https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
9395452 Linux 4.8-rc6 12 September 2016, 03:02:25 UTC
bd0b841 nvme: make NVME_RDMA depend on BLOCK Commit aa71987472a9 ("nvme: fabrics drivers don't need the nvme-pci driver") removed the dependency on BLK_DEV_NVME, but the cdoe does depend on the block layer (which used to be an implicit dependency through BLK_DEV_NVME). Otherwise you get various errors from the kbuild test robot random config testing when that happens to hit a configuration with BLOCK device support disabled. Cc: Christoph Hellwig <hch@lst.de> Cc: Jay Freyensee <james_p_freyensee@linux.intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 September 2016, 21:41:49 UTC
2afe669 Merge tag 'staging-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes from Greg KH: "Here are a few small IIO fixes for 4.8-rc6. Nothing major, full details are in the shortlog, all of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:core: fix IIO_VAL_FRACTIONAL sign handling iio: ensure ret is initialized to zero before entering do loop iio: accel: kxsd9: Fix scaling bug iio: accel: bmc150: reset chip at init time iio: fix pressure data output unit in hid-sensor-attributes tools:iio:iio_generic_buffer: fix trigger-less mode 11 September 2016, 21:23:48 UTC
61c3dae Merge tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB gadget, phy, and xhci fixes for 4.8-rc6. All of these resolve minor issues that have been reported, and all have been in linux-next with no reported issues" * tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase xhci: fix null pointer dereference in stop command timeout function usb: dwc3: pci: fix build warning on !PM_SLEEP usb: gadget: prevent potenial null pointer dereference on skb->len usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition usb: phy: phy-generic: Check clk_prepare_enable() error usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON Revert "usb: dwc3: gadget: always decrement by 1" 11 September 2016, 21:10:29 UTC
98ac9a6 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "nvdimm fixes for v4.8, two of them are tagged for -stable: - Fix devm_memremap_pages() to use track_pfn_insert(). Otherwise, DAX pmd mappings end up with an uncached pgprot, and unusable performance for the device-dax interface. The device-dax interface appeared in 4.7 so this is tagged for -stable. - Fix a couple VM_BUG_ON() checks in the show_smaps() path to understand DAX pmd entries. This fix is tagged for -stable. - Fix a mis-merge of the nfit machine-check handler to flip the polarity of an if() to match the final version of the patch that Vishal sent for 4.8-rc1. Without this the nfit machine check handler never detects / inserts new 'badblocks' entries which applications use to identify lost portions of files. - For test purposes, fix the nvdimm_clear_poison() path to operate on legacy / simulated nvdimm memory ranges. Without this fix a test can set badblocks, but never clear them on these ranges. - Fix the range checking done by dax_dev_pmd_fault(). This is not tagged for -stable since this problem is mitigated by specifying aligned resources at device-dax setup time. These patches have appeared in a next release over the past week. The recent rebase you can see in the timestamps was to drop an invalid fix as identified by the updated device-dax unit tests [1]. The -mm touches have an ack from Andrew" [1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs" https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: allow legacy (e820) pmem region to clear bad blocks nfit, mce: Fix SPA matching logic in MCE handler mm: fix cache mode of dax pmd mappings mm: fix show_smap() for zone_device-pmd ranges dax: fix mapping size check 10 September 2016, 16:58:52 UTC
b8db371 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Mostly driver bugfixes, but also a few cleanups which are nice to have out of the way" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rk3x: Restore clock settings at resume time i2c: Spelling s/acknowedge/acknowledge/ i2c: designware: save the preset value of DW_IC_SDA_HOLD Documentation: i2c: slave-interface: add note for driver development i2c: mux: demux-pinctrl: run properly with multiple instances i2c: bcm-kona: fix inconsistent indenting i2c: rcar: use proper device with dma_mapping_error i2c: sh_mobile: use proper device with dma_mapping_error i2c: mux: demux-pinctrl: invalidate properly when switching fails 10 September 2016, 16:43:10 UTC
6905732 Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull fscrypto fixes fromTed Ts'o: "Fix some brown-paper-bag bugs for fscrypto, including one one which allows a malicious user to set an encryption policy on an empty directory which they do not own" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fscrypto: require write access to mount to set encryption policy fscrypto: only allow setting encryption policy on directories fscrypto: add authorization check for setting encryption policy 10 September 2016, 16:18:33 UTC
ba63f23 fscrypto: require write access to mount to set encryption policy Since setting an encryption policy requires writing metadata to the filesystem, it should be guarded by mnt_want_write/mnt_drop_write. Otherwise, a user could cause a write to a frozen or readonly filesystem. This was handled correctly by f2fs but not by ext4. Make fscrypt_process_policy() handle it rather than relying on the filesystem to get it right. Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs} Signed-off-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> 10 September 2016, 05:18:57 UTC
002ced4 fscrypto: only allow setting encryption policy on directories The FS_IOC_SET_ENCRYPTION_POLICY ioctl allowed setting an encryption policy on nondirectory files. This was unintentional, and in the case of nonempty regular files did not behave as expected because existing data was not actually encrypted by the ioctl. In the case of ext4, the user could also trigger filesystem errors in ->empty_dir(), e.g. due to mismatched "directory" checksums when the kernel incorrectly tried to interpret a regular file as a directory. This bug affected ext4 with kernels v4.8-rc1 or later and f2fs with kernels v4.6 and later. It appears that older kernels only permitted directories and that the check was accidentally lost during the refactoring to share the file encryption code between ext4 and f2fs. This patch restores the !S_ISDIR() check that was present in older kernels. Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> 10 September 2016, 03:38:12 UTC
163ae1c fscrypto: add authorization check for setting encryption policy On an ext4 or f2fs filesystem with file encryption supported, a user could set an encryption policy on any empty directory(*) to which they had readonly access. This is obviously problematic, since such a directory might be owned by another user and the new encryption policy would prevent that other user from creating files in their own directory (for example). Fix this by requiring inode_owner_or_capable() permission to set an encryption policy. This means that either the caller must own the file, or the caller must have the capability CAP_FOWNER. (*) Or also on any regular file, for f2fs v4.6 and later and ext4 v4.8-rc1 and later; a separate bug fix is coming for that. Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs} Signed-off-by: Theodore Ts'o <tytso@mit.edu> 10 September 2016, 03:37:14 UTC
