https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
18558ca Linux 4.5-rc4 14 February 2016, 21:05:20 UTC
58dd2b5 Merge tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are 3 fixes for some reported issues. Two nvmem driver fixes, and one mei fix. All have been in linux-next just fine" * tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: qfprom: Specify LE device endianness nvmem: core: return error for non word aligned access mei: validate request value in client notify request ioctl 14 February 2016, 20:47:45 UTC
60f4058 Merge tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is one driver core, well klist, fix for 4.5-rc4. It fixes a problem found in the scsi device list traversal that probably also could be triggered by other subsystems. The fix has been in linux-next for a while with no reported problems" * tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: klist: fix starting point removed bug in klist iterators 14 February 2016, 20:34:53 UTC
779ee19 Merge tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 4.5-rc4 that resolve some reported issues. One of them got reverted as it wasn't correct based on testing, and all have been in linux-next for a while" * tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "8250: uniphier: allow modular build with 8250 console" pty: make sure super_block is still valid in final /dev/tty close pty: fix possible use after free of tty->driver_data tty: Add support for PCIe WCH382 2S multi-IO card serial/omap: mark wait_for_xmitr as __maybe_unused serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485) 8250: uniphier: allow modular build with 8250 console tty: Drop krefs for interrupted tty lock 14 February 2016, 20:29:59 UTC
9db8cc1 Merge tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull PHY fixes from Greg KH: "Here are a couple of PHY driver fixes for 4.5-rc4. A few small phy issues. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload phy: twl4030-usb: Relase usb phy on unload phy: core: fix wrong err handle for phy_power_on phy: Restrict phy-hi6220-usb to HiSilicon arm64 14 February 2016, 20:24:28 UTC
102a92c Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "Another round of fixes for the perf tooling side: - Prevent a NULL pointer dereference in tracepoint error handling - Fix a thread handling bug in the intel_pt error handling code - Search both .eh_frame and .debug_frame sections as toolchains seem to have random choices of storing the CFI information - Fix the perf state interval output values, which got broken when fixing the overall output" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf stat: Fix interval output values perf probe: Search both .eh_frame and .debug_frame sections for probe location perf tools: Fix thread lifetime related segfaut in intel_pt perf tools: tracepoint_error() can receive e=NULL, robustify it 14 February 2016, 20:07:55 UTC
cb490d6 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull lockdep fix from Thomas Gleixner: "A single fix for the stack trace caching logic in lockdep, where the duplicate avoidance managed to store no back trace at all" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix stack trace caching logic 14 February 2016, 20:02:05 UTC
6a81094 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix preventing a 32bit overflow in timespec/val to cputime conversions on 32bit machines" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cputime: Prevent 32bit overflow in time[val|spec]_to_cputime() 14 February 2016, 19:57:24 UTC
8ab54ed Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip fixes from Thomas Gleixner: "Another set of ARM SoC related irqchip fixes: - Plug a memory leak in gicv3-its - Limit features to the root gic interrupt controller - Add a missing barrier in the gic-v3 IAR access - Another compile test fix for sun4i" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor irqchip/gic: Only set the EOImodeNS bit for the root controller irqchip/gic: Only populate set_affinity for the root controller irqchip/gicv3-its: Fix memory leak in its_free_tables() irqchip/sun4i: Fix compilation outside of arch/arm 14 February 2016, 19:49:30 UTC
2d23e61 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two small fixlets for x86: - Prevent a KASAN false positive in thread_saved_pc() - Fix a 32-bit truncation problem in the x86 numa code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernels x86: Fix KASAN false positives in thread_saved_pc() 14 February 2016, 18:50:26 UTC
ab57a61 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Here's the first round of MIPS fixes after the merge window: - Detect Octeon III's PCI correctly. - Fix return value of the MT7620 probing function. - Wire up the copy_file_range syscall. - Fix 64k page support on 32 bit kernels. - Fix the early Coherency Manager probe. - Allow only hardware-supported page sizes to be selected for R6000. - Fix corner cases for the RDHWR nstruction emulation on old hardware. - Fix FPU handling corner cases. - Remove stale entry for BCM33xx from the MAINTAINERS file. - 32 and 64 bit ELF headers are different, handle them correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: mips: Differentiate between 32 and 64 bit ELF header MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe() MIPS: Fix early CM probing MIPS: Wire up copy_file_range syscall. MIPS: Fix 64k page support for 32 bit kernels. MIPS: R6000: Don't allow 64k pages for R6000. MIPS: traps.c: Correct microMIPS RDHWR emulation MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler MAINTAINERS: Remove stale entry for BCM33xx chips MIPS: Fix FPU disable with preemption MIPS: Properly disable FPU in start_thread() MIPS: Fix buffer overflow in syscall_get_arguments() 14 February 2016, 18:49:01 UTC
be3f4e0 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "A couple of ARM fixes from Linus for the ICST clock generator code" [ "Linus" here is Linus Walleij. Name-stealer. Linus "there can be only one" Torvalds ] * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8519/1: ICST: try other dividends than 1 ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz() 14 February 2016, 18:46:47 UTC
8b9f9eb Merge branch 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull component helper fixes from Russell King: "A few fixes for problems people have encountered with the recent update to the component helpers" * 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: component: remove device from master match list on failed add component: Detach components when deleting master struct component: fix crash on x86_64 with hda audio drivers 14 February 2016, 18:40:21 UTC
7686e3c Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma fixes from Doug Ledford: "I think we are getting pretty close to done now. There are four one-off fixes in this update: - fix ipoib multicast joins - fix mlx4 error handling - fix mlx5 size computation - fix a thinko in core code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Fix RC transport send queue overhead computation IB/ipoib: fix for rare multicast join race condition IB/core: Fix reading capability mask of the port info class net/mlx4: fix some error handling in mlx4_multi_func_init() 14 February 2016, 01:35:23 UTC
