https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
c698ca5 Linux 4.16-rc6 19 March 2018, 00:48:42 UTC
9e1909b Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Another set of melted spectrum updates: - Iron out the last late microcode loading issues by actually checking whether new microcode is present and preventing the CPU synchronization to run into a timeout induced hang. - Remove Skylake C2 from the microcode blacklist according to the latest Intel documentation - Fix the VM86 POPF emulation which traps if VIP is set, but VIF is not. Enhance the selftests to catch that kind of issue - Annotate indirect calls/jumps for objtool on 32bit. This is not a functional issue, but for consistency sake its the right thing to do. - Fix a jump label build warning observed on SPARC64 which uses 32bit storage for the code location which is casted to 64 bit pointer w/o extending it to 64bit first. - Add two new cpufeature bits. Not really an urgent issue, but provides them for both x86 and x86/kvm work. No impact on the current kernel" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Fix CPU synchronization routine x86/microcode: Attempt late loading only when new microcode is present x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist jump_label: Fix sparc64 warning x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels x86/vm86/32: Fix POPF emulation selftests/x86/entry_from_vm86: Add test cases for POPF selftests/x86/entry_from_vm86: Exit with 1 if we fail x86/cpufeatures: Add Intel PCONFIG cpufeature x86/cpufeatures: Add Intel Total Memory Encryption cpufeature 18 March 2018, 19:03:15 UTC
df4fe17 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for vmalloc_fault() which uses p*d_huge() unconditionally whether CONFIG_HUGETLBFS is set or not. In case of CONFIG_HUGETLBFS=n this results in a crash as p*d_huge() returns 0 in that case" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix vmalloc_fault to use pXd_large 18 March 2018, 19:01:14 UTC
d2149e1 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three fixes for irq chip drivers: - Make sure the allocations in the GIC-V3 ITS driver are large enough to accomodate the interrupt space - Fix a misplaced __iomem annotation which causes a splat of 26 sparse warnings - Remove an unused function in the IMX GPCV2 driver which causes build warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-imx-gpcv2: Remove unused function irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis irqchip/gic-v3-its: Fix misplaced __iomem annotations 18 March 2018, 18:59:14 UTC
23fe85a Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Thomas Gleixner: "A single fix to prevent partially initialized pointers in mixed mode (64bit kernel on 32bit UEFI)" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/tpm: Initialize pointer variables to zero for mixed mode 18 March 2018, 18:56:53 UTC
3cd1d32 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "PPC: - fix bug leading to lost IPIs and smp_call_function_many() lockups on POWER9 ARM: - locking fix - reset fix - GICv2 multi-source SGI injection fix - GICv2-on-v3 MMIO synchronization fix - make the console less verbose. x86: - fix device passthrough on AMD SME" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix device passthrough when SME is active kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3 KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid KVM: arm/arm64: Reduce verbosity of KVM init log KVM: arm/arm64: Reset mapped IRQs on VM reset KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry 18 March 2018, 18:23:12 UTC
9ef0f88 parisc: Handle case where flush_cache_range is called with no context Just when I had decided that flush_cache_range() was always called with a valid context, Helge reported two cases where the "BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd: kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587! CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1 Workqueue: events free_ioctx   IAOQ[0]: flush_cache_range+0x164/0x168   IAOQ[1]: flush_cache_page+0x0/0x1c8   RP(r2): unmap_page_range+0xae8/0xb88 Backtrace:   [<00000000404a6980>] unmap_page_range+0xae8/0xb88   [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188   [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8   [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208   [<0000000040461518>] truncate_pagecache+0x98/0x108   [<0000000040461624>] truncate_setsize+0x9c/0xb8   [<00000000405d7f30>] put_aio_ring_file+0x80/0x100   [<00000000405d803c>] aio_free_ring+0x8c/0x290   [<00000000405d82c0>] free_ioctx+0x80/0x180   [<0000000040284e6c>] process_one_work+0x21c/0x668   [<00000000402854c4>] worker_thread+0x20c/0x778   [<0000000040291d44>] kthread+0x2d4/0x2e0   [<0000000040204020>] end_fault_vector+0x20/0xc0 This indicates that we need to handle the no context case in flush_cache_range() as we do in flush_cache_mm(). In thinking about this, I realized that we don't need to flush the TLB when there is no context. So, I added context checks to the large flush cases in flush_cache_mm() and flush_cache_range(). The large flush case occurs frequently in flush_cache_mm() and the change should improve fork performance. The v2 version of this change removes the BUG_ON from flush_cache_page() by skipping the TLB flush when there is no context.  I also added code to flush the TLB in flush_cache_mm() and flush_cache_range() when we have a context that's not current.  Now all three routines handle TLB flushes in a similar manner. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de> 17 March 2018, 10:49:39 UTC
8f5fd92 Merge tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "There's an important revert in this pull request that needs to go to stable as it causes a corruption on big endian machines. The other fix is for FIEMAP incorrectly reporting shared extents before a sync and one fix for a crash in raid56. So far we got only one report about the BE corruption, the stable kernels were out for like a week, so hopefully the scope of the damage is low" * tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: use proper endianness accessors for super_copy" btrfs: add missing initialization in btrfs_check_shared btrfs: Fix NULL pointer exception in find_bio_stripe 16 March 2018, 20:37:42 UTC
8757ae2 Merge tag 'microblaze-4.16-rc6' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze fixes from Michal Simek: - Use NO_BOOTMEM to fix boot issue - Fix opt lib endian dependencies * tag 'microblaze-4.16-rc6' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: switch to NO_BOOTMEM microblaze: remove unused alloc_maybe_bootmem microblaze: Setup dependencies for ASM optimized lib functions 16 March 2018, 20:27:34 UTC
bb8c13d x86/microcode: Fix CPU synchronization routine Emanuel reported an issue with a hang during microcode update because my dumb idea to use one atomic synchronization variable for both rendezvous - before and after update - was simply bollocks: microcode: microcode_reload_late: late_cpus: 4 microcode: __reload_late: cpu 2 entered microcode: __reload_late: cpu 1 entered microcode: __reload_late: cpu 3 entered microcode: __reload_late: cpu 0 entered microcode: __reload_late: cpu 1 left microcode: Timeout while waiting for CPUs rendezvous, remaining: 1 CPU1 above would finish, leave and the others will still spin waiting for it to join. So do two synchronization atomics instead, which makes the code a lot more straightforward. Also, since the update is serialized and it also takes quite some time per microcode engine, increase the exit timeout by the number of CPUs on the system. That's ok because the moment all CPUs are done, that timeout will be cut short. Furthermore, panic when some of the CPUs timeout when returning from a microcode update: we can't allow a system with not all cores updated. Also, as an optimization, do not do the exit sync if microcode wasn't updated. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de 16 March 2018, 19:55:51 UTC
2613f36 x86/microcode: Attempt late loading only when new microcode is present Return UCODE_NEW from the scanning functions to denote that new microcode was found and only then attempt the expensive synchronization dance. Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de 16 March 2018, 19:55:51 UTC
1660a76 Merge tag 'drm-fixes-for-v4.16-rc6' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "i915, amd and nouveau fixes. i915: - backlight fix for some panels - pm fix - fencing fix - some GVT fixes amdgpu: - backlight fix across suspend/resume - object destruction ordering issue fix - displayport fix nouveau: - two backlight fixes - fix for some lockups Pretty quiet week, seems like everyone was fixing backlights" * tag 'drm-fixes-for-v4.16-rc6' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/bl: fix backlight regression drm/nouveau/bl: Fix oops on driver unbind drm/nouveau/mmu: ALIGN_DOWN correct variable drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field drm/i915/gvt: Correct the privilege shadow batch buffer address drm/amdgpu/dce: Don't turn off DP sink when disconnected drm/amdgpu: save/restore backlight level in legacy dce code drm/radeon: fix prime teardown order drm/amdgpu: fix prime teardown order drm/i915: Kick the rps worker when changing the boost frequency drm/i915: Only prune fences after wait-for-all drm/i915: Enable VBT based BL control for DP drm/i915/gvt: keep oa config in shadow ctx drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio 16 March 2018, 19:55:00 UTC
