Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
11da3a7 Linus Torvalds 10 September 2018, 00:26:43 UTC Linux 4.19-rc3 10 September 2018, 00:26:43 UTC
9a56827 Linus Torvalds 09 September 2018, 14:05:15 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Prevent multiplication result truncation on 32bit. Introduced with the early timestamp reworrk. - Ensure microcode revision storage to be consistent under all circumstances - Prevent write tearing of PTEs - Prevent confusion of user and kernel reegisters when dumping fatal signals verbosely - Make an error return value in a failure path of the vector allocation negative. Returning EINVAL might the caller assume success and causes further wreckage. - A trivial kernel doc warning fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use WRITE_ONCE() when setting PTEs x86/apic/vector: Make error return value negative x86/process: Don't mix user/kernel regs in 64bit __show_regs() x86/tsc: Prevent result truncation on 32bit x86: Fix kernel-doc atomic.h warnings x86/microcode: Update the new microcode revision unconditionally x86/microcode: Make sure boot_cpu_data.microcode is up-to-date 09 September 2018, 14:05:15 UTC
3567994 Linus Torvalds 09 September 2018, 13:55:27 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping fixes from Thomas Gleixner: "Two fixes for timekeeping: - Revert to the previous kthread based update, which is unfortunately required due to lock ordering issues. The removal caused boot failures on old Core2 machines. Add a proper comment why the thread needs to stay to prevent accidental removal in the future. - Fix a silly typo in a function declaration" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Revert "Remove kthread" timekeeping: Fix declaration of read_persistent_wall_and_boot_offset() 09 September 2018, 13:55:27 UTC
225ad3c Linus Torvalds 09 September 2018, 13:49:29 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip fix from Thomas Gleixner: "A single fix to prevent allocating excessive memory in the GIC/ITS driver. While the subject of the patch might suggest otherwise this is a real fix as some SoCs exceed the memory allocation limits and fail to boot" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint 09 September 2018, 13:49:29 UTC
e0a0d05 Linus Torvalds 09 September 2018, 13:48:06 UTC Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu hotplug fixes from Thomas Gleixner: "Two fixes for the hotplug state machine code: - Move the misplaces smb() in the hotplug thread function to the proper place, otherwise a half update control struct could be observed - Prevent state corruption on error rollback, which causes the state to advance by one and as a consequence skip it in the bringup sequence" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Prevent state corruption on error rollback cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun() 09 September 2018, 13:48:06 UTC
3243a89 Linus Torvalds 09 September 2018, 12:54:05 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random driver fix from Ted Ts'o: "Fix things so the choice of whether or not to trust RDRAND to initialize the CRNG is configurable via the boot option random.trust_cpu={on,off}" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: make CPU trust a boot parameter 09 September 2018, 12:54:05 UTC
1d22577 Linus Torvalds 09 September 2018, 12:42:11 UTC Merge tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - make setlocalversion more robust about -dirty check - loosen the pkg-config requirement for Kconfig - change missing depmod to a warning from an error - warn modules_install when System.map is missing * tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modules_install: warn when missing System.map file kbuild: make missing $DEPMOD a Warning instead of an Error kconfig: do not require pkg-config on make {menu,n}config kconfig: remove a spurious self-assignment scripts/setlocalversion: git: Make -dirty check more robust 09 September 2018, 12:42:11 UTC
f0b0d88 Randy Dunlap 06 September 2018, 23:37:24 UTC kbuild: modules_install: warn when missing System.map file If there is no System.map file for "make modules_install", scripts/depmod.sh will silently exit with success, having done nothing. Since this is an unexpected situation, change it to report a Warning for the missing file. The behavior is not changed except for the Warning message. The (previous) silent success and new Warning can be reproduced by: $ make mrproper; make defconfig $ make modules; make modules_install and since System.map is produced by "make vmlinux", the steps above omit producing the System.map file. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 09 September 2018, 00:14:07 UTC
f8f6538 Linus Torvalds 08 September 2018, 22:52:45 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Radim Krčmář: "ARM: - Fix a VFP corruption in 32-bit guest - Add missing cache invalidation for CoW pages - Two small cleanups s390: - Fallout from the hugetlbfs support: pfmf interpretion and locking - VSIE: fix keywrapping for nested guests PPC: - Fix a bug where pages might not get marked dirty, causing guest memory corruption on migration - Fix a bug causing reads from guest memory to use the wrong guest real address for very large HPT guests (>256G of memory), leading to failures in instruction emulation. x86: - Fix out of bound access from malicious pv ipi hypercalls (introduced in rc1) - Fix delivery of pending interrupts when entering a nested guest, preventing arbitrarily late injection - Sanitize kvm_stat output after destroying a guest - Fix infinite loop when emulating a nested guest page fault and improve the surrounding emulation code - Two minor cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: LAPIC: Fix pv ipis out-of-bounds access KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2 arm64: KVM: Remove pgd_lock KVM: Remove obsolete kvm_unmap_hva notifier backend arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting KVM: s390: vsie: copy wrapping keys to right place KVM: s390: Fix pfmf and conditional skey emulation tools/kvm_stat: re-animate display of dead guests tools/kvm_stat: indicate dead guests as such tools/kvm_stat: handle guest removals more gracefully tools/kvm_stat: don't reset stats when setting PID filter for debugfs tools/kvm_stat: fix updates for dead guests tools/kvm_stat: fix handling of invalid paths in debugfs provider tools/kvm_stat: fix python3 issues KVM: x86: Unexport x86_emulate_instruction() KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction() KVM: x86: Do not re-{try,execute} after failed emulation in L2 KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault ... 08 September 2018, 22:52:45 UTC
0f3aa48 Linus Torvalds 08 September 2018, 22:38:57 UTC Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes who have trickled in: - MMC bus width fixup for some Allwinner platforms - Fix for NULL deref in ti-aemif when no platform data is passed in - Fix div by 0 in SCMI code - Add a missing module alias in a new RPi driver" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: ti-aemif: fix a potential NULL-pointer dereference firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero hwmon: rpi: add module alias to raspberrypi-hwmon arm64: allwinner: dts: h6: fix Pine H64 MMC bus width 08 September 2018, 22:38:57 UTC
a132bb9 Olof Johansson 08 September 2018, 17:04:37 UTC Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.19 Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing from the device tree. This was added in 4.19-rc1. * tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: dts: h6: fix Pine H64 MMC bus width Signed-off-by: Olof Johansson <olof@lixom.net> 08 September 2018, 17:04:37 UTC
9bc4f28 Nadav Amit 02 September 2018, 18:14:50 UTC x86/mm: Use WRITE_ONCE() when setting PTEs When page-table entries are set, the compiler might optimize their assignment by using multiple instructions to set the PTE. This might turn into a security hazard if the user somehow manages to use the interim PTE. L1TF does not make our lives easier, making even an interim non-present PTE a security hazard. Using WRITE_ONCE() to set PTEs and friends should prevent this potential security hazard. I skimmed the differences in the binary with and without this patch. The differences are (obviously) greater when CONFIG_PARAVIRT=n as more code optimizations are possible. For better and worse, the impact on the binary with this patch is pretty small. Skimming the code did not cause anything to jump out as a security hazard, but it seems that at least move_soft_dirty_pte() caused set_pte_at() to use multiple writes. Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com 08 September 2018, 10:30:36 UTC
47b7360 Thomas Gleixner 08 September 2018, 10:07:26 UTC x86/apic/vector: Make error return value negative activate_managed() returns EINVAL instead of -EINVAL in case of error. While this is unlikely to happen, the positive return value would cause further malfunction at the call site. Fixes: 2db1f959d9dc ("x86/vector: Handle managed interrupts proper") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org 08 September 2018, 10:12:40 UTC
d7b686e Linus Torvalds 08 September 2018, 00:30:40 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - bugfixes for uniphier, i801, and xiic drivers - ID removal (never produced) for imx - one MAINTAINER addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xiic: Record xilinx i2c with Zynq fragment i2c: xiic: Make the start and the byte count write atomic i2c: i801: fix DNV's SMBCTRL register offset i2c: imx-lpi2c: Remove mx8dv compatible entry dt-bindings: imx-lpi2c: Remove mx8dv compatible entry i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP i2c: uniphier: issue STOP only for last message or I2C_M_STOP 08 September 2018, 00:30:40 UTC