1e8b8d9 libnvdimm: allow legacy (e820) pmem region to clear bad blocks Bad blocks can be injected via /sys/block/pmemN/badblocks. In a situation where legacy pmem is being used or a pmem region created by using memmap kernel parameter, the injected bad blocks are not cleared due to nvdimm_clear_poison() failing from lack of ndctl function pointer. In this case we need to just return as handled and allow the bad blocks to be cleared rather than fail. Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 10 September 2016, 00:34:46 UTC
2e21807 nfit, mce: Fix SPA matching logic in MCE handler The check for a 'pmem' type SPA in the MCE handler was inverted due to a merge/rebase error. Fixes: 6839a6d nfit: do an ARS scrub on hitting a latent media error Cc: linux-acpi@vger.kernel.org Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 10 September 2016, 00:34:46 UTC
9049771 mm: fix cache mode of dax pmd mappings track_pfn_insert() in vmf_insert_pfn_pmd() is marking dax mappings as uncacheable rendering them impractical for application usage. DAX-pte mappings are cached and the goal of establishing DAX-pmd mappings is to attain more performance, not dramatically less (3 orders of magnitude). track_pfn_insert() relies on a previous call to reserve_memtype() to establish the expected page_cache_mode for the range. While memremap() arranges for reserve_memtype() to be called, devm_memremap_pages() does not. So, teach track_pfn_insert() and untrack_pfn() how to handle tracking without a vma, and arrange for devm_memremap_pages() to establish the write-back-cache reservation in the memtype tree. Cc: <stable@vger.kernel.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Toshi Kani <toshi.kani@hpe.com> Reported-by: Kai Zhang <kai.ka.zhang@oracle.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 10 September 2016, 00:34:46 UTC
ca120cf mm: fix show_smap() for zone_device-pmd ranges Attempting to dump /proc/<pid>/smaps for a process with pmd dax mappings currently results in the following VM_BUG_ONs: kernel BUG at mm/huge_memory.c:1105! task: ffff88045f16b140 task.stack: ffff88045be14000 RIP: 0010:[<ffffffff81268f9b>] [<ffffffff81268f9b>] follow_trans_huge_pmd+0x2cb/0x340 [..] Call Trace: [<ffffffff81306030>] smaps_pte_range+0xa0/0x4b0 [<ffffffff814c2755>] ? vsnprintf+0x255/0x4c0 [<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0 [<ffffffff8123c8a2>] walk_page_vma+0x62/0x80 [<ffffffff81307656>] show_smap+0xa6/0x2b0 kernel BUG at fs/proc/task_mmu.c:585! RIP: 0010:[<ffffffff81306469>] [<ffffffff81306469>] smaps_pte_range+0x499/0x4b0 Call Trace: [<ffffffff814c2795>] ? vsnprintf+0x255/0x4c0 [<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0 [<ffffffff8123c8a2>] walk_page_vma+0x62/0x80 [<ffffffff81307696>] show_smap+0xa6/0x2b0 These locations are sanity checking page flags that must be set for an anonymous transparent huge page, but are not set for the zone_device pages associated with dax mappings. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 10 September 2016, 00:34:45 UTC
d0acc7d Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "This includes a couple of bugfixs for virtio. The virtio console patch is actually also in x86/tip targeting 4.9 because it helps vmap stacks, but it also fixes IOMMU_PLATFORM which was added in 4.8, and it seems important not to ship that in a broken configuration" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_console: Stop doing DMA on the stack virtio: mark vring_dma_dev() static 09 September 2016, 21:52:05 UTC
daf6b9b Merge tag 'pm-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "This includes a PM QoS framework fix from Tejun to prevent interrupts from being enabled unexpectedly during early boot and a cpufreq documentation fix. Specifics: - If the PM QoS framework invokes cancel_delayed_work_sync() during early boot, it will enable interrupts which is not expected at that point, so prevent it from happening (Tejun Heo) - Fix cpufreq statistic documentation to follow a recent change in behavior that forgot to update it as appropriate (Jean Delvare)" * tag 'pm-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq-stats: Minor documentation fix PM / QoS: avoid calling cancel_delayed_work_sync() during early boot 09 September 2016, 21:47:41 UTC
8a2a835 Merge branches 'pm-core-fixes' and 'pm-cpufreq-fixes' * pm-core-fixes: PM / QoS: avoid calling cancel_delayed_work_sync() during early boot * pm-cpufreq-fixes: cpufreq-stats: Minor documentation fix 09 September 2016, 20:34:16 UTC
c4a6c70 Merge tag 'gpio-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes that have been boiling the last two weeks or so. Nothing special, I'm trying to sort out some Kconfig business and Russell needs a fix in for -his SA1100 rework. Summary: - Revert a pointless attempt to add an include to solve the UM allyes compilation problem. - Make the mcp23s08 depend on OF_GPIO as it uses it and doesn't compile properly without it. - Fix a probing problem for ucb1x00" * tag 'gpio-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sa1100: fix irq probing for ucb1x00 gpio: mcp23s08: make driver depend on OF_GPIO Revert "gpio: include <linux/io-mapping.h> in gpiolib-of" 09 September 2016, 20:09:50 UTC
6dc728c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fix from Miklos Szeredi: "This fixes a deadlock when fuse, direct I/O and loop device are combined" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: direct-io: don't dirty ITER_BVEC pages 09 September 2016, 20:00:41 UTC
5c44ad6 Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fix from Miklos Szeredi: "This fixes a regression caused by the last pull request" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix workdir creation 09 September 2016, 19:56:28 UTC
f4a9c16 Merge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I'm not proud of how long it took me to track down that one liner in btrfs_sync_log(), but the good news is the patches I was trying to blame for these problems were actually fine (sorry Filipe)" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns btrfs: do not decrease bytes_may_use when replaying extents 09 September 2016, 19:52:31 UTC
067c2f4 Merge tag 'sound-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "We've got quite a few fixes at this time, and all are stable patches. syzkaller strikes back again (episode 19 or so), and we had to plug some holes in ALSA core part (mostly timer). In addition, a couple of FireWire audio fixes for the invalid copy user calls in locks, and a few quirks for HD-audio and USB-audio as usual are included" * tag 'sound-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: rawmidi: Fix possible deadlock with virmidi registration ALSA: timer: Fix zero-division by continue of uninitialized instance ALSA: timer: fix NULL pointer dereference in read()/ioctl() race ALSA: fireworks: accessing to user space outside spinlock ALSA: firewire-tascam: accessing to user space outside spinlock ALSA: hda - Enable subwoofer on Dell Inspiron 7559 ALSA: hda - Add headset mic quirk for Dell Inspiron 5468 ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114 ALSA: timer: fix NULL pointer dereference on memory allocation failure ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE 09 September 2016, 19:02:46 UTC
