Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
30a7acd Linus Torvalds 31 December 2017, 22:47:43 UTC Linux 4.15-rc6 31 December 2017, 22:47:43 UTC
f39d7d7 Linus Torvalds 31 December 2017, 21:13:56 UTC Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixlets for x86: - Fix the ESPFIX double fault handling for 5-level pagetables - Fix the commandline parsing for 'apic=' on 32bit systems and update documentation - Make zombie stack traces reliable - Fix kexec with stack canary - Fix the delivery mode for APICs which was missed when the x86 vector management was converted to single target delivery. Caused a regression due to the broken hardware which ignores affinity settings in lowest prio delivery mode. - Unbreak modules when AMD memory encryption is enabled - Remove an unused parameter of prepare_switch_to" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Switch all APICs to Fixed delivery mode x86/apic: Update the 'apic=' description of setting APIC driver x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR) x86: Remove unused parameter of prepare_switch_to x86/stacktrace: Make zombie stack traces reliable x86/mm: Unbreak modules that use the DMA API x86/build: Make isoimage work on Debian x86/espfix/64: Fix espfix double-fault handling on 5-level systems 31 December 2017, 21:13:56 UTC
52c90f2 Linus Torvalds 31 December 2017, 21:03:05 UTC Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation fixes from Thomas Gleixner: "Four patches addressing the PTI fallout as discussed and debugged yesterday: - Remove stale and pointless TLB flush invocations from the hotplug code - Remove stale preempt_disable/enable from __native_flush_tlb() - Plug the memory leak in the write_ldt() error path" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Make LDT pgtable free conditional x86/ldt: Plug memory leak in error path x86/mm: Remove preempt_disable/enable() from __native_flush_tlb() x86/smpboot: Remove stale TLB flush invocations 31 December 2017, 21:03:05 UTC
cea92e8 Linus Torvalds 31 December 2017, 20:30:34 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A pile of fixes for long standing issues with the timer wheel and the NOHZ code: - Prevent timer base confusion accross the nohz switch, which can cause unlocked access and data corruption - Reinitialize the stale base clock on cpu hotplug to prevent subtle side effects including rollovers on 32bit - Prevent an interrupt storm when the timer softirq is already pending caused by tick_nohz_stop_sched_tick() - Move the timer start tracepoint to a place where it actually makes sense - Add documentation to timerqueue functions as they caused confusion several times now" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timerqueue: Document return values of timerqueue_add/del() timers: Invoke timer_start_debug() where it makes sense nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick() timers: Reinitialize per cpu bases on hotplug timers: Use deferrable base independent of base::nohz_active 31 December 2017, 20:30:34 UTC
8d517bd Linus Torvalds 31 December 2017, 20:29:02 UTC Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp fixlet from Thomas Gleixner: "A trivial build warning fix for newer compilers" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Move inline keyword at the beginning of declaration 31 December 2017, 20:29:02 UTC
4c47031 Linus Torvalds 31 December 2017, 20:27:19 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Three patches addressing the fallout of the CPU_ISOLATION changes especially with NO_HZ_FULL plus documentation of boot parameter dependency" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION 31 December 2017, 20:27:19 UTC
e7c632f Linus Torvalds 31 December 2017, 19:47:24 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: - plug a memory leak in the intel pmu init code - clang fixes - tooling fix to avoid including kernel headers - a fix for jvmti to generate correct debug information for inlined code - replace backtick with a regular shell function - fix the build in hardened environments * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Plug memory leak in intel_pmu_init() x86/asm: Allow again using asm.h when building for the 'bpf' clang target tools arch s390: Do not include header files from the kernel sources perf jvmti: Generate correct debug information for inlined code perf tools: Fix up build in hardened environments perf tools: Use shell function for perl cflags retrieval 31 December 2017, 19:47:24 UTC
88fa025 Linus Torvalds 31 December 2017, 19:23:11 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A rather large update after the kaisered maintainer finally found time to handle regression reports. - The larger part addresses a regression caused by the x86 vector management rework. The reservation based model does not work reliably for MSI interrupts, if they cannot be masked (yes, yet another hw engineering trainwreck). The reason is that the reservation mode assigns a dummy vector when the interrupt is allocated and switches to a real vector when the interrupt is requested. If the MSI entry cannot be masked then the initialization might raise an interrupt before the interrupt is requested, which ends up as spurious interrupt and causes device malfunction and worse. The fix is to exclude MSI interrupts which do not support masking from reservation mode and assign a real vector right away. - Extend the extra lockdep class setup for nested interrupts with a class for the recently added irq_desc::request_mutex so lockdep can differeniate and does not emit false positive warnings. - A ratelimit guard for the bad irq printout so in case a bad irq comes back immediately the system does not drown in dmesg spam" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI genirq/irqdomain: Rename early argument of irq_domain_activate_irq() x86/vector: Use IRQD_CAN_RESERVE flag genirq: Introduce IRQD_CAN_RESERVE flag genirq/msi: Handle reactivation only on success gpio: brcmstb: Make really use of the new lockdep class genirq: Guard handle_bad_irq log messages kernel/irq: Extend lockdep class for request mutex 31 December 2017, 19:23:11 UTC
31336ed Linus Torvalds 31 December 2017, 18:57:10 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Thomas Gleixner: "Three fixlets for objtool: - Address two segfaults related to missing parameter and clang objects - Make it compile clean with clang" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with clang-compiled objects objtool: Fix seg fault caused by missing parameter objtool: Fix Clang enum conversion warning 31 December 2017, 18:57:10 UTC
8371e5a Linus Torvalds 31 December 2017, 18:52:51 UTC Merge tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are six small fixes of some of the char/misc drivers that have been sent in to resolve reported issues. Nothing major, a binder use-after-free fix, some thunderbolt bugfixes, a hyper-v bugfix, and an nvmem driver fix. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: meson-mx-efuse: fix reading from an offset other than 0 binder: fix proc->files use-after-free vmbus: unregister device_obj->channels_kset thunderbolt: Mask ring interrupt properly when polling starts MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry thunderbolt: Make pathname to force_power shorter 31 December 2017, 18:52:51 UTC
4288e6b Linus Torvalds 31 December 2017, 18:50:05 UTC Merge tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two driver core fixes for 4.15-rc6, resolving some reported issues. The first is a cacheinfo fix for DT based systems to resolve a reported issue that has been around for a while, and the other is to resolve a regression in the kobject uevent code that showed up in 4.15-rc1. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: fix suppressing modalias in uevents delivered over netlink drivers: base: cacheinfo: fix cache type for non-architected system cache 31 December 2017, 18:50:05 UTC
29a9b00 Linus Torvalds 31 December 2017, 18:48:09 UTC Merge tag 'staging-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.15-rc6 The first resolves a bug in the lustre driver that came about due to a broken cleanup patch, due to crazy list usage in that codebase. The remaining two are ion driver fixes, finally getting the CMA interaction to work properly, resolving two regressions in that area of the code. All have been in linux-next with no reported issues for a while" * tag 'staging-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device staging: ion: Fix ion_cma_heap allocations staging: lustre: lnet: Fix recent breakage from list_for_each conversion 31 December 2017, 18:48:09 UTC
bc7236f Linus Torvalds 31 December 2017, 18:46:07 UTC Merge tag 'tty-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY fix from Greg KH: "Here is a single tty fix for a reported issue that you wrote the patch for :) It's been in linux-next for a week or so with no reported issues" * tag 'tty-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD) 31 December 2017, 18:46:07 UTC
