Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
7284ce6 Linus Torvalds 13 January 2010, 05:15:00 UTC Linux 2.6.33-rc4 13 January 2010, 05:15:00 UTC
53ff709 Linus Torvalds 13 January 2010, 05:13:06 UTC Merge git://git.infradead.org/battery-2.6 * git://git.infradead.org/battery-2.6: pmu_battery: Fix battery full reporting 13 January 2010, 05:13:06 UTC
bb7d3f2 Bryn M. Reeves 12 November 2009, 18:31:54 UTC [SCSI] megaraid_sas: remove sysfs poll_mode_io world writeable permissions /sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being world-writable, which seems bad (letting any user affect kernel driver behavior). This turns off group and user write permissions, so that on typical production systems only root can write to it. Signed-off-by: Bryn M. Reeves <bmr@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 January 2010, 05:12:36 UTC
90aeb7c Linus Torvalds 13 January 2010, 05:04:04 UTC Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded OMAP: DSS2: Reject scaling settings when they cannot be supported OMAP: DSS2: Make check-delay-loops consistent OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem() video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.c OMAP: DSS2: Fix compile warning MAINTAINERS: Combine DSS2 and OMAPFB2 into one entry MAINTAINERS: change omapfb maintainer OMAP: OMAPFB: add dummy release function for omapdss OMAP: OMAPFB: fix clk_get for RFBI OMAP: DSS2: RFBI: convert to new kfifo API OMAP: DSS2: Fix crash when panel doesn't define enable_te() OMAP: DSS2: Collect interrupt statistics OMAP: DSS2: DSI: print debug DCS cmd in hex OMAP: DSS2: DSI: fix VC channels in send_short and send_null 13 January 2010, 05:04:04 UTC
2c76127 Dave Chinner 12 January 2010, 06:39:16 UTC lib: Introduce generic list_sort function There are two copies of list_sort() in the tree already, one in the DRM code, another in ubifs. Now XFS needs this as well. Create a generic list_sort() function from the ubifs version and convert existing users to it so we don't end up with yet another copy in the tree. Signed-off-by: Dave Chinner <david@fromorbit.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 January 2010, 05:02:00 UTC
dbf004d Dave Jones 12 January 2010, 21:59:52 UTC remove my email address from checkpatch. Maybe this will stop people emailing me about it. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 January 2010, 04:56:52 UTC
2d13c8f Linus Torvalds 13 January 2010, 04:56:20 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: retry link resume if necessary ata_piix: enable 32bit PIO on SATA piix sata_promise: don't classify overruns as HSM errors 13 January 2010, 04:56:20 UTC
1f0e14b Linus Torvalds 13 January 2010, 04:56:01 UTC Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options ARM: Fix wrong dmb ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code" ARM: 5867/1: Update U300 defconfig ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs [ARM] pxa: fix strange characters in zaurus gpio .desc ARM: add missing recvmmsg syscall number [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*() [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *' [ARM] pxa: enable L2 if present in XSC3 [ARM] pxa: do not enable L2 after MMU is enabled 13 January 2010, 04:56:01 UTC
f25bb39 Linus Torvalds 13 January 2010, 04:55:31 UTC Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits) MIPS: Ignore vmlinux.* MIPS: Move vmlinux.ecoff to arch/mips/boot MIPS: cpumask_of_node() should handle -1 as a node MIPS: Octeon: Use non-overflowing arithmetic in sched_clock MIPS: Malta, PowerTV: Remove unnecessary "Linux started" MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE. MIPS: AR7: Remove unused prom_getchar() MIPS: PowerTV: Remove extra r4k_clockevent_init() call MIPS: Cobalt use strlcat() for the command line arguments MIPS: Octeon: Add sched_clock() to csrc-octeon.c MIPS: TXx9: Cleanup builtin-cmdline processing MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init() MIPS: PowerTV: Remove unused platform_die() MIPS: PowerTV: Remove mips_machine_halt() MIPS: PowerTV: Remove unused ptv_memsize MIPS: PowerTV: Remove unused prom_getcmdline() MIPS: AR7: Remove kgdb_enabled MIPS: Alchemy: Correct code taking the size of a pointer MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c MIPS: VR41xx: Use strlcat() for the command line arguments ... 13 January 2010, 04:55:31 UTC
7113578 Linus Torvalds 13 January 2010, 04:54:52 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix ALC861-VD capture source mixer ALSA: ac97: add AC97 STMicroelectronics' codecs ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist ASoC: Fix WM8350 DSP mode B configuration sbawe: fix memory detection part 2 sound: oss: off by one bug ALSA: usb-audio - Avoid Oops after disconnect ALSA: test off by one in setsamplerate() ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2 13 January 2010, 04:54:52 UTC
