https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
ddffeb8 Linux 3.7-rc1 14 October 2012, 21:41:04 UTC
a5ef3f7 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ... 14 October 2012, 21:39:05 UTC
d25282d Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ... 14 October 2012, 20:39:34 UTC
b6eea87 x86, boot: Explicitly include autoconf.h for hostprogs The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590de22 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 October 2012, 19:41:28 UTC
7d380c8 perf: Fix UAPI fallout The UAPI commits forgot to test tooling builds such as tools/perf/, and this fixes the fallout. Manual conversion. Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 October 2012, 19:22:52 UTC
3d6ee36 Merge branch 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM update from Russell King: "This is the final round of stuff for ARM, left until the end of the merge window to reduce the number of conflicts. This set contains the ARM part of David Howells UAPI changes, and a fix to the ordering of 'select' statements in ARM Kconfig files (see the appropriate commit for why this happened - thanks to Andrew Morton for pointing out the problem.) I've left this as long as I dare for this window to avoid conflicts, and I regenerated the config patch yesterday, posting it to our mailing list for review and testing. I have several acks which include successful test reports for it. However, today I notice we've got new conflicts with previously unseen code... though that conflict should be trivial (it's my changes vs a one liner.)" * 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate arch/arm/include/asm Fix up fairly conflict in arch/arm/Kconfig (the select re-organization vs recent addition of GENERIC_KERNEL_EXECVE) 14 October 2012, 00:18:53 UTC
0b381a2 Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells: "The patches contained herein do the following: (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked this with Paul Mackerras before I created the patch and he suggested some extra bits to unexport. (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace applicable, and remove from the UAPI that part of linux/fs.h that was the reason for linux/blk_types.h being exported in the first place. I discussed this with Jens Axboe before creating the patch. (3) The big patch of the series to disintegrate include/linux/*.h as a unit. This could be split up, though there would be collisions in moving stuff between the two Kbuild files when the parts are merged as that file is sorted alphabetically rather than being grouped by subsystem. Of this set of headers, 17 files have changed in the UAPI exported region since the 4th and only 8 since the 9th so there isn't much change in this area - as one might expect. It should be pretty obvious and straightforward if it does come to fixing up: stuff in __KERNEL__ guards stays where it is and stuff outside moves to the same file in the include/uapi/linux/ directory. If a new file appears then things get a bit more complicated as the "headers +=" line has to move to include/uapi/linux/Kbuild. Only one new file has appeared since the 9th and I judge this type of event relatively unlikely. (4) A patch to disintegrate include/linux/byteorder/*.h as a unit. Signed-off-by: David Howells <dhowells@redhat.com>" * tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h 13 October 2012, 20:28:32 UTC
034b5ee Merge tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers Pull spi UAPI disintegration from David Howells: "This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>" * tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/spi 13 October 2012, 20:26:39 UTC
7c5a473 Merge tag 'openrisc-uapi' of git://openrisc.net/jonas/linux Pull OpenRISC uapi disintegration from Jonas Bonn: "OpenRISC UAPI disintegration work from David Howells" * tag 'openrisc-uapi' of git://openrisc.net/jonas/linux: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm 13 October 2012, 20:25:19 UTC
09a9ad6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids 13 October 2012, 20:23:39 UTC
9db9088 Merge tag 'md-3.7' of git://neil.brown.name/md Pull md updates from NeilBrown: - "discard" support, some dm-raid improvements and other assorted bits and pieces. * tag 'md-3.7' of git://neil.brown.name/md: (29 commits) md: refine reporting of resync/reshape delays. md/raid5: be careful not to resize_stripes too big. md: make sure manual changes to recovery checkpoint are saved. md/raid10: use correct limit variable md: writing to sync_action should clear the read-auto state. Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races md/raid5: make sure to_read and to_write never go negative. md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. md/raid5: protect debug message against NULL derefernce. md/raid5: add some missing locking in handle_failed_stripe. MD: raid5 avoid unnecessary zero page for trim MD: raid5 trim support md/bitmap:Don't use IS_ERR to judge alloc_page(). md/raid1: Don't release reference to device while handling read error. raid: replace list_for_each_continue_rcu with new interface add further __init annotations to crypto/xor.c DM RAID: Fix for "sync" directive ineffectiveness DM RAID: Fix comparison of index and quantity for "rebuild" parameter DM RAID: Add rebuild capability for RAID10 DM RAID: Move 'rebuild' checking code to its own function ... 13 October 2012, 20:22:01 UTC
244acb1 Merge branch 'config' into late-for-linus 13 October 2012, 16:14:17 UTC
93e2256 ARM: config: make sure that platforms are ordered by option string The large platform selection choice should be sorted by option string so it's easy to find the platform you're looking for. Fix the few options which are out of this order. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 October 2012, 16:13:43 UTC
b1b3f49 ARM: config: sort select statements alphanumerically As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 October 2012, 16:11:28 UTC
5921e6f UAPI: (Scripted) Disintegrate include/linux/byteorder Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> 13 October 2012, 09:46:49 UTC
607ca46 UAPI: (Scripted) Disintegrate include/linux Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> 13 October 2012, 09:46:48 UTC
