https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
b0c3844 Linux 2.6.37-rc6 16 December 2010, 01:24:48 UTC
c01c810 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h 16 December 2010, 01:24:05 UTC
a4851d8 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix typo which broke '..' detection in ext4_find_entry() ext4: Turn off multiple page-io submission by default 15 December 2010, 20:41:17 UTC
667c78a xen: Provide a variant of __RING_SIZE() that is an integer constant expression Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where this is being used to specify array sizes. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: David Miller <davem@davemloft.net> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2010, 20:34:28 UTC
6c965ff MAINTAINERS: update MSM git tree The MSM main git tree has changed over to this new address. Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2010, 20:31:21 UTC
462e635 install_special_mapping skips security_file_mmap check. The install_special_mapping routine (used, for example, to setup the vdso) skips the security check before insert_vm_struct, allowing a local attacker to bypass the mmap_min_addr security restriction by limiting the available pages for special mappings. bprm_mm_init() also skips the check, and although I don't think this can be used to bypass any restrictions, I don't see any reason not to have the security check. $ uname -m x86_64 $ cat /proc/sys/vm/mmap_min_addr 65536 $ cat install_special_mapping.s section .bss resb BSS_SIZE section .text global _start _start: mov eax, __NR_pause int 0x80 $ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s $ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o $ ./install_special_mapping & [1] 14303 $ cat /proc/14303/maps 0000f000-00010000 r-xp 00000000 00:00 0 [vdso] 00010000-00011000 r-xp 00001000 00:19 2453665 /home/taviso/install_special_mapping 00011000-ffffe000 rwxp 00000000 00:00 0 [stack] It's worth noting that Red Hat are shipping with mmap_min_addr set to 4096. Signed-off-by: Tavis Ormandy <taviso@google.com> Acked-by: Kees Cook <kees@ubuntu.com> Acked-by: Robert Swiecki <swiecki@google.com> [ Changed to not drop the error code - akpm ] Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2010, 20:30:36 UTC
52f6c5a crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h Add missing header file: arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR' arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 15 December 2010, 11:44:08 UTC
0fcdcfb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: It is likely that WORKER_NOT_RUNNING is true MAINTAINERS: Add workqueue entry workqueue: check the allocation of system_unbound_wq 15 December 2010, 02:50:10 UTC
6d5e93c Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: protect against NULL reference when waiting to start a raid10. md: fix bug with re-adding of partially recovered device. md: fix possible deadlock in handling flush requests. md: move code in to submit_flushes. md: remove handling of flush_pending in md_submit_flush_data 15 December 2010, 02:49:40 UTC
3d0b608 dw_spi: Fix missing final read in some polling situations There is a possibility that the last word of a transaction will be lost if data is not ready. Re-read in poll_transfer() to solve this issue when poll_mode is enabled. Verified on SPI touch screen device. Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2010, 02:48:59 UTC
54efdfe i2c_intel_mid: Fix slash in sysfs name This gets caught by the new sanity check code. Instead of the slash use a different symbol. This was originally found by Major Lee who proposed a rather more complex patch which changed the name according to the chip type. On the basis that we are in a late -rc and making Linus grumpy isn't always a good idea (however fun) this is a simple alternative. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2010, 02:46:01 UTC
6d5c3aa ext4: fix typo which broke '..' detection in ext4_find_entry() There should be a check for the NUL character instead of '0'. Fortunately the only thing that cares about this is NFS serving, which is why we didn't notice this in the merge window testing. Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 15 December 2010, 02:45:31 UTC
dbd9fd6 Merge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: wire up accept4 syscall (non-multiplexed path) sh: Enable deprecated IRQ chip APIs for MFD and GPIOLIB drivers. 15 December 2010, 01:37:08 UTC
ec5d043 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks OMAP2+: PM/serial: fix console semaphore acquire during suspend OMAP1: SRAM: fix size for OMAP1611 SoCs arm: omap2: io: fix clk_get() error check arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check omap: nand: remove hardware ECC as default omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD omap: PM debug: fix wake-on-timer debugfs dependency 15 December 2010, 01:36:35 UTC
fc47e67 Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6 Change bcmring Maintainer list. ARM: Update mach-types ARM: 6528/1: Use CTR for the I-cache line size on ARMv7 ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7 ARM: pxa/palm: fix ifdef around gen_nand driver registration ARM: pxa: fix pxa2xx-flash section mismatch ARM: mmp2: remove not used clk_rtc 15 December 2010, 01:36:10 UTC