093e037 Revert "btrfs: use proper endianness accessors for super_copy" This reverts commit 3c181c12c431fe33b669410d663beb9cceefcd1b. The offending patch was merged in 4.16-rc4 and was promptly applied to stable kernels 4.14.25 and 4.15.8. The patch causes a corruption in several superblock items on big-endian machines because of messed up endianity conversions. The damage is manually repairable. A filesystem cannot be mounted again after it has been unmounted once. We do a full revert and not a fixup so stable can pick that patch ASAP. Fixes: 3c181c12c431 ("btrfs: use proper endianness accessors for super_copy") Link: https://lkml.kernel.org/r/1521139304@msgid.manchmal.in-ulm.de CC: stable@vger.kernel.org # 4.14+ Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: David Sterba <dsterba@suse.com> 16 March 2018, 13:49:44 UTC
daaf216 KVM: x86: Fix device passthrough when SME is active When using device passthrough with SME active, the MMIO range that is mapped for the device should not be mapped encrypted. Add a check in set_spte() to insure that a page is not mapped encrypted if that page is a device MMIO page as indicated by kvm_is_mmio_pfn(). Cc: <stable@vger.kernel.org> # 4.14.x- Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 16 March 2018, 13:32:23 UTC
101646a microblaze: switch to NO_BOOTMEM Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc() doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM. Similar change was already done by others architectures "ARM: mm: Remove bootmem code and switch to NO_BOOTMEM" (sha1: 84f452b1e8fc73ac0e31254c66e3e2260ce5263d) or "openrisc: Consolidate setup to use memblock instead of bootmem" (sha1: 266c7fad157265bb54d17db1c9545f2aaa488643) or "parisc: Drop bootmem and switch to memblock" (sha1: 4fe9e1d957e45ad8eba9885ee860a0e93d13a7c7) or "powerpc: Remove bootmem allocator" (sha1: 10239733ee8617bac3f1c1769af43a88ed979324) or "s390/mm: Convert bootmem to memblock" (sha1: 50be634507284eea38df78154d22615d21200b42) or "sparc64: Convert over to NO_BOOTMEM." (sha1: 625d693e9784f988371e69c2b41a2172c0be6c11) or "xtensa: drop sysmem and switch to memblock" (sha1: 0e46c1115f5816949220d62dd3ff04aa68e7ac6b) Issue was introduced by: "of/fdt: use memblock_virt_alloc for early alloc" (sha1: 0fa1c579349fdd90173381712ad78aa99c09d38b) Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 16 March 2018, 11:51:27 UTC
cd4dfee microblaze: remove unused alloc_maybe_bootmem alloc_maybe_bootmem is unused, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 16 March 2018, 11:51:27 UTC
18ffc0c microblaze: Setup dependencies for ASM optimized lib functions The patch: "microblaze: Setup proper dependency for optimized lib functions" (sha1: 7b6ce52be3f86520524711a6f33f3866f9339694) didn't setup all dependencies properly. Optimized lib functions in C are also present for little endian and optimized library functions in assembler are implemented only for big endian version. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 16 March 2018, 11:51:26 UTC
e3b3121 x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist In accordance with Intel's microcode revision guidance from March 6 MCU rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors that share CPUID 506E3. Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jia Zhang <qianyue.zj@alibaba-inc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kyle Huey <me@kylehuey.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomain 16 March 2018, 11:33:11 UTC
3a1b5de Merge tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only GVT fixes: - Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu) - OA context fix for vGPU profiling (Min) - privilege batch buffer reloc fix (Fred) * tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field drm/i915/gvt: Correct the privilege shadow batch buffer address drm/i915/gvt: keep oa config in shadow ctx drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio 16 March 2018, 02:51:35 UTC
d4487b5 Merge branch 'linux-4.16' of git://github.com/skeggsb/linux into drm-fixes nouveau regression fixes. * 'linux-4.16' of git://github.com/skeggsb/linux: drm/nouveau/bl: fix backlight regression drm/nouveau/bl: Fix oops on driver unbind drm/nouveau/mmu: ALIGN_DOWN correct variable 16 March 2018, 02:06:17 UTC
df09348 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: - backport-friendly part of lock_parent() race fix - a fix for an assumption in the heurisic used by path_connected() that is not true on NFS - livelock fixes for d_alloc_parallel() * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Teach path_connected to handle nfs filesystems with multiple roots. fs: dcache: Use READ_ONCE when accessing i_dir_seq fs: dcache: Avoid livelock between d_alloc_parallel and __d_add lock_parent() needs to recheck if dentry got __dentry_kill'ed under it 16 March 2018, 01:57:14 UTC
9e75dc6 drm/nouveau/bl: fix backlight regression Fixes: 3c66c87dc9 ("drm/nouveau/disp: remove hw-specific customisation of output paths") Suggested-by: Ben Skeggs <skeggsb@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 16 March 2018, 01:55:05 UTC
76f2e2b drm/nouveau/bl: Fix oops on driver unbind Unbinding nouveau on a dual GPU MacBook Pro oopses because we iterate over the bl_connectors list in nouveau_backlight_exit() but skipped initializing it in nouveau_backlight_init(). Stacktrace for posterity: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: nouveau_backlight_exit+0x2b/0x70 [nouveau] nouveau_display_destroy+0x29/0x80 [nouveau] nouveau_drm_unload+0x65/0xe0 [nouveau] drm_dev_unregister+0x3c/0xe0 [drm] drm_put_dev+0x2e/0x60 [drm] nouveau_drm_device_remove+0x47/0x70 [nouveau] pci_device_remove+0x36/0xb0 device_release_driver_internal+0x157/0x220 driver_detach+0x39/0x70 bus_remove_driver+0x51/0xd0 pci_unregister_driver+0x2a/0xa0 nouveau_drm_exit+0x15/0xfb0 [nouveau] SyS_delete_module+0x18c/0x290 system_call_fast_compare_end+0xc/0x6f Fixes: b53ac1ee12a3 ("drm/nouveau/bl: Do not register interface if Apple GMUX detected") Cc: stable@vger.kernel.org # v4.10+ Cc: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 16 March 2018, 01:55:05 UTC
da5e45e drm/nouveau/mmu: ALIGN_DOWN correct variable Commit 7110c89bb8852ff8b0f88ce05b332b3fe22bd11e ("mmu: swap out round for ALIGN") replaced two calls to round/rounddown with ALIGN/ALIGN_DOWN, but erroneously applied ALIGN_DOWN to a different variable (addr) and left intended variable (tail) not rounded/ALIGNed. As a result screen corruption, X lockups are observable. An example of kernel log of affected system with NV98 card where it was bisected: nouveau 0000:01:00.0: gr: TRAP_M2MF 00000002 [IN] nouveau 0000:01:00.0: gr: TRAP_M2MF 00320951 400007c0 00000000 04000000 nouveau 0000:01:00.0: gr: 00200000 [] ch 1 [000fbbe000 DRM] subc 4 class 5039 mthd 0100 data 00000000 nouveau 0000:01:00.0: fb: trapped read at 0040000000 on channel 1 [0fbbe000 DRM] engine 00 [PGRAPH] client 03 [DISPATCH] subclient 04 [M2M_IN] reason 00000006 [NULL_DMAOBJ] Fixes bug 105173 ("[MCP79][Regression] Unhandled NULL pointer dereference in nvkm_object_unmap since kernel 4.15") https://bugs.freedesktop.org/show_bug.cgi?id=105173 Fixes: 7110c89bb885 ("mmu: swap out round for ALIGN ") Tested-by: Pierre Moreau <pierre.morrow@free.fr> Reviewed-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Maris Nartiss <maris.nartiss@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # v4.15+ 16 March 2018, 01:55:04 UTC
