Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
d139371 Linus Torvalds 10 February 2019, 22:42:20 UTC Linux 5.0-rc6 10 February 2019, 22:42:20 UTC
68d94a8 Linus Torvalds 10 February 2019, 18:39:37 UTC Merge tag 'dmaengine-fix-5.0-rc6' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: - Fix in at_xdmac fr wrongful channel state - Fix for imx driver for wrong callback invocation - Fix to bcm driver for interrupt race & transaction abort. - Fix in dmatest to abort in mapping error * tag 'dmaengine-fix-5.0-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Abort test in case of mapping error dmaengine: bcm2835: Fix abort of transactions dmaengine: bcm2835: Fix interrupt race on RT dmaengine: imx-dma: fix wrong callback invoke dmaengine: at_xdmac: Fix wrongfull report of a channel as in use 10 February 2019, 18:39:37 UTC
aadaa80 Linus Torvalds 10 February 2019, 17:57:42 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A handful of fixes: - Fix an MCE corner case bug/crash found via MCE injection testing - Fix 5-level paging boot crash - Fix MCE recovery cache invalidation bug - Fix regression on Xen guests caused by a recent PMD level mremap speedup optimization" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Make set_pmd_at() paravirt aware x86/mm/cpa: Fix set_mce_nospec() x86/boot/compressed/64: Do not corrupt EDX on EFER.LME=1 setting x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out() 10 February 2019, 17:57:42 UTC
73a4c52 Linus Torvalds 10 February 2019, 17:54:19 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "irqchip driver fixes: most of them are race fixes for ARM GIC (General Interrupt Controller) variants, but also a fix for the ARM MMP (Marvell PXA168 et al) irqchip affecting OLPC keyboards" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix ITT_entry_size accessor irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable irqchip/gic-v3-its: Gracefully fail on LPI exhaustion irqchip/gic-v3-its: Plug allocation race for devices sharing a DevID irqchip/gic-v4: Fix occasional VLPI drop 10 February 2019, 17:54:19 UTC
212146f Linus Torvalds 10 February 2019, 17:48:18 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A couple of kernel side fixes: - Fix the Intel uncore driver on certain hardware configurations - Fix a CPU hotplug related memory allocation bug - Remove a spurious WARN() ... plus also a handful of perf tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf script python: Add Python3 support to tests/attr.py perf trace: Support multiple "vfs_getname" probes perf symbols: Filter out hidden symbols from labels perf symbols: Add fallback definitions for GELF_ST_VISIBILITY() tools headers uapi: Sync linux/in.h copy from the kernel sources perf clang: Do not use 'return std::move(something)' perf mem/c2c: Fix perf_mem_events to support powerpc perf tests evsel-tp-sched: Fix bitwise operator perf/core: Don't WARN() for impossible ring-buffer sizes perf/x86/intel: Delay memory deallocation until x86_pmu_dead_cpu() perf/x86/intel/uncore: Add Node ID mask 10 February 2019, 17:48:18 UTC
d2a6aae Linus Torvalds 10 February 2019, 17:44:52 UTC Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "An rtmutex (PI-futex) deadlock scenario fix, plus a locking documentation fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Handle early deadlock return correctly futex: Fix barrier comment 10 February 2019, 17:44:52 UTC
20e55bc Juergen Gross 10 February 2019, 07:40:56 UTC x86/mm: Make set_pmd_at() paravirt aware set_pmd_at() calls native_set_pmd() unconditionally on x86. This was fine as long as only huge page entries were written via set_pmd_at(), as Xen pv guests don't support those. Commit 2c91bd4a4e2e53 ("mm: speed up mremap by 20x on large regions") introduced a usage of set_pmd_at() possible on pv guests, leading to failures like: BUG: unable to handle kernel paging request at ffff888023e26778 #PF error: [PROT] [WRITE] RIP: e030:move_page_tables+0x7c1/0xae0 move_vma.isra.3+0xd1/0x2d0 __se_sys_mremap+0x3c6/0x5b0 do_syscall_64+0x49/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make set_pmd_at() paravirt aware by just letting it use set_pmd(). Fixes: 2c91bd4a4e2e53 ("mm: speed up mremap by 20x on large regions") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Cc: sstabellini@kernel.org Cc: hpa@zytor.com Cc: bp@alien8.de Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20190210074056.11842-1-jgross@suse.com 10 February 2019, 07:47:12 UTC
df3865f Linus Torvalds 09 February 2019, 21:43:12 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "One PM related driver bugfix and a MAINTAINERS update" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Update the ocores i2c bus driver maintainer, etc i2c: omap: Use noirq system sleep pm ops to idle device for suspend 09 February 2019, 21:43:12 UTC
e8b5060 Linus Torvalds 09 February 2019, 20:41:14 UTC Merge tag 'mips_fixes_5.0_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A batch of MIPS fixes for 5.0, nothing too scary. - A workaround for a Loongson 3 CPU bug is the biggest change, but still fairly straightforward. It adds extra memory barriers (sync instructions) around atomics to avoid a CPU bug that can break atomicity. - Loongson64 also sees a fix for powering off some systems which would incorrectly reboot rather than waiting for the power down sequence to complete. - We have DT fixes for the Ingenic JZ4740 SoC & the JZ4780-based Ci20 board, and a DT warning fix for the Nexsys4/MIPSfpga board. - The Cavium Octeon platform sees a further fix to the behaviour of the pcie_disable command line argument that was introduced in v3.3. - The VDSO, introduced in v4.4, sees build fixes for configurations of GCC that were built using the --with-fp-32= flag to specify a default 32-bit floating point ABI. - get_frame_info() sees a fix for configurations with CONFIG_KALLSYMS=n, for which it previously always returned an error. - If the MIPS Coherence Manager (CM) reports an error then we'll now clear that error correctly so that the GCR_ERROR_CAUSE register will be updated with information about any future errors" * tag 'mips_fixes_5.0_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: cm: reprime error cause mips: loongson64: remove unreachable(), fix loongson_poweroff(). MIPS: Remove function size check in get_frame_info() MIPS: Use lower case for addresses in nexys4ddr.dts MIPS: Loongson: Introduce and use loongson_llsc_mb() MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds MIPS: VDSO: Use same -m%-float cflag as the kernel proper MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled DTS: CI20: Fix bugs in ci20's device tree. MIPS: DTS: jz4740: Correct interrupt number of DMA core 09 February 2019, 20:41:14 UTC
e5a8a11 Linus Torvalds 09 February 2019, 18:26:09 UTC Merge tag 'for-linus-20190209' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, fixing namespace locking when dealing with the effects log, and a rapid add/remove issue (Keith) - blktrace tweak, ensuring requests with -1 sectors are shown (Jan) - link power management quirk for a Smasung SSD (Hans) - m68k nfblock dynamic major number fix (Chengguang) - series fixing blk-iolatency inflight counter issue (Liu) - ensure that we clear ->private when setting up the aio kiocb (Mike) - __find_get_block_slow() rate limit print (Tetsuo) * tag 'for-linus-20190209' of git://git.kernel.dk/linux-block: blk-mq: remove duplicated definition of blk_mq_freeze_queue Blk-iolatency: warn on negative inflight IO counter blk-iolatency: fix IO hang due to negative inflight counter blktrace: Show requests without sector fs: ratelimit __find_get_block_slow() failure message. m68k: set proper major_num when specifying module param major_num libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD nvme-pci: fix rapid add remove sequence nvme: lock NS list changes while handling command effects aio: initialize kiocb private in case any filesystems expect it. 09 February 2019, 18:26:09 UTC
