Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
a0d271c Linus Torvalds 30 September 2012, 23:47:46 UTC Linux 3.6 30 September 2012, 23:47:46 UTC
8110e16 Miklos Szeredi 17 September 2012, 20:23:30 UTC vfs: dcache: fix deadlock in tree traversal IBM reported a deadlock in select_parent(). This was found to be caused by taking rename_lock when already locked when restarting the tree traversal. There are two cases when the traversal needs to be restarted: 1) concurrent d_move(); this can only happen when not already locked, since taking rename_lock protects against concurrent d_move(). 2) racing with final d_put() on child just at the moment of ascending to parent; rename_lock doesn't protect against this rare race, so it can happen when already locked. Because of case 2, we need to be able to handle restarting the traversal when rename_lock is already held. This patch fixes all three callers of try_to_ascend(). IBM reported that the deadlock is gone with this patch. [ I rewrote the patch to be smaller and just do the "goto again" if the lock was already held, but credit goes to Miklos for the real work. - Linus ] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2012, 00:41:40 UTC
6a3e3db Linus Torvalds 29 September 2012, 17:37:04 UTC Merge tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two small patches: * One patch to fix the function declarations for !CONFIG_IOMMU_API. This is causing build errors in linux-next and should be fixed for v3.6. * Another patch to fix an IOMMU group related NULL pointer dereference." * tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix wrong assumption in iommu-group specific code iommu: static inline iommu group stub functions 29 September 2012, 17:37:04 UTC
21e9893 Linus Torvalds 29 September 2012, 17:31:52 UTC Merge git://git.infradead.org/users/willy/linux-nvme Pull NVMe driver fixes from Matthew Wilcox: "Now that actual hardware has been released (don't have any yet myself), people are starting to want some of these fixes merged." Willy doesn't have hardware? Guys... * git://git.infradead.org/users/willy/linux-nvme: NVMe: Cancel outstanding IOs on queue deletion NVMe: Free admin queue memory on initialisation failure NVMe: Use ida for nvme device instance NVMe: Fix whitespace damage in nvme_init NVMe: handle allocation failure in nvme_map_user_pages() NVMe: Fix uninitialized iod compiler warning NVMe: Do not set IO queue depth beyond device max NVMe: Set block queue max sectors NVMe: use namespace id for nvme_get_features NVMe: replace nvme_ns with nvme_dev for user admin NVMe: Fix nvme module init when nvme_major is set NVMe: Set request queue logical block size 29 September 2012, 17:31:52 UTC
9c603e5 Linus Torvalds 08 September 2012, 19:57:30 UTC mtdchar: fix offset overflow detection Sasha Levin has been running trinity in a KVM tools guest, and was able to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of the memory type). The call trace showed that it was mtdchar_mmap() that created an invalid remap_pfn_range(). The problem is that mtdchar_mmap() does various really odd and subtle things with the vma page offset etc, and uses the wrong types (and the wrong overflow) detection for it. For example, the page offset may well be 32-bit on a 32-bit architecture, but after shifting it up by PAGE_SHIFT, we need to use a potentially 64-bit resource_size_t to correctly hold the full value. Also, we need to check that the vma length plus offset doesn't overflow before we check that it is smaller than the length of the mtdmap region. This fixes things up and tries to make the code a bit easier to read. Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2012, 19:13:46 UTC
6672d90 Linus Torvalds 28 September 2012, 17:09:33 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David S Miller: 1) Netfilter xt_limit module can use uninitialized rules, from Jan Engelhardt. 2) Wei Yongjun has found several more spots where error pointers were treated as NULL/non-NULL and vice versa. 3) bnx2x was converted to pci_io{,un}map() but one remaining plain iounmap() got missed. From Neil Horman. 4) Due to a fence-post type error in initialization of inetpeer entries (which is where we store the ICMP rate limiting information), we can erroneously drop ICMPs if the inetpeer was created right around when jiffies wraps. Fix from Nicolas Dichtel. 5) smsc75xx resume fix from Steve Glendinnig. 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut. 7) qlcnic uses msleep() with locks held, fix from Narendra K. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netdev: octeon: fix return value check in octeon_mgmt_init_phy() inetpeer: fix token initialization qlcnic: Fix scheduling while atomic bug bnx2: Clean up remaining iounmap net: phy: smsc: Implement PHY config_init for LAN87xx smsc75xx: fix resume after device reset netdev: pasemi: fix return value check in pasemi_mac_phy_init() team: fix return value check l2tp: fix return value check netfilter: xt_limit: have r->cost != 0 case work 28 September 2012, 17:09:33 UTC
7596824 Linus Torvalds 28 September 2012, 17:02:53 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes; one for automount/lazy umount race, another a classic "we don't protect the refcount transition to zero with the lock that protects looking for object in hash" kind of crap in lockd." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: close the race in nlmsvc_free_block() do_add_mount()/umount -l races 28 September 2012, 17:02:53 UTC
9795660 Linus Torvalds 28 September 2012, 17:00:52 UTC Merge branch 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger. * 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Preinclude include/linux/kern_levels.h um: Fix IPC on um um: kill thread->forking um: let signal_delivered() do SIGTRAP on singlestepping into handler um: don't leak floating point state and segment registers on execve() um: take cleaning singlestep to start_thread() 28 September 2012, 17:00:52 UTC
c3a086e Linus Torvalds 28 September 2012, 17:00:01 UTC Merge tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm fixes from Alasdair G Kergon: "A few fixes for problems discovered during the 3.6 cycle. Of particular note, are fixes to the thin target's discard support, which I hope is finally working correctly; and fixes for multipath ioctls and device limits when there are no paths." * tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm verity: fix overflow check dm thin: fix discard support for data devices dm thin: tidy discard support dm: retain table limits when swapping to new table with no devices dm table: clear add_random unless all devices have it set dm: handle requests beyond end of device instead of using BUG_ON dm mpath: only retry ioctl when no paths if queue_if_no_path set dm thin: do not set discard_zeroes_data 28 September 2012, 17:00:01 UTC
99a1300 Andrea Arcangeli 28 September 2012, 12:35:31 UTC thp: avoid VM_BUG_ON page_count(page) false positives in __collapse_huge_page_copy Speculative cache pagecache lookups can elevate the refcount from under us, so avoid the false positive. If the refcount is < 2 we'll be notified by a VM_BUG_ON in put_page_testzero as there are two put_page(src_page) in a row before returning from this function. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2012, 15:38:09 UTC
0774e39 Joerg Roedel 28 September 2012, 14:14:44 UTC iommu/amd: Fix wrong assumption in iommu-group specific code The new IOMMU groups code in the AMD IOMMU driver makes the assumption that there is a pci_dev struct available for all device-ids listed in the IVRS ACPI table. Unfortunatly this assumption is not true and so this code causes a NULL pointer dereference at boot on some systems. Fix it by making sure the given pointer is never NULL when passed to the group specific code. The real fix is larger and will be queued for v3.7. Reported-by: Florian Dazinger <florian@dazinger.net> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 28 September 2012, 14:14:44 UTC
