Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
d8a5b80 Linus Torvalds 28 January 2018, 21:20:33 UTC Linux 4.15 28 January 2018, 21:20:33 UTC
24b1ccc Linus Torvalds 28 January 2018, 20:24:36 UTC Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 retpoline fixlet from Thomas Gleixner: "Remove the ESP/RSP thunks for retpoline as they cannot ever work. Get rid of them before they show up in a release" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retpoline: Remove the esp/rsp thunk 28 January 2018, 20:24:36 UTC
32c6cdf Linus Torvalds 28 January 2018, 20:19:23 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of small fixes for 4.15: - Fix vmapped stack synchronization on systems with 4-level paging and a large amount of memory caused by a missing 5-level folding which made the pgd synchronization logic to fail and causing double faults. - Add a missing sanity check in the vmalloc_fault() logic on 5-level paging systems. - Bring back protection against accessing a freed initrd in the microcode loader which was lost by a wrong merge conflict resolution. - Extend the Broadwell micro code loading sanity check. - Add a missing ENDPROC annotation in ftrace assembly code which makes ORC unhappy. - Prevent loading the AMD power module on !AMD platforms. The load itself is uncritical, but an unload attempt results in a kernel crash. - Update Peter Anvins role in the MAINTAINERS file" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ftrace: Add one more ENDPROC annotation x86: Mark hpa as a "Designated Reviewer" for the time being x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems x86/microcode: Fix again accessing initrd after having been freed x86/microcode/intel: Extend BDW late-loading further with LLC size check perf/x86/amd/power: Do not load AMD power module on !AMD platforms 28 January 2018, 20:19:23 UTC
07b0137 Linus Torvalds 28 January 2018, 20:17:35 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for a ~10 years old problem which causes high resolution timers to stop after a CPU unplug/plug cycle due to a stale flag in the per CPU hrtimer base struct. Paul McKenney was hunting this for about a year, but the heisenbug nature made it resistant against debug attempts for quite some time" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Reset hrtimer cpu base proper on CPU hotplug 28 January 2018, 20:17:35 UTC
6244419 Linus Torvalds 28 January 2018, 19:51:45 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single bug fix to prevent a subtle deadlock in the scheduler core code vs cpu hotplug" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix cpu.max vs. cpuhotplug deadlock 28 January 2018, 19:51:45 UTC
39e3836 Linus Torvalds 28 January 2018, 19:48:25 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Four patches which all address lock inversions and deadlocks in the perf core code and the Intel debug store" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix perf,x86,cpuhp deadlock perf/core: Fix ctx::mutex deadlock perf/core: Fix another perf,trace,cpuhp lock inversion perf/core: Fix lock inversion between perf,trace,cpuhp 28 January 2018, 19:48:25 UTC
8c76e31 Linus Torvalds 28 January 2018, 19:20:35 UTC Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two final locking fixes for 4.15: - Repair the OWNER_DIED logic in the futex code which got wreckaged with the recent fix for a subtle race condition. - Prevent the hard lockup detector from triggering when dumping all held locks in the system" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks() futex: Fix OWNER_DEAD fixup 28 January 2018, 19:20:35 UTC
dd08516 Josh Poimboeuf 28 January 2018, 02:21:50 UTC x86/ftrace: Add one more ENDPROC annotation When ORC support was added for the ftrace_64.S code, an ENDPROC for function_hook() was missed. This results in the following warning: arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction Fixes: e2ac83d74a4d ("x86/ftrace: Fix ORC unwinding from ftrace handlers") Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180128022150.dqierscqmt3uwwsr@treble 28 January 2018, 08:19:12 UTC
d5421ea Thomas Gleixner 26 January 2018, 13:54:32 UTC hrtimer: Reset hrtimer cpu base proper on CPU hotplug The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos 27 January 2018, 14:12:22 UTC
8a95b74 H. Peter Anvin 25 January 2018, 19:59:34 UTC x86: Mark hpa as a "Designated Reviewer" for the time being Due to some unfortunate events, I have not been directly involved in the x86 kernel patch flow for a while now. I have also not been able to ramp back up by now like I had hoped to, and after reviewing what I will need to work on both internally at Intel and elsewhere in the near term, it is clear that I am not going to be able to ramp back up until late 2018 at the very earliest. It is not acceptable to not recognize that this load is currently taken by Ingo and Thomas without my direct participation, so I mark myself as R: (designated reviewer) rather than M: (maintainer) until further notice. This is in fact recognizing the de facto situation for the past few years. I have obviously no intention of going away, and I will do everything within my power to improve Linux on x86 and x86 for Linux. This, however, puts credit where it is due and reflects a change of focus. This patch also removes stale entries for portions of the x86 architecture which have not been maintained separately from arch/x86 for a long time. If there is a reason to re-introduce them then that can happen later. Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bruce Schlobohm <bruce.schlobohm@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 27 January 2018, 09:11:00 UTC
c4e0ca7 Linus Torvalds 26 January 2018, 23:10:50 UTC Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V update from Palmer Dabbelt: "RISC-V: We have a new mailing list and git repo! Sorry to send something essentially as late as possible (Friday after an rc9), but we managed to get a mailing list for the RISC-V Linux port. We've been using patches@groups.riscv.org for a while, but that list has some problems (it's Google Groups and it's shared over all RISC-V software projects). The new infaread.org list is much better. We just got it on Wednesday but I used it a bit on Thursday to shake out all the configuration problems and it appears to be in working order. When I updated the mailing list I noticed that the MAINTAINERS file was pointing to our github repo, but now that we have a kernel.org repo I'd like to point to that instead so I changed that as well. We'll be centralizing all RISC-V Linux related development here as that seems to be the saner way to go about it. I can understand if it's too late to get this into 4.15, but given that it's not a code change I was hoping it'd still be OK. It would be nice to have the new mailing list and git repo in the release tarballs so when people start to find bugs they'll get to the right place" * tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Update the RISC-V MAINTAINERS file 26 January 2018, 23:10:50 UTC
