Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
cbfe8fa Linus Torvalds 26 July 2015, 19:26:21 UTC Linux 4.2-rc4 26 July 2015, 19:26:21 UTC
2579d01 Linus Torvalds 26 July 2015, 18:46:32 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix for the intel cqm perf facility to prevent IPIs from interrupt context" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/cqm: Return cached counter value from IRQ context 26 July 2015, 18:46:32 UTC
2800348 Linus Torvalds 26 July 2015, 18:14:04 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "This update contains: - the manual revert of the SYSCALL32 changes which caused a regression - a fix for the MPX vma handling - three fixes for the ioremap 'is ram' checks. - PAT warning fixes - a trivial fix for the size calculation of TLB tracepoints - handle old EFI structures gracefully This also contains a PAT fix from Jan plus a revert thereof. Toshi explained why the code is correct" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pat: Revert 'Adjust default caching mode translation tables' x86/asm/entry/32: Revert 'Do not use R9 in SYSCALL32' commit x86/mm: Fix newly introduced printk format warnings mm: Fix bugs in region_is_ram() x86/mm: Remove region_is_ram() call from ioremap x86/mm: Move warning from __ioremap_check_ram() to the call site x86/mm/pat, drivers/media/ivtv: Move the PAT warning and replace WARN() with pr_warn() x86/mm/pat, drivers/infiniband/ipath: Replace WARN() with pr_warn() x86/mm/pat: Adjust default caching mode translation tables x86/fpu: Disable dependent CPU features on "noxsave" x86/mpx: Do not set ->vm_ops on MPX VMAs x86/mm: Add parenthesis for TLB tracepoint size calculation efi: Handle memory error structures produced based on old versions of standard 26 July 2015, 18:14:04 UTC
1a4e879 Thomas Gleixner 26 July 2015, 08:27:37 UTC x86/mm/pat: Revert 'Adjust default caching mode translation tables' Toshi explains: "No, the default values need to be set to the fallback types, i.e. minimal supported mode. For WC and WT, UC is the fallback type. When PAT is disabled, pat_init() does update the tables below to enable WT per the default BIOS setup. However, when PAT is enabled, but CPU has PAT -errata, WT falls back to UC per the default values." Revert: ca1fec58bc6a 'x86/mm/pat: Adjust default caching mode translation tables' Requested-by: Toshi Kani <toshi.kani@hp.com> Cc: Jan Beulich <jbeulich@suse.de> Link: http://lkml.kernel.org/r/1437577776.3214.252.camel@hp.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 26 July 2015, 08:27:37 UTC
2c534c0 Matt Fleming 21 July 2015, 14:55:09 UTC perf/x86/intel/cqm: Return cached counter value from IRQ context Peter reported the following potential crash which I was able to reproduce with his test program, [ 148.765788] ------------[ cut here ]------------ [ 148.765796] WARNING: CPU: 34 PID: 2840 at kernel/smp.c:417 smp_call_function_many+0xb6/0x260() [ 148.765797] Modules linked in: [ 148.765800] CPU: 34 PID: 2840 Comm: perf Not tainted 4.2.0-rc1+ #4 [ 148.765803] ffffffff81cdc398 ffff88085f105950 ffffffff818bdfd5 0000000000000007 [ 148.765805] 0000000000000000 ffff88085f105990 ffffffff810e413a 0000000000000000 [ 148.765807] ffffffff82301080 0000000000000022 ffffffff8107f640 ffffffff8107f640 [ 148.765809] Call Trace: [ 148.765810] <NMI> [<ffffffff818bdfd5>] dump_stack+0x45/0x57 [ 148.765818] [<ffffffff810e413a>] warn_slowpath_common+0x8a/0xc0 [ 148.765822] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765824] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765825] [<ffffffff810e422a>] warn_slowpath_null+0x1a/0x20 [ 148.765827] [<ffffffff811613f6>] smp_call_function_many+0xb6/0x260 [ 148.765829] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765831] [<ffffffff81161748>] on_each_cpu_mask+0x28/0x60 [ 148.765832] [<ffffffff8107f6ef>] intel_cqm_event_count+0x7f/0xe0 [ 148.765836] [<ffffffff811cdd35>] perf_output_read+0x2a5/0x400 [ 148.765839] [<ffffffff811d2e5a>] perf_output_sample+0x31a/0x590 [ 148.765840] [<ffffffff811d333d>] ? perf_prepare_sample+0x26d/0x380 [ 148.765841] [<ffffffff811d3497>] perf_event_output+0x47/0x60 [ 148.765843] [<ffffffff811d36c5>] __perf_event_overflow+0x215/0x240 [ 148.765844] [<ffffffff811d4124>] perf_event_overflow+0x14/0x20 [ 148.765847] [<ffffffff8107e7f4>] intel_pmu_handle_irq+0x1d4/0x440 [ 148.765849] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765853] [<ffffffff81219bad>] ? vunmap_page_range+0x19d/0x2f0 [ 148.765854] [<ffffffff81219d11>] ? unmap_kernel_range_noflush+0x11/0x20 [ 148.765859] [<ffffffff814ce6fe>] ? ghes_copy_tofrom_phys+0x11e/0x2a0 [ 148.765863] [<ffffffff8109e5db>] ? native_apic_msr_write+0x2b/0x30 [ 148.765865] [<ffffffff8109e44d>] ? x2apic_send_IPI_self+0x1d/0x20 [ 148.765869] [<ffffffff81065135>] ? arch_irq_work_raise+0x35/0x40 [ 148.765872] [<ffffffff811c8d86>] ? irq_work_queue+0x66/0x80 [ 148.765875] [<ffffffff81075306>] perf_event_nmi_handler+0x26/0x40 [ 148.765877] [<ffffffff81063ed9>] nmi_handle+0x79/0x100 [ 148.765879] [<ffffffff81064422>] default_do_nmi+0x42/0x100 [ 148.765880] [<ffffffff81064563>] do_nmi+0x83/0xb0 [ 148.765884] [<ffffffff818c7c0f>] end_repeat_nmi+0x1e/0x2e [ 148.765886] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765888] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765890] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765891] <<EOE>> [<ffffffff8110ab66>] finish_task_switch+0x156/0x210 [ 148.765898] [<ffffffff818c1671>] __schedule+0x341/0x920 [ 148.765899] [<ffffffff818c1c87>] schedule+0x37/0x80 [ 148.765903] [<ffffffff810ae1af>] ? do_page_fault+0x2f/0x80 [ 148.765905] [<ffffffff818c1f4a>] schedule_user+0x1a/0x50 [ 148.765907] [<ffffffff818c666c>] retint_careful+0x14/0x32 [ 148.765908] ---[ end trace e33ff2be78e14901 ]--- The CQM task events are not safe to be called from within interrupt context because they require performing an IPI to read the counter value on all sockets. And performing IPIs from within IRQ context is a "no-no". Make do with the last read counter value currently event in event->count when we're invoked in this context. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Will Auld <will.auld@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 26 July 2015, 08:22:29 UTC
26ae19a Linus Torvalds 26 July 2015, 03:11:12 UTC Merge tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here's a few USB and PHY fixes for 4.2-rc4. Nothing major, the shortlog has the full details. All of these have been in linux-next successfully" * tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) USB: OHCI: fix bad #define in ohci-tmio.c cdc-acm: Destroy acm_minors IDR on module exit usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors usb-storage: ignore ZTE MF 823 card reader in mode 0x1225 USB: OHCI: Fix race between ED unlink and URB submission usb: core: lpm: set lpm_capable for root hub device xhci: do not report PLC when link is in internal resume state xhci: prevent bus_suspend if SS port resuming in phase 1 xhci: report U3 when link is in resume state xhci: Calculate old endpoints correctly on device reset usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function xhci: Workaround to get D3 working in Intel xHCI xhci: call BIOS workaround to enable runtime suspend on Intel Braswell usb: dwc3: Reset the transfer resource index on SET_INTERFACE usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU usb: gadget: mv_udc_core: fix phy_regs I/O memory leak usb: ulpi: ulpi_init should be executed in subsys_initcall phy: berlin-usb: fix divider for BG2 phy: berlin-usb: fix divider for BG2CD phy/pxa: add HAS_IOMEM dependency ... 26 July 2015, 03:11:12 UTC