5e59d9a virtio_console: Stop doing DMA on the stack virtio_console uses a small DMA buffer for control requests. Move that buffer into heap memory. Doing virtio DMA on the stack is normally okay on non-DMA-API virtio systems (which is currently most of them), but it breaks completely if the stack is virtually mapped. Tested by typing both directions using picocom aimed at /dev/hvc0. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> 09 September 2016, 18:12:45 UTC
af7c1be virtio: mark vring_dma_dev() static We get 1 warning when building kernel with W=1: drivers/virtio/virtio_ring.c:170:16: warning: no previous prototype for 'vring_dma_dev' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 09 September 2016, 18:12:35 UTC
e45eeb4 Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - smp_mb__before_spinlock() changed to smp_mb() on arm64 since the generic definition to smp_wmb() is not sufficient - avoid a recursive loop with the graph tracer by using using preempt_(enable|disable)_notrace in _percpu_(read|write) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: use preempt_disable_notrace in _percpu_read/write arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb() 09 September 2016, 17:54:29 UTC
2771fc8 Merge tag 'powerpc-4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Don't alias user region to other regions below PAGE_OFFSET from Paul Mackerras - Fix again csum_partial_copy_generic() on 32-bit from Christophe Leroy - Fix corrupted PE allocation bitmap on releasing PE from Gavin Shan Fixes for code merged this cycle: - Fix crash on releasing compound PE from Gavin Shan - Fix processor numbers in OPAL ICP from Benjamin Herrenschmidt - Fix little endian build with CONFIG_KEXEC=n from Thiago Jung Bauermann" * tag 'powerpc-4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET powerpc/32: Fix again csum_partial_copy_generic() powerpc/powernv: Fix corrupted PE allocation bitmap on releasing PE powerpc/powernv: Fix crash on releasing compound PE powerpc/xics/opal: Fix processor numbers in OPAL ICP powerpc/pseries: Fix little endian build with CONFIG_KEXEC=n 09 September 2016, 15:43:42 UTC
53d5f1d Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "A few ARM fixes: - Robin Murphy noticed that the non-secure privileged entry was relying on undefined behaviour, which needed to be fixed. - Vladimir Murzin noticed that prov-v7 fails to build for MMUless configurations because a required header file wasn't included. - A bunch of fixes for StrongARM regressions found while testing 4.8-rc on such platforms" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: sa1100: clear reset status prior to reboot ARM: 8600/1: Enforce some NS-SVC initialisation ARM: 8599/1: mm: pull asm/memory.h explicitly ARM: sa1100: register clocks early ARM: sa1100: fix 3.6864MHz clock 09 September 2016, 15:32:10 UTC
6b98174 Merge tag 'fixes-for-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.8-rc6 Unfortunately we have a bogus dwc3 patch leaked through the cracks and got merged into Linus' HEAD. That patch ended up causing off-by-1 error in our TRB accounting logic. Thankfully John Youn found out the problem and we provided a revert to the bogus dwc3 patch in no time. Apart from this off-by-1 error, we have two fixes to the Renesas drivers, a small fix to our generic phy driver, a NULL pointer dereference fix for f_eem and a build warning fix in dwc3. 09 September 2016, 13:11:35 UTC
1b49dae Merge tag 'usb-ci-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fix the possible kernel panic when the hardware signal is bad for chipidea udc. 09 September 2016, 11:47:20 UTC
72d508a Merge tag 'iio-fixes-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.8 cycle. We have a big rework of the kxsd9 driver queued up behind the fix below and a fix for a recent fix that was marked for stable. Hence this fix series is perhaps a little more urgent than average for IIO. * core - a fix for a fix in the last set. The recent fix for blocking ops when ! task running left a path (unlikely one) in which the function return value was not set - so initialise it to 0. - The IIO_TYPE_FRACTIONAL code previously didn't cope with negative fractions. Turned out a fix for this was in Analog's tree but hadn't made it upstream. * bmc150 - reset chip at init time. At least one board out there ends up coming up in an unstable state due to noise during power up. The reset does no harm on other boards. * kxsd9 - Fix a bug in the reported scaling due to failing to set the integer part to 0. * hid-sensors-pressure - Output was in the wrong units to comply with the IIO ABI. * tools - iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault out for having no trigger when we explicitly said we didn't want to have one. 09 September 2016, 11:44:37 UTC
2b97434 arm64: use preempt_disable_notrace in _percpu_read/write When debug preempt or preempt tracer is enabled, preempt_count_add/sub() can be traced by function and function graph tracing, and preempt_disable/enable() would call preempt_count_add/sub(), so in Ftrace subsystem we should use preempt_disable/enable_notrace instead. In the commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") the function this_cpu_read() was added to trace_graph_entry(), and if this_cpu_read() calls preempt_disable(), graph tracer will go into a recursive loop, even if the tracing_on is disabled. So this patch change to use preempt_enable/disable_notrace instead in this_cpu_read(). Since Yonghui Yang helped a lot to find the root cause of this problem, so also add his SOB. Signed-off-by: Yonghui Yang <mark.yang@spreadtrum.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 09 September 2016, 11:34:47 UTC
872c63f arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb() smp_mb__before_spinlock() is intended to upgrade a spin_lock() operation to a full barrier, such that prior stores are ordered with respect to loads and stores occuring inside the critical section. Unfortunately, the core code defines the barrier as smp_wmb(), which is insufficient to provide the required ordering guarantees when used in conjunction with our load-acquire-based spinlock implementation. This patch overrides the arm64 definition of smp_mb__before_spinlock() to map to a full smp_mb(). Cc: <stable@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 09 September 2016, 11:33:48 UTC
6f3c4fb usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase Problems with the signal integrity of the high speed USB data lines or noise on reference ground lines can cause the i.MX6 USB controller to violate USB specs and exhibit unexpected behavior. It was observed that USBi_UI interrupts were triggered first and when isr_setup_status_phase was called, ci->status was NULL, which lead to a NULL pointer dereference kernel panic. This patch fixes the kernel panic, emits a warning once and returns -EPIPE to halt the device and let the host get stalled. It also adds a comment to point people, who are experiencing this issue, to their USB hardware design. Cc: <stable@vger.kernel.org> #4.1+ Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> 09 September 2016, 09:19:57 UTC