ba804bb Linus Torvalds 26 January 2018, 17:03:16 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) The per-network-namespace loopback device, and thus its namespace, can have its teardown deferred for a long time if a kernel created TCP socket closes and the namespace is exiting meanwhile. The kernel keeps trying to finish the close sequence until it times out (which takes quite some time). Fix this by forcing the socket closed in this situation, from Dan Streetman. 2) Fix regression where we're trying to invoke the update_pmtu method on route types (in this case metadata tunnel routes) that don't implement the dst_ops method. Fix from Nicolas Dichtel. 3) Fix long standing memory corruption issues in r8169 driver by performing the chip statistics DMA programming more correctly. From Francois Romieu. 4) Handle local broadcast sends over VRF routes properly, from David Ahern. 5) Don't refire the DCCP CCID2 timer endlessly, otherwise the socket can never be released. From Alexey Kodanev. 6) Set poll flags properly in VSOCK protocol layer, from Stefan Hajnoczi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state net: vrf: Add support for sends to local broadcast address r8169: fix memory corruption on retrieval of hardware statistics. net: don't call update_pmtu unconditionally net: tcp: close sock if net namespace is exiting 26 January 2018, 17:03:16 UTC
db21854 Linus Torvalds 26 January 2018, 16:59:57 UTC Merge tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A fairly urgent nouveau regression fix for broken irqs across suspend/resume came in. This was broken before but a patch in 4.15 has made it much more obviously broken and now s/r fails a lot more often. The fix removes freeing the irq across s/r which never should have been done anyways. Also two vc4 fixes for a NULL deference and some misrendering / flickering on screen" * tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: Move irq setup/teardown to pci ctor/dtor drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state() drm/vc4: Flush the caches before the bin jobs, as well. 26 January 2018, 16:59:57 UTC
ba3169f Stefan Hajnoczi 26 January 2018, 11:48:25 UTC VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING select(2) with wfds but no rfds must return when the socket is shut down by the peer. This way userspace notices socket activity and gets -EPIPE from the next write(2). Currently select(2) does not return for virtio-vsock when a SEND+RCV shutdown packet is received. This is because vsock_poll() only sets POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the socket is in when the shutdown is received. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2018, 16:16:27 UTC
dd5684e Alexey Kodanev 26 January 2018, 12:14:16 UTC dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state ccid2_hc_tx_rto_expire() timer callback always restarts the timer again and can run indefinitely (unless it is stopped outside), and after commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"), which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from dccp_destroy_sock() to sk_destruct(), this started to happen quite often. The timer prevents releasing the socket, as a result, sk_destruct() won't be called. Found with LTP/dccp_ipsec tests running on the bonding device, which later couldn't be unloaded after the tests were completed: unregister_netdevice: waiting for bond0 to become free. Usage count = 148 Fixes: 2a91aa396739 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2018, 16:15:00 UTC
6572cc2 Palmer Dabbelt 24 January 2018, 21:26:11 UTC Update the RISC-V MAINTAINERS file Now that we're upstream in Linux we've been able to make some infrastructure changes so our port works a bit more like other ports. Specifically: * We now have a mailing list specific to the RISC-V Linux port, hosted at lists.infreadead.org. * We now have a kernel.org git tree where work on our port is coordinated. This patch changes the RISC-V maintainers entry to reflect these new bits of infrastructure. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 26 January 2018, 16:01:24 UTC
36b3a77 Andy Lutomirski 25 January 2018, 21:12:15 UTC x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels On a 5-level kernel, if a non-init mm has a top-level entry, it needs to match init_mm's, but the vmalloc_fault() code skipped over the BUG_ON() that would have checked it. While we're at it, get rid of the rather confusing 4-level folded "pgd" logic. Cleans-up: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Neil Berrington <neil.berrington@datacore.com> Link: https://lkml.kernel.org/r/2ae598f8c279b0a29baf75df207e6f2fdddc0a1b.1516914529.git.luto@kernel.org 26 January 2018, 14:56:23 UTC
5beda7d Andy Lutomirski 25 January 2018, 21:12:14 UTC x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses large amounts of vmalloc space with PTI enabled. The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd folding code into account, so, on a 4-level kernel, the pgd synchronization logic compiles away to exactly nothing. Interestingly, the problem doesn't trigger with nopti. I assume this is because the kernel is mapped with global pages if we boot with nopti. The sequence of operations when we create a new task is that we first load its mm while still running on the old stack (which crashes if the old stack is unmapped in the new mm unless the TLB saves us), then we call prepare_switch_to(), and then we switch to the new stack. prepare_switch_to() pokes the new stack directly, which will populate the mapping through vmalloc_fault(). I assume that we're getting lucky on non-PTI systems -- the old stack's TLB entry stays alive long enough to make it all the way through prepare_switch_to() and switch_to() so that we make it to a valid stack. Fixes: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support") Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org 26 January 2018, 14:56:23 UTC
baa35cc Dave Airlie 26 January 2018, 05:27:07 UTC Merge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixes Single irq regression fix * 'linux-4.15' of git://github.com/skeggsb/linux: drm/nouveau: Move irq setup/teardown to pci ctor/dtor 26 January 2018, 05:27:07 UTC
1e19c4d David Ahern 25 January 2018, 03:37:37 UTC net: vrf: Add support for sends to local broadcast address Sukumar reported that sends to the local broadcast address (255.255.255.255) are broken. Check for the address in vrf driver and do not redirect to the VRF device - similar to multicast packets. With this change sockets can use SO_BINDTODEVICE to specify an egress interface and receive responses. Note: the egress interface can not be a VRF device but needs to be the enslaved device. https://bugzilla.kernel.org/show_bug.cgi?id=198521 Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2018, 02:51:03 UTC
a78e936 Francois Romieu 26 January 2018, 00:53:26 UTC r8169: fix memory corruption on retrieval of hardware statistics. Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 January 2018, 02:34:04 UTC
993ca20 Linus Torvalds 26 January 2018, 01:30:47 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main item is that we try to better handle the newer trackpoints on Lenovo devices that are now being produced by Elan/ALPS/NXP and only implement a small subset of the original IBM trackpoint controls" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01" Input: trackpoint - only expose supported controls for Elan, ALPS and NXP Input: trackpoint - force 3 buttons if 0 button is reported Input: xpad - add support for PDP Xbox One controllers Input: stmfts,s6sy671 - add SPDX identifier 26 January 2018, 01:30:47 UTC
6793f1c Martin Brandenburg 26 January 2018, 00:39:44 UTC orangefs: fix deadlock; do not write i_size in read_iter After do_readv_writev, the inode cache is invalidated anyway, so i_size will never be read. It will be fetched from the server which will also know about updates from other machines. Fixes deadlock on 32-bit SMP. See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2 Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 January 2018, 01:26:24 UTC