df555b6 Wei Yongjun 27 September 2012, 19:04:21 UTC netdev: octeon: fix return value check in octeon_mgmt_init_phy() In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2012, 05:18:32 UTC
6399413 Linus Torvalds 27 September 2012, 23:51:14 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "The three nouveau fixes quiten unneeded dmesg spam that people are seeing and pondering, The udl fix stops it from trying to driver monitors that are too big, where we get a black screen. And a vmware memory alloc problem." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN drm/udl: limit modes to the sku pixel limits. vmwgfx: corruption in vmw_event_fence_action_create() drm/nvc0/ltcg: mask off intr 0x10 drm/nouveau: silence a debug message triggered by newer userspace 27 September 2012, 23:51:14 UTC
a31fb69 Linus Torvalds 27 September 2012, 23:49:15 UTC Merge tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are two USB bugfixes for your 3.6-rc7 tree. The OHCI fix has been reported a number of times and is a regression from 3.5, and the patch that causes the regression was on the way to the -stable trees before I was reminded (again) that this fix needed to get to your tree soon. The host controller bugfix was reported in older kernels as being pretty easy to trigger, and has been tested by Red Hat and their customers. Both have been in the usb-next branch in the -next tree for a while now, I just cherry-picked them out to get to you in time for the 3.6 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Fix race condition when removing host controllers USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq 27 September 2012, 23:49:15 UTC
8dce30c Daniel Mack 27 September 2012, 08:26:01 UTC ALSA: snd-usb: fix next_packet_size calls for pause case Also fix the calls to next_packet_size() for the pause case. This was missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size"). Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de> Cc: stable@kernel.org [ Taking directly because Takashi is on vacation - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2012, 23:46:15 UTC
9a7c590 Linus Torvalds 27 September 2012, 23:42:35 UTC Merge tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound Pull ASoC update from Mark Brown: "One small and obvious driver-specific fix. Takashi is on vacation now so he asked me to send directly, it's a pretty bad bug with low regression risk." * tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: ASoC: wm2000: Correct register size 27 September 2012, 23:42:35 UTC
bc9259a Nicolas Dichtel 27 September 2012, 04:11:00 UTC inetpeer: fix token initialization When jiffies wraps around (for example, 5 minutes after the boot, see INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be < XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus some icmp packets can be unexpectedly dropped. Fix this case by initializing last_rate to 60 seconds in the past. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 23:27:39 UTC
68b3f28 Narendra K 25 September 2012, 07:53:19 UTC qlcnic: Fix scheduling while atomic bug In the device close path, 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock held resulting in scheduling while atomic bug causing the following trace. I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4 from John Fastabend addresses a similar issue in ixgbevf driver. Adopting the same approach used in the commit, this patch uses mdelay to address the issue. [79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002 [79885.005562] INFO: lockdep is turned off. [79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic] [79885.083608] Pid: 30846, comm: ip Tainted: G W O 3.6.0-rc7+ #1 [79885.090805] Call Trace: [79885.093569] [<ffffffff816764d8>] __schedule_bug+0x68/0x76 [79885.099699] [<ffffffff8168358e>] __schedule+0x99e/0xa00 [79885.105634] [<ffffffff81683929>] schedule+0x29/0x70 [79885.111186] [<ffffffff81680def>] schedule_timeout+0x16f/0x350 [79885.117724] [<ffffffff811afb7a>] ? init_object+0x4a/0x90 [79885.123770] [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140 [79885.130873] [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20 [79885.138773] [<ffffffff8107e830>] msleep+0x20/0x30 [79885.144159] [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic] [79885.151478] [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic] [79885.159868] [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic] [79885.167576] [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic] [79885.174708] [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic] [79885.181547] [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0 [79885.187899] [<ffffffff8153b548>] __dev_close+0x38/0x50 [79885.193761] [<ffffffff81545101>] __dev_change_flags+0xa1/0x180 [79885.200419] [<ffffffff81545298>] dev_change_flags+0x28/0x70 [79885.206779] [<ffffffff815531b8>] do_setlink+0x378/0xa00 [79885.212731] [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0 [79885.218612] [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560 [79885.224768] [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50 [79885.231217] [<ffffffff812cbf98>] ? security_capable+0x18/0x20 [79885.237765] [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0 [79885.244412] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.250280] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.256148] [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20 [79885.262413] [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0 [79885.268661] [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40 [79885.274727] [<ffffffff815708bd>] netlink_unicast+0x19d/0x220 [79885.281146] [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0 [79885.287595] [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0 [79885.294650] [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0 [79885.300600] [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0 [79885.306853] [<ffffffff8109be23>] ? up_read+0x23/0x40 [79885.312510] [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570 [79885.318968] [<ffffffff81191854>] ? sys_brk+0x44/0x150 [79885.324715] [<ffffffff811c458c>] ? fget_light+0x24c/0x520 [79885.330875] [<ffffffff815286f9>] sys_sendmsg+0x49/0x90 [79885.336707] [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 23:24:52 UTC
64f605c Neil Horman 26 September 2012, 07:22:02 UTC bnx2: Clean up remaining iounmap commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error path of bnx2_init_one though. This patch just cleans that up. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Michael Chan <mcan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 23:18:50 UTC
e556cb3 Linus Torvalds 27 September 2012, 22:47:24 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull one more arm-soc bugfix from Olof Johansson: "Here's a bugfix for orion5x. Without this, PCI doesn't initialize properly because of too small coherent pool to cover the allocations needed. A similar fix has already been done on kirkwood." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion5x: Fix too small coherent pool. 27 September 2012, 22:47:24 UTC
b56adb5 Linus Torvalds 27 September 2012, 22:46:04 UTC Merge branch 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull ARM dma-mapping fix from Marek Szyprowski: "This patch fixes a potential memory leak in the ARM dma-mapping code." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Fix potential memory leak in atomic_pool_init() 27 September 2012, 22:46:04 UTC
3961843 Linus Torvalds 27 September 2012, 22:45:20 UTC Merge tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver where a callback ignores one of its arguments. It needs to go into stable too so sending this upstream immediately." * tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio-lpc32xx: Fix value handling of gpio_direction_output() 27 September 2012, 22:45:20 UTC