95dd775 fs: Teach path_connected to handle nfs filesystems with multiple roots. On nfsv2 and nfsv3 the nfs server can export subsets of the same filesystem and report the same filesystem identifier, so that the nfs client can know they are the same filesystem. The subsets can be from disjoint directory trees. The nfsv2 and nfsv3 filesystems provides no way to find the common root of all directory trees exported form the server with the same filesystem identifier. The practical result is that in struct super s_root for nfs s_root is not necessarily the root of the filesystem. The nfs mount code sets s_root to the root of the first subset of the nfs filesystem that the kernel mounts. This effects the dcache invalidation code in generic_shutdown_super currently called shrunk_dcache_for_umount and that code for years has gone through an additional list of dentries that might be dentry trees that need to be freed to accomodate nfs. When I wrote path_connected I did not realize nfs was so special, and it's hueristic for avoiding calling is_subdir can fail. The practical case where this fails is when there is a move of a directory from the subtree exposed by one nfs mount to the subtree exposed by another nfs mount. This move can happen either locally or remotely. With the remote case requiring that the move directory be cached before the move and that after the move someone walks the path to where the move directory now exists and in so doing causes the already cached directory to be moved in the dcache through the magic of d_splice_alias. If someone whose working directory is in the move directory or a subdirectory and now starts calling .. from the initial mount of nfs (where s_root == mnt_root), then path_connected as a heuristic will not bother with the is_subdir check. As s_root really is not the root of the nfs filesystem this heuristic is wrong, and the path may actually not be connected and path_connected can fail. The is_subdir function might be cheap enough that we can call it unconditionally. Verifying that will take some benchmarking and the result may not be the same on all kernels this fix needs to be backported to. So I am avoiding that for now. Filesystems with snapshots such as nilfs and btrfs do something similar. But as the directory tree of the snapshots are disjoint from one another and from the main directory tree rename won't move things between them and this problem will not occur. Cc: stable@vger.kernel.org Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Fixes: 397d425dc26d ("vfs: Test for and handle paths that are unreachable from their mnt_root") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 15 March 2018, 22:48:38 UTC
05b429a Merge tag 'gvt-fixes-2018-03-15' of https://github.com/intel/gvt-linux into drm-intel-fixes gvt-fixes-2018-03-15 - Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu) - OA context fix for vGPU profiling (Min) - privilege batch buffer reloc fix (Fred) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180315100023.5n5a74afky6qinoh@zhen-hp.sh.intel.com 15 March 2018, 22:37:57 UTC
cfb61b5 sparc64: Fix regression in pmdp_invalidate(). pmdp_invalidate() was changed to update the pmd atomically (to not lose dirty/access bits) and return the original pmd value. However, in doing so, we lost a lot of the essential work that set_pmd_at() does, namely to update hugepage mapping counts and queuing up the batched TLB flush entry. Thus we were not flushing entries out of the TLB when making such PMD changes. Fix this by abstracting the accounting work of set_pmd_at() out into a separate function, and call it from pmdp_establish(). Fixes: a8e654f01cb7 ("sparc64: update pmdp_invalidate() to return old pmd value") Signed-off-by: David S. Miller <davem@davemloft.net> 15 March 2018, 21:18:00 UTC
52be7a4 Merge tag 'kvm-ppc-fixes-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master Fix for PPC KVM for 4.16 - Fix bug leading to lost IPIs on POWER9 and hence to other CPUs reporting lockups in smp_call_function_many(). 15 March 2018, 20:57:26 UTC
bb9b4db Merge tag 'kvm-arm-fixes-for-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master kvm/arm fixes for 4.16, take 2 - Peace of mind locking fix in vgic_mmio_read_pending - Allow hw-mapped interrupts to be reset when the VM resets - Fix GICv2 multi-source SGI injection - Fix MMIO synchronization for GICv2 on v3 emulation - Remove excess verbosity on the console 15 March 2018, 20:45:37 UTC
e2c15af Merge tag 'sound-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A series of small fixes in ASoC, HD-audio and core stuff: - a UAF fix in ALSA PCM core - yet more hardening for ALSA sequencer - a regression fix for the previous HD-audio power_save option change - various ASoC codec fixes (sgtl5000, rt5651, hdmi-codec, wm_adsp) - minor ASoC platform fixes (AMD ACP, sun4i)" * tag 'sound-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert power_save option default value ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats() ALSA: seq: Clear client entry before deleting else at closing ALSA: seq: Fix possible UAF in snd_seq_check_queue() ASoC: amd: 16bit resolution support for i2s sp instance ASoC: wm_adsp: For TLV controls only register TLV get/set ASoC: sun4i-i2s: Fix RX slot number of SUN8I ASoC: hdmi-codec: Fix module unloading caused kernel crash ASoC: rt5651: Fix regcache sync errors on resume ASoC: sgtl5000: Fix suspend/resume MAINTAINERS: Add myself as sgtl5000 maintainer ASoC: samsung: Add the DT binding files entry to MAINTAINERS sgtl5000: change digital_mute policy 15 March 2018, 18:07:35 UTC
667058a Merge tag 'for-4.16/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable DM multipath fix to restore ability to pass integrity data - two DM multipath fixes for a fix that was merged into 4.16-rc5 * tag 'for-4.16/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm mpath: fix passing integrity data dm mpath: eliminate need to use scsi_device_from_queue dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointer 15 March 2018, 18:04:46 UTC
850555d drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field This is to fix warning got as: [ 6730.476938] ------------[ cut here ]------------ [ 6730.476979] Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLAB object 'gvt-g_vgpu_workload' (offset 120, size 4)! [ 6730.477021] WARNING: CPU: 2 PID: 441 at mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 [ 6730.477042] Modules linked in: tun(E) bridge(E) stp(E) llc(E) kvmgt(E) x86_pkg_temp_thermal(E) vfio_mdev(E) intel_powerclamp(E) mdev(E) coretemp(E) vfio_iommu_type1(E) vfio(E) kvm_intel(E) kvm(E) hid_generic(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) usbhid(E) i915(E) crc32c_intel(E) hid(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) intel_cstate(E) idma64(E) evdev(E) virt_dma(E) iTCO_wdt(E) intel_uncore(E) intel_rapl_perf(E) intel_lpss_pci(E) sg(E) shpchp(E) mei_me(E) pcspkr(E) iTCO_vendor_support(E) intel_lpss(E) intel_pch_thermal(E) prime_numbers(E) mei(E) mfd_core(E) video(E) acpi_pad(E) button(E) binfmt_misc(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) e1000e(E) xhci_pci(E) sdhci_pci(E) [ 6730.477244] ptp(E) cqhci(E) xhci_hcd(E) pps_core(E) sdhci(E) mmc_core(E) i2c_i801(E) usbcore(E) thermal(E) fan(E) [ 6730.477276] CPU: 2 PID: 441 Comm: gvt workload 0 Tainted: G E 4.16.0-rc1-gvt-staging-0213+ #127 [ 6730.477303] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0039.2016.0316.1747 03/16/2016 [ 6730.477326] RIP: 0010:usercopy_warn+0x7e/0xa0 [ 6730.477340] RSP: 0018:ffffba6301223d18 EFLAGS: 00010286 [ 6730.477355] RAX: 0000000000000000 RBX: ffff8f41caae9838 RCX: 0000000000000006 [ 6730.477375] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff8f41dad166f0 [ 6730.477395] RBP: 0000000000000004 R08: 0000000000000576 R09: 0000000000000000 [ 6730.477415] R10: ffffffffb1293fb2 R11: 00000000ffffffff R12: 0000000000000001 [ 6730.477447] R13: ffff8f41caae983c R14: ffff8f41caae9838 R15: 00007f183ca2b000 [ 6730.477467] FS: 0000000000000000(0000) GS:ffff8f41dad00000(0000) knlGS:0000000000000000 [ 6730.477489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6730.477506] CR2: 0000559462817291 CR3: 000000028b46c006 CR4: 00000000003626e0 [ 6730.477526] Call Trace: [ 6730.477537] __check_object_size+0x9c/0x1a0 [ 6730.477562] __kvm_write_guest_page+0x45/0x90 [kvm] [ 6730.477585] kvm_write_guest+0x46/0x80 [kvm] [ 6730.477599] kvmgt_rw_gpa+0x9b/0xf0 [kvmgt] [ 6730.477642] workload_thread+0xa38/0x1040 [i915] [ 6730.477659] ? do_wait_intr_irq+0xc0/0xc0 [ 6730.477673] ? finish_wait+0x80/0x80 [ 6730.477707] ? clean_workloads+0x120/0x120 [i915] [ 6730.477722] kthread+0x111/0x130 [ 6730.477733] ? _kthread_create_worker_on_cpu+0x60/0x60 [ 6730.477750] ? exit_to_usermode_loop+0x6f/0xb0 [ 6730.477766] ret_from_fork+0x35/0x40 [ 6730.477777] Code: 48 c7 c0 20 e3 25 b1 48 0f 44 c2 41 50 51 41 51 48 89 f9 49 89 f1 4d 89 d8 4c 89 d2 48 89 c6 48 c7 c7 78 e3 25 b1 e8 b2 bc e4 ff <0f> ff 48 83 c4 18 c3 48 c7 c6 09 d0 26 b1 49 89 f1 49 89 f3 eb [ 6730.477849] ---[ end trace cae869c1c323e45a ]--- By whitelist guest page write from workload struct allocated from kmem cache. Reviewed-by: Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit 5627705406874df57fdfad3b4e0c9aedd3b007df) 15 March 2018, 07:07:22 UTC
ef75c68 drm/i915/gvt: Correct the privilege shadow batch buffer address Once the ring buffer is copied to ring_scan_buffer and scanned, the shadow batch buffer start address is only updated into ring_scan_buffer, not the real ring address allocated through intel_ring_begin in later copy_workload_to_ring_buffer. This patch is only to set the right shadow batch buffer address from Ring buffer, not include the shadow_wa_ctx. v2: - refine some comments. (Zhenyu) v3: - fix typo in title. (Zhenyu) v4: - remove the unnecessary comments. (Zhenyu) - add comments in bb_start_cmd_va update. (Zhenyu) Fixes: 0a53bc07f044 ("drm/i915/gvt: Separate cmd scan from request allocation") Cc: stable@vger.kernel.org # v4.15 Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yulei Zhang <yulei.zhang@intel.com> Signed-off-by: fred gao <fred.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> 15 March 2018, 07:06:26 UTC
