https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
74d3329 Linux 4.2-rc5 03 August 2015, 01:34:55 UTC
d08c318 Merge tag 'powerpc-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - TCE table memory calculation fix from Alexey - Build fix for ans-lcd from Luis - Unbalanced IRQ warning fix from Alistair * tag 'powerpc-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/eeh-powernv: Fix unbalanced IRQ warning macintosh/ans-lcd: fix build failure after module_init/exit relocation powerpc/powernv/ioda2: Fix calculation for memory allocated for TCE table 03 August 2015, 01:07:36 UTC
27667f4 i915: temporary fix for DP MST docking station NULL pointer dereference Ted Ts'o reports that his Lenovo T540p ThinkPad crashes at boot if attached to the docking station. This is a regression that he was able to bisect to commit 8c7b5ccb7298: "drm/i915: Use atomic helpers for computing changed flags:" The reason seems to be the new call to drm_atomic_helper_check_modeset() added to intel_modeset_compute_config(), which in turn calls update_connector_routing(), and somehow ends up picking a NULL crtc for the connector state, causing the subsequent drm_crtc_index() to OOPS. Daniel Vetter says that the fundamental issue seems to be confusion in the encoder selection, and this isn't the right fix, but while he chases down the proper fix, this at least avoids the NULL pointer dereference and makes Ted's docking station work again. Reported-bisected-and-tested-by: Theodore Ts'o <tytso@mit.edu> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Mani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 August 2015, 18:02:16 UTC
d4edea4 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of three fixes for the ipr driver and one fairly major one for memory leaks in the mq path of SCSI" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fix memory leak with scsi-mq ipr: Fix invalid array indexing for HRRQ ipr: Fix incorrect trace indexing ipr: Fix locking for unit attention handling 02 August 2015, 16:36:21 UTC
30c7b56 Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Things are calming down nicely here w.r.t. fixes. This batch includes two week's worth since I missed to send before -rc4. Nothing particularly scary to point out, smaller fixes here and there. Shortlog describes it pretty well" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: keystone: fix dt bindings to use post div register for mainpll ARM: nomadik: disable UART0 on Nomadik boards ARM: dts: i.MX35: Fix can support. ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc ARM: dts: add CPU OPP and regulator supply property for exynos4210 ARM: dts: Update video-phy node with syscon phandle for exynos3250 ARM: DRA7: hwmod: fix gpmc hwmod 02 August 2015, 16:12:46 UTC
0118360 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS fix from Al Viro: "Spurious ENOTDIR fix" This should fix the problems reported by Dominique Martinet and Hugh Dickins. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: link_path_walk(): be careful when failing with ENOTDIR 02 August 2015, 00:42:14 UTC
97242f9 link_path_walk(): be careful when failing with ENOTDIR In RCU mode we might end up with dentry evicted just we check that it's a directory. In such case we should return ECHILD rather than ENOTDIR, so that pathwalk would be retries in non-RCU mode. Breakage had been introduced in commit b18825a - prior to that we were looking at nd->inode, which had been fetched before verifying that ->d_seq was still valid. That form of check would only be satisfied if at some point the pathname prefix would indeed have resolved to a non-directory. The fix consists of checking ->d_seq after we'd run into a non-directory dentry, and failing with ECHILD in case of mismatch. Note that all branches since 3.12 have that problem... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 02 August 2015, 00:18:38 UTC
3f6d9e0 Merge tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "We had a regression due to reuse of descriptor so we have reverted that. The rest are driver fixes: - at_hdmac and at_xdmac for residue, trannfer width, and channel config - pl330 final fix for dma fails and overflow issue - xgene resouce map fix - mv_xor big endian op fix" * tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma: Revert "dmaengine: virt-dma: don't always free descriptor upon completion" dmaengine: mv_xor: fix big endian operation in register mode dmaengine: xgene-dma: Fix the resource map to handle overlapping dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg() dmaengine: at_hdmac: fix residue computation dmaengine: at_xdmac: fix bug about channel configuration dmaengine: pl330: Really fix choppy sound because of wrong residue calculation dmaengine: pl330: Fix overflow when reporting residue in memcpy 01 August 2015, 19:47:04 UTC
3270c8e Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixlets from Thomas Gleixner: "Just two updates to the maintainers file" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Appoint Jiang and Marc as irqdomain maintainers MAINTAINERS: Appoint Marc Zyngier as irqchips co-maintainer 01 August 2015, 16:47:11 UTC
51d2e09 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fallout from the recent NMI fixes: make x86 LDT handling more robust. Also some EFI fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Make modify_ldt synchronous x86/xen: Probe target addresses in set_aliased_prot() before the hypercall x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() efi: Check for NULL efi kernel parameters x86/efi: Use all 64 bit of efi_memmap in setup_e820() 01 August 2015, 16:16:33 UTC
7c764ce Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Must teardown SR-IOV before unregistering netdev in igb driver, from Alex Williamson. 2) Fix ipv6 route unreachable crash in IPVS, from Alex Gartrell. 3) Default route selection in ipv4 should take the prefix length, table ID, and TOS into account, from Julian Anastasov. 4) sch_plug must have a reset method in order to purge all buffered packets when the qdisc is reset, likewise for sch_choke, from WANG Cong. 5) Fix deadlock and races in slave_changelink/br_setport in bridging. From Nikolay Aleksandrov. 6) mlx4 bug fixes (wrong index in port even propagation to VFs, overzealous BUG_ON assertion, etc.) from Ido Shamay, Jack Morgenstein, and Or Gerlitz. 7) Turn off klog message about SCTP userspace interface compat that makes no sense at all, from Daniel Borkmann. 8) Fix unbounded restarts of inet frag eviction process, causing NMI watchdog soft lockup messages, from Florian Westphal. 9) Suspend/resume fixes for r8152 from Hayes Wang. 10) Fix busy loop when MSG_WAITALL|MSG_PEEK is used in TCP recv, from Sabrina Dubroca. 11) Fix performance regression when removing a lot of routes from the ipv4 routing tables, from Alexander Duyck. 12) Fix device leak in AF_PACKET, from Lars Westerhoff. 13) AF_PACKET also has a header length comparison bug due to signedness, from Alexander Drozdov. 14) Fix bug in EBPF tail call generation on x86, from Daniel Borkmann. 15) Memory leaks, TSO stats, watchdog timeout and other fixes to thunderx driver from Sunil Goutham and Thanneeru Srinivasulu. 16) act_bpf can leak memory when replacing programs, from Daniel Borkmann. 17) WOL packet fixes in gianfar driver, from Claudiu Manoil. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) stmmac: fix missing MODULE_LICENSE in stmmac_platform gianfar: Enable device wakeup when appropriate gianfar: Fix suspend/resume for wol magic packet gianfar: Fix warning when CONFIG_PM off act_pedit: check binding before calling tcf_hash_release() net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket net: sched: fix refcount imbalance in actions r8152: reset device when tx timeout r8152: add pre_reset and post_reset qlcnic: Fix corruption while copying act_bpf: fix memory leaks when replacing bpf programs net: thunderx: Fix for crash while BGX teardown net: thunderx: Add PCI driver shutdown routine net: thunderx: Fix crash when changing rss with mutliple traffic flows net: thunderx: Set watchdog timeout value net: thunderx: Wakeup TXQ only if CQE_TX are processed net: thunderx: Suppress alloc_pages() failure warnings net: thunderx: Fix TSO packet statistic net: thunderx: Fix memory leak when changing queue count net: thunderx: Fix RQ_DROP miscalculation ... 01 August 2015, 00:10:56 UTC