08cce05 UAPI: Unexport linux/blk_types.h It seems that was linux/blk_types.h incorrectly exported to fix up some missing bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.). So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jens Axboe <jaxboe@fusionio.com> cc: Tejun Heo <tj@kernel.org> cc: Al Viro <viro@ZenIV.linux.org.uk> 13 October 2012, 09:45:06 UTC
8e4627d UAPI: Unexport part of linux/ppp-comp.h Unexport part of linux/ppp-comp.h as userspace can't make use of that bit. Signed-off-by: David Howells <dhowells@redhat.com> cc: Paul Mackerras <paulus@samba.org> cc: David Miller <davem@davemloft.net> 13 October 2012, 08:58:38 UTC
6257c57 Merge tag 'disintegrate-openrisc-20121009' of git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 * tag 'disintegrate-openrisc-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm 13 October 2012, 05:38:37 UTC
4d7127d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM bugfixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: Propagate error from tpm_transmit to fix a timeout hang driver/char/tpm: fix regression causesd by ppi 13 October 2012, 02:29:00 UTC
a3920a6 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Thermal updates from Len Brown: "The generic Linux thermal layer is gaining some new capabilities (generic cooling via cpufreq) and some new customers (ARM). Also, an ACPI EC bug fix plus a regression fix." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits) tools/power/acpi/acpidump: remove duplicated include from acpidump.c ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug cpuidle / ACPI: fix potential NULL pointer dereference ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop ACPI: EC: Make the GPE storm threshold a module parameter thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal() Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem. thermal: exynos: Use devm_* functions ARM: exynos: add thermal sensor driver platform data support thermal: exynos: register the tmu sensor with the kernel thermal layer thermal: exynos5: add exynos5250 thermal sensor driver support hwmon: exynos4: move thermal sensor driver to driver/thermal directory thermal: add generic cpufreq cooling implementation Fix a build error. thermal: Fix potential NULL pointer accesses thermal: add Renesas R-Car thermal sensor support thermal: fix potential out-of-bounds memory access Thermal: Introduce locking for cdev.thermal_instances list. Thermal: Unify the code for both active and passive cooling Thermal: Introduce simple arbitrator for setting device cooling state ... 13 October 2012, 02:27:59 UTC
18a022d Merge tag 'for-3.7' of git://openrisc.net/jonas/linux Pull OpenRISC updates from Jonas Bonn: "Fixups for some corner cases, build issues, and some obvious bugs in IRQ handling. No major changes." * tag 'for-3.7' of git://openrisc.net/jonas/linux: openrisc: mask interrupts in irq_mask_ack function openrisc: fix typos in comments and warnings openrisc: PIC should act on domain-local irqs openrisc: Make cpu_relax() invoke barrier() audit: define AUDIT_ARCH_OPENRISC openrisc: delay: fix handling of counter overflow openrisc: delay: fix loops calculation for __const_udelay 13 October 2012, 02:25:41 UTC
02a650e Merge tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers Pull UAPI disintegration for misc arches from David Howells: "UAPI disintegration for MN10300, FRV and AVR32 arches" * tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/mn10300/include/asm UAPI: (Scripted) Disintegrate arch/frv/include/asm UAPI: (Scripted) Disintegrate arch/avr32/include/asm 13 October 2012, 02:22:31 UTC
b689713 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc uapi disintegration from Benjamin Herrenschmidt. * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: UAPI: (Scripted) Disintegrate arch/powerpc/include/asm 13 October 2012, 02:21:15 UTC
b4fe19f Merge tag 'arm64-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 uapi disintegration from Catalin Marinas: "UAPI headers for arm64 together with some clean-up to make it possible: - Do not export the COMPAT_* definitions to user - Simplify the compat unistd32.h definitions and remove the __SYSCALL_COMPAT guard - Disintegrate the arch/arm64/include/asm/* headers" * tag 'arm64-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: UAPI: (Scripted) Disintegrate arch/arm64/include/asm arm64: Do not export the compat-specific definitions to the user arm64: Do not include asm/unistd32.h in asm/unistd.h arm64: Remove unused definitions from asm/unistd32.h 13 October 2012, 02:20:04 UTC
ff69497 Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming Pull C6X UAPI disintegration from Mark Salter: - scripted UAPI disintegration by David Howells. * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: UAPI: (Scripted) Disintegrate arch/c6x/include/asm 13 October 2012, 02:19:00 UTC
6c536a1 Merge tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "Cleanups - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c - Add module event hooks for simplified debugging with gdb Fixes - Fix kdb to stop paging with 'q' on bta and dmesg - Fix for data that scrolls off the vga console due to line wrapping when using the kdb pager New - The debug core registers for kernel module events which allows a kernel aware gdb to automatically load symbols and break on entry to a kernel module - Allow kgdboc=kdb to setup kdb on the vga console" * tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: tty/console: fix warnings in drivers/tty/serial/kgdboc.c kdb,vt_console: Fix missed data due to pager overruns kdb: Fix dmesg/bta scroll to quit with 'q' kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell kgdb,x86: fix warning about unused variable mips,kgdb: fix recursive page fault with CONFIG_KPROBES kgdb: Add module event hooks 13 October 2012, 02:16:58 UTC
ba8a3d6 Merge tag 'stable/for-linus-3.7-uapi-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen UAPI disintegration from Konrad Rzeszutek Wilk: "This has the UAPI disintegration work done by David Howells" * tag 'stable/for-linus-3.7-uapi-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: UAPI: (Scripted) Disintegrate include/xen 13 October 2012, 02:14:29 UTC
125aae1 Merge tag 'mmc-merge-for-3.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull two more mmc changes from Chris Ball: - Disintegrate UAPI - fix a mismerge that caused a build error. * tag 'mmc-merge-for-3.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: UAPI: (Scripted) Disintegrate include/linux/mmc mmc: mxs-mmc: Fix merge issue causing build error 13 October 2012, 02:07:40 UTC
