https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
afd2ff9 Linux 4.4 10 January 2016, 23:01:32 UTC
eac6f76 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for machines with pages > 4k (PPC mostly). There's a bug in our optimal transfer size code where we don't account for pages > 4k and can set the transfer size to be less than the page size causing nasty failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Reject optimal transfer length smaller than page size 09 January 2016, 22:53:48 UTC
c0cb139 Merge tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixlet from Bjorn Helgaas: "This marks the TI DRA7xx host bridge driver as broken. Apparently it has never worked without some additional out-of-tree code, so I'm going to mark it broken now and remove it completely next cycle unless it's fixed" * tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dra7xx: Mark driver as broken 09 January 2016, 22:44:44 UTC
751e5f5 vmstat: allocate vmstat_wq before it is used kernel test robot has reported the following crash: BUG: unable to handle kernel NULL pointer dereference at 00000100 IP: [<c1074df6>] __queue_work+0x26/0x390 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53 Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1 Workqueue: events vmstat_shepherd task: cb684600 ti: cb7ba000 task.ti: cb7ba000 EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0 EIP is at __queue_work+0x26/0x390 EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0 Stack: Call Trace: __queue_delayed_work+0xa1/0x160 queue_delayed_work_on+0x36/0x60 vmstat_shepherd+0xad/0xf0 process_one_work+0x1aa/0x4c0 worker_thread+0x41/0x440 kthread+0xb0/0xd0 ret_from_kernel_thread+0x21/0x40 The reason is that start_shepherd_timer schedules the shepherd work item which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates that workqueue so if the further initialization takes more than HZ we might end up scheduling on a NULL vmstat_wq. This is really unlikely but not impossible. Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 January 2016, 07:47:54 UTC
44d8a7d Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is the final small set of ARM SoC bug fixes for linux-4.4, almost all regressions: OMAP: - data corruption on the Nokia N900 flash Allwinner: - Two defconfig change to get USB working again ARM Versatile: - Interrupt numbers gone bad after an older bug fix Nomadik: - Crashes from incorrect L2 cache settings VIA vt8500: - SD/MMC support on WM8650 never worked" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: dts: vt8500: Add SDHC node to DTS file for WM8650 ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices ARM: versatile: fix MMC/SD interrupt assignment ARM: nomadik: set latencies to 8 cycles ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption ARM: Fix broken USB support in sunxi_defconfig 09 January 2016, 00:11:05 UTC
516c50c Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fix from Paolo Bonzini: "A simple fix. I'm sending it before the merge window, because it refines a patch found in your master branch but not yet in the kvm/next branch that is destined for 4.5" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: only channel 0 of the i8254 is linked to the HPET 08 January 2016, 23:58:14 UTC
496b0b5 Merge tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Just one obvious fix that adds a missing function argument in ACPI code introduced recently (Kees Cook)" * tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / property: avoid leaking format string into kobject name 08 January 2016, 23:50:59 UTC
650e545 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A handful of x86 fixes: - a syscall ABI fix, fixing an Android breakage - a Xen PV guest fix relating to the RTC device, causing a non-working console - a Xen guest syscall stack frame fix - an MCE hotplug CPU crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/numachip: Fix NumaConnect2 MMCFG PCI access x86/entry: Restore traditional SYSENTER calling convention x86/entry: Fix some comments x86/paravirt: Prevent rtc_cmos platform device init on PV guests x86/xen: Avoid fast syscall path for Xen PV guests x86/mce: Ensure offline CPUs don't participate in rendezvous process 08 January 2016, 23:21:48 UTC
de03017 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc scheduler fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Reset task's lockless wake-queues on fork() sched/core: Fix unserialized r-m-w scribbling stuff sched/core: Check tgid in is_global_init() sched/fair: Fix multiplication overflow on 32-bit systems 08 January 2016, 21:57:13 UTC
3ab6d1e Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two core subsystem fixes, plus a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix race in swevent hash perf: Fix race in perf_event_exec() perf list: Robustify event printing routine perf list: Add support for PERF_COUNT_SW_BPF_OUT perf hists browser: Fix segfault if use symbol filter in cmdline perf hists browser: Reset selection when refresh perf hists browser: Add NULL pointer check to prevent crash perf buildid-list: Fix return value of perf buildid-list -k perf buildid-list: Show running kernel build id fix 08 January 2016, 21:52:59 UTC
ea83ae2 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fixes a core IRQ subsystem deadlock" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent chip buslock deadlock 08 January 2016, 21:46:59 UTC
a6a7358 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block revert from Jens Axboe: "The previous pull request had a split fix for NVMe, however there are corner cases where that ends up blowing up. So let's revert it for 4.4. The regression isn't introduced in this cycle, and it's "just" a performance regression, not a stability/integrity issue" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "block: Split bios on chunk boundaries" 08 January 2016, 21:39:09 UTC
212c7f6 Merge tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Late fixes for 4.4 are three fixes for drivers which include a revert of mic-x100 fix which is causing regression, xgene fix for double IRQ and async_tx fix to use GFP_NOWAIT" * tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag async_tx: use GFP_NOWAIT rather than GFP_IO dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock" 08 January 2016, 20:23:00 UTC
436950a Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6 08 January 2016, 20:18:45 UTC
4054f64 Merge tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A slightly higher volume than a new year's wish, but not too worrisome: a large LOC is only for HD-audio device-specific quirks, so fairly safe to apply. The rest ASoC fixes are all trivial and small; a simple replacement of mutex call with nested lock version, a few Arizona and Realtek codec fixes, and a regression fix for Skylake firmware handling" * tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Intel: Skylake: Fix the memory leak ASoC: Intel: Skylake: Revert previous broken fix memory leak fix ASoC: Use nested lock for snd_soc_dapm_mutex_lock ASoC: rt5645: add sys clk detection ALSA: hda - Add keycode map for alc input device ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz 08 January 2016, 19:52:18 UTC