478b2a3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Write to prom console using indirect buffer. sparc: Delete prom_*getchar(). sparc: Pass buffer pointer all the way down to prom_{get,put}char(). sparc: Do not export prom_nb{get,put}char(). sparc64: Delete prom_setcallback(). sparc64: Unexport prom_service_exists(). sparc: Kill prom devops_{32,64}.c sparc: Remove prom_pathtoinode() sparc64: Delete prom_puts() unused. SPARC/LEON: removed constant timer initialization as if HZ=100, now it reflects the value of HZ 15 December 2010, 01:34:00 UTC
b4fe2a0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits) pppoe.c: Fix kernel panic caused by __pppoe_xmit WAN: Fix a TX IRQ causing BUG() in PC300 and PCI200SYN drivers. bnx2x: Advance a version number to 1.60.01-0 bnx2x: Fixed a compilation warning bnx2x: LSO code was broken on BE platforms qlge: Fix deadlock when cancelling worker. net: fix skb_defer_rx_timestamp() cxgb4vf: Ingress Queue Entry Size needs to be 64 bytes phy: add the IC+ IP1001 driver atm: correct sysfs 'device' link creation and parent relationships MAINTAINERS: remove me from tulip SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped address enic: Bug Fix: Pass napi reference to the isr that services receive queue ipv6: fix nl group when advertising a new link connector: add module alias net: Document the kernel_recvmsg() function r8169: Fix runtime power management hso: IP checksuming doesn't work on GE0301 option cards xfrm: Fix xfrm_state_migrate leak net: Convert netpoll blocking api in bonding driver to be a counter ... 15 December 2010, 01:33:40 UTC
85cb7f1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] hpsa: fix redefinition of PCI_DEVICE_ID_CISSF [SCSI] qla2xxx: Update version number to 8.03.05-k0. [SCSI] qla2xxx: Properly set the return value in qla2xxx_eh_abort function. [SCSI] qla2xxx: Correct issue where NPIV-config data was not being allocated for 82xx parts. [SCSI] qla2xxx: Change MSI initialization from using incorrect request_irq parameter. [SCSI] qla2xxx: Populate Command Type 6 LUN field properly. [SCSI] zfcp: Issue FCP command without holding SCSI host_lock [SCSI] zfcp: Prevent usage w/o holding a reference [SCSI] zfcp: No ERP escalation on gpn_ft eval [SCSI] zfcp: Correct false abort data assignment. [SCSI] zfcp: Fix common FCP request reception [SCSI] Eliminate error handler overload of the SCSI serial number [SCSI] pmcraid: disable msix and expand device config entry [SCSI] bsg: correct fault if queue object removed while dev_t open [SCSI] osd: checking NULL instead of ERR_PTR() 15 December 2010, 01:32:56 UTC
3373c3d Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdboc,input: Fix regression with keyboard release key and early debugging 14 December 2010, 22:35:04 UTC
3907969 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / PM: Do not save/restore NVS on Sony Vaio VGN-NW130D ACPI/HEST: adjust section selection ACPI: eliminate unused variable warning for !ACPI_SLEEP ACPI/PNP: avoid section mismatch warning ACPI thermal: remove two unused functions ACPI: fix a section mismatch ACPI, APEI, use raw spinlock in ERST ACPI: video: fix build for CONFIG_ACPI=n ACPI: video: fix build for VIDEO_OUTPUT_CONTROL=n ACPI: fix allowing to add/remove multiple _OSI strings acpi: fix _OSI string setup regression ACPI: EC: Add another dmi match entry for MSI hardware ACPI battery: update status upon sysfs query ACPI ac: update AC status upon sysfs query ACPI / PM: Do not refcount power resources that can't be turned on ACPI / PM: Check device state before refcounting power resources 14 December 2010, 22:33:33 UTC
66ef6aa Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: recognize ARAT on WSM-EX 14 December 2010, 22:33:13 UTC
85b093b ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix Cache ownership must be acquired by reading/writing data from the cache line to make cache operation have the desired effect on the SMP MPCore CPU. However, the ownership is never acquired in the v6_dma_inv_range function when cleaning the first line and flushing the last one, in case the address is not aligned to D_CACHE_LINE_SIZE boundary. Fix this by reading/writing data if needed, before performing cache operations. While at it, fix v6_dma_flush_range to prevent RWFO outside the buffer. Cc: stable@kernel.org Signed-off-by: Valentine Barshak <vbarshak@mvista.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 14 December 2010, 22:23:34 UTC
593c252 ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL Because the nwfpe support is unlikely to be used on new platforms and requires CONFIG_OABI_COMPAT, which is not generally used with ARMv7+, we shouldn't expect to build nwfpe support into a Thumb-2 kernel. At present, nwfpe contains assembly code which isn't Thumb-2 compatible, and for now it doesn't appear useful to port this code. All ARMv7-A/R platforms necessarily have VFPv3 hardware floating- point natively, making emulation unnecessary. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 14 December 2010, 22:23:34 UTC
