https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
6887a41 Linux 3.5-rc5 30 June 2012, 23:08:57 UTC
c07978b Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL 30 June 2012, 23:01:50 UTC
4f0f4af printk.c: fix kernel-doc warnings Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 June 2012, 22:56:40 UTC
87fac28 linux/irq.h: fix kernel-doc warning Fix kernel-doc warning. This struct member was removed in commit 875682648b89 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 June 2012, 22:56:40 UTC
5d5474d Merge branch 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL 30 June 2012, 22:27:52 UTC
5ae95ae ARM: imx6q: fix suspend regression caused by common clk migration When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 30 June 2012, 22:25:17 UTC
e5a5192 Merge tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n 30 June 2012, 22:21:00 UTC
c767609 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix 30 June 2012, 18:11:58 UTC
21f2729 Merge tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues 30 June 2012, 17:11:24 UTC
6eca954 Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes 30 June 2012, 04:53:50 UTC
5f16012 acpi_pad: fix power_saving thread deadlock The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 June 2012, 04:51:13 UTC
b037384 ACPI video: Still use ACPI backlight control if _DOS doesn't exist This fixes a regression in 3.4-rc1 caused by commit ea9f8856bd6d4ed45885b06a338f7362cd6c60e5 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 June 2012, 04:43:42 UTC
02529ba Merge tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort 30 June 2012, 02:05:41 UTC
d362082 printk: Optimize if statement logic where newline exists In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 29 June 2012, 20:55:35 UTC
15114c7 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs 29 June 2012, 20:50:11 UTC
15b7743 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery 29 June 2012, 17:29:54 UTC
62a75b9 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array 29 June 2012, 17:29:21 UTC
efc9def Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable 29 June 2012, 17:24:56 UTC
084681d printk: flush continuation lines immediately to console Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 29 June 2012, 15:39:42 UTC
bc6dc75 powerpc/pseries: Fix software invalidate TCE The following added support for powernv but broke pseries/BML: 1f1616e powerpc/powernv: Add TCE SW invalidation support TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in the pseries code were not updated to reflect this. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@kernel.org [v3.3+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:37 UTC
0b17ba7 powerpc: check_and_cede_processor() never cedes Commit f948501b36c6 ("Make hard_irq_disable() actually hard-disable interrupts") caused check_and_cede_processor to stop working. ->irq_happened will never be zero right after a hard_irq_disable so the compiler removes the call to cede_processor completely. The bug was introduced back in the lazy interrupt handling rework of 3.4 but was hidden until recently because hard_irq_disable did nothing. This issue will eventually appear in 3.4 stable since the hard_irq_disable fix is marked stable, so mark this one for stable too. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:37 UTC
2d773aa powerpc/ftrace: Do not trace restore_interrupts() As I was adding code that affects all archs, I started testing function tracer against PPC64 and found that it currently locks up with 3.4 kernel. I figured it was due to tracing a function that shouldn't be, so I went through the following process to bisect to find the culprit: cat /debug/tracing/available_filter_functions > t num=`wc -l t` sed -ne "1,${num}p" t > t1 let num=num+1 sed -ne "${num},$p" t > t2 cat t1 > /debug/tracing/set_ftrace_filter echo function /debug/tracing/current_tracer <failed? bisect t1, if not bisect t2> It finally came down to this function: restore_interrupts() I'm not sure why this locks up the system. It just seems to prevent scheduling from occurring. Interrupts seem to still work, as I can ping the box. But all user processes freeze. When restore_interrupts() is not traced, function tracing works fine. Cc: stable@kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:36 UTC
2cb387a powerpc: Fix Section mismatch warnings in prom_init.c This patches tries to fix a couple of Section mismatch warnings like following one: WARNING: arch/powerpc/kernel/built-in.o(.text+0x2923c): Section mismatch in reference from the function .prom_query_opal() to the function .init.text:.call_prom() The function .prom_query_opal() references the function __init .call_prom(). This is often because .prom_query_opal lacks a __init annotation or the annotation of .call_prom is wrong. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:36 UTC
c58ce2b ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt In entry_64.S version of ret_from_except_lite, you'll notice that in the !preempt case, after we've checked MSR_PR we test for any TIF flag in _TIF_USER_WORK_MASK to decide whether to go to do_work or not. However, in the preempt case, we do a convoluted trick to test SIGPENDING only if PR was set and always test NEED_RESCHED ... but we forget to test any other bit of _TIF_USER_WORK_MASK !!! So that means that with preempt, we completely fail to test for things like single step, syscall tracing, etc... This should be fixed as the following path: - Test PR. If not set, go to resume_kernel, else continue. - If go resume_kernel, to do that original do_work. - If else, then always test for _TIF_USER_WORK_MASK to decide to do that original user_work, else restore directly. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:35 UTC