2f2e9f2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "This includes the long awaited series to address a set of bugs around active I/O remote-port LUN_RESET, as well as properly handling this same case with concurrent fabric driver session disconnect -> reconnect. Note this set of LUN_RESET bug-fixes has been surviving extended testing on both v4.5-rc1 and v3.14.y code over the last weeks, and is CC'ed for stable as it's something folks using multiple ESX connected hosts with slow backends can certainly trigger. The highlights also include: - Fix WRITE_SAME/DISCARD emulation 4k sector conversion in target/iblock (Mike Christie) - Fix TMR abort interaction and AIO type TMR response in qla2xxx target (Quinn Tran + Swapnil Nagle) - Fix >= v3.17 stale descriptor pointer regression in qla2xxx target (Quinn Tran) - Fix >= v4.5-rc1 return regression with unmap_zeros_data_store new configfs store handler (nab) - Add CPU affinity flag + convert qla2xxx to use bit (Quinn + HCH + Bart)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity target/transport: add flag to indicate CPU Affinity is observed target: Fix incorrect unmap_zeroes_data_store return qla2xxx: Use ATIO type to send correct tmr response qla2xxx: Fix stale pointer access. target/user: Fix cast from pointer to phys_addr_t target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usage target: Fix race with SCF_SEND_DELAYED_TAS handling target: Fix remote-port TMR ABORT + se_cmd fabric stop target: Fix TAS handling for multi-session se_node_acls target: Fix LUN_RESET active TMR descriptor handling target: Fix LUN_RESET active I/O handling for ACK_KREF qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM qla2xxx: Fix warning reported by static checker target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors 14 February 2016, 00:39:27 UTC
4617c22 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics in this pull request: - Compilation fixes on SPEAR, and U8500 thermal drivers. - RCAR thermal driver now recognizes OF-thermal based thermal zones. - Small code rework on OF-thermal. - These change have been CI tested using KernelCI bot [1,2]. \o/ I am taking over on Rui's behalf while he is out. Happy New Chinese Year! [1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/ [2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: cpu_cooling: fix out of bounds access in time_in_idle thermal: allow u8500-thermal driver to be a module thermal: allow spear-thermal driver to be a module thermal: spear: use __maybe_unused for PM functions thermal: rcar: enable to use thermal-zone on DT thermal: of: use for_each_available_child_of_node for child iterator 13 February 2016, 21:05:56 UTC
b4e4334 Merge tag 'sound-fix-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull another sound fix from Takashi Iwai: "This contains a fix for the double-free of usb-audio MIDI device at probe failure" * tag 'sound-fix-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: avoid freeing umidi object twice 13 February 2016, 21:04:47 UTC
e835a65 Merge tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "I've been sitting on some of these fixes for a while. - Corner case of returning to delay slot from interrupt - Changing default interrupt prioiry level - Kconfig'ize support for super pages - Other minor fixes" * tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: Introduce explicit super page size support ARCv2: intc: Allow interruption by lowest priority interrupt ARCv2: Check for LL-SC livelock only if LLSC is enabled ARC: shrink cpuinfo by not saving full timer BCR ARCv2: clocksource: Rename GRTC -> GFRC ... ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2 13 February 2016, 16:18:21 UTC
07d86ca ALSA: usb-audio: avoid freeing umidi object twice The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 13 February 2016, 08:30:58 UTC
0cbb0b9 Merge tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are some Renesas binding updates for PCI host controllers, a Broadcom fix for a regression we added in v4.5-rc1, and a fix for an AER use-after-free problem that can cause memory corruption. Summary: AER: Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior) Broadcom iProc host bridge driver: Allow multiple devices except on PAXC (Ray Jui) Renesas R-Car host bridge driver: Add gen2 device tree support for r8a7793 (Simon Horman) Add device tree support for r8a7793 (Simon Horman)" * tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add device tree support for r8a7793 PCI: rcar: Add gen2 device tree support for r8a7793 PCI: iproc: Allow multiple devices except on PAXC PCI/AER: Flush workqueue on device remove to avoid use-after-free 12 February 2016, 23:31:22 UTC
29f1bf3 Merge branch 'akpm'(patches from Andrew) Merge fixes from Andrew Morton: "10 fixes" The lockdep hlist conversion is in the locking tree too, waiting for the next merge window. Andrew thought it should go in now. I'll take it, since it fixes a real problem and looks trivially correct (famous last words). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI mm: fix pfn_t vs highmem kernel/locking/lockdep.c: convert hash tables to hlists mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE mm,thp: khugepaged: call pte flush at the time of collapse mm/backing-dev.c: fix error path in wb_init() mm, dax: check for pmd_none() after split_huge_pmd() vsprintf: kptr_restrict is okay in IRQ when 2 mm: fix filemap.c kernel doc warning ubsan: cosmetic fix to Kconfig text 12 February 2016, 21:12:27 UTC
75c1657 IB/mlx5: Fix RC transport send queue overhead computation Fix the RC QPs send queue overhead computation to take into account two additional segments in the WQE which are needed for registration operations. The ATOMIC and UMR segments can't coexist together, so chose maximum out of them. The commit 9e65dc371b5c ("IB/mlx5: Fix RC transport send queue overhead computation") was intended to update RC transport as commit messages states, but added the code to UC transport. Fixes: 9e65dc371b5c ("IB/mlx5: Fix RC transport send queue overhead computation") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 12 February 2016, 19:56:08 UTC
08bc327 IB/ipoib: fix for rare multicast join race condition A narrow window for race condition still exist between multicast join thread and *dev_flush workers. A kernel crash caused by prolong erratic link state changes was observed (most likely a faulty cabling): [167275.656270] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib] [167275.674443] PGD 0 [167275.677373] Oops: 0000 [#1] SMP ... [167275.977530] Call Trace: [167275.982225] [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib] [167275.992024] [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490 [ib_ipoib] [167276.002149] [<ffffffff8109d5fb>] process_one_work+0x17b/0x470 [167276.010754] [<ffffffff8109e3cb>] worker_thread+0x11b/0x400 [167276.019088] [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400 [167276.027737] [<ffffffff810a5aef>] kthread+0xcf/0xe0 Here was a hit spot: ipoib_mcast_join() { .............. rec.qkey = priv->broadcast->mcmember.qkey; ^^^^^^^ ..... } Proposed patch should prevent multicast join task to continue if link state change is detected. Signed-off-by: Alex Estrin <alex.estrin@intel.com> Changes from v4: - as suggested by Doug Ledford, optimized spinlock usage, i.e. ipoib_mcast_join() is called with lock held. Changes from v3: - sync with priv->lock before flag check. Chages from v2: - Move check for OPER_UP flag state to mcast_join() to ensure no event worker is in progress. - minor style fixes. Changes from v1: - No need to lock again if error detected. Signed-off-by: Doug Ledford <dledford@redhat.com> 12 February 2016, 19:53:22 UTC