3732b30 cpufreq-stats: Minor documentation fix The cpufreq-stats code can no longer be built as a module, so it now appears with square brackets in menuconfig. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 1aefc75b2449 (cpufreq: stats: Make the stats code non-modular) Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 08 September 2016, 21:05:07 UTC
cbfff43 i2c: rk3x: Restore clock settings at resume time Depending on a number of factors including: - Which exact Rockchip SoC we're working with - How deep we suspend - Which i2c port we're on We might lose the state of the i2c registers at suspend time. Specifically we've found that on rk3399 the i2c ports that are not in the PMU power domain lose their state with the current suspend depth configured by ARM Tursted Firmware. Note that there are very few actual i2c registers that aren't configured per transfer anyway so all we actually need to re-configure are the clock config registers. We'll just add a call to rk3x_i2c_adapt_div() at resume time and be done with it. NOTE: On rk3399 on ports whose power was lost, I put printouts in at resume time. I saw things like: before: con=0x00010300, div=0x00060006 after: con=0x00010200, div=0x00180025 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: David Wu <david.wu@rock-chips.com> Tested-by: David Wu <david.wu@rock-chips.com> [wsa: removed duplicate const] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 08 September 2016, 20:50:33 UTC
e0603c8 i2c: Spelling s/acknowedge/acknowledge/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 08 September 2016, 20:22:20 UTC
664d58b i2c: designware: save the preset value of DW_IC_SDA_HOLD There are several ways to set the SDA hold time for i2c controller, including: Device Tree, built-in device properties and ACPI. However, if the SDA hold time is not specified by above method, we should read the value, where it is preset by firmware, and save it to sda_hold_time. This is needed because when i2c controller enters runtime suspend, the DW_IC_SDA_HOLD value will be reset to chipset default value. And during runtime resume, i2c_dw_init will be called to reconfigure i2c controller. If sda_hold_time is zero, the chipset default hold time will be used, that will be too short for some platforms. Therefore, to have a better tolerance, the DW_IC_SDA_HOLD value should be kept by sda_hold_time. Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 08 September 2016, 20:14:36 UTC
711bef6 Merge tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-client Pull ceph fix from Ilya Dryomov: "A fix for a 4.7 performance regression, caused by a typo in an if condition" * tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-client: ceph: do not modify fi->frag in need_reset_readdir() 08 September 2016, 19:23:13 UTC
acdfffb Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi-id: don't free dev structure after calling device_register 08 September 2016, 19:19:24 UTC
e8b3b45 Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a slightly larger batch of fixes that we've been sitting on a few -rcs. Most of them are simple oneliners, but there are two sets that are slightly larger and worth pointing out: - A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone SoC, among others). It's the only clock that ever has a valid offset of 0, so a new flag needed introduction once this problem was discovered. - A collection of CCI fixes for performance counters discovered once people started using it on X-Gene CPUs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) arm-cci: pmu: Fix typo in event name Revert "ARM: tegra: fix erroneous address in dts" ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name ARM: dts: kirkwood: Fix PCIe label on OpenRD ARM: kirkwood: ib62x0: fix size of u-boot environment partition bus: arm-ccn: make event groups reliable bus: arm-ccn: fix hrtimer registration bus: arm-ccn: fix PMU interrupt flags ARM: tegra: Correct polarity for Tegra114 PMIC interrupt MAINTAINERS: add tree entry for ARM/UniPhier architecture ARM: sun5i: Fix typo in trip point temperature MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski ARM: imx6ul: populates platform device at .init_machine bus: arm-ccn: Add missing event attribute exclusions for host/guest bus: arm-ccn: Correct required arguments for XP PMU events bus: arm-ccn: Fix XP watchpoint settings bitmask bus: arm-ccn: Do not attempt to configure XPs for cycle counter bus: arm-ccn: Fix PMU handling of MN ... 08 September 2016, 19:05:15 UTC
30851a7 Documentation: i2c: slave-interface: add note for driver development Make it clear that adding slave support shall not disable master functionality. We can have both, so we should. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 08 September 2016, 14:57:14 UTC
e35478e i2c: mux: demux-pinctrl: run properly with multiple instances We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 50a5ba87690814 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 08 September 2016, 14:56:21 UTC
816f318 ALSA: rawmidi: Fix possible deadlock with virmidi registration When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 September 2016, 08:45:20 UTC
9f8a765 ALSA: timer: Fix zero-division by continue of uninitialized instance When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb2c63a: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 September 2016, 08:45:05 UTC
9b41b92 dmi-id: don't free dev structure after calling device_register dmi_dev is freed in error exit code but, according to the document of device_register, it should never directly free device structure after calling this function, even if it returned an error! Use put_device() instead. Signed-off-by: Allen Hung <allen_hung@dell.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> 08 September 2016, 08:35:50 UTC
bcf42aa xhci: fix null pointer dereference in stop command timeout function The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 08 September 2016, 06:39:46 UTC
d71f058 Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fix from Zhang Rui: "Only one patch this time, which fixes a crash in rcar_thermal driver. From Dirk Behme" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar_thermal: Fix priv->zone error handling 08 September 2016, 04:28:26 UTC
95390e3 Merge tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.8 A single patch fixing a typo in the temperature trip points in the A13 DTSI. * tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun5i: Fix typo in trip point temperature Signed-off-by: Olof Johansson <olof@lixom.net> 08 September 2016, 04:25:08 UTC
1d3ef9c arm-cci: pmu: Fix typo in event name For one of the CCI events exposed under sysfs, "snoop" was typo'd as "snopp". Correct this such that users see the expected event name when enumerating events via sysfs. Cc: arm@kernel.org Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> 08 September 2016, 04:24:42 UTC
28fa991 Merge tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.8, 2nd round: - Fix misspelled "ti,x-plate-ohms" property name of touchscreen controller for imx7d-sdb DTS. - Add missing BM_CLPCR_BYPASS_PMIC_READY setting for i.MX6SX to get suspend/resume work properly. - Fix SPDIF regression on imx6qdl which caused by a clock update on spdif device node. * tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name Signed-off-by: Olof Johansson <olof@lixom.net> 08 September 2016, 04:24:22 UTC