a9746e4 Linus Torvalds 31 December 2017, 18:44:00 UTC Merge tag 'usb-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.15-rc6. Nothing major, but there are a number of regression fixes in here that resolve issues that have been reported a bunch. There are also the usual xhci fixes as well as a number of new usb serial device ids. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 xhci: Fix use-after-free in xhci debugfs xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate USB: serial: ftdi_sio: add id for Airbus DS P8GR usb: Add device quirk for Logitech HD Pro Webcam C925e usb: add RESET_RESUME for ELSA MicroLink 56K usbip: fix usbip bind writing random string after command in match_busid usbip: stub_rx: fix static checker warning on unnecessary checks usbip: prevent leaking socket pointer address in messages usbip: stub: stop printing kernel pointer addresses in messages usbip: vhci: stop printing kernel pointer addresses in messages USB: Fix off by one in type-specific length check of BOS SSP capability USB: serial: option: adding support for YUGA CLM920-NC5 phy: rcar-gen3-usb2: select USB_COMMON phy: rockchip-typec: add pm_runtime_disable in err case phy: cpcap-usb: Fix platform_get_irq_byname's error checking. phy: tegra: fix device-tree node lookups USB: serial: qcserial: add Sierra Wireless EM7565 USB: serial: option: add support for Telit ME910 PID 0x1101 USB: chipidea: msm: fix ulpi-node lookup 31 December 2017, 18:44:00 UTC
c0b2390 Adam Borowski 25 December 2017, 15:38:58 UTC MAINTAINERS: mark arch/blackfin/ and its gubbins as orphaned The blackfin architecture has seen no maintainer action of any kind since April 2015. No new code, no pull requests, no acks to patches, no response to mails, nothing. The web site has an expired certificate (expiration Sep 2017, issued in 2013), the mailing list sees no answers either, with one exception: https://sourceforge.net/p/adi-buildroot/mailman/adi-buildroot-devel/ > > Steven is no longer working on this for ADI. Acked by me if this works. Thanks. > > Best regards, > Aaron Wu > Analog Devices Inc. But, Aaron doesn't seem to respond to queries either. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 31 December 2017, 18:42:49 UTC
6bba94d Linus Torvalds 31 December 2017, 18:39:22 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc bugfix from David Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: repair calling incorrect hweight function from stubs 31 December 2017, 18:39:22 UTC
7f41419 Thomas Gleixner 31 December 2017, 15:52:15 UTC x86/ldt: Make LDT pgtable free conditional Andy prefers to be paranoid about the pagetable free in the error path of write_ldt(). Make it conditional and warn whenever the installment of a secondary LDT fails. Requested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 31 December 2017, 15:55:09 UTC
a62d698 Thomas Gleixner 31 December 2017, 10:24:34 UTC x86/ldt: Plug memory leak in error path The error path in write_ldt() tries to free 'old_ldt' instead of the newly allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a half populated LDT pagetable, which is not a leak as it gets cleaned up when the process exits. Free both the potentially half populated LDT pagetable and the newly allocated LDT struct. This can be done unconditionally because once an LDT is mapped subsequent maps will succeed, because the PTE page is already populated and the two LDTs fit into that single page. Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 December 2017, 11:14:07 UTC
decab08 Thomas Gleixner 30 December 2017, 21:13:54 UTC x86/mm: Remove preempt_disable/enable() from __native_flush_tlb() The preempt_disable/enable() pair in __native_flush_tlb() was added in commit: 5cf0791da5c1 ("x86/mm: Disable preemption during CR3 read+write") ... to protect the UP variant of flush_tlb_mm_range(). That preempt_disable/enable() pair should have been added to the UP variant of flush_tlb_mm_range() instead. The UP variant was removed with commit: ce4a4e565f52 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code") ... but the preempt_disable/enable() pair stayed around. The latest change to __native_flush_tlb() in commit: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches") ... added an access to a per CPU variable outside the preempt disabled regions, which makes no sense at all. __native_flush_tlb() must always be called with at least preemption disabled. Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch bad callers independent of the smp_processor_id() debugging. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171230211829.679325424@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 December 2017, 11:12:51 UTC
322f8b8 Thomas Gleixner 30 December 2017, 21:13:53 UTC x86/smpboot: Remove stale TLB flush invocations smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 December 2017, 11:12:51 UTC
71ee203 Linus Torvalds 30 December 2017, 22:31:30 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes, both of which cause I/O hangs. The storvsc one is from the hyper-v which can hang under certain hot add/remove conditions and the other is generally, where removing a target and a device in close proximity can result in the release method being executed twice (and subsequent list and other corruption and an eventual panic)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error scsi: core: check for device state in __scsi_remove_target() 30 December 2017, 22:31:30 UTC
ce90aaf Simon Ser 30 December 2017, 20:43:32 UTC objtool: Fix seg fault with clang-compiled objects Fix a seg fault which happens when an input file provided to 'objtool orc generate' doesn't have a '.shstrtab' section (for instance, object files produced by clang don't have this section). Signed-off-by: Simon Ser <contact@emersion.fr> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 30 December 2017, 21:04:17 UTC
d89e426 Simon Ser 30 December 2017, 20:43:31 UTC objtool: Fix seg fault caused by missing parameter Fix a seg fault when no parameter is provided to 'objtool orc'. Signed-off-by: Simon Ser <contact@emersion.fr> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 30 December 2017, 21:04:17 UTC
efdd17f Linus Torvalds 30 December 2017, 18:16:51 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - two cosmetic fixes from Daniel Axtens and Hans de Goede - fix for I2C command mismatch fix for cp2112 driver from Eudean Sun * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: lower log level for unknown main item tags to warnings HID: holtekff: move MODULE_* parameters out of #ifdef block HID: cp2112: Fix I2C_BLOCK_DATA transactions 30 December 2017, 18:16:51 UTC
3ce120b Linus Torvalds 30 December 2017, 01:34:43 UTC kbuild: add '-fno-stack-check' to kernel build options It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by: Alexander Tsoy <alexander@tsoy.me> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2017, 17:38:03 UTC
5aa90a8 Linus Torvalds 30 December 2017, 01:02:49 UTC Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation updates from Thomas Gleixner: "This is the final set of enabling page table isolation on x86: - Infrastructure patches for handling the extra page tables. - Patches which map the various bits and pieces which are required to get in and out of user space into the user space visible page tables. - The required changes to have CR3 switching in the entry/exit code. - Optimizations for the CR3 switching along with documentation how the ASID/PCID mechanism works. - Updates to dump pagetables to cover the user space page tables for W+X scans and extra debugfs files to analyze both the kernel and the user space visible page tables The whole functionality is compile time controlled via a config switch and can be turned on/off on the command line as well" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/ldt: Make the LDT mapping RO x86/mm/dump_pagetables: Allow dumping current pagetables x86/mm/dump_pagetables: Check user space page table for WX pages x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy x86/mm/pti: Add Kconfig x86/dumpstack: Indicate in Oops whether PTI is configured and enabled x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming x86/mm: Use INVPCID for __native_flush_tlb_single() x86/mm: Optimize RESTORE_CR3 x86/mm: Use/Fix PCID to optimize user/kernel switches x86/mm: Abstract switching CR3 x86/mm: Allow flushing for future ASID switches x86/pti: Map the vsyscall page if needed x86/pti: Put the LDT in its own PGD if PTI is on x86/mm/64: Make a full PGD-entry size hole in the memory map x86/events/intel/ds: Map debug buffers in cpu_entry_area x86/cpu_entry_area: Add debugstore entries to cpu_entry_area x86/mm/pti: Map ESPFIX into user space x86/mm/pti: Share entry text PMD x86/entry: Align entry text section to PMD boundary ... 30 December 2017, 01:02:49 UTC