5952cc7 Merge tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.5 rc4. MMC core: - Fix an sysfs ABI regression - Return an error in a specific error path dealing with mmc ioctls MMC host: - sdhci-pci|acpi: Fix card detect race for Intel BXT/APL - sh_mmcif: Correct TX DMA channel allocation - mmc_spi: Fix error handling for dma mapping errors - sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count - pxamci: Fix the device-tree probe deferral path - pxamci: Fix read-only GPIO polarity" * tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc: Revert "mmc: block: don't use parameter prefix if built as module" mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL mmc: sdhci-pci: Fix card detect race for Intel BXT/APL mmc: sdhci: Allow override of get_cd() called from sdhci_request() mmc: sdhci: Allow override of mmc host operations mmc: sh_mmcif: Correct TX DMA channel allocation mmc: block: return error on failed mmc_blk_get() mmc: pxamci: fix the device-tree probe deferral path mmc: mmc_spi: add checks for dma mapping error mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path mmc: pxamci: fix again read-only gpio detection polarity 12 February 2016, 17:48:55 UTC
0df34ad Merge tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "In this rc, we've got more volume than previous rc, unsurprisingly; the majority of updates in ASoC are about Intel drivers, and another major changes are the continued plumbing of ALSA timer bugs revealed by syzkaller fuzzer. Hopefully both settle down now. Other than that, HD-audio received a couple of code fixes as well as the usual quirks, and various small fixes are found for FireWire devices, ASoC codecs and drivers" * tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits) ASoC: arizona: fref must be limited in pseudo-fractional mode ASoC: sigmadsp: Fix missleading return value ALSA: timer: Fix race at concurrent reads ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt() ALSA: hda - Fix bad dereference of jack object ALSA: timer: Fix race between stop and interrupt ALSA: timer: Fix wrong instance passed to slave callbacks ASoC: Intel: Add module tags for common match module ASoC: Intel: Load the atom DPCM driver only ASoC: Intel: Create independent acpi match module ASoC: Intel: Revert "ASoC: Intel: fix ACPI probe regression with Atom DPCM driver" ALSA: dummy: Implement timer backend switching more safely ALSA: hda - Fix speaker output from VAIO AiO machines Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo" ALSA: firewire-tascam: remove needless member for control and status message ALSA: firewire-tascam: remove a flag for controller ALSA: firewire-tascam: add support for FW-1804 ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails ALSA: hda - Fix static checker warning in patch_hdmi.c ASoC: Intel: Skylake: Remove autosuspend delay ... 12 February 2016, 17:42:05 UTC
14379cd Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fix omap2plus_defconfig to enable omapfb as it was in v4.4 - ocfb: fix timings for margins - s6e8ax0, da8xx-fb: fix compile warnings - mmp: fix build failure caused by bad printk parameters - imxfb: fix clock issue which kept the display off * tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: fbdev: imxfb: Provide a reset mechanism fbdev: mmp: print IRQ resource using %pR format string fbdev: da8xx-fb: remove incorrect type cast fbdev: s6e8ax0: avoid unused function warnings ocfb: fix tgdel and tvdel timing parameters ARM: omap2plus_defconfig: update display configs 12 February 2016, 17:39:34 UTC
4c05121 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of seven fixes: Two regressions in the new hisi_sas arm driver, a blacklist entry for the marvell console which was causing a reset cascade without it, a race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac driver, without which, it would prematurely return EIO and a couple of fixes for the hyper-v storvsc driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled SCSI: Add Marvell Console to VPD blacklist scsi_dh_rdac: always retry MODE SELECT on command lock violation storvsc: Use the specified target ID in device lookup storvsc: Install the storvsc specific timeout handler for FC devices hisi_sas: fix v1 hw check for slot error hisi_sas: add dependency for HAS_IOMEM 12 February 2016, 17:32:37 UTC
c747f97 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm amd fixes from Dave Airlie: "Been pretty quiet. This is an amdgpu fixes pull from AMD, a bunch of powerplay stability fixes, race fix, hibernate fix, and a possible circular locking fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits) drm/amdgpu: fix issue with overlapping userptrs drm/radeon: hold reference to fences in radeon_sa_bo_new drm/amdgpu: remove unnecessary forward declaration drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2) drm/amdgpu: fix s4 resume drm/amdgpu/cz: plumb pg flags through to powerplay drm/amdgpu/tonga: plumb pg flags through to powerplay drma/dmgpu: move cg and pg flags into shared headers drm/amdgpu: remove unused cg defines drm/amdgpu: add a cgs interface to fetch cg and pg flags drm/amd/powerplay/tonga: disable vce pg drm/amd/powerplay/tonga: disable uvd pg drm/amd/powerplay/cz: disable vce pg drm/amd/powerplay/cz: disable uvd pg drm/amdgpu: be consistent with uvd cg flags drm/amdgpu: clean up vce pg flags for cz/st drm/amdgpu: handle vce pg flags properly drm/amdgpu: handle uvd pg flags properly drm/amdgpu/dpm/ci: switch over to the common pcie caps interface drm/amdgpu/cik: don't mess with aspm if gpu is root bus ... 12 February 2016, 17:27:31 UTC
df8c272 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull crypto fix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: EVM: Use crypto_memneq() for digest comparisons 12 February 2016, 17:24:48 UTC
27c9d77 Merge branch 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has a few fixes from Filipe, along with a readdir fix from Dave that we've been testing for some time" * 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: properly set the termination value of ctx->pos in readdir Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl Btrfs: remove no longer used function extent_read_full_page_nolock() Btrfs: fix page reading in extent_same ioctl leading to csum errors Btrfs: fix invalid page accesses in extent_same (dedup) ioctl 12 February 2016, 17:21:28 UTC
dfc8528 Merge tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fix from Dve Chinner: "This contains a fix for an endian conversion issue in new CRC validation in log recovery that was discovered on a ppc64 platform" * tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: fix endianness error when checking log block crc on big endian platforms 12 February 2016, 17:17:03 UTC
86c2ee1 Merge tag 'asoc-fix-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.5 A rather large batch of fixes here, almost all in the Intel driver. The changes that got merged in this merge window for Skylake were rather large and as well as issues that you'd expect in a large block of new code there were some problems created for older processors which needed fixing up. Things are largely settling down now hopefully. 12 February 2016, 08:48:51 UTC
613317b EVM: Use crypto_memneq() for digest comparisons This patch fixes vulnerability CVE-2016-2085. The problem exists because the vm_verify_hmac() function includes a use of memcmp(). Unfortunately, this allows timing side channel attacks; specifically a MAC forgery complexity drop from 2^128 to 2^12. This patch changes the memcmp() to the cryptographically safe crypto_memneq(). Reported-by: Xiaofei Rex Guo <xiaofei.rex.guo@intel.com> Signed-off-by: Ryan Ware <ware@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com> 12 February 2016, 07:36:47 UTC
