Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
d683b96 Linus Torvalds 02 June 2013, 08:11:17 UTC Linux 3.10-rc4 02 June 2013, 08:11:17 UTC
cc86397 Linus Torvalds 01 June 2013, 21:24:54 UTC Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "This patcheset includes fixes for: - the PCI/LBA which brings back the stifb graphics framebuffer console - possible memory overflows in parisc kernel init code - parport support on older GSC machines - avoids that users by mistake enable PARPORT_PC_SUPERIO on parisc - MAINTAINERS file list updates for parisc." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: parport0: fix this legacy no-device port driver! parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) parisc/PCI: Set type for LBA bus_num resource MAINTAINERS: update parisc architecture file list parisc: kernel: using strlcpy() instead of strcpy() parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 parisc: memory overflow, 'name' length is too short for using 01 June 2013, 21:24:54 UTC
4edb386 Helge Deller 30 May 2013, 21:06:39 UTC parisc: parport0: fix this legacy no-device port driver! Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:46:42 UTC
c218c71 Helge Deller 30 May 2013, 16:24:46 UTC parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:45:34 UTC
b204a4d Helge Deller 31 May 2013, 22:24:58 UTC parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) commit dc7dce280a Author: Bjorn Helgaas <bhelgaas@google.com> Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> 01 June 2013, 12:44:25 UTC
b47d493 Bjorn Helgaas 30 May 2013, 17:45:39 UTC parisc/PCI: Set type for LBA bus_num resource The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:43:02 UTC
2b6bac9 Helge Deller 30 May 2013, 13:48:07 UTC MAINTAINERS: update parisc architecture file list Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:37:19 UTC
ea99b1a Chen Gang 30 May 2013, 01:18:43 UTC parisc: kernel: using strlcpy() instead of strcpy() 'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:29:01 UTC
7660390 Paul Bolle 29 May 2013, 09:56:58 UTC parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:28:47 UTC
ae249b5 Helge Deller 28 May 2013, 20:35:54 UTC parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:28:35 UTC
3f108de Chen Gang 27 May 2013, 04:57:09 UTC parisc: memory overflow, 'name' length is too short for using 'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Helge Deller <deller@gmx.de> 01 June 2013, 12:27:56 UTC
aa3ae6d Linus Torvalds 01 June 2013, 11:13:16 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are a few more fixes for powerpc 3.10. It's a bit more than I would have liked this late in the game but I suppose that's what happens with a brand new chip generation coming out. A few regression fixes, some last minute fixes for new P8 features such as transactional memory,... There's also one powerpc KVM patch that I requested that adds two missing functions to our in-kernel interrupt controller support which is itself a new 3.10 feature. These are defined by the base hypervisor specification. We didn't implement them originally because Linux doesn't use them but they are simple and I'm not comfortable having a half-implemented interface in 3.10 and having to deal with versionning etc... later when something starts needing those calls. They cannot be emulated in qemu when using in-kernel interrupt controller (not enough shared state). Just added a last minute patch to fix a typo introducing a breakage in our cputable for Power7+ processors, sorry about that, but the regression it fixes just hurt me :-)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/cputable: Fix typo on P7+ cputable entry powerpc/perf: Add missing SIER support powerpc/perf: Revert to original NO_SIPR logic powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation powerpc/32bit:Store temporary result in r0 instead of r8 powerpc/mm: Always invalidate tlb on hpte invalidate and update powerpc/pseries: Improve stream generation comments in copypage/user powerpc/pseries: Kill all prefetch streams on context switch powerpc/cputable: Fix oprofile_cpu_type on power8 powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions powerpc/tm: Move TM abort cause codes to uapi powerpc/tm: Abort on emulation and alignment faults powerpc/tm: Update cause codes documentation powerpc/tm: Make room for hypervisor in abort cause codes 01 June 2013, 11:13:16 UTC
008bd2d Linus Torvalds 01 June 2013, 11:05:20 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi target fixes from Nicholas Bellinger: "The highlights include: - Re-instate sess->wait_list in target_wait_for_sess_cmds() for active I/O shutdown handling in fabrics using se_cmd->cmd_kref - Make ib_srpt call target_sess_cmd_list_set_waiting() during session shutdown - Fix FILEIO off-by-one READ_CAPACITY bug for !S_ISBLK export - Fix iscsi-target login error heap buffer overflow (Kees) - Fix iscsi-target active I/O shutdown handling regression in v3.10-rc1 A big thanks to Kees Cook for fixing a long standing login error buffer overflow bug. All patches are CC'ed to stable with the exception of the v3.10-rc1 specific regression + other minor target cleanup." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling target: Propigate up ->cmd_kref put return via transport_generic_free_cmd iscsi-target: fix heap buffer overflow on error target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session target: Re-instate sess_wait_list for target_wait_for_sess_cmds target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds 01 June 2013, 11:05:20 UTC
0f7dafd Linus Torvalds 01 June 2013, 10:55:26 UTC Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux Pull clock subsystem fixes from Mike Turquette: "A mix of small fixes affecting mostly ARM platforms as well as a discrete clock expander chip. Most fixes are corrections to lousy clock data of one form or another." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: mxs: Include clk mxs header file clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() clk: si5351: Set initial clkout rate when defined in platform data. clk: si5351: Fix clkout rate computation. clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks clk: ux500: clk-sysctrl: handle clocks with no parents clk: ux500: Provide device enumeration number suffix for SMSC911x 01 June 2013, 10:55:26 UTC
