https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
bfe01a5 Linux 3.17 05 October 2014, 19:23:04 UTC
ef0a599 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of two small fixes, both to code which went in during the merge window: cxgb4i has a scheduling in atomic bug in its new ipv6 code and uas fails to work properly with the new scsi-mq code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] uas: disable use of blk-mq I/O path [SCSI] cxgb4i: avoid holding mutex in interrupt context 05 October 2014, 17:16:11 UTC
7b6ea43 Merge tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux Pull kconfig fixes for tiny setups from Josh Triplett: "Two Kconfig bugfixes for 3.17 related to tinification. These fixes make the Kconfig "General Setup" menu much more usable" * tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux: init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu init/Kconfig: Hide printk log config if CONFIG_PRINTK=n 04 October 2014, 16:32:47 UTC
62b4d20 init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu commit 03b8c7b623c80af264c4c8d6111e5c6289933666 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> 03 October 2014, 23:49:43 UTC
361e9df init/Kconfig: Hide printk log config if CONFIG_PRINTK=n The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> 03 October 2014, 23:49:38 UTC
126d457 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two i2c driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qup: Fix order of runtime pm initialization i2c: rk3x: fix 0 length write transfers 03 October 2014, 21:20:44 UTC
0390019 Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace ring buffer iterator fix from Steven Rostedt: "While testing some new changes for 3.18, I kept hitting a bug every so often in the ring buffer. At first I thought it had to do with some of the changes I was working on, but then testing something else I realized that the bug was in 3.17 itself. I ran several bisects as the bug was not very reproducible, and finally came up with the commit that I could reproduce easily within a few minutes, and without the change I could run the tests over an hour without issue. The change fit the bug and I figured out a fix. That bad commit was: Commit 651e22f2701b "ring-buffer: Always reset iterator to reader page" This commit fixed a bug, but in the process created another one. It used the wrong value as the cached value that is used to see if things changed while an iterator was in use. This made it look like a change always happened, and could cause the iterator to go into an infinite loop" * tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Fix infinite spin in reading buffer 03 October 2014, 20:31:57 UTC
7d1419f Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs/smb3 fixes from Steve French: "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression) and for incorrectly closing file handle in symlink error cases" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix readpages retrying on reconnects Fix problem recognizing symlinks 03 October 2014, 20:09:57 UTC
ee042ec Merge tag 'md/3.17-final-fix' of git://neil.brown.name/md Pull raid5 discard fix from Neil Brown: "One fix for raid5 discard issue" * tag 'md/3.17-final-fix' of git://neil.brown.name/md: md/raid5: disable 'DISCARD' by default due to safety concerns. 03 October 2014, 15:40:37 UTC
80ad99d Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too major or scary. One i915 regression fix, nouveau has a tmds regression fix, along with a regression fix for the runtime pm code for optimus laptops not restoring the display hw correctly" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: make sure display hardware is reinitialised on runtime resume drm/nouveau: punt fbcon resume out to a workqueue drm/nouveau: fix regression on original nv50 board drm/nv50/disp: fix dpms regression on certain boards drm/i915: Flush the PTEs after updating them before suspend 03 October 2014, 15:31:14 UTC
2c2d831 [SCSI] uas: disable use of blk-mq I/O path The uas driver uses the block layer tag for USB3 stream IDs. With blk-mq we can get larger tag numbers that the queue depth, which breaks this assumption. A fix is under way for 3.18, but sits on top of large changes so can't easily be backported. Set the disable_blk_mq path so that a uas device can't easily crash the system when using blk-mq for SCSI. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 03 October 2014, 09:27:58 UTC
5858686 Merge tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 / ACPI) and one trivial fix for a callback return value mismatch in the cpufreq integrator driver. Specifics: - A recent cpufreq core fix went too far and introduced a regression in the system suspend code path. Fix from Viresh Kumar. - An ACPI-related commit in the i915 driver that fixed backlight problems for some Thinkpads inadvertently broke a Dell machine (in 3.16). Fix from Aaron Lu. - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit that put wait_event() under a spinlock by mistake. Fix that (Rafael J Wysocki). - The return value type of integrator_cpufreq_remove() is void, but should be int. Fix from Arnd Bergmann" * tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: update 'cpufreq_suspended' after stopping governors ACPI / i915: Update the condition to ignore firmware backlight change request cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock 03 October 2014, 01:47:28 UTC
eee0815 Merge tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel into drm-fixes final regression fix for 3.17. * tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Flush the PTEs after updating them before suspend 03 October 2014, 01:38:16 UTC
86b59bb i2c: qup: Fix order of runtime pm initialization The runtime pm calls need to be done before populating the children via the i2c_add_adapter call. If this is not done, a child can run into issues trying to do i2c read/writes due to the pm_runtime_sync failing. Signed-off-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 03 October 2014, 01:20:47 UTC
cf27020 i2c: rk3x: fix 0 length write transfers i2cdetect -q was broken (everything was a false positive, and no transfers were actually being sent over i2c). The way it works is by sending a 0 length write request and checking for NACK. This patch fixes the 0 length writes and actually sends them. Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 03 October 2014, 01:18:53 UTC
abcaddd Merge branches 'pm-cpufreq' and 'acpi-video' * pm-cpufreq: cpufreq: update 'cpufreq_suspended' after stopping governors cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock * acpi-video: ACPI / i915: Update the condition to ignore firmware backlight change request 03 October 2014, 01:10:07 UTC