0aa3fdb Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is four patches, consisting of one regression from the merge window (qla2xxx), one long-standing memory leak (sd_zbc), one event queue mislabelling which we want to eliminate to discourage the pattern (mpt3sas), and one behaviour change because re-reading the partition table shouldn't clear the ro flag" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Keep disk read-only when re-reading partition scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure scsi: sd_zbc: Fix potential memory leak scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM 15 March 2018, 00:02:49 UTC
8df3aaa btree: avoid variable-length allocations geo->keylen cannot be larger than 4. So we might as well make fixed-size allocations. Given the one remaining user, geo->keylen cannot even be larger than 1. Logfs used to have 64bit and 128bit keys, tcm_qla2xxx only has 32bit keys. But let's not break the code if we don't have to. Signed-off-by: Joern Engel <joern@purestorage.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2018, 23:55:29 UTC
fed8f50 Merge branch 'percpu_ref-rcu-audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc Pull percpu_ref rcu fixes from Tejun Heo: "Jann Horn found that aio was depending on the internal RCU grace periods of percpu-ref and that it's broken because aio uses regular RCU while percpu_ref uses sched-RCU. Depending on percpu_ref's internal grace periods isn't a good idea because - The RCU type might not match. - percpu_ref's grace periods are used to switch to atomic mode. They aren't between the last put and the invocation of the last release. This is easy to get confused about and can lead to subtle bugs. - percpu_ref might not have grace periods at all depending on its current operation mode. This patchset audits and fixes percpu_ref users for their RCU usages" [ There's a continuation of this series that clarifies percpu_ref documentation that the internal grace periods must not be depended upon, and introduces rcu_work to simplify bouncing to a workqueue after an RCU grace period. That will go in for 4.17 - this is just the minimal set with the fixes that are tagged for -stable ] * 'percpu_ref-rcu-audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: RDMAVT: Fix synchronization around percpu_ref fs/aio: Use RCU accessors for kioctx_table->table[] fs/aio: Add explicit RCU grace period when freeing kioctx 14 March 2018, 23:51:33 UTC
3e04040 Revert "mm/page_alloc: fix memmap_init_zone pageblock alignment" This reverts commit 864b75f9d6b0100bb24fdd9a20d156e7cda9b5ae. Commit 864b75f9d6b0 ("mm/page_alloc: fix memmap_init_zone pageblock alignment") modified the logic in memmap_init_zone() to initialize struct pages associated with invalid PFNs, to appease a VM_BUG_ON() in move_freepages(), which is redundant by its own admission, and dereferences struct page fields to obtain the zone without checking whether the struct pages in question are valid to begin with. Commit 864b75f9d6b0 only makes it worse, since the rounding it does may cause pfn assume the same value it had in a prior iteration of the loop, resulting in an infinite loop and a hang very early in the boot. Also, since it doesn't perform the same rounding on start_pfn itself but only on intermediate values following an invalid PFN, we may still hit the same VM_BUG_ON() as before. So instead, let's fix this at the core, and ensure that the BUG check doesn't dereference struct page fields of invalid pages. Fixes: 864b75f9d6b0 ("mm/page_alloc: fix memmap_init_zone pageblock alignment") Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Cc: Daniel Vacek <neelx@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2018, 23:33:28 UTC
67f1976 Merge tag 'drm-intel-fixes-2018-03-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - 1 display fix for bxt - 1 gem fix for fences - 1 gem/pm fix for rps freq * tag 'drm-intel-fixes-2018-03-14' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Kick the rps worker when changing the boost frequency drm/i915: Only prune fences after wait-for-all drm/i915: Enable VBT based BL control for DP 14 March 2018, 23:26:11 UTC
4cdc8f1 Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes A few fixes for 4.16: - Fix a backlight S/R regression on amdgpu - Fix prime teardown on radeon and amdgpu - DP fix for amdgpu * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu/dce: Don't turn off DP sink when disconnected drm/amdgpu: save/restore backlight level in legacy dce code drm/radeon: fix prime teardown order drm/amdgpu: fix prime teardown order 14 March 2018, 23:23:54 UTC
18bf591 btrfs: add missing initialization in btrfs_check_shared This patch addresses an issue that causes fiemap to falsely report a shared extent. The test case is as follows: xfs_io -f -d -c "pwrite -b 16k 0 64k" -c "fiemap -v" /media/scratch/file5 sync xfs_io -c "fiemap -v" /media/scratch/file5 which gives the resulting output: wrote 65536/65536 bytes at offset 0 64 KiB, 4 ops; 0.0000 sec (121.359 MiB/sec and 7766.9903 ops/sec) /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x2001 /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x1 This is because btrfs_check_shared calls find_parent_nodes repeatedly in a loop, passing a share_check struct to report the count of shared extent. But btrfs_check_shared does not re-initialize the count value to zero for subsequent calls from the loop, resulting in a false share count value. This is a regressive behavior from 4.13. With proper re-initialization the test result is as follows: wrote 65536/65536 bytes at offset 0 64 KiB, 4 ops; 0.0000 sec (110.035 MiB/sec and 7042.2535 ops/sec) /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x1 /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x1 which corrects the regression. Fixes: 3ec4d3238ab ("btrfs: allow backref search checks for shared extents") Signed-off-by: Edmund Nadolski <enadolski@suse.com> [ add text from cover letter to changelog ] Signed-off-by: David Sterba <dsterba@suse.com> 14 March 2018, 21:26:46 UTC
047fdea btrfs: Fix NULL pointer exception in find_bio_stripe On detaching of a disk which is a part of a RAID6 filesystem, the following kernel OOPS may happen: [63122.680461] BTRFS error (device sdo): bdev /dev/sdo errs: wr 0, rd 0, flush 1, corrupt 0, gen 0 [63122.719584] BTRFS warning (device sdo): lost page write due to IO error on /dev/sdo [63122.719587] BTRFS error (device sdo): bdev /dev/sdo errs: wr 1, rd 0, flush 1, corrupt 0, gen 0 [63122.803516] BTRFS warning (device sdo): lost page write due to IO error on /dev/sdo [63122.803519] BTRFS error (device sdo): bdev /dev/sdo errs: wr 2, rd 0, flush 1, corrupt 0, gen 0 [63122.863902] BTRFS critical (device sdo): fatal error on device /dev/sdo [63122.935338] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [63122.946554] IP: fail_bio_stripe+0x58/0xa0 [btrfs] [63122.958185] PGD 9ecda067 P4D 9ecda067 PUD b2b37067 PMD 0 [63122.971202] Oops: 0000 [#1] SMP [63123.006760] CPU: 0 PID: 3979 Comm: kworker/u8:9 Tainted: G W 4.14.2-16-scst34x+ #8 [63123.007091] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [63123.007402] Workqueue: btrfs-worker btrfs_worker_helper [btrfs] [63123.007595] task: ffff880036ea4040 task.stack: ffffc90006384000 [63123.007796] RIP: 0010:fail_bio_stripe+0x58/0xa0 [btrfs] [63123.007968] RSP: 0018:ffffc90006387ad8 EFLAGS: 00010287 [63123.008140] RAX: 0000000000000002 RBX: ffff88004beaa0b8 RCX: ffff8800b2bd5690 [63123.008359] RDX: 0000000000000000 RSI: ffff88007bb43500 RDI: ffff88004beaa000 [63123.008621] RBP: ffffc90006387ae8 R08: 0000000099100000 R09: ffff8800b2bd5600 [63123.008840] R10: 0000000000000004 R11: 0000000000010000 R12: ffff88007bb43500 [63123.009059] R13: 00000000fffffffb R14: ffff880036fc5180 R15: 0000000000000004 [63123.009278] FS: 0000000000000000(0000) GS:ffff8800b7000000(0000) knlGS:0000000000000000 [63123.009564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63123.009748] CR2: 0000000000000080 CR3: 00000000b0866000 CR4: 00000000000406f0 [63123.009969] Call Trace: [63123.010085] raid_write_end_io+0x7e/0x80 [btrfs] [63123.010251] bio_endio+0xa1/0x120 [63123.010378] generic_make_request+0x218/0x270 [63123.010921] submit_bio+0x66/0x130 [63123.011073] finish_rmw+0x3fc/0x5b0 [btrfs] [63123.011245] full_stripe_write+0x96/0xc0 [btrfs] [63123.011428] raid56_parity_write+0x117/0x170 [btrfs] [63123.011604] btrfs_map_bio+0x2ec/0x320 [btrfs] [63123.011759] ? ___cache_free+0x1c5/0x300 [63123.011909] __btrfs_submit_bio_done+0x26/0x50 [btrfs] [63123.012087] run_one_async_done+0x9c/0xc0 [btrfs] [63123.012257] normal_work_helper+0x19e/0x300 [btrfs] [63123.012429] btrfs_worker_helper+0x12/0x20 [btrfs] [63123.012656] process_one_work+0x14d/0x350 [63123.012888] worker_thread+0x4d/0x3a0 [63123.013026] ? _raw_spin_unlock_irqrestore+0x15/0x20 [63123.013192] kthread+0x109/0x140 [63123.013315] ? process_scheduled_works+0x40/0x40 [63123.013472] ? kthread_stop+0x110/0x110 [63123.013610] ret_from_fork+0x25/0x30 [63123.014469] RIP: fail_bio_stripe+0x58/0xa0 [btrfs] RSP: ffffc90006387ad8 [63123.014678] CR2: 0000000000000080 [63123.016590] ---[ end trace a295ea7259c17880 ]— This is reproducible in a cycle, where a series of writes is followed by SCSI device delete command. The test may take up to few minutes. Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") [ no signed-off-by provided ] Author: Dmitriy Gorokh <Dmitriy.Gorokh@wdc.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 14 March 2018, 21:26:35 UTC