5610789 Linus Torvalds 09 February 2019, 18:17:01 UTC Merge tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd Pull mtd fixes from Boris Brezillon: - Fix a problem with the imx28 ECC engine - Remove a debug trace introduced in 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") - Make sure partitions of size 0 can be registered - Fix kernel-doc warning in the rawnand core - Fix the error path of spinand_init() (missing manufacturer cleanup in a few places) - Address a problem with the SPI NAND PROGRAM LOAD operation which does not work as expected on some parts. * tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd: mtd: rawnand: gpmi: fix MX28 bus master lockup problem mtd: Make sure mtd->erasesize is valid even if the partition is of size 0 mtd: Remove a debug trace in mtdpart.c mtd: rawnand: fix kernel-doc warnings mtd: spinand: Fix the error/cleanup path in spinand_init() mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache 09 February 2019, 18:17:01 UTC
3e5e692 Linus Torvalds 09 February 2019, 17:44:08 UTC Merge tag 'for-linus-5.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two very minor fixes: one remove of a #include for an unused header and a fix of the xen ML address in MAINTAINERS" * tag 'for-linus-5.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: unify reference to xen-devel list arch/arm/xen: Remove duplicate header 09 February 2019, 17:44:08 UTC
3bb2600 Ingo Molnar 09 February 2019, 12:13:45 UTC Merge tag 'perf-urgent-for-mingo-5.0-20190205' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf trace: Arnaldo Carvalho de Melo: Fix handling of probe:vfs_getname when the probed routine is inlined in multiple places, fixing the collection of the 'filename' parameter in open syscalls. perf test: Gustavo A. R. Silva: Fix bitwise operator usage in evsel-tp-sched test, which made tat test always detect fields as signed. Jiri Olsa: Filter out hidden symbols from labels, added in systems where the annobin plugin is used, such as RHEL8, which, if left in place make the DWARF unwind 'perf test' to fail on PPC. Tony Jones: Fix 'perf_event_attr' tests when building with python3. perf mem/c2c: Ravi Bangoria: Fix perf_mem_events on PowerPC. tools headers UAPI: Arnaldo Carvalho de Melo: Sync linux/in.h copy from the kernel sources, silencing a perf build warning. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 09 February 2019, 12:13:45 UTC
46c291e Linus Torvalds 09 February 2019, 00:23:41 UTC Merge tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a bit larger than normal, as we had not managed to send out a pull request before traveling for a week without my signing key. There are multiple code fixes for older bugs, all of which should get backported into stable kernels: - tango: one fix for multiplatform configurations broken on other platforms when tango is enabled - arm_scmi: device unregistration fix - iop32x: fix kernel oops from extraneous __init annotation - pxa: remove a double kfree - fsl qbman: close an interrupt clearing race The rest is the usual collection of smaller fixes for device tree files, on the renesas, allwinner, meson, omap, davinci, qualcomm and imx platforms. Some of these are for compile-time warnings, most are for board specific functionality that fails to work because of incorrect settings" * tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: tango: Improve ARCH_MULTIPLATFORM compatibility firmware: arm_scmi: provide the mandatory device release callback ARM: iop32x/n2100: fix PCI IRQ mapping arm64: dts: add msm8996 compatible to gicv3 ARM: dts: am335x-shc.dts: fix wrong cd pin level ARM: dts: n900: fix mmc1 card detect gpio polarity ARM: dts: omap3-gta04: Fix graph_port warning ARM: pxa: ssp: unneeded to free devm_ allocated data ARM: dts: r8a7743: Convert to new LVDS DT bindings soc: fsl: qbman: avoid race in clearing QMan interrupt arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 ARM: dts: da850: fix interrupt numbers for clocksource dt-bindings: imx8mq: Number clocks consecutively arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: imx6sx: correct backward compatible of gpt ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ... 09 February 2019, 00:23:41 UTC
5bb513e Linus Torvalds 09 February 2019, 00:21:33 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Two arm64 fixes for -rc6. They resolve a kernel NULL dereference in kexec and bogus kernel page table dumping when userspace is configured for 52-bit virtual addressing. Summary: - Fix kernel oops when attemping kexec_file() with a NULL cmdline - Fix page table output in debugfs when ARM64_USER_VA_BITS_52=y" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: handle empty command-line arm64: ptdump: Don't iterate kernel page tables using PTRS_PER_PXX 09 February 2019, 00:21:33 UTC
820828b Linus Torvalds 09 February 2019, 00:04:12 UTC Merge tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Just two fixes, both going to stable. - Our support for split pmd page table lock had a bug which could lead to a crash on mremap() when using the Radix MMU (Power9 only). - A fix for the PAPR SCM driver (nvdimm) we added last release, which had a bug where we might mis-handle a hypervisor response leading to us failing to attach the memory region. Thanks to: Aneesh Kumar K.V, Oliver O'Halloran" * tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Use the correct bind address powerpc/radix: Fix kernel crash with mremap() 09 February 2019, 00:04:12 UTC
6b2912c Linus Torvalds 08 February 2019, 23:39:28 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal fixes from Eric Biederman: "This contains four small fixes for signal handling. A missing range check, a regression fix, prioritizing signals we have already started a signal group exit for, and better detection of synchronous signals. The confused decision of which signals to handle failed spectacularly when a timer was pointed at SIGBUS and the stack overflowed. Resulting in an unkillable process in an infinite loop instead of a SIGSEGV and core dump" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Better detection of synchronous signals signal: Always notice exiting tasks signal: Always attempt to allocate siginfo for SIGSTOP signal: Make siginmask safe when passed a signal of 0 08 February 2019, 23:39:28 UTC
3b6e820 Linus Torvalds 08 February 2019, 23:37:17 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of five minor fixes (although, tecnhincally, the aicxxx fix is for a major problem in that the driver won't load without it, but I think the fact it's taken us since 4.10 to discover this indicates that the user base for these things has declined)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxlflash: Prevent deadlock when adapter probe fails Revert "scsi: libfc: Add WARN_ON() when deleting rports" scsi: sd_zbc: Fix zone information messages scsi: target: make the pi_prot_format ConfigFS path readable scsi: aic94xx: fix module loading 08 February 2019, 23:37:17 UTC
2e277fa Linus Torvalds 08 February 2019, 23:34:10 UTC Merge tag 'iommu-fixes-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Intel decided to leave the newly added Scalable Mode Feature default-disabled for now. The patch here accomplishes that" * tag 'iommu-fixes-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Leave scalable mode default off 08 February 2019, 23:34:10 UTC