2c34a0e Linus Torvalds 07 September 2018, 23:45:32 UTC Merge tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Fix for atomic_fetch_#op [Will Deacon] - Enable per device IOC [Eugeniy Paltsev] - Remove redundant gcc version checks [Masahiro Yamada] - Miscll platform config/DT updates [Alexey Brodkin] * tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: don't check for HIGHMEM pages in arch_dma_alloc ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled ARC: dma [IOC] Enable per device io coherency ARC: dma [IOC]: mark DMA devices connected as dma-coherent ARC: atomics: unbork atomic_fetch_##op() arc: remove redundant GCC version checks ARC: sort Kconfig ARC: cleanup show_faulting_vma() ARC: [plat-axs*]: Enable SWAP ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel ARC: configs: cleanup 07 September 2018, 23:45:32 UTC
ecfe951 David Howells 07 September 2018, 22:55:17 UTC afs: Fix cell specification to permit an empty address list Fix the cell specification mechanism to allow cells to be pre-created without having to specify at least one address (the addresses will be upcalled for). This allows the cell information preload service to avoid the need to issue loads of DNS lookups during boot to get the addresses for each cell (500+ lookups for the 'standard' cell list[*]). The lookups can be done later as each cell is accessed through the filesystem. Also remove the print statement that prints a line every time a new cell is added. [*] There are 144 cells in the list. Each cell is first looked up for an SRV record, and if that fails, for an AFSDB record. These get a list of server names, each of which then has to be looked up to get the addresses for that server. E.g.: dig srv _afs3-vlserver._udp.grand.central.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 September 2018, 23:39:44 UTC
3d0e7a9 Linus Torvalds 07 September 2018, 19:15:37 UTC Merge tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fixes from Shaohua Li: - Fix a locking issue for md-cluster (Guoqing) - Fix a sync crash for raid10 (Ni) - Fix a reshape bug with raid5 cache enabled (me) * tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md-cluster: release RESYNC lock after the last resync message RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 md/raid5-cache: disable reshape completely 07 September 2018, 19:15:37 UTC
a12ed06 Linus Torvalds 07 September 2018, 17:57:59 UTC Merge tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "Two rbd patches to complete support for images within namespaces that went into -rc1 and a use-after-free fix. The rbd changes have been sitting in a branch for quite a while but couldn't be included into the -rc1 pull request because of a pending wire protocol backwards compatibility fixup that only got committed early this week" * tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client: rbd: support cloning across namespaces rbd: factor out get_parent_info() ceph: avoid a use-after-free in ceph_destroy_options() 07 September 2018, 17:57:59 UTC
d042a24 Linus Torvalds 07 September 2018, 17:54:46 UTC Merge tag 'for_v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify fix from Jan Kara: "A small fsnotify fix from Amir" * tag 'for_v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: fix ignore mask logic in fsnotify() 07 September 2018, 17:54:46 UTC
4ff8a14 Linus Torvalds 07 September 2018, 17:37:23 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "Just one small fix here, preventing a VM_WARN_ON when a !present PMD/PUD is "freed" as part of a huge ioremap() operation. The correct behaviour is to skip the free silently in this case, which is a little weird (the function is a bit of a misnomer), but it follows the x86 implementation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix erroneous warnings in page freeing functions 07 September 2018, 17:37:23 UTC
5393734 Linus Torvalds 07 September 2018, 17:25:26 UTC Merge tag 'acpi-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a regression from the 4.18 cycle in the ACPI driver for Intel SoCs (LPSS) and prevent dmi_check_system() from being called on non-x86 systems in the ACPI core. Specifics: - Fix a power management regression in the ACPI driver for Intel SoCs (LPSS) introduced by a system-wide suspend/resume fix during the 4.18 cycle (Zhang Rui). - Prevent dmi_check_system() from being called on non-x86 systems in the ACPI core (Jean Delvare)" * tag 'acpi-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / LPSS: Force LPSS quirks on boot ACPI / bus: Only call dmi_check_system() on X86 07 September 2018, 17:25:26 UTC
69ddce9 Linus Torvalds 07 September 2018, 17:20:31 UTC Merge tag 'sound-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few small fixes: - a fix for the recursive work cancellation in a specific HD-audio operation mode - a fix for potentially uninitialized memory access via rawmidi - the register bit access fixes for ASoC HD-audio" * tag 'sound-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: Fix several mismatch for register mask and value ALSA: rawmidi: Initialize allocated buffers ALSA: hda - Fix cancel_work_sync() stall from jackpoll work 07 September 2018, 17:20:31 UTC
bdf7ffc Wanpeng Li 30 August 2018, 02:03:30 UTC KVM: LAPIC: Fix pv ipis out-of-bounds access Dan Carpenter reported that the untrusted data returns from kvm_register_read() results in the following static checker warning: arch/x86/kvm/lapic.c:576 kvm_pv_send_ipi() error: buffer underflow 'map->phys_map' 's32min-s32max' KVM guest can easily trigger this by executing the following assembly sequence in Ring0: mov $10, %rax mov $0xFFFFFFFF, %rbx mov $0xFFFFFFFF, %rdx mov $0, %rsi vmcall As this will cause KVM to execute the following code-path: vmx_handle_exit() -> handle_vmcall() -> kvm_emulate_hypercall() -> kvm_pv_send_ipi() which will reach out-of-bounds access. This patch fixes it by adding a check to kvm_pv_send_ipi() against map->max_apic_id, ignoring destinations that are not present and delivering the rest. We also check whether or not map->phys_map[min + i] is NULL since the max_apic_id is set to the max apic id, some phys_map maybe NULL when apic id is sparse, especially kvm unconditionally set max_apic_id to 255 to reserve enough space for any xAPIC ID. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> [Add second "if (min > map->max_apic_id)" to complete the fix. -Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> 07 September 2018, 16:38:43 UTC
b5861e5 Liran Alon 03 September 2018, 12:20:22 UTC KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2 Consider the case L1 had a IRQ/NMI event until it executed VMLAUNCH/VMRESUME which wasn't delivered because it was disallowed (e.g. interrupts disabled). When L1 executes VMLAUNCH/VMRESUME, L0 needs to evaluate if this pending event should cause an exit from L2 to L1 or delivered directly to L2 (e.g. In case L1 don't intercept EXTERNAL_INTERRUPT). Usually this would be handled by L0 requesting a IRQ/NMI window by setting VMCS accordingly. However, this setting was done on VMCS01 and now VMCS02 is active instead. Thus, when L1 executes VMLAUNCH/VMRESUME we force L0 to perform pending event evaluation by requesting a KVM_REQ_EVENT. Note that above scenario exists when L1 KVM is about to enter L2 but requests an "immediate-exit". As in this case, L1 will disable-interrupts and then send a self-IPI before entering L2. Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> 07 September 2018, 16:38:42 UTC
564ad0a Radim Krčmář 07 September 2018, 16:38:25 UTC Merge tag 'kvm-arm-fixes-for-v4.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm Fixes for KVM/ARM for Linux v4.19 v2: - Fix a VFP corruption in 32-bit guest - Add missing cache invalidation for CoW pages - Two small cleanups 07 September 2018, 16:38:25 UTC
ed2ef29 Radim Krčmář 07 September 2018, 16:30:47 UTC Merge tag 'kvm-s390-master-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux KVM: s390: Fixes for 4.19 - Fallout from the hugetlbfs support: pfmf interpretion and locking - VSIE: fix keywrapping for nested guests 07 September 2018, 16:30:47 UTC
df3190e Steven Price 13 August 2018, 16:04:53 UTC arm64: KVM: Remove pgd_lock The lock has never been used and the page tables are protected by mmu_lock in struct kvm. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> 07 September 2018, 13:06:03 UTC
a35381e Marc Zyngier 23 August 2018, 09:18:14 UTC KVM: Remove obsolete kvm_unmap_hva notifier backend kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to deal with. Drop the now obsolete code. Fixes: fb1522e099f0 ("KVM: update to new mmu_notifier semantic v2") Cc: James Hogan <jhogan@kernel.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> 07 September 2018, 13:06:02 UTC
7d14919 Marc Zyngier 23 August 2018, 10:51:43 UTC arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD If trapping FPSIMD in the context of an AArch32 guest, it is critical to set FPEXC32_EL2.EN to 1 so that the trapping is taken to EL2 and not EL1. Conversely, it is just as critical *not* to set FPEXC32_EL2.EN to 1 if we're not going to trap FPSIMD, as we then corrupt the existing VFP state. Moving the call to __activate_traps_fpsimd32 to the point where we know for sure that we are going to trap ensures that we don't set that bit spuriously. Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Cc: stable@vger.kernel.org # v4.18 Cc: Dave Martin <dave.martin@arm.com> Reported-by: Alexander Graf <agraf@suse.de> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> 07 September 2018, 13:05:50 UTC