79c63ee Merge tag 'dm-3.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper changes from Alasdair G Kergon: "Remove the power-of-2 block size constraint on discards in dm thin provisioning and factor the bio_prison code out into a separate module (for sharing with the forthcoming cache target). Use struct bio's front_pad to eliminate the use of one separate mempool by bio-based devices. A few other tiny clean-ups." * tag 'dm-3.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm: store dm_target_io in bio front_pad dm thin: move bio_prison code to separate module dm thin: prepare to separate bio_prison code dm thin: support discard with non power of two block size dm persistent data: convert to use le32_add_cpu dm: use ACCESS_ONCE for sysfs values dm bufio: use list_move dm mpath: fix check for null mpio in end_io fn 13 October 2012, 01:57:57 UTC
6a5a3d6 Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull misc SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for megaraid_sas, lpfc, bfi and mvumi. It also includes some fairly major fixes for virtio-scsi (scatterlist init), scsi_debug (off by one error), storvsc (use after free) and qla2xxx (potential deadlock). Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits) [SCSI] storvsc: Account for in-transit packets in the RESET path [SCSI] qla2xxx: fix potential deadlock on ha->hardware_lock [SCSI] scsi_debug: Fix off-by-one bug when unmapping region [SCSI] Shorten the path length of scsi_cmd_to_driver() [SCSI] virtio-scsi: support online resizing of disks [SCSI] virtio-scsi: fix LUNs greater than 255 [SCSI] virtio-scsi: initialize scatterlist structure [SCSI] megaraid_sas: Version, Changelog, Copyright update [SCSI] megaraid_sas: Remove duplicate code [SCSI] megaraid_sas: Add SystemPD FastPath support [SCSI] megaraid_sas: Add array boundary check for SystemPD [SCSI] megaraid_sas: Load io_request DataLength in bytes [SCSI] megaraid_sas: Add module param for configurable MSI-X vector count [SCSI] megaraid_sas: Remove un-needed completion_lock spinlock calls [SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver release [SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer when QoS not on [SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing performance issues [SCSI] lpfc 8.3.35: Fixed SCSI host create showing wrong link speed on SLI3 HBA ports [SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when verifying FCF record for use [SCSI] lpfc 8.3.35: Fixed messages for misconfigured port errors ... 13 October 2012, 01:57:01 UTC
8bbbfa7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: "2nd round of updates for the input subsystem. With it input core no longer limits number of character devices per event handler (such as evdev) to 32, but switches to dynamic minors once legacy range is exhausted. This should get multi-seat installations that currently run our of event devices very quickly. You will also get an update for Wacom driver and a couple of driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: extend the number of event (and other) devices Input: mousedev - mark mousedev interfaces as non-seekable Input: mousedev - rename mixdev_open to opened_by_mixdev Input: mousedev - reformat structure initializers Input: mousedev - factor out psaux code to reduce #ifdefery Input: samsung-keypad - add clk_prepare and clk_unprepare Input: atmel_mxt_ts - simplify mxt_dump_message Input: wacom - clean up wacom_query_tablet_data Input: wacom - introduce wacom_fix_phy_from_hid Input: wacom - allow any multi-input Intuos device to set prox Input: wacom - report correct touch contact size for I5/Bamboo 13 October 2012, 01:56:03 UTC
bd81cce Merge branch 'for-3.7' of git://linux-nfs.org/~bfields/linux Pull nfsd update from J Bruce Fields: "Another relatively quiet cycle. There was some progress on my remaining 4.1 todo's, but a couple of them were just of the form "check that we do X correctly", so didn't have much affect on the code. Other than that, a bunch of cleanup and some bugfixes (including an annoying NFSv4.0 state leak and a busy-loop in the server that could cause it to peg the CPU without making progress)." * 'for-3.7' of git://linux-nfs.org/~bfields/linux: (46 commits) UAPI: (Scripted) Disintegrate include/linux/sunrpc UAPI: (Scripted) Disintegrate include/linux/nfsd nfsd4: don't allow reclaims of expired clients nfsd4: remove redundant callback probe nfsd4: expire old client earlier nfsd4: separate session allocation and initialization nfsd4: clean up session allocation nfsd4: minor free_session cleanup nfsd4: new_conn_from_crses should only allocate nfsd4: separate connection allocation and initialization nfsd4: reject bad forechannel attrs earlier nfsd4: enforce per-client sessions/no-sessions distinction nfsd4: set cl_minorversion at create time nfsd4: don't pin clientids to pseudoflavors nfsd4: fix bind_conn_to_session xdr comment nfsd4: cast readlink() bug argument NFSD: pass null terminated buf to kstrtouint() nfsd: remove duplicate init in nfsd4_cb_recall nfsd4: eliminate redundant nfs4_free_stateid fs/nfsd/nfs4idmap.c: adjust inconsistent IS_ERR and PTR_ERR ... 13 October 2012, 01:53:54 UTC
98260da Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking updates from David Miller: 1) Alexey Kuznetsov noticed we routed TCP resets improperly in the assymetric routing case, fix this by reverting a change that made us use the incoming interface in the outgoing route key when we didn't have a socket context to work with. 2) TCP sysctl kernel memory leakage to userspace fix from Alan Cox. 3) Move UAPI bits from David Howells, WIMAX and CAN this time. 4) Fix TX stalls in e1000e wrt. Byte Queue Limits, from Hiroaki SHIMODA, Denys Fedoryshchenko, and Jesse Brandeburg. 5) Fix IPV6 crashes in packet generator module, from Amerigo Wang. 6) Tidies and fixes in the new VXLAN driver from Stephen Hemminger. 7) Bridge IP options parse doesn't check first if SKB header has at least an IP header's worth of content present. Fix from Sarveshwar Bandi. 8) The kernel now generates compound pages on transmit and the Xen netback drivers needs some adjustments in order to handle this. Fix from Ian Campbell. 9) Turn off ASPM in JME driver, from Kevin Bardon and Matthew Garrett. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mcs7830: Fix link state detection net: add doc for in4_pton() net: add doc for in6_pton() vti: fix sparse bit endian warnings tcp: resets are misrouted usbnet: Support devices reporting idleness Add CDC-ACM support for the CX93010-2x UCMxx USB Modem net/ethernet/jme: disable ASPM tcp: sysctl interface leaks 16 bytes of kernel memory kaweth: print correct debug ptr e1000e: Change wthresh to 1 to avoid possible Tx stalls ipv4: fix route mark sparse warning xen: netback: handle compound page fragments on transmit. bridge: Pull ip header into skb->data before looking into ip header. isdn: fix a wrapping bug in isdn_ppp_ioctl() vxlan: fix oops when give unknown ifindex vxlan: fix receive checksum handling vxlan: add additional headroom vxlan: allow configuring port range vxlan: associate with tunnel socket on transmit ... 13 October 2012, 01:51:48 UTC
