https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
2bd6bf0 Linux 4.14-rc1 16 September 2017, 22:47:51 UTC
194a4ef Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines 16 September 2017, 19:08:10 UTC
2896b80 Merge branch 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE 16 September 2017, 19:03:25 UTC
48bddb1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ... 16 September 2017, 18:28:59 UTC
c850372 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size 16 September 2017, 18:24:26 UTC
df85b2d firmware: Restore support for built-in firmware Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Greg K-H <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2017, 17:58:48 UTC
8e29f97 mlxsw: spectrum_router: Only handle IPv4 and IPv6 events The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Andreas Rammhold <andreas@rammhold.de> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2017, 16:21:43 UTC
2130c02 Documentation: link in networking docs Fix link in filter.txt. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2017, 16:12:48 UTC
fc22579 tcp: fix data delivery rate Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2017, 16:07:01 UTC
7318413 Merge branch '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ... 16 September 2017, 03:43:33 UTC
8d93c7a Merge tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges" 16 September 2017, 03:25:06 UTC
02cfe97 Merge tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux Pull drm AMD fixes from Dave Airlie: "Just had a single AMD fixes pull from Alex for rc1" * tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" drm/amdgpu: remove duplicate return statement drm/amdgpu: check memory allocation failure drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2) drm/amdgpu: inline amdgpu_ttm_do_bind again drm/amdgpu: fix amdgpu_ttm_bind drm/amdgpu: remove the GART copy hack drm/ttm:fix wrong decoding of bo_count drm/ttm: fix missing inc bo_count drm/amdgpu: set sched_hw_submission higher for KIQ (v3) drm/amdgpu: move default gart size setting into gmc modules drm/amdgpu: refine default gart size drm/amd/powerplay: ACG frequency added in PPTable drm/amdgpu: discard commands of killed processes drm/amdgpu: fix and cleanup shadow handling drm/amdgpu: add automatic per asic settings for gart_size drm/amdgpu/gfx8: fix spelling typo in mqd allocation drm/amd/powerplay: unhalt mec after loading drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately drm/amdgpu: Fix huge page updates with CPU 16 September 2017, 00:52:52 UTC
bbe05e5 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller 16 September 2017, 00:49:46 UTC
9db5959 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: - PPC bugfixes - RCU splat fix - swait races fix - pointless userspace-triggerable BUG() fix - misc fixes for KVM_RUN corner cases - nested virt correctness fixes + one host DoS - some cleanups - clang build fix - fix AMD AVIC with default QEMU command line options - x86 bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry kvm,mips: Fix potential swait_active() races kvm,powerpc: Serialize wq active checks in ops->vcpu_kick kvm: Serialize wq active checks in kvm_vcpu_wake_up() kvm,x86: Fix apf_task_wake_one() wq serialization kvm,lapic: Justify use of swait_active() kvm,async_pf: Use swq_has_sleeper() sched/wait: Add swq_has_sleeper() KVM: VMX: Do not BUG() on out-of-bounds guest IRQ KVM: Don't accept obviously wrong gsi values via KVM_IRQFD kvm: nVMX: Don't allow L2 to access the hardware CR8 KVM: trace events: update list of exit reasons KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously KVM: X86: Don't block vCPU if there is pending exception KVM: SVM: Add irqchip_split() checks before enabling AVIC KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv() KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu() KVM: x86: fix clang build ... 15 September 2017, 22:43:55 UTC
e67b8a6 bpf/verifier: reject BPF_ALU64|BPF_END Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 22:01:32 UTC
8c7c19a sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:51:15 UTC
d25adbe sctp: fix an use-after-free issue in sctp_sock_dump Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:47:49 UTC
5023a6d netvsc: increase default receive buffer size The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:41:12 UTC
8c72c65 tcp: update skb->skb_mstamp more carefully liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:36:28 UTC
cbea8f0 net: ipv4: fix l3slave check for index returned in IP_PKTINFO rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:27:51 UTC
2aa70f8 net: smsc911x: Quieten netif during suspend If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:24:49 UTC
7095c97 net: systemport: Fix 64-bit stats deadlock We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:24:10 UTC
ecf0911 net: vrf: avoid gcc-4.6 warning When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:22:21 UTC
4739df6 qed: remove unnecessary call to memset call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 September 2017, 21:02:05 UTC
b38923a Merge tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull firmware removal from Greg KH: "Many many years ago (at the kernel summit in Boston), we all came to the agreement that the firmware/ tree should be dropped from the kernel, and everyone use the linux-firmware package instead. For some minor reason, David Woodhouse didn't send the pull request at that point in time, and everyone forgot about this. The topic came up in the hallway track at the Plumbers conference this week, so here's a single patch that drops the whole firmware tree. The last firmware update was back in 2013, and all distros have been using linux-firmware instead since at least that year, if not before. The only commits to that directory since 2013 was some kbuild fixups for various build tool issues. So lets finally drop this, we don't need to lug them around in the kernel source tree anymore, especially as no one wants or uses them. This has passed build testing with 0-day, I don't think it made it into linux-next this week, but I figured it was good to get in before 4.14-rc1 was out" * tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: delete in-kernel firmware 15 September 2017, 19:58:55 UTC