acea568 Merge branch 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Filipe fixed up a hard to trigger ENOSPC regression from our merge window pull, and we have a few other smaller fixes" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix quick exhaustion of the system array in the superblock btrfs: its btrfs_err() instead of btrfs_error() btrfs: Avoid NULL pointer dereference of free_extent_buffer when read_tree_block() fail btrfs: Fix lockdep warning of btrfs_run_delayed_iputs() 01 August 2015, 00:05:37 UTC
c6fd4fc Merge tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became a relative big update as it includes the collected ASoC fixes. There are a few fixes in ASoC core side, mostly for DAPM and the new topology API. The rest are various ASoC driver-specific fixes, as well as the usual HD-audio and USB-audio quirks" * tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits) ALSA: hda - Fix MacBook Pro 5,2 quirk ALSA: hda - Fix race between PM ops and HDA init/probe ALSA: usb-audio: add dB range mapping for some devices ALSA: hda - Apply a fixup to Dell Vostro 5480 ALSA: hda - Add pin quirk for the headset mic jack detection on Dell laptop ALSA: hda - Apply fixup for another Toshiba Satellite S50D ALSA: fireworks: add support for AudioFire2 quirk ALSA: hda - Fix the headset mic that will not work on Dell desktop machine ALSA: hda - fix cs4210_spdif_automute() ASoC: pcm1681: Fix setting de-emphasis sampling rate selection ASoC: ssm4567: Keep TDM_BCLKS in ssm4567_set_dai_fmt ASoC: sgtl5000: Fix up define for SGTL5000_SMALL_POP ASoC: dapm: Don't add prefix to widget stream name ASoC: rt5645: Check if codec is initialized in workqueue handler ASoC: Intel: Get correct usage_count value to load firmware ASoC: topology: Fix to add dapm mixer info ASoC: zx: spdif: Fix devm_ioremap_resource return value check ASoC: zx: i2s: Fix devm_ioremap_resource return value check ASoC: mediatek: Use platform_of_node for machine drivers ASoC: Free card DAPM context on snd_soc_instantiate_card() error path ... 01 August 2015, 00:00:25 UTC
ea11154 stmmac: fix missing MODULE_LICENSE in stmmac_platform Commit 50649ab14982 ("stmmac: drop driver from stmmac platform code") was a bit overzealous in removing code and dropped the MODULE_* macro's that are still needed since stmmac_platform can be a module. Fix this by putting the macro's remvoed in 50649ab14982 back. This fixes the following errors when used as a module: stmmac_platform: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint stmmac_platform: Unknown symbol devm_kmalloc (err 0) stmmac_platform: Unknown symbol stmmac_suspend (err 0) stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) stmmac_platform: Unknown symbol platform_get_resource (err 0) stmmac_platform: Unknown symbol of_get_phy_mode (err 0) stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) stmmac_platform: Unknown symbol of_alias_get_id (err 0) stmmac_platform: Unknown symbol stmmac_resume (err 0) stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) Fixes: 50649ab14982 ("stmmac: drop driver from stmmac platform code") Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 July 2015, 22:44:24 UTC
ef1f436 Merge branch 'gianfar-wol-fixes' Claudiu Manoil says: ==================== gianfar: wol magic packet fixes These changes were already validated as part of FSL SDK. Patch 2 fixes occasional wake-on magic packet failures during traffic, probably due to incorrect traffic stop/ device halt sequence and incorrect usage of txlock. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 31 July 2015, 22:41:50 UTC
b0734b6 gianfar: Enable device wakeup when appropriate The wol_en flag is 0 by default anyway, and we have the following inconsistency: a MAGIC packet wol capable eth interface is registered as a wake-up source but unable to wake-up the system as wol_en is 0 (wake-on flag set to 'd'). Calling set_wakeup_enable() at netdev open is just redundant because wol_en is 0 by default. Let only ethtool call set_wakeup_enable() for now. The bflock is obviously obsoleted, its utility has been corroded over time. The bitfield flags used today in gianfar are accessed only on the init/ config path, with no real possibility of concurrency - nothing that would justify smth. like bflock. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 July 2015, 22:41:49 UTC
614b424 gianfar: Fix suspend/resume for wol magic packet If we disable NAPI in the first place we can mask the device's interrupts (and halt it) without fearing that imask may be concurrently accessed from interrupt context, so there's no need to do local_irq_save() around gfar_halt_nodisable(). lock_rx_qs()/unlock_tx_qs() are just obsoleted and potentially buggy routines. The txlock is currently used in the driver only to manage TX congestion, it has nothing to do with halting the device. With these changes, the TX processing is stopped before gfar_halt(). Compact gfar_halt() is used instead of gfar_halt_nodisable(), as it disables Rx/TX DMA h/w blocks and the Rx/TX h/w queues. gfar_start() re-enables all these blocks on resume. Enabling the magic-packet mode remains the same, note that the RX block is re-enabled just before entering sleep mode. Add IRQF_NO_SUSPEND flag for the error interrupt line, to signal that the interrupt line must remain active during sleep in order to wake the system by magic packet (MAG) reception interrupt. (On some systems the MAG interrupt did trigger w/o this flag as well, but on others it didn't.) Without these fixes, when suspended during fair Tx traffic the interface occasionally failed to be woken up by magic packet. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 July 2015, 22:41:49 UTC
8486830 gianfar: Fix warning when CONFIG_PM off CC drivers/net/ethernet/freescale/gianfar.o drivers/net/ethernet/freescale/gianfar.c:568:13: warning: 'lock_tx_qs' defined but not used [-Wunused-function] static void lock_tx_qs(struct gfar_private *priv) ^ drivers/net/ethernet/freescale/gianfar.c:576:13: warning: 'unlock_tx_qs' defined but not used [-Wunused-function] static void unlock_tx_qs(struct gfar_private *priv) ^ Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 July 2015, 22:41:49 UTC
5175f71 act_pedit: check binding before calling tcf_hash_release() When we share an action within a filter, the bind refcnt should increase, therefore we should not call tcf_hash_release(). Fixes: 1a29321ed045 ("net_sched: act: Dont increment refcnt on replace") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 31 July 2015, 22:22:34 UTC
c1bfa98 ARM: dts: keystone: fix dt bindings to use post div register for mainpll All of the keystone devices have a separate register to hold post divider value for main pll clock. Currently the fixed-postdiv value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to use a value of 2 for this. Now that we have fixed this in the pll clock driver change the dt bindings for the same. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> 31 July 2015, 20:30:11 UTC
5e49e0b Merge tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "These fixes are all for the AMD IOMMU driver: - A regression with HSA caused by the conversion of the driver to default domains. The fixes make sure that an HSA device can still be attached to an IOMMUv2 domain and that these domains also allow non-IOMMUv2 capable devices. - Fix iommu=pt mode which did not work because the dma_ops where set to nommu_ops, which breaks devices that can only do 32bit DMA. - Fix an issue with non-PCI devices not working, because there are no dma_ops for them. This issue was discovered recently as new AMD x86 platforms have non-PCI devices too" * tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Allow non-ATS devices in IOMMUv2 domains iommu/amd: Set global dma_ops if swiotlb is disabled iommu/amd: Use swiotlb in passthrough mode iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domains iommu/amd: Use iommu core for passthrough mode iommu/amd: Use iommu_attach_group() 31 July 2015, 19:34:10 UTC
23ff9e1 Merge tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel Pull drm intel fixes from Daniel Vetter: "I delayed my -fixes pull a bit hoping that I could include a fix for the dp mst stuff but looks a bit more nasty than that. So just 3 other regression fixes, one 4.2 other two cc: stable" * tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel: drm/i915: Declare the swizzling unknown for L-shaped configurations drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt drm/i915: Replace WARN inside I915_READ64_2x32 with retry loop 31 July 2015, 19:11:01 UTC