841bcd2 Merge tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "urgent onenand file system corruption fix for n900" from Tony Lindgren: Last minute urgent pull request to prevent file system corruption on Nokia N900. Looks like we have a GPMC bus timing bug that has gone unnoticed because of bootloader configured registers until few days ago. We are not detecting the onenand clock rate properly unless we have CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption that can be easily be reproduced. There seems to be also an additional bug still lurking around for onenand corruption. But that is still being investigated and it does not seem to be GPMC timings related. Meanwhile, it would be good to get this fix into v4.4 to prevent wrong timings from corrupting onenand. * tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption 08 January 2016, 16:46:45 UTC
6126eb2 Revert "block: Split bios on chunk boundaries" This reverts commit d3805611130af9b911e908af9f67a3f64f4f0914. If we end up splitting on the first segment, we don't adjust the sector count. That results in hitting a BUG() with attempting to split 0 sectors. As this is just a performance issue and not a regression since 4.3 release, let's just rever this change. That gives us more time to test a real fix for 4.5, which would be marked for stable anyway. 08 January 2016, 16:00:29 UTC
5c3b99d PCI: dra7xx: Mark driver as broken Mark the dra7xx PCI host driver as broken. This driver was first merged in v3.17 and has never worked. Although the driver compiles just fine, it is missing an essential device reset. If the driver is included, the kernel locks up hard shortly after booting, before any console output appears. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 08 January 2016, 15:58:31 UTC
ff4319d firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6 The dmi_ver wasn't updated correctly before the dmi_decode method run to save the uuid. That resulted in "dmidecode -s system-uuid" and /sys/class/dmi/id/product_uuid disagreeing. The latter was buggy and this fixes it. Reported-by: Federico Simoncelli <fsimonce@redhat.com> Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> 08 January 2016, 08:00:54 UTC
9db22d9 ACPI / property: avoid leaking format string into kobject name The dn->name is expected to be used as a literal, so add the missing "%s". Fixes: 263b4c1a64bc (ACPI / property: Expose data-only subnodes via sysfs) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 08 January 2016, 00:01:41 UTC
02006f7 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm nouveau fix from Dave Airlie: "Still not back to work, but I decided to forward this fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gr/nv40: fix oops in interrupt handler 07 January 2016, 21:06:35 UTC
1d8b0e7 Merge tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Two build issues, one in the ipmmu-vmsa driver and one for the new generic dma-api implemention used on arm64 - A performance fix for said dma-api implemention - An issue caused by a wrong offset in map_sg in the same code as above * tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Use correct offset in map_sg iommu/ipmmu-vmsa: Don't truncate ttbr if LPAE is not enabled iommu/dma: Avoid unlikely high-order allocations iommu/dma: Add some missing #includes 07 January 2016, 20:56:23 UTC
2626820 Merge tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "PeiyangX Qiu reported that if a module fails to load between calling ftrace_module_init() and do_init_module() that the allocations made in ftrace_module_init() will not be freed, resulting in a memory leak. The solution is to call ftrace_release_mod() on the failing module in the fail path befor do_init_module() is called. This will remove any allocations made for that module, and nothing if ftrace_module_init() wasn't called yet for that module. Note, once do_init_module() is called, the MODULE_GOING notifiers are called for the failed module, which calls into the ftrace code to do the proper clean up (basically calling ftrace_release_mod())" * tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/module: Call clean up function when module init fails early 07 January 2016, 20:42:22 UTC
049fb9b ftrace/module: Call clean up function when module init fails early If the module init code fails after calling ftrace_module_init() and before calling do_init_module(), we can suffer from a memory leak. This is because ftrace_module_init() allocates pages to store the locations that ftrace hooks are placed in the module text. If do_init_module() fails, it still calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of the pages it allocated for the module. But if load_module() fails before then, the pages allocated by ftrace_module_init() will never be freed. Call ftrace_release_mod() on the module if load_module() fails before getting to do_init_module(). Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com> Fixes: a949ae560a511 "ftrace/module: Hardcode ftrace_module_init() call into load_module()" Cc: stable@vger.kernel.org # v2.6.38+ Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 07 January 2016, 17:17:39 UTC
0f090bf dts: vt8500: Add SDHC node to DTS file for WM8650 Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver is already in the kernel, this node enables the controller support for WM8650 Signed-off-by: Roman Volkov <rvolkov@v1ros.org> Reviewed-by: Alexey Charkov <alchark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 07 January 2016, 15:02:53 UTC
5b1a618 ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to multi_v7_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to multi_v7_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 07 January 2016, 15:02:19 UTC
e5e57e7 kvm: x86: only channel 0 of the i8254 is linked to the HPET While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by: P J P <pjp@fedoraproject.org> Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 07 January 2016, 12:50:38 UTC
164afb1 iommu/dma: Use correct offset in map_sg When mapping a non-page-aligned scatterlist entry, we copy the original offset to the output DMA address before aligning it to hand off to iommu_map_sg(), then later adding the IOVA page address portion to get the final mapped address. However, when the IOVA page size is smaller than the CPU page size, it is the offset within the IOVA page we want, not that within the CPU page, which can easily be larger than an IOVA page and thus result in an incorrect final address. Fix the bug by taking only the IOVA-aligned part of the offset as the basis of the DMA address, not the whole thing. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 07 January 2016, 12:36:41 UTC
3bea6a4 Merge branch 'linux-4.4' of git://github.com/skeggsb/linux into drm-fixes single nv40 oops fix. * 'linux-4.4' of git://github.com/skeggsb/linux: drm/nouveau/gr/nv40: fix oops in interrupt handler 07 January 2016, 07:18:45 UTC
b0b7902 dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag For interrupt controller that doesn't support irq_disable and hardware with level interrupt, an extra interrupt can be pending. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line. Reference: http://git.kernel.org/tip/e9849777d0e27cdd2902805be51da73e7c79578c Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 07 January 2016, 05:39:36 UTC
b02bab6 async_tx: use GFP_NOWAIT rather than GFP_IO These async_XX functions are called from md/raid5 in an atomic section, between get_cpu() and put_cpu(), so they must not sleep. So use GFP_NOWAIT rather than GFP_IO. Dan Williams writes: Longer term async_tx needs to be merged into md directly as we can allocate this unmap data statically per-stripe rather than per request. Fixed: 7476bd79fc01 ("async_pq: convert to dmaengine_unmap_data") Cc: stable@vger.kernel.org (v3.13+) Reported-and-tested-by: Stanislav Samsonov <slava@annapurnalabs.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 07 January 2016, 05:36:18 UTC