e225ca2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull Sparc updates from David Miller: 1) Updated syscall tracing fix from Al Viro. 2) SUN4V error reporting was deficient in several areas. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: fix ptrace interaction with force_successful_syscall_return() sparc64: Fix deficiencies in sun4v error reporting. 13 October 2012, 01:47:41 UTC
54f7fc2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile arch update from Chris Metcalf: "The bulk of this change is the tile uapi disintegration. There is also a one-line change in here to enable interrupts in do_work_pending() to avoid a WARN_ON in _local_bh_enable_ip()." * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: enable interrupts in do_work_pending() UAPI: (Scripted) Disintegrate arch/tile/include/asm UAPI: (Scripted) Disintegrate arch/tile/include/arch 13 October 2012, 01:46:18 UTC
0c4a479 Merge tag 'please-pull-dhowells-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 UAPI changes from Tony Luck: "ia64 pieces of David Howells great UAPI include file move" * tag 'please-pull-dhowells-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: UAPI: (Scripted) Disintegrate arch/ia64/include/asm 13 October 2012, 01:38:34 UTC
ade0899 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "This tree includes some late late perf items that missed the first round: tools: - Bash auto completion improvements, now we can auto complete the tools long options, tracepoint event names, etc, from Namhyung Kim. - Look up thread using tid instead of pid in 'perf sched'. - Move global variables into a perf_kvm struct, from David Ahern. - Hists refactorings, preparatory for improved 'diff' command, from Jiri Olsa. - Hists refactorings, preparatory for event group viewieng work, from Namhyung Kim. - Remove double negation on optional feature macro definitions, from Namhyung Kim. - Remove several cases of needless global variables, on most builtins. - misc fixes kernel: - sysfs support for IBS on AMD CPUs, from Robert Richter. - Support for an upcoming Intel CPU, the Xeon-Phi / Knights Corner HPC blade PMU, from Vince Weaver. - misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) perf: Fix perf_cgroup_switch for sw-events perf: Clarify perf_cpu_context::active_pmu usage by renaming it to ::unique_pmu perf/AMD/IBS: Add sysfs support perf hists: Add more helpers for hist entry stat perf hists: Move he->stat.nr_events initialization to a template perf hists: Introduce struct he_stat perf diff: Removing the total_period argument from output code perf tool: Add hpp interface to enable/disable hpp column perf tools: Removing hists pair argument from output path perf hists: Separate overhead and baseline columns perf diff: Refactor diff displacement possition info perf hists: Add struct hists pointer to struct hist_entry perf tools: Complete tracepoint event names perf/x86: Add support for Intel Xeon-Phi Knights Corner PMU perf evlist: Remove some unused methods perf evlist: Introduce add_newtp method perf kvm: Move global variables into a perf_kvm struct perf tools: Convert to BACKTRACE_SUPPORT perf tools: Long option completion support for each subcommands perf tools: Complete long option names of perf command ... 13 October 2012, 01:20:11 UTC
871a059 perf: Handle new rbtree implementation Perf build fails with the new rbtree implementation: ../../lib/rbtree.c:24:36: fatal error: linux/rbtree_augmented.h: No such file or directory compilation terminated. Fix by updating the Makefile and adding a btree_augmented.h wrapper. Reported-and-tested-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Borislav Petkov <bp@amd64.org> Link: http://lkml.kernel.org/r/20121009180156.GA245@x4 Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 October 2012, 01:12:09 UTC
4e21fc1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of kernel_execve() patches from Al Viro: "The last bits of infrastructure for kernel_thread() et.al., with alpha/arm/x86 use of those. Plus sanitizing the asm glue and do_notify_resume() on alpha, fixing the "disabled irq while running task_work stuff" breakage there. At that point the rest of kernel_thread/kernel_execve/sys_execve work can be done independently for different architectures. The only pending bits that do depend on having all architectures converted are restrictred to fs/* and kernel/* - that'll obviously have to wait for the next cycle. I thought we'd have to wait for all of them done before we start eliminating the longjump-style insanity in kernel_execve(), but it turned out there's a very simple way to do that without flagday-style changes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: alpha: switch to saner kernel_execve() semantics arm: switch to saner kernel_execve() semantics x86, um: convert to saner kernel_execve() semantics infrastructure for saner ret_from_kernel_thread semantics make sure that kernel_thread() callbacks call do_exit() themselves make sure that we always have a return path from kernel_execve() ppc: eeh_event should just use kthread_run() don't bother with kernel_thread/kernel_execve for launching linuxrc alpha: get rid of switch_stack argument of do_work_pending() alpha: don't bother passing switch_stack separately from regs alpha: take SIGPENDING/NOTIFY_RESUME loop into signal.c alpha: simplify TIF_NEED_RESCHED handling 13 October 2012, 01:05:52 UTC