d8b795f Revert "ARM: tegra: fix erroneous address in dts" This reverts commit b5c86b7496d74f6e454bcab5166efa023e1f0459. This is no longer needed due to other changes going into 4.8 to rename the unit addresses on a large number of device nodes. So it was picked up for v4.8-rc1 in error. Reported-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de> Signed-off-by: Olof Johansson <olof@lixom.net> 08 September 2016, 04:16:40 UTC
f077aaf powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET In commit c60ac5693c47 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac5693c47 ("powerpc: Update kernel VSID range") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 08 September 2016, 03:15:33 UTC
8540571 powerpc/32: Fix again csum_partial_copy_generic() Commit 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and len is lower than cacheline size. In that case the resulting csum value doesn't have to be rotated one byte because the cache-aligned copy part is skipped so no alignment is performed. Fixes: 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Cc: stable@vger.kernel.org # v4.6+ Reported-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 08 September 2016, 03:15:02 UTC
caa58f8 powerpc/powernv: Fix corrupted PE allocation bitmap on releasing PE In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e9167726c41 ("powerpc/powernv: Use PE instead of number during setup and release" Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 08 September 2016, 03:12:52 UTC
56beac9 gpio: sa1100: fix irq probing for ucb1x00 ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 07 September 2016, 22:42:57 UTC
60f749f gpio: mcp23s08: make driver depend on OF_GPIO The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 07 September 2016, 22:42:57 UTC
c6c8649 Revert "gpio: include <linux/io-mapping.h> in gpiolib-of" This reverts commit 7d4defe21c682c934a19fce1ba8b54b7bde61b08. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c91e56 ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc9195e ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 07 September 2016, 22:42:57 UTC
80a7704 Merge tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more hardened usercopyfixes from Kees Cook: - force check_object_size() to be inline too - move page-spanning check behind a CONFIG since it's triggering false positives [ Changed the page-spanning config option to depend on EXPERT in the merge. That way it still gets build testing, and you can enable it if you want to, but is never enabled for "normal" configurations ] * tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: remove page-spanning test for now usercopy: force check_object_size() inline 07 September 2016, 21:03:49 UTC
b7f3c7d Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.8 07 September 2016, 19:55:36 UTC
8e1f74e usercopy: remove page-spanning test for now A custom allocator without __GFP_COMP that copies to userspace has been found in vmw_execbuf_process[1], so this disables the page-span checker by placing it behind a CONFIG for future work where such things can be tracked down later. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326 Reported-by: Vinson Lee <vlee@freedesktop.org> Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Kees Cook <keescook@chromium.org> 07 September 2016, 18:33:26 UTC
a85d6b8 usercopy: force check_object_size() inline Just for good measure, make sure that check_object_size() is always inlined too, as already done for copy_*_user() and __copy_*_user(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> 07 September 2016, 18:33:26 UTC
ab29b33 Merge tag 'seccomp-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "Fix UM seccomp vs ptrace, after reordering landed" * tag 'seccomp-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Remove 2-phase API documentation um/ptrace: Fix the syscall number update after a ptrace um/ptrace: Fix the syscall_trace_leave call 07 September 2016, 17:46:06 UTC
08411a7 Merge tag 'usercopy-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy fixes from Kees Cook: - inline copy_*_user() for correct use of __builtin_const_p() for hardened usercopy and the recent compile-time checks. - switch hardened usercopy to only check non-const size arguments to avoid meaningless checks on likely-sane const values. - update lkdtm usercopy tests to compenstate for the const checking. * tag 'usercopy-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: adjust usercopy tests to bypass const checks usercopy: fold builtin_const check into inline function x86/uaccess: force copy_*_user() to be inlined 07 September 2016, 16:29:36 UTC
4fadd04 seccomp: Remove 2-phase API documentation Fixes: 8112c4f140fa ("seccomp: remove 2-phase API") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org> 07 September 2016, 16:25:05 UTC
ce29856 um/ptrace: Fix the syscall number update after a ptrace Update the syscall number after each PTRACE_SETREGS on ORIG_*AX. This is needed to get the potentially altered syscall number in the seccomp filters after RET_TRACE. This fix four seccomp_bpf tests: > [ RUN ] TRACE_syscall.skip_after_RET_TRACE > seccomp_bpf.c:1560:TRACE_syscall.skip_after_RET_TRACE:Expected -1 (18446744073709551615) == syscall(39) (26) > seccomp_bpf.c:1561:TRACE_syscall.skip_after_RET_TRACE:Expected 1 (1) == (*__errno_location ()) (22) > [ FAIL ] TRACE_syscall.skip_after_RET_TRACE > [ RUN ] TRACE_syscall.kill_after_RET_TRACE > TRACE_syscall.kill_after_RET_TRACE: Test exited normally instead of by signal (code: 1) > [ FAIL ] TRACE_syscall.kill_after_RET_TRACE > [ RUN ] TRACE_syscall.skip_after_ptrace > seccomp_bpf.c:1622:TRACE_syscall.skip_after_ptrace:Expected -1 (18446744073709551615) == syscall(39) (26) > seccomp_bpf.c:1623:TRACE_syscall.skip_after_ptrace:Expected 1 (1) == (*__errno_location ()) (22) > [ FAIL ] TRACE_syscall.skip_after_ptrace > [ RUN ] TRACE_syscall.kill_after_ptrace > TRACE_syscall.kill_after_ptrace: Test exited normally instead of by signal (code: 1) > [ FAIL ] TRACE_syscall.kill_after_ptrace Fixes: 26703c636c1f ("um/ptrace: run seccomp after ptrace") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: James Morris <jmorris@namei.org> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org> 07 September 2016, 16:25:04 UTC
972939e um/ptrace: Fix the syscall_trace_leave call Keep the same semantic as before the commit 26703c636c1f: deallocate audit context and fake a proper syscall exit. This fix a kernel panic triggered by the seccomp_bpf test: > [ RUN ] global.ERRNO_valid > BUG: failure at kernel/auditsc.c:1504/__audit_syscall_entry()! > Kernel panic - not syncing: BUG! Fixes: 26703c636c1f ("um/ptrace: run seccomp after ptrace") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: James Morris <jmorris@namei.org> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org> 07 September 2016, 16:25:04 UTC
696118c usb: dwc3: pci: fix build warning on !PM_SLEEP When building a kernel with CONFIG_PM_SLEEP=n, we get the following warning: drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used In order to fix this, we should only define dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined. Fixes: f6c274e11e3b ("usb: dwc3: pci: runtime_resume child device") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 07 September 2016, 12:37:36 UTC
