https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
1a695a9 Linux 4.7-rc1 29 May 2016, 16:29:24 UTC
e0ab7af hash_string: Fix zero-length case for !DCACHE_WORD_ACCESS The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 May 2016, 14:33:47 UTC
f2a031b Rename other copy of hash_string to hashlen_string The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 May 2016, 05:34:33 UTC
037369b hpfs: implement the show_options method The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 May 2016, 23:50:24 UTC
01d6e08 affs: fix remount failure when there are no options changed Commit c8f33d0bec99 ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0bec99 ("affs: kstrdup() memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 May 2016, 23:50:24 UTC
44d5170 hpfs: fix remount failure when there are no options changed Commit ce657611baf9 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611baf9 ("hpfs: kstrdup() out of memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 May 2016, 23:50:24 UTC
4029632 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... 28 May 2016, 23:41:39 UTC
d66492b fs: fix binfmt_aout.c build error Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25d4fc ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 May 2016, 23:34:59 UTC
7e0fb73 Merge branch 'hash' of git://ftp.sciencehorizons.net/linux Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6ca95 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac866ea ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> 28 May 2016, 23:15:25 UTC
4684fe9 h8300: Add <asm/hash.h> This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp 28 May 2016, 19:48:58 UTC
7b13277 microblaze: Add <asm/hash.h> Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> 28 May 2016, 19:48:58 UTC
14c44b9 m68k: Add <asm/hash.h> This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org 28 May 2016, 19:48:57 UTC
468a942 <linux/hash.h>: Add support for architecture-specific functions This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp 28 May 2016, 19:48:31 UTC
2a18da7 fs/namei.c: Improve dcache hash function Patch 0fed3ac866 improved the hash mixing, but the function is slower than necessary; there's a 7-instruction dependency chain (10 on x86) each loop iteration. Word-at-a-time access is a very tight loop (which is good, because link_path_walk() is one of the hottest code paths in the entire kernel), and the hash mixing function must not have a longer latency to avoid slowing it down. There do not appear to be any published fast hash functions that: 1) Operate on the input a word at a time, and 2) Don't need to know the length of the input beforehand, and 3) Have a single iterated mixing function, not needing conditional branches or unrolling to distinguish different loop iterations. One of the algorithms which comes closest is Yann Collet's xxHash, but that's two dependent multiplies per word, which is too much. The key insights in this design are: 1) Barring expensive ops like multiplies, to diffuse one input bit across 64 bits of hash state takes at least log2(64) = 6 sequentially dependent instructions. That is more cycles than we'd like. 2) An operation like "hash ^= hash << 13" requires a second temporary register anyway, and on a 2-operand machine like x86, it's three instructions. 3) A better use of a second register is to hold a two-word hash state. With careful design, no temporaries are needed at all, so it doesn't increase register pressure. And this gets rid of register copying on 2-operand machines, so the code is smaller and faster. 4) Using two words of state weakens the requirement for one-round mixing; we now have two rounds of mixing before cancellation is possible. 5) A two-word hash state also allows operations on both halves to be done in parallel, so on a superscalar processor we get more mixing in fewer cycles. I ended up using a mixing function inspired by the ChaCha and Speck round functions. It is 6 simple instructions and 3 cycles per iteration (assuming multiply by 9 can be done by an "lea" instruction): x ^= *input++; y ^= x; x = ROL(x, K1); x += y; y = ROL(y, K2); y *= 9; Not only is this reversible, two consecutive rounds are reversible: if you are given the initial and final states, but not the intermediate state, it is possible to compute both input words. This means that at least 3 words of input are required to create a collision. (It also has the property, used by hash_name() to avoid a branch, that it hashes all-zero to all-zero.) The rotate constants K1 and K2 were found by experiment. The search took a sample of random initial states (I used 1023) and considered the effect of flipping each of the 64 input bits on each of the 128 output bits two rounds later. Each of the 8192 pairs can be considered a biased coin, and adding up the Shannon entropy of all of them produces a score. The best-scoring shifts also did well in other tests (flipping bits in y, trying 3 or 4 rounds of mixing, flipping all 64*63/2 pairs of input bits), so the choice was made with the additional constraint that the sum of the shifts is odd and not too close to the word size. The final state is then folded into a 32-bit hash value by a less carefully optimized multiply-based scheme. This also has to be fast, as pathname components tend to be short (the most common case is one iteration!), but there's some room for latency, as there is a fair bit of intervening logic before the hash value is used for anything. (Performance verified with "bonnie++ -s 0 -n 1536:-2" on tmpfs. I need a better benchmark; the numbers seem to show a slight dip in performance between 4.6.0 and this patch, but they're too noisy to quote.) Special thanks to Bruce fields for diligent testing which uncovered a nasty fencepost error in an earlier version of this patch. [checkpatch.pl formatting complaints noted and respectfully disagreed with.] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Tested-by: J. Bruce Fields <bfields@redhat.com> 28 May 2016, 19:45:29 UTC