20f1275 ARM: versatile: fix MMC/SD interrupt assignment Commit 0976c946a610d06e907335b7a3afa6db046f8e1b "arm/versatile: Fix versatile irq specifications" has an off-by-one error on the Versatile AB that has been regressing the Versatile AB hardware for some time. However it seems like the interrupt assignments have never been correct and I have now adjusted them according to the specification. The masks for the valid interrupts made it impossible to assign the right SIC interrupt for the MMCI, so I went in and fixed these to correspond to the specifications, and added references if anyone wants to double-check. Due to the Versatile PB including the Versatile AB as a base DTS file, we need to override and correct some values to correspond to the actual changes in the hardware. For the Versatile PB I don't think the IRQ line assignment for MMCI has ever been correct for either of the two MMCI blocks. It would be nice if someone with the physical PB board could test this. Patch tested on the Versatile AB, QEMU for Versatile AB and QEMU for Versatile PB. Cc: Rob Herring <robh@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: stable@vger.kernel.org Fixes: 0976c946a610 ("arm/versatile: Fix versatile irq specifications") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 07 January 2016, 05:32:19 UTC
a461a3e ARM: nomadik: set latencies to 8 cycles The Nomadik has sporadic crashes because of these latencies, setting them to max makes the platform work nicely, so use this values for now. These latencies were set to 2 since the Nomadik platform was merged, but I suspect they never took effect until the right size and associativity for the cache was specified in the device tree and that is why the crash comes now. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 07 January 2016, 05:30:13 UTC
b06f3a1 Merge tag 'for-linus-20160106' of git://git.infradead.org/linux-mtd Pull MTD fixes from Brian Norris: "Three last MTD fixes for v4.4. These are all fixes for regressions and bugs reported mid cycle. Unfortunately, some of them took a bit long to get proper testing and feedback. - Assign the default MTD name earlier in the registration process, so partition parsers (like cmdlinepart) see the right name. Without this, some systems may come up with unpartitioned flash. This was a v4.4-rc1 regression. - Revert some new Winbond SPI NOR flash unlocking/locking support; new code in v4.4 caused regressions on some Spansion flash. - Fix mis-typed parameter ordering in SPI NOR unlock function; this bug was introduced in v4.4-rc1" * tag 'for-linus-20160106' of git://git.infradead.org/linux-mtd: mtd: spi-nor: fix stm_is_locked_sr() parameters mtd: spi-nor: fix Spansion regressions (aliased with Winbond) mtd: fix cmdlinepart parser, early naming for auto-filled MTD 07 January 2016, 04:32:08 UTC
51cb67c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "As usual, there are a couple straggler bug fixes: 1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic driver. Fix from Insu Yun. 2) SKB refcounting bug in connector, from Florian Westphal. 3) vrf_get_saddr() has to propagate fib_lookup() errors to it's callers, from David Ahern. 4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat. 5) qdisc_rcu_free() fails to free the per-cpu qstats. Fix from John Fastabend. 6) vmxnet3 driver passes wrong page to dma_map_page(), fix from Shrikrishna Khare. 7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix zero cwnd in tcp_cwnd_reduction Driver: Vmxnet3: Fix regression caused by 5738a09 net: qmi_wwan: Add WeTelecom-WPD600N mkiss: fix scribble on freed memory net: possible use after free in dst_release net: sched: fix missing free per cpu on qstats ARM: net: bpf: fix zero right shift 6pack: fix free memory scribbles net: filter: make JITs zero A for SKF_AD_ALU_XOR_X bridge: Only call /sbin/bridge-stp for the initial network namespace af_unix: Fix splice-bind deadlock net: Propagate lookup failure in l3mdev_get_saddr to caller r8152: add reset_resume function connector: bump skb->users before callback invocation cxgb4: correctly handling failed allocation qlcnic: correctly handle qlcnic_alloc_mbx_args 07 January 2016, 00:15:03 UTC
8b8a321 tcp: fix zero cwnd in tcp_cwnd_reduction Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 21:39:56 UTC
58caf63 Driver: Vmxnet3: Fix regression caused by 5738a09 Reported-by: Bingkuo Liu <bingkuol@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 21:20:13 UTC
e439bd4 net: qmi_wwan: Add WeTelecom-WPD600N The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 20:50:00 UTC
fde55c4 mkiss: fix scribble on freed memory commit d79f16c046086f4fe0d42184a458e187464eb83e fixed a user triggerable scribble on free memory but added a new one which allows the user to scribble even more and user controlled data into freed space. As with 6pack we need to halt the queue before we free the buffers, because the transmit logic is not protected by the semaphore. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 20:06:27 UTC
07a5d38 net: possible use after free in dst_release dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()") Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 20:00:27 UTC
3f37b26 Merge tag 'asoc-fix-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute fixes for v4.4 A few final fixes for v4.4, the main one being the two patches to the new Sky Lake drivers which fix a previous incorrect fix that went in during an earlier -rc. 06 January 2016, 19:53:28 UTC
e7b11dc ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") unified the GPMC debug for the SoCs with GPMC. The commit also left out the option for HWMOD_INIT_NO_RESET as we now require proper timings for GPMC to be able to remap GPMC devices out of address 0. Unfortunately on Nokia N900, onenand now only partially works with the device tree provided timings. It works enough to get detected but the clock rate supported by the onenand chip gets misdetected. This in turn causes the GPMC timings to be miscalculated and this leads into file system corruption on N900. Looks like onenand needs CS_CONFIG1 bit 27 WRITETYPE set for for sync write. This is needed also for async timings when we write to onenand with omap2_onenand_set_async_mode(). Without sync write bit set, the async read for the onenand ONENAND_REG_VERSION_ID will return 0xfff. Let's exit with an error if onenand rate is not detected. And let's remove the extra call to omap2_onenand_set_async_mode() as we only need to do this once at the end of omap2_onenand_setup_async(). Fixes: 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") Cc: stable@vger.kernel.org # v4.2+ Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> 06 January 2016, 17:21:09 UTC