9f4533c Thomas Gleixner 22 December 2017, 14:51:15 UTC timerqueue: Document return values of timerqueue_add/del() The return values of timerqueue_add/del() are not documented in the kernel doc comment. Add proper documentation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: rt@linutronix.de Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/20171222145337.872681338@linutronix.de 29 December 2017, 22:13:10 UTC
fd45bb7 Thomas Gleixner 22 December 2017, 14:51:14 UTC timers: Invoke timer_start_debug() where it makes sense The timer start debug function is called before the proper timer base is set. As a consequence the trace data contains the stale CPU and flags values. Call the debug function after setting the new base and flags. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: rt@linutronix.de Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de 29 December 2017, 22:13:10 UTC
5d62c18 Thomas Gleixner 22 December 2017, 14:51:13 UTC nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick() The conditions in irq_exit() to invoke tick_nohz_irq_exit() which subsequently invokes tick_nohz_stop_sched_tick() are: if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) If need_resched() is not set, but a timer softirq is pending then this is an indication that the softirq code punted and delegated the execution to softirqd. need_resched() is not true because the current interrupted task takes precedence over softirqd. Invoking tick_nohz_irq_exit() in this case can cause an endless loop of timer interrupts because the timer wheel contains an expired timer, but softirqs are not yet executed. So it returns an immediate expiry request, which causes the timer to fire immediately again. Lather, rinse and repeat.... Prevent that by adding a check for a pending timer soft interrupt to the conditions in tick_nohz_stop_sched_tick() which avoid calling get_next_timer_interrupt(). That keeps the tick sched timer on the tick and prevents a repetitive programming of an already expired timer. Reported-by: Sebastian Siewior <bigeasy@linutronix.d> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos 29 December 2017, 22:13:10 UTC
26456f8 Thomas Gleixner 27 December 2017, 20:37:25 UTC timers: Reinitialize per cpu bases on hotplug The timer wheel bases are not (re)initialized on CPU hotplug. That leaves them with a potentially stale clk and next_expiry valuem, which can cause trouble then the CPU is plugged. Add a prepare callback which forwards the clock, sets next_expiry to far in the future and reset the control flags to a known state. Set base->must_forward_clk so the first timer which is queued will try to forward the clock to current jiffies. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos 29 December 2017, 22:13:09 UTC
ced6d5c Anna-Maria Gleixner 22 December 2017, 14:51:12 UTC timers: Use deferrable base independent of base::nohz_active During boot and before base::nohz_active is set in the timer bases, deferrable timers are enqueued into the standard timer base. This works correctly as long as base::nohz_active is false. Once it base::nohz_active is set and a timer which was enqueued before that is accessed the lock selector code choses the lock of the deferred base. This causes unlocked access to the standard base and in case the timer is removed it does not clear the pending flag in the standard base bitmap which causes get_next_timer_interrupt() to return bogus values. To prevent that, the deferrable timers must be enqueued in the deferrable base, even when base::nohz_active is not set. Those deferrable timers also need to be expired unconditional. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: rt@linutronix.de Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de 29 December 2017, 22:13:09 UTC
bc97623 Thomas Gleixner 29 December 2017, 09:47:22 UTC genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI The new reservation mode for interrupts assigns a dummy vector when the interrupt is allocated and assigns a real vector when the interrupt is requested. The reservation mode prevents vector pressure when devices with a large amount of queues/interrupts are initialized, but only a minimal subset of those queues/interrupts is actually used. This mode has an issue with MSI interrupts which cannot be masked. If the driver is not careful or the hardware emits an interrupt before the device irq is requestd by the driver then the interrupt ends up on the dummy vector as a spurious interrupt which can cause malfunction of the device or in the worst case a lockup of the machine. Change the logic for the reservation mode so that the early activation of MSI interrupts checks whether: - the device is a PCI/MSI device - the reservation mode of the underlying irqdomain is activated - PCI/MSI masking is globally enabled - the PCI/MSI device uses either MSI-X, which supports masking, or MSI with the maskbit supported. If one of those conditions is false, then clear the reservation mode flag in the irq data of the interrupt and invoke irq_domain_activate_irq() with the reserve argument cleared. In the x86 vector code, clear the can_reserve flag in the vector allocation data so a subsequent free_irq() won't create the same situation again. The interrupt stays assigned to a real vector until pci_disable_msi() is invoked and all allocations are undone. Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode") Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291406420.1899@nanos Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291409460.1899@nanos 29 December 2017, 20:13:05 UTC
702cb0a Thomas Gleixner 29 December 2017, 15:59:06 UTC genirq/irqdomain: Rename early argument of irq_domain_activate_irq() The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org 29 December 2017, 20:13:04 UTC
945f50a Thomas Gleixner 29 December 2017, 15:57:00 UTC x86/vector: Use IRQD_CAN_RESERVE flag Set the new CAN_RESERVE flag when the initial reservation for an interrupt happens. The flag is used in a subsequent patch to disable reservation mode for a certain class of MSI devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org 29 December 2017, 20:13:04 UTC
69790ba Thomas Gleixner 29 December 2017, 15:44:34 UTC genirq: Introduce IRQD_CAN_RESERVE flag Add a new flag to mark interrupts which can use reservation mode. This is going to be used in subsequent patches to disable reservation mode for a certain class of MSI devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org 29 December 2017, 20:13:04 UTC
da5dd9e Thomas Gleixner 29 December 2017, 09:42:10 UTC genirq/msi: Handle reactivation only on success When analyzing the fallout of the x86 vector allocation rework it turned out that the error handling in msi_domain_alloc_irqs() is broken. If MSI_FLAG_MUST_REACTIVATE is set for a MSI domain then it clears the activation flag for a successfully initialized msi descriptor. If a subsequent initialization fails then the error handling code path does not deactivate the interrupt because the activation flag got cleared. Move the clearing of the activation flag outside of the initialization loop so that an eventual failure can be cleaned up correctly. Fixes: 22d0b12f3560 ("genirq/irqdomain: Add force reactivation flag to irq domains") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org 29 December 2017, 20:13:04 UTC
6123358 Linus Torvalds 29 December 2017, 19:54:15 UTC Merge tag 'pm-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "This fixes a schedutil cpufreq governor regression from the 4.14 cycle that may cause a CPU idleness check to return incorrect results in some cases which leads to suboptimal decisions (Joel Fernandes)" * tag 'pm-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: schedutil: Use idle_calls counter of the remote CPU 29 December 2017, 19:54:15 UTC
8880c13 Thomas Gleixner 29 December 2017, 15:29:15 UTC gpio: brcmstb: Make really use of the new lockdep class The recent extension of irq_set_lockdep_class() with a second argument added the new lockdep class to the mrcmstb driver, but used the already existing lockdep class as second argument, which leaves the new lockdep class defined but unused. Use the new lockdep class as that's what the change intended to do. Fixes: 39c3fd58952d ("kernel/irq: Extend lockdep class for request mutex") Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linus.walleij@linaro.org 29 December 2017, 15:37:09 UTC
