Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
b57f95a Linus Torvalds 10 May 2010, 01:36:28 UTC Linux 2.6.34-rc7 10 May 2010, 01:36:28 UTC
93cb463 Linus Torvalds 10 May 2010, 01:35:53 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error [SCSI] scsi_debug: virtual_gb ignores sector_size [SCSI] libiscsi: regression: fix header digest errors [SCSI] fix locking around blk_abort_request() [SCSI] advansys: fix narrow board error path 10 May 2010, 01:35:53 UTC
1c6fe03 Arjan van de Ven 08 May 2010, 22:47:37 UTC cpuidle: Fix incorrect optimization commit 672917dcc78 ("cpuidle: menu governor: reduce latency on exit") added an optimization, where the analysis on the past idle period moved from the end of idle, to the beginning of the new idle. Unfortunately, this optimization had a bug where it zeroed one key variable for new use, that is needed for the analysis. The fix is simple, zero the variable after doing the work from the previous idle. During the audit of the code that found this issue, another issue was also found; the ->measured_us data structure member is never set, a local variable is always used instead. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Corrado Zoccolo <czoccolo@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 May 2010, 01:35:36 UTC
f1c448e Linus Torvalds 07 May 2010, 21:11:40 UTC Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: restore ability of spare drives to spin down. md/raid6: Fix raid-6 read-error correction in degraded state 07 May 2010, 21:11:40 UTC
2c32b1d Linus Torvalds 07 May 2010, 21:11:09 UTC Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath 07 May 2010, 21:11:09 UTC
48fe37c Linus Torvalds 07 May 2010, 21:07:20 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: blk-cgroup: Fix an RCU warning in blkiocg_create() blk-cgroup: Fix RCU correctness warning in cfq_init_queue() drbd: don't expose failed local READ to upper layers 07 May 2010, 21:07:20 UTC
e33b3e7 Linus Torvalds 07 May 2010, 21:02:01 UTC Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/ttm: Remove the ttm_bo_block_reservation() function. drm/ttm: Remove some leftover debug messages. drm/radeon: async event synchronization for drmWaitVblank 07 May 2010, 21:02:01 UTC
e2dbe06 Stijn Tintel 07 May 2010, 04:58:34 UTC virtio: initialize earlier Move initialization of the virtio framework before the initialization of mtd, so that block2mtd can be used on virtio-based block devices. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 May 2010, 21:01:17 UTC
9167746 Linus Torvalds 07 May 2010, 20:59:48 UTC Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix RCU issues in the NFSv4 delegation code NFSv4: Fix the locking in nfs_inode_reclaim_delegation() 07 May 2010, 20:59:48 UTC
4a22533 Linus Torvalds 07 May 2010, 20:59:22 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x ACPI: fix acpi_hest_firmware_first_pci() caused oops sbshc: acpi_device_class "smbus_host_controller" too long power_meter: acpi_device_class "power_meter_resource" too long acpi_pad: "processor_aggregator" name too long PNP: don't check for conflicts with bridge windows ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads PNPACPI: compute Address Space length rather than using _LEN ACPI: silence kmemcheck false positive 07 May 2010, 20:59:22 UTC
417a9ef Linus Torvalds 07 May 2010, 20:58:56 UTC Merge branch 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow 07 May 2010, 20:58:56 UTC
91bc482 Linus Torvalds 07 May 2010, 20:58:21 UTC Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: create rcu_my_thread_group_empty() wrapper memcg: css_id() must be called under rcu_read_lock() cgroup: Check task_lock in task_subsys_state() sched: Fix an RCU warning in print_task() cgroup: Fix an RCU warning in alloc_css_id() cgroup: Fix an RCU warning in cgroup_path() KEYS: Fix an RCU warning in the reading of user keys KEYS: Fix an RCU warning 07 May 2010, 20:58:21 UTC
1176568 NeilBrown 07 May 2010, 09:44:26 UTC md: restore ability of spare drives to spin down. Some time ago we stopped the clean/active metadata updates from being written to a 'spare' device in most cases so that it could spin down and say spun down. Device failure/removal etc are still recorded on spares. However commit 51d5668cb2e3fd1827a55 broke this 50% of the time, depending on whether the event count is even or odd. The change log entry said: This means that the alignment between 'odd/even' and 'clean/dirty' might take a little longer to attain, how ever the code makes no attempt to create that alignment, so it could take arbitrarily long. So when we find that clean/dirty is not aligned with odd/even, force a second metadata-update immediately. There are already cases where a second metadata-update is needed immediately (e.g. when a device fails during the metadata update). We just piggy-back on that. Reported-by: Joe Bryant <tenminjoe@yahoo.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org 07 May 2010, 11:10:57 UTC
87aa630 Gabriele A. Trombetti 28 April 2010, 01:51:17 UTC md/raid6: Fix raid-6 read-error correction in degraded state Fix: Raid-6 was not trying to correct a read-error when in singly-degraded state and was instead dropping one more device, going to doubly-degraded state. This patch fixes this behaviour. Tested-by: Janos Haar <janos.haar@netcenter.hu> Signed-off-by: Gabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com> Reported-by: Janos Haar <janos.haar@netcenter.hu> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org 07 May 2010, 11:10:35 UTC
0341509 Li Zefan 07 May 2010, 06:57:00 UTC blk-cgroup: Fix an RCU warning in blkiocg_create() with CONFIG_PROVE_RCU=y, a warning can be triggered: # mount -t cgroup -o blkio xxx /mnt # mkdir /mnt/subgroup ... kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection! ... To fix this, we avoid caling css_depth() here, which is a bit simpler than the original code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 07 May 2010, 06:57:00 UTC