093e584 sched/core: Reset task's lockless wake-queues on fork() In the following commit: 7675104990ed ("sched: Implement lockless wake-queues") we gained lockless wake-queues. The -RT kernel managed to lockup itself with those. There could be multiple attempts for task X to enqueue it for a wakeup _even_ if task X is already running. The reason is that task X could be runnable but not yet on CPU. The the task performing the wakeup did not leave the CPU it could performe multiple wakeups. With the proper timming task X could be running and enqueued for a wakeup. If this happens while X is performing a fork() then its its child will have a !NULL `wake_q` member copied. This is not a problem as long as the child task does not participate in lockless wakeups :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 7675104990ed ("sched: Implement lockless wake-queues") Link: http://lkml.kernel.org/r/20151221171710.GA5499@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 January 2016, 10:01:07 UTC
be958bd sched/core: Fix unserialized r-m-w scribbling stuff Some of the sched bitfieds (notably sched_reset_on_fork) can be set on other than current, this can cause the r-m-w to race with other updates. Since all the sched bits are serialized by scheduler locks, pull them in a separate word. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: hannes@cmpxchg.org Cc: mhocko@kernel.org Cc: vdavydov@parallels.com Link: http://lkml.kernel.org/r/20151125150207.GM11639@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 January 2016, 10:01:07 UTC
570f524 sched/core: Check tgid in is_global_init() Our global init task can have sub-threads, so ->pid check is not reliable enough for is_global_init(), we need to check tgid instead. This has been spotted by Oleg and a fix was proposed by Richard a long time ago (see the link below). Oleg wrote: : Because is_global_init() is only true for the main thread of /sbin/init. : : Just look at oom_unkillable_task(). It tries to not kill init. But, say, : select_bad_process() can happily find a sub-thread of is_global_init() : and still kill it. I recently hit the problem in question; re-sending the patch (to the best of my knowledge it has never been submitted) with updated function comment. Credit goes to Oleg and Richard. Suggested-by: Richard Guy Briggs <rgb@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W . Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge E . Hallyn <serge.hallyn@ubuntu.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://www.redhat.com/archives/linux-audit/2013-December/msg00086.html Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 January 2016, 10:01:06 UTC
9e0e83a sched/fair: Fix multiplication overflow on 32-bit systems Make 'r' 64-bit type to avoid overflow in 'r * LOAD_AVG_MAX' on 32-bit systems: UBSAN: Undefined behaviour in kernel/sched/fair.c:2785:18 signed integer overflow: 87950 * 47742 cannot be represented in type 'int' The most likely effect of this bug are bad load average numbers resulting in weird scheduling. It's also likely that this can persist for a longer time - until the system goes idle for a long time so that all load avg numbers get reset. [ This is the CFS load average metric, not the procfs output, which is separate. ] Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking") Link: http://lkml.kernel.org/r/1450097243-30137-1-git-send-email-aryabinin@virtuozzo.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 January 2016, 10:01:05 UTC
12ca6ad perf: Fix race in swevent hash There's a race on CPU unplug where we free the swevent hash array while it can still have events on. This will result in a use-after-free which is BAD. Simply do not free the hash array on unplug. This leaves the thing around and no use-after-free takes place. When the last swevent dies, we do a for_each_possible_cpu() iteration anyway to clean these up, at which time we'll free it, so no leakage will occur. Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 January 2016, 09:52:39 UTC
c127449 perf: Fix race in perf_event_exec() I managed to tickle this warning: [ 2338.884942] ------------[ cut here ]------------ [ 2338.890112] WARNING: CPU: 13 PID: 35162 at ../kernel/events/core.c:2702 task_ctx_sched_out+0x6b/0x80() [ 2338.900504] Modules linked in: [ 2338.903933] CPU: 13 PID: 35162 Comm: bash Not tainted 4.4.0-rc4-dirty #244 [ 2338.911610] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 [ 2338.923071] ffffffff81f1468e ffff8807c6457cb8 ffffffff815c680c 0000000000000000 [ 2338.931382] ffff8807c6457cf0 ffffffff810c8a56 ffffe8ffff8c1bd0 ffff8808132ed400 [ 2338.939678] 0000000000000286 ffff880813170380 ffff8808132ed400 ffff8807c6457d00 [ 2338.947987] Call Trace: [ 2338.950726] [<ffffffff815c680c>] dump_stack+0x4e/0x82 [ 2338.956474] [<ffffffff810c8a56>] warn_slowpath_common+0x86/0xc0 [ 2338.963195] [<ffffffff810c8b4a>] warn_slowpath_null+0x1a/0x20 [ 2338.969720] [<ffffffff811a49cb>] task_ctx_sched_out+0x6b/0x80 [ 2338.976244] [<ffffffff811a62d2>] perf_event_exec+0xe2/0x180 [ 2338.982575] [<ffffffff8121fb6f>] setup_new_exec+0x6f/0x1b0 [ 2338.988810] [<ffffffff8126de83>] load_elf_binary+0x393/0x1660 [ 2338.995339] [<ffffffff811dc772>] ? get_user_pages+0x52/0x60 [ 2339.001669] [<ffffffff8121e297>] search_binary_handler+0x97/0x200 [ 2339.008581] [<ffffffff8121f8b3>] do_execveat_common.isra.33+0x543/0x6e0 [ 2339.016072] [<ffffffff8121fcea>] SyS_execve+0x3a/0x50 [ 2339.021819] [<ffffffff819fc165>] stub_execve+0x5/0x5 [ 2339.027469] [<ffffffff819fbeb2>] ? entry_SYSCALL_64_fastpath+0x12/0x71 [ 2339.034860] ---[ end trace ee1337c59a0ddeac ]--- Which is a WARN_ON_ONCE() indicating that cpuctx->task_ctx is not what we expected it to be. This is because context switches can swap the task_struct::perf_event_ctxp[] pointer around. Therefore you have to either disable preemption when looking at current, or hold ctx->lock. Fix perf_event_enable_on_exec(), it loads current->perf_event_ctxp[] before disabling interrupts, therefore a preemption in the right place can swap contexts around and we're using the wrong one. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: syzkaller <syzkaller@googlegroups.com> Link: http://lkml.kernel.org/r/20151210195740.GG6357@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 January 2016, 09:52:38 UTC
16605e8 dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock" This reverts commit e958e079e254 ("dmaengine: mic_x100: add missing spin_unlock"). The above patch is incorrect. There is nothing wrong with the original code. The spin_lock is acquired in the "prep" functions and released in "submit". Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 06 January 2016, 09:46:36 UTC
73c20a8 net: sched: fix missing free per cpu on qstats When a qdisc is using per cpu stats (currently just the ingress qdisc) only the bstats are being freed. This also free's the qstats. Fixes: b0ab6f92752b9f9d8 ("net: sched: enable per cpu qstats") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 06:40:21 UTC
f941461 ARM: net: bpf: fix zero right shift The LSR instruction cannot be used to perform a zero right shift since a 0 as the immediate value (imm5) in the LSR instruction encoding means that a shift of 32 is perfomed. See DecodeIMMShift() in the ARM ARM. Make the JIT skip generation of the LSR if a zero-shift is requested. This was found using american fuzzy lop. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 06:32:09 UTC
60aa3b0 6pack: fix free memory scribbles commit acf673a3187edf72068ee2f92f4dc47d66baed47 fixed a user triggerable free memory scribble but in doing so replaced it with a different one that allows the user to control the data and scribble even more. sixpack_close is called by the tty layer in tty context. The tty context is protected by sp_get() and sp_put(). However network layer activity via sp_xmit() is not protected this way. We must therefore stop the queue otherwise the user gets to dump a buffer mostly of their choice into freed kernel pages. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 06:25:01 UTC