fd56d1d Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "This has a bunch of nouveau fixes, as Ben has been hibernating and has lots of small fixes for lots of bugs across nouveau. Radeon has one major fix for hdmi/dp audio regression that is larger than Alex would like, but seems to fix up a fair few bugs, along with some misc fixes. And a few msm fixes, one of which is also a bit large. But nothing in here seems insane or crazy for this stage, just more than I'd like" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits) drm/msm/mdp5: release SMB (shared memory blocks) in various cases drm/msm: change to uninterruptible wait in atomic commit drm/msm: mdp4: Fix drm_framebuffer dereference crash drm/msm: fix msm_gem_prime_get_sg_table() drm/amdgpu: add new parameter to seperate map and unmap drm/amdgpu: hdp_flush is not needed for inside IB drm/amdgpu: different emit_ib for gfx and compute drm/amdgpu: information leak in amdgpu_info_ioctl() drm/amdgpu: clean up init sequence for failures drm/radeon/combios: add some validation of lvds values drm/radeon: rework audio modeset to handle non-audio hdmi features drm/radeon: rework audio detect (v4) drm/amdgpu: Drop drm/ prefix for including drm.h in amdgpu_drm.h drm/radeon: Drop drm/ prefix for including drm.h in radeon_drm.h drm/nouveau/nouveau/ttm: fix tiled system memory with Maxwell drm/nouveau/kms/nv50-: guard against enabling cursor on disabled heads drm/nouveau/fbcon/g80: reduce PUSH_SPACE alloc, fire ring on accel init drm/nouveau/fbcon/gf100-: reduce RING_SPACE allocation drm/nouveau/fbcon/nv11-: correctly account for ring space usage drm/nouveau/bios: add proper support for opcode 0x59 ... 31 July 2015, 19:05:02 UTC
8c8fe97 Revert "dmaengine: virt-dma: don't always free descriptor upon completion" This reverts commit b9855f03d560d351e95301b9de0bc3cad3b31fe9. The patch break existing DMA usage case. For example, audio SOC dmaengine never release channel and cause virt-dma to cache too much memory in descriptor to exhaust system memory. Signed-off-by: Vinod Koul <vinod.koul@intel.com> 31 July 2015, 15:03:43 UTC
0ec9ebc dmaengine: mv_xor: fix big endian operation in register mode Commit 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") introduced the support for a feature that appeared in Armada 38x: specifying the operation to be performed in a per-descriptor basis rather than globally per channel. However, when doing so, it changed the function mv_chan_set_mode() to use: if (IS_ENABLED(__BIG_ENDIAN)) instead of: #if defined(__BIG_ENDIAN) While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Consequently, the commit broke support for big-endian, as the XOR_DESCRIPTOR_SWAP flag was not set in the XOR channel configuration register. The primarily visible effect was some nasty warnings and failures appearing during the self-test of the XOR unit: [ 1.197368] mv_xor d0060900.xor: error on chan 0. intr cause 0x00000082 [ 1.197393] mv_xor d0060900.xor: config 0x00008440 [ 1.197410] mv_xor d0060900.xor: activation 0x00000000 [ 1.197427] mv_xor d0060900.xor: intr cause 0x00000082 [ 1.197443] mv_xor d0060900.xor: intr mask 0x000003f7 [ 1.197460] mv_xor d0060900.xor: error cause 0x00000000 [ 1.197477] mv_xor d0060900.xor: error addr 0x00000000 [ 1.197491] ------------[ cut here ]------------ [ 1.197513] WARNING: CPU: 0 PID: 1 at ../drivers/dma/mv_xor.c:664 mv_xor_interrupt_handler+0x14c/0x170() See also: http://storage.kernelci.org/next/next-20150617/arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y/lab-khilman/boot-armada-xp-openblocks-ax3-4.txt Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 31 July 2015, 15:03:43 UTC
cda8e93 dmaengine: xgene-dma: Fix the resource map to handle overlapping There is an overlap in dma ring cmd csr region due to sharing of ethernet ring cmd csr region. This patch fix the resource overlapping by mapping the entire dma ring cmd csr region. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 31 July 2015, 15:03:43 UTC
1c8a38b dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg() This patch adds the missing update of the transfer data width in at_xdmac_prep_slave_sg(). Indeed, for each item in the scatter-gather list, we check whether the transfer length is aligned with the data width provided by dmaengine_slave_config(). If so, we directly use this data width for the current part of the transfer we are preparing. Otherwise, the data width is reduced to 8 bits (1 byte). Of course, the actual number of register accesses must also be updated to match the new data width. So one chunk was missing in the original patch (see Fixes tag below): the number of register accesses was correctly set to (len >> fixed_dwidth) in mbr_ubc but the real data width was not updated in mbr_cfg. Since mbr_cfg may change for each part of the scatter-gather transfer this also explains why the original patch used the Descriptor View 2 instead of the Descriptor View 1. Let's take the example of a DMA transfer to write 8bit data into an Atmel USART with FIFOs. When FIFOs are enabled in the USART, its Transmit Holding Register (THR) works in multidata mode, that is to say that up to 4 8bit data can be written into the THR in a single 32bit access and it is still possible to write only one data with a 8bit access. To take advantage of this new feature, the DMA driver was modified to allow multiple dwidths when doing slave transfers. For instance, when the total length is 22 bytes, the USART driver splits the transfer into 2 parts: First part: 20 bytes transferred through 5 32bit writes into THR Second part: 2 bytes transferred though 2 8bit writes into THR For the second part, the data width was first set to 4_BYTES by the USART driver thanks to dmaengine_slave_config() then at_xdmac_prep_slave_sg() reduces this data width to 1_BYTE because the 2 byte length is not aligned with the original 4_BYTES data width. Since the data width is modified, the actual number of writes into THR must be set accordingly. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 6d3a7d9e3ada ("dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers") Cc: stable@vger.kernel.org #4.0 and later Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 31 July 2015, 15:03:42 UTC
93dce3a dmaengine: at_hdmac: fix residue computation As claimed by the programmer datasheet and confirmed by the IP designer, the Block Transfer Size (BTSIZE) bitfield of the Channel x Control A Register (CTRLAx) always refers to a number of Source Width (SRC_WIDTH) transfers. Both the SRC_WIDTH and BTSIZE bitfields can be extacted from the CTRLAx register to compute the DMA residue. So the 'tx_width' field is useless and can be removed from the struct at_desc. Before this patch, atc_prep_slave_sg() was not consistent: BTSIZE was correctly initialized according to the SRC_WIDTH but 'tx_width' was always set to reg_width, which was incorrect for MEM_TO_DEV transfers. It led to bad DMA residue when 'tx_width' != SRC_WIDTH. Also the 'tx_width' field was mostly set only in the first and last descriptors. Depending on the kind of DMA transfer, this field remained uninitialized for intermediate descriptors. The accurate DMA residue was computed only when the currently processed descriptor was the first or the last of the chain. This algorithm was a little bit odd. An accurate DMA residue can always be computed using the SRC_WIDTH and BTSIZE bitfields in the CTRLAx register. Finally, the test to check whether the currently processed descriptor is the last of the chain was wrong: for cyclic transfer, last_desc->lli.dscr is NOT equal to zero, since set_desc_eol() is never called, but logically equal to first_desc->txd.phys. This bug has a side effect on the drivers/tty/serial/atmel_serial.c driver, which uses cyclic DMA transfer to receive data. Since the DMA residue was wrong each time the DMA transfer reaches the second (and last) period of the transfer, no more data were received by the USART driver till the cyclic DMA transfer loops back to the first period. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Torsten Fleischer <torfl6749@gmail.com> Tested-by: Jirí Prchal <jiri.prchal@aksignal.cz> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 31 July 2015, 15:03:42 UTC
20cadcb dmaengine: at_xdmac: fix bug about channel configuration When using descriptor view 2 or higher, we don't write the configuration into AT_XDMAC_CC register because this configuration will be fetch from the descriptor. Unfortunately, the PROT bit is not updated with this method, we have to do it manually before enabling the channel. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 31 July 2015, 15:03:41 UTC