ef703f4 Eliminate bad hash multipliers from hash_32() and hash_64() The "simplified" prime multipliers made very bad hash functions, so get rid of them. This completes the work of 689de1d6ca. To avoid the inefficiency which was the motivation for the "simplified" multipliers, hash_64() on 32-bit systems is changed to use a different algorithm. It makes two calls to hash_32() instead. drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32 for some horrible reason, so it inherits a copy of the old definition. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Antti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> 28 May 2016, 19:42:51 UTC
92d5677 Change hash_64() return value to 32 bits That's all that's ever asked for, and it makes the return type of hash_long() consistent. It also allows (upcoming patch) an optimized implementation of hash_64 on 32-bit machines. I tried adding a BUILD_BUG_ON to ensure the number of bits requested was never more than 32 (most callers use a compile-time constant), but adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler unless tools/perf/MANIFEST is updated, and understanding that code base well enough to update it is too much trouble. I did the rest of an allyesconfig build with such a check, and nothing tripped. Signed-off-by: George Spelvin <linux@sciencehorizons.net> 28 May 2016, 19:42:51 UTC
917ea16 <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() Finally, the first use of previous two patches: eliminate the separate ad-hoc string hash functions in the sunrpc code. Now hash_str() is a wrapper around hash_string(), and hash_mem() is likewise a wrapper around full_name_hash(). Note that sunrpc code *does* call hash_mem() with a zero length, which is why the previous patch needed to handle that in full_name_hash(). (Thanks, Bruce, for finding that!) This also eliminates the only caller of hash_long which asks for more than 32 bits of output. The comment about the quality of hashlen_string() and full_name_hash() is jumping the gun by a few patches; they aren't very impressive now, but will be improved greatly later in the series. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Tested-by: J. Bruce Fields <bfields@redhat.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: linux-nfs@vger.kernel.org 28 May 2016, 19:42:50 UTC
fcfd2fb fs/namei.c: Add hashlen_string() function We'd like to make more use of the highly-optimized dcache hash functions throughout the kernel, rather than have every subsystem create its own, and a function that hashes basic null-terminated strings is required for that. (The name is to emphasize that it returns both hash and length.) It's actually useful in the dcache itself, specifically d_alloc_name(). Other uses in the next patch. full_name_hash() is also tweaked to make it more generally useful: 1) Take a "char *" rather than "unsigned char *" argument, to be consistent with hash_name(). 2) Handle zero-length inputs. If we want more callers, we don't want to make them worry about corner cases. Signed-off-by: George Spelvin <linux@sciencehorizons.net> 28 May 2016, 19:42:50 UTC
f4bcbe7 Pull out string hash to <linux/stringhash.h> ... so they can be used without the rest of <linux/dcache.h> The hashlen_* macros will make sense next patch. Signed-off-by: George Spelvin <linux@sciencehorizons.net> 28 May 2016, 19:42:40 UTC
4e8440b Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A fix for a regression introduced yesterday. The regression didn't show up here locally because I did not have PAGE_POISONING enabled. And buildbots discovered this only after it hit your tree. Thanks to Dan for the quick response" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: use after free in detach 28 May 2016, 19:38:50 UTC
a1842b2 Merge tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson "A handful of Chrome driver and binding changes this merge window: - a few patches to fix probing and configuration of pstore - a few patches adding Elan touchpad registration on a few devices - EC changes: a security fix dealing with max message sizes and addition of compat_ioctl support. - keyboard backlight control support There was also an accidential duplicate registration of trackpads on 'Leon', which was reverted just recently" * tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: Revert "platform/chrome: chromeos_laptop: Add Leon Touch" platform/chrome: chromeos_laptop - Add Elan touchpad for Wolf platform/chrome: chromeos_laptop - Add elan trackpad option for C720 platform/chrome: cros_ec_dev - Populate compat_ioctl platform/chrome: cros_ec_lightbar - use name instead of ID to hide lightbar attributes platform/chrome: cros_ec_dev - Fix security issue platform/chrome: Add Chrome OS keyboard backlight LEDs support platform/chrome: use to_platform_device() platform/chrome: pstore: Move to larger record size. platform/chrome: pstore: probe for ramoops buffer using acpi platform/chrome: chromeos_laptop: Add Leon Touch 28 May 2016, 19:32:01 UTC
0723ab4 Merge tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "This is the second update round for 4.7-rc1. Most of changes are about the pending ASoC updates and fixes, including a few new drivers. Below are some highlights: ASoC: - New drivers for MAX98371 and TAS5720 - SPI support for TLV320AIC32x4, along with the module split - TDM support for STI Uniperf IPs - Remaining topology API fixes / updates HDA: - A couple of Dell quirks and new Realtek codec support" * tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: hda - Fix headset mic detection problem for one Dell machine spi: spi-ep93xx: Fix the PTR_ERR() argument ALSA: hda/realtek - Add support for ALC295/ALC3254 ASoC: kirkwood: fix build failure ALSA: hda - Fix headphone noise on Dell XPS 13 9360 ASoC: ak4642: Enable cache usage to fix crashes on resume ASoC: twl6040: Disconnect AUX output pads on digital mute ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers rcar: src: skip disabled-SRC nodes ASoC: max98371 Remove duplicate entry in max98371_reg ASoC: twl6040: Select LPPLL during standby ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS ASoC: simple-card: Add pm callbacks to platform driver ASoC: pxa: Fix module autoload for platform drivers ASoC: topology: Fix memory leak in widget creation ASoC: Add max98371 codec driver ASoC: rsnd: count .probe/.remove for rsnd_mod_call() ASoC: topology: Check size mismatch of ABI objects before parsing ASoC: topology: Check failure to create a widget ASoC: add support for TAS5720 digital amplifier ... 28 May 2016, 19:23:12 UTC
