Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
c8d2bc9 Linus Torvalds 02 October 2016, 23:24:33 UTC Linux 4.8 02 October 2016, 23:24:33 UTC
f76d9c6 Linus Torvalds 02 October 2016, 22:23:00 UTC Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Three relatively small fixes for ARM: - Roger noticed that dma_max_pfn() was calculating the upper limit wrongly, by adding the PFN offset of memory twice. - A fix from Robin to correct parsing of MPIDR values when the address size is larger than one BE32 unit. - A fix from Srinivas to ensure that we do not rely on the boot loader (or previous Linux kernel) setting the translation table base register a certain way in the decompressor, which can lead to crashes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 ARM: 8617/1: dma: fix dma_max_pfn() ARM: 8616/1: dt: Respect property size when parsing CPUs 02 October 2016, 22:23:00 UTC
117e5e9 Srinivas Ramana 30 September 2016, 14:03:31 UTC ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece45894d3a ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 02 October 2016, 19:05:14 UTC
be67d60 Linus Torvalds 02 October 2016, 18:04:29 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "The last regression fixes for 4.8 final: - Two patches addressing the fallout of the CR4 optimizations which caused CR4-less machines to fail. - Fix the VDSO build on big endian machines - Take care of FPU initialization if no CPUID is available otherwise task struct size ends up being zero - Fix up context tracking in case load_gs_index fails" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 x86/init: Fix cr4_init_shadow() on CR4-less machines 02 October 2016, 18:04:29 UTC
66188fb Linus Torvalds 02 October 2016, 17:53:38 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Another round of fixes: - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems - CPS: Avoid BUG() when offlining pre-r6 CPUs - DEC: Avoid gas warnings due to suspicious instruction scheduling by manually expanding assembler macros. - FTLB: Fix configuration by moving confiuguratoin after probing - FTLB: clear execution hazard after changing FTLB enable - Highmem: Fix detection of unsupported highmem with cache aliases - I6400: Don't touch FTLBP chicken bits - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE - Malta: Fix IOCU disable switch read for MIPS64 - Octeon: Fix probing of devices attached to GPIO lines - uprobes: Misc small fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS MIPS: clear execution hazard after changing FTLB enable MIPS: Configure FTLB after probing TLB sizes from config4 MIPS: Stop setting I6400 FTLBP MIPS: DEC: Avoid la pseudo-instruction in delay slots MIPS: Octeon: mark GPIO controller node not populated after IRQ init. MIPS: uprobes: fix use of uninitialised variable MIPS: uprobes: remove incorrect set_orig_insn MIPS: fix uretprobe implementation MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs 02 October 2016, 17:53:38 UTC
0c7fc30 Linus Torvalds 02 October 2016, 17:42:26 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: 1) Fix section mismatches in some builds, from Paul Gortmaker. 2) Need to count huge zero page mappings when doing TSB sizing, from Mike Kravetz. 3) Fix handing of cpu_possible_mask when nr_cpus module option is specified, from Atish Patra. 4) Don't allocate irq stacks until nr_irqs has been processed, also from Atish Patra. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix non-SMP build. sparc64: Fix irq stack bootmem allocation. sparc64: Fix cpu_possible_mask if nr_cpus is set sparc64 mm: Fix more TSB sizing issues sparc64: fix section mismatch in find_numa_latencies_for_group 02 October 2016, 17:42:26 UTC
bb6bbc7 Linus Torvalds 02 October 2016, 17:36:41 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix wrong TCP checksums on MTU probing when checksum offloading is disabled, from Douglas Caetano dos Santos. 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang. 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(), fix from Lance Richardson. 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6, fix from Nikolay Aleksandrov. 5) Fix packet alignment in fec driver, from Eric Nelson. 6) Fix perf regression in sctp due to struct layout and cache misses, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() act_ife: Fix false encoding act_ife: Fix external mac header on encode VSOCK: Don't dec ack backlog twice for rejected connections Revert "net: ethernet: bcmgenet: use phydev from struct net_device" net: fec: align IP header in hardware net: fec: remove QUIRK_HAS_RACC from i.mx27 net: fec: remove QUIRK_HAS_RACC from i.mx25 ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() tcp: fix a compile error in DBGUNDO() tcp: fix wrong checksum calculation on MTU probing sch_sfb: keep backlog updated with qlen sch_qfq: keep backlog updated with qlen can: dev: fix deadlock reported after bus-off 02 October 2016, 17:36:41 UTC
6605d15 Paul Burton 30 September 2016, 16:25:01 UTC MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems When discovering the number of VPEs per core, smp_num_siblings will be incorrect for kernels built without support for the MIPS MultiThreading (MT) ASE running on systems which implement said ASE. This leads to accesses to VPEs in secondary cores being performed incorrectly since mips_cm_vp_id calculates the wrong ID to write to the local "other" registers. Fix this by examining the number of VPEs in the core as reported by the CM. This patch presumes that the number of VPEs will be the same in each core of the system. As this path only applies to systems with CM version 2.5 or lower, and this property is true of all such known systems, this is likely to be fine but is described in a comment for good measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 01 October 2016, 23:40:56 UTC
f51fdff Linus Torvalds 01 October 2016, 14:37:15 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One final fix before 4.8. There was a memory leak triggered by turning scsi mq off due to the fact that we assume on host release that the already running hosts weren't mq based because that's the state of the global flag (even though they were). Fix it by tracking this on a per host host basis" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Avoid that toggling use_blk_mq triggers a memory leak 01 October 2016, 14:37:15 UTC
2161a2a Linus Torvalds 01 October 2016, 04:25:09 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks 01 October 2016, 04:25:09 UTC
dbd8805 Linus Torvalds 30 September 2016, 22:51:10 UTC Merge branch 'akpm' (patches from Andrew) Merge more fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() 30 September 2016, 22:51:10 UTC
37aa727 John Youn 30 September 2016, 22:11:35 UTC include/linux/property.h: fix typo/compile error This fixes commit d76eebfa175e ("include/linux/property.h: fix build issues with gcc-4.4.4"). With that commit we get the following compile error when using the PROPERTY_ENTRY_INTEGER_ARRAY macro. include/linux/property.h:201:39: error: `u32_data' undeclared (first use in this function) PROPERTY_ENTRY_INTEGER_ARRAY(_name_, u32, _val_) ^ include/linux/property.h:193:17: note: in definition of macro `PROPERTY_ENTRY_INTEGER_ARRAY' { .pointer = { _type_##_data = _val_ } }, \ ^ This needs a '.' to reference the union member. It seems this was just overlooked here since it is done correctly in similar constructs in other parts of the original commit. This fix is in preparation of upcoming commits that will use this macro. Fixes: commit d76eebfa175e ("include/linux/property.h: fix build issues with gcc-4.4.4") Link: http://lkml.kernel.org/r/2de3b929290d88a723ed829a3e3cbd02044714df.1475114627.git.johnyoun@synopsys.com Signed-off-by: John Youn <johnyoun@synopsys.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2016, 22:26:52 UTC