597d8c7 Linus Torvalds 13 January 2010, 04:53:29 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) sky2: Fix oops in sky2_xmit_frame() after TX timeout Documentation/3c509: document ethtool support af_packet: Don't use skb after dev_queue_xmit() vxge: use pci_dma_mapping_error to test return value netfilter: ebtables: enforce CAP_NET_ADMIN e1000e: fix and commonize code for setting the receive address registers e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value e1000e: perform 10/100 adaptive IFS only on parts that support it e1000e: don't accumulate PHY statistics on PHY read failure e1000e: call pci_save_state() after pci_restore_state() netxen: update version to 4.0.72 netxen: fix set mac addr netxen: fix smatch warning netxen: fix tx ring memory leak tcp: update the netstamp_needed counter when cloning sockets TI DaVinci EMAC: Handle emac module clock correctly. dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips ixgbe: Fix compiler warning about variable being used uninitialized netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq() mv643xx_eth: don't include cache padding in rx desc buffer size ... Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c 13 January 2010, 04:53:29 UTC
682137f Greg Ungerer 13 January 2010, 00:42:05 UTC m68knommu: fix definitions of __pa() and __va() Fix compilation breakage of all m68knommu targets: CC arch/m68knommu/kernel/asm-offsets.s In file included from include/linux/sched.h:77, from arch/m68knommu/kernel/asm-offsets.c:12: include/linux/percpu.h: In function 'per_cpu_ptr_to_phys': include/linux/percpu.h:161: error: implicit declaration of function 'virt_to_phy This is broken in linux-2.6.33-rc3. Change the definitions of __pa() and __va() to not use virt_to_phys() and phys_to_virt(). Trivial 1:1 conversion required for the non-MMU case. A side effect if this is that the m68knommu can now use asm/virtconvert.h for the definition of virt_to_phys() and phys_to_virt(). Also cleaned up the definition of page_to_phys() when moving into virtconvert.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 January 2010, 04:51:45 UTC
5040ab6 Tejun Heo 11 January 2010, 02:14:44 UTC libata: retry link resume if necessary Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fengxiangjun <fengxiangjun@neusoft.com> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 12 January 2010, 19:34:14 UTC
0b67c74 Tejun Heo 11 January 2010, 08:03:11 UTC ata_piix: enable 32bit PIO on SATA piix Commit 871af1210f13966ab911ed2166e4ab2ce775b99d enabled 32bit PIO for PATA piix but didn't for SATA. There's no reason not to use 32bit PIO on SATA piix. Enable it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 12 January 2010, 19:33:23 UTC
a2342f4 Mikael Pettersson 09 January 2010, 22:32:06 UTC sata_promise: don't classify overruns as HSM errors When sata_promise encounters an overrun or underrun error it translates that to a libata AC_ERR_HSM, causing a hard reset. Since over/under-runs were thought to be rare and transient, this action seemed reasonable. Unfortunately it turns out that the controller throws overrun errors when e.g. hal polls a CD or DVD writer containing blank media, causing long sequences of hard resets and retries before EH finally gives up. This patch updates sata_promise to classify over/under-runs as AC_ERR_OTHER instead. This allows libata EH and upper layers to retry or fail the operation as they see fit without the disruption caused by repeated hard resets. This fixes a problem using a DVD-RAM drive with sata_promise, reported by Thomas Schorpp. I also tested it on a DVD-RW drive. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: thomas schorpp <thomas.schorpp@googlemail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 12 January 2010, 19:33:07 UTC
aff7b4f Russell King 12 January 2010, 19:02:05 UTC ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 12 January 2010, 19:02:05 UTC
7511bce Russell King 12 January 2010, 18:59:16 UTC ARM: Fix wrong dmb The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 12 January 2010, 18:59:16 UTC
9a3065c Yoichi Yuasa 18 December 2009, 12:14:19 UTC MIPS: Ignore vmlinux.* Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:38 UTC
17f964e Yoichi Yuasa 18 December 2009, 12:13:17 UTC MIPS: Move vmlinux.ecoff to arch/mips/boot It moves to the same directory as the boot files in other formats. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/796/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:38 UTC
d797396 Anton Blanchard 06 January 2010, 04:55:13 UTC MIPS: cpumask_of_node() should handle -1 as a node pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Patchwork: http://patchwork.linux-mips.org/patch/831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:37 UTC
0e8a1d8 David Daney 08 January 2010, 22:47:36 UTC MIPS: Octeon: Use non-overflowing arithmetic in sched_clock With typical mult and shift values, the calculation for Octeon's sched_clock overflows when using 64-bit arithmetic. Use 128-bit calculations instead. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/849/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:36 UTC
9b54dc5 Yoichi Yuasa 03 January 2010, 05:47:34 UTC MIPS: Malta, PowerTV: Remove unnecessary "Linux started" Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/813/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:36 UTC
0622870 Yoichi Yuasa 03 January 2010, 05:39:11 UTC MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE. Builtin cmdline is copied by arch_mem_init(). Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:36 UTC
70b5c81 Yoichi Yuasa 03 January 2010, 05:13:04 UTC MIPS: AR7: Remove unused prom_getchar() Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:36 UTC