8418263 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull third pile of VFS updates from Al Viro: "Stuff from Jeff Layton, mostly. Sanitizing interplay between audit and namei, removing a lot of insanity from audit_inode() mess and getting things ready for his ESTALE patchset." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it vfs: unexport getname and putname symbols acct: constify the name arg to acct_on vfs: allocate page instead of names_cache buffer in mount_block_root audit: overhaul __audit_inode_child to accomodate retrying audit: optimize audit_compare_dname_path audit: make audit_compare_dname_path use parent_len helper audit: remove dirlen argument to audit_compare_dname_path audit: set the name_len in audit_inode for parent lookups audit: add a new "type" field to audit_names struct audit: reverse arguments to audit_inode_child audit: no need to walk list in audit_inode if name is NULL audit: pass in dentry to audit_copy_inode wherever possible audit: remove unnecessary NULL ptr checks from do_path_lookup 13 October 2012, 01:04:42 UTC
f81700b procfs: don't need a PATH_MAX allocation to hold a string representation of an int Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:15:10 UTC
7950e38 vfs: embed struct filename inside of names_cache allocation if possible In the common case where a name is much smaller than PATH_MAX, an extra allocation for struct filename is unnecessary. Before allocating a separate one, try to embed the struct filename inside the buffer first. If it turns out that that's not long enough, then fall back to allocating a separate struct filename and redoing the copy. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:15:10 UTC
adb5c24 audit: make audit_inode take struct filename Keep a pointer to the audit_names "slot" in struct filename. Have all of the audit_inode callers pass a struct filename ponter to audit_inode instead of a string pointer. If the aname field is already populated, then we can skip walking the list altogether and just use it directly. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:15:09 UTC
669abf4 vfs: make path_openat take a struct filename pointer ...and fix up the callers. For do_file_open_root, just declare a struct filename on the stack and fill out the .name field. For do_filp_open, make it also take a struct filename pointer, and fix up its callers to call it appropriately. For filp_open, add a variant that takes a struct filename pointer and turn filp_open into a wrapper around it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:15:09 UTC
873f1ee vfs: turn do_path_lookup into wrapper around struct filename variant ...and make the user_path callers use that variant instead. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:15:08 UTC
7ac8626 audit: allow audit code to satisfy getname requests from its names_list Currently, if we call getname() on a userland string more than once, we'll get multiple copies of the string and multiple audit_names records. Add a function that will allow the audit_names code to satisfy getname requests using info from the audit_names list, avoiding a new allocation and audit_names records. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:15:08 UTC
91a27b2 vfs: define struct filename and have getname() return it getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 13 October 2012, 00:14:55 UTC
e9069f4 btrfs: Fix compilation with user namespace support enabled When compiling with user namespace support btrfs fails like: fs/btrfs/tree-log.c: In function ‘fill_inode_item’: fs/btrfs/tree-log.c:2955:2: error: incompatible type for argument 3 of ‘btrfs_set_inode_uid’ fs/btrfs/ctree.h:2026:1: note: expected ‘u32’ but argument is of type ‘kuid_t’ fs/btrfs/tree-log.c:2956:2: error: incompatible type for argument 3 of ‘btrfs_set_inode_gid’ fs/btrfs/ctree.h:2027:1: note: expected ‘u32’ but argument is of type ‘kgid_t’ Fix this by using i_uid_read and i_gid_read in Cc: Chris Mason <chris.mason@fusionio.com> Cc: Josef Bacik <jbacik@fusionio.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 12 October 2012, 22:01:42 UTC
ea1fd77 userns: Fix posix_acl_file_xattr_userns gid conversion The code needs to be from_kgid(make_kgid(...)...) not from_kuid(make_kgid(...)...). Doh! Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 12 October 2012, 20:16:48 UTC
1bbb309 userns: Properly print bluetooth socket uids With user namespace support enabled building bluetooth generated the warning. net/bluetooth/af_bluetooth.c: In function ‘bt_seq_show’: net/bluetooth/af_bluetooth.c:598:7: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 7 has type ‘kuid_t’ [-Wformat] Convert sock_i_uid from a kuid_t to a uid_t before printing, to avoid this problem. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 12 October 2012, 20:16:47 UTC
dba1416 dm: store dm_target_io in bio front_pad Use the recently-added bio front_pad field to allocate struct dm_target_io. Prior to this patch, dm_target_io was allocated from a mempool. For each dm_target_io, there is exactly one bio allocated from a bioset. This patch merges these two allocations into one allocation: we create a bioset with front_pad equal to the size of dm_target_io so that every bio allocated from the bioset has sizeof(struct dm_target_io) bytes before it. We allocate a bio and use the bytes before the bio as dm_target_io. _tio_cache is removed and the tio_pool mempool is now only used for request-based devices. This idea was introduced by Kent Overstreet. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: tj@kernel.org Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Bill Pemberton <wfp5p@viridian.itc.virginia.edu> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 20:02:15 UTC
4f81a41 dm thin: move bio_prison code to separate module The bio prison code will be useful to other future DM targets so move it to a separate module. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 20:02:13 UTC
44feb38 dm thin: prepare to separate bio_prison code The bio prison code will be useful to share with future DM targets. Prepare to move this code into a separate module, adding a dm prefix to structures and functions that will be exported. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 20:02:10 UTC
28eed34 dm thin: support discard with non power of two block size Support discards when the pool's block size is not a power of 2. The block layer assumes discard_granularity is a power of 2 (in blkdev_issue_discard), so we set this to the largest power of 2 that is a divides into the number of sectors in each block, but never less than DATA_DEV_BLOCK_SIZE_MIN_SECTORS. This patch eliminates the "Discard support must be disabled when the block size is not a power of 2" constraint that was imposed in commit 55f2b8b ("dm thin: support for non power of 2 pool blocksize"). That commit was incomplete: using a block size that is not a power of 2 shouldn't mean disabling discard support on the device completely. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 20:02:07 UTC