1c1cc45 iommu/amd: Allow non-ATS devices in IOMMUv2 domains With the grouping of multi-function devices a non-ATS capable device might also end up in the same domain as an IOMMUv2 capable device. So handle this situation gracefully and don't consider it a bug anymore. Tested-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 31 July 2015, 13:15:41 UTC
37868fe x86/ldt: Make modify_ldt synchronous modify_ldt() has questionable locking and does not synchronize threads. Improve it: redesign the locking and synchronize all threads' LDTs using an IPI on all modifications. This will dramatically slow down modify_ldt in multithreaded programs, but there shouldn't be any multithreaded programs that care about modify_ldt's performance in the first place. This fixes some fallout from the CVE-2015-5157 fixes. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: <stable@vger.kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/4c6978476782160600471bd865b318db34c7b628.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 July 2015, 08:23:23 UTC
aa1acff x86/xen: Probe target addresses in set_aliased_prot() before the hypercall The update_va_mapping hypercall can fail if the VA isn't present in the guest's page tables. Under certain loads, this can result in an OOPS when the target address is in unpopulated vmap space. While we're at it, add comments to help explain what's going on. This isn't a great long-term fix. This code should probably be changed to use something like set_memory_ro. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <dvrabel@cantab.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: <stable@vger.kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 July 2015, 08:23:22 UTC
1adb912 Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: * Fix an EFI boot issue preventing a Parallels virtual machine from booting because the upper 32-bits of the EFI memmap pointer were being discarded in setup_e820(). (Dmitry Skorodumov) * Validate that the "efi" kernel parameter gets used with an argument, otherwise we will oops. (Ricardo Neri) Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 July 2015, 07:55:26 UTC
8400935 Merge tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "There are a couple of recently found, long standing remote attribute corruption fixes caused by log recovery getting confused after a crash, and the new DAX code in XFS (merged in 4.2-rc1) needs to actually use the DAX fault path on read faults. Summary: - remote attribute log recovery corruption fixes - DAX page faults need to use direct mappings, not a page cache mapping" * tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: remote attributes need to be considered data xfs: remote attribute headers contain an invalid LSN xfs: call dax_fault on read page faults for DAX 31 July 2015, 03:36:49 UTC
8a68173 net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket The newsk returned by sk_clone_lock should hold a get_net() reference if, and only if, the parent is not a kernel socket (making this similar to sk_alloc()). E.g,. for the SYN_RECV path, tcp_v4_syn_recv_sock->..inet_csk_clone_lock sets up the syn_recv newsk from sk_clone_lock. When the parent (listen) socket is a kernel socket (defined in sk_alloc() as having sk_net_refcnt == 0), then the newsk should also have a 0 sk_net_refcnt and should not hold a get_net() reference. Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Acked-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 22:59:12 UTC
28e6b67 net: sched: fix refcount imbalance in actions Since commit 55334a5db5cd ("net_sched: act: refuse to remove bound action outside"), we end up with a wrong reference count for a tc action. Test case 1: FOO="1,6 0 0 4294967295," BAR="1,6 0 0 4294967294," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \ action bpf bytecode "$FOO" tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 1 bind 1 tc actions replace action bpf bytecode "$BAR" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 1 ref 2 bind 1 tc actions replace action bpf bytecode "$FOO" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 3 bind 1 Test case 2: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 2 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 3 bind 1 What happens is that in tcf_hash_check(), we check tcf_common for a given index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've found an existing action. Now there are the following cases: 1) We do a late binding of an action. In that case, we leave the tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init() handler. This is correctly handeled. 2) We replace the given action, or we try to add one without replacing and find out that the action at a specific index already exists (thus, we go out with error in that case). In case of 2), we have to undo the reference count increase from tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to do so because of the 'tcfc_bindcnt > 0' check which bails out early with an -EPERM error. Now, while commit 55334a5db5cd prevents 'tc actions del action ...' on an already classifier-bound action to drop the reference count (which could then become negative, wrap around etc), this restriction only accounts for invocations outside a specific action's ->init() handler. One possible solution would be to add a flag thus we possibly trigger the -EPERM ony in situations where it is indeed relevant. After the patch, above test cases have correct reference count again. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 21:20:39 UTC
990c9b3 Merge branch 'r8152-fixes' Hayes Wang says: ==================== r8152: device reset v3: For patch #2, remove cancel_delayed_work(). v2: For patch #1, remove usb_autopm_get_interface(), usb_autopm_put_interface(), and the checking of intf->condition. For patch #2, replace the original method with usb_queue_reset_device() to reset the device. v1: Although the driver works normally, we find the device may get all 0xff data when transmitting packets on certain platforms. It would break the device and no packet could be transmitted. The reset is necessary to recover the hw for this situation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 21:03:46 UTC
37608f3 r8152: reset device when tx timeout The device reset is necessary if the hw becomes abnormal and stops transmitting packets. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 21:03:46 UTC
e501139 r8152: add pre_reset and post_reset Add rtl8152_pre_reset() and rtl8152_post_reset() which are used when calling usb_reset_device(). The two functions could reduce the time of reset when calling usb_reset_device() after probe(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 21:03:46 UTC
649ccd0 ALSA: hda - Fix MacBook Pro 5,2 quirk MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this seems not working correctly, a fix for pin NID 0x15 is needed in addition. It's equivalent with the fixup for MacBook Air 1,1, so use this instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102131 Reported-and-tested-by: Jeffery Miller <jefferym@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 30 July 2015, 20:30:29 UTC
b09dec2 MAINTAINERS: Appoint Jiang and Marc as irqdomain maintainers Ben was pretty surprised that he is still listed as the maintainer and he has no objections against transferring the duty to those who rumaged in and revamped that code in the recent past. Add kernel/irq/msi.c to the affected files as it's part of the shiny new hierarchical irqdomain machinery. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> 30 July 2015, 19:43:51 UTC
54d9ffc MAINTAINERS: Appoint Marc Zyngier as irqchips co-maintainer Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> 30 July 2015, 19:43:51 UTC
646c4b7 x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") introduced a regression which causes malfunction of interrupt lines. The reason is that the conversion of mp_check_pin_attr() missed to update the polarity selection of the interrupt pin with the caller provided setting and instead uses a stale attribute value. That in turn results in chosing the wrong interrupt flow handler. Use the caller supplied setting to configure the pin correctly which also choses the correct interrupt flow handler. This restores the original behaviour and on the affected machine/driver (Surface Pro 3, i2c controller) all IOAPIC IRQ configuration are identical to v4.1. Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Reported-and-tested-by: Matt Fleming <matt@codeblueprint.co.uk> Reported-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Yu <yu.c.chen@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1438242695-23531-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 30 July 2015, 19:15:29 UTC
