https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
f22e6e8 Linux 4.0-rc7 06 April 2015, 22:39:45 UTC
442bb4b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets 06 April 2015, 22:19:59 UTC
fde913e net/mlx4_core: Fix error message deprecation for ConnectX-2 cards Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") did the deprecation only for port 1 of the card. Need to deprecate for port 2 as well. Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2015, 21:32:27 UTC
3030381 net: dsa: fix filling routing table from OF description According to description in 'include/net/dsa.h', in cascade switches configurations where there are more than one interconnected devices, 'rtable' array in 'dsa_chip_data' structure is used to indicate which port on this switch should be used to send packets to that are destined for corresponding switch. However, dsa_of_setup_routing_table() fills 'rtable' with port numbers of the _target_ switch, but not current one. This commit removes redundant devicetree parsing and adds needed port number as a function argument. So dsa_of_setup_routing_table() now just looks for target switch number by parsing parent of 'link' device node. To remove possible misunderstandings with the way of determining target switch number, a corresponding comment was added to the source code and to the DSA device tree bindings documentation file. This was tested on a custom board with two Marvell 88E6095 switches with following corresponding routing tables: { -1, 10 } and { 8, -1 }. Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2015, 21:31:37 UTC
9e44163 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem - two more tweaks for ALPS driver to work out kinks after splitting the touchpad, trackstick, and potential external PS/2 mouse into separate input devices. Changes to support ALPS SS4 devices (protocol V8) will be coming in 4.1..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - document stick behavior for protocol V2 Input: alps - report V2 Dualpoint Stick events via the right evdev node Input: alps - report interleaved bare PS/2 packets via dev3 06 April 2015, 21:10:08 UTC
67e04c2 l2tp: unregister l2tp_net_ops on failure path Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2015, 20:53:02 UTC
ecf7b36 mvneta: dont call mvneta_adjust_link() manually mvneta_adjust_link() is a callback for of_phy_connect() and should not be called directly. The result of calling it directly is as below: Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2015, 20:35:40 UTC
f60e599 ipv6: protect skb->sk accesses from recursive dereference inside the stack We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2015, 20:12:49 UTC
58d8a3b Input: alps - document stick behavior for protocol V2 Document that protocol V2 uses standard (bare) PS/2 mouse packets for the DualPoint stick. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 05 April 2015, 18:48:35 UTC
e3a7921 Input: alps - report V2 Dualpoint Stick events via the right evdev node On V2 devices the DualPoint Stick reports bare packets, these should be reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also has the INPUT_PROP_POINTING_STICK propbit set. Note that since there is no way to distinguish these packets from an external PS/2 mouse (insofar as these laptops have an external PS/2 port) this means that we will be reporting PS/2 mouse events via this evdev node too, as we've been doing in kernel 3.19 and older. This has been tested on a Dell Latitude D620 and a Dell Latitude E6400, which both have a V2 touchpad + a DualPoint Stick which reports bare packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 05 April 2015, 18:48:35 UTC
59c30af Input: alps - report interleaved bare PS/2 packets via dev3 Bare packets should be reported via the same evdev device independent on whether they are detected on the beginning of a packet or in the middle of a packet. This has been tested on a Dell Latitude E6400, where the DualPoint Stick reports bare packets, which get reported via dev3 when the touchpad is idle, and via dev2 when the touchpad and stick are used simultaneously. This commit fixes this inconsistency by always reporting bare packets via dev3. Note that since the come from a DualPoint Stick they really should be reported via dev2, this gets fixed in a later commit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 05 April 2015, 18:48:34 UTC
f8b3d8a Merge tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes and new device ids for 4.0-rc6. Nothing major, some xhci fixes for reported problems, and some usb-serial device ids. All have been in linux-next for a while" * tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: ftdi_sio: Use jtag quirk for SNAP Connect E10 usb: isp1760: fix spin unlock in the error path of isp1760_udc_start usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers usb: xhci: handle Config Error Change (CEC) in xhci driver USB: keyspan_pda: add new device id USB: ftdi_sio: Added custom PID for Synapse Wireless product 04 April 2015, 19:26:28 UTC
8eb6dcf Merge tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some staging driver fixes, well, really all just IIO driver fixes, for 4.0-rc6. They fix issues that have been reported with these drivers. All of these patches have been in linux-next for a while" * tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: Use iio_trigger_get for indio_dev->trig assignment iio: adc: vf610: use ADC clock within specification iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build iio: core: Fix double free. iio:inv-mpu6050: Fix inconsistency for the scale channel staging: iio: dummy: Fix undefined symbol build error iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo staging: iio: hmc5843: Set iio name property in sysfs iio: bmc150: change sampling frequency iio: fix drivers that check buffer->scan_mask 04 April 2015, 19:22:31 UTC
eca8258 Merge tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are 3 serial driver fixes for 4.0-rc6. They fix some reported issues with the samsung and fsl_lpuart drivers. All have been in linux-next for a while" * tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: fsl_lpuart: clear receive flag on FIFO flush tty: serial: fsl_lpuart: specify transmit FIFO size serial: samsung: Clear operation mode on UART shutdown 04 April 2015, 19:11:57 UTC