70be9ac Linus Torvalds 08 February 2019, 23:32:10 UTC Merge tag 'pci-v5.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) that breaks PCIe on I.MX SoCs (Thinh Nguyen)" * tag 'pci-v5.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) 08 February 2019, 23:32:10 UTC
e2dac60 Linus Torvalds 08 February 2019, 23:30:02 UTC Merge tag 'acpi-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This prevents excessive ACPI debug messages from being printed to the kernel log, which has started to happen after one of the recent ACPICA commits (Erik Schmauss)" * tag 'acpi-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Set debug output flags independent of ACPICA 08 February 2019, 23:30:02 UTC
13c80dd Andrew Lunn 08 February 2019, 16:56:31 UTC MAINTAINERS: Update the ocores i2c bus driver maintainer, etc The listed maintainer has not been responding to emails for a while. Add myself as a second maintainer. Add the platform data include file, which was not listed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 08 February 2019, 21:15:24 UTC
2698484 Liu Bo 25 January 2019, 00:12:49 UTC blk-mq: remove duplicated definition of blk_mq_freeze_queue As the prototype has been defined in "include/linux/blk-mq.h", the one in "block/blk-mq.h" can be removed then. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 February 2019, 19:42:29 UTC
391f552 Liu Bo 25 January 2019, 00:12:48 UTC Blk-iolatency: warn on negative inflight IO counter This is to catch any unexpected negative value of inflight IO counter. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 February 2019, 19:42:27 UTC
8c772a9 Liu Bo 25 January 2019, 00:12:47 UTC blk-iolatency: fix IO hang due to negative inflight counter Our test reported the following stack, and vmcore showed that ->inflight counter is -1. [ffffc9003fcc38d0] __schedule at ffffffff8173d95d [ffffc9003fcc3958] schedule at ffffffff8173de26 [ffffc9003fcc3970] io_schedule at ffffffff810bb6b6 [ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb [ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3 [ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a [ffffc9003fcc3b08] generic_make_request at ffffffff81368b49 [ffffc9003fcc3b68] submit_bio at ffffffff81368d7d [ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4] [ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4] [ffffc9003fcc3d68] do_writepages at ffffffff811c49ae [ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188 [ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301 [ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4] [ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b [ffffc9003fcc3ee8] do_fsync at ffffffff81285abd [ffffc9003fcc3f18] sys_fsync at ffffffff81285d50 [ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04 [ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e The ->inflight counter may be negative (-1) if 1) blk-iolatency was disabled when the IO was issued, 2) blk-iolatency was enabled before this IO reached its endio, 3) the ->inflight counter is decreased from 0 to -1 in endio() In fact the hang can be easily reproduced by the below script, H=/sys/fs/cgroup/unified/ P=/sys/fs/cgroup/unified/test echo "+io" > $H/cgroup.subtree_control mkdir -p $P echo $$ > $P/cgroup.procs xfs_io -f -d -c "pwrite 0 4k" /dev/sdg echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency xfs_io -f -d -c "pwrite 0 4k" /dev/sdg This fixes the problem by freezing the queue so that while enabling/disabling iolatency, there is no inflight rq running. Note that quiesce_queue is not needed as this only updating iolatency configuration about which dispatching request_queue doesn't care. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 February 2019, 19:42:26 UTC
27b4ad6 Linus Torvalds 08 February 2019, 19:21:54 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ... 08 February 2019, 19:21:54 UTC
6809054 Linus Torvalds 08 February 2019, 18:56:31 UTC Merge tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small char and misc driver fixes for 5.0-rc6. Nothing huge here, some more binderfs fixups found as people use it, and there is a "large" selftest added to validate the binderfs code, which makes up the majority of this pull request. There's also some small mei and mic fixes to resolve some reported issues. All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mic: vop: Fix crash on remove mic: vop: Fix use-after-free on remove binderfs: remove separate device_initcall() fpga: stratix10-soc: fix wrong of_node_put() in init function mic: vop: Fix broken virtqueues mei: free read cb on ctrl_wr list flush samples: mei: use /dev/mei0 instead of /dev/mei mei: me: add ice lake point device id. binderfs: respect limit on binder control creation binder: fix CONFIG_ANDROID_BINDER_DEVICES selftests: add binderfs selftests 08 February 2019, 18:56:31 UTC
8c8e62c Linus Torvalds 08 February 2019, 18:53:44 UTC Merge tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core fixes for 5.0-rc6. Well, not so much "driver core" as "debugfs". There's a lot of outstanding debugfs cleanup patches coming in through different subsystem trees, and in that process the debugfs core was found that it really should return errors when something bad happens, to prevent random files from showing up in the root of debugfs afterward. So debugfs was fixed up to handle this properly, and then two fixes for the relay and blk-mq code was needed as it was making invalid assumptions about debugfs return values. There's also a cacheinfo fix in here that resolves a tiny issue. All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: blk-mq: protect debugfs_create_files() from failures relay: check return of create_buf_file() properly debugfs: debugfs_lookup() should return NULL if not found debugfs: return error values, not NULL debugfs: fix debugfs_rename parameter checking cacheinfo: Keep the old value if of_property_read_u32 fails 08 February 2019, 18:53:44 UTC
e464f50 Linus Torvalds 08 February 2019, 18:51:59 UTC Merge tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are some small iio and staging driver fixes for 5.0-rc6. Nothing big, just resolve some reported IIO driver issues, and one staging driver bug. One staging driver patch was added and then reverted as well. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()" staging: erofs: keep corrupted fs from crashing kernel in erofs_namei() staging: octeon: fix broken phylib usage iio: ti-ads8688: Update buffer allocation for timestamps tools: iio: iio_generic_buffer: make num_loops signed iio: adc: axp288: Fix TS-pin handling iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius 08 February 2019, 18:51:59 UTC
e22a15d Linus Torvalds 08 February 2019, 18:49:55 UTC Merge tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial fixes for 5.0-rc6. Nothing huge, just a few small fixes for reported issues. The speakup fix is in here as it is a tty operation issue. All of these have been in linux-next for a while with no reported problems" * tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: fix race between flush_to_ldisc and tty_open staging: speakup: fix tty-operation NULL derefs serial: sh-sci: Do not free irqs that have already been freed serial: 8250_pci: Make PCI class test non fatal tty: serial: 8250_mtk: Fix potential NULL pointer dereference 08 February 2019, 18:49:55 UTC