c361cb5 Linus Torvalds 01 June 2013, 10:53:41 UTC Merge tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev Pull fbdev fixes from Jean-Christophe PLAGNIOL-VILLARD: "This contains some small fixes - Atmel LCDC: fix blank the backlight on remove - ps3fb: fix compile warning - OMAPDSS: Fix crash with DT boot" * tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev: atmel_lcdfb: blank the backlight on remove trivial: atmel_lcdfb: add missing error message OMAPDSS: Fix crash with DT boot fbdev/ps3fb: fix compile warning 01 June 2013, 10:53:41 UTC
6cf3c73 Linus Torvalds 01 June 2013, 10:51:52 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull assorted fixes from Al Viro: "There'll be more - I'm trying to dig out from under the pile of mail (a couple of weeks of something flu-like ;-/) and there's several more things waiting for review; this is just the obvious stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: zoran: racy refcount handling in vm_ops ->open()/->close() befs_readdir(): do not increment ->f_pos if filldir tells us to stop hpfs: deadlock and race in directory lseek() qnx6: qnx6_readdir() has a braino in pos calculation fix buffer leak after "scsi: saner replacements for ->proc_info()" vfs: Fix invalid ida_remove() call 01 June 2013, 10:51:52 UTC
f8cb279 Linus Torvalds 01 June 2013, 10:48:59 UTC Merge tag 'nfs-for-3.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull two NFS client fixes from Trond Myklebust: - Fix a regression that broke NFS mounting using klibc and busybox - Stable fix to check access modes correctly on NFSv4 delegated open() * tag 'nfs-for-3.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix security flavor negotiation with legacy binary mounts NFSv4: Fix a thinko in nfs4_try_open_cached 01 June 2013, 10:48:59 UTC
badec11 Will Schmidt 20 May 2013, 05:04:18 UTC powerpc/cputable: Fix typo on P7+ cputable entry Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 23:30:03 UTC
58a032c Michael Ellerman 15 May 2013, 20:19:31 UTC powerpc/perf: Add missing SIER support Commit 8f61aa3 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:29 UTC
cbda6aa Michael Ellerman 15 May 2013, 20:19:30 UTC powerpc/perf: Revert to original NO_SIPR logic This is a revert and then some of commit 860aad7 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:29 UTC
858957a Kevin Hao 16 May 2013, 20:58:42 UTC powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:28 UTC
2798389 Kevin Hao 16 May 2013, 20:58:41 UTC powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:28 UTC
f274ef8 Srivatsa S. Bhat 21 May 2013, 09:32:48 UTC powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:27 UTC
8e44ddc Paul Mackerras 23 May 2013, 15:42:21 UTC powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:27 UTC
f7b3367 Priyanka Jain 31 May 2013, 01:20:02 UTC powerpc/32bit:Store temporary result in r0 instead of r8 Commit a9c4e541ea9b22944da356f2a9258b4eddcc953b "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> CC: <stable@vger.kernel.org> [v3.7+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:27 UTC
0608d69 Aneesh Kumar K.V 31 May 2013, 01:03:24 UTC powerpc/mm: Always invalidate tlb on hpte invalidate and update If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbd293564de91596b8775340cf41ad5214c Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:26 UTC
280a5ba Michael Neuling 29 May 2013, 19:34:29 UTC powerpc/pseries: Improve stream generation comments in copypage/user No code changes, just documenting what's happening a little better. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:26 UTC
a515348 Michael Neuling 29 May 2013, 19:34:27 UTC powerpc/pseries: Kill all prefetch streams on context switch On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:25 UTC
2ac6f42 Nishanth Aravamudan 28 May 2013, 10:39:50 UTC powerpc/cputable: Fix oprofile_cpu_type on power8 Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:25 UTC
e242114 chenhui zhao 27 May 2013, 21:59:43 UTC powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:24 UTC
2b3f8e8 Michael Neuling 26 May 2013, 18:09:41 UTC powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:23 UTC
b75c100 Michael Neuling 26 May 2013, 18:30:56 UTC powerpc/tm: Move TM abort cause codes to uapi These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:23 UTC
6ce6c62 Michael Neuling 26 May 2013, 18:09:39 UTC powerpc/tm: Abort on emulation and alignment faults If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.c Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:22 UTC
24b9237 Michael Neuling 26 May 2013, 18:09:38 UTC powerpc/tm: Update cause codes documentation Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # 3.9 only Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:22 UTC
35f7097 Michael Neuling 26 May 2013, 18:09:37 UTC powerpc/tm: Make room for hypervisor in abort cause codes PAPR carves out 0xff-0xe0 for hypervisor use of transactional memory software abort cause codes. Unfortunately we don't respect this currently. Below fixes this to move our cause codes to below this region. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # 3.9 only Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 31 May 2013, 22:29:22 UTC
1d822d6 Linus Torvalds 31 May 2013, 21:59:14 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs fixes from Jan Kara: "Three reiserfs fixes. They fix real problems spotted by users so I hope they are ok even at this stage." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: fix deadlock with nfs racing on create/lookup reiserfs: fix problems with chowning setuid file w/ xattrs reiserfs: fix spurious multiple-fill in reiserfs_readdir_dentry 31 May 2013, 21:59:14 UTC
7cfb953 Linus Torvalds 31 May 2013, 21:56:21 UTC Merge tag 'for-linus-v3.10-rc4-crc-xattr-fixes' of git://oss.sgi.com/xfs/xfs Pull xfs extended attribute fixes for CRCs from Ben Myers: "Here are several fixes that are relevant on CRC enabled XFS filesystems. They are followed by a rework of the remote attribute code so that each block of the attribute contains a header with a CRC. Previously there was a CRC header per extent in the remote attribute code, but this was untenable because it was not possible to know how many extents would be allocated for the attribute until after the allocation has completed, due to the fragmentation of free space. This became complicated because the size of the headers needs to be added to the length of the payload to get the overall length required for the allocation. With a header per block, things are less complicated at the cost of a little space. I would have preferred to defer this and the rest of the CRC queue to 3.11 to mitigate risk for existing non-crc users in 3.10. Doing so would require setting a feature bit for the on-disk changes, and so I have been pressured into sending this pull request by Eric Sandeen and David Chinner from Red Hat. I'll send another pull request or two with the rest of the CRC queue next week. - Remove assert on count of remote attribute CRC headers - Fix the number of blocks read in for remote attributes - Zero remote attribute tails properly - Fix mapping of remote attribute buffers to have correct length - initialize temp leaf properly in xfs_attr3_leaf_unbalance, and xfs_attr3_leaf_compact - Rework remote atttributes to have a header per block" * tag 'for-linus-v3.10-rc4-crc-xattr-fixes' of git://oss.sgi.com/xfs/xfs: xfs: rework remote attr CRCs xfs: fully initialise temp leaf in xfs_attr3_leaf_compact xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance xfs: correctly map remote attr buffers during removal xfs: remote attribute tail zeroing does too much xfs: remote attribute read too short xfs: remote attribute allocation may be contiguous 31 May 2013, 21:56:21 UTC