9ba55cf Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target pending updates for v4.7-rc1. The highlights this round include: - Allow external PR/ALUA metadata path be defined at runtime via top level configfs attribute (Lee) - Fix target session shutdown bug for ib_srpt multi-channel (hch) - Make TFO close_session() and shutdown_session() optional (hch) - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref (hch) - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence) - Refactor iscsi-target RX/TX PDU encode/decode into common code (Varun) - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu, validate_parameters, and get_r2t_ttt for generic ISO offload (Varun) - Initial merge of cxgb iscsi-segment offload target driver (Varun) The bulk of the changes are Chelsio's new driver, along with a number of iscsi-target common code improvements made by Varun + Co along the way" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits) iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute iscsi-target: Convert transport drivers to signal rdma_shutdown iscsi-target: Make iscsi_tpg_np driver show/store use generic code tcm_qla2xxx Add SCSI command jammer/discard capability iscsi-target: graceful disconnect on invalid mapping to iovec target: need_to_release is always false, remove redundant check and kfree target: remove sess_kref and ->shutdown_session iscsi-target: remove usage of ->shutdown_session tcm_qla2xxx: introduce a private sess_kref target: make close_session optional target: make ->shutdown_session optional target: remove acl_stop target: consolidate and fix session shutdown cxgbit: add files for cxgbit.ko iscsi-target: export symbols iscsi-target: call complete on conn_logout_comp iscsi-target: clear tx_thread_active iscsi-target: add new offload transport type iscsi-target: use conn_transport->transport_type in text rsp ... 28 May 2016, 19:04:17 UTC
1cbe06c Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "This is the second group of code for the 4.7 merge window. It looks large, but only in one sense. I'll get to that in a minute. The list of changes here breaks down as follows: - Dynamic counter infrastructure in the IB drivers This is a sysfs based code to allow free form access to the hardware counters RDMA devices might support so drivers don't need to code this up repeatedly themselves - SendOnlyFullMember multicast support - IB router support - A couple misc fixes - The big item on the list: hfi1 driver updates, plus moving the hfi1 driver out of staging There was a group of 15 patches in the hfi1 list that I thought I had in the first pull request but they weren't. So that added to the length of the hfi1 section here. As far as these go, everything but the hfi1 is pretty straight forward. The hfi1 is, if you recall, the driver that Al had complaints about how it used the write/writev interfaces in an overloaded fashion. The write portion of their interface behaved like the write handler in the IB stack proper and did bi-directional communications. The writev interface, on the other hand, only accepts SDMA request structures. The completions for those structures are sent back via an entirely different event mechanism. With the security patch, we put security checks on the write interface, however, we also knew they would be going away soon. Now, we've converted the write handler in the hfi1 driver to use ioctls from the IB reserved magic area for its bidirectional communications. With that change, Intel has addressed all of the items originally on their TODO when they went into staging (as well as many items added to the list later). As such, I moved them out, and since they were the last item in the staging/rdma directory, and I don't have immediate plans to use the staging area again, I removed the staging/rdma area. Because of the move out of staging, as well as a series of 5 patches in the hfi1 driver that removed code people thought should be done in a different way and was optional to begin with (a snoop debug interface, an eeprom driver for an eeprom connected directory to their hfi1 chip and not via an i2c bus, and a few other things like that), the line count, especially the removal count, is high" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits) staging/rdma: Remove the entire rdma subdirectory of staging IB/core: Make device counter infrastructure dynamic IB/hfi1: Fix pio map initialization IB/hfi1: Correct 8051 link parameter settings IB/hfi1: Update pkey table properly after link down or FM start IB/rdamvt: Fix rdmavt s_ack_queue sizing IB/rdmavt: Max atomic value should be a u8 IB/hfi1: Fix hard lockup due to not using save/restore spin lock IB/hfi1: Add tracing support for send with invalidate opcode IB/hfi1, qib: Add ieth to the packet header definitions IB/hfi1: Move driver out of staging IB/hfi1: Do not free hfi1 cdev parent structure early IB/hfi1: Add trace message in user IOCTL handling IB/hfi1: Remove write(), use ioctl() for user cmds IB/hfi1: Add ioctl() interface for user commands IB/hfi1: Remove unused user command IB/hfi1: Remove snoop/diag interface IB/hfi1: Remove EPROM functionality from data device IB/hfi1: Remove UI char device IB/hfi1: Remove multiple device cdev ... 28 May 2016, 18:04:16 UTC
8d057e3 Revert "platform/chrome: chromeos_laptop: Add Leon Touch" This reverts commit bff3c624dc7261a084a4d25a0b09c3fb0fec872a. Board "Leon" is otherwise known as "Toshiba CB35" and we already have the entry that supports that board as of this commit : 963cb6f platform/chrome: chromeos_laptop - Add Toshiba CB35 Touch Remove this duplicate. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net> 28 May 2016, 15:47:48 UTC
e6be18f i2c: dev: use after free in detach The call to put_i2c_dev() frees "i2c_dev" so there is a use after free when we call cdev_del(&i2c_dev->cdev). Fixes: d6760b14d4a1 ('i2c: dev: switch from register_chrdev to cdev API') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 28 May 2016, 15:37:42 UTC
a8c5ddf MIPS: Add missing FROZEN hotplug notifier transitions The corresponding FROZEN hotplug notifier transitions used on suspend/resume are ignored. Therefore the switch case action argument is masked with the frozen hotplug notifier transition mask. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13351/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:12 UTC