1468cf0 Len Brown 07 May 2010, 02:04:31 UTC Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', 'bugzilla-15903' and 'misc-2.6.34' into release 07 May 2010, 02:04:31 UTC
8cfe92d Thomas Hellstrom 28 April 2010, 09:33:25 UTC drm/ttm: Remove the ttm_bo_block_reservation() function. It's unused and buggy in its current form, since it can place a bo in the reserved state without removing it from lru lists. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 06 May 2010, 23:21:28 UTC
5be6eff Thomas Hellstrom 28 April 2010, 09:33:24 UTC drm/ttm: Remove some leftover debug messages. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 06 May 2010, 23:20:56 UTC
4fa07bf Jerome Glisse 06 May 2010, 16:52:14 UTC drm/radeon: async event synchronization for drmWaitVblank Bring radeon up to speed with the async event synchronization for drmWaitVblank. See c9a9c5e02aedc1a2815877b0268f886d2640b771 for more information. Without this patch event never get delivered to userspace client. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 06 May 2010, 23:16:56 UTC
a47f6be Stefan Herbrechtsmeier 20 April 2010, 06:51:29 UTC V4L/DVB: pxa_camera: move fifo reset direct before dma start Move the fifo reset from pxa_camera_start_capture to pxa_camera_irq direct before the dma start after an end of frame interrupt to prevent images from shifting because of old data at the begin of the frame. Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:52 UTC
981cbef Dan Carpenter 07 April 2010, 09:41:14 UTC V4L/DVB: video: testing unsigned for less than 0 soc_mbus_bytes_per_line() returns -EINVAL on error but we store it in an unsigned int so the test for less than zero doesn't work. I think it always returns "small" positive values so we can just cast it to int here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:52 UTC
b7d41d6 Uwe Kleine-König 27 March 2010, 21:42:13 UTC V4L/DVB: mx1-camera: compile fix This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:51 UTC
6f550dc Bjørn Mork 24 March 2010, 10:57:57 UTC V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops, which will be triggered by a missing stv090x module: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:51 UTC
5dd92c1 Oliver Endriss 21 March 2010, 14:48:47 UTC V4L/DVB: ngene: Workaround for stuck DiSEqC pin Send one DiSEqC byte to make sure that the pin is set to low level. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Reviewed-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:51 UTC
03b1930 Hans Verkuil 24 March 2010, 22:09:55 UTC V4L/DVB: saa7146: fix regression of the av7110/budget-av driver An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too late) caused a new regression in the av7110 driver. Reverted the old fix and fixed the problem in the mxb driver instead. Tested on mxb and budget-av cards. The real problem is that the saa7146 framework has separate probe() and attach() driver callbacks which should be rolled into one. This is now done for the mxb driver, but others should do the same. Lack of hardware makes this hard to do, though. I hope to get hold of some hexium cards and then I can try to improve the framework to prevent this from happening again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:50 UTC
d2f2d6d Hans Verkuil 22 March 2010, 06:14:22 UTC V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:50 UTC
b75396a Hans Verkuil 22 March 2010, 08:43:08 UTC V4L/DVB: feature-removal: announce videotext.h removal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:20:50 UTC
6a4f062 Muralidharan Karicheri 18 March 2010, 14:44:12 UTC V4L/DVB: V4L - vpfe capture - fix for kernel crash As part of upstream merge, set_params() function was removed from isif.c. This requires removal of BUG_ON() and check for set_params ptr in vpfe_capture.c. Without this kernel crash dump is seen while bootup on DM365 Also made following changes:- 1) converted error messages to debug messages since it is not right to flood the console with error messages for user mistakes. 2) returns -EINVAL if ioctl is not supported Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:05 UTC
f8f73d0 John Ellson 17 March 2010, 13:22:58 UTC V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver The 0461:0815 camera is spca561 based not spca508 Signed-off-by: John Ellson <john.ellson@comcast.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:05 UTC
55e0b48 Erik Andrén 08 March 2010, 20:16:00 UTC V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver The 046d:08da usb id shouldn't be associated with the stv06xx driver as they're not compatible with each other. This fixes a bug where Quickcam Messenger cams fail to use its proper driver (gspca-zc3xx), rendering the camera inoperable. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:04 UTC
a76b9f4 Yong Zhang 05 February 2010, 13:52:39 UTC V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> CC: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:04 UTC
84a1d9c Michael Hunold 13 March 2010, 14:45:46 UTC V4L/DVB: saa7146: fix up bytesperline if it is an impossible value xawtv using DGA on a Radeon graphics card provides bogus values to S_FBUF, which will then screw up overlay video: https://bugs.launchpad.net/ubuntu/+source/xawtv/+bug/499734 This fixes the bytesperline value if it is off completely. Signed-off-by: Michael Hunold <michael@mihu.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:04 UTC
ab51bec Murali Karicheri 01 March 2010, 22:54:02 UTC V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails This patch fixes a bug in vpfe_probe() that doesn't call mutex_unlock() if memory allocation for ccdc_cfg fails. See also the smatch warning report from Dan Carpenter that shows this as an issue. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:02 UTC
b704e82 Vaibhav Hiremath 13 March 2010, 13:58:39 UTC V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:19:00 UTC