1cced50 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A fix for ALPS driver for issue introduced in the latest update and a tweak for yet another Lenovo box in Synaptics. There will be more ALPS tweaks coming.." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define INPUT_PROP_ACCELEROMETER behavior Input: synaptics - fix min-max quirk value for E440 Input: synaptics - add quirk for Thinkpad E440 Input: ALPS - fix max coordinates for v5 and v7 protocols Input: add MT_TOOL_PALM 03 April 2015, 21:58:48 UTC
57a9d89 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block layer fix from Jens Axboe: "Just one patch in this pull request, fixing a regression caused by a 'mathematically correct' change to lcm()" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix blk_stack_limits() regression due to lcm() change 03 April 2015, 21:49:26 UTC
567cfea Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization fix, a reboot quirk and a kgdb fixlet" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kgdb/x86: Fix reporting of 'si' in kgdb on x86_64 x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk MAINTAINERS: Change the x86 microcode loader maintainer firmware: dmi_scan: Prevent dmi_num integer overflow 03 April 2015, 17:42:32 UTC
ec2e76b Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two x86 Intel PMU constraint handling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints perf/x86/intel: Filter branches for PEBS event 03 April 2015, 17:38:36 UTC
ccc20a3 Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree fix from Grant Likely: "Simple bugfix for bad device tree data on the PA-Semi platform" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: drivers/of: Add empty ranges quirk for PA-Semi 03 April 2015, 17:15:19 UTC
b010a0f Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull CIFS fixes from Steve French: "A set of small cifs fixes fixing a memory leak, kernel oops, and infinite loop (and some spotted by Coverity)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: Fix warning Fix another dereference before null check warning CIFS: session servername can't be null Fix warning on impossible comparison Fix coverity warning Fix dereference before null check warning Don't ignore errors on encrypting password in SMBTcon Fix warning on uninitialized buftype cifs: potential memory leaks when parsing mnt opts cifs: fix use-after-free bug in find_writable_file cifs: smb2_clone_range() - exit on unhandled error 03 April 2015, 16:54:36 UTC
576b7cd netns: don't allocate an id for dead netns First, let's explain the problem. Suppose you have an ipip interface that stands in the netns foo and its link part in the netns bar (so the netns bar has an nsid into the netns foo). Now, you remove the netns bar: - the bar nsid into the netns foo is removed - the netns exit method of ipip is called, thus our ipip iface is removed: => a netlink message is built in the netns foo to advertise this deletion => this netlink message requests an nsid for bar, thus a new nsid is allocated for bar and never removed. This patch adds a check in peernet2id() so that an id cannot be allocated for a netns which is currently destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 April 2015, 16:36:31 UTC
6d458f5 Revert "netns: don't clear nsid too early on removal" This reverts commit 4217291e592d ("netns: don't clear nsid too early on removal"). This is not the right fix, it introduces races. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 April 2015, 16:36:31 UTC
7ba0c47 ip6mr: call del_timer_sync() in ip6mr_free_table() We need to wait for the flying timers, since we are going to free the mrtable right after it. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 April 2015, 00:52:35 UTC
419df12 net: move fib_rules_unregister() under rtnl lock We have to hold rtnl lock for fib_rules_unregister() otherwise the following race could happen: fib_rules_unregister(): fib_nl_delrule(): ... ... ... ops = lookup_rules_ops(); list_del_rcu(&ops->list); list_for_each_entry(ops->rules) { fib_rules_cleanup_ops(ops); ... list_del_rcu(); list_del_rcu(); } Note, net->rules_mod_lock is actually not needed at all, either upper layer netns code or rtnl lock guarantees we are safe. Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 April 2015, 00:52:34 UTC
ed78530 ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup This is the IPv4 part for commit 905a6f96a1b1 (ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanup). Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 April 2015, 00:52:34 UTC
8f778bb Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "One drm core fix, one exynos regression fix, two sets of radeon fixes (Alex was a bit behind last week), and two i915 fixes. Nothing too serious we seem to have calmed down i915 since last week" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix wait in radeon_mn_invalidate_range_start drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr drm: Exynos: Respect framebuffer pitch for FIMD/Mixer drm/i915: Reject the colorkey ioctls for primary and cursor planes drm/i915: Skip allocating shadow batch for 0-length batches drm/radeon: programm the VCE fw BAR as well drm/radeon: always dump the ring content if it's available radeon: Do not directly dereference pointers to BIOS area. drm/radeon/dpm: fix 120hz handling harder drm/edid: set ELD for firmware and debugfs override EDIDs 03 April 2015, 00:18:57 UTC
4e8a483 Merge tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux Pull irqchip fixes from Jason Cooper: "This is the second round of fixes for irqchip. It contains some fixes found while the arm64 guys were writing the kvm gicv3 its emulation. GICv3 ITS: - Small batch of fixes discovered while writing the kvm ITS emulation" * tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Use non-cacheable accesses when no shareability irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusion irqchip: gicv3-its: Fix device ID encoding irqchip: gicv3-its: Fix encoding of collection's target redistributor 02 April 2015, 23:37:56 UTC