694556d Marc Zyngier 23 August 2018, 08:58:27 UTC KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW When triggering a CoW, we unmap the RO page via an MMU notifier (invalidate_range_start), and then populate the new PTE using another one (change_pte). In the meantime, we'll have copied the old page into the new one. The problem is that the data for the new page is sitting in the cache, and should the guest have an uncached mapping to that page (or its MMU off), following accesses will bypass the cache. In a way, this is similar to what happens on a translation fault: We need to clean the page to the PoC before mapping it. So let's just do that. This fixes a KVM unit test regression observed on a HiSilicon platform, and subsequently reproduced on Seattle. Fixes: a9c0e12ebee5 ("KVM: arm/arm64: Only clean the dcache on translation fault") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> 07 September 2018, 13:05:40 UTC
da4dfaf Michal Simek 07 September 2018, 06:02:05 UTC i2c: xiic: Record xilinx i2c with Zynq fragment Include xilinx soft i2c controller to Zynq fragment to make clear who is responsible for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 September 2018, 11:04:45 UTC
a6b7eb3 Rafael J. Wysocki 07 September 2018, 08:05:20 UTC Merge branch 'acpi-bus' Merge ACPI core fix to avoid calling dmi_check_system() on non-x86. * acpi-bus: ACPI / bus: Only call dmi_check_system() on X86 07 September 2018, 08:05:20 UTC
a49a9dc Linus Torvalds 07 September 2018, 03:19:57 UTC Merge tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Seems to have been overly quiet this week so I expect next week will be more stuff, just one pull from Rodrigo with i915 fixes in it. Quoting Rodrigo: 'The critical fix here on display side is the DP MST regression one. But this pull also include fixes for DP SST, small VDSC register fix and GVT's bucked with "BXT fixes, two guest warning fixes, dmabuf format mod fix and one for recent multiple VM timeout failure'." * tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drm: drm/i915/dp_mst: Fix enabling pipe clock for all streams drm/i915/dsc: Fix PPS register definition macros for 2nd VDSC engine drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse" drm/i915/gvt: Give new born vGPU higher scheduling chance drm/i915/gvt: Fix drm_format_mod value for vGPU plane drm/i915/gvt: move intel_runtime_pm_get out of spin_lock in stop_schedule drm/i915/gvt: Handle GEN9_WM_CHICKEN3 with F_CMD_ACCESS. drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY drm/i915/gvt: emulate gen9 dbuf ctl register access 07 September 2018, 03:19:57 UTC
631267f Linus Torvalds 07 September 2018, 02:35:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "A single change to fix booting on ColdFire platforms that have RAM starting at a non-0 address" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix early memory reservation for ColdFire MMU systems 07 September 2018, 02:35:30 UTC
67c6ed7 Dave Airlie 07 September 2018, 01:06:58 UTC Merge tag 'drm-intel-fixes-2018-09-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes The critical fix here on display side is the DP MST regression one. But this pull also include fixes for DP SST, small VDSC register fix and GVT's bucked with "BXT fixes, two guest warning fixes, dmabuf format mod fix and one for recent multiple VM timeout failure." Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905183000.GA2151@intel.com 07 September 2018, 01:07:03 UTC
2601dd3 Linus Torvalds 06 September 2018, 22:42:10 UTC Merge tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Paul Burton: "A single fix for v4.19-rc3, resolving a problem with our VDSO data page for systems with dcache aliasing. Those systems could previously observe stale data, causing clock_gettime() & gettimeofday() to return incorrect values" * tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: VDSO: Match data page cache colouring when D$ aliases 06 September 2018, 22:42:10 UTC
c6ff25c Linus Torvalds 06 September 2018, 22:39:11 UTC Merge tag '4.19-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Four small SMB3 fixes, three for stable, and one minor debug clarification" * tag '4.19-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: connect to servername instead of IP for IPC$ share smb3: check for and properly advertise directory lease support smb3: minor debugging clarifications in rfc1001 len processing SMB3: Backup intent flag missing for directory opens with backupuid mounts fs/cifs: don't translate SFM_SLASH (U+F026) to backslash 06 September 2018, 22:39:11 UTC
e2c631b Peter Zijlstra 05 September 2018, 08:41:58 UTC clocksource: Revert "Remove kthread" I turns out that the silly spawn kthread from worker was actually needed. clocksource_watchdog_kthread() cannot be called directly from clocksource_watchdog_work(), because clocksource_select() calls timekeeping_notify() which uses stop_machine(). One cannot use stop_machine() from a workqueue() due lock inversions wrt CPU hotplug. Revert the patch but add a comment that explain why we jump through such apparently silly hoops. Fixes: 7197e77abcb6 ("clocksource: Remove kthread") Reported-by: Siegfried Metz <frame@mailbox.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Kevin Shanahan <kevin@shanahan.id.au> Tested-by: viktor_jaegerskuepper@freenet.de Tested-by: Siegfried Metz <frame@mailbox.org> Cc: rafael.j.wysocki@intel.com Cc: len.brown@intel.com Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: bjorn.andersson@linaro.org Link: https://lkml.kernel.org/r/20180905084158.GR24124@hirez.programming.kicks-ass.net 06 September 2018, 21:38:35 UTC
ca16eb3 Linus Torvalds 06 September 2018, 21:01:15 UTC Merge tag 'for-linus-20180906' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Small collection of fixes that should go into this release. This contains: - Small series that fixes a race between blkcg teardown and writeback (Dennis Zhou) - Fix disallowing invalid block size settings from the nbd ioctl (me) - BFQ fix for a use-after-free on last release of a bfqg (Konstantin Khlebnikov) - Fix for the "don't warn for flush" fix (Mikulas)" * tag 'for-linus-20180906' of git://git.kernel.dk/linux-block: block: bfq: swap puts in bfqg_and_blkg_put block: don't warn when doing fsync on read-only devices nbd: don't allow invalid blocksize settings blkcg: use tryget logic when associating a blkg with a bio blkcg: delay blkg destruction until after writeback has finished Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()" 06 September 2018, 21:01:15 UTC
ae7304c Shubhrajyoti Datta 03 September 2018, 09:41:11 UTC i2c: xiic: Make the start and the byte count write atomic Disable interrupts while configuring the transfer and enable them back. We have below as the programming sequence 1. start and slave address 2. byte count and stop In some customer platform there was a lot of interrupts between 1 and 2 and after slave address (around 7 clock cyles) if 2 is not executed then the transaction is nacked. To fix this case make the 2 writes atomic. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [wsa: added a newline for better readability] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 06 September 2018, 18:49:09 UTC
4cb205c Jia He 28 August 2018, 04:53:26 UTC irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint Commit fe8e93504ce8 ("irqchip/gic-v3-its: Use full range of LPIs"), removes the cap for lpi_id_bits, which causes the following warning to trigger on a QDF2400 server: WARNING: CPU: 0 PID: 0 at mm/page_alloc.c:4066 __alloc_pages_nodemask ... Call trace: __alloc_pages_nodemask+0x2d8/0x1188 alloc_pages_current+0x8c/0xd8 its_allocate_prop_table+0x5c/0xb8 its_init+0x220/0x3c0 gic_init_bases+0x250/0x380 gic_acpi_init+0x16c/0x2a4 In its_alloc_lpi_tables(), lpi_id_bits is 24 in QDF2400. The allocation in allocate_prop_table() tries therefore to allocate 16M (order 12 if pagesize=4k), which triggers the warning. As said by MarcL Capping lpi_id_bits at 16 (which is what we had before) is plenty, will save a some memory, and gives some margin before we need to push it up again. Bring the upper limit of lpi_id_bits back to prevent Fixes: fe8e93504ce8 ("irqchip/gic-v3-its: Use full range of LPIs") Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jia He <jia.he@hxt-semitech.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Olof Johansson <olof@lixom.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/1535432006-2304-1-git-send-email-jia.he@hxt-semitech.com 06 September 2018, 18:31:59 UTC
d5274b3 Konstantin Khlebnikov 06 September 2018, 08:05:44 UTC block: bfq: swap puts in bfqg_and_blkg_put Fix trivial use-after-free. This could be last reference to bfqg. Fixes: 8f9bebc33dd7 ("block, bfq: access and cache blkg data only when safe") Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk> 06 September 2018, 17:32:58 UTC
6b45a2b Bartosz Golaszewski 06 September 2018, 12:12:19 UTC memory: ti-aemif: fix a potential NULL-pointer dereference Platform data pointer may be NULL. We check it everywhere but in one place. Fix it. Fixes: 8af70cd2ca50 ("memory: aemif: add support for board files") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net> 06 September 2018, 17:04:07 UTC
fac880c Mark Rutland 05 September 2018, 16:38:57 UTC arm64: fix erroneous warnings in page freeing functions In pmd_free_pte_page() and pud_free_pmd_page() we try to warn if they hit a present non-table entry. In both cases we'll warn for non-present entries, as the VM_WARN_ON() only checks the entry is not a table entry. This has been observed to result in warnings when booting a v4.19-rc2 kernel under qemu. Fix this by bailing out earlier for non-present entries. Fixes: ec28bb9c9b0826d7 ("arm64: Implement page table free interfaces") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 06 September 2018, 17:01:13 UTC