1dc2386 David VomLehn 22 December 2009, 01:43:42 UTC MIPS: PowerTV: Remove extra r4k_clockevent_init() call A call to r4k_clocksource_init() was added to plat_time_init(), but when init_mips_clock_source() calls the same function, boot fails in clockevents_register_device(). This patch removes the extraneous call. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Patchwork: http://patchwork.linux-mips.org/patch/803/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:35 UTC
0833c76 Yoichi Yuasa 24 December 2009, 08:06:34 UTC MIPS: Cobalt use strlcat() for the command line arguments Tested with CoLo v1.22 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/807/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:34 UTC
c6a3c85 David Daney 23 December 2009, 21:18:54 UTC MIPS: Octeon: Add sched_clock() to csrc-octeon.c With the advent of function graph tracing on MIPS, Octeon needs a high precision sched_clock() implementation. Without it, most timing numbers are reported as 0.000. This new sched_clock just uses the 64-bit cycle counter appropriately scaled. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/805/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:34 UTC
98bea6f Atsushi Nemoto 21 December 2009, 15:48:57 UTC MIPS: TXx9: Cleanup builtin-cmdline processing Since commit 898d357b5262f9e26bc2418e01f8676e80d9867e (lmo) / 6acc7d485c24c00e111c61b2e6dff9180faebcae (kernel.org) ("Fix and enhance built-in kernel command line") arcs_cmdline[] does not contain built-in command line. The commit introduce CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE to control built-in command line, and now we can use them instead of platform-specific built-in command line processing. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Patchwork: http://patchwork.linux-mips.org/patch/802/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:34 UTC
7e326d6 Yoichi Yuasa 18 December 2009, 12:38:37 UTC MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init() Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/801/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:33 UTC
0eb99a9 Yoichi Yuasa 18 December 2009, 12:36:32 UTC MIPS: PowerTV: Remove unused platform_die() Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/800/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:33 UTC
2620c35 Yoichi Yuasa 18 December 2009, 12:33:46 UTC MIPS: PowerTV: Remove mips_machine_halt() mips_machine_halt() is same as mips_machine_restart(). Also delete the registration of _machine_halt and pm_power_off because mips_machine_halt() is the restart function. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/798/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:32 UTC
09b7c9f Yoichi Yuasa 18 December 2009, 12:30:18 UTC MIPS: PowerTV: Remove unused ptv_memsize Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/799/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:32 UTC
99d2b17 Yoichi Yuasa 18 December 2009, 12:29:17 UTC MIPS: PowerTV: Remove unused prom_getcmdline() Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/797/ Reviewed-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:31 UTC
5769940 Yoichi Yuasa 18 December 2009, 12:20:24 UTC MIPS: AR7: Remove kgdb_enabled An unused leftover from the old KGDB implementation. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/794/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:31 UTC
42ecda1 Julia Lawall 13 December 2009, 11:40:39 UTC MIPS: Alchemy: Correct code taking the size of a pointer sizeof(dp) is just the size of the pointer. Change it to the size of the referenced structure. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Patchwork: http://patchwork.linux-mips.org/patch/789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:31 UTC
05c6946 Florian Fainelli 12 December 2009, 16:57:39 UTC MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:30 UTC
66a0f0f Yoichi Yuasa 10 December 2009, 05:00:39 UTC MIPS: VR41xx: Use strlcat() for the command line arguments Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/784/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:30 UTC
d4d9a55 Wu Zhangjin 10 December 2009, 14:55:13 UTC MIPS: Cleanup and Fixup of compressed kernel support o Remove the .initrd section. The initrd section was already handled when vmlinux was linked. o Discard .MIPS.options, .options, .pdr, .reginfo, .comment and .note sections. If .MIPS.options is not removed, kernels compiled with gcc 3.4.6 will not boot. o Clean up the file format. o Remove several other unneeded sections. Tested with GCC 3.4.6 and 4.4.1 with and without initrd. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/785/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:29 UTC
abbdc3d David Daney 04 December 2009, 01:43:54 UTC MIPS: Cleanup forgotten label_module_alloc in tlbex.c commit c8af165342e83a4eb078c9607d29a7c399d30a53 (lmo) rsp. e0cc87f59490d7d62a8ab2a76498dc8a2b64927a (kernel.org) left label_module_alloc unused. Remove it now. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 12 January 2010, 17:19:29 UTC
f59bb4b Takashi Iwai 12 January 2010, 16:50:06 UTC Merge branch 'fix/asoc' into for-linus 12 January 2010, 16:50:06 UTC
c96350a Takashi Iwai 12 January 2010, 16:50:03 UTC Merge branch 'fix/hda' into for-linus 12 January 2010, 16:50:03 UTC
9c0afc8 Takashi Iwai 12 January 2010, 13:00:11 UTC ALSA: hda - Fix ALC861-VD capture source mixer The capture source or input source mixer element wasn't created properly for ALC861-VD codec due to the wrong NID passed to alc_auto_create_input_ctls(). References: Novell bnc#568305 http://bugzilla.novell.com/show_bug.cgi?id=568305 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org> 12 January 2010, 13:02:13 UTC