a31e58e Thomas Gleixner 28 December 2017, 10:33:33 UTC x86/apic: Switch all APICs to Fixed delivery mode Some of the APIC incarnations are operating in lowest priority delivery mode. This worked as long as the vector management code allocated the same vector on all possible CPUs for each interrupt. Lowest priority delivery mode does not necessarily respect the affinity setting and may redirect to some other online CPU. This was documented somewhere in the old code and the conversion to single target delivery missed to update the delivery mode of the affected APIC drivers which results in spurious interrupts on some of the affected CPU/Chipset combinations. Switch the APIC drivers over to Fixed delivery mode and remove all leftovers of lowest priority delivery mode. Switching to Fixed delivery mode is not a problem on these CPUs because the kernel already uses Fixed delivery mode for IPIs. The reason for this is that th SDM explicitely forbids lowest prio mode for IPIs. The reason is obvious: If the irq routing does not honor destination targets in lowest prio mode then an IPI targeted at CPU1 might end up on CPU0, which would be a fatal problem in many cases. As a consequence of this change, the apic::irq_delivery_mode field is now pointless, but this needs to be cleaned up in a separate patch. Fixes: fdba46ffb4c2 ("x86/apic: Get rid of multi CPU affinity") Reported-by: vcaputo@pengaru.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: vcaputo@pengaru.com Cc: Pavel Machek <pavel@ucw.cz> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712281140440.1688@nanos 29 December 2017, 13:20:48 UTC
2758b3e Linus Torvalds 29 December 2017, 07:20:21 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) IPv6 gre tunnels end up with different default features enabled depending upon whether netlink or ioctls are used to bring them up. Fix from Alexey Kodanev. 2) Fix read past end of user control message in RDS< from Avinash Repaka. 3) Missing RCU barrier in mini qdisc code, from Cong Wang. 4) Missing policy put when reusing per-cpu route entries, from Florian Westphal. 5) Handle nested PCI errors properly in bnx2x driver, from Guilherme G. Piccoli. 6) Run nested transport mode IPSEC packets via tasklet, from Herbert Xu. 7) Fix handling poll() for stream sockets in tipc, from Parthasarathy Bhuvaragan. 8) Fix two stack-out-of-bounds issues in IPSEC, from Steffen Klassert. 9) Another zerocopy ubuf handling fix, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) strparser: Call sock_owned_by_user_nocheck sock: Add sock_owned_by_user_nocheck skbuff: in skb_copy_ubufs unclone before releasing zerocopy tipc: fix hanging poll() for stream sockets sctp: Replace use of sockets_allocated with specified macro. bnx2x: Improve reliability in case of nested PCI errors tg3: Enable PHY reset in MTU change path for 5720 tg3: Add workaround to restrict 5762 MRRS to 2048 tg3: Update copyright net: fec: unmap the xmit buffer that are not transferred by DMA tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path tipc: error path leak fixes in tipc_enable_bearer() RDS: Check cmsg_len before dereferencing CMSG_DATA tcp: Avoid preprocessor directives in tracepoint macro args tipc: fix memory leak of group member when peer node is lost net: sched: fix possible null pointer deref in tcf_block_put tipc: base group replicast ack counter on number of actual receivers net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap() net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround ip6_gre: fix device features for ioctl setup ... 29 December 2017, 07:20:21 UTC
fd84b75 Linus Torvalds 29 December 2017, 07:16:24 UTC Merge tag 'drm-fixes-for-v4.15-rc6' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "nouveau and i915 regression fixes" * tag 'drm-fixes-for-v4.15-rc6' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix race when adding delayed work items i915: Reject CCS modifiers for pipe C on Geminilake drm/i915/gvt: Fix pipe A enable as default for vgpu 29 December 2017, 07:16:24 UTC
c0208a3 Linus Torvalds 29 December 2017, 07:14:47 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One more fix for the runtime PM clk patches. We're calling a runtime PM API that may schedule from somewhere that we can't do that. We change to the async version of pm_runtime_put() to fix it" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: use atomic runtime pm api in clk_core_is_enabled 29 December 2017, 07:14:47 UTC
4f2382f Linus Torvalds 29 December 2017, 07:09:45 UTC Merge tag 'led_fixes_for_4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for brightness setting when delay_off is 0" * tag 'led_fixes_for_4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: led: core: Fix brightness setting when setting delay_off=0 29 December 2017, 07:09:45 UTC
19286e4 Linus Torvalds 29 December 2017, 07:06:01 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "This is the next batch of for-rc patches from RDMA. It includes the fix for the ipoib regression I mentioned last time, and the result of a fairly major debugging effort to get iser working reliably on cxgb4 hardware - it turns out the cxgb4 driver was not handling QP error flushing properly causing iser to fail. - cxgb4 fix for an iser testing failure as debugged by Steve and Sagi. The problem was a driver bug in the handling of shutting down a QP. - Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on error unwind and a use after free bug - Improper congestion counter values on mlx5 when link aggregation is enabled - ipoib lockdep regression introduced in this merge window - hfi1 regression supporting the device in a VM introduced in a recent patch - Typo that breaks future uAPI compatibility in the verbs core - More SELinux related oops fixing - Fix an oops during error unwind in mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix mlx5_ib_alloc_mr error flow IB/core: Verify that QP is security enabled in create and destroy IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp() IB/mlx5: Serialize access to the VMA list IB/hfi: Only read capability registers if the capability exists IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush IB/mlx5: Fix congestion counters in LAG mode RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path iw_cxgb4: when flushing, complete all wrs in a chain iw_cxgb4: reflect the original WR opcode in drain cqes iw_cxgb4: Only validate the MSN for successful completions 29 December 2017, 07:06:01 UTC
d5902f6 David S. Miller 28 December 2017, 19:28:23 UTC Merge branch 'strparser-Fix-lockdep-issue' Tom Herbert says: ==================== strparser: Fix lockdep issue When sock_owned_by_user returns true in strparser. Fix is to add and call sock_owned_by_user_nocheck since the check for owned by user is not an error condition in this case. ==================== Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 19:28:23 UTC
d66fa9e Tom Herbert 28 December 2017, 19:00:44 UTC strparser: Call sock_owned_by_user_nocheck strparser wants to check socket ownership without producing any warnings. As indicated by the comment in the code, it is permissible for owned_by_user to return true. Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com> Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 19:28:22 UTC
602f7a2 Tom Herbert 28 December 2017, 19:00:43 UTC sock: Add sock_owned_by_user_nocheck This allows checking socket lock ownership with producing lockdep warnings. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 19:28:22 UTC
f72c4ac Willem de Bruijn 28 December 2017, 17:38:13 UTC skbuff: in skb_copy_ubufs unclone before releasing zerocopy skb_copy_ubufs must unclone before it is safe to modify its skb_shared_info with skb_zcopy_clear. Commit b90ddd568792 ("skbuff: skb_copy_ubufs must release uarg even without user frags") ensures that all skbs release their zerocopy state, even those without frags. But I forgot an edge case where such an skb arrives that is cloned. The stack does not build such packets. Vhost/tun skbs have their frags orphaned before cloning. TCP skbs only attach zerocopy state when a frag is added. But if TCP packets can be trimmed or linearized, this might occur. Tracing the code I found no instance so far (e.g., skb_linearize ends up calling skb_zcopy_clear if !skb->data_len). Still, it is non-obvious that no path exists. And it is fragile to rely on this. Fixes: b90ddd568792 ("skbuff: skb_copy_ubufs must release uarg even without user frags") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 19:26:22 UTC
517d7c7 Parthasarathy Bhuvaragan 28 December 2017, 11:03:06 UTC tipc: fix hanging poll() for stream sockets In commit 42b531de17d2f6 ("tipc: Fix missing connection request handling"), we replaced unconditional wakeup() with condtional wakeup for clients with flags POLLIN | POLLRDNORM | POLLRDBAND. This breaks the applications which do a connect followed by poll with POLLOUT flag. These applications are not woken when the connection is ESTABLISHED and hence sleep forever. In this commit, we fix it by including the POLLOUT event for sockets in TIPC_CONNECTING state. Fixes: 42b531de17d2f6 ("tipc: Fix missing connection request handling") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 17:15:26 UTC