e312b6d Olof Johansson 06 September 2018, 17:00:03 UTC Merge tag 'arm-soc/for-4.19/drivers-fixes' of https://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM/ARM64 SoCs drivers fixes for 4.19, please pull the following: - Peter adds an alias to the Raspberry Pi HWMON driver that was just merged as part of the 4.19 merge window * tag 'arm-soc/for-4.19/drivers-fixes' of https://github.com/Broadcom/stblinux: hwmon: rpi: add module alias to raspberrypi-hwmon Signed-off-by: Olof Johansson <olof@lixom.net> 06 September 2018, 17:00:03 UTC
96d529b Sudeep Holla 06 September 2018, 15:10:39 UTC firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero Firmware can provide zero as values for sustained performance level and corresponding sustained frequency in kHz in order to hide the actual frequencies and provide only abstract values. It may endup with divide by zero scenario resulting in kernel panic. Let's set the multiplication factor to one if either one or both of them (sustained_perf_level and sustained_freq) are set to zero. Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> 06 September 2018, 16:59:40 UTC
db44bf4 Linus Torvalds 06 September 2018, 16:42:14 UTC Merge tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fix from John Johansen: "A fix for an issue syzbot discovered last week: - Fix for bad debug check when converting secids to secctx" * tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix bad debug check in apparmor_secid_to_secctx() 06 September 2018, 16:42:14 UTC
be65e25 Linus Torvalds 06 September 2018, 16:06:49 UTC Merge tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This fixes two annoying bugs: - The first one is a side effect caused by using SRCU for rcuidle tracepoints. It seems that the perf was depending on the rcuidle tracepoints to make RCU watch when it wasn't. The real fix will be to have perf use SRCU instead of depending on RCU watching, but that can't be done until SRCU is safe to use in NMI context (Paul's working on that). - The second bug fix is for a bug that's been periodically making my tests fail randomly for some time. I haven't had time to track it down, but finally have. It has to do with stressing NMIs (via perf) while enabling or disabling ftrace function handling with lockdep enabled. If an interrupt happens and just as it returns, it sets lockdep back to "interrupts enabled" but before it returns an NMI is triggered, and if this happens while printk_nmi_enter has a breakpoint attached to it (because ftrace is converting it to or from nop to call fentry), the breakpoint trap also calls into lockdep, and since returning from the NMI to a interrupt handler, interrupts were disabled when the NMI went off, lockdep keeps its state as interrupts disabled when it returns back from the interrupt handler where interrupts are enabled. This causes lockdep_assert_irqs_enabled() to trigger a false positive" * tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: printk/tracing: Do not trace printk_nmi_enter() tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints 06 September 2018, 16:06:49 UTC
5404525 Linus Torvalds 06 September 2018, 16:04:45 UTC Merge tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix for improper fsync after hardlink - fix for a corruption during file deduplication - use after free fixes - RCU warning fix - fix for buffered write to nodatacow file * tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu btrfs: use after free in btrfs_quota_enable btrfs: btrfs_shrink_device should call commit transaction at the end btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata Btrfs: fix data corruption when deduplicating between different files Btrfs: sync log after logging new name Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space 06 September 2018, 16:04:45 UTC
d1c392c Steven Rostedt (VMware) 05 September 2018, 20:29:49 UTC printk/tracing: Do not trace printk_nmi_enter() I hit the following splat in my tests: ------------[ cut here ]------------ IRQs not enabled as expected WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 EIP: tick_nohz_idle_enter+0x44/0x8c Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00 75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0 e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007 ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296 CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0 Call Trace: do_idle+0x33/0x202 cpu_startup_entry+0x61/0x63 start_secondary+0x18e/0x1ed startup_32_smp+0x164/0x168 irq event stamp: 18773830 hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10 hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10 softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b ---[ end trace b7c64aa79e17954a ]--- After a bit of debugging, I found what was happening. This would trigger when performing "perf" with a high NMI interrupt rate, while enabling and disabling function tracer. Ftrace uses breakpoints to convert the nops at the start of functions to calls to the function trampolines. The breakpoint traps disable interrupts and this makes calls into lockdep via the trace_hardirqs_off_thunk in the entry.S code. What happens is the following: do_idle { [interrupts enabled] <interrupt> [interrupts disabled] TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET test if pt_regs say return to interrupts enabled [yes] TRACE_IRQS_ON [lockdep says irqs are on] <nmi> nmi_enter() { printk_nmi_enter() [traced by ftrace] [ hit ftrace breakpoint ] <breakpoint exception> TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET [return from breakpoint] test if pt_regs say interrupts enabled [no] [iret back to interrupt] [iret back to code] tick_nohz_idle_enter() { lockdep_assert_irqs_enabled() [lockdep say no!] Although interrupts are indeed enabled, lockdep thinks it is not, and since we now do asserts via lockdep, it gives a false warning. The issue here is that printk_nmi_enter() is called before lockdep_off(), which disables lockdep (for this reason) in NMIs. By simply not allowing ftrace to see printk_nmi_enter() (via notrace annotation) we keep lockdep from getting confused. Cc: stable@vger.kernel.org Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI") Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 06 September 2018, 15:24:05 UTC
e92c0ea Ilya Dryomov 22 August 2018, 15:26:10 UTC rbd: support cloning across namespaces If parent_get class method is not supported by the OSDs, fall back to the legacy class method and assume that the parent is in the default (i.e. "") namespace. The "use the child's image namespace" workaround is no longer needed because creating images within namespaces will require parent_get aware OSDs. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> 06 September 2018, 14:18:04 UTC
eb3b2d6 Ilya Dryomov 22 August 2018, 15:11:27 UTC rbd: factor out get_parent_info() In preparation for the new parent_get and parent_overlap_get class methods, factor out the fetching and decoding of parent data. As a side effect, we now decode all four fields in the "no parent" case. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> 06 September 2018, 14:18:04 UTC
8aaff15 Ilya Dryomov 24 August 2018, 13:32:43 UTC ceph: avoid a use-after-free in ceph_destroy_options() syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> 06 September 2018, 14:18:04 UTC
69fa6eb Thomas Gleixner 06 September 2018, 13:21:38 UTC cpu/hotplug: Prevent state corruption on error rollback When a teardown callback fails, the CPU hotplug code brings the CPU back to the previous state. The previous state becomes the new target state. The rollback happens in undo_cpu_down() which increments the state unconditionally even if the state is already the same as the target. As a consequence the next CPU hotplug operation will start at the wrong state. This is easily to observe when __cpu_disable() fails. Prevent the unconditional undo by checking the state vs. target before incrementing state and fix up the consequently wrong conditional in the unplug code which handles the failure of the final CPU take down on the control CPU side. Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core") Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: josh@joshtriplett.org Cc: peterz@infradead.org Cc: jiangshanlai@gmail.com Cc: dzickus@redhat.com Cc: brendan.jackman@arm.com Cc: malat@debian.org Cc: sramana@codeaurora.org Cc: linux-arm-msm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1809051419580.1416@nanos.tec.linutronix.de ---- 06 September 2018, 13:21:38 UTC
f8b7530 Neeraj Upadhyay 05 September 2018, 05:52:07 UTC cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun() The smp_mb() in cpuhp_thread_fun() is misplaced. It needs to be after the load of st->should_run to prevent reordering of the later load/stores w.r.t. the load of st->should_run. Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core") Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org> Cc: josh@joshtriplett.org Cc: peterz@infradead.org Cc: jiangshanlai@gmail.com Cc: dzickus@redhat.com Cc: brendan.jackman@arm.com Cc: malat@debian.org Cc: mojha@codeaurora.org Cc: sramana@codeaurora.org Cc: linux-arm-msm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1536126727-11629-1-git-send-email-neeraju@codeaurora.org 06 September 2018, 13:21:37 UTC
9fe6299 Jann Horn 31 August 2018, 19:41:51 UTC x86/process: Don't mix user/kernel regs in 64bit __show_regs() When the kernel.print-fatal-signals sysctl has been enabled, a simple userspace crash will cause the kernel to write a crash dump that contains, among other things, the kernel gsbase into dmesg. As suggested by Andy, limit output to pt_regs, FS_BASE and KERNEL_GS_BASE in this case. This also moves the bitness-specific logic from show_regs() into process_{32,64}.c. Fixes: 45807a1df9f5 ("vdso: print fatal signals") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180831194151.123586-1-jannh@google.com 06 September 2018, 12:33:12 UTC