e8d256a Linus Torvalds 31 May 2013, 21:50:16 UTC Merge tag 'for-linus-v3.10-rc4' of git://oss.sgi.com/xfs/xfs Pull xfs fixes from Ben Myers: - Fix nested transactions in xfs_qm_scall_setqlim - Clear suid/sgid bits when we truncate with size update - Fix recovery for split buffers - Fix block count on remote symlinks - Add fsgeom flag for v5 superblock support - Disable XFS_IOC_SWAPEXT for CRC enabled filesystems - Fix dirv3 freespace block corruption * tag 'for-linus-v3.10-rc4' of git://oss.sgi.com/xfs/xfs: xfs: fix dir3 freespace block corruption xfs: disable swap extents ioctl on CRC enabled filesystems xfs: add fsgeom flag for v5 superblock support. xfs: fix incorrect remote symlink block count xfs: fix split buffer vector log recovery support xfs: kill suid/sgid through the truncate path. xfs: avoid nesting transactions in xfs_qm_scall_setqlim() 31 May 2013, 21:50:16 UTC
977b55c Linus Torvalds 31 May 2013, 21:47:04 UTC Merge tag 'please-pull-aertracefix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull aer error logging fix from Tony Luck: "Can't call pci_get_domain_bus_and_slot() from interupt context" * tag 'please-pull-aertracefix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: aerdrv: Move cper_print_aer() call out of interrupt context 31 May 2013, 21:47:04 UTC
fe696b4 Linus Torvalds 31 May 2013, 21:45:10 UTC Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Module compilation issues (symbol not exported). - Plug a hole where user space can bring the kernel down. * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: don't kill the kernel on a bad esr from el0 arm64: treat unhandled compat el0 traps as undef arm64: Do not report user faults for handled signals arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)' 31 May 2013, 21:45:10 UTC
a1457c0 Jeff Mahoney 31 May 2013, 19:51:17 UTC reiserfs: fix deadlock with nfs racing on create/lookup Reiserfs is currently able to be deadlocked by having two NFS clients where one has removed and recreated a file and another is accessing the file with an open file handle. If one client deletes and recreates a file with timing such that the recreated file obtains the same [dirid, objectid] pair as the original file while another client accesses the file via file handle, the create and lookup can race and deadlock if the lookup manages to create the in-memory inode first. The create thread, in insert_inode_locked4, will hold the write lock while waiting on the other inode to be unlocked. The lookup thread, anywhere in the iget path, will release and reacquire the write lock while it schedules. If it needs to reacquire the lock while the create thread has it, it will never be able to make forward progress because it needs to reacquire the lock before ultimately unlocking the inode. This patch drops the write lock across the insert_inode_locked4 call so that the ordering of inode_wait -> write lock is retained. Since this would have been the case before the BKL push-down, this is safe. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> 31 May 2013, 21:14:20 UTC
4a85701 Jeff Mahoney 31 May 2013, 19:54:17 UTC reiserfs: fix problems with chowning setuid file w/ xattrs reiserfs_chown_xattrs() takes the iattr struct passed into ->setattr and uses it to iterate over all the attrs associated with a file to change ownership of xattrs (and transfer quota associated with the xattr files). When the setuid bit is cleared during chown, ATTR_MODE and iattr->ia_mode are passed to all the xattrs as well. This means that the xattr directory will have S_IFREG added to its mode bits. This has been prevented in practice by a missing IS_PRIVATE check in reiserfs_acl_chmod, which caused a double-lock to occur while holding the write lock. Since the file system was completely locked up, the writeout of the corrupted mode never happened. This patch temporarily clears everything but ATTR_UID|ATTR_GID for the calls to reiserfs_setattr and adds the missing IS_PRIVATE check. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> 31 May 2013, 21:14:11 UTC
0bdc7ac Jeff Mahoney 31 May 2013, 19:07:52 UTC reiserfs: fix spurious multiple-fill in reiserfs_readdir_dentry After sleeping for filldir(), we check to see if the file system has changed and research. The next_pos pointer is updated but its value isn't pushed into the key used for the search itself. As a result, the search returns the same item that the last cycle of the loop did and filldir() is called multiple times with the same data. The end result is that the buffer can contain the same name multiple times. This can be returned to userspace or used internally in the xattr code where it can manifest with the following warning: jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) reiserfs_for_each_xattr uses reiserfs_readdir_dentry to iterate over the xattr names and ends up trying to unlink the same name twice. The second attempt fails with -ENOENT and the error is returned. At some point I'll need to add support into reiserfsck to remove the orphaned directories left behind when this occurs. The fix is to push the value into the key before researching. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> 31 May 2013, 21:13:58 UTC
4ad1f70 Al Viro 23 May 2013, 08:38:22 UTC zoran: racy refcount handling in vm_ops ->open()/->close() worse, we lock ->resource_lock too late when we are destroying the final clonal VMA; the check for lack of other mappings of the same opened file can race with mmap(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 May 2013, 19:33:32 UTC
56c21b5 Richard Genoud 31 May 2013, 15:49:35 UTC atmel_lcdfb: blank the backlight on remove When removing atmel_lcdfb module, the backlight is unregistered but not blanked. (only for CONFIG_BACKLIGHT_ATMEL_LCDC case). This can result in the screen going full white depending on how the PWM is wired. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 31 May 2013, 19:18:55 UTC
