follow immediately after the closing function brace line. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 October 2009, 21:32:33 UTC
534d0c9 Russell King 02 October 2009, 21:31:04 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop Conflicts: MAINTAINERS 02 October 2009, 21:31:04 UTC
90d5ffc Linus Torvalds 02 October 2009, 20:37:18 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) cnic: Fix NETDEV_UP event processing. uvesafb/connector: Disallow unpliviged users to send netlink packets pohmelfs/connector: Disallow unpliviged users to configure pohmelfs dst/connector: Disallow unpliviged users to configure dst dm/connector: Only process connector packages from privileged processes connector: Removed the destruct_data callback since it is always kfree_skb() connector/dm: Fixed a compilation warning connector: Provide the sender's credentials to the callback connector: Keep the skb in cn_callback_data e1000e/igb/ixgbe: Don't report an error if devices don't support AER net: Fix wrong sizeof net: splice() from tcp to pipe should take into account O_NONBLOCK net: Use sk_mark for routing lookup in more places sky2: irqname based on pci address skge: use unique IRQ name IPv4 TCP fails to send window scale option when window scale is zero net/ipv4/tcp.c: fix min() type mismatch warning Kconfig: STRIP: Remove stale bits of STRIP help text NET: mkiss: Fix typo tg3: Remove prev_vlan_tag from struct tx_ring_info ... 02 October 2009, 20:37:18 UTC
1d22351 Jens Axboe 02 October 2009, 17:27:04 UTC cfq-iosched: add a knob for desktop interactiveness This is basically identical to what Vivek Goyal posted, but combined into one and labelled 'desktop' instead of 'fairness'. The goal is to continue to improve on the latency side of things as it relates to interactiveness, keeping the questionable bits under this sysfs tunable so it would be easy for throughput-only people to turn off. Apart from adding the interactive sysfs knob, it also adds the behavioural change of allowing slice idling even if the hardware does tagged command queuing. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 02 October 2009, 18:06:02 UTC
6053bbf Michael Chan 02 October 2009, 18:03:28 UTC cnic: Fix NETDEV_UP event processing. This fixes the problem of not handling the NETDEV_UP event properly during hot-plug or modprobe of bnx2 after cnic. The handling was skipped by mistakenly using "else if" to check for the event. Also update version to 2.0.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 18:03:28 UTC
cc44578 Philipp Reisner 02 October 2009, 02:40:11 UTC uvesafb/connector: Disallow unpliviged users to send netlink packets Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:18 UTC
98a5783 Philipp Reisner 02 October 2009, 02:40:10 UTC pohmelfs/connector: Disallow unpliviged users to configure pohmelfs Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:15 UTC
5788c56 Philipp Reisner 02 October 2009, 02:40:09 UTC dst/connector: Disallow unpliviged users to configure dst Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:13 UTC
2483647 Philipp Reisner 02 October 2009, 02:40:08 UTC dm/connector: Only process connector packages from privileged processes Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:10 UTC
f1489cf Philipp Reisner 02 October 2009, 02:40:07 UTC connector: Removed the destruct_data callback since it is always kfree_skb() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:05 UTC
18366b0 Philipp Reisner 02 October 2009, 02:40:06 UTC connector/dm: Fixed a compilation warning Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:04 UTC
7069331 Philipp Reisner 02 October 2009, 02:40:05 UTC connector: Provide the sender's credentials to the callback Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:54:01 UTC
293500a Philipp Reisner 02 October 2009, 02:40:04 UTC connector: Keep the skb in cn_callback_data Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:53:58 UTC
19d5afd Frans Pop 02 October 2009, 17:04:12 UTC e1000e/igb/ixgbe: Don't report an error if devices don't support AER The only error returned by pci_{en,dis}able_pcie_error_reporting() is -EIO which simply means that Advanced Error Reporting is not supported. There is no need to report that, so remove the error check from e1000e, igb and ixgbe. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 17:04:12 UTC