51b52fa Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Just two small fixes for radeon, both destined for stable. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix wait in radeon_mn_invalidate_range_start drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr 02 April 2015, 23:28:55 UTC
165b11b Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fix display on issue to Exynos5250 based Snow(1366x768) board. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: Exynos: Respect framebuffer pitch for FIMD/Mixer 02 April 2015, 23:28:18 UTC
3fa50dc Merge tag 'drm-intel-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel into drm-fixes one oops fixes and a 0-length allocation fix from next backported. * tag 'drm-intel-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Reject the colorkey ioctls for primary and cursor planes drm/i915: Skip allocating shadow batch for 0-length batches 02 April 2015, 23:27:48 UTC
c7d7487 Merge tag 'topic/drm-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel into drm-fixes Here's a single drm core fix, cc: stable, that affects i915 users. * tag 'topic/drm-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel: drm/edid: set ELD for firmware and debugfs override EDIDs 02 April 2015, 23:27:15 UTC
b0838b1 Merge tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen regression fixes from David Vrabel: "Fix two regressions in the balloon driver's use of memory hotplug when used in a PV guest" * tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: before adding hotplugged memory, set frames to invalid x86/xen: prepare p2m list for memory hotplug 02 April 2015, 20:53:53 UTC
1d51433 Merge tag 'powerpc-4.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fix from Michael Ellerman: "Fix memory corruption by pnv_alloc_idle_core_states" * tag 'powerpc-4.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: fix memory corruption by pnv_alloc_idle_core_states 02 April 2015, 20:48:43 UTC
06459fc Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fix from Roland Dreier: "Fix for exploitable integer overflow in uverbs interface" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic 02 April 2015, 20:35:58 UTC
666b805 tcp: fix FRTO undo on cumulative ACK of SACKed range On processing cumulative ACKs, the FRTO code was not checking the SACKed bit, meaning that there could be a spurious FRTO undo on a cumulative ACK of a previously SACKed skb. The FRTO code should only consider a cumulative ACK to indicate that an original/unretransmitted skb is newly ACKed if the skb was not yet SACKed. The effect of the spurious FRTO undo would typically be to make the connection think that all previously-sent packets were in flight when they really weren't, leading to a stall and an RTO. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO") Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2015, 20:35:58 UTC
0c36820 xen-netfront: transmit fully GSO-sized packets xen-netfront limits transmitted skbs to be at most 44 segments in size. However, GSO permits up to 65536 bytes, which means a maximum of 45 segments of 1448 bytes each. This slight reduction in the size of packets means a slight loss in efficiency. Since c/s 9ecd1a75d, xen-netfront sets gso_max_size to XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER, where XEN_NETIF_MAX_TX_SIZE is 65535 bytes. The calculation used by tcp_tso_autosize (and also tcp_xmit_size_goal since c/s 6c09fa09d) in determining when to split an skb into two is sk->sk_gso_max_size - 1 - MAX_TCP_HEADER. So the maximum permitted size of an skb is calculated to be (XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER) - 1 - MAX_TCP_HEADER. Intuitively, this looks like the wrong formula -- we don't need two TCP headers. Instead, there is no need to deviate from the default gso_max_size of 65536 as this already accommodates the size of the header. Currently, the largest skb transmitted by netfront is 63712 bytes (44 segments of 1448 bytes each), as observed via tcpdump. This patch makes netfront send skbs of up to 65160 bytes (45 segments of 1448 bytes each). Similarly, the maximum allowable mtu does not need to subtract MAX_TCP_HEADER as it relates to the size of the whole packet, including the header. Fixes: 9ecd1a75d977 ("xen-netfront: reduce gso_max_size to account for max TCP header") Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2015, 20:18:58 UTC
0a48127 Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This time we have addition of caps for jz4740 which fixes intentional warning at boot. Then we have memory leak issues in drivers using virt-dma by Peter on few drive" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: moxart-dma: Fix memory leak when stopping a running transfer dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer dmaengine: omap-dma: Fix memory leak when terminating running transfer dmaengine: edma: fix memory leak when terminating running transfers dmaengine: jz4740: Define capabilities 02 April 2015, 18:30:36 UTC
8172ba5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from Johannes Berg. 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry Finger. 3) Need to use for_each_netdev_safe() in rtnl_group_changelink() otherwise we can crash, from WANG Cong. 4) mlx4 driver does register_netdev() too early in the probe sequence, from Ido Shamay. 5) Don't allow router discovery hop limit to decrease the interface's hop limit, from D.S. Ljungmark. 6) tx_packets and tx_bytes improperly accounted for certain classes of USB network devices, fix from Ben Hutchings. 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr tables in the error path, they must instead use ip{6}mr_free_table(). Fix from WANG Cong. 8) cxgb4 doesn't properly quiesce all RX activity before unregistering the netdevice. Fix from Hariprasad Shenai. 9) Fix hash corruptions in ipvlan driver, from Jiri Benc. 10) nla_memcpy(), like a real memcpy, should fully initialize the destination buffer, even if the source attribute is smaller. Fix from Jiri Benc. 11) Fix wrong error code returned from iucv_sock_sendmsg(). We should use whatever sock_alloc_send_skb() put into 'err'. From Eugene Crosser. 12) Fix slab object leak on module unload in TIPC, from Ying Xue. 13) Need a READ_ONCE() when reading the cached RX socket route in tcp_v{4,6}_early_demux(). From Michal Kubecek. 