dbe0811 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is support for keyboards and touchpads found in 2015 editions of Macbooks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: zforce - don't overwrite the stack" Input: bcm5974 - add support for the 2015 Macbook Pro HID: apple: Add support for the 2015 Macbook Pro Input: bcm5974 - prepare for a new trackpad generation Input: synaptics - dump ext10 capabilities as well 30 July 2015, 18:03:04 UTC
0c958ec scsi: fix memory leak with scsi-mq Fix a memory leak with scsi-mq triggered by commands with large data transfer length. __sg_alloc_table() sets both table->nents and table->orig_nents to the same value. When the scatterlist is DMA-mapped, table->nents is overwritten with the (possibly smaller) size of the DMA-mapped scatterlist, while table->orig_nents retains the original size of the allocated scatterlist. scsi_free_sgtable() should therefore check orig_nents instead of nents, and all code that initializes sdb->table without calling __sg_alloc_table() should set both nents and orig_nents. Fixes: d285203cf647 ("scsi: add support for a blk-mq based I/O path.") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> 30 July 2015, 17:40:33 UTC
3f1c058 ipr: Fix invalid array indexing for HRRQ Fixes another signed / unsigned array indexing bug in the ipr driver. Currently, when hrrq_index wraps, it becomes a negative number. We do the modulo, but still have a negative number, so we end up indexing backwards in the array. Given where the hrrq array is located in memory, we probably won't actually reference memory we don't own, but nonetheless ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as struct ipr_hrr_queue data, so bad things could certainly happen. Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new adapters. Let's take an example: Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4: The atomic_add_return will then return -1. We mod this with 3 and get -2, add one and get -1 for an array index. On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter initialization and error interrupts so that we can optimize the other queues for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the I/O requests across those HRRQs. With the default module parameter settings, this bug won't hit, only when someone sets the ipr.number_of_msix parameter to a value larger than 3 is when bad things start to happen. Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> 30 July 2015, 17:38:47 UTC
bb7c543 ipr: Fix incorrect trace indexing When ipr's internal driver trace was changed to an atomic, a signed/unsigned bug slipped in which results in us indexing backwards in our memory buffer writing on memory that does not belong to us. This patch fixes this by removing the modulo and instead just mask off the low bits. Cc: <stable@vger.kernel.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> 30 July 2015, 17:38:00 UTC
36b8e18 ipr: Fix locking for unit attention handling Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes a crash seen as the __devices list in the scsi host was changing as we were iterating through it. Cc: <stable@vger.kernel.org> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> 30 July 2015, 17:36:21 UTC
9115c75 efi: Check for NULL efi kernel parameters Even though it is documented how to specifiy efi parameters, it is possible to cause a kernel panic due to a dereference of a NULL pointer when parsing such parameters if "efi" alone is given: PANIC: early exception 0e rip 10:ffffffff812fb361 error 0 cr2 0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc1+ #450 [ 0.000000] ffffffff81fe20a9 ffffffff81e03d50 ffffffff8184bb0f 00000000000003f8 [ 0.000000] 0000000000000000 ffffffff81e03e08 ffffffff81f371a1 64656c62616e6520 [ 0.000000] 0000000000000069 000000000000005f 0000000000000000 0000000000000000 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8184bb0f>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff81f371a1>] early_idt_handler_common+0x81/0xae [ 0.000000] [<ffffffff812fb361>] ? parse_option_str+0x11/0x90 [ 0.000000] [<ffffffff81f4dd69>] arch_parse_efi_cmdline+0x15/0x42 [ 0.000000] [<ffffffff81f376e1>] do_early_param+0x50/0x8a [ 0.000000] [<ffffffff8106b1b3>] parse_args+0x1e3/0x400 [ 0.000000] [<ffffffff81f37a43>] parse_early_options+0x24/0x28 [ 0.000000] [<ffffffff81f37691>] ? loglevel+0x31/0x31 [ 0.000000] [<ffffffff81f37a78>] parse_early_param+0x31/0x3d [ 0.000000] [<ffffffff81f3ae98>] setup_arch+0x2de/0xc08 [ 0.000000] [<ffffffff8109629a>] ? vprintk_default+0x1a/0x20 [ 0.000000] [<ffffffff81f37b20>] start_kernel+0x90/0x423 [ 0.000000] [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef [ 0.000000] RIP 0xffffffff81ba2efc This panic is not reproducible with "efi=" as this will result in a non-NULL zero-length string. Thus, verify that the pointer to the parameter string is not NULL. This is consistent with other parameter-parsing functions which check for NULL pointers. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> 30 July 2015, 17:07:11 UTC
7cc03e4 x86/efi: Use all 64 bit of efi_memmap in setup_e820() The efi_info structure stores low 32 bits of memory map in efi_memmap and high 32 bits in efi_memmap_hi. While constructing pointer in the setup_e820(), need to take into account all 64 bit of the pointer. It is because on 64bit machine the function efi_get_memory_map() may return full 64bit pointer and before the patch that pointer was truncated. The issue is triggered on Parallles virtual machine and fixed with this patch. Signed-off-by: Dmitry Skorodumov <sdmitry@parallels.com> Cc: Denis V. Lunev <den@openvz.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> 30 July 2015, 17:07:10 UTC
0a55205 Merge tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two patches headed for -stable. nct7802: Fix integer overflow seen when writing voltage limits nct7904: Rename pwm attributes to match hwmon ABI" * tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct7802) Fix integer overflow seen when writing voltage limits hwmon: (nct7904) Rename pwm attributes to match hwmon ABI 30 July 2015, 15:04:19 UTC
5eb3e5a drm/i915: Declare the swizzling unknown for L-shaped configurations The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle. Note that this is a new attempt for the previously merged one, reverted in commit d82c0ba6e306f079407f07003e53c262d683397b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 14 12:29:27 2015 +0200 Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" This is cc: stable since we need it to fix up troubles with wc cpu mmaps that userspace recently started to use widely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org [danvet: Add note about previous (failed attempt).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 30 July 2015, 14:51:20 UTC
d0e30ad drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt If the device does not support the aliasing ppgtt, we must translate user bind requests (PIN_USER) from LOCAL_BIND to a GLOBAL_BIND. However, since this is device specific we cannot do this conveniently in the upper layers and so must manage the vma->bound flags in the backend. Partial revert of commit 75d04a3773ecee617847de963ae4195d6aa74c28 [4.2-rc1] Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound Note this was spotted by Daniel originally, but we dropped the ball in getting the fix in before the bug going wild. Sorry all. Reported-by: Vincent Legoll vincent.legoll@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91133 References: https://bugs.freedesktop.org/show_bug.cgi?id=90224 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 30 July 2015, 14:45:30 UTC
b8d65e9 powerpc/eeh-powernv: Fix unbalanced IRQ warning pnv_eeh_next_error() re-enables the eeh opal event interrupt but it gets called from a loop if there are more outstanding events to process, resulting in a warning due to enabling an already enabled interrupt. Instead the interrupt should only be re-enabled once the last outstanding event has been processed. Tested-by: Daniel Axtens <dja@axtens.net> Reported-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 30 July 2015, 09:01:32 UTC
5271782 iommu/amd: Set global dma_ops if swiotlb is disabled Some AMD systems also have non-PCI devices which can do DMA. Those can't be handled by the AMD IOMMU, as the hardware can only handle PCI. These devices would end up with no dma_ops, as neither the per-device nor the global dma_ops will get set. SWIOTLB provides global dma_ops when it is active, so make sure there are global dma_ops too when swiotlb is disabled. Signed-off-by: Joerg Roedel <jroedel@suse.de> 30 July 2015, 08:28:48 UTC