b607bd9 Jean Delvare 02 October 2009, 16:55:19 UTC net: Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 16:55:19 UTC
42324c6 Eric Dumazet 01 October 2009, 22:26:00 UTC net: splice() from tcp to pipe should take into account O_NONBLOCK tcp_splice_read() doesnt take into account socket's O_NONBLOCK flag Before this patch : splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE); causes a random endless block (if pipe is full) and splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE | SPLICE_F_NONBLOCK); will return 0 immediately if the TCP buffer is empty. User application has no way to instruct splice() that socket should be in blocking mode but pipe in nonblock more. Many projects cannot use splice(tcp -> pipe) because of this flaw. http://git.samba.org/?p=samba.git;a=history;f=source3/lib/recvfile.c;h=ea0159642137390a0f7e57a123684e6e63e47581;hb=HEAD http://lkml.indiana.edu/hypermail/linux/kernel/0807.2/0687.html Linus introduced SPLICE_F_NONBLOCK in commit 29e350944fdc2dfca102500790d8ad6d6ff4f69d (splice: add SPLICE_F_NONBLOCK flag ) It doesn't make the splice itself necessarily nonblocking (because the actual file descriptors that are spliced from/to may block unless they have the O_NONBLOCK flag set), but it makes the splice pipe operations nonblocking. Linus intention was clear : let SPLICE_F_NONBLOCK control the splice pipe mode only This patch instruct tcp_splice_read() to use the underlying file O_NONBLOCK flag, as other socket operations do. Users will then call : splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE | SPLICE_F_NONBLOCK ); to block on data coming from socket (if file is in blocking mode), and not block on pipe output (to avoid deadlock) First version of this patch was submitted by Octavian Purdila Reported-by: Volker Lendecke <vl@samba.org> Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2009, 16:46:05 UTC
6effe5f Len Brown 02 October 2009, 15:27:57 UTC Merge branches 'sony-laptop', 'bugzilla-14247' and 'bugzilla-14271' into release 02 October 2009, 15:27:57 UTC
a83893a Bjorn Helgaas 02 October 2009, 15:03:12 UTC ACPI: fix bus scanning memory leaks Free an acpi_get_object_info() buffer when we're finished. Skip the acpi_get_name() altogether -- it was only used for a printk that was really just for debug anyway. http://bugzilla.kernel.org/show_bug.cgi?id=14271 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reported-and-tested-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> 02 October 2009, 15:03:12 UTC
e12ac3d Alexey Starikovskiy 01 October 2009, 22:53:15 UTC ACPI: EC: Restart command even if no interrupts from EC EC may forget a command without sending any "reset" interrupt, thus we need to lessen the requirement for transaction restart. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14247 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> 02 October 2009, 14:00:31 UTC
08d1e63 Takashi Iwai 02 October 2009, 12:06:08 UTC ALSA: usb - Use strlcat() correctly Don't pass the advanced position to strlcat() but just gives the buffer head position so that the max size limit can be checked correctly. Introduced a new helper function to standaralize strlcat() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 October 2009, 12:06:08 UTC
2f229a3 Takashi Iwai 02 October 2009, 09:04:54 UTC ALSA: Fix invalid __exit in sound/mips/*.c The remove callback has to be marked as __devexit, as the dynamic unbind is possible. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 October 2009, 09:06:16 UTC
7085ec1 Takashi Iwai 02 October 2009, 07:03:58 UTC ALSA: hda - Fix / improve ALC66x parser The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 October 2009, 07:03:58 UTC
3b04691 Sven Eckelmann 01 October 2009, 18:06:39 UTC ALSA: ctxfi: Swapped SURROUND-SIDE mute On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute functions are swapped. It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or 'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not to be affected and works as expected. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 October 2009, 05:45:55 UTC
a656cbf Jean Delvare 01 October 2009, 16:08:18 UTC sound: Make keywest_driver static I can't see any reason for struct i2c_driver keywest_driver to not be static. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 October 2009, 05:38:37 UTC
