https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
08895a8 Linux 4.8-rc8 26 September 2016, 01:47:13 UTC
4c04b4b Merge tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracefs fixes from Steven Rostedt: "Al Viro has been looking at the tracefs code, and has pointed out some issues. This contains one fix by me and one by Al. I'm sure that he'll come up with more but for now I tested these patches and they don't appear to have any negative impact on tracing" * tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data 26 September 2016, 01:40:13 UTC
90b75db fault_in_multipages_readable() throws set-but-unused error When building XFS with -Werror, it now fails with: include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:602:16: error: variable 'c' set but not used [-Werror=unused-but-set-variable] volatile char c; ^ This is a regression caused by commit e23d4159b109 ("fix fault_in_multipages_...() on architectures with no-op access_ok()"). Fix it by re-adding the "(void)c" trick taht was previously used to make the compiler think the variable is used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 September 2016, 01:16:44 UTC
38e0885 mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing The NUMA balancing logic uses an arch-specific PROT_NONE page table flag defined by pte_protnone() or pmd_protnone() to mark PTEs or huge page PMDs respectively as requiring balancing upon a subsequent page fault. User-defined PROT_NONE memory regions which also have this flag set will not normally invoke the NUMA balancing code as do_page_fault() will send a segfault to the process before handle_mm_fault() is even called. However if access_remote_vm() is invoked to access a PROT_NONE region of memory, handle_mm_fault() is called via faultin_page() and __get_user_pages() without any access checks being performed, meaning the NUMA balancing logic is incorrectly invoked on a non-NUMA memory region. A simple means of triggering this problem is to access PROT_NONE mmap'd memory using /proc/self/mem which reliably results in the NUMA handling functions being invoked when CONFIG_NUMA_BALANCING is set. This issue was reported in bugzilla (issue 99101) which includes some simple repro code. There are BUG_ON() checks in do_numa_page() and do_huge_pmd_numa_page() added at commit c0e7cad to avoid accidentally provoking strange behaviour by attempting to apply NUMA balancing to pages that are in fact PROT_NONE. The BUG_ON()'s are consistently triggered by the repro. This patch moves the PROT_NONE check into mm/memory.c rather than invoking BUG_ON() as faulting in these pages via faultin_page() is a valid reason for reaching the NUMA check with the PROT_NONE page table flag set and is therefore not always a bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99101 Reported-by: Trevor Saunders <tbsaunde@tbsaunde.org> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2016, 22:43:42 UTC
831e45d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "A round of 4.8 fixes: MIPS generic code: - Add a missing ".set pop" in an early commit - Fix memory regions reaching top of physical - MAAR: Fix address alignment - vDSO: Fix Malta EVA mapping to vDSO page structs - uprobes: fix incorrect uprobe brk handling - uprobes: select HAVE_REGS_AND_STACK_ACCESS_API - Avoid a BUG warning during PR_SET_FP_MODE prctl - SMP: Fix possibility of deadlock when bringing CPUs online - R6: Remove compact branch policy Kconfig entries - Fix size calc when avoiding IPIs for small icache flushes - Fix pre-r6 emulation FPU initialisation - Fix delay slot emulation count in debugfs ATH79: - Fix test for error return of clk_register_fixed_factor. Octeon: - Fix kernel header to work for VDSO build. - Fix initialization of platform device probing. paravirt: - Fix undefined reference to smp_bootstrap" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online MIPS: Fix pre-r6 emulation FPU initialisation MIPS: vDSO: Fix Malta EVA mapping to vDSO page structs MIPS: Select HAVE_REGS_AND_STACK_ACCESS_API MIPS: Octeon: Fix platform bus probing MIPS: Octeon: mangle-port: fix build failure with VDSO code MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...) MIPS: c-r4k: Fix size calc when avoiding IPIs for small icache flushes MIPS: Add a missing ".set pop" in an early commit MIPS: paravirt: Fix undefined reference to smp_bootstrap MIPS: Remove compact branch policy Kconfig entries MIPS: MAAR: Fix address alignment MIPS: Fix memory regions reaching top of physical MIPS: uprobes: fix incorrect uprobe brk handling MIPS: ath79: Fix test for error return of clk_register_fixed_factor(). 25 September 2016, 20:59:52 UTC
751b9a5 Merge tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull one more powerpc fix from Michael Ellerman: "powernv/pci: Fix m64 checks for SR-IOV and window alignment from Russell Currey" * tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment 25 September 2016, 20:52:59 UTC
8d2c0d3 radix tree: fix sibling entry handling in radix_tree_descend() The fixes to the radix tree test suite show that the multi-order case is broken. The basic reason is that the radix tree code uses tagged pointers with the "internal" bit in the low bits, and calculating the pointer indices was supposed to mask off those bits. But gcc will notice that we then use the index to re-create the pointer, and will avoid doing the arithmetic and use the tagged pointer directly. This cleans the code up, using the existing is_sibling_entry() helper to validate the sibling pointer range (instead of open-coding it), and using entry_to_node() to mask off the low tag bit from the pointer. And once you do that, you might as well just use the now cleaned-up pointer directly. [ Side note: the multi-order code isn't actually ever used in the kernel right now, and the only reason I didn't just delete all that code is that Kirill Shutemov piped up and said: "Well, my ext4-with-huge-pages patchset[1] uses multi-order entries. It also converts shmem-with-huge-pages and hugetlb to them. I'm okay with converting it to other mechanism, but I need something. (I looked into Konstantin's RFC patchset[2]. It looks okay, but I don't feel myself qualified to review it as I don't know much about radix-tree internals.)" [1] http://lkml.kernel.org/r/20160915115523.29737-1-kirill.shutemov@linux.intel.com [2] http://lkml.kernel.org/r/147230727479.9957.1087787722571077339.stgit@zurg ] Reported-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Cedric Blancher <cedric.blancher@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2016, 20:32:46 UTC
62fd525 radix tree test suite: Test radix_tree_replace_slot() for multiorder entries When we replace a multiorder entry, check that all indices reflect the new value. Also, compile the test suite with -O2, which shows other problems with the code due to some dodgy pointer operations in the radix tree code. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2016, 18:49:16 UTC
1ae2293 fix memory leaks in tracing_buffers_splice_read() Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 25 September 2016, 17:30:13 UTC
1245800 tracing: Move mutex to protect against resetting of seq data The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f45694 ("tracing/core: make the read callbacks reentrants") Cc: stable@vger.kernel.org # 2.6.30+ Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 25 September 2016, 14:27:08 UTC
116e711 MIPS: Fix delay slot emulation count in debugfs Commit 432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions") accidentally removed use of the MIPS_FPU_EMU_INC_STATS macro from do_dsemulret, leading to the ds_emul file in debugfs always returning zero even though we perform delay slot emulations. Fix this by re-adding the use of the MIPS_FPU_EMU_INC_STATS macro. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14301/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 September 2016, 23:59:16 UTC