bb93078 MIPS: Build microMIPS VDSO for microMIPS kernels MicroMIPS kernels may be expected to run on microMIPS only cores which don't support the normal MIPS instruction set, so be sure to pass the -mmicromips flag through to the VDSO cflags. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13349/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:12 UTC
13eb192 MIPS: Fix sigreturn via VDSO on microMIPS kernel In microMIPS kernels, handle_signal() sets the isa16 mode bit in the vdso address so that the sigreturn trampolines (which are offset from the VDSO) get executed as microMIPS. However commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") changed the offsets to come from the VDSO image, which already have the isa16 mode bit set correctly since they're extracted from the VDSO shared library symbol table. Drop the isa16 mode bit handling from handle_signal() to fix sigreturn for cores which support both microMIPS and normal MIPS. This doesn't fix microMIPS only cores, since the VDSO is still built for normal MIPS, but thats a separate problem. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13348/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:12 UTC
5214cae MIPS: devicetree: fix cpu interrupt controller node-names Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/ Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:12 UTC
94cc36b MIPS: VDSO: Build with `-fno-strict-aliasing' Avoid an aliasing issue causing a build error in VDSO: In file included from include/linux/srcu.h:34:0, from include/linux/notifier.h:15, from ./arch/mips/include/asm/uprobes.h:9, from include/linux/uprobes.h:61, from include/linux/mm_types.h:13, from ./arch/mips/include/asm/vdso.h:14, from arch/mips/vdso/vdso.h:27, from arch/mips/vdso/gettimeofday.c:11: include/linux/workqueue.h: In function 'work_static': include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing] return *work_data_bits(work) & WORK_STRUCT_STATIC; ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0. Include `-fno-strict-aliasing' along with compiler options used, as required for kernel code, fixing a problem present since the introduction of VDSO with commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO"). Thanks to Tejun for diagnosing this properly! Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Tejun Heo <tj@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.3+ Patchwork: https://patchwork.linux-mips.org/patch/13357/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:12 UTC
41cc07b MIPS: Pistachio: Enable KASLR Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:11 UTC
aedcfbe MIPS: lib: Mark intrinsics notrace On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:11 UTC
aa76042 MIPS: Fix 64-bit HTW configuration The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7537b ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:11 UTC
6446e6c MIPS: Add 64-bit HTW fields Add field definitions for some of the 64-bit specific Hardware page Table Walker (HTW) register fields in PWSize and PWCtl, in preparation for fixing the 64-bit HTW configuration. Also print these fields out along with the others in print_htw_config(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:11 UTC
f46d92e MAINTAINERS: Add file patterns for mips device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:11 UTC
7ad2410 MAINTAINERS: Add file patterns for mips brcm device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:10 UTC
5aadab0 MIPS: Simplify DSP instruction encoding macros Simplify the DSP instruction wrapper macros which use explicit encodings for microMIPS and normal MIPS by using the new encoding macros and removing duplication. To me this makes it easier to read since it is much shorter, but it also ensures .insn is used, preventing objdump disassembling the microMIPS code as normal MIPS. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13314/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:10 UTC
c84700c MIPS: Add missing tlbinvf/XPA microMIPS encodings Hardcoded MIPS instruction encodings are provided for tlbinvf, mfhc0 & mthc0 instructions, but microMIPS encodings are missing. I doubt any microMIPS cores exist at present which support these instructions, but the microMIPS encodings exist, and microMIPS cores may support them in the future. Add the missing microMIPS encodings using the new macros. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:10 UTC
6e1b29c MIPS: Fix little endian microMIPS MSA encodings When the toolchain doesn't support MSA we encode MSA instructions explicitly in assembly. Unfortunately we use .word for both MIPS and microMIPS encodings which is wrong, since 32-bit microMIPS instructions are made up from a pair of halfwords. - The most significant halfword always comes first, so for little endian builds the halves will be emitted in the wrong order. - 32-bit alignment isn't guaranteed, so the assembler may insert a 16-bit nop instruction to pad the instruction stream to a 32-bit boundary. Use the new instruction encoding macros to encode microMIPS MSA instructions correctly. Fixes: d96cc3d1ec5d ("MIPS: Add microMIPS MSA support.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:10 UTC
1c48a17 MIPS: Add missing VZ accessor microMIPS encodings Toolchains may be used which support microMIPS but not VZ instructions (i.e. binutis 2.22 & 2.23), so extend the explicitly encoded versions of the guest COP0 register & guest TLB access macros to support microMIPS encodings too, using the new macros. This prevents non-microMIPS instructions being executed in microMIPS mode during CPU probe on cores supporting VZ (e.g. M5150), which cause reserved instruction exceptions early during boot. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13311/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:10 UTC
0dfa1c1 MIPS: Add inline asm encoding helpers To allow simplification of macros which use inline assembly to explicitly encode instructions, add a few simple abstractions to mipsregs.h which expand to specific microMIPS or normal MIPS encodings depending on what type of kernel is being built: _ASM_INSN_IF_MIPS(_enc) : Emit a 32bit MIPS instruction if microMIPS is not enabled. _ASM_INSN32_IF_MM(_enc) : Emit a 32bit microMIPS instruction if enabled. _ASM_INSN16_IF_MM(_enc) : Emit a 16bit microMIPS instruction if enabled. The macros can be used one after another since the MIPS / microMIPS macros are mutually exclusive, for example: __asm__ __volatile__( ".set push\n\t" ".set noat\n\t" "# mfgc0 $1, $%1, %2\n\t" _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) "move %0, $1\n\t" ".set pop" : "=r" (__res) : "i" (source), "i" (sel)); Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13310/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:09 UTC