00a159a Linus Torvalds 08 February 2019, 18:48:26 UTC Merge tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Grek KH: "Here are some small USB fixes for 5.0-rc6. Nothing huge, the normal amount of USB gadget fixes as well as some USB phy fixes. There's also a typec fix as well. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Correct the PPS out_volt calculation usb: gadget: musb: fix short isoc packets with inventra dma usb: phy: am335x: fix race condition in _probe usb: dwc3: exynos: Fix error handling of clk_prepare_enable usb: phy: fix link errors usb: gadget: udc: net2272: Fix bitwise and boolean operations usb: dwc3: gadget: Handle 0 xfer length for OUT EP 08 February 2019, 18:48:26 UTC
bd5ff86 Linus Torvalds 08 February 2019, 18:46:14 UTC Merge tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: "Here are a handful of XFS fixes to fix a data corruption problem, a crasher bug, and a deadlock. Summary: - Fix cache coherency problem with writeback mappings - Fix buffer deadlock when shutting fs down - Fix a null pointer dereference when running online repair" * tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: set buffer ops when repair probes for btree type xfs: end sync buffer I/O properly on shutdown error xfs: eof trim writeback mapping as soon as it is cached 08 February 2019, 18:46:14 UTC
adcbc92 Linus Torvalds 08 February 2019, 18:43:15 UTC Merge tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Missed fixes last week as had nothing until amdgpu showed up on Saturday. Other stuff has since rolled in along with some more amdgpu fixes, so we have two weeks of those, and some i915, vmwgfx, sun4i, rockchip and omap fixes. amdgpu/radeon: - fix crash on passthrough for SI - fencing fix for shared buffers - APU hwmon fix - API powerplay fix - eDP freesync fix - PASID mgr locking fix - KFD warning fix - DC/powerplay fix - raven revision ids fix - vega20 doorbell fix i915: - SNB display fix - SKL srckey mask fix - ICL DDI clock selection fix vmwgfx: - DMA API fix - IOMMU detection fix - display fixes sun4i: - tcon clock fix rockchip: - SPDX identifier fix omap: - DSI fixes" * tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm: (28 commits) drm/omap: dsi: Hack-fix DSI bus flags drm/omap: dsi: Fix OF platform depopulate drm/omap: dsi: Fix crash in DSI debug dumps drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen drm/amd/display: Attach VRR properties for eDP connectors drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr drm/i915: always return something on DDI clock selection drm/i915: Fix skl srckey mask bits drm/vmwgfx: Improve on IOMMU detection drm/vmwgfx: Fix setting of dma masks drm/vmwgfx: Also check for crtc status while checking for DU active drm/vmwgfx: Fix an uninitialized fence handle value drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init drm/amdgpu: fix the incorrect external id for raven series drm/amdgpu: Implement doorbell self-ring for NBIO 7.4 drm/amd/display: Fix fclk idle state drm/amdgpu: Transfer fences to dmabuf importer drm/amd/powerplay: Fix missing break in switch ... 08 February 2019, 18:43:15 UTC
9ab7d22 Lukas Bulwahn 12 January 2019, 09:07:23 UTC MAINTAINERS: unify reference to xen-devel list In the linux kernel MAINTAINERS file, largely "xen-devel@lists.xenproject.org (moderated for non-subscribers)" is used to refer to the xen-devel mailing list. The DRM DRIVERS FOR XEN section entry mentions xen-devel@lists.xen.org instead, but that is just the same mailing list as the mailing list above. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> 08 February 2019, 16:18:00 UTC
0521e8b Peter Zijlstra 08 February 2019, 12:08:59 UTC x86/mm/cpa: Fix set_mce_nospec() The recent commit fe0937b24ff5 ("x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function") accidentally made the call to make_addr_canonical_again() go away, which breaks set_mce_nospec(). Re-instate the call to convert the address back into canonical form right before invoking either CLFLUSH or INVLPG. Rename the function while at it to be shorter (and less MAGA). Fixes: fe0937b24ff5 ("x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function") Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Rik van Riel <riel@surriel.com> Link: https://lkml.kernel.org/r/20190208120859.GH32511@hirez.programming.kicks-ass.net 08 February 2019, 13:31:56 UTC
1a1fb98 Thomas Gleixner 29 January 2019, 22:15:12 UTC futex: Handle early deadlock return correctly commit 56222b212e8e ("futex: Drop hb->lock before enqueueing on the rtmutex") changed the locking rules in the futex code so that the hash bucket lock is not longer held while the waiter is enqueued into the rtmutex wait list. This made the lock and the unlock path symmetric, but unfortunately the possible early exit from __rt_mutex_proxy_start() due to a detected deadlock was not updated accordingly. That allows a concurrent unlocker to observe inconsitent state which triggers the warning in the unlock path. futex_lock_pi() futex_unlock_pi() lock(hb->lock) queue(hb_waiter) lock(hb->lock) lock(rtmutex->wait_lock) unlock(hb->lock) // acquired hb->lock hb_waiter = futex_top_waiter() lock(rtmutex->wait_lock) __rt_mutex_proxy_start() ---> fail remove(rtmutex_waiter); ---> returns -EDEADLOCK unlock(rtmutex->wait_lock) // acquired wait_lock wake_futex_pi() rt_mutex_next_owner() --> returns NULL --> WARN lock(hb->lock) unqueue(hb_waiter) The problem is caused by the remove(rtmutex_waiter) in the failure case of __rt_mutex_proxy_start() as this lets the unlocker observe a waiter in the hash bucket but no waiter on the rtmutex, i.e. inconsistent state. The original commit handles this correctly for the other early return cases (timeout, signal) by delaying the removal of the rtmutex waiter until the returning task reacquired the hash bucket lock. Treat the failure case of __rt_mutex_proxy_start() in the same way and let the existing cleanup code handle the eventual handover of the rtmutex gracefully. The regular rt_mutex_proxy_start() gains the rtmutex waiter removal for the failure case, so that the other callsites are still operating correctly. Add proper comments to the code so all these details are fully documented. Thanks to Peter for helping with the analysis and writing the really valuable code comments. Fixes: 56222b212e8e ("futex: Drop hb->lock before enqueueing on the rtmutex") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Stefan Liebler <stli@linux.ibm.com> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1901292311410.1950@nanos.tec.linutronix.de 08 February 2019, 12:00:36 UTC
6f568eb Davidlohr Bueso 06 February 2019, 18:56:02 UTC futex: Fix barrier comment The current comment for the barrier that guarantees that waiter increment is always before taking the hb spinlock (barrier (A)) needs to be fixed as it is misplaced. This is obviously referring to hb_waiters_inc, which is a full barrier. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190206185602.949-1-dave@stgolabs.net 08 February 2019, 12:00:35 UTC
39841cc Arun Parameswaran 08 February 2019, 00:01:18 UTC net: dsa: b53: Fix for failure when irq is not defined in dt Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a81b5 ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 February 2019, 02:18:37 UTC
dada163 Dave Airlie 08 February 2019, 00:32:47 UTC Merge tag 'drm-misc-fixes-2019-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.0-rc6: - Fixes to omap/dsi encoder. - Clock fix for sun4i. - Licensing header fix for rockchip. - Fix division by zero in the mode when trying to set a mode on i915 with GVT-g enabled. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com 08 February 2019, 00:32:49 UTC