14) Still too many problems with TPC support in the ath9k driver, so disable it for now. From Felix Fietkau. 15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from Larry Finger. 16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cxgb4: Fix to dump devlog, even if FW is crashed cxgb4: Firmware macro changes for fw verison 1.13.32.0 bnx2x: Fix kdump when iommu=on bnx2x: Fix kdump on 4-port device mac80211: fix RX A-MPDU session reorder timer deletion MAINTAINERS: Update Intel Wired Ethernet Driver info tipc: fix a slab object leak net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet af_iucv: fix AF_IUCV sendmsg() errno openvswitch: Return vport module ref before destruction netlink: pad nla_memcpy dest buffer with zeroes bonding: Bonding Overriding Configuration logic restored. ipvlan: fix check for IP addresses in control path ipvlan: do not use rcu operations for address list ipvlan: protect against concurrent link removal ipvlan: fix addr hash list corruption net: fec: setup right value for mdio hold time net: tcp6: fix double call of tcp_v6_fill_cb() cxgb4vf: Fix sparse warnings netns: don't clear nsid too early on removal ... 02 April 2015, 18:09:41 UTC
8494057 IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic Properly verify that the resulting page aligned end address is larger than both the start address and the length of the memory area requested. Both the start and length arguments for ib_umem_get are controlled by the user. A misbehaving user can provide values which will cause an integer overflow when calculating the page aligned end address. This overflow can cause also miscalculation of the number of pages mapped, and additional logic issues. Addresses: CVE-2014-8159 Cc: <stable@vger.kernel.org> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> 02 April 2015, 16:53:59 UTC
c420f19 perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints Some of the CYCLE_ACTIVITY.* events can only be scheduled on counter 2. Due to a typo Haswell matched those with INTEL_EVENT_CONSTRAINT, which lead to the events never matching as the comparison does not expect anything in the umask too. Fix the typo. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1425925222-32361-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 April 2015, 15:07:43 UTC
687805e perf/x86/intel: Filter branches for PEBS event For supporting Intel LBR branches filtering, Intel LBR sharing logic mechanism is introduced from commit b36817e88630 ("perf/x86: Add Intel LBR sharing logic"). It modifies __intel_shared_reg_get_constraints() to config lbr_sel, which is finally used to set LBR_SELECT. However, the intel_shared_regs_constraints() function is called after intel_pebs_constraints(). The PEBS event will return immediately after intel_pebs_constraints(). So it's impossible to filter branches for PEBS events. This patch moves intel_shared_regs_constraints() ahead of intel_pebs_constraints(). We can safely do that because the intel_shared_regs_constraints() function only returns empty constraint if its rejecting the event, otherwise it returns NULL such that we continue calling intel_pebs_constraints() and x86_get_event_constraint(). Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1427467105-9260-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 April 2015, 15:07:42 UTC
22e2e86 drm/radeon: fix wait in radeon_mn_invalidate_range_start We need to wait for all fences, not just the exclusive one. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 02 April 2015, 14:03:29 UTC
863653f drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr We somehow try to free the SG table twice. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89734 Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 02 April 2015, 14:03:29 UTC
adacb22 drm: Exynos: Respect framebuffer pitch for FIMD/Mixer When performing a modeset, use the framebuffer pitch value to set FIMD IMG_SIZE and Mixer SPAN registers. These are both defined as pitch - the distance between contiguous lines (bytes for FIMD, pixels for mixer). Fixes display on Snow (1366x768). Signed-off-by: Daniel Stone <daniels@collabora.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com> 02 April 2015, 13:37:13 UTC
f59df35 kgdb/x86: Fix reporting of 'si' in kgdb on x86_64 This patch fixes an error in kgdb for x86_64 which would report the value of dx when asked to give the value of si. Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 April 2015, 09:32:16 UTC
7ea2416 x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set When I wrote the opportunistic SYSRET code, I missed an important difference between SYSRET and IRET. Both instructions are capable of setting EFLAGS.TF, but they behave differently when doing so: - IRET will not issue a #DB trap after execution when it sets TF. This is critical -- otherwise you'd never be able to make forward progress when returning to userspace. - SYSRET, on the other hand, will trap with #DB immediately after returning to CPL3, and the next instruction will never execute. This breaks anything that opportunistically SYSRETs to a user context with TF set. For example, running this code with TF set and a SIGTRAP handler loaded never gets past 'post_nop': extern unsigned char post_nop[]; asm volatile ("pushfq\n\t" "popq %%r11\n\t" "nop\n\t" "post_nop:" : : "c" (post_nop) : "r11"); In my defense, I can't find this documented in the AMD or Intel manual. Fix it by using IRET to restore TF. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2a23c6b8a9c4 ("x86_64, entry: Use sysret to return to userspace when possible") Link: http://lkml.kernel.org/r/9472f1ca4c19a38ecda45bba9c91b7168135fcfa.1427923514.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 April 2015, 09:09:54 UTC
840a1cf drm/i915: Reject the colorkey ioctls for primary and cursor planes The legcy colorkey ioctls are only implemented for sprite planes, so reject the ioctl for primary/cursor planes. If we want to support colorkeying with these planes (assuming we have hw support of course) we should just move ahead with the colorkey property conversion. Testcase: kms_legacy_colorkey Cc: Tommi Rantala <tt.rantala@gmail.com> Cc: stable@vger.kernel.org Reference: http://mid.gmane.org/CA+ydwtr+bCo7LJ44JFmUkVRx144UDFgOS+aJTfK6KHtvBDVuAw@mail.gmail.com Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 02 April 2015, 08:25:50 UTC