82b35f3 Linus Torvalds 26 July 2015, 03:05:07 UTC Merge tag 'tty-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small serial and tty fixes for reported issues. All have been in linux-next successfully" * tag 'tty-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: Fix !TASK_RUNNING diagnostic warning from paste_selection() serial: core: Fix crashes while echoing when closing m32r: Add ioreadXX/iowriteXX big-endian mmio accessors Revert "serial: imx: initialized DMA w/o HW flow enabled" sc16is7xx: fix FIFO address of secondary UART sc16is7xx: fix Kconfig dependencies serial: etraxfs-uart: Fix release etraxfs_uart_ports tty/vt: Fix the memory leak in visual_init serial: amba-pl011: Fix devm_ioremap_resource return value check n_tty: signal and flush atomically 26 July 2015, 03:05:07 UTC
b0de415 Linus Torvalds 26 July 2015, 03:03:10 UTC Merge tag 'staging-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a number of iio and staging driver fixes for reported issues for 4.2-rc4. All have been in linux-next for a while with no problems" * tag 'staging-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:light:stk3310: make endianness independent of host iio:light:stk3310: move device register to end of probe iio: mma8452: use iio event type IIO_EV_TYPE_MAG iio: mcp320x: Fix NULL pointer dereference iio: adc: vf610: fix the adc register read fail issue iio: mlx96014: Replace offset sign iio: magnetometer: mmc35240: fix SET/RESET sequence iio: magnetometer: mmc35240: Fix SET/RESET mask iio: magnetometer: mmc35240: Fix crash in pm suspend iio:magnetometer:bmc150_magn: output intended variable iio:magnetometer:bmc150_magn: add regmap dependency staging: vt6656: check ieee80211_bss_conf bssid not NULL staging: vt6655: check ieee80211_bss_conf bssid not NULL iio: tmp006: Check channel info on write iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able() iio:light:ltr501: fix regmap dependency iio:light:ltr501: fix variable in ltr501_init iio: sx9500: fix bug in compensation code iio: sx9500: rework error handling of raw readings iio: magnetometer: mmc35240: fix available sampling frequencies ... 26 July 2015, 03:03:10 UTC
e433b65 Linus Torvalds 26 July 2015, 02:50:59 UTC Merge tag 'char-misc-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some char and misc driver fixes for reported issues. One parport patch is reverted as it was incorrect, thanks to testing by the 0-day bot" * tag 'char-misc-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: parport: Revert "parport: fix memory leak" mei: prevent unloading mei hw modules while the device is opened. misc: mic: scif bug fix for vmalloc_to_page crash parport: fix freeing freed memory parport: fix memory leak parport: fix error handling 26 July 2015, 02:50:59 UTC
4e5a74f Sudip Mukherjee 25 July 2015, 07:49:40 UTC parport: Revert "parport: fix memory leak" This reverts commit 23c405912b88 ("parport: fix memory leak") par_dev->state was already being removed in parport_unregister_device(). Reported-by: Ying Huang <ying.huang@intel.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 25 July 2015, 19:48:05 UTC
763e326 Linus Torvalds 25 July 2015, 18:42:54 UTC Merge tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "Back in 3.16 the ftrace code was redesigned and cleaned up to remove the double iteration list (one for registered ftrace ops, and one for registered "global" ops), to just use one list. That simplified the code but also broke the function tracing filtering on pid. This updates the code to handle the filtering again with the new logic" * tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix breakage of set_ftrace_pid 25 July 2015, 18:42:54 UTC
4520083 Linus Torvalds 25 July 2015, 18:36:12 UTC Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm fix from Dan Williams: "A minor fix for the libnvdimm subsystem. This is not critical. The problem can be worked around in userspace by putting the namespace temporarily into raw mode (ndctl_namespace_set_raw_mode() from libndctl), but that is awkward for management utilities. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: libnvdimm: fix namespace seed creation 25 July 2015, 18:36:12 UTC
aca105a Linus Torvalds 25 July 2015, 18:24:58 UTC Merge tag 'md/4.2-fixes' of git://neil.brown.name/md Pull md fixes from Neil Brown: "Some md fixes for 4.2 Several are tagged for -stable. A few aren't because they are not very, serious or because they are in the 'experimental' cluster code" * tag 'md/4.2-fixes' of git://neil.brown.name/md: md/raid5: clear R5_NeedReplace when no longer needed. Fix read-balancing during node failure md-cluster: fix bitmap sub-offset in bitmap_read_sb md: Return error if request_module fails and returns positive value md: Skip cluster setup in case of error while reading bitmap md/raid1: fix test for 'was read error from last working device'. md: Skip cluster setup for dm-raid md: flush ->event_work before stopping array. md/raid10: always set reshape_safe when initializing reshape_position. md/raid5: avoid races when changing cache size. 25 July 2015, 18:24:58 UTC
32fd3d4 Linus Torvalds 25 July 2015, 18:19:38 UTC Merge tag 'for-linus-20150724' of git://git.infradead.org/linux-mtd Pull MTD fixes from Brian Norris: "Two trivial updates. I meant to send these much earlier, but I've been preoccupied. - Add MAINTAINERS entry for diskonchip g3 driver - Fix an overlooked conflict in bitfield value assignments The latter update is a bit overdue, but there's no reason to wait any longer" * tag 'for-linus-20150724' of git://git.infradead.org/linux-mtd: mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict MAINTAINERS: mtd: docg3: add docg3 maintainer 25 July 2015, 18:19:38 UTC
8ca2435 Dan Williams 25 July 2015, 03:42:34 UTC libnvdimm: fix namespace seed creation A new BLK namespace "seed" device is created whenever the current seed is successfully probed. However, if that namespace is assigned to a BTT it may never directly experience a successful probe as it is a subordinate device to a BTT configuration. The effect of the current code is that no new namespaces can be instantiated, after the seed namespace, to consume available BLK DPA capacity. Fix this by treating a successful BTT probe event as a successful probe event for the backing namespace. Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 25 July 2015, 16:57:56 UTC
33b4017 Linus Torvalds 25 July 2015, 00:00:04 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Four smaller fixes for the current series. This contains: - A fix for clones of discard bio's, that can cause data corruption. From Martin. - A fix for null_blk, where in certain queue modes it could access a request after it had been freed. From Mike Krinkin. - An error handling leak fix for blkcg, from Tejun. - Also from Tejun, export of the functions that a file system needs to implement cgroup writeback support" * 'for-linus' of git://git.kernel.dk/linux-block: block: Do a full clone when splitting discard bios block: export bio_associate_*() and wbc_account_io() blkcg: fix gendisk reference leak in blkg_conf_prep() null_blk: fix use-after-free problem 25 July 2015, 00:00:04 UTC
9fbf075 Linus Torvalds 24 July 2015, 23:54:59 UTC Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "A couple important fixes. - A block layer change which removed restriction on max transfer size led to silent data corruption on some devices. A new quirk is added to restore the old size limit for the reported device. If it gets reported on more devices, we might have to consider restoring the restriction for ATA devices by default. - There finally is a SSD which is confirmed to cause data corruption on TRIM regardless of which flavor is used. A new quirk is added and the device is blacklisted - Other device-specific workarounds" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Do not blacklist M510DC libata: increase the timeout when setting transfer mode libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit libata: force disable trim for SuperSSpeed S238 libata: add ATA_HORKAGE_NOTRIM libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER ata: pmp: add quirk for Marvell 4140 SATA PMP 24 July 2015, 23:54:59 UTC