151e3d6 Dave Airlie 08 February 2019, 00:30:29 UTC Merge tag 'drm-intel-fixes-2019-02-07-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.0-rc6: - SNB DPLL sanitize - ICL DDI clock selection - SLK srckey mask Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lg2s6nur.fsf@intel.com 08 February 2019, 00:30:57 UTC
74e9671 Linus Torvalds 07 February 2019, 22:54:45 UTC Merge tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixlet from Darren Hart: "Correct Documentation/ABI 4.21 KernelVersion to 5.0" * tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86: Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0 07 February 2019, 22:54:45 UTC
e303a06 Linus Torvalds 07 February 2019, 22:53:26 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Three security fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974) 07 February 2019, 22:53:26 UTC
ee6c073 Linus Torvalds 07 February 2019, 22:44:45 UTC Merge tag 'nfsd-5.0-1' of git://linux-nfs.org/~bfields/linux Pull nfsd fixes from Bruce Fields: "Two small nfsd bugfixes for 5.0, for an RDMA bug and a file clone bug" * tag 'nfsd-5.0-1' of git://linux-nfs.org/~bfields/linux: svcrdma: Remove max_sge check at connect time nfsd: Fix error return values for nfsd4_clone_file_range() 07 February 2019, 22:44:45 UTC
8b5cdbe Linus Torvalds 07 February 2019, 22:42:43 UTC Merge tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Both of these fixes address issues in changes merged for 5.0-rc4: - Fix DM core's missing memory barrier before waitqueue_active() calls. - Fix DM core's clone_bio() to work when cloning a subset of a bio with an integrity payload; bio_integrity_trim() wasn't getting called due to bio_trim()'s early return" * tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: don't use bio_trim() afterall dm: add memory barrier before waitqueue_active 07 February 2019, 22:42:43 UTC
8087f40 Thomas Gleixner 07 February 2019, 20:12:40 UTC Merge tag 'irqchip-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates from Marc Zyngier: - Another GICv3 ITS fix for devices sharing the same DevID - Don't return invalid data on exhaustion of the GICv3 LPI pool - Fix a GICv3 field decoding bug leading to memory over-allocation - Init GICv4 at boot time instead of lazy init - Fix interrupt masking on PJ4 07 February 2019, 20:12:40 UTC
0803de7 Jan Kara 07 February 2019, 10:55:39 UTC blktrace: Show requests without sector Currently, blktrace will not show requests that don't have any data as rq->__sector is initialized to -1 which is out of device range and thus discarded by act_log_check(). This is most notably the case for cache flush requests sent to the device. Fix the problem by making blk_rq_trace_sector() return 0 for requests without initialized sector. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 February 2019, 19:57:17 UTC
05dc600 Vladimir Kondratiev 06 February 2019, 11:46:17 UTC mips: cm: reprime error cause Accordingly to the documentation ---cut--- The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE fields can be cleared by either a reset or by writing the current value of GCR_ERROR_CAUSE.ERR_TYPE to the GCR_ERROR_CAUSE.ERR_TYPE register. ---cut--- Do exactly this. Original value of cm_error may be safely written back; it clears error cause and keeps other bits untouched. Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.3+ 07 February 2019, 19:55:24 UTC
8a96669 Yifeng Li 06 February 2019, 07:07:21 UTC mips: loongson64: remove unreachable(), fix loongson_poweroff(). On my Yeeloong 8089, I noticed the machine fails to shutdown properly, and often, the function mach_prepare_reboot() is unexpectedly executed, thus the machine reboots instead. A wait loop is needed to ensure the system is in a well-defined state before going down. In commit 997e93d4df16 ("MIPS: Hang more efficiently on halt/powerdown/restart"), a general superset of the wait loop for all platforms is already provided, so we don't need to implement our own. This commit simply removes the unreachable() compiler marco after mach_prepare_reboot(), thus allowing the execution of machine_hang(). My test shows that the machine is now able to shutdown successfully. Please note that there are two different bugs preventing the machine from shutting down, another work-in-progress commit is needed to fix a lockup in cpufreq / i8259 driver, please read Reference, this commit does not fix that bug. Reference: https://lkml.org/lkml/2019/2/5/908 Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # v4.17+ 07 February 2019, 19:50:14 UTC
ec7fd00 David S. Miller 07 February 2019, 18:48:42 UTC Merge branch 'ipv6-fixes' Hangbin Liu says: ==================== fix two kernel panics when disabled IPv6 on boot up When disabled IPv6 on boot up, since there is no ipv6 route tables, we should not call rt6_lookup. Fix them by checking if we have inet6_dev pointer on netdevice. v2: Fix idev reference leak, declarations and code mixing as Stefano, Eric pointed. Since we only want to check if idev exists and not reference it, use __in6_dev_get() insteand of in6_dev_get(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 18:48:42 UTC
173656a Hangbin Liu 07 February 2019, 10:36:11 UTC sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 18:48:42 UTC
c0a47e4 Hangbin Liu 07 February 2019, 10:36:10 UTC geneve: should not call rt6_lookup() when ipv6 was disabled When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: c40e89fd358e9 ("geneve: configure MTU based on a lower device") Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 18:48:42 UTC
ecec768 Peter Shier 11 October 2018, 18:46:46 UTC KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) Bugzilla: 1671904 There are multiple code paths where an hrtimer may have been started to emulate an L1 VMX preemption timer that can result in a call to free_nested without an intervening L2 exit where the hrtimer is normally cancelled. Unconditionally cancel in free_nested to cover all cases. Embargoed until Feb 7th 2019. Signed-off-by: Peter Shier <pshier@google.com> Reported-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Message-Id: <20181011184646.154065-1-pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 07 February 2019, 18:03:01 UTC
353c095 Paolo Bonzini 29 January 2019, 17:41:16 UTC KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) Bugzilla: 1671930 Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with memory operand, INVEPT, INVVPID) can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Embargoed until Feb 7th 2019. Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 07 February 2019, 18:02:56 UTC
cfa3938 Jann Horn 26 January 2019, 00:54:33 UTC kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974) kvm_ioctl_create_device() does the following: 1. creates a device that holds a reference to the VM object (with a borrowed reference, the VM's refcount has not been bumped yet) 2. initializes the device 3. transfers the reference to the device to the caller's file descriptor table 4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real reference The ownership transfer in step 3 must not happen before the reference to the VM becomes a proper, non-borrowed reference, which only happens in step 4. After step 3, an attacker can close the file descriptor and drop the borrowed reference, which can cause the refcount of the kvm object to drop to zero. This means that we need to grab a reference for the device before anon_inode_getfd(), otherwise the VM can disappear from under us. Fixes: 852b6d57dc7f ("kvm: add device control API") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 07 February 2019, 18:02:38 UTC