d060e0f Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "This is the second pull request for the rdma subsystem. Most of the patches are small and obvious. I took two patches in that are larger than I wanted this late in the cycle. The first is the hfi1 patch that implements a work queue to test the QSFP read state. I originally rejected the first patch for this (which would have place up to 20 seconds worth of udelays in their probe routine). They then rewrote it the way I wanted (use delayed work tasks to wait asynchronously up to 20 seconds for the QSFP to come alive), so I can't really complain about the size of getting what I asked for :-/. The second is large because it switches the rcu locking in the debugfs code. Since a locking change like this is done all at once, the size it what it is. It resolves a litany of debug messages from the kernel, so I pulled it in for -rc. The rest are all typical -rc worthy patches I think. There will still be a third -rc pull request from the rdma subsystem this release. I hope to have that one ready to go by the end of this week or early next. Summary: - a smattering of small fixes across the core, ipoib, i40iw, isert, cxgb4, and mlx4 - a slightly larger group of fixes to each of mlx5 and hfi1" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hfi1: Rework debugfs to use SRCU IB/hfi1: Make n_krcvqs be an unsigned long integer IB/hfi1: Add QSFP sanity pre-check IB/hfi1: Fix AHG KDETH Intr shift IB/hfi1: Fix SGE length for misaligned PIO copy IB/mlx5: Don't return errors from poll_cq IB/mlx5: Use TIR number based on selector IB/mlx5: Simplify code by removing return variable IB/mlx5: Return EINVAL when caller specifies too many SGEs IB/mlx4: Don't return errors from poll_cq Revert "IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one" IB/ipoib: Fix memory corruption in ipoib cm mode connect flow IB/core: Fix use after free in send_leave function IB/cxgb4: Make _free_qp static to silence build warning IB/isert: Properly release resources on DEVICE_REMOVAL IB/hfi1: Fix the size parameter to find_first_bit IB/mlx5: Fix the size parameter to find_first_bit IB/hfi1: Clean up type used and casting i40iw: Receive notification events correctly i40iw: Update hw_iwarp_state 06 September 2016, 19:33:12 UTC
3c17648 lkdtm: adjust usercopy tests to bypass const checks The hardened usercopy is now consistently avoiding checks against const sizes, since we really only want to perform runtime bounds checking on lengths that weren't known at build time. To test the hardened usercopy code, we must force the length arguments to be seen as non-const. Signed-off-by: Kees Cook <keescook@chromium.org> 06 September 2016, 19:17:30 UTC
81409e9 usercopy: fold builtin_const check into inline function Instead of having each caller of check_object_size() need to remember to check for a const size parameter, move the check into check_object_size() itself. This actually matches the original implementation in PaX, though this commit cleans up the now-redundant builtin_const() calls in the various architectures. Signed-off-by: Kees Cook <keescook@chromium.org> 06 September 2016, 19:17:29 UTC
e697100 x86/uaccess: force copy_*_user() to be inlined As already done with __copy_*_user(), mark copy_*_user() as __always_inline. Without this, the checks for things like __builtin_const_p() won't work consistently in either hardened usercopy nor the recent adjustments for detecting usercopy overflows at compile time. The change in kernel text size is detectable, but very small: text data bss dec hex filename 12118735 5768608 14229504 32116847 1ea106f vmlinux.before 12120207 5768608 14229504 32118319 1ea162f vmlinux.after Signed-off-by: Kees Cook <keescook@chromium.org> 06 September 2016, 19:16:42 UTC
46738ab Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox fixes from Jassi Brar: "Misc fixes for BCM mailbox driver - Fix build warnings by making static functions used within the file. - Check for potential NULL before dereferencing - Fix link error by defining HAS_DMA dependency" * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: fix:mailbox:bcm-pdc-mailbox:mark symbols static where possible mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown() mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX 06 September 2016, 18:15:07 UTC
6296c41 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is really three fixes, but the SES one comes in a bundle of three (making the replacement API available properly, using it and removing the non-working one). The SES problem causes an oops on hpsa devices because they attach virtual disks to the host which aren't SAS attached (the replacement API ignores them). The other two fixes are fairly minor: the sense key one means we actually resolve a newly added sense key and the RDAC device blacklisting is needed to prevent us annoying the universal XPORT lun of various RDAC arrays" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sas: remove is_sas_attached() scsi: ses: use scsi_is_sas_rphy instead of is_sas_attached scsi: sas: provide stub implementation for scsi_is_sas_rphy scsi: blacklist all RDAC devices for BLIST_NO_ULD_ATTACH scsi: fix upper bounds check of sense key in scsi_sense_key_string() 06 September 2016, 18:06:52 UTC
ec9a03d Merge tag 'regmap-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Several fixes here, the main one being the change from Lars-Peter which I'd been letting soak in -next since the merge window in case it uncovered further issues as it's a minimal fix rather than a change addressing the root cause of the problems (which would've been too invasive for -rc): - The biggest change is a fix from Lars-Peter to ensure that we don't create overlapping rbtree nodes which in turn avoids returning corrupt cache values to users, fixing some issues that were exposed by some recent optimisations with certain access patterns but had been present for a long time. - A fix from Elaine Zhang to stop us updating the cache if we get an I/O error when writing to the hardware. - A fix fromm Maarten ter Huurne to avoid uninitialized defaults in cases where we have non-readable registers but are initializing the cache by reading from the device" * tag 'regmap-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: drop cache if the bus transfer error regmap: rbtree: Avoid overlapping nodes regmap: cache: Fix num_reg_defaults computation from reg_defaults_raw 06 September 2016, 18:02:36 UTC
8ded8f0 Merge tag 'spi-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "As well as the usual driver fixes there's a couple of non-trivial core fixes in here: - Fixes for issues reported by Julia Lawall in the changes that were sent last time to fix interaction between the bus lock and the locking done for the SPI thread. I'd let this one cook for a while to make sure nothing else came up in testing. - A fix from Sien Wu for arithmetic overflows when calculating the timeout for larger transfers (espcially common with slow buses with flashes on them)" * tag 'spi-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Prevent unexpected SPI time out due to arithmetic overflow spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devices MAINTAINERS: add myself as Samsung SPI maintainer spi: Drop io_mutex in error paths spi: sh-msiof: Avoid invalid clock generator parameters spi: img-spfi: Remove spi_master_put in img_spfi_remove() spi: mediatek: remove spi_master_put in mtk_spi_remove() spi: qup: Remove spi_master_put in spi_qup_remove() 06 September 2016, 17:59:44 UTC