c33f078 Eric Ren 30 September 2016, 22:11:32 UTC ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally. In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it; there are 2 process repeatedly performing the following operations respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a', 1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then ftruncate(fd, CLUSTER_SIZE) again and again. This is the backtrace when the deadlock happens: __wait_on_bit_lock+0x50/0xa0 __lock_page+0xb7/0xc0 ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2] ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2] do_page_mkwrite+0x66/0xc0 handle_mm_fault+0x685/0x1350 __do_page_fault+0x1d8/0x4d0 trace_do_page_fault+0x37/0xf0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 In ocfs2_write_begin_nolock(), we first grab the pages and then allocate disk space for this write; ocfs2_try_to_free_truncate_log() will be called if -ENOSPC is returned; if we're lucky to get enough clusters, which is usually the case, we start over again. But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we will deadlock when trying to grab the target page again. Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write(). Another deadlock will happen in __do_page_mkwrite() if ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a locked target page. These two errors fail on the same path, so fix them by unlocking the target page manually before ocfs2_free_write_ctxt(). Jan Kara helps me clear out the JBD2 part, and suggest the hint for root cause. Changes since v1: 1. Also put ENOMEM error case into consideration. Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: He Gang <ghe@suse.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2016, 22:26:52 UTC
22f2ac5 Johannes Weiner 30 September 2016, 22:11:29 UTC mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() Antonio reports the following crash when using fuse under memory pressure: kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346! invalid opcode: 0000 [#1] SMP Modules linked in: all of them CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000 RIP: shadow_lru_isolate+0x181/0x190 Call Trace: __list_lru_walk_one.isra.3+0x8f/0x130 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x34/0x50 shrink_slab.part.40+0x1ed/0x3d0 shrink_zone+0x2ca/0x2e0 kswapd+0x51e/0x990 kthread+0xd8/0xf0 ret_from_fork+0x3f/0x70 which corresponds to the following sanity check in the shadow node tracking: BUG_ON(node->count & RADIX_TREE_COUNT_MASK); The workingset code tracks radix tree nodes that exclusively contain shadow entries of evicted pages in them, and this (somewhat obscure) line checks whether there are real pages left that would interfere with reclaim of the radix tree node under memory pressure. While discussing ways how fuse might sneak pages into the radix tree past the workingset code, Miklos pointed to replace_page_cache_page(), and indeed there is a problem there: it properly accounts for the old page being removed - __delete_from_page_cache() does that - but then does a raw raw radix_tree_insert(), not accounting for the replacement page. Eventually the page count bits in node->count underflow while leaving the node incorrectly linked to the shadow node LRU. To address this, make sure replace_page_cache_page() uses the tracked page insertion code, page_cache_tree_insert(). This fixes the page accounting and makes sure page-containing nodes are properly unlinked from the shadow node LRU again. Also, make the sanity checks a bit less obscure by using the helpers for checking the number of pages and shadows in a radix tree node. Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Antonio SJ Musumeci <trapexit@spawn.link> Debugged-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2016, 22:26:52 UTC
9a2172a Javi Merino 30 September 2016, 12:14:28 UTC MAINTAINERS: Switch to kernel.org email address for Javi Merino Change my email address to my kernel.org account instead of the ARM one. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2016, 17:45:11 UTC
2fa5f04 Wanpeng Li 30 September 2016, 01:01:06 UTC x86/entry/64: Fix context tracking state warning when load_gs_index fails This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 30 September 2016, 11:53:12 UTC
05fb3c1 Andy Lutomirski 28 September 2016, 23:06:33 UTC x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by: David Saggiorato <david@saggiorato.net> Tested-by: David Saggiorato <david@saggiorato.net> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 30 September 2016, 11:53:04 UTC
e4aad64 Segher Boessenkool 29 September 2016, 11:51:00 UTC x86/vdso: Fix building on big endian host We need to call GET_LE to read hdr->e_type. Fixes: 57f90c3dfc75 ("x86/vdso: Error out if the vDSO isn't a valid DSO") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-next@vger.kernel.org Link: http://lkml.kernel.org/r/20160929193442.GA16617@gate.crashing.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 30 September 2016, 10:37:40 UTC
192d1dc Andy Lutomirski 29 September 2016, 19:48:11 UTC x86/boot: Fix another __read_cr4() case on 486 The condition for reading CR4 was wrong: there are some CPUs with CPUID but not CR4. Rather than trying to make the condition exact, use __read_cr4_safe(). Fixes: 18bc7bd523e0 ("x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly") Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/8c453a61c4f44ab6ff43c29780ba04835234d2e5.1475178369.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 30 September 2016, 10:37:40 UTC
1cceda7 Xin Long 28 September 2016, 18:55:44 UTC sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock When sctp dumps all the ep->assocs, it needs to lock_sock first, but now it locks sock in rcu_read_lock, and lock_sock may sleep, which would break rcu_read_lock. This patch is to get and hold one sock when traversing the list. After that and get out of rcu_read_lock, lock and dump it. Then it will traverse the list again to get the next one until all sctp socks are dumped. For sctp_diag_dump_one, it fixes this issue by holding asoc and moving cb() out of rcu_read_lock in sctp_transport_lookup_process. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2016, 06:08:57 UTC
75b005b David S. Miller 30 September 2016, 06:07:10 UTC Merge branch 'sctp-fixes' Xin Long says: ==================== sctp: a bunch of fixes for prsctp polices This patchset is to fix 2 issues for prsctp polices: 1. patch 1 and 2 fix "netperf-Throughput_Mbps -37.2% regression" issue when overloading the CPU. 2. patch 3 fix "prsctp polices should check both sides' prsctp_capable, instead of only local side". ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2016, 06:07:10 UTC
be4947b Xin Long 28 September 2016, 18:37:28 UTC sctp: change to check peer prsctp_capable when using prsctp polices Now before using prsctp polices, sctp uses asoc->prsctp_enable to check if prsctp is enabled. However asoc->prsctp_enable is set only means local host support prsctp, sctp should not abandon packet if peer host doesn't enable prsctp. So this patch is to use asoc->peer.prsctp_capable to check if prsctp is enabled on both side, instead of asoc->prsctp_enable, as asoc's peer.prsctp_capable is set only when local and peer both enable prsctp. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2016, 06:07:05 UTC
0605483 Xin Long 28 September 2016, 18:37:27 UTC sctp: remove prsctp_param from sctp_chunk Now sctp uses chunk->prsctp_param to save the prsctp param for all the prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk. We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices, and reuse msg->expires_at for TTL policy, as the prsctp polices and old expires policy are mutual exclusive. This patch is to remove prsctp_param from sctp_chunk, and reuse msg's expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF polices. Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy, as it needs a u64 variables to save the expires_at time. This one also fixes the "netperf-Throughput_Mbps -37.2% regression" issue. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2016, 06:07:05 UTC
73dca12 Xin Long 28 September 2016, 18:37:26 UTC sctp: move sent_count to the memory hole in sctp_chunk Now pahole sctp_chunk, it has 2 memory holes: struct sctp_chunk { struct list_head list; atomic_t refcnt; /* XXX 4 bytes hole, try to pack */ ... long unsigned int prsctp_param; int sent_count; /* XXX 4 bytes hole, try to pack */ This patch is to move up sent_count to fill the 1st one and eliminate the 2nd one. It's not just another struct compaction, it also fixes the "netperf- Throughput_Mbps -37.2% regression" issue when overloading the CPU. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2016, 06:07:05 UTC
