https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
9e98c67 Linux 5.1-rc1 17 March 2019, 21:22:26 UTC
28d747f Merge tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies 17 March 2019, 20:25:26 UTC
80b98e9 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals 17 March 2019, 16:21:48 UTC
69ebf9a Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption 17 March 2019, 16:19:22 UTC
c5b5138 Merge tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space 17 March 2019, 16:16:22 UTC
db77bef Merge tag '9p-for-5.1' of git://github.com/martinetd/linux Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through 17 March 2019, 16:10:56 UTC
c634dc6 perf/x86/intel: Make dev_attr_allow_tsx_force_abort static Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06 17 March 2019, 07:40:18 UTC
c71bb9f kconfig: remove stale lxdialog/.gitignore When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 06:47:02 UTC
037fc33 kbuild: force all architectures except um to include mandatory-y Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 03:56:32 UTC
7cbbbb8 kbuild: warn redundant generic-y The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 03:56:31 UTC
f84dde1 Revert "modsign: Abort modules_install when signing fails" This reverts commit caf6fe91ddf62a96401e21e9b7a07227440f4185. The commit was fine but is no longer needed as of commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 03:56:31 UTC
0c22be0 kbuild: Make NOSTDINC_FLAGS a simply expanded variable During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb02ce0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 03:56:30 UTC
f6d9db6 kbuild: deb-pkg: avoid implicit effects * The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, ā€œ1.0ā€. The fallback > to ā€œ1.0ā€ is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 03:56:23 UTC
da9cfb8 coccinelle: semantic code search for missing put_device() The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. The implementation of this semantic code search is: In a function, for a local variable returned by calling of_find_device_by_node(), a, if it is released by a function such as put_device()/of_dev_put()/platform_device_put() after the last use, it is considered that there is no reference leak; b, if it is passed back to the caller via dev_get_drvdata()/platform_get_drvdata()/get_device(), etc., the reference will be released in other functions, and the current function also considers that there is no reference leak; c, for the rest of the situation, the current function should release the reference by calling put_device, this code search will report the corresponding error message. By using this semantic code search, we have found some object reference leaks, such as: commit 11907e9d3533 ("ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe") commit a12085d13997 ("mtd: rawnand: atmel: fix possible object reference leak") commit 11493f26856a ("mtd: rawnand: jz4780: fix possible object reference leak") There are still dozens of reference leaks in the current kernel code. Further, for the case of b, the object returned to other functions may also have a reference leak, we will continue to develop other cocci scripts to further check the reference leak. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 17 March 2019, 03:55:45 UTC
a9dce66 Merge tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall 16 March 2019, 20:47:14 UTC
f67e3fb Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida 16 March 2019, 20:05:32 UTC
477558d Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ... 16 March 2019, 19:51:50 UTC
11efae3 Merge tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block Pull more block layer changes from Jens Axboe: "This is a collection of both stragglers, and fixes that came in after I finalized the initial pull. This contains: - An MD pull request from Song, with a few minor fixes - Set of NVMe patches via Christoph - Pull request from Konrad, with a few fixes for xen/blkback - pblk fix IO calculation fix (Javier) - Segment calculation fix for pass-through (Ming) - Fallthrough annotation for blkcg (Mathieu)" * tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits) blkcg: annotate implicit fall through nvme-tcp: support C2HData with SUCCESS flag nvmet: ignore EOPNOTSUPP for discard nvme: add proper write zeroes setup for the multipath device nvme: add proper discard setup for the multipath device nvme: remove nvme_ns_config_oncs nvme: disable Write Zeroes for qemu controllers nvmet-fc: bring Disconnect into compliance with FC-NVME spec nvmet-fc: fix issues with targetport assoc_list list walking nvme-fc: reject reconnect if io queue count is reduced to zero nvme-fc: fix numa_node when dev is null nvme-fc: use nr_phys_segments to determine existence of sgl nvme-loop: init nvmet_ctrl fatal_err_work when allocate nvme: update comment to make the code easier to read nvme: put ns_head ref if namespace fails allocation nvme-trace: fix cdw10 buffer overrun nvme: don't warn on block content change effects nvme: add get-feature to admin cmds tracer md: Fix failed allocation of md_register_thread It's wrong to add len to sector_nr in raid10 reshape twice ... 16 March 2019, 19:36:39 UTC
465c209 Merge tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfixes: - Fix an Oops in SUNRPC back channel tracepoints - Fix a SUNRPC client regression when handling oversized replies - Fix the minimal size for SUNRPC reply buffer allocation - rpc_decode_header() must always return a non-zero value on error - Fix a typo in pnfs_update_layout() Cleanup: - Remove redundant check for the reply length in call_decode()" * tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove redundant check for the reply length in call_decode() SUNRPC: Handle the SYSTEM_ERR rpc error SUNRPC: rpc_decode_header() must always return a non-zero value on error SUNRPC: Use the ENOTCONN error on socket disconnect SUNRPC: Fix the minimal size for reply buffer allocation SUNRPC: Fix a client regression when handling oversized replies pNFS: Fix a typo in pnfs_update_layout fix null pointer deref in tracepoints in back channel 16 March 2019, 19:28:18 UTC
a9c55d5 Merge tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix to prevent runtime allocation of 16GB pages when running in a VM (as opposed to bare metal), because it doesn't work. A small fix to our recently added KCOV support to exempt some more code from being instrumented. Plus a few minor build fixes, a small dead code removal and a defconfig update. Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy, Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre" * tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Include <asm/nmi.h> header file to fix a warning powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS powerpc/mm: Disable kcov for SLB routines powerpc: remove dead code in head_fsl_booke.S powerpc/configs: Sync skiroot defconfig powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration 16 March 2019, 17:45:17 UTC