4939788 MIPS: Spelling fix lets -> let's As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> 28 May 2016, 10:35:09 UTC
a320a11 MIPS: VR41xx: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:09 UTC
5004614 MIPS: oprofile: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: rric@kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/13334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:09 UTC
e7e3346 MIPS: math-emu: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: macro@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:09 UTC
209b877 MIPS: lib: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:08 UTC
a90c59e MIPS: kernel: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: paul.burton@imgtec.com Cc: macro@imgtec.com Cc: james.hogan@imgtec.com Cc: jslaby@suse.cz Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:08 UTC
f5be47f MIPS: R6: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: macro@imgtec.com Cc: paul.burton@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:08 UTC
a9e7e45 MIPS: IP22/IP28: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:08 UTC
da66f8e MIPS: Cavium: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: david.daney@cavium.com Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13324/ Patchwork: https://patchwork.linux-mips.org/patch/13325/ Patchwork: https://patchwork.linux-mips.org/patch/13326/ Patchwork: https://patchwork.linux-mips.org/patch/13327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:07 UTC
7a448b5 MIPS: MT: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:07 UTC
fb0f6e8 MIPS: Loongson64: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: chenhc@lemote.com Cc: viresh.kumar@linaro.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13322/ Patchwork: https://patchwork.linux-mips.org/patch/13332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:07 UTC
dc3c273 MIPS: IP32: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:07 UTC
87fd4e2 MIPS: IP27: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13320/ Patchwork: https://patchwork.linux-mips.org/patch/13335/ Patchwork: https://patchwork.linux-mips.org/patch/13336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:07 UTC
e904b94 MIPS: BCM63xx: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:06 UTC
be9fde2 MIPS: Alchemy: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13318/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:06 UTC
20430e7 MIPS: hazards.h: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: chenhc@lemote.com Cc: james.hogan@imgtec.com Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13317/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:06 UTC
9b987c4 MIPS: Lasat: A couple off by one bugs in picvue_proc.c These should be ">=" instead of ">" or we go past the end of the pvc_lines[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6124/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:06 UTC
2b436a3 MIPS: ralink: add MT7628 EPHY LEDs pinmux support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13308/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:05 UTC
07b50db MIPS: ralink: fix MT7628 wled_an pinmux gpio Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13307/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:05 UTC
d714682 MIPS: ralink: fix MT7628 pinmux typos Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13306/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:05 UTC
f03984c MIPS: Fix write_gc0_* macros when writing zero The versions of the __write_{32,64}bit_gc0_register() macros for when there is no virt support in the assembler use the "J" inline asm constraint to allow integer zero, but this needs to be accompanied by the "z" formatting string so that it turns into $0. Fix both macros to do this. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:05 UTC
63a8802 MIPS: CPS: Copy EVA configuration when starting secondary VPs. When starting secondary VPEs which support EVA and the SegCtl registers, copy the memory segmentation configuration from the running VPE to ensure that all VPEs in the core have a consistent virtual memory map. The EVA configuration of secondary cores is dealt with when starting the core via the CM. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13291/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:05 UTC
5c33f8b MIPS: Add definitions of SegCtl registers and use them The SegCtl registers are standard for MIPSr3..MIPSr5. Add definitions of these registers and use them rather than constants Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Chris Packham <judge.packham@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13290/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:04 UTC
dd31740 dt/bindings: Correct clk binding example for PIC32 gpio. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: linux-gpio@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13270/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:04 UTC
761e52b dt/bindings: Correct clk binding example for PIC32 WDT. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13269/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:04 UTC
58c3768 dt/bindings: Correct clk binding example for PIC32 DMT. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13268/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:04 UTC
9c719d8 dt/bindings: Correct clk binding example for PIC32 serial. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Andrei Pistirica <andrei.pistirica@microchip.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13267/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:04 UTC
82cc37f dt/bindings: Correct clk binding example for PIC32 pinctrl Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13266/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:04 UTC
684b23c dt/bindings: Correct clk binding example for PIC32 SDHCI Update binding example based on new clock binding documentation. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Andrei Pistirica <andrei.pistirica@microchip.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13265/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:03 UTC