6e6fc99 ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6 This makes sense, because Thumb-2 code can't execute on plain ARMv6 processors. This will avoid accidentally configuring a broken kernel where the config otherwise would allow multiple architecture versions to coexist in the same kernel. Not adding !CPU_V5 etc., because the chance of anyone trying to put v5 and v7 in the same kernel is low, and I'm not aware of any mach which can do this. These could be added later if it matters. Note that the rules may need to be refined if support for the ARM1156J(F)-S processor is later added to the kernel, since this processor supports the rare ARMv6T2 extensions, which add support for Thumb-2 and a few other ARMv7 features. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 14 December 2010, 22:23:33 UTC
d6db466 Change bcmring Maintainer list. I am Jiandong Zheng working on BCMRING in Broadcom Canada Ltd. I am replacing Leo Chen (leochen@broadcom.com) as "ARM/BCMRING ARM ARCHITECTURE" and "ARM/BCMRING MTD NAND DRIVER" maintainer from Broadcom as he is no longer the maintainer of these components. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 14 December 2010, 21:58:02 UTC
1c00802 Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fbdev: Fix fb_find_nearest_mode refresh comparison 14 December 2010, 21:37:12 UTC
dc99bf7 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (ltc4215) make sysfs file match the alarm cause 14 December 2010, 21:36:26 UTC
5d43a1d Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: at_hdmac: fix buffer transfer size specification fsldma: fix issue of slow dma dmaengine i.MX SDMA: initialize on module_init dma : EG20T PCH: Fix miss-setting DMA descriptor intel_mid_dma: fix section mismatch warnings dmaengine: imx-sdma: fix bug in buffer descriptor initialization drivers/dma/ppc4xx: Use printf extension %pR for struct resource drivers/dma/ioat: Use the ccflag-y instead of EXTRA_CFLAGS drivers/dma/: Use the ccflag-y instead of EXTRA_CFLAGS dma: intel_mid_dma: fix double free on mid_setup_dma error path dma: imx-dma: fix imxdma_probe error path 14 December 2010, 21:35:47 UTC
7103b71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Handle large number of entries in poll CQ 14 December 2010, 21:34:25 UTC
a49cd5f Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix regression with Agere FW643 rev 06, disable MSI firewire: ohci: fix regression with VIA VT6315, disable MSI 14 December 2010, 21:33:52 UTC
353495a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: tps6586x: correct register table regulator: tps6586x: Handle both enable reg/bits being the same regulator: tps6586x: Fix TPS6586X_DVM to store goreg/bit regulator: tps6586x: Add missing bit mask generation 14 December 2010, 21:33:21 UTC
f9ae3e1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Quirk for Dell Vostro 320 to make microphone work ALSA: hda - Reset sample sizes and max bitrates when reading ELD ALSA: hda - Always allow basic audio irrespective of ELD info ALSA: hda - Do not wrongly restrict min_channels based on ELD ASoC: Correct WM8962 interrupt mask register read ASoC: WM8580: Debug BCLK and sample size ASoC: Fix resource leak if soc_register_ac97_dai_link failed ASoC: Hold client_mutex while calling snd_soc_instantiate_cards() ASoC: Fix swap of left and right channels for WM8993/4 speaker boost gain ASoC: Fix off by one error in WM8994 EQ register bank size ALSA: hda: Use position_fix=1 for Acer Aspire 5538 to enable capture on internal mic ALSA: hda - Enable jack sense for Thinkpad Edge 13 ALSA: hda - Fix ThinkPad T410[s] docking station line-out ALSA: hda: Use model=lg quirk for LG P1 Express to enable playback and capture 14 December 2010, 21:32:40 UTC
6371e82 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix interleaving check EDAC: Correct MiB_TO_PAGES() macro EDAC: Fix workqueue-related crashes 14 December 2010, 21:32:19 UTC
c3606c6 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: don't apply 7xx HDP flush workaround on AGP drm: use after free in drm_queue_vblank_event() drm/kms: remove spaces from connector names (v2) 14 December 2010, 21:31:49 UTC
d5f04ff Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (adm1026) Allow 1 as a valid divider value hwmon: (adm1026) Fix setting fan_div hwmon: (it87) Fix manual fan speed control on IT8721F 14 December 2010, 21:31:23 UTC
1449032 ext4: Turn off multiple page-io submission by default Jon Nelson has found a test case which causes postgresql to fail with the error: psql:t.sql:4: ERROR: invalid page header in block 38269 of relation base/16384/16581 Under memory pressure, it looks like part of a file can end up getting replaced by zero's. Until we can figure out the cause, we'll roll back the change and use block_write_full_page() instead of ext4_bio_write_page(). The new, more efficient writing function can be used via the mount option mblk_io_submit, so we can test and fix the new page I/O code. To reproduce the problem, install postgres 8.4 or 9.0, and pin enough memory such that the system just at the end of triggering writeback before running the following sql script: begin; create temporary table foo as select x as a, ARRAY[x] as b FROM generate_series(1, 10000000 ) AS x; create index foo_a_idx on foo (a); create index foo_b_idx on foo USING GIN (b); rollback; If the temporary table is created on a hard drive partition which is encrypted using dm_crypt, then under memory pressure, approximately 30-40% of the time, pgsql will issue the above failure. This patch should fix this problem, and the problem will come back if the file system is mounted with the mblk_io_submit mount option. Reported-by: Jon Nelson <jnelson@jamponi.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 14 December 2010, 20:27:50 UTC