866a30e Merge tag 'nios2-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull arch/nios2 update from Ley Foon Tan. * tag 'nios2-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: time: Read timer in get_cycles only if initialized nios2: add earlycon support to 3c120 devboard DTS 15 September 2017, 19:47:21 UTC
418702b Merge tag 'powerpc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "Just one fix, for the handling of alignment interrupts on dcbz instructions. Thanks to Paul Mackerras, Christian Zigotzky, Michal Sojka" * tag 'powerpc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix handling of alignment interrupt on dcbz instruction 15 September 2017, 19:44:59 UTC
30db202 Merge tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs updates from Mike Marshall: "Some cleanups and a big bug fix for ACLs. When I was reviewing Jan Kara's ACL patch, I realized that Orangefs ACL code was busted, not just in the kernel module, but in the server as well. I've been working on the code in the server mostly, but here's one kernel patch, there will be more" * tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: Adjust three checks for null pointers orangefs: Use kcalloc() in orangefs_prepare_cdm_array() orangefs: Delete error messages for a failed memory allocation in five functions orangefs: constify xattr_handler structure orangefs: don't call filemap_write_and_wait from fsync orangefs: off by ones in xattr size checks orangefs: documentation clean up orangefs: react properly to posix_acl_update_mode's aftermath. orangefs: Don't clear SGID when inheriting ACLs 15 September 2017, 19:16:18 UTC
bbc8608 Merge branch 'next' into for-linus Prepare second round of input updates for 4.14 merge window. 15 September 2017, 16:52:21 UTC
697c5d8 Input: i8042 - add Gigabyte P57 to the keyboard reset table Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 15 September 2017, 16:51:22 UTC
4f350c6 kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly When emulating a nested VM-entry from L1 to L2, several control field validation checks are deferred to the hardware. Should one of these validation checks fail, vcpu_vmx_run will set the vmx->fail flag. When this happens, the L2 guest state is not loaded (even in part), and execution should continue in L1 with the next instruction after the VMLAUNCH/VMRESUME. The VMCS12 is not modified (except for the VM-instruction error field), the VMCS12 MSR save/load lists are not processed, and the CPU state is not loaded from the VMCS12 host area. Moreover, the vmcs02 exit reason is stale, so it should not be consulted for any reason. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:15 UTC
b060ca3 kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly On an early VMLAUNCH/VMRESUME failure (i.e. one which sets the VM-instruction error field of the current VMCS), the launch state of the current VMCS is not set to "launched," and the VM-exit information fields of the current VMCS (including IDT-vectoring information and exit reason) are stale. On a late VMLAUNCH/VMRESUME failure (i.e. one which sets the high bit of the exit reason field), the launch state of the current VMCS is not set to "launched," and only two of the VM-exit information fields of the current VMCS are modified (exit reason and exit qualification). The remaining VM-exit information fields of the current VMCS (including IDT-vectoring information, in particular) are stale. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:15 UTC
7881f96 kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry After a successful VM-entry, RFLAGS is cleared, with the exception of bit 1, which is always set. This is handled by load_vmcs12_host_state. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:14 UTC
4c0b4bc kvm,mips: Fix potential swait_active() races For example, the following could occur, making us miss a wakeup: CPU0 CPU1 kvm_vcpu_block kvm_mips_comparecount_func [L] swait_active(&vcpu->wq) [S] prepare_to_swait(&vcpu->wq) [L] if (!kvm_vcpu_has_pending_timer(vcpu)) schedule() [S] queue_timer_int(vcpu) Ensure that the swait_active() check is not hoisted over the interrupt. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:13 UTC
267ad7b kvm,powerpc: Serialize wq active checks in ops->vcpu_kick Particularly because kvmppc_fast_vcpu_kick_hv() is a callback, ensure that we properly serialize wq active checks in order to avoid potentially missing a wakeup due to racing with the waiter side. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:13 UTC
5e0018b kvm: Serialize wq active checks in kvm_vcpu_wake_up() This is a generic call and can be suceptible to races in reading the wq task_list while another task is adding itself to the list. Add a full barrier by using the swq_has_sleeper() helper. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:12 UTC
a0cff57 kvm,x86: Fix apf_task_wake_one() wq serialization During code inspection, the following potential race was seen: CPU0 CPU1 kvm_async_pf_task_wait apf_task_wake_one [L] swait_active(&n->wq) [S] prepare_to_swait(&n.wq) [L] if (!hlist_unhahed(&n.link)) schedule() [S] hlist_del_init(&n->link); Properly serialize swait_active() checks such that a wakeup is not missed. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:12 UTC
cc1b468 kvm,lapic: Justify use of swait_active() A comment might serve future readers. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:11 UTC
b9f67a4 kvm,async_pf: Use swq_has_sleeper() ... as we've got the new helper now. This caller already does the right thing, hence no changes in semantics. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:11 UTC
