https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
64aa90f Linux 3.16-rc7 27 July 2014, 19:41:55 UTC
9dae0a3 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A bunch of fixes for perf and kprobes: - revert a commit that caused a perf group regression - silence dmesg spam - fix kprobe probing errors on ia64 and ppc64 - filter kprobe faults from userspace - lockdep fix for perf exit path - prevent perf #GP in KVM guest - correct perf event and filters" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64 kprobes/x86: Don't try to resolve kprobe faults from userspace perf/x86/intel: Avoid spamming kernel log for BTS buffer failure perf/x86/intel: Protect LBR and extra_regs against KVM lying perf: Fix lockdep warning on process exit perf/x86/intel/uncore: Fix SNB-EP/IVT Cbox filter mappings perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge perf: Revert ("perf: Always destroy groups on exit") 27 July 2014, 16:57:16 UTC
43a255c Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of crash fixes, plus a fix that on 32 bits would cause a missing -ENOSYS for nonexistent system calls" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu: Fix cache topology for early P4-SMT x86_32, entry: Store badsys error code in %eax x86, MCE: Robustify mcheck_init_device 27 July 2014, 16:53:01 UTC
fbf08ef Merge branch 'vfs-for-3.16' of git://git.infradead.org/users/hch/vfs Pull vfs fixes from Christoph Hellwig: "A vfsmount leak fix, and a compile warning fix" * 'vfs-for-3.16' of git://git.infradead.org/users/hch/vfs: fs: umount on symlink leaks mnt count direct-io: fix uninitialized warning in do_direct_IO() 27 July 2014, 16:43:41 UTC
2bdb5eb Merge tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire regression fix from Stefan Richter: "IEEE 1394 (FireWire) subsystem fix: MSI don't work on VIA PCIe controllers with some isochronous workloads (regression since v3.16-rc1)" * tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: disable MSI for VIA VT6315 again 27 July 2014, 16:42:06 UTC
2062afb Fix gcc-4.9.0 miscompilation of load_balance() in scheduler Michel Dänzer and a couple of other people reported inexplicable random oopses in the scheduler, and the cause turns out to be gcc mis-compiling the load_balance() function when debugging is enabled. The gcc bug apparently goes back to gcc-4.5, but slight optimization changes means that it now showed up as a problem in 4.9.0 and 4.9.1. The instruction scheduling problem causes gcc to schedule a spill operation to before the stack frame has been created, which in turn can corrupt the spilled value if an interrupt comes in. There may be other effects of this bug too, but that's the code generation problem seen in Michel's case. This is fixed in current gcc HEAD, but the workaround as suggested by Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments when compiling the kernel, which disables the gcc code that causes the problem. This can result in slightly worse debug information for variable accesses, but that is infinitely preferable to actual code generation problems. Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows non-debug builds to verify that the debug build would be identical: we can do export GCC_COMPARE_DEBUG=1 to make gcc internally verify that the result of the build is independent of the "-g" flag (it will make the compiler build everything twice, toggling the debug flag, and compare the results). Without the "-fno-var-tracking-assignments" option, the build would fail (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc compare failure. See also gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801 Reported-by: Michel Dänzer <michel@daenzer.net> Suggested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jakub Jelinek <jakub@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2014, 21:52:01 UTC
8bdd638 mm: fix direct reclaim writeback regression Shortly before 3.16-rc1, Dave Jones reported: WARNING: CPU: 3 PID: 19721 at fs/xfs/xfs_aops.c:971 xfs_vm_writepage+0x5ce/0x630 [xfs]() CPU: 3 PID: 19721 Comm: trinity-c61 Not tainted 3.15.0+ #3 Call Trace: xfs_vm_writepage+0x5ce/0x630 [xfs] shrink_page_list+0x8f9/0xb90 shrink_inactive_list+0x253/0x510 shrink_lruvec+0x563/0x6c0 shrink_zone+0x3b/0x100 shrink_zones+0x1f1/0x3c0 try_to_free_pages+0x164/0x380 __alloc_pages_nodemask+0x822/0xc90 alloc_pages_vma+0xaf/0x1c0 handle_mm_fault+0xa31/0xc50 etc. 970 if (WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) == 971 PF_MEMALLOC)) I did not respond at the time, because a glance at the PageDirty block in shrink_page_list() quickly shows that this is impossible: we don't do writeback on file pages (other than tmpfs) from direct reclaim nowadays. Dave was hallucinating, but it would have been disrespectful to say so. However, my own /var/log/messages now shows similar complaints WARNING: CPU: 1 PID: 28814 at fs/ext4/inode.c:1881 ext4_writepage+0xa7/0x38b() WARNING: CPU: 0 PID: 27347 at fs/ext4/inode.c:1764 ext4_writepage+0xa7/0x38b() from stressing some mmotm trees during July. Could a dirty xfs or ext4 file page somehow get marked PageSwapBacked, so fail shrink_page_list()'s page_is_file_cache() test, and so proceed to mapping->a_ops->writepage()? Yes, 3.16-rc1's commit 68711a746345 ("mm, migration: add destination page freeing callback") has provided such a way to compaction: if migrating a SwapBacked page fails, its newpage may be put back on the list for later use with PageSwapBacked still set, and nothing will clear it. Whether that can do anything worse than issue WARN_ON_ONCEs, and get some statistics wrong, is unclear: easier to fix than to think through the consequences. Fixing it here, before the put_new_page(), addresses the bug directly, but is probably the worst place to fix it. Page migration is doing too many parts of the job on too many levels: fixing it in move_to_new_page() to complement its SetPageSwapBacked would be preferable, except why is it (and newpage->mapping and newpage->index) done there, rather than down in migrate_page_move_mapping(), once we are sure of success? Not a cleanup to get into right now, especially not with memcg cleanups coming in 3.17. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2014, 21:38:50 UTC
b401796 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "This is radeon and intel fixes, and is a small bit larger than I'm guessing you'd like it to be. - i915: fixes 32-bit highmem i915 blank screen, semaphore hang and runtime pm fix - radeon: gpuvm stability fix for hangs since 3.15, and hang/reboot regression on TN/RL devices, The only slightly controversial one is the change to use GB for the vm_size, which I'm letting through as its a new interface we defined in this merge window, and I'd prefer to have the released kernel have the final interface rather than changing it later" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix cut and paste issue for hawaii. drm/radeon: fix irq ring buffer overflow handling drm/i915: Simplify i915_gem_release_all_mmaps() drm/radeon: fix error handling in radeon_vm_bo_set_addr drm/i915: fix freeze with blank screen booting highmem drm/i915: Reorder the semaphore deadlock check, again drm/radeon/TN: only enable bapm on MSI systems drm/radeon: fix VM IB handling drm/radeon: fix handling of radeon_vm_bo_rmv v3 drm/radeon: let's use GB for vm_size (v2) 26 July 2014, 01:17:38 UTC
9c55021 Merge tag 'sound-3.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here contains only the fixes for the new FireWire bebob driver. All fairly trivial and local fixes, so safe to apply" * tag 'sound-3.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: bebob: Correction for return value of special_clk_ctl_put() in error ALSA: bebob: Correction for return value of .put callback ALSA: bebob: Use different labels for digital input/output ALSA: bebob: Fix a missing to unlock mutex in error handling case 26 July 2014, 01:03:45 UTC
051c2a9 Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fixes to temperature limit and vrm write operations in smsc47m192 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (smsc47m192) Fix temperature limit and vrm write operations 26 July 2014, 01:03:05 UTC