37eda9d ARC: mm: Introduce explicit super page size support MMUv4 supports 2 concurrent page sizes: Normal and Super [4K to 16M] So far Linux supported a single super page size for a given Normal page, depending on the software page walking address split. e.g. we had 11:8:13 address split for 8K page, which meant super page was 2 ^(8+13) = 2M (given that THP size has to be PMD_SHIFT) Now we turn this around, by allowing multiple Super Pages in Kconfig (currently 2M and 16M only) and forcing page walker address split to PGDIR_SHIFT and PAGE_SHIFT For configs without Super page, things are same as before and PGDIR_SHIFT can be hacked to get non default address split The motivation for this change is a customer who needs 16M super page and a 8K Normal page combo. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 12 February 2016, 06:40:25 UTC
6b44d1e Merge tag 'phy-for-4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.5-rc *) Fix error handling code in phy core [phy_power_on()] *) phy-twl4030-usb fixes for unloading the module *) Restrict phy-hi6220-usb to HiSilicon arm64 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 12 February 2016, 04:10:58 UTC
1ecb4ae arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI arch/x86/built-in.o: In function `uv_bios_call': (.text+0xeba00): undefined reference to `efi_call' Reported-by: kbuild test robot <fengguang.wu@intel.com> Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Alex Thorlton <athorlton@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
db78c22 mm: fix pfn_t vs highmem The pfn_t type uses an unsigned long to store a pfn + flags value. On a 64-bit platform the upper 12 bits of an unsigned long are never used for storing the value of a pfn. However, this is not true on highmem platforms, all 32-bits of a pfn value are used to address a 44-bit physical address space. A pfn_t needs to store a 64-bit value. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112211 Fixes: 01c8f1c44b83 ("mm, dax, gpu: convert vm_insert_mixed to pfn_t") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Stuart Foster <smf.linux@ntlworld.com> Reported-by: Julian Margetson <runaway@candw.ms> Tested-by: Julian Margetson <runaway@candw.ms> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
4a38981 kernel/locking/lockdep.c: convert hash tables to hlists Mike said: : CONFIG_UBSAN_ALIGNMENT breaks x86-64 kernel with lockdep enabled, i. e : kernel with CONFIG_UBSAN_ALIGNMENT fails to load without even any error : message. : : The problem is that ubsan callbacks use spinlocks and might be called : before lockdep is initialized. Particularly this line in the : reserve_ebda_region function causes problem: : : lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); : : If i put lockdep_init() before reserve_ebda_region call in : x86_64_start_reservations kernel loads well. Fix this ordering issue permanently: change lockdep so that it uses hlists for the hash tables. Unlike a list_head, an hlist_head is in its initialized state when it is all-zeroes, so lockdep is ready for operation immediately upon boot - lockdep_init() need not have run. The patch will also save some memory. lockdep_init() and lockdep_initialized can be done away with now - a 4.6 patch has been prepared to do this. Reported-by: Mike Krinkin <krinkin.m.u@gmail.com> Suggested-by: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
6b75d14 mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE [akpm@linux-foundation.org: s/threshhold/threshold/] Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
6a6ac72 mm,thp: khugepaged: call pte flush at the time of collapse This showed up on ARC when running LMBench bw_mem tests as Overlapping TLB Machine Check Exception triggered due to STLB entry (2M pages) overlapping some NTLB entry (regular 8K page). bw_mem 2m touches a large chunk of vaddr creating NTLB entries. In the interim khugepaged kicks in, collapsing the contiguous ptes into a single pmd. pmdp_collapse_flush()->flush_pmd_tlb_range() is called to flush out NTLB entries for the ptes. This for ARC (by design) can only shootdown STLB entries (for pmd). The stray NTLB entries cause the overlap with the subsequent STLB entry for collapsed page. So make pmdp_collapse_flush() call pte flush interface not pmd flush. Note that originally all thp flush call sites in generic code called flush_tlb_range() leaving it to architecture to implement the flush for pte and/or pmd. Commit 12ebc1581ad11454 changed this by calling a new opt-in API flush_pmd_tlb_range() which made the semantics more explicit but failed to distinguish the pte vs pmd flush in generic code, which is what this patch fixes. Note that ARC can fixed w/o touching the generic pmdp_collapse_flush() by defining a ARC version, but that defeats the purpose of generic version, plus sementically this is the right thing to do. Fixes STAR 9000961194: LMBench on AXS103 triggering duplicate TLB exceptions with super pages Fixes: 12ebc1581ad11454 ("mm,thp: introduce flush_pmd_tlb_range") Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
078c6c3 mm/backing-dev.c: fix error path in wb_init() We need to use post-decrement to get percpu_counter_destroy() called on &wb->stat[0]. Moreover, the pre-decremebt would cause infinite out-of-bounds accesses if the setup code failed at i==0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
6b9116a mm, dax: check for pmd_none() after split_huge_pmd() DAX implements split_huge_pmd() by clearing pmd. This simple approach reduces memory overhead, as we don't need to deposit page table on huge page mapping to make split_huge_pmd() never-fail. PTE table can be allocated and populated later on page fault from backing store. But one side effect is that have to check if pmd is pmd_none() after split_huge_pmd(). In most places we do this already to deal with parallel MADV_DONTNEED. But I found two call sites which is not affected by MADV_DONTNEED (due down_write(mmap_sem)), but need to have the check to work with DAX properly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
7eb3912 vsprintf: kptr_restrict is okay in IRQ when 2 The kptr_restrict flag, when set to 1, only prints the kernel address when the user has CAP_SYSLOG. When it is set to 2, the kernel address is always printed as zero. When set to 1, this needs to check whether or not we're in IRQ. However, when set to 2, this check is unneccessary, and produces confusing results in dmesg. Thus, only make sure we're not in IRQ when mode 1 is used, but not mode 2. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
62eb320 mm: fix filemap.c kernel doc warning Add missing kernel-doc notation for function parameter 'gfp_mask' to fix kernel-doc warning. mm/filemap.c:1898: warning: No description found for parameter 'gfp_mask' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
7707535 ubsan: cosmetic fix to Kconfig text When enabling UBSAN_SANITIZE_ALL, the kernel image size gets increased significantly (~3x). So, it sounds better to have some note in Kconfig. And, fixed a typo. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 February 2016, 02:35:48 UTC
c05235d Merge tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Probe errorpath fix for the Altera - irqchip ofnode pointer added to the DaVinci driver - controller instance number correction for DaVinci * tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: davinci: Fix the number of controllers allocated gpio: davinci: Add the missing of-node pointer gpio: gpio-altera: Remove gpiochip on probe failure. 11 February 2016, 19:25:55 UTC
da2f912 Merge tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Just two small fixes for the 4.5-rc cycle: intel_scu_ipcutil: - underflow in scu_reg_access() intel-hid: - fix incorrect entries in intel_hid_keymap" * tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_scu_ipcutil: underflow in scu_reg_access() intel-hid: fix incorrect entries in intel_hid_keymap 11 February 2016, 19:17:19 UTC