f929d39 Merge branch 'akpm' (fixes from Andrew Morton) Merge fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: page_alloc: fix zone allocation fairness on UP perf: fix perf bug in fork() MAINTAINERS: change git URL for mpc5xxx tree mm: memcontrol: do not iterate uninitialized memcgs ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handler 02 October 2014, 23:29:19 UTC
abe5f97 mm: page_alloc: fix zone allocation fairness on UP The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760fc15 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy") Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 23:28:44 UTC
6c72e35 perf: fix perf bug in fork() Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by calling perf_event_free_task() when failing sched_fork() we will not yet have done the memset() on ->perf_event_ctxp[] and will therefore try and 'free' the inherited contexts, which are still in use by the parent process. This is bad.. Suggested-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 23:28:44 UTC
cba5b1c MAINTAINERS: change git URL for mpc5xxx tree The repository for mpc5xxx has been moved, update git URL to new location. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 23:28:44 UTC
2f7dd7a mm: memcontrol: do not iterate uninitialized memcgs The cgroup iterators yield css objects that have not yet gone through css_online(), but they are not complete memcgs at this point and so the memcg iterators should not return them. Commit d8ad30559715 ("mm/memcg: iteration skip memcgs not yet fully initialized") set out to implement exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does not meet the ordering requirements for memcg, and so the iterator may skip over initialized groups, or return partially initialized memcgs. The cgroup core can not reasonably provide a clear answer on whether the object around the css has been fully initialized, as that depends on controller-specific locking and lifetime rules. Thus, introduce a memcg-specific flag that is set after the memcg has been initialized in css_online(), and read before mem_cgroup_iter() callers access the memcg members. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 23:28:44 UTC
55dacd2 ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handler In dlm_assert_master_handler, the mle is get in dlm_find_mle, should be put when goto kill, otherwise, this mle will never be released. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 23:28:44 UTC
b601ce0 Merge tag 'media/v3.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "One last time regression fix at em28xx. The removal of .reset_resume broke suspend/resume on this driver for some devices. There are more fixes to be done for em28xx suspend/resume to be better handled, but I'm opting to let them to stay for a while at the media devel tree, in order to get more tests. So, for now, let's just revert this patch" * tag 'media/v3.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: Revert "[media] media: em28xx - remove reset_resume interface" 02 October 2014, 23:10:38 UTC
24607f1 ring-buffer: Fix infinite spin in reading buffer Commit 651e22f2701b "ring-buffer: Always reset iterator to reader page" fixed one bug but in the process caused another one. The reset is to update the header page, but that fix also changed the way the cached reads were updated. The cache reads are used to test if an iterator needs to be updated or not. A ring buffer iterator, when created, disables writes to the ring buffer but does not stop other readers or consuming reads from happening. Although all readers are synchronized via a lock, they are only synchronized when in the ring buffer functions. Those functions may be called by any number of readers. The iterator continues down when its not interrupted by a consuming reader. If a consuming read occurs, the iterator starts from the beginning of the buffer. The way the iterator sees that a consuming read has happened since its last read is by checking the reader "cache". The cache holds the last counts of the read and the reader page itself. Commit 651e22f2701b changed what was saved by the cache_read when the rb_iter_reset() occurred, making the iterator never match the cache. Then if the iterator calls rb_iter_reset(), it will go into an infinite loop by checking if the cache doesn't match, doing the reset and retrying, just to see that the cache still doesn't match! Which should never happen as the reset is suppose to set the cache to the current value and there's locks that keep a consuming reader from having access to the data. Fixes: 651e22f2701b "ring-buffer: Always reset iterator to reader page" Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 02 October 2014, 20:51:18 UTC
80ec7ce Merge branch 'parisc-3.17-8' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "One late but trivial patch to fix the serial console on parisc machines which got broken during the 3.17 release cycle" * 'parisc-3.17-8' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix serial console for machines with serial port on superio chip 02 October 2014, 19:23:10 UTC
1209bbd CIFS: Fix readpages retrying on reconnects If we got a reconnect error from async readv we re-add pages back to page_list and continue loop. That is wrong because these pages have been already added to the pagecache but page_list has pages that have not been added to the pagecache yet. This ends up with a general protection fault in put_pages after readpages. Fix it by not retrying the read of these pages and falling back to readpage instead. Fixes debian bug 762306 Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net> 02 October 2014, 19:17:41 UTC
19e8157 Fix problem recognizing symlinks Changeset eb85d94bd introduced a problem where if a cifs open fails during query info of a file we will still try to close the file (happens with certain types of reparse points) even though the file handle is not valid. In addition for SMB2/SMB3 we were not mapping the return code returned by Windows when trying to open a file (like a Windows NFS symlink) which is a reparse point. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> CC: stable <stable@vger.kernel.org> #v3.13+ 02 October 2014, 19:10:04 UTC
f9220c2 Merge branch 'numa-migration-fixes' (fixes from Mel Gorman) Merge NUMA balancing related fixlets from Mel Gorman: "There were a few minor changes so am resending just the two patches that are mostly likely to affect the bug Dave and Sasha saw and marked them for stable. I'm less confident it will address Sasha's problem because while I have not kept up to date, I believe he's also seeing memory corruption issues in next from an unknown source. Still, it would be nice to see how they affect trinity testing. I'll send the MPOL_MF_LAZY patch separately because it's not urgent" * emailed patches from Mel Gorman <mgorman@suse.de>: mm: numa: Do not mark PTEs pte_numa when splitting huge pages mm: migrate: Close race between migration completion and mprotect 02 October 2014, 18:57:52 UTC