82b2521 powerpc: Fix uninitialised error in numa.c chroma_defconfig currently gives me this with gcc 4.6: arch/powerpc/mm/numa.c:638:13: error: 'dm' may be used uninitialized in this function [-Werror=uninitialized] It's a bogus warning/error since of_get_drconf_memory() only writes it anyway. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: <stable@kernel.org> [v3.3+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:35 UTC
7784655 powerpc: Fix BPF_JIT code to link with multiple TOCs If the kernel is big enough (eg. allyesconfig), the linker may need to switch TOCs when calling from the BPF JIT code out to the external helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()). In order to do that we need to leave space after the bl for the linker to insert a reload of our TOC pointer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 29 June 2012, 04:35:34 UTC
9acc7bd Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon changes from Guenter Roeck: "Just e-mail address updates" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Update my e-mail address hwmon: (applesmc) correct email address for Jesper Juhl 28 June 2012, 19:38:51 UTC
ccce27c Merge git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - the WDIOC_GETSTATUS return value - the unregister of all NMI events on exit - the loading of the iTCO_wdt driver after the conversion to the lpc_ich mfd model." * git://www.linux-watchdog.org/linux-watchdog: watchdog: core: fix WDIOC_GETSTATUS return value watchdog: hpwdt: Unregister NMI events on exit. watchdog: iTCO_wdt: add platform driver module alias 28 June 2012, 18:51:19 UTC
221d3eb Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes from Jan Kara: "Make UDF more robust in presence of corrupted filesystem" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fortify loading of sparing table udf: Avoid run away loop when partition table length is corrupted udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol() 28 June 2012, 18:43:45 UTC
9a7c6b7 Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs Pull ubi/ubifs fixes from Artem Bityutskiy: "Fix the debugfs regression - we never enable it because incorrect 'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)', but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion." * tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs: UBI: correct usage of IS_ENABLED() UBIFS: correct usage of IS_ENABLED() UBIFS: fix assertion 28 June 2012, 18:41:43 UTC
8b9468d watchdog: core: fix WDIOC_GETSTATUS return value In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 28 June 2012, 18:40:56 UTC
a089361 watchdog: hpwdt: Unregister NMI events on exit. This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 28 June 2012, 18:40:31 UTC
e5de32e watchdog: iTCO_wdt: add platform driver module alias The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 28 June 2012, 18:40:10 UTC
4a9c469 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nearly all intel, one missing license header in nouveau, nothing majorly earth shattering." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: allow PCH PWM override on IVB" drm/nouveau: add license header to prime. drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN 28 June 2012, 18:26:42 UTC
ef72622 Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh: kfr2r09: fix compile breakage 28 June 2012, 18:22:25 UTC
f3747e2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking update from David Miller: 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg. 2) Add device IDs for AR3011 and AR3012 bluetooth chips. From Giancarlo Formicuccia and Marek Vasut. 3) Fix wireless regulatory deadlock, from Eliad Peller. 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet. 5) Revert the two commits that added skb_orphan_try(), it causes erratic bonding behavior with UDP clients and the gains it used to give are mostly no longer happening due to how BQL works. From Eric Dumazet. 6) It took two tries, but Thomas Graf fixed a problem wherein we registered ipv6 routing procfs files before their backend data were initialized properly. 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi. 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from Jason Wang. 9) Fix use of stale SKB data pointer after skb_linearize() call in batman-adv, from Antonio Quartulli. 10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander Duyck. 11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn Mork. 12) Fix suspend/resume and open failure handling in usbnet from Ming Lei. 13) Attempt to fix device r8169 hangs for certain chips, from Francois Romieu. 14) Fix advancement of RX dirty pointer in some situations in sh_eth driver, from Yoshihiro Shimoda. 15) Attempt to fix restart of IPV6 routing table dumps when there is an intervening table update. From Eric Dumazet. 16) Respect security_inet_conn_request() return value in ipv6 TCP. From Neal Cardwell. 17) Add another iPAD device ID to ipheth driver, from Davide Gerhard. 18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep splats, from Eric Dumazet. 