8fa5729 Merge tag 'regulator-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two things here, one an e-mail update for Krzysztof Kozlowski and the other a couple of fixes for issues with incorrectly described voltages in a couple of the Qualcomm regulator drivers that were breaking MMC on some platforms" * tag 'regulator-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Change Krzysztof Kozlowski's email to kernel.org regulator: qcom_smd: Fix voltage ranges for pma8084 ftsmps and pldo regulator: qcom_smd: Fix voltage ranges for pm8x41 06 September 2016, 17:43:54 UTC
4c601e0 Merge tag 'pinctrl-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Nothing special at all, just three SoC-specific driver fixes: - Fix routing problems in pistachio (Imagination) and sunxi (AllWinner) - Fix an interrupt problem in the Cherryview (Intel)" * tag 'pinctrl-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33 pinctrl: cherryview: Do not mask all interrupts in probe pinctrl: pistachio: fix mfio pll_lock pinmux 06 September 2016, 17:36:12 UTC
ce12965 btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress In btrfs_async_reclaim_metadata_space(), we use ticket's address to determine whether asynchronous metadata reclaim work is making progress. ticket = list_first_entry(&space_info->tickets, struct reserve_ticket, list); if (last_ticket == ticket) { flush_state++; } else { last_ticket = ticket; flush_state = FLUSH_DELAYED_ITEMS_NR; if (commit_cycles) commit_cycles--; } But indeed it's wrong, we should not rely on local variable's address to do this check, because addresses may be same. In my test environment, I dd one 168MB file in a 256MB fs, found that for this file, every time wait_reserve_ticket() called, local variable ticket's address is same, For above codes, assume a previous ticket's address is addrA, last_ticket is addrA. Btrfs_async_reclaim_metadata_space() finished this ticket and wake up it, then another ticket is added, but with the same address addrA, now last_ticket will be same to current ticket, then current ticket's flush work will start from current flush_state, not initial FLUSH_DELAYED_ITEMS_NR, which may result in some enospc issues(I have seen this in my test machine). Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> 06 September 2016, 14:31:43 UTC
cbd60aa Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns We use a btrfs_log_ctx structure to pass information into the tree log commit, and get error values out. It gets added to a per log-transaction list which we walk when things go bad. Commit d1433debe added an optimization to skip waiting for the log commit, but didn't take root_log_ctx out of the list. This patch makes sure we remove things before exiting. Signed-off-by: Chris Mason <clm@fb.com> Fixes: d1433debe7f4346cf9fc0dafc71c3137d2a97bc4 cc: stable@vger.kernel.org # 3.15+ 06 September 2016, 12:57:25 UTC
87260d3 thermal: rcar_thermal: Fix priv->zone error handling In case thermal_zone_xxx_register() returns an error, priv->zone isn't NULL any more, but contains the error code. This is passed to thermal_zone_device_unregister(), then. This checks for priv->zone being NULL, but the error code is != NULL. So it works with the error code as a pointer. Crashing immediately. To fix this, reset priv->zone to NULL before entering rcar_gen3_thermal_remove(). Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Zhang Rui <rui.zhang@intel.com> 06 September 2016, 12:46:06 UTC
ae4860b Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', 'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus 06 September 2016, 11:32:09 UTC
78cefcb Merge remote-tracking branches 'regulator/fix/email' and 'regulator/fix/qcom-smd' into regulator-linus 06 September 2016, 11:31:34 UTC
3ff488a usb: gadget: prevent potenial null pointer dereference on skb->len An earlier fix partially fixed the null pointer dereference on skb->len by moving the assignment of len after the check on skb being non-null, however it failed to remove the erroneous dereference when assigning len. Correctly fix this by removing the initialisation of len as was originally intended. Fixes: 70237dc8efd092 ("usb: gadget: function: f_eem: socket buffer may be NULL") Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 06 September 2016, 07:44:03 UTC
b314427 powerpc/powernv: Fix crash on releasing compound PE The compound PE is created to accommodate the devices attached to one specific PCI bus that consume multiple M64 segments. The compound PE is made up of one master PE and possibly multiple slave PEs. The slave PEs should be destroyed when releasing the master PE. A kernel crash happens when derferencing @pe->pdev on releasing the slave PE in pnv_ioda_deconfigure_pe(). # echo 0 > /sys/bus/pci/slots/C7/power iommu: Removing device 0000:01:00.1 from group 0 iommu: Removing device 0000:01:00.0 from group 0 Unable to handle kernel paging request for data at address 0x00000010 Faulting instruction address: 0xc00000000005d898 cpu 0x1: Vector: 300 (Data Access) at [c000000fe8217620] pc: c00000000005d898: pnv_ioda_release_pe+0x288/0x610 lr: c00000000005dbdc: pnv_ioda_release_pe+0x5cc/0x610 sp: c000000fe82178a0 msr: 9000000000009033 dar: 10 dsisr: 40000000 current = 0xc000000fe815ab80 paca = 0xc00000000ff00400 softe: 0 irq_happened: 0x01 pid = 2709, comm = sh Linux version 4.8.0-rc5-gavin-00006-g745efdb (gwshan@gwshan) \ (gcc version 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #586 SMP \ Tue Sep 6 13:37:29 AEST 2016 enter ? for help [c000000fe8217940] c00000000005d684 pnv_ioda_release_pe+0x74/0x610 [c000000fe82179e0] c000000000034460 pcibios_release_device+0x50/0x70 [c000000fe8217a10] c0000000004aba80 pci_release_dev+0x50/0xa0 [c000000fe8217a40] c000000000704898 device_release+0x58/0xf0 [c000000fe8217ac0] c000000000470510 kobject_release+0x80/0xf0 [c000000fe8217b00] c000000000704dd4 put_device+0x24/0x40 [c000000fe8217b20] c0000000004af94c pci_remove_bus_device+0x12c/0x150 [c000000fe8217b60] c000000000034244 pci_hp_remove_devices+0x94/0xd0 [c000000fe8217ba0] c0000000004ca444 pnv_php_disable_slot+0x64/0xb0 [c000000fe8217bd0] c0000000004c88c0 power_write_file+0xa0/0x190 [c000000fe8217c50] c0000000004c248c pci_slot_attr_store+0x3c/0x60 [c000000fe8217c70] c0000000002d6494 sysfs_kf_write+0x94/0xc0 [c000000fe8217cb0] c0000000002d50f0 kernfs_fop_write+0x180/0x260 [c000000fe8217d00] c0000000002334a0 __vfs_write+0x40/0x190 [c000000fe8217d90] c000000000234738 vfs_write+0xc8/0x240 [c000000fe8217de0] c000000000236250 SyS_write+0x60/0x110 [c000000fe8217e30] c000000000009524 system_call+0x38/0x108 It fixes the kernel crash by bypassing releasing resources (DMA, IO and memory segments, PELTM) because there are no resources assigned to the slave PE. Fixes: c5f7700bbd2e ("powerpc/powernv: Dynamically release PE") Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 06 September 2016, 04:54:46 UTC
f8e3347 powerpc/xics/opal: Fix processor numbers in OPAL ICP When using the OPAL ICP backend we incorrectly pass Linux CPU numbers rather than HW CPU numbers to OPAL. Fixes: d74361881f0d ("powerpc/xics: Add ICP OPAL backend") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 06 September 2016, 04:54:45 UTC