0fd189a Lyude Paul 25 January 2018, 23:29:53 UTC drm/nouveau: Move irq setup/teardown to pci ctor/dtor For a while we've been having issues with seemingly random interrupts coming from nvidia cards when resuming them. Originally the fix for this was thought to be just re-arming the MSI interrupt registers right after re-allocating our IRQs, however it seems a lot of what we do is both wrong and not even nessecary. This was made apparent by what appeared to be a regression in the mainline kernel that started introducing suspend/resume issues for nouveau: a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation) After this commit was introduced, we started getting interrupts from the GPU before we actually re-allocated our own IRQ (see references below) and assigned the IRQ handler. Investigating this turned out that the problem was not with the commit, but the fact that nouveau even free/allocates it's irqs before and after suspend/resume. For starters: drivers in the linux kernel haven't had to handle freeing/re-allocating their IRQs during suspend/resume cycles for quite a while now. Nouveau seems to be one of the few drivers left that still does this, despite the fact there's no reason we actually need to since disabling interrupts from the device side should be enough, as the kernel is already smart enough to know to disable host-side interrupts for us before going into suspend. Since we were tearing down our IRQs by hand however, that means there was a short period during resume where interrupts could be received before we re-allocated our IRQ which would lead to us getting an unhandled IRQ. Since we never handle said IRQ and re-arm the interrupt registers, this would cause us to miss all of the interrupts from the GPU and cause our init process to start timing out on anything requiring interrupts. So, since this whole setup/teardown every suspend/resume cycle is useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor functions instead so they're only called at driver load and driver unload. This should fix most of the issues with pending interrupts on resume, along with getting suspend/resume for nouveau to work again. As well, this probably means we can also just remove the msi rearm call inside nvkm_pci_init(). But since our main focus here is to fix suspend/resume before 4.15, we'll save that for a later patch. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Galbraith <efault@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 25 January 2018, 23:44:39 UTC
f15ca72 Nicolas Dichtel 25 January 2018, 18:03:03 UTC net: don't call update_pmtu unconditionally Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2018, 21:27:34 UTC
6e20630 Linus Torvalds 25 January 2018, 17:32:10 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Radim Krčmář: "Fix races and a potential use after free in the s390 cmma migration code" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: add proper locking for CMMA migration bitmap 25 January 2018, 17:32:10 UTC
525273f Linus Torvalds 25 January 2018, 17:03:10 UTC Merge tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "It's been reported recently that readdir can list stale entries under some conditions. Fix it." * tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix stale entries in readdir 25 January 2018, 17:03:10 UTC
4ee806d Dan Streetman 18 January 2018, 21:14:26 UTC net: tcp: close sock if net namespace is exiting When a tcp socket is closed, if it detects that its net namespace is exiting, close immediately and do not wait for FIN sequence. For normal sockets, a reference is taken to their net namespace, so it will never exit while the socket is open. However, kernel sockets do not take a reference to their net namespace, so it may begin exiting while the kernel socket is still open. In this case if the kernel socket is a tcp socket, it will stay open trying to complete its close sequence. The sock's dst(s) hold a reference to their interface, which are all transferred to the namespace's loopback interface when the real interfaces are taken down. When the namespace tries to take down its loopback interface, it hangs waiting for all references to the loopback interface to release, which results in messages like: unregister_netdevice: waiting for lo to become free. Usage count = 1 These messages continue until the socket finally times out and closes. Since the net namespace cleanup holds the net_mutex while calling its registered pernet callbacks, any new net namespace initialization is blocked until the current net namespace finishes exiting. After this change, the tcp socket notices the exiting net namespace, and closes immediately, releasing its dst(s) and their reference to the loopback interface, which lets the net namespace continue exiting. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811 Signed-off-by: Dan Streetman <ddstreet@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 January 2018, 15:56:45 UTC
efe951d Peter Zijlstra 10 January 2018, 18:23:08 UTC perf/x86: Fix perf,x86,cpuhp deadlock More lockdep gifts, a 5-way lockup race: perf_event_create_kernel_counter() perf_event_alloc() perf_try_init_event() x86_pmu_event_init() __x86_pmu_event_init() x86_reserve_hardware() #0 mutex_lock(&pmc_reserve_mutex); reserve_ds_buffer() #1 get_online_cpus() perf_event_release_kernel() _free_event() hw_perf_event_destroy() x86_release_hardware() #0 mutex_lock(&pmc_reserve_mutex) release_ds_buffer() #1 get_online_cpus() #1 do_cpu_up() perf_event_init_cpu() #2 mutex_lock(&pmus_lock) #3 mutex_lock(&ctx->mutex) sys_perf_event_open() mutex_lock_double() #3 mutex_lock(ctx->mutex) #4 mutex_lock_nested(ctx->mutex, 1); perf_try_init_event() #4 mutex_lock_nested(ctx->mutex, 1) x86_pmu_event_init() intel_pmu_hw_config() x86_add_exclusive() #0 mutex_lock(&pmc_reserve_mutex) Fix it by using ordering constructs instead of locking. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 25 January 2018, 13:48:30 UTC
0c7296c Peter Zijlstra 09 January 2018, 20:23:02 UTC perf/core: Fix ctx::mutex deadlock Lockdep noticed the following 3-way lockup scenario: sys_perf_event_open() perf_event_alloc() perf_try_init_event() #0 ctx = perf_event_ctx_lock_nested(1) perf_swevent_init() swevent_hlist_get() #1 mutex_lock(&pmus_lock) perf_event_init_cpu() #1 mutex_lock(&pmus_lock) #2 mutex_lock(&ctx->mutex) sys_perf_event_open() mutex_lock_double() #2 mutex_lock() #0 mutex_lock_nested() And while we need that perf_event_ctx_lock_nested() for HW PMUs such that they can iterate the sibling list, trying to match it to the available counters, the software PMUs need do no such thing. Exclude them. In particular the swevent triggers the above invertion, while the tpevent PMU triggers a more elaborate one through their event_mutex. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 25 January 2018, 13:48:30 UTC
43fa87f Peter Zijlstra 09 January 2018, 16:07:59 UTC perf/core: Fix another perf,trace,cpuhp lock inversion Lockdep noticed the following 3-way lockup race: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_ioctl() #4 ctx = perf_event_ctx_lock() _perf_iotcl() ftrace_profile_set_filter() #0 mutex_lock(&event_mutex) Fudge it for now by noting that the tracepoint state does not depend on the event <-> context relation. Ugly though :/ Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> 25 January 2018, 13:48:30 UTC