1e63dca Linus Torvalds 24 July 2015, 23:43:16 UTC Merge tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.2 rc4. Note, most of the changes are for the sdhci-esdhc-imx controller, which also required us to modify some related DTS files. Those changes have been acked by the SoC maintainer. MMC core: - Fix a reference inbalance issue for power_ro_lock_show() sysfs handler MMC host: - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC - sdhci: Prevent a kernel panic while using DMA - mtk-sd: Let it depend on HAS_DMA to prevent build errors - sdhci-esdhc: Make 8BIT bus work - sdhci-esdhc-imx: Fix some regressions for DT based platforms - sdhci-pxav3: Fix a regression for DT based platforms" * tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pxav3: fix platform_data is not initialized dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support mmc: sdhci-esdhc-imx: clear f_max in boarddata mmc: sdhci-esdhc-imx: remove duplicated dts parsing mmc: sdhci: make max-frequency property in device tree work mmc: sdhci-esdhc-imx: move all non dt probe code into one function mmc: sdhci-esdhc-imx: fix cd regression for dt platform dts: imx7: fix sd card gpio polarity specified in device tree dts: imx25: fix sd card gpio polarity specified in device tree dts: imx6: fix sd card gpio polarity specified in device tree dts: imx53: fix sd card gpio polarity specified in device tree dts: imx51: fix sd card gpio polarity specified in device tree mmc: sdhci-esdhc: Make 8BIT bus work mmc: block: Add missing mmc_blk_put() in power_ro_lock_show() mmc: MMC_MTK should depend on HAS_DMA mmc: sdhci check parameters before call dma_free_coherent mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts mmc: omap_hsmmc: Fix DTO and DCRC handling 24 July 2015, 23:43:16 UTC
a52bd79 Linus Torvalds 24 July 2015, 23:33:11 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for the warnings/oops when handling HID devices with "unnamed" LEDs and couple of other driver fixups"" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - fix touch coordinates on WinBook TW100 and TW700 Input: LEDs - skip unnamed LEDs Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen Input: elantech - force resolution of 31 u/mm Input: zforce - don't overwrite the stack 24 July 2015, 23:33:11 UTC
afdf0b9 Linus Torvalds 24 July 2015, 20:14:06 UTC Merge tag 'regulator-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "As well as some driver specific fixes there's several fixes here for the core support for regulators supplying other regulators fixing both an issue with ACPI support (which had never been tested before) and some error handling and device removal issues that Javier noticed" * tag 'regulator-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Fix memory leak in regulator_resolve_supply() regulator: core: Increase refcount for regulator supply's module regulator: core: Handle full constraints systems when resolving supplies regulator: 88pm800: fix LDO vsel_mask value regulator: max8973: Fix up control flag option for bias control regulator: s2mps11: Fix GPIO suspend enable shift wrapping bug 24 July 2015, 20:14:06 UTC
365c83c Linus Torvalds 24 July 2015, 20:13:28 UTC Merge tag 'spi-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of pretty much unremarkable driver specific fixes here plus the addition of a new device ID to spidev which requires no other code changes" * tag 'spi-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: imx: Fix small DMA transfers spi: zynq: missing break statement spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA spi: spidev: add compatible value for LTC2488 spi: img-spfi: fix support for speeds up to 1/4th input clock 24 July 2015, 20:13:28 UTC
5b7f00a Linus Torvalds 24 July 2015, 19:50:19 UTC Merge tag 'sound-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This has been a calm week again: one minor lockdep fix for PCM core, and the most of the rest are HD-audio quirks and fixups for various chips and machines" * tag 'sound-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add headset mic pin quirk for a Dell device ALSA: hda - remove one pin from ALC292_STANDARD_PINS ALSA: hda - Add new GPU codec ID 0x10de007d to snd-hda ALSA: hda: add new AMD PCI IDs with proper driver caps ALSA: hda - Fix Skylake codec timeout ALSA: hda - Add headset mic support for Acer Aspire V5-573G ALSA: sparc: Add missing kfree in error path ALSA: pcm: Fix lockdep warning with nonatomic PCM ops 24 July 2015, 19:50:19 UTC
874bf9e Linus Torvalds 24 July 2015, 19:44:24 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - kernel crash fixes for multitouch and wacom drivers, by Brent Adam and Dan Carpenter - cp2112 data packet race condition corruption fix, by Antonio Borneo - a few new device IDs for wacom and microsoft drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: cp2112: fix to force single data-report reply HID: wacom: Enable pad device for older Bamboo Touch tablets HID: multitouch: Fix fields from pen report ID being interpreted for multitouch HID: microsoft: Add quirk for MS Surface Type/Touch cover HID: wacom: NULL dereferences on error in probe() 24 July 2015, 19:44:24 UTC
077b205 Linus Torvalds 24 July 2015, 19:37:29 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Aome amdgpu, one i915, one ttm and one hlcdc, nothing too scary. All seems fine for about this time" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: recognize ARM64 arch in ioprot handler drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels drm/amdgpu/cz: implement voltage validation properly drm/amdgpu: add VCE harvesting instance query drm/amdgpu: implement VCE 3.0 harvesting support (v4) drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC drm: Stop resetting connector state to unknown drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls drm: atmel-hlcdc: fix vblank initial state 24 July 2015, 19:37:29 UTC
b497500 Linus Torvalds 24 July 2015, 19:31:30 UTC Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bugfix from Chris Metcalf: "This fixes a bug in freeing the initramfs memory" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use free_bootmem_late() for initrd 24 July 2015, 19:31:30 UTC
c624406 Linus Torvalds 24 July 2015, 19:23:06 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Everything related to the new quirks and memory type features: - small improvements to the quirks API - extending one of the quirks from just AMD to Intel as well, because 4.2 can show the same problem with problematic firmware on Intel too" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: rename quirk constants to KVM_X86_QUIRK_* KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED KVM: x86: introduce kvm_check_has_quirk KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type KVM: MTRR: fix memory type handling if MTRR is completely disabled 24 July 2015, 19:23:06 UTC
e3eea14 Steven Rostedt (Red Hat) 24 July 2015, 14:38:12 UTC ftrace: Fix breakage of set_ftrace_pid Commit 4104d326b670 ("ftrace: Remove global function list and call function directly") simplified the ftrace code by removing the global_ops list with a new design. But this cleanup also broke the filtering of PIDs that are added to the set_ftrace_pid file. Add back the proper hooks to have pid filtering working once again. Cc: stable@vger.kernel.org # 3.16+ Reported-by: Matt Fleming <matt@console-pimps.org> Reported-by: Richard Weinberger <richard.weinberger@gmail.com> Tested-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 24 July 2015, 17:58:14 UTC