55795ef net: filter: make JITs zero A for SKF_AD_ALU_XOR_X The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum") Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 06 January 2016, 05:43:52 UTC
a32d5b7 mtd: spi-nor: fix stm_is_locked_sr() parameters stm_is_locked_sr() takes the status register (SR) value as the last parameter, not the second. Reported-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Bayi Cheng <bayi.cheng@mediatek.com> 06 January 2016, 00:00:41 UTC
67b9bcd mtd: spi-nor: fix Spansion regressions (aliased with Winbond) Spansion and Winbond have occasionally used the same manufacturer ID, and they don't support the same features. Particularly, writing SR=0 seems to break read access for Spansion's s25fl064k. Unfortunately, we don't currently have a way to differentiate these Spansion and Winbond parts, so rather than regressing support for these Spansion flash, let's drop the new Winbond lock/unlock support for now. We can try to address Winbond support during the next release cycle. Original discussion: http://patchwork.ozlabs.org/patch/549173/ http://patchwork.ozlabs.org/patch/553683/ Fixes: 357ca38d4751 ("mtd: spi-nor: support lock/unlock/is_locked for Winbond") Fixes: c6fc2171b249 ("mtd: spi-nor: disable protection for Winbond flash at startup") Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reported-by: Felix Fietkau <nbd@openwrt.org> Cc: Felix Fietkau <nbd@openwrt.org> 06 January 2016, 00:00:03 UTC
bc42f36 Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 05 January 2016, 23:07:33 UTC
84a5347 Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus 05 January 2016, 23:07:33 UTC
449af26 Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linus 05 January 2016, 23:07:32 UTC
7a78d94 Merge remote-tracking branch 'asoc/fix/arizona' into asoc-linus 05 January 2016, 23:07:32 UTC
ff62198 bridge: Only call /sbin/bridge-stp for the initial network namespace [I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 05 January 2016, 21:46:17 UTC
ee9a7d2 Merge tag 'trace-v4.4-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two more fixes: 1. The recordmcount change had an output that used sprintf() (incorrectly) when it should have been a fprintf() to stderr. 2. The printk_formats file could crash if someone added a trace_printk() in the core kernel, and also added one in a module. This does not affect production kernels. Only kernels where developers add trace_printk() for debugging can crash" * tag 'trace-v4.4-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix setting of start_index in find_next() ftrace/scripts: Fix incorrect use of sprintf in recordmcount 05 January 2016, 21:32:39 UTC
3331f99 Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile bugfix from Chris Metcalf: "This fixes a bug that Sudip's buildbot found for tilepro allmodconfig. I've tagged it for stable only back to 3.19, which was when most of the other affected architectures added their support for working around this issue" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: provide CONFIG_PAGE_SIZE_64KB etc for tilepro 05 January 2016, 21:21:19 UTC
c1b27ab tile: provide CONFIG_PAGE_SIZE_64KB etc for tilepro This allows the build system to know that it can't attempt to configure the Lustre virtual block device, for example, when tilepro is using 64KB pages (as it does by default). The tilegx build already provided those symbols. Previously we required that the tilepro hypervisor be rebuilt with a different hardcoded page size in its headers, and then Linux be rebuilt using the updated hypervisor header. Now we allow each of the hypervisor and Linux to be built independently. We still check at boot time to ensure that the page size provided by the hypervisor matches what Linux expects. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: stable@vger.kernel.org [3.19+] 05 January 2016, 13:16:09 UTC
d801836 ASoC: Intel: Skylake: Fix the memory leak This provide the fix for firmware memory by freeing the pointer in driver remove where it is safe to do so Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> 05 January 2016, 11:48:51 UTC
fb203ad ASoC: Intel: Skylake: Revert previous broken fix memory leak fix This reverts commit 87b5ed8ecb9fe05a696e1c0b53c7a49ea66432c1 ("ASoC: Intel: Skylake: fix memory leak") as it causes regression on Skylake devices The SKL drivers can be deferred probe. The topology file based widgets can have references to topology file so this can't be freed until card is fully created, so revert this patch for now [ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc [ 66.690735] IP: [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0 [ 66.702925] Oops: 0000 [#1] PREEMPT SMP [ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62 [ 66.778869] Hardware name: Intel Corporation Skylake Client platform [ 66.793201] Workqueue: deferwq deferred_probe_work_func [ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000 [ 66.807692] RIP: 0010:[<ffffffff806c94dd>] [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286 [ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe [ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc [ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff [ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc [ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000 [ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0 [ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.903052] Stack: [ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000 [ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918 [ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940 [ 66.930855] Call Trace: [ 66.933646] [<ffffffff806cb1db>] string.isra.4+0x3b/0xd0 [ 66.939793] [<ffffffff806ccbd6>] vsnprintf+0x116/0x540 [ 66.945742] [<ffffffff806d02f0>] kvasprintf+0x40/0x80 [ 66.951591] [<ffffffff806d0370>] kasprintf+0x40/0x50 [ 66.957359] [<ffffffffa00c085f>] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core] [ 66.966771] [<ffffffff8057dd1e>] ? __kmalloc+0x16e/0x2a0 [ 66.972931] [<ffffffffa00c0dab>] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core] [ 66.981857] [<ffffffffa00be8c0>] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core] [ 67.007828] [<ffffffffa00b92ed>] soc_probe_component+0x23d/0x360 [snd_soc_core] [ 67.016244] [<ffffffff80b14e69>] ? mutex_unlock+0x9/0x10 [ 67.022405] [<ffffffffa00ba02f>] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core] [ 67.031329] [<ffffffff8049eeb2>] ? debug_mutex_init+0x32/0x40 [ 67.037973] [<ffffffffa00baa92>] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core] [ 67.046619] [<ffffffffa00c8b54>] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] [ 67.055539] [<ffffffffa01c303b>] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286] [ 67.064292] [<ffffffff808aa887>] platform_drv_probe+0x37/0x90 Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> 05 January 2016, 11:48:39 UTC