65ac057 Richard Genoud 31 May 2013, 14:28:38 UTC trivial: atmel_lcdfb: add missing error message When a too small framebuffer is given, the atmel_lcdfb_check_var silently fails. Adding an error message will save some head scratching. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 31 May 2013, 19:18:30 UTC
448293a Al Viro 22 May 2013, 17:41:26 UTC befs_readdir(): do not increment ->f_pos if filldir tells us to stop Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 May 2013, 19:17:56 UTC
31abdab Al Viro 18 May 2013, 06:38:52 UTC hpfs: deadlock and race in directory lseek() For one thing, there's an ABBA deadlock on hpfs fs-wide lock and i_mutex in hpfs_dir_lseek() - there's a lot of methods that grab the former with the caller already holding the latter, so it must take i_mutex first. For another, locking the damn thing, carefully validating the offset, then dropping locks and assigning the offset is obviously racy. Moreover, we _must_ do hpfs_add_pos(), or the machinery in dnode.c won't modify the sucker on B-tree surgeries. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 May 2013, 19:17:43 UTC
1d7095c Al Viro 17 May 2013, 19:21:56 UTC qnx6: qnx6_readdir() has a braino in pos calculation We want to mask lower 5 bits out, not leave only those and clear the rest... As it is, we end up always starting to read from the beginning of directory, no matter what the current position had been. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 May 2013, 19:17:31 UTC
801d9d2 Jan Beulich 29 May 2013, 12:26:53 UTC fix buffer leak after "scsi: saner replacements for ->proc_info()" That patch failed to set proc_scsi_fops' .release method. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 May 2013, 19:16:51 UTC
5d477b6 Takashi Iwai 10 May 2013, 12:04:11 UTC vfs: Fix invalid ida_remove() call When the group id of a shared mount is not allocated, the umount still tries to call mnt_release_group_id(), which eventually hits a kernel warning at ida_remove() spewing a message like: ida_remove called for id=0 which is not allocated. This patch fixes the bug simply checking the group id in the caller. Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 May 2013, 19:16:33 UTC
9955ac4 Mark Rutland 28 May 2013, 14:54:15 UTC arm64: don't kill the kernel on a bad esr from el0 Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org 31 May 2013, 15:04:51 UTC
381cc2b Mark Rutland 24 May 2013, 11:02:35 UTC arm64: treat unhandled compat el0 traps as undef Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: Johannes Jensen <Johannes.Jensen@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 31 May 2013, 15:04:44 UTC
aafc9d1 Nicholas Bellinger 31 May 2013, 07:49:41 UTC iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 31 May 2013, 08:21:28 UTC
d5ddad4 Nicholas Bellinger 31 May 2013, 07:46:11 UTC target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 31 May 2013, 08:21:23 UTC
a93cb29 Linus Torvalds 31 May 2013, 06:04:05 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "One qxl 32-bit warning fix, the rest is a bunch of radeon fixes from Alex for some issues we've been seeing." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: fix build warnings on 32-bit radeon: use max_bus_speed to activate gen2 speeds drm/radeon: narrow scope of Apple re-POST hack drm/radeon: don't check crtcs in card_posted() on cards without DCE drm/radeon: fix card_posted check for newer asics drm/radeon: fix typo in cu_per_sh on verde drm/radeon: UVD block on SUMO2 is the same as on SUMO 31 May 2013, 06:04:05 UTC
970fa98 Dave Airlie 31 May 2013, 02:45:09 UTC drm/qxl: fix build warnings on 32-bit Just the usual printk related warnings. Signed-off-by: Dave Airlie <airlied@redhat.com> 31 May 2013, 02:45:09 UTC
d68c380 Fabio Estevam 27 May 2013, 15:28:25 UTC clk: mxs: Include clk mxs header file Fix the following sparse warnings: drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static? drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed $SUBJECT line] 31 May 2013, 01:27:24 UTC
cea4dcf Kees Cook 23 May 2013, 17:32:17 UTC iscsi-target: fix heap buffer overflow on error If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 31 May 2013, 01:07:54 UTC
4203afc Linus Torvalds 31 May 2013, 00:48:56 UTC Merge branch 'for-3.10' of git://linux-nfs.org/~bfields/linux Pull nfsd fixes from Bruce Fields: "A couple minor fixes for the (new to 3.10) gss-proxy code. And one regression from user-namespace changes. (XBMC clients were doing something admittedly weird--sending -1 gid's--but something that we used to allow.)" * 'for-3.10' of git://linux-nfs.org/~bfields/linux: svcrpc: fix failures to handle -1 uid's and gid's svcrpc: implement O_NONBLOCK behavior for use-gss-proxy svcauth_gss: fix error code in use_gss_proxy() 31 May 2013, 00:48:56 UTC
21363ca Nicholas Bellinger 30 May 2013, 04:35:23 UTC target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reported-by: Badari Pulavarty <pbadari@us.ibm.com> Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 31 May 2013, 00:46:27 UTC
484b002 Linus Torvalds 31 May 2013, 00:44:10 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: - Three EFI-related fixes - Two early memory initialization fixes - build fix for older binutils - fix for an eager FPU performance regression -- currently we don't allow the use of the FPU at interrupt time *at all* in eager mode, which is clearly wrong. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Allow FPU to be used at interrupt time even with eagerfpu x86, crc32-pclmul: Fix build with older binutils x86-64, init: Fix a possible wraparound bug in switchover in head_64.S x86, range: fix missing merge during add range x86, efi: initial the local variable of DataSize to zero efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse efivarfs: Never return ENOENT from firmware again 31 May 2013, 00:44:10 UTC
5187b28 Pekka Riikonen 13 May 2013, 12:32:07 UTC x86: Allow FPU to be used at interrupt time even with eagerfpu With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by: Pekka Riikonen <priikone@iki.fi> Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org Cc: <stable@vger.kernel.org> v3.7+ Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 30 May 2013, 23:36:42 UTC
2baad61 Jan Beulich 29 May 2013, 12:43:54 UTC x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 30 May 2013, 23:36:23 UTC