3230232 iommu/amd: Use swiotlb in passthrough mode In passthrough mode (iommu=pt) all devices are identity mapped. If a device does not support 64bit DMA it might still need remapping. Make sure swiotlb is initialized to provide this remapping. Signed-off-by: Joerg Roedel <jroedel@suse.de> 30 July 2015, 08:28:48 UTC
02ca202 iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domains Since devices with IOMMUv2 functionality might be in the same group as devices without it, allow those devices in IOMMUv2 domains too. Otherwise attaching the group with the IOMMUv2 device to the domain will fail. Signed-off-by: Joerg Roedel <jroedel@suse.de> 30 July 2015, 08:28:48 UTC
1e6a7b0 iommu/amd: Use iommu core for passthrough mode Remove the AMD IOMMU driver implementation for passthrough mode and rely on the new iommu core features for that. Signed-off-by: Joerg Roedel <jroedel@suse.de> 30 July 2015, 08:28:48 UTC
55c99a4 iommu/amd: Use iommu_attach_group() Since the conversion to default domains the iommu_attach_device function only works for devices with their own group. But this isn't always true for current IOMMUv2 capable devices, so use iommu_attach_group instead. Signed-off-by: Joerg Roedel <jroedel@suse.de> 30 July 2015, 08:28:48 UTC
15f1bb1 qlcnic: Fix corruption while copying Use proper typecasting while performing byte-by-byte copy Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:57:26 UTC
f4eaed2 act_bpf: fix memory leaks when replacing bpf programs We currently trigger multiple memory leaks when replacing bpf actions, besides others: comm "tc", pid 1909, jiffies 4294851310 (age 1602.796s) hex dump (first 32 bytes): 01 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 ................ 18 b0 98 6d 00 88 ff ff 00 00 00 00 00 00 00 00 ...m............ backtrace: [<ffffffff817e623e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8120a22d>] __vmalloc_node_range+0x1bd/0x2c0 [<ffffffff8120a37a>] __vmalloc+0x4a/0x50 [<ffffffff811a8d0a>] bpf_prog_alloc+0x3a/0xa0 [<ffffffff816c0684>] bpf_prog_create+0x44/0xa0 [<ffffffffa09ba4eb>] tcf_bpf_init+0x28b/0x3c0 [act_bpf] [<ffffffff816d7001>] tcf_action_init_1+0x191/0x1b0 [<ffffffff816d70a2>] tcf_action_init+0x82/0xf0 [<ffffffff816d4d12>] tcf_exts_validate+0xb2/0xc0 [<ffffffffa09b5838>] cls_bpf_modify_existing+0x98/0x340 [cls_bpf] [<ffffffffa09b5cd6>] cls_bpf_change+0x1a6/0x274 [cls_bpf] [<ffffffff816d56e5>] tc_ctl_tfilter+0x335/0x910 [<ffffffff816b9145>] rtnetlink_rcv_msg+0x95/0x240 [<ffffffff816df34f>] netlink_rcv_skb+0xaf/0xc0 [<ffffffff816b909e>] rtnetlink_rcv+0x2e/0x40 [<ffffffff816deaaf>] netlink_unicast+0xef/0x1b0 Issue is that the old content from tcf_bpf is allocated and needs to be released when we replace it. We seem to do that since the beginning of act_bpf on the filter and insns, later on the name as well. Example test case, after patch: # FOO="1,6 0 0 4294967295," # BAR="1,6 0 0 4294967294," # tc actions add action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$BAR" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions del action bpf index 2 [...] # echo "scan" > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak | grep "comm \"tc\"" | wc -l 0 Fixes: d23b8ad8ab23 ("tc: add BPF based action") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:56:22 UTC
f68b123 Merge branch 'thunderx-fixes' Aleksey Makarov says: ==================== net: thunderx: Misc fixes Miscellaneous fixes for the ThunderX VNIC driver All the patches can be applied individually. It's ok to drop some if the maintainer feels uncomfortable with applying for 4.2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:32 UTC
60f83c8 net: thunderx: Fix for crash while BGX teardown Cortina phy does not have kernel driver and we don't attach device with phy layer for intefaces like XFI, XLAUI etc, Hence check for interface type before calling disconnect. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:32 UTC
4adf435 net: thunderx: Add PCI driver shutdown routine Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:32 UTC
b49087d net: thunderx: Fix crash when changing rss with mutliple traffic flows This fixes a crash when changing rss with multiple traffic flows. While interface teardown, disable tx queues after all NAPI threads are done. If done otherwise tx queues might be woken up inside NAPI if any CQE_TX are processed. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:32 UTC
3d7a8aa net: thunderx: Set watchdog timeout value If a txq (SQ) remains in stopped state after this timeout its considered as stuck and interface is reinited. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:32 UTC
74840b8 net: thunderx: Wakeup TXQ only if CQE_TX are processed Previously TXQ is wakedup whenever napi is executed and irrespective of if any CQE_TX are processed or not. Added 'txq_stop' and 'txq_wake' counters to aid in debugging if there are any future issues. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:31 UTC
f8ce966 net: thunderx: Suppress alloc_pages() failure warnings Suppressing standard alloc_pages() warnings. Some kernel configs limit alloc size and the network driver may fail. Do not drop a kernel warning in this case, instead just drop a oneliner that the network driver could not be loaded since the buffer could not be allocated. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:31 UTC
2cb468e net: thunderx: Fix TSO packet statistic Fixing TSO packages not being counted. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:31 UTC
c62cd3c net: thunderx: Fix memory leak when changing queue count Fix for memory leak when changing queue/channel count via ethtool Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:31 UTC
32c1b96 net: thunderx: Fix RQ_DROP miscalculation With earlier configured value sufficient number of CQEs are not being reserved for transmitted packets. Hence under heavy incoming traffic load, receive notifications will take away most of the CQ thus transmit notifications will be lost resulting in tx skbs not being freed. Finally SQ will be full and it will be stopped, watchdog timer will kick in. After this fix receive notifications will not take morethan half of CQ reserving the rest for transmit notifications. Also changed CQ & SQ sizes from 16k to 4k. This is also due to the receive notifications taking first half of CQ under heavy load and time taken by NAPI to clear transmit notifications will increase with higher queue sizes. Again results in SQ being stopped. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:31 UTC
143ceb0 net: thunderx: Fix memory leak while tearing down interface Fixed 'tso_hdrs' memory not being freed properly. Also fixed SQ skbuff maintenance issues. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:30 UTC
4b561c1 net: thunderx: Fix data integrity issues with LDWB Switching back to LDD transactions from LDWB. While transmitting packets out with LDWB transactions data integrity issues are seen very frequently. hence switching back to LDD. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:52:30 UTC
c8507fb ipv6: flush nd cache on IFF_NOARP change This patch is the IPv6 equivalent of commit 6c8b4e3ff81b ("arp: flush arp cache on IFF_NOARP change") Without it, we keep buggy neighbours in the cache, with destination MAC address equal to our own MAC address. Tested: tcpdump -i eth0 -s 0 ip6 -n -e & ip link set dev eth0 arp off ping6 remote // sends buggy frames ip link set dev eth0 arp on ping6 remote // should work once kernel is patched Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Mario Fanelli <mariofanelli@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 06:01:39 UTC
9200bc4 hwmon: (nct7802) Fix integer overflow seen when writing voltage limits Writing a large value into a voltage limit attribute can result in an overflow due to an auto-conversion from unsigned long to unsigned int. Cc: Constantine Shulyupin <const@MakeLinux.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Guenter Roeck <linux@roeck-us.net> 30 July 2015, 03:06:50 UTC
0d6aaff hwmon: (nct7904) Rename pwm attributes to match hwmon ABI pwm attributes have well defined names, which should be used. Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> Cc: stable@vger.kernel.org #v4.1+ Signed-off-by: Guenter Roeck <linux@roeck-us.net> 30 July 2015, 03:06:46 UTC