e7e83dd Lukas Bulwahn 26 December 2017, 21:27:20 UTC objtool: Fix Clang enum conversion warning Fix the following Clang enum conversion warning: arch/x86/decode.c:141:20: error: implicit conversion from enumeration type 'enum op_src_type' to different enumeration type 'enum op_dest_type' [-Werror,-Wenum-conversion] op->dest.type = OP_SRC_REG; ~ ^~~~~~~~~~ It just happened to work before because OP_SRC_REG and OP_DEST_REG have the same value. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at> Reviewed-by: Nick Desaulniers <nick.desaulniers@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0") Link: http://lkml.kernel.org/r/b4156c5738bae781c392e7a3691aed4514ebbdf2.1514323568.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 28 December 2017, 12:11:13 UTC
64e05d1 Dou Liyang 04 December 2017, 04:03:13 UTC x86/apic: Update the 'apic=' description of setting APIC driver There are two consumers of apic=: the APIC debug level and the low level generic architecture code, but Linux just documented the first one. Append the second description. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: rdunlap@infradead.org Cc: corbet@lwn.net Link: https://lkml.kernel.org/r/20171204040313.24824-2-douly.fnst@cn.fujitsu.com 28 December 2017, 11:32:07 UTC
4fcab66 Dou Liyang 04 December 2017, 04:03:12 UTC x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case There are two consumers of apic=: apic_set_verbosity() for setting the APIC debug level; parse_apic() for registering APIC driver by hand. X86-32 supports both of them, but sometimes, kernel issues a weird warning. eg: when kernel was booted up with 'apic=bigsmp' in command line, early_param would warn like that: ... [ 0.000000] APIC Verbosity level bigsmp not recognised use apic=verbose or apic=debug [ 0.000000] Malformed early option 'apic' ... Wrap the warning code in CONFIG_X86_64 case to avoid this. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: rdunlap@infradead.org Cc: corbet@lwn.net Link: https://lkml.kernel.org/r/20171204040313.24824-1-douly.fnst@cn.fujitsu.com 28 December 2017, 11:32:06 UTC
11bca0a Guenter Roeck 02 December 2017, 17:13:04 UTC genirq: Guard handle_bad_irq log messages An interrupt storm on a bad interrupt will cause the kernel log to be clogged. [ 60.089234] ->handle_irq(): ffffffffbe2f803f, [ 60.090455] 0xffffffffbf2af380 [ 60.090510] handle_bad_irq+0x0/0x2e5 [ 60.090522] ->irq_data.chip(): ffffffffbf2af380, [ 60.090553] IRQ_NOPROBE set [ 60.090584] ->handle_irq(): ffffffffbe2f803f, [ 60.090590] handle_bad_irq+0x0/0x2e5 [ 60.090596] ->irq_data.chip(): ffffffffbf2af380, [ 60.090602] 0xffffffffbf2af380 [ 60.090608] ->action(): (null) [ 60.090779] handle_bad_irq+0x0/0x2e5 This was seen when running an upstream kernel on Acer Chromebook R11. The system was unstable as result. Guard the log message with __printk_ratelimit to reduce the impact. This won't prevent the interrupt storm from happening, but at least the system remains stable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Link: https://lkml.kernel.org/r/1512234784-21038-1-git-send-email-linux@roeck-us.net 28 December 2017, 11:28:29 UTC
466a2b4 Joel Fernandes 21 December 2017, 01:22:45 UTC cpufreq: schedutil: Use idle_calls counter of the remote CPU Since the recent remote cpufreq callback work, its possible that a cpufreq update is triggered from a remote CPU. For single policies however, the current code uses the local CPU when trying to determine if the remote sg_cpu entered idle or is busy. This is incorrect. To remedy this, compare with the nohz tick idle_calls counter of the remote CPU. Fixes: 674e75411fc2 (sched: cpufreq: Allow remote cpufreq callbacks) Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Joel Fernandes <joelaf@google.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 28 December 2017, 11:26:54 UTC
39c3fd5 Andrew Lunn 02 December 2017, 17:11:04 UTC kernel/irq: Extend lockdep class for request mutex The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch 28 December 2017, 11:26:35 UTC
1528f6e David S. Miller 28 December 2017, 01:35:03 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2017-12-28 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Two small fixes for bpftool. Fix otherwise broken output if any of the system calls failed when listing maps in json format and instead of bailing out, skip maps or progs that disappeared between fetching next id and getting an fd for that id, both from Jakub. 2) Small fix in BPF selftests to respect LLC passed from command line when testing for -mcpu=probe presence, from Quentin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 01:35:03 UTC
59585b4 Jan Engelhardt 25 December 2017, 02:43:53 UTC sparc64: repair calling incorrect hweight function from stubs Commit v4.12-rc4-1-g9289ea7f952b introduced a mistake that made the 64-bit hweight stub call the 16-bit hweight function. Fixes: 9289ea7f952b ("sparc64: Use indirect calls in hamming weight stubs") Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2017, 01:29:48 UTC
45e6ae7 Nitzan Carmi 26 December 2017, 09:20:20 UTC IB/mlx5: Fix mlx5_ib_alloc_mr error flow ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 27 December 2017, 22:24:41 UTC
4a50881 Moni Shoua 24 December 2017, 11:54:58 UTC IB/core: Verify that QP is security enabled in create and destroy The XRC target QP create flow sets up qp_sec only if there is an IB link with LSM security enabled. However, several other related uAPI entry points blindly follow the qp_sec NULL pointer, resulting in a possible oops. Check for NULL before using qp_sec. Cc: <stable@vger.kernel.org> # v4.12 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 27 December 2017, 22:24:41 UTC
05d14e7 Moni Shoua 24 December 2017, 11:54:57 UTC IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp() If the input command length is larger than the kernel supports an error should be returned in case the unsupported bytes are not cleared, instead of the other way aroudn. This matches what all other callers of ib_is_udata_cleared do and will avoid user ABI problems in the future. Cc: <stable@vger.kernel.org> # v4.10 Fixes: 189aba99e700 ("IB/uverbs: Extend modify_qp and support packet pacing") Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 27 December 2017, 22:24:41 UTC
ad9a366 Majd Dibbiny 24 December 2017, 11:54:56 UTC IB/mlx5: Serialize access to the VMA list User-space applications can do mmap and munmap directly at any time. Since the VMA list is not protected with a mutex, concurrent accesses to the VMA list from the mmap and munmap can cause data corruption. Add a mutex around the list. Cc: <stable@vger.kernel.org> # v4.7 Fixes: 7c2344c3bbf9 ("IB/mlx5: Implements disassociate_ucontext API") Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 27 December 2017, 22:24:40 UTC
5f520fc Linus Torvalds 27 December 2017, 21:06:57 UTC Merge tag 'trace-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "While doing tests on tracing over the network, I found that the packets were getting corrupted. In the process I found three bugs. One was the culprit, but the other two scared me. After deeper investigation, they were not as major as I thought they were, due to a signed compared to an unsigned that prevented a negative number from doing actual harm. The two bigger bugs: - Mask the ring buffer data page length. There are data flags at the high bits of the length field. These were not cleared via the length function, and the length could return a negative number. (Although the number returned was unsigned, but was assigned to a signed number) Luckily, this value was compared to PAGE_SIZE which is unsigned and kept it from entering the path that could have caused damage. - Check the page usage before reusing the ring buffer reader page. TCP increments the page ref when passing the page off to the network. The page is passed back to the ring buffer for use on free. But the page could still be in use by the TCP stack. Minor bugs: - Related to the first bug. No need to clear out the unused ring buffer data before sending to user space. It is now done by the ring buffer code itself. - Reset pointers after free on error path. There were some cases in the error path that pointers were freed but not set to NULL, and could have them freed again, having a pointer freed twice" * tag 'trace-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix possible double free on failure of allocating trace buffer tracing: Fix crash when it fails to alloc ring buffer ring-buffer: Do no reuse reader page if still in use tracing: Remove extra zeroing out of the ring buffer page ring-buffer: Mask out the info bits when returning buffer page length 27 December 2017, 21:06:57 UTC