d1d4bb9 Linus Torvalds 27 September 2012, 22:44:31 UTC Merge tag 'md-3.6-fixes' of git://neil.brown.name/md Pull two md bugfixes from NeilBrown: "One (missing spinlock init) was only introduced recently. The other has been present as long as raid10 has been supported, so is tagged for -stable." * tag 'md-3.6-fixes' of git://neil.brown.name/md: md/raid10: fix "enough" function for detecting if array is failed. md/raid5: add missing spin_lock_init. 27 September 2012, 22:44:31 UTC
5030fcb Linus Torvalds 27 September 2012, 22:43:36 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes from Mauro Carvalho Chehab: "Three edac fixes at the memory enumeration logic: - i3200_edac: Fixes a regression at the memory rank size, when the memorias are dual-rank; - i5000_edac: Fix a longstanding bug when calculating the memory size: before Kernel 3.6, the memory size were right only with one specific configuration; - sb_edac: Fixes a bug since the initial release of the driver: with 16GB DIMMs, there's an overflow at the memory size, causing the number of pages per dimm (an unsigned value) to have the highest bit equal to 1, effectively mangling the memory size. The third bug can potentially affect the error decoding logic as well." * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Avoid overflow errors at memory size calculation i5000: Fix the memory size calculation with 2R memories i3200_edac: Fix memory rank size 27 September 2012, 22:43:36 UTC
fd51790 J. Bruce Fields 18 September 2012, 20:35:51 UTC trivial select_parent documentation fix "Search list for X" sounds like you're trying to find X on a list. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2012, 22:43:08 UTC
b629820 Marek Vasut 25 September 2012, 10:17:42 UTC net: phy: smsc: Implement PHY config_init for LAN87xx The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving capability. Enabling it leads to the PHY not being able to detect Link when cold-started without cable connected. Thus, make sure this is disabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christian Hohnstaedt <chohnstaedt@innominate.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 22:28:30 UTC
a3cff12 Steve Glendinning 24 September 2012, 04:42:59 UTC smsc75xx: fix resume after device reset On some systems this device fails to properly resume after suspend, this patch fixes it by running the usbnet_resume handler. I suspect this also fixes this bug: http://code.google.com/p/chromium-os/issues/detail?id=31871 Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 21:59:30 UTC
9429ec9 Geert Uytterhoeven 16 August 2012, 18:15:05 UTC um: Preinclude include/linux/kern_levels.h The userspace part of UML uses the asm-offsets.h generator mechanism to create definitions for UM_KERN_<LEVEL> that match the in-kernel KERN_<LEVEL> constant definitions. As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e. it contains two parts. However, the combo of DEFINE_STR() in arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't support string literals consisting of multiple parts. Hence for all UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual definition, while the remainder ends up in the comment. E.g. in include/generated/asm-offsets.h we get #define UM_KERN_INFO "\001" /* "6" KERN_INFO */ instead of #define UM_KERN_INFO "\001" "6" /* KERN_INFO */ This causes spurious '^A' output in some kernel messages: Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 ^AChecking that host ptys support output SIGIO...Yes ^AChecking that host ptys support SIGIO on close...No, enabling workaround ^AUsing 2.6 host AIO NET: Registered protocol family 16 bio: create slab <bio-0> at 0 Switching to clocksource itimer To fix this: - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from arch/um/include/shared/common-offsets.h to arch/um/include/shared/user.h, which is preincluded for all userspace parts, - Preinclude include/linux/kern_levels.h for all userspace parts, to obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't violate the kernel/userspace separation, as include/linux/kern_levels.h is self-contained and doesn't expose any other kernel internals. - Remove the now unused STR() and DEFINE_STR() macros. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at> 27 September 2012, 18:20:09 UTC
bbb35ef Richard Weinberger 27 September 2012, 18:10:57 UTC um: Fix IPC on um commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION) forgot UML and broke IPC on it. Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig. Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at> 27 September 2012, 18:12:35 UTC
beb5ac2 Wei Yongjun 26 September 2012, 19:51:58 UTC netdev: pasemi: fix return value check in pasemi_mac_phy_init() In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 17:20:50 UTC
a326e6d Wei Yongjun 24 September 2012, 18:29:35 UTC team: fix return value check In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 17:18:19 UTC
7f8436a Wei Yongjun 24 September 2012, 18:29:01 UTC l2tp: fix return value check In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 17:18:19 UTC
392b408 David S. Miller 27 September 2012, 17:16:14 UTC Merge branch 'master' of git://1984.lsi.us.es/nf Pablo Neira Ayuso says: ==================== If time allows, I'd appreciate if you can take the following fix for the xt_limit match. As Jan indicates, random things may occur while using the xt_limit match due to use of uninitialized memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2012, 17:16:14 UTC
0d00dc2 Alan Stern 26 September 2012, 17:09:53 UTC USB: Fix race condition when removing host controllers This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 September 2012, 16:17:49 UTC
01bb650 Joachim Eastwood 23 September 2012, 20:56:00 UTC USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq Fixes the following NULL pointer dereference: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [<c01392d4>] lr : [<bf08f694>] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [<c01392bc>] (__gpio_to_irq+0x0/0x40) from [<bf08f694>] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [<bf08f670>] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [<c0051264>] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [<c005122c>] (handle_irq_event_percpu+0x0/0x1a8) from [<c005142c>] (handle_irq_event+0x58/0x7c) [ 7.810000] [<c00513d4>] (handle_irq_event+0x0/0x7c) from [<c0053f24>] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [<c0053e78>] (handle_simple_irq+0x0/0xd8) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c00124d0>] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [<c0012428>] (gpio_irq_handler+0x0/0xfc) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c0009b08>] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [<c0009aa4>] (handle_IRQ+0x0/0x88) from [<c0008510>] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [<c00084e0>] (at91_aic_handle_irq+0x0/0x38) from [<c0008eb4>] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [<c00520c8>] (__setup_irq+0x0/0x458) from [<c0052764>] (request_threaded_irq+0xd8/0x134) [ 7.810000] [<c005268c>] (request_threaded_irq+0x0/0x134) from [<bf090978>] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [<bf0907f8>] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [<c0155b7c>] (platform_drv_probe+0x20/0x24) [ 7.810000] [<c0155b5c>] (platform_drv_probe+0x0/0x24) from [<c0154690>] (driver_probe_device+0xb8/0x20c) [ 7.810000] [<c01545d8>] (driver_probe_device+0x0/0x20c) from [<c015484c>] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [<c01547e4>] (__driver_attach+0x0/0x88) from [<c0152e58>] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [<c0152dfc>] (bus_for_each_dev+0x0/0x9c) from [<c01544c0>] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [<c01544a0>] (driver_attach+0x0/0x28) from [<c01536cc>] (bus_add_driver+0xb4/0x22c) [ 7.810000] [<c0153618>] (bus_add_driver+0x0/0x22c) from [<c0154e9c>] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0154df4>] (driver_register+0x0/0x144) from [<c0155f58>] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0155f0c>] (platform_driver_register+0x0/0x60) from [<bf093054>] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [<bf093000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c0008638>] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [<c000858c>] (do_one_initcall+0x0/0x174) from [<c004fdc4>] (sys_init_module+0x7c/0x1a0) [ 7.810000] [<c004fd48>] (sys_init_module+0x0/0x1a0) from [<c0009260>] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of ports) started setting unused pins to EINVAL. But this exposed a bug in the ohci_hcd_at91_overcurrent_irq function where the gpio was used without being checked to see if it is valid. This patches fixed the issue by adding the gpio valid check. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: stable <stable@vger.kernel.org> # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 September 2012, 16:16:38 UTC