82d9485 Peter Zijlstra 09 January 2018, 12:10:30 UTC perf/core: Fix lock inversion between perf,trace,cpuhp Lockdep gifted us with noticing the following 4-way lockup scenario: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_event_task_disable() mutex_lock(&current->perf_event_mutex) #4 ctx = perf_event_ctx_lock() #5 perf_event_for_each_child() do_exit() task_work_run() __fput() perf_release() perf_event_release_kernel() #4 mutex_lock(&ctx->mutex) #5 mutex_lock(&event->child_mutex) free_event() _free_event() event->destroy() := perf_trace_destroy #0 mutex_lock(&event_mutex); Fix that by moving the free_event() out from under the locks. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 25 January 2018, 13:48:29 UTC
7e3f8e9 Dave Airlie 25 January 2018, 02:28:15 UTC Merge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Two vc4 fixes that were applied in the last day. One fixes a NULL dereference, and the other fixes a flickering bug. Cc: Eric Anholt <eric@anholt.net> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> * tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state() drm/vc4: Flush the caches before the bin jobs, as well. 25 January 2018, 02:28:15 UTC
5b7d279 Linus Torvalds 25 January 2018, 01:24:30 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Avoid negative netdev refcount in error flow of xfrm state add, from Aviad Yehezkel. 2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the ethernet header protocol field in xfrm{4,6}_mode_tunnel_input(). From Yossi Kuperman. 3) Fix a syzbot triggered skb_under_panic in pppoe having to do with failing to allocate an appropriate amount of headroom. From Guillaume Nault. 4) Fix memory leak in vmxnet3 driver, from Neil Horman. 5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module, from Wolfgang Bumiller. 6) Restrict what kinds of sockets can be bound to the KCM multiplexer and also disallow when another layer has attached to the socket and made use of sk_user_data. From Tom Herbert. 7) Fix use before init of IOTLB in vhost code, from Jason Wang. 8) Correct STACR register write bit definition in IBM emac driver, from Ivan Mikhaylov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/ibm/emac: wrong bit is used for STA control register write net/ibm/emac: add 8192 rx/tx fifo size vhost: do not try to access device IOTLB when not initialized vhost: use mutex_lock_nested() in vhost_dev_lock_vqs() i40e: flower: check if TC offload is enabled on a netdev qed: Free reserved MR tid qed: Remove reserveration of dpi for kernel kcm: Check if sk_user_data already set in kcm_attach kcm: Only allow TCP sockets to be attached to a KCM mux net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr net: sched: em_nbyte: don't add the data offset twice mlxsw: spectrum_router: Don't log an error on missing neighbor vmxnet3: repair memory leak ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL pppoe: take ->needed_headroom of lower device into account on xmit xfrm: fix boolean assignment in xfrm_get_type_offload xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version xfrm: fix error flow in case of add state fails xfrm: Add SA to hardware at the end of xfrm_state_construct() 25 January 2018, 01:24:30 UTC
f165495 Linus Torvalds 24 January 2018, 23:49:02 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc bugfix from David Miller: "Sparc Makefile typo fix" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64 24 January 2018, 23:49:02 UTC
624ca9c Ivan Mikhaylov 24 January 2018, 12:53:25 UTC net/ibm/emac: wrong bit is used for STA control register write STA control register has areas of mode and opcodes for opeations. 18 bit is using for mode selection, where 0 is old MIO/MDIO access method and 1 is indirect access mode. 19-20 bits are using for setting up read/write operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode with 19 bit and write operation is set into 18 bit which is mode selection, not a write operation. To correlate write with read we set it into 20 bit. All those bit operations are MSB 0 based. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 23:10:57 UTC
45d6e54 Ivan Mikhaylov 24 January 2018, 12:53:24 UTC net/ibm/emac: add 8192 rx/tx fifo size emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes, in current state if we set it up in dts 8192 as example, we will get only 2048 which may impact on network speed. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 23:10:57 UTC
060403f Nick Dyer 24 January 2018, 21:46:04 UTC Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01" Since the sysfs attribute hangs off the RMI bus, which doesn't go away during firmware flash, it needs to be explicitly removed, otherwise we would try and register the same attribute twice. This reverts commit 36a44af5c176d619552d99697433261141dd1296. Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 24 January 2018, 22:44:05 UTC
6f3180a Jason Wang 23 January 2018, 09:27:26 UTC vhost: do not try to access device IOTLB when not initialized The code will try to access dev->iotlb when processing VHOST_IOTLB_INVALIDATE even if it was not initialized which may lead to NULL pointer dereference. Fixes this by check dev->iotlb before. Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:55:38 UTC
e9cb423 Jason Wang 23 January 2018, 09:27:25 UTC vhost: use mutex_lock_nested() in vhost_dev_lock_vqs() We used to call mutex_lock() in vhost_dev_lock_vqs() which tries to hold mutexes of all virtqueues. This may confuse lockdep to report a possible deadlock because of trying to hold locks belong to same class. Switch to use mutex_lock_nested() to avoid false positive. Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+dbb7c1161485e61b0241@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:55:37 UTC
b7051cb Jakub Kicinski 23 January 2018, 08:08:40 UTC i40e: flower: check if TC offload is enabled on a netdev Since TC block changes drivers are required to check if the TC hw offload flag is set on the interface themselves. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: 44ae12a768b7 ("net: sched: move the can_offload check from binding phase to rule insertion phase") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:50:51 UTC
aebb48f Corentin Labbe 23 January 2018, 14:33:14 UTC sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64 This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64 Fixes: 81658ad0d923 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:47:55 UTC
ee45bea David S. Miller 24 January 2018, 21:44:21 UTC Merge branch 'qed-rdma-bug-fixes' Michal Kalderon says: ==================== qed: rdma bug fixes This patch contains two small bug fixes related to RDMA. Both related to resource reservations. ==================== Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:44:21 UTC
1fe280a Michal Kalderon 23 January 2018, 09:33:47 UTC qed: Free reserved MR tid A tid was allocated for reserved MR during initialization but not freed. This lead to an annoying output message during rdma unload flow. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:44:21 UTC
4de4947 Michal Kalderon 23 January 2018, 09:33:46 UTC qed: Remove reserveration of dpi for kernel Double reservation for kernel dedicated dpi was performed. Once in the core module and once in qedr. Remove the reservation from core. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 21:44:21 UTC
88d1d76 David S. Miller 24 January 2018, 20:54:31 UTC Merge branch 'kcm-fix-two-syzcaller-issues' Tom Herbert says: ==================== kcm: fix two syzcaller issues In this patch set: - Don't allow attaching non-TCP or listener sockets to a KCM mux. - In kcm_attach Check if sk_user_data is already set. This is under lock to avoid race conditions. More work is need to make all of the users of sk_user_data to use the same locking. - v2 Remove unncessary check for not PF_KCM in kcm_attach (suggested by Guillaume Nault) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 20:54:31 UTC