5111711 Merge branch 'for-2.6.37' of git://linux-nfs.org/~bfields/linux * 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: nfsd: Fix possible BUG_ON firing in set_change_info sunrpc: prevent use-after-free on clearing XPT_BUSY 14 December 2010, 19:09:05 UTC
e13cf63 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: prevent RAID level downgrades when space is low Btrfs: account for missing devices in RAID allocation profiles Btrfs: EIO when we fail to read tree roots Btrfs: fix compiler warnings Btrfs: Make async snapshot ioctl more generic Btrfs: pwrite blocked when writing from the mmaped buffer of the same page Btrfs: Fix a crash when mounting a subvolume Btrfs: fix sync subvol/snapshot creation Btrfs: Fix page leak in compressed writeback path Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots Btrfs: fixup return code for btrfs_del_orphan_item Btrfs: do not do fast caching if we are allocating blocks for tree_root Btrfs: deal with space cache errors better Btrfs: fix use after free in O_DIRECT 14 December 2010, 19:08:13 UTC
073f21a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: verify ioctl retries fuse: fix ioctl when server is 32bit 14 December 2010, 19:07:39 UTC
497b5b1 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: log timestamp changes to the source inode in rename 14 December 2010, 19:06:17 UTC
e97b71d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix ioctl magic ceph: Behave better when handling file lock replies. ceph: pass lock information by struct file_lock instead of as individual params. ceph: Handle file locks in replies from the MDS. ceph: avoid possible null deref in readdir after dir llseek 14 December 2010, 19:02:15 UTC
38971ce Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix panic after nfs_umount() nfs: remove extraneous and problematic calls to nfs_clear_request nfs: kernel should return EPROTONOSUPPORT when not support NFSv4 NFS: Fix fcntl F_GETLK not reporting some conflicts nfs: Discard ACL cache on mode update NFS: Readdir cleanups NFS: nfs_readdir_search_for_cookie() don't mark as eof if cookie not found NFS: Fix a memory leak in nfs_readdir Call the filesystem back whenever a page is removed from the page cache NFS: Ensure we use the correct cookie in nfs_readdir_xdr_filler 14 December 2010, 16:51:12 UTC
caa4a59 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: remove bogus remapping of error in cifs_filldir() cifs: allow calling cifs_build_path_to_root on incomplete cifs_sb cifs: fix check of error return from is_path_accessable cifs: remove Local_System_Name cifs: fix use of CONFIG_CIFS_ACL cifs: add attribute cache timeout (actimeo) tunable 14 December 2010, 16:49:15 UTC
2d64672 workqueue: It is likely that WORKER_NOT_RUNNING is true Running the annotate branch profiler on three boxes, including my main box that runs firefox, evolution, xchat, and is part of the distcc farm, showed this with the likelys in the workqueue code: correct incorrect % Function File Line ------- --------- - -------- ---- ---- 96 996253 99 wq_worker_sleeping workqueue.c 703 96 996247 99 wq_worker_waking_up workqueue.c 677 The likely()s in this case were assuming that WORKER_NOT_RUNNING will most likely be false. But this is not the case. The reason is (and shown by adding trace_printks and testing it) that most of the time WORKER_PREP is set. In worker_thread() we have: worker_clr_flags(worker, WORKER_PREP); [ do work stuff ] worker_set_flags(worker, WORKER_PREP, false); (that 'false' means not to wake up an idle worker) The wq_worker_sleeping() is called from schedule when a worker thread is putting itself to sleep. Which happens most of the time outside of that [ do work stuff ]. The wq_worker_waking_up is called by the wakeup worker code, which is also callod outside that [ do work stuff ]. Thus, the likely and unlikely used by those two functions are actually backwards. Remove the annotation and let gcc figure it out. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Tejun Heo <tj@kernel.org> 14 December 2010, 14:05:54 UTC
3e6cd7a MAINTAINERS: Add workqueue entry Signed-off-by: Tejun Heo <tj@kernel.org> 14 December 2010, 14:05:45 UTC
e504b84 fbdev: Fix fb_find_nearest_mode refresh comparison Refresh rate nearness is not calculated or reset when nearest resolution changes. This patch resets the refresh rate differential measurement whenever a new nearest resolution is discovered. This fixes two error cases; first, wherein the first mode's refresh rate differential is never calculated and second, when the closest refresh rate from a previous nearest resolution is erroneously preserved. Signed-off-by: Andrew Kephart <andrew.kephart@alereon.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 14 December 2010, 09:03:49 UTC