9db2f1b Jarek Poplawski 04 January 2010, 08:48:41 UTC sky2: Fix oops in sky2_xmit_frame() after TX timeout During TX timeout procedure dev could be awoken too early, e.g. by sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame() can run while buffers are freed causing an oops. This patch fixes it by adding netif_device_present() test in sky2_tx_complete(). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925 With debugging by: Mike McCormack <mikem@ring3k.org> Reported-by: Berck E. Nash <flyboy@gmail.com> Tested-by: Berck E. Nash <flyboy@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 January 2010, 10:55:24 UTC
807a751 Tomi Valkeinen 07 January 2010, 15:45:03 UTC OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded If the panel's probe had failed, omapfb would still go on, eventually crashing. A better fix would be to handle each display properly, and leaving just the failed display out. But that is a bigger change. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> 12 January 2010, 10:10:55 UTC
2d9c559 Ville Syrjälä 08 January 2010, 09:56:41 UTC OMAP: DSS2: Reject scaling settings when they cannot be supported If the scaling ratio is below 0.5 video output width can't be identical to the display width. Reject such settings. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> 12 January 2010, 10:10:19 UTC
dba9532 Takashi Iwai 12 January 2010, 08:40:48 UTC Merge remote branch 'alsa/fixes' into fix/misc 12 January 2010, 08:40:48 UTC
066000d Ananth N Mavinakayanahalli 11 January 2010, 23:51:04 UTC Revert "x86, apic: Use logical flat on intel with <= 8 logical cpus" Revert commit 2fbd07a5f5d1295fa9b0c0564ec27da7c276a75a, as this commit breaks an IBM platform with quad-core Xeon cpu's. According to Suresh, this might be an IBM platform issue, as on other Intel platforms with <= 8 logical cpu's, logical flat mode works fine irespective of physical apic id values (inline with the xapic architecture). Revert this for now because of the IBM platform breakage. Another version will be re-submitted after the complete analysis. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 January 2010, 00:47:57 UTC
aa4e2e1 Ben Hutchings 11 January 2010, 23:53:45 UTC Documentation/3c509: document ethtool support 3c509 was changed to support ethtool in 2002, making the 'xcvr' module parameter obsolete in most cases. More recently 3c509 was converted to the modern driver model and this parameter was removed. Fix the documentation to refer to ethtool rather than the module parameter. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 11 January 2010, 23:53:45 UTC
eb70df1 Jarek Poplawski 10 January 2010, 22:04:19 UTC af_packet: Don't use skb after dev_queue_xmit() tpacket_snd() can change and kfree an skb after dev_queue_xmit(), which is illegal. With debugging by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Michael Breuer <mbreuer@majjas.com> With help from: David S. Miller <davem@davemloft.net> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Michael Breuer<mbreuer@majjas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 January 2010, 23:39:42 UTC
1b4d40a Linus Torvalds 11 January 2010, 17:48:48 UTC Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Ensure we force all busy extents in range to disk xfs: Don't flush stale inodes xfs: fix timestamp handling in xfs_setattr xfs: use DECLARE_EVENT_CLASS 11 January 2010, 17:48:48 UTC
79ecb04 Linus Torvalds 11 January 2010, 17:48:29 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Use MAX_LFS_FILESIZE for meta inode size GFS2: Fix gfs2_xattr_acl_chmod() GFS2: Fix locking bug in rename GFS2: Ensure uptodate inode size when using O_APPEND 11 January 2010, 17:48:29 UTC
db1fc95 Linus Torvalds 11 January 2010, 17:48:14 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix dquot_transfer for filesystems different from ext4 11 January 2010, 17:48:14 UTC
00fdb75 Linus Torvalds 11 January 2010, 17:47:52 UTC Merge branch 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/hp: fail gracefully if we don't find an IOC agp/hp: fixup hp agp after ACPI changes agp: correct missing cleanup on error in agp_add_bridge 11 January 2010, 17:47:52 UTC
c07d723 Linus Torvalds 11 January 2010, 17:46:20 UTC Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (45 commits) drm/nv04: Fix set_operation software method. drm/nouveau: initialise DMA tracking parameters earlier drm/nouveau: use dma.max rather than pushbuf size for checking GET validity drm/nv04: differentiate between nv04/nv05 drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence drm/nv50: prevent a possible ctxprog hang drm/nouveau: have ttm's fault handler called directly drm/nv50: restore correct cache1 get/put address on fifoctx load drm/nouveau: create function for "dealing" with gpu lockup drm/nouveau: remove unused nouveau_channel_idle() function drm/nouveau: fix handling of fbcon colours in 8bpp drm/nv04: Context switching fixes. drm/nouveau: Use the software object for fencing. drm/nouveau: Allocate a per-channel instance of NV_SW. drm/nv50: make the blocksize depend on vram size drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN drm/nouveau: Don't skip card take down on nv0x. drm/nouveau: Implement nv42-nv43 TV load detection. drm/nouveau: Clean up the nv17-nv4x load detection code a bit. drm/nv50: fix fillrect color ... 11 January 2010, 17:46:20 UTC