2132def Dan Carpenter 10 March 2010, 10:57:03 UTC V4L/DVB: omap24xxcam: potential buffer overflow The previous loop goes until last == VIDEO_MAX_FRAME, so this could potentially go one past the end of the loop. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 06 May 2010, 22:18:58 UTC
ea5bc73 Kamal Mostafa 27 April 2010, 21:02:40 UTC ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x Add Dell Studio models (1558, 1557, 1555) to the 'set_sci_en_on_resume' list to fix hang on resume. BugLink: http://bugs.launchpad.net/bugs/553498 Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Alex Chiang <achiang@canonical.com> Cc: stable@kernel.org Signed-off-by: Len Brown <len.brown@intel.com> 06 May 2010, 17:22:45 UTC
ee84b82 Paul E. McKenney 06 May 2010, 16:28:41 UTC rcu: create rcu_my_thread_group_empty() wrapper Some RCU-lockdep splat repairs need to know whether they are running in a single-threaded process. Unfortunately, the thread_group_empty() primitive is defined in sched.h, and can induce #include hell. This commit therefore introduces a rcu_my_thread_group_empty() wrapper that is defined in rcupdate.c, thus avoiding the need to include sched.h everywhere. Signed-off-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> 06 May 2010, 16:28:41 UTC
e8e8fad Linus Torvalds 06 May 2010, 15:38:20 UTC Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze * 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Defconfig update microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros microblaze: Fix consistent-sync code microblaze: Define correct L1_CACHE_SHIFT value microblaze: cpuinfo shows cache line length microblaze: Fix kmalloc alignment on non-coherent DMA platforms microblaze: Fix typo fault in cache code microblaze: Fix consistent code microblaze: pci-dma: use include/linux/dma-mapping.h microblaze: page.h: Remove get_user_page and free_user_page microblaze: Remove "cache" optimized copy_page function microblaze: invoke oom-killer from page fault microblaze: fix divide by zero exception message microblaze: Add isa_dma_bridge_buggy to dma.h microblaze: Remove ancient code microblaze: Quiet section mismatch warnings for MMU version microblaze: Quiet section mismatch warnings microblaze: Fix IRQ entry/exit ftracing microblaze: resource/PCI: align functions now return start of resource microblaze: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs 06 May 2010, 15:38:20 UTC
325ce9e Linus Torvalds 06 May 2010, 15:38:03 UTC Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.h [ARM] pxa/spitz: fix On/off key name to fix warning during boot [ARM] pxa: fix the incorrect cpu_is_pxa950() [ARM] pxa: update cpuid pattern for pxa9xx in head.S [ARM] pxa/viper: fix timeout usage for I2C [ARM] pxa/raumfeld: fix button name [ARM] pxa/imote2: Fix iMote2 defconfig [ARM] pxa: add missing new line to regs-u2d.h ARM: 6093/1: Fix kernel memory printing for sparsemem arch/arm/include/asm/elf.h: forward-declare the task-struct arch/arm/plat-pxa/dma.c: correct NULL test ARM: 6076/1: SA1100: add processor check to sa1110-cpufreq driver ARM: 6075/1: SA1100: fix wrong CPU type for h3100 and h3600 ARM: Update mach-types ARM: 6066/1: Fix "BUG: scheduling while atomic: swapper/0/0x00000002 ARM: 6068/1: Fix build break with KPROBES enabled mx5: Fix build error for mx51_defconfig 06 May 2010, 15:38:03 UTC
bbfdbe9 Linus Torvalds 06 May 2010, 15:37:39 UTC Merge branch 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: fix a number of Oopses and leaks in SH framebuffer driver SH: fix error paths in DMA driver sh: sh7751 pci controller io port fix sh: Fix maximum number of SCIF ports in R2D defconfigs SH: fix TS field shift calculation for DMA drivers 06 May 2010, 15:37:39 UTC
6513412 Michal Simek 06 May 2010, 09:37:42 UTC microblaze: Defconfig update Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:37:42 UTC
3274c57 Michal Simek 26 April 2010, 06:54:13 UTC microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros 1. Remove CACHE_ALL_LOOP2 macro because it is identical to CACHE_ALL_LOOP 2. Change BUG_ON to WARN_ON 3. Remove end aligned from CACHE_LOOP_LIMITS. C implementation do not need aligned end address and ASM code do aligned in their macros 4. ASM optimized CACHE_RANGE_LOOP_1/2 macros needs to get aligned end address. Because end address is compound from start + size, end address is the first address which is exclude. Here is the corresponding code which describe it. + int align = ~(line_length - 1); + end = ((end & align) == end) ? end - line_length : end & align; a) end is aligned: it is necessary to subtruct line length because we don't want to work with next cacheline b) end address is not aligned: Just align it to be ready for ASM code. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:22:00 UTC
385e1ef Michal Simek 29 April 2010, 11:02:17 UTC microblaze: Fix consistent-sync code PCI_DMA_FROMDEVICE should call invalidation not flushing. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:22:00 UTC
598acab Michal Simek 26 April 2010, 11:43:23 UTC microblaze: Define correct L1_CACHE_SHIFT value Microblaze cacheline length is configurable and current cpu uses two cacheline length 4 and 8. We are taking conservative maximum value to be sure that cacheline alignment is satisfied for all cases. Here is the calculation for cacheline lenght 8 32bit=4Byte values which is corresponding with SHIFT 5. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
77543ce Michal Simek 26 April 2010, 11:53:04 UTC microblaze: cpuinfo shows cache line length Show cache line length in /proc/cpuinfo. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