8b5a359 Bastien Nocera 24 July 2015, 16:08:53 UTC Input: goodix - fix touch coordinates on WinBook TW100 and TW700 The touchscreen on the WinBook TW100 and TW700 don't match the default display, with 0,0 touches being reported when touching at the bottom right of the screen. 1280,800 0,800 +-------------+ | | | | | | +-------------+ 1280,0 0,0 It's unfortunately impossible to detect this problem with data from the DSDT, or other auxiliary metadata, so fallback to quirking this specific model of tablet instead. Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 24 July 2015, 16:11:02 UTC
b38ebd1 Dmitry Torokhov 22 July 2015, 21:56:39 UTC Input: LEDs - skip unnamed LEDs Devices may declare more LEDs than what is known to input-leds (HID does this for some devices). Instead of showing ugly warnings on connect and, even worse, oopsing on disconnect, let's simply ignore LEDs that are not known to us. Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 24 July 2015, 16:11:01 UTC
0c38ec7 Mark Brown 24 July 2015, 15:19:50 UTC Merge remote-tracking branches 'spi/fix/gqspi', 'spi/fix/imx', 'spi/fix/mg-spfi' and 'spi/fix/spidev' into spi-linus 24 July 2015, 15:19:50 UTC
4c7d83e Mark Brown 24 July 2015, 15:19:25 UTC Merge remote-tracking branches 'regulator/fix/88pm800', 'regulator/fix/max8973', 'regulator/fix/s2mps11' and 'regulator/fix/supply' into regulator-linus 24 July 2015, 15:19:25 UTC
7055a31 Mark Brown 24 July 2015, 15:19:25 UTC Merge remote-tracking branch 'regulator/fix/core' into regulator-linus 24 July 2015, 15:19:25 UTC
f6ee9b5 Sascha Hauer 24 July 2015, 13:01:08 UTC spi: imx: Fix small DMA transfers DMA transfers must be greater than the watermark level size. spi_imx->rx_wml and spi_imx->tx_wml contain the watermark level in 32bit words whereas struct spi_transfer contains the transfer len in bytes. Fix the check if DMA is possible for a transfer accordingly. This fixes transfers with sizes between 33 and 128 bytes for which previously was claimed that DMA is possible. Fixes: f62caccd12c17e4 (spi: spi-imx: add DMA support) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> 24 July 2015, 15:08:55 UTC
c0c3322 Denys Vlasenko 24 July 2015, 12:16:43 UTC x86/asm/entry/32: Revert 'Do not use R9 in SYSCALL32' commit This change reverts most of commit 53e9accf0f 'Do not use R9 in SYSCALL32'. I don't yet understand how, but code in that commit sometimes fails to preserve EBP. See https://bugzilla.kernel.org/show_bug.cgi?id=101061 "Problems while executing 32-bit code on AMD64" Reported-and-tested-by: Krzysztof A. Sobiecki <sobkas@gmail.com> Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Will Drewry <wad@chromium.org> Cc: Kees Cook <keescook@chromium.org> CC: x86@kernel.org Link: http://lkml.kernel.org/r/1437740203-11552-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 24 July 2015, 14:36:00 UTC
8a0a5da Thomas Gleixner 24 July 2015, 14:13:43 UTC x86/mm: Fix newly introduced printk format warnings Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 24 July 2015, 14:35:33 UTC
9cd7604 Jingju Hou 23 July 2015, 09:56:23 UTC mmc: sdhci-pxav3: fix platform_data is not initialized pdev->dev.platform_data is not initialized if match is true in function sdhci_pxav3_probe. Just local variable pdata is assigned the return value from function pxav3_get_mmc_pdata(). static int sdhci_pxav3_probe(struct platform_device *pdev) { struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; ... if (match) { ret = mmc_of_parse(host->mmc); if (ret) goto err_of_parse; sdhci_get_of_property(pdev); pdata = pxav3_get_mmc_pdata(dev); } ... } Signed-off-by: Jingju Hou <houjingj@marvell.com> Fixes: b650352dd3df("mmc: sdhci-pxa: Add device tree support") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:39 UTC
cae13e7 Dong Aisheng 22 July 2015, 12:53:10 UTC dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support It's not supported by driver anymore after using runtime pm and there's no user of it, so delete it now. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:39 UTC
a3bd4f9 Dong Aisheng 22 July 2015, 12:53:09 UTC mmc: sdhci-esdhc-imx: clear f_max in boarddata After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), it's not used anymore. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:38 UTC
2e05d66 Dong Aisheng 22 July 2015, 12:53:08 UTC mmc: sdhci-esdhc-imx: remove duplicated dts parsing After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), we do not need those duplicated parsing anymore. Note: fsl,cd-controller is also deleted due to the driver does not support controller card detection anymore after switch to runtime pm. And there's no user of it right now in device tree. wp-gpios is kept because we're still support fsl,wp-controller, so we need a way to check if it's gpio wp or controller wp. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:38 UTC
5924175 Dong Aisheng 22 July 2015, 12:53:07 UTC mmc: sdhci: make max-frequency property in device tree work Device tree provides option to specify the max freqency with property "max-frequency" in dts and common parse function mmc_of_parse() will parse it and use this value to set host->f_max to tell the MMC core the maxinum frequency the host works. However, current sdhci driver will finally overwrite this value with host->max_clk regardless of the max-frequency property. This patch makes sure not overwrite the max-frequency set from device tree and do basic sanity check. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:37 UTC
91fa425 Dong Aisheng 22 July 2015, 12:53:06 UTC mmc: sdhci-esdhc-imx: move all non dt probe code into one function This is an incremental fix of commit e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards"). After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width again for dt platform since those are already handled by mmc_of_parse(). Current code only exclude the checking of wp_type for dt platform which does not make sense. This patch moves all non dt probe code into one function. Besides, since we only support SD3.0/eMMC HS200 for dt platform, the support_vsel checking and ultra high speed pinctrl state are also merged into sdhci_esdhc_imx_probe_dt. Then we have two separately probe function for dt and non dt type. This can make the driver probe more clearly. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:37 UTC
4800e87 Dong Aisheng 22 July 2015, 12:53:05 UTC mmc: sdhci-esdhc-imx: fix cd regression for dt platform Current card detect probe process is that when driver finds a valid ESDHC_CD_GPIO, it will clear the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION which is set by default for all esdhc/usdhc controllers. Then host driver will know there's a valid card detect function. Commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()") breaks GPIO CD function for dt platform that it will return directly when find ESDHC_CD_GPIO for dt platform which result in the later wrongly to keep SDHCI_QUIRK_BROKEN_CARD_DETECTION for all dt platforms. Then MMC_CAP_NEEDS_POLL will be used instead even there's a valid GPIO card detect. This patch adds back this function and follows the original approach to clear the quirk if find an valid CD GPIO for dt platforms. Fixes: 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()") Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:37 UTC
1cd5594 Dong Aisheng 22 July 2015, 12:53:04 UTC dts: imx7: fix sd card gpio polarity specified in device tree cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:36 UTC
cf75eb1 Dong Aisheng 22 July 2015, 12:53:03 UTC dts: imx25: fix sd card gpio polarity specified in device tree cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:36 UTC
89c1a8c Dong Aisheng 22 July 2015, 12:53:02 UTC dts: imx6: fix sd card gpio polarity specified in device tree cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:35 UTC
94d7694 Dong Aisheng 22 July 2015, 12:53:01 UTC dts: imx53: fix sd card gpio polarity specified in device tree cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:35 UTC