d2ce4e9 Al Viro 20 September 2012, 13:28:25 UTC um: kill thread->forking we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2012, 16:04:55 UTC
f9a38ea Al Viro 06 September 2012, 17:39:47 UTC um: let signal_delivered() do SIGTRAP on singlestepping into handler ... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2012, 16:04:47 UTC
bf56d57 Al Viro 06 September 2012, 03:20:33 UTC um: don't leak floating point state and segment registers on execve() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2012, 16:04:38 UTC
4245979 Al Viro 03 September 2012, 07:24:18 UTC um: take cleaning singlestep to start_thread() ... assuming it's needed to be done at all Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 27 September 2012, 16:04:26 UTC
d638163 Dave Airlie 27 September 2012, 07:58:53 UTC Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Another spurious dmesg quitening. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN 27 September 2012, 07:58:53 UTC
80b4812 NeilBrown 27 September 2012, 02:35:21 UTC md/raid10: fix "enough" function for detecting if array is failed. The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: stable@vger.kernel.org Reported-by: Jakub Husák <jakub@gooseman.cz> Signed-off-by: NeilBrown <neilb@suse.de> 27 September 2012, 02:35:21 UTC
84d5dfb Andrew Lunn 24 September 2012, 05:54:33 UTC ARM: Orion5x: Fix too small coherent pool. Some Orion5x devices allocate their coherent buffers from atomic context. Increase size of atomic coherent pool to make sure such the allocations won't fail during boot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net> 26 September 2012, 23:48:47 UTC
833dd82 Ben Skeggs 26 September 2012, 23:13:43 UTC drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO, the binary driver appears to completely ignore it in its PFIFO interrupt handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init time. The bits still light up in the hardware sometimes though, so lets just ignore any bits we haven't explicitely requested. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 26 September 2012, 23:13:43 UTC
1d55f6b Mikulas Patocka 26 September 2012, 22:45:48 UTC dm verity: fix overflow check This patch fixes sector_t overflow checking in dm-verity. Without this patch, the code checks for overflow only if sector_t is smaller than long long, not if sector_t and long long have the same size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:48 UTC
0424caa Mike Snitzer 26 September 2012, 22:45:47 UTC dm thin: fix discard support for data devices The discard limits that get established for a thin-pool or thin device may be incompatible with the pool's data device. Avoid this by checking the discard limits of the pool's data device. If an incompatibility is found then the pool's 'discard passdown' feature is disabled. Change thin_io_hints to ensure that a thin device always uses the same queue limits as its pool device. Introduce requested_pf to track whether or not the table line originally contained the no_discard_passdown flag and use this directly for table output. We prepare the correct setting for discard_passdown directly in bind_control_target (called from pool_io_hints) and store it in adjusted_pf rather than waiting until we have access to pool->pf in pool_preresume. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:47 UTC
9bc142d Mike Snitzer 26 September 2012, 22:45:46 UTC dm thin: tidy discard support A little thin discard code refactoring to make the next patch (dm thin: fix discard support for data devices) more readable. Pull out a couple of functions (and uses bools instead of unsigned for features). No functional changes. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:46 UTC
3ae7065 Mike Snitzer 26 September 2012, 22:45:45 UTC dm: retain table limits when swapping to new table with no devices Add a safety net that will re-use the DM device's existing limits in the event that DM device has a temporary table that doesn't have any component devices. This is to reduce the chance that requests not respecting the hardware limits will reach the device. DM recalculates queue limits based only on devices which currently exist in the table. This creates a problem in the event all devices are temporarily removed such as all paths being lost in multipath. DM will reset the limits to the maximum permissible, which can then assemble requests which exceed the limits of the paths when the paths are restored. The request will fail the blk_rq_check_limits() test when sent to a path with lower limits, and will be retried without end by multipath. This became a much bigger issue after v3.6 commit fe86cdcef ("block: do not artificially constrain max_sectors for stacking drivers"). Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:45 UTC
c3c4555 Milan Broz 26 September 2012, 22:45:43 UTC dm table: clear add_random unless all devices have it set Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not have it set. Otherwise devices with predictable characteristics may contribute entropy. QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings contribute to the random pool. For bio-based targets this flag is always 0 because such devices have no real queue. For request-based devices this flag was always set to 1 by default. Now set it according to the flags on underlying devices. If there is at least one device which should not contribute, set the flag to zero: If a device, such as fast SSD storage, is not suitable for supplying entropy, a request-based queue stacked over it will not be either. Because the checking logic is exactly same as for the rotational flag, share the iteration function with device_is_nonrot(). Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:43 UTC
ba1cbad Mike Snitzer 26 September 2012, 22:45:42 UTC dm: handle requests beyond end of device instead of using BUG_ON The access beyond the end of device BUG_ON that was introduced to dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement REQ_FLUSH/FUA support for request-based dm") was an overly drastic (but simple) response to this situation. I have received a report that this BUG_ON was hit and now think it would be better to use dm_kill_unmapped_request() to fail the clone and original request with -EIO. map_request() will assign the valid target returned by dm_table_find_target to tio->ti. But when the target isn't valid tio->ti is never assigned (because map_request isn't called); so add a check for tio->ti != NULL to dm_done(). Reported-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:42 UTC