19) Make sure all bridge devices, regardless of whether they were created via netlink or ioctls, have their rtnetlink ops hooked up. From Thomas Graf and Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) 9p: fix min_t() casting in p9pdu_vwritef() can: flexcan: use be32_to_cpup to handle the value of dt entry xen/netfront: teardown the device before unregistering it. bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) vhost: use USER_DS in vhost_worker thread ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP net: l2tp_eth: use LLTX to avoid LOCKDEP splats mac802154: add missed braces net: l2tp_eth: fix l2tp_eth_dev_xmit race net/mlx4_en: Release QP range in free_resources net/mlx4: Use single completion vector after NOP failure net/mlx4_en: Set correct port parameters during device initialization ipheth: add support for iPad caif-hsi: Add missing return in error path caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost caif: Clear shutdown mask to zero at reconnect. tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request() ipv6: fib: fix fib dump restart batman-adv: fix race condition in TT full-table replacement batman-adv: only drop packets of known wifi clients ... 28 June 2012, 18:20:31 UTC
1df2ae3 udf: Fortify loading of sparing table Add sanity checks when loading sparing table from disk to avoid accessing unallocated memory or writing to it. Signed-off-by: Jan Kara <jack@suse.cz> 28 June 2012, 17:31:09 UTC
adee11b udf: Avoid run away loop when partition table length is corrupted Check provided length of partition table so that (possibly maliciously) corrupted partition table cannot cause accessing data beyond current buffer. Signed-off-by: Jan Kara <jack@suse.cz> 28 June 2012, 17:30:58 UTC
cb14d34 udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol() Signed-off-by: Jan Kara <jack@suse.cz> 28 June 2012, 17:30:40 UTC
e9bcd47 Merge branches 'sh/urgent' and 'sh/trivial' into sh-fixes-for-linus 28 June 2012, 07:46:13 UTC
ad3337c sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 28 June 2012, 07:45:34 UTC
bc404e9 sh: kfr2r09: fix compile breakage Fix compile breakage caused by commit aa82f9fcd0062782dcbe29a2c820ba7c04dbe572 Author: Paul Mundt <lethal@linux-sh.org> sh: kfr2r09 evt2irq migration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 28 June 2012, 07:35:40 UTC
a969dd1 Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== here's a patch intended for v3.5, targeting net/master. Hui Wang has found and fixed an endianness problem in the device tree handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 June 2012, 22:27:24 UTC
d31bb4f 9p: fix min_t() casting in p9pdu_vwritef() I don't think we're actually likely to hit this limit but if we do then the comparison should be done as size_t. The original code is equivalent to: len = strlen(sptr) % USHRT_MAX; Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 June 2012, 22:26:24 UTC
47b514c Merge tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are some small USB gadget bugfixes, and a few new USB device ids added to some drivers for the 3.5-rc5 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: CP210x Add 10 Device IDs USB: option: Add USB ID for Novatel Ovation MC551 usb: phy: Fix Kconfig dependency for Phy drivers usb-storage: revert commit afff07e61a52 (Add 090c:1000 to unusal-devs) SCSI & usb-storage: add try_rc_10_first flag usb: musb: host: release dma channels if no active io usb: gadget: lpc32xx_udc: fix build error with debugfs enabled usb: otg: twl6030-usb: Fix twl writes USB: option: add id for Cellient MEN-200 usb: dwc3: fix giveback of queued request in ep_dequeue usb: gadget: Complete fsl qe/udc driver conversion 27 June 2012, 19:54:05 UTC
2b25679 Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here you find quite a few changes for HD-audio and a copule of quirk additions for USB-audio. All reasonably small and/or trivial." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix power-map regression for HP dv6 & co ALSA: hda - Initialize caches at codec reconfiguration ALSA: hda - Fix memory leaks at module unload ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers ALSA: hda - Add Realtek ALC280 codec support ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS ASoC: wm8994: remove duplicate code ALSA: usb-audio: add BOSS GT-100 support ALSA: HDA: Add inverted internal mic quirk for Lenovo S205 ALSA: hda - Fix ALC272X codec detection ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500 27 June 2012, 19:50:28 UTC
6ebfbe9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull a m68knommu fix from Greg Ungerer: "It contains a single fix for breakage using the Freescale FEC eth driver on ColdFire CPUs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: define a local devm_clk_get() function 27 June 2012, 19:48:39 UTC
843760c Merge tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - omap_hsmmc: Using AUTO_CMD12 (enabled by default in 3.5-rc1) has been found to cause data corruption on the BeagleBoard, but no other OMAP boards so far. Revert the patch until there's a root cause explanation that makes sense, at which point we might decide to use a blacklist or whitelist. - mmc_block: Fix incorrect data timeouts for the case of multiblock (ACMD22) writes for block-addressed cards. * tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: Revert "mmc: omap_hsmmc: Enable Auto CMD12" mmc: block: fix the data timeout issue with ACMD22 27 June 2012, 19:48:07 UTC