f5f321c Merge tag 'wireless-drivers-for-davem-2015-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix a memory leak, we leaked memory each time the module was loaded. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 18:48:50 UTC
877e45d Merge branch 'cxgb4-net' Hariprasad Shenai says: ==================== cxgb4 FW macro changes for new FW Fix to dump device log even in the case of firmware crash. Also incorporates changes for new FW. This patch series has been created against net tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 18:47:21 UTC
ae469b6 cxgb4: Fix to dump devlog, even if FW is crashed Add new Common Code routines to retrieve Firmware Device Log parameters from PCIE_FW_PF[7]. The firmware initializes its Device Log very early on and stores the parameters for its location/size in that register. Using the parameters from the register allows us to access the Firmware Device Log even when the firmware crashes very early on or we're not attached to the firmware Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 18:47:20 UTC
7ef65a4 cxgb4: Firmware macro changes for fw verison 1.13.32.0 Adds new macro and few macro changes for fw version 1.13.32.0 also changes version string in driver to match 1.13.32.0 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 18:47:20 UTC
af3e09e Merge tag 'mac80211-for-davem-2015-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This contains just a single fix for a crash I happened to randomly run into today during testing. It's clearly been around for a while, but is pretty hard to trigger, even when I tried explicitly (and modified the code to make it more likely) it rarely did. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 18:19:22 UTC
d403931 Merge tag 'iommu-fixes-v4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "This contains fixes for: - a VT-d issue where hardware domain-ids might be freed while still in use. - an ipmmu-vmsa issue where where the device-table was not zero terminated - unchecked register access issue in the arm-smmu driver" * tag 'iommu-fixes-v4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Remove unused variable iommu: ipmmu-vmsa: Add terminating entry for ipmmu_of_ids iommu/vt-d: Detach domain *only* from attached iommus iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS condition 01 April 2015, 17:29:55 UTC
e1b7c02 lguest: now needs PCI_DIRECT. Since commit 8e7094694396 ("lguest: add a dummy PCI host bridge.") lguest uses PCI, but it needs you to frob the ports directly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 April 2015, 17:29:05 UTC
b6c3a59 Merge tag 'lazytime_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull lazytime fixes from Ted Ts'o: "This fixes a problem in the lazy time patches, which can cause frequently updated inods to never have their timestamps updated. These changes guarantee that no timestamp on disk will be stale by more than 24 hours" * tag 'lazytime_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fs: add dirtytime_expire_seconds sysctl fs: make sure the timestamps for lazytime inodes eventually get written 01 April 2015, 17:05:42 UTC
1e84891 Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linux Pull nfsd fixes from Bruce Fields: "Two main issues: - We found that turning on pNFS by default (when it's configured at build time) was too aggressive, so we want to switch the default before the 4.0 release. - Recent client changes to increase open parallelism uncovered a serious bug lurking in the server's open code. Also fix a krb5/selinux regression. The rest is mainly smaller pNFS fixes" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: make debugfs file creation failure non-fatal nfsd: require an explicit option to enable pNFS NFSD: Fix bad update of layout in nfsd4_return_file_layout NFSD: Take care the return value from nfsd4_encode_stateid NFSD: Printk blocklayout length and offset as format 0x%llx nfsd: return correct lockowner when there is a race on hash insert nfsd: return correct openowner when there is a race to put one in the hash NFSD: Put exports after nfsd4_layout_verify fail NFSD: Error out when register_shrinker() fail NFSD: Take care the return value from nfsd4_decode_stateid NFSD: Check layout type when returning client layouts NFSD: restore trace event lost in mismerge 01 April 2015, 16:45:47 UTC
9c02642 Merge branch 'bnx2' Yuval Mintz says: ==================== bnx2x: kdump related fixes This patch series aims to fix bnx2x driver issues when loading in kdump kernel. Both issues fixed here would be fatal to the device, requiring full reset of the system in order to recover, preventing the device from serving its purpose in the kdump environment. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 16:30:39 UTC
da254fb bnx2x: Fix kdump when iommu=on When IOMM-vtd is active, once main kernel crashes unfinished DMAE transactions will be blocked, putting the HW in an error state which will cause further transactions to timeout. Current employed logic uses wrong macros, causing the first function to be the only function that cleanups that error state during its probe/load. This patch allows all the functions to successfully re-load in kdump kernel. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 16:30:39 UTC
3d6b725 bnx2x: Fix kdump on 4-port device When running in a kdump kernel, it's very likely that due to sync. loss with management firmware the first PCI function to probe and reach the previous unload flow would decide it can reset the chip and continue onward. While doing so, it will only close its own Rx port. On a 4-port device where 2nd port on engine is a 1g-port, the 2nd port would allow ingress traffic after the chip is reset [assuming it was active on the first kernel]. This would later cause a HW attention. This changes driver flow to close both ports' 1g capabilities during the previous driver unload flow prior to the chip reset. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 16:30:38 UTC
788211d mac80211: fix RX A-MPDU session reorder timer deletion There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 01 April 2015, 12:35:01 UTC