6102c31 Linus Torvalds 11 January 2010, 17:45:55 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Make PCI device ids constant hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs hwmon: (k10temp) Blacklist more family 10h processors hwmon: (asus_atk0110) Add debugfs interface hwmon: (asus_atk0110) Refactor interface probe code hwmon: (adt7462) Fix pin 28 monitoring 11 January 2010, 17:45:55 UTC
a29815a Avi Kivity 10 January 2010, 14:28:09 UTC core, x86: make LIST_POISON less deadly The list macros use LIST_POISON1 and LIST_POISON2 as undereferencable pointers in order to trap erronous use of freed list_heads. Unfortunately userspace can arrange for those pointers to actually be dereferencable, potentially turning an oops to an expolit. To avoid this allow architectures (currently x86_64 only) to override the default values for these pointers with truly-undereferencable values. This is easy on x86_64 as the virtual address space is large and contains areas that cannot be mapped. Other 64-bit architectures will likely find similar unmapped ranges. [ingo: switch to 0xdead000000000000 as the unmapped area] [ingo: add comments, cleanup] [jaswinder: eliminate sparse warnings] Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:45:37 UTC
c0f607c Linus Torvalds 11 January 2010, 17:44:19 UTC Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (26 commits) OMAP2 clock: dynamically allocate CPUFreq frequency table OMAP clock/CPUFreq: add clk_exit_cpufreq_table() OMAP2xxx OPP: clean up comments in OPP data OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled OMAP1 clock: remove __initdata from struct clk_functions to prevent crash OMAP1 clock: Add missing clocks for OMAP 7xx OMAP clock: remove incorrect EXPORT_SYMBOL()s OMAP3 clock: Add capability to change rate of dpll4_m5_ck OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK OMAP3: clock: add clockdomains for UART1 & 2 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space OMAP2xxx IO mapping: mark DSP mappings as being 2420-only ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. OMAP2: remove duplicated #include omap3: EVM: Choose OMAP_PACKAGE_CBB omap3: Fix booting if package is uninitialized omap3: add missing parentheses omap3: add missing parentheses omap2/3: ZOOM: Correcting key mapping for few keys omap2/3: make serial_in_override() address the right uart port ... 11 January 2010, 17:44:19 UTC
598cace David Howells 08 January 2010, 22:43:21 UTC mn10300: update the ASB2303 defconfig Update the defconfig for the ASB2303 platform. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
012c79b David Howells 08 January 2010, 22:43:21 UTC mn10300: make the ASB2305's PCnet32 NIC work by using the PCI bridge's SRAM Access to the ASB2305's PCnet32 NIC doesn't work correctly because when the NIC attempts to update the ring buffer flags by DMA, the change to RAM crops up about 17uS after the interrupt line is asserted. This is almost certainly due to a bug in the PCI bridge FPGA on that board. We can get around this by making dma_alloc_coherent() put the ring buffer in the SRAM attached to the PCI bridge rather than in the SDRAM. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
112b4a0 David Howells 08 January 2010, 22:43:20 UTC mn10300: insert PCI root bus resources for the ASB2305 devel motherboard Insert PCI root bus resources for the MN10300-based ASB2305 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. We also add a reservation for the PCI SRAM region. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
126cda5 Bjorn Helgaas 08 January 2010, 22:43:19 UTC mn10300: use generic pci_enable_resources() Use the generic pci_enable_resources() instead of the arch-specific code. Unlike this arch-specific code, the generic version: - checks PCI_NUM_RESOURCES (11), not 6, resources - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set - skips ROM resources unless IORESOURCE_ROM_ENABLE is set - checks for resource collisions with "!r->parent" Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
e716381 David Howells 08 January 2010, 22:43:18 UTC mn10300: use KERN_ERR not KERN_ERROR Use KERN_ERR not KERN_ERROR in the ASB2305 platform code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
07c706a Al Viro 08 January 2010, 22:43:17 UTC mn10300: fix several bogus includes on abs2305 asm/cpu never existed for mn10300; the files they are looking for are in asm. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
e5d20d0 David Howells 08 January 2010, 22:43:17 UTC mn10300: wire up missing new syscalls Wire up missing new system calls for MN10300. Signed-off-by: David Howells <dhowelsl@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
d6bb7a1 Mark Salter 08 January 2010, 22:43:16 UTC mn10300: add cc clobbers to asm statements gcc 4.2.1 for MN10300 is more agressive than the older gcc in reordering/moving other insns between an insn that sets flags and an insn that uses those flags. This leads to trouble with asm statements which are missing an explicit "cc" clobber. This patch adds the explicit "cc" clobber to asm statements which do indeed clobber the condition flags. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:10 UTC