7146db3 Eric W. Biederman 06 February 2019, 23:51:47 UTC signal: Better detection of synchronous signals Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 07 February 2019, 15:00:36 UTC
35634ff Eric W. Biederman 07 February 2019, 00:39:40 UTC signal: Always notice exiting tasks Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 07 February 2019, 14:59:50 UTC
d47e3da Linus Torvalds 07 February 2019, 11:51:31 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fix from Jiri Kosina: "A fix for a bug in hid-debug that can lock up the kernel in infinite loop (CVE-2019-3819), from Vladis Dronov" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: debug: fix the ring buffer implementation 07 February 2019, 11:51:31 UTC
ce5cbf5 Erik Schmauss 06 February 2019, 00:14:00 UTC ACPI: Set debug output flags independent of ACPICA There was a divergence between Linux and ACPICA on the definition of ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's definition in 4c1379d7bb42. After resolving the divergence, it was clear that Linux users wanted to use their old set of debug flags. This change fixes the divergence by setting these debug flags during acpi_early_init() rather than during global variable initialization in acpixf.h (owned by ACPICA). Fixes: 4c1379d7bb42 ("ACPICA: Debug output: Add option to display method/object evaluation") Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com> Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 07 February 2019, 11:24:28 UTC
6f64e3a Linus Torvalds 07 February 2019, 08:33:56 UTC Merge tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of a few small fixes. The most significant one is the fix for the possible race at loading HD-audio drivers. This has been present for long time and surfaced only in a rare occasion, but finally spotted out" * tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132 - Fix build error without CONFIG_PCI ALSA: compress: Fix stop handling on compressed capture streams ALSA: usb-audio: Add support for new T+A USB DAC ALSA: hda - Serialize codec registrations ALSA: hda/realtek - Use a common helper for hp pin reference ALSA: hda/realtek - Fix lose hp_pins for disable auto mute ALSA: hda/realtek - Headset microphone support for System76 darp5 07 February 2019, 08:33:56 UTC
b031456 Linus Torvalds 07 February 2019, 08:05:28 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "A small fix for a uapi header, and a fix for VDPA for non-x86 guests" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: drop internal struct from UAPI virtio: support VIRTIO_F_ORDER_PLATFORM 07 February 2019, 08:05:28 UTC
4879f11 Linus Torvalds 07 February 2019, 07:59:01 UTC Merge tag 'trace-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This has two fixes for uprobe code. - Cut and paste fix to have uprobe printks say "uprobe" and not "kprobe" - Add terminating '\0' byte when copying function arguments" * tag 'trace-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/uprobes: Fix output for multiple string arguments tracing: uprobes: Fix typo in pr_fmt string 07 February 2019, 07:59:01 UTC
076a3f5 Linus Torvalds 07 February 2019, 07:52:08 UTC Merge tag 'fuse-fixes-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "A fix for a CUSE regression introduced in v4.20, as well as fixes for a couple of old bugs" * tag 'fuse-fixes-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: decrement NR_WRITEBACK_TEMP on the right page fuse: call pipe_buf_release() under pipe lock cuse: fix ioctl fuse: handle zero sized retrieve correctly 07 February 2019, 07:52:08 UTC
b66bc77 Linus Torvalds 07 February 2019, 07:47:08 UTC Merge tag 'pinctrl-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Mediatek Kconfig fix - Sunxi regulator, IRQ banks and pin base fixup - Intel Cherryview Strago DMI workaround - Potential regmap problem on mcp23s08 * tag 'pinctrl-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18 pinctrl: cherryview: fix Strago DMI workaround pinctrl: sunxi: Consider pin_base when calculating regulator array index pinctrl: sunxi: Fix and simplify pin bank regulator handling pinctrl: mediatek: fix Kconfig build errors for moore core 07 February 2019, 07:47:08 UTC
e8c32c3 Bjorn Helgaas 05 February 2019, 20:47:21 UTC net: Don't default Cavium PTP driver to 'y' 8c56df372bc1 ("net: add support for Cavium PTP coprocessor") added the Cavium PTP coprocessor driver and enabled it by default. Remove the "default y" because the driver only applies to Cavium ThunderX processors. Fixes: 8c56df372bc1 ("net: add support for Cavium PTP coprocessor") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 03:48:15 UTC
d2901b0 Yang Wei 05 February 2019, 16:25:54 UTC net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in sbdma_tx_process() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
e0cbbc6 Yang Wei 05 February 2019, 16:22:54 UTC net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in velocity_free_tx_buf() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
f4ad1a6 Yang Wei 05 February 2019, 16:21:31 UTC net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in bdx_tx_cleanup() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
98fcd70 Yang Wei 05 February 2019, 16:19:44 UTC net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
7c3850a Yang Wei 05 February 2019, 16:14:51 UTC net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in hdlc_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
c50e964 Yang Wei 05 February 2019, 16:12:04 UTC net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in mpc52xx_fec_tx_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
bb6a702 Yang Wei 05 February 2019, 16:09:41 UTC net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in epic_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
96d2650 Yang Wei 05 February 2019, 16:07:03 UTC net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in dscc4_tx_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
62d1a31 Yang Wei 05 February 2019, 16:03:51 UTC net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in de_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
3703a39 Yang Wei 05 February 2019, 16:01:04 UTC net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in dfx_xmt_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:38:15 UTC
218d05c Tonghao Zhang 28 January 2019, 23:28:06 UTC net/mlx5e: Don't overwrite pedit action when multiple pedit used In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6b10a ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:12:13 UTC
6707f74 Tonghao Zhang 28 January 2019, 23:28:05 UTC net/mlx5e: Update hw flows when encap source mac changed When we offload tc filters to hardware, hardware flows can be updated when mac of encap destination ip is changed. But we ignore one case, that the mac of local encap ip can be changed too, so we should also update them. To fix it, add route_dev in mlx5e_encap_entry struct to save the local encap netdevice, and when mac changed, kernel will flush all the neighbour on the netdevice and send NETEVENT_NEIGH_UPDATE event. The mlx5 driver will delete the flows and add them when neighbour available again. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Cc: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 01:12:13 UTC
2ba036b David S. Miller 07 February 2019, 00:53:33 UTC Merge branch 'qed-Bug-fixes' Manish Chopra says: ==================== qed*: Bug fixes. This series contains general qed/qede fixes. Please consider applying this to "net" ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:33 UTC
42dbcd6 Manish Chopra 06 February 2019, 22:43:47 UTC qed*: Advance drivers version to 8.37.0.20 Version update for qed/qede modules. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:33 UTC