c845acb af_unix: Fix splice-bind deadlock On 2015/11/06, Dmitry Vyukov reported a deadlock involving the splice system call and AF_UNIX sockets, http://lists.openwall.net/netdev/2015/11/06/24 The situation was analyzed as (a while ago) A: socketpair() B: splice() from a pipe to /mnt/regular_file does sb_start_write() on /mnt C: try to freeze /mnt wait for B to finish with /mnt A: bind() try to bind our socket to /mnt/new_socket_name lock our socket, see it not bound yet decide that it needs to create something in /mnt try to do sb_start_write() on /mnt, block (it's waiting for C). D: splice() from the same pipe to our socket lock the pipe, see that socket is connected try to lock the socket, block waiting for A B: get around to actually feeding a chunk from pipe to file, try to lock the pipe. Deadlock. on 2015/11/10 by Al Viro, http://lists.openwall.net/netdev/2015/11/10/4 The patch fixes this by removing the kern_path_create related code from unix_mknod and executing it as part of unix_bind prior acquiring the readlock of the socket in question. This means that A (as used above) will sb_start_write on /mnt before it acquires the readlock, hence, it won't indirectly block B which first did a sb_start_write and then waited for a thread trying to acquire the readlock. Consequently, A being blocked by C waiting for B won't cause a deadlock anymore (effectively, both A and B acquire two locks in opposite order in the situation described above). Dmitry Vyukov(<dvyukov@google.com>) tested the original patch. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 January 2016, 04:22:49 UTC
b5bdacf net: Propagate lookup failure in l3mdev_get_saddr to caller Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 January 2016, 03:58:30 UTC
7ec2541 r8152: add reset_resume function When the reset_resume() is called, the flag of SELECTIVE_SUSPEND should be cleared and reinitialize the device, whether the SELECTIVE_SUSPEND is set or not. If reset_resume() is called, it means the power supply is cut or the device is reset. That is, the device wouldn't be in runtime suspend state and the reinitialization is necessary. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 January 2016, 03:02:08 UTC
55285bf connector: bump skb->users before callback invocation Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 05 January 2016, 02:46:45 UTC
3934aa4 cxgb4: correctly handling failed allocation Since t4_alloc_mem can be failed in memory pressure, if not properly handled, NULL dereference could be happened. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 January 2016, 22:18:42 UTC
b77357b qlcnic: correctly handle qlcnic_alloc_mbx_args Since qlcnic_alloc_mbx_args can be failed, return value should be checked. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 January 2016, 22:14:30 UTC
9daf38f drm/nouveau/gr/nv40: fix oops in interrupt handler fdo#93557 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org 04 January 2016, 21:51:18 UTC
f36d1be tracing: Fix setting of start_index in find_next() When we do cat /sys/kernel/debug/tracing/printk_formats, we hit kernel panic at t_show. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 2957 Comm: sh Tainted: G W O 3.14.55-x86_64-01062-gd4acdc7 #2 RIP: 0010:[<ffffffff811375b2>] [<ffffffff811375b2>] t_show+0x22/0xe0 RSP: 0000:ffff88002b4ebe80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000004 RSI: ffffffff81fd26a6 RDI: ffff880032f9f7b1 RBP: ffff88002b4ebe98 R08: 0000000000001000 R09: 000000000000ffec R10: 0000000000000000 R11: 000000000000000f R12: ffff880004d9b6c0 R13: 7365725f6d706400 R14: ffff880004d9b6c0 R15: ffffffff82020570 FS: 0000000000000000(0000) GS:ffff88003aa00000(0063) knlGS:00000000f776bc40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000f6c02ff0 CR3: 000000002c2b3000 CR4: 00000000001007f0 Call Trace: [<ffffffff811dc076>] seq_read+0x2f6/0x3e0 [<ffffffff811b749b>] vfs_read+0x9b/0x160 [<ffffffff811b7f69>] SyS_read+0x49/0xb0 [<ffffffff81a3a4b9>] ia32_do_call+0x13/0x13 ---[ end trace 5bd9eb630614861e ]--- Kernel panic - not syncing: Fatal exception When the first time find_next calls find_next_mod_format, it should iterate the trace_bprintk_fmt_list to find the first print format of the module. However in current code, start_index is smaller than *pos at first, and code will not iterate the list. Latter container_of will get the wrong address with former v, which will cause mod_fmt be a meaningless object and so is the returned mod_fmt->fmt. This patch will fix it by correcting the start_index. After fixed, when the first time calls find_next_mod_format, start_index will be equal to *pos, and code will iterate the trace_bprintk_fmt_list to get the right module printk format, so is the returned mod_fmt->fmt. Link: http://lkml.kernel.org/r/5684B900.9000309@intel.com Cc: stable@vger.kernel.org # 3.12+ Fixes: 102c9323c35a8 "tracing: Add __tracepoint_string() to export string pointers" Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 04 January 2016, 20:22:47 UTC
472b444 mtd: fix cmdlinepart parser, early naming for auto-filled MTD Commit 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set") attempted to provide some default settings for MTDs that (a) assign the parent device and (b) don't provide their own name or owner However, this isn't a perfect drop-in replacement for the boilerplate found in some drivers, because the MTD name is used by partition parsers like cmdlinepart, but the name isn't set until add_mtd_device(), after the parsing is completed. This means cmdlinepart sees a NULL name and therefore will not work properly. Fix this by moving the default name and owner assignment to be first in the MTD registration process. [Note: this does not fix all reported issues, particularly with NAND drivers. Will require an additional fix for drivers/mtd/nand/] Fixes: 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set") Reported-by: Heiko Schocher <hs@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Frans Klaver <fransklaver@gmail.com> 04 January 2016, 18:54:18 UTC
713a3e4 ftrace/scripts: Fix incorrect use of sprintf in recordmcount Fix build warning: scripts/recordmcount.c:589:4: warning: format not a string literal and no format arguments [-Wformat-security] sprintf("%s: failed\n", file); Fixes: a50bd43935586 ("ftrace/scripts: Have recordmcount copy the object file") Link: http://lkml.kernel.org/r/1451516801-16951-1-git-send-email-colin.king@canonical.com Cc: Li Bin <huawei.libin@huawei.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 04 January 2016, 16:13:16 UTC
1683098 Linux 4.4-rc8 03 January 2016, 23:15:37 UTC
4294616 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS build fix from Ralf Baechle: "Fix a makefile issue resulting in build breakage with older binutils. This has sat in -next for a few days, testers and buildbot are happy with it, too though if you are going for another -rc that'd certainly help ironing out a few more issues" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: VDSO: Fix build error with binutils 2.24 and earlier 03 January 2016, 19:49:31 UTC
4e5e384 Merge tag 'drm-intel-fixes-2016-01-02' of git://anongit.freedesktop.org/drm-intel Pull i915 drm fixes from Jani Nikula: "Two display fixes still for v4.4. The new year's resolution is to start using signed tags per Linus' request. This one is still unsigned; I want to fix this up in our maintainer scripts instead of doing it one-off" * tag 'drm-intel-fixes-2016-01-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: increase the tries for HDMI hotplug live status checking drm/i915: Unbreak check_digital_port_conflicts() 03 January 2016, 19:36:26 UTC