aca45c0 Dong Aisheng 22 July 2015, 12:53:00 UTC dts: imx51: fix sd card gpio polarity specified in device tree cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:34 UTC
8e91125 Joakim Tjernlund 22 July 2015, 14:44:26 UTC mmc: sdhci-esdhc: Make 8BIT bus work Support for 8BIT bus with was added some time ago to sdhci-esdhc but then missed to remove the 8BIT from the reserved bit mask which made 8BIT non functional. Fixes: 66b50a00992d ("mmc: esdhc: Add support for 8-bit bus width and..") Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:34 UTC
9098f84 Tomas Winkler 16 July 2015, 13:50:45 UTC mmc: block: Add missing mmc_blk_put() in power_ro_lock_show() Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler, let's add it. Fixes: add710eaa886 ("mmc: boot partition ro lock support") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:34 UTC
c2b22ff Geert Uytterhoeven 26 June 2015, 12:09:26 UTC mmc: MMC_MTK should depend on HAS_DMA If NO_DMA=y: ERROR: "dma_alloc_coherent" [drivers/mmc/host/mtk-sd.ko] undefined! ERROR: "dma_unmap_sg" [drivers/mmc/host/mtk-sd.ko] undefined! ERROR: "dma_map_sg" [drivers/mmc/host/mtk-sd.ko] undefined! ERROR: "dma_free_coherent" [drivers/mmc/host/mtk-sd.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:33 UTC
7ac0203 Peng Fan 22 June 2015, 03:41:23 UTC mmc: sdhci check parameters before call dma_free_coherent We should not call dma_free_coherent if host->adma_table is NULL, otherwise may trigger panic. Fixes: d1e49f77d7c7 ("mmc: sdhci: convert ADMA descriptors to a...") Signed-off-by: Peng Fan <van.freenix@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:27 UTC
5027cd1 Vignesh R 16 June 2015, 10:37:18 UTC mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts Sometimes BADA, DEB or CEB error interrupts occur when sd card is unplugged during data transfer. These interrupts are currently ignored by the interrupt handler. But, this results in card not being recognised on subsequent insertion. This is because mmcqd is waiting forever for the data transfer(for which error occurred) to complete. Fix this, by reporting BADA, DEB, CEB errors to mmc-core as -EILSEQ, so that the core can do appropriate handling. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:21 UTC
408806f Kishon Vijay Abraham I 16 June 2015, 10:37:17 UTC mmc: omap_hsmmc: Fix DTO and DCRC handling DTO/DCRC errors were not being informed to the mmc core since commit ae4bf788ee9b ("mmc: omap_hsmmc: consolidate error report handling of HSMMC IRQ"). This commit made sure 'end_trans' is never set on DTO/DCRC errors. This is because after this commit 'host->data' is checked after it has been cleared to NULL by omap_hsmmc_dma_cleanup(). Because 'end_trans' is never set, omap_hsmmc_xfer_done() is never invoked making core layer not to be aware of DTO/DCRC errors. Because of this any command invoked after DTO/DCRC error leads to a hang. Fix this by checking for 'host->data' before it is actually cleared. Fixes: ae4bf788ee9b ("mmc: omap_hsmmc: consolidate error report handling of HSMMC IRQ") CC: stable@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 24 July 2015, 08:18:13 UTC
02bbc4d Dave Airlie 24 July 2015, 04:27:44 UTC Merge tag 'drm-atmel-hlcdc/fixes-for-4.2' of https://github.com/bbrezillon/linux-at91 into drm-fixes single hlcdc fix. * tag 'drm-atmel-hlcdc/fixes-for-4.2' of https://github.com/bbrezillon/linux-at91: drm: atmel-hlcdc: fix vblank initial state 24 July 2015, 04:27:44 UTC
e6030cb NeilBrown 17 July 2015, 03:26:23 UTC md/raid5: clear R5_NeedReplace when no longer needed. This flag is currently never cleared, which can in rare cases trigger a warn-on if it is still set but the block isn't InSync. So clear it when it isn't need, which includes if the replacement device has failed. Signed-off-by: NeilBrown <neilb@suse.com> 24 July 2015, 03:38:04 UTC
90382ed Goldwyn Rodrigues 24 June 2015, 14:30:32 UTC Fix read-balancing during node failure During a node failure, We need to suspend read balancing so that the reads are directed to the first device and stale data is not read. Suspending writes is not required because these would be recorded and synced eventually. A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep(). area_resyncing() will respond true for the entire devices if this flag is set and the request type is READ. The flag is cleared in recover_done(). Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reported-By: David Teigland <teigland@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> 24 July 2015, 03:37:59 UTC
33e38ac Goldwyn Rodrigues 01 July 2015, 02:19:56 UTC md-cluster: fix bitmap sub-offset in bitmap_read_sb bitmap_read_sb is modifying mddev->bitmap_info.offset. This works for the first bitmap read. However, when multiple bitmaps need to be opened by the same node, it ends up corrupting the offset. Fix it by using a local variable. Also, bitmap_read_sb is not required in bitmap_copy_from_slot since it is called in bitmap_create. Remove bitmap_read_sb(). Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> 24 July 2015, 03:37:55 UTC
b0c26a7 Goldwyn Rodrigues 22 July 2015, 17:09:15 UTC md: Return error if request_module fails and returns positive value request_module() can return 256 (process exited) in some cases, which is not as specified in the documentation before the request_module() definition. Convert the error to -ENOENT. The positive error number results in bitmap_create() returning a value that is meant to be an error but doesn't look like one, so it is dereferenced as a point and causes a crash. (not needed for stable as this is "experimental" code) Fixes: edb39c9deda8 ("Introduce md_cluster_operations to handle cluster functions") Signed-off-By: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> 24 July 2015, 03:37:51 UTC
f735727 Goldwyn Rodrigues 22 July 2015, 17:09:16 UTC md: Skip cluster setup in case of error while reading bitmap If the bitmap read fails, the error code set is -EINVAL. However, we don't check for errors and go ahead with cluster_setup. Skip the cluster setup in case of error. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> 24 July 2015, 03:37:48 UTC
34cab6f NeilBrown 23 July 2015, 23:22:16 UTC md/raid1: fix test for 'was read error from last working device'. When we get a read error from the last working device, we don't try to repair it, and don't fail the device. We simple report a read error to the caller. However the current test for 'is this the last working device' is wrong. When there is only one fully working device, it assumes that a non-faulty device is that device. However a spare which is rebuilding would be non-faulty but so not the only working device. So change the test from "!Faulty" to "In_sync". If ->degraded says there is only one fully working device and this device is in_sync, this must be the one. This bug has existed since we allowed read_balance to read from a recovering spare in v3.0 Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Fixes: 76073054c95b ("md/raid1: clean up read_balance.") Cc: stable@vger.kernel.org (v3.0+) Signed-off-by: NeilBrown <neilb@suse.com> 24 July 2015, 03:37:21 UTC
b37b425 Dave Airlie 24 July 2015, 01:52:35 UTC Merge tag 'topic/drm-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-fixes Regression fix for systemd getting confused about unknown connector state after resume. Just stop setting the state to unknown, turned out to be a silly idea anyway. What drivers imo really should do (and i915 still does that) is forcing a full reprobe on resume to make sure connector changes while suspended are caught. Most drivers seem to get this wrong. Otoh it took us years to get fixes merged where some probe races resulted in eating uevents, I guess userspace expectations for reliable hpd are just really low :( * tag 'topic/drm-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel: drm: Stop resetting connector state to unknown 24 July 2015, 01:52:35 UTC