7ba10aa Mike Snitzer 26 September 2012, 22:45:41 UTC dm mpath: only retry ioctl when no paths if queue_if_no_path set When there are no paths and multipath receives an ioctl, it waits until a path becomes available. This behaviour is incorrect if the "queue_if_no_path" setting was not specified, as then the ioctl should be rejected immediately, which this patch now does. commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should have checked if queue_if_no_path was configured before queueing IO. Checking for the queue_if_no_path feature, like is done in map_io(), allows the following table load to work without blocking in the multipath_ioctl retry loop: echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs Without this fix the multipath_ioctl will block with the following stack trace: blkid D 0000000000000002 0 23936 1 0x00000000 ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440 ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440 ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040 Call Trace: [<ffffffff814ce099>] schedule+0x29/0x70 [<ffffffff814cc312>] schedule_timeout+0x182/0x2e0 [<ffffffff8104dee0>] ? lock_timer_base+0x70/0x70 [<ffffffff814cc48e>] schedule_timeout_uninterruptible+0x1e/0x20 [<ffffffff8104f840>] msleep+0x20/0x30 [<ffffffffa0000839>] multipath_ioctl+0x109/0x170 [dm_multipath] [<ffffffffa06bfb9c>] dm_blk_ioctl+0xbc/0xd0 [dm_mod] [<ffffffff8122a408>] __blkdev_driver_ioctl+0x28/0x30 [<ffffffff8122a79e>] blkdev_ioctl+0xce/0x730 [<ffffffff811970ac>] block_ioctl+0x3c/0x40 [<ffffffff8117321c>] do_vfs_ioctl+0x8c/0x340 [<ffffffff81166293>] ? sys_newfstat+0x33/0x40 [<ffffffff81173571>] sys_ioctl+0xa1/0xb0 [<ffffffff814d70a9>] system_call_fastpath+0x16/0x1b Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.5+ Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:41 UTC
307615a Mike Snitzer 26 September 2012, 22:45:39 UTC dm thin: do not set discard_zeroes_data The dm thin pool target claims to support the zeroing of discarded data areas. This turns out to be incorrect when processing discards that do not exactly cover a complete number of blocks, so the target must always set discard_zeroes_data_unsupported. The thin pool target will zero blocks when they are allocated if the skip_block_zeroing feature is not specified. The block layer may send a discard that only partly covers a block. If a thin pool block is partially discarded then there is no guarantee that the discarded data will get zeroed before it is accessed again. Due to this, thin devices cannot claim discards will always zero data. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Alasdair G Kergon <agk@redhat.com> 26 September 2012, 22:45:39 UTC
5e19997 Linus Torvalds 26 September 2012, 21:28:17 UTC Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming Pull c6x arch fixes from Mark Salter: - Add __NR_kcmp to generic syscall list - C6X: Use generic asm/barrier.h * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: syscalls: add __NR_kcmp syscall to generic unistd.h c6x: use asm-generic/barrier.h 26 September 2012, 21:28:17 UTC
7106891 Dave Jiang 25 September 2012, 22:24:56 UTC MAINTAINERS: update Intel C600 SAS driver maintainers Cc: Lukasz Dorau <lukasz.dorau@intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 September 2012, 21:27:53 UTC
11ef4cf Mark Salter 24 September 2012, 19:19:26 UTC syscalls: add __NR_kcmp syscall to generic unistd.h Commit d97b46a64 ("syscalls, x86: add __NR_kcmp syscall" ) added a new syscall to support checkpoint restore. It is currently x86-only, but that restriction will be removed in a subsequent patch. Unfortunately, the kernel checksyscalls script had a bug which suppressed any warning to other architectures that the kcmp syscall was not implemented. A patch to checksyscalls is being tested in linux-next and other architectures are seeing warnings about kcmp being unimplemented. This patch adds __NR_kcmp to <asm-generic/unistd.h> so that kcmp is wired in for architectures using the generic syscall list. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 26 September 2012, 19:26:30 UTC
d0e12f3 Mark Brown 26 September 2012, 10:57:30 UTC ASoC: wm2000: Correct register size Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org 26 September 2012, 11:06:20 UTC
3a75885 Dave Airlie 25 September 2012, 06:17:43 UTC drm/udl: limit modes to the sku pixel limits. Otherwise when X starts we commonly get a black screen scanning out nothing, its wierd dpms on/off from userspace brings it back, With this on F18, multi-seat works again with my 1920x1200 monitor which is above the sku limit for the device I have. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 26 September 2012, 08:40:21 UTC
68c4fce Dan Carpenter 23 September 2012, 16:33:55 UTC vmwgfx: corruption in vmw_event_fence_action_create() We don't allocate enough data for this struct. As soon as we start modifying event->event on the next lines, then we're going beyond the end of the memory we allocated. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com> 26 September 2012, 08:40:06 UTC
4f20d9e Dave Airlie 26 September 2012, 08:36:55 UTC Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes These just silence some printks that we are seeing that we shouldn't * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/ltcg: mask off intr 0x10 drm/nouveau: silence a debug message triggered by newer userspace 26 September 2012, 08:36:55 UTC
79eee7a Ben Skeggs 26 September 2012, 02:43:10 UTC drm/nvc0/ltcg: mask off intr 0x10 NVIDIA do that at startup too on Fermi, so perhaps the heap of 0x10 intrs we receive are normal and we can ignore them. On Kepler NVIDIA *don't* do this, but the hardware appears to come up with the bit masked off by default - so that's probably why :) This should silence some interrupt spam seen on Fermi+ boards. Backported patch from reworked nouveau kernel tree. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 26 September 2012, 02:43:10 UTC
c7ead11 Ben Skeggs 26 September 2012, 02:41:19 UTC drm/nouveau: silence a debug message triggered by newer userspace Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 26 September 2012, 02:41:19 UTC
82e6bfe Jan Engelhardt 21 September 2012, 22:26:52 UTC netfilter: xt_limit: have r->cost != 0 case work Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when a running state is saved to userspace and then reinstated from there. Make sure that private xt_limit area is initialized with correct values. Otherwise, random matchings due to use of uninitialized memory. Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 25 September 2012, 23:33:16 UTC
6f0f9b6 Linus Torvalds 25 September 2012, 21:20:29 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull more networking fixes from David Miller: 1) Eric Dumazet discovered and fixed what turned out to be a family of bugs. These functions were using pskb_may_pull() which might need to reallocate the linear SKB data buffer, but the callers were not expecting this possibility. The callers have cached pointers to the packet header areas, and would need to reload them if we were to continue using pskb_may_pull(). So they could end up reading garbage. It's easier to just change these RAW4/RAW6/MIP6 routines to use skb_header_pointer() instead of pskb_may_pull(), which won't modify the linear SKB data area. 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can call down into the TCP keepalive code. The case basically involves creating a raw socket with sk_protocol == IPPROTO_TCP, then calling setsockopt(sock_fd, SO_KEEPALIVE, ...) Fixed by Eric Dumazet. 3) Bluetooth devices do not get configured properly while being powered on, resulting in always using legacy pairing instead of SSP. Fix from Andrzej Kaczmarek. 4) Bluetooth cancels delayed work erroneously, put stricter checks in place. From Andrei Emeltchenko. 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in cfg80211, from Luis R. Rodriguez. 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach. 7) Missing module license in bcm87xx driver, from Peter Huewe. 8) Team driver can lose port changed events when adding devices to a team, fix from Jiri Pirko. 9) Fix endless loop when trying ot unregister PPPOE device in zombie state, from Xiaodong Xu. 10) batman-adv layer needs to set MAC address of software device earlier, otherwise we call tt_local_add with it uninitialized. 11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but that doesn't program the device properly. From Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: mip6: fix mip6_mh_filter() ipv6: raw: fix icmpv6_filter() net: guard tcp_set_keepalive() to tcp sockets phy/micrel: Add missing header to micrel_phy.h phy/micrel: Rename KS80xx to KSZ80xx phy/micrel: Implement support for KSZ8021 batman-adv: Fix symmetry check / route flapping in multi interface setups batman-adv: Fix change mac address of soft iface. pppoe: drop PPPOX_ZOMBIEs in pppoe_release team: send port changed when added ipv4: raw: fix icmp_filter() net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver iwlwifi: don't double free the interrupt in failure path cfg80211: fix possible circular lock on reg_regdb_search() Bluetooth: Fix not removing power_off delayed work Bluetooth: Fix freeing uninitialized delayed works Bluetooth: mgmt: Fix enabling LE while powered off Bluetooth: mgmt: Fix enabling SSP while powered off 25 September 2012, 21:20:29 UTC