5de6ac7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix BPF handling of branch offset adjustmnets on backjumps, from Daniel Borkmann. 2) Make sure selinux knows about SOCK_DESTROY netlink messages, from Lorenzo Colitti. 3) Fix openvswitch tunnel mtu regression, from David Wragg. 4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric Dumazet. 5) Fix SCTP user hmacid byte ordering bug, from Xin Long. 6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bpf: fix branch offset adjustment on backjumps after patching ctx expansion vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices geneve: Relax MTU constraints vxlan: Relax MTU constraints flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities. selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables sctp: translate network order to host order when users get a hmacid enic: increment devcmd2 result ring in case of timeout tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs net:Add sysctl_max_skb_frags tcp: do not drop syn_recv on all icmp reports ipv6: fix a lockdep splat unix: correctly track in-flight fds in sending process user_struct update be2net maintainers' email addresses dwc_eth_qos: Reset hardware before PHY start ipv6: addrconf: Fix recursive spin lock call 11 February 2016, 19:00:34 UTC
ee50aea IB/core: Fix reading capability mask of the port info class When checking specific attribute from a bit mask, need to use bitwise AND and not logical AND, fixed that. Fixes: 145d9c541032 ('IB/core: Display extended counter set if available') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 11 February 2016, 16:05:56 UTC
fa51b24 net/mlx4: fix some error handling in mlx4_multi_func_init() The while loop after err_slaves should use post-decrement; otherwise we'll fail to do the kfrees for i==0, and will run into out-of-bounds accesses if the setup above failed already at i==0. [I'm not sure why one even bothers populating the ->vlan_filter array: mlx4.h isn't #included by anything outside drivers/net/ethernet/mellanox/mlx4/, and "git grep -C2 -w vlan_filter drivers/net/ethernet/mellanox/mlx4/" seems to suggest that the vlan_filter elements aren't used at all.] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Doug Ledford <dledford@redhat.com> 11 February 2016, 16:04:54 UTC
a5ebb87 Revert "mmc: block: don't use parameter prefix if built as module" This reverts commit 829b6962f7e3cfc06f7c5c26269fd47ad48cf503. Revert this change as it causes a sysfs path to change and therefore introduces and ABI regression. More precisely Android's vold is not being able to access /sys/module/mmcblk/parameters/perdev_minors any more, since the path becomes changed to: "/sys/module/mmc_block/..." Fixes: 829b6962f7e3 ("mmc: block: don't use parameter prefix if built as module") Reported-by: John Stultz <john.stultz@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 11 February 2016, 15:49:35 UTC
a53b839 thermal: cpu_cooling: fix out of bounds access in time_in_idle In __cpufreq_cooling_register() we allocate the arrays for time_in_idle and time_in_idle_timestamp to be as big as the number of cpus in this cpufreq device. However, in get_load() we access this array using the cpu number as index, which can result in an out of bound access. Index time_in_idle{,_timestamp} using the index in the cpufreq_device's allowed_cpus mask, as we do for the load_cpu array in cpufreq_get_requested_power() Reported-by: Nicolas Boichat <drinkcat@chromium.org> Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 11 February 2016, 15:13:29 UTC
bc4ef75 btrfs: properly set the termination value of ctx->pos in readdir The value of ctx->pos in the last readdir call is supposed to be set to INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a larger value, then it's LLONG_MAX. There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++" overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a 64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before the increment. We can get to that situation like that: * emit all regular readdir entries * still in the same call to readdir, bump the last pos to INT_MAX * next call to readdir will not emit any entries, but will reach the bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX Normally this is not a problem, but if we call readdir again, we'll find 'pos' set to LLONG_MAX and the unconditional increment will overflow. The report from Victor at (http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging print shows that pattern: Overflow: e Overflow: 7fffffff Overflow: 7fffffffffffffff PAX: size overflow detected in function btrfs_real_readdir fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0; context: dir_context; CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1 Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015 ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48 ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78 ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8 Call Trace: [<ffffffff81742f0f>] dump_stack+0x4c/0x7f [<ffffffff811cb706>] report_size_overflow+0x36/0x40 [<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0 [<ffffffff811dafc8>] iterate_dir+0xa8/0x150 [<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70 [<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0 Overflow: 1a [<ffffffff811db070>] ? iterate_dir+0x150/0x150 [<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83 The jump from 7fffffff to 7fffffffffffffff happens when new dir entries are not yet synced and are processed from the delayed list. Then the code could go to the bump section again even though it might not emit any new dir entries from the delayed list. The fix avoids entering the "bump" section again once we've finished emitting the entries, both for synced and delayed entries. References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284 Reported-by: Victor <services@swwu.com> CC: stable@vger.kernel.org Signed-off-by: David Sterba <dsterba@suse.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by: Chris Mason <clm@fb.com> 11 February 2016, 15:01:59 UTC
e972c37 ARM: 8519/1: ICST: try other dividends than 1 Since the dawn of time the ICST code has only supported divide by one or hang in an eternal loop. Luckily we were always dividing by one because the reference frequency for the systems using the ICSTs is 24MHz and the [min,max] values for the PLL input if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop will always terminate immediately without assigning any divisor for the reference frequency. But for the code to make sense, let's insert the missing i++ Reported-by: David Binderman <dcb314@hotmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 11 February 2016, 14:12:33 UTC
49b245e Merge tag 'gic-fixes-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull GIC fixes from Marc for 4.5-rc4: - Two fixes addressing cascaded GICv1/GICv2 (affinity setting, EOImode) - One fix addressing possible missed interrupts on GICv3 11 February 2016, 10:47:55 UTC
6a645dd mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL Intel BXT/APL use a card detect GPIO however the host controller will not enable bus power unless it's card detect also reflects the presence of a card. Unfortunately those 2 things race which can result in commands not starting, after which the controller does nothing and there is a 10 second wait for the driver's 10-second timer to timeout. That is fixed by having the driver look also at the present state register to determine if the card is present. Consequently, provide a 'get_cd' mmc host operation for BXT/APL that does that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 11 February 2016, 10:39:56 UTC