9b95779 Linus Torvalds 27 December 2017, 20:59:27 UTC Merge tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "It seems that Santa overslept with a bunch of gifts; the majority of changes here are various device-specific ASoC fixes, most notably the revert of rcar IOMMU support and fsl_ssi AC97 fixes, but also lots of small fixes for codecs. Besides that, the usual HD-audio quirks and fixes are included, too" * tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits) ALSA: hda - Fix missing COEF init for ALC225/295/299 ALSA: hda: Drop useless WARN_ON() ALSA: hda - change the location for one mic on a Lenovo machine ALSA: hda - fix headset mic detection issue on a Dell machine ALSA: hda - Add MIC_NO_PRESENCE fixup for 2 HP machines ASoC: rsnd: fixup ADG register mask ASoC: rt5514-spi: only enable wakeup when fully initialized ASoC: nau8825: fix issue that pop noise when start capture ASoC: rt5663: Fix the wrong result of the first jack detection ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update ASoC: Intel: Change kern log level to avoid unwanted messages ASoC: atmel-classd: select correct Kconfig symbol ASoC: wm_adsp: Fix validation of firmware and coeff lengths ASoC: Intel: Skylake: Do not check dev_type for dmic link type ASoC: rockchip: disable clock on error ASoC: tlv320aic31xx: Fix GPIO1 register definition ASoC: codecs: msm8916-wcd: Fix supported formats ASoC: fsl_asrc: Fix typo in a field define ASoC: rsnd: ssiu: clear SSI_MODE for non TDM Extended modes ASoC: da7218: Correct IRQ level in DT binding example ... 27 December 2017, 20:59:27 UTC
ac46112 Linus Torvalds 27 December 2017, 19:48:50 UTC x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR) Commit e802a51ede91 ("x86/idt: Consolidate IDT invalidation") cleaned up and unified the IDT invalidation that existed in a couple of places. It changed no actual real code. Despite not changing any actual real code, it _did_ change code generation: by implementing the common idt_invalidate() function in archx86/kernel/idt.c, it made the use of the function in arch/x86/kernel/machine_kexec_32.c be a real function call rather than an (accidental) inlining of the function. That, in turn, exposed two issues: - in load_segments(), we had incorrectly reset all the segment registers, which then made the stack canary load (which gcc does using offset of %gs) cause a trap. Instead of %gs pointing to the stack canary, it will be the normal zero-based kernel segment, and the stack canary load will take a page fault at address 0x14. - to make this even harder to debug, we had invalidated the GDT just before calling idt_invalidate(), which meant that the fault happened with an invalid GDT, which in turn causes a triple fault and immediate reboot. Fix this by (a) not reloading the special segments in load_segments(). We currently don't do any percpu accesses (which would require %fs on x86-32) in this area, but there's no reason to think that we might not want to do them, and like %gs, it's pointless to break it. (b) doing idt_invalidate() before invalidating the GDT, to keep things at least _slightly_ more debuggable for a bit longer. Without a IDT, traps will not work. Without a GDT, traps also will not work, but neither will any segment loads etc. So in a very real sense, the GDT is even more core than the IDT. Fixes: e802a51ede91 ("x86/idt: Consolidate IDT invalidation") Reported-and-tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.LFD.2.21.1712271143180.8572@i7.lan 27 December 2017, 19:59:41 UTC
2b83ff9 Matthieu CASTET 12 December 2017, 10:10:44 UTC led: core: Fix brightness setting when setting delay_off=0 With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set *** stop timer ** led_blink_setup ** led_set_software_blink *** if !delay_on, led off *** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop *** otherwise start timer/set LED_BLINK_SW flag echo xxx > brightness * led_set_brightness ** if LED_BLINK_SW *** if brightness=0, led off *** else apply brightness if next timer <--- timer is stop, and will never apply new setting ** otherwise set led_set_brightness_nosleep To fix that, when we delete the timer, we should clear LED_BLINK_SW. Cc: linux-leds@vger.kernel.org Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> 27 December 2017, 19:45:07 UTC
7ac139e rodrigosiqueira 15 December 2017, 13:15:33 UTC x86: Remove unused parameter of prepare_switch_to Commit e37e43a497d5 ("x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y)") added prepare_switch_to with one extra parameter which is not used by the function, remove it. Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20171215131533.hp6kqebw45o7uvsb@smtp.gmail.com 27 December 2017, 19:37:41 UTC
7ad1437 Thomas Gleixner 27 December 2017, 18:45:31 UTC perf/x86/intel: Plug memory leak in intel_pmu_init() A recent commit introduced an extra merge_attr() call in the skylake branch, which causes a memory leak. Store the pointer to the extra allocated memory and free it at the end of the function. Fixes: a5df70c354c2 ("perf/x86: Only show format attributes when supported") Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@linux.intel.com> 27 December 2017, 19:23:59 UTC
4397f04 Steven Rostedt (VMware) 27 December 2017, 01:07:34 UTC tracing: Fix possible double free on failure of allocating trace buffer Jing Xia and Chunyan Zhang reported that on failing to allocate part of the tracing buffer, memory is freed, but the pointers that point to them are not initialized back to NULL, and later paths may try to free the freed memory again. Jing and Chunyan fixed one of the locations that does this, but missed a spot. Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Cc: stable@vger.kernel.org Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code") Reported-by: Jing Xia <jing.xia@spreadtrum.com> Reported-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 27 December 2017, 19:21:27 UTC
24f2aaf Jing Xia 26 December 2017, 07:12:53 UTC tracing: Fix crash when it fails to alloc ring buffer Double free of the ring buffer happens when it fails to alloc new ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured. The root cause is that the pointer is not set to NULL after the buffer is freed in allocate_trace_buffers(), and the freeing of the ring buffer is invoked again later if the pointer is not equal to Null, as: instance_mkdir() |-allocate_trace_buffers() |-allocate_trace_buffer(tr, &tr->trace_buffer...) |-allocate_trace_buffer(tr, &tr->max_buffer...) // allocate fail(-ENOMEM),first free // and the buffer pointer is not set to null |-ring_buffer_free(tr->trace_buffer.buffer) // out_free_tr |-free_trace_buffers() |-free_trace_buffer(&tr->trace_buffer); //if trace_buffer is not null, free again |-ring_buffer_free(buf->buffer) |-rb_free_cpu_buffer(buffer->buffers[cpu]) // ring_buffer_per_cpu is null, and // crash in ring_buffer_per_cpu->pages Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Cc: stable@vger.kernel.org Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code") Signed-off-by: Jing Xia <jing.xia@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 27 December 2017, 19:21:16 UTC
ae415fa Steven Rostedt (VMware) 23 December 2017, 02:19:29 UTC ring-buffer: Do no reuse reader page if still in use To free the reader page that is allocated with ring_buffer_alloc_read_page(), ring_buffer_free_read_page() must be called. For faster performance, this page can be reused by the ring buffer to avoid having to free and allocate new pages. The issue arises when the page is used with a splice pipe into the networking code. The networking code may up the page counter for the page, and keep it active while sending it is queued to go to the network. The incrementing of the page ref does not prevent it from being reused in the ring buffer, and this can cause the page that is being sent out to the network to be modified before it is sent by reading new data. Add a check to the page ref counter, and only reuse the page if it is not being used anywhere else. Cc: stable@vger.kernel.org Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 27 December 2017, 19:21:09 UTC
6b7e633 Steven Rostedt (VMware) 23 December 2017, 01:38:57 UTC tracing: Remove extra zeroing out of the ring buffer page The ring_buffer_read_page() takes care of zeroing out any extra data in the page that it returns. There's no need to zero it out again from the consumer. It was removed from one consumer of this function, but read_buffers_splice_read() did not remove it, and worse, it contained a nasty bug because of it. Cc: stable@vger.kernel.org Fixes: 2711ca237a084 ("ring-buffer: Move zeroing out excess in page to ring buffer code") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 27 December 2017, 19:20:59 UTC
03bfd4e Dave Airlie 27 December 2017, 19:20:07 UTC Merge tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes GLK pipe C related fix, and a gvt fix. * tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel: i915: Reject CCS modifiers for pipe C on Geminilake drm/i915/gvt: Fix pipe A enable as default for vgpu 27 December 2017, 19:20:07 UTC