edffe1b parport: fix menu breakage Do not split the PARPORT-related symbols with the new kconfig symbol ARCH_MIGHT_HAVE_PC_PARPORT. The split was causing incorrect display of these symbols -- they were not being displayed together as they should be. Fixes: d90c3eb31535 "Kconfig cleanup (PARPORT_PC dependencies)" Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mark Salter <msalter@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org # for 3.13, 3.14, 3.15 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2014, 01:00:23 UTC
32e6e5c Merge tag 'blackfin-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin fixes from Steven Miao: "smc nor flash PM fix, pinctrl group fix, update defconfig, and build fixes" * tag 'blackfin-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section for XIP kernel defconfig: BF609: update spi config name irq: blackfin sec: drop duplicated sec priority set blackfin: bind different groups of one pinmux function to different state name blackfin: fix some bf5xx boards build for missing <linux/gpio.h> pm: bf609: cleanup smc nor flash 26 July 2014, 00:59:50 UTC
b76f982 blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section for XIP kernel to collect some undefined section to the end of the data section and avoid section overlap Signed-off-by: Steven Miao <realmz6@gmail.com> 26 July 2014, 00:32:50 UTC
ac425b6 defconfig: BF609: update spi config name Signed-off-by: Steven Miao <realmz6@gmail.com> 26 July 2014, 00:32:49 UTC
814ecd0 irq: blackfin sec: drop duplicated sec priority set Signed-off-by: Steven Miao <realmz6@gmail.com> 26 July 2014, 00:32:47 UTC
3f68e17 blackfin: bind different groups of one pinmux function to different state name Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com> 26 July 2014, 00:32:46 UTC
4ba7b5f blackfin: fix some bf5xx boards build for missing <linux/gpio.h> Signed-off-by: Steven Miao <realmz6@gmail.com> 26 July 2014, 00:32:45 UTC
c6a26ce pm: bf609: cleanup smc nor flash drop smc pin state change code, pin state will be saved in pinctrl-adi2 driver cleanup nor flash init/exit for pm suspend/resume Signed-off-by: Steven Miao <realmz6@gmail.com> 26 July 2014, 00:32:44 UTC
0e6103e Merge branch 'parisc-3.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "We have two trivial patches in here. One removes the SA_RESTORER #define since on parisc we don't have the sa_restorer field in struct sigaction, the other patch removes an unnecessary memset(). The SA_RESTORER removal patch is scheduled for stable trees, since without it some userspace apps don't build" * 'parisc-3.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Eliminate memset after alloc_bootmem_pages parisc: Remove SA_RESTORER define 25 July 2014, 23:17:06 UTC
0246544 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "These two pathes fix issues with the kernel-userspace protocol changes in v3.15" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add FUSE_NO_OPEN_SUPPORT flag to INIT fuse: s_time_gran fix 25 July 2014, 23:16:34 UTC
bf72f5d x86: Merge tag 'ras_urgent' into x86/urgent Promote one fix for 3.16 This fix was necessary after 9c15a24b038f ("x86/mce: Improve mcheck_init_device() error handling") went in. What this patch did was, among others, check the return value of misc_register and exit early if it encountered an error. Original code sloppily didn't do that. However, cef12ee52b05 ("xen/mce: Add mcelog support for Xen platform") made it so that xen's init routine xen_late_init_mcelog runs first. This was needed for the xen mcelog device which is supposed to be independent from the baremetal one. Initially it was reported that misc_register() fails often on xen and that's why it needed fixing. However, it is *supposed* to fail by design, when running in dom0 so that the xen mcelog device file gets registered first. And *then* you need the notifier *not* unregistered on the error path so that the timer does get deleted properly in the CPU hotplug notifier. Btw, this fix is needed also on baremetal in the unlikely event that misc_register(&mce_chrdev_device) fails there too. I was unsure whether to rush it in now and decided to delay it to 3.17. However, xen people wanted it promoted as it breaks xen when doing cpu hotplug there. So, after a bit of simmering in tip/master for initial smoke testing, let's move it to 3.16. It fixes a semi-regression which got introduced in 3.16 so no need for stable tagging. tip/x86/ras contains that exact same commit but we can't remove it there as it is not the last one. It won't cause any merge issues, as I confirmed locally but I should state here the special situation of this one fix explicitly anyway. Thanks. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 24 July 2014, 23:32:31 UTC
1b2c486 drm/radeon: fix cut and paste issue for hawaii. This is a halfway fix for hawaii acceleration. More fixes to come but hopefully isolated to userspace. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 24 July 2014, 23:17:35 UTC
97cefc3 Merge branch 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes two more radeon fixes. * 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix irq ring buffer overflow handling drm/radeon: fix error handling in radeon_vm_bo_set_addr 24 July 2014, 23:17:08 UTC
9d6ed3c Merge tag 'drm-intel-fixes-2014-07-24' of git://anongit.freedesktop.org/drm-intel into drm-fixes This time in time! Just 32bit-pae fix from Hugh, semaphores fun from Chris and a fix for runtime pm cherry-picked from next. Paulo is still working on a fix for runtime pm when X does cursor fun when the display is off, but that one isn't ready yet. * tag 'drm-intel-fixes-2014-07-24' of git://anongit.freedesktop.org/drm-intel: drm/i915: Simplify i915_gem_release_all_mmaps() drm/i915: fix freeze with blank screen booting highmem drm/i915: Reorder the semaphore deadlock check, again 24 July 2014, 23:16:28 UTC
9794144 parisc: Eliminate memset after alloc_bootmem_pages alloc_bootmem and related function always return zeroed region of memory. Thus a memset after calls to these functions is unnecessary. The following Coccinelle semantic patch was used for making the change: @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E - memset(E,0,E1); Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Helge Deller <deller@gmx.de> 24 July 2014, 20:05:08 UTC
20dbea4 parisc: Remove SA_RESTORER define The sa_restorer field in struct sigaction is obsolete and no longer in the parisc implementation. However, the core code assumes the field is present if SA_RESTORER is defined. So, the define needs to be removed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> 24 July 2014, 20:03:26 UTC
043572d hwmon: (smsc47m192) Fix temperature limit and vrm write operations Temperature limit clamps are applied after converting the temperature from milli-degrees C to degrees C, so either the clamp limit needs to be specified in degrees C, not milli-degrees C, or clamping must happen before converting to degrees C. Use the latter method to avoid overflows. vrm is an u8, so the written value needs to be limited to [0, 255]. Cc: Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> 24 July 2014, 13:25:25 UTC
295dc39 fs: umount on symlink leaks mnt count Currently umount on symlink blocks following umount: /vz is separate mount # ls /vz/ -al | grep test drwxr-xr-x. 2 root root 4096 Jul 19 01:14 testdir lrwxrwxrwx. 1 root root 11 Jul 19 01:16 testlink -> /vz/testdir # umount -l /vz/testlink umount: /vz/testlink: not mounted (expected) # lsof /vz # umount /vz umount: /vz: device is busy. (unexpected) In this case mountpoint_last() gets an extra refcount on path->mnt Signed-off-by: Vasily Averin <vvs@openvz.org> Acked-by: Ian Kent <raven@themaw.net> Acked-by: Jeff Layton <jlayton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de> 24 July 2014, 10:18:12 UTC
6fcc542 direct-io: fix uninitialized warning in do_direct_IO() The following warnings: fs/direct-io.c: In function ‘__blockdev_direct_IO’: fs/direct-io.c:1011:12: warning: ‘to’ may be used uninitialized in this function [-Wmaybe-uninitialized] fs/direct-io.c:913:16: note: ‘to’ was declared here fs/direct-io.c:1011:12: warning: ‘from’ may be used uninitialized in this function [-Wmaybe-uninitialized] fs/direct-io.c:913:10: note: ‘from’ was declared here are false positive because dio_get_page() either fails, or sets both 'from' and 'to'. Paul Bolle said ... Maybe it's better to move initializing "to" and "from" out of dio_get_page(). That _might_ make it easier for both the the reader and the compiler to understand what's going on. Something like this: Christoph Hellwig said ... The fix of moving the code definitively looks nicer, while I think uninitialized_var is horrible wart that won't get anywhere near my code. Boaz Harrosh: I agree with Christoph and Paul Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 24 July 2014, 10:17:07 UTC