1b0ff89 Milton Miller 29 September 2016, 16:24:08 UTC tg3: Avoid NULL pointer dereference in tg3_io_error_detected() While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 September 2016, 05:27:27 UTC
e3b3656 Linus Torvalds 30 September 2016, 03:16:57 UTC Merge tag 'drm-fixes-for-v4.8-final' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "drm fixes for final 4.8. One big regression fix for udl, along with two amdgpu fixes and two nouveau fixes. All seems pretty safe and useful" * tag 'drm-fixes-for-v4.8-final' of git://people.freedesktop.org/~airlied/linux: drm/udl: fix line iterator in damage handling drm/radeon/si/dpm: add workaround for for Jet parts drm/amdgpu: disable CRTCs before teardown drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion 30 September 2016, 03:16:57 UTC
c6169de Linus Torvalds 29 September 2016, 21:59:11 UTC Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Four fixes for "flush hint" support. Flush hints are addresses advertised by the ACPI 6+ NFIT (NVDIMM Firmware Interface Table) that when written and fenced guarantee that writes pending in platform write buffers (outside the cpu) have been flushed to media. They might also be used by hypervisors as a trigger condition to flush guest-persistent memory ranges to storage. Fix a potential data corruption issue, a broken definition of the hint array, a wrong allocation size for the unit test implementation of the flush hint table, and missing NULL check in an error path. The unit test, while it did not prevent these bugs from being merged, at least triggered occasional crashes in advance of production usages. - Fix handling of ACPI DSM error status results. The DSM mechanism allows communication with platform and memory device firmware. We correctly parse known errors, but were silently ignoring others. Fix it to consistently fail any command with a non-zero status return that we otherwise do not interpret / handle. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, region: fix flush hint table thinko nfit: fail DSMs that return non-zero status by default libnvdimm: fix devm_nvdimm_memremap() error path tools/testing/nvdimm: fix allocation range for mock flush hint tables nvdimm: fix PHYS_PFN/PFN_PHYS mixup 29 September 2016, 21:59:11 UTC
e1bfc11 Andy Lutomirski 28 September 2016, 19:34:14 UTC x86/init: Fix cr4_init_shadow() on CR4-less machines cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 29 September 2016, 17:08:30 UTC
058effe Paul Burton 02 September 2016, 14:17:31 UTC MIPS: Fix detection of unsupported highmem with cache aliases The paging_init() function contains code which detects that highmem is in use but unsupported due to dcache aliasing. However this code was ineffective because it was being run before the caches are probed, meaning that cpu_has_dc_aliases would always evaluate to false (unless a platform overrides it to a compile-time constant) and the detection of the unsupported case is never triggered. The kernel would then go on to attempt to use highmem & either hit coherency issues or trigger the BUG_ON in flush_kernel_dcache_page(). Fix this by running paging_init() later than cpu_cache_init(), such that the cpu_has_dc_aliases macro will evaluate correctly & the unsupported highmem case will be detected successfully. This then leads to a formerly hidden issue in that mem_init_free_highmem() will attempt to free all highmem pages, even though we're avoiding use of them & don't have valid page structs for them. This leads to an invalid pointer dereference & a TLB exception. Avoid this by skipping the loop in mem_init_free_highmem() if cpu_has_dc_aliases evaluates true. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rabin Vincent <rabinv@axis.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14184/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
305723a Paul Burton 02 September 2016, 15:07:10 UTC MIPS: Malta: Fix IOCU disable switch read for MIPS64 Malta boards used with CPU emulators feature a switch to disable use of an IOCU. Software has to check this switch & ignore any present IOCU if the switch is closed. The read used to do this was unsafe for 64 bit kernels, as it simply casted the address 0xbf403000 to a pointer & dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a 64 bit kernel this attempts to access xuseg & results in an address error exception. Fix by accessing a correctly formed ckseg1 address generated using the CKSEG1ADDR macro. Whilst modifying this code, define the name of the register and the bit we care about within it, which indicates whether PCI DMA is routed to the IOCU or straight to DRAM. The code previously checked that bit 0 was also set, but the least significant 7 bits of the CONFIG_GEN0 register contain the value of the MReqInfo signal provided to the IOCU OCP bus, so singling out bit 0 makes little sense & that part of the check is dropped. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b6d92b4a6bdb ("MIPS: Add option to disable software I/O coherency.") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
1eefcbc Paul Burton 19 August 2016, 17:15:40 UTC MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS When the kernel is built for microMIPS, branches targets need to be known to be microMIPS code in order to result in bit 0 of the PC being set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply the end of the macro, which may be pointing at padding rather than at code. This results in recent enough GNU linkers complaining like so: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes. mips-img-linux-gnu-ld: final link failed: Bad value Makefile:936: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Fix this by changing the branch target to be the start of the appropriate handler, skipping over any padding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
67acd8d Paul Burton 19 August 2016, 17:18:28 UTC MIPS: clear execution hazard after changing FTLB enable On current P-series cores from Imagination the FTLB can be enabled or disabled via a bit in the Config6 register, and an execution hazard is created by changing the value of bit. The ftlb_disable function already cleared that hazard but that does no good for other callers. Clear the hazard in the set_ftlb_enable function that creates it, and only for the cores where it applies. This has the effect of reverting c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") which was incorrect. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
ebd0e0f Paul Burton 19 August 2016, 17:18:27 UTC MIPS: Configure FTLB after probing TLB sizes from config4 On some cores (proAptiv, P5600) we make use of the sizes of the TLBs to determine the desired FTLB:VTLB write ratio. However set_ftlb_enable & thus calculate_ftlb_probability is called before decode_config4. This results in us calculating a probability based on zero sizes, and we end up setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio in all cases. This will make abysmal use of the available FTLB resources in the affected cores. Fix this by configuring the FTLB probability after having decoded config4. However we do need to have enabled the FTLB before that point such that fields in config4 actually reflect that an FTLB is present. So set_ftlb_enable is now called twice, with flags indicating that it should configure the write probability only the second time. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: cf0a8aa0226d ("MIPS: cpu-probe: Set the FTLB probability bit on supported cores") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