e557124 Tom Herbert 24 January 2018, 20:35:41 UTC kcm: Check if sk_user_data already set in kcm_attach This is needed to prevent sk_user_data being overwritten. The check is done under the callback lock. This should prevent a socket from being attached twice to a KCM mux. It also prevents a socket from being attached for other use cases of sk_user_data as long as the other cases set sk_user_data under the lock. Followup work is needed to unify all the use cases of sk_user_data to use the same locking. Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 20:54:30 UTC
581e722 Tom Herbert 24 January 2018, 20:35:40 UTC kcm: Only allow TCP sockets to be attached to a KCM mux TCP sockets for IPv4 and IPv6 that are not listeners or in closed stated are allowed to be attached to a KCM mux. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 20:54:30 UTC
3eab2ad James Morris 24 January 2018, 20:53:57 UTC MAINTAINERS: update email address for James Morris Update my email address. Signed-off-by: James Morris <jmorris@namei.org> 24 January 2018, 20:53:57 UTC
d3303a6 Wolfgang Bumiller 18 January 2018, 10:32:36 UTC net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr TCF_LAYER_LINK and TCF_LAYER_NETWORK returned the same pointer as skb->data points to the network header. Use skb_mac_header instead. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 19:52:48 UTC
560a660 Wolfgang Bumiller 18 January 2018, 10:32:35 UTC net: sched: em_nbyte: don't add the data offset twice 'ptr' is shifted by the offset and then validated, the memcmp should not add it a second time. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 19:52:40 UTC
e4fd493 Josef Bacik 23 January 2018, 20:17:05 UTC Btrfs: fix stale entries in readdir In fixing the readdir+pagefault deadlock I accidentally introduced a stale entry regression in readdir. If we get close to full for the temporary buffer, and then skip a few delayed deletions, and then try to add another entry that won't fit, we will emit the entries we found and retry. Unfortunately we delete entries from our del_list as we find them, assuming we won't need them. However our pos will be with whatever our last entry was, which could be before the delayed deletions we skipped, so the next search will add the deleted entries back into our readdir buffer. So instead don't delete entries we find in our del_list so we can make sure we always find our delayed deletions. This is a slight perf hit for readdir with lots of pending deletions, but hopefully this isn't a common occurrence. If it is we can revist this and optimize it. cc: stable@vger.kernel.org Fixes: 23b5ec74943f ("btrfs: fix readdir deadlock with pagefault") Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> 24 January 2018, 19:27:48 UTC
03fae44 Linus Torvalds 24 January 2018, 18:08:16 UTC Merge tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "With the new ORC unwinder, ftrace stack tracing became disfunctional. One was that ORC didn't know how to handle the ftrace callbacks in general (which Josh fixed). The other was that ORC would just bail if it hit a dynamically allocated trampoline. Which means all ftrace stack tracing that happens from the function tracer would produce no results (that includes killing the max stack size tracer). I added a check to the ORC unwinder to see if the trampoline belonged to ftrace, and if it did, use the orc entry of the static trampoline that was used to create the dynamic one (it would be identical). Finally, I noticed that the skip values of the stack tracing were out of whack. I went through and fixed them up" * tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Update stack trace skipping for ORC unwinder ftrace, orc, x86: Handle ftrace dynamically allocated trampolines x86/ftrace: Fix ORC unwinding from ftrace handlers 24 January 2018, 18:08:16 UTC
ce30f26 Willy Tarreau 04 January 2018, 13:31:25 UTC MAINTAINERS: clarify that only verified bugs should be submitted to security@ We're seeing a raise of automated reports from testing tools and reports about address leaks that are not really exploitable as-is, many of which do not represent an immediate risk justifying to work in closed places. Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 January 2018, 18:05:53 UTC
5132ede Greg Kroah-Hartman 24 January 2018, 14:28:17 UTC Revert "module: Add retpoline tag to VERMAGIC" This reverts commit 6cfb521ac0d5b97470883ff9b7facae264b7ab12. Turns out distros do not want to make retpoline as part of their "ABI", so this patch should not have been merged. Sorry Andi, this was my fault, I suggested it when your original patch was the "correct" way of doing this instead. Reported-by: Jiri Kosina <jikos@kernel.org> Fixes: 6cfb521ac0d5 ("module: Add retpoline tag to VERMAGIC") Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 January 2018, 17:00:05 UTC
1ecdaea Yuval Mintz 24 January 2018, 09:02:09 UTC mlxsw: spectrum_router: Don't log an error on missing neighbor Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca11b9 ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 15:58:22 UTC
97edf7c David S. Miller 24 January 2018, 15:32:29 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-01-24 1) Only offloads SAs after they are fully initialized. Otherwise a NIC may receive packets on a SA we can not yet handle in the stack. From Yossi Kuperman. 2) Fix negative refcount in case of a failing offload. From Aviad Yehezkel. 3) Fix inner IP ptoro version when decapsulating from interaddress family tunnels. From Yossi Kuperman. 4) Use true or false for boolean variables instead of an integer value in xfrm_get_type_offload. From Gustavo A. R. Silva. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 15:32:29 UTC
bda646d Radim Krčmář 24 January 2018, 15:25:53 UTC Merge tag 'kvm-s390-master-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux KVM: s390: another fix for cmma migration This fixes races and potential use after free in the cmma migration code. 24 January 2018, 15:25:53 UTC
1de1ea7 Christian Borntraeger 22 December 2017, 09:54:20 UTC KVM: s390: add proper locking for CMMA migration bitmap Some parts of the cmma migration bitmap is already protected with the kvm->lock (e.g. the migration start). On the other hand the read of the cmma bits is not protected against a concurrent free, neither is the emulation of the ESSA instruction. Let's extend the locking to all related ioctls by using the slots lock for - kvm_s390_vm_start_migration - kvm_s390_vm_stop_migration - kvm_s390_set_cmma_bits - kvm_s390_get_cmma_bits In addition to that, we use synchronize_srcu before freeing the migration structure as all users hold kvm->srcu for read. (e.g. the ESSA handler). Reported-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # 4.13+ Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode) Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> 24 January 2018, 14:22:51 UTC