8cd641e sched/wait: Add swq_has_sleeper() Which is the equivalent of what we have in regular waitqueues. I'm not crazy about the name, but this also helps us get both apis closer -- which iirc comes originally from the -net folks. We also duplicate the comments for the lockless swait_active(), from wait.h. Future users will make use of this interface. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:57:10 UTC
3a8b067 KVM: VMX: Do not BUG() on out-of-bounds guest IRQ The value of the guest_irq argument to vmx_update_pi_irte() is ultimately coming from a KVM_IRQFD API call. Do not BUG() in vmx_update_pi_irte() if the value is out-of bounds. (Especially, since KVM as a whole seems to hang after that.) Instead, print a message only once if we find that we don't have a route for a certain IRQ (which can be out-of-bounds or within the array). This fixes CVE-2017-1000252. Fixes: efc644048ecde54 ("KVM: x86: Update IRTE for posted-interrupts") Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:56:43 UTC
36ae3c0 KVM: Don't accept obviously wrong gsi values via KVM_IRQFD We cannot add routes for gsi values >= KVM_MAX_IRQ_ROUTES -- see kvm_set_irq_routing(). Hence, there is no sense in accepting them via KVM_IRQFD. Prevent them from entering the system in the first place. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 14:55:28 UTC
65d1e3d nios2: time: Read timer in get_cycles only if initialized Mainline crashes as follows when running nios2 images. On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c8408fa0, node_mem_map c8726000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65536 pages, LIFO batch:15 Unable to handle kernel NULL pointer dereference at virtual address 00000000 ea = c8003cb0, ra = c81cbf40, cause = 15 Kernel panic - not syncing: Oops Problem is seen because get_cycles() is called before the timer it depends on is initialized. Returning 0 in that situation fixes the problem. Fixes: 33d72f3822d7 ("init/main.c: extract early boot entropy from the ..") Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 15 September 2017, 12:30:58 UTC
8993d5e nios2: add earlycon support to 3c120 devboard DTS Allow earlycon to be used on the JTAG UART present in the 3c120 GHRD. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> 15 September 2017, 12:30:52 UTC
51aa68e kvm: nVMX: Don't allow L2 to access the hardware CR8 If L1 does not specify the "use TPR shadow" VM-execution control in vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store exiting" VM-execution controls in vmcs02. Failure to do so will give the L2 VM unrestricted read/write access to the hardware CR8. This fixes CVE-2017-12154. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 September 2017, 12:05:46 UTC
0f50a49 Revert "PCI: Avoid race while enabling upstream bridges" This reverts commit 40f11adc7cd9281227f0a6a627d966dd0a5f0cd9. Jens found that iwlwifi firmware loading failed on a Lenovo X1 Carbon, gen4: iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2 iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2 iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2 iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 ... iwlwifi 0000:04:00.0: Failed to load firmware chunk! iwlwifi 0000:04:00.0: Could not load the [0] uCode section iwlwifi 0000:04:00.0: Failed to start INIT ucode: -110 iwlwifi 0000:04:00.0: Failed to run INIT ucode: -110 He bisected it to 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges"). Revert that commit to fix the regression. Link: http://lkml.kernel.org/r/4bcbcbc1-7c79-09f0-5071-bc2f53bf6574@kernel.dk Fixes: 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Srinath Mannam <srinath.mannam@broadcom.com> CC: Jens Axboe <axboe@kernel.dk> CC: Luca Coelho <luca@coelho.fi> CC: Johannes Berg <johannes@sipsolutions.net> CC: Emmanuel Grumbach <emmanuel.grumbach@intel.com> 15 September 2017, 06:33:51 UTC
711aab1 vfs: constify path argument to kernel_read_file_from_path This patch constifies the path argument to kernel_read_file_from_path(). Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 September 2017, 03:18:45 UTC
6ed0529 Merge tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull more NFS client updates from Trond Myklebust: "Hightlights include: Bugfixes: - Various changes relating to reporting IO errors. - pnfs: Use the standard I/O stateid when calling LAYOUTGET Features: - Add static NFS I/O tracepoints for debugging" * tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: various changes relating to reporting IO errors. NFS: Add static NFS I/O tracepoints pNFS: Use the standard I/O stateid when calling LAYOUTGET 15 September 2017, 03:04:32 UTC
9e0ce55 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc leftovers from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the __user misannotations in asm-generic get_user/put_user fput: Don't reinvent the wheel but use existing llist API namespace.c: Don't reinvent the wheel but use existing llist API 15 September 2017, 03:01:41 UTC
e253d98 Merge branch 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull nowait read support from Al Viro: "Support IOCB_NOWAIT for buffered reads and block devices" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: block_dev: support RFW_NOWAIT on block device nodes fs: support RWF_NOWAIT for buffered reads fs: support IOCB_NOWAIT in generic_file_buffered_read fs: pass iocb to do_generic_file_read 15 September 2017, 02:29:55 UTC
0f0d127 Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags 15 September 2017, 01:54:01 UTC
581bfce Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter 15 September 2017, 01:13:32 UTC
cc73fee Merge branch 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout 15 September 2017, 00:37:26 UTC