e04fb02 Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux Pull clk common framework fixes from Mike Turquette: "This contains three NULL pointer fixes and two device regression fixups. Two NULL pointer dereferences were in the common clk core due to lack of sanity checking and the third NPD was in the mxs-specific clock code due to incorrect use of __initdata. The device regressions were the result of improper data: a wrong string name for matching DT data broke the SPEAr ethernet controller and another string matching problem in the mxs clock data resulted in a broken MMC controller." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: mxs: fix clock lookup after freeing init memory clk: mxs: fix ref_io clock definition clk: Check parent for NULL in clk_change_rate clk: Allow late cache allocation for clk->parents clk: SPEAr600: Fix ethernet clock name for DT based probing 27 June 2012, 19:44:58 UTC
6b44695 chmod +x scripts/gfp-translate This script lacks an executable bit. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 June 2012, 19:44:29 UTC
2266b05 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Two tiny patches and one revert: - Kill a bogus error message introduced in 3.4, further Bspec reading indicates that this is how the hw is supposed to work. - Reorder one backlight register restore, fixing broken backlight on some machines after resume. - Revert a hack from Jesse for ivb backlight control - it breaks the backlight controls on my shiny new ivb laptop." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: allow PCH PWM override on IVB" drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN 27 June 2012, 18:56:20 UTC
7aa1e7f Revert "drm/i915: allow PCH PWM override on IVB" This reverts commit f82cfb6bcda164ef3a66b8c3fc549b1f9bdd09ad. This breaks the backlight controls on my IVB asus zenbook with an eDP panel. I guess the right fix would be to read this bit and use either the pch or the cpu register to frob the backlight values. But that is stuff for -next. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 27 June 2012, 18:26:30 UTC
75cc523 PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. Commit e978aa7d7d57d04eb5f88a7507c4fb98577def77 ( cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state) was breaking suspend on laptops, as reported in the below link - https://lkml.org/lkml/2011/11/11/164 This was fixed in commit 3439a8da16bcad6b0982ece938c9f8299bb53584 (ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) by removing acpi_idle_suspend flag. - https://lkml.org/lkml/2011/11/14/74 But this did fix did not work on all systems as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave. - https://lkml.org/lkml/2012/5/27/115 It looked like with commit e978aa7d broke suspend and with commit 3439a8da resume was not working with acpi_idle driver. This patch fixes the regression that caused this issue in the first place. acpi_idle_suspend flag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commit b04e7bdb984 ) So reverting the commit 3439a8da is essential. By default, irqs are disabled in cpu_idle arch specific call and re-enabled in idle state return path . During suspend, the acpi_idle_suspend flag is set, which prevents the cpus from going to deeper idle states, it is essential to enabling the irqs in this return path too. To address the suspend issue, we were not re-enabling the interrupts while returning from acpi_idle_enter_bm() routine if acpi_idle_suspend flag is set. and this caused suspend failure. In addition to the above, to improve the readability of the code, return of -ENIVAL is replaced with -EBUSY in acpi_idle_suspend return path. Implying that the system is currently busy when suspend is in progress, which prevents the cpus from entering deeper C-states. Reported-and-Tested-by: Dav Hansen <dave@linux.vnet.ibm.com> Tested-by: Preeti Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Reviewed-by: Srivatsa S Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 27 June 2012, 18:18:53 UTC
e90b833 ARM: OMAP4470: Fix OMAP4470 boot failure OMAP4470 currently fails to boot, printing various messages such as ... omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck omap_hwmod: mpu: cannot _init_clocks ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4() omap_hwmod: mpu: couldn't init clocks Modules linked in: [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64) [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4) [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c) [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30) [<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304) [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044) ---[ end trace 1b75b31a2719ed1c ]--- The problem is that currently none of the clocks are being registered for OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics. This fix allows the kernel to boot without failure using a simple RAMDISK file system on OMAP4470 blaze board. Per feedback from Paul and Benoit the 4470 clock data is incomplete for new modules such as the 2D graphics block that has been added to the 4470. Therefore add a warning to indicate that the clock data is incomplete. Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com> 27 June 2012, 15:09:59 UTC