de925d9 Michal Simek 26 April 2010, 11:49:01 UTC microblaze: Fix kmalloc alignment on non-coherent DMA platforms Based on PowerPC patche 52142e756e9bf6485d3d53596e8aff2e816a7253 PowerPC description: On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important that the kmalloc minimum alignment is set to the cache line size, to avoid sharing cache lines between different objects, so that DMA to one of the objects doesn't corrupt the other. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
c17e1a1 Michal Simek 23 April 2010, 09:38:43 UTC microblaze: Fix typo fault in cache code Copy & paste error. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
f152576 Michal Simek 10 April 2010, 15:34:06 UTC microblaze: Fix consistent code This patch fix consistent code which had problems with consistent_free function. I am not sure if we need to call flush_tlb_all after it but it keeps tlbs synced. I added noMMU and MMU version together. Uncached shadow feature is not tested. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
16f6e99 Michal Simek 16 April 2010, 07:13:27 UTC microblaze: pci-dma: use include/linux/dma-mapping.h Based on af407c6db16aa9ca63559076dbe620220a822580 and f41b177157718abe9a93868bb76e47d4a6f3681d Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
22dcc2e Michal Simek 22 April 2010, 06:07:46 UTC microblaze: page.h: Remove get_user_page and free_user_page Remove ancient macros which are here from Linux-2.4 Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:59 UTC
43f2a6e Michal Simek 22 April 2010, 05:28:48 UTC microblaze: Remove "cache" optimized copy_page function Current implementation doesn't handle dcache_line_length correctly that's why is better to use generic memcpy. Cache optimized function could be good way howto improve performance but must be based on benchmarking not blind function like this. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:58 UTC
21e1c93 Nick Piggin 22 April 2010, 16:06:21 UTC microblaze: invoke oom-killer from page fault As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: microblaze-uclinux@itee.uq.edu.au Cc: Michal Simek <monstr@monstr.eu> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:58 UTC
f3ff821 Randy Dunlap 21 April 2010, 21:11:34 UTC microblaze: fix divide by zero exception message Fix divide exception message to say "divide by zero". Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:58 UTC
113a591 Michal Simek 20 April 2010, 17:02:13 UTC microblaze: Add isa_dma_bridge_buggy to dma.h It is necessary for several drivers. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:58 UTC
e768223 Michal Simek 16 April 2010, 07:41:07 UTC microblaze: Remove ancient code I found several function which we don't use that's why I am removing them. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:58 UTC
63f1032 Michal Simek 13 April 2010, 06:59:37 UTC microblaze: Quiet section mismatch warnings for MMU version Remove section mismatch - based on ppc aproach. WARNING: vmlinux.o(.text+0x64834): Section mismatch in reference from the function __pte_alloc_kernel() to the function .init.text:early_get_page() The function __pte_alloc_kernel() references the function __init early_get_page(). This is often because __pte_alloc_kernel lacks a __init annotation or the annotation of early_get_page is wrong. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:58 UTC
7a0248e Steven J. Magnani 10 April 2010, 03:03:37 UTC microblaze: Quiet section mismatch warnings _start is located in .text, which causes mismatch warnings with machine_early_init() and start_kernel() in .init.text. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:57 UTC
e6d7961 Steven J. Magnani 12 April 2010, 21:01:36 UTC microblaze: Fix IRQ entry/exit ftracing Function traces on Microblaze don't include IRQ entry and exit arrows, i.e. 0) | memcpy_toiovec() { 0) ==========> | 0) | do_IRQ() { ... 0) <========== | 0) ! 5414.000 us | } ...because do_IRQ() doesn't have the proper attributes. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:57 UTC
c86fac4 Michal Simek 16 April 2010, 07:04:51 UTC microblaze: resource/PCI: align functions now return start of resource This change should be part of b26b2d494b659f988b4d75eb394dfa0ddac415c9 Origin description: resource/PCI: align functions now return start of resource As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:57 UTC
8a66da7 Michal Simek 16 April 2010, 07:03:00 UTC microblaze: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs This change should be part of 89a74ecccd1f78e51faf6287e5c0e93a92ac096e Origin description: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Michal Simek <monstr@monstr.eu> 06 May 2010, 09:21:57 UTC
257dab8 Russell King 06 May 2010, 07:16:34 UTC Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 06 May 2010, 07:16:34 UTC
dcf097b Vivek Goyal 22 April 2010, 15:54:52 UTC blk-cgroup: Fix RCU correctness warning in cfq_init_queue() It is necessary to be in an RCU read-side critical section when invoking css_id(), so this patch adds one to blkiocg_add_blkio_group(). This is actually a false positive, because this is called at initialization time and hence always refers to the root cgroup, which cannot go away. [ 103.790505] =================================================== [ 103.790509] [ INFO: suspicious rcu_dereference_check() usage. ] [ 103.790511] --------------------------------------------------- [ 103.790514] kernel/cgroup.c:4432 invoked rcu_dereference_check() without protection! [ 103.790517] [ 103.790517] other info that might help us debug this: [ 103.790519] [ 103.790521] [ 103.790521] rcu_scheduler_active = 1, debug_locks = 1 [ 103.790524] 4 locks held by bash/4422: [ 103.790526] #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8114befa>] sysfs_write_file+0x3c/0x144 [ 103.790537] #1: (s_active#102){.+.+.+}, at: [<ffffffff8114bfa5>] sysfs_write_file+0xe7/0x144 [ 103.790544] #2: (&q->sysfs_lock){+.+.+.}, at: [<ffffffff812263b1>] queue_attr_store+0x49/0x8f [ 103.790552] #3: (&(&blkcg->lock)->rlock){......