0f2d988 MIPS: Fix incomplete separation of XPA CPU feature Commit 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH") wasn't fully applied, possibly due to a conflict with commit f270d881fa55 ("MIPS: Detect MIPSr6 Virtual Processor support"). This left decode_config5() referring to the non-existent MIPS_CPU_XPA, which breaks the build when XPA is enabled: arch/mips/kernel/cpu-probe.c In function ‘decode_config5’: arch/mips/kernel/cpu-probe.c:838:17: error: ‘MIPS_CPU_XPA’ undeclared (first use in this function) c->options |= MIPS_CPU_XPA; ^ Apply the missing hunk, dropping the CONFIG_XPA ifdef and setting the MIPS_CPU_MVH option when Config5.MVH is set. Fixes: 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Link: https://patchwork.linux-mips.org/patch/13112/ Patchwork: https://patchwork.linux-mips.org/patch/13277/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:03 UTC
ba01cf0 irqchip: mips-gic: Setup EIC mode on each CPU if it's in use When EIC mode is in use (cpu_has_veic is true) enable it on each CPU during GIC initialisation. Otherwise there may be a mismatch between the hardware default interrupt model & that expected by the kernel. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13274/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:03 UTC
d642e4e MIPS: smp-cps: Clear Status IPL field when using EIC When using an external interrupt controller (EIC) the interrupt mask bits in the cop0 Status register are reused for the Interrupt Priority Level, and any interrupts with a priority lower than the field will be ignored. Clear the field to 0 by default such that all interrupts are serviced. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13273/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:03 UTC
640356a MIPS: Clear Status IPL field when using EIC When using an external interrupt controller (EIC) the interrupt mask bits in the cop0 Status register are reused for the Interrupt Priority Level, and any interrupts with a priority lower than the field will be ignored. Clear the field to 0 by default such that all interrupts are serviced. Without doing so we default to arbitrarily ignoring all or some subset of interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Joe Perches <joe@perches.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13272/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 28 May 2016, 10:35:02 UTC
ed2608f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input subsystem updates from Dmitry Torokhov: "Just a few more driver fixes; new drivers will be coming in the next merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pwm-beeper - fix - scheduling while atomic Input: xpad - xbox one elite controller support Input: xpad - add more third-party controllers Input: xpad - prevent spurious input from wired Xbox 360 controllers Input: xpad - move pending clear to the correct location Input: uinput - handle compat ioctl for UI_SET_PHYS 28 May 2016, 02:14:35 UTC
06d2e78 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Here is the second pull request from I2C for this merge window: - one new feature (which nearly fell through the cracks): i2c-dev does now use the cdev API so it can handle >256 minors. Seems people do need that. - two fixes for the just added DMA feature for i2c-rcar - some typo fixes" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: don't start function name with 'return' i2c: dev: switch from register_chrdev to cdev API i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO i2c: at91: change log when dma configuration fails misc: at24: Fix typo in at24 header file i2c: rcar: should depend on HAS_DMA i2c: rcar: use dma_request_chan() 28 May 2016, 02:07:10 UTC
7d8eb50 Merge branch 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "This contains a nice FPU fixup from Eli Cooper for UML" * 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: add extended processor state save/restore support um: extend fpstate to _xstate to support YMM registers um: fix FPU state preservation around signal handlers 28 May 2016, 01:54:59 UTC
23a3e17 Merge tag 'upstream-4.7-rc1' of git://git.infradead.org/linux-ubifs Pull UBI/UBIFS updates from Richard Weinberger: "This contains mostly cleanups and minor improvements of UBI and UBIFS" * tag 'upstream-4.7-rc1' of git://git.infradead.org/linux-ubifs: ubifs: ubifs_dump_inode: Fix dumping field bulk_read UBI: Fix static volume checks when Fastmap is used UBI: Set free_count to zero before walking through erase list UBI: Silence an unintialized variable warning UBI: Clean up return in ubi_remove_volume() UBI: Modify wrong comment in ubi_leb_map function. UBI: Don't read back all data in ubi_eba_copy_leb() UBI: Add ro-mode sysfs attribute 28 May 2016, 01:49:29 UTC
e0714ec nfs: fix anonymous member initializer build failure with older compilers Older versions of gcc don't understand named initializers inside a anonymous structure or union member. It can be worked around by adding the bracin gin the initializer for the anonymous member. Without this, gcc 4.4.4 will fail the build with CC fs/nfs/nfs4state.o fs/nfs/nfs4state.c:69: error: unknown field ‘data’ specified in initializer fs/nfs/nfs4state.c:69: warning: missing braces around initializer fs/nfs/nfs4state.c:69: warning: (near initialization for ‘zero_stateid.<anonymous>.data’) make[2]: *** [fs/nfs/nfs4state.o] Error 1 introduced in commit 93b717fd81bf ("NFSv4: Label stateids with the type") Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Anna Schumaker <Anna.Schumaker@netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 May 2016, 00:20:27 UTC
d102a56 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Followups to the parallel lookup work: - update docs - restore killability of the places that used to take ->i_mutex killably now that we have down_write_killable() merged - Additionally, it turns out that I missed a prerequisite for security_d_instantiate() stuff - ->getxattr() wasn't the only thing that could be called before dentry is attached to inode; with smack we needed the same treatment applied to ->setxattr() as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch ->setxattr() to passing dentry and inode separately switch xattr_handler->set() to passing dentry and inode separately restore killability of old mutex_lock_killable(&inode->i_mutex) users add down_write_killable_nested() update D/f/directory-locking 28 May 2016, 00:14:05 UTC