9c982e8 Merge tag 'pci-v4.4-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI bugfix from Bjorn Helgaas: "Here's another fix for v4.4. This fixes 32-bit config reads for the HiSilicon driver. Obviously the driver is completely broken without this fix (apparently it actually was tested internally, but got broken somehow in the process of upstreaming it). Summary: HiSilicon host bridge driver Fix 32-bit config reads (Dongdong Liu)" * tag 'pci-v4.4-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit reads 31 December 2015, 22:59:21 UTC
7c672dd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: "Just some missing syscall wire ups" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Wire up mlock2 system call. sparc: Add all necessary direct socket system calls. 31 December 2015, 22:46:49 UTC
8f5daf2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Prevent XFRM per-cpu counter updates for one namespace from being applied to another namespace. Fix from DanS treetman. 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes Berg. 3) Remove ethernet header assumption in nft_do_chain_netdev(), from Pablo Neira Ayuso. 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal Speck. 5) Fix use after free in sixpack_close and mkiss_close. 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz. 7) natsemi doesn't check for DMA mapping errors, from Alexey Khoroshilov. 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin. 9) Missing initialization of needed_headroom in geneve tunnel driver, from Paolo Abeni. 10) Fix conntrack template leak in openvswitch, from Joe Stringer. 11) Mission initialization of wq->flags in sock_alloc_inode(), from Nicolai Stange. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close net, socket, socket_wq: fix missing initialization of flags drivers: net: cpsw: fix error return code openvswitch: Fix template leak in error cases. sctp: label accepted/peeled off sockets sctp: use GFP_USER for user-controlled kmalloc qlcnic: fix a loop exit condition better net: cdc_ncm: avoid changing RX/TX buffers on MTU changes geneve: initialize needed_headroom ipv6: honor ifindex in case we receive ll addresses in router advertisements addrconf: always initialize sysctl table data ipv6/addrlabel: fix ip6addrlbl_get() switchdev: bridge: Pass ageing time as clock_t instead of jiffies sh_eth: fix 16-bit descriptor field access endianness too veth: don’t modify ip_summed; doing so treats packets with bad checksums as good. net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card natsemi: add checks for dma mapping errors rhashtable: Kill harmless RCU warning in rhashtable_walk_init openvswitch: correct encoding of set tunnel action attributes ... 31 December 2015, 22:40:43 UTC
42d85c5 sparc: Wire up mlock2 system call. Signed-off-by: David S. Miller <davem@davemloft.net> 31 December 2015, 20:38:56 UTC
8b30ca7 sparc: Add all necessary direct socket system calls. The GLIBC folks would like to eliminate socketcall support eventually, and this makes sense regardless so wire them all up. Signed-off-by: David S. Miller <davem@davemloft.net> 31 December 2015, 20:18:02 UTC
694341c ARM: Fix broken USB support in sunxi_defconfig Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to sunxi_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to sunxi_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Reported-by: David Tulloh <david@tulloh.id.au> Tested-by: David Tulloh <david@tulloh.id.au> Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> 31 December 2015, 16:01:59 UTC
068d8bd sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 December 2015, 21:57:16 UTC
a0ccc3f Merge tag 'wireless-drivers-for-davem-2015-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * don't load firmware that won't exist for 7260 * fix RCU splat ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 30 December 2015, 21:42:31 UTC
574aab1 net, socket, socket_wq: fix missing initialization of flags Commit ceb5d58b2170 ("net: fix sock_wake_async() rcu protection") from the current 4.4 release cycle introduced a new flags member in struct socket_wq and moved SOCKWQ_ASYNC_NOSPACE and SOCKWQ_ASYNC_WAITDATA from struct socket's flags member into that new place. Unfortunately, the new flags field is never initialized properly, at least not for the struct socket_wq instance created in sock_alloc_inode(). One particular issue I encountered because of this is that my GNU Emacs failed to draw anything on my desktop -- i.e. what I got is a transparent window, including the title bar. Bisection lead to the commit mentioned above and further investigation by means of strace told me that Emacs is indeed speaking to my Xorg through an O_ASYNC AF_UNIX socket. This is reproducible 100% of times and the fact that properly initializing the struct socket_wq ->flags fixes the issue leads me to the conclusion that somehow SOCKWQ_ASYNC_WAITDATA got set in the uninitialized ->flags, preventing my Emacs from receiving any SIGIO's due to data becoming available and it got stuck. Make sock_alloc_inode() set the newly created struct socket_wq's ->flags member to zero. Fixes: ceb5d58b2170 ("net: fix sock_wake_async() rcu protection") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 December 2015, 21:38:01 UTC
c616920 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Make the block layer great again. Basically three amazing fixes in this pull request, split into 4 patches. Believe me, they should go into 4.4. Two of them fix a regression, the third and last fixes an easy-to-trigger bug. - Fix a bad irq enable through null_blk, for queue_mode=1 and using timer completions. Add a block helper to restart a queue asynchronously, and use that from null_blk. From me. - Fix a performance issue in NVMe. Some devices (Intel Pxxxx) expose a stripe boundary, and performance suffers if we cross it. We took that into account for merging, but not for the newer splitting code. Fix from Keith. - Fix a kernel oops in lightnvm with multiple channels. From Matias" * 'for-linus' of git://git.kernel.dk/linux-block: lightnvm: wrong offset in bad blk lun calculation null_blk: use async queue restart helper block: add blk_start_queue_async() block: Split bios on chunk boundaries 30 December 2015, 18:26:20 UTC
dd7a5ab x86/numachip: Fix NumaConnect2 MMCFG PCI access The MMCFG PCI accessors weren't being setup for NumacConnect2 correctly due to over-early assignment; this would create the potential for the wrong PCI domain to be accessed. Fix this by using the correct arch-specific PCI init function. Signed-off-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Steffen Persvold <sp@numascale.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1451498807-15920-1-git-send-email-daniel@numascale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 30 December 2015, 18:19:03 UTC
783513e ASoC: Use nested lock for snd_soc_dapm_mutex_lock snd_soc_dapm_mutex_lock currently uses the un-nested call which can cause lockdep warnings when called from control handlers (a relatively common usage) and using modules. As creating the control causes a potential mutex inversion with the handler, creating the control will take the controls_rwsem under the dapm_mutex and accessing the control will take the dapm_mutex under controls_rwsem. All the users look like they want to be using the runtime class of the lock anyway, so this patch just changes snd_soc_dapm_mutex_lock to use the nested call, with the SND_SOC_DAPM_CLASS_RUNTIME class. Fixes: f6d5e586b416 ("ASoC: dapm: Add helpers to lock/unlock DAPM mutex") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> 30 December 2015, 16:48:13 UTC