e7cdb60 Merge branch 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull zstd support from Chris Mason: "Nick Terrell's patch series to add zstd support to the kernel has been floating around for a while. After talking with Dave Sterba, Herbert and Phillip, we decided to send the whole thing in as one pull request. zstd is a big win in speed over zlib and in compression ratio over lzo, and the compression team here at FB has gotten great results using it in production. Nick will continue to update the kernel side with new improvements from the open source zstd userland code. Nick has a number of benchmarks for the main zstd code in his lib/zstd commit: I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is 211,988,480 B large. Run the following commands for the benchmark: sudo modprobe zstd_compress_test sudo mknod zstd_compress_test c 245 0 sudo cp silesia.tar zstd_compress_test The time is reported by the time of the userland `cp`. The MB/s is computed with 1,536,217,008 B / time(buffer size, hash) which includes the time to copy from userland. The Adjusted MB/s is computed with 1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)). The memory reported is the amount of memory the compressor requests. | Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) | |----------|----------|----------|-------|---------|----------|----------| | none | 11988480 | 0.100 | 1 | 2119.88 | - | - | | zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 | | zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 | | zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 | | zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 | | zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 | | zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 | | zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 | | zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 | | zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 | | zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 | I benchmarked zstd decompression using the same method on the same machine. The benchmark file is located in the upstream zstd repo under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is the amount of memory required to decompress data compressed with the given compression level. If you know the maximum size of your input, you can reduce the memory usage of decompression irrespective of the compression level. | Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) | |----------|----------|---------|---------------|-------------| | none | 0.025 | 8479.54 | - | - | | zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 | | zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 | | zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 | | zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 | | zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 | | zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 | | zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 | | zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 | I ran a long series of tests and benchmarks on the btrfs side and the gains are very similar to the core benchmarks Nick ran" * 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: squashfs: Add zstd support btrfs: Add zstd support lib: Add zstd modules lib: Add xxhash module 15 September 2017, 00:30:49 UTC
1bc944c powerpc: Fix handling of alignment interrupt on dcbz instruction This fixes the emulation of the dcbz instruction in the alignment interrupt handler. The error was that we were comparing just the instruction type field of op.type rather than the whole thing, and therefore the comparison "type != CACHEOP + DCBZ" was always true. Fixes: 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Tested-by: Michal Sojka <sojkam1@fel.cvut.cz> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 14 September 2017, 22:41:18 UTC
5620a0d firmware: delete in-kernel firmware The last firmware change for the in-kernel firmware source code was back in 2013. Everyone has been relying on the out-of-tree linux-firmware package for a long long time. So let's drop it, it's baggage we don't need to keep dragging around (and having to fix random kbuild issues over time...) Cc: Kyle McMartin <kyle@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <mmarek@suse.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 14 September 2017, 21:49:41 UTC
a2bc8de Merge tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use Make-builtin $(abspath ...) helper to get absolute path - Add W=2 extra warning option to detect unused macros - Use more KCONFIG_CONFIG instead hard-coded .config - Fix bugs of tar*-pkg targets * tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: buildtar: do not print successful message if tar returns error kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled kbuild: Use KCONFIG_CONFIG in buildtar Kbuild: enable -Wunused-macros warning for "make W=2" kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd) 14 September 2017, 20:46:33 UTC
dff4d1f Merge tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through 14 September 2017, 20:43:16 UTC
503f045 Merge tag 'fbdev-v4.14' of git://github.com/bzolnier/linux Pull fbdev updates from Bartlomiej Zolnierkiewicz: - make fbcon a built-time depency for fbdev (fbcon was tristate option before, now it is a bool) - this is a first step in preparations for making console_lock usage saner (currently it acts like the BKL for all things fbdev/fbcon) (Daniel Vetter) - add fbcon=margin:<color> command line option to select the fbcon margin color (David Lechner) - add DMI quirk table for x86 systems which need fbcon rotation (devices like Asus T100HA, GPD Pocket, the GPD win and the I.T.Works TW891) (Hans de Goede) - fix 1bpp logo support for unusual width (needed by LEGO MINDSTORMS EV3) (David Lechner) - enable Xilinx FB driver for ARM ZynqMP platform (Michal Simek) - fix use after free in the error path of udlfb driver (Anton Vasilyev) - fix error return code handling in pxa3xx_gcu driver (Gustavo A. R. Silva) - fix bootparams.screeninfo arguments checking in vgacon (Jan H. Schönherr) - do not leak uninitialized padding in clk to userspace in the debug code of atyfb driver (Vladis Dronov) - fix compiler warnings in fbcon code and matroxfb driver (Arnd Bergmann) - convert fbdev susbsytem to using %pOF instead of full_name (Rob Herring) - structures