80313b3 x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in both BIOS and UEFI mode while rebooting unless reboot=pci is used. Add a quirk to reboot via the pci method. The problem is very intermittent and hard to debug, it might succeed rebooting just fine 40 times in a row - but fails half a dozen times the next day. It seems to be slightly less common in BIOS CSM mode than native UEFI (with the CSM disabled), but it does happen in either mode. Since I've started testing this patch in late january, rebooting has been 100% reliable. Most of the time it already hangs during POST, but occasionally it might even make it through the bootloader and the kernel might even start booting, but then hangs before the mode switch. The same symptoms occur with grub-efi, gummiboot and grub-pc, just as well as (at least) kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16). Upgrading to the most current mainboard firmware of the ASRock Q1900DC-ITX, version 1.20, does not improve the situation. ( Searching the web seems to suggest that other Bay Trail-D mainboards might be affected as well. ) -- Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: <stable@vger.kernel.org> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mir Signed-off-by: Ingo Molnar <mingo@kernel.org> 01 April 2015, 12:08:09 UTC
dce5bdf Merge tag 'iio-fixes-for-4.0d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: IIO fixes for 4.0 set 4 A couple more IIO fixes. * Fix check for HAS_IOMEM in the cc100001_adc driver to avoid build errors. Rather curiously it was ORed with Regulator and clock support. * vf610 driver was trying to use an ADC clock outside the possible spec on some boards. The driver assumed a fixed clock speed previously across all boards, but that is not true. This fix ensures that the reported frequency is correct on all boards. * The adis imu common code directly set the current trigger to the driver supplied one. Unfortunately this didn't increase the use count leading to a double free via a particular path of changing the trigger then removing the driver. 01 April 2015, 11:51:02 UTC
d3a3d28 Merge tag 'usb-serial-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.0-rc6 Here are a few new device IDs. Signed-off-by: Johan Hovold <johan@kernel.org> 01 April 2015, 11:42:58 UTC
4c5930e Fix warning Coverity reports a warning due to unitialized attr structure in one code path. Reported by Coverity (CID 728535) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@samba.org> 01 April 2015, 05:01:47 UTC
dfebe40 Fix another dereference before null check warning null tcon is not possible in these paths so remove confusing null check Reported by Coverity (CID 728519) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@samba.org> 01 April 2015, 05:01:47 UTC
8b7a454 CIFS: session servername can't be null remove impossible check Pointed out by Coverity (CID 115422) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@samba.org> 01 April 2015, 05:01:47 UTC
c85c35f Fix warning on impossible comparison workstation_RFC1001_name is part of the struct and can't be null, remove impossible comparison (array vs. null) Pointed out by Coverity (CID 140095) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@samba.org> 01 April 2015, 05:01:47 UTC
064bcc0 Fix coverity warning Coverity reports a warning for referencing the beginning of the SMB2/SMB3 frame using the ProtocolId field as an array. Although it works the same either way, this patch should quiet the warning and might be a little clearer. Reported by Coverity (CID 741269) Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@poochiereds.net> 01 April 2015, 05:01:47 UTC
8e35310 Fix dereference before null check warning null tcon is not likely in these paths in current code, but obviously it does clarify the code to check for null (if at all) before derefrencing rather than after. Reported by Coverity (CID 1042666) Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> 01 April 2015, 05:01:47 UTC
f3a31a2 Don't ignore errors on encrypting password in SMBTcon Although unlikely to fail (and tree connect does not commonly send a password since SECMODE_USER is the default for most servers) do not ignore errors on SMBNTEncrypt in SMB Tree Connect. Reported by Coverity (CID 1226853) Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@poochiereds.net> 01 April 2015, 05:01:46 UTC
75fdfc8 Fix warning on uninitialized buftype Pointed out by coverity analyzer. resp_buftype is not initialized in one path which can rarely log a spurious warning (buf is null so there will not be a problem with freeing data, but if buf_type were randomly set to wrong value could log a warning) Reported by Coverity (CID 1269144) Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@poochiereds.net> 01 April 2015, 05:01:46 UTC
2f30232 MAINTAINERS: Update Intel Wired Ethernet Driver info Update the git tree info with a recent change in tree names. Also add our new mailing list created solely for Linux kernel patches and kernel development, as well as the new patchwork project for tracking patches. Lastly update the list of "reviewers" since a couple of developers have moved on to different projects. Made an update to the section header so that it is more manageable going forward as we add new drivers. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 01 April 2015, 04:26:36 UTC
7e43690 tipc: fix a slab object leak When remove TIPC module, there is a warning to remind us that a slab object is leaked like: root@localhost:~# rmmod tipc [ 19.056226] ============================================================================= [ 19.057549] BUG TIPC (Not tainted): Objects remaining in TIPC on kmem_cache_close() [ 19.058736] ----------------------------------------------------------------------------- [ 19.058736] [ 19.060287] INFO: Slab 0xffffea0000519a00 objects=23 used=1 fp=0xffff880014668b00 flags=0x100000000004080 [ 19.061915] INFO: Object 0xffff880014668000 @offset=0 [ 19.062717] kmem_cache_destroy TIPC: Slab cache still has objects This is because the listening socket of TIPC topology server is not closed before TIPC proto handler is unregistered with proto_unregister(). However, as the socket is closed in tipc_exit_net() which is called by unregister_pernet_subsys() during unregistering TIPC namespace operation, the warning can be eliminated if calling unregister_pernet_subsys() is moved before calling proto_unregister(). Fixes: e05b31f4bf89 ("tipc: make tipc socket support net namespace") Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 April 2015, 03:10:08 UTC