7d61726 drm/amdgpu/dce: Don't turn off DP sink when disconnected Turning off the sink in this case causes various issues, because userspace expects it to stay on until it turns it off explicitly. Instead, turn the sink off and back on when a display is connected again. This dance seems necessary for link training to work correctly. Bugzilla: https://bugs.freedesktop.org/105308 Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 14 March 2018, 20:40:00 UTC
b5e3241 drm/amdgpu: save/restore backlight level in legacy dce code Save/restore the backlight level scratch register in S3/S4 so the backlight level comes back at the previously requested level. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047 Fixes: 4ec6ecf48c64d (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling) Acked-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 14 March 2018, 20:39:51 UTC
0f4f715 drm/radeon: fix prime teardown order We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 14 March 2018, 20:39:42 UTC
342038d drm/amdgpu: fix prime teardown order We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 14 March 2018, 20:39:35 UTC
274a1ff Merge tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform drives fixes from Darren Hart: - DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it depends on DCDBAS, update the Kconfig accordingly. - fix the dell driver init order to ensure that the driver dependencies are met, avoiding race conditions resulting in boot failure on certain systems when the drivers are built-in. * tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Fix dell driver init order platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI 14 March 2018, 20:01:14 UTC
8c5c147 dm mpath: fix passing integrity data After v4.12 commit e2460f2a4bc7 ("dm: mark targets that pass integrity data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support block integrity any more. So add it to the whitelist. This is also a pre-requisite to use block integrity with other dm layer(s) on top of multipath, such as kpartx partitions (dm-linear) or LVM. Also, bump target version to reflect this fix. Fixes: e2460f2a4bc7 ("dm: mark targets that pass integrity data") Cc: <stable@vger.kernel.org> #4.12+ Bisected-by: Fedor Loshakov <loshakov@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> 14 March 2018, 19:39:33 UTC
18a9552 x86/mm: Fix vmalloc_fault to use pXd_large Gratian Crisan reported that vmalloc_fault() crashes when CONFIG_HUGETLBFS is not set since the function inadvertently uses pXn_huge(), which always return 0 in this case. ioremap() does not depend on CONFIG_HUGETLBFS. Fix vmalloc_fault() to call pXd_large() instead. Fixes: f4eafd8bcd52 ("x86/mm: Fix vmalloc_fault() to handle large pages properly") Reported-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20180313170347.3829-2-toshi.kani@hpe.com 14 March 2018, 19:22:42 UTC
74b44bb RDMAVT: Fix synchronization around percpu_ref rvt_mregion uses percpu_ref for reference counting and RCU to protect accesses from lkey_table. When a rvt_mregion needs to be freed, it first gets unregistered from lkey_table and then rvt_check_refs() is called to wait for in-flight usages before the rvt_mregion is freed. rvt_check_refs() seems to have a couple issues. * It has a fast exit path which tests percpu_ref_is_zero(). However, a percpu_ref reading zero doesn't mean that the object can be released. In fact, the ->release() callback might not even have started executing yet. Proceeding with freeing can lead to use-after-free. * lkey_table is RCU protected but there is no RCU grace period in the free path. percpu_ref uses RCU internally but it's sched-RCU whose grace periods are different from regular RCU. Also, it generally isn't a good idea to depend on internal behaviors like this. To address the above issues, this patch removes the fast exit and adds an explicit synchronize_rcu(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: linux-rdma@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2018, 19:10:18 UTC
d0264c0 fs/aio: Use RCU accessors for kioctx_table->table[] While converting ioctx index from a list to a table, db446a08c23d ("aio: convert the ioctx list to table lookup v3") missed tagging kioctx_table->table[] as an array of RCU pointers and using the appropriate RCU accessors. This introduces a small window in the lookup path where init and access may race. Mark kioctx_table->table[] with __rcu and use the approriate RCU accessors when using the field. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jann Horn <jannh@google.com> Fixes: db446a08c23d ("aio: convert the ioctx list to table lookup v3") Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org # v3.12+ 14 March 2018, 19:10:17 UTC
a6d7cff fs/aio: Add explicit RCU grace period when freeing kioctx While fixing refcounting, e34ecee2ae79 ("aio: Fix a trinity splat") incorrectly removed explicit RCU grace period before freeing kioctx. The intention seems to be depending on the internal RCU grace periods of percpu_ref; however, percpu_ref uses a different flavor of RCU, sched-RCU. This can lead to kioctx being freed while RCU read protected dereferences are still in progress. Fix it by updating free_ioctx() to go through call_rcu() explicitly. v2: Comment added to explain double bouncing. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jann Horn <jannh@google.com> Fixes: e34ecee2ae79 ("aio: Fix a trinity splat") Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org # v3.13+ 14 March 2018, 19:10:17 UTC
27e91ad kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3 On guest exit, and when using GICv2 on GICv3, we use a dsb(st) to force synchronization between the memory-mapped guest view and the system-register view that the hypervisor uses. This is incorrect, as the spec calls out the need for "a DSB whose required access type is both loads and stores with any Shareability attribute", while we're only synchronizing stores. We also lack an isb after the dsb to ensure that the latter has actually been executed before we start reading stuff from the sysregs. The fix is pretty easy: turn dsb(st) into dsb(sy), and slap an isb() just after. Cc: stable@vger.kernel.org Fixes: f68d2b1b73cc ("arm64: KVM: Implement vgic-v3 save/restore") Acked-by: Christoffer Dall <cdall@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 14 March 2018, 18:31:26 UTC
16ca6a6 KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid The vgic code is trying to be clever when injecting GICv2 SGIs, and will happily populate LRs with the same interrupt number if they come from multiple vcpus (after all, they are distinct interrupt sources). Unfortunately, this is against the letter of the architecture, and the GICv2 architecture spec says "Each valid interrupt stored in the List registers must have a unique VirtualID for that virtual CPU interface.". GICv3 has similar (although slightly ambiguous) restrictions. This results in guests locking up when using GICv2-on-GICv3, for example. The obvious fix is to stop trying so hard, and inject a single vcpu per SGI per guest entry. After all, pending SGIs with multiple source vcpus are pretty rare, and are mostly seen in scenario where the physical CPUs are severely overcomitted. But as we now only inject a single instance of a multi-source SGI per vcpu entry, we may delay those interrupts for longer than strictly necessary, and run the risk of injecting lower priority interrupts in the meantime. In order to address this, we adopt a three stage strategy: - If we encounter a multi-source SGI in the AP list while computing its depth, we force the list to be sorted - When populating the LRs, we prevent the injection of any interrupt of lower priority than that of the first multi-source SGI we've injected. - Finally, the injection of a multi-source SGI triggers the request of a maintenance interrupt when there will be no pending interrupt in the LRs (HCR_NPIE). At the point where the last pending interrupt in the LRs switches from Pending to Active, the maintenance interrupt will be delivered, allowing us to add the remaining SGIs using the same process. Cc: stable@vger.kernel.org Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework") Acked-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 14 March 2018, 18:31:04 UTC