abc40bd mm: numa: Do not mark PTEs pte_numa when splitting huge pages This patch reverts 1ba6e0b50b ("mm: numa: split_huge_page: transfer the NUMA type from the pmd to the pte"). If a huge page is being split due a protection change and the tail will be in a PROT_NONE vma then NUMA hinting PTEs are temporarily created in the protected VMA. VM_RW|VM_PROTNONE |-----------------| ^ split here In the specific case above, it should get fixed up by change_pte_range() but there is a window of opportunity for weirdness to happen. Similarly, if a huge page is shrunk and split during a protection update but before pmd_numa is cleared then a pte_numa can be left behind. Instead of adding complexity trying to deal with the case, this patch will not mark PTEs NUMA when splitting a huge page. NUMA hinting faults will not be triggered which is marginal in comparison to the complexity in dealing with the corner cases during THP split. Cc: stable@vger.kernel.org Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 18:57:18 UTC
d3cb8bf mm: migrate: Close race between migration completion and mprotect A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed as mprotect marks write-migration-entries as read. It means that potentially we take a spurious fault to mark PTEs write again but it's straight-forward. However, there is a race between write migrations being marked read and migrations finishing. This potentially allows a PTE to be write that should have been read. Close this race by double checking the VMA permissions using maybe_mkwrite when migration completes. [torvalds@linux-foundation.org: use maybe_mkwrite] Cc: stable@vger.kernel.org Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 October 2014, 18:57:18 UTC
7575e4d Merge tag 'sound-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few pending bits of random fixes in ASoC. Nothing exciting, but would be nice to be merged in 3.17, as most of them are also for stable kernels" * tag 'sound-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: ssm2602: do not hardcode type to SSM2602 ASoC: core: fix possible ZERO_SIZE_PTR pointer dereferencing error. MAINTAINERS: add atmel audio alsa driver maintainer entry ASoC: rt286: Fix sync function ASoC: rt286: Correct default value ASoC: soc-compress: fix double unlock of fe card mutex ASoC: fsl_ssi: fix kernel panic in probe function 02 October 2014, 16:42:28 UTC
19318c0 Merge branch 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes A few regression fixes, the runpm ones dating back to 3.15. Also a fairly severe TMDS regression that effected a lot of GF8/9/GT2xx users. * 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: make sure display hardware is reinitialised on runtime resume drm/nouveau: punt fbcon resume out to a workqueue drm/nouveau: fix regression on original nv50 board drm/nv50/disp: fix dpms regression on certain boards 02 October 2014, 04:48:20 UTC
50dddff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Don't halt the firmware in r8152 driver, from Hayes Wang. 2) Handle full sized 802.1ad frames in bnx2 and tg3 drivers properly, from Vlad Yasevich. 3) Don't sleep while holding tx_clean_lock in netxen driver, fix from Manish Chopra. 4) Certain kinds of ipv6 routes can end up endlessly failing the route validation test, causing it to be re-looked up over and over again. This particularly kills input route caching in TCP sockets. Fix from Hannes Frederic Sowa. 5) netvsc_start_xmit() has a use-after-free access to skb->len, fix from K Y Srinivasan. 6) Fix matching of inverted containers in ematch module, from Ignacy Gawędzki. 7) Aggregation of GRO frames via SKB ->frag_list for linear skbs isn't handled properly, regression fix from Eric Dumazet. 8) Don't test return value of ipv4_neigh_lookup(), which returns an error pointer, against NULL. From WANG Cong. 9) Fix an old regression where we mistakenly allow a double add of the same tunnel. Fixes from Steffen Klassert. 10) macvtap device delete and open can run in parallel and corrupt lists etc., fix from Vlad Yasevich. 11) Fix build error with IPV6=m NETFILTER_XT_TARGET_TPROXY=y, from Pablo Neira Ayuso. 12) rhashtable_destroy() triggers lockdep splats, fix also from Pablo. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) bna: Update Maintainer Email r8152: disable power cut for RTL8153 r8152: remove clearing bp bnx2: Correctly receive full sized 802.1ad fragmes tg3: Allow for recieve of full-size 8021AD frames r8152: fix setting RTL8152_UNPLUG netxen: Fix bug in Tx completion path. netxen: Fix BUG "sleeping function called from invalid context" ipv6: remove rt6i_genid hyperv: Fix a bug in netvsc_start_xmit() net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selected ematch: Fix matching of inverted containers. gro: fix aggregation for skb using frag_list neigh: check error pointer instead of NULL for ipv4_neigh_lookup() ip6_gre: Return an error when adding an existing tunnel. ip6_vti: Return an error when adding an existing tunnel. ip6_tunnel: Return an error when adding an existing tunnel. ip6gre: add a rtnl link alias for ip6gretap net/mlx4_core: Allow not to specify probe_vf in SRIOV IB mode r8152: fix the carrier off when autoresuming ... 02 October 2014, 04:29:06 UTC
8e0e99b md/raid5: disable 'DISCARD' by default due to safety concerns. It has come to my attention (thanks Martin) that 'discard_zeroes_data' is only a hint. Some devices in some cases don't do what it says on the label. The use of DISCARD in RAID5 depends on reads from discarded regions being predictably zero. If a write to a previously discarded region performs a read-modify-write cycle it assumes that the parity block was consistent with the data blocks. If all were zero, this would be the case. If some are and some aren't this would not be the case. This could lead to data corruption after a device failure when data needs to be reconstructed from the parity. As we cannot trust 'discard_zeroes_data', ignore it by default and so disallow DISCARD on all raid4/5/6 arrays. As many devices are trustworthy, and as there are benefits to using DISCARD, add a module parameter to over-ride this caution and cause DISCARD to work if discard_zeroes_data is set. If a site want to enable DISCARD on some arrays but not on others they should select DISCARD support at the filesystem level, and set the raid456 module parameter. raid456.devices_handle_discard_safely=Y As this is a data-safety issue, I believe this patch is suitable for -stable. DISCARD support for RAID456 was added in 3.7 Cc: Shaohua Li <shli@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Heinz Mauelshagen <heinzm@redhat.com> Cc: stable@vger.kernel.org (3.7+) Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Fixes: 620125f2bf8ff0c4969b79653b54d7bcc9d40637 Signed-off-by: NeilBrown <neilb@suse.de> 02 October 2014, 03:45:00 UTC