8f46cca MIPS: SMP: Fix possibility of deadlock when bringing CPUs online This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reported-by: Justin Chen <justinpopo6@gmail.com> Tested-by: Justin Chen <justinpopo6@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14302/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 September 2016, 23:43:52 UTC
9c0e28a Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixlets for perf: - add a missing NULL pointer check in the intel BTS driver - make BTS an exclusive PMU because BTS can only handle one event at a time - ensure that exclusive events are limited to one PMU so that several exclusive events can be scheduled on different PMU instances" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Limit matching exclusive events to one PMU perf/x86/intel/bts: Make it an exclusive PMU perf/x86/intel/bts: Make sure debug store is valid 24 September 2016, 19:44:28 UTC
2507c85 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two smallish fixes: - use the proper asm constraint in the Super-H atomic_fetch_ops - a trivial typo fix in the Kconfig help text" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP() 24 September 2016, 19:41:19 UTC
709b8f6 Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Two fixes for EFI/PAT: - a 32bit overflow bug in the PAT code which was unearthed by the large EFI mappings - prevent a boot hang on large systems when EFI mixed mode is enabled but not used" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Only map RAM into EFI page tables if in mixed-mode x86/mm/pat: Prevent hang during boot when mapping pages 24 September 2016, 19:35:26 UTC
4b8b0ff Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three fixes for irq core and irq chip drivers: - Do not set the irq type if type is NONE. Fixes a boot regression on various SoCs - Use the proper cpu for setting up the GIC target list. Discovered by the cpumask debugging code. - A rather large fix for the MIPS-GIC so per cpu local interrupts work again. This was discovered late because the code falls back to slower timers which use normal device interrupts" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Fix local interrupts irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE 24 September 2016, 19:30:12 UTC
0f26574 Merge branch 'hughd-fixes' (patches from Hugh Dickins) Merge VM fixes from High Dickins: "I get the impression that Andrew is away or busy at the moment, so I'm going to send you three independent uncontroversial little mm fixes directly - though none is strictly a 4.8 regression fix. - shmem: fix tmpfs to handle the huge= option properly from Toshi Kani is a one-liner to fix a major embarrassment in 4.8's hugepages on tmpfs feature: although Hillf pointed it out in June, somehow both Kirill and I repeatedly dropped the ball on this one. You might wonder if the feature got tested at all with that bug in: yes, it did, but for wider testing coverage, Kirill and I had each relied too much on an override which bypasses that condition. - huge tmpfs: fix Committed_AS leak just a run-of-the-mill accounting fix in the same feature. - mm: delete unnecessary and unsafe init_tlb_ubc() is an unrelated fix to 4.3's TLB flush batching in reclaim: the bug would be rare, and none of us will be shamed if this one misses 4.8; but it got such a quick ack from Mel today that I'm inclined to offer it along with the first two" * emailed patches from Hugh Dickins <hughd@google.com>: mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly 24 September 2016, 18:31:45 UTC
b385d21 mm: delete unnecessary and unsafe init_tlb_ubc() init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically initialized with zeroes in the init_task, and copied from parent to child while it is quiescent in arch_dup_task_struct(); so I went to delete it. But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to check that it was always empty at that point, and found them firing: because memcg reclaim can recurse into global reclaim (when allocating biosets for swapout in my case), and arrive back at the init_tlb_ubc() in shrink_node_memcg(). Resetting tlb_ubc.flush_required at that point is wrong: if the upper level needs a deferred TLB flush, but the lower level turns out not to, we miss a TLB flush. But fortunately, that's the only part of the protocol that does not nest: with the initialization removed, cpumask collects bits from upper and lower levels, and flushes TLB when needed. Fixes: 72b252aed506 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2016, 18:20:01 UTC
7166466 huge tmpfs: fix Committed_AS leak Under swapping load on huge tmpfs, /proc/meminfo's Committed_AS grows bigger and bigger: just a cosmetic issue for most users, but disabling for those who run without overcommit (/proc/sys/vm/overcommit_memory 2). shmem_uncharge() was forgetting to unaccount __vm_enough_memory's charge, and shmem_charge() was forgetting it on the filesystem-full error path. Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2016, 18:20:01 UTC
3089bf6 shmem: fix tmpfs to handle the huge= option properly shmem_get_unmapped_area() checks SHMEM_SB(sb)->huge incorrectly, which leads to a reversed effect of "huge=" mount option. Fix the check in shmem_get_unmapped_area(). Note, the default value of SHMEM_SB(sb)->huge remains as SHMEM_HUGE_NEVER. User will need to specify "huge=" option to enable huge page mappings. Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2016, 18:20:01 UTC
bd5dbcb Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Three driver bugfixes: fixing uninitialized memory pointers (eg20t), pm/clock imbalance (qup), and a wrongly set cached variable (pc954x)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended i2c: mux: pca954x: retry updating the mux selection on failure i2c-eg20t: fix race between i2c init and interrupt enable 23 September 2016, 23:44:12 UTC
d0c1d15 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a fix up for the firmware handling to the Silead driver (which is a new driver in this release)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead_gsl1680 - use "silead/" prefix for firmware loading Input: silead_gsl1680 - document firmware-name, fix implementation 23 September 2016, 23:34:24 UTC
4ee6986 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Three fixes, two regressions and one that poses a problem in blk-mq with the new nvmef code" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx nvme-rdma: only clear queue flags after successful connect blk-throttle: Extend slice if throttle group is not empty 23 September 2016, 23:24:36 UTC
b22734a Merge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Josef fixed a problem when quotas are enabled with his latest ENOSPC rework, and Jeff added more checks into the subvol ioctls to avoid tripping up lookup_one_len" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: ensure that file descriptor used with subvol ioctls is a dir Btrfs: handle quota reserve failure properly 23 September 2016, 20:39:37 UTC
78bbf15 Merge tag 'regmap-fix-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A fix for an issue with double locking that was introduced earlier this release. I'd missed in review that we were already in a locked region when trying to drop part of the cache" * tag 'regmap-fix-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix deadlock on _regmap_raw_write() error path 23 September 2016, 18:50:49 UTC
2ddfdd4 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a regression in RSA that was only half-fixed earlier in the cycle. It also fixes an older regression that breaks the keyring subsystem" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa-pkcs1pad - Handle leading zero for decryption KEYS: Fix skcipher IV clobbering 23 September 2016, 18:28:04 UTC