7bc0dc2 Dave Chinner 21 May 2013, 08:02:08 UTC xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit ad1858d77771172e08016890f0eb2faedec3ecee) 30 May 2013, 22:26:31 UTC
634fd53 Dave Chinner 21 May 2013, 08:02:06 UTC xfs: fully initialise temp leaf in xfs_attr3_leaf_compact xfs_attr3_leaf_compact() uses a temporary buffer for compacting the the entries in a leaf. It copies the the original buffer into the temporary buffer, then zeros the original buffer completely. It then copies the entries back into the original buffer. However, the original buffer has not been correctly initialised, and so the movement of the entries goes horribly wrong. Make sure the zeroed destination buffer is fully initialised, and once we've set up the destination incore header appropriately, write is back to the buffer before starting to move entries around. While debugging this, the _d/_s prefixes weren't sufficient to remind me what buffer was what, so rename then all _src/_dst. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit d4c712bcf26a25c2b67c90e44e0b74c7993b5334) 30 May 2013, 22:26:24 UTC
9e80c76 Dave Chinner 21 May 2013, 08:02:05 UTC xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance xfs_attr3_leaf_unbalance() uses a temporary buffer for recombining the entries in two leaves when the destination leaf requires compaction. The temporary buffer ends up being copied back over the original destination buffer, so the header in the temporary buffer needs to contain all the information that is in the destination buffer. To make sure the temporary buffer is fully initialised, once we've set up the temporary incore header appropriately, write is back to the temporary buffer before starting to move entries around. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 8517de2a81da830f5d90da66b4799f4040c76dc9) 30 May 2013, 22:26:16 UTC
58a7228 Dave Chinner 21 May 2013, 08:02:04 UTC xfs: correctly map remote attr buffers during removal If we don't map the buffers correctly (same as for get/set operations) then the incore buffer lookup will fail. If a block number matches but a length is wrong, then debug kernels will ASSERT fail in _xfs_buf_find() due to the length mismatch. Ensure that we map the buffers correctly by basing the length of the buffer on the attribute data length rather than the remote block count. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 6863ef8449f1908c19f43db572e4474f24a1e9da) 30 May 2013, 22:26:08 UTC
26f7144 Dave Chinner 21 May 2013, 08:02:03 UTC xfs: remote attribute tail zeroing does too much When an attribute data does not fill then entire remote block, we zero the remaining part of the buffer. This, however, needs to take into account that the buffer has a header, and so the offset where zeroing starts and the length of zeroing need to take this into account. Otherwise we end up with zeros over the end of the attribute value when CRCs are enabled. While there, make sure we only ask to map an extent that covers the remaining range of the attribute, rather than asking every time for the full length of remote data. If the remote attribute blocks are contiguous with other parts of the attribute tree, it will map those blocks as well and we can potentially zero them incorrectly. We can also get buffer size mistmatches when trying to read or remove the remote attribute, and this can lead to not finding the correct buffer when looking it up in cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 4af3644c9a53eb2f1ecf69cc53576561b64be4c6) 30 May 2013, 22:25:58 UTC
551b382 Dave Chinner 21 May 2013, 08:02:02 UTC xfs: remote attribute read too short Reading a maximally size remote attribute fails when CRCs are enabled with this verification error: XFS (vdb): remote attribute header does not match required off/len/owner) There are two reasons for this, the first being that the length of the buffer being read is determined from the args->rmtblkcnt which doesn't take into account CRC headers. Hence the mapped length ends up being too short and so we need to calculate it directly from the value length. The second is that the byte count of valid data within a buffer is capped by the length of the data and so doesn't take into account that the buffer might be longer due to headers. Hence we need to calculate the data space in the buffer first before calculating the actual byte count of data. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 913e96bc292e1bb248854686c79d6545ef3ee720) 30 May 2013, 22:25:50 UTC
9531e2d Dave Chinner 21 May 2013, 08:02:01 UTC xfs: remote attribute allocation may be contiguous When CRCs are enabled, there may be multiple allocations made if the headers cause a length overflow. This, however, does not mean that the number of headers required increases, as the second and subsequent extents may be contiguous with the previous extent. Hence when we map the extents to write the attribute data, we may end up with less extents than allocations made. Hence the assertion that we consume the number of headers we calculated in the allocation loop is incorrect and needs to be removed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 90253cf142469a40f89f989904abf0a1e500e1a6) 30 May 2013, 22:25:39 UTC
e400d27 Dave Chinner 28 May 2013, 08:37:17 UTC xfs: fix dir3 freespace block corruption When the directory freespace index grows to a second block (2017 4k data blocks in the directory), the initialisation of the second new block header goes wrong. The write verifier fires a corruption error indicating that the block number in the header is zero. This was being tripped by xfs/110. The problem is that the initialisation of the new block is done just fine in xfs_dir3_free_get_buf(), but the caller then users a dirv2 structure to zero on-disk header fields that xfs_dir3_free_get_buf() has already zeroed. These lined up with the block number in the dir v3 header format. While looking at this, I noticed that the struct xfs_dir3_free_hdr() had 4 bytes of padding in it that wasn't defined as padding or being zeroed by the initialisation. Add a pad field declaration and fully zero the on disk and in-core headers in xfs_dir3_free_get_buf() so that this is never an issue in the future. Note that this doesn't change the on-disk layout, just makes the 32 bits of padding in the layout explicit. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 5ae6e6a401957698f2bd8c9f4a86d86d02199fea) 30 May 2013, 22:22:54 UTC