}, at: [<ffffffff8122e4db>] blkiocg_add_blkio_group+0x2b/0xad [ 103.790560] [ 103.790561] stack backtrace: [ 103.790564] Pid: 4422, comm: bash Not tainted 2.6.34-rc4-blkio-second-crash #81 [ 103.790567] Call Trace: [ 103.790572] [<ffffffff81068f57>] lockdep_rcu_dereference+0x9d/0xa5 [ 103.790577] [<ffffffff8107fac1>] css_id+0x44/0x57 [ 103.790581] [<ffffffff8122e503>] blkiocg_add_blkio_group+0x53/0xad [ 103.790586] [<ffffffff81231936>] cfq_init_queue+0x139/0x32c [ 103.790591] [<ffffffff8121f2d0>] elv_iosched_store+0xbf/0x1bf [ 103.790595] [<ffffffff812263d8>] queue_attr_store+0x70/0x8f [ 103.790599] [<ffffffff8114bfa5>] ? sysfs_write_file+0xe7/0x144 [ 103.790603] [<ffffffff8114bfc6>] sysfs_write_file+0x108/0x144 [ 103.790609] [<ffffffff810f527f>] vfs_write+0xae/0x10b [ 103.790612] [<ffffffff81069863>] ? trace_hardirqs_on_caller+0x10c/0x130 [ 103.790616] [<ffffffff810f539c>] sys_write+0x4a/0x6e [ 103.790622] [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b [ 103.790625] Located-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 06 May 2010, 06:54:00 UTC
4bdae98 Shaohua Li 08 April 2010, 03:16:15 UTC ACPI: fix acpi_hest_firmware_first_pci() caused oops acpi_hest_firmware_first_pci() could be called when acpi is disabled and cause system oops. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 06 May 2010, 06:39:06 UTC
97c227c Dan Carpenter 27 April 2010, 21:06:05 UTC sbshc: acpi_device_class "smbus_host_controller" too long acpi_device_class can only be 19 characters and a NULL terminator. With the current name we get a buffer overflow in acpi_smbus_hc_add() when we do: strcpy(acpi_device_class(device), ACPI_SMB_HC_CLASS); Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> 06 May 2010, 06:38:25 UTC
1826271 Dan Carpenter 27 April 2010, 21:01:07 UTC power_meter: acpi_device_class "power_meter_resource" too long acpi_device_class can only be 19 characters and a NULL terminator. The current code has a buffer overflow in acpi_power_meter_add(): strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> 06 May 2010, 06:38:24 UTC
a40770a Dan Carpenter 27 April 2010, 21:06:05 UTC acpi_pad: "processor_aggregator" name too long cpi_device_class can only be 19 characters and a NULL terminator. With the current name we get a buffer overflow in acpi_pad_add() strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS); [akpm@linux-foundation.org: call it acpi_pad, per Shaohua Li] Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: walter harms <wharms@bfs.de> Acked-by: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> 06 May 2010, 06:38:23 UTC
11439a6 Bjorn Helgaas 03 May 2010, 16:47:21 UTC PNP: don't check for conflicts with bridge windows With fa35b4926, I broke a lot of PNP resource assignment. That commit made PNPACPI include bridge windows as PNP resources, and PNP resource assignment treats any enabled overlapping PNP resources as conflicts. Since PCI host bridge windows typically include most of the I/O port space, this makes PNP port assigments fail. The PCI host bridge driver will eventually use those PNP window resources, so we should make PNP ignore them when checking for conflicts. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15903 Reported-and-tested-by: Pavel Kysilka <goldenfish@linuxsoft.cz> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> 06 May 2010, 06:08:47 UTC
8bed905 Guennadi Liakhovetski 30 April 2010, 16:07:00 UTC sh: fix a number of Oopses and leaks in SH framebuffer driver Fix a number of Oopses, memory leaks and unbalanced calls on error paths in sh_mobile_lcdcfb.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 06 May 2010, 04:24:56 UTC
ccb8d8d Jakob Viketoft 05 May 2010, 10:25:27 UTC [ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.h The use of mfp_cfg_t causes build errors without including <mach/mfp.h>. CC: stable@kernel.org CC: Daniel Mack <daniel@caiaq.de> Signed-off-by: Jakob Viketoft <jakob.viketoft@bitsim.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:12 UTC
b53f771 Pavel Machek 05 May 2010, 07:03:12 UTC [ARM] pxa/spitz: fix On/off key name to fix warning during boot On/Off contains slash in the name, which causes warning during boot. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:11 UTC
5d2fec5 Haojian Zhuang 12 March 2010, 13:51:54 UTC [ARM] pxa: fix the incorrect cpu_is_pxa950() Fix the wrong variable used in cpu_is_pxa950(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:11 UTC
4157d31 Haojian Zhuang 12 March 2010, 10:47:55 UTC [ARM] pxa: update cpuid pattern for pxa9xx in head.S Update CPUID pattern of PXA9xx in head.S and fix the duplicate entries for pxa935. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:11 UTC
6ae87fe Wolfram Sang 18 April 2010, 11:48:29 UTC [ARM] pxa/viper: fix timeout usage for I2C The timeout value is in jiffies, so it should be using HZ, not a plain number. Assume with HZ=100 '100' means 1s here and adapt accordingly. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Shen <paul.shen@marvell.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:11 UTC
299ed07 Daniel Mack 18 April 2010, 07:35:29 UTC [ARM] pxa/raumfeld: fix button name "on/off button" was recently renamed to remove the slash character. Follow that change in the pin polarity detection as well. While at it, fix another cosmetic coding style flaw as well. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:11 UTC
12145ca Stefan Schmidt 08 April 2010, 14:03:25 UTC [ARM] pxa/imote2: Fix iMote2 defconfig - Bring in a CMDLINE that actually works and prints to the right tty - Compile-in JFFS2 to boot into rootfs - Remove unneeded options for Bluetooth and radio - Disable CPU_FREQ as it makes the flash driver fail Thanks Jonathan for spotting what I messed up. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:11 UTC
d5df767 Igor Grinberg 07 April 2010, 08:40:37 UTC [ARM] pxa: add missing new line to regs-u2d.h Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> 06 May 2010, 03:12:10 UTC