82e13c7 Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux Pull nfsd bugfix from Bruce Fields: "Another regression from the xdr encoding rewrite" * 'for-3.16' of git://linux-nfs.org/~bfields/linux: NFSD: Fix crash encoding lock reply on 32-bit 24 July 2014, 00:55:11 UTC
98de5ab Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix arm64 regression introduced by limiting the CMA buffer to ZONE_DMA on platforms where RAM starts above 4GB (and ZONE_DMA becoming 0)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Create non-empty ZONE_DMA when DRAM starts above 4GB 24 July 2014, 00:47:36 UTC
29ae8a6 Merge tag 'xtensa-next-20140721' of git://github.com/czankel/xtensa-linux Pull Xtensa fixes from Chris Zankel: - resolve FIXMEs in double exception handler for window overflow. This fix makes native building of linux on xtensa host possible; - fix sysmem region removal issue introduced in 3.15. * tag 'xtensa-next-20140721' of git://github.com/czankel/xtensa-linux: xtensa: fix sysmem reservation at the end of existing block xtensa: add fixup for double exception raised in window overflow 24 July 2014, 00:46:46 UTC
02ec474 Merge tag 'pinctrl-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are three pin control fixes for the v3.16 series. Sorry that some of these arrive late, the summer heat in Sweden makes me slow. - an IRQ handling fix for the STi driver, also for stable - another IRQ fix for the RCAR GPIO driver - a MAINTAINERS entry" * tag 'pinctrl-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: gpio: rcar: Add support for DT IRQ flags MAINTAINERS: Add entry for the Renesas pin controller driver pinctrl: st: Fix irqmux handler 24 July 2014, 00:42:37 UTC
ea9339e Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata regression fix from Tejun Heo: "The last libata/for-3.16-fixes pull contained a regression introduced by 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32") which in turn was a fix for a regression introduced earlier while changing queue tag order to accomodate hard drives which perform poorly if tags are not allocated in circular order (ugh...). The regression happens only for SAS controllers making use of libata to serve ATA devices. They don't fill an ata_host field which is used by the new tag allocation function leading to NULL dereference. This patch adds a new intermediate field ata_host->n_tags which is initialized for both SAS and !SAS cases to fix the issue" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: introduce ata_host->n_tags to avoid oops on SAS controllers 24 July 2014, 00:39:28 UTC
b292d6b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "A few fixups for the input subsystem" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document INPUT_PROP_TOPBUTTONPAD Input: fix defuzzing logic Input: sirfsoc-onkey - fix GPL v2 license string typo Input: st-keyscan - fix 'defined but not used' compiler warnings Input: synaptics - add min/max quirk for pnp-id LEN2002 (Edge E531) Input: i8042 - add Acer Aspire 5710 to nomux blacklist Input: ti_am335x_tsc - warn about incorrect spelling Input: wacom - cleanup multitouch code when touch_max is 2 23 July 2014, 22:42:53 UTC
7442cf9 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here is a handful of powerpc fixes for 3.16. They are all pretty simple and self contained and should still make this release" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: use _GLOBAL_TOC for memmove powerpc/pseries: dynamically added OF nodes need to call of_node_init powerpc: subpage_protect: Increase the array size to take care of 64TB powerpc: Fix bugs in emulate_step() powerpc: Disable doorbells on Power8 DD1.x 23 July 2014, 22:34:13 UTC
355cb09 Merge tag 'urgent-slab-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull slab fix from Mike Snitzer: "This fixes the broken duplicate slab name check in kmem_cache_sanity_check() that has been repeatedly reported (as recently as today against Fedora rawhide). Pekka seemed to have it staged for a late 3.15-rc in his 'slab/urgent' branch but never sent a pull request, see: https://lkml.org/lkml/2014/5/23/648" * tag 'urgent-slab-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: slab_common: fix the check for duplicate slab names 23 July 2014, 22:14:46 UTC
ed4a108 Merge branch 'akpm' (patches from Andrew Morton) Merge fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: hugetlb: fix copy_hugetlb_page_range() simple_xattr: permit 0-size extended attributes mm/fs: fix pessimization in hole-punching pagecache shmem: fix splicing from a hole while it's punched shmem: fix faulting into a hole, not taking i_mutex mm: do not call do_fault_around for non-linear fault sh: also try passing -m4-nofpu for SH2A builds zram: avoid lockdep splat by revalidate_disk mm/rmap.c: fix pgoff calculation to handle hugepage correctly coredump: fix the setting of PF_DUMPCORE 23 July 2014, 22:11:11 UTC
0253d63 mm: hugetlb: fix copy_hugetlb_page_range() Commit 4a705fef9862 ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry") changed the order of huge_ptep_set_wrprotect() and huge_ptep_get(), which leads to breakage in some workloads like hugepage-backed heap allocation via libhugetlbfs. This patch fixes it. The test program for the problem is shown below: $ cat heap.c #include <unistd.h> #include <stdlib.h> #include <string.h> #define HPS 0x200000 int main() { int i; char *p = malloc(HPS); memset(p, '1', HPS); for (i = 0; i < 5; i++) { if (!fork()) { memset(p, '2', HPS); p = malloc(HPS); memset(p, '3', HPS); free(p); return 0; } } sleep(1); free(p); return 0; } $ export HUGETLB_MORECORE=yes ; export HUGETLB_NO_PREFAULT= ; hugectl --heap ./heap Fixes 4a705fef9862 ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry"), so is applicable to -stable kernels which include it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Guillaume Morin <guillaume@morinfr.org> Suggested-by: Guillaume Morin <guillaume@morinfr.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [2.6.37+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:55 UTC
4e66d44 simple_xattr: permit 0-size extended attributes If a filesystem uses simple_xattr to support user extended attributes, LTP setxattr01 and xfstests generic/062 fail with "Cannot allocate memory": simple_xattr_alloc()'s wrap-around test mistakenly excludes values of zero size. Fix that off-by-one (but apparently no filesystem needs them yet). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:55 UTC
792ceae mm/fs: fix pessimization in hole-punching pagecache I wanted to revert my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), to keep truncate_inode_pages_range() in synch with shmem_undo_range(); but have stepped back - a change to hole-punching in truncate_inode_pages_range() is a change to hole-punching in every filesystem (except tmpfs) that supports it. If there's a logical proof why no filesystem can depend for its own correctness on the pincer guarantee in truncate_inode_pages_range() - an instant when the entire hole is removed from pagecache - then let's revisit later. But the evidence is that only tmpfs suffered from the livelock, and we have no intention of extending hole-punch to ramfs. So for now just add a few comments (to match or differ from those in shmem_undo_range()), and fix one silliness noticed in d0823576bf4b... Its "index == start" addition to the hole-punch termination test was incomplete: it opened a way for the end condition to be missed, and the loop go on looking through the radix_tree, all the way to end of file. Fix that pessimization by resetting index when detected in inner loop. Note that it's actually hard to hit this case, without the obsessive concurrent faulting that trinity does: normally all pages are removed in the initial trylock_page() pass, and this loop finds nothing to do. I had to "#if 0" out the initial pass to reproduce bug and test fix. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:55 UTC
b1a3665 shmem: fix splicing from a hole while it's punched shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:55 UTC