7d188ba Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "A couple of last-minute arm64 fixes for 4.8: - Fix secondary CPU to NUMA node assignment - Fix kgdb breakpoint insertion in read-only text sections (when CONFIG_DEBUG_RODATA or CONFIG_DEBUG_SET_MODULE_RONX are enabled)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. 23 September 2016, 18:24:42 UTC
d9d1ffe Merge tag 'tags/nand-fixes-for-4.8-rc8' of git://git.infradead.org/linux-ubifs Pull MTD fixes from Richard Weinberger: "NAND Fixes for 4.8-rc8. This contains fixes for bugs which got introduced in -rc1. Usually Brian takes NAND patches from Boris, but since Brian is very busy these days with other stuff and Boris is not yet member of the kernel.org web of trust I stepped in. Boris will be in Berlin at ELCE, I'll sign his key and hopefully other Kernel developers too such that he can issue his own pull requests soon. Summary: - Fix a wrong OOB layout definition in the mxc driver - Fix incorrect ECC handling in the mtk driver" * tag 'tags/nand-fixes-for-4.8-rc8' of git://git.infradead.org/linux-ubifs: mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions mtd: nand: fix chances to create incomplete ECC data when writing mtd: nand: fix generating over-boundary ECC data when writing 23 September 2016, 18:15:00 UTC
e7c5412 Merge tag 'mmc-v4.8-rc7' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC fix from Ulf Hansson: "MMC host: - dw_mmc: fix the spamming log message" * tag 'mmc-v4.8-rc7' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: dw_mmc: fix the spamming log message 23 September 2016, 18:10:53 UTC
e47f2e5 Merge tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs Pull configfs fix from Christoph Hellwig: "One more trivial fix for the binary attribute code from Phil Turnbull" * tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs: configfs: Return -EFBIG from configfs_write_bin_file. 23 September 2016, 16:45:15 UTC
c8712c6 blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx This provides the caller a feedback that a given hctx is not mapped and thus no command can be sent on it. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jens Axboe <axboe@fb.com> 23 September 2016, 16:25:48 UTC
7e95630 MIPS: Fix pre-r6 emulation FPU initialisation In the mipsr2_decoder() function, used to emulate pre-MIPSr6 instructions that were removed in MIPSr6, the init_fpu() function is called if a removed pre-MIPSr6 floating point instruction is the first floating point instruction used by the task. However, init_fpu() performs varous actions that rely upon not being migrated. For example in the most basic case it sets the coprocessor 0 Status.CU1 bit to enable the FPU & then loads FP register context into the FPU registers. If the task were to migrate during this time, it may end up attempting to load FP register context on a different CPU where it hasn't set the CU1 bit, leading to errors such as: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 Fix this by disabling preemption around the call to init_fpu(), ensuring that it starts & completes on one CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: https://patchwork.linux-mips.org/patch/14305/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 September 2016, 16:21:38 UTC
67787b6 arm64: kgdb: handle read-only text / modules Handle read-only cases when CONFIG_DEBUG_RODATA (4.0) or CONFIG_DEBUG_SET_MODULE_RONX (3.18) are enabled by using aarch64_insn_write() instead of probe_kernel_write() as introduced by commit 2f896d586610 ("arm64: use fixmap for text patching") in 4.0. Fixes: 11d91a770f1f ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 23 September 2016, 10:25:01 UTC
c18df0a arm64: Call numa_store_cpu_info() earlier. The wq_numa_init() function makes a private CPU to node map by calling cpu_to_node() early in the boot process, before the non-boot CPUs are brought online. Since the default implementation of cpu_to_node() returns zero for CPUs that have never been brought online, the workqueue system's view is that *all* CPUs are on node zero. When the unbound workqueue for a non-zero node is created, the tsk_cpus_allowed() for the worker threads is the empty set because there are, in the view of the workqueue system, no CPUs on non-zero nodes. The code in try_to_wake_up() using this empty cpumask ends up using the cpumask empty set value of NR_CPUS as an index into the per-CPU area pointer array, and gets garbage as it is one past the end of the array. This results in: [ 0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4 [ 1.970095] pgd = fffffc00094b0000 [ 1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000 [ 1.982610] Internal error: Oops: 96000004 [#1] SMP [ 1.987541] Modules linked in: [ 1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G W 4.8.0-rc6-preempt-vol+ #9 [ 1.999435] Hardware name: Cavium ThunderX CN88XX board (DT) [ 2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000 [ 2.011158] PC is at try_to_wake_up+0x194/0x34c [ 2.015737] LR is at try_to_wake_up+0x150/0x34c [ 2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5 [ 2.027803] sp : fffffe0fe8b8fb10 [ 2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000 [ 2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000 [ 2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200 [ 2.047270] x23: 00000000000000c0 x22: 0000000000000004 [ 2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000 [ 2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000 [ 2.063386] x17: 0000000000000000 x16: 0000000000000000 [ 2.068760] x15: 0000000000000018 x14: 0000000000000000 [ 2.074133] x13: 0000000000000000 x12: 0000000000000000 [ 2.079505] x11: 0000000000000000 x10: 0000000000000000 [ 2.084879] x9 : 0000000000000000 x8 : 0000000000000000 [ 2.090251] x7 : 0000000000000040 x6 : 0000000000000000 [ 2.095621] x5 : ffffffffffffffff x4 : 0000000000000000 [ 2.100991] x3 : 0000000000000000 x2 : 0000000000000000 [ 2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80 [ 2.111737] [ 2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020) [ 2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000) [ 2.125914] fb00: fffffe0fe8b8fb80 fffffc00080e7648 . . . [ 2.442859] Call trace: [ 2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70) [ 2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468 [ 2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64 [ 2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000 [ 2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000 [ 2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4 [ 2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000 [ 2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040 [ 2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018 [ 2.523156] fa60: 0000000000000000 0000000000000000 [ 2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c [ 2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34 [ 2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c [ 2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0 [ 2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4 [ 2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c [ 2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168 [ 2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4 [ 2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148 [ 2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8 [ 2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0 [ 2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50 [ 2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821) [ 2.603464] ---[ end trace 58c0cd36b88802bc ]--- [ 2.608138] Kernel panic - not syncing: Fatal exception Fix by moving call to numa_store_cpu_info() for all CPUs into smp_prepare_cpus(), which happens before wq_numa_init(). Since smp_store_cpu_info() now contains only a single function call, simplify by removing the function and out-lining its contents. Suggested-by: Robert Richter <rric@kernel.org> Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.") Cc: <stable@vger.kernel.org> # 4.7.x- Signed-off-by: David Daney <david.daney@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Tested-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 23 September 2016, 09:50:33 UTC