96af69e Eric Dumazet 25 September 2012, 20:01:28 UTC ipv6: mip6: fix mip6_mh_filter() mip6_mh_filter() should not modify its input, or else its caller would need to recompute ipv6_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 September 2012, 20:04:44 UTC
78cc88c David S. Miller 25 September 2012, 17:24:02 UTC Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge Included fixes: - fix the behaviour of batman-adv in case of virtual interface MAC change event - fix symmetric link check in neighbour selection Signed-off-by: David S. Miller <davem@davemloft.net> 25 September 2012, 17:24:02 UTC
1b05c4b Eric Dumazet 25 September 2012, 07:03:40 UTC ipv6: raw: fix icmpv6_filter() icmpv6_filter() should not modify its input, or else its caller would need to recompute ipv6_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() and change the prototype to make clear both sk and skb are const. Also, if icmpv6 header cannot be found, do not deliver the packet, as we do in IPv4. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 September 2012, 17:21:49 UTC
9391734 Linus Torvalds 25 September 2012, 16:20:48 UTC Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh Pull SuperH fix from Paul Mundt: "One last minute regression fix.." * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: pfc: Fix up GPIO mux type reconfig case. 25 September 2012, 16:20:48 UTC
e108a3c Linus Torvalds 25 September 2012, 16:00:02 UTC Merge branch 'akpm' (sundry from Andrew) Merge misc fixes from Andrew Morton: "One maintainer change and three bugfixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (4 commits) c/r: prctl: fix build error for no-MMU case lib/flex_proportions.c: fix corruption of denominator in flexible proportions checksyscalls: fix "here document" handling pwm-backlight: take over maintenance 25 September 2012, 16:00:02 UTC
be8cfc4 Mark Salter 25 September 2012, 00:17:38 UTC c/r: prctl: fix build error for no-MMU case Commit 1ad75b9e1628 ("c/r: prctl: add minimal address test to PR_SET_MM") added some address checking to prctl_set_mm() used by checkpoint-restore. This causes a build error for no-MMU systems: kernel/sys.c: In function 'prctl_set_mm': kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function) The test for mmap_min_addr doesn't make a lot of sense for no-MMU code as noted in commit 6e1415467614 ("NOMMU: Optimise away the {dac_,}mmap_min_addr tests"). This patch defines mmap_min_addr as 0UL in the no-MMU case so that the compiler will optimize away tests for "addr < mmap_min_addr". Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: <stable@vger.kernel.org> [3.6.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2012, 15:59:21 UTC
b5bd6a0 Jan Kara 25 September 2012, 00:17:35 UTC lib/flex_proportions.c: fix corruption of denominator in flexible proportions When racing with CPU hotplug, percpu_counter_sum() can return negative values for the number of observed events. This confuses fprop_new_period(), which uses unsigned type and as a result number of events is set to big *positive* number. From that moment on, things go pear shaped and can result e.g. in division by zero as denominator is later truncated to 32-bits. This bug causes a divide-by-zero oops in bdi_dirty_limit() in Borislav's 3.6.0-rc6 based kernel. Fix the issue by using a signed type in fprop_new_period(). That makes us bail out from the function without doing anything (mistakenly) thinking there are no events to age. That makes aging somewhat inaccurate but getting accurate data would be rather hard. Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Borislav Petkov <bp@amd64.org> Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2012, 15:59:21 UTC
0e75898 Heiko Carstens 25 September 2012, 00:17:33 UTC checksyscalls: fix "here document" handling "echo" doesn't read from stdin, therefore the checksyscalls script didn't warn about not implemented system calls anymore since 29dc54c6 ("checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source"). Use "cat" instead of "echo" which handles this correctly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Marek <mmarek@suse.cz> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2012, 15:59:21 UTC
a140b98 Thierry Reding 25 September 2012, 00:17:30 UTC pwm-backlight: take over maintenance Since the pwm-backlight driver is lacking a proper maintainer and is the heaviest user of the PWM framework I'm taking over maintenance. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Arun Murthy <arun.murthy@stericsson.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Robert Morell <rmorell@nvidia.com> Cc: Dilan Lee <dilee@nvidia.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2012, 15:59:21 UTC
deb09dd Mauro Carvalho Chehab 20 September 2012, 15:09:30 UTC sb_edac: Avoid overflow errors at memory size calculation Sandy bridge EDAC is calculating the memory size with overflow. Basically, the size field and the integer calculation is using 32 bits. More bits are needed, when the DIMM memories have high density. The net result is that memories are improperly reported there, when high-density DIMMs are used: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 As the number of pages value is handled at the EDAC core as unsigned ints, the driver shows the 16 GB memories at sysfs interface as 16760832 MB! The fix is simple: calculate the number of pages as unsigned 64-bits integer. After the patch, the memory size (16 GB) is properly detected: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 25 September 2012, 10:38:20 UTC
b70f833 Mauro Carvalho Chehab 10 September 2012, 16:25:50 UTC i5000: Fix the memory size calculation with 2R memories When 2R memories are found, the memory size should be multiplied by two, otherwise, it will report half of the memory size: +-----------------------------------------------+ | mc0 | | branch0 | branch1 | | channel0 | channel1 | channel0 | channel1 | -------+-----------------------------------------------+ slot3: | 0 MB | 0 MB | 0 MB | 0 MB | slot2: | 0 MB | 0 MB | 0 MB | 0 MB | -------+-----------------------------------------------+ slot1: | 0 MB | 0 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------------------+ (the above machine have 4 x 2GB 2R memories) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 25 September 2012, 10:38:19 UTC
582a899 Mauro Carvalho Chehab 02 August 2012, 20:58:23 UTC i3200_edac: Fix memory rank size commit a895bf8b1e1ea4c032a8fa8a09475a2ce09fe77a incorrectly changed the logic that fills the memory bank size. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 25 September 2012, 10:32:33 UTC
bef83de Alex Williamson 25 September 2012, 03:23:25 UTC iommu: static inline iommu group stub functions Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 25 September 2012, 10:14:56 UTC
16d74eb Paul Mundt 25 September 2012, 02:51:05 UTC sh: pfc: Fix up GPIO mux type reconfig case. Some drivers need to switch pin states between GPIO and pin function at runtime, which was inadvertently broken in the pinctrl driver for GPIOs being bound to a specific direction. This fixes up the request path to ensure that previously configured GPIOs don't cause us to inadvertently error out with an unsupported mux on reconfig, which in practice is primarily aimed at trapping pull-up/down users that have yet to be implemented under the new API. Fixes up regressions in the TPU PWM driver, amongst others. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 25 September 2012, 02:51:05 UTC