ebb6f6a Daniel T Chen 01 October 2009, 22:56:30 UTC ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP BugLink: https://bugs.launchpad.net/bugs/410933 This Sony VAIO model also needs External Amplifier unmuted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 October 2009, 05:35:26 UTC
0efe5e3 Linus Torvalds 02 October 2009, 03:23:15 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix data space leak fix Btrfs: remove duplicates of filemap_ helpers Btrfs: take i_mutex before generic_write_checks Btrfs: fix arguments to btrfs_wait_on_page_writeback_range Btrfs: fix deadlock with free space handling and user transactions Btrfs: fix error cases for ioctl transactions Btrfs: Use CONFIG_BTRFS_POSIX_ACL to enable ACL code Btrfs: introduce missing kfree Btrfs: Fix setting umask when POSIX ACLs are not enabled Btrfs: proper -ENOSPC handling 02 October 2009, 03:23:15 UTC
e6a0a8b Uwe Kleine-König 01 October 2009, 22:44:33 UTC spi-imx: strip down chipselect function to only drive the chipselect spi_imx_chipselect() made things that should be (and mostly are) done by spi_imx_setupxfer. Only setting the tx and rx functions was missing. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:17 UTC
d1c627b Uwe Kleine-König 01 October 2009, 22:44:32 UTC spi-imx: initialize complete config struct Otherwise the config function uses random data from the stack. This didn't stick out because config is called once more in the chipselect function with correct parameters. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:17 UTC
4388eb1 Uwe Kleine-König 01 October 2009, 22:44:31 UTC spi-imx: no need to assert bits_per_word being initialized spi_imx_setup() is only called by spi_setup(). The latter does the initialization already. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
3910f2c Sascha Hauer 01 October 2009, 22:44:30 UTC spi-imx: setup mode_bits we can handle Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
6c23e5d Sascha Hauer 01 October 2009, 22:44:29 UTC spi-imx: fix initial chipselect settings We can only setup the gpio pins in spi_setup time when we know the SPI_CS_HIGH setting. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
462d26b Sascha Hauer 01 October 2009, 22:44:29 UTC spi-imx: update state correctly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
6cdeb00 Uwe Kleine-König 01 October 2009, 22:44:28 UTC spi-imx: rename source file to spi_imx.c This makes the filename match the Kconfig symbol and the driver name. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
80e50be Christoph Hellwig 01 October 2009, 22:44:27 UTC afs: remove cache.h It's just a wrapper for <linux/fscache.h>, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
8fccae2 Andy Spencer 01 October 2009, 22:44:27 UTC sscanf(): fix %*s%n When using %*s, sscanf should honor conversion specifiers immediately following the %*s. For example, the following code should find the position of the end of the string "hello". int end; char buf[] = "hello world"; sscanf(buf, "%*s%n", &end); printf("%d\n", end); Ideally, sscanf would advance the fmt and str pointers the same as it would without the *, but the code for that is rather complicated and is not included in the patch. Signed-off-by: Andy Spencer <andy753421@gmail.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
d41a4b5 Chuck Ebbert 01 October 2009, 22:44:26 UTC serial: add parameter to force skipping the test for the TXEN bug Allow users to force skipping the TXEN test at init time. Applies to all serial ports. Intended for debugging only. There is a blacklist for devices where we need to skip the test but the list is not complete. This lets users force skipping the test so we can determine if they need to be added to the list. Some HP machines with weird serial consoles have this problem and there may be more. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
f23fc15 Roel Kluin 01 October 2009, 22:44:25 UTC serial167: fix read buffer overflow Check whether index is within bounds before grabbing the element. Also, since NR_PORTS is defined ARRAY_SIZE(cy_port), cy_port[NR_PORTS] is out of bounds as well. [akpm@linux-foundation.org: cleanup, remove (long) casts] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
196b316 Roel Kluin 01 October 2009, 22:44:24 UTC cyclades: fix read buffer overflow irq is declared with size NR_CARDS (4), but the loop containing this segment runs up until NR_ISA_ADDRS (16), possibly reading from irq[i] (and trying to use the result) Identified by the Parfait static scanner. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:16 UTC