b0641e8 Mark Salter 08 January 2010, 22:43:15 UTC mn10300: objcopy flags fix The gcc-4.2.1 based toolchain for MN10300 adds some new note sections which need to be stripped from the binary image. This patch takes care of that. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:09 UTC
4c03ee7 Mark Salter 08 January 2010, 22:43:14 UTC mn10300: signal stack fix This fixes a signal stack handling problem in the MN10300 arch. When new threads are cloned with CLONE_VM, they don't inherit the alternate signal stack. They do share the signal flags, though. When deciding whether to use an alternate stack, the arch code needs to check to make sure the task struct contains a valid alternate stack. This patch fixes the MN10300 arch by using the sas_ss_flags() test provided by sched.h rather than the on_sig_stack() test which is insufficient by itself. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
004731b OGAWA Hirofumi 08 January 2010, 22:43:11 UTC rtc_cmos: convert shutdown to new pnp_driver->shutdown commit abd6633c67925f90775bb74755f9c547e30f1f20 ("pnp: add a shutdown method to pnp drivers") adds shutdown method to bus driver blindly. With it, driver->shutdown is no longer valid. Use pnp_driver->shutdown instead. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14889 Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: Malte Schröder <maltesch@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: David Hardeman <david@hardeman.nu> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: <stable@kernel.org> [2.6.32.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
7f53a09 Minchan Kim 08 January 2010, 22:43:10 UTC smaps: fix wrong rss count A long time ago we regarded zero page as file_rss and vm_normal_page doesn't return NULL. But now, we reinstated ZERO_PAGE and vm_normal_page's implementation can return NULL in case of zero page. Also we don't count it with file_rss any more. Then, RSS and PSS can't be matched. For consistency, Let's ignore zero page in smaps_pte_range. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Matt Mackall <mpm@selenic.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
d2b34e2 Randy Dunlap 08 January 2010, 22:43:09 UTC documentation: update kernel-doc-nano-HOWTO information Remove comments about function short descriptions not allowed to be on multiple lines (that was fixed/changed recently). Add comments that function "section header:" names need to be unique per function/struct/union/typedef/enum. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
8088409 Michael Hennerich 08 January 2010, 22:43:08 UTC gpio: adp5588-gpio: new driver for ADP5588 GPIO expanders Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
5787536 Stephen Hemminger 08 January 2010, 22:43:08 UTC drivers/cpuidle/governors/menu.c: fix undefined reference to `__udivdi3' menu: use proper 64 bit math The new menu governor is incorrectly doing a 64 bit divide. Compile tested only Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
006b429 Randy Dunlap 08 January 2010, 22:43:07 UTC Documentation: update ring-buffer-design.txt Fix typos, grammos, spellos, hyphenation. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:07 UTC
74dbdd2 Andrea Arcangeli 08 January 2010, 22:43:05 UTC mm: hugetlb: fix clear_huge_page() sz is in bytes, MAX_ORDER_NR_PAGES is in pages. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: David Gibson <dwg@au1.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
b5430a0 Tomaz Mertelj 08 January 2010, 22:43:04 UTC hwmon: driver for Texas Instruments amc6821 chip Signed-off-by: <tomaz.mertelj@guest.arnes.si> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
24f3c59 Jani Nikula 08 January 2010, 22:43:03 UTC gpiolib: fix poll(2) support reconfigure on sysfs polarity change Previously enabled poll(2) support on one edge was never reconfigured when sysfs polarity change was triggered from kernel, because 'struct device *dev' shadowed an earlier definition. Found by sparse, which I should've run much earlier. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
3f47240 Uwe Kleine-König 08 January 2010, 22:43:02 UTC vsnprintf: fix reference for compressed ipv6 addresses Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Josip Rodin <joy@entuzijast.net> Cc: Joe Perches <joe@perches.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
11723ab Adrian Hunter 08 January 2010, 22:43:01 UTC mmc: allow for MMC v4.4 JEDEC eMMC specification version 4.4 (MMCA 4.4) defines Extended CSD structure versions up to 5. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
5fa83ce Adrian Hunter 08 January 2010, 22:43:00 UTC mmc_block: fix queue cleanup The main bug was that 'blk_cleanup_queue()' was called while the block device could still be in use, for example, because the card was removed while files were still open. In addition, to be sure that 'mmc_request()' will get called for all new requests (so it can error them out), the queue is emptied during cleanup. This is done after the worker thread is stopped to avoid racing with it. Finally, it is not a device error for this to be happening, so quiet the (sometimes very many) error messages. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
0a74ff2 Jarkko Lavinen 08 January 2010, 22:42:59 UTC mmc_block: fix probe error cleanup bug If mmc_blk_set_blksize() fails mmc_blk_probe() the request queue and its thread have been set up and they need to be shut down properly before putting the disk. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