8c85025 Rahul Verma 06 February 2019, 22:43:46 UTC qed: Change verbosity for coalescing message. Fix unnecessary logging of message in an expected default case where coalescing value read (via ethtool -c) migh not be valid unless they are configured explicitly in the hardware using ethtool -C. Signed-off-by: Rahul Verma <rverma@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:33 UTC
0aa4feb Sudarsana Reddy Kalluru 06 February 2019, 22:43:45 UTC qede: Fix system crash on configuring channels. Under heavy traffic load, when changing number of channels via ethtool (ethtool -L) which will cause interface to be reloaded, it was observed that some packets gets transmitted on old TX channel/queue id which doesn't really exist after the channel configuration leads to system crash. Add a safeguard in the driver by validating queue id through ndo_select_queue() which is called before the ndo_start_xmit(). Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:33 UTC
fb1faab Sudarsana Reddy Kalluru 06 February 2019, 22:43:44 UTC qed: Consider TX tcs while deriving the max num_queues for PF. Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:33 UTC
ebd873a Sudarsana Reddy Kalluru 06 February 2019, 22:43:43 UTC qed: Assign UFP TC value to vlan priority in UFP mode. In the case of Unified Fabric Port (UFP) mode, switch provides the traffic class (TC) value to be used for the traffic. Configure hardware to use this TC value for vlan priority. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:32 UTC
660492b Manish Chopra 06 February 2019, 22:43:42 UTC qed: Fix EQ full firmware assert. When slowpath messages are sent with high rate, the resulting events can lead to a FW assert in case they are not handled fast enough (Event Queue Full assert). Attempt to send queued slowpath messages only after the newly evacuated entries in the EQ ring are indicated to FW. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 February 2019, 00:53:32 UTC
78eb1ca Dave Airlie 07 February 2019, 00:36:43 UTC Merge branch 'vmwgfx-fixes-5.0-2' of git://people.freedesktop.org/~thomash/linux into drm-fixes A patch set from Christoph for vmwgfx dma mode detection breakage with the new dma code restructuring in 5.0 A couple of fixes also CC'd stable Finally an improved IOMMU detection that automatically enables dma mapping also with other vIOMMUS than the intel one if present and enabled. Currently trying to start a VM in that case would fail catastrophically. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190206194735.4663-1-thellstrom@vmware.com 07 February 2019, 00:36:47 UTC
8628752 Dave Airlie 07 February 2019, 00:25:27 UTC Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes - Fix missing freesync properties on eDP - Fix locking in pasid mgr - Fix clang warning in kfd - DC/powerplay fix - Fix reported rev ids on raven - Doorbell fix for vega20 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190205231301.3815-1-alexander.deucher@amd.com 07 February 2019, 00:25:31 UTC
f57a98e Thinh Nguyen 06 February 2019, 23:17:27 UTC PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) There are at least four different parts with the same Vendor and Device ID ([16c3:abcd]): 1) Synopsys HAPS USB3 controller 2) Synopsys PCIe Root Port in Freescale/NXP i.MX6Q (reported by Lucas) 3) Synopsys PCIe Root Port in Freescale/NXP i.MX6QP (reported by Lukas) 4) Synopsys PCIe Root Port in Freescale/NXP i.MX7D (reported by Trent) The HAPS USB3 controller has a Class Code of PCI_CLASS_SERIAL_USB_XHCI, which means the XHCI driver would normally claim it. Previously, quirk_synopsys_haps() changed the Class Code of all [16c3:abcd] devices, including the Root Ports, to PCI_CLASS_SERIAL_USB_DEVICE to prevent the XHCI driver from claiming them so dwc3-haps can claim them instead. Changing the Class Code of the Root Ports prevents the PCI core from handling them as bridges, so devices below them don't work. Restrict the quirk so it only changes the Class Code for devices that start with the PCI_CLASS_SERIAL_USB_XHCI Class Code, leaving the Root Ports alone. Fixes: 03e6742584af ("PCI: Override Synopsys USB 3.x HAPS device class") Reported-by: Lukas F. Hartmann <lukas@mntmn.com> Reported-by: Trent Piepho <tpiepho@impinj.com> Reported-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 06 February 2019, 23:17:27 UTC
fa8db49 Mike Snitzer 05 February 2019, 22:07:58 UTC dm: don't use bio_trim() afterall bio_trim() has an early return, which makes it _not_ idempotent, if the offset is 0 and the bio's bi_size already matches the requested size. Prior to DM, all users of bio_trim() were fine with this. But DM has exposed the fact that bio_trim()'s early return is incompatible with a cloned bio whose integrity payload must be trimmed via bio_integrity_trim(). Fix this by reverting DM back to doing the equivalent of bio_trim() but in an idempotent manner (so bio_integrity_trim is always performed). Follow-on work is needed to assess what benefit bio_trim()'s early return is providing to its existing callers. Reported-by: Milan Broz <gmazyland@gmail.com> Fixes: 57c36519e4b94 ("dm: fix clone_bio() to trigger blk_recount_segments()") Signed-off-by: Mike Snitzer <snitzer@redhat.com> 06 February 2019, 22:24:37 UTC
645efa8 Mikulas Patocka 05 February 2019, 10:09:00 UTC dm: add memory barrier before waitqueue_active Block core changes to switch bio-based IO accounting to be percpu had a side-effect of altering DM core to now rely on calling waitqueue_active (in both bio-based and request-based) to check if another task is in dm_wait_for_completion(). A memory barrier is needed before calling waitqueue_active(). DM core doesn't piggyback on a preceding memory barrier so it must explicitly use its own. For more details on why using waitqueue_active() without a preceding barrier is unsafe, please see the comment before the waitqueue_active() definition in include/linux/wait.h. Add the missing memory barrier by switching to using wq_has_sleeper(). Fixes: 6f75723190d8 ("dm: remove the pending IO accounting") Fixes: c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> 06 February 2019, 22:24:37 UTC
00670cb Dan Carpenter 06 February 2019, 15:35:15 UTC net: dsa: Fix NULL checking in dsa_slave_set_eee() This function can't succeed if dp->pl is NULL. It will Oops inside the call to return phylink_ethtool_get_eee(dp->pl, e); Fixes: 1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 February 2019, 21:42:54 UTC
e248aa7 Chuck Lever 25 January 2019, 21:54:54 UTC svcrdma: Remove max_sge check at connect time Two and a half years ago, the client was changed to use gathered Send for larger inline messages, in commit 655fec6987b ("xprtrdma: Use gathered Send for large inline messages"). Several fixes were required because there are a few in-kernel device drivers whose max_sge is 3, and these were broken by the change. Apparently my memory is going, because some time later, I submitted commit 25fd86eca11c ("svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee294 ("svcrdma: Reduce max_send_sges"). These too incorrectly assumed in-kernel device drivers would have more than a few Send SGEs available. The fix for the server side is not the same. This is because the fundamental problem on the server is that, whether or not the client has provisioned a chunk for the RPC reply, the server must squeeze even the most complex RPC replies into a single RDMA Send. Failing in the send path because of Send SGE exhaustion should never be an option. Therefore, instead of failing when the send path runs out of SGEs, switch to using a bounce buffer mechanism to handle RPC replies that are too complex for the device to send directly. That allows us to remove the max_sge check to enable drivers with small max_sge to work again. Reported-by: Don Dutile <ddutile@redhat.com> Fixes: 25fd86eca11c ("svcrdma: Don't overrun the SGE array in ...") Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> 06 February 2019, 20:32:34 UTC