72c70f0 Paul Burton 19 August 2016, 17:18:26 UTC MIPS: Stop setting I6400 FTLBP The FTLBP field in Config7 for the I6400 is intended as chicken bits for debugging rather than as a field that software actually makes use of. For best performance, FTLBP should be left at its default value of 0 with all TLB writes hitting the FTLB by default. Additionally, since set_ftlb_enable is called from decode_configs before decode_config4 which determines the size of the TLBs, this was previously always setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio which makes abysmal use of the available FTLB resources. This effectively reverts b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400"). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14021/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
3021773 Ralf Baechle 20 September 2016, 12:33:01 UTC MIPS: DEC: Avoid la pseudo-instruction in delay slots When expanding the la or dla pseudo-instruction in a delay slot the GNU assembler will complain should the pseudo-instruction expand to multiple actual instructions, since only the first of them will be in the delay slot leading to the pseudo-instruction being only partially executed if the branch is taken. Use of PTR_LA in the dec int-handler.S leads to such warnings: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot Avoid this by open coding the PTR_LA macros. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
0a90055 Steven J. Hill 26 August 2016, 19:02:04 UTC MIPS: Octeon: mark GPIO controller node not populated after IRQ init. We clear the OF_POPULATED flag for the GPIO controller node on Octeon processors. Otherwise, none of the devices hanging on the GPIO lines are probed. The 'gpio-leds' driver on OCTEON failed to probe in addition to other devices on Cavium 71xx and 78xx development boards. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
ca86c9e Marcin Nowakowski 22 September 2016, 13:38:33 UTC MIPS: uprobes: fix use of uninitialised variable arch_uprobe_pre_xol needs to emulate a branch if a branch instruction has been replaced with a breakpoint, but in fact an uninitialised local variable was passed to the emulator routine instead of the original instruction Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14300/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
ddabfa5 Marcin Nowakowski 22 September 2016, 13:38:32 UTC MIPS: uprobes: remove incorrect set_orig_insn Generic kernel code implements a weak version of set_orig_insn that moves cached 'insn' from arch_uprobe to the original code location when the trap is removed. MIPS variant used arch_uprobe->orig_inst which was never initialised properly, so this code only inserted a nop instead of the original instruction. With that change orig_inst can also be safely removed. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14299/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
db06068 Marcin Nowakowski 22 September 2016, 13:38:31 UTC MIPS: fix uretprobe implementation arch_uretprobe_hijack_return_addr should replace the return address for a call with a trampoline address. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14298/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
6ca8ac7 Matt Redfearn 22 September 2016, 10:59:47 UTC MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs Commit 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors") added a call to mips_cm_lock_other in order to lock the CPC in CPUs containing a version 3 or higher Coherence Manager, which use the general CM core other register, where previous CMs had a dedicated core other register for the CPC. A kernel BUG() is triggered, however, if mips_cm_lock_other is called with a VP other than 0 on a CPU with CM < 3, a condition introduced by 0d2808f338c7. Avoid the BUG() by always locking VP0 when locking the CPC, since the required register, cpc_stat_conf, is shared by all vps in a core. Fixes: 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug...) Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14297/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 29 September 2016, 16:59:49 UTC
d248220 Roger Quadros 29 September 2016, 07:32:55 UTC ARM: 8617/1: dma: fix dma_max_pfn() Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 29 September 2016, 15:57:44 UTC
ba6dea4 Robin Murphy 26 September 2016, 15:50:55 UTC ARM: 8616/1: dt: Respect property size when parsing CPUs Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 29 September 2016, 15:57:43 UTC
2a0100d David S. Miller 29 September 2016, 00:40:52 UTC sparc64: Fix non-SMP build. Need to provide a dummy smp_fill_in_cpu_possible_map. Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2016, 00:40:52 UTC
53061af Linus Torvalds 28 September 2016, 23:20:24 UTC Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mem-hotplug: use nodes that contain memory as mask in new_node_page() scripts/recordmcount.c: account for .softirqentry.text dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUG mm,ksm: fix endless looping in allocating memory when ksm enable 28 September 2016, 23:20:24 UTC
231e97e Li Zhong 28 September 2016, 22:22:38 UTC mem-hotplug: use nodes that contain memory as mask in new_node_page() 9bb627be47a5 ("mem-hotplug: don't clear the only node in new_node_page()") prevents allocating from an empty nodemask, but as David points out, it is still wrong. As node_online_map may include memoryless nodes, only allocating from these nodes is meaningless. This patch uses node_states[N_MEMORY] mask to prevent the above case. Fixes: 9bb627be47a5 ("mem-hotplug: don't clear the only node in new_node_page()") Fixes: 394e31d2ceb4 ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline") Link: http://lkml.kernel.org/r/1474447117.28370.6.camel@TP420 Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2016, 23:19:02 UTC
e436fd6 Dmitry Vyukov 28 September 2016, 22:22:36 UTC scripts/recordmcount.c: account for .softirqentry.text be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added .softirqentry.text section, but it was not added to recordmcount. So functions in the section are untracable. Add the section to scripts/recordmcount.c and scripts/recordmcount.pl. Fixes: be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") Link: http://lkml.kernel.org/r/1474902626-73468-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Steve Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2016, 23:19:02 UTC
2481366 Andrey Smirnov 28 September 2016, 22:22:33 UTC dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUG When CONFIG_DMA_API_DEBUG is enabled we need to preserve unmapping address even if "unmap" is a no-op for our architecutre because we need debug_dma_unmap_page() to correctly cleanup all of the debug bookkeeping. Failing to do so results in a false positive warnings about previously mapped areas never being unmapped. Link: http://lkml.kernel.org/r/1474387125-3713-1-git-send-email-andrew.smirnov@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: "Luis R. Rodriguez" <mcgrof@suse.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Geliang Tang <geliangtang@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2016, 23:19:01 UTC
5b398e4 zhong jiang 28 September 2016, 22:22:30 UTC mm,ksm: fix endless looping in allocating memory when ksm enable I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Suggested-by: Hugh Dickins <hughd@google.com> Suggested-by: Michal Hocko <mhocko@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2016, 23:19:01 UTC
ae6dd8d Linus Torvalds 28 September 2016, 19:53:08 UTC Merge tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd Pull late MTD fixes from Brian Norris: "Another round of MTD fixes for v4.8 My apologies for sending this so late. I've been fairly absent as a maintainer this cycle, but I did queue these up weeks ago. In the meantime, Richard was able to handle some other fixes (thanks!) but didn't pick these up. On the bright side, these are very simple changes that should carry little risk. Summary: - Davinci NAND: fix a long-standing bug in how we clear/prep 4-bit ECC - OMAP NAND: an error-handling fix that made it into v4.8-rc1 caused error-handling cases in other configurations/code-paths; this fixes the fix" * tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd: mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl mtd: nand: omap2: Don't call dma_release_channel() if dma_request_chan() failed 28 September 2016, 19:53:08 UTC