9249735 Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount infrastructure fix from Al Viro: "Fixup for sysfs braino. Capabilities checks for sysfs mount do include those on netns, but only if CONFIG_NET_NS is enabled. Sorry, should've caught that earlier..." * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix sysfs_init_fs_context() in !CONFIG_NET_NS case 16 March 2019, 17:31:02 UTC
ab81dab fix sysfs_init_fs_context() in !CONFIG_NET_NS case Permission checks on current's netns should be done only when netns are enabled. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Fixes: 23bf1b6be9c2 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 16 March 2019, 13:45:42 UTC
9c7dc82 Merge tag '5.1-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6 Pull more smb3 updates from Steve French: "Various tracing and debugging improvements, crediting fixes, some cleanup, and important fallocate fix (fixes three xfstests) and lock fix. Summary: - Various additional dynamic tracing tracepoints - Debugging improvements (including ability to query the server via SMB3 fsctl from userspace tools which can help with stats and debugging) - One minor performance improvement (root directory inode caching) - Crediting (SMB3 flow control) fixes - Some cleanup (docs and to mknod) - Important fixes: one to smb3 implementation of fallocate zero range (which fixes three xfstests) and a POSIX lock fix" * tag '5.1-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (22 commits) CIFS: fix POSIX lock leak and invalid ptr deref SMB3: Allow SMB3 FSCTL queries to be sent to server from tools cifs: fix incorrect handling of smb2_set_sparse() return in smb3_simple_falloc smb2: fix typo in definition of a few error flags CIFS: make mknod() an smb_version_op cifs: minor documentation updates cifs: remove unused value pointed out by Coverity SMB3: passthru query info doesn't check for SMB3 FSCTL passthru smb3: add dynamic tracepoints for simple fallocate and zero range cifs: fix smb3_zero_range so it can expand the file-size when required cifs: add SMB2_ioctl_init/free helpers to be used with compounding smb3: Add dynamic trace points for various compounded smb3 ops cifs: cache FILE_ALL_INFO for the shared root handle smb3: display volume serial number for shares in /proc/fs/cifs/DebugData cifs: simplify how we handle credits in compound_send_recv() smb3: add dynamic tracepoint for timeout waiting for credits smb3: display security information in /proc/fs/cifs/DebugData more accurately cifs: add a timeout argument to wait_for_free_credits cifs: prevent starvation in wait_for_free_credits for multi-credit requests cifs: wait_for_free_credits() make it possible to wait for >=1 credits ... 16 March 2019, 01:52:12 UTC
6c83d0d Merge branch 'for-linus-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "Bugfix for the UML block device driver" * 'for-linus-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix for a possible OOPS in ubd initialization um: Remove duplicated include from vector_user.c 15 March 2019, 22:07:32 UTC
636deed Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ... 15 March 2019, 22:00:28 UTC
aa2e3ac Merge tag 'trace-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes and cleanups from Steven Rostedt: "This contains a series of last minute clean ups, small fixes and error checks" * tag 'trace-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/probe: Verify alloc_trace_*probe() result tracing/probe: Check event/group naming rule at parsing tracing/probe: Check the size of argument name and body tracing/probe: Check event name length correctly tracing/probe: Check maxactive error cases tracing: kdb: Fix ftdump to not sleep trace/probes: Remove kernel doc style from non kernel doc comment tracing/probes: Make reserved_field_names static 15 March 2019, 21:47:02 UTC
323ea40 Merge tag 'iommu-fix-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Fix a NULL-pointer dereference issue in the ACPI device matching code of the AMD IOMMU driver" * tag 'iommu-fix-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix NULL dereference bug in match_hid_uid 15 March 2019, 21:41:30 UTC
0be2886 Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - An improvement from Ard Biesheuvel, who noted that the identity map setup was taking a long time due to flush_cache_louis(). - Update a comment about dma_ops from Wolfram Sang. - Remove use of "-p" with ld, where this flag has been a no-op since 2004. - Remove the printing of the virtual memory layout, which is no longer useful since we hide pointers. - Correct SCU help text. - Remove legacy TWD registration method. - Add pgprot_device() implementation for mapping PCI sysfs resource files. - Initialise PFN limits earlier for kmemleak. - Fix argument count to match macro definition (affects clang builds) - Use unified assembler language almost everywhere for clang, and other clang improvements (from Stefan Agner, Nathan Chancellor). - Support security extension for noMMU and other noMMU cleanups (from Vladimir Murzin). - Remove unnecessary SMP bringup code (which was incorrectly copy'n' pasted from the ARM platform implementations) and remove it from the arch code to discourge further copys of it appearing. - Add Cortex A9 erratum preventing kexec working on some SoCs. - AMBA bus identification updates from Mike Leach. - More use of raw spinlocks to avoid -RT kernel issues (from Yang Shi and Sebastian Andrzej Siewior). - MCPM hyp/svc mode mismatch fixes from Marek Szyprowski. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4 ARM: 8848/1: virt: Align GIC version check with arm64 counterpart ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used ARM: 8845/1: use unified assembler in c files ARM: 8844/1: use unified assembler in assembly files ARM: 8843/1: use unified assembler in headers ARM: 8841/1: use unified assembler in macros ARM: 8840/1: use a raw_spinlock_t in unwind ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI support ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight UCI values. ARM: 8838/1: drivers: amba: Updates to component identification for driver matching. ARM: 8833/1: Ensure that NEON code always compiles with Clang ARM: avoid Cortex-A9 livelock on tight dmb loops ARM: smp: remove arch-provided "pen_release" ARM: actions: remove boot_lock and pen_release ARM: oxnas: remove CPU hotplug implementation ARM: qcom: remove unnecessary boot_lock ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE} ARM: 8831/1: NOMMU: pmsa-v8: remove unneeded semicolon ... 15 March 2019, 21:37:46 UTC
e8a71a3 Merge tag 'ntb-5.1' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: - fixes for switchtec debugability and mapping table entries - NTB transport improvements - a reworking of the peer_db_addr for better abstraction * tag 'ntb-5.1' of git://github.com/jonmason/ntb: NTB: add new parameter to peer_db_addr() db_bit and db_data NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup() ntb_hw_switchtec: Added support of >=4G memory windows ntb_hw_switchtec: NT req id mapping table register entry number should be 512 ntb_hw_switchtec: debug print 64bit aligned crosslink BAR Numbers 15 March 2019, 21:32:59 UTC