17f6bac Chuanhua Lei 06 September 2018, 10:03:23 UTC x86/tsc: Prevent result truncation on 32bit Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then dividing it by HZ. Both tsc_khz and the temporary variable holding the multiplication result are of type unsigned long, so on 32bit the result is truncated to the lower 32bit. Use u64 as type for the temporary variable and cast tsc_khz to it before multiplying. [ tglx: Massaged changelog and removed pointless braces ] Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once") Signed-off-by: Chuanhua Lei <chuanhua.lei@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: yixin.zhu@linux.intel.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Tatashin <pasha.tatashin@microsoft.com> Cc: Rajvi Jingar <rajvi.jingar@intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@linux.intel.com 06 September 2018, 12:22:01 UTC
f11fc4b Zhang Rui 03 September 2018, 02:00:07 UTC ACPI / LPSS: Force LPSS quirks on boot Commit 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation) bypasses lpss quirks for S3 and S4, by setting a flag for S3/S4 in acpi_lpss_suspend(), and check that flag in acpi_lpss_resume(). But this overlooks the boot case where acpi_lpss_resume() may get called without a corresponding acpi_lpss_suspend() having been called. Thus force setting the flag during boot. Fixes: 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation) Link: https://bugzilla.kernel.org/show_bug.cgi?id=200989 Reported-and-tested-by: William Lieurance <william.lieurance@namikoda.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+: 12864ff8545f (ACPI / LPSS: Avoid ...) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 06 September 2018, 10:23:25 UTC
5d128fb Jean Delvare 04 September 2018, 12:55:26 UTC ACPI / bus: Only call dmi_check_system() on X86 Calling dmi_check_system() early only works on X86. Other architectures initialize the DMI subsystem later so it's not ready yet when ACPI itself gets initialized. In the best case it results in a useless call to a function which will do nothing. But depending on the dmi implementation, it could also result in warnings. Best is to not call the function when it can't work and isn't needed. Additionally, if anyone ever needs to add non-x86 quirks, it would surprisingly not work, so document the limitation to avoid confusion. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: cce4f632db20 (ACPI: fix early DSDT dmi check warnings on ia64) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 06 September 2018, 10:16:29 UTC
8b2ded1 Mikulas Patocka 05 September 2018, 22:14:36 UTC block: don't warn when doing fsync on read-only devices It is possible to call fsync on a read-only handle (for example, fsck.ext2 does it when doing read-only check), and this call results in kernel warning. The patch b089cfd95d32 ("block: don't warn for flush on read-only device") attempted to disable the warning, but it is buggy and it doesn't (op_is_flush tests flags, but bio_op strips off the flags). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 September 2018, 22:14:36 UTC
d07f05f Peter Robinson 20 July 2018, 23:02:12 UTC hwmon: rpi: add module alias to raspberrypi-hwmon The raspberrypi-hwmon driver doesn't automatically load, although it does work when loaded, by adding the alias it auto loads as expected when built as a module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with Fedora 28 and a patched 4.18 RC kernel. Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Stefan Wahren <stefan.wahren@i2se.com> CC: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 05 September 2018, 18:58:00 UTC
b36fdc6 Linus Torvalds 05 September 2018, 16:27:45 UTC Merge tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes. The ACPI stuff is probably the most annoying for users that get fixed this time. - Atomic contexts, cansleep* calls and such fastpath/slopwpath things. - Defer ACPI event handler registration to late_initcall() so IRQs do not fire in our face before other drivers have a chance to register handlers. - Race condition if a consumer requests a GPIO after gpiochip_add_data_with_key() but before of_gpiochip_add() - Probe errorpath in the dwapb driver" * tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Fix crash due to registration race gpio: dwapb: Fix error handling in dwapb_gpio_probe() gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall gpiolib: acpi: Switch to cansleep version of GPIO library call gpio: adp5588: Fix sleep-in-atomic-context bug 05 September 2018, 16:27:45 UTC
f4697d9 Linus Torvalds 05 September 2018, 16:17:20 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of very minor fixes and a couple of reverts to fix a major problem (the attempt to change the busy count causes a hang when attempting to change the drive cache type)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aacraid: fix a signedness bug Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq" Revert "scsi: core: fix scsi_host_queue_ready" scsi: libata: Add missing newline at end of file scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info() scsi: hpsa: limit transfer length to 1MB, not 512kB scsi: lpfc: Correct MDS diag and nvmet configuration scsi: lpfc: Default fdmi_on to on scsi: csiostor: fix incorrect port capabilities scsi: csiostor: add a check for NULL pointer after kmalloc() scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters scsi: core: Update SCSI_MQ_DEFAULT help text to match default 05 September 2018, 16:17:20 UTC
d0c1db1 Linus Torvalds 05 September 2018, 16:13:31 UTC Merge tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: "Contained in here are the bug fixes, building error fixes and ftrace support for nds32" * tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: linker script: GCOV kernel may refers data in __exit nds32: fix build error because of wrong semicolon nds32: Fix a kernel panic issue because of wrong frame pointer access. nds32: Only print one page of stack when die to prevent printing too much information. nds32: Add macro definition for offset of lp register on stack nds32: Remove the deprecated ABI implementation nds32/stack: Get real return address by using ftrace_graph_ret_addr nds32/ftrace: Support dynamic function graph tracer nds32/ftrace: Support dynamic function tracer nds32/ftrace: Add RECORD_MCOUNT support nds32/ftrace: Support static function graph tracer nds32/ftrace: Support static function tracer nds32: Extract the checking and getting pointer to a macro nds32: Clean up the coding style nds32: Fix get_user/put_user macro expand pointer problem nds32: Fix empty call trace nds32: add NULL entry to the end of_device_id array nds32: fix logic for module 05 September 2018, 16:13:31 UTC
865e63b Steven Rostedt (VMware) 04 September 2018, 20:26:11 UTC tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints Borislav reported the following splat: ============================= WARNING: suspicious RCU usage 4.19.0-rc1+ #1 Not tainted ----------------------------- ./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 2, debug_locks = 1 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1 Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012 Call Trace: dump_stack+0x85/0xcb perf_event_output_forward+0xf6/0x130 __perf_event_overflow+0x52/0xe0 perf_swevent_overflow+0x91/0xb0 perf_tp_event+0x11a/0x350 ? find_held_lock+0x2d/0x90 ? __lock_acquire+0x2ce/0x1350 ? __lock_acquire+0x2ce/0x1350 ? retint_kernel+0x2d/0x2d ? find_held_lock+0x2d/0x90 ? tick_nohz_get_sleep_length+0x83/0xb0 ? perf_trace_cpu+0xbb/0xd0 ? perf_trace_buf_alloc+0x5a/0xa0 perf_trace_cpu+0xbb/0xd0 cpuidle_enter_state+0x185/0x340 do_idle+0x1eb/0x260 cpu_startup_entry+0x5f/0x70 start_kernel+0x49b/0x4a6 secondary_startup_64+0xa4/0xb0 This is due to the tracepoints moving to SRCU usage which does not require RCU to be "watching". But perf uses these tracepoints with RCU and expects it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson() calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU working in NMI context, and then perf can be converted to use that instead of normal RCU. Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home Cc: x86-ml <x86@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov <bp@alien8.de> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 September 2018, 15:23:21 UTC
3350139 Greentime Hu 04 September 2018, 06:25:57 UTC nds32: linker script: GCOV kernel may refers data in __exit This patch is used to fix nds32 allmodconfig/allyesconfig build error because GCOV kernel embeds counters in the kernel for each line and a part of that embed in __exit text. So we need to keep the EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y. Link: https://lkml.org/lkml/2018/9/1/125 Signed-off-by: Greentime Hu <greentime@andestech.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> 05 September 2018, 02:16:26 UTC
0e9b103 Linus Torvalds 05 September 2018, 00:01:11 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: nilfs2: convert to SPDX license tags drivers/dax/device.c: convert variable to vm_fault_t type lib/Kconfig.debug: fix three typos in help text checkpatch: add __ro_after_init to known $Attribute mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name memory_hotplug: fix kernel_panic on offline page processing checkpatch: add optional static const to blank line declarations test ipc/shm: properly return EIDRM in shm_lock() mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported. mm/util.c: improve kvfree() kerneldoc tools/vm/page-types.c: fix "defined but not used" warning tools/vm/slabinfo.c: fix sign-compare warning kmemleak: always register debugfs file mm: respect arch_dup_mmap() return value mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm(). mm: memcontrol: print proper OOM header when no eligible victim left 05 September 2018, 00:01:11 UTC