constifications (Arvind Yadav, Bhumika Goyal, Gustavo A. R. Silva, Julia Lawall) - misc cleanups (Gustavo A. R. Silva, Hyun Kwon, Julia Lawall, Kuninori Morimoto, Lynn Lei) * tag 'fbdev-v4.14' of git://github.com/bzolnier/linux: (75 commits) video/console: Update BIOS dates list for GPD win console rotation DMI quirk video/console: Add rotated LCD-panel DMI quirk for the VIOS LTH17 video: fbdev: sis: fix duplicated code for different branches video: fbdev: make fb_var_screeninfo const video: fbdev: aty: do not leak uninitialized padding in clk to userspace vgacon: Prevent faulty bootparams.screeninfo from causing harm video: fbdev: make fb_videomode const video/console: Add new BIOS date for GPD pocket to dmi quirk table fbcon: remove restriction on margin color video: ARM CLCD: constify amba_id video: fm2fb: constify zorro_device_id video: fbdev: annotate fb_fix_screeninfo with const and __initconst omapfb: constify omap_video_timings structures video: fbdev: udlfb: Fix use after free on dlfb_usb_probe error path fbdev: i810: make fb_ops const fbdev: matrox: make fb_ops const video: fbdev: pxa3xx_gcu: fix error return code in pxa3xx_gcu_probe() video: fbdev: Enable Xilinx FB for ZynqMP video: fbdev: Fix multiple style issues in xilinxfb video: fbdev: udlfb: constify usb_device_id. ... 14 September 2017, 20:33:33 UTC
939ae58 Merge git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add support for the watchdog on Meson8 and Meson8m2 - add support for MediaTek MT7623 and MT7622 SoC - add support for the r8a77995 wdt - explicitly request exclusive reset control for asm9260_wdt, zx2967_wdt, rt2880_wdt and mt7621_wdt - improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt - add support for reading freq via CCF + suspend/resume support for of_xilinx_wdt - constify watchdog_ops and various device-id structures - revert of commit 1fccb73011ea ("iTCO_wdt: all versions count down twice") (Bug 196509) * git://www.linux-watchdog.org/linux-watchdog: (40 commits) watchdog: mei_wdt: constify mei_cl_device_id watchdog: sp805: constify amba_id watchdog: ziirave: constify i2c_device_id watchdog: sc1200: constify pnp_device_id dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt watchdog: renesas_wdt: update copyright dates watchdog: renesas_wdt: make 'clk' a variable local to probe() watchdog: renesas_wdt: consistently use RuntimePM for clock management watchdog: aspeed: Support configuration of external signal properties dt-bindings: watchdog: aspeed: External reset signal properties drivers/watchdog: Add optional ASPEED device tree properties drivers/watchdog: ASPEED reference dev tree properties for config watchdog: da9063_wdt: Simplify by removing unneeded struct... watchdog: bcm7038: Check the return value from clk_prepare_enable() watchdog: qcom: Check for platform_get_resource() failure watchdog: of_xilinx_wdt: Add suspend/resume support watchdog: of_xilinx_wdt: Add support for reading freq via CCF dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC watchdog: max77620_wdt: constify platform_device_id watchdog: pcwd_usb: constify usb_device_id ... 14 September 2017, 20:28:30 UTC
e75f801 Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare: "Mark all struct dmi_system_id instances const" * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi: Mark all struct dmi_system_id instances const 14 September 2017, 20:10:48 UTC
ba76853 Merge tag 'pinctrl-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "This slew of fixes for pin control was noticed and patched up early, so to get the annoyance out of the way for -rc1 it would make sense to send them already. - Fix a build include in the Uniphier driver to keep pace with ongoing refactorings. - Fix a slew of minor semantic and syntactic issues as well as stricting up Kconfig for the new Spreadtrum driver. - Fix the GPIO interrupt set-up on the Marvell 37xx Armada as fallout for dynamically allocating irq descriptors from the core. (Also tagged for stable.) - Fix AMD register suspend/resume state spool/unspooling so that wakeup works as it should. (Also tagged for stable.)" * tag 'pinctrl-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/amd: save pin registers over suspend/resume pinctrl: armada-37xx: Fix gpio interrupt setup pinctrl: sprd: fix off by one bugs pinctrl: sprd: check for allocation failure pinctrl: sprd: Restrict PINCTRL_SPRD to ARCH_SPRD or COMPILE_TEST pinctrl: sprd: fix build errors and dependencies pinctrl: sprd: make three local functions static pinctrl: uniphier: include <linux/build_bug.h> instead of <linux/bug.h> 14 September 2017, 20:01:09 UTC
7a95bdb Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "A few leftovers" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, page_owner: skip unnecessary stack_trace entries arm64: stacktrace: avoid listing stacktrace functions in stacktrace mm: treewide: remove GFP_TEMPORARY allocation flag IB/mlx4: fix sprintf format warning fscache: fix fscache_objlist_show format processing lib/test_bitmap.c: use ULL suffix for 64-bit constants procfs: remove unused variable drivers/media/cec/cec-adap.c: fix build with gcc-4.4.4 idr: remove WARN_ON_ONCE() when trying to replace negative ID 14 September 2017, 19:25:34 UTC
0b08273 orangefs: Adjust three checks for null pointers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:58:31 UTC
5e273a0 orangefs: Use kcalloc() in orangefs_prepare_cdm_array() * A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:58:30 UTC
07a2585 orangefs: Delete error messages for a failed memory allocation in five functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:58:29 UTC
1217444 orangefs: constify xattr_handler structure The xattr_handler structure is only stored in an array of const structures. Thus the xattr_handler structure itself can be const. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:58:29 UTC
49e5571 orangefs: don't call filemap_write_and_wait from fsync Orangefs doesn't do buffered writes yet, so there's no point in initiating and waiting for writeback. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:58:28 UTC