2b9c272 Merge tag 'fbdev-v5.1' of git://github.com/bzolnier/linux Pull fbdev updates from Bartlomiej Zolnierkiewicz: "Just a couple of small fixes and cleanups: - fix memory access if logo is bigger than the screen (Manfred Schlaegl) - silence fbcon logo on 'quiet' boots (Prarit Bhargava) - use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko) - misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu Malaterre, Anders Roxell, Arnd Bergmann) - misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman, Jani Nikula, Michal VokĆ”Ä)" * tag 'fbdev-v5.1' of git://github.com/bzolnier/linux: fbdev: mbx: fix a misspelled variable name fbdev: omap2: fix warnings in dss core video: fbdev: Fix potential NULL pointer dereference fbcon: Silence fbcon logo on 'quiet' boots printk: Export console_printk ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity video: ssd1307fb: Do not hard code active-low reset sequence dt-bindings: display: ssd1307fb: Remove reset-active-low from examples fbdev: fbmem: fix memory access if logo is bigger than the screen video/fbdev: refactor video= cmdline parsing fbdev: mbx: fix up debugfs file creation fbdev: omap2: no need to check return value of debugfs_create functions video: fbdev: geode: remove ifdef OLPC noise video: offb: annotate implicit fall throughs omapfb: fix typo fbdev: Use of_node_name_eq for node name comparisons fbcon: use kvmalloc() for scrollback buffer fbdev: chipsfb: remove set but not used variable 'size' fbdev/via: fix spelling mistake "Expandsion" -> "Expansion" 15 March 2019, 21:22:59 UTC
51b1ac0 Merge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A set of driver bugfixes and an improvement for a core helper" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-designware-platdrv: Always use a dynamic adapter number i2c: i2c-designware-platdrv: Cleanup setting of the adapter number i2c: add extra check to safe DMA buffer helper i2c: i2c-stm32f7: Fix SDADEL minimum formula i2c: rcar: explain the lockless design i2c: rcar: fix concurrency issue related to ICDMAER i2c: sis630: correct format strings i2c: mediatek: modify threshold passed to i2c_get_dma_safe_msg_buf() 15 March 2019, 21:16:28 UTC
2dbb0e6 Merge tag 'sound-fix-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Some cleaning after the first batch; mostly about HD-audio quirks but also some NULL dereference fixes in corner cases and a random build error fix, too" * tag 'sound-fix-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook ALSA: pcm: Fix function name in kernel-doc comment ALSA: hda: hdmi - add Icelake support ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 ALSA: hda/realtek - Fixed Headset Mic JD not stable ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 ALSA: hda/tegra: avoid build error without CONFIG_PM ALSA: usx2y: Fix potential NULL pointer dereference ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start() 15 March 2019, 21:05:00 UTC
8264fd0 Merge tag 'drm-next-2019-03-15' of git://anongit.freedesktop.org/drm/drm Pull drm fixes and updates from Dave Airlie: "A few various fixes pulls and one late etnaviv pull but it was nearly all fixes anyways. etnaviv: - late next pull - mmu mapping fix - build non-ARM arches - misc fixes i915: - HDCP state handling fix - shrinker interaction fix - atomic state leak fix qxl: - kick out framebuffers early fix amdgpu: - Powerplay fixes - DC fixes - BACO turned off for now on vega20 - Locking fix - KFD MQD fix - gfx9 golden register updates" * tag 'drm-next-2019-03-15' of git://anongit.freedesktop.org/drm/drm: (43 commits) drm/amdgpu: Update gc golden setting for vega family drm/amd/powerplay: correct power reading on fiji drm/amd/powerplay: set max fan target temperature as 105C drm/i915: Relax mmap VMA check drm/i915: Fix atomic state leak when resetting HDMI link drm/i915: Acquire breadcrumb ref before cancelling drm/i915/selftests: Always free spinner on __sseu_prepare error drm/i915: Reacquire priolist cache after dropping the engine lock drm/i915: Protect i915_active iterators from the shrinker drm/i915: HDCP state handling in ddi_update_pipe drm/qxl: remove conflicting framebuffers earlier drm/fb-helper: call vga_remove_vgacon automatically. drm: move i915_kick_out_vgacon to vgaarb drm/amd/display: don't call dm_pp_ function from an fpu block drm: add __user attribute to ptr_to_compat() drm/amdgpu: clear PDs/PTs only after initializing them drm/amd/display: Pass app_tf by value rather than by reference Revert "drm/amdgpu: use BACO reset on vega20 if platform support" drm/amd/powerplay: show the right override pcie parameters drm/amd/powerplay: honor the OD settings ... 15 March 2019, 20:58:35 UTC
de57818 Merge tag 'xfs-5.1-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs cleanups from Darrick Wong: "Here's a few more cleanups that trickled in for the merge window. It's all fixes for static checker complaints and slowly unwinding typedef usage. The four patches here have gone through a few days worth of fstest runs with no new problems observed. Summary: - Fix some clang/smatch/sparse warnings about uninitialized variables. - Clean up some typedef usage" * tag 'xfs-5.1-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: clean up xfs_dir2_leaf_addname xfs: zero initialize highstale and lowstale in xfs_dir2_leaf_addname xfs: clean up xfs_dir2_leafn_add xfs: Zero initialize highstale and lowstale in xfs_dir2_leafn_add 15 March 2019, 20:55:30 UTC
5160bcc Merge tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "We've continued mainly to fix bugs in this round, as f2fs has been shipped in more devices. Especially, we've focused on stabilizing checkpoint=disable feature, and provided some interfaces for QA. Enhancements: - expose FS_NOCOW_FL for pin_file - run discard jobs at unmount time with timeout - tune discarding thread to avoid idling which consumes power - some checking codes to address vulnerabilities - give random value to i_generation - shutdown with more flags for QA Bug fixes: - clean up stale objects when mount is failed along with checkpoint=disable - fix system being stuck due to wrong count by atomic writes - handle some corrupted disk cases - fix a deadlock in f2fs_read_inline_dir We've also added some minor build error fixes and clean-up patches" * tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (53 commits) f2fs: set pin_file under CAP_SYS_ADMIN f2fs: fix to avoid deadlock in f2fs_read_inline_dir() f2fs: fix to adapt small inline xattr space in __find_inline_xattr() f2fs: fix to do sanity check with inode.i_inline_xattr_size f2fs: give some messages for inline_xattr_size f2fs: don't trigger read IO for beyond EOF page f2fs: fix to add refcount once page is tagged PG_private f2fs: remove wrong comment in f2fs_invalidate_page() f2fs: fix to use kvfree instead of kzfree f2fs: print more parameters in trace_f2fs_map_blocks f2fs: trace f2fs_ioc_shutdown f2fs: fix to avoid deadlock of atomic file operations f2fs: fix to dirty inode for i_mode recovery f2fs: give random value to i_generation f2fs: no need to take page lock in readdir f2fs: fix to update iostat correctly in IPU path f2fs: fix encrypted page memory leak f2fs: make fault injection covering __submit_flush_wait() f2fs: fix to retry fill_super only if recovery failed f2fs: silence VM_WARN_ON_ONCE in mempool_alloc ... 15 March 2019, 20:42:53 UTC