7d92df6 Anna Lemehova 08 January 2010, 22:42:58 UTC mmc_block: add dev_t initialization check When a card is removed before mmc_blk_probe() has called add_disk(), then the minor field is uninitialized and has value 0. This caused mmc_blk_put() to always release devidx 0 even if 0 was still in use. Then the next mmc_blk_probe() used the first free idx of 0, which oopses in sysfs, since it is used by another card. Signed-off-by: Anna Lemehova <EXT-Anna.Lemehova@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
0a88422 Randy Dunlap 08 January 2010, 22:42:57 UTC power: fix kernel-doc notation Warning(drivers/base/power/main.c:453): No description found for parameter 'dev' Warning(drivers/base/power/main.c:453): No description found for parameter 'cb' Warning(drivers/base/power/main.c:719): No description found for parameter 'dev' Warning(drivers/base/power/main.c:719): No description found for parameter 'state' Warning(drivers/base/power/main.c:719): No description found for parameter 'cb' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
1306d60 KOSAKI Motohiro 08 January 2010, 22:42:56 UTC proc: partially revert "procfs: provide stack information for threads" Commit d899bf7b (procfs: provide stack information for threads) introduced to show stack information in /proc/{pid}/status. But it cause large performance regression. Unfortunately /proc/{pid}/status is used ps command too and ps is one of most important component. Because both to take mmap_sem and page table walk are heavily operation. If many process run, the ps performance is, [before d899bf7b] % perf stat ps >/dev/null Performance counter stats for 'ps': 4090.435806 task-clock-msecs # 0.032 CPUs 229 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 234 page-faults # 0.000 M/sec 8587565207 cycles # 2099.425 M/sec 9866662403 instructions # 1.149 IPC 3789415411 cache-references # 926.409 M/sec 30419509 cache-misses # 7.437 M/sec 128.859521955 seconds time elapsed [after d899bf7b] % perf stat ps > /dev/null Performance counter stats for 'ps': 4305.081146 task-clock-msecs # 0.028 CPUs 480 context-switches # 0.000 M/sec 2 CPU-migrations # 0.000 M/sec 237 page-faults # 0.000 M/sec 9021211334 cycles # 2095.480 M/sec 10605887536 instructions # 1.176 IPC 3612650999 cache-references # 839.160 M/sec 23917502 cache-misses # 5.556 M/sec 152.277819582 seconds time elapsed Thus, this patch revert it. Fortunately /proc/{pid}/task/{tid}/smaps provide almost same information. we can use it. Commit d899bf7b introduced two features: 1) Add the annotattion of [thread stack: xxxx] mark to /proc/{pid}/task/{tid}/maps. 2) Add StackUsage field to /proc/{pid}/status. I only revert (2), because I haven't seen (1) cause regression. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:06 UTC
f146aab Florian Fainelli 08 January 2010, 22:42:54 UTC .gitignore: ignore vmlinuz MIPS compressed kernels output a vmlinuz file in the top-level directory (maybe others do). Add vmlinuz to the list of files to ignore by git. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
b45c6e7 Andi Kleen 08 January 2010, 22:42:52 UTC kernel/signal.c: fix kernel information leak with print-fatal-signals=1 When print-fatal-signals is enabled it's possible to dump any memory reachable by the kernel to the log by simply jumping to that address from user space. Or crash the system if there's some hardware with read side effects. The fatal signals handler will dump 16 bytes at the execution address, which is fully controlled by ring 3. In addition when something jumps to a unmapped address there will be up to 16 additional useless page faults, which might be potentially slow (and at least is not very efficient) Fortunately this option is off by default and only there on i386. But fix it by checking for kernel addresses and also stopping when there's a page fault. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
bd4f490 Dave Anderson 08 January 2010, 22:42:50 UTC cgroups: fix 2.6.32 regression causing BUG_ON() in cgroup_diput() The LTP cgroup test suite generates a "kernel BUG at kernel/cgroup.c:790!" here in cgroup_diput(): /* * if we're getting rid of the cgroup, refcount should ensure * that there are no pidlists left. */ BUG_ON(!list_empty(&cgrp->pidlists)); The cgroup pidlist rework in 2.6.32 generates the BUG_ON, which is caused when pidlist_array_load() calls cgroup_pidlist_find(): (1) if a matching cgroup_pidlist is found, it down_write's the mutex of the pre-existing cgroup_pidlist, and increments its use_count. (2) if no matching cgroup_pidlist is found, then a new one is allocated, it down_write's its mutex, and the use_count is set to 0. (3) the matching, or new, cgroup_pidlist gets returned back to pidlist_array_load(), which increments its use_count -- regardless whether new or pre-existing -- and up_write's the mutex. So if a matching list is ever encountered by cgroup_pidlist_find() during the life of a cgroup directory, it results in an inflated use_count value, preventing it from ever getting released by cgroup_release_pid_array(). Then if the directory is subsequently removed, cgroup_diput() hits the BUG_ON() when it finds that the directory's cgroup is still populated with a pidlist. The patch simply removes the use_count increment when a matching pidlist is found by cgroup_pidlist_find(), because it gets bumped by the calling pidlist_array_load() function while still protected by the list's mutex. Signed-off-by: Dave Anderson <anderson@redhat.com> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Ben Blum <bblum@andrew.cmu.edu> Cc: Paul Menage <menage@google.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