8e205f7 shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:54 UTC
c118678 mm: do not call do_fault_around for non-linear fault Ingo Korb reported that "repeated mapping of the same file on tmpfs using remap_file_pages sometimes triggers a BUG at mm/filemap.c:202 when the process exits". He bisected the bug to d7c1755179b8 ("mm: implement ->map_pages for shmem/tmpfs"), although the bug was actually added by commit 8c6e50b0290c ("mm: introduce vm_ops->map_pages()"). The problem is caused by calling do_fault_around for a _non-linear_ fault. In this case pgoff is shifted and might become negative during calculation. Faulting around non-linear page-fault makes no sense and breaks the logic in do_fault_around because pgoff is shifted. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Ingo Korb <ingo.korb@tu-dortmund.de> Tested-by: Ingo Korb <ingo.korb@tu-dortmund.de> Cc: Hugh Dickins <hughd@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dave Jones <davej@redhat.com> Cc: Ning Qu <quning@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [3.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:54 UTC
b1923b5 sh: also try passing -m4-nofpu for SH2A builds When compiling a SH2A kernel (e.g. se7206_defconfig or rsk7203_defconfig) using sh4-linux-gcc, linking fails with: net/built-in.o: In function `__sk_run_filter': net/core/filter.c:566: undefined reference to `__fpscr_values' net/core/filter.c:269: undefined reference to `__fpscr_values' ... net/built-in.o:net/core/filter.c:580: more undefined references to `__fpscr_values' follow This happens because sh4-linux-gcc doesn't support the "-m2a-nofpu", which is thus filtered out by "$(call cc-option, ...)". As compiling using sh4-linux-gcc is useful for compile coverage, also try passing "-m4-nofpu" (which is presumably filtered out when using a real sh2a-linux toolchain) to disable the generation of FPU instructions and references to __fpscr_values[]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Tony Breeds <tony@bakeyournoodle.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:54 UTC
b4c5c60 zram: avoid lockdep splat by revalidate_disk Sasha reported lockdep warning [1] introduced by [2]. It could be fixed by doing disk revalidation out of the init_lock. It's okay because disk capacity change is protected by init_lock so that revalidate_disk always sees up-to-date value so there is no race. [1] https://lkml.org/lkml/2014/7/3/735 [2] zram: revalidate disk after capacity change Fixes 2e32baea46ce ("zram: revalidate disk after capacity change"). Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: "Alexander E. Patrakov" <patrakov@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:54 UTC
a0f7a75 mm/rmap.c: fix pgoff calculation to handle hugepage correctly I triggered VM_BUG_ON() in vma_address() when I tried to migrate an anonymous hugepage with mbind() in the kernel v3.16-rc3. This is because pgoff's calculation in rmap_walk_anon() fails to consider compound_order() only to have an incorrect value. This patch introduces page_to_pgoff(), which gets the page's offset in PAGE_CACHE_SIZE. Kirill pointed out that page cache tree should natively handle hugepages, and in order to make hugetlbfs fit it, page->index of hugetlbfs page should be in PAGE_CACHE_SIZE. This is beyond this patch, but page_to_pgoff() contains the point to be fixed in a single function. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:54 UTC
aed8adb coredump: fix the setting of PF_DUMPCORE Commit 079148b919d0 ("coredump: factor out the setting of PF_DUMPCORE") cleaned up the setting of PF_DUMPCORE by removing it from all the linux_binfmt->core_dump() and moving it to zap_threads().But this ended up clearing all the previously set flags. This causes issues during core generation when tsk->flags is checked again (eg. for PF_USED_MATH to dump floating point registers). Fix this. Signed-off-by: Silesh C V <svellattu@mvista.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 July 2014, 22:10:54 UTC
d584a66 firewire: ohci: disable MSI for VIA VT6315 again Revert half of commit d151f9854f21: If isochronous I/O is attempted with packets larget than 1 kByte, VIA VT6315 rev 01 immediately stops to generate any interrupts if MSI are used. Fix this by going back to legacy interrupts. [Thread "Isochronous streaming with VT6315 OHCI", http://marc.info/?t=139049641500003] With smaller packets, the loss of IRQs happens too but only very rarely --- rarely eneough that it was not yet possible for me to determine whether QUIRK_NO_MSI is an actual fix for this rare variation of this chip bug. I am keeping QUIRK_CYCLE_TIMER off of VT6315 rev >= 1 because this has been verified by myself with certainty. On the other hand, I am also keeping QUIRK_CYCLE_TIMER on for VT6315 rev 0 because I don't know at this time whether this revision accesses Cycle Timer non-atomically like most of the other VIA OHCIs are known to do. Reported-by: Rémy Bruno <remy-fw@remy.trinnov.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 23 July 2014, 18:11:19 UTC
e8c214d drm/radeon: fix irq ring buffer overflow handling We must mask out the overflow bit as well, otherwise the wptr will never match the rptr again and the interrupt handler will loop forever. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> 23 July 2014, 15:35:36 UTC
2a22615 x86, cpu: Fix cache topology for early P4-SMT P4 systems with cpuid level < 4 can have SMT, but the cache topology description available (cpuid2) does not include SMP information. Now we know that SMT shares all cache levels, and therefore we can mark all available cache levels as shared. We do this by setting cpu_llc_id to ->phys_proc_id, since that's the same for each SMT thread. We can do this unconditional since if there's no SMT its still true, the one CPU shares cache with only itself. This fixes a problem where such CPUs report an incorrect LLC CPU mask. This in turn fixes a crash in the scheduler where the topology was build wrong, it assumes the LLC mask to include at least the SMT CPUs. Cc: Josh Boyer <jwboyer@redhat.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140722133514.GM12054@laptop.lan Signed-off-by: H. Peter Anvin <hpa@zytor.com> 23 July 2014, 15:16:17 UTC
f98bac5 NFSD: Fix crash encoding lock reply on 32-bit Commit 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low on space" forgot to free conf->data in nfsd4_encode_lockt and before sign conf->data to NULL in nfsd4_encode_lock_denied, causing a leak. Worse, kfree() can be called on an uninitialized pointer in the case of a succesful lock (or one that fails for a reason other than a conflict). (Note that lock->lk_denied.ld_owner.data appears it should be zero here, until you notice that it's one arm of a union the other arm of which is written to in the succesful case by the memcpy(&lock->lk_resp_stateid, &lock_stp->st_stid.sc_stateid, sizeof(stateid_t)); in nfsd4_lock(). In the 32-bit case this overwrites ld_owner.data.) Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Fixes: 8c7424cff6 ""nfsd4: don't try to encode conflicting owner if low on space" Signed-off-by: J. Bruce Fields <bfields@redhat.com> 23 July 2014, 14:31:56 UTC