96b03ab locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text Fix the indefinitiley -> indefinitely typo in Kconfig.debug. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160922205513.17821-1-vivien.didelot@savoirfairelinux.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 23 September 2016, 05:30:04 UTC
3b4ac78 nvme-rdma: only clear queue flags after successful connect Otherwise, nvme_rdma_stop_and_clear_queue() will incorrectly try to stop/free rdma qps/cm_ids that are already freed. Fixes: e89ca58f9c90 ("nvme-rdma: add DELETING queue flag") Reported-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> 23 September 2016, 01:58:17 UTC
331dcf4 i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended If the i2c device is already runtime suspended, if qup_i2c_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the following splat: WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90 Modules linked in: CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) PC is at clk_core_unprepare+0x80/0x90 LR is at clk_unprepare+0x28/0x40 pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145 Call trace: clk_core_unprepare+0x80/0x90 qup_i2c_disable_clocks+0x2c/0x68 qup_i2c_suspend+0x10/0x20 platform_pm_suspend+0x24/0x68 ... This patch fixes the issue by executing qup_i2c_pm_suspend_runtime conditionally in qup_i2c_suspend. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 22 September 2016, 18:11:14 UTC
b1f2beb Merge tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - several fixes for new drivers added for Kernel 4.8 addition (cec core, pulse8 cec driver and Mediatek vcodec) - a regression fix for cx23885 and saa7134 drivers - an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on success * tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits) [media] cx23885/saa7134: assign q->dev to the PCI device [media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success [media] cec: fix ioctl return code when not registered [media] cec: don't Feature Abort broadcast msgs when unregistered [media] vcodec:mediatek: Refine VP8 encoder driver [media] vcodec:mediatek: Refine H264 encoder driver [media] vcodec:mediatek: change H264 profile default to profile high [media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder [media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out [media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder [media] vcodec:mediatek:code refine for v4l2 Encoder driver [media] cec-funcs.h: add missing vendor-specific messages [media] cec-edid: check for IEEE identifier [media] pulse8-cec: fix error handling [media] pulse8-cec: set correct Signal Free Time [media] mtk-vcodec: add HAS_DMA dependency [media] cec: ignore messages when log_addr_mask == 0 [media] cec: add item to TODO [media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID [media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag ... 22 September 2016, 16:04:49 UTC
f887c21 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Mostly small bits scattered all over the place, which is usually how things go this late in the -rc series. 1) Proper driver init device resets in bnx2, from Baoquan He. 2) Fix accounting overflow in __tcp_retransmit_skb(), sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet. 3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera. 4) Missing check of skb_linearize() return value in mac80211, from Johannes Berg. 5) Endianness fix in nf_table_trace dumps, from Liping Zhang. 6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner. 7) Update DSA and b44 MAINTAINERS entries. 8) Make input path of vti6 driver work again, from Nicolas Dichtel. 9) Off-by-one in mlx4, from Sebastian Ott. 10) Fix fallback route lookup handling in ipv6, from Vincent Bernat. 11) Fix stack corruption on probe in qed driver, from Yuval Mintz. 12) PHY init fixes in r8152 from Hayes Wang. 13) Missing SKB free in irda_accept error path, from Phil Turnbull" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tcp: properly account Fast Open SYN-ACK retrans tcp: fix under-accounting retransmit SNMP counters MAINTAINERS: Update b44 maintainer. net: get rid of an signed integer overflow in ip_idents_reserve() net/mlx4_core: Fix to clean devlink resources net: can: ifi: Configure transmitter delay vti6: fix input path ipmr, ip6mr: return lastuse relative to now r8152: disable ALDPS and EEE before setting PHY r8152: remove r8153_enable_eee r8152: move PHY settings to hw_phy_cfg r8152: move enabling PHY r8152: move some functions cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter qed: Fix stack corruption on probe MAINTAINERS: Add an entry for the core network DSA code net: ipv6: fallback to full lookup if table lookup is unsuitable net/mlx5: E-Switch, Handle mode change failures net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code net/mlx5: Fix flow counter bulk command out mailbox allocation ... 22 September 2016, 15:49:25 UTC
3bf6215 perf/core: Limit matching exclusive events to one PMU An "exclusive" PMU is the one that can only have one event scheduled in at any given time. There may be more than one of such PMUs in a system, though, like Intel PT and BTS. It should be allowed to have one event for either of those inside the same context (there may be other constraints that may prevent this, but those would be hardware-specific). However, the exclusivity code is written so that only one event from any of the "exclusive" PMUs is allowed in a context. Fix this by making the exclusive event filter explicitly match two events' PMUs. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160920154811.3255-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 22 September 2016, 12:56:09 UTC
08b90f0 perf/x86/intel/bts: Make it an exclusive PMU Just like intel_pt, intel_bts can only handle one event at a time, which is the reason we introduced PERF_PMU_CAP_EXCLUSIVE in the first place. However, at the moment one can have as many intel_bts events within the same context at the same time as one pleases. Only one of them, however, will get scheduled and receive the actual trace data. Fix this by making intel_bts an "exclusive" PMU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160920154811.3255-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 22 September 2016, 12:56:08 UTC
9bf6ffd locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP() We cannot use the "z" constraint twice, since its a single register (r0). Change the one not used by movli.l/movco.l to "r". Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Ingo Molnar <mingo@kernel.org> 22 September 2016, 12:47:02 UTC
f0aa1ce regmap: fix deadlock on _regmap_raw_write() error path Commit 815806e39bf6 ("regmap: drop cache if the bus transfer error") added a call to regcache_drop_region() to error path in _regmap_raw_write(). However that path runs with regmap lock taken, and regcache_drop_region() tries to re-take it, causing a deadlock. Fix that by calling map->cache_ops->drop() directly. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org> 22 September 2016, 10:24:22 UTC
0cf43f5 crypto: rsa-pkcs1pad - Handle leading zero for decryption As the software RSA implementation now produces fixed-length output, we need to eliminate leading zeros in the calling code instead. This patch does just that for pkcs1pad decryption while signature verification was fixed in an earlier patch. Fixes: 9b45b7bba3d2 ("crypto: rsa - Generate fixed-length output") Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 22 September 2016, 09:42:08 UTC