f91f2ee Merge branch 'akpm' (rest of patches from Andrew) Merge the left-over patches from Andrew Morton. This merges the remaining two patches from Andrew's pile of "little bit more MM". I mulled it over, and we emailed back and forth with Josef, and he pointed out where I was wrong. Rule #51 of kernel maintenance: when somebody makes it clear that they know the code better than you did, stop arguing and just apply the damn patch. Add a third patch by me to add a comment for the case that I had thought was buggy and Josef corrected me on. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: filemap: add a comment about FAULT_FLAG_RETRY_NOWAIT behavior filemap: drop the mmap_sem for all blocking operations filemap: kill page_cache_read usage in filemap_fault 15 March 2019, 19:00:45 UTC
8b0f9fa filemap: add a comment about FAULT_FLAG_RETRY_NOWAIT behavior I thought Josef Bacik's patch to drop the mmap_sem was buggy, because when looking at the error cases, there was one case where we returned VM_FAULT_RETRY without actually dropping the mmap_sem. Josef had to explain to me (using small words) that yes, that's actually what we're supposed to do, and his patch was correct. Which not only convinced me he knew what he was doing and I should stop arguing with him, but also that I should add a comment to the case I was confused about. Patiently-pointed-out-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 March 2019, 18:26:07 UTC
4a605bc kvm: vmx: fix formatting of a comment Eliminate a gratuitous conflict with 5.0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 March 2019, 18:24:34 UTC
eca6be5 KVM: doc: Document the life cycle of a VM and its resources The series to add memcg accounting to KVM allocations[1] states: There are many KVM kernel memory allocations which are tied to the life of the VM process and should be charged to the VM process's cgroup. While it is correct to account KVM kernel allocations to the cgroup of the process that created the VM, it's technically incorrect to state that the KVM kernel memory allocations are tied to the life of the VM process. This is because the VM itself, i.e. struct kvm, is not tied to the life of the process which created it, rather it is tied to the life of its associated file descriptor. In other words, kvm_destroy_vm() is not invoked until fput() decrements its associated file's refcount to zero. A simple example is to fork() in Qemu and have the child sleep indefinitely; kvm_destroy_vm() isn't called until Qemu closes its file descriptor *and* the rogue child is killed. The allocations are guaranteed to be *accounted* to the process which created the VM, but only because KVM's per-{VM,vCPU} ioctls reject the ioctl() with -EIO if kvm->mm != current->mm. I.e. the child can keep the VM "alive" but can't do anything useful with its reference. Note that because 'struct kvm' also holds a reference to the mm_struct of its owner, the above behavior also applies to userspace allocations. Given that mucking with a VM's file descriptor can lead to subtle and undesirable behavior, e.g. memcg charges persisting after a VM is shut down, explicitly document a VM's lifecycle and its impact on the VM's resources. Alternatively, KVM could aggressively free resources when the creating process exits, e.g. via mmu_notifier->release(). However, mmu_notifier isn't guaranteed to be available, and freeing resources when the creator exits is likely to be error prone and fragile as KVM would need to ensure that it only freed resources that are truly out of reach. In practice, the existing behavior shouldn't be problematic as a properly configured system will prevent a child process from being moved out of the appropriate cgroup hierarchy, i.e. prevent hiding the process from the OOM killer, and will prevent an unprivileged user from being able to to hold a reference to struct kvm via another method, e.g. debugfs. [1]https://patchwork.kernel.org/patch/10806707/ Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 March 2019, 18:24:33 UTC
6b4c9f4 filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 March 2019, 18:21:25 UTC
a75d4c3 filemap: kill page_cache_read usage in filemap_fault Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 March 2019, 18:21:25 UTC
c7a0e83 Merge tag 'kvm-ppc-next-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD Third PPC KVM update for 5.1 - Tell userspace about whether a particular hardware workaround for one of the Spectre vulnerabilities is available, so that userspace can inform the guest. 15 March 2019, 18:16:51 UTC
4633323 MAINTAINERS: Add KVM selftests to existing KVM entry It's safe to assume Paolo and Radim are maintaining the KVM selftests given that the vast majority of commits have their SOBs. Play nice with get_maintainers and make it official. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 March 2019, 18:16:48 UTC
92da008 Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" This reverts commit 71883a62fcd6c70639fa12cda733378b4d997409. The above commit contains an optimization to kvm_zap_gfn_range which uses gfn-limited TLB flushes, if enabled. If using these limited flushes, kvm_zap_gfn_range passes lock_flush_tlb=false to slot_handle_level_range which creates a race when the function unlocks to call cond_resched. See an example of this race below: CPU 0 CPU 1 CPU 3 // zap_direct_gfn_range mmu_lock() // *ptep == pte_1 *ptep = 0 if (lock_flush_tlb) flush_tlbs() mmu_unlock() // In invalidate range // MMU notifier mmu_lock() if (pte != 0) *ptep = 0 flush = true if (flush) flush_remote_tlbs() mmu_unlock() return // Host MM reallocates // page previously // backing guest memory. // Guest accesses // invalid page // through pte_1 // in its TLB!! Tested: Ran all kvm-unit-tests on a Intel Haswell machine with and without this patch. The patch introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 15 March 2019, 18:16:45 UTC
52eaa79 scsi: ia64: simscsi: use request tag instead of serial_number Use the request tag for logging instead of the scsi command serial number. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [jejb: fix commit oneliner] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 15 March 2019, 17:53:41 UTC
5e3863f SUNRPC: Remove redundant check for the reply length in call_decode() Now that we're using the xdr_stream functions to decode the header, the test for the minimum reply length is redundant. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 15 March 2019, 17:11:36 UTC