5f13e58 orangefs: off by ones in xattr size checks A previous patch which claimed to remove off by ones actually introduced them. strlen() returns the length of the string not including the NUL character. We are using strcpy() to copy "name" into a buffer which is ORANGEFS_MAX_XATTR_NAMELEN characters long. We should make sure to leave space for the NUL, otherwise we're writing one character beyond the end of the buffer. Fixes: e675c5ec51fe ("orangefs: clean up oversize xattr validation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:58:27 UTC
ba5e79e orangefs: documentation clean up Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:54:39 UTC
4bef690 orangefs: react properly to posix_acl_update_mode's aftermath. posix_acl_update_mode checks to see if the permissions described by the ACL can be encoded into the object's mode. If so, it sets "acl" to NULL and "mode" to the new desired value. Prior to this patch we failed to actually propagate the new mode back to the server. Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:54:38 UTC
b5accbb orangefs: Don't clear SGID when inheriting ACLs When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by creating __orangefs_set_acl() function that does not call posix_acl_update_mode() and use it when inheriting ACLs. That prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: stable@vger.kernel.org CC: Mike Marshall <hubcap@omnibond.com> CC: pvfs2-developers@beowulf-underground.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Marshall <hubcap@omnibond.com> 14 September 2017, 18:54:37 UTC
23f4822 tg3: clean up redundant initialization of tnapi tnapi is being initialized and then immediately updated and hence the initialiation is redundant. Clean up the warning by moving the declaration and initialization to the inside of the for-loop. Cleans up clang scan-build warning: warning: Value stored to 'tnapi' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 September 2017, 17:00:29 UTC
11a19c7 sched/wait: Introduce wakeup boomark in wake_up_page_bit Now that we have added breaks in the wait queue scan and allow bookmark on scan position, we put this logic in the wake_up_page_bit function. We can have very long page wait list in large system where multiple pages share the same wait list. We break the wake up walk here to allow other cpus a chance to access the list, and not to disable the interrupts when traversing the list for too long. This reduces the interrupt and rescheduling latency, and excessive page wait queue lock hold time. [ v2: Remove bookmark_wake_function ] Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 16:56:18 UTC
2554db9 sched/wait: Break up long wake list walk We encountered workloads that have very long wake up list on large systems. A waker takes a long time to traverse the entire wake list and execute all the wake functions. We saw page wait list that are up to 3700+ entries long in tests of large 4 and 8 socket systems. It took 0.8 sec to traverse such list during wake up. Any other CPU that contends for the list spin lock will spin for a long time. It is a result of the numa balancing migration of hot pages that are shared by many threads. Multiple CPUs waking are queued up behind the lock, and the last one queued has to wait until all CPUs did all the wakeups. The page wait list is traversed with interrupt disabled, which caused various problems. This was the original cause that triggered the NMI watch dog timer in: https://patchwork.kernel.org/patch/9800303/ . Only extending the NMI watch dog timer there helped. This patch bookmarks the waker's scan position in wake list and break the wake up walk, to allow access to the list before the waker resume its walk down the rest of the wait list. It lowers the interrupt and rescheduling latency. This patch also provides a performance boost when combined with the next patch to break up page wakeup list walk. We saw 22% improvement in the will-it-scale file pread2 test on a Xeon Phi system running 256 threads. [ v2: Merged in Linus' changes to remove the bookmark_wake_function, and simply access to flags. ] Reported-by: Kan Liang <kan.liang@intel.com> Tested-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 16:56:17 UTC
a513567 tls: make tls_sw_free_resources static Make the needlessly global function tls_sw_free_resources static to fix a gcc/sparse warning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 14 September 2017, 16:55:21 UTC
488e32f KVM: trace events: update list of exit reasons Adding entries for exit reasons 23 - 27: KVM_EXIT_EPR KVM_EXIT_SYSTEM_EVENT KVM_EXIT_S390_STSI KVM_EXIT_IOAPIC_EOI KVM_EXIT_HYPERV Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> 14 September 2017, 16:54:14 UTC
9a6e7c3 KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously qemu-system-x86-8600 [004] d..1 7205.687530: kvm_entry: vcpu 2 qemu-system-x86-8600 [004] .... 7205.687532: kvm_exit: reason EXCEPTION_NMI rip 0xffffffffa921297d info ffffeb2c0e44e018 80000b0e qemu-system-x86-8600 [004] .... 7205.687532: kvm_page_fault: address ffffeb2c0e44e018 error_code 0 qemu-system-x86-8600 [004] .... 7205.687620: kvm_try_async_get_page: gva = 0xffffeb2c0e44e018, gfn = 0x427e4e qemu-system-x86-8600 [004] .N.. 7205.687628: kvm_async_pf_not_present: token 0x8b002 gva 0xffffeb2c0e44e018 kworker/4:2-7814 [004] .... 7205.687655: kvm_async_pf_completed: gva 0xffffeb2c0e44e018 address 0x7fcc30c4e000 qemu-system-x86-8600 [004] .... 7205.687703: kvm_async_pf_ready: token 0x8b002 gva 0xffffeb2c0e44e018 qemu-system-x86-8600 [004] d..1 7205.687711: kvm_entry: vcpu 2 After running some memory intensive workload in guest, I catch the kworker which completes the GUP too quickly, and queues an "Page Ready" #PF exception after the "Page not Present" exception before the next vmentry as the above trace which will result in #DF injected to guest. This patch fixes it by clearing the queue for "Page not Present" if "Page Ready" occurs before the next vmentry since the GUP has already got the required page and shadow page table has already been fixed by "Page Ready" handler. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Fixes: 7c90705bf2a3 ("KVM: Inject asynchronous page fault into a PV guest if page is swapped out.") [Changed indentation and added clearing of injected. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> 14 September 2017, 16:43:43 UTC