1a112d1 libata: introduce ata_host->n_tags to avoid oops on SAS controllers 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32") directly used ata_port->scsi_host->can_queue from ata_qc_new() to determine the number of tags supported by the host; unfortunately, SAS controllers doing SATA don't initialize ->scsi_host leading to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 PGD 0 Oops: 0002 [#1] SMP Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000 RIP: 0010:[<ffffffff814e0618>] [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 RSP: 0018:ffff88061a003ae8 EFLAGS: 00010012 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000 FS: 00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0 Stack: ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200 ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68 ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80 Call Trace: [<ffffffff814e96e1>] ata_sas_queuecmd+0xa1/0x430 [<ffffffffa0056ce1>] sas_queuecommand+0x191/0x220 [libsas] [<ffffffff8149afee>] scsi_dispatch_cmd+0x10e/0x300 [<ffffffff814a3bc5>] scsi_request_fn+0x2f5/0x550 [<ffffffff81317613>] __blk_run_queue+0x33/0x40 [<ffffffff8131781a>] queue_unplugged+0x2a/0x90 [<ffffffff8131ceb4>] blk_flush_plug_list+0x1b4/0x210 [<ffffffff8131d274>] blk_finish_plug+0x14/0x50 [<ffffffff8117eaa8>] __do_page_cache_readahead+0x198/0x1f0 [<ffffffff8117ee21>] force_page_cache_readahead+0x31/0x50 [<ffffffff8117ee7e>] page_cache_sync_readahead+0x3e/0x50 [<ffffffff81172ac6>] generic_file_read_iter+0x496/0x5a0 [<ffffffff81219897>] blkdev_read_iter+0x37/0x40 [<ffffffff811e307e>] new_sync_read+0x7e/0xb0 [<ffffffff811e3734>] vfs_read+0x94/0x170 [<ffffffff811e43c6>] SyS_read+0x46/0xb0 [<ffffffff811e33d1>] ? SyS_lseek+0x91/0xb0 [<ffffffff8171ee29>] system_call_fastpath+0x16/0x1b Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00 Fix it by introducing ata_host->n_tags which is initialized to ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to scsi_host_template->can_queue in ata_host_register() for !SAS ones. As SAS hosts are never registered, this will give them the same ATA_MAX_QUEUE - 1 as before. Note that we can't use scsi_host->can_queue directly for SAS hosts anyway as they can go higher than the libata maximum. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Reported-by: Jesse Brandeburg <jesse.brandeburg@gmail.com> Reported-by: Peter Hurley <peter@hurleysoftware.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Fixes: 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32") Cc: Kevin Hao <haokexin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org 23 July 2014, 14:30:34 UTC
eedd10f drm/i915: Simplify i915_gem_release_all_mmaps() An object can only have an active gtt mapping if it is currently bound into the global gtt. Therefore we can simply walk the list of all bound objects and check the flag upon those for an active gtt mapping. From commit 48018a57a8f5900e7e53ffaa0adeb784095accfb Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Dec 13 15:22:31 2013 -0200 drm/i915: release the GTT mmaps when going into D3 Also note that the WARN is inappropriate for this function as GPU activity is orthogonal to GTT mmap status. Rather it is the caller that relies upon this condition and so it should assert that the GPU is idle itself. References: https://bugs.freedesktop.org/show_bug.cgi?id=80081 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: cherry-pick from -next to -fixes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 23 July 2014, 14:09:51 UTC
d50314a arm64: Create non-empty ZONE_DMA when DRAM starts above 4GB ZONE_DMA is created to allow 32-bit only devices to access memory in the absence of an IOMMU. On systems where the memory starts above 4GB, it is expected that some devices have a DMA offset hardwired to be able to access the bottom of the memory. Linux currently supports DT bindings for the DMA offsets but they are not (easily) available early during boot. This patch tries to guess a DMA offset and assumes that ZONE_DMA corresponds to the 32-bit mask above the start of DRAM. Fixes: 2d5a5612bc (arm64: Limit the CMA buffer to 32-bit if ZONE_DMA) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Mark Salter <msalter@redhat.com> Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Anup Patel <anup.patel@linaro.org> 23 July 2014, 10:23:58 UTC
f62d14a Input: document INPUT_PROP_TOPBUTTONPAD Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 23 July 2014, 05:20:48 UTC
45ccaf4 Merge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux into for-3.16-rcX 22 July 2014, 22:38:27 UTC
5b75327 drm/radeon: fix error handling in radeon_vm_bo_set_addr Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 22 July 2014, 16:21:58 UTC
eb12f72 ALSA: bebob: Correction for return value of special_clk_ctl_put() in error This commit is a supplement to my previous patch. http://mailman.alsa-project.org/pipermail/alsa-devel/2014-July/079190.html The special_clk_ctl_put() still returns 0 in error handling case. It should return -EINVAL. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> 22 July 2014, 15:31:28 UTC
d7afaec fuse: add FUSE_NO_OPEN_SUPPORT flag to INIT Here some additional changes to set a capability flag so that clients can detect when it's appropriate to return -ENOSYS from open. This amends the following commit introduced in 3.14: 7678ac50615d fuse: support clients that don't implement 'open' However we can only add the flag to 3.15 and later since there was no protocol version update in 3.14. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org> # v3.15+ 22 July 2014, 14:37:43 UTC
a800bad fuse: s_time_gran fix Default s_time_gran is 1, don't overwrite that if userspace didn't explicitly specify one. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org> # v3.15+ 22 July 2014, 14:37:42 UTC
f77ac91 ALSA: bebob: Correction for return value of .put callback This commit is for correction of my misunderstanding about return value of .put callback in ALSA Control interface. According to 'Writing ALSA Driver' (*1), return value of the callback has three patterns; 1: changed, 0: not changed, an negative value: fatal error. But I misunderstood that it's boolean; zero or nonzero. *1: Writing an ALSA Driver (2005, Takashi Iwai) http://www.alsa-project.org/main/index.php/ALSA_Driver_Documentation Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> 22 July 2014, 14:21:54 UTC
5a0438f ALSA: bebob: Use different labels for digital input/output This commit uses different labels for control elements of digital input/output interfaces to correct my misunderstanding about M-Audio Firewire 1814 and ProjectMix I/O. According to user manuals for these two models, they have two modes for digital input; one is S/PDIF in both of optical and coaxial interfaces, another is ADAT in optical interface only. But in current implementation, a control element for it reduced labels which a control element for digital output uses because of my misunderstanding that optical interface is not available for digital input with S/PDIF mode. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> 22 July 2014, 14:21:30 UTC
9014011 ALSA: bebob: Fix a missing to unlock mutex in error handling case In error handling case, special_clk_ctl_put() returns without unlock_mutex(), therefore the mutex is still locked. This commit moves mutex_lock() after the error handling case. This commit is my solution for this post. [PATCH -next] ALSA: bebob: Fix missing unlock on error in special_clk_ctl_put() https://lkml.org/lkml/2014/7/20/12 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> 22 July 2014, 14:21:17 UTC
8142b21 x86_32, entry: Store badsys error code in %eax Commit 554086d ("x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)") introduced a regression in the x86_32 syscall entry code, resulting in syscall() not returning proper errors for undefined syscalls on CPUs supporting the sysenter feature. The following code: > int result = syscall(666); > printf("result=%d errno=%d error=%s\n", result, errno, strerror(errno)); results in: > result=666 errno=0 error=Success Obviously, the syscall return value is the called syscall number, but it should have been an ENOSYS error. When run under ptrace it behaves correctly, which makes it hard to debug in the wild: > result=-1 errno=38 error=Function not implemented The %eax register is the return value register. For debugging via ptrace the syscall entry code stores the complete register context on the stack. The badsys handlers only store the ENOSYS error code in the ptrace register set and do not set %eax like a regular syscall handler would. The old resume_userspace call chain contains code that clobbers %eax and it restores %eax from the ptrace registers afterwards. The same goes for the ptrace-enabled call chain. When ptrace is not used, the syscall return value is the passed-in syscall number from the untouched %eax register. Use %eax as the return value register in syscall_badsys and sysenter_badsys, like a real syscall handler does, and have the caller push the value onto the stack for ptrace access. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1407221022380.31021@titan.int.lan.stealer.net Reviewed-and-tested-by: Andy Lutomirski <luto@amacapital.net> Cc: <stable@vger.kernel.org> # If 554086d is backported Signed-off-by: H. Peter Anvin <hpa@zytor.com> 22 July 2014, 09:34:05 UTC