928d42f SUNRPC: Handle the SYSTEM_ERR rpc error Handle the SYSTEM_ERR rpc error by retrying the RPC call as if it were a garbage argument. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 15 March 2019, 17:11:02 UTC
eb90a16 SUNRPC: rpc_decode_header() must always return a non-zero value on error Ensure that when the "garbage args" case falls through, we do set an error of EIO. Fixes: a0584ee9aed8 ("SUNRPC: Use struct xdr_stream when decoding...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 15 March 2019, 17:08:59 UTC
27adc78 SUNRPC: Use the ENOTCONN error on socket disconnect When the socket is closed, we currently send an EAGAIN error to all pending requests in order to ask them to retransmit. Use ENOTCONN instead, to ensure that they try to reconnect before attempting to transmit. This also helps SOFTCONN tasks to behave correctly in this situation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 15 March 2019, 17:08:20 UTC
5131496 SUNRPC: Fix the minimal size for reply buffer allocation We must at minimum allocate enough memory to be able to see any auth errors in the reply from the server. Fixes: 2c94b8eca1a26 ("SUNRPC: Use au_rslack when computing reply...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 15 March 2019, 17:06:35 UTC
9734ad5 SUNRPC: Fix a client regression when handling oversized replies If the server sends a reply that is larger than the pre-allocated buffer, then the current code may fail to register how much of the stream that it has finished reading. This again can lead to hangs. Fixes: e92053a52e68 ("SUNRPC: Handle zero length fragments correctly") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 15 March 2019, 17:06:21 UTC
bb6bccb iommu/amd: Fix NULL dereference bug in match_hid_uid Add a non-NULL check to fix potential NULL pointer dereference Cleanup code to call function once. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Fixes: 2bf9a0a12749b ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: Joerg Roedel <jroedel@suse.de> 15 March 2019, 15:22:05 UTC
4c2741a Merge branches 'fixes', 'misc' and 'smp-hotplug' into for-next 15 March 2019, 15:12:56 UTC
0266def xen/balloon: Fix mapping PG_offline pages to user space The XEN balloon driver - in contrast to other balloon drivers - allows to map some inflated pages to user space. Such pages are allocated via alloc_xenballooned_pages() and freed via free_xenballooned_pages(). The pfn space of these allocated pages is used to map other things by the hypervisor using hypercalls. Pages marked with PG_offline must never be mapped to user space (as this page type uses the mapcount field of struct pages). So what we can do is, clear/set PG_offline when allocating/freeing an inflated pages. This way, most inflated pages can be excluded by dumping tools and the "reused for other purpose" balloon pages are correctly not marked as PG_offline. Fixes: 77c4adf6a6df (xen/balloon: mark inflated pages PG_offline) Reported-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> 15 March 2019, 14:35:35 UTC
f764c58 perf/x86: Fixup typo in stub functions Guenter reported a build warning for CONFIG_CPU_SUP_INTEL=n: > With allmodconfig-CONFIG_CPU_SUP_INTEL, this patch results in: > > In file included from arch/x86/events/amd/core.c:8:0: > arch/x86/events/amd/../perf_event.h:1036:45: warning: ā€˜struct cpu_hw_eventā€™ declared inside parameter list will not be visible outside of this definition or declaration > static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu) While harmless (an unsed pointer is an unused pointer, no matter the type) it needs fixing. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: d01b1f96a82e ("perf/x86/intel: Make cpuc allocations consistent") Link: http://lkml.kernel.org/r/20190315081410.GR5996@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> 15 March 2019, 12:12:42 UTC
ede271b perf/x86/intel: Fix memory corruption Through: validate_event() x86_pmu.get_event_constraints(.idx=-1) tfa_get_event_constraints() dyn_constraint() cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access. In this case, simply skip the TFA constraint code, there is no event constraint with just PMC3, therefore the code will never result in the empty set. Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by: Tony Jones <tonyj@suse.com> Reported-by: "DSouza, Nelson" <nelson.dsouza@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Jones <tonyj@suse.com> Tested-by: "DSouza, Nelson" <nelson.dsouza@intel.com> Cc: eranian@google.com Cc: jolsa@redhat.com Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20190314130705.441549378@infradead.org 15 March 2019, 11:22:51 UTC
bc31d0c CIFS: fix POSIX lock leak and invalid ptr deref We have a customer reporting crashes in lock_get_status() with many "Leaked POSIX lock" messages preceeding the crash. Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709 Leaked POSIX lock on dev=0x0:0x4b ino... Leaked locks on dev=0x0:0x4b ino=0xf911400000029: POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592 stack segment: 0000 [#1] SMP Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000 RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0 RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202 RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50 RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340 R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340 FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18 ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340 ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28 Call Trace: [<ffffffff8125e08f>] locks_show+0x2f/0x70 [<ffffffff81230ad1>] seq_read+0x251/0x3a0 [<ffffffff81275bbc>] proc_reg_read+0x3c/0x70 [<ffffffff8120e456>] __vfs_read+0x26/0x140 [<ffffffff8120e9da>] vfs_read+0x7a/0x120 [<ffffffff8120faf2>] SyS_read+0x42/0xa0 [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7 When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls filp_close() which also removes all posix locks. The lock struct is initialized like so in filp_close() and passed down to cifs ... lock.fl_type = F_UNLCK; lock.fl_flags = FL_POSIX | FL_CLOSE; lock.fl_start = 0; lock.fl_end = OFFSET_MAX; ... Note the FL_CLOSE flag, which hints the VFS code that this unlocking is done for closing the fd. filp_close() locks_remove_posix(filp, id); vfs_lock_file(filp, F_SETLK, &lock, NULL); return filp->f_op->lock(filp, cmd, fl) => cifs_lock() rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid); rc = server->ops->mand_unlock_range(cfile, flock, xid); if (flock->fl_flags & FL_POSIX && !rc) rc = locks_lock_file_wait(file, flock) Notice how we don't call locks_lock_file_wait() which does the generic VFS lock/unlock/wait work on the inode if rc != 0. If we are closing the handle, the SMB server is supposed to remove any locks associated with it. Similarly, cifs.ko frees and wakes up any lock and lock waiter when closing the file: cifs_close() cifsFileInfo_put(file->private_data) /* * Delete any outstanding lock records. We'll lose them when the file * is closed anyway. */ down_write(&cifsi->lock_sem); list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) { list_del(&li->llist); cifs_del_lock_waiters(li); kfree(li); } list_del(&cifs_file->llist->llist); kfree(cifs_file->llist); up_write(&cifsi->lock_sem); So we can safely ignore unlocking failures in cifs_lock() if they happen with the FL_CLOSE flag hint set as both the server and the client take care of it during the actual closing. This is not a proper fix for the unlocking failure but it's safe and it seems to prevent the lock leakages and crashes the customer experiences. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:36 UTC