7660042 KVM: arm/arm64: Reduce verbosity of KVM init log On my GICv3 system, the following is printed to the kernel log at boot: kvm [1]: 8-bit VMID kvm [1]: IDMAP page: d20e35000 kvm [1]: HYP VA range: 800000000000:ffffffffffff kvm [1]: vgic-v2@2c020000 kvm [1]: GIC system register CPU interface enabled kvm [1]: vgic interrupt IRQ1 kvm [1]: virtual timer IRQ4 kvm [1]: Hyp mode initialized successfully The KVM IDMAP is a mapping of a statically allocated kernel structure, and so printing its physical address leaks the physical placement of the kernel when physical KASLR in effect. So change the kvm_info() to kvm_debug() to remove it from the log output. While at it, trim the output a bit more: IRQ numbers can be found in /proc/interrupts, and the HYP VA and vgic-v2 lines are not highly informational either. Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 14 March 2018, 18:29:14 UTC
413aa80 KVM: arm/arm64: Reset mapped IRQs on VM reset We currently don't allow resetting mapped IRQs from userspace, because their state is controlled by the hardware. But we do need to reset the state when the VM is reset, so we provide a function for the 'owner' of the mapped interrupt to reset the interrupt state. Currently only the timer uses mapped interrupts, so we call this function from the timer reset logic. Cc: stable@vger.kernel.org Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer") Signed-off-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 14 March 2018, 18:29:14 UTC
e21a4f3 KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN Calling vcpu_load() registers preempt notifiers for this vcpu and calls kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy lifting on arm/arm64 and will try to do things such as enabling the virtual timer and setting us up to handle interrupts from the timer hardware. Loading state onto hardware registers and enabling hardware to signal interrupts can be problematic when we're not actually about to run the VCPU, because it makes it difficult to establish the right context when handling interrupts from the timer, and it makes the register access code difficult to reason about. Luckily, now when we call vcpu_load in each ioctl implementation, we can simply remove the call from the non-KVM_RUN vcpu ioctls, and our kvm_arch_vcpu_load() is only used for loading vcpu content to the physical CPU when we're actually going to run the vcpu. Cc: stable@vger.kernel.org Fixes: 9b062471e52a ("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl") Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 14 March 2018, 18:29:14 UTC
62b06f8 KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending Our irq_is_pending() helper function accesses multiple members of the vgic_irq struct, so we need to hold the lock when calling it. Add that requirement as a comment to the definition and take the lock around the call in vgic_mmio_read_pending(), where we were missing it before. Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 14 March 2018, 18:28:41 UTC
49368c1 platform/x86: Fix dell driver init order Update the initcall ordering to satisfy the following dependency ordering: 1. DCDBAS, ACPI_WMI 2. DELL_SMBIOS, DELL_RBTN 3. DELL_LAPTOP, DELL_WMI By assigning them to the following initcall levels: subsys_initcall: DCDBAS, ACPI_WMI module_init: DELL_SMBIOS, DELL_RBTN late_initcall: DELL_LAPTOP, DELL_WMI Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Mario.Limonciello@dell.com Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 14 March 2018, 18:05:53 UTC
75073a6 platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled, DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to prevent a configuration where DELL_SMBIOS=y and either backend dependency =m. Update the comment accordingly. Cc: Mario Limonciello <mario.limonciello@dell.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 14 March 2018, 18:05:43 UTC
3032f8c Merge tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a small clump of USB fixes for 4.16-rc6. Nothing major, just a number of fixes in lots of different drivers, as well as a PHY driver fix that snuck into this tree. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: musb: Fix external abort in musb_remove on omap2430 phy: qcom-ufs: add MODULE_LICENSE tag usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM usbip: vudc: fix null pointer dereference on udc->lock xhci: Fix front USB ports on ASUS PRIME B350M-A usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" usb: usbmon: Read text within supplied buffer size usb: host: xhci-rcar: add support for r8a77965 USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h usb: xhci: dbc: Fix lockdep warning xhci: fix endpoint context tracer output Revert "typec: tcpm: Only request matching pdos" usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers usb: quirks: add control message delay for 1b1c:1b20 uas: fix comparison for error code usb: gadget: udc: renesas_usb3: add binging for r8a77965 usb: renesas_usbhs: add binding for r8a77965 usb: dwc2: fix STM32F7 USB OTG HS compatible dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding ... 14 March 2018, 17:05:59 UTC
6560ca4 Merge tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty core and serial driver fixes for 4.16-rc6. They resolve some newly reported bugs, as well as some very old ones, which is always nice to see. There is also a new device id added in here for good measure. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: fix bogus dev_err serial: sh-sci: prevent lockup on full TTY buffers serial: 8250_pci: Add Brainboxes UC-260 4 port serial device earlycon: add reg-offset to physical address before mapping serial: core: mark port as initialized in autoconfig serial: 8250_pci: Don't fail on multiport card class tty/serial: atmel: add new version check for usart tty: make n_tty_read() always abort if hangup is in progress 14 March 2018, 17:02:40 UTC
5e15d39 Merge tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.16-rc6 Two of them are lockdep fixes for the ashmem driver that have been reported by a number of people recently. The last one is a fix for the comedi driver core. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: Fix possible deadlock in ashmem_ioctl staging: comedi: fix comedi_nsamples_left. staging: android: ashmem: Fix lockdep issue during llseek 14 March 2018, 16:59:45 UTC
1a7f749 Merge tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux Pull auxdisplay fixes from Miguel Ojeda: "Silence a few warnings in auxdisplay. - a couple of uninitialized warnings reported by the build service - a doc comment warning under W=1 - three fall-through comments not recognized under W=1" * tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux: auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings auxdisplay: panel: Change comments to silence fallthrough warnings 14 March 2018, 16:46:14 UTC
af1d830 jump_label: Fix sparc64 warning The kbuild test robot reported the following warning on sparc64: kernel/jump_label.c: In function '__jump_label_update': kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code); On sparc64, the jump_label entry->code field is of type u32, but pointers are 64-bit. Silence the warning by casting entry->code to an unsigned long before casting it to a pointer. This is also what the sparc jump label code does. Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Borislav Petkov <bp@suse.de> Cc: "David S . Miller" <davem@davemloft.net> Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com 14 March 2018, 15:35:26 UTC
a14bff1 x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels In the following commit: 9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool") ... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels, but we did not annotate the 32-bit path. Annotate it similarly. Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 14 March 2018, 12:24:31 UTC
b506978 x86/vm86/32: Fix POPF emulation POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by: Stas Sergeev <stsp@list.ru> Reported-by: Bart Oldeman <bartoldeman@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86") Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 14 March 2018, 08:21:01 UTC
78393fd selftests/x86/entry_from_vm86: Add test cases for POPF POPF is currently broken -- add tests to catch the error. This results in: [RUN] POPF with VIP set and IF clear from vm86 mode [INFO] Exited vm86 mode due to STI [FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf) because POPF currently fails to check IF before reporting a pending interrupt. This patch also makes the FAIL message a bit more informative. Reported-by: Bart Oldeman <bartoldeman@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 14 March 2018, 08:21:01 UTC
327d53d selftests/x86/entry_from_vm86: Exit with 1 if we fail Fix a logic error that caused the test to exit with 0 even if test cases failed. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bartoldeman@gmail.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 14 March 2018, 08:21:01 UTC