45d8b80 Steven Rostedt (VMware) 23 December 2017, 01:32:35 UTC ring-buffer: Mask out the info bits when returning buffer page length Two info bits were added to the "commit" part of the ring buffer data page when returned to be consumed. This was to inform the user space readers that events have been missed, and that the count may be stored at the end of the page. What wasn't handled, was the splice code that actually called a function to return the length of the data in order to zero out the rest of the page before sending it up to user space. These data bits were returned with the length making the value negative, and that negative value was not checked. It was compared to PAGE_SIZE, and only used if the size was less than PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an unsigned compare, meaning the negative size value did not end up causing a large portion of memory to be randomly zeroed out. Cc: stable@vger.kernel.org Fixes: 66a8cb95ed040 ("ring-buffer: Add place holder recording of dropped events") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 27 December 2017, 19:18:10 UTC
8cb38a6 Tonghao Zhang 22 December 2017, 18:15:20 UTC sctp: Replace use of sockets_allocated with specified macro. The patch(180d8cd942ce) replaces all uses of struct sock fields' memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem to accessor macros. But the sockets_allocated field of sctp sock is not replaced at all. Then replace it now for unifying the code. Fixes: 180d8cd942ce ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 18:47:52 UTC
76dc6c0 Mathieu Malaterre 26 December 2017, 14:08:53 UTC cpu/hotplug: Move inline keyword at the beginning of declaration Fix non-fatal warnings such as: kernel/cpu.c:95:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void inline cpuhp_lock_release(bool bringup) { } ^~~~~~ Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20171226140855.16583-1-malat@debian.org 27 December 2017, 18:41:04 UTC
f708405 Guilherme G. Piccoli 22 December 2017, 15:01:39 UTC bnx2x: Improve reliability in case of nested PCI errors While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Shahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 17:13:32 UTC
6753879 David S. Miller 27 December 2017, 16:09:14 UTC Merge branch 'tg3-fixes' Siva Reddy Kallam says: ==================== tg3: update on copyright and couple of fixes First patch: Update copyright Second patch: Add workaround to restrict 5762 MRRS Third patch: Add PHY reset in change MTU path for 5720 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 16:09:14 UTC
e60ee41 Siva Reddy Kallam 22 December 2017, 10:35:29 UTC tg3: Enable PHY reset in MTU change path for 5720 A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 16:09:06 UTC
4419bb1 Siva Reddy Kallam 22 December 2017, 10:35:28 UTC tg3: Add workaround to restrict 5762 MRRS to 2048 One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 16:08:56 UTC
5a8bae9 Siva Reddy Kallam 22 December 2017, 10:35:27 UTC tg3: Update copyright Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 16:08:46 UTC
65bbbf6 David S. Miller 27 December 2017, 15:58:23 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-12-22 1) Check for valid id proto in validate_tmpl(), otherwise we may trigger a warning in xfrm_state_fini(). From Cong Wang. 2) Fix a typo on XFRMA_OUTPUT_MARK policy attribute. From Michal Kubecek. 3) Verify the state is valid when encap_type < 0, otherwise we may crash on IPsec GRO . From Aviv Heller. 4) Fix stack-out-of-bounds read on socket policy lookup. We access the flowi of the wrong address family in the IPv4 mapped IPv6 case, fix this by catching address family missmatches before we do the lookup. 5) fix xfrm_do_migrate() with AEAD to copy the geniv field too. Otherwise the state is not fully initialized and migration fails. From Antony Antony. 6) Fix stack-out-of-bounds with misconfigured transport mode policies. Our policy template validation is not strict enough. It is possible to configure policies with transport mode template where the address family of the template does not match the selectors address family. Fix this by refusing such a configuration, address family can not change on transport mode. 7) Fix a policy reference leak when reusing pcpu xdst entry. From Florian Westphal. 8) Reinject transport-mode packets through tasklet, otherwise it is possible to reate a recursion loop. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 15:58:23 UTC
178e5f5 Fugang Duan 22 December 2017, 09:12:09 UTC net: fec: unmap the xmit buffer that are not transferred by DMA The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 15:55:55 UTC
642a843 Tommi Rantala 22 December 2017, 07:35:17 UTC tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path Calling tipc_mon_delete() before the monitor has been created will oops. This can happen in tipc_enable_bearer() error path if tipc_disc_create() fails. [ 48.589074] BUG: unable to handle kernel paging request at 0000000000001008 [ 48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc] [ 48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0 [ 48.592230] Oops: 0000 [#1] SMP KASAN [ 48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G B 4.15.0-rc4-pc64-dirty #5 [ 48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc] [ 48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282 [ 48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000 [ 48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297 [ 48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533 [ 48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050 [ 48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020 [ 48.608228] FS: 00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000 [ 48.610189] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0 [ 48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.615038] Call Trace: [ 48.615635] tipc_enable_bearer+0x415/0x5e0 [tipc] [ 48.620623] tipc_nl_bearer_enable+0x1ab/0x200 [tipc] [ 48.625118] genl_family_rcv_msg+0x36b/0x570 [ 48.631233] genl_rcv_msg+0x5a/0xa0 [ 48.631867] netlink_rcv_skb+0x1cc/0x220 [ 48.636373] genl_rcv+0x24/0x40 [ 48.637306] netlink_unicast+0x29c/0x350 [ 48.639664] netlink_sendmsg+0x439/0x590 [ 48.642014] SYSC_sendto+0x199/0x250 [ 48.649912] do_syscall_64+0xfd/0x2c0 [ 48.650651] entry_SYSCALL64_slow_path+0x25/0x25 [ 48.651843] RIP: 0033:0x7fc6859848e3 [ 48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3 [ 48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003 [ 48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c [ 48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010 [ 48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000 [ 48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668 [ 48.664073] CR2: 0000000000001008 [ 48.664576] ---[ end trace e811818d54d5ce88 ]--- Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 15:55:00 UTC
1914255 Tommi Rantala 22 December 2017, 07:35:16 UTC tipc: error path leak fixes in tipc_enable_bearer() Fix memory leak in tipc_enable_bearer() if enable_media() fails, and cleanup with bearer_disable() if tipc_mon_create() fails. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 15:54:59 UTC
14e138a Avinash Repaka 22 December 2017, 04:17:04 UTC RDS: Check cmsg_len before dereferencing CMSG_DATA RDS currently doesn't check if the length of the control message is large enough to hold the required data, before dereferencing the control message data. This results in following crash: BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013 [inline] BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157 CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 rds_rdma_bytes net/rds/send.c:1013 [inline] rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108 SYSC_sendmmsg net/socket.c:2139 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2134 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x43fe49 RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49 RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0 R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000 To fix this, we verify that the cmsg_len is large enough to hold the data to be read, before proceeding further. Reported-by: syzbot <syzkaller-bugs@googlegroups.com> Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2017, 15:37:23 UTC
da99706 Daniel Thompson 21 December 2017, 13:06:15 UTC usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Cc: <stable@vger.kernel.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 December 2017, 14:24:27 UTC