d52356e powerpc: fix memory corruption by pnv_alloc_idle_core_states Space allocated for paca is based off nr_cpu_ids, but pnv_alloc_idle_core_states() iterates paca with cpu_nr_cores()*threads_per_core, which is using NR_CPUS. This causes pnv_alloc_idle_core_states() to write over memory, which is outside of paca array and may later lead to various panics. Fixes: 7cba160ad789 (powernv/cpuidle: Redesign idle states management) Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 01 April 2015, 01:05:44 UTC
3309677 Input: define INPUT_PROP_ACCELEROMETER behavior Spell out what this property means to userspace. If the property is set, all directional axes must be accelerometer axes, any other axes are left as-is. This allows an accelerometer device to e.g. have an ABS_WHEEL. It is not permitted to mix normal directional axes and accelerometer axes on the same device node. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 31 March 2015, 21:46:40 UTC
85734b1 Input: synaptics - fix min-max quirk value for E440 Commit 98dc070373 ("Input: synaptics - add quirk for Thinkpad E440") had a typo in ymax, this changes the value to the one reported by touchpad-edge-detector and mentioned in the commit. Signed-off-by: Filip Ayazi <filipayazi@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 31 March 2015, 21:46:39 UTC
347eec3 net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet This device is sold as 'Lenovo Tinkpad USB 3.0 Ethernet 4X90E51405'. Chipset is RTL8153 and works with r8152. Signed-off-by: Christian Hesse <mail@eworm.de> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 21:15:37 UTC
ed4ac42 af_iucv: fix AF_IUCV sendmsg() errno When sending over AF_IUCV socket, errno was incorrectly set to ENOMEM even when other values where appropriate, notably EAGAIN. With this patch, error indicator returned by sock_alloc_send_skb() is passed to the caller, rather than being overwritten with ENOMEM. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 20:06:50 UTC
fa2d8ff openvswitch: Return vport module ref before destruction Return module reference before invoking the respective vport ->destroy() function. This is needed as ovs_vport_del() is not invoked inside an RCU read side critical section so the kfree can occur immediately before returning to ovs_vport_del(). Returning the module reference before ->destroy() is safe because the module unregistration is blocked on ovs_lock which we hold while destroying the datapath. Fixes: 62b9c8d0372d ("ovs: Turn vports with dependencies into separate modules") Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 19:59:50 UTC
f9c72d1 sunrpc: make debugfs file creation failure non-fatal We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com> 31 March 2015, 18:15:08 UTC
5899f04 netlink: pad nla_memcpy dest buffer with zeroes This is especially important in cases where the kernel allocs a new structure and expects a field to be set from a netlink attribute. If such attribute is shorter than expected, the rest of the field is left containing previous data. When such field is read back by the user space, kernel memory content is leaked. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 18:07:24 UTC
f5e2dc5 bonding: Bonding Overriding Configuration logic restored. Before commit 3900f29021f0bc7fe9815aa32f1a993b7dfdd402 ("bonding: slight optimizztion for bond_slave_override()") the override logic was to send packets with non-zero queue_id through the slave with corresponding queue_id, under two conditions only - if the slave can transmit and it's up. The above mentioned commit changed this logic by introducing an additional condition - whether the bond is active (indirectly, using the slave_can_tx and later - bond_is_active_slave), that prevents the user from implementing more complex policies according to the Documentation/networking/bonding.txt. Signed-off-by: Anton Nayshtut <anton@swortex.com> Signed-off-by: Alexey Bogoslavsky <alexey@swortex.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 17:49:45 UTC
d91e901 Merge branch 'ipvlan-corruptions' Jiri Benc says: ==================== ipvlan: list corruption and rcu fixes This patch set fixes different issues leading to corrupted lists and incorrect rcu usage. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 17:28:38 UTC
e9997c2 ipvlan: fix check for IP addresses in control path When an ipvlan interface is down, its addresses are not on the hash list. Fix checks for existence of addresses not to depend on the hash list, walk through all interface addresses instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 17:28:33 UTC
40891e8 ipvlan: do not use rcu operations for address list All accesses to ipvlan->addrs are under rtnl. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 17:28:33 UTC
2afa650 ipvlan: protect against concurrent link removal Adding and removing to the 'ipvlans' list is already done using _rcu list operations. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 17:28:33 UTC
27705f7 ipvlan: fix addr hash list corruption When ipvlan interface with IP addresses attached is brought down and then deleted, the assigned addresses are deleted twice from the address hash list, first on the interface down and second on the link deletion. Similarly, when an address is added while the interface is down, it is added second time once the interface is brought up. When the interface is down, the addresses should be kept off the hash list for performance reasons. Ensure this is true, which also fixes the double add problem. To fix the double free, check whether the address is hashed before removing it. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2015, 17:28:33 UTC