6fbb702 drm/nouveau: make sure display hardware is reinitialised on runtime resume Linus commit 05c63c2ff23a80b654d6c088ac3ba21628db0173 modified the runtime suspend/resume paths to skip over display-related tasks to avoid locking issues on resume. Unfortunately, this resulted in the display hardware being left in a partially initialised state, preventing subsequent modesets from completing. This commit unifies the (many) suspend/resume paths, bringing back display (and fbcon) handling in the runtime paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 02 October 2014, 03:32:24 UTC
634ffcc drm/nouveau: punt fbcon resume out to a workqueue Preparation for some runtime pm fixes. Currently we skip over fbcon suspend/resume in the runtime path, which causes issues on resume if fbcon tries to write to the framebuffer before the BAR subdev has been resumed to restore the BAR1 VM setup. As we might be woken up via a sysfs connector, we are unable to call fb_set_suspend() in the resume path as it could make its way down to a modeset and cause all sorts of locking hilarity. To solve this, we'll just delay the fbcon resume to a workqueue. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 02 October 2014, 03:32:24 UTC
f2f9a2c drm/nouveau: fix regression on original nv50 board Xorg (and any non-DRM client really) doesn't have permission to directly touch VRAM on nv50 and up, which the fence code prior to g84 depends on. It's less invasive to temporarily grant it premission to do so, as it previously did, than it is to rework fencenv50 to use the VM. That will come later on. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 02 October 2014, 03:32:24 UTC
5838ae6 drm/nv50/disp: fix dpms regression on certain boards Reported in fdo#82527 comment #2. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 02 October 2014, 03:32:23 UTC
439e957 bna: Update Maintainer Email Update the maintainer email for BNA driver. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 October 2014, 02:13:41 UTC
0754476 Merge branch 'r8152' Hayes Wang says: ==================== r8152: patches about firmware The patches fix the issues when the firmware exists. For the multiple OS, the firmware may be loaded by the driver of the other OS. And the Linux driver has influences on it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 October 2014, 20:46:41 UTC
49be172 r8152: disable power cut for RTL8153 The firmware would be clear when the power cut is enabled for RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 October 2014, 20:46:34 UTC
204c870 r8152: remove clearing bp The xxx_clear_bp() is used to halt the firmware. It only necessary for updating the new firmware. Besides, depend on the version of the current firmware, it may have problem to halt the firmware directly. Finally, halt the firmware would let the firmware code useless, and the bugs which are fixed by the firmware would occur. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 October 2014, 20:46:34 UTC
1b0ecb2 bnx2: Correctly receive full sized 802.1ad fragmes This driver, similar to tg3, has a check that will cause full sized 802.1ad frames to be dropped. The frame will be larger then the standard mtu due to the presense of vlan header that has not been stripped. The driver should not drop this frame and should process it just like it does for 802.1q. CC: Sony Chacko <sony.chacko@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 October 2014, 20:43:45 UTC
7d3083e tg3: Allow for recieve of full-size 8021AD frames When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by: Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 October 2014, 20:43:45 UTC
a44f867 Merge branch 'for-3.17' of git://linux-nfs.org/~bfields/linux Pull nfsd bugfix from Bruce Fields: "This fixes a data corruption bug introduced by the v3.16 xdr encoding rewrite. I haven't managed to reproduce it myself yet, but it's apparently not hard to hit given the right workload" * 'for-3.17' of git://linux-nfs.org/~bfields/linux: nfsd4: fix corruption of NFSv4 read data 01 October 2014, 20:22:00 UTC
3edfe00 parisc: Fix serial console for machines with serial port on superio chip Fix the serial console on machines where the serial port is located on the SuperIO chip. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Peter Hurley <peter@hurleysoftware.com> 01 October 2014, 20:12:50 UTC
078efae [SCSI] cxgb4i: avoid holding mutex in interrupt context cxgbi_inet6addr_handler() can be called in interrupt context, so use rcu protected list while finding netdev. This is observed as a scheduling in atomic oops when running over ipv6. Fixes: fc8d0590d914 ("libcxgbi: Add ipv6 api to driver") Fixes: 759a0cc5a3e1 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 01 October 2014, 17:40:22 UTC
b7c2dc8 Merge tag 'asoc-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix SSM2602 device identification Another fix for v3.17, fixing device identification after the split out of the I2C and SPI code. 01 October 2014, 07:29:26 UTC
aad7fb9 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Some further ARM fixes: - another build fix for the kprobes test code - a fix for no kuser helpers for the set_tls code, which oopsed on noMMU hardware - a fix for alignment handler with neon opcodes being misinterpreted - turning off the hardware access support, which is not implemented - a build fix for the v7 coherency exiting code, which can be built in non-v7 environments (but still only executed on v7 CPUs)" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8179/1: kprobes-test: Fix compile error "bad immediate value for offset" ARM: 8178/1: fix set_tls for !CONFIG_KUSER_HELPERS ARM: 8177/1: cacheflush: Fix v7_exit_coherency_flush exynos build breakage on ARMv6 ARM: 8165/1: alignment: don't break misaligned NEON load/store ARM: 8164/1: mm: clear SCTLR.HA instead of setting it for LPAE 01 October 2014, 02:52:08 UTC
f561de3 r8152: fix setting RTL8152_UNPLUG The flag of RTL8152_UNPLUG should only be set when the device is unplugged, not each time the rtl8152_disconnect() is called. Otherwise, the device wouldn't be stopped normally. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2014, 20:23:51 UTC
37b9a26 Merge branch 'netxen' Manish Chopra says: ==================== netxen: Bug fixes. This series fixes some TX specific issues. * Move spin_lock(tx_clean_lock) in down path to fix atomic sleep bug (Reported by Mike Galbraith). * Fix hang in interface down while running traffic. Please consider applying this to 'net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2014, 20:22:51 UTC