1d080f0 Borislav Petkov 23 January 2018, 10:41:33 UTC x86/microcode: Fix again accessing initrd after having been freed Commit 24c2503255d3 ("x86/microcode: Do not access the initrd after it has been freed") fixed attempts to access initrd from the microcode loader after it has been freed. However, a similar KASAN warning was reported (stack trace edited): smpboot: Booting Node 0 Processor 1 APIC 0x11 ================================================================== BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50 Read of size 1 at addr ffff880035ffd000 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7 Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016 Call Trace: dump_stack print_address_description kasan_report ? find_cpio_data __asan_report_load1_noabort find_cpio_data find_microcode_in_initrd __load_ucode_amd load_ucode_amd_ap load_ucode_ap After some investigation, it turned out that a merge was done using the wrong side to resolve, leading to picking up the previous state, before the 24c2503255d3 fix. Therefore the Fixes tag below contains a merge commit. Revert the mismerge by catching the save_microcode_in_initrd_amd() retval and thus letting the function exit with the last return statement so that initrd_gone can be set to true. Fixes: f26483eaedec ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts") Reported-by: <higuita@gmx.net> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=198295 Link: https://lkml.kernel.org/r/20180123104133.918-2-bp@alien8.de 24 January 2018, 12:00:35 UTC
7e702d1 Jia Zhang 23 January 2018, 10:41:32 UTC x86/microcode/intel: Extend BDW late-loading further with LLC size check Commit b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check") reduced the impact of erratum BDF90 for Broadwell model 79. The impact can be reduced further by checking the size of the last level cache portion per core. Tony: "The erratum says the problem only occurs on the large-cache SKUs. So we only need to avoid the update if we are on a big cache SKU that is also running old microcode." For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. Fixes: b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.com 24 January 2018, 12:00:35 UTC
40d4071 Xiao Liang 22 January 2018, 06:12:52 UTC perf/x86/amd/power: Do not load AMD power module on !AMD platforms The AMD power module can be loaded on non AMD platforms, but unload fails with the following Oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: __list_del_entry_valid+0x29/0x90 Call Trace: perf_pmu_unregister+0x25/0xf0 amd_power_pmu_exit+0x1c/0xd23 [power] SyS_delete_module+0x1a8/0x2b0 ? exit_to_usermode_loop+0x8f/0xb0 entry_SYSCALL_64_fastpath+0x20/0x83 Return -ENODEV instead of 0 from the module init function if the CPU does not match. Fixes: c7ab62bfbe0e ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism") Signed-off-by: Xiao Liang <xiliang@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180122061252.6394-1-xiliang@redhat.com 24 January 2018, 12:00:35 UTC
1df3738 Waiman Long 22 January 2018, 22:09:34 UTC x86/retpoline: Remove the esp/rsp thunk It doesn't make sense to have an indirect call thunk with esp/rsp as retpoline code won't work correctly with the stack pointer register. Removing it will help compiler writers to catch error in case such a thunk call is emitted incorrectly. Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support") Suggested-by: Jeff Law <law@redhat.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Kees Cook <keescook@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1516658974-27852-1-git-send-email-longman@redhat.com 24 January 2018, 11:31:55 UTC
ce48c14 Peter Zijlstra 22 January 2018, 21:53:28 UTC sched/core: Fix cpu.max vs. cpuhotplug deadlock Tejun reported the following cpu-hotplug lock (percpu-rwsem) read recursion: tg_set_cfs_bandwidth() get_online_cpus() cpus_read_lock() cfs_bandwidth_usage_inc() static_key_slow_inc() cpus_read_lock() Reported-by: Tejun Heo <tj@kernel.org> Tested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180122215328.GP3397@worktop Signed-off-by: Ingo Molnar <mingo@kernel.org> 24 January 2018, 09:03:44 UTC
88f1c87 Tejun Heo 22 January 2018, 22:00:55 UTC locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks() debug_show_all_locks() iterates all tasks and print held locks whole holding tasklist_lock. This can take a while on a slow console device and may end up triggering NMI hardlockup detector if someone else ends up waiting for tasklist_lock. Touch the NMI watchdog while printing the held locks to avoid spuriously triggering the hardlockup detector. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20180122220055.GB1771050@devbig577.frc2.facebook.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 24 January 2018, 09:00:09 UTC
a97cb0e Peter Zijlstra 22 January 2018, 10:39:47 UTC futex: Fix OWNER_DEAD fixup Both Geert and DaveJ reported that the recent futex commit: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") introduced a problem with setting OWNER_DEAD. We set the bit on an uninitialized variable and then entirely optimize it away as a dead-store. Move the setting of the bit to where it is more useful. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") Link: http://lkml.kernel.org/r/20180122103947.GD2228@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> 24 January 2018, 08:58:18 UTC
848b159 Neil Horman 22 January 2018, 21:06:37 UTC vmxnet3: repair memory leak with the introduction of commit b0eb57cb97e7837ebb746404c2c58c6f536f23fa, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 00:57:52 UTC
e9191ff Ben Hutchings 22 January 2018, 20:06:42 UTC ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 00:53:24 UTC
02612bb Guillaume Nault 22 January 2018, 17:06:37 UTC pppoe: take ->needed_headroom of lower device into account on xmit In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 January 2018, 00:44:44 UTC
2ee5b92 Steven Rostedt (VMware) 23 January 2018, 18:25:04 UTC tracing: Update stack trace skipping for ORC unwinder With the addition of ORC unwinder and FRAME POINTER unwinder, the stack trace skipping requirements have changed. I went through the tracing stack trace dumps with ORC and with frame pointers and recalculated the proper values. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 23 January 2018, 20:57:00 UTC
6be7fa3 Steven Rostedt (VMware) 23 January 2018, 03:32:51 UTC ftrace, orc, x86: Handle ftrace dynamically allocated trampolines The function tracer can create a dynamically allocated trampoline that is called by the function mcount or fentry hook that is used to call the function callback that is registered. The problem is that the orc undwinder will bail if it encounters one of these trampolines. This breaks the stack trace of function callbacks, which include the stack tracer and setting the stack trace for individual functions. Since these dynamic trampolines are basically copies of the static ftrace trampolines defined in ftrace_*.S, we do not need to create new orc entries for the dynamic trampolines. Finding the return address on the stack will be identical as the functions that were copied to create the dynamic trampolines. When encountering a ftrace dynamic trampoline, we can just use the orc entry of the ftrace static function that was copied for that trampoline. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 23 January 2018, 20:56:55 UTC
1f07476 Linus Torvalds 23 January 2018, 20:45:40 UTC Merge tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix AMD regression due to not re-enabling the big window on resume (Christian König)" * tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Enable AMD 64-bit window on resume 23 January 2018, 20:45:40 UTC
e2ac83d Josh Poimboeuf 23 January 2018, 04:07:46 UTC x86/ftrace: Fix ORC unwinding from ftrace handlers Steven Rostedt discovered that the ftrace stack tracer is broken when it's used with the ORC unwinder. The problem is that objtool is instructed by the Makefile to ignore the ftrace_64.S code, so it doesn't generate any ORC data for it. Fix it by making the asm code objtool-friendly: - Objtool doesn't like the fact that save_mcount_regs pushes RBP at the beginning, but it's never restored (directly, at least). So just skip the original RBP push, which is only needed for frame pointers anyway. - Annotate some functions as normal callable functions with ENTRY/ENDPROC. - Add an empty unwind hint to return_to_handler(). The return address isn't on the stack, so there's nothing ORC can do there. It will just punt in the unlikely case it tries to unwind from that code. With all that fixed, remove the OBJECT_FILES_NON_STANDARD Makefile annotation so objtool can read the file. Link: http://lkml.kernel.org/r/20180123040746.ih4ep3tk4pbjvg7c@treble Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 23 January 2018, 18:24:19 UTC