a8b48a4 KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry This fixes a bug where the trap number that is returned by __kvmppc_vcore_entry gets corrupted. The effect of the corruption is that IPIs get ignored on POWER9 systems when the IPI is sent via a doorbell interrupt to a CPU which is executing in a KVM guest. The effect of the IPI being ignored is often that another CPU locks up inside smp_call_function_many() (and if that CPU is holding a spinlock, other CPUs then lock up inside raw_spin_lock()). The trap number is currently held in register r12 for most of the assembly-language part of the guest exit path. In that path, we call kvmppc_subcore_exit_guest(), which is a C function, without restoring r12 afterwards. Depending on the kernel config and the compiler, it may modify r12 or it may not, so some config/compiler combinations see the bug and others don't. To fix this, we arrange for the trap number to be stored on the stack from the 'guest_bypass:' label until the end of the function, then the trap number is loaded and returned in r12 as before. Cc: stable@vger.kernel.org # v4.8+ Fixes: fd7bacbca47a ("KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt") Signed-off-by: Paul Mackerras <paulus@ozlabs.org> 14 March 2018, 04:10:50 UTC
e8f74a0 dm mpath: eliminate need to use scsi_device_from_queue Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name() -- whose implementation uses scsi_device_from_queue() to avoid trying to access SCSI-specific resources from non-SCSI devices. Fixes buildbot reported issue when CONFIG_SCSI isn't set: ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined! Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Signed-off-by: Mike Snitzer <snitzer@redhat.com> 13 March 2018, 19:09:56 UTC
c373667 dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointer Initialize all the scsi_dh related 'struct multipath' members regardless of whether a scsi_dh is in use or not. The subtle (and fragile) SCSI-assuming legacy code clearly needs further decoupling from non-SCSI (and/or developer understanding). Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Reported-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> 13 March 2018, 19:09:56 UTC
26a2c54 auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings The warnings are: drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized] At lines 109 and 207. Reported by Geert using the build service several times, e.g.: https://lkml.org/lkml/2018/2/19/303 They are two false positives, since num_chars > 0 in the three present configurations (boston, malta, sead3). Initialize to 0 in order to silence the warning. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 13 March 2018, 17:16:38 UTC
6a78b4d auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings Compiling with W=1 with gcc 7.2.0 gives 2 warnings: drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or member 't' not described in 'img_ascii_lcd_scroll' drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function parameter 'arg' description in 'img_ascii_lcd_scroll' Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 13 March 2018, 17:13:34 UTC
5617c59 auxdisplay: panel: Change comments to silence fallthrough warnings Compiling with W=1 with gcc 7.2.0 gives 3 warnings like: drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’: drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Cc: Willy Tarreau <w@1wt.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 13 March 2018, 17:12:09 UTC
94e46a4 usb: musb: Fix external abort in musb_remove on omap2430 This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 13 March 2018, 15:36:59 UTC
79832f0 efi/libstub/tpm: Initialize pointer variables to zero for mixed mode As reported by Jeremy Cline, running the new TPM libstub code in mixed mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking the TCG2 protocol, or when accessing the log_tbl pool allocation. The reason turns out to be that in both cases, the 64-bit pointer variables are not fully initialized by the 32-bit EFI code, and so we should take care to zero initialize these variables beforehand, or we'll end up dereferencing bogus pointers. Reported-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hdegoede@redhat.com Cc: jarkko.sakkinen@linux.intel.com Cc: javierm@redhat.com Cc: linux-efi@vger.kernel.org Cc: tweek@google.com Link: http://lkml.kernel.org/r/20180313140922.17266-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 13 March 2018, 14:28:29 UTC
f1430f1 drm/i915: Kick the rps worker when changing the boost frequency The boost frequency is only applied from the RPS worker while someone is waiting on a request and requested a boost. As such, when the user wishes to change the frequency, we have to kick the worker in order to re-evaluate whether to apply the boost frequency. v2: Check num_waiters to decide if we should kick the worker to handle boosting. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180308142648.4016-1-chris@chris-wilson.co.uk (cherry picked from commit 59cd31f177b34deb834a5c97478502741be1cf2e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 12 March 2018, 18:24:49 UTC
82813ba drm/i915: Only prune fences after wait-for-all Currently, we only allow ourselves to prune the fences so long as all the waits completed (i.e. all the fences we checked were signaled), and that the reservation snapshot did not change across the wait. However, if we only waited for a subset of the reservation object, i.e. just waiting for the last writer to complete as opposed to all readers as well, then we would erroneously conclude we could prune the fences as indeed although all of our waits were successful, they did not represent the totality of the reservation object. v2: We only need to check the shared fences due to construction (i.e. all of the shared fences will be later than the exclusive fence, if any). Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307171303.29466-1-chris@chris-wilson.co.uk (cherry picked from commit fa73055b8442c97b3ba7cd0aa57cd2ad32124201) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 12 March 2018, 18:24:44 UTC
e8cd714 drm/i915: Enable VBT based BL control for DP Currently, BXT_PP is hardcoded with value '0'. It practically disabled eDP backlight on MRB (BXT) platform. This patch will tell which BXT_PP registers (there are two set of PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing table) and this will enabled eDP backlight controller on MRB (BXT) platform. v2: - Remove unnecessary information in commit message. - Assign vbt.backlight.controller to a backlight_controller variable and return the variable value. v3: - Rebased to latest code base. - updated commit title. Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com (cherry picked from commit 73c0fcac97bf7f4a6a61b825b205d1cf127cfca7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 12 March 2018, 18:23:47 UTC
fc6eabb Merge tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Hightlights include the following stable fixes: - NFS: Fix an incorrect type in struct nfs_direct_req - pNFS: Prevent the layout header refcount going to zero in pnfs_roc() - NFS: Fix unstable write completion" * tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix unstable write completion pNFS: Prevent the layout header refcount going to zero in pnfs_roc() NFS: Fix an incorrect type in struct nfs_direct_req 12 March 2018, 17:47:03 UTC
db45dc9 Merge tag 'asoc-fix-v4.16-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.16 This is a fairly standard collection of fixes, there's no changes to the core here just a bunch of small device specific changes for single drivers plus an update to the MAINTAINERS file for the sgl5000. 12 March 2018, 16:30:38 UTC
a3e39ed Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/hdmi-codec', 'asoc/fix/rt5651', 'asoc/fix/samsung', 'asoc/fix/sgtl5000', 'asoc/fix/sunxi' and 'asoc/fix/wm-adsp' into asoc-linus 12 March 2018, 16:14:07 UTC
40088dc ALSA: hda - Revert power_save option default value With the commit 1ba8f9d30817 ("ALSA: hda: Add a power_save blacklist"), we changed the default value of power_save option to -1 for processing the power-save blacklist. Unfortunately, this seems breaking user-space applications that actually read the power_save parameter value via sysfs and judge / adjust the power-saving status. They see the value -1 as if the power-save is turned off, although the actual value is taken from CONFIG_SND_HDA_POWER_SAVE_DEFAULT and it can be a positive. So, overall, passing -1 there was no good idea. Let's partially revert it -- at least for power_save option default value is restored again to CONFIG_SND_HDA_POWER_SAVE_DEFAULT. Meanwhile, in this patch, we keep the blacklist behavior and make is adjustable via the new option, pm_blacklist. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073 Fixes: 1ba8f9d30817 ("ALSA: hda: Add a power_save blacklist") Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 March 2018, 13:16:08 UTC