c19c6c9 arch/tile: enable interrupts in do_work_pending() All the called functions expect interrupts to be enabled, and now one of them has started to warn about it, so make it correct. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> 12 October 2012, 19:38:54 UTC
d20f2f8 Merge tag 'tags/disintegrate-tile-20121009' into for-linus UAPI Disintegration 2012-10-09 12 October 2012, 19:11:08 UTC
dabdaf0 mcs7830: Fix link state detection The device had an undocumented "feature": it can provide a sequence of spurious link-down status data even if the link is up all the time. A sequence of 10 was seen so update the link state only after the device reports the same link state 20 times. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reported-by: Michael Leun <lkml20120218@newton.leun.net> Tested-by: Michael Leun <lkml20120218@newton.leun.net> Signed-off-by: David S. Miller <davem@davemloft.net> 12 October 2012, 17:56:52 UTC
93ac0ef net: add doc for in4_pton() It is not easy to use in4_pton() correctly without reading its definition, so add some doc for it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 October 2012, 17:56:52 UTC
28194fc net: add doc for in6_pton() It is not easy to use in6_pton() correctly without reading its definition, so add some doc for it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 October 2012, 17:56:52 UTC
8437e76 vti: fix sparse bit endian warnings Use be32_to_cpu instead of htonl to keep sparse happy. Signed-off-by: Stephen Hemminger <shemminger@vyatta.org> Signed-off-by: David S. Miller <davem@davemloft.net> 12 October 2012, 17:56:52 UTC
4c67525 tcp: resets are misrouted After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> 12 October 2012, 17:52:40 UTC
5522be6 alpha: switch to saner kernel_execve() semantics Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 17:35:23 UTC
9fff2fa arm: switch to saner kernel_execve() semantics Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 17:35:23 UTC
22e2430 x86, um: convert to saner kernel_execve() semantics Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 17:35:22 UTC
a74fb73 infrastructure for saner ret_from_kernel_thread semantics * allow kernel_execve() leave the actual return to userland to caller (selected by CONFIG_GENERIC_KERNEL_EXECVE). Callers updated accordingly. * architecture that does select GENERIC_KERNEL_EXECVE in its Kconfig should have its ret_from_kernel_thread() do this: call schedule_tail call the callback left for it by copy_thread(); if it ever returns, that's because it has just done successful kernel_execve() jump to return from syscall IOW, its only difference from ret_from_fork() is that it does call the callback. * such an architecture should also get rid of ret_from_kernel_execve() and __ARCH_WANT_KERNEL_EXECVE This is the last part of infrastructure patches in that area - from that point on work on different architectures can live independently. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 17:35:07 UTC
0bcf087 dm persistent data: convert to use le32_add_cpu Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 15:59:47 UTC
fe5fe90 dm: use ACCESS_ONCE for sysfs values Use the ACCESS_ONCE macro in dm-bufio and dm-verity where a variable can be modified asynchronously (through sysfs) and we want to prevent compiler optimizations that assume that the variable hasn't changed. (See Documentation/atomic_ops.txt.) Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 15:59:46 UTC
54499af dm bufio: use list_move Use list_move() instead of list_del() + list_add(). spatch with a semantic match was used to find this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 15:59:44 UTC
a71a261 dm mpath: fix check for null mpio in end_io fn The mpio dereference should be moved below the BUG_ON NULL test in multipath_end_io(). spatch with a semantic match was used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 12 October 2012, 15:59:42 UTC
ccff9b1 Merge tag 'stable/for-linus-3.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "This has four bug-fixes and one tiny feature that I forgot to put initially in my tree due to oversight. The feature is for kdump kernels to speed up the /proc/vmcore reading. There is a ram_is_pfn helper function that the different platforms can register for. We are now doing that. The bug-fixes cover some embarrassing struct pv_cpu_ops variables being set to NULL on Xen (but not baremetal). We had a similar issue in the past with {write|read}_msr_safe and this fills the three missing ones. The other bug-fix is to make the console output (hvc) be capable of dealing with misbehaving backends and not fall flat on its face. Lastly, a quirk for older XenBus implementations that came with an ancient v3.4 hypervisor (so RHEL5 based) - reading of certain non-existent attributes just hangs the guest during bootup - so we take precaution of not doing that on such older installations. Feature: - Register a pfn_is_ram helper to speed up reading of /proc/vmcore. Bug-fixes: - Three pvops call for Xen were undefined causing BUG_ONs. - Add a quirk so that the shutdown watches (used by kdump) are not used with older Xen (3.4). - Fix ungraceful state transition for the HVC console." * tag 'stable/for-linus-3.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches. xen/bootup: allow {read|write}_cr8 pvops call. xen/bootup: allow read_tscp call for Xen PV guests. xen pv-on-hvm: add pfn_is_ram helper for kdump xen/hvc: handle backend CLOSED without CLOSING 12 October 2012, 13:20:28 UTC
3dc329b Merge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull SLAB fix from Pekka Enberg: "This contains a lockdep false positive fix from Jiri Kosina I missed from the previous pull request." * 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm, slab: release slab_mutex earlier in kmem_cache_destroy() 12 October 2012, 13:19:28 UTC