e3fdc89 Trond Myklebust 21 January 2019, 20:58:38 UTC nfsd: Fix error return values for nfsd4_clone_file_range() If the parameter 'count' is non-zero, nfsd4_clone_file_range() will currently clobber all errors returned by vfs_clone_file_range() and replace them with EINVAL. Fixes: 42ec3d4c0218 ("vfs: make remap_file_range functions take and...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: J. Bruce Fields <bfields@redhat.com> 06 February 2019, 20:32:05 UTC
43636c8 Tetsuo Handa 21 January 2019, 13:49:37 UTC fs: ratelimit __find_get_block_slow() failure message. When something let __find_get_block_slow() hit all_mapped path, it calls printk() for 100+ times per a second. But there is no need to print same message with such high frequency; it is just asking for stall warning, or at least bloating log files. [ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.873324][T15342] b_state=0x00000029, b_size=512 [ 399.878403][T15342] device loop0 blocksize: 4096 [ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.890400][T15342] b_state=0x00000029, b_size=512 [ 399.895595][T15342] device loop0 blocksize: 4096 [ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.907471][T15342] b_state=0x00000029, b_size=512 [ 399.912506][T15342] device loop0 blocksize: 4096 This patch reduces frequency to up to once per a second, in addition to concatenating three lines into one. [ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 06 February 2019, 19:58:56 UTC
2b1f86b Russell King 06 February 2019, 10:54:54 UTC MAINTAINERS: add maintainer for SFF/SFP/SFP+ support Add maintainer entry for SFF/SFP/SFP+ support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 06 February 2019, 19:53:51 UTC
30363d6 Chengguang Xu 01 February 2019, 03:26:02 UTC m68k: set proper major_num when specifying module param major_num When calling register_blkdev() with specified major device number, the return code is 0 on success. So it seems not correct direct assign return code to variable major_num in this case. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 06 February 2019, 19:50:40 UTC
dd95749 Hans de Goede 03 February 2019, 09:02:07 UTC libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD We've received a bugreport that using LPM with a SAMSUNG MZ7TE512HMHP-000L1 SSD leads to system instability, we already have a quirk for the MZ7TD256HAFV-000L9, which is also a Samsun EVO 840 / PM851 OEM model, so it seems some of these models have a LPM issue. This commits adds a NOLPM quirk for the model string from the new bugeport, to avoid the reported stability issues. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 06 February 2019, 19:47:09 UTC
6dce3c2 Eric Dumazet 04 February 2019, 16:36:06 UTC rxrpc: bad unlock balance in rxrpc_recvmsg When either "goto wait_interrupted;" or "goto wait_error;" paths are taken, socket lock has already been released. This patch fixes following syzbot splat : WARNING: bad unlock balance detected! 5.0.0-rc4+ #59 Not tainted ------------------------------------- syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at: [<ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 but there are no more locks to release! other info that might help us debug this: 1 lock held by syz-executor223/8256: #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798 stack backtrace: CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368 __lock_release kernel/locking/lockdep.c:3601 [inline] lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860 sock_release_ownership include/net/sock.h:1471 [inline] release_sock+0x183/0x1c0 net/core/sock.c:2808 rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg net/socket.c:801 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:797 __sys_recvfrom+0x1ff/0x350 net/socket.c:1845 __do_sys_recvfrom net/socket.c:1863 [inline] __se_sys_recvfrom net/socket.c:1859 [inline] __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446379 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe5da89fd98 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00000000006dbc28 RCX: 0000000000446379 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c R13: 0000000000000000 R14: 0000000000000000 R15: 20c49ba5e353f7cf Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 February 2019, 18:54:07 UTC
45b13b4 Kirill A. Shutemov 06 February 2019, 11:52:53 UTC x86/boot/compressed/64: Do not corrupt EDX on EFER.LME=1 setting RDMSR in the trampoline code overwrites EDX but that register is used to indicate whether 5-level paging has to be enabled and if clobbered, leads to failure to boot on a 5-level paging machine. Preserve EDX on the stack while we are dealing with EFER. Fixes: b677dfae5aa1 ("x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode") Reported-by: Kyle D Pelton <kyle.d.pelton@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: dave.hansen@linux.intel.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Huang <wei@redhat.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190206115253.1907-1-kirill.shutemov@linux.intel.com 06 February 2019, 17:56:18 UTC
d592974 Jens Axboe 06 February 2019, 15:43:07 UTC Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linus Pull NVMe fixes from Christoph for this release. * 'nvme-5.0' of git://git.infradead.org/nvme: nvme-pci: fix rapid add remove sequence nvme: lock NS list changes while handling command effects 06 February 2019, 15:43:07 UTC
5c959d7 Keith Busch 24 January 2019, 01:46:11 UTC nvme-pci: fix rapid add remove sequence A surprise removal may fail to tear down request queues if it is racing with the initial asynchronous probe. If that happens, the remove path won't see the queue resources to tear down, and the controller reset path may create a new request queue on a removed device, but will not be able to make forward progress, deadlocking the pci removal. Protect setting up non-blocking resources from a shutdown by holding the same mutex, and transition to the CONNECTING state after these resources are initialized so the probe path may see the dead controller state before dispatching new IO. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081 Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 06 February 2019, 15:35:33 UTC
e7ad43c Keith Busch 28 January 2019, 16:46:07 UTC nvme: lock NS list changes while handling command effects If a controller supports the NS Change Notification, the namespace scan_work is automatically triggered after attaching a new namespace. Occasionally the namespace scan_work may append the new namespace to the list before the admin command effects handling is completed. The effects handling unfreezes namespaces, but if it unfreezes the newly attached namespace, its request_queue freeze depth will be off and we'll hit the warning in blk_mq_unfreeze_queue(). On the next namespace add, we will fail to freeze that queue due to the previous bad accounting and deadlock waiting for frozen. Fix that by preventing scan work from altering the namespace list while command effects handling needs to pair freeze with unfreeze. Reported-by: Wen Xiong <wenxiong@us.ibm.com> Tested-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 06 February 2019, 15:35:33 UTC
back to top