aeb068c i2c: i2c-stm32f7: add driver This patch adds initial support for the STM32F7 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 14 September 2017, 15:34:43 UTC
df8c847 i2c: i2c-stm32f4: use generic definition of speed enum This patch uses a more generic definition of speed enum for i2c-stm32f4 driver. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Reviewed-by: Ludovic BARRE <ludovic.barre@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 14 September 2017, 15:34:29 UTC
edcd2ae dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings This patch adds the documentation of device tree bindings for STM32F7 I2C Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 14 September 2017, 15:34:14 UTC
648d453 Merge branch 'kvm-ppc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Bug fixes for stable. 14 September 2017, 15:21:10 UTC
a5f01f8 KVM: X86: Don't block vCPU if there is pending exception Don't block vCPU if there is pending exception. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> 14 September 2017, 15:16:14 UTC
67034bb KVM: SVM: Add irqchip_split() checks before enabling AVIC SVM AVIC hardware accelerates guest write to APIC_EOI register (for edge-trigger interrupt), which means it does not trap to KVM. So, only enable SVM AVIC only in split irqchip mode. (e.g. launching qemu w/ option '-machine kernel_irqchip=split'). Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Fixes: 44a95dae1d22 ("KVM: x86: Detect and Initialize AVIC support") [Removed pr_debug - Radim.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> 14 September 2017, 15:05:13 UTC
6faadbb dmi: Mark all struct dmi_system_id instances const ... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de> 14 September 2017, 09:59:30 UTC
5f48f0b mm, page_owner: skip unnecessary stack_trace entries The page_owner stacktrace always begin as follows: [<ffffff987bfd48f4>] save_stack+0x40/0xc8 [<ffffff987bfd4da8>] __set_page_owner+0x3c/0x6c These two entries do not provide any useful information and limits the available stacktrace depth. The page_owner stacktrace was skipping caller function from stack entries but this was missed with commit f2ca0b557107 ("mm/page_owner: use stackdepot to store stacktrace") Example page_owner entry after the patch: Page allocated via order 0, mask 0x8(ffffff80085fb714) PFN 654411 type Movable Block 639 type CMA Flags 0x0(ffffffbe5c7f12c0) [<ffffff9b64989c14>] post_alloc_hook+0x70/0x80 ... [<ffffff9b651216e8>] msm_comm_try_state+0x5f8/0x14f4 [<ffffff9b6512486c>] msm_vidc_open+0x5e4/0x7d0 [<ffffff9b65113674>] msm_v4l2_open+0xa8/0x224 Link: http://lkml.kernel.org/r/1504078343-28754-2-git-send-email-guptap@codeaurora.org Fixes: f2ca0b557107 ("mm/page_owner: use stackdepot to store stacktrace") Signed-off-by: Prakash Gupta <guptap@codeaurora.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:16 UTC
bb53c82 arm64: stacktrace: avoid listing stacktrace functions in stacktrace The stacktraces always begin as follows: [<c00117b4>] save_stack_trace_tsk+0x0/0x98 [<c0011870>] save_stack_trace+0x24/0x28 ... This is because the stack trace code includes the stack frames for itself. This is incorrect behaviour, and also leads to "skip" doing the wrong thing (which is the number of stack frames to avoid recording.) Perversely, it does the right thing when passed a non-current thread. Fix this by ensuring that we have a known constant number of frames above the main stack trace function, and always skip these. This was fixed for arch arm by commit 3683f44c42e9 ("ARM: stacktrace: avoid listing stacktrace functions in stacktrace") Link: http://lkml.kernel.org/r/1504078343-28754-1-git-send-email-guptap@codeaurora.org Signed-off-by: Prakash Gupta <guptap@codeaurora.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:16 UTC
0ee931c mm: treewide: remove GFP_TEMPORARY allocation flag GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:16 UTC
d0dbf77 IB/mlx4: fix sprintf format warning gcc-7 points out that a negative port_num value would overflow the string buffer: drivers/infiniband/hw/mlx4/sysfs.c: In function 'mlx4_ib_device_register_sysfs': drivers/infiniband/hw/mlx4/sysfs.c:251:16: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] drivers/infiniband/hw/mlx4/sysfs.c:251:2: note: 'sprintf' output between 2 and 11 bytes into a destination of size 10 drivers/infiniband/hw/mlx4/sysfs.c:303:17: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] drivers/infiniband/hw/mlx4/sysfs.c:303:3: note: 'sprintf' output between 2 and 11 bytes into a destination of size 10 While we should be able to assume that port_num is positive here, making the buffer one byte longer has no downsides and avoids the warning. Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device") Link: http://lkml.kernel.org/r/20170714120720.906842-23-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:15 UTC
ebfddb3 fscache: fix fscache_objlist_show format processing gcc points out a minor bug in the handling of unknown cookie types, which could result in a string overflow when the integer is copied into a 3-byte string: fs/fscache/object-list.c: In function 'fscache_objlist_show': fs/fscache/object-list.c:265:19: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(_type, "%02u", cookie->def->type); ^~~~~~ fs/fscache/object-list.c:265:4: note: 'sprintf' output between 3 and 4 bytes into a destination of size 3 This is currently harmless as no code sets a type other than 0 or 1, but it makes sense to use snprintf() here to avoid overflowing the array if that changes. Link: http://lkml.kernel.org/r/20170714120720.906842-22-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:15 UTC