903e0e4 UBI: correct usage of IS_ENABLED() Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> 27 June 2012, 11:22:15 UTC
2d4cf5a UBIFS: correct usage of IS_ENABLED() Commit "818039c UBIFS: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> 27 June 2012, 11:22:15 UTC
85f2f83 can: flexcan: use be32_to_cpup to handle the value of dt entry The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: stable <stable@vger.kernel.org> # v3.2+ Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 27 June 2012, 09:12:07 UTC
e9bf5f3 drm/nouveau: add license header to prime. Just forgot this when I posted it, and yes I'm the only person to have changed the file since. Signed-off-by: Dave Airlie <airlied@redhat.com> 27 June 2012, 08:27:35 UTC
6bc96d0 xen/netfront: teardown the device before unregistering it. Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190 Reported-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: William Dauchy <wdauchy@gmail.com> Cc: stable@kernel.org Cc: 675190@bugs.debian.org Signed-off-by: David S. Miller <davem@davemloft.net> 27 June 2012, 08:25:41 UTC
149ddd8 bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 June 2012, 04:12:32 UTC
d7ffde3 vhost: use USER_DS in vhost_worker thread On some architectures address spaces are set up in a way that this is not necessary to work properly but on some others (like s390) it is. Make sure we operate on the user address space to allow copy_xxx_user() from the vhost_worker() thread by setting it explicitly before calling use_mm() and revert it after unuse_mm(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 June 2012, 04:10:56 UTC
58c553d ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry Commit 20ef9e08 ("ARM: EXYNOS: Support DMA for EXYNOS5250 SoC") renamed EXYNOS4_DEV_DMA to EXYNOS_DEV_DMA. But some machine entries still had EXYNOS4_DEV_DMA. Changed them to EXYNOS_DEV_DMA. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 27 June 2012, 01:03:00 UTC
57efd44 ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <stable@vger.kernel.org> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 June 2012, 23:44:34 UTC
a2842a1 net: l2tp_eth: use LLTX to avoid LOCKDEP splats Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code. [ 8683.927442] ====================================================== [ 8683.927555] [ INFO: possible circular locking dependency detected ] [ 8683.927672] 3.4.1-build-0061 #14 Not tainted [ 8683.927782] ------------------------------------------------------- [ 8683.927895] swapper/0/0 is trying to acquire lock: [ 8683.928007] (slock-AF_INET){+.-...}, at: [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [ 8683.928121] but task is already holding lock: [ 8683.928121] (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] which lock already depends on the new lock. [ 8683.928121] [ 8683.928121] [ 8683.928121] the existing dependency chain (in reverse order) is: [ 8683.928121] [ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}: [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<c0304e0c>] ip_send_reply+0xf2/0x1ce [ 8683.928121] [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f [ 8683.928121] [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194 [ 8683.928121] [<c031929b>] tcp_v4_rcv+0x387/0x5a0 [ 8683.928121] [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9 [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c030075b>] ip_local_deliver+0x41/0x45 [ 8683.928121] [<c03005dd>] ip_rcv_finish+0x31a/0x33c [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c0300960>] ip_rcv+0x201/0x23d [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02deae8>] netif_receive_skb+0x4e/0x7d [ 8683.928121] [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too] [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] -> #0 (slock-AF_INET){+.-...}: [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] other info that might help us debug this: [ 8683.928121] [ 8683.928121] Possible unsafe locking scenario: [ 8683.928121] [ 8683.928121] CPU0 CPU1 [ 8683.928121] ---- ---- [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] [ 8683.928121] *** DEADLOCK *** [ 8683.928121] [ 8683.928121] 3 locks held by swapper/0/0: [ 8683.928121] #0: (rcu_read_lock){.+.+..}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #1: (rcu_read_lock_bh){.+....}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #2: (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] stack backtrace: [ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14 [ 8683.928121] Call Trace: [ 8683.928121] [<c034bdd2>] ? printk+0x18/0x1a [ 8683.928121] [<c0158904>] print_circular_bug+0x1ac/0x1b6 [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [<c012b23a>] ? local_bh_enable+0xd/0xd [ 8683.928121] <IRQ> [<c012b4d0>] ? irq_exit+0x41/0x91 [ 8683.928121] [<c0103c6f>] ? do_IRQ+0x79/0x8d [ 8683.928121] [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86 [ 8683.928121] [<c034ef6e>] ? common_interrupt+0x2e/0x34 [ 8683.928121] [<c0108a33>] ? default_idle+0x23/0x38 [ 8683.928121] [<c01091a8>] ? cpu_idle+0x55/0x6f [ 8683.928121] [<c033df25>] ? rest_init+0xa1/0xa7 [ 8683.928121] [<c033de84>] ? __read_lock_failed+0x14/0x14 [ 8683.928121] [<c0498745>] ? start_kernel+0x303/0x30a [ 8683.928121] [<c0498209>] ? repair_env_string+0x51/0x51 [ 8683.928121] [<c04980a8>] ? i386_start_kernel+0xa8/0xaf It appears that like most virtual devices, l2tp should be converted to LLTX mode. This patch takes care of statistics using atomic_long in both RX and TX paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data before a pskb_may_pull() call. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Cc: James Chapman <jchapman@katalix.com> Cc: Hong zhi guo <honkiko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 June 2012, 23:42:33 UTC