456bee9 KEYS: Fix skcipher IV clobbering The IV must not be modified by the skcipher operation so we need to duplicate it. Fixes: c3917fd9dfbc ("KEYS: Use skcipher") Cc: stable@vger.kernel.org Reported-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 22 September 2016, 09:42:07 UTC
005d675 mmc: dw_mmc: fix the spamming log message When there is no Card which is set to "broken-cd", it's displayed a clock information continuously. Because it's polling for detecting card. This patch is fixed this problem. Fixes: 65257a0deed5 ("mmc: dw_mmc: remove UBSAN warning in dw_mci_setup_bus()") Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 22 September 2016, 07:34:13 UTC
7e32b44 tcp: properly account Fast Open SYN-ACK retrans Since the TFO socket is accepted right off SYN-data, the socket owner can call getsockopt(TCP_INFO) to collect ongoing SYN-ACK retransmission or timeout stats (i.e., tcpi_total_retrans, tcpi_retransmits). Currently those stats are only updated upon handshake completes. This patch fixes it. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 07:33:01 UTC
de1d657 tcp: fix under-accounting retransmit SNMP counters This patch fixes these under-accounting SNMP rtx stats LINUX_MIB_TCPFORWARDRETRANS LINUX_MIB_TCPFASTRETRANS LINUX_MIB_TCPSLOWSTARTRETRANS when retransmitting TSO packets Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 07:33:01 UTC
ba1ba25 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2016-09-21 1) Propagate errors on security context allocation. From Mathias Krause. 2) Fix inbound policy checks for inter address family tunnels. From Thomas Zeitlhofer. 3) Fix an old memory leak on aead algorithm usage. From Ilan Tayari. 4) A recent patch fixed a possible NULL pointer dereference but broke the vti6 input path. Fix from Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 06:56:23 UTC
290b774 Merge tag 'linux-can-fixes-for-4.8-20160921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-21 this is another pull request of one patch for the upcoming linux-4.8 release. Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring the transmitter delay. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 06:47:46 UTC
75c9510 MAINTAINERS: Update b44 maintainer. Taking over as maintainer since Gary Zambrano is no longer working for Broadcom. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 06:43:19 UTC
adb0311 net: get rid of an signed integer overflow in ip_idents_reserve() Jiri Pirko reported an UBSAN warning happening in ip_idents_reserve() [] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:11 [] signed integer overflow: [] -2117905507 + -695755206 cannot be represented in type 'int' Since we do not have uatomic_add_return() yet, use atomic_cmpxchg() so that the arithmetics can be done using unsigned int. Fixes: 04ca6973f7c1 ("ip: make IP identifiers less predictable") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 06:41:17 UTC
fba1296 net/mlx4_core: Fix to clean devlink resources This patch cleans devlink resources by calling devlink_port_unregister() to avoid the following issues: - Kernel panic when triggering reset flow. - Memory leak due to unfreed resources in mlx4_init_port_info(). Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 05:41:27 UTC
7932aa1 Merge tag 'wireless-drivers-for-davem-2016-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.8 iwlwifi * fix to prevent firmware crash when sending off-channel frames ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 September 2016, 01:45:19 UTC
325c50e btrfs: ensure that file descriptor used with subvol ioctls is a dir If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl) Cc: <stable@vger.kernel.org> #v2.6.29+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com> 22 September 2016, 00:22:16 UTC
1e5ec2e Btrfs: handle quota reserve failure properly btrfs/022 was spitting a warning for the case that we exceed the quota. If we fail to make our quota reservation we need to clean up our data space reservation. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Tested-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com> 22 September 2016, 00:22:16 UTC
463e8f8 i2c: mux: pca954x: retry updating the mux selection on failure The cached value of the last selected channel prevents retries on the next call, even on failure to update the selected channel. Fix that. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 21 September 2016, 21:10:21 UTC
371a015 i2c-eg20t: fix race between i2c init and interrupt enable the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by: Yadi.hu <yadi.hu@windriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 21 September 2016, 16:07:51 UTC
554af0c MIPS: vDSO: Fix Malta EVA mapping to vDSO page structs The page structures associated with the vDSO pages in the kernel image are calculated using virt_to_page(), which uses __pa() under the hood to find the pfn associated with the virtual address. The vDSO data pointers however point to kernel symbols, so __pa_symbol() should really be used instead. Since there is no equivalent to virt_to_page() which uses __pa_symbol(), fix init_vdso_image() to work directly with pfns, calculated with __phys_to_pfn(__pa_symbol(...)). This issue broke the Malta Enhanced Virtual Addressing (EVA) configuration which has a non-default implementation of __pa_symbol(). This is because it uses a physical alias so that the kernel executes from KSeg0 (VA 0x80000000 -> PA 0x00000000), while RAM is provided to the kernel in the KUSeg range (VA 0x00000000 -> PA 0x80000000) which uses the same underlying RAM. Since there are no page structures associated with the low physical address region, some arbitrary kernel memory would be interpreted as a page structure for the vDSO pages and badness ensues. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/14229/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 21 September 2016, 13:56:10 UTC
8d58790 net: can: ifi: Configure transmitter delay Configure the transmitter delay register at +0x1c to correctly handle the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample point) to a proper offset, so that the TDC mechanism works and won't generate error frames on the CAN link. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 21 September 2016, 08:32:24 UTC
63c4378 vti6: fix input path Since commit 1625f4529957, vti6 is broken, all input packets are dropped (LINUX_MIB_XFRMINNOSTATES is incremented). XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in xfrm6_rcv_spi(). A new function xfrm6_rcv_tnl() that enables to pass a value to xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function is used in several handlers). CC: Alexey Kodanev <alexey.kodanev@oracle.com> Fixes: 1625f4529957 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> 21 September 2016, 08:09:14 UTC
b5036cd ipmr, ip6mr: return lastuse relative to now When I introduced the lastuse member I made a subtle error because it was returned as an absolute value but that is meaningless to user-space as it doesn't allow to see how old exactly an entry is. Let's make it similar to how the bridge returns such values and make it relative to "now" (jiffies). This allows us to show the actual age of the entries and is much more useful (e.g. user-space daemons can age out entries, iproute2 can display the lastuse properly). Fixes: 43b9e1274060 ("net: ipmr/ip6mr: add support for keeping an entry age") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:58:23 UTC
493d5f6 Merge branch 'r8152-phy-fixes' Hayes Wang says: ==================== r8152: correct the flow of PHY First, to enable the PHY as early as possible. Some settings may fail if the PHY is power down. Move the other PHY settings to hw_phy_cfg() to make sure the order is correct. Finally, disable ALDPS and EEE before updating the PHY for RTL8153. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:53:53 UTC