0a966fa Mark Fasheh 28 September 2016, 19:51:04 UTC MAINTAINERS: Update my e-mail I will be starting employment at Versity next week and would like to update my MAINTAINERS e-mail to reflect that change. My versity e-mail is already activated so I shouldn't get any bounces on the new one. My ability to help with Ocfs2 kernel maintenance won't change as a result of the new job. Signed-off-by: Mark Fasheh <mfasheh@versity.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2016, 19:52:05 UTC
ebb99a4 Atish Patra 15 September 2016, 20:54:41 UTC sparc64: Fix irq stack bootmem allocation. Currently, irq stack bootmem is allocated for all possible cpus before nr_cpus value changes the list of possible cpus. As a result, there is unnecessary wastage of bootmemory. Move the irq stack bootmem allocation so that it happens after possible cpu list is modified based on nr_cpus value. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2016, 15:24:03 UTC
9b2f753 Atish Patra 15 September 2016, 20:54:40 UTC sparc64: Fix cpu_possible_mask if nr_cpus is set If kernel boot parameter nr_cpus is set, it should define the number of CPUs that can ever be available in the system i.e. cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based on the cpu_possible_mask during kernel initialization. If cpu_possible_mask is not set based on the nr_cpus value, earlier part of the kernel would be initialized using nr_cpus value leading to a kernel crash. Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids() becomes redundant and does not corrupt nr_cpu_ids value. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2016, 15:24:02 UTC
1e953d8 Mike Kravetz 31 August 2016, 20:48:19 UTC sparc64 mm: Fix more TSB sizing issues Commit af1b1a9b36b8 ("sparc64 mm: Fix base TSB sizing when hugetlb pages are used") addressed the difference between hugetlb and THP pages when computing TSB sizes. The following additional issues were also discovered while working with the code. In order to save memory, THP makes use of a huge zero page. This huge zero page does not count against a task's RSS, but it does consume TSB entries. This is similar to hugetlb pages. Therefore, count huge zero page entries in hugetlb_pte_count. Accounting of THP pages is done in the routine set_pmd_at(). Unfortunately, this does not catch the case where a THP page is split. To handle this case, decrement the count in pmdp_invalidate(). pmdp_invalidate is only called when splitting a THP. However, 'sanity checks' are added in case it is ever called for other purposes. A more general issue exists with HPAGE_SIZE accounting. hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages. This value is used to size the TSB for HPAGE_SIZE pages. However, each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages. The TSB contains an entry for each REAL_HPAGE_SIZE page. Therefore, the number of REAL_HPAGE_SIZE pages should be used to size the huge page TSB. A new compile time constant REAL_HPAGE_PER_HPAGE is used to multiply hugetlb_pte_count before sizing the TSB. Changes from V1 - Fixed build issue if hugetlb or THP not configured Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2016, 15:24:02 UTC
bdf2f59 Paul Gortmaker 06 August 2016, 04:31:48 UTC sparc64: fix section mismatch in find_numa_latencies_for_group To fix: WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in reference from the function find_numa_latencies_for_group() to the function .init.text:find_mlgroup() The function find_numa_latencies_for_group() references the function __init find_mlgroup(). This is often because find_numa_latencies_for_group lacks a __init annotation or the annotation of find_mlgroup is wrong. It turns out find_numa_latencies_for_group is only called from: static int __init numa_parse_mdesc(void) and hence we can tag find_numa_latencies_for_group with __init. In doing so we see that find_best_numa_node_for_mlgroup is only called from within __init and hence can also be marked with __init. Cc: "David S. Miller" <davem@davemloft.net> Cc: Nitin Gupta <nitin.m.gupta@oracle.com> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: sparclinux@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 September 2016, 15:24:02 UTC
539294b James Bottomley 28 September 2016, 05:30:51 UTC Merge remote-tracking branch 'mkp-scsi/4.8/scsi-fixes' into fixes 28 September 2016, 05:30:51 UTC
90fd68d David Herrmann 23 September 2016, 10:36:02 UTC drm/udl: fix line iterator in damage handling The udl damage handler is supposed to render 'height' lines, but its iterator has an obvious typo that makes it miss most lines if the rectangle does not cover 0/0. Fix the damage handler to correctly render all lines. This is a fallout from: commit e375882406d0cc24030746638592004755ed4ae0 Author: Noralf Trønnes <noralf@tronnes.org> Date: Thu Apr 28 17:18:37 2016 +0200 drm/udl: Use drm_fb_helper deferred_io support Tested-by: poma <poma@gmail.com> Cc: stable@vger.kernel.org # 4.7+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 28 September 2016, 03:29:18 UTC
aaee1d1 Dave Airlie 28 September 2016, 00:23:50 UTC Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-fixes nouveau: couple of fixes. * 'linux-4.8' of git://github.com/skeggsb/linux: drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion 28 September 2016, 00:23:50 UTC
b86f9fa Dave Airlie 28 September 2016, 00:19:35 UTC Merge branch 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux into drm-fixes two amd fixes. * 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/si/dpm: add workaround for for Jet parts drm/amdgpu: disable CRTCs before teardown 28 September 2016, 00:19:35 UTC
8ab293e Linus Torvalds 27 September 2016, 23:43:11 UTC Merge branch 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Three late fixes for cgroup: Two cpuset ones, one trivial and the other pretty obscure, and a cgroup core fix for a bug which impacts cgroup v2 namespace users" * 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix invalid controller enable rejections with cgroup namespace cpuset: fix non static symbol warning cpuset: handle race between CPU hotplug and cpuset_hotplug_work 27 September 2016, 23:43:11 UTC
670bb4f Alex Deucher 26 September 2016, 19:32:50 UTC drm/radeon/si/dpm: add workaround for for Jet parts Add clock quirks for Jet parts. Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 September 2016, 16:22:29 UTC
a951ed8 Grazvydas Ignotas 25 September 2016, 20:34:48 UTC drm/amdgpu: disable CRTCs before teardown Some code called by drm_crtc_force_disable_all() wants to wait for all fences, so only do fence teardown after CRTCs are disabled. Fixes: 84b89bdcedf8 ("drm/amdgpu: Turn off CRTCs on driver unload") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 September 2016, 16:22:21 UTC
7b8147a David S. Miller 27 September 2016, 13:53:30 UTC Merge branch 'act_ife-fixes' Yotam Gigi says: ==================== Fix tc-ife bugs This patch-set contains two bugfixes in the tc-ife action, one fixing some random behaviour in encode side, and one fixing the decode side packet parsing logic. v2->v3 - Fix the encode side instead of the decode side ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 13:53:30 UTC
c006da0 Yotam Gigi 26 September 2016, 10:45:26 UTC act_ife: Fix false encoding On ife encode side, the action stores the different tlvs inside the ife header, where each tlv length field should refer to the length of the whole tlv (without additional padding) and not just the data length. On ife decode side, the action iterates over the tlvs in the ife header and parses them one by one, where in each iteration the current pointer is advanced according to the tlv size. Before, the encoding encoded only the data length inside the tlv, which led to false parsing of ife the header. In addition, due to the fact that the loop counter was unsigned, it could lead to infinite parsing loop. This fix changes the loop counter to be signed and fixes the encoding to take into account the tlv type and size. Fixes: 28a10c426e81 ("net sched: fix encoding to use real length") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 13:53:17 UTC