8185f57 lib/test_bitmap.c: use ULL suffix for 64-bit constants With gcc 4.1.2: lib/test_bitmap.c:189: warning: integer constant is too large for `long' type lib/test_bitmap.c:190: warning: integer constant is too large for `long' type lib/test_bitmap.c:194: warning: integer constant is too large for `long' type lib/test_bitmap.c:195: warning: integer constant is too large for `long' type Add the missing "ULL" suffix to fix this. Link: http://lkml.kernel.org/r/1505040523-31230-1-git-send-email-geert@linux-m68k.org Fixes: 60ef690018b262dd ("bitmap: introduce BITMAP_FROM_U64()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:15 UTC
6dec0dd procfs: remove unused variable In NOMMU configurations, we get a warning about a variable that has become unused: fs/proc/task_nommu.c: In function 'nommu_vma_show': fs/proc/task_nommu.c:148:28: error: unused variable 'priv' [-Werror=unused-variable] Link: http://lkml.kernel.org/r/20170911200231.3171415-1-arnd@arndb.de Fixes: 1240ea0dc3bb ("fs, proc: remove priv argument from is_stack") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:15 UTC
c848c49 drivers/media/cec/cec-adap.c: fix build with gcc-4.4.4 gcc-4.4.4 has issues with initialization of anonymous unions: drivers/media/cec/cec-adap.c: In function 'cec_queue_msg_fh': drivers/media/cec/cec-adap.c:184: error: unknown field 'lost_msgs' specified in initializer work around this. Fixes: 6b2bbb08747a5 ("media: cec: rework the cec event handling") Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:15 UTC
a47f68d idr: remove WARN_ON_ONCE() when trying to replace negative ID IDR only supports non-negative IDs. There used to be a 'WARN_ON_ONCE(id < 0)' in idr_replace(), but it was intentionally removed by commit 2e1c9b286765 ("idr: remove WARN_ON_ONCE() on negative IDs"). Then it was added back by commit 0a835c4f090a ("Reimplement IDR and IDA using the radix tree"). However it seems that adding it back was a mistake, given that some users such as drm_gem_handle_delete() (DRM_IOCTL_GEM_CLOSE) pass in a value from userspace to idr_replace(), allowing the WARN_ON_ONCE to be triggered. drm_gem_handle_delete() actually just wants idr_replace() to return an error code if the ID is not allocated, including in the case where the ID is invalid (negative). So once again remove the bogus WARN_ON_ONCE(). This bug was found by syzkaller, which encountered the following warning: WARNING: CPU: 3 PID: 3008 at lib/idr.c:157 idr_replace+0x1d8/0x240 lib/idr.c:157 Kernel panic - not syncing: panic_on_warn set ... CPU: 3 PID: 3008 Comm: syzkaller218828 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:930 RIP: 0010:idr_replace+0x1d8/0x240 lib/idr.c:157 RSP: 0018:ffff8800394bf9f8 EFLAGS: 00010297 RAX: ffff88003c6c60c0 RBX: 1ffff10007297f43 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800394bfa78 RBP: ffff8800394bfae0 R08: ffffffff82856487 R09: 0000000000000000 R10: ffff8800394bf9a8 R11: ffff88006c8bae28 R12: ffffffffffffffff R13: ffff8800394bfab8 R14: dffffc0000000000 R15: ffff8800394bfbc8 drm_gem_handle_delete+0x33/0xa0 drivers/gpu/drm/drm_gem.c:297 drm_gem_close_ioctl+0xa1/0xe0 drivers/gpu/drm/drm_gem.c:671 drm_ioctl_kernel+0x1e7/0x2e0 drivers/gpu/drm/drm_ioctl.c:729 drm_ioctl+0x72e/0xa50 drivers/gpu/drm/drm_ioctl.c:825 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe Here is a C reproducer: #include <fcntl.h> #include <stddef.h> #include <stdint.h> #include <sys/ioctl.h> #include <drm/drm.h> int main(void) { int cardfd = open("/dev/dri/card0", O_RDONLY); ioctl(cardfd, DRM_IOCTL_GEM_CLOSE, &(struct drm_gem_close) { .handle = -1 } ); } Link: http://lkml.kernel.org/r/20170906235306.20534-1-ebiggers3@gmail.com Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> [v4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 September 2017, 01:53:15 UTC
fa5f7b5 sctp: potential read out of bounds in sctp_ulpevent_type_enabled() This code causes a static checker warning because Smatch doesn't trust anything that comes from skb->data. I've reviewed this code and I do think skb->data can be controlled by the user here. The sctp_event_subscribe struct has 13 __u8 fields and we want to see if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range. We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read either before the start of the struct or after the end. This is a very old bug and it's surprising that it would go undetected for so long but my theory is that it just doesn't have a big impact so it would be hard to notice. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 September 2017, 23:59:47 UTC
0560ad5 i2c: altera: Add Altera I2C Controller driver Add driver support for the Altera I2C Controller. The I2C controller is soft IP for use in FPGAs. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 13 September 2017, 21:37:16 UTC
8f73681 dt-bindings: i2c: Add Altera I2C Controller Add the documentation to support the Altera synthesizable logic I2C Controller in FPGA. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 13 September 2017, 21:37:16 UTC
6fa9c62 MAINTAINERS: review Renesas DT bindings as well When adding myself as a reviewer for the Renesas Ethernet drivers I somehow forgot about the bindings -- I want to review them as well. Fixes: 8e6569af3a1b ("MAINTAINERS: add myself as Renesas Ethernet drivers reviewer") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 September 2017, 20:41:04 UTC
6d20e6b um: return negative in tuntap_open_tramp() The intention is to return negative error codes. "pid" is already negative but we accidentally negate it again back to positive. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at> 13 September 2017, 20:36:50 UTC
7b24afb um: remove a stray tab Static checkers would urge us to add curly braces to this code, but actually the code works correctly. It just isn't indented right. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at> 13 September 2017, 20:36:27 UTC
back to top