f5778c3 SMB3: Allow SMB3 FSCTL queries to be sent to server from tools For debugging purposes we often have to be able to query additional information only available via SMB3 FSCTL from the server from user space tools (e.g. like cifs-utils's smbinfo). See MS-FSCC and MS-SMB2 protocol specifications for more details. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 15 March 2019, 00:32:36 UTC
f169947 cifs: fix incorrect handling of smb2_set_sparse() return in smb3_simple_falloc smb2_set_sparse does not return -errno, it returns a boolean where true means success. Change this to just ignore the return value just like the other callsites. Additionally add code to handle the case where we must set the file sparse and possibly also extending it. Fixes xfstests: generic/236 generic/350 generic/420 Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 15 March 2019, 00:32:36 UTC
dd0ac2d smb2: fix typo in definition of a few error flags As Sergey Senozhatsky pointed out __constant_cpu_to_le32() is misspelled in a few definitions in the list of status codes smb2status.h as __constanst_cpu_to_le32() Signed-off-by: Steve French <stfrench@microsoft.com> CC: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> 15 March 2019, 00:32:36 UTC
c847dcc CIFS: make mknod() an smb_version_op This cleanup removes cifs specific code from SMB2/SMB3 code paths which is cleaner and easier to maintain as the code to handle special files is improved. Below is an example creating special files using 'sfu' mount option over SMB3 to Windows (with this patch) (Note that to Samba server, support for saving dos attributes has to be enabled for the SFU mount option to work). In the future this will also make implementation of creating special files as reparse points easier (as Windows NFS server does for example). root@smf-Thinkpad-P51:~# stat -c "%F" /mnt2/char character special file root@smf-Thinkpad-P51:~# stat -c "%F" /mnt2/block block special file Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> 15 March 2019, 00:32:36 UTC
6552580 cifs: minor documentation updates Also updated a comment describing use of the GlobalMid_Lock Signed-off-by: Steve French <stfrench@microsoft.com> 15 March 2019, 00:32:36 UTC
d44d137 cifs: remove unused value pointed out by Coverity Detected by CoverityScan CID#1438719 ("Unused Value") buf is reset again before being used so these two lines of code are useless. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> 15 March 2019, 00:32:36 UTC
31ba433 SMB3: passthru query info doesn't check for SMB3 FSCTL passthru The passthrough queries from user space tools like smbinfo can be either SMB3 QUERY_INFO or SMB3 FSCTL, but we are not checking for the latter. Temporarily we return EOPNOTSUPP for SMB3 FSCTL passthrough requests but once compounding fsctls is fixed can enable. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> 15 March 2019, 00:32:36 UTC
779ede0 smb3: add dynamic tracepoints for simple fallocate and zero range Can be helpful in debugging various xfstests that are currently skipped or failing due to missing features in our current implementation of fallocate. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> 15 March 2019, 00:32:35 UTC
72c419d cifs: fix smb3_zero_range so it can expand the file-size when required This allows fallocate -z to work against a Windows2016 share. This is due to the SMB3 ZERO_RANGE command does not modify the filesize. To address this we will now append a compounded SET-INFO to update the end-of-file information. This brings xfstests generic/469 closer to working against a windows share. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 15 March 2019, 00:32:35 UTC
ccdc77a cifs: add SMB2_ioctl_init/free helpers to be used with compounding Define an _init() and a _free() function for SMB2_init so that we will be able to use it with compounds. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 15 March 2019, 00:32:35 UTC
8191576 smb3: Add dynamic trace points for various compounded smb3 ops Adds trace points for enter and exit (done vs. error) for: compounded query and setinfo, hardlink, rename, mkdir, rmdir, set_eof, delete (unlink) Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> 15 March 2019, 00:32:35 UTC
b0f6df7 cifs: cache FILE_ALL_INFO for the shared root handle When we open the shared root handle also ask for FILE_ALL_INFORMATION since we can do this at zero cost as part of a compound. Cache this information as long as the lease is held and return and serve any future requests from cache. This allows us to serve "stat /<mountpoint>" directly from cache and avoid a network roundtrip. Since clients often want to do this quite a lot this improve performance slightly. As an example: xfstest generic/533 performs 43 stat operations on the root of the share while it is run. Which are eliminated with this patch. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
ab7b10c smb3: display volume serial number for shares in /proc/fs/cifs/DebugData It can be helpful for debugging. According to MS-FSCC: "A 32-bit unsigned integer that contains the serial number of the volume. The serial number is an opaque value generated by the file system at format time" Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
257b780 cifs: simplify how we handle credits in compound_send_recv() Since we can now wait for multiple requests atomically in wait_for_free_request() we can now greatly simplify the handling of the credits in this function. This fixes a potential deadlock where many concurrent compound requests could each have reserved 1 or 2 credits each but are all blocked waiting for the final credits they need to be able to issue the requests to the server. Set a default timeout of 60 seconds for compounded requests. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
7937ca9 smb3: add dynamic tracepoint for timeout waiting for credits To help debug credit starvation problems where we timeout waiting for server to grant the client credits. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