88b9828 drm/i915: fix freeze with blank screen booting highmem x86_64 boots and displays fine, but booting x86_32 with CONFIG_HIGHMEM has frozen with a blank screen throughout 3.16-rc on this ThinkPad T420s, with i915 generation 6 graphics. Fix 9d0a6fa6c5e6 ("drm/i915: add render state initialization"): kunmap() takes struct page * argument, not virtual address. Which the compiler kindly points out, if you use the appropriate u32 *batch, instead of silencing it with a void *. Why did bisection lead decisively to nearby 229b0489aa75 ("drm/i915: add null render states for gen6, gen7 and gen8")? Because the u32 deposited at that virtual address by the previous stub failed the PageHighMem test, and so did no harm. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 22 July 2014, 06:10:36 UTC
6f5405b powerpc: use _GLOBAL_TOC for memmove memmove may be called from module code copy_pages(btrfs), and it may call memcpy, which may call back to C code, so it needs to use _GLOBAL_TOC to set up r2 correctly. This fixes following error when I tried to boot an le guest: Vector: 300 (Data Access) at [c000000073f97210] pc: c000000000015004: enable_kernel_altivec+0x24/0x80 lr: c000000000058fbc: enter_vmx_copy+0x3c/0x60 sp: c000000073f97490 msr: 8000000002009033 dar: d000000001d50170 dsisr: 40000000 current = 0xc0000000734c0000 paca = 0xc00000000fff0000 softe: 0 irq_happened: 0x01 pid = 815, comm = mktemp enter ? for help [c000000073f974f0] c000000000058fbc enter_vmx_copy+0x3c/0x60 [c000000073f97510] c000000000057d34 memcpy_power7+0x274/0x840 [c000000073f97610] d000000001c3179c copy_pages+0xfc/0x110 [btrfs] [c000000073f97660] d000000001c3c248 memcpy_extent_buffer+0xe8/0x160 [btrfs] [c000000073f97700] d000000001be4be8 setup_items_for_insert+0x208/0x4a0 [btrfs] [c000000073f97820] d000000001be50b4 btrfs_insert_empty_items+0xf4/0x140 [btrfs] [c000000073f97890] d000000001bfed30 insert_with_overflow+0x70/0x180 [btrfs] [c000000073f97900] d000000001bff174 btrfs_insert_dir_item+0x114/0x2f0 [btrfs] [c000000073f979a0] d000000001c1f92c btrfs_add_link+0x10c/0x370 [btrfs] [c000000073f97a40] d000000001c20e94 btrfs_create+0x204/0x270 [btrfs] [c000000073f97b00] c00000000026d438 vfs_create+0x178/0x210 [c000000073f97b50] c000000000270a70 do_last+0x9f0/0xe90 [c000000073f97c20] c000000000271010 path_openat+0x100/0x810 [c000000073f97ce0] c000000000272ea8 do_filp_open+0x58/0xd0 [c000000073f97dc0] c00000000025ade8 do_sys_open+0x1b8/0x300 [c000000073f97e30] c00000000000a008 syscall_exit+0x0/0x7c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2014, 05:56:04 UTC
97a9a71 powerpc/pseries: dynamically added OF nodes need to call of_node_init Commit 75b57ecf9 refactored device tree nodes to use kobjects such that they can be exposed via /sysfs. A secondary commit 0829f6d1f furthered this rework by moving the kobect initialization logic out of of_node_add into its own of_node_init function. The inital commit removed the existing kref_init calls in the pseries dlpar code with the assumption kobject initialization would occur in of_node_add. The second commit had the side effect of triggering a BUG_ON during DLPAR, migration and suspend/resume operations as a result of dynamically added nodes being uninitialized. This patch fixes this by adding of_node_init calls in place of the previously removed kref_init calls. Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes") Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2014, 05:55:59 UTC
dad6f37 powerpc: subpage_protect: Increase the array size to take care of 64TB We now support TASK_SIZE of 16TB, hence the array should be 8. Fixes the below crash: Unable to handle kernel paging request for data at address 0x000100bd Faulting instruction address: 0xc00000000004f914 cpu 0x13: Vector: 300 (Data Access) at [c000000fea75fa90] pc: c00000000004f914: .sys_subpage_prot+0x2d4/0x5c0 lr: c00000000004fb5c: .sys_subpage_prot+0x51c/0x5c0 sp: c000000fea75fd10 msr: 9000000000009032 dar: 100bd dsisr: 40000000 current = 0xc000000fea6ae490 paca = 0xc00000000fb8ab00 softe: 0 irq_happened: 0x00 pid = 8237, comm = a.out enter ? for help [c000000fea75fe30] c00000000000a164 syscall_exit+0x0/0x98 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2014, 05:55:55 UTC
e698b96 powerpc: Fix bugs in emulate_step() This fixes some bugs in emulate_step(). First, the setting of the carry bit for the arithmetic right-shift instructions was not correct on 64-bit machines because we were masking with a mask of type int rather than unsigned long. Secondly, the sld (shift left doubleword) instruction was using the wrong instruction field for the register containing the shift count. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2014, 05:55:51 UTC
bd6ba35 powerpc: Disable doorbells on Power8 DD1.x These processors do not currently support doorbell IPIs, so remove them from the feature list if we are at DD 1.xx for the 0x004d part. This fixes a regression caused by d4e58e5928f8 (powerpc/powernv: Enable POWER8 doorbell IPIs). With that patch the kernel would hang at boot when calling smp_call_function_many, as the doorbell would not be received by the target CPUs: .smp_call_function_many+0x2bc/0x3c0 (unreliable) .on_each_cpu_mask+0x30/0x100 .cpuidle_register_driver+0x158/0x1a0 .cpuidle_register+0x2c/0x110 .powernv_processor_idle_init+0x23c/0x2c0 .do_one_initcall+0xd4/0x260 .kernel_init_freeable+0x25c/0x33c .kernel_init+0x1c/0x120 .ret_from_kernel_thread+0x58/0x7c Fixes: d4e58e5928f8 (powerpc/powernv: Enable POWER8 doorbell IPIs) Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2014, 05:55:24 UTC
15ba223 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Null termination fix in dns_resolver got the pointer dereferncing wrong, fix from Ben Hutchings. 2) ip_options_compile() has a benign but real buffer overflow when parsing options. From Eric Dumazet. 3) Table updates can crash in netfilter's nftables if none of the state flags indicate an actual change, from Pablo Neira Ayuso. 4) Fix race in nf_tables dumping, also from Pablo. 5) GRE-GRO support broke the forwarding path because the segmentation state was not fully initialized in these paths, from Jerry Chu. 6) sunvnet driver leaks objects and potentially crashes on module unload, from Sowmini Varadhan. 7) We can accidently generate the same handle for several u32 classifier filters, fix from Cong Wang. 8) Several edge case bug fixes in fragment handling in xen-netback, from Zoltan Kiss. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) ipv4: fix buffer overflow in ip_options_compile() batman-adv: fix TT VLAN inconsistency on VLAN re-add batman-adv: drop QinQ claim frames in bridge loop avoidance dns_resolver: Null-terminate the right string xen-netback: Fix pointer incrementation to avoid incorrect logging xen-netback: Fix releasing header slot on error path xen-netback: Fix releasing frag_list skbs in error path xen-netback: Fix handling frag_list on grant op error path net_sched: avoid generating same handle for u32 filters net: huawei_cdc_ncm: add "subclass 3" devices net: qmi_wwan: add two Sierra Wireless/Netgear devices wan/x25_asy: integer overflow in x25_asy_change_mtu() net: ppp: fix creating PPP pass and active filters net/mlx4_en: cq->irq_desc wasn't set in legacy EQ's sunvnet: clean up objects created in vnet_new() on vnet_exit() r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40 net-gre-gro: Fix a bug that breaks the forwarding path netfilter: nf_tables: 64bit stats need some extra synchronization netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale netfilter: nf_tables: safe RCU iteration on list when dumping ... 22 July 2014, 05:46:01 UTC
89faa06 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fix from David Miller: "Need to hook up the new renameat2 system call" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up renameat2 syscall. 22 July 2014, 05:45:28 UTC
1486771 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide Pull IDE fixes from David Miller: - fix interrupt registry for some Atari IDE chipsets. - adjust Kconfig dependencies for x86_32 specific chips. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: Fix SC1200 dependencies ide: Fix CS5520 and CS5530 dependencies m68k/atari - ide: do not register interrupt if host->get_lock is set 22 July 2014, 05:44:24 UTC