4b1d488 Yotam Gigi 26 September 2016, 10:45:25 UTC act_ife: Fix external mac header on encode On ife encode side, external mac header is copied from the original packet and may be overridden if the user requests. Before, the mac header copy was done from memory region that might not be accessible anymore, as skb_cow_head might free it and copy the packet. This led to random values in the external mac header once the values were not set by user. This fix takes the internal mac header from the packet, after the call to skb_cow_head. Fixes: ef6980b6becb ("net sched: introduce IFE action") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 13:53:16 UTC
1190cfd Jorgen Hansen 27 September 2016, 06:59:53 UTC VSOCK: Don't dec ack backlog twice for rejected connections If a pending socket is marked as rejected, we will decrease the sk_ack_backlog twice. So don't decrement it for rejected sockets in vsock_pending_work(). Testing of the rejected socket path was done through code modifications. Reported-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Reviewed-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 11:59:25 UTC
bf1a85a Florian Fainelli 24 September 2016, 19:58:30 UTC Revert "net: ethernet: bcmgenet: use phydev from struct net_device" This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 11:41:12 UTC
6c1394f David S. Miller 27 September 2016, 11:39:38 UTC Merge branch 'fec-align' Eric Nelson says: ==================== net: fec: updates to align IP header This patch series is the outcome of investigation into very high numbers of alignment faults on kernel 4.1.33 from the linux-fslc tree: https://github.com/freescale/linux-fslc/tree/4.1-1.0.x-imx The first two patches remove support for the receive accelerator (RACC) from the i.MX25 and i.MX27 SoCs which don't support the function. The third patch enables hardware alignment of the ethernet packet payload (and especially the IP header) to prevent alignment faults in the IP stack. Testing on i.MX6UL on the 4.1.33 kernel showed that this patch removed on the order of 70k alignment faults during a 100MiB transfer using wget. Testing on an i.MX6Q (SABRE Lite) board on net-next (4.8.0-rc7) showed a much more modest improvement from 10's of faults, and it's not clear why that's the case. ==================== Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 11:40:19 UTC
3ac72b7 Eric Nelson 24 September 2016, 14:42:19 UTC net: fec: align IP header in hardware The FEC receive accelerator (RACC) supports shifting the data payload of received packets by 16-bits, which aligns the payload (IP header) on a 4-byte boundary, which is, if not required, at least strongly suggested by the Linux networking layer. Without this patch, a huge number of alignment faults will be taken by the IP stack, as seen in /proc/cpu/alignment: ~/$ cat /proc/cpu/alignment User: 0 System: 72645 (inet_gro_receive+0x104/0x27c) Skipped: 0 Half: 0 Word: 0 DWord: 0 Multi: 72645 User faults: 3 (fixup+warn) This patch was suggested by Andrew Lunn in this message to linux-netdev: http://marc.info/?l=linux-arm-kernel&m=147465452108384&w=2 and adapted from a patch by Russell King from 2014: http://git.arm.linux.org.uk/cgit/linux-arm.git/commit/?id=70d8a8a Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 11:39:34 UTC
97dc499 Eric Nelson 24 September 2016, 14:42:18 UTC net: fec: remove QUIRK_HAS_RACC from i.mx27 According to the i.MX27 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://cache.nxp.com/files/32bit/doc/ref_manual/MCIMX27RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 11:39:34 UTC
653d37d Eric Nelson 24 September 2016, 14:42:17 UTC net: fec: remove QUIRK_HAS_RACC from i.mx25 According to the i.MX25 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://www.nxp.com/files/dsp/doc/ref_manual/IMX25RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2016, 11:39:33 UTC
9fb6de1 Ville Ranki 15 September 2016, 22:31:27 UTC Input: joydev - recognize devices with Z axis as joysticks Current implementation of joydev's input_device_id table recognizes only devices with ABS_X, ABS_WHEEL or ABS_THROTTLE axes as joysticks. There are joystick devices that do not have those axes, for example TRC Rudder device. The device in question has ABS_Z, ABS_RX and ABS_RY axes causing it not being detected as joystick. This patch adds ABS_Z to the input_device_id list allowing devices with ABS_Z axis to be detected correctly. Signed-off-by: Ville Ranki <ville.ranki@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 27 September 2016, 03:03:06 UTC
8d58881 Bart Van Assche 22 September 2016, 21:20:54 UTC scsi: Avoid that toggling use_blk_mq triggers a memory leak This patch avoids that the following memory leak is triggered if use_blk_mq is disabled after a SCSI host has been allocated by the ib_srp driver and before the same SCSI host is freed: unreferenced object 0xffff8803a168c568 (size 256): backtrace: [<ffffffff81620c95>] kmemleak_alloc+0x45/0xa0 [<ffffffff811bb104>] __kmalloc_node+0x1e4/0x400 [<ffffffff81309fe4>] blk_mq_alloc_tag_set+0xb4/0x230 [<ffffffff814731b7>] scsi_mq_setup_tags+0xc7/0xd0 [<ffffffff81469c26>] scsi_add_host_with_dma+0x216/0x2d0 [<ffffffffa064bef5>] srp_create_target+0xe55/0x13d0 [ib_srp] [<ffffffff8143ce23>] dev_attr_store+0x13/0x20 [<ffffffff8125f030>] sysfs_kf_write+0x40/0x50 [<ffffffff8125e397>] kernfs_fop_write+0x137/0x1c0 [<ffffffff811d8c13>] __vfs_write+0x23/0x140 [<ffffffff811d92e0>] vfs_write+0xb0/0x190 [<ffffffff811da5b4>] SyS_write+0x44/0xa0 [<ffffffff8162c8a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Fixes: 9aa9cc4221f5 ("scsi: remove the disable_blk_mq host flag") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 27 September 2016, 00:58:42 UTC
2cf7507 Nikolay Aleksandrov 25 September 2016, 21:08:31 UTC ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 September 2016, 03:41:39 UTC
08895a8 Linus Torvalds 26 September 2016, 01:47:13 UTC Linux 4.8-rc8 26 September 2016, 01:47:13 UTC
4c04b4b Linus Torvalds 26 September 2016, 01:40:13 UTC Merge tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracefs fixes from Steven Rostedt: "Al Viro has been looking at the tracefs code, and has pointed out some issues. This contains one fix by me and one by Al. I'm sure that he'll come up with more but for now I tested these patches and they don't appear to have any negative impact on tracing" * tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data 26 September 2016, 01:40:13 UTC
90b75db Dave Chinner 25 September 2016, 23:57:33 UTC fault_in_multipages_readable() throws set-but-unused error When building XFS with -Werror, it now fails with: include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:602:16: error: variable 'c' set but not used [-Werror=unused-but-set-variable] volatile char c; ^ This is a regression caused by commit e23d4159b109 ("fix fault_in_multipages_...() on architectures with no-op access_ok()"). Fix it by re-adding the "(void)c" trick taht was previously used to make the compiler think the variable is used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 September 2016, 01:16:44 UTC
38e0885 Lorenzo Stoakes 11 September 2016, 22:54:25 UTC mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing The NUMA balancing logic uses an arch-specific PROT_NONE page table flag defined by pte_protnone() or pmd_protnone() to mark PTEs or huge page PMDs respectively as requiring balancing upon a subsequent page fault. User-defined PROT_NONE memory regions which also have this flag set will not normally invoke the NUMA balancing code as do_page_fault() will send a segfault to the process before handle_mm_fault() is even called. However if access_remote_vm() is invoked to access a PROT_NONE region of memory, handle_mm_fault() is called via faultin_page() and __get_user_pages() without any access checks being performed, meaning the NUMA balancing logic is incorrectly invoked on a non-NUMA memory region. A simple means of triggering this problem is to access PROT_NONE mmap'd memory using /proc/self/mem which reliably results in the NUMA handling functions being invoked when CONFIG_NUMA_BALANCING is set. This issue was reported in bugzilla (issue 99101) which includes some simple repro code. There are BUG_ON() checks in do_numa_page() and do_huge_pmd_numa_page() added at commit c0e7cad to avoid accidentally provoking strange behaviour by attempting to apply NUMA balancing to pages that are in fact PROT_NONE. The BUG_ON()'s are consistently triggered by the repro. This patch moves the PROT_NONE check into mm/memory.c rather than invoking BUG_ON() as faulting in these pages via faultin_page() is a valid reason for reaching the NUMA check with the PROT_NONE page table flag set and is therefore not always a bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99101 Reported-by: Trevor Saunders <tbsaunde@tbsaunde.org> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2016, 22:43:42 UTC