a84a8ab Linus Torvalds 23 January 2018, 16:52:55 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix divide by zero in mlx5, from Talut Batheesh. 2) Guard against invalid GSO packets coming from untrusted guests and arriving in qdisc_pkt_len_init(), from Eric Dumazet. 3) Similarly add such protection to the various protocol GSO handlers. From Willem de Bruijn. 4) Fix regression added to IGMP source address checking for IGMPv3 reports, from Felix Feitkau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tls: Correct length of scatterlist in tls_sw_sendpage be2net: restore properly promisc mode after queues reconfiguration net: igmp: fix source address check for IGMPv3 reports gso: validate gso_type in GSO handlers net: qdisc_pkt_len_init() should be more robust ibmvnic: Allocate and request vpd in init_resources ibmvnic: Revert to previous mtu when unsupported value requested ibmvnic: Modify buffer size and number of queues on failover rds: tcp: compute m_ack_seq as offset from ->write_seq usbnet: silence an unnecessary warning cxgb4: fix endianness for vlan value in cxgb4_tc_flower cxgb4: set filter type to 1 for ETH_P_IPV6 net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare 23 January 2018, 16:52:55 UTC
545d8ae Gustavo A. R. Silva 22 January 2018, 22:34:09 UTC xfrm: fix boolean assignment in xfrm_get_type_offload Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Fixes: ffdb5211da1c ("xfrm: Auto-load xfrm offload modules") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> 23 January 2018, 09:56:36 UTC
5efec5c Yossi Kuperman 22 January 2018, 22:16:21 UTC xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version IPSec tunnel mode supports encapsulation of IPv4 over IPv6 and vice-versa. The outer IP header is stripped and the inner IP inherits the original Ethernet header. Tcpdump fails to properly decode the inner packet in case that h_proto is different than the inner IP version. Fix h_proto to reflect the inner IP version. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> 23 January 2018, 09:56:36 UTC
1995266 Ben Hutchings 22 January 2018, 20:11:06 UTC nfsd: auth: Fix gid sorting when rootsquash enabled Commit bdcf0a423ea1 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a423ea1 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 January 2018, 04:13:07 UTC
2a924d7 Dmitry Torokhov 05 January 2018, 21:28:47 UTC Input: trackpoint - only expose supported controls for Elan, ALPS and NXP The newer trackpoints from ALPS, Elan and NXP implement a very limited subset of extended commands and controls that the original trackpoints implemented, so we should not be exposing not working controls in sysfs. The newer trackpoints also do not implement "Power On Reset" or "Read Extended Button Status", so we should not be using these commands during initialization. While we are at it, let's change "unsigned char" to u8 for byte data or bool for booleans and use better suited error codes instead of -1. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 23 January 2018, 00:24:36 UTC
f5d07b9 Aaron Ma 19 January 2018, 17:43:39 UTC Input: trackpoint - force 3 buttons if 0 button is reported Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands. They supposed to reply with 0x02, 0x03, or 0x04 in response to the "Read Extended ID" command, so we would know not to try certain extended commands. Unfortunately even some trackpoints reporting the original IBM version (0x01 firmware 0x0e) now respond with incorrect data to the "Get Extended Buttons" command: thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0 Since there are no trackpoints without buttons, let's assume the trackpoint has 3 buttons when we get 0 response to the extended buttons query. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 23 January 2018, 00:23:17 UTC
a0ec1de Martin Brandenburg 22 January 2018, 20:44:52 UTC orangefs: initialize op on loop restart in orangefs_devreq_read In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 January 2018, 21:51:14 UTC
0afc0de Martin Brandenburg 22 January 2018, 20:44:51 UTC orangefs: use list_for_each_entry_safe in purge_waiting_ops set_op_state_purged can delete the op. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 January 2018, 21:51:14 UTC
7a8c4dd Dave Watson 19 January 2018, 20:30:13 UTC tls: Correct length of scatterlist in tls_sw_sendpage The scatterlist is reused by both sendmsg and sendfile. If a sendmsg of smaller number of pages is followed by a sendfile of larger number of pages, the scatterlist may be too short, resulting in a crash in gcm_encrypt. Add sg_unmark_end to make the list the correct length. tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates memory in alloc_sg, or in zerocopy_from_iter. Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 21:25:21 UTC
52acf06 Ivan Vecera 19 January 2018, 19:23:50 UTC be2net: restore properly promisc mode after queues reconfiguration The commit 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 21:22:42 UTC
ad23b75 Felix Fietkau 19 January 2018, 10:50:46 UTC net: igmp: fix source address check for IGMPv3 reports Commit "net: igmp: Use correct source address on IGMPv3 reports" introduced a check to validate the source address of locally generated IGMPv3 packets. Instead of checking the local interface address directly, it uses inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the local subnet (or equal to the point-to-point address if used). This breaks for point-to-point interfaces, so check against ifa->ifa_local directly. Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 21:16:05 UTC
121d57a Willem de Bruijn 19 January 2018, 14:29:18 UTC gso: validate gso_type in GSO handlers Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017accff61 ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 21:01:30 UTC
7c68d1a Eric Dumazet 19 January 2018, 03:59:19 UTC net: qdisc_pkt_len_init() should be more robust Without proper validation of DODGY packets, we might very well feed qdisc_pkt_len_init() with invalid GSO packets. tcp_hdrlen() might access out-of-bound data, so let's use skb_header_pointer() and proper checks. Whole story is described in commit d0c081b49137 ("flow_dissector: properly cap thoff field") We have the goal of validating DODGY packets earlier in the stack, so we might very well revert this fix in the future. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jason Wang <jasowang@redhat.com> Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 21:00:05 UTC
18b0aff David S. Miller 22 January 2018, 20:46:56 UTC Merge branch 'ibmvnic-reset-behavior-fixes' John Allen says: ==================== ibmvnic: Reset behavior fixes This patchset fixes a number of issues related to ibmvnic reset uncovered from testing new Power9 machines with Everglades adapters and the new functionality to change mtu and other parameters in the driver. Changes since v1: -In patch 1/3, added the line to free the long term buffers before allocating a new one. This change inadvertently uncovered the problem that the number of queues can change after a failover as well. To fix this, we check whether or not the number of queues has changed in do_reset and if they have, we do a full release and init of the queues. -In patch 1/3, added variables to the adapter struct to track how many rx/tx pools have actually been allocated and modify the release pools routines to use these values rather than the possibly incorrect req_rx/tx_queues values. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:46:56 UTC