163cbe3 mmc: sdhci-pci: Fix card detect race for Intel BXT/APL Intel BXT/APL use a card detect GPIO however the host controller will not enable bus power unless it's card detect also reflects the presence of a card. Unfortunately those 2 things race which can result in commands not starting, after which the controller does nothing and there is a 10 second wait for the driver's 10-second timer to timeout. That is fixed by having the driver look also at the present state register to determine if the card is present. Consequently, provide a 'get_cd' mmc host operation for BXT/APL that does that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 11 February 2016, 10:39:56 UTC
8d28b7a mmc: sdhci: Allow override of get_cd() called from sdhci_request() Drivers may need to provide their own get_cd() mmc host op, but currently the internals of the current op (sdhci_get_cd()) are provided by sdhci_do_get_cd() which is also called from sdhci_request(). To allow override of the get_cd functionality, change sdhci_request() to call ->get_cd() instead of sdhci_do_get_cd(). Note, in the future the call to ->get_cd() will likely be removed from sdhci_request() since most drivers don't need actually it. However this change is being done now to facilitate a subsequent bug fix. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 11 February 2016, 10:39:56 UTC
bf60e59 mmc: sdhci: Allow override of mmc host operations In the past, fixes for specific hardware devices were implemented in sdhci using quirks. That approach is no longer accepted because the growing number of quirks was starting to make the code difficult to understand and maintain. One alternative to quirks, is to allow drivers to override the default mmc host operations. This patch makes it easy to do that, and it is needed for a subsequent bug fix, for which separate patches are provided. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 11 February 2016, 10:39:56 UTC
f4d3d50 mips: Differentiate between 32 and 64 bit ELF header Depending on the configuration either the 32 or 64 bit version of elf_check_arch() is defined. parse_crash_elf{32|64}_headers() does some basic verification of the ELF header via vmcore_elf{32|64}_check_arch() which happen to map to elf_check_arch(). Since the implementation 32 and 64 bit version of elf_check_arch() differ, we use the wrong type: In file included from include/linux/elf.h:4:0, from fs/proc/vmcore.c:13: fs/proc/vmcore.c: In function 'parse_crash_elf64_headers': >> arch/mips/include/asm/elf.h:228:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] struct elfhdr *__h = (hdr); \ ^ include/linux/crash_dump.h:41:37: note: in expansion of macro 'elf_check_arch' #define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x)) ^ fs/proc/vmcore.c:1015:4: note: in expansion of macro 'vmcore_elf64_check_arch' !vmcore_elf64_check_arch(&ehdr) || ^ Therefore, we rather define vmcore_elf{32|64}_check_arch() as a basic machine check and use it also in binfm_elf?32.c as well. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Suggested-by: Maciej W. Rozycki <macro@imgtec.com> Reviewed-by: Maciej W. Rozycki <macro@imgtec.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12529/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 11 February 2016, 10:38:22 UTC
1a1ebd5 irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor The ARM GICv3 specification mentions the need for dsb after a read from the ICC_IAR1_EL1 register: 4.1.1 Physical CPU Interface: The effects of reading ICC_IAR0_EL1 and ICC_IAR1_EL1 on the state of a returned INTID are not guaranteed to be visible until after the execution of a DSB. Not having this could result in missed interrupts, so let's add the required barrier. [Marc: fixed commit message] Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 11 February 2016, 10:20:02 UTC
389a00d irqchip/gic: Only set the EOImodeNS bit for the root controller EOImode1 is only used for the root controller and hence only the root controller uses the eoimode1 functions for handling interrupts. However, if the root controller supports EOImode1, then the EOImodeNS bit will be set for all GICs, enabling EOImode1. This is not what we want and this causes interrupts on non-root GICs to only be dropped in priority but never deactivated. Therefore, only set the EOImodeNS bit for the root controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 11 February 2016, 10:20:02 UTC
7bf29d3 irqchip/gic: Only populate set_affinity for the root controller Setting the affinity of an IRQ, it only applicable for the root interrupt controller and so only populate this operator for the root controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 11 February 2016, 10:20:02 UTC
8e7199c component: remove device from master match list on failed add Calling component_add() may result in the completion of a set of devices, which will try to bring up a master. In bringing the master up, we populate its match array with the current set of children. If binding any of the devices fails, component_add() itself will fail, free the struct component entry, and return to the caller. The now-freed entry is never removed from the master's match array, and will later be used in a futile attempt to bind to freed memory. Bring component_add's behaviour on failure to bring up a master into line with component_del by removing the (to-be-freed) component from the master's match array. The specific case which broke was: - rockchip_drm_drv adds a component master - dwhdmi_rockchip adds a child component in probe (master incomplete) - rockchip_drm_vop adds two children in probe, which completes the set - inside component_add, we try to bring up the master, having populated the master's match array, and fail with EPROBE_DEFER from dwhdmi_rockchip; we delete the putative component - rockchip_drm_vop's probe fails and returns EPROBE_DEFER - we later re-probe rockchip_drm_vop and add the component; the master is complete, so we attempt to bring it up again - walking the match array, we find the previous child, whose master pointer doesn't match (as it has been freed in the meantime) - rockchip_drm_vop probe fails, and will never be attempted again Fixes: ffc30b74fd6d01588bd3fdebc3b1acc0857e6fc8 Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <treding@nvidia.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 11 February 2016, 09:42:09 UTC
5327c7d qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Fixes: fb3269b ("qla2xxx: Add selective command queuing") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 11 February 2016, 07:09:00 UTC
9095ada target/transport: add flag to indicate CPU Affinity is observed Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Fixes: fb3269b ("qla2xxx: Add selective command queuing") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 11 February 2016, 07:08:55 UTC
2e498f2 target: Fix incorrect unmap_zeroes_data_store return This patch fixes an incorrect return of zero from the new unmap_zeroes_data_store() configfs store attribute handler introduced in v4.5-rc1, to use the correct 'count' bytes return value. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 11 February 2016, 04:34:56 UTC
43d871f Merge branch 'integration-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.5 11 February 2016, 00:51:38 UTC
721675f Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "A few more minor fixes for rc3: - One fix to ipoib - One fix to core sysfs code - Four patches that resolve an oops found in testing of ocrdma and a couple other ocrdma issues" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA/ocrdma: Fixing ocrdma debugfs directory remove RDMA/ocrdma: Fix pkey_index returned by driver in rq work completion RDMA/ocrdma: populate max_sge_rd in device attributes RDMA/ocrdma: Initialize stats resources in the driver before ib device registration. IB/sysfs: remove unused va_list args IB/IPoIB: Do not set skb truesize since using one linearskb 10 February 2016, 23:11:08 UTC