41e2685 David S. Miller 25 September 2012, 02:00:00 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull this last(?) batch of fixes intended for 3.6... For the Bluetooth bits, Gustavo says this: "Here goes probably my last update to 3.6. It includes the two patches you were ok last week(from Andrzej Kaczmarek), those are critical ones, and two other fixes one for a system crash and the other for a missing lockdep annotation." The referenced fixes from Andrzej prevent attempts to configure devices that are powered-off. Along with the Bluetooth fixes, there are a couple of 802.11 fixes. Emmanuel Grumbach gives us an iwlwifi fix to prevent releasing an interrupt twice. Luis R. Rodriguez provides a fix for a possible circular lock dependency in the cfg80211 regulatory enforcement code. All of these have been in linux-next for a few days. I hope they are not too late to make the 3.6 release! ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 25 September 2012, 02:00:00 UTC
56d27ad Linus Torvalds 24 September 2012, 23:17:17 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile gxio ABI fix from Chris Metcalf: "This fixes a last-minute change in the Tilera hypervisor ABI for TRIO (PCI root complex) support. We've locked in this ABI going forward and will make sure no further ABI changes like this occur." * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: gxio iorpc numbering change for TRIO interface 24 September 2012, 23:17:17 UTC
1abbce4 Linus Torvalds 24 September 2012, 23:16:33 UTC Merge tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio Pull vfio fixes from Alex Williamson: "VFIO doc update and virqfd race fix" * tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio: vfio: Fix virqfd release race vfio: Trivial Documentation correction 24 September 2012, 23:16:33 UTC
0c59f23 Linus Torvalds 24 September 2012, 23:14:34 UTC Merge tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull a Xen fix from Konrad Rzeszutek Wilk: "It is a bug-fix when we run the initial PV guest on a AMD K8 machine and have CONFIG_AMD_NUMA enabled and detect the NUMA topology from the Northbridge. We end up in the situation where the initial domain gets too much information and gets confused and crashes - the fix is to restrict the domain to get the information - and we do it by just disabling NUMA on the PV guest (the hypervisor is still able to do its proper NUMA allocations of guests). It is OK to disable the PV guest from accessing NUMA data as right now we do not inject any NUMA node information to the PV guests. When we do get to that point, then this patch will have to be reverted." * Disable PV NUMA support as we do not do anything with it (yet) and it can cause bootup crashes on certain AMD machines. * tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/boot: Disable NUMA for PV guests. 24 September 2012, 23:14:34 UTC
bee2d97 Linus Torvalds 24 September 2012, 23:13:49 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two ceph fixes from Sage Weil: "The first fixes a leak in the rbd setup error path, and the second fixes a more serious problem with mismatched kmap/kunmap that surfaced after the recent refactoring work." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: only kunmap kmapped pages rbd: drop dev reference on error in rbd_open() 24 September 2012, 23:13:49 UTC
3e10986 Eric Dumazet 24 September 2012, 07:00:11 UTC net: guard tcp_set_keepalive() to tcp sockets Its possible to use RAW sockets to get a crash in tcp_set_keepalive() / sk_reset_timer() Fix is to make sure socket is a SOCK_STREAM one. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 September 2012, 20:51:53 UTC
b1268d3 Roland Stigge 20 September 2012, 08:48:03 UTC gpio-lpc32xx: Fix value handling of gpio_direction_output() For GPIOs of gpio-lpc32xx, gpio_direction_output() ignores the value argument (initial value of output). This patch fixes this by setting the level accordingly. Cc: stable@kernel.org Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 24 September 2012, 19:56:01 UTC
69190e6 Marek Vasut 23 September 2012, 16:58:51 UTC phy/micrel: Add missing header to micrel_phy.h The license header was missing in micrel_phy.h . This patch adds one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 September 2012, 19:54:33 UTC
510d573 Marek Vasut 23 September 2012, 16:58:50 UTC phy/micrel: Rename KS80xx to KSZ80xx There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 24 September 2012, 19:54:33 UTC
212ea99 Marek Vasut 23 September 2012, 16:58:49 UTC phy/micrel: Implement support for KSZ8021 The KSZ8021 PHY was previously caught by KS8051, which is not correct. This PHY needs additional setup if it is strapped for address 0. In such case an reserved bit must be written in the 0x16, "Operation Mode Strap Override" register. According to the KS8051 datasheet, that bit means "PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021. The issue where the ethernet controller (Freescale FEC) did not communicate with network is fixed by writing this bit as 1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 September 2012, 19:54:32 UTC
e70cf54 Chris Metcalf 24 September 2012, 18:57:58 UTC tile: gxio iorpc numbering change for TRIO interface An ABI numbering change was made in the hypervisor for Tilera's 4.1 MDE release (just shipped). It's incompatible with the previous 4.0 release ABI numbering, so we track the new numbering going forward. We plan to avoid modifying ABI numbering for these interfaces again. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> 24 September 2012, 19:11:53 UTC
b02d617 Mark Salter 21 September 2012, 18:35:49 UTC c6x: use asm-generic/barrier.h A recent patch in the linux-next tree caused a build failure on C6X because C6X didn't define a read_barrier_depends() macro. C6X does not support SMP and the architecture doesn't provide any special memory ordering instructions, so it makes sense to just use the generic barrier.h rather than patching the existing c6x specific header. Signed-off-by: Mark Salter <msalter@redhat.com> 24 September 2012, 18:39:36 UTC
8d54db7 Konrad Rzeszutek Wilk 17 August 2012, 14:22:37 UTC xen/boot: Disable NUMA for PV guests. The hypervisor is in charge of allocating the proper "NUMA" memory and dealing with the CPU scheduler to keep them bound to the proper NUMA node. The PV guests (and PVHVM) have no inkling of where they run and do not need to know that right now. In the future we will need to inject NUMA configuration data (if a guest spans two or more NUMA nodes) so that the kernel can make the right choices. But those patches are not yet present. In the meantime, disable the NUMA capability in the PV guest, which also fixes a bootup issue. Andre says: "we see Dom0 crashes due to the kernel detecting the NUMA topology not by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA). This will detect the actual NUMA config of the physical machine, but will crash about the mismatch with Dom0's virtual memory. Variation of the theme: Dom0 sees what it's not supposed to see. This happens with the said config option enabled and on a machine where this scanning is still enabled (K8 and Fam10h, not Bulldozer class) We have this dump then: NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10 Scanning NUMA topology in Northbridge 24 Number of physical nodes 4 Node 0 MemBase 0000000000000000 Limit 0000000040000000 Node 1 MemBase 0000000040000000 Limit 0000000138000000 Node 2 MemBase 0000000138000000 Limit 00000001f8000000 Node 3 MemBase 00000001f8000000 Limit 0000000238000000 Initmem setup node 0 0000000000000000-0000000040000000 NODE_DATA [000000003ffd9000 - 000000003fffffff] Initmem setup node 1 0000000040000000-0000000138000000 NODE_DATA [0000000137fd9000 - 0000000137ffffff] Initmem setup node 2 0000000138000000-00000001f8000000 NODE_DATA [00000001f095e000 - 00000001f0984fff] Initmem setup node 3 00000001f8000000-0000000238000000 Cannot find 159744 bytes in node 3 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96 Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar RIP: e030:[<ffffffff81d220e6>] [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96 .. snip.. [<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178 [<ffffffff81d23348>] sparse_init+0xe4/0x25a [<ffffffff81d16840>] paging_init+0x13/0x22 [<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b [<ffffffff81683954>] ? printk+0x3c/0x3e [<ffffffff81d01a38>] start_kernel+0xe5/0x468 [<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1 [<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36 [<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c " so we just disable NUMA scanning by setting numa_off=1. CC: stable@vger.kernel.org Reported-and-Tested-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 24 September 2012, 12:47:20 UTC