ae98043 Ryusuke Konishi 04 September 2018, 22:46:30 UTC nilfs2: convert to SPDX license tags Remove the verbose license text from NILFS2 files and replace them with SPDX tags. This does not change the license of any of the code. Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
36bdac1 Souptick Joarder 04 September 2018, 22:46:26 UTC drivers/dax/device.c: convert variable to vm_fault_t type As part of 226ab561075f ("device-dax: Convert to vmf_insert_mixed and vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now converted. Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
4c5d114 Thibaut Sautereau 04 September 2018, 22:46:23 UTC lib/Kconfig.debug: fix three typos in help text Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text. Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.fr Signed-off-by: Thibaut Sautereau <thibaut@sautereau.fr> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
c5967e9 Joe Perches 04 September 2018, 22:46:20 UTC checkpatch: add __ro_after_init to known $Attribute __ro_after_init is a specific __attribute__ that checkpatch does currently not understand. Add it to the known $Attribute types so that code that uses variables declared with __ro_after_init are not thought to be a modifier type. This appears as a defect in checkpatch output of code like: static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU); [...] if (trust_cpu && arch_init) { where checkpatch reports: ERROR: space prohibited after that '&&' (ctx:WxW) if (trust_cpu && arch_init) { Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
62ec0d8 Dave Jiang 04 September 2018, 22:46:16 UTC mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal It looks like I missed the PUD path when doing VM_MIXEDMAP removal. This can be triggered by: 1. Boot with memmap=4G!8G 2. build ndctl with destructive flag on 3. make TESTS=device-dax check [ +0.000675] kernel BUG at mm/huge_memory.c:824! Applying the same change that was applied to vmf_insert_pfn_pmd() in the original patch. Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com Fixes: e1fb4a08649 ("dax: remove VM_MIXEDMAP for fsdax and device dax") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
8a2336e Randy Dunlap 04 September 2018, 22:46:13 UTC uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name Since this header is in "include/uapi/linux/", apparently people want to use it in userspace programs -- even in C++ ones. However, the header uses a C++ reserved keyword ("private"), so change that to "dh_private" instead to allow the header file to be used in C++ userspace. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051 Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
4e8346d Mikhail Zaslonko 04 September 2018, 22:46:09 UTC memory_hotplug: fix kernel_panic on offline page processing Within show_valid_zones() the function test_pages_in_a_zone() should be called for online memory blocks only. Otherwise it might lead to the VM_BUG_ON due to uninitialized struct pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set): page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) ------------[ cut here ]------------ Call Trace: ([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168) [<0000000000923472>] show_valid_zones+0x5a/0x1a8 [<0000000000900284>] dev_attr_show+0x3c/0x78 [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150 [<00000000003ef662>] seq_read+0x212/0x4b8 [<00000000003bf202>] __vfs_read+0x3a/0x178 [<00000000003bf3ca>] vfs_read+0x8a/0x148 [<00000000003bfa3a>] ksys_read+0x62/0xb8 [<0000000000bc2220>] system_call+0xdc/0x2d8 That VM_BUG_ON was triggered by the page poisoning introduced in mm/sparse.c with the git commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug"). With the same commit the new 'nid' field has been added to the struct memory_block in order to store and later on derive the node id for offline pages (instead of accessing struct page which might be uninitialized). But one reference to nid in show_valid_zones() function has been overlooked. Fixed with current commit. Also, nr_pages will not be used any more after test_pages_in_a_zone() call, do not update it. Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug") Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
328b5f4 Joe Perches 04 September 2018, 22:46:06 UTC checkpatch: add optional static const to blank line declarations test Using a static const struct definition as part of a series of declarations produces a false positive "Missing a blank line after declarations" for code like: WARNING: Missing a blank line after declarations #710: FILE: drivers/gpu/drm/tidss/tidss_scale_coefs.c:137: + int inc; + static const struct { So fix it. Link: http://lkml.kernel.org/r/5905126e70b0ed1781e49265fd5c49c5090d0223.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Jyri Sarha <jsarha@ti.com> Cc: "Valkeinen, Tomi" <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
9c21dae Davidlohr Bueso 04 September 2018, 22:46:02 UTC ipc/shm: properly return EIDRM in shm_lock() When getting rid of the general ipc_lock(), this was missed furthermore, making the comment around the ipc object validity check bogus. Under EIDRM conditions, callers will in turn not see the error and continue with the operation. Link: http://lkml.kernel.org/r/20180824030920.GD3677@linux-r8p5 Link: http://lkml.kernel.org/r/20180823024051.GC13343@shao2-debian Fixes: 82061c57ce9 ("ipc: drop ipc_lock()") Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
464c7ff Aneesh Kumar K.V 04 September 2018, 22:45:59 UTC mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported. When scanning for movable pages, filter out Hugetlb pages if hugepage migration is not supported. Without this we hit infinte loop in __offline_pages() where we do pfn = scan_movable_pages(start_pfn, end_pfn); if (pfn) { /* We have movable pages */ ret = do_migrate_range(pfn, end_pfn); goto repeat; } Fix this by checking hugepage_migration_supported both in has_unmovable_pages which is the primary backoff mechanism for page offlining and for consistency reasons also into scan_movable_pages because it doesn't make any sense to return a pfn to non-migrateable huge page. This issue was revealed by, but not caused by 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early"). Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com Fixes: 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Haren Myneni <haren@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
04b8e94 Andrew Morton 04 September 2018, 22:45:55 UTC mm/util.c: improve kvfree() kerneldoc Scooped from an email from Matthew. Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
7ab660f Naoya Horiguchi 04 September 2018, 22:45:51 UTC tools/vm/page-types.c: fix "defined but not used" warning debugfs_known_mountpoints[] is not used any more, so let's remove it. Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
9045065 Naoya Horiguchi 04 September 2018, 22:45:48 UTC tools/vm/slabinfo.c: fix sign-compare warning Currently we get the following compiler warning: slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (s->object_size < min_objsize) ^ due to the mismatch of signed/unsigned comparison. ->object_size and ->slab_size are never expected to be negative, so let's define them as unsigned int. [n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative] Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
b353756 Vincent Whitchurch 04 September 2018, 22:45:44 UTC kmemleak: always register debugfs file If kmemleak built in to the kernel, but is disabled by default, the debugfs file is never registered. Because of this, it is not possible to find out if the kernel is built with kmemleak support by checking for the presence of this file. To allow this, always register the file. After this patch, if the file doesn't exist, kmemleak is not available in the kernel. If writing "scan" or any other value than "clear" to this file results in EBUSY, then kmemleak is available but is disabled by default and can be activated via the kernel command line. Catalin: "that's also consistent with a late disabling of kmemleak when the debugfs entry sticks around." Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
1ed0cc5 Nadav Amit 04 September 2018, 22:45:41 UTC mm: respect arch_dup_mmap() return value Commit d70f2a14b72a ("include/linux/sched/mm.h: uninline mmdrop_async(), etc") ignored the return value of arch_dup_mmap(). As a result, on x86, a failure to duplicate the LDT (e.g. due to memory allocation error) would leave the duplicated memory mapping in an inconsistent state. Fix by using the return value, as it was before the change. Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com Fixes: d70f2a14b72a4 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc") Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
79cc810 Tetsuo Handa 04 September 2018, 22:45:37 UTC mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm(). Commit 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") has added an ability to skip over vmas with blockable mmu notifiers. This however didn't call tlb_finish_mmu as it should. As a result inc_tlb_flush_pending has been called without its pairing dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush even though this is not really needed. This alone is not harmful and it seems there shouldn't be any such callers for oom victims at all but there is no real reason to skip tlb_finish_mmu on early skip either so call it. [mhocko@suse.com: new changelog] Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