7c9950f Dave Chinner 27 May 2013, 06:38:24 UTC xfs: disable swap extents ioctl on CRC enabled filesystems Currently, swapping extents from one inode to another is a simple act of switching data and attribute forks from one inode to another. This, unfortunately in no longer so simple with CRC enabled filesystems as there is owner information embedded into the BMBT blocks that are swapped between inodes. Hence swapping the forks between inodes results in the inodes having mapping blocks that point to the wrong owner and hence are considered corrupt. To fix this we need an extent tree block or record based swap algorithm so that the BMBT block owner information can be updated atomically in the swap transaction. This is a significant piece of new work, so for the moment simply don't allow swap extent operations to succeed on CRC enabled filesystems. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 02f75405a75eadfb072609f6bf839e027de6a29a) 30 May 2013, 22:20:08 UTC
e7927e8 Dave Chinner 27 May 2013, 06:38:26 UTC xfs: add fsgeom flag for v5 superblock support. Currently userspace has no way of determining that a filesystem is CRC enabled. Add a flag to the XFS_IOC_FSGEOMETRY ioctl output to indicate that the filesystem has v5 superblock support enabled. This will allow xfs_info to correctly report the state of the filesystem. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 74137fff067961c9aca1e14d073805c3de8549bd) 30 May 2013, 22:19:45 UTC
1de09d1 Dave Chinner 27 May 2013, 06:38:20 UTC xfs: fix incorrect remote symlink block count When CRCs are enabled, the number of blocks needed to hold a remote symlink on a 1k block size filesystem may be 2 instead of 1. The transaction reservation for the allocated blocks was not taking this into account and only allocating one block. Hence when trying to read or invalidate such symlinks, we are mapping a hole where there should be a block and things go bad at that point. Fix the reservation to use the correct block count, clean up the block count calculation similar to the remote attribute calculation, and add a debug guard to detect when we don't write the entire symlink to disk. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 321a95839e65db3759a07a3655184b0283af90fe) 30 May 2013, 22:19:07 UTC
7d2ffe8 Dave Chinner 27 May 2013, 06:38:23 UTC xfs: fix split buffer vector log recovery support A long time ago in a galaxy far away.... .. the was a commit made to fix some ilinux specific "fragmented buffer" log recovery problem: http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=b29c0bece51da72fb3ff3b61391a391ea54e1603 That problem occurred when a contiguous dirty region of a buffer was split across across two pages of an unmapped buffer. It's been a long time since that has been done in XFS, and the changes to log the entire inode buffers for CRC enabled filesystems has re-introduced that corner case. And, of course, it turns out that the above commit didn't actually fix anything - it just ensured that log recovery is guaranteed to fail when this situation occurs. And now for the gory details. xfstest xfs/085 is failing with this assert: XFS (vdb): bad number of regions (0) in inode log format XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 1583 Largely undocumented factoid #1: Log recovery depends on all log buffer format items starting with this format: struct foo_log_format { __uint16_t type; __uint16_t size; .... As recoery uses the size field and assumptions about 32 bit alignment in decoding format items. So don't pay much attention to the fact log recovery thinks that it decoding an inode log format item - it just uses them to determine what the size of the item is. But why would it see a log format item with a zero size? Well, luckily enough xfs_logprint uses the same code and gives the same error, so with a bit of gdb magic, it turns out that it isn't a log format that is being decoded. What logprint tells us is this: Oper (130): tid: a0375e1a len: 28 clientid: TRANS flags: none BUF: #regs: 2 start blkno: 144 (0x90) len: 16 bmap size: 2 flags: 0x4000 Oper (131): tid: a0375e1a len: 4096 clientid: TRANS flags: none BUF DATA ---------------------------------------------------------------------------- Oper (132): tid: a0375e1a len: 4096 clientid: TRANS flags: none xfs_logprint: unknown log operation type (4e49) ********************************************************************** * ERROR: data block=2 * ********************************************************************** That we've got a buffer format item (oper 130) that has two regions; the format item itself and one dirty region. The subsequent region after the buffer format item and it's data is them what we are tripping over, and the first bytes of it at an inode magic number. Not a log opheader like there is supposed to be. That means there's a problem with the buffer format item. It's dirty data region is 4096 bytes, and it contains - you guessed it - initialised inodes. But inode buffers are 8k, not 4k, and we log them in their entirety. So something is wrong here. The buffer format item contains: (gdb) p /x *(struct xfs_buf_log_format *)in_f $22 = {blf_type = 0x123c, blf_size = 0x2, blf_flags = 0x4000, blf_len = 0x10, blf_blkno = 0x90, blf_map_size = 0x2, blf_data_map = {0xffffffff, 0xffffffff, .... }} Two regions, and a signle dirty contiguous region of 64 bits. 64 * 128 = 8k, so this should be followed by a single 8k region of data. And the blf_flags tell us that the type of buffer is a XFS_BLFT_DINO_BUF. It contains inodes. And because it doesn't have the XFS_BLF_INODE_BUF flag set, that means it's an inode allocation buffer. So, it should be followed by 8k of inode data. But we know that the next region has a header of: (gdb) p /x *ohead $25 = {oh_tid = 0x1a5e37a0, oh_len = 0x100000, oh_clientid = 0x69, oh_flags = 0x0, oh_res2 = 0x0} and so be32_to_cpu(oh_len) = 0x1000 = 4096 bytes. It's simply not long enough to hold all the logged data. There must be another region. There is - there's a following opheader for another 4k of data that contains the other half of the inode cluster data - the one we assert fail on because it's not a log format header. So why is the second part of the data not being accounted to the correct buffer log format structure? It took a little more work with gdb to work out that the buffer log format structure was both expecting it to be there but hadn't accounted for it. It was at that point I went to the kernel code, as clearly this wasn't a bug in xfs_logprint and the kernel was writing bad stuff to the log. First port of call was the buffer item formatting code, and the discontiguous memory/contiguous dirty region handling code immediately stood out. I've wondered for a long time why the code had this comment in it: vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; /* * You would think we need to bump the nvecs here too, but we