ffd1ef1 smb3: display security information in /proc/fs/cifs/DebugData more accurately When the server required encryption (but we didn't connect to it with the "seal" mount option) we weren't displaying in /proc/fs/cifs/DebugData that the tcon for that share was encrypted. Similarly we were not displaying that signing was required when ses->sign was enabled (we only checked ses->server->sign). This makes it easier to debug when in fact the connection is signed (or sealed), whether for performance or security questions. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> 15 March 2019, 00:32:35 UTC
2b53b92 cifs: add a timeout argument to wait_for_free_credits A negative timeout is the same as the current behaviour, i.e. no timeout. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
16b34aa cifs: prevent starvation in wait_for_free_credits for multi-credit requests Reserve the last MAX_COMPOUND credits for any request asking for >1 credit. This is to prevent future compound requests from becoming starved while waiting for potentially many requests is there is a large number of concurrent singe-credit requests. However, we need to protect from servers that are very slow to hand out new credits on new sessions so we only do this IFF there are 2*MAX_COMPOUND (arbitrary) credits already in flight. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
b227d21 cifs: wait_for_free_credits() make it possible to wait for >=1 credits Change wait_for_free_credits() to allow waiting for >=1 credits instead of just a single credit. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
4230cff cifs: pass flags down into wait_for_free_credits() Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
480b1cb cifs: change wait_for_free_request() to take flags as argument and compute timeout and optyp from it. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 15 March 2019, 00:32:35 UTC
a039480 tracing/probe: Verify alloc_trace_*probe() result Since alloc_trace_*probe() returns -EINVAL only if !event && !group, it should not happen in trace_*probe_create(). If we catch that case there is a bug. So use WARN_ON_ONCE() instead of pr_info(). Link: http://lkml.kernel.org/r/155253785078.14922.16902223633734601469.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 14 March 2019, 23:54:21 UTC
5b7a962 tracing/probe: Check event/group naming rule at parsing Check event and group naming rule at parsing it instead of allocating probes. Link: http://lkml.kernel.org/r/155253784064.14922.2336893061156236237.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 14 March 2019, 23:54:11 UTC
b4443c1 tracing/probe: Check the size of argument name and body Check the size of argument name and expression is not 0 and smaller than maximum length. Link: http://lkml.kernel.org/r/155253783029.14922.12650939303827581096.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 14 March 2019, 23:53:57 UTC
dec65d7 tracing/probe: Check event name length correctly Ensure given name of event is not too long when parsing it, and fix to update event name offset correctly when the group name is given. For example, this makes probe event to check the "p:foo/" error case correctly. Link: http://lkml.kernel.org/r/155253782046.14922.14724124823730168629.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 14 March 2019, 23:53:47 UTC
287c038 tracing/probe: Check maxactive error cases Check maxactive on kprobe error case, because maxactive is only for kretprobe, not for kprobe. Also, maxactive should not be 0, it should be at least 1. Link: http://lkml.kernel.org/r/155253780952.14922.15784129810238750331.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 14 March 2019, 23:53:29 UTC
f261c4e Merge branch 'akpm' (patches from Andrew) Merge misc patches from Andrew Morton: - a little bit more MM - a few fixups [ The "little bit more MM" is actually just one of the three patches Andrew sent for mm/filemap.c, I'm still mulling over two more of them from Josef Bacik - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/swap.h: use offsetof() instead of custom __swapoffset macro tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind zram: default to lzo-rle instead of lzo filemap: pass vm_fault to the mmap ra helpers 14 March 2019, 22:10:10 UTC
a4046c0 include/linux/swap.h: use offsetof() instead of custom __swapoffset macro Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18 Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2019, 21:36:20 UTC
1741560 tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind : selftests: proc: proc-pid-vm : ======================================== : proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed. : Aborted Because the vsyscall mapping is enabled. Read from vsyscall page to tell if vsyscall is being used. Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2 Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2019, 21:36:20 UTC
ce82f19 zram: default to lzo-rle instead of lzo lzo-rle gives higher performance and similar compression ratios to lzo. Link: http://lkml.kernel.org/r/20190205155944.16007-4-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2019, 21:36:20 UTC
2a1180f filemap: pass vm_fault to the mmap ra helpers All of the arguments to these functions come from the vmf. Cut down on the amount of arguments passed by simply passing in the vmf to these two helpers. Link: http://lkml.kernel.org/r/20181211173801.29535-3-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 March 2019, 21:36:20 UTC
3b319ee Merge tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix a couple of issues and do some cleanups on top of the previous ACPI changes for 5.1-rc1. Specifics: - Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko) - Prevent user space from getting confusing error values on failing ACPI sysfs accesses (Rafael Wysocki) - Simplify leaf node detection in the PPTT parsing code by using a new flag defined in ACPI 6.3 (Jeremy Linton) - Add missing "static" in some places in the ACPI configfs code (Andy Shevchenko) - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi)" * tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sysfs: Prevent get_status() from returning acpi_status ACPI / device_sysfs: Avoid OF modalias creation for removed device ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static ACPI: tables: Simplify PPTT leaf node detection ACPI: Documentation: Fix path for acpidbg tool 14 March 2019, 17:48:14 UTC