3100dab Johannes Weiner 04 September 2018, 22:45:34 UTC mm: memcontrol: print proper OOM header when no eligible victim left When the memcg OOM killer runs out of killable tasks, it currently prints a WARN with no further OOM context. This has caused some user confusion. Warnings indicate a kernel problem. In a reported case, however, the situation was triggered by a nonsensical memcg configuration (hard limit set to 0). But without any VM context this wasn't obvious from the report, and it took some back and forth on the mailing list to identify what is actually a trivial issue. Handle this OOM condition like we handle it in the global OOM killer: dump the full OOM context and tell the user we ran out of tasks. This way the user can identify misconfigurations easily by themselves and rectify the problem - without having to go through the hassle of running into an obscure but unsettling warning, finding the appropriate kernel mailing list and waiting for a kernel developer to remote-analyze that the memcg configuration caused this. If users cannot make sense of why the OOM killer was triggered or why it failed, they will still report it to the mailing list, we know that from experience. So in case there is an actual kernel bug causing this, kernel developers will very likely hear about it. Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2018, 23:45:02 UTC
dd45210 Eugeniy Paltsev 30 July 2018, 16:26:36 UTC ARC: don't check for HIGHMEM pages in arch_dma_alloc __GFP_HIGHMEM flag is cleared by upper layer functions (in include/linux/dma-mapping.h) so we'll never get a __GFP_HIGHMEM flag in arch_dma_alloc gfp argument. That's why alloc_pages will never return highmem page here. Get rid of highmem pages handling and cleanup arch_dma_alloc and arch_dma_free functions. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 04 September 2018, 20:21:38 UTC
2b720e9 Eugeniy Paltsev 30 July 2018, 16:26:35 UTC ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 04 September 2018, 20:21:37 UTC
2820a70 Eugeniy Paltsev 30 July 2018, 16:26:34 UTC ARC: dma [IOC] Enable per device io coherency So far the IOC treatment was global on ARC, being turned on (or off) for all devices in the system. With this patch, this can now be done per device using the "dma-coherent" DT property; IOW with this patch we can use both HW-coherent and regular DMA peripherals simultaneously. The changes involved are too many so enlisting the summary below: 1. common code calls ARC arch_setup_dma_ops() per device. 2. For coherent dma (IOC) it plugs in generic @dma_direct_ops which doesn't need any arch specific backend: No need for any explicit cache flushes or MMU mappings to provide for uncached access - dma_(map|sync)_single* return early as corresponding dma ops callbacks are NULL in generic code. So arch_sync_dma_*() -> dma_cache_*() need not handle the coherent dma case, hence drop ARC __dma_cache_*_ioc() which were no-op anyways 3. For noncoherent dma (non IOC) generic @dma_noncoherent_ops is used which in turns calls ARC specific routines - arch_dma_alloc() no longer checks for @ioc_enable since this is called only for !IOC case. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog] 04 September 2018, 20:21:37 UTC
2861952 Linus Torvalds 04 September 2018, 19:45:11 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Must perform TXQ teardown before unregistering interfaces in mac80211, from Toke Høiland-Jørgensen. 2) Don't allow creating mac80211_hwsim with less than one channel, from Johannes Berg. 3) Division by zero in cfg80211, fix from Johannes Berg. 4) Fix endian issue in tipc, from Haiqing Bai. 5) BPF sockmap use-after-free fixes from Daniel Borkmann. 6) Spectre-v1 in mac80211_hwsim, from Jinbum Park. 7) Missing rhashtable_walk_exit() in tipc, from Cong Wang. 8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when kvzalloc() tries to use kmalloc() pages. From Eric Dumazet. 9) Fix deadlock in hv_netvsc, from Dexuan Cui. 10) Do not restart timewait timer on RST, from Florian Westphal. 11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev. 12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu. 13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai. 14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu. 15) Use-after-free in act_ife, fix from Cong Wang. 16) Missing hold to meta module in act_ife, from Vlad Buslov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) net: phy: sfp: Handle unimplemented hwmon limits and alarms net: sched: action_ife: take reference to meta module act_ife: fix a potential use-after-free net/mlx5: Fix SQ offset in QPs with small RQ tipc: correct spelling errors for tipc_topsrv_queue_evt() comments tipc: correct spelling errors for struct tipc_bc_base's comment bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA. bnxt_en: Clean up unused functions. bnxt_en: Fix firmware signaled resource change logic in open. sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel sctp: fix invalid reference to the index variable of the iterator net/ibm/emac: wrong emac_calc_base call was used by typo net: sched: null actions array pointer before releasing action vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition r8169: add support for NCube 8168 network card ip6_tunnel: respect ttl inherit for ip6tnl mac80211: shorten the IBSS debug messages mac80211: don't Tx a deauth frame if the AP forbade Tx mac80211: Fix station bandwidth setting after channel switch mac80211: fix a race between restart and CSA flows ... 04 September 2018, 19:45:11 UTC
a33710b Andrew Lunn 04 September 2018, 02:23:56 UTC net: phy: sfp: Handle unimplemented hwmon limits and alarms Not all SFPs implement the registers containing sensor limits and alarms. Luckily, there is a bit indicating if they are implemented or not. Add checking for this bit, when deciding if the hwmon attributes should be visible. Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 04 September 2018, 19:22:41 UTC
84cb8eb Vlad Buslov 03 September 2018, 21:44:42 UTC net: sched: action_ife: take reference to meta module Recent refactoring of add_metainfo() caused use_all_metadata() to add metainfo to ife action metalist without taking reference to module. This causes warning in module_put called from ife action cleanup function. Implement add_metainfo_and_get_ops() function that returns with reference to module taken if metainfo was added successfully, and call it from use_all_metadata(), instead of calling __add_metainfo() directly. Example warning: [ 646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230 [ 646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas [ 646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799 [ 646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 646.440595] RIP: 0010:module_put+0x1cb/0x230 [ 646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b [ 646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286 [ 646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db [ 646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518 [ 646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3 [ 646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d [ 646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100 [ 646.508213] FS: 00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000 [ 646.516961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0 [ 646.530595] Call Trace: [ 646.533408] ? find_symbol_in_section+0x260/0x260 [ 646.538509] tcf_ife_cleanup+0x11b/0x200 [act_ife] [ 646.543695] tcf_action_cleanup+0x29/0xa0 [ 646.548078] __tcf_action_put+0x5a/0xb0 [ 646.552289] ? nla_put+0x65/0xe0 [ 646.555889] __tcf_idr_release+0x48/0x60 [ 646.560187] tcf_generic_walker+0x448/0x6b0 [ 646.564764] ? tcf_action_dump_1+0x450/0x450 [ 646.569411] ? __lock_is_held+0x84/0x110 [ 646.573720] ? tcf_ife_walker+0x10c/0x20f [act_ife] [ 646.578982] tca_action_gd+0x972/0xc40 [ 646.583129] ? tca_get_fill.constprop.17+0x250/0x250 [ 646.588471] ? mark_lock+0xcf/0x980 [ 646.592324] ? check_chain_key+0x140/0x1f0 [ 646.596832] ? debug_show_all_locks+0x240/0x240 [ 646.601839] ? memset+0x1f/0x40 [ 646.605350] ? nla_parse+0xca/0x1a0 [ 646.609217] tc_ctl_action+0x215/0x230 [ 646.613339] ? tcf_action_add+0x220/0x220 [ 646.617748] rtnetlink_rcv_msg+0x56a/0x6d0 [ 646.622227] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.626466] netlink_rcv_skb+0x18d/0x200 [ 646.630752] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.634959] ? netlink_ack+0x500/0x500 [ 646.639106] netlink_unicast+0x2d0/0x370 [ 646.643409] ? netlink_attachskb+0x340/0x340 [ 646.648050] ? _copy_from_iter_full+0xe9/0x3e0 [ 646.652870] ? import_iovec+0x11e/0x1c0 [ 646.657083] netlink_sendmsg+0x3b9/0x6a0 [ 646.661388] ? netlink_unicast+0x370/0x370 [ 646.665877] ? netlink_unicast+0x370/0x370 [ 646.670351] sock_sendmsg+0x6b/0x80 [ 646.674212] ___sys_sendmsg+0x4a1/0x520 [ 646.678443] ? copy_msghdr_from_user+0x210/0x210 [ 646.683463] ? lock_downgrade+0x320/0x320 [ 646.687849] ? debug_show_all_locks+0x240/0x240 [ 646.692760] ? do_raw_spin_unlock+0xa2/0x130 [ 646.697418] ? _raw_spin_unlock+0x24/0x30 [ 646.701798] ? __handle_mm_fault+0x1819/0x1c10 [ 646.706619] ? __pmd_alloc+0x320/0x320 [ 646.710738] ? debug_show_all_locks+0x240/0x240 [ 646.715649] ? restore_nameidata+0x7b/0xa0 [ 646.720117] ? check_chain_key+0x140/0x1f0 [ 646.724590] ? check_chain_key+0x140/0x1f0 [ 646.729070] ? __fget_light+0xbc/0xd0 [ 646.733121] ? __sys_sendmsg+0xd7/0x150 [ 646.737329] __sys_sendmsg+0xd7/0x150 [ 646.741359] ? __ia32_sys_shutdown+0x30/0x30 [ 646.746003] ? up_read+0x53/0x90 [ 646.749601] ? __do_page_fault+0x484/0x780 [ 646.754105] ? do_syscall_64+0x1e/0x2c0 [ 646.758320] do_syscall_64+0x72/0x2c0 [ 646.762353] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 646.767776] RIP: 0033:0x7f4163872150 [ 646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150 [ 646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003 [ 646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000 [ 646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20 [ 646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0 [ 646.837360] irq event stamp: 6083 [ 646.841043] hardirqs last enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500 [ 646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c [ 646.859775] softirqs last enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee [ 646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife] [ 646.878845] ---[ end trace b1b8c12ffe51e657 ]--- Fixes: 5ffe57da29b3 ("act_ife: fix a potential deadlock") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 September 2018, 19:20:21 UTC