3fcc8f9 USB: CP210x Add 10 Device IDs This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 June 2012, 23:14:34 UTC
065b07e USB: option: Add USB ID for Novatel Ovation MC551 This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 June 2012, 23:14:34 UTC
c615632 usb: phy: Fix Kconfig dependency for Phy drivers USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 June 2012, 23:14:33 UTC
fe85227 Revert "mmc: omap_hsmmc: Enable Auto CMD12" This patch reverts the commit dba3c29ea4a1d5d544. After bisecting, this commit dba3c29 is found to ruin micro-SD card data (writing incorrect file, or fs is corrupt after several times mount) on the beagle-xm revB, and reverting the commit will fix the problem. Also from TRM of OMAP3/OMAP4/DM37x, the below is mentioned about the Auto CMD12 Enable bit. - SDIO does not support this feature. - SD card only. Looks it is not suitable to always enable Auto CMD12 in host controller driver. Considered that the commit is not mature enough, so ask to revert it first. Cc: Balaji T K <balajitk@ti.com> Cc: Venkatraman S <svenkatr@ti.com> Buglink: https://lkml.org/lkml/2012/6/10/225 Reported-by: Paolo Pisati <p.pisati@gmail.com> Reported-bisected-and-tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> 26 June 2012, 20:10:30 UTC
d380443 mmc: block: fix the data timeout issue with ACMD22 If multi block write operation fails for SD card, during error handling we send the SD_APP_SEND_NUM_WR_BLKS (ACMD22) to know how many blocks were already programmed by card. But mmc_sd_num_wr_blocks() function which sends the ACMD22 calculates the data timeout value from csd.tacc_ns and csd.tacc_clks parameters which will be 0 for block addressed (>2GB cards) SD card. This would result in timeout_ns and timeout_clks being 0 in the mmc_request passed to host driver. This means host controller would program its data timeout timer value with 0 which could result in DATA TIMEOUT errors from controller. To fix this issue, mmc_sd_num_wr_blocks() should instead just call the mmc_set_data_timeout() to calculate the data timeout value. mmc_set_data_timeout() function ensures that non zero timeout value is set even for block addressed SD cards. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> 26 June 2012, 20:10:29 UTC
116e90b syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ The recent changes to the printk buffer management resulted in SYSLOG_ACTION_READ to only return a single message, whereas previously the buffer would get filled as much as possible. As, when too small to fit everything, filling it to the last byte would be pretty ugly with the new code, the patch arranges for as many messages as possible to get returned in a single invocation. User space tools in at least all SLES versions depend on the old behavior. This at once addresses the issue attempted to get fixed with commit b56a39ac263e5b8cafedd551a49c2105e68b98c2 ("printk: return -EINVAL if the message len is bigger than the buf size"), and since that commit widened the possibility for losing a message altogether, the patch here assumes that this other commit would get reverted first (otherwise the patch here won't apply). Furthermore, this patch also addresses the problem dealt with in commit 4a77a5a06ec66ed05199b301e7c25f42f979afdc ("printk: use mutex lock to stop syslog_seq from going wild"), so I'd recommend reverting that one too (albeit there's no direct collision between the two). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Kay Sievers <kay@vrfy.org> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 June 2012, 19:37:36 UTC
6fda135 Revert "printk: return -EINVAL if the message len is bigger than the buf size" This reverts commit b56a39ac263e5b8cafedd551a49c2105e68b98c2. A better patch from Jan will follow this to resolve the issue. Acked-by: Kay Sievers <kay@vrfy.org> Cc: Fengguang Wu <wfg@linux.intel.com> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 June 2012, 19:35:24 UTC
d1346a6 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just two changes: one udl endian fix, one nouveau memory corruption on some GPUs." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/fbcon: using nv_two_heads is not a good idea drm/udl: Make sure to get correct endian keys from vendor descriptor 26 June 2012, 18:26:50 UTC
60d2c25 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "The most important one is a purification of Kconfig for CONFIG_HID; the inclusion of HID groups and autoloading didn't leave the Kconfig in a really consistent state. Henrik's patch fixes that. In addition to that, there are two small fixes for logitech and magicmouse drivers." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Fix the generic Kconfig options HID: magicmouse: Correct report range of major / minor axes HID: logitech: don't use stack based dj_report structures 26 June 2012, 18:23:41 UTC