9352ca5 Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previously merged power management material for 5.1-rc1 with one cpupower utility update that wasn't pushed earlier due to unfortunate timing. Specifics: - Fix registration of new cpuidle governors partially broken during the 5.0 development cycle by mistake (Rafael Wysocki). - Avoid integer overflows in the menu cpuidle governor by making it discard the overflowing data points upfront (Rafael Wysocki). - Fix minor mistake in the recent update of the iowait boost computation in the intel_pstate driver (Rafael Wysocki). - Drop incorrect __init annotation from one function in the pxa2xx cpufreq driver (Arnd Bergmann). - Fix the operating performance points (OPP) framework initialization for devices in multiple power domains if only one of them is scalable (Rajendra Nayak). - Fix mistake in dev_pm_opp_set_rate() which causes it to skip updating the performance state if the new frequency is the same as the old one (Viresh Kumar). - Rework the cancellation of wakeup source timers to avoid potential issues with it and do some cleanups unlocked by that change (Viresh Kumar, Rafael Wysocki). - Clean up the code computing the active/suspended time of devices in the PM-runtime framework after recent changes (Ulf Hansson). - Make the power management infrastructure code use pr_fmt() consistently (Joe Perches). - Clean up the generic power domains (genpd) framework somewhat (Aisheng Dong). - Improve kerneldoc comments for two functions in the cpufreq core (Rafael Wysocki). - Fix typo in a PM QoS file description comment (Aisheng Dong). - Update the handling of CPU boost frequencies in the cpupower utility (Abhishek Goel)" * tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: governor: Add new governors to cpuidle_governors again cpufreq: intel_pstate: Fix up iowait_boost computation PM / OPP: Update performance state when freq == old_freq PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor OPP: Fix handling of multiple power domains PM / QoS: Fix typo in file description cpufreq: pxa2xx: remove incorrect __init annotation PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time PM: Add and use pr_fmt() cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put() cpuidle: menu: Avoid overflows when computing variance tools/power/cpupower: Display boost frequency separately 14 March 2019, 17:30:06 UTC
9bc4461 Merge tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblaze Pull Microblaze update from Michal Simek: "Simplify debugfs initialization" * tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: no need to check return value of debugfs_create functions 14 March 2019, 17:27:47 UTC
aff7b62 f2fs: set pin_file under CAP_SYS_ADMIN Android uses pin_file for uncrypt during OTA, and that should be managed by CAP_SYS_ADMIN only. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 14 March 2019, 17:20:54 UTC
f3ca4c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "More fixes in the queue: 1) Netfilter nat can erroneously register the device notifier twice, fix from Florian Westphal. 2) Use after free in nf_tables, from Pablo Neira Ayuso. 3) Parallel update of steering rule fix in mlx5 river, from Eli Britstein. 4) RX processing panic in lan743x, fix from Bryan Whitehead. 5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch. 6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein. 7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing modes, from Bryan Whitehead. 8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) pptp: dst_release sk_dst_cache in pptp_sock_destruct MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list l2tp: fix infoleak in l2tp_ip6_recvmsg() net/tls: Inform user space about send buffer availability net_sched: return correct value for *notify* functions lan743x: Fix TX Stall Issue net/mlx4_core: Fix qp mtt size calculation net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling net/mlx4_core: Fix reset flow when in command polling mode mlxsw: minimal: Initialize base_mac mlxsw: core: Prevent duplication during QSFP module initialization net: dwmac-sun8i: fix a missing check of of_get_phy_mode net: sh_eth: fix a missing check of of_get_phy_mode net: 8390: fix potential NULL pointer dereferences net: fujitsu: fix a potential NULL pointer dereference net: qlogic: fix a potential NULL pointer dereference isdn: hfcpci: fix potential NULL pointer dereference Documentation: devicetree: add a new optional property for port mac address net: rocker: fix a potential NULL pointer dereference net: qlge: fix a potential NULL pointer dereference ... 14 March 2019, 16:28:12 UTC
31ef489 Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ... 14 March 2019, 16:11:54 UTC
2f19464 Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs" * tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits) remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" remoteproc: fix rproc_check_carveout_da() returned error and comments remoteproc: fix trace buffer va initialization remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain remoteproc: add warning on resource table cast remoteproc: fix rproc_alloc_carveout() bad variable cast remoteproc: fix rproc_da_to_va in case of unallocated carveout remoteproc: correct rproc_mem_entry_init() comments remoteproc: fix recovery procedure rpmsg: virtio: change header file sort style rpmsg: virtio: allocate buffer from parent remoteproc: st: add reserved memory support remoteproc: create vdev subdevice with specific dma memory pool remoteproc: q6v5_adsp: Remove voting for lpass_aon clock dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list remoteproc: q6v5-mss: Active powerdomain for SDM845 remoteproc: q6v5-mss: Vote for rpmh power domains remoteproc: qcom: Add support for parsing fw dt bindings remoteproc: qcom_q6v5: don't auto boot remote processor remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown ... 14 March 2019, 16:00:06 UTC
dc2535b Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ... 14 March 2019, 15:46:17 UTC
0015437 scsi: aacraid: Fix performance issue on logical drives Fix performance issue where the queue depth for SmartIOC logical volumes is set to 1, and allow the usual logical volume code to be executed Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks) Cc: stable@vger.kernel.org Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 14 March 2019, 11:16:36 UTC
3a487ff scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() It used to be that "error" was set to -ENODEV at the start of the function but we shifted some code around an now "error" is set to zero for most error paths. There is a mix of direct returns and "goto out" but I changed everything to direct returns for consistency. Fixes: 56de8357049c ("scsi: lpfc: fix calls to dma_set_mask_and_coherent()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: James SmartĀ  <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 14 March 2019, 11:01:36 UTC
b6e8811 Merge branches 'acpi-tables', 'acpi-debug', 'acpi-doc' and 'acpi-misc' * acpi-tables: ACPI: tables: Simplify PPTT leaf node detection * acpi-debug: ACPI: sysfs: Prevent get_status() from returning acpi_status * acpi-doc: ACPI: Documentation: Fix path for acpidbg tool * acpi-misc: ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static 14 March 2019, 09:54:28 UTC
b444e1a Merge branches 'pm-opp' and 'pm-tools' * pm-opp: PM / OPP: Update performance state when freq == old_freq OPP: Fix handling of multiple power domains * pm-tools: tools/power/cpupower: Display boost frequency separately 14 March 2019, 09:53:22 UTC
back to top