4db9a82 Dave Airlie 24 July 2015, 01:52:09 UTC Merge tag 'drm-intel-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-fixes arb_timer kernel side fix from Chris. * tag 'drm-intel-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel: drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls 24 July 2015, 01:52:09 UTC
762043a Dave Airlie 24 July 2015, 01:51:18 UTC Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Some amdgpu fixes. * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels drm/amdgpu/cz: implement voltage validation properly drm/amdgpu: add VCE harvesting instance query drm/amdgpu: implement VCE 3.0 harvesting support (v4) drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC 24 July 2015, 01:51:18 UTC
f135b97 Alexandre Courbot 01 July 2015, 08:32:29 UTC drm/ttm: recognize ARM64 arch in ioprot handler Return proper pgprot for ARM64. This is required for objects like Nouveau fences to be mapped with expected coherency. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 24 July 2015, 01:51:14 UTC
61e86cc Peter Hurley 13 July 2015, 00:47:35 UTC tty: vt: Fix !TASK_RUNNING diagnostic warning from paste_selection() Pasting text with gpm on a VC produced warning [1]. Reset task state to TASK_RUNNING in the paste_selection() loop, if the loop did not sleep. [1] WARNING: CPU: 6 PID: 1960 at /home/peter/src/kernels/mainline/kernel/sched/core.c:7286 __might_sleep+0x7f/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8151805e>] paste_selection+0x9e/0x1a0 Modules linked in: btrfs xor raid6_pq ufs qnx4 hfsplus hfs minix ntfs msdos jfs xfs libcrc32c ..... CPU: 6 PID: 1960 Comm: gpm Not tainted 4.1.0-rc7+tty-xeon+debug #rc7+tty Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff81c9c0a0 ffff8802b0fd3ac8 ffffffff8185778a 0000000000000001 ffff8802b0fd3b18 ffff8802b0fd3b08 ffffffff8108039a ffffffff82ae8510 ffffffff81c9ce00 0000000000000015 0000000000000000 0000000000000000 Call Trace: [<ffffffff8185778a>] dump_stack+0x4f/0x7b [<ffffffff8108039a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff81080416>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810ddced>] ? __lock_acquire+0xe2d/0x13a0 [<ffffffff8151805e>] ? paste_selection+0x9e/0x1a0 [<ffffffff8151805e>] ? paste_selection+0x9e/0x1a0 [<ffffffff810ad4ff>] __might_sleep+0x7f/0x90 [<ffffffff8185f76a>] down_read+0x2a/0xa0 [<ffffffff810bb1d8>] ? sched_clock_cpu+0xb8/0xe0 [<ffffffff8150d1dc>] n_tty_receive_buf_common+0x4c/0xba0 [<ffffffff810dc875>] ? mark_held_locks+0x75/0xa0 [<ffffffff81861c95>] ? _raw_spin_unlock_irqrestore+0x65/0x80 [<ffffffff810b49a1>] ? get_parent_ip+0x11/0x50 [<ffffffff8150dd44>] n_tty_receive_buf2+0x14/0x20 [<ffffffff81518117>] paste_selection+0x157/0x1a0 [<ffffffff810b77b0>] ? wake_up_state+0x20/0x20 [<ffffffff815203f8>] tioclinux+0xb8/0x2c0 [<ffffffff81515bfe>] vt_ioctl+0xaee/0x11a0 [<ffffffff810baf75>] ? sched_clock_local+0x25/0x90 [<ffffffff810bbe11>] ? vtime_account_user+0x91/0xa0 [<ffffffff8150810c>] tty_ioctl+0x20c/0xe20 [<ffffffff810bbe11>] ? vtime_account_user+0x91/0xa0 [<ffffffff810b49a1>] ? get_parent_ip+0x11/0x50 [<ffffffff810b4a69>] ? preempt_count_sub+0x49/0x50 [<ffffffff811ab71c>] ? context_tracking_exit+0x5c/0x290 [<ffffffff811ab71c>] ? context_tracking_exit+0x5c/0x290 [<ffffffff81248b98>] do_vfs_ioctl+0x318/0x570 [<ffffffff810dca8d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810dc9b5>] ? trace_hardirqs_on_caller+0x115/0x1e0 [<ffffffff81254acc>] ? __fget_light+0x6c/0xa0 [<ffffffff81248e71>] SyS_ioctl+0x81/0xa0 [<ffffffff81862832>] system_call_fastpath+0x16/0x7a Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2015, 01:08:29 UTC
e144c58 Peter Hurley 13 July 2015, 01:05:26 UTC serial: core: Fix crashes while echoing when closing While closing, new rx data may be received after the input buffers have been flushed but before stop_rx() halts receiving [1]. The new data might not be processed by flush_to_ldisc() until after uart_shutdown() and normal input processing is re-enabled (ie., tty->closing = 0). The race is outlined below: CPU 0 | CPU 1 | uart_close() | tty_port_close_start() | tty->closing = 1 | tty_ldisc_flush() | | => IRQ | while (LSR & data ready) | uart_insert_char() | tty_flip_buffer_push() | <= EOI stop_rx() | . uart_shutdown() | . free xmit.buf | . tty_port_tty_set(NULL) | . tty->closing = 0 | . | flush_to_ldisc() | n_tty_receive_buf_common() | __receive_buf() | ... | commit_echoes() | uart_flush_chars() | __uart_start() | ** OOPS on port.tty deref ** tty_ldisc_flush() | Input processing must be prevented from echoing (tty->closing = 1) until _after_ the input buffers have been flushed again at the end of uart_close(). [1] In fact, some input may actually be buffered _after_ stop_rx() since the rx interrupt may have already triggered but not yet been handled when stop_rx() disables rx interrupts. Fixes: 2e758910832d ("serial: core: Flush ldisc after dropping port mutex in uart_close()") Reported-by: Robert Elliott <elliott@hp.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2015, 01:08:28 UTC
7525a99 Peter Hurley 09 July 2015, 03:10:06 UTC m32r: Add ioreadXX/iowriteXX big-endian mmio accessors commit c627f2ceb692 ("serial: 8250: Add support for big-endian MMIO accesses") added support for 32-bit big-endian mmio to the 8250 driver. Support for ioreadXXbe/iowriteXXbe io accessors was missing from m32r arch, which caused build errors. Add trivial macro mmio accessors. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2015, 01:08:28 UTC
907eda3 David Jander 26 June 2015, 06:11:30 UTC Revert "serial: imx: initialized DMA w/o HW flow enabled" This reverts commit 068500e08dc87ea9a453cc4a500cf3ab28d0f936. According to some tests, SDMA support is broken at least for i.MX6 without HW flow control. Different forms of data-corruption appear either with the ROM firmware for the SDMA controller as well as when loading Freescale provided SDMA firmware versions 1.1 or 3.1. Signed-off-by: David Jander <david@protonic.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2015, 00:40:14 UTC
dec273e Bo Svangård 13 June 2015, 11:40:20 UTC sc16is7xx: fix FIFO address of secondary UART Calls to regmap_raw_read/write needed register rewrite in a similar way as function calls to regmap_read/write already had. This enables reading/writing the serial datastream to the device. Signed-off-by: Bo Svangård <bo.svangard@embeddedart.se> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 22:32:32 UTC
32aa633 Jakub Kicinski 01 July 2015, 12:19:52 UTC sc16is7xx: fix Kconfig dependencies When I2C=m and SPI=y or-ing them will produce =y while what we need is the lower bound, i.e. =m. Fortunately SPI is a boolean so we need to handle only one special case. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 22:32:32 UTC
d8c2c0d Axel Lin 28 June 2015, 01:45:08 UTC serial: etraxfs-uart: Fix release etraxfs_uart_ports In probe, we use dev_id as array index of etraxfs_uart_ports and store the index in port->line. So etraxfs_uart_ports[port->line] should be released when unload the module. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Niklas Cassel <nks@flawful.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 22:25:38 UTC
f3f5da6 Martin K. Petersen 22 July 2015, 11:57:12 UTC block: Do a full clone when splitting discard bios This fixes a data corruption bug when using discard on top of MD linear, raid0 and raid10 personalities. Commit 20d0189b1012 "block: Introduce new bio_split()" permits sharing the bio_vec between the two resulting bios. That is fine for read/write requests where the bio_vec is immutable. For discards, however, we need to be able to attach a payload and update the bio_vec so the page can get mapped to a scatterlist entry. Therefore the bio_vec can not be shared when splitting discards and we must do a full clone. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Seunguk Shin <seunguk.shin@samsung.com> Tested-by: Seunguk Shin <seunguk.shin@samsung.com> Cc: Seunguk Shin <seunguk.shin@samsung.com> Cc: Jens Axboe <axboe@fb.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: <stable@vger.kernel.org> # v3.14+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> 23 July 2015, 22:21:34 UTC