9295f94 netxen: Fix bug in Tx completion path. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Due to this interface down path gets stuck forever waiting for NAPI to complete. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2014, 20:22:44 UTC
0d36882 netxen: Fix BUG "sleeping function called from invalid context" o __netxen_nic_down() function might sleep while holding spinlock_t(tx_clean_lock). Acquire this lock for only releasing TX buffers instead of taking it for whole down path. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2014, 20:22:43 UTC
15b23ef nfsd4: fix corruption of NFSv4 read data The calculation of page_ptr here is wrong in the case the read doesn't start at an offset that is a multiple of a page. The result is that nfs4svc_encode_compoundres sets rq_next_page to a value one too small, and then the loop in svc_free_res_pages may incorrectly fail to clear a page pointer in rq_respages[]. Pages left in rq_respages[] are available for the next rpc request to use, so xdr data may be written to that page, which may hold data still waiting to be transmitted to the client or data in the page cache. The observed result was silent data corruption seen on an NFSv4 client. We tag this as "fixing" 05638dc73af2 because that commit exposed this bug, though the incorrect calculation predates it. Particular thanks to Andrea Arcangeli and David Gilbert for analysis and testing. Fixes: 05638dc73af2 "nfsd4: simplify server xdr->next_page use" Cc: stable@vger.kernel.org Reported-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> 30 September 2014, 19:57:04 UTC
b1b12ba cpufreq: update 'cpufreq_suspended' after stopping governors Commit 8e30444e1530 ("cpufreq: fix cpufreq suspend/resume for intel_pstate") introduced a bug where the governors wouldn't be stopped anymore for ->target{_index}() drivers during suspend. This happens because 'cpufreq_suspended' is updated before stopping the governors during suspend and due to this __cpufreq_governor() would return early due to this check: /* Don't start any governor operations if we are entering suspend */ if (cpufreq_suspended) return 0; Fixes: 8e30444e1530 ("cpufreq: fix cpufreq suspend/resume for intel_pstate") Cc: 3.15+ <stable@vger.kernel.org> # 3.15+: 8e30444e1530 "cpufreq: fix cpufreq suspend/resume for intel_pstate" Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 30 September 2014, 19:02:34 UTC
705f1c8 ipv6: remove rt6i_genid Eric Dumazet noticed that all no-nonexthop or no-gateway routes which are already marked DST_HOST (e.g. input routes routes) will always be invalidated during sk_dst_check. Thus per-socket dst caching absolutely had no effect and early demuxing had no effect. Thus this patch removes rt6i_genid: fn_sernum already gets modified during add operations, so we only must ensure we mutate fn_sernum during ipv6 address remove operations. This is a fairly cost extensive operations, but address removal should not happen that often. Also our mtu update functions do the same and we heard no complains so far. xfrm policy changes also cause a call into fib6_flush_trees. Also plug a hole in rt6_info (no cacheline changes). I verified via tracing that this change has effect. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2014, 18:00:48 UTC
ad684dc ARM: 8179/1: kprobes-test: Fix compile error "bad immediate value for offset" When compiling kprobes-test-arm.c the following error has been observed /tmp/ccoT403o.s:21439: Error: bad immediate value for offset (4168) This is caused by the compiler spilling it's literal pool too far away from the site which is trying to reference it with a PC relative load. This arises because the compiler is underestimating the size of the inline assembler code present, which apparently it approximates as 4 bytes per line or instruction. We fix this problem by moving the operations which generate more than 4 bytes out of the text section. Specifically, moving the .ascii directives to the .rodata section. Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 30 September 2014, 15:55:24 UTC
9cc6d9e ARM: 8178/1: fix set_tls for !CONFIG_KUSER_HELPERS Joachim Eastwood reports that commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee register state during exec" causes a boot-time crash on a Cortex-M4 nommu system: Freeing unused kernel memory: 68K (281e5000 - 281f6000) Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 task: 29834000 ti: 29832000 task.ti: 29832000 PC is at flush_thread+0x2e/0x40 LR is at flush_thread+0x21/0x40 pc : [<2800954a>] lr : [<2800953d>] psr: 4100000b sp : 29833d60 ip : 00000000 fp : 00000001 r10: 00003cf8 r9 : 29b1f000 r8 : 00000000 r7 : 29b0bc00 r6 : 29834000 r5 : 29832000 r4 : 29832000 r3 : ffff0ff0 r2 : 29832000 r1 : 00000000 r0 : 282121f0 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 [<2800afa5>] (unwind_backtrace) from [<2800a327>] (show_stack+0xb/0xc) [<2800a327>] (show_stack) from [<2800a963>] (__invalid_entry+0x4b/0x4c) The problem is that set_tls is attempting to clear the TLS location in the kernel-user helper page, which isn't set up on V7M. Fix this by guarding the write to the kuser helper page with a CONFIG_KUSER_HELPERS ifdef. Fixes: fbfb872f5f41 ARM: 8148/1: flush TLS and thumbee register state during exec Reported-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 30 September 2014, 15:55:23 UTC
ebc7725 ARM: 8177/1: cacheflush: Fix v7_exit_coherency_flush exynos build breakage on ARMv6 This fixes build breakage of platsmp.c if ARMv6 was chosen for compile time options (e.g. by building allmodconfig): $ make allmodconfig $ make CC arch/arm/mach-exynos/platsmp.o /tmp/ccdQM0Eg.s: Assembler messages: /tmp/ccdQM0Eg.s:432: Error: selected processor does not support ARM mode `isb ' /tmp/ccdQM0Eg.s:437: Error: selected processor does not support ARM mode `isb ' /tmp/ccdQM0Eg.s:438: Error: selected processor does not support ARM mode `dsb ' make[1]: *** [arch/arm/mach-exynos/platsmp.o] Error 1 The error was introduced in commit "ARM: EXYNOS: Move code from hotplug.c to platsmp.c". Previously code using v7_exit_coherency_flush() macro was built with '-march=armv7-a' flag but this flag dissapeared during the movement. Fix this by annotating the v7_exit_coherency_flush() asm code with armv7-a architecture. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 30 September 2014, 15:55:22 UTC
fe2a08b ASoC: ssm2602: do not hardcode type to SSM2602 The correct type (SSM2602/SSM2603/SSM2604) is passed down from the ssm2602_spi_probe()/ssm2602_spi_probe() functions, so use that instead of hardcoding it to SSM2602 in ssm2602_probe(). Fixes: c924dc68f737 ("ASoC: ssm2602: Split SPI and I2C code into different modules") Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org 30 September 2014, 12:27:19 UTC