c92a428 Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes radeon and amdgpu fixes for 4.5. Highlights: - powerplay fixes for amdgpu - race fixes in the sub-allocator in radeon and amdgpu - hibernate fix for amdgpu - fix a possible circular locking in userptr handling in amdgpu * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: fix issue with overlapping userptrs drm/radeon: hold reference to fences in radeon_sa_bo_new drm/amdgpu: remove unnecessary forward declaration drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2) drm/amdgpu: fix s4 resume drm/amdgpu/cz: plumb pg flags through to powerplay drm/amdgpu/tonga: plumb pg flags through to powerplay drma/dmgpu: move cg and pg flags into shared headers drm/amdgpu: remove unused cg defines drm/amdgpu: add a cgs interface to fetch cg and pg flags drm/amd/powerplay/tonga: disable vce pg drm/amd/powerplay/tonga: disable uvd pg drm/amd/powerplay/cz: disable vce pg drm/amd/powerplay/cz: disable uvd pg drm/amdgpu: be consistent with uvd cg flags drm/amdgpu: clean up vce pg flags for cz/st drm/amdgpu: handle vce pg flags properly drm/amdgpu: handle uvd pg flags properly drm/amdgpu/dpm/ci: switch over to the common pcie caps interface drm/amdgpu/cik: don't mess with aspm if gpu is root bus ... 10 February 2016, 22:39:07 UTC
a1b14d2 bpf: fix branch offset adjustment on backjumps after patching ctx expansion When ctx access is used, the kernel often needs to expand/rewrite instructions, so after that patching, branch offsets have to be adjusted for both forward and backward jumps in the new eBPF program, but for backward jumps it fails to account the delta. Meaning, for example, if the expansion happens exactly on the insn that sits at the jump target, it doesn't fix up the back jump offset. Analysis on what the check in adjust_branches() is currently doing: /* adjust offset of jmps if necessary */ if (i < pos && i + insn->off + 1 > pos) insn->off += delta; else if (i > pos && i + insn->off + 1 < pos) insn->off -= delta; First condition (forward jumps): Before: After: insns[0] insns[0] insns[1] <--- i/insn insns[1] <--- i/insn insns[2] <--- pos insns[P] <--- pos insns[3] insns[P] `------| delta insns[4] <--- target_X insns[P] `-----| insns[5] insns[3] insns[4] <--- target_X insns[5] First case is if we cross pos-boundary and the jump instruction was before pos. This is handeled correctly. I.e. if i == pos, then this would mean our jump that we currently check was the patchlet itself that we just injected. Since such patchlets are self-contained and have no awareness of any insns before or after the patched one, the delta is correctly not adjusted. Also, for the second condition in case of i + insn->off + 1 == pos, means we jump to that newly patched instruction, so no offset adjustment are needed. That part is correct. Second condition (backward jumps): Before: After: insns[0] insns[0] insns[1] <--- target_X insns[1] <--- target_X insns[2] <--- pos <-- target_Y insns[P] <--- pos <-- target_Y insns[3] insns[P] `------| delta insns[4] <--- i/insn insns[P] `-----| insns[5] insns[3] insns[4] <--- i/insn insns[5] Second interesting case is where we cross pos-boundary and the jump instruction was after pos. Backward jump with i == pos would be impossible and pose a bug somewhere in the patchlet, so the first condition checking i > pos is okay only by itself. However, i + insn->off + 1 < pos does not always work as intended to trigger the adjustment. It works when jump targets would be far off where the delta wouldn't matter. But, for example, where the fixed insn->off before pointed to pos (target_Y), it now points to pos + delta, so that additional room needs to be taken into account for the check. This means that i) both tests here need to be adjusted into pos + delta, and ii) for the second condition, the test needs to be <= as pos itself can be a target in the backjump, too. Fixes: 9bac3d6d548e ("bpf: allow extended BPF programs access skb fields") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 10 February 2016, 21:56:47 UTC
74c7b2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: colibri-vf50-ts - add missing #include <linux/of.h> Input: adp5589 - fix row 5 handling for adp5589 Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree Input: vmmouse - fix absolute device registration Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver() Input: cap11xx - add missing of_node_put Input: sirfsoc-onkey - allow modular build Input: xpad - remove unused function 10 February 2016, 20:21:57 UTC
4e54169 Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: - PORTS_IMPL workaround for very early ahci controllers is misbehaving on new systems. Disabled on recent ahci versions. - Old-style PIO state machine had a horrible locking problem. Don't know how we've been getting away this far. Fixed. - Other device specific updates. * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: Intel DNV device IDs SATA libata: fix sff host state machine locking while polling libata-sff: use WARN instead of BUG on illegal host state machine state libata: disable forced PORTS_IMPL for >= AHCI 1.3 libata: blacklist a Viking flash model for MWDMA corruption drivers: ata: wake port before DMA stop for ALPM 10 February 2016, 20:04:59 UTC
fb0dc5f Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - The destruction path of cgroup objects are asynchronous and multi-staged and some of them ended up destroying parents before children leading to failures in cpu and memory controllers. Ensure that parents are always destroyed after children. - cpuset mm node migration was performed synchronously while holding threadgroup and cgroup mutexes and the recent threadgroup locking update resulted in a possible deadlock. The migration is best effort and shouldn't have been performed under those locks to begin with. Made asynchronous. - Minor documentation fix. * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Documentation: cgroup: Fix 'cgroup-legacy' -> 'cgroup-v1' cgroup: make sure a parent css isn't freed before its children cgroup: make sure a parent css isn't offlined before its children cpuset: make mm migration asynchronous 10 February 2016, 19:36:19 UTC
f11aec0 Merge remote-tracking branches 'asoc/fix/rt5659', 'asoc/fix/sigmadsp', 'asoc/fix/simple', 'asoc/fix/wm5110' and 'asoc/fix/wm8960' into asoc-linus 10 February 2016, 19:23:09 UTC
733f4c7 Merge remote-tracking branches 'asoc/fix/imx-spdif', 'asoc/fix/mtk', 'asoc/fix/mxs-saif', 'asoc/fix/qcom' and 'asoc/fix/rt286' into asoc-linus 10 February 2016, 19:23:07 UTC
cf0d6dd Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/arizona', 'asoc/fix/dpcm', 'asoc/fix/dwc', 'asoc/fix/fsl' and 'asoc/fix/fsl-ssi' into asoc-linus 10 February 2016, 19:23:04 UTC
97b0d5c Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus 10 February 2016, 19:23:03 UTC
6719f65 Merge remote-tracking branch 'asoc/fix/intel-kconfig' into asoc-linus 10 February 2016, 19:23:02 UTC
7ff60f5 Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 10 February 2016, 19:23:02 UTC
2022d24 Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linus 10 February 2016, 19:23:01 UTC
01582a8 ASoC: arizona: fref must be limited in pseudo-fractional mode When the FLL is in pseudo-fractional mode there is an additional limit on fref based on the fratio, to prevent aliasing around the Nyquist frequency. If fref exceeds this limit the refclk divider must be increased and the calculation tried again until a suitable combination of fref and fratio is found or we have to fall back to integer mode. This patch also adds some debug log prints around this code. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> 10 February 2016, 19:21:41 UTC