d81d825 powerpc/pseries: Fix little endian build with CONFIG_KEXEC=n On ppc64le, builds with CONFIG_KEXEC=n fail with: arch/powerpc/platforms/pseries/setup.c: In function ‘pseries_big_endian_exceptions’: arch/powerpc/platforms/pseries/setup.c:403:13: error: implicit declaration of function ‘kdump_in_progress’ if (rc && !kdump_in_progress()) This is because pseries/setup.c includes <linux/kexec.h>, but kdump_in_progress() is defined in <asm/kexec.h>. This is a problem because the former only includes the latter if CONFIG_KEXEC_CORE=y. Fix it by including <asm/kexec.h> directly, as is done in powernv/setup.c. Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place") Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 06 September 2016, 04:54:08 UTC
171c009 iio:core: fix IIO_VAL_FRACTIONAL sign handling 7985e7c100 ("iio: Introduce a new fractional value type") introduced a new IIO_VAL_FRACTIONAL value type meant to represent rational type numbers expressed by a numerator and denominator combination. Formating of IIO_VAL_FRACTIONAL values relies upon do_div() usage. This fails handling negative values properly since parameters are reevaluated as unsigned values. Fix this by using div_s64_rem() instead. Computed integer part will carry properly signed value. Formatted fractional part will always be positive. Fixes: 7985e7c100 ("iio: Introduce a new fractional value type") Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 05 September 2016, 20:21:32 UTC
5dba4b1 iio: ensure ret is initialized to zero before entering do loop A recent fix to iio_buffer_read_first_n_outer removed ret from being set by a return from wait_event_interruptible and also added a continue in a loop which causes the variable ret to not be set when it reaches the end of the loop. Fix this by initializing ret to zero. Also remove extraneous white space at the end of the loop. Fixes: fcf68f3c0bb2a5 ("fix sched WARNING "do not call blocking ops when !TASK_RUNNING") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 05 September 2016, 20:00:14 UTC
bc4dee5 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a regression in the cryptd code that breaks certain accelerated AED algorithms as well as an older regression in the caam driver that breaks IPsec" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix IV loading for authenc (giv)decryption crypto: cryptd - Use correct tfm object for AEAD tracking 05 September 2016, 18:10:00 UTC
56291b2 Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "Fix for 'make deb-pkg'. The bug got introduced in v4.8-rc1" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: builddeb: Skip gcc-plugins when not configured 05 September 2016, 17:55:55 UTC
ed7a694 btrfs: do not decrease bytes_may_use when replaying extents When replaying extents, there is no need to update bytes_may_use in btrfs_alloc_logged_file_extent(), otherwise it'll trigger a WARN_ON about bytes_may_use. Fixes: ("btrfs: update btrfs_space_info's bytes_may_use timely") Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> 05 September 2016, 15:40:41 UTC
c86d06b PM / QoS: avoid calling cancel_delayed_work_sync() during early boot of_clk_init() ends up calling into pm_qos_update_request() very early during boot where irq is expected to stay disabled. pm_qos_update_request() uses cancel_delayed_work_sync() which correctly assumes that irq is enabled on invocation and unconditionally disables and re-enables it. Gate cancel_delayed_work_sync() invocation with kevented_up() to avoid enabling irq unexpectedly during early boot. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Qiao Zhou <qiaozhou@asrmicro.com> Link: http://lkml.kernel.org/r/d2501c4c-8e7b-bea3-1b01-000b36b5dfe9@asrmicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 05 September 2016, 13:07:53 UTC
0f5aa88 ceph: do not modify fi->frag in need_reset_readdir() Commit f3c4ebe65ea1 ("ceph: using hash value to compose dentry offset") modified "if (fpos_frag(new_pos) != fi->frag)" to "if (fi->frag |= fpos_frag(new_pos))" in need_reset_readdir(), thus replacing a comparison operator with an assignment one. This looks like a typo which is reported by clang when building the kernel with some warning flags: fs/ceph/dir.c:600:22: error: using the result of an assignment as a condition without parentheses [-Werror,-Wparentheses] } else if (fi->frag |= fpos_frag(new_pos)) { ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ fs/ceph/dir.c:600:22: note: place parentheses around the assignment to silence this warning } else if (fi->frag |= fpos_frag(new_pos)) { ^ ( ) fs/ceph/dir.c:600:22: note: use '!=' to turn this compound assignment into an inequality comparison } else if (fi->frag |= fpos_frag(new_pos)) { ^~ != Fixes: f3c4ebe65ea1 ("ceph: using hash value to compose dentry offset") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 05 September 2016, 12:30:35 UTC
e1ff3dd ovl: fix workdir creation Workdir creation fails in latest kernel. Fix by allowing EOPNOTSUPP as a valid return value from vfs_removexattr(XATTR_NAME_POSIX_ACL_*). Upper filesystem may not support ACL and still be perfectly able to support overlayfs. Reported-by: Martin Ziegler <ziegler@uni-freiburg.de> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: c11b9fdd6a61 ("ovl: remove posix_acl_default from workdir") Cc: <stable@vger.kernel.org> 05 September 2016, 11:55:20 UTC
519d8bd usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 05 September 2016, 10:39:23 UTC
7c113f7 usb: phy: phy-generic: Check clk_prepare_enable() error clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 05 September 2016, 10:39:23 UTC
b2f1eaa usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON This driver should clear the bit. Otherwise, the VBUS will output wrongly if the usb port on a board has VBUS output capability. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 05 September 2016, 10:39:23 UTC
9d7aba7 Revert "usb: dwc3: gadget: always decrement by 1" This reverts commit 6f8245b4e37c ("usb: dwc3: gadget: always decrement by 1"). We can't always decrement this value. We should decrement only if the calculation of free slots results in a LINK TRB being among one of the free slots (dequeue < enqueue). Otherwise, if the LINK TRB is not among the free slots then it should not be decremented. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 05 September 2016, 10:39:23 UTC
f065e9e ARM: dts: imx6qdl: Fix SPDIF regression Commit 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif") changed many more clocks than only the SPDIF core clock as stated in the commit message. The MLB clock has been added and this causes SPDIF regression as reported by Xavi Drudis Ferran and also in this forum post: https://forum.digikey.com/thread/34240 The MX6Q Reference Manual does not mention that MLB is a clock related to SPDIF, so change it back to a dummy clock to restore SPDIF functionality. Thanks to Ambika for providing the fix at: https://community.nxp.com/thread/387131 Fixes: 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif") Cc: <stable@vger.kernel.org> # 4.4.x Reported-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Signed-off-by: Shawn Guo <shawnguo@kernel.org> 05 September 2016, 02:30:58 UTC
c693593 Linux 4.8-rc5 04 September 2016, 21:31:46 UTC
back to top