722154e Linus Torvalds 05 May 2010, 22:48:13 UTC Merge branch 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [MTD] Remove zero-length files mtdbdi.c and internal.ho 05 May 2010, 22:48:13 UTC
1d7746c Linus Torvalds 05 May 2010, 22:47:57 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs libata: Fix several inaccuracies in developer's guide 05 May 2010, 22:47:57 UTC
0fd6b32 Jeff Garzik 05 May 2010, 19:25:12 UTC [MTD] Remove zero-length files mtdbdi.c and internal.ho Both were "removed" in commit a33eb6b91034c95b9b08576f68be170f995b2c7d. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 05 May 2010, 19:25:12 UTC
85ea2d3 Kristoffer Ericson 02 May 2010, 19:48:24 UTC pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs This patch fixes the bad hashes for one Kingston and one Transcend card. Thanks to komuro for pointing this out. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 05 May 2010, 18:48:48 UTC
40868c8 Sergei Shtylyov 05 May 2010, 13:27:10 UTC libata: Fix several inaccuracies in developer's guide Commit 6bfff31e77cfa1b13490337e5a4dbaa3407e83ac (libata: kill probe_ent and related helpers) killed ata_device_add() but didn't remove references to it from the libata developer's guide. Commits 9363c3825ea9ad76561eb48a395349dd29211ed6 (libata: rename SFF functions) and 5682ed33aae05d10a25c95633ef9d9c062825888 (libata: rename SFF port ops) renamed the taskfile access methods but didn't update the developer's guide. Commit c9f75b04ed5ed65a058d18a8a8dda50632a96de8 (libata: kill ata_noop_dev_select()) didn't update the developer's guide as well. The guide also refers to the long gone ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), and ata_mmio_data_xfer() -- replace those by the modern ata_sff_data_xfer_noirq(), ata_sff_data_xfer(), and ata_sff_data_xfer32(). Also, remove the reference to non-existant ata_port_stop()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 05 May 2010, 18:48:27 UTC
65be2f5 Linus Torvalds 05 May 2010, 18:18:16 UTC Merge branch 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix bad boundary check in init_kmem_cache_nodes() 05 May 2010, 18:18:16 UTC
111c7d8 Zhang, Yanmin 01 April 2010, 09:32:30 UTC slub: Fix bad boundary check in init_kmem_cache_nodes() Function init_kmem_cache_nodes is incorrect when checking upper limitation of kmalloc_caches. The breakage was introduced by commit 91efd773c74bb26b5409c85ad755d536448e229c ("dma kmalloc handling fixes"). Acked-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> 05 May 2010, 18:12:19 UTC
07bedca Alex Chiang 20 April 2010, 14:03:14 UTC ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads Multiple Lenovo ThinkPad models with Intel Core i5/i7 CPUs can successfully suspend/resume once, and then hang on the second s/r cycle. We got confirmation that this was due to a BIOS defect. The BIOS did not properly set SCI_EN coming out of S3. The BIOS guys hinted that The Other Leading OS ignores the fact that hardware owns the bit and sets it manually. In any case, an existing DMI table exists for machines where this defect is a known problem. Lenovo promise to fix their BIOS, but for folks who either won't or can't upgrade their BIOS, allow Linux to workaround the issue. https://bugzilla.kernel.org/show_bug.cgi?id=15407 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/532374 Confirmed by numerous testers in the launchpad bug that using acpi_sleep=sci_force_enable fixes the issue. We add the machines to acpisleep_dmi_table[] to automatically enable this workaround. Cc: stable@kernel.org Cc: Colin King <colin.king@canonical.com> Signed-off-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com> 05 May 2010, 18:04:52 UTC
77a4229 James Bottomley 04 May 2010, 20:51:40 UTC [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error There's nastyness in the way we currently handle barriers (and discards): They're effectively filesystem commands, but they get processed as BLOCK_PC commands. Unfortunately BLOCK_PC commands are taken by SCSI to be SG_IO commands and the issuer expects to see and handle any returned errors, however trivial. This leads to a huge problem, because the block layer doesn't expect this to happen and any trivially retryable error on a barrier causes an immediate I/O error to the filesystem. The only real way to hack around this is to take the usual class of offending errors (unit attentions) and make them all retryable in the case of a REQ_HARDBARRIER. A correct fix would involve a rework of the entire block and SCSI submit system, and so is out of scope for a quick fix. Cc: Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 05 May 2010, 16:15:57 UTC
c213e14 Hannes Reinecke 04 May 2010, 14:49:21 UTC [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error Some arrays are giving I/O errors with ext3 filesystems when SYNCHRONIZE_CACHE gets a UNIT_ATTENTION. What is happening is that these commands have no retries, so the UNIT_ATTENTION causes the barrier to fail. We should be enable retries here to clear any transient error and allow the barrier to succeed. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 05 May 2010, 16:13:26 UTC
5f23370 Linus Torvalds 05 May 2010, 16:06:24 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: KEYS: call_sbin_request_key() must write lock keyrings before modifying them KEYS: Use RCU dereference wrappers in keyring key type code KEYS: find_keyring_by_name() can gain access to a freed keyring 05 May 2010, 16:06:24 UTC
8777c79 Linus Torvalds 05 May 2010, 14:56:36 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: flush_delayed_work: keep the original workqueue for re-queueing 05 May 2010, 14:56:36 UTC