ec10665 Sachin Kamat 24 September 2012, 06:35:03 UTC ARM: dma-mapping: Fix potential memory leak in atomic_pool_init() When either of __alloc_from_contiguous or __alloc_remap_buffer fails to provide a valid pointer, allocated memory is freed up and an error is returned. 'pages' was however not freed before returning error. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> 24 September 2012, 06:35:03 UTC
cb13ff6 NeilBrown 24 September 2012, 06:27:20 UTC md/raid5: add missing spin_lock_init. commit b17459c05000fdbe8d10946570a26510f86ec0f raid5: add a per-stripe lock added a spin_lock to the 'stripe_head' struct. Unfortunately there are two places where this struct is allocated but the spin lock was only initialised in one of them. So add the missing spin_lock_init. Signed-off-by: NeilBrown <neilb@suse.de> 24 September 2012, 06:27:20 UTC
979570e Linus Torvalds 24 September 2012, 01:10:57 UTC Linux 3.6-rc7 24 September 2012, 01:10:57 UTC
56bae80 Linus Torvalds 23 September 2012, 22:40:58 UTC Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "There are two more kbuild fixes for 3.6. One fixes a race between x86's archscripts target and the rule (re)building scripts/basic/fixdep. The second is a fix for the previous attempt at fixing make firmware_install with make 3.82. This new solution should work with any version of GNU make" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: archscripts depends on scripts_basic firmware: fix directory creation rule matching with make 3.80 23 September 2012, 22:40:58 UTC
0737c8d Linus Torvalds 23 September 2012, 21:50:15 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon subsystem fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (fam15h_power) Tweak runavg_range on resume hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug 23 September 2012, 21:50:15 UTC
0bf7a70 Linus Torvalds 23 September 2012, 21:48:28 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four essential fixes: two oops related (bnx2i, virtio-scsi), one data corruption related (hpsa) and one failure to boot due to interrupt routing issues (mpt2ss). Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] hpsa: fix handling of protocol error [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list 23 September 2012, 21:48:28 UTC
faa2ad0 Shaun Ruffell 23 September 2012, 01:26:38 UTC edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs. Fix potential NULL pointer dereference in edac_unregister_sysfs() on system boot introduced in 3.6-rc1. Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct device") edac_mc_alloc() no longer initializes embedded kobjects in struct mem_ctl_info. Therefore edac_mc_free() can no longer simply decrement a kobject reference count to free the allocated memory unless the memory controller driver module had also called edac_mc_add_mc(). Now edac_mc_free() will check if the newly embedded struct device has been registered with sysfs before using either the standard device release functions or freeing the data structures itself with logic pulled out of the error path of edac_mc_alloc(). The BUG this patch resolves for me: BUG: unable to handle kernel NULL pointer dereference at (null) EIP is at __wake_up_common+0x1a/0x6a Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000) Call Trace: complete_all+0x3f/0x50 device_pm_remove+0x23/0xa2 device_del+0x34/0x142 edac_unregister_sysfs+0x3b/0x5c [edac_core] edac_mc_free+0x29/0x2f [edac_core] e7xxx_probe1+0x268/0x311 [e7xxx_edac] e7xxx_init_one+0x56/0x61 [e7xxx_edac] local_pci_probe+0x13/0x15 ... Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2012, 21:46:40 UTC
ef6e781 Fengguang Wu 23 September 2012, 00:18:06 UTC edac_mc: fix messy kfree calls in the error path coccinelle warns about: + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429 421 if (mci->csrows) { > 422 for (chn = 0; chn < tot_channels; chn++) { 423 csr = mci->csrows[chn]; 424 if (csr) { > 425 for (chn = 0; chn < tot_channels; chn++) 426 kfree(csr->channels[chn]); 427 kfree(csr); 428 } > 429 kfree(mci->csrows[i]); 430 } 431 kfree(mci->csrows); 432 } and that code block seem to mess things up in several ways (double free, memory leak, out-of-bound reads etc.): L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be "row" and "tot_csrows" respectively. Which means either memory leak, or out-of-bound reads (which if does not trigger an immediate page fault error, will further lead to kfree() on random addresses). L425: The inner loop is reusing the same iterator "chn" as the outer loop, which could lead to premature end of the outer loop, and hence memory leak. L429: The array index 'i' in mci->csrows[i] is a temporary value used in previous loops, and won't change at all in the current loop. Which means either out-of-bound read and possibly kfree(random number), or the same mci->csrows[i] get freed once and again, and possibly double free for the kfree(csr) in L427. L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory. The buggy code was introduced by commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1 merge window. Fix it by freeing up resources in this order: free csrows[i]->channels[j] free csrows[i]->channels free csrows[i] free csrows CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2012, 21:45:26 UTC
7caf69f Linus Lüssing 18 September 2012, 01:01:08 UTC batman-adv: Fix symmetry check / route flapping in multi interface setups If receiving an OGM from a neighbor other than the currently selected and if it has the same TQ then we are supposed to switch if this neighbor provides a more symmetric link than the currently selected one. However this symmetry check currently is broken if the interface of the neighbor we received the OGM from and the one of the currently selected neighbor differ: We are currently trying to determine the symmetry of the link towards the selected router via the link we received the OGM from instead of just checking via the link towards the currently selected router. This leads to way more route switches than necessary and can lead to permanent route flapping in many common multi interface setups. This patch fixes this issue by using the right interface for this symmetry check. Signed-off-by: Linus Lüssing <linus.luessing@web.de> 23 September 2012, 21:12:49 UTC
40a3eb3 Def 20 September 2012, 12:56:13 UTC batman-adv: Fix change mac address of soft iface. Into function interface_set_mac_addr, the function tt_local_add was invoked before updating dev->dev_addr. The new MAC address was not tagged as NoPurge. Signed-off-by: Def <def@laposte.net> 23 September 2012, 21:12:48 UTC
5f0ecb9 Andreas Herrmann 23 September 2012, 18:27:32 UTC hwmon: (fam15h_power) Tweak runavg_range on resume The quirk introduced with commit 00250ec90963b7ef6678438888f3244985ecde14 (hwmon: fam15h_power: fix bogus values with current BIOSes) is not only required during driver load but also when system resumes from suspend. The BIOS might set the previously recommended (but unsuitable) initilization value for the running average range register during resume. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ 23 September 2012, 18:54:09 UTC
back to top