bdce3e7 Merge branch 'msm-fixes-4.2' of git://people.freedesktop.org/~robclark/linux into drm-fixes Fix for nasty crash on mdp4 in disable path, fix for dma-buf export, smb leak on mdp5 which could result in intermittent modeset fails, and don't let interrupted system call disturb atomic commit once we are past the point of no return. * 'msm-fixes-4.2' of git://people.freedesktop.org/~robclark/linux: drm/msm/mdp5: release SMB (shared memory blocks) in various cases drm/msm: change to uninterruptible wait in atomic commit drm/msm: mdp4: Fix drm_framebuffer dereference crash drm/msm: fix msm_gem_prime_get_sg_table() 30 July 2015, 02:41:44 UTC
d698291 Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Radeon and amdgpu fixes for 4.2. The audio fix ended up being more invasive than I would have liked, but this should finally fix up the last of the regressions since DP audio support was added. * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: add new parameter to seperate map and unmap drm/amdgpu: hdp_flush is not needed for inside IB drm/amdgpu: different emit_ib for gfx and compute drm/amdgpu: information leak in amdgpu_info_ioctl() drm/amdgpu: clean up init sequence for failures drm/radeon/combios: add some validation of lvds values drm/radeon: rework audio modeset to handle non-audio hdmi features drm/radeon: rework audio detect (v4) drm/amdgpu: Drop drm/ prefix for including drm.h in amdgpu_drm.h drm/radeon: Drop drm/ prefix for including drm.h in radeon_drm.h 30 July 2015, 02:40:27 UTC
b2428f9 Merge branch 'netcp-fixes' Murali Karicheri says: ==================== net: netcp: bug fixes for dynamic module support This series fixes few bugs to allow keystone netcp modules to be dynamically loaded and removed. Currently it allows following sequence multiple times insmod cpsw_ale.ko insmod davinci_mdio.ko insmod keystone_netcp.ko insmod keystone_netcp_ethss.ko ifup eth0 ifup eth1 ping <hosts on eth0> ping <hosts on eth1> ifdown eth1 ifdown eth0 rmmod keystone_netcp_ethss.ko rmmod keystone_netcp.ko rmmod davinci_mdio.ko rmmod cpsw_ale.ko ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 01:37:41 UTC
31a184b net: netcp: ethss: cleanup gbe_probe() and gbe_remove() functions This patch clean up error handle code to use goto label properly. In some cases, the code unnecessarily use goto instead of just returning the error code. Code also make explicit calls to devm_* APIs on error which is not necessary. In the gbe_remove() also it makes similar calls which is also unnecessary. Also fix few checkpatch warnings Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 01:37:41 UTC
c20afae net: netcp: ethss: fix up incorrect use of list api The code seems to assume a null is returned when the list is empty from first_sec_slave() to break the loop which is incorrect. Fix the code by using list_empty(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 01:37:40 UTC
01a0309 net: netcp: fix cleanup interface list in netcp_remove() Currently if user do rmmod keystone_netcp.ko following warning is seen :- [ 59.035891] ------------[ cut here ]------------ [ 59.040535] WARNING: CPU: 2 PID: 1619 at drivers/net/ethernet/ti/ netcp_core.c:2127 netcp_remove) This is because the interface list is not cleaned up in netcp_remove. This patch fixes this. Also fix some checkpatch related warnings. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 01:37:40 UTC
d41a83b Merge tag 'pm+acpi-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These fix three regressions, two recent ones (cpufreq core and ACPI device power management) and one introduced during the 4.1 cycle (intel_pstate). Specifics: - Fix a recently introduced issue in the cpufreq core causing it to attempt to create duplicate symbolic links to the policy directory in sysfs for CPUs that are offline when the cpufreq driver is being registered (Rafael J Wysocki) - Fix a recently introduced problem in the ACPI device power management core code causing it to store an incorrect value in the device object's power.state field in some cases which in turn leads to attempts to turn power resources off while they should still be on going forward (Mika Westerberg) - Fix an intel_pstate driver issue introduced during the 4.1 cycle which leads to kernel panics on boot on Knights Landing chips due to incomplete support for them in that driver (Lukasz Anaczkowski)" * tag 'pm+acpi-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Avoid attempts to create duplicate symbolic links ACPI / PM: Use target_state to set the device power state intel_pstate: Add get_scaling cpu_defaults param to Knights Landing 30 July 2015, 01:14:48 UTC
d0db3a3 Merge tag 'dm-4.2-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - fix DM thinp to consistently return -ENOSPC when out of data space - fix a logic bug in the DM cache smq policy's creation error path - revert a DM cache 4.2-rc3 change that reduced writeback efficiency - fix a hang on DM cache device destruction due to improper prealloc_used accounting introduced in 4.2-rc3 - update URL for dm-crypt wiki page * tag 'dm-4.2-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix device destroy hang due to improper prealloc_used accounting Revert "dm cache: do not wake_worker() in free_migration()" dm crypt: update wiki page URL dm cache policy smq: fix alloc_bitset check that always evaluates as false dm thin: return -ENOSPC when erroring retry list due to out of data space 30 July 2015, 01:08:48 UTC
2482abb ebpf, x86: fix general protection fault when tail call is invoked With eBPF JIT compiler enabled on x86_64, I was able to reliably trigger the following general protection fault out of an eBPF program with a simple tail call, f.e. tracex5 (or a stripped down version of it): [ 927.097918] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [...] [ 927.100870] task: ffff8801f228b780 ti: ffff880016a64000 task.ti: ffff880016a64000 [ 927.102096] RIP: 0010:[<ffffffffa002440d>] [<ffffffffa002440d>] 0xffffffffa002440d [ 927.103390] RSP: 0018:ffff880016a67a68 EFLAGS: 00010006 [ 927.104683] RAX: 5a5a5a5a5a5a5a5a RBX: 0000000000000000 RCX: 0000000000000001 [ 927.105921] RDX: 0000000000000000 RSI: ffff88014e438000 RDI: ffff880016a67e00 [ 927.107137] RBP: ffff880016a67c90 R08: 0000000000000000 R09: 0000000000000001 [ 927.108351] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880016a67e00 [ 927.109567] R13: 0000000000000000 R14: ffff88026500e460 R15: ffff880220a81520 [ 927.110787] FS: 00007fe7d5c1f740(0000) GS:ffff880265000000(0000) knlGS:0000000000000000 [ 927.112021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 927.113255] CR2: 0000003e7bbb91a0 CR3: 000000006e04b000 CR4: 00000000001407e0 [ 927.114500] Stack: [ 927.115737] ffffc90008cdb000 ffff880016a67e00 ffff88026500e460 ffff880220a81520 [ 927.117005] 0000000100000000 000000000000001b ffff880016a67aa8 ffffffff8106c548 [ 927.118276] 00007ffcdaf22e58 0000000000000000 0000000000000000 ffff880016a67ff0 [ 927.119543] Call Trace: [ 927.120797] [<ffffffff8106c548>] ? lookup_address+0x28/0x30 [ 927.122058] [<ffffffff8113d176>] ? __module_text_address+0x16/0x70 [ 927.123314] [<ffffffff8117bf0e>] ? is_ftrace_trampoline+0x3e/0x70 [ 927.124562] [<ffffffff810c1a0f>] ? __kernel_text_address+0x5f/0x80 [ 927.125806] [<ffffffff8102086f>] ? print_context_stack+0x7f/0xf0 [ 927.127033] [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050 [ 927.128254] [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050 [ 927.129461] [<ffffffff8119edfa>] ? trace_call_bpf+0x3a/0x140 [ 927.130654] [<ffffffff8119ee4a>] trace_call_bpf+0x8a/0x140 [ 927.131837] [<ffffffff8119edfa>] ? trace_call_bpf+0x3a/0x140 [ 927.133015] [<ffffffff8119f008>] kprobe_perf_func+0x28/0x220 [ 927.134195] [<ffffffff811a1668>] kprobe_dispatcher+0x38/0x60 [ 927.135367] [<ffffffff81174b91>] ? seccomp_phase1+0x1/0x230 [ 927.136523] [<ffffffff81061400>] kprobe_ftrace_handler+0xf0/0x150 [ 927.137666] [<ffffffff81174b95>] ? seccomp_phase1+0x5/0x230 [ 927.138802] [<ffffffff8117950c>] ftrace_ops_recurs_func+0x5c/0xb0 [ 927.139934] [<ffffffffa022b0d5>] 0xffffffffa022b0d5 [ 927.141066] [<ffffffff81174b91>] ? seccomp_phase1+0x1/0x230 [ 927.142199] [<ffffffff81174b95>] seccomp_phase1+0x5/0x230 [ 927.143323] [<ffffffff8102c0a4>] syscall_trace_enter_phase1+0xc4/0x150 [ 927.144450] [<ffffffff81174b95>] ? seccomp_phase1+0x5/0x230 [ 927.145572] [<ffffffff8102c0a4>] ? syscall_trace_enter_phase1+0xc4/0x150 [ 927.146666] [<ffffffff817f9a9f>] tracesys+0xd/0x44 [ 927.147723] Code: 48 8b 46 10 48 39 d0 76 2c 8b 85 fc fd ff ff 83 f8 20 77 21 83 c0 01 89 85 fc fd ff ff 48 8d 44 d6 80 48 8b 00 48 83 f8 00 74 0a <48> 8b 40 20 48 83 c0 33 ff e0 48 89 d8 48 8b 9d d8 fd ff ff 4c [ 927.150046] RIP [<ffffffffa002440d>] 0xffffffffa002440d The code section with the instructions that traps points into the eBPF JIT image of the root program (the one invoking the tail call instruction). Using bpf_jit_disasm -o on the eBPF root program image: [...] 