d768c61 r8152: disable ALDPS and EEE before setting PHY Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:53:47 UTC
af0287e r8152: remove r8153_enable_eee Remove r8153_enable_eee(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:53:47 UTC
ef39df8 r8152: move PHY settings to hw_phy_cfg Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:53:47 UTC
2dd436d r8152: move enabling PHY Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:53:47 UTC
e644953 r8152: move some functions Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:53:46 UTC
9b86a8d cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 04:48:09 UTC
b79331a powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment Commit 5958d19a143e checks for prefetchable m64 BARs by comparing the addresses instead of using resource flags. This broke SR-IOV as the m64 check in pnv_pci_ioda_fixup_iov_resources() fails. The condition in pnv_pci_window_alignment() also changed to checking only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and IORESOURCE_PREFETCH. Revert these cases to the previous behaviour, adding a new helper function to do so. This is named pnv_pci_is_m64_flags() to make it clear this function is only looking at resource flags and should not be relied on for non-SRIOV resources. Fixes: 5958d19a143e ("Fix incorrect PE reservation attempt on some 64-bit BARs") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Russell Currey <ruscur@russell.cc> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 21 September 2016, 04:04:13 UTC
ceb16a9 Merge tag 'linux-can-fixes-for-4.8-20160919' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-19 this is a pull request of one patch for the upcoming linux-4.8 release. The patch by Fabio Estevam fixes the pm handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 21 September 2016, 02:46:14 UTC
7d1e042 Merge tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy hardening fix from Kees Cook: "Expand the arm64 vmalloc check to include skipping the module space too" * tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: usercopy: Check for module addresses 21 September 2016, 00:11:19 UTC
e23d415 fix fault_in_multipages_...() on architectures with no-op access_ok() Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 September 2016, 23:44:28 UTC
aa4f060 mm: usercopy: Check for module addresses While running a compile on arm64, I hit a memory exposure usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes) ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:75! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp llc ebtable_nat ip6table_security ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle iptable_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys CPU: 0 PID: 19744 Comm: updatedb Tainted: G W 4.8.0-rc3-threadinfo+ #1 Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016 task: fffffe03df944c00 task.stack: fffffe00d128c000 PC is at __check_object_size+0x70/0x3f0 LR is at __check_object_size+0x70/0x3f0 ... [<fffffc00082b4280>] __check_object_size+0x70/0x3f0 [<fffffc00082cdc30>] filldir64+0x158/0x1a0 [<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat] [<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat] [<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0 [<fffffc00082cde58>] SyS_getdents64+0x88/0x120 [<fffffc0008082c70>] el0_svc_naked+0x24/0x28 fffffc0000f3b1a8 is a module address. Modules may have compiled in strings which could get copied to userspace. In this instance, it looks like "." which matches with a size of 1 byte. Extend the is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover all possible cases. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> 20 September 2016, 23:07:39 UTC
e875bd6 irqchip/mips-gic: Fix local interrupts Since the device hierarchy domain was added by commit c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts have been broken. Users attempting to setup a per-cpu local IRQ, for example the GIC timer clock events code in drivers/clocksource/mips-gic-timer.c, the setup_percpu_irq function would refuse with -EINVAL because the GIC irqchip driver never called irq_set_percpu_devid so the IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because irq_set_percpu_devid was being called from the gic_irq_domain_map function which is no longer called. Doing only that runs into further problems because gic_dev_domain_alloc set the struct irq_chip for all interrupts, local or shared, to gic_level_irq_controller despite that only being suitable for shared interrupts. The typical outcome of this is that gic_level_irq_controller callback functions are called for local interrupts, and then hwirq number calculations overflow & the driver ends up attempting to access some invalid register with an address calculated from an invalid hwirq number. Best case scenario is that this then leads to a bus error. This is fixed by abstracting the setup of the hwirq & chip to a new function gic_setup_dev_chip which is used by both the root GIC IRQ domain & the device domain. Finally, decoding local interrupts failed because gic_dev_domain_alloc only called irq_domain_alloc_irqs_parent for shared interrupts. Local ones were therefore never associated with hwirqs in the root GIC IRQ domain and the virq in gic_handle_local_int would always be 0. This is fixed by calling irq_domain_alloc_irqs_parent unconditionally & having gic_irq_domain_alloc handle both local & shared interrupts, which is easy due to the aforementioned abstraction of chip setup into gic_setup_dev_chip. This fixes use of the MIPS GIC timer for clock events, which has been broken since c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") but hadn't been noticed due to a silent fallback to the MIPS coprocessor 0 count/compare clock events device. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Qais Yousef <qsyousef@gmail.com> Cc: stable@vger.kernel.org Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 20 September 2016, 21:20:02 UTC
df04abf fs/proc/kcore.c: Add bounce buffer for ktext data We hit hardened usercopy feature check for kernel text access by reading kcore file: usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes) kernel BUG at mm/usercopy.c:75! Bypassing this check for kcore by adding bounce buffer for ktext data. Reported-by: Steve Best <sbest@redhat.com> Fixes: f5509cc18daa ("mm: Hardened usercopy") Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 September 2016, 20:32:49 UTC
f5beeb1 fs/proc/kcore.c: Make bounce buffer global for read Next patch adds bounce buffer for ktext area, so it's convenient to have single bounce buffer for both vmalloc/module and ktext cases. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 September 2016, 20:32:49 UTC
7597cdc Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent Pull EFI fixes from Matt Fleming: * Fix a boot hang on large memory machines (multiple terabyte) caused by type conversion errors in the x86 PAT code (Matt Fleming) Signed-off-by: Ingo Molnar <mingo@kernel.org> 20 September 2016, 14:56:56 UTC
f1e1c9e perf/x86/intel/bts: Make sure debug store is valid Since commit 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection") my box goes boom on boot: | .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 | BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 | IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130 | Call Trace: | <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0 | [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40 This happens because the code introduced in this commit dereferences the debug store pointer unconditionally. The debug store is not guaranteed to be available, so a NULL pointer check as on other places is required. Fixes: 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: vince@deater.net Cc: eranian@google.com Link: http://lkml.kernel.org/r/20160920131220.xg5pbdjtznszuyzb@breakpoint.cc Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 20 September 2016, 14:06:09 UTC