831e45d Linus Torvalds 25 September 2016, 20:59:52 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "A round of 4.8 fixes: MIPS generic code: - Add a missing ".set pop" in an early commit - Fix memory regions reaching top of physical - MAAR: Fix address alignment - vDSO: Fix Malta EVA mapping to vDSO page structs - uprobes: fix incorrect uprobe brk handling - uprobes: select HAVE_REGS_AND_STACK_ACCESS_API - Avoid a BUG warning during PR_SET_FP_MODE prctl - SMP: Fix possibility of deadlock when bringing CPUs online - R6: Remove compact branch policy Kconfig entries - Fix size calc when avoiding IPIs for small icache flushes - Fix pre-r6 emulation FPU initialisation - Fix delay slot emulation count in debugfs ATH79: - Fix test for error return of clk_register_fixed_factor. Octeon: - Fix kernel header to work for VDSO build. - Fix initialization of platform device probing. paravirt: - Fix undefined reference to smp_bootstrap" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online MIPS: Fix pre-r6 emulation FPU initialisation MIPS: vDSO: Fix Malta EVA mapping to vDSO page structs MIPS: Select HAVE_REGS_AND_STACK_ACCESS_API MIPS: Octeon: Fix platform bus probing MIPS: Octeon: mangle-port: fix build failure with VDSO code MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...) MIPS: c-r4k: Fix size calc when avoiding IPIs for small icache flushes MIPS: Add a missing ".set pop" in an early commit MIPS: paravirt: Fix undefined reference to smp_bootstrap MIPS: Remove compact branch policy Kconfig entries MIPS: MAAR: Fix address alignment MIPS: Fix memory regions reaching top of physical MIPS: uprobes: fix incorrect uprobe brk handling MIPS: ath79: Fix test for error return of clk_register_fixed_factor(). 25 September 2016, 20:59:52 UTC
751b9a5 Linus Torvalds 25 September 2016, 20:52:59 UTC Merge tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull one more powerpc fix from Michael Ellerman: "powernv/pci: Fix m64 checks for SR-IOV and window alignment from Russell Currey" * tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment 25 September 2016, 20:52:59 UTC
8d2c0d3 Linus Torvalds 25 September 2016, 20:32:46 UTC radix tree: fix sibling entry handling in radix_tree_descend() The fixes to the radix tree test suite show that the multi-order case is broken. The basic reason is that the radix tree code uses tagged pointers with the "internal" bit in the low bits, and calculating the pointer indices was supposed to mask off those bits. But gcc will notice that we then use the index to re-create the pointer, and will avoid doing the arithmetic and use the tagged pointer directly. This cleans the code up, using the existing is_sibling_entry() helper to validate the sibling pointer range (instead of open-coding it), and using entry_to_node() to mask off the low tag bit from the pointer. And once you do that, you might as well just use the now cleaned-up pointer directly. [ Side note: the multi-order code isn't actually ever used in the kernel right now, and the only reason I didn't just delete all that code is that Kirill Shutemov piped up and said: "Well, my ext4-with-huge-pages patchset[1] uses multi-order entries. It also converts shmem-with-huge-pages and hugetlb to them. I'm okay with converting it to other mechanism, but I need something. (I looked into Konstantin's RFC patchset[2]. It looks okay, but I don't feel myself qualified to review it as I don't know much about radix-tree internals.)" [1] http://lkml.kernel.org/r/20160915115523.29737-1-kirill.shutemov@linux.intel.com [2] http://lkml.kernel.org/r/147230727479.9957.1087787722571077339.stgit@zurg ] Reported-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Cedric Blancher <cedric.blancher@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2016, 20:32:46 UTC
62fd525 Matthew Wilcox 22 September 2016, 18:53:34 UTC radix tree test suite: Test radix_tree_replace_slot() for multiorder entries When we replace a multiorder entry, check that all indices reflect the new value. Also, compile the test suite with -O2, which shows other problems with the code due to some dodgy pointer operations in the radix tree code. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2016, 18:49:16 UTC
1ae2293 Al Viro 17 September 2016, 22:31:46 UTC fix memory leaks in tracing_buffers_splice_read() Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 25 September 2016, 17:30:13 UTC
1245800 Steven Rostedt (Red Hat) 24 September 2016, 02:57:13 UTC tracing: Move mutex to protect against resetting of seq data The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f45694 ("tracing/core: make the read callbacks reentrants") Cc: stable@vger.kernel.org # 2.6.30+ Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 25 September 2016, 14:27:08 UTC
116e711 Paul Burton 22 September 2016, 14:47:40 UTC MIPS: Fix delay slot emulation count in debugfs Commit 432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions") accidentally removed use of the MIPS_FPU_EMU_INC_STATS macro from do_dsemulret, leading to the ds_emul file in debugfs always returning zero even though we perform delay slot emulations. Fix this by re-adding the use of the MIPS_FPU_EMU_INC_STATS macro. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14301/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 September 2016, 23:59:16 UTC
8f46cca Matt Redfearn 22 September 2016, 16:15:47 UTC MIPS: SMP: Fix possibility of deadlock when bringing CPUs online This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reported-by: Justin Chen <justinpopo6@gmail.com> Tested-by: Justin Chen <justinpopo6@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14302/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 September 2016, 23:43:52 UTC
9c0e28a Linus Torvalds 24 September 2016, 19:44:28 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixlets for perf: - add a missing NULL pointer check in the intel BTS driver - make BTS an exclusive PMU because BTS can only handle one event at a time - ensure that exclusive events are limited to one PMU so that several exclusive events can be scheduled on different PMU instances" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Limit matching exclusive events to one PMU perf/x86/intel/bts: Make it an exclusive PMU perf/x86/intel/bts: Make sure debug store is valid 24 September 2016, 19:44:28 UTC
2507c85 Linus Torvalds 24 September 2016, 19:41:19 UTC Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two smallish fixes: - use the proper asm constraint in the Super-H atomic_fetch_ops - a trivial typo fix in the Kconfig help text" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP() 24 September 2016, 19:41:19 UTC
709b8f6 Linus Torvalds 24 September 2016, 19:35:26 UTC Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Two fixes for EFI/PAT: - a 32bit overflow bug in the PAT code which was unearthed by the large EFI mappings - prevent a boot hang on large systems when EFI mixed mode is enabled but not used" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Only map RAM into EFI page tables if in mixed-mode x86/mm/pat: Prevent hang during boot when mapping pages 24 September 2016, 19:35:26 UTC
4b8b0ff Linus Torvalds 24 September 2016, 19:30:12 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three fixes for irq core and irq chip drivers: - Do not set the irq type if type is NONE. Fixes a boot regression on various SoCs - Use the proper cpu for setting up the GIC target list. Discovered by the cpumask debugging code. - A rather large fix for the MIPS-GIC so per cpu local interrupts work again. This was discovered late because the code falls back to slower timers which use normal device interrupts" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Fix local interrupts irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE 24 September 2016, 19:30:12 UTC