7437e7d Linus Torvalds 05 May 2010, 14:55:07 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: FEC: Fix kernel panic in fec_set_mac_address. ipv6: Fix default multicast hops setting. net: ep93xx_eth stops receiving packets drivers/net/phy: micrel phy driver dm9601: fix phy/eeprom write routine ppp_generic: handle non-linear skbs when passing them to pppd ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid net: fix compile error due to double return type in SOCK_DEBUG net/usb: initiate sync sequence in sierra_net.c driver net/usb: remove default in Kconfig for sierra_net driver r8169: Fix rtl8169_rx_interrupt() e1000e: Fix oops caused by ASPM patch. net/sb1250: register mdio bus in probe sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4) p54pci: fix bugs in p54p_check_tx_ring 05 May 2010, 14:55:07 UTC
38c9e91 Linus Torvalds 05 May 2010, 14:54:22 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 ALSA: take tu->qlock with irqs disabled ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite P500-PSPGSC-01800T ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite Pro T130-15F ALSA: hda - fix array indexing while creating inputs for Cirrus codecs ALSA: es968: fix wrong PnP dma index 05 May 2010, 14:54:22 UTC
1d7aec3 Linus Torvalds 05 May 2010, 14:53:18 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - allow binding to button-only devices Input: elantech - ignore high bits in the position coordinates Input: elantech - allow forcing Elantech protocol Input: elantech - fix firmware version check Input: ati_remote - add some missing devices from lirc_atiusb Input: eeti_ts - cancel pending work when going to suspend Input: Add support of Synaptics Clickpad device Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops" Input: psmouse - ignore parity error for basic protocols 05 May 2010, 14:53:18 UTC
5157b4a Dan Williams 05 May 2010, 03:41:56 UTC raid6: fix recovery performance regression The raid6 recovery code should immediately drop back to the optimized synchronous path when a p+q dma resource is not available. Otherwise we run the non-optimized/multi-pass async code in sync mode. Verified with raid6test (NDISKS=255) Applies to kernels >= 2.6.32. Cc: <stable@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Reported-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 May 2010, 14:52:56 UTC
896903c David Howells 30 April 2010, 13:32:23 UTC KEYS: call_sbin_request_key() must write lock keyrings before modifying them call_sbin_request_key() creates a keyring and then attempts to insert a link to the authorisation key into that keyring, but does so without holding a write lock on the keyring semaphore. It will normally get away with this because it hasn't told anyone that the keyring exists yet. The new keyring, however, has had its serial number published, which means it can be accessed directly by that handle. This was found by a previous patch that adds RCU lockdep checks to the code that reads the keyring payload pointer, which includes a check that the keyring semaphore is actually locked. Without this patch, the following command: keyctl request2 user b a @s will provoke the following lockdep warning is displayed in dmesg: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/keyring.c:727 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by keyctl/2076: #0: (key_types_sem){.+.+.+}, at: [<ffffffff811a5b29>] key_type_lookup+0x1c/0x71 #1: (keyring_serialise_link_sem){+.+.+.}, at: [<ffffffff811a6d1e>] __key_link+0x4d/0x3c5 stack backtrace: Pid: 2076, comm: keyctl Not tainted 2.6.34-rc6-cachefs #54 Call Trace: [<ffffffff81051fdc>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff811a6d1e>] ? __key_link+0x4d/0x3c5 [<ffffffff811a6e6f>] __key_link+0x19e/0x3c5 [<ffffffff811a5952>] ? __key_instantiate_and_link+0xb1/0xdc [<ffffffff811a59bf>] ? key_instantiate_and_link+0x42/0x5f [<ffffffff811aa0dc>] call_sbin_request_key+0xe7/0x33b [<ffffffff8139376a>] ? mutex_unlock+0x9/0xb [<ffffffff811a5952>] ? __key_instantiate_and_link+0xb1/0xdc [<ffffffff811a59bf>] ? key_instantiate_and_link+0x42/0x5f [<ffffffff811aa6fa>] ? request_key_auth_new+0x1c2/0x23c [<ffffffff810aaf15>] ? cache_alloc_debugcheck_after+0x108/0x173 [<ffffffff811a9d00>] ? request_key_and_link+0x146/0x300 [<ffffffff810ac568>] ? kmem_cache_alloc+0xe1/0x118 [<ffffffff811a9e45>] request_key_and_link+0x28b/0x300 [<ffffffff811a89ac>] sys_request_key+0xf7/0x14a [<ffffffff81052c0b>] ? trace_hardirqs_on_caller+0x10c/0x130 [<ffffffff81394fb9>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org> 05 May 2010, 13:50:24 UTC
f0641cb David Howells 30 April 2010, 13:32:18 UTC KEYS: Use RCU dereference wrappers in keyring key type code The keyring key type code should use RCU dereference wrappers, even when it holds the keyring's key semaphore. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> 05 May 2010, 13:50:12 UTC
cea7daa Toshiyuki Okajima 30 April 2010, 13:32:13 UTC KEYS: find_keyring_by_name() can gain access to a freed keyring find_keyring_by_name() can gain access to a keyring that has had its reference count reduced to zero, and is thus ready to be freed. This then allows the dead keyring to be brought back into use whilst it is being destroyed. The following timeline illustrates the process: |(cleaner) (user) | | free_user(user) sys_keyctl() | | | | key_put(user->session_keyring) keyctl_get_keyring_ID() | || //=> keyring->usage = 0 | | |schedule_work(&key_cleanup_task) lookup_user_key() | || | | kmem_cache_free(,user) | | . |[KEY_SPEC_USER_KEYRING] | . install_user_keyrings() | . || | key_cleanup() [<= worker_thread()] || | | || | [spin_lock(&key_serial_lock)] |[mutex_lock(&key_user_keyr..mutex)] | | || | atomic_read() == 0 || | |{ rb_ease(&key->serial_node,) } || | | || | [spin_unlock(&key_serial_lock)] |find_keyring_by_name() | | ||| | keyring_destroy(keyring) ||[read_lock(&keyring_name_lock)] | || ||| | |[write_lock(&keyring_name_lock)] ||atomic_inc(&keyring->usage) | |. ||| *** GET freeing keyring *** | |. ||[read_unlock(&keyring_name_lock)] | || || | |list_del() |[mutex_unlock(&key_user_k..mutex)] | || | | |[write_unlock(&keyring_name_lock)] ** INVALID keyring is returned ** | | . | kmem_cache_free(,keyring) . | . | atomic_dec(&keyring->usage) v *** DESTROYED *** TIME If CONFIG_SLUB_DEBUG=y then we may see the following message generated: ============================================================================= BUG key_jar: Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff880197a7e200-0xffff880197a7e200. First byte 0x6a instead of 0x6b INFO: Allocated in key_alloc+0x10b/0x35f age=25 cpu=1 pid=5086 INFO: Freed in key_cleanup+0xd0/0xd5 age=12 cpu=1 pid=10 INFO: Slab 0xffffea000592cb90 objects=16 used=2 fp=0xffff880197a7e200 flags=0x200000000000c3 INFO: Object 0xffff880197a7e200 @offset=512 fp=0xffff880197a7e300 Bytes b4 0xffff880197a7e1f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object 0xffff880197a7e200: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b jkkkkkkkkkkkkkkk Alternatively, we may see a system panic happen, such as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9 PGD 6b2b4067 PUD 6a80d067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/kernel/kexec_crash_loaded CPU 1 ... Pid: 31245, comm: su Not tainted 2.6.34-rc5-nofixed-nodebug #2 D2089/PRIMERGY RIP: 0010:[<ffffffff810e61a3>] [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9 RSP: 0018:ffff88006af3bd98 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88007d19900b RDX: 0000000100000000 RSI: 00000000000080d0 RDI: ffffffff81828430 RBP: ffffffff81828430 R08: ffff88000a293750 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000100000 R12: 00000000000080d0 R13: 00000000000080d0 R14: 0000000000000296 R15: ffffffff810f20ce FS: 00007f97116bc700(0000) GS:ffff88000a280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000001 CR3: 000000006a91c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process su (pid: 31245, threadinfo ffff88006af3a000, task ffff8800374414c0) Stack: 0000000512e0958e 0000000000008000 ffff880037f8d180 0000000000000001 0000000000000000 0000000000008001 ffff88007d199000 ffffffff810f20ce 0000000000008000 ffff88006af3be48 0000000000000024 ffffffff810face3 Call Trace: [<ffffffff810f20ce>] ? get_empty_filp+0x70/0x12f [<ffffffff810face3>] ? do_filp_open+0x145/0x590 [<ffffffff810ce208>] ? tlb_finish_mmu+0x2a/0x33 [<ffffffff810ce43c>] ? unmap_region+0xd3/0xe2 [<ffffffff810e4393>] ? virt_to_head_page+0x9/0x2d [<ffffffff81103916>] ? alloc_fd+0x69/0x10e [<ffffffff810ef4ed>] ? do_sys_open+0x56/0xfc [<ffffffff81008a02>] ? system_call_fastpath+0x16/0x1b Code: 0f 1f 44 00 00 49 89 c6 fa 66 0f 1f 44 00 00 65 4c 8b 04 25 60 e8 00 00 48 8b 45 00 49 01 c0 49 8b 18 48 85 db 74 0d 48 63 45 18 <48> 8b 04 03 49 89 00 eb 14 4c 89 f9 83 ca ff 44 89 e6 48 89 ef RIP [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9 This problem is that find_keyring_by_name does not confirm that the keyring is valid before accepting it. Skipping keyrings that have been reduced to a zero count seems the way to go. To this end, use atomic_inc_not_zero() to increment the usage count and skip the candidate keyring if that returns false. The following script _may_ cause the bug to happen, but there's no guarantee as the window of opportunity is small: #!/bin/sh LOOP=100000 USER=dummy_user /bin/su -c "exit;" $USER || { /usr/sbin/adduser -m $USER; add=1; } for ((i=0; i<LOOP; i++)) do /bin/su -c "echo '$i' > /dev/null" $USER done (( add == 1 )) && /usr/sbin/userdel -r $USER exit Note that the nominated user must not be in use. An alternative way of testing this may be: for ((i=0; i<100000; i++)) do keyctl session foo /bin/true || break done >&/dev/null as that uses a keyring named "foo" rather than relying on the user and user-session named keyrings. Reported-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> 05 May 2010, 13:49:10 UTC
69b5de8 Takashi Iwai 05 May 2010, 08:08:30 UTC Merge branch 'fix/hda' into for-linus 05 May 2010, 08:08:30 UTC
8f0f5ff Daniel T Chen 28 April 2010, 22:00:11 UTC ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) BugLink: https://launchpad.net/bugs/541802 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_cxt5045() for all Packard Bell models. Reported-by: Valombre Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 05 May 2010, 08:01:15 UTC
231f50b Anisse Astier 28 April 2010, 16:05:06 UTC ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 Add a quirk for all-in-one computer Dell Inspiron One 19 Touch to have proper HP and Mic support. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de> 05 May 2010, 08:00:00 UTC
bfe7078 Dan Carpenter 28 April 2010, 08:29:14 UTC ALSA: take tu->qlock with irqs disabled We should disable irqs when we take the tu->qlock because it is used in the irq handler. The only place that doesn't is snd_timer_user_ccallback(). Most of the time snd_timer_user_ccallback() is called with interrupts disabled but the the first ti->ccallback() call in snd_timer_notify1() has interrupts enabled. This was caught by lockdep which generates the following message: > ================================= > [ INFO: inconsistent lock state ] > 2.6.34-rc5 #5 > --------------------------------- > inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. > dolphin/4003 [HC1[1]:SC0[0]:HE0:SE1] takes: > (&(&tu->qlock)->rlock){?.+...}, at: [<f84ec472>] snd_timer_user_tinterrupt+0x28/0x132 [snd_timer] > {HARDIRQ-ON-W} state was registered at: > [<c1048de9>] __lock_acquire+0x654/0x1482 > [<c1049c73>] lock_acquire+0x5c/0x73 > [<c125ac3e>] _raw_spin_lock+0x25/0x34 > [<f84ec370>] snd_timer_user_ccallback+0x55/0x95 [snd_timer] > [<f84ecc4b>] snd_timer_notify1+0x53/0xca [snd_timer] Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 05 May 2010, 07:57:08 UTC
7cff094 Mattias Walström 05 May 2010, 07:55:48 UTC FEC: Fix kernel panic in fec_set_mac_address. Fix memory corruption that sometimes result in kernel panic. Signed-off-by: Mattias Walström <mattias@vmlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net> 05 May 2010, 07:55:48 UTC
back to top