1297667 x86/efi: Only map RAM into EFI page tables if in mixed-mode Waiman reported that booting with CONFIG_EFI_MIXED enabled on his multi-terabyte HP machine results in boot crashes, because the EFI region mapping functions loop forever while trying to map those regions describing RAM. While this patch doesn't fix the underlying hang, there's really no reason to map EFI_CONVENTIONAL_MEMORY regions into the EFI page tables when mixed-mode is not in use at runtime. Reported-by: Waiman Long <waiman.long@hpe.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> CC: Theodore Ts'o <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> 20 September 2016, 13:53:04 UTC
e535ec0 x86/mm/pat: Prevent hang during boot when mapping pages There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data types used for keeping track of how many pages have been mapped. This leads to hangs during boot when mapping large numbers of pages (multiple terabytes, as reported by Waiman) because those values are interpreted as being negative. commit 742563777e8d ("x86/mm/pat: Avoid truncation when converting cpa->numpages to address") fixed one of those bugs, but there is another lurking in __change_page_attr_set_clr(). Additionally, the return value type for the populate_*() functions can return negative values when a large number of pages have been mapped, triggering the error paths even though no error occurred. Consistently use 64-bit types on 64-bit platforms when counting pages. Even in the signed case this gives us room for regions 8PiB (pebibytes) in size whilst still allowing the usual negative value error checking idiom. Reported-by: Waiman Long <waiman.long@hpe.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> CC: Theodore Ts'o <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> 20 September 2016, 13:53:00 UTC
67a99b7 qed: Fix stack corruption on probe Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 08:57:16 UTC
3ed6e49 MAINTAINERS: Add an entry for the core network DSA code The core distributed switch architecture code currently does not have a MAINTAINERS entry, which results in some contributions not landing in the right peoples inbox. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 07:54:59 UTC
a435a07 net: ipv6: fallback to full lookup if table lookup is unsuitable Commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") introduced a regression: insertion of an IPv6 route in a table not containing the appropriate connected route for the gateway but which contained a non-connected route (like a default gateway) fails while it was previously working: $ ip link add eth0 type dummy $ ip link set up dev eth0 $ ip addr add 2001:db8::1/64 dev eth0 $ ip route add ::/0 via 2001:db8::5 dev eth0 table 20 $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20 RTNETLINK answers: No route to host $ ip -6 route show table 20 default via 2001:db8::5 dev eth0 metric 1024 pref medium After this patch, we get: $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20 $ ip -6 route show table 20 2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium default via 2001:db8::5 dev eth0 metric 1024 pref medium Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: Vincent Bernat <vincent@bernat.im> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 07:28:29 UTC
7675bb2 Merge branch 'mlx5-fixes' Or Gerlitz says: ==================== mlx5 fixes to 4.8-rc6 This series series has a fix from Roi to memory corruption bug in the bulk flow counters code and two late and hopefully last fixes from me to the new eswitch offloads code. Series done over net commit 37dd348 "bna: fix crash in bnad_get_strings()" ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 02:10:25 UTC
6c419ba net/mlx5: E-Switch, Handle mode change failures E-switch mode changes involve creating HW tables, potentially allocating netdevices, etc, and things can fail. Add an attempt to rollback to the existing mode when changing to the new mode fails. Only if rollback fails, getting proper SRIOV functionality requires module unload or sriov disablement/enablement. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 02:10:16 UTC
4eea37d net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code When enablement of the SRIOV e-switch in certain mode (switchdev or legacy) fails, we must set the mode to none. Otherwise, we'll run into double free based crashes when further attempting to deal with the e-switch (such as when disabling sriov or unloading the driver). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 02:10:15 UTC
babd613 net/mlx5: Fix flow counter bulk command out mailbox allocation The FW command output length should be only the length of struct mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy call which is invoked later in the driver to write over wrong memory address and corrupt kernel memory which results in random crashes. This bug was found using the kernel address sanitizer (kasan). Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 September 2016, 02:10:15 UTC
727653d irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls gic_compute_target_list() which advances the iterator by the number of CPUs in the cluster. If gic_compute_target_list() reaches the last CPU it leaves the iterator pointing at the last CPU. This means the next time round the for_each_cpu() loop cpumask_next() will be called with an invalid CPU. This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS: [ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000 [ 3.077943] CPU1: Booted secondary processor [410fd0f0] [ 3.078542] ------------[ cut here ]------------ [ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170 [ 3.078812] Modules linked in: [ 3.078869] [ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188 [ 3.078994] Hardware name: Foundation-v8A (DT) [ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000 [ 3.079145] PC is at gic_raise_softirq+0x12c/0x170 [ 3.079226] LR is at gic_raise_softirq+0xa4/0x170 [ 3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9 [ 3.081139] Call trace: [ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10) [ 3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170 [ 3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40 [ 3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88 [ 3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0 [ 3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8 [ 3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0 [ 3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370 [ 3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18 [ 3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0 [ 3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20 [ 3.083086] [<ffff000008103f80>] complete+0x40/0x60 [ 3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0 [ 3.083240] [<00000000808911a4>] 0x808911a4 [ 3.113401] Detected PIPT I-cache on CPU2 Avoid updating the iterator if the next call to cpumask_next() would cause the for_each_cpu() loop to exit. There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s eventual call to _find_next_bit() will return early as start >= nbits), this patch just silences the warning. Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 19 September 2016, 23:43:23 UTC