4e: mov -0x204(%rbp),%eax 8b 85 fc fd ff ff 54: cmp $0x20,%eax <--- if (tail_call_cnt > MAX_TAIL_CALL_CNT) 83 f8 20 57: ja 0x000000000000007a 77 21 59: add $0x1,%eax <--- tail_call_cnt++ 83 c0 01 5c: mov %eax,-0x204(%rbp) 89 85 fc fd ff ff 62: lea -0x80(%rsi,%rdx,8),%rax <--- prog = array->prog[index] 48 8d 44 d6 80 67: mov (%rax),%rax 48 8b 00 6a: cmp $0x0,%rax <--- check for NULL 48 83 f8 00 6e: je 0x000000000000007a 74 0a 70: mov 0x20(%rax),%rax <--- GPF triggered here! fetch of bpf_func 48 8b 40 20 [ matches <48> 8b 40 20 ... from above ] 74: add $0x33,%rax <--- prologue skip of new prog 48 83 c0 33 78: jmpq *%rax <--- jump to new prog insns ff e0 [...] The problem is that rax has 5a5a5a5a5a5a5a5a, which suggests a tail call jump to map slot 0 is pointing to a poisoned page. The issue is the following: lea instruction has a wrong offset, i.e. it should be ... lea 0x80(%rsi,%rdx,8),%rax ... but it actually seems to be ... lea -0x80(%rsi,%rdx,8),%rax ... where 0x80 is offsetof(struct bpf_array, prog), thus the offset needs to be positive instead of negative. Disassembling the interpreter, we btw similarly do: [...] c88: lea 0x80(%rax,%rdx,8),%rax <--- prog = array->prog[index] 48 8d 84 d0 80 00 00 00 c90: add $0x1,%r13d 41 83 c5 01 c94: mov (%rax),%rax 48 8b 00 [...] Now the other interesting fact is that this panic triggers only when things like CONFIG_LOCKDEP are being used. In that case offsetof(struct bpf_array, prog) starts at offset 0x80 and in non-CONFIG_LOCKDEP case at offset 0x50. Reason is that the work_struct inside struct bpf_map grows by 48 bytes in my case due to the lockdep_map member (which also has CONFIG_LOCK_STAT enabled members). Changing the emitter to always use the 4 byte displacement in the lea instruction fixes the panic on my side. It increases the tail call instruction emission by 3 more byte, but it should cover us from various combinations (and perhaps other future increases on related structures). After patch, disassembly: [...] 9e: lea 0x80(%rsi,%rdx,8),%rax <--- CONFIG_LOCKDEP/CONFIG_LOCK_STAT 48 8d 84 d6 80 00 00 00 a6: mov (%rax),%rax 48 8b 00 [...] [...] 9e: lea 0x50(%rsi,%rdx,8),%rax <--- No CONFIG_LOCKDEP 48 8d 84 d6 50 00 00 00 a6: mov (%rax),%rax 48 8b 00 [...] Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 July 2015, 00:02:19 UTC
7ae90a4 bridge: mdb: fix delmdb state in the notification Since mdb states were introduced when deleting an entry the state was left as it was set in the delete request from the user which leads to the following output when doing a monitor (for example): $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 temp ^^^ Note the "temp" state in the delete notification which is wrong since the entry was permanent, the state in a delete is always reported as "temp" regardless of the real state of the entry. After this patch: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent There's one important note to make here that the state is actually not matched when doing a delete, so one can delete a permanent entry by stating "temp" in the end of the command, I've chosen this fix in order not to break user-space tools which rely on this (incorrect) behaviour. So to give an example after this patch and using the wrong state: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 permanent (monitor) dev br0 port eth3 grp 239.0.0.1 permanent $ bridge mdb del dev br0 port eth3 grp 239.0.0.1 temp (monitor) dev br0 port eth3 grp 239.0.0.1 permanent Note the state of the entry that got deleted is correct in the notification. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: David S. Miller <davem@davemloft.net> 29 July 2015, 22:02:30 UTC
544586f bridge: mcast: give fast leave precedence over multicast router and querier When fast leave is configured on a bridge port and an IGMP leave is received for a group, the group is not deleted immediately if there is a router detected or if multicast querier is configured. Ideally the group should be deleted immediately when fast leave is configured. Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 July 2015, 21:57:05 UTC
b4cba04 drm/msm/mdp5: release SMB (shared memory blocks) in various cases Release all blocks after the pipe is disabled, even when vsync didn't happen in some error cases. Allow requesting SMB multiple times before configuring to hardware, by releasing blocks not programmed to hardware yet for shrinking case. This fixes a potential leak of shared memory pool blocks. Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> 29 July 2015, 20:38:24 UTC
99fc1bc drm/msm: change to uninterruptible wait in atomic commit The atomic commit cannot easily undo and return an error once the state is swapped. Change to uninterruptible wait, and ignore the timeout error. Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> 29 July 2015, 20:38:24 UTC
a1c3e3e drm/msm: mdp4: Fix drm_framebuffer dereference crash mdp4_get_frame_format() can dereference a drm_framebuffer when it's NULL. Call it in mdp4_plane_mode_set only when we know fb is non-NULL. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> 29 July 2015, 20:38:24 UTC
ac45146 drm/msm: fix msm_gem_prime_get_sg_table() We need to return a new sgt, since the caller takes ownership of it. Reported-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Rob Clark <robdclark@gmail.com> 29 July 2015, 20:38:24 UTC
194a336 drm/amdgpu: add new parameter to seperate map and unmap Signed-off-by: monk.liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> 29 July 2015, 20:06:45 UTC
e722b71 drm/amdgpu: hdp_flush is not needed for inside IB hdp flush is not needed for IBs that dispatched from kernel inside because there is no video memory host access Signed-off-by: monk.liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> 29 July 2015, 20:06:17 UTC
9332313 drm/amdgpu: different emit_ib for gfx and compute compute ring didn't use const engine byfar, so ignore CE things in compute routine Signed-off-by: monk.liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> 29 July 2015, 20:05:57 UTC
c193fa9 drm/amdgpu: information leak in amdgpu_info_ioctl() We recently changed the drm_amdgpu_info_device struct so now there is a 4 byte hole at the end. We need to initialize it so we don't disclose secret information from the stack. Fixes: fa92754e9c47 ('drm/amdgpu: add VCE harvesting instance query') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 29 July 2015, 19:50:37 UTC
8faf0e0 drm/amdgpu: clean up init sequence for failures If we fail during device init, record what state each block is in so that we can tear down clearly. Fixes various problems on device init failure. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 29 July 2015, 19:50:36 UTC
0a90a0c drm/radeon/combios: add some validation of lvds values Fixes a broken hsync start value uncovered by: abc0b1447d4974963548777a5ba4a4457c82c426 (drm: Perform basic sanity checks on probed modes) The driver handled the bad hsync start elsewhere, but the above commit prevented it from getting added. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91401 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 29 July 2015, 19:50:36 UTC
7726e72 drm/radeon: rework audio modeset to handle non-audio hdmi features Need to setup the deep color and avi packets regardless of audio setup. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 29 July 2015, 19:50:28 UTC
d0ea397 drm/radeon: rework audio detect (v4) 1. Always assign audio function pointers even if the display does not support audio. We need to properly disable the audio stream when when using a non-audio capable monitor. Fixes purple line on some hdmi monitors. 2. Check if a pin is in use by another encoder before disabling it. v2: make sure we've fetched the edid before checking audio and look up the encoder before calling audio_detect since connector->encoder may not be assigned yet. Separate pin and afmt. They are allocated at different times and have no dependency on eachother. v3: fix connector fetching in encoder functions v4: fix missed dig->pin check in dce6_afmt_write_latency_fields bugs: https://bugzilla.kernel.org/show_bug.cgi?id=93701 https://bugzilla.redhat.com/show_bug.cgi?id=1236337 https://bugs.freedesktop.org/show_bug.cgi?id=91041 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 29 July 2015, 19:48:05 UTC
b3fcf36 drm/amdgpu: Drop drm/ prefix for including drm.h in amdgpu_drm.h This allows amdgpu_drm.h to be reused verbatim in libdrm. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> 29 July 2015, 19:48:05 UTC
back to top