do not * this number is used by recovery, and it gets confused by the boundary * split here * nvecs++; */ vecp++; And it didn't account for the extra vector pointer. The case being handled here is that a contiguous dirty region lies across a boundary that cannot be memcpy()d across, and so has to be split into two separate operations for xlog_write() to perform. What this code assumes is that what is written to the log is two consecutive blocks of data that are accounted in the buf log format item as the same contiguous dirty region and so will get decoded as such by the log recovery code. The thing is, xlog_write() knows nothing about this, and so just does it's normal thing of adding an opheader for each vector. That means the 8k region gets written to the log as two separate regions of 4k each, but because nvecs has not been incremented, the buf log format item accounts for only one of them. Hence when we come to log recovery, we process the first 4k region and then expect to come across a new item that starts with a log format structure of some kind that tells us whenteh next data is going to be. Instead, we hit raw buffer data and things go bad real quick. So, the commit from 2002 that commented out nvecs++ is just plain wrong. It breaks log recovery completely, and it would seem the only reason this hasn't been since then is that we don't log large contigous regions of multi-page unmapped buffers very often. Never would be a closer estimate, at least until the CRC code came along.... So, lets fix that by restoring the nvecs accounting for the extra region when we hit this case..... .... and there's the problemin log recovery it is apparently working around: XFS: Assertion failed: i == item->ri_total, file: fs/xfs/xfs_log_recover.c, line: 2135 Yup, xlog_recover_do_reg_buffer() doesn't handle contigous dirty regions being broken up into multiple regions by the log formatting code. That's an easy fix, though - if the number of contiguous dirty bits exceeds the length of the region being copied out of the log, only account for the number of dirty bits that region covers, and then loop again and copy more from the next region. It's a 2 line fix. Now xfstests xfs/085 passes, we have one less piece of mystery code, and one more important piece of knowledge about how to structure new log format items.. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 709da6a61aaf12181a8eea8443919ae5fc1b731d) 30 May 2013, 22:18:01 UTC
2962f5a Dave Chinner 27 May 2013, 06:38:25 UTC xfs: kill suid/sgid through the truncate path. XFS has failed to kill suid/sgid bits correctly when truncating files of non-zero size since commit c4ed4243 ("xfs: split xfs_setattr") introduced in the 3.1 kernel. Fix it. Fix it. cc: stable kernel <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 56c19e89b38618390addfc743d822f99519055c6) 30 May 2013, 22:17:35 UTC
08fb390 Dave Chinner 21 May 2013, 08:02:00 UTC xfs: avoid nesting transactions in xfs_qm_scall_setqlim() Lockdep reports: ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #3 Not tainted --------------------------------------------- setquota/28368 is trying to acquire lock: (sb_internal){++++.?}, at: [<c11e8846>] xfs_trans_alloc+0x26/0x50 but task is already holding lock: (sb_internal){++++.?}, at: [<c11e8846>] xfs_trans_alloc+0x26/0x50 from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be allocated. xfs_qm_scall_setqlim() is starting a transaction and then not passing it into xfs_qm_dqet() and so it starts it's own transaction when allocating the dquot. Splat! Fix this by not allocating the dquot in xfs_qm_scall_setqlim() inside the setqlim transaction. This requires getting the dquot first (and allocating it if necessary) then dropping and relocking the dquot before joining it to the setqlim transaction. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit f648167f3ac79018c210112508c732ea9bf67c7b) 30 May 2013, 22:10:56 UTC
3655b22 Linus Torvalds 30 May 2013, 21:01:18 UTC Merge tag 'stable/for-linus-3.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Use proper error paths - Clean up APIC IPI usage (incorrect arguments) - Delay XenBus frontend resume is backend (xenstored) is not running - Fix build error with various combinations of CONFIG_ * tag 'stable/for-linus-3.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm xen-pciback: more uses of cached MSI-X capability offset xen: Clean up apic ipi interface xenbus: save xenstore local status for later use xenbus: delay xenbus frontend resume if xenstored is not running xmem/tmem: fix 'undefined variable' build error. 30 May 2013, 21:01:18 UTC
5489e94 Jean-Christophe PLAGNIOL-VILLARD 30 May 2013, 20:23:44 UTC MAINTAINERS: Framebuffer Layer maintainers update Tomi and I will now take care of the Framebuffer Layer The git tree is now on kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Olof Johansson <olof@lixom.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2013, 21:00:59 UTC
5c1dfc8 Linus Torvalds 30 May 2013, 20:59:28 UTC Merge tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Again very calm updates at this time. All small fixes for individual drivers, mostly ASoC codecs, in addition to soc-compress fix for capture streams which is safe to apply as there is no in-tree users yet." * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: cs42l52: fix default value for MASTERA_VOL. ASoC: wm8994: check for array index returned ASoC: wm8994: Fix reporting of accessory removal on WM8958 ASoC: wm8994: use the correct pointer to get the control value ASoC: wm5110: Correct DSP4R Mixer control name ALSA: usb-6fire: Modify firmware version check ASoC: cs42l52: fix master playback mute mask. ASoC: cs42l52: fix bogus shifts in "Speaker Volume" and "PCM Mixer Volume" controls. ASoC: cs42l52: microphone bias is controlled by IFACE_CTL2 register. ASoC: davinci: fix sample rotation ASoC: wm5110: Add missing speaker initialisation ASoC: soc-compress: Send correct stream event for capture start ASoC: max98090: request IRQF_ONESHOT interrupt 30 May 2013, 20:59:28 UTC
eb54d43 Chuck Lever 14 May 2013, 18:37:56 UTC NFS: Fix security flavor negotiation with legacy binary mounts Darrick J. Wong <darrick.wong@oracle.com> reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d44 "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 30 May 2013, 20:31:34 UTC
37448ad Lance Ortiz 30 May 2013, 14:25:12 UTC aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> 30 May 2013, 17:51:20 UTC