272a897 Joe Perches 08 January 2010, 22:42:48 UTC scripts/get_maintainer.pl: fix file exclusion X: logic The following command doesn't generate any output. `./scripts/get_maintainer.pl --no-git -f drivers/net/wireless/wl12xx/wl1271_acx.c` An excluded "X:" pattern match in any section would cause a file not to match any other section. Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
7ee3aeb Sascha Hauer 08 January 2010, 22:42:47 UTC lib/rational.c needs module.h lib/rational.c:62: warning: data definition has no type or storage class lib/rational.c:62: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' lib/rational.c:62: warning: parameter names (without types) in function declaration Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Oskar Schirmer <os@emlix.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
cacb246 Albin Tonnerre 08 January 2010, 22:42:46 UTC Add LZO compression support for initramfs and old-style initrd Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
1351099 Albin Tonnerre 08 January 2010, 22:42:45 UTC x86: add support for LZO-compressed kernels The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
e7db7b4 Albin Tonnerre 08 January 2010, 22:42:43 UTC arm: add support for LZO-compressed kernels - changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:05 UTC
7dd65fe Albin Tonnerre 08 January 2010, 22:42:42 UTC lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
ac4c2a3 Joakim Tjernlund 08 January 2010, 22:42:40 UTC zlib: optimize inffast when copying direct from output JFFS2 uses lesser compression ratio and inflate always ends up in "copy direct from output" case. This patch tries to optimize the direct copy procedure. Uses get_unaligned() but only in one place. The copy loop just above this one can also use this optimization, but I havn't done so as I have not tested if it is a win there too. On my MPC8321 this is about 17% faster on my JFFS2 root FS than the original. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
129182e Andrew Morton 08 January 2010, 22:42:39 UTC percpu: avoid calling __pcpu_ptr_to_addr(NULL) __pcpu_ptr_to_addr() can be overridden by the architecture and might not behave well if passed a NULL pointer. So avoid calling it until we have verified that its arg is not NULL. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
8767ba2 Masami Hiramatsu 08 January 2010, 22:42:38 UTC kmod: fix resource leak in call_usermodehelper_pipe() Fix resource (write-pipe file) leak in call_usermodehelper_pipe(). When call_usermodehelper_exec() fails, write-pipe file is opened and call_usermodehelper_pipe() just returns an error. Since it is hard for caller to determine whether the error occured when opening the pipe or executing the helper, the caller cannot close the pipe by themselves. I've found this resoruce leak when testing coredump. You can check how the resource leaks as below; $ echo "|nocommand" > /proc/sys/kernel/core_pattern $ ulimit -c unlimited $ while [ 1 ]; do ./segv; done &> /dev/null & $ cat /proc/meminfo (<- repeat it) where segv.c is; //----- int main () { char *p = 0; *p = 1; } //----- This patch closes write-pipe file if call_usermodehelper_exec() failed. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
42d53b4 Krzysztof Halasa 08 January 2010, 22:42:36 UTC dma-debug: allow DMA_BIDIRECTIONAL mappings to be synced with DMA_FROM_DEVICE and There is no need to perform full BIDIR sync (copying the buffers in case of swiotlb and similar schemes) if we know that the owner (CPU or device) hasn't altered the data. Addresses the false-positive reported at http://bugzilla.kernel.org/show_bug.cgi?id=14169 Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: David Miller <davem@davemloft.net> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
e992cd9 Vegard Nossum 08 January 2010, 22:42:35 UTC kmemcheck: make bitfield annotations truly no-ops when disabled It turns out that even zero-sized struct members (int foo[0];) will affect the struct layout, causing us in particular to lose 4 bytes in struct sock. This patch fixes the regression in CONFIG_KMEMCHECK=n case. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
cb5a8b2 Randy Dunlap 08 January 2010, 22:42:34 UTC docs: large update to ioctl-number.txt Add many ioctl definitions to ioctl-number.txt. Fix some whitespace/formatting. Correct some filenames/paths. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:04 UTC
4b52940 Andreas Fenkart 08 January 2010, 22:42:31 UTC mm: make totalhigh_pages unsigned long Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 January 2010, 17:34:03 UTC
cc20b90 Simon Kagstrom 11 January 2010, 14:57:24 UTC ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock The console hangs during bootup when disable_irq is called from the transmit interrupt handler (it will wait forever for it's "own" interrupt in synchronize_irq). Fix by using disable_irq_nosync() instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 11 January 2010, 15:39:21 UTC
back to top