21b6e4c sh: wire up accept4 syscall (non-multiplexed path) Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 14 December 2010, 08:58:10 UTC
59a609d dmaengine: at_hdmac: fix buffer transfer size specification Buffer transfer size is the number of transfers to be performed in relation with the width of the _source_ interface. So in the DMA_FROM_DEVICE case, it should be the register width that should be taken into account. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 14 December 2010, 08:39:29 UTC
8863ada kgdboc,input: Fix regression with keyboard release key and early debugging The commit 111c182340cd22e238ab1cc6564df336c6ebd7cb (kgdboc: reset input devices (keyboards) when exiting debugger) introduced a regression in early debugging such that you get a kernel oops on continue (with the go command) if you boot a kernel with: earlyprintk=vga ekgdboc=kbd kgdbwait The restore kgdboc_restore_input() routine schedules work for the purpose of sending key release events for any keys that were in the depressed state prior to entering the kernel debugger. A simple fix to the crash is to not invoke the schedule_work() if the kernel system_state is anything other than SYSTEM_RUNNING. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> 14 December 2010, 04:44:03 UTC
23437b5 Merge branch 'bugzilla-23002' into release 14 December 2010, 03:40:54 UTC
291a73c ACPI / PM: Do not save/restore NVS on Sony Vaio VGN-NW130D The saving of the NVS memory area during suspend and restoring it during resume causes problems to appear on Sony Vaio VGN-NW130D, so blacklist that machine to avoid those problems. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=23002 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Adriano <adriano.vilela@yahoo.com> Signed-off-by: Len Brown <len.brown@intel.com> 14 December 2010, 03:40:38 UTC
83a50de Btrfs: prevent RAID level downgrades when space is low The extent allocator has code that allows us to fill allocations from any available block group, even if it doesn't match the raid level we've requested. This was put in because adding a new drive to a filesystem made with the default mkfs options actually upgrades the metadata from single spindle dup to full RAID1. But, the code also allows us to allocate from a raid0 chunk when we really want a raid1 or raid10 chunk. This can cause big trouble because mkfs creates a small (4MB) raid0 chunk for data and metadata which then goes unused for raid1/raid10 installs. The allocator will happily wander in and allocate from that chunk when things get tight, which is not correct. The fix here is to make sure that we provide duplication when the caller has asked for it. It does all the dups to be any raid level, which preserves the dup->raid1 upgrade abilities. Signed-off-by: Chris Mason <chris.mason@oracle.com> 14 December 2010, 01:07:01 UTC
cd02dca Btrfs: account for missing devices in RAID allocation profiles When we mount in RAID degraded mode without adding a new device to replace the failed one, we can end up using the wrong RAID flags for allocations. This results in strange combinations of block groups (raid1 in a raid10 filesystem) and corruptions when we try to allocate blocks from single spindle chunks on drives that are actually missing. The first device has two small 4MB chunks in it that mkfs creates and these are usually unused in a raid1 or raid10 setup. But, in -o degraded, the allocator will fall back to these because the mask of desired raid groups isn't correct. The fix here is to count the missing devices as we build up the list of devices in the system. This count is used when picking the raid level to make sure we continue using the same levels that were in place before we lost a drive. Signed-off-by: Chris Mason <chris.mason@oracle.com> 14 December 2010, 01:06:52 UTC
f3c677b fsldma: fix issue of slow dma Fixed fsl dma slow issue by initializing dma mode register with bandwidth control. It boosts dma performance and should works with 85xx board. Signed-off-by: Forrest Shi <b29237@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 13 December 2010, 22:05:27 UTC
68433b7 Btrfs: EIO when we fail to read tree roots If we just get a plain IO error when we read tree roots, the code wasn't properly sending that error up the chain. This allowed mounts to continue when they should failed, and allowed operations on partially setup root structs. The end result was usually oopsen on spinlocks that hadn't been spun up correctly. Signed-off-by: Chris Mason <chris.mason@oracle.com> 13 December 2010, 19:47:58 UTC
0a6bf65 hwmon: (ltc4215) make sysfs file match the alarm cause The ltc4215 driver used the chip's "power good" status bit to provide the power1_alarm file. This is wrong: the chip is really reporting the status of one of the monitored voltages. Change the sysfs file from power1_alarm to in2_min_alarm instead. This matches the voltage that the chip is raising an alarm for. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 13 December 2010, 17:54:50 UTC