03d3602 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core update from Thomas Gleixner: - Bug fixes (one for a longstanding dead loop issue) - Rework of time related vsyscalls - Alarm timer updates - Jiffies updates to remove compile time dependencies * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Cast raw_interval to u64 to avoid shift overflow timers: Fix endless looping between cascade() and internal_add_timer() time/jiffies: bring back unconditional LATCH definition time: Convert x86_64 to using new update_vsyscall time: Only do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD systems time: Introduce new GENERIC_TIME_VSYSCALL time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Move update_vsyscall definitions to timekeeper_internal.h time: Move timekeeper structure to timekeeper_internal.h for vsyscall changes jiffies: Remove compile time assumptions about CLOCK_TICK_RATE jiffies: Kill unused TICK_USEC_TO_NSEC alarmtimer: Rename alarmtimer_remove to alarmtimer_dequeue alarmtimer: Remove unused helpers & defines alarmtimer: Use hrtimer per-alarm instead of per-base alarmtimer: Implement minimum alarm interval for allowing suspend 12 October 2012, 13:17:48 UTC
0588f1f Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A CPU hotplug related crash fix and a nohz accounting fixlet." * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Update sched_domains_numa_masks[][] when new cpus are onlined sched: Ensure 'sched_domains_numa_levels' is safe to use in other functions nohz: Fix one jiffy count too far in idle cputime 12 October 2012, 13:13:05 UTC
9d55ab7 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fixes from Ingo Molnar: "This tree includes a shutdown/cpu-hotplug deadlock fix and a documentation fix." * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Advise most users not to enable RCU user mode rcu: Grace-period initialization excludes only RCU notifier 12 October 2012, 13:12:07 UTC
cb6b6df xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches. The commit 254d1a3f02ebc10ccc6e4903394d8d3f484f715e, titled "xen/pv-on-hvm kexec: shutdown watches from old kernel" assumes that the XenBus backend can deal with reading of values from: "control/platform-feature-xs_reset_watches": ... a patch for xenstored is required so that it accepts the XS_RESET_WATCHES request from a client (see changeset 23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored the registration of watches will fail and some features of a PVonHVM guest are not available. The guest is still able to boot, but repeated kexec boots will fail." Sadly this is not true when using a Xen 3.4 hypervisor and booting a PVHVM guest. We end up hanging at: err = xenbus_scanf(XBT_NIL, "control", "platform-feature-xs_reset_watches", "%d", &supported); This can easily be seen with guests hanging at xenbus_init: NX (Execute Disable) protection: active SMBIOS 2.4 present. DMI: Xen HVM domU, BIOS 3.4.0 05/13/2011 Hypervisor detected: Xen HVM Xen version 3.4. Xen Platform PCI: I/O protocol version 1 ... snip .. calling xenbus_init+0x0/0x27e @ 1 Reverting the commit or using the attached patch fixes the issue. This fix checks whether the hypervisor is older than 4.0 and if so does not try to perform the read. Fixes-Oracle-Bug: 14708233 CC: stable@vger.kernel.org Acked-by: Olaf Hering <olaf@aepfle.de> [v2: Added a comment in the source code] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 12 October 2012, 12:49:21 UTC
1a7bbda xen/bootup: allow {read|write}_cr8 pvops call. We actually do not do anything about it. Just return a default value of zero and if the kernel tries to write anything but 0 we BUG_ON. This fixes the case when an user tries to suspend the machine and it blows up in save_processor_state b/c 'read_cr8' is set to NULL and we get: kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100! invalid opcode: 0000 [#1] SMP Pid: 2687, comm: init.late Tainted: G O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs RIP: e030:[<ffffffff814d5f42>] [<ffffffff814d5f42>] save_processor_state+0x212/0x270 .. snip.. Call Trace: [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5 CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 12 October 2012, 12:49:06 UTC
cd0608e xen/bootup: allow read_tscp call for Xen PV guests. The hypervisor will trap it. However without this patch, we would crash as the .read_tscp is set to NULL. This patch fixes it and sets it to the native_read_tscp call. CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 12 October 2012, 12:48:58 UTC
cb8db5d UAPI: (Scripted) Disintegrate arch/arm/include/asm Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> 12 October 2012, 12:05:52 UTC
f2f0945 tty/console: fix warnings in drivers/tty/serial/kgdboc.c The con_debug_leave/con_debug_enter functions are stubbed out by defining them to (0), which causes harmless build warnings. Using proper inline functions is the normal way to deal with this. Without this patch, building the ARM bcm2835_defconfig results in: drivers/tty/serial/kgdboc.c: In function 'kgdboc_pre_exp_handler': drivers/tty/serial/kgdboc.c:279:3: warning: statement with no effect [-Wunused-value] drivers/tty/serial/kgdboc.c: In function 'kgdboc_post_exp_handler': drivers/tty/serial/kgdboc.c:293:3: warning: statement with no effect [-Wunused-value] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:36 UTC
17b572e kdb,vt_console: Fix missed data due to pager overruns It is possible to miss data when using the kdb pager. The kdb pager does not pay attention to the maximum column constraint of the screen or serial terminal. This result is not incrementing the shown lines correctly and the pager will print more lines that fit on the screen. Obviously that is less than useful when using a VGA console where you cannot scroll back. The pager will now look at the kdb_buffer string to see how many characters are printed. It might not be perfect considering you can output ASCII that might move the cursor position, but it is a substantially better approximation for viewing dmesg and trace logs. This also means that the vt screen needs to set the kdb COLUMNS variable. Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:35 UTC
d1871b3 kdb: Fix dmesg/bta scroll to quit with 'q' If you press 'q' the pager should exit instead of printing everything from dmesg which can really bog down a 9600 baud serial link. The same is true for the bta command. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:35 UTC
24b8592 kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell It is a common enough mistake for people to specify "kdb" when they meant to type "kbd" that the kgdboc can just accept both since they both mean the same thing anyway. Specifically it is for the case where you want kdb to be active on your graphics console + keyboard (where kbd was the original abbreviation for keyboard). With this change kgdboc will now accept either to mean the same thing: kgdboc=kbd kgdboc=kdb Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:34 UTC