e963741 block: fix blk_stack_limits() regression due to lcm() change Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n") caused blk_stack_limits() to not properly stack queue_limits for stacked devices (e.g. DM). Fix this regression by establishing lcm_not_zero() and switching blk_stack_limits() over to using it. DM uses blk_set_stacking_limits() to establish the initial top-level queue_limits that are then built up based on underlying devices' limits using blk_stack_limits(). In the case of optimal_io_size (io_opt) blk_set_stacking_limits() establishes a default value of 0. With commit 69c953c, lcm(0, n) is no longer n, which compromises proper stacking of the underlying devices' io_opt. Test: $ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536 $ cat /sys/block/sde/queue/optimal_io_size 786432 $ dmsetup create node --table "0 100 linear /dev/sde 0" Before this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 0 After this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 786432 Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.19+ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com> 31 March 2015, 15:45:50 UTC
36cbf25 Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fix from Matt Fleming: - Fix integer overflow issue in the DMI SMBIOS 3.0 code when calculating the number of DMI table entries. (Jean Delvare) Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 March 2015, 08:45:47 UTC
ca68a52 MAINTAINERS: Change the x86 microcode loader maintainer Let's make it official - I've been doing this for a while now anyway. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 March 2015, 08:04:52 UTC
6c310bc Merge tag 'locks-v4.0-5' of git://git.samba.org/jlayton/linux Pull file locking fix from Jeff Layton: "Another small fix for the lease overhaul" * tag 'locks-v4.0-5' of git://git.samba.org/jlayton/linux: locks: fix file_lock deletion inside loop 30 March 2015, 22:13:04 UTC
f3f0333 nfsd: require an explicit option to enable pNFS Turns out sending out layouts to any client is a bad idea if they can't get at the storage device, so require explicit admin action to enable pNFS. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> 30 March 2015, 20:05:26 UTC
32374ea Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Nothing exciting. Two patches to update queued trim blacklist" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Blacklist queued TRIM on Samsung SSD 850 Pro libata: Update Crucial/Micron blacklist 30 March 2015, 18:08:37 UTC
fbef403 dmaengine: moxart-dma: Fix memory leak when stopping a running transfer The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 30 March 2015, 17:47:08 UTC
f931782 dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 30 March 2015, 17:47:08 UTC
02d88b7 dmaengine: omap-dma: Fix memory leak when terminating running transfer In omap_dma_start_desc the vdesc->node is removed from the virt-dma framework managed lists (to be precise from the desc_issued list). If a terminate_all comes before the transfer finishes the omap_desc will not be freed up because it is not in any of the lists and we stopped the DMA channel so the transfer will not going to complete. There is no special sequence for leaking memory when using cyclic (audio) transfer: with every start and stop of a cyclic transfer the driver leaks struct omap_desc worth of memory. Free up the allocated memory directly in omap_dma_terminate_all() since the framework will not going to do that for us. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> CC: <linux-omap@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 30 March 2015, 17:47:08 UTC
5ca9e7c dmaengine: edma: fix memory leak when terminating running transfers If edma_terminate_all() was called while a transfer was running (i.e. after edma_execute() but before edma_callback()) the echan->edesc was not freed. This was due to the fact that a running transfer is on none of the vchan lists: desc_submitted, desc_issued, desc_completed (edma_execute() removes it from the desc_issued list), so the vchan_dma_desc_free_list() called at the end of edma_terminate_all() didn't find it and didn't free it. This bug was found on an AM1808 based hardware (very similar to da850evm, however using the second MMC/SD controller), where intense operations on the SD card wasted the device 128MB RAM within a couple of days. Peter Ujfalusi: The issue is even more severe since it affects cyclic (audio) transfers as well. In this case starting/stopping audio will results memory leak. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> CC: <linux-omap@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 30 March 2015, 17:47:08 UTC
ca76683 dmaengine: jz4740: Define capabilities Setup the capabilities of the device/driver, so that users of the DMAengine API can query them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 30 March 2015, 17:30:23 UTC
29059af Merge tag 'gpio-v4.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull late GPIO fixes from Linus Walleij: "Here are the (hopefully) last GPIO fixes for v4.0. Nothing controversial whatsoever, just fixes: - syscon GPIO fix for Keystone DSP GPIOs - pin number translation fix for ACPI GPIO - a smallish compiler warning fix on the mpc8xxx driver" * tag 'gpio-v4.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: syscon: reduce message level when direction reg offset not in dt gpiolib: translate pin number in GPIO ACPI callbacks gpio: mpc8xxx: remove __initdata annotation for mpc8xxx_gpio_ids[] 30 March 2015, 16:14:41 UTC
ee73c61 drm/i915: Skip allocating shadow batch for 0-length batches Since commit 17cabf571e50677d980e9ab2a43c5f11213003ae Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jan 14 11:20:57 2015 +0000 drm/i915: Trim the command parser allocations we may then try to allocate a zero-sized object and attempt to extract its pages. Understandably this fails. Note that the real offender seems to be commit b9ffd80ed659c559152c042e74741f4f60cac691 Author: Brad Volkin <bradley.d.volkin@intel.com> Date: Thu Dec 11 12:13:10 2014 -0800 drm/i915: Use batch length instead of object size in command parser Testcase: igt/gem_exec_nop #ivb,byt,hsw Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [cherry picked from commit 743e78c1d726d875b98ff9689cc77c4d3d5d9ae2 from drm-intel-next because 4.0 seems to be affected by this too, despite that the obvious culprit is definitely not in 4.0. Whatever, if fixes a bug. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> 30 March 2015, 14:59:47 UTC
back to top