80fbf83 sh: Enable deprecated IRQ chip APIs for MFD and GPIOLIB drivers. There are still quite a number of MFD and GPIO expander drivers that are using the old irq_chip APIs that haven't had a chance to update during the .37 cycle, resulting in allyes/modconfig errors on some configurations. Mark Brown has done most of the legwork to get these fixed up in .38, so this should just be a .37 stop-gap that we can drop at the end of the .38 merge window. Reported-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 13 December 2010, 05:59:51 UTC
819c1a6 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 12 December 2010, 23:45:39 UTC
440e2e4 ARM: Update mach-types Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 12 December 2010, 23:31:02 UTC
da30e0a ARM: 6528/1: Use CTR for the I-cache line size on ARMv7 The current implementation of the v7_coherent_*_range function assumes that the D and I cache lines have the same size, which is incorrect architecturally. This patch adds the icache_line_size macro which reads the CTR register. The main loop in v7_coherent_*_range is split in two independent loops or the D and I caches. This also has the performance advantage that the DSB is moved outside the main loop. Reported-by: Kevin Sapp <ksapp@quicinc.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 12 December 2010, 23:25:58 UTC
f91e2c3 ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7 The current implementation of the dcache_line_size macro reads the L1 cache size from the CCSIDR register. This, however, is not guaranteed to be the smallest cache line in the cache hierarchy. The patch changes to the macro to use the more architecturally correct CTR register. Reported-by: Kevin Sapp <ksapp@quicinc.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 12 December 2010, 23:25:58 UTC
2a27a03 pppoe.c: Fix kernel panic caused by __pppoe_xmit __pppoe_xmit function return value was invalid resulting in additional call to kfree_skb on already freed skb. This resulted in memory corruption and consequent kernel panic after PPPoE peer terminated the link. This fixes commit 55c95e738da85373965cb03b4f975d0fd559865b. Reported-by: Gorik Van Steenberge <gvs@zemos.net> Reported-by: Daniel Kenzelmann <kernel.bugzilla@kenzelmann.dyndns.info> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Reported-by: Pawel Staszewski <pstaszewski@artcom.pl> Diagnosed-by: Andrej Ota <andrej@ota.si> Diagnosed-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Tested-by: Pawel Staszewski <pstaszewski@artcom.pl> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Andrej Ota <andrej@ota.si> Signed-off-by: David S. Miller <davem@davemloft.net> 12 December 2010, 23:06:16 UTC
eaff945 WAN: Fix a TX IRQ causing BUG() in PC300 and PCI200SYN drivers. We must not wake the TX queue without free TX descriptors. sca_xmit() expects at least one free descriptor and BUGs otherwise. Problem reported and fix tested by Bernie Innocenti and Ward Vandewege. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 12 December 2010, 23:03:00 UTC
9f54496 bnx2x: Advance a version number to 1.60.01-0 Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 December 2010, 23:02:59 UTC
372e43e bnx2x: Fixed a compilation warning bnx2x_src_init_t2() is used only when BCM_CNIC is defined. So, to avoid a compilation warning, we won't define it unless BCM_CNIC is defined. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 December 2010, 23:02:58 UTC
099978b bnx2x: LSO code was broken on BE platforms Make the LSO code work on BE platforms: parsing_data field of a parsing BD (PBD) for 57712 was improperly composed which made FW read wrong values for TCP header's length and offset and, as a result, the corresponding PCI device was performing bad DMA reads triggering EEH. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 December 2010, 23:02:58 UTC
4d7b6b5 qlge: Fix deadlock when cancelling worker. Removing usage of rtnl_lock() to protect firmware interface registers. These registers are accessed in some worker threads and can create a deadlock if rtnl_lock is taken by upper layers while the worker is still pending. We remove rtnl_lock and use a driver mutex just while mailboxes are accessed. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 December 2010, 23:02:57 UTC
36eac21 Merge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 12 December 2010, 22:16:51 UTC
9993e0f firewire: ohci: fix regression with Agere FW643 rev 06, disable MSI Agere FW643 rev 06, listed as "11c1:5901 (rev 06) (prog-if 10 [OHCI])", produced SBP-2 I/O errors since kernel 2.6.36. Disabling MSI fixes it. Since MSI work on Agere FW643-E (same vendor and device ID, but rev 07), introduce a device revision field into firewire-ohci's quirks list so that different quirks can be defined for older and newer revisions. Reported-by: Jonathan Isom <jeisom@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.36.y 12 December 2010, 14:47:02 UTC
af0cdf4 firewire: ohci: fix regression with VIA VT6315, disable MSI "VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403]" does not generate any interrupts if Message Signaled Interrupts were enabled. This is a regression since kernel 2.6.36 in which MSI support was added to firewire-ohci. Hence blacklist MSI on all VIA controllers. Reported-by: Robin Cook <rcook@wyrms.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.36.y 12 December 2010, 14:47:02 UTC