dcdbe33 Linus Torvalds 30 May 2013, 04:39:01 UTC Merge branch 'mn10300' (mn10300 fixes from David Howells) Merge mn10300 fixes from David Howells. * emailed patches from David Howells <dhowells@redhat.com>: MN10300: Need pci_iomap() and __pci_ioport_map() defining MN10300: ASB2305's PCI code needs the definition of XIRQ1 MN10300: Enable IRQs more in system call exit work path MN10300: Fix ret_from_kernel_thread 30 May 2013, 04:39:01 UTC
1aeeac7 David Howells 28 May 2013, 19:21:25 UTC MN10300: Need pci_iomap() and __pci_ioport_map() defining Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ken Cox <jkc@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2013, 04:38:48 UTC
b8bc9b0 David Howells 28 May 2013, 19:21:17 UTC MN10300: ASB2305's PCI code needs the definition of XIRQ1 The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ken Cox <jkc@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2013, 04:38:48 UTC
d17fc23 David Howells 28 May 2013, 19:21:10 UTC MN10300: Enable IRQs more in system call exit work path Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ken Cox <jkc@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2013, 04:38:48 UTC
1e00227 David Howells 28 May 2013, 19:21:02 UTC MN10300: Fix ret_from_kernel_thread ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87a804 ("mn10300: switch to saner kernel_execve() semantics") Reported-by: Ken Cox <jkc@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ken Cox <jkc@redhat.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2013, 04:38:48 UTC
1d19f78 Nicholas Bellinger 15 May 2013, 08:30:01 UTC ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session Given that srpt_release_channel_work() calls target_wait_for_sess_cmds() to allow outstanding se_cmd_t->cmd_kref a change to complete, the call to perform target_sess_cmd_list_set_waiting() needs to happen in srpt_shutdown_session() Also, this patch adds an explicit call to srpt_shutdown_session() within srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be called in the cases where TFO->shutdown_session() is not triggered directly by TCM. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 30 May 2013, 04:30:46 UTC
9b31a32 Nicholas Bellinger 15 May 2013, 07:52:44 UTC target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 30 May 2013, 04:30:33 UTC
7b55eab Linus Torvalds 29 May 2013, 23:54:29 UTC Merge tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin-control fixes from Linus Walleij: - Six patches fixing up the suspend/resume and wakeup handling of the Samsung and Exynos drivers. - Errorpath fixes for four different drivers. All on the probe() errorpath. - Make the debugfs code for pin config take the right mutex. * tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pinconf: take the right mutex pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() pinctrl: exynos: Handle suspend/resume of GPIO EINT registers pinctrl: samsung: Allow per-bank SoC-specific private data pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks pinctrl: Don't override the error code in probe error handling ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs pinctrl: samsung: fix suspend/resume functionality 29 May 2013, 23:54:29 UTC
e9a0a3a Dave Airlie 29 May 2013, 23:14:03 UTC Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux into drm-next just a few minor fixes for radeon. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: radeon: use max_bus_speed to activate gen2 speeds drm/radeon: narrow scope of Apple re-POST hack drm/radeon: don't check crtcs in card_posted() on cards without DCE drm/radeon: fix card_posted check for newer asics drm/radeon: fix typo in cu_per_sh on verde drm/radeon: UVD block on SUMO2 is the same as on SUMO 29 May 2013, 23:14:03 UTC
419e321 Tony Prisk 17 May 2013, 21:18:49 UTC clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() With the addition of a DVO clock, a bug is now evident in the vt8500 clock code: [ 0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c() [ 0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int This is caused by an unbalanced spinlock in vt8500_dclk_set_rate(). Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore(). Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Mike Turquette <mturquette@linaro.org> 29 May 2013, 23:13:58 UTC
6532cb7 Marek Belisko 03 May 2013, 05:53:23 UTC clk: si5351: Set initial clkout rate when defined in platform data. clock-frequency property from platform data was read but never used. Apply defined rate when clock is registered. Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: add missing changelog] Cc: stable@kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org> 29 May 2013, 22:09:24 UTC
67e1e22 Marek Belisko 03 May 2013, 05:53:22 UTC clk: si5351: Fix clkout rate computation. Rate was incorrectly computed because we read from wrong divider register. Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@kernel.org 29 May 2013, 22:09:15 UTC
f448bad Trond Myklebust 29 May 2013, 19:36:40 UTC NFSv4: Fix a thinko in nfs4_try_open_cached We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org 29 May 2013, 20:03:23 UTC
8d0b880 Wei Liu 29 May 2013, 16:02:58 UTC xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 29 May 2013, 19:24:55 UTC
056f3d5 Sylwester Nawrocki 10 May 2013, 16:38:09 UTC clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks Currently no driver *) handles the sysreg clock, with an assumption that this clock is always left in its default state (enabled). Before commit 6e6aac7590f902d14d90bace3fd499 ARM: EXYNOS: Migrate clock support to common clock framework the sysreg clock was not even defined and hence wasn't handled explicitly in the kernel. To restore the previous behaviour disable masking the sysreg clock off in the clock core by default. *) Except the Exynos4x12 FIMC-IS driver, which will be modified to not touch the sysreg clock. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 29 May 2013, 18:52:19 UTC
f586938 Fabio Baltieri 30 April 2013, 12:45:06 UTC clk: ux500: clk-sysctrl: handle clocks with no parents Fix clk_reg_sysctrl() to set main clock registers of new struct clk_sysctrl even if the registered clock has no parents. This fixes an issue where "ulpclk" was registered with all clk->reg_* fields uninitialized, causing a -EINVAL error from clk_prepare(). Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> 29 May 2013, 18:52:18 UTC
dd47044 Lee Jones 08 May 2013, 13:29:03 UTC clk: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. It appears that we need this in order to obtain the correct clock. Without this fix Ethernet does not function on Ux500 devices, which is a regression. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: improved changelog] 29 May 2013, 18:52:18 UTC
back to top