5498380 Merge tag 'asoc-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.17 A few small driver specific fixes and a couple of error handling fixes in the core. 30 September 2014, 08:24:05 UTC
dedb845 hyperv: Fix a bug in netvsc_start_xmit() After the packet is successfully sent, we should not touch the skb as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. In this version of the patch I have fixed issues pointed out by David. David, please queue this up for stable. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2014, 05:21:03 UTC
77076c7 ACPI / i915: Update the condition to ignore firmware backlight change request Some of the Thinkpads' firmware will issue a backlight change request through i915 operation region unconditionally on AC plug/unplug, the backlight level used is arbitrary and thus should be ignored. This is handled by commit 0b9f7d93ca61 (ACPI / i915: ignore firmware requests for backlight change). Then there is a Dell laptop whose vendor backlight interface also makes use of operation region to change backlight level and with the above commit, that interface no long works. The condition used to ignore the backlight change request from firmware is thus changed to: if the vendor backlight interface is not in use and the ACPI backlight interface is broken, we ignore the requests; oterwise, we keep processing them. Fixes: 0b9f7d93ca61 (ACPI / i915: ignore firmware requests for backlight change) Link: https://lkml.org/lkml/2014/9/23/854 Reported-and-tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 September 2014, 23:11:18 UTC
c5bb86c net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selected When the CONFIG_HAVE_CLK is selected for the system, the stmmac_pci_probe will fail with dmesg: [ 2.167225] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002) [ 2.178267] stmmaceth 0000:00:14.6: enabling bus mastering [ 2.178436] stmmaceth 0000:00:14.6: irq 24 for MSI/MSI-X [ 2.178703] stmmaceth 0000:00:14.6: stmmac_dvr_probe: warning: cannot get CSR clock [ 2.186503] stmmac_pci_probe: main driver probe failed [ 2.194003] stmmaceth 0000:00:14.6: disabling bus mastering [ 2.196473] stmmaceth: probe of 0000:00:14.6 failed with error -2 This patch fix the issue by breaking the dependency to devm_clk_get() as the CSR clock can be obtained at priv->plat->clk_csr from pci driver. Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2014, 20:36:58 UTC
17c9c82 ematch: Fix matching of inverted containers. Negated expressions and sub-expressions need to have their flags checked for TCF_EM_INVERT and their result negated accordingly. Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2014, 19:31:29 UTC
73d3fe6 gro: fix aggregation for skb using frag_list In commit 8a29111c7ca6 ("net: gro: allow to build full sized skb") I added a regression for linear skb that traditionally force GRO to use the frag_list fallback. Erez Shitrit found that at most two segments were aggregated and the "if (skb_gro_len(p) != pinfo->gso_size)" test was failing. This is because pinfo at this spot still points to the last skb in the chain, instead of the first one, where we find the correct gso_size information. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 8a29111c7ca6 ("net: gro: allow to build full sized skb") Reported-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2014, 19:17:59 UTC
91e5649 drm/i915: Flush the PTEs after updating them before suspend As we use WC updates of the PTE, we are responsible for notifying the hardware when to flush its TLBs. Do so after we zap all the PTEs before suspend (and the BIOS tries to read our GTT). Fixes a regression from commit 828c79087cec61eaf4c76bb32c222fbe35ac3930 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Wed Oct 16 09:21:30 2013 -0700 drm/i915: Disable GGTT PTEs on GEN6+ suspend that survived and continue to cause harm even after commit e568af1c626031925465a5caaab7cca1303d55c7 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 26 20:08:20 2014 +0100 drm/i915: Undo gtt scratch pte unmapping again v2: Trivial rebase. v3: Fixes requires pointer dances. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82340 Tested-by: ming.yao@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 29 September 2014, 13:41:17 UTC
d62dbf7 cpufreq: integrator: fix integrator_cpufreq_remove return type When building this driver as a module, we get a helpful warning about the return type: drivers/cpufreq/integrator-cpufreq.c:232:2: warning: initialization from incompatible pointer type .remove = __exit_p(integrator_cpufreq_remove), If the remove callback returns void, the caller gets an undefined value as it expects an integer to be returned. This fixes the problem by passing down the value from cpufreq_unregister_driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 September 2014, 13:36:03 UTC
e65b5dd cpufreq: pcc-cpufreq: Fix wait_event() under spinlock Fix the following bug introduced by commit 8fec051eea73 (cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}) that forgot to move the spin_lock() in pcc_cpufreq_target() past cpufreq_freq_transition_begin() which calls wait_event(): BUG: sleeping function called from invalid context at drivers/cpufreq/cpufreq.c:370 in_atomic(): 1, irqs_disabled(): 0, pid: 2636, name: modprobe Preemption disabled at:[<ffffffffa04d74d7>] pcc_cpufreq_target+0x27/0x200 [pcc_cpufreq] [ 51.025044] CPU: 57 PID: 2636 Comm: modprobe Tainted: G E 3.17.0-default #7 Hardware name: Hewlett-Packard ProLiant DL980 G7, BIOS P66 07/07/2010 00000000ffffffff ffff88026c46b828 ffffffff81589dbd 0000000000000000 ffff880037978090 ffff88026c46b848 ffffffff8108e1df ffff880037978090 0000000000000000 ffff88026c46b878 ffffffff8108e298 ffff88026d73ec00 Call Trace: [<ffffffff81589dbd>] dump_stack+0x4d/0x90 [<ffffffff8108e1df>] ___might_sleep+0x10f/0x180 [<ffffffff8108e298>] __might_sleep+0x48/0xd0 [<ffffffff8145b905>] cpufreq_freq_transition_begin+0x75/0x140 drivers/cpufreq/cpufreq.c:370 wait_event(policy->transition_wait, !policy->transition_ongoing); [<ffffffff8108fc99>] ? preempt_count_add+0xb9/0xc0 [<ffffffffa04d7513>] pcc_cpufreq_target+0x63/0x200 [pcc_cpufreq] drivers/cpufreq/pcc-cpufreq.c:207 spin_lock(&pcc_lock); [<ffffffff810e0d0f>] ? update_ts_time_stats+0x7f/0xb0 [<ffffffff8145be55>] __cpufreq_driver_target+0x85/0x170 [<ffffffff8145e4c8>] od_check_cpu+0xa8/0xb0 [<ffffffff8145ef10>] dbs_check_cpu+0x180/0x1d0 [<ffffffff8145f310>] cpufreq_governor_dbs+0x3b0/0x720 [<ffffffff8145ebe3>] od_cpufreq_governor_dbs+0x33/0xe0 [<ffffffff814593d9>] __cpufreq_governor+0xa9/0x210 [<ffffffff81459fb2>] cpufreq_set_policy+0x1e2/0x2e0 [<ffffffff8145a6cc>] cpufreq_init_policy+0x8c/0x110 [<ffffffff8145c9a0>] ? cpufreq_update_policy+0x1b0/0x1b0 [<ffffffff8108fb99>] ? preempt_count_sub+0xb9/0x100 [<ffffffff8145c6c6>] __cpufreq_add_dev+0x596/0x6b0 [<ffffffffa016c608>] ? pcc_cpufreq_probe+0x4b4/0x4b4 [pcc_cpufreq] [<ffffffff8145c7ee>] cpufreq_add_dev+0xe/0x10 [<ffffffff81408e81>] subsys_interface_register+0xc1/0xf0 [<ffffffff8108fb99>] ? preempt_count_sub+0xb9/0x100 [<ffffffff8145b3d7>] cpufreq_register_driver+0x117/0x2a0 [<ffffffffa016c65d>] pcc_cpufreq_init+0x55/0x9f8 [pcc_cpufreq] [<ffffffffa016c608>] ? pcc_cpufreq_probe+0x4b4/0x4b4 [pcc_cpufreq] [<ffffffff81000298>] do_one_initcall+0xc8/0x1f0 [<ffffffff811a731d>] ? __vunmap+0x9d/0x100 [<ffffffff810eb9a0>] do_init_module+0x30/0x1b0 [<ffffffff810edfa6>] load_module+0x686/0x710 [<ffffffff810ebb20>] ? do_init_module+0x1b0/0x1b0 [<ffffffff810ee1db>] SyS_init_module+0x9b/0xc0 [<ffffffff8158f7a9>] system_call_fastpath+0x16/0x1b Fixes: 8fec051eea73 (cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}) Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 September 2014, 13:35:50 UTC
90a5dbe Revert "[media] media: em28xx - remove reset_resume interface" The reset_resume call is needed, otherwise it will break resume on some conditions, depending on the usb ehci/xhci controller. This reverts commit b89193e0b06f44f48e3bf897a5b5cb4a7aff3359. Reported-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 29 September 2014, 01:25:24 UTC
fe82dce Linux 3.17-rc7 28 September 2014, 21:29:07 UTC
2c1a431 neigh: check error pointer instead of NULL for ipv4_neigh_lookup() Fixes: commit f187bc6efb7250afee0e2009b6106 ("ipv4: No need to set generic neighbour pointer") Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2014, 21:16:04 UTC
4092dc8 Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull slave-dmaengine fixes from Vinod Koul: "Two small fixes for omap dmaengine driver which fixes cyclic suspend and resume" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: omap-dma: Restore the CLINK_CTRL in resume path dmaengine: omap-dma: Add memory barrier to dma_resume path 28 September 2014, 20:45:16 UTC
86fa9c4 Merge branch 'ipv6_tunnel' Steffen Klassert says: ==================== ipv6: Return an error when adding an already existing tunnel The ipv6 tunnel locate functions should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. All our ipv6 tunnels have this bug from the very beginning. Only the sit tunnel was fixed some years ago with: commit 8db99e57175 ("sit: Fail to create tunnel, if it already exists"). This patchset fixes the remaining ipv6 tunnels. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2014, 20:19:52 UTC
cd0a0bd ip6_gre: Return an error when adding an existing tunnel. ip6gre_tunnel_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2014, 20:19:46 UTC
d814b84 ip6_vti: Return an error when adding an existing tunnel. vti6_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2014, 20:19:46 UTC
2b0bb01 ip6_tunnel: Return an error when adding an existing tunnel. ip6_tnl_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2014, 20:19:46 UTC
82b925c Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/compress', 'asoc/fix/core', 'asoc/fix/fsl-ssi' and 'asoc/fix/rt286' into asoc-linus 28 September 2014, 11:25:12 UTC
6596aa0 ASoC: core: fix possible ZERO_SIZE_PTR pointer dereferencing error. Since we cannot make sure the 'params->num_regs' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org 28 September 2014, 10:49:42 UTC
dfae90e MAINTAINERS: add atmel audio alsa driver maintainer entry Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> 28 September 2014, 10:41:39 UTC
1e3827b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes + unifying __d_move() and __d_materialise_dentry() + minimal regression fix for d_path() of victims of overwriting rename() ported on top of that" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Don't exchange "short" filenames unconditionally. fold swapping ->d_name.hash into switch_names() fold unlocking the children into dentry_unlock_parents_for_move() kill __d_materialise_dentry() __d_materialise_dentry(): flip the order of arguments __d_move(): fold manipulations with ->d_child/->d_subdirs don't open-code d_rehash() in d_materialise_unique() pull rehashing and unlocking the target dentry into __d_materialise_dentry() ufs: deal with nfsd/iget races fuse: honour max_read and max_write in direct_io mode shmem: fix nlink for rename overwrite directory 28 September 2014, 00:05:14 UTC
6111da3 Merge branch 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "This is quite late but these need to be backported anyway. This is the fix for a long-standing cpuset bug which existed from 2009. cpuset makes use of PF_SPREAD_{PAGE|SLAB} flags to modify the task's memory allocation behavior according to the settings of the cpuset it belongs to; unfortunately, when those flags have to be changed, cpuset did so directly even whlie the target task is running, which is obviously racy as task->flags may be modified by the task itself at any time. This obscure bug manifested as corrupt PF_USED_MATH flag leading to a weird crash. The bug is fixed by moving the flag to task->atomic_flags. The first two are prepatory ones to help defining atomic_flags accessors and the third one is the actual fix" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flags sched: add macros to define bitops for task atomic flags sched: fix confusing PFA_NO_NEW_PRIVS constant 27 September 2014, 23:45:33 UTC
8369289 Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's our last set of fixes for 3.17. Most of these are for TI platforms, fixing some noisy Kconfig issues, runtime clock and power issues on several platforms and NAND timings on DRA7. There are also a couple of bug fixes for i.MX, one for QCOM and a small fix to avoid section mismatch noise on PXA. Diffstat looks large, partially due to some tables being updated and thus touching many lines. The qcom gsbi change also restructures clock management a bit and thus touches a bunch of lines. All in all, a bit more changes than we'd like at this point, but nothing stands out as risky either so it seems like the right thing to send it up now instead of holding it to the merge window" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers/soc: qcom: do not disable the iface clock in probe ARM: imx: fix .is_enabled() of shared gate clock ARM: OMAP3: Fix I/O chain clock line assertion timed out error ARM: keystone: dts: fix bindings for pcie and usb clock nodes bus: omap_l3_noc: Fix connID for OMAP4 ARM: DT: imx53: fix lvds channel 1 port ARM: dts: cm-t54: fix serial console power supply. ARM: dts: dra7-evm: Fix NAND GPMC timings ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init ARM: OMAP: Fix Kconfig warning for omap1 27 September 2014, 21:58:59 UTC