dde6340 Alexander Kappner 21 December 2017, 13:06:14 UTC xhci: Fix use-after-free in xhci debugfs Trying to read from debugfs after the system has resumed from hibernate causes a use-after-free and thus a protection fault. Steps to reproduce: Hibernate system, resume from hibernate, then run $ cat /sys/kernel/debug/usb/xhci/*/command-ring/enqueue [ 3902.765086] general protection fault: 0000 [#1] PREEMPT SMP ... [ 3902.765136] RIP: 0010:xhci_trb_virt_to_dma.part.50+0x5/0x30 ... [ 3902.765178] Call Trace: [ 3902.765188] xhci_ring_enqueue_show+0x1e/0x40 [ 3902.765197] seq_read+0xdb/0x3a0 [ 3902.765204] ? __handle_mm_fault+0x5fb/0x1210 [ 3902.765211] full_proxy_read+0x4a/0x70 [ 3902.765219] __vfs_read+0x23/0x120 [ 3902.765228] vfs_read+0x8e/0x130 [ 3902.765235] SyS_read+0x42/0x90 [ 3902.765242] do_syscall_64+0x6b/0x290 [ 3902.765251] entry_SYSCALL64_slow_path+0x25/0x25 The issue is caused by the xhci ring structures being reallocated when the system is resumed, but pointers to the old structures being retained in the debugfs files "private" field: The proposed patch fixes this issue by storing a pointer to the xhci_ring field in the xhci device structure in debugfs rather than directly storing a pointer to the xhci_ring. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Signed-off-by: Alexander Kappner <agk@godking.net> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 December 2017, 14:24:27 UTC
052f71e Mathias Nyman 21 December 2017, 13:06:13 UTC xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate Free the virt_device and its debugfs_private member together. When resuming from hibernate the .free_dev callback unconditionally freed the debugfs_private member, but could leave virt_device intact. This triggered a NULL pointer dereference after resume when usbmuxd sent a USBDEVFS_SETCONFIGURATION ioctl to a device, trying to add a endpoint debugfs entry to a already freed debugfs_private pointer. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Reported-by: Alexander Kappner <agk@godking.net> Tested-by: Alexander Kappner <agk@godking.net> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 December 2017, 14:24:27 UTC
66da168 Greg Kroah-Hartman 27 December 2017, 14:21:31 UTC Merge tag 'usb-serial-4.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes USB-serial fixes for v4.15-rc6 Here are some new device ids for ftdi_sio, option and qcserial. Note that the qcserial patch enables the SetControlLineState request (used to raise DTR/RTS) for the GPS interface of all devices using the Sierra Wireless layout. This was required for the Sierra Wireless EM7565 and has been tested using several other modems as well. All but the final commit have been in linux-next without any reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> 27 December 2017, 14:21:31 UTC
c6a36ad Max Schulze 20 December 2017, 19:47:44 UTC USB: serial: ftdi_sio: add id for Airbus DS P8GR Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze <max.schulze@posteo.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> 27 December 2017, 10:47:31 UTC
44be77c Takashi Iwai 27 December 2017, 07:53:59 UTC ALSA: hda - Fix missing COEF init for ALC225/295/299 There was a long-standing problem on HP Spectre X360 with Kabylake where it lacks of the front speaker output in some situations. Also there are other products showing the similar behavior. The culprit seems to be the missing COEF setup on ALC codecs, ALC225/295/299, which are all compatible. This patch adds the proper COEF setup (to initialize idx 0x67 / bits 0x3000) for addressing the issue. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195457 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 27 December 2017, 07:53:59 UTC
beacbc6 Linus Torvalds 27 December 2017, 02:22:20 UTC Merge tag 'hwmon-for-linus-v4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Handle errors from thermal subsystem" * tag 'hwmon-for-linus-v4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Deal with errors from the thermal subsystem 27 December 2017, 02:22:20 UTC
e2a9300 Linus Torvalds 27 December 2017, 02:17:18 UTC Merge tag 'gpio-v4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Two fixes. They are both kind of important, so why not send a pull request on christmas eve. - Fix a build problem in the gpio single register created by refactorings. - Fix assignment of GPIO line names, something that was mangled by another patch" * tag 'gpio-v4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: fix "gpio-line-names" property retrieval gpio: gpio-reg: fix build 27 December 2017, 02:17:18 UTC
756efe1 Dong Aisheng 22 December 2017, 09:46:04 UTC clk: use atomic runtime pm api in clk_core_is_enabled Current clk_pm_runtime_put is using pm_runtime_put_sync which is not safe to be called in clk_core_is_enabled as it should be able to run in atomic context. Thus use pm_runtime_put instead which is atomic safe. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 27 December 2017, 01:34:03 UTC
e100ff3 Dave Airlie 26 December 2017, 23:58:57 UTC Merge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixes one nouveau regression fix * 'linux-4.15' of git://github.com/skeggsb/linux: drm/nouveau: fix race when adding delayed work items 26 December 2017, 23:58:57 UTC
6a6b0b9 Mat Martineau 21 December 2017, 18:29:09 UTC tcp: Avoid preprocessor directives in tracepoint macro args Using a preprocessor directive to check for CONFIG_IPV6 in the middle of a DECLARE_EVENT_CLASS macro's arg list causes sparse to report a series of errors: ./include/trace/events/tcp.h:68:1: error: directive in argument list ./include/trace/events/tcp.h:75:1: error: directive in argument list ./include/trace/events/tcp.h:144:1: error: directive in argument list ./include/trace/events/tcp.h:151:1: error: directive in argument list ./include/trace/events/tcp.h:216:1: error: directive in argument list ./include/trace/events/tcp.h:223:1: error: directive in argument list ./include/trace/events/tcp.h:274:1: error: directive in argument list ./include/trace/events/tcp.h:281:1: error: directive in argument list Once sparse finds an error, it stops printing warnings for the file it is checking. This masks any sparse warnings that would normally be reported for the core TCP code. Instead, handle the preprocessor conditionals in a couple of auxiliary macros. This also has the benefit of reducing duplicate code. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2017, 22:25:22 UTC
47c332d Linus Walleij 05 December 2017, 08:36:14 UTC hwmon: Deal with errors from the thermal subsystem If the thermal subsystem returne -EPROBE_DEFER or any other error when hwmon calls devm_thermal_zone_of_sensor_register(), this is silently ignored. I ran into this with an incorrectly defined thermal zone, making it non-existing and thus this call failed with -EPROBE_DEFER assuming it would appear later. The sensor was still added which is incorrect: sensors must strictly be added after the thermal zones, so deferred probe must be respected. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 26 December 2017, 19:53:24 UTC
3a33a19 Jon Maloy 21 December 2017, 13:36:34 UTC tipc: fix memory leak of group member when peer node is lost When a group member receives a member WITHDRAW event, this might have two reasons: either the peer member is leaving the group, or the link to the member's node has been lost. In the latter case we need to issue a DOWN event to the user right away, and let function tipc_group_filter_msg() perform delete of the member item. However, in this case we miss to change the state of the member item to MBR_LEAVING, so the member item is not deleted, and we have a memory leak. We now separate better between the four sub-cases of a WITHRAW event and make sure that each case is handled correctly. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2017, 18:06:36 UTC
4853f12 Jiri Pirko 21 December 2017, 12:13:59 UTC net: sched: fix possible null pointer deref in tcf_block_put We need to check block for being null in both tcf_block_put and tcf_block_put_ext. Fixes: 343723dd51ef ("net: sched: fix clsact init error path") Reported-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2017, 18:02:05 UTC
0a3d805 Jon Maloy 21 December 2017, 12:07:11 UTC tipc: base group replicast ack counter on number of actual receivers In commit 2f487712b893 ("tipc: guarantee that group broadcast doesn't bypass group unicast") we introduced a mechanism that requires the first (replicated) broadcast sent after a unicast to be acknowledged by all receivers before permitting sending of the next (true) broadcast. The counter for keeping track of the number of acknowledges to expect is based on the tipc_group::member_cnt variable. But this misses that some of the known members may not be ready for reception, and will never acknowledge the message, either because they haven't fully joined the group or because they are leaving the group. Such members are identified by not fulfilling the condition tested for in the function tipc_group_is_enabled(). We now set the counter for the actual number of acks to receive at the moment the message is sent, by just counting the number of recipients satisfying the tipc_group_is_enabled() test. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2017, 18:00:04 UTC
back to top