cc1de6e drm/amdgpu: fix issue with overlapping userptrs Otherwise we could try to evict overlapping userptr BOs in get_user_pages(), leading to a possible circular locking dependency. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 10 February 2016, 19:07:52 UTC
f6ff4f6 drm/radeon: hold reference to fences in radeon_sa_bo_new An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org 10 February 2016, 19:07:44 UTC
b19763d drm/amdgpu: remove unnecessary forward declaration Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org 10 February 2016, 19:07:38 UTC
a8d81b3 drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2) An arbitrary amount of time can pass between spin_unlock and fence_wait_any_timeout, so we need to ensure that nobody frees the fences from under us. A stress test (rapidly starting and killing hundreds of glxgears instances) ran into a deadlock in fence_wait_any_timeout after about an hour, and this race condition appears to be a plausible cause. v2: agd: rebase on upstream Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org 10 February 2016, 19:07:31 UTC
ca19852 drm/amdgpu: fix s4 resume No need to re-init asic if it's already been initialized. Skip IB tests since kernel processes are frozen in thaw. Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 10 February 2016, 19:07:13 UTC
9aece75 Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Workqueue fixes for v4.5-rc3. - Remove a spurious triggering of flush dependency warning. - Officially break local execution guarantee of unbound work items and add a debug feature to flush out usages which depend on it. - Work around CPU -> NODE mapping becoming invalid on CPU offline. The branch is young but pushing out early as stable kernels are being affected" * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup workqueue: implement "workqueue.debug_force_rr_cpu" debug feature workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs Revert "workqueue: make sure delayed work run in local cpu" workqueue: skip flush dependency checks for legacy workqueues 10 February 2016, 19:04:05 UTC
61c4a1a ASoC: sigmadsp: Fix missleading return value Forwarding the return value of i2c_master_send, leads to errors later on, since i2c_master_send returns the number of bytes transmittet. Check for ret < 0 instead and return 0 otherwise. Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org> 10 February 2016, 18:55:01 UTC
d6e022f workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup When looking up the pool_workqueue to use for an unbound workqueue, workqueue assumes that the target CPU is always bound to a valid NUMA node. However, currently, when a CPU goes offline, the mapping is destroyed and cpu_to_node() returns NUMA_NO_NODE. This has always been broken but hasn't triggered often enough before 874bbfe600a6 ("workqueue: make sure delayed work run in local cpu"). After the commit, workqueue forcifully assigns the local CPU for delayed work items without explicit target CPU to fix a different issue. This widens the window where CPU can go offline while a delayed work item is pending causing delayed work items dispatched with target CPU set to an already offlined CPU. The resulting NUMA_NO_NODE mapping makes workqueue try to queue the work item on a NULL pool_workqueue and thus crash. While 874bbfe600a6 has been reverted for a different reason making the bug less visible again, it can still happen. Fix it by mapping NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node(). This is a temporary workaround. The long term solution is keeping CPU -> NODE mapping stable across CPU off/online cycles which is being worked on. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com 10 February 2016, 17:13:05 UTC
342decf ahci: Intel DNV device IDs SATA Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org 10 February 2016, 16:35:55 UTC
a32ef81 mmc: sh_mmcif: Correct TX DMA channel allocation Commit 27cbd7e815a8 ("mmc: sh_mmcif: rework dma channel handling") introduced a typo causing the TX DMA channel allocation to be overwritten by the requested RX DMA channel. Fixes: 27cbd7e815a8 ("mmc: sh_mmcif: rework dma channel handling") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 10 February 2016, 16:02:25 UTC
b96d6a8 MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III Currently the driver tries to probe the pci driver and oops. Add CN7XXX to case so that driver probes the pcie driver. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: david.daney@cavium.com Cc: matt.redfearn@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12530/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 10 February 2016, 14:08:53 UTC
1902750 Merge branch 'ovs-tunnel-mtu' David Wragg says: ==================== Set a large MTU on ovs-created tunnel devices Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. This patch series sets the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Where relevant, the limits on MTU values that can be directly set on the netdevs are also relaxed. Changes in v2: * Extend to all openvswitch tunnel types, i.e. gre and geneve as well * Use IP_MAX_MTU Changes in v3: * Fix block comment style ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 10 February 2016, 10:50:16 UTC
7e05915 vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: David Wragg <david@weave.works> Signed-off-by: David S. Miller <davem@davemloft.net> 10 February 2016, 10:50:03 UTC
55e5bfb geneve: Relax MTU constraints Allow the MTU of geneve devices to be set to large values, in order to exploit underlying networks with larger frame sizes. GENEVE does not have a fixed encapsulation overhead (an openvswitch rule can add variable length options), so there is no relevant maximum MTU to enforce. A maximum of IP_MAX_MTU is used instead. Encapsulated packets that are too big for the underlying network will get dropped on the floor. Signed-off-by: David Wragg <david@weave.works> Signed-off-by: David S. Miller <davem@davemloft.net> 10 February 2016, 10:50:03 UTC
72564b5 vxlan: Relax MTU constraints Allow the MTU of vxlan devices without an underlying device to be set to larger values (up to a maximum based on IP packet limits and vxlan overhead). Previously, their MTUs could not be set to higher than the conventional ethernet value of 1500. This is a very arbitrary value in the context of vxlan, and prevented vxlan devices from being able to take advantage of jumbo frames etc. The default MTU remains 1500, for compatibility. Signed-off-by: David Wragg <david@weave.works> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 February 2016, 10:50:03 UTC
6ec9249 gpio: davinci: Fix the number of controllers allocated Driver only needs to allocate for [ngpio / 32] controllers, as each controller handles 32 gpios. But the current driver allocates for ngpio of which the extra allocated are unused. Fix it be registering only the required number of controllers. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 10 February 2016, 10:00:49 UTC
310a7e6 gpio: davinci: Add the missing of-node pointer Currently the first parameter of irq_domain_add_legacy is NULL. irq_find_host function returns NULL when we do not populate the of_node and hence irq_of_parse_and_map call fails whenever we want to request a gpio irq. This fixes the request_irq failures for gpio interrupts. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 10 February 2016, 09:59:12 UTC
aaa0bf2 MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: John Crispin <blogic@openwrt.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12451/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 10 February 2016, 09:01:44 UTC
back to top