8dcc3be Merge tag 'trace-fixes-v3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace fix from Steven Rostedt: "Tony Luck found that using the "uptime" trace clock that uses jiffies as a counter was converted to nanoseconds (silly), and after 1 hour 11 minutes and 34 seconds, this monotonic clock would wrap, causing havoc with the tracing system and making the clock useless. He converted that clock to use jiffies_64 and made it into a counter instead of nanosecond conversions, and displayed the clock with the straight jiffy count, which works much better than it did in the past" * tag 'trace-fixes-v3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix wraparound problems in "uptime" trace clock 22 July 2014, 05:43:15 UTC
2605392 sparc: Hook up renameat2 syscall. Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2014, 05:27:56 UTC
850717e Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge Antonio Quartulli says: ==================== pull request [net]: batman-adv 20140721 here you have two fixes that we have been testing for quite some time (this is why they arrived a bit late in the rc cycle). Patch 1) ensures that BLA packets get dropped and not forwarded to the mesh even if they reach batman-adv within QinQ frames. Forwarding them into the mesh means messing up with the TT database of other nodes which can generate all kind of unexpected behaviours during route computation. Patch 2) avoids a couple of race conditions triggered upon fast VLAN deletion-addition. Such race conditions are pretty dangerous because they not only create inconsistencies in the TT database of the nodes in the network, but such scenario is also unrecoverable (unless nodes are rebooted). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2014, 03:19:09 UTC
10ec947 ipv4: fix buffer overflow in ip_options_compile() There is a benign buffer overflow in ip_options_compile spotted by AddressSanitizer[1] : Its benign because we always can access one extra byte in skb->head (because header is followed by struct skb_shared_info), and in this case this byte is not even used. [28504.910798] ================================================================== [28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile [28504.913170] Read of size 1 by thread T15843: [28504.914026] [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0 [28504.915394] [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120 [28504.916843] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.918175] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.919490] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.920835] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.922208] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.923459] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.924722] [28504.925106] Allocated by thread T15843: [28504.925815] [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120 [28504.926884] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.927975] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.929175] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.930400] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.931677] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.932851] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.934018] [28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right [28504.934377] of 40-byte region [ffff880026382800, ffff880026382828) [28504.937144] [28504.937474] Memory state around the buggy address: [28504.938430] ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr [28504.939884] ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.941294] ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.942504] ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.943483] ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.945573] ^ [28504.946277] ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.094949] ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.096114] ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.097116] ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.098472] ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.099804] Legend: [28505.100269] f - 8 freed bytes [28505.100884] r - 8 redzone bytes [28505.101649] . - 8 allocated bytes [28505.102406] x=1..7 - x allocated bytes + (8-x) redzone bytes [28505.103637] ================================================================== [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2014, 03:16:26 UTC
ec8a362 Merge branch 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes * 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/TN: only enable bapm on MSI systems drm/radeon: fix VM IB handling drm/radeon: fix handling of radeon_vm_bo_rmv v3 drm/radeon: let's use GB for vm_size (v2) 22 July 2014, 00:44:10 UTC
67dd8f3 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A series of driver fixes: - fix DVB-S tuning with tda1071 - fix tuner probe on af9035 when the device has a bad eeprom - some fixes for the new si2168/2157 drivers - one Kconfig build fix (for omap4iss) - fixes at vpif error path - don't lock saa7134 ioctl at driver's base core level, as it now uses V4L2 and VB2 locking schema - fix audio at hdpvr driver - fix the aspect ratio at the digital timings table - one new USB ID (at gspca_pac7302): Genius i-Look 317 webcam" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] gspca_pac7302: Add new usb-id for Genius i-Look 317 [media] tda10071: fix returned symbol rate calculation [media] tda10071: fix spec inversion reporting [media] tda10071: add missing DVB-S2/PSK-8 FEC AUTO [media] tda10071: force modulation to QPSK on DVB-S [media] hdpvr: fix two audio bugs [media] davinci: vpif: missing unlocks on error [media] af9035: override tuner id when bad value set into eeprom [media] saa7134: use unlocked_ioctl instead of ioctl [media] media: v4l2-core: v4l2-dv-timings.c: Cleaning up code wrong value used in aspect ratio [media] si2168: firmware download fix [media] si2157: add one missing parenthesis [media] si2168: add one missing parenthesis [media] staging: tighten omap4iss dependencies 21 July 2014, 18:44:34 UTC
6890ad4 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Final block fixes for 3.16 Four small fixes that should go into 3.16, have been queued up for a bit and delayed due to vacation and other euro duties. But here they are. The pull request contains: - Fix for a reported crash with shared tagging on SCSI from Christoph - A regression fix for drbd. From Lars Ellenberg. - Hooking up the compat ioctl for BLKZEROOUT, which requires no translation. From Mikulas. - A fix for a regression where we woud crash on queue exit if the root_blkg is gone/not there. From Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: block: provide compat ioctl for BLKZEROOUT blkcg: don't call into policy draining if root_blkg is already gone drbd: fix regression 'out of mem, failed to invoke fence-peer helper' block: don't assume last put of shared tags is for the host 21 July 2014, 18:31:17 UTC
d6e6c48 Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Late libata fixes. The most important one is from Kevin Hao which makes sure that libata only allocates tags inside the max tag number the controller supports. libata always had this problem but the recent tag allocation change and addition of support for sata_fsl which only supports queue depth of 16 exposed the issue. Hans de Goede agreed to become the maintainer of libahci_platform which is under higher than usual development pressure from all the new controllers popping up from the ARM world" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode) drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq() libata: EH should handle AMNF error condition as a media error libata: support the ata host which implements a queue depth less than 32 MAINTAINERS: Add Hans de Goede as ahci-platform maintainer 21 July 2014, 18:25:44 UTC
5b2b9d7 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "These are mostly PPC changes for 3.16-new things. However, there is an x86 change too and it is a regression from 3.14. As it only affects nested virtualization and there were other changes in this area in 3.16, I am not nominating it for 3.15-stable" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Check for nested events if there is an injectable interrupt KVM: PPC: RTAS: Do byte swaps explicitly KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() PPC: Add _GLOBAL_TOC for 32bit KVM: PPC: BOOK3S: HV: Use base page size when comparing against slb value KVM: PPC: Book3E: Unlock mmu_lock when setting caching atttribute 21 July 2014, 18:19:18 UTC