42c1221 kgdb,x86: fix warning about unused variable When compiling without CONFIG_DEBUG_RODATA the following compiler warning is generated: arch/x86/kernel/kgdb.c: In function 'kgdb_arch_set_breakpoint': arch/x86/kernel/kgdb.c:749: warning: unused variable 'opc' The variable instantiation needs to be inside the #ifdef to make the warning go away. Reported-by: Thiago Rafael Becker <trbecker@trbecker.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:34 UTC
f0a996e mips,kgdb: fix recursive page fault with CONFIG_KPROBES This fault was detected using the kgdb test suite on boot and it crashes recursively due to the fact that CONFIG_KPROBES on mips adds an extra die notifier in the page fault handler. The crash signature looks like this: kgdbts:RUN bad memory access test KGDB: re-enter exception: ALL breakpoints killed Call Trace: [<807b7548>] dump_stack+0x20/0x54 [<807b7548>] dump_stack+0x20/0x54 The fix for now is to have kgdb return immediately if the fault type is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed to happen. Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:34 UTC
f30fed1 kgdb: Add module event hooks Allow gdb to auto load kernel modules when it is attached, which makes it trivially easy to debug module init functions or pre-set breakpoints in a kernel module that has not loaded yet. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 12 October 2012, 11:37:33 UTC
c1f8d90 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU fixes from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 October 2012, 07:39:08 UTC
8e377d1 vfs: unexport getname and putname symbols I see no callers in module code. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:09 UTC
cfd4da1 acct: constify the name arg to acct_on Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:03 UTC
a608ca2 vfs: allocate page instead of names_cache buffer in mount_block_root First, it's incorrect to call putname() after __getname_gfp() since the bare __getname_gfp() call skips the auditing code, while putname() doesn't. mount_block_root allocates a PATH_MAX buffer via __getname_gfp, and then calls get_fs_names to fill the buffer. That function can call get_filesystem_list which assumes that that buffer is a full page in size. On arches where PAGE_SIZE != 4k, then this could potentially overrun. In practice, it's hard to imagine the list of filesystem names even approaching 4k, but it's best to be safe. Just allocate a page for this purpose instead. With this, we can also remove the __getname_gfp() definition since there are no more callers. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:03 UTC
4fa6b5e audit: overhaul __audit_inode_child to accomodate retrying In order to accomodate retrying path-based syscalls, we need to add a new "type" argument to audit_inode_child. This will tell us whether we're looking for a child entry that represents a create or a delete. If we find a parent, don't automatically assume that we need to create a new entry. Instead, use the information we have to try to find an existing entry first. Update it if one is found and create a new one if not. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:03 UTC
e3d6b07 audit: optimize audit_compare_dname_path In the cases where we already know the length of the parent, pass it as a parm so we don't need to recompute it. In the cases where we don't know the length, pass in AUDIT_NAME_FULL (-1) to indicate that it should be determined. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:02 UTC
29e9a34 audit: make audit_compare_dname_path use parent_len helper Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:02 UTC
563a0d1 audit: remove dirlen argument to audit_compare_dname_path All the callers set this to NULL now. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:01 UTC
bfcec70 audit: set the name_len in audit_inode for parent lookups Currently, this gets set mostly by happenstance when we call into audit_inode_child. While that might be a little more efficient, it seems wrong. If the syscall ends up failing before audit_inode_child ever gets called, then you'll have an audit_names record that shows the full path but has the parent inode info attached. Fix this by passing in a parent flag when we call audit_inode that gets set to the value of LOOKUP_PARENT. We can then fix up the pathname for the audit entry correctly from the get-go. While we're at it, clean up the no-op macro for audit_inode in the !CONFIG_AUDITSYSCALL case. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:01 UTC
78e2e80 audit: add a new "type" field to audit_names struct For now, we just have two possibilities: UNKNOWN: for a new audit_names record that we don't know anything about yet NORMAL: for everything else In later patches, we'll add other types so we can distinguish and update records created under different circumstances. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:00 UTC
c43a25a audit: reverse arguments to audit_inode_child Most of the callers get called with an inode and dentry in the reverse order. The compiler then has to reshuffle the arg registers and/or stack in order to pass them on to audit_inode_child. Reverse those arguments for a micro-optimization. Reported-by: Eric Paris <eparis@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:32:00 UTC
9cec9d6 audit: no need to walk list in audit_inode if name is NULL If name is NULL then the condition in the loop will never be true. Also, with this change, we can eliminate the check for n->name == NULL since the equivalence check will never be true if it is. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:31:59 UTC
1c2e51e audit: pass in dentry to audit_copy_inode wherever possible In some cases, we were passing in NULL even when we have a dentry. Reported-by: Eric Paris <eparis@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:31:59 UTC
f78570d audit: remove unnecessary NULL ptr checks from do_path_lookup As best I can tell, whenever retval == 0, nd->path.dentry and nd->inode are also non-NULL. Eliminate those checks and the superfluous audit_context check. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 12 October 2012, 04:31:59 UTC
back to top