914a020 Merge tag 'phy-for-4.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus phy: for 4.16-rc *) Fix a Kbuild failure in qcom-ufs Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 12 March 2018, 12:13:42 UTC
7958b22 x86/cpufeatures: Add Intel PCONFIG cpufeature CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kai Huang <kai.huang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 March 2018, 11:09:53 UTC
1da961d x86/cpufeatures: Add Intel Total Memory Encryption cpufeature CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory Encryption. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kai Huang <kai.huang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 March 2018, 11:09:53 UTC
59fba08 phy: qcom-ufs: add MODULE_LICENSE tag While the specific UFS PHY drivers (14nm and 20nm) have a module license, the common base module does not, leading to a Kbuild failure: WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable' This adds a module description and license tag to fix the build. I added both Yaniv and Vivek as authors here, as Yaniv sent the initial submission, while Vivek did most of the work since. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 12 March 2018, 09:41:59 UTC
0c8efd6 Linux 4.16-rc5 12 March 2018, 00:25:09 UTC
ed58d66 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Yet another pile of melted spectrum related updates: - Drop native vsyscall support finally as it causes more trouble than benefit. - Make microcode loading more robust. There were a few issues especially related to late loading which are now surfacing because late loading of the IB* microcodes addressing spectre issues has become more widely used. - Simplify and robustify the syscall handling in the entry code - Prevent kprobes on the entry trampoline code which lead to kernel crashes when the probe hits before CR3 is updated - Don't check microcode versions when running on hypervisors as they are considered as lying anyway. - Fix the 32bit objtool build and a coment typo" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix kernel crash when probing .entry_trampoline code x86/pti: Fix a comment typo x86/microcode: Synchronize late microcode loading x86/microcode: Request microcode on the BSP x86/microcode/intel: Look into the patch cache first x86/microcode: Do not upload microcode if CPUs are offline x86/microcode/intel: Writeback and invalidate caches before updating microcode x86/microcode/intel: Check microcode revision before updating sibling threads x86/microcode: Get rid of struct apply_microcode_ctx x86/spectre_v2: Don't check microcode versions when running under hypervisors x86/vsyscall/64: Drop "native" vsyscalls x86/entry/64/compat: Save one instruction in entry_INT80_compat() x86/entry: Do not special-case clone(2) in compat entry x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls x86/syscalls: Use proper syscall definition for sys_ioperm() x86/entry: Remove stale syscall prototype x86/syscalls/32: Simplify $entry == $compat entries objtool: Fix 32-bit build 11 March 2018, 21:59:23 UTC
1ad5daa Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Just a single fix which adds a missing Kconfig dependency to avoid unmet dependency warnings" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency 11 March 2018, 21:55:15 UTC
ebb3762 Merge branch 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two small fixes for RAS/MCE: - Serialize sysfs changes to avoid concurrent modificaiton of underlying data - Add microcode revision to Machine Check records. This should have been there forever, but now with the broken microcode versions in the wild it has become important" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE: Serialize sysfs changes x86/MCE: Save microcode revision in machine check records 11 March 2018, 21:52:41 UTC
8ad4424 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Another set of perf updates: - Fix a Skylake Uncore event format declaration - Prevent perf pipe mode from crahsing which was caused by a missing buffer allocation - Make the perf top popup message which tells the user that it uses fallback mode on older kernels a debug message. - Make perf context rescheduling work correcctly - Robustify the jump error drawing in perf browser mode so it does not try to create references to NULL initialized offset entries - Make trigger_on() robust so it does not enable the trigger before everything is set up correctly to handle it - Make perf auxtrace respect the --no-itrace option so it does not try to queue AUX data for decoding. - Prevent having different number of field separators in CVS output lines when a counter is not supported. - Make the perf kallsyms man page usage behave like it does for all other perf commands. - Synchronize the kernel headers" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix ctx_event_type in ctx_resched() perf tools: Fix trigger class trigger_on() perf auxtrace: Prevent decoding when --no-itrace perf stat: Fix CVS output format for non-supported counters tools headers: Sync x86's cpufeatures.h tools headers: Sync copy of kvm UAPI headers perf record: Fix crash in pipe mode perf annotate browser: Be more robust when drawing jump arrows perf top: Fix annoying fallback message on older kernels perf kallsyms: Fix the usage on the man page perf/x86/intel/uncore: Fix Skylake UPI event format 11 March 2018, 21:49:49 UTC
02bf0ef Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "rt_mutex_futex_unlock() grew a new irq-off call site, but the function assumes that its always called from irq enabled context. Use (un)lock_irqsafe() to handle the new call site correctly" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites 11 March 2018, 21:46:54 UTC
a2f9e65 Merge tag 'irqchip-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 4.16-rc5 from Marc Zyngier - IMX GPCv2 cleanup - GICv3 iomem annontation fixes - GICv3 ITS minimal ITE allocation now matching the LPIs'. 11 March 2018, 20:57:12 UTC
abeb752 Merge tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Two small fixes are for this cycle: - fix max_chunk_size for rcar-dmac for R-Car Gen3 - fix clock resource of mv_xor_v2" * tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mv_xor_v2: Fix clock resource by adding a register clock dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3 11 March 2018, 20:07:14 UTC
d43be80 Merge tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "This is a single GPIO fix for the v4.16 series affecting the Renesas driver, and fixes wakeup from external stuff" * tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: rcar: Use wakeup_path i.s.o. explicit clock handling 11 March 2018, 20:05:15 UTC
3cd2c31 dmaengine: mv_xor_v2: Fix clock resource by adding a register clock On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 11 March 2018, 15:03:27 UTC
61b8b22 irqchip/irq-imx-gpcv2: Remove unused function imx_gpcv2_get_wakeup_source() is not used anywhere, so remove it. This fixes the following sparse warning: drivers/irqchip/irq-imx-gpcv2.c:34:5: warning: symbol 'imx_gpcv2_get_wakeup_source' was not declared. Should it be static? Fixes: e324c4dc4a59 ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 11 March 2018, 13:27:12 UTC
4f2c758 irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis When struct its_device instances are created, the nr_ites member will be set to a power of 2 that equals or exceeds the requested number of MSIs passed to the msi_prepare() callback. At the same time, the LPI map is allocated to be some multiple of 32 in size, where the allocated size may be less than the requested size depending on whether a contiguous range of sufficient size is available in the global LPI bitmap. This may result in the situation where the nr_ites < nr_lpis, and since nr_ites is what we program into the hardware when we map the device, the additional LPIs will be non-functional. For bog standard hardware, this does not really matter. However, in cases where ITS device IDs are shared between different PCIe devices, we may end up allocating these additional LPIs without taking into account that they don't actually work. So let's make nr_ites at least 32. This ensures that all allocated LPIs are 'live', and that its_alloc_device_irq() will fail when attempts are made to allocate MSIs beyond what was allocated in the first place. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [maz: updated comment] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 11 March 2018, 13:27:06 UTC
01c0b42 ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats() snd_pcm_oss_get_formats() has an obvious use-after-free around snd_mask_test() calls, as spotted by syzbot. The passed format_mask argument is a pointer to the hw_params object that is freed before the loop. What a surprise that it has been present since the original code of decades ago... Reported-by: syzbot+4090700a4f13fccaf648@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 11 March 2018, 09:25:10 UTC
back to top