6d784f1 Cong Wang 03 September 2018, 18:08:15 UTC act_ife: fix a potential use-after-free Immediately after module_put(), user could delete this module, so e->ops could be already freed before we call e->ops->release(). Fix this by moving module_put() after ops->release(). Fixes: ef6980b6becb ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 September 2018, 19:18:25 UTC
639505d Tariq Toukan 03 September 2018, 15:06:24 UTC net/mlx5: Fix SQ offset in QPs with small RQ Correct the formula for calculating the RQ page remainder, which should be in byte granularity. The result will be non-zero only for RQs smaller than PAGE_SIZE, as an RQ size is a power of 2. Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the SQ offset in strides granularity. Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 September 2018, 19:17:33 UTC
732b531 Radim Krčmář 04 September 2018, 19:12:46 UTC Merge tag 'kvm-ppc-fixes-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc PPC KVM fixes for 4.19 Two small fixes for KVM on POWER machines; one fixes a bug where pages might not get marked dirty, causing guest memory corruption on migration, and the other fixes a bug causing reads from guest memory to use the wrong guest real address for very large HPT guests (>256G of memory), leading to failures in instruction emulation. 04 September 2018, 19:12:46 UTC
bc811f0 Jens Axboe 04 September 2018, 17:52:34 UTC nbd: don't allow invalid blocksize settings syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl. We need proper validation of the input here. Not just if it's zero, but also if the value is a power-of-2 and in a valid range. Add that. Cc: stable@vger.kernel.org Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 04 September 2018, 17:54:58 UTC
851a151 Felipe Balbi 03 September 2018, 08:24:57 UTC i2c: i801: fix DNV's SMBCTRL register offset DNV's iTCO is slightly different with SMBCTRL sitting at a different offset when compared to all other devices. Let's fix so that we can properly use iTCO watchdog. Fixes: 84d7f2ebd70d ("i2c: i801: Add support for Intel DNV") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 04 September 2018, 16:04:55 UTC
df88f31 Janosch Frank 30 August 2018, 14:14:18 UTC KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting We have to do down_write on the mm semaphore to set a bitfield in the mm context. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Fixes: a4499382 ("KVM: s390: Add huge page enablement control") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> 04 September 2018, 09:40:26 UTC
204c972 Pierre Morel 23 August 2018, 10:25:54 UTC KVM: s390: vsie: copy wrapping keys to right place Copy the key mask to the right offset inside the shadow CRYCB Fixes: bbeaa58b3 ("KVM: s390: vsie: support aes dea wrapping keys") Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Cc: stable@vger.kernel.org # v4.8+ Message-Id: <1535019956-23539-2-git-send-email-pmorel@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> 04 September 2018, 09:26:11 UTC
a11bdb1 Janosch Frank 30 August 2018, 08:13:55 UTC KVM: s390: Fix pfmf and conditional skey emulation We should not return with a lock. We also have to increase the address when we do page clearing. Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20180830081355.59234-1-frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> 04 September 2018, 09:24:43 UTC
ec86539 Greentime Hu 28 August 2018, 08:07:39 UTC nds32: fix build error because of wrong semicolon It shall be removed in the define usage. We shall not put a semicolon there. /kisskb/src/arch/nds32/include/asm/elf.h:126:29: error: expected '}' before ';' token #define ELF_DATA ELFDATA2LSB; ^ /kisskb/src/fs/proc/kcore.c:318:17: note: in expansion of macro 'ELF_DATA' [EI_DATA] = ELF_DATA, ^~~~~~~~ /kisskb/src/fs/proc/kcore.c:312:15: note: to match this '{' .e_ident = { ^ /kisskb/src/scripts/Makefile.build:307: recipe for target 'fs/proc/kcore.o' failed Signed-off-by: Greentime Hu <greentime@andestech.com> 04 September 2018, 06:45:20 UTC
0cde56e Greentime Hu 23 August 2018, 07:05:46 UTC nds32: Fix a kernel panic issue because of wrong frame pointer access. It can make sure that trace_hardirqs_off/trace_hardirqs_on can get a correct return address by frame pointer through __builtin_return_address() in this fix. Unable to handle kernel paging request at virtual address fffffffc pgd = 3c42e9cf [fffffffc] *pgd=02a9c000 Internal error: Oops: 1 [#1] Modules linked in: CPU: 0 PC is at trace_hardirqs_off+0x78/0xec LP is at common_exception_handler+0xda/0xf4 pc : [<b23ea5a4>] lp : [<b2352eba>] Tainted: G W sp : ada60ab0 fp : efcaff48 gp : 3a020490 r25: efcb0000 r24: 00000000 r23: 00000000 r22: 00000000 r21: 00000000 r20: 000700c1 r19: 000700ca r18: 3a21b018 r17: 00000001 r16: 00000002 r15: 00000001 r14: 0000002a r13: 3a00a804 r12: ada60ab0 r11: 3a113af8 r10: 3a01c530 r9 : 3a124404 r8 : 00120f9c r7 : b2352eba r6 : 00000000 r5 : 3a126b58 r4 : 00000000 r3 : 3a1726a8 r2 : b2921000 r1 : 00000000 r0 : 00000000 IRQs off Segment user Process init (pid: 1, stack limit = 0x069d7f15) Stack: (0xada60ab0 to 0xada61000) Stack: 0aa0: 00000000 00000003 3a110000 0011f000 Stack: 0ac0: 00000005 00000000 00000000 00000000 ada60b10 3a01fe68 ada60b0c ada60b08 Stack: 0ae0: 00000000 ada60ab8 ada60b30 3a020550 00000000 00000001 3a11c2f8 3a01c6e8 Stack: 0b00: 3a01cb80 fffffba8 3a113af8 3a21b018 3a122c28 00003ec4 00000165 00000000 Stack: 0b20: 3a126aec 0000006c 00000000 00000001 3a01fe68 00000000 00000003 00000000 Stack: 0b40: 00000001 000003f8 3a020930 3a01c530 00000008 ada60c18 3a020490 3a003120 Stack: 0b60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0b80: 00000000 00000000 00000000 00000000 ffff8000 00000000 00000000 00000000 Stack: 0ba0: 00000000 00000001 3a020550 00000000 3a01d020 00000000 fffff000 fffff000 Stack: 0bc0: 00000000 00000000 00000000 00000000 ada60f2c 00000000 00000001 00000000 Stack: 0be0: 00000000 00000000 3a01fe68 fffffab0 00008034 00000008 3a0010cc 3a01fe68 Stack: 0c00: 00000000 00000000 00000001 ada60c88 3a020490 3a0139d4 0009dc6f 00000000 Stack: 0c20: 00000000 00000000 ada60fce fffff000 00000000 0000ebe0 3a020038 3a020550 Stack: 0c40: ada60f20 ada60c90 3a0007f0 3a0002a8 ada60c8c 00000000 00000000 ada60c88 Stack: 0c60: 3a020490 3a004570 00000000 00000000 ada60f20 3a0007f0 3a000000 00000000 Stack: 0c80: 3a020490 3a004850 00000000 3a013f24 3a000000 00000000 3a01ff44 00000000 Stack: 0ca0: 00000000 00000000 00000000 00000000 00000000 00000000 3a01ff84 3a01ff7c Stack: 0cc0: 3a01ff4c 3a01ff5c 3a01ff64 3a01ff9c 3a01ffa4 3a01ffac 3a01ff6c 3a01ff74 Stack: 0ce0: 00000000 00000000 3a01ff44 00000000 00000000 00000000 00000000 00000000 Stack: 0d00: 3a01ff8c 00000000 00000000 3a01ff94 00000000 00000000 00000000 00000000 Stack: 0d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0d40: 3a01ffbc 3a01ffb4 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0d60: 00000000 00000000 00000000 00000000 00000000 3a01ffc4 00000000 00000000 Stack: 0d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0dc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3a01ff54 Stack: 0de0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e20: 00000000 00000004 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0e80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Stack: 0ec0: 00000000 00000000 00000000 00000000 ffffffff 00000000 00000000 00000000 Stack: 0ee0: 00000000 00000000 00000000 00000000 ada60f20 00000000 00000000 00000000 Stack: 0f00: 00000000 00000000 00000000 00000000 00000000 00000000 3a020490 3a000b24 Stack: 0f20: 00000001 ada60fde 00000000 ada60fe4 ada60feb 00000000 00000021 3a038000 Stack: 0f40: 00000010 0009dc6f 00000006 00001000 00000011 00000064 00000003 00008034 Stack: 0f60: 00000004 00000020 00000005 00000008 00000007 3a000000 00000008 00000000 Stack: 0f80: 00000009 0000ebe0 0000000b 00000000 0000000c 00000000 0000000d 00000000 Stack: 0fa0: 0000000e 00000000 00000017 00000000 00000019 ada60fce 0000001f ada60ff6 Stack: 0fc0: 00000000 00000000 00000000 b5010000 fa839914 23b5dd89 a2aea540 692fc82e Stack: 0fe0: 0074696e 454d4f48 54002f3d 3d4d5245 756e696c 692f0078 0074696e 00000000 CPU: 0 PID: 1 Comm: init Tainted: G W 4.18.0-00015-g1888b64a2558-dirty #112 Hardware name: andestech,ae3xx (DT) Call Trace: [<b27a8e34>] dump_stack+0x2c/0x38 [<b2354874>] die+0x128/0x18c [<b2356f4c>] do_page_fault+0x3b8/0x4e0 [<b2352ed4>] ret_from_exception+0x0/0x10 [<b2352eba>] common_exception_handler+0xda/0xf4 Signed-off-by: Greentime Hu <greentime@andestech.com> 04 September 2018, 06:45:19 UTC
back to top