08b3324 Dongxing Zhang 10 June 2015, 07:21:10 UTC tty/vt: Fix the memory leak in visual_init If vc->vc_uni_pagedir_loc is not NULL, its refcount needs to be decreased before vc_uni_pagedir_loc is re-assigned. unreferenced object 0xffff88002cdd13b0 (size 512): comm "setfont", pid 503, jiffies 4294896503 (age 722.828s) hex dump (first 32 bytes): 40 92 61 2b 00 88 ff ff 00 00 00 00 00 00 00 00 @.a+............ 00 00 00 00 00 00 00 00 a0 ad 61 2b 00 88 ff ff ..........a+.... backtrace: [<ffffffff817b755e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811d4898>] kmem_cache_alloc_trace+0x1c8/0x240 [<ffffffff814ae7d3>] con_do_clear_unimap.isra.2+0x83/0xe0 [<ffffffff814ae9b2>] con_clear_unimap+0x22/0x40 [<ffffffff814a8db8>] vt_ioctl+0xeb8/0x1170 [<ffffffff8149b458>] tty_ioctl+0x208/0xca0 [<ffffffff81207858>] do_vfs_ioctl+0x2f8/0x510 [<ffffffff81207af1>] SyS_ioctl+0x81/0xa0 [<ffffffff817ca2b2>] system_call_fastpath+0x16/0x75 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff88002b619240 (size 256): comm "setfont", pid 503, jiffies 4294896503 (age 722.828s) hex dump (first 32 bytes): 90 bc 84 d5 00 88 ff ff 58 85 84 d5 00 88 ff ff ........X....... 88 ac 84 d5 00 88 ff ff e0 b1 84 d5 00 88 ff ff ................ backtrace: [<ffffffff817b755e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811d4898>] kmem_cache_alloc_trace+0x1c8/0x240 [<ffffffff814ae286>] con_insert_unipair+0x86/0x170 [<ffffffff814af107>] con_set_unimap+0x1b7/0x280 [<ffffffff814a8d65>] vt_ioctl+0xe65/0x1170 [<ffffffff8149b458>] tty_ioctl+0x208/0xca0 [<ffffffff81207858>] do_vfs_ioctl+0x2f8/0x510 [<ffffffff81207af1>] SyS_ioctl+0x81/0xa0 [<ffffffff817ca2b2>] system_call_fastpath+0x16/0x75 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Dongxing Zhang <dongxing.zhang@intel.com> Signed-off-by: Xiaoming Wang <xiaoming.wang@intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 22:11:08 UTC
97a60ea Krzysztof Kozlowski 09 July 2015, 13:21:41 UTC serial: amba-pl011: Fix devm_ioremap_resource return value check Value returned by devm_ioremap_resource() was checked for non-NULL but devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of error this could lead to dereference of ERR_PTR. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: <stable@vger.kernel.org> Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 22:05:53 UTC
3b19e03 Peter Hurley 27 June 2015, 13:21:32 UTC n_tty: signal and flush atomically When handling signalling char, claim the termios write lock before signalling waiting readers and writers to prevent further i/o before flushing the echo and output buffers. This prevents a userspace signal handler which may output from racing the terminal flush. Reference: Bugzilla #99351 ("Output truncated in ssh session after...") Fixes: commit d2b6f44779d3 ("n_tty: Fix signal handling flushes") Reported-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 22:05:53 UTC
9684917 Bernhard Bender 23 July 2015, 20:58:08 UTC Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Cc: stable@vger.kernel.org Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 23 July 2015, 21:43:17 UTC
00243b1 Greg Kroah-Hartman 23 July 2015, 20:32:05 UTC Merge tag 'iio-fixes-for-4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: 3rd round of IIO fixes for the 4.2 cycle. * bmc150_magn - add missing regmap dependency and ensure on a wrong chip case report hte chip id rather than a previous return value. * mmc35240 - Fill a null pointer derefrence and wrong SET / RESET logic that results in North and South being swapped. * mlx96014 - correct the offset value reported to userspace (wrong sign) * vf610 - Prevent non aligned register reading. * mcp320x - Another null pointer deference bug. * mma8452 - change threshold type from THRESH to MAG to reflect the fact that the sign of the signal is not known when the event is signaled. * stk3310 - move device registert to end of probe to avoid race conditions when coming up, check for invalid client->irq values and make it work for both endian types of host. 23 July 2015, 20:32:05 UTC
45b4b78 Linus Torvalds 23 July 2015, 20:16:21 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "While reading through the code of detach_mounts I realized the code was slightly off. Testing it revealed two buggy corner cases that can send the code of detach_mounts into an infinite loop. Fixing the code to do the right thing removes the possibility of these user triggered infinite loops in the code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: mnt: In detach_mounts detach the appropriate unmounted mount mnt: Clarify and correct the disconnect logic in umount_tree 23 July 2015, 20:16:21 UTC
d1a343a Linus Torvalds 23 July 2015, 20:07:04 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio/vhost fixes from Michael Tsirkin: "Bugfixes and documentation fixes. Igor's patch that allows users to tweak memory table size is borderline, but it does fix known crashes, so I merged it" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: add max_mem_regions module parameter vhost: extend memory regions allocation to vmalloc 9p/trans_virtio: reset virtio device on remove virtio/s390: rename drivers/s390/kvm -> drivers/s390/virtio MAINTAINERS: separate section for s390 virtio drivers virtio: define virtio_pci_cfg_cap in header. virtio: Fix typecast of pointer in vring_init() virtio scsi: fix unused variable warning vhost: use binary search instead of linear in find_region() virtio_net: document VIRTIO_NET_CTRL_GUEST_OFFLOADS 23 July 2015, 20:07:04 UTC
5aa2a96 Tejun Heo 23 July 2015, 18:27:09 UTC block: export bio_associate_*() and wbc_account_io() bio_associate_blkcg(), bio_associate_current() and wbc_account_io() are used to implement cgroup writeback support for filesystems and thus need to be exported. Export them. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <axboe@fb.com> 23 July 2015, 19:36:44 UTC
b681268 Linus Torvalds 23 July 2015, 19:25:44 UTC Merge tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "The fixes include: - a couple of fixes for the new ARM-SMMUv3 driver to fix issues found on the first real implementation of that hardware. - a patch for the Intel VT-d driver to fix a domain-id leak" * tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix VM domain ID leak iommu/arm-smmu: Skip the execution of CMD_PREFETCH_CONFIG iommu/arm-smmu: Enlarge STRTAB_L1_SZ_SHIFT to support larger sidsize iommu/arm-smmu: Fix the values of ARM64_TCR_{I,O}RGN0_SHIFT iommu/arm-smmu: Fix LOG2SIZE setting for 2-level stream tables iommu/arm-smmu: Fix the index calculation of strtab 23 July 2015, 19:25:44 UTC
acc6a1a Alex Deucher 22 July 2015, 16:03:50 UTC drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels VCE, UVD DPM work similarly to SCLK DPM. Report the current clock levels for UVD and VCE via debugfs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 23 July 2015, 19:10:32 UTC
f2d52cd Alex Deucher 14 July 2015, 20:16:29 UTC drm/amdgpu/cz: implement voltage validation properly CZ uses a different set of registers compared to previous asics and supports separate NB and GFX planes. Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 23 July 2015, 19:09:27 UTC
3f81d24 Chris Metcalf 23 July 2015, 18:11:09 UTC tile: use free_bootmem_late() for initrd We were previously using free_bootmem() and just getting lucky that nothing too bad happened. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: stable@vger.kernel.org 23 July 2015, 18:11:09 UTC