6e1c39c ALSA: hda - Fix power-map regression for HP dv6 & co The recent fix for power-map controls (commit b0791dda813) caused regressions on some other HP laptops. They have fixed pins but these pins are exposed as jack-detectable. Thus the driver tries to control the power-map dynamically per jack detection where it never gets on. This patch adds the check of connection and it assumes the no jack detection is available for fixed pins no matter what pin capability says. BugLink: http://bugs.launchpad.net/bugs/1013183 Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 26 June 2012, 15:43:06 UTC
1b6b7c9 x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl There was a stray %s left from testing, remove it. Add -w to the #! line (which is parsed by Perl even if the Perl interpreter is invoked explicitly on the command line) to catch these kinds of errors in the future. Reported-by: Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/20120626143246.0c9bf301@endymion.delvare Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 26 June 2012, 15:02:48 UTC
09a6071 ALSA: hda - Initialize caches at codec reconfiguration Better to clean up the caches for avoiding inconsistent codec state after the reconfiguration. Signed-off-by: Takashi Iwai <tiwai@suse.de> 26 June 2012, 13:01:33 UTC
59cad16 ALSA: hda - Fix memory leaks at module unload Some caches aren't released properly at module unloading time. Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de> 26 June 2012, 13:00:20 UTC
ee48df5 ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers When moved to the helper code, forgot to release the verb arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de> 26 June 2012, 12:56:20 UTC
9bd0c15 drm/nouveau/fbcon: using nv_two_heads is not a good idea nv_two_heads() was never meant to be used outside of pre-nv50 code. The code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific chipsets to 1 CRTC based on (pci_device & 0x0ff0). The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing memory corruption because there's actually 2 CRTCs.. This switches fbcon to use the CRTC count directly from the mode_config structure, which will also fix the same issue on Kepler boards which have 4 CRTCs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 26 June 2012, 11:16:43 UTC
bb44c30 ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n commit 8259573b (ARM: OMAP2+: nand: Make board_onenand_init() visible to board code) broke the build for configs with OneNAND disabled. By removing the static in the header file, it created a duplicate definition in the .c and the .h files, resuling in a build error: /work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.c:102:111: error: redefinition of 'board_onenand_init' /work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.h:56:51: note: previous definition of 'board_onenand_init' was here make[2]: *** [arch/arm/mach-omap2/board-flash.o] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [arch/arm/mach-omap2] Error 2 make: *** [sub-make] Error 2 Fix this by removing the duplicate dummy entry from the C file. Cc: Enric Balletbò i Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 26 June 2012, 10:29:57 UTC
d03ac61 clk: mxs: fix clock lookup after freeing init memory The struct clk_lookup are marked as __initdata, resulting in being removed from memory after the kernel finished booting. However this leads to a NULL pointer de-ref if loading a module which uses clk_get. This patch removes the __initdata from the struct clk_lookup. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> 25 June 2012, 23:51:48 UTC
d6dc55c clk: mxs: fix ref_io clock definition The definition of clocks ref_io0 and ref_io1 were inverted. It causes a mmc regression on some boards right away. Fix the regression by correcting the ref_io clock definition. Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> 25 June 2012, 23:51:48 UTC
bf47b4f clk: Check parent for NULL in clk_change_rate clk_change_rate() is accessing parent's rate without checking if the parent exists at all. In case of root clocks this will cause NULL pointer dereference. This patch follows what clk_calc_new_rates() does in such situation. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@kernel.org 25 June 2012, 23:51:48 UTC
7975059 clk: Allow late cache allocation for clk->parents Parent clocks for muxes are cached in clk->parents to avoid frequent lookups, however the cache allocation happens only during clock registeration and later clk_set_parent() assumes a cache space available and allocated. This is not entirely true for platforms which do early clock registerations wherein the cache allocation using kzalloc could fail during clock registeration. Allow cache allocation to happen later as part of clk_set_parent() to help such cases and avoid crashes assuming a cache being available. While here also replace existing kmalloc() with kzalloc() in the file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@kernel.org 25 June 2012, 23:51:47 UTC
3a35fc3 clk: SPEAr600: Fix ethernet clock name for DT based probing Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> 25 June 2012, 23:51:47 UTC
8a8e28b mac802154: add missed braces Add missed braces after 'if' operator. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:35:30 UTC
aa214de net: l2tp_eth: fix l2tp_eth_dev_xmit race Its illegal to dereference skb after giving it to l2tp_xmit_skb() as it might be already freed/reused. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:30:54 UTC