3767e25 switch ->setxattr() to passing dentry and inode separately smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e64. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 28 May 2016, 00:09:16 UTC
0121a32 Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: "The meat of this is a change to use the mounter's credentials for operations that require elevated privileges (such as whiteout creation). This fixes behavior under user namespaces as well as being a nice cleanup" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: Do d_type check only if work dir creation was successful ovl: update documentation ovl: override creds with the ones from the superblock mounter 27 May 2016, 23:44:39 UTC
f49cf3b Input: pwm-beeper - fix - scheduling while atomic Pwm config may sleep so defer it using a worker. On a Freescale i.MX53 based board we ran into "BUG: scheduling while atomic" because input_inject_event locks interrupts, but imx_pwm_config_v2 sleeps. Tested on Freescale i.MX53 SoC with 4.6.0. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 27 May 2016, 23:40:30 UTC
559b6d9 Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs cleanups and fixes from Chris Mason: "We have another round of fixes and a few cleanups. I have a fix for short returns from btrfs_copy_from_user, which finally nails down a very hard to find regression we added in v4.6. Dave is pushing around gfp parameters, mostly to cleanup internal apis and make it a little more consistent. The rest are smaller fixes, and one speelling fixup patch" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (22 commits) Btrfs: fix handling of faults from btrfs_copy_from_user btrfs: fix string and comment grammatical issues and typos btrfs: scrub: Set bbio to NULL before calling btrfs_map_block Btrfs: fix unexpected return value of fiemap Btrfs: free sys_array eb as soon as possible btrfs: sink gfp parameter to convert_extent_bit btrfs: make state preallocation more speculative in __set_extent_bit btrfs: untangle gotos a bit in convert_extent_bit btrfs: untangle gotos a bit in __clear_extent_bit btrfs: untangle gotos a bit in __set_extent_bit btrfs: sink gfp parameter to set_record_extent_bits btrfs: sink gfp parameter to set_extent_new btrfs: sink gfp parameter to set_extent_defrag btrfs: sink gfp parameter to set_extent_delalloc btrfs: sink gfp parameter to clear_extent_dirty btrfs: sink gfp parameter to clear_record_extent_bits btrfs: sink gfp parameter to clear_extent_bits btrfs: sink gfp parameter to set_extent_bits btrfs: make find_workspace warn if there are no workspaces btrfs: make find_workspace always succeed ... 27 May 2016, 23:37:36 UTC
6f49a39 Input: xpad - xbox one elite controller support added the according id and incresed XPAD_PKT_LEN to 64 as the elite controller sends at least 33 byte messages [1]. Verified to be working by [2]. [1]: https://franticrain.github.io/sniffs/XboxOneSniff.html [2]: https://github.com/paroj/xpad/issues/23 Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 27 May 2016, 23:32:49 UTC
6538c3b Input: xpad - add more third-party controllers Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by: Thomas Debesse <dev@illwieckz.net> Signed-off-by: aronschatz <aronschatz@aselabs.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 27 May 2016, 23:32:48 UTC
1ff5fa3 Input: xpad - prevent spurious input from wired Xbox 360 controllers After initially connecting a wired Xbox 360 controller or sending it a command to change LEDs, a status/response packet is interpreted as controller input. This causes the state of buttons represented in byte 2 of the controller data packet to be incorrect until the next valid input packet. Wireless Xbox 360 controllers are not affected. Writing a new value to the LED device while holding the Start button and running jstest is sufficient to reproduce this bug. An event will come through with the Start button released. Xboxdrv also won't attempt to read controller input from a packet where byte 0 is non-zero. It also checks that byte 1 is 0x14, but that value differs between wired and wireless controllers and this code is shared by both. I think just checking byte 0 is enough to eliminate unwanted packets. The following are some examples of 3-byte status packets I saw: 01 03 02 02 03 00 03 03 03 08 03 00 Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 27 May 2016, 23:32:47 UTC
4efc693 Input: xpad - move pending clear to the correct location otherwise we lose ff commands: https://github.com/paroj/xpad/issues/27 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 27 May 2016, 23:32:46 UTC
aa00edc make IS_ERR_VALUE() complain about non-pointer-sized arguments Now that the allmodconfig x86-64 build is clean wrt IS_ERR_VALUE() uses on integers, add a cast to a pointer and back to the argument, so that any new mis-uses of IS_ERR_VALUE() will cause warnings like warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] so that we don't re-introduce any bogus uses. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 23:03:22 UTC
5d22fc2 mm: remove more IS_ERR_VALUE abuses The do_brk() and vm_brk() return value was "unsigned long" and returned the starting address on success, and an error value on failure. The reasons are entirely historical, and go back to it basically behaving like the mmap() interface does. However, nobody actually wanted that interface, and it causes totally pointless IS_ERR_VALUE() confusion. What every single caller actually wants is just the simpler integer return of zero for success and negative error number on failure. So just convert to that much clearer and more common calling convention, and get rid of all the IS_ERR_VALUE() uses wrt vm_brk(). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 22:57:31 UTC
287980e remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 22:26:11 UTC
7ded384 mm: fix section mismatch warning The register_page_bootmem_info_node() function needs to be marked __init in order to avoid a new warning introduced by commit f65e91df25aa ("mm: use early_pfn_to_nid in register_page_bootmem_info_node"). Otherwise you'll get a warning about how a non-init function calls early_pfn_to_nid (which is __meminit) Cc: Yang Shi <yang.shi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 22:23:32 UTC