6cc5615 Merge branches 'bugzilla-15418', 'bugzilla-21722', 'bugzilla-22932', 'misc-2.6.37' and 'osi-regression' into release 11 December 2010, 07:02:02 UTC
bec4f22 ACPI/HEST: adjust section selection Properly const-, __init-, and __read_mostly-annotate this code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:48 UTC
091aad6 ACPI: eliminate unused variable warning for !ACPI_SLEEP Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:48 UTC
66c3ec4 ACPI/PNP: avoid section mismatch warning Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:47 UTC
b904759 ACPI thermal: remove two unused functions When CONFIG_CPU_FREQ=n ... drivers/acpi/processor_thermal.c:159:12: warning: ‘acpi_thermal_cpufreq_increase’ defined but not used drivers/acpi/processor_thermal.c:163:12: warning: ‘acpi_thermal_cpufreq_decrease’ defined but not used Remove unused declaration of ‘acpi_thermal_cpufreq_increase’ and ‘acpi_thermal_cpufreq_decrease’ Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:47 UTC
32d47ee ACPI: fix a section mismatch WARNING: drivers/acpi/acpi.o(.text+0xeda): Section mismatch in reference from the function acpi_os_initialize1() to the function .init.text:set_osi_linux() The function acpi_os_initialize1() references the function __init set_osi_linux(). Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:47 UTC
3b38bb5 ACPI, APEI, use raw spinlock in ERST ERST writing may be used in NMI or Machine Check Exception handler. So it need to use raw spinlock instead of normal spinlock. This patch fixes it. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:46 UTC
b72512e ACPI: video: fix build for CONFIG_ACPI=n In file included from drivers/gpu/drm/i915/intel_opregion.c:30: include/acpi/video.h:22: warning: ‘struct acpi_device’ declared inside parameter list ... include/acpi/video.h:24: error: ‘ENODEV’ undeclared (first use in this function) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:46 UTC
3353beb ACPI: video: fix build for VIDEO_OUTPUT_CONTROL=n drivers/built-in.o: In function `acpi_video_bus_put_devices': video.c:(.text+0x79663): undefined reference to `video_output_unregister' drivers/built-in.o: In function `acpi_video_bus_add': video.c:(.text+0x7b0b3): undefined reference to `video_output_register' Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 07:01:35 UTC
12d3206 ACPI: fix allowing to add/remove multiple _OSI strings commit b0ed7a91(ACPICA/ACPI: Add new host interfaces for _OSI suppor) introduced another regression that only one _OSI string can be added or removed. Now multiple _OSI strings can be added or removed, for example acpi_osi=Linux acpi_osi=FreeBSD acpi_osi="!Windows 2006" Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 06:31:01 UTC
d90aa92 acpi: fix _OSI string setup regression commit b0ed7a91(ACPICA/ACPI: Add new host interfaces for _OSI suppor) introduced a regression that _OSI string setup fails. There are 2 paths to setup _OSI string. DMI: acpi_dmi_osi_linux -> set_osi_linux -> acpi_osi_setup -> copy _OSI string to osi_setup_string Boot command line: acpi_osi_setup -> copy _OSI string to osi_setup_string Later, acpi_osi_setup_late will be called to handle osi_setup_string. If _OSI string is "Linux" or "!Linux", then the call path is, acpi_osi_setup_late -> acpi_cmdline_osi_linux -> set_osi_linux -> acpi_osi_setup -> copy _OSI string to osi_setup_string This actually never installs _OSI string(acpi_install_interface not called), but just copy the _OSI string to osi_setup_string. This patch fixes the regression. Reported-and-tested-by: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 11 December 2010, 06:28:58 UTC
c2015dc OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks After Charu's GPIO hwmod patches, GPIO initialization on N800 emits the following messages for all GPIO banks: omap_hwmod: gpio1: cannot be enabled (3) This is due to OMAP24XX_ST_GPIOS_SHIFT being defined as a bitmask. Fix this and also fix two other macros that had the same problem. Thanks to Tony Lindgren <tony@atomide.com> for originally reporting this bug. Signed-off-by: Paul Walmsley <paul@pwsan.com Cc: Charulatha Varadarajan <charu@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 11 December 2010, 02:04:43 UTC
a19faf0 net: fix skb_defer_rx_timestamp() After commit c1f19b51d1d8 (net: support time stamping in phy devices.), kernel might crash if CONFIG_NETWORK_PHY_TIMESTAMPING=y and skb_defer_rx_timestamp() handles a packet without an ethernet header. Fixes kernel bugzilla #24102 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=24102 Reported-and-tested-by: Andrew Watts <akwatts@ymail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 December 2010, 00:20:56 UTC
c710245 cxgb4vf: Ingress Queue Entry Size needs to be 64 bytes Was using L1_CACHE_BYTES for the Ingress Queue Entry Size but it really needs to be 64 bytes in order to support the largest message sizes. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 23:49:33 UTC
377ecca phy: add the IC+ IP1001 driver This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver. I've had to add an additional delay (2ns) to adjust RX clock phase at GMII/ RGMII interface (according to the PHY data-sheet). This helps to have the RGMII working on some ST platforms. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 23:48:43 UTC