044ca2a net/mlx4_en: Release QP range in free_resources Add a missing resource release in ring cleanup. Not doing this leaves a range of QPs that are being reserved, and no one can use them. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:30:12 UTC
9858d2d net/mlx4: Use single completion vector after NOP failure Fix a crash at the error flow of NOP command which caused the driver to try and use a completion vector which wasn't allocated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:30:12 UTC
5c8e904 net/mlx4_en: Set correct port parameters during device initialization Set valid port parameters: MTU and flow control configuration when configuring the port during HW device initialization, prior to the net device open() being called. Using invalid parameters (such as all zeros) could lead to bad firmware behavior. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:30:12 UTC
6de0298 ipheth: add support for iPad This adds support for the iPad to the ipheth driver. (product id = 0x129a) Signed-off-by: Davide Gerhard <rainbow@irh.it> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:20:41 UTC
1fdc763 caif-hsi: Add missing return in error path Fix a missing return, causing access to freed memory. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:07:23 UTC
3935600 caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost When receiving a piggyback'ed descriptor containing an embedded frame, but no payload, the embedded frame was lost. Signed-off-by: Per Ellefsen <per.ellefsen@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:07:22 UTC
eaa8c5f caif: Clear shutdown mask to zero at reconnect. Clear caif sockets's shutdown mask at (re)connect. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:07:22 UTC
437c5b5 tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request() If security_inet_conn_request() returns non-zero then TCP/IPv6 should drop the request, just as in TCP/IPv4 and DCCP in both IPv4 and IPv6. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 23:05:19 UTC
fa809e2 ipv6: fib: fix fib dump restart Commit 2bec5a369ee79576a3 (ipv6: fib: fix crash when changing large fib while dumping it) introduced ability to restart the dump at tree root, but failed to skip correctly a count of already dumped entries. Code didn't match Patrick intent. We must skip exactly the number of already dumped entries. Note that like other /proc/net files or netlink producers, we could still dump some duplicates entries. Reported-by: Debabrata Banerjee <dbavatar@gmail.com> Reported-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 June 2012, 22:37:19 UTC
aace99e Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. Trivial conflict due to new USB HID ID's being added next to each other (Baanto vs Axentia). * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits) [media] smia: Fix compile failures [media] Fix VIDIOC_DQEVENT docbook entry [media] s5p-fimc: Fix control creation function [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file [media] s5p-mfc: Fix setting controls [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT [media] v4l/s5p-mfc: corrected encoder v4l control definitions [media] v4l: mem2mem_testdev: Fix race conditions in driver [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism [media] cxd2820r: Fix an incorrect modulation type bitmask [media] em28xx: Show a warning if the board does not support remote controls [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD [media] USB: Staging: media: lirc: initialize spinlocks before usage [media] Revert "[media] media: mx2_camera: Fix mbus format handling" [media] bw-qcam: driver and pixfmt documentation fixes [media] cx88: fix firmware load on big-endian systems [media] cx18: support big-endian systems [media] ivtv: fix support for big-endian systems [media] tuner-core: return the frequency range of the correct tuner [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls() ... 25 June 2012, 21:53:09 UTC
b41772a rcu: Stop rcu_do_batch() from multiplexing the "count" variable Commit b1420f1c (Make rcu_barrier() less disruptive) rearranged the code in rcu_do_batch(), moving the ->qlen manipulation to follow the requeueing of the callbacks. Unfortunately, this rearrangement clobbered the value of the "count" local variable before the value of rdp->qlen was adjusted, resulting in the value of rdp->qlen being inaccurate. This commit therefore introduces an index variable "i", avoiding the inadvertent multiplexing. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> 25 June 2012, 19:35:25 UTC
befae82 ALSA: hda - Add Realtek ALC280 codec support This chip looks very similar to ALC269 and ALC27* variants. The bug reporter has verified that sound was working after this patch had been applied. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1017017 Tested-by: Richard Crossley <richardcrossley@o2.co.uk> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 25 June 2012, 19:24:41 UTC
4661e35 printk: fix regression in SYSLOG_ACTION_CLEAR Commit 7ff9554bb578ba02166071d2d487b7fc7d860d62 (printk: convert byte-buffer to variable-length record buffer) introduced a regression by accidentally removing a "break" statement from inside the big switch in printk's do_syslog(). The symptom of this bug is that the "dmesg -C" command doesn't only clear the kernel's log buffer; it also disables console logging. This patch (as1561) fixes the regression by adding the missing "break". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 25 June 2012, 19:11:58 UTC
back to top