ca8457b ASoC: rt5645: add sys clk detection Add system clock detection to prevent output DC from SPO. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> 30 December 2015, 16:35:07 UTC
3d8acd1 drm/i915: increase the tries for HDMI hotplug live status checking The total delay of HDMI hotplug detecting with 30ms is sometimes not enoughtfor HDMI live status up with specific HDMI monitors in BSW platform. After doing experiments for following monitors, it needs 80ms at least for those worst cases. Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms) Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms) BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms) DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms) HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms) It looks like 70-80 ms is BSW platform needs in some bad cases of the monitors at this end (8 times delay at most). Keep less than 100ms for HDCP pulse HPD low (with at least 100ms) to respond a plug out. Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.com Tested-by: Shobhit Kumar <shobhit.kumar@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit f8d03ea0053b23de42c828d559016eabe0b91523) [Jani: undo the file mode change of the original commit] Signed-off-by: Jani Nikula <jani.nikula@intel.com> 30 December 2015, 11:58:37 UTC
866be88 Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "9 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/vmstat: fix overflow in mod_zone_page_state() ocfs2/dlm: clear migration_pending when migration target goes down mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone() ocfs2: fix flock panic issue m32r: add io*_rep helpers m32r: fix build failure arch/x86/xen/suspend.c: include xen/xen.h mm: memcontrol: fix possible memcg leak due to interrupted reclaim ocfs2: fix BUG when calculate new backup super 30 December 2015, 02:04:41 UTC
e25bd6c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fix from Al Viro: "Fix for 3.15 breakage of fcntl64() in arm OABI compat. -stable fodder" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [PATCH] arm: fix handling of F_OFD_... in oabi_fcntl64() 30 December 2015, 01:46:29 UTC
6cdb18a mm/vmstat: fix overflow in mod_zone_page_state() mod_zone_page_state() takes a "delta" integer argument. delta contains the number of pages that should be added or subtracted from a struct zone's vm_stat field. If a zone is larger than 8TB this will cause overflows. E.g. for a zone with a size slightly larger than 8TB the line mod_zone_page_state(zone, NR_ALLOC_BATCH, zone->managed_pages); in mm/page_alloc.c:free_area_init_core() will result in a negative result for the NR_ALLOC_BATCH entry within the zone's vm_stat, since 8TB contain 0x8xxxxxxx pages which will be sign extended to a negative value. Fix this by changing the delta argument to long type. This could fix an early boot problem seen on s390, where we have a 9TB system with only one node. ZONE_DMA contains 2GB and ZONE_NORMAL the rest. The system is trying to allocate a GFP_DMA page but ZONE_DMA is completely empty, so it tries to reclaim pages in an endless loop. This was seen on a heavily patched 3.10 kernel. One possible explaination seem to be the overflows caused by mod_zone_page_state(). Unfortunately I did not have the chance to verify that this patch actually fixes the problem, since I don't have access to the system right now. However the overflow problem does exist anyway. Given the description that a system with slightly less than 8TB does work, this seems to be a candidate for the observed problem. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2015, 01:45:49 UTC
cc28d6d ocfs2/dlm: clear migration_pending when migration target goes down We have found a BUG on res->migration_pending when migrating lock resources. The situation is as follows. dlm_mark_lockres_migration res->migration_pending = 1; __dlm_lockres_reserve_ast dlm_lockres_release_ast returns with res->migration_pending remains because other threads reserve asts wait dlm_migration_can_proceed returns 1 >>>>>>> o2hb found that target goes down and remove target from domain_map dlm_migration_can_proceed returns 1 dlm_mark_lockres_migrating returns -ESHOTDOWN with res->migration_pending still remains. When reentering dlm_mark_lockres_migrating(), it will trigger the BUG_ON with res->migration_pending. So clear migration_pending when target is down. Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2015, 01:45:49 UTC
5f0f288 mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone() test_pages_in_a_zone() does not account for the possibility of missing sections in the given pfn range. pfn_valid_within always returns 1 when CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing sections to pass the test, leading to a kernel oops. Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check for missing sections before proceeding into the zone-check code. This also prevents a crash from offlining memory devices with missing sections. Despite this, it may be a good idea to keep the related patch '[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with missing sections' because missing sections in a memory block may lead to other problems not covered by the scope of this fix. Signed-off-by: Andrew Banman <abanman@sgi.com> Acked-by: Alex Thorlton <athorlton@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2015, 01:45:49 UTC
b5a8bc3 ocfs2: fix flock panic issue Commit 4f6563677ae8 ("Move locks API users to locks_lock_inode_wait()") move flock/posix lock indentify code to locks_lock_inode_wait(), but missed to set fl_flags to FL_FLOCK which caused the following kernel panic on 4.4.0_rc5. kernel BUG at fs/locks.c:1895! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2(O) ocfs2_dlmfs(O) ocfs2_stack_o2cb(O) ocfs2_dlm(O) ocfs2_nodemanager(O) ocfs2_stackglue(O) iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 0 PID: 20268 Comm: flock_unit_test Tainted: G O 4.4.0-rc5-next-20151217 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007b3672c0 ti: ffff880028b58000 task.ti: ffff880028b58000 RIP: locks_lock_inode_wait+0x2e/0x160 Call Trace: ocfs2_do_flock+0x91/0x160 [ocfs2] ocfs2_flock+0x76/0xd0 [ocfs2] SyS_flock+0x10f/0x1a0 entry_SYSCALL_64_fastpath+0x12/0x71 Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 48 81 ec 88 00 00 00 8b 46 40 83 e0 03 83 f8 01 0f 84 ad 00 00 00 83 f8 02 74 04 <0f> 0b eb fe 4c 8d ad 60 ff ff ff 4c 8d 7b 58 e8 0e 8e 73 00 4d RIP locks_lock_inode_wait+0x2e/0x160 RSP <ffff880028b5bce8> ---[ end trace dfca74ec9b5b274c ]--- Fixes: 4f6563677ae8 ("Move locks API users to locks_lock_inode_wait()") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2015, 01:45:49 UTC
92a8ed4 m32r: add io*_rep helpers m32r allmodconfig was failing with the error: error: implicit declaration of function 'read' On checking io.h it turned out that 'read' is not defined but 'readb' is defined and 'ioread8' will then obviously mean 'readb'. At the same time some of the helper functions ioreadN_rep() and iowriteN_rep() were missing which also led to the build failure. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2015, 01:45:49 UTC
6122192 m32r: fix build failure m32r allmodconfig is failing with: In file included from ../include/linux/kvm_para.h:4:0, from ../kernel/watchdog.c:26: ../include/uapi/linux/kvm_para.h:30:26: fatal error: asm/kvm_para.h: No such file or directory kvm_para.h was not included in the build. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 December 2015, 01:45:49 UTC
back to top