595c730 Dan Williams 24 September 2016, 00:53:52 UTC libnvdimm, region: fix flush hint table thinko The definition of the flush hint table as: void __iomem *flush_wpq[0][0]; ...passed the unit test, but is broken as flush_wpq[0][1] and flush_wpq[1][0] refer to the same entry. Fix this to use a helper that calculates a slot in the table based on the geometry of flush hints in the region. This is important to get right since virtualization solutions use this mechanism to trigger hypervisor flushes to platform persistence. Reported-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 24 September 2016, 18:45:38 UTC
0f26574 Linus Torvalds 24 September 2016, 18:31:45 UTC Merge branch 'hughd-fixes' (patches from Hugh Dickins) Merge VM fixes from High Dickins: "I get the impression that Andrew is away or busy at the moment, so I'm going to send you three independent uncontroversial little mm fixes directly - though none is strictly a 4.8 regression fix. - shmem: fix tmpfs to handle the huge= option properly from Toshi Kani is a one-liner to fix a major embarrassment in 4.8's hugepages on tmpfs feature: although Hillf pointed it out in June, somehow both Kirill and I repeatedly dropped the ball on this one. You might wonder if the feature got tested at all with that bug in: yes, it did, but for wider testing coverage, Kirill and I had each relied too much on an override which bypasses that condition. - huge tmpfs: fix Committed_AS leak just a run-of-the-mill accounting fix in the same feature. - mm: delete unnecessary and unsafe init_tlb_ubc() is an unrelated fix to 4.3's TLB flush batching in reclaim: the bug would be rare, and none of us will be shamed if this one misses 4.8; but it got such a quick ack from Mel today that I'm inclined to offer it along with the first two" * emailed patches from Hugh Dickins <hughd@google.com>: mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly 24 September 2016, 18:31:45 UTC
b385d21 Hugh Dickins 24 September 2016, 03:27:04 UTC mm: delete unnecessary and unsafe init_tlb_ubc() init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically initialized with zeroes in the init_task, and copied from parent to child while it is quiescent in arch_dup_task_struct(); so I went to delete it. But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to check that it was always empty at that point, and found them firing: because memcg reclaim can recurse into global reclaim (when allocating biosets for swapout in my case), and arrive back at the init_tlb_ubc() in shrink_node_memcg(). Resetting tlb_ubc.flush_required at that point is wrong: if the upper level needs a deferred TLB flush, but the lower level turns out not to, we miss a TLB flush. But fortunately, that's the only part of the protocol that does not nest: with the initialization removed, cpumask collects bits from upper and lower levels, and flushes TLB when needed. Fixes: 72b252aed506 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2016, 18:20:01 UTC
7166466 Hugh Dickins 24 September 2016, 03:24:23 UTC huge tmpfs: fix Committed_AS leak Under swapping load on huge tmpfs, /proc/meminfo's Committed_AS grows bigger and bigger: just a cosmetic issue for most users, but disabling for those who run without overcommit (/proc/sys/vm/overcommit_memory 2). shmem_uncharge() was forgetting to unaccount __vm_enough_memory's charge, and shmem_charge() was forgetting it on the filesystem-full error path. Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2016, 18:20:01 UTC
3089bf6 Toshi Kani 24 September 2016, 03:21:56 UTC shmem: fix tmpfs to handle the huge= option properly shmem_get_unmapped_area() checks SHMEM_SB(sb)->huge incorrectly, which leads to a reversed effect of "huge=" mount option. Fix the check in shmem_get_unmapped_area(). Note, the default value of SHMEM_SB(sb)->huge remains as SHMEM_HUGE_NEVER. User will need to specify "huge=" option to enable huge page mappings. Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2016, 18:20:01 UTC
db32e4e Lance Richardson 23 September 2016, 19:50:29 UTC ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() Similar to commit 3be07244b733 ("ip6_gre: fix flowi6_proto value in xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup. Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value. This affected output route lookup for packets sent on an ip6gretap device in cases where routing was dependent on the value of flowi6_proto. Since the correct proto is already set in the tunnel flowi6 template via commit 252f3f5a1189 ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path."), simply delete the line setting the incorrect flowi6_proto value. Suggested-by: Jiri Benc <jbenc@redhat.com> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 September 2016, 13:44:31 UTC
bd5dbcb Linus Torvalds 23 September 2016, 23:44:12 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Three driver bugfixes: fixing uninitialized memory pointers (eg20t), pm/clock imbalance (qup), and a wrongly set cached variable (pc954x)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended i2c: mux: pca954x: retry updating the mux selection on failure i2c-eg20t: fix race between i2c init and interrupt enable 23 September 2016, 23:44:12 UTC
d0c1d15 Linus Torvalds 23 September 2016, 23:34:24 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a fix up for the firmware handling to the Silead driver (which is a new driver in this release)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead_gsl1680 - use "silead/" prefix for firmware loading Input: silead_gsl1680 - document firmware-name, fix implementation 23 September 2016, 23:34:24 UTC
4ee6986 Linus Torvalds 23 September 2016, 23:24:36 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Three fixes, two regressions and one that poses a problem in blk-mq with the new nvmef code" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx nvme-rdma: only clear queue flags after successful connect blk-throttle: Extend slice if throttle group is not empty 23 September 2016, 23:24:36 UTC
9157056 Tejun Heo 23 September 2016, 20:55:49 UTC cgroup: fix invalid controller enable rejections with cgroup namespace On the v2 hierarchy, "cgroup.subtree_control" rejects controller enables if the cgroup has processes in it. The enforcement of this logic assumes that the cgroup wouldn't have any css_sets associated with it if there are no tasks in the cgroup, which is no longer true since a79a908fd2b0 ("cgroup: introduce cgroup namespaces"). When a cgroup namespace is created, it pins the css_set of the creating task to use it as the root css_set of the namespace. This extra reference stays as long as the namespace is around and makes "cgroup.subtree_control" think that the namespace root cgroup is not empty even when it is and thus reject controller enables. Fix it by making cgroup_subtree_control() walk and test emptiness of each css_set instead of testing whether the list_head is empty. While at it, update the comment of cgroup_task_count() to indicate that the returned value may be higher than the number of tasks, which has always been true due to temporary references and doesn't break anything. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: Aditya Kali <adityakali@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: stable@vger.kernel.org # v4.6+ Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces") Link: https://github.com/systemd/systemd/pull/3589#issuecomment-249089541 23 September 2016, 20:55:49 UTC
b22734a Linus Torvalds 23 September 2016, 20:39:37 UTC Merge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Josef fixed a problem when quotas are enabled with his latest ENOSPC rework, and Jeff added more checks into the subvol ioctls to avoid tripping up lookup_one_len" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: ensure that file descriptor used with subvol ioctls is a dir Btrfs: handle quota reserve failure properly 23 September 2016, 20:39:37 UTC
back to top