af7d937 Merge branch 'akpm' (patches from Andrew) Merge misc updates and fixes from Andrew Morton: - late-breaking ocfs2 updates - random bunch of fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: disable DEFERRED_STRUCT_PAGE_INIT on !NO_BOOTMEM mm/memcontrol.c: move comments for get_mctgt_type() to proper position mm/memcontrol.c: fix the margin computation in mem_cgroup_margin() mm/cma: silence warnings due to max() usage mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap() oom_reaper: close race with exiting task mm: use early_pfn_to_nid in register_page_bootmem_info_node mm: use early_pfn_to_nid in page_ext_init MAINTAINERS: Kdump maintainers update MAINTAINERS: add kexec_core.c and kexec_file.c mm: oom: do not reap task if there are live threads in threadgroup direct-io: fix direct write stale data exposure from concurrent buffered read ocfs2: bump up o2cb network protocol version ocfs2: o2hb: fix hb hung time ocfs2: o2hb: don't negotiate if last hb fail ocfs2: o2hb: add some user/debug log ocfs2: o2hb: add NEGOTIATE_APPROVE message ocfs2: o2hb: add NEGO_TIMEOUT message ocfs2: o2hb: add negotiate timer 27 May 2016, 21:56:59 UTC
11e6856 mm: disable DEFERRED_STRUCT_PAGE_INIT on !NO_BOOTMEM When we have !NO_BOOTMEM, the deferred page struct initialization doesn't work well because the pages reserved in bootmem are released to the page allocator uncoditionally. It causes memory corruption and system crash eventually. As Mel suggested, the bootmem is retiring slowly. We fix the issue by simply hiding DEFERRED_STRUCT_PAGE_INIT when bootmem is enabled. Link: http://lkml.kernel.org/r/1460602170-5821-1-git-send-email-gwshan@linux.vnet.ibm.com Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 21:49:37 UTC
7cf7806 mm/memcontrol.c: move comments for get_mctgt_type() to proper position Move the comments for get_mctgt_type() to be before get_mctgt_type() implementation. Link: http://lkml.kernel.org/r/1463644638-7446-1-git-send-email-roy.qing.li@gmail.com Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 21:49:37 UTC
cbedbac mm/memcontrol.c: fix the margin computation in mem_cgroup_margin() mem_cgroup_margin() might return (memory.limit - memory_count) when the memsw.limit is in excess. This doesn't happen usually because we do not allow excess on hard limits and (memory.limit <= memsw.limit), but __GFP_NOFAIL charges can force the charge and cause the excess when no memory is really swappable (swap is full or no anonymous memory is left). [mhocko@suse.com: rewrote changelog] Link: http://lkml.kernel.org/r/20160525155122.GK20132@dhcp22.suse.cz Link: http://lkml.kernel.org/r/1464068266-27736-1-git-send-email-roy.qing.li@gmail.com Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 21:49:37 UTC
badbda5 mm/cma: silence warnings due to max() usage pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long, ...) when comparing it. fixes these warnings: In file included from include/asm-generic/bug.h:13:0, from arch/powerpc/include/asm/bug.h:127, from include/linux/bug.h:4, from include/linux/mmdebug.h:4, from include/linux/mm.h:8, from include/linux/memblock.h:18, from mm/cma.c:28: mm/cma.c: In function 'cma_init_reserved_mem': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ mm/cma.c:186:27: note: in expansion of macro 'max' alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); ^ mm/cma.c: In function 'cma_declare_contiguous': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:9: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:21: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.au Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 21:49:37 UTC
0798d3c mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap() If page_move_anon_rmap() is refiling a pmd-splitted THP mapped in a tail page from a pte, the "address" must be THP aligned in order for the page->index bugcheck to pass in the CONFIG_DEBUG_VM=y builds. Link: http://lkml.kernel.org/r/1464253620-106404-1-git-send-email-kirill.shutemov@linux.intel.com Fixes: 6d0a07edd17c ("mm: thp: calculate the mapcount correctly for THP pages during WP faults") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.5] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 21:49:37 UTC
e2fe145 oom_reaper: close race with exiting task Tetsuo has reported: Out of memory: Kill process 443 (oleg's-test) score 855 or sacrifice child Killed process 443 (oleg's-test) total-vm:493248kB, anon-rss:423880kB, file-rss:4kB, shmem-rss:0kB sh invoked oom-killer: gfp_mask=0x24201ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD), order=0, oom_score_adj=0 sh cpuset=/ mems_allowed=0 CPU: 2 PID: 1 Comm: sh Not tainted 4.6.0-rc7+ #51 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 Call Trace: dump_stack+0x85/0xc8 dump_header+0x5b/0x394 oom_reaper: reaped process 443 (oleg's-test), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB In other words: __oom_reap_task exit_mm atomic_inc_not_zero tsk->mm = NULL mmput atomic_dec_and_test # > 0 exit_oom_victim # New victim will be # selected <OOM killer invoked> # no TIF_MEMDIE task so we can select a new one unmap_page_range # to release the memory The race exists even without the oom_reaper because anybody who pins the address space and gets preempted might race with exit_mm but oom_reaper made this race more probable. We can address the oom_reaper part by using oom_lock for __oom_reap_task because this would guarantee that a new oom victim will not be selected if the oom reaper might race with the exit path. This doesn't solve the original issue, though, because somebody else still might be pinning mm_users and so __mmput won't be called to release the memory but that is not really realiably solvable because the task will get away from the oom sight as soon as it is unhashed from the task_list and so we cannot guarantee a new victim won't be selected. [akpm@linux-foundation.org: fix use of unused `mm', Per Stephen] [akpm@linux-foundation.org: coding-style fixes] Fixes: aac453635549 ("mm, oom: introduce oom reaper") Link: http://lkml.kernel.org/r/1464271493-20008-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 May 2016, 21:49:37 UTC
back to top