d2ffb01 Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rapidio/rio_cm: avoid GFP_KERNEL in atomic context Revert "ocfs2: bump up o2cb network protocol version" ocfs2: fix start offset to ocfs2_zero_range_for_truncate() cgroup: duplicate cgroup reference when cloning sockets mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting ocfs2: fix double unlock in case retry after free truncate log fanotify: fix list corruption in fanotify_get_response() fsnotify: add a way to stop queueing events on group shutdown ocfs2: fix trans extend while free cached blocks ocfs2: fix trans extend while flush truncate log ipc/shm: fix crash if CONFIG_SHMEM is not set mm: fix the page_swap_info() BUG_ON check autofs: use dentry flags to block walks during expire MAINTAINERS: update email for VLYNQ bus entry mm: avoid endless recursion in dump_page() mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin() khugepaged: fix use-after-free in collapse_huge_page() MAINTAINERS: Maik has moved ocfs2/dlm: fix race between convert and migration mem-hotplug: don't clear the only node in new_node_page() 19 September 2016, 23:08:03 UTC
b92ae13 rapidio/rio_cm: avoid GFP_KERNEL in atomic context As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737): riocm_send_close() is called from rio_cm_shutdown() under spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL allocation. Fix by taking riocm_send_close() outside of spinlock protected code. [akpm@linux-foundation.org: remove unneeded `if (!list_empty())'] Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
63b52c4 Revert "ocfs2: bump up o2cb network protocol version" This reverts commit 38b52efd218b ("ocfs2: bump up o2cb network protocol version"). This commit made rolling upgrade fail. When one node is upgraded to new version with this commit, the remaining nodes will fail to establish connections to it, then the application like VMs on the remaining nodes can't be live migrated to the upgraded one. This will cause an outage. Since negotiate hb timeout behavior didn't change without this commit, so revert it. Fixes: 38b52efd218bf ("ocfs2: bump up o2cb network protocol version") Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
d21c353 ocfs2: fix start offset to ocfs2_zero_range_for_truncate() If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reported-by: Saar Maoz <saar.maoz@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
d979a39 cgroup: duplicate cgroup reference when cloning sockets When a socket is cloned, the associated sock_cgroup_data is duplicated but not its reference on the cgroup. As a result, the cgroup reference count will underflow when both sockets are destroyed later on. Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Link: http://lkml.kernel.org/r/20160914194846.11153-2-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
db2ba40 mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting During cgroup2 rollout into production, we started encountering css refcount underflows and css access crashes in the memory controller. Splitting the heavily shared css reference counter into logical users narrowed the imbalance down to the cgroup2 socket memory accounting. The problem turns out to be the per-cpu charge cache. Cgroup1 had a separate socket counter, but the new cgroup2 socket accounting goes through the common charge path that uses a shared per-cpu cache for all memory that is being tracked. Those caches are safe against scheduling preemption, but not against interrupts - such as the newly added packet receive path. When cache draining is interrupted by network RX taking pages out of the cache, the resuming drain operation will put references of in-use pages, thus causing the imbalance. Disable IRQs during all per-cpu charge cache operations. Fixes: f7e1cb6ec51b ("mm: memcontrol: account socket memory in unified hierarchy memory controller") Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
3bb8b65 ocfs2: fix double unlock in case retry after free truncate log If ocfs2_reserve_cluster_bitmap_bits() fails with ENOSPC, it will try to free truncate log and then retry. Since ocfs2_try_to_free_truncate_log will lock/unlock global bitmap inode, we have to unlock it before calling this function. But when retry reserve and it fails with no global bitmap inode lock taken, it will unlock again in error handling branch and BUG. This issue also exists if no need retry and then ocfs2_inode_lock fails. So fix it. Fixes: 2070ad1aebff ("ocfs2: retry on ENOSPC if sufficient space in truncate log") Link: http://lkml.kernel.org/r/57D91939.6030809@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
96d4101 fanotify: fix list corruption in fanotify_get_response() fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d4442bd5 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
12703db fsnotify: add a way to stop queueing events on group shutdown Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d4442bd5 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
d5bf141 ocfs2: fix trans extend while free cached blocks The root cause of this issue is the same with the one fixed by the last patch, but this time credits for allocator inode and group descriptor may not be consumed before trans extend. The following error was caught: WARNING: CPU: 0 PID: 2037 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]() Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_netfront parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 2037 Comm: rm Tainted: G W 4.1.12-37.6.3.el6uek.bug24573128v2.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 Call Trace: dump_stack+0x48/0x5c warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 start_this_handle+0x4c3/0x510 [jbd2] jbd2__journal_restart+0x161/0x1b0 [jbd2] jbd2_journal_restart+0x13/0x20 [jbd2] ocfs2_extend_trans+0x74/0x220 [ocfs2] ocfs2_free_cached_blocks+0x16b/0x4e0 [ocfs2] ocfs2_run_deallocs+0x70/0x270 [ocfs2] ocfs2_commit_truncate+0x474/0x6f0 [ocfs2] ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2] ocfs2_wipe_inode+0x136/0x6a0 [ocfs2] ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2] ocfs2_evict_inode+0x28/0x60 [ocfs2] evict+0xab/0x1a0 iput_final+0xf6/0x190 iput+0xc8/0xe0 do_unlinkat+0x1b7/0x310 SyS_unlinkat+0x22/0x40 system_call_fastpath+0x12/0x71 ---[ end trace a62437cb060baa71 ]--- JBD2: rm wants too many credits (149 > 128) Link: http://lkml.kernel.org/r/1473674623-11810-2-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
2b0ad00 ocfs2: fix trans extend while flush truncate log Every time, ocfs2_extend_trans() included a credit for truncate log inode, but as that inode had been managed by jbd2 running transaction first time, it will not consume that credit until jbd2_journal_restart(). Since total credits to extend always included the un-consumed ones, there will be more and more un-consumed credit, at last jbd2_journal_restart() will fail due to credit number over the half of max transction credit. The following error was caught when unlinking a large file with many extents: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13626 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]() Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 13626 Comm: unlink Tainted: G W 4.1.12-37.6.3.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 Call Trace: dump_stack+0x48/0x5c warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 start_this_handle+0x4c3/0x510 [jbd2] jbd2__journal_restart+0x161/0x1b0 [jbd2] jbd2_journal_restart+0x13/0x20 [jbd2] ocfs2_extend_trans+0x74/0x220 [ocfs2] ocfs2_replay_truncate_records+0x93/0x360 [ocfs2] __ocfs2_flush_truncate_log+0x13e/0x3a0 [ocfs2] ocfs2_remove_btree_range+0x458/0x7f0 [ocfs2] ocfs2_commit_truncate+0x1b3/0x6f0 [ocfs2] ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2] ocfs2_wipe_inode+0x136/0x6a0 [ocfs2] ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2] ocfs2_evict_inode+0x28/0x60 [ocfs2] evict+0xab/0x1a0 iput_final+0xf6/0x190 iput+0xc8/0xe0 do_unlinkat+0x1b7/0x310 SyS_unlink+0x16/0x20 system_call_fastpath+0x12/0x71 ---[ end trace 28aa7410e69369cf ]--- JBD2: unlink wants too many credits (251 > 128) Link: http://lkml.kernel.org/r/1473674623-11810-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2016, 22:36:17 UTC
back to top