75e3a6a Breno Leitao 01 October 2009, 22:44:23 UTC icom: convert space to tabs Convert spaces to tabs and remove wrong spaces Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <Scott.Kilau@digi.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
aa76224 Atsushi Nemoto 01 October 2009, 22:44:22 UTC serial_txx9: use container_of() instead of direct cast Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
00acfae Ben Dooks 01 October 2009, 22:44:21 UTC s3cmci: add better support for no card detect or write protect available Add better support for omitting either the card detect or the write protect GPIOs if the board does not support it. Add the fields no_wprotect and no_detect to the platform data which when set indicate the absence of the respective GPIOs. Note, this also fixes a minor bug where it tries to free IRQ0 if there is no detect gpio available. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
5a2c4fe Ben Dooks 01 October 2009, 22:44:20 UTC s3cmci: make SDIO IRQ hardware IRQ support build-time configurable We have found a couple of boards where the SDIO IRQ hardware support has failed to work properly, and thus we should make it configurable whether or not to be included in the driver. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
68c5ed5 Ben Dooks 01 October 2009, 22:44:19 UTC s3cmci: DMA fixes Fixes for the DMA transfer mode of the driver to try and improve the state of the code: - Ensure that dma_complete is set during the end of the command phase so that transfers do not stall awaiting the completion - Update the DMA debugging to provide a bit more useful information such as how many DMA descriptors where not processed and print the DMA addresses in hexadecimal. - Fix the DMA channel request code to actually request DMA for the S3CMCI block instead of whatever '0' signified. - Add fallback to PIO if we cannot get the DMA channel, as many of the devices with this block only have a limited number of DMA channels. - Only try and claim and free the DMA channel if we are trying to use it. This improves the driver DMA code to the point where it can now identify a card and read the partition table. However the DMA can still stall when trying to move data between the host and memory. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
26f1494 Ben Dooks 01 October 2009, 22:44:18 UTC s3cmci: Kconfig selection for PIO/DMA/Both Add a selection for the data transfer mode of the s3cmci driver, allowing for either a configuration or rumtime selection of the use of the DMA or PIO transfer code. The PIO only mode is 476 bytes smaller than the driver with both methods compiled in. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
c225889 Ben Dooks 01 October 2009, 22:44:18 UTC s3cmci: add SDIO IRQ support The controller supports SDIO IRQ detection so add support for hardware assisted SDIO interrupt detection for the SDIO core. This improves the response time for SDIO interrupts and thus the transfer rate from devices such as the Marvel 8686. As a note, it does seem that the controller will miss an IRQ than is held asserted, so there are some manual checks to see if the SDIO interrupt is active after a transfer. Major testing on the S3C2440. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
9bdd203 Ben Dooks 01 October 2009, 22:44:17 UTC s3cmci: add debugfs support for examining driver and hardware state Export driver state and hardware register state via debugfs entries created under a directory formed from dev_name() on the probed device when CONFIG_DEBUG_FS is set. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
e6130ae Ben Dooks 01 October 2009, 22:44:16 UTC s3cmci: fix direct write to interrupt mask The clear_imask() call should be used to clear the interrupt mask register, as it may end up clearing the SDIO interrupt bit if this is enabled. Change all writes of zero to SDIIMSK register to use clear_imask() ready for the SDIO updates. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
50d7fa9 Ben Dooks 01 October 2009, 22:44:15 UTC s3cmci: change to use dev_pm_ops Move to using dev_pm_ops for suspend and resume. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 October 2009, 23:11:15 UTC
back to top