d9ca676 atm: correct sysfs 'device' link creation and parent relationships The ATM subsystem was incorrectly creating the 'device' link for ATM nodes in sysfs. This led to incorrect device/parent relationships exposed by sysfs and udev. Instead of rolling the 'device' link by hand in the generic ATM code, pass each ATM driver's bus device down to the sysfs code and let sysfs do this stuff correctly. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 23:45:05 UTC
fb890ae MAINTAINERS: remove me from tulip It was a nice idea, but -ENOTIME and -ENOHW. I never got around to doing a lot of the clean up that I intended to. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 23:43:30 UTC
40a0103 SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped address SCTP_SET_PEER_PRIMARY_ADDR does not accpet v4mapped address, using v4mapped address in SCTP_SET_PEER_PRIMARY_ADDR socket option will get -EADDRNOTAVAIL error if v4map is enabled. This patch try to fix it by mapping v4mapped address to v4 address if allowed. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 23:29:49 UTC
79aeec5 enic: Bug Fix: Pass napi reference to the isr that services receive queue Pass reference to napi instead of enic device to the isr that services receive queue. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 23:01:07 UTC
3dd1462 Btrfs: fix compiler warnings ... regarding an unused function when !MIGRATION, and regarding a printk() format string vs argument mismatch. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 10 December 2010, 21:29:11 UTC
fdfb1e4 Btrfs: Make async snapshot ioctl more generic If we had reserved some bytes in struct btrfs_ioctl_vol_args, we wouldn't have to create a new structure for async snapshot creation. Here we convert async snapshot ioctl to use a more generic ABI, as we'll add more ioctls for snapshots/subvolumes in the future, readonly snapshots for example. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 10 December 2010, 21:29:11 UTC
914ee29 Btrfs: pwrite blocked when writing from the mmaped buffer of the same page This problem is found in meego testing: http://bugs.meego.com/show_bug.cgi?id=6672 A file in btrfs is mmaped and the mmaped buffer is passed to pwrite to write to the same page of the same file. In btrfs_file_aio_write(), the pages is locked by prepare_pages(). So when btrfs_copy_from_user() is called, page fault happens and the same page needs to be locked again in filemap_fault(). The fix is to move iov_iter_fault_in_readable() before prepage_pages() to make page fault happen before pages are locked. And also disable page fault in critical region in btrfs_copy_from_user(). Reviewed-by: Yan, Zheng<zheng.z.yan@intel.com> Signed-off-by: Zhong, Xin <xin.zhong@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 10 December 2010, 21:29:10 UTC
f106e82 Btrfs: Fix a crash when mounting a subvolume We should drop dentry before deactivating the superblock, otherwise we can hit this bug: BUG: Dentry f349a690{i=100,n=/} still in use (1) [unmount of btrfs loop1] ... Steps to reproduce the bug: # mount /dev/loop1 /mnt # mkdir save # btrfs subvolume snapshot /mnt save/snap1 # umount /mnt # mount -o subvol=save/snap1 /dev/loop1 /mnt (crash) Reported-by: Michael Niederle <mniederle@gmx.at> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 10 December 2010, 21:29:10 UTC
75eaa0e Btrfs: fix sync subvol/snapshot creation We were incorrectly taking the async path even for the sync ioctls by passing in &transid unconditionally. There's ample room for further cleanup here, but this keeps the fix simple. Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 10 December 2010, 21:29:10 UTC
24ae636 Btrfs: Fix page leak in compressed writeback path "start + num_bytes >= actual_end" can happen when compressed page writeback races with file truncation. In that case we need unlock and release pages past the end of file. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 10 December 2010, 21:29:09 UTC
84cd948 Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots Not being able to delete an orphan item isn't a horrible thing. The worst that happens is the next time around we try and do the orphan cleanup and we can't find the referenced object and just delete the item and move on. Signed-off-by: Josef Bacik <josef@redhat.com> 10 December 2010, 21:29:04 UTC
e91db5c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 10 December 2010, 20:51:02 UTC
5f75a10 ipv6: fix nl group when advertising a new link New idev are advertised with NL group RTNLGRP_IPV6_IFADDR, but should use RTNLGRP_IPV6_IFINFO. Bug was introduced by commit 8d7a76c9. Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 20:49:36 UTC
3700c3c connector: add module alias Since connector can be built as a module and uses netlink socket to communicate. The module should have an alias to autoload when socket of NETLINK_CONNECTOR type is requested. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 20:27:49 UTC
c1249c0 net: Document the kernel_recvmsg() function Signed-off-by: Martin Lucina <mato@kotelna.sk> Signed-off-by: David S. Miller <davem@davemloft.net> 10 December 2010, 19:13:18 UTC
back to top