69d08dc John Allen 18 January 2018, 22:27:58 UTC ibmvnic: Allocate and request vpd in init_resources In reset events in which our memory allocations need to be reallocated, VPD data is being freed, but never reallocated. This can cause issues if we later attempt to access that memory or reset and attempt to free the memory. This patch moves the allocation of the VPD data to init_resources so that it will be symmetrically freed during release resources. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:46:55 UTC
e791380 John Allen 18 January 2018, 22:27:12 UTC ibmvnic: Revert to previous mtu when unsupported value requested If we request an unsupported mtu value, the vnic server will suggest a different value. Currently we take the suggested value without question and login with that value. However, the behavior doesn't seem completely sane as attempting to change the mtu to some specific value will change the mtu to some completely different value most of the time. This patch fixes the issue by logging in with the previously used mtu value and printing an error message saying that the given mtu is unsupported. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:46:55 UTC
896d869 John Allen 18 January 2018, 22:26:31 UTC ibmvnic: Modify buffer size and number of queues on failover Using newer backing devices can cause the required padding at the end of buffer as well as the number of queues to change after a failover. Since we currently assume that these values never change, after a failover to a backing device with different capabilities, we can get errors from the vnic server, attempt to free long term buffers that are no longer there, or not free long term buffers that should be freed. This patch resolves the issue by checking whether any of these values change, and if so perform the necessary re-allocations. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:46:55 UTC
b589513 Sowmini Varadhan 18 January 2018, 21:11:07 UTC rds: tcp: compute m_ack_seq as offset from ->write_seq rds-tcp uses m_ack_seq to track the tcp ack# that indicates that the peer has received a rds_message. The m_ack_seq is used in rds_tcp_is_acked() to figure out when it is safe to drop the rds_message from the RDS retransmit queue. The m_ack_seq must be calculated as an offset from the right edge of the in-flight tcp buffer, i.e., it should be based on the ->write_seq, not the ->snd_nxt. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:43:54 UTC
ab18a9c Oliver Neukum 17 January 2018, 15:33:54 UTC usbnet: silence an unnecessary warning That a kevent could not be scheduled is not an error. Such handlers must be able to deal with multiple events anyway. As the successful scheduling of a work is a debug event, make the failure debug priority, too. V2: coding style Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Cristian Caravena <caravena@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:32:09 UTC
affee5e David S. Miller 22 January 2018, 20:26:57 UTC Merge branch 'cxgb4-tc-flower-offload-fixes' Daniel Borkmann says: ==================== pull-request: bpf 2018-01-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a divide by zero due to wrong if (src_reg == 0) check in 64-bit mode. Properly handle this in interpreter and mask it also generically in verifier to guard against similar checks in JITs, from Eric and Alexei. 2) Fix a bug in arm64 JIT when tail calls are involved and progs have different stack sizes, from Daniel. 3) Reject stores into BPF context that are not expected BPF_STX | BPF_MEM variant, from Daniel. 4) Mark dst reg as unknown on {s,u}bounds adjustments when the src reg has derived bounds from dead branches, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:26:57 UTC
100d39a Kumar Sanghvi 17 January 2018, 06:43:34 UTC cxgb4: fix endianness for vlan value in cxgb4_tc_flower Don't change endianness when assigning vlan value in cxgb4_tc_flower code when processing flow match parameters. The value gets converted to network order as part of filtering code in set_filter_wr. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:26:57 UTC
d728f13 Kumar Sanghvi 17 January 2018, 06:43:33 UTC cxgb4: set filter type to 1 for ETH_P_IPV6 For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower code when processing flow match parameters. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 January 2018, 20:26:56 UTC
7222708 Kirill A. Shutemov 22 January 2018, 09:22:30 UTC mm, page_vma_mapped: Introduce pfn_in_hpage() The new helper would check if the pfn belongs to the page. For huge pages it checks if the PFN is within range covered by the huge page. The helper is used in check_pte(). The original code the helper replaces had two call to page_to_pfn(). page_to_pfn() is relatively costly. Although current GCC is able to optimize code to have one call, it's better to do this explicitly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 January 2018, 20:15:57 UTC
e5c9c6a Mark Furneaux 22 January 2018, 19:24:17 UTC Input: xpad - add support for PDP Xbox One controllers Adds support for the current lineup of Xbox One controllers from PDP (Performance Designed Products). These controllers are very picky with their initialization sequence and require an additional 2 packets before they send any input reports. Signed-off-by: Mark Furneaux <mark@furneaux.ca> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 22 January 2018, 19:33:40 UTC
f30fefd Andi Shyti 22 January 2018, 19:23:27 UTC Input: stmfts,s6sy671 - add SPDX identifier Replace the original license statement with the SPDX identifier. Update also the copyright owner adding myself as co-owner of the copyright. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 22 January 2018, 19:32:16 UTC
0d665e7 Kirill A. Shutemov 19 January 2018, 12:49:24 UTC mm, page_vma_mapped: Drop faulty pointer arithmetics in check_pte() Tetsuo reported random crashes under memory pressure on 32-bit x86 system and tracked down to change that introduced page_vma_mapped_walk(). The root cause of the issue is the faulty pointer math in check_pte(). As ->pte may point to an arbitrary page we have to check that they are belong to the section before doing math. Otherwise it may lead to weird results. It wasn't noticed until now as mem_map[] is virtually contiguous on flatmem or vmemmap sparsemem. Pointer arithmetic just works against all 'struct page' pointers. But with classic sparsemem, it doesn't because each section memap is allocated separately and so consecutive pfns crossing two sections might have struct pages at completely unrelated addresses. Let's restructure code a bit and replace pointer arithmetic with operations on pfns. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 January 2018, 01:44:47 UTC
e58edaa Talat Batheesh 21 January 2018, 03:30:42 UTC net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare Helmut reported a bug about division by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is division by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2fc48f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by: Helmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 January 2018, 23:06:33 UTC
back to top