fe78fcc Eric W. Biederman 17 July 2015, 19:54:27 UTC mnt: In detach_mounts detach the appropriate unmounted mount The handling of in detach_mounts of unmounted but connected mounts is buggy and can lead to an infinite loop. Correct the handling of unmounted mounts in detach_mount. When the mountpoint of an unmounted but connected mount is connected to a dentry, and that dentry is deleted we need to disconnect that mount from the parent mount and the deleted dentry. Nothing changes for the unmounted and connected children. They can be safely ignored. Cc: stable@vger.kernel.org Fixes: ce07d891a0891d3c0d0c2d73d577490486b809e1 mnt: Honor MNT_LOCKED when detaching mounts Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 23 July 2015, 16:31:15 UTC
fa92754 Leo Liu 13 July 2015, 16:46:23 UTC drm/amdgpu: add VCE harvesting instance query Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> 23 July 2015, 15:09:45 UTC
6a58577 Alex Deucher 10 July 2015, 18:16:24 UTC drm/amdgpu: implement VCE 3.0 harvesting support (v4) For boards with bad VCE blocks, only configure the working block. v2: use the harvest info for pipe setup v3: fix mask check as noted by Leo v4: add dGPU support Reviewed-by: Christian König <christian.koenig@amd.com> (v2) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 23 July 2015, 15:09:44 UTC
5e6775a Michel Dänzer 17 July 2015, 02:20:18 UTC drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC This doesn't seem strictly necessary with Tonga right now, but that might change with future power management enhancements. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> 23 July 2015, 15:09:43 UTC
d84b272 Michel Dänzer 16 July 2015, 01:45:10 UTC drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK register while the CRTC is off, which caused e.g. glxgears or gnome-shell to hang after a modeset. Reviewed-and-Tested-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> 23 July 2015, 15:09:43 UTC
46ebb7a Alex Williamson 14 July 2015, 20:48:53 UTC iommu/vt-d: Fix VM domain ID leak This continues the attempt to fix commit fb170fb4c548 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability"). The previous attempt in commit 71684406905f ("iommu/vt-d: Detach domain *only* from attached iommus") overlooked the fact that dmar_domain.iommu_bmp gets cleared for VM domains when devices are detached: intel_iommu_detach_device domain_remove_one_dev_info domain_detach_iommu The domain is detached from the iommu, but the iommu is still attached to the domain, for whatever reason. Thus when we get to domain_exit(), we can't rely on iommu_bmp for VM domains to find the active iommus, we must check them all. Without that, the corresponding bit in intel_iommu.domain_ids doesn't get cleared and repeated VM domain creation and destruction will run out of domain IDs. Meanwhile we still can't call iommu_detach_domain() on arbitrary non-VM domains or we risk clearing in-use domain IDs, as 71684406905f attempted to address. It's tempting to modify iommu_detach_domain() to test the domain iommu_bmp, but the call ordering from domain_remove_one_dev_info() prevents it being able to work as fb170fb4c548 seems to have intended. Caching of unused VM domains on the iommu object seems to be the root of the problem, but this code is far too fragile for that kind of rework to be proposed for stable, so we simply revert this chunk to its state prior to fb170fb4c548. Fixes: fb170fb4c548 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability") Fixes: 71684406905f ("iommu/vt-d: Detach domain *only* from attached iommus") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by: Joerg Roedel <jroedel@suse.de> 23 July 2015, 12:17:39 UTC
0da029e Paolo Bonzini 23 July 2015, 06:24:42 UTC KVM: x86: rename quirk constants to KVM_X86_QUIRK_* Make them clearly architecture-dependent; the capability is valid for all architectures, but the argument is not. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 23 July 2015, 06:24:42 UTC
fb27995 Xiao Guangrong 15 July 2015, 19:25:56 UTC KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED OVMF depends on WB to boot fast, because it only clears caches after it has set up MTRRs---which is too late. Let's do writeback if CR0.CD is set to make it happy, similar to what SVM is already doing. Signed-off-by: Xiao Guangrong <guangrong.xiao@intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 23 July 2015, 06:23:01 UTC
41dbc6b Paolo Bonzini 23 July 2015, 06:22:45 UTC KVM: x86: introduce kvm_check_has_quirk The logic of the disabled_quirks field usually results in a double negation. Wrap it in a simple function that checks the bit and negates it. Based on a patch from Xiao Guangrong. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 23 July 2015, 06:22:45 UTC
3e5d2fd Xiao Guangrong 15 July 2015, 19:25:55 UTC KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type kvm_mtrr_get_guest_memory_type never returns -1 which is implied in the current code since if @type = -1 (means no MTRR contains the range), iter.partial_map must be true Simplify the code to indicate this fact Signed-off-by: Xiao Guangrong <guangrong.xiao@intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 23 July 2015, 06:21:48 UTC
10dc331 Xiao Guangrong 15 July 2015, 19:25:54 UTC KVM: MTRR: fix memory type handling if MTRR is completely disabled Currently code uses default memory type if MTRR is fully disabled, fix it by using UC instead. Signed-off-by: Xiao Guangrong <guangrong.xiao@intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 23 July 2015, 06:21:33 UTC
154322f Tomas Winkler 18 June 2015, 08:41:03 UTC mei: prevent unloading mei hw modules while the device is opened. chrdev_open() increases reference counter on cdev->owner. Instead of assigning the owner to mei subsystem, the owner has to be set to the underlaying HW module (mei_me or mei_txe), so once the device is opened the HW module cannot be unloaded. Cc: <stable@vger.kernel.org> #3.17+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 04:31:05 UTC
a634443 Sudeep Dutt 22 July 2015, 18:50:10 UTC misc: mic: scif bug fix for vmalloc_to_page crash v4.2-rc1 enabled huge page support for ioremap(..). Calling vmalloc_to_page after v4.2-rc1 results in the crash shown below on the host upon booting X100 coprocessors: BUG: unable to handle kernel paging request at ffffc47c00000000 IP: [<ffffffff811a2c0c>] vmalloc_to_page+0x6c/0xb0 This patch fixes this crash by obtaining the fake struct page pointer which is required to be passed into dma_map_sg(..) by calling pfn_to_page(..) instead of vmalloc_to_page(..). Link: https://lkml.org/lkml/2015/7/18/110 Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Suggested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 04:25:36 UTC
68d35c7 Sudip Mukherjee 15 June 2015, 14:35:51 UTC parport: fix freeing freed memory After the reference count becomes 0 when put_device() is called, it will execute the release callback where we are freeing all the allocated memory associated with the device. So if we just continue on the error path then we are again freeing devname and trying to dereference par_dev which has already been free-ed in the release callback. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 04:15:49 UTC
23c4059 Sudip Mukherjee 15 June 2015, 14:35:50 UTC parport: fix memory leak After the reference count becomes 0 when put_device() is called, it will execute the release callback where we are freeing all the allocated memory associated with the device. We missed freeing par_dev->state. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 04:15:49 UTC
cabea69 Sudip Mukherjee 15 June 2015, 14:35:49 UTC parport: fix error handling After registering the device if exclusive access fails for any reason then we need to unregister the device to remove all references. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2015, 04:15:49 UTC
back to top