74807af Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "The final round of fixes. One corner case in the math emulator and another one in the mcount function for ftrace" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mcount: Adjust stack pointer for static trace in MIPS32 MIPS: Fix MFC1 & MFHC1 emulation for 64-bit MIPS systems 27 September 2014, 21:42:18 UTC
cd40fab Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This has: - EFI revert to fix a boot regression - early_ioremap() fix for boot failure - KASLR fix for possible boot failures - EFI fix for corrupted string printing - remove a misleading EFI bootup 'failed!' error message Unfortunately it's all rather close to the merge window" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Truncate 64-bit values when calling 32-bit OutputString() x86/efi: Delete misleading efi_printk() error message Revert "efi/x86: efistub: Move shared dependencies to <asm/efi.h>" x86/kaslr: Avoid the setup_data area when picking location x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8 27 September 2014, 21:23:13 UTC
d2fa4a8 vfs: Don't exchange "short" filenames unconditionally. Only exchange source and destination filenames if flags contain RENAME_EXCHANGE. In case if executable file was running and replaced by other file /proc/PID/exe should still show correct file name, not the old name of the file by which it was replaced. The scenario when this bug manifests itself was like this: * ALT Linux uses rpm and start-stop-daemon; * during a package upgrade rpm creates a temporary file for an executable to rename it upon successful unpacking; * start-stop-daemon is run subsequently and it obtains the (nonexistant) temporary filename via /proc/PID/exe thus failing to identify the running process. Note that "long" filenames (> DNAiME_INLINE_LEN) are still exchanged without RENAME_EXCHANGE and this behaviour exists long enough (should be fixed too apparently). So this patch is just an interim workaround that restores behavior for "short" names as it was before changes introduced by commit da1ce0670c14 ("vfs: add cross-rename"). See https://lkml.org/lkml/2014/9/7/6 for details. AV: the comments about being more careful with ->d_name.hash than with ->d_name.name are from back in 2.3.40s; they became obsolete by 2.3.60s, when we started to unhash the target instead of swapping hash chain positions followed by d_delete() as we used to do when dcache was first introduced. Acked-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: da1ce0670c14 "vfs: add cross-rename" Signed-off-by: Mikhail Efremov <sem@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 19:59:39 UTC
a28ddb8 fold swapping ->d_name.hash into switch_names() and do it along with ->d_name.len there Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 19:59:11 UTC
986c019 fold unlocking the children into dentry_unlock_parents_for_move() ... renaming it into dentry_unlock_for_move() and making it more symmetric with dentry_lock_for_move(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 03:11:15 UTC
63cf427 kill __d_materialise_dentry() it folds into __d_move() now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 03:06:14 UTC
4453641 __d_materialise_dentry(): flip the order of arguments ... thus making it much closer to (now unreachable, BTW) IS_ROOT(dentry) case in __d_move(). A bit more and it'll fold in. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 02:54:02 UTC
9d8cd30 __d_move(): fold manipulations with ->d_child/->d_subdirs list_del() + list_add() is a slightly pessimised list_move() list_del() + INIT_LIST_HEAD() is a slightly pessimised list_del_init() Interleaving those makes the resulting code even worse. And harder to follow... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 01:34:01 UTC
8527dd7 don't open-code d_rehash() in d_materialise_unique() ... and get rid of duplicate BUG_ON() there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 01:26:50 UTC
5cc3821 pull rehashing and unlocking the target dentry into __d_materialise_dentry() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 01:25:35 UTC
e4502c6 ufs: deal with nfsd/iget races Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 01:17:52 UTC
2c80929 fuse: honour max_read and max_write in direct_io mode The third argument of fuse_get_user_pages() "nbytesp" refers to the number of bytes a caller asked to pack into fuse request. This value may be lesser than capacity of fuse request or iov_iter. So fuse_get_user_pages() must ensure that *nbytesp won't grow. Now, when helper iov_iter_get_pages() performs all hard work of extracting pages from iov_iter, it can be done by passing properly calculated "maxsize" to the helper. The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need this capability, so pass LONG_MAX as the maxsize argument here. Fixes: c9c37e2e6378 ("fuse: switch to iov_iter_get_pages()") Reported-by: Werner Baumann <werner.baumann@onlinehome.de> Tested-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 01:16:51 UTC
b928095 shmem: fix nlink for rename overwrite directory If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2014, 01:16:42 UTC
5a4ee9a ip6gre: add a rtnl link alias for ip6gretap With this alias, we don't need to load manually the module before adding an ip6gretap interface with iproute2. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 September 2014, 21:15:57 UTC
effa4bc net/mlx4_core: Allow not to specify probe_vf in SRIOV IB mode When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3bb90e ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 September 2014, 20:43:23 UTC
e7af85d Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== nf pull request for net This series contains netfilter fixes for net, they are: 1) Fix lockdep splat in nft_hash when releasing sets from the rcu_callback context. We don't the mutex there anymore. 2) Remove unnecessary spinlock_bh in the destroy path of the nf_tables rbtree set type from rcu_callback context. 3) Fix another lockdep splat in rhashtable. None of the callers hold a mutex when calling rhashtable_destroy. 4) Fix duplicated error reporting from nfnetlink when aborting and replaying a batch. 5) Fix a Kconfig issue reported by kbuild robot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 26 September 2014, 20:21:29 UTC
445f7f4 r8152: fix the carrier off when autoresuming netif_carrier_off would be called when autoresuming, even though the cable is plugged. This causes some applications do relative actions when detecting the carrier off. Keep the status of the carrier, and let it be modified when the linking change occurs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 September 2014, 20:13:17 UTC
back to top