80d6191 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of last minute bug fixes for 3.16, including a fix for ptrace to close a hole which allowed a user space program to write to the kernel address space" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix restore of invalid floating-point-control s390/zcrypt: improve device probing for zcrypt adapter cards s390/ptrace: fix PSW mask check s390/MSI: Use standard mask and unmask funtions s390/3270: correct size detection with the read-partition command s390: require mvcos facility, not tod clock steering facility 21 July 2014, 18:18:31 UTC
a0d036b drm/i915: Reorder the semaphore deadlock check, again commit 4be173813e57c7298103a83155c2391b5b167b4c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 6 10:22:29 2014 +0100 drm/i915: Reorder semaphore deadlock check did the majority of the work, but it missed one crucial detail: The check for the unkickable deadlock on this ring must come after the check whether the ring that we are waiting on has already passed its target seqno. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80709 Tested-by: Stefan Huber <shuber@sthu.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 21 July 2014, 17:29:49 UTC
730a336 drm/radeon/TN: only enable bapm on MSI systems There still seem to be stability problems with other systems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=72921 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 21 July 2014, 17:17:39 UTC
cc9e67e drm/radeon: fix VM IB handling Calling radeon_vm_bo_find on the IB BO during CS is illegal and can lead to an crash. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 21 July 2014, 17:17:38 UTC
036bf46 drm/radeon: fix handling of radeon_vm_bo_rmv v3 v3: completely rewritten. We now just remember which areas of the PT to clear and do so on the next command submission. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=79980 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 21 July 2014, 17:17:38 UTC
20b2656 drm/radeon: let's use GB for vm_size (v2) VM sizes smaller than 1GB doesn't make much sense anyway. v2: fix typo and grammer Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 21 July 2014, 17:17:37 UTC
51cbe7e x86, MCE: Robustify mcheck_init_device BorisO reports that misc_register() fails often on xen. The current code unregisters the CPU hotplug notifier in that case. If then a CPU is offlined and onlined back again, we end up with a second timer running on that CPU, leading to soft lockups and system hangs. So let's leave the hotcpu notifier always registered - even if mce_device_create failed for some cores and never unreg it so that we can deal with the timer handling accordingly. Reported-and-Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1403274493-1371-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Borislav Petkov <bp@suse.de> 21 July 2014, 16:14:32 UTC
58d4e21 tracing: Fix wraparound problems in "uptime" trace clock The "uptime" trace clock added in: commit 8aacf017b065a805d27467843490c976835eb4a5 tracing: Add "uptime" trace clock that uses jiffies has wraparound problems when the system has been up more than 1 hour 11 minutes and 34 seconds. It converts jiffies to nanoseconds using: (u64)jiffies_to_usecs(jiffy) * 1000ULL but since jiffies_to_usecs() only returns a 32-bit value, it truncates at 2^32 microseconds. An additional problem on 32-bit systems is that the argument is "unsigned long", so fixing the return value only helps until 2^32 jiffies (49.7 days on a HZ=1000 system). Avoid these problems by using jiffies_64 as our basis, and not converting to nanoseconds (we do convert to clock_t because user facing API must not be dependent on internal kernel HZ values). Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com Cc: stable@vger.kernel.org # 3.10+ Fixes: 8aacf017b065 "tracing: Add "uptime" trace clock that uses jiffies" Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 21 July 2014, 13:56:12 UTC
35df3b2 batman-adv: fix TT VLAN inconsistency on VLAN re-add When a VLAN interface (on top of batX) is removed and re-added within a short timeframe TT does not have enough time to properly cleanup. This creates an internal TT state mismatch as the newly created softif_vlan will be initialized from scratch with a TT client count of zero (even if TT entries for this VLAN still exist). The resulting TT messages are bogus due to the counter / tt client listing mismatch, thus creating inconsistencies on every node in the network To fix this issue destroy_vlan() has to not free the VLAN object immediately but it has to be kept alive until all the TT entries for this VLAN have been removed. destroy_vlan() still removes the sysfs folder so that the user has the feeling that everything went fine. If the same VLAN is re-added before the old object is free'd, then the latter is resurrected and re-used. Implement such behaviour by increasing the reference counter of a softif_vlan object every time a new local TT entry for such VLAN is created and remove the object from the list only when all the TT entries have been destroyed. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> 21 July 2014, 07:49:30 UTC
d46b6bf batman-adv: drop QinQ claim frames in bridge loop avoidance Since bridge loop avoidance only supports untagged or simple 802.1q tagged VLAN claim frames, claim frames with stacked VLAN headers (QinQ) should be detected and dropped. Transporting the over the mesh may cause problems on the receivers, or create bogus entries in the local tt tables. Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> 21 July 2014, 07:05:31 UTC
640d7ef dns_resolver: Null-terminate the right string *_result[len] is parsed as *(_result[len]) which is not at all what we want to touch here. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 84a7c0b1db1c ("dns_resolver: assure that dns_query() result is null-terminated") Signed-off-by: David S. Miller <davem@davemloft.net> 21 July 2014, 05:33:32 UTC
9a3c414 Linux 3.16-rc6 21 July 2014, 04:04:16 UTC
653bbf1 Merge branch 'xen-netback' Zoltan Kiss says: ==================== xen-netback: Fixing up xenvif_tx_check_gop This series fixes a lot of bugs on the error path around this function, which were introduced with my grant mapping series in 3.15. They apply to the latest net tree, but probably to net-next as well without any modification. I'll post an another series which applies to 3.15 stable, as the problem was first discovered there. The only difference is that the "queue" variable name is replaced to "vif". ==================== Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Signed-off-by: David S. Miller <davem@davemloft.net> 21 July 2014, 03:56:53 UTC
d8cfbfc xen-netback: Fix pointer incrementation to avoid incorrect logging Due to this pointer is increased prematurely, the error log contains rubbish. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net> 21 July 2014, 03:56:06 UTC
1b860da xen-netback: Fix releasing header slot on error path This patch makes this function aware that the first frag and the header might share the same ring slot. That could happen if the first slot is bigger than PKT_PROT_LEN. Due to this the error path might release that slot twice or never, depending on the error scenario. xenvif_idx_release is also removed from xenvif_idx_unmap, and called separately. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net> 21 July 2014, 03:56:06 UTC
b42cc6e xen-netback: Fix releasing frag_list skbs in error path When the grant operations failed, the skb is freed up eventually, and it tries to release the frags, if there is any. For the main skb nr_frags is set to 0 to avoid this, but on the frag_list it iterates through the frags array, and tries to call put_page on the page pointer which contains garbage at that time. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net> 21 July 2014, 03:56:06 UTC
1a998d3 xen-netback: Fix handling frag_list on grant op error path The error handling for skb's with frag_list was completely wrong, it caused double unmap attempts to happen if the error was on the first skb. Move it to the right place in the loop. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net> 21 July 2014, 03:56:05 UTC
back to top