Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
0fcfb00 Linus Torvalds 05 December 2021, 22:08:22 UTC Linux 5.16-rc4 05 December 2021, 22:08:22 UTC
268ba09 Linus Torvalds 05 December 2021, 20:58:18 UTC Merge tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Some bug and warning fixes: - Fix "make install" to use debians "installkernel" script which is now in /usr/sbin - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE file name - Fix compiler warnings by annotating parisc agp init functions with __init - Fix timekeeping on SMP machines with dual-core CPUs - Enable some more config options in the 64-bit defconfig" * tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Mark cr16 CPU clocksource unstable on all SMP machines parisc: Fix "make install" on newer debian releases parisc/agp: Annotate parisc agp init functions with __init parisc: Enable sata sil, audit and usb support on 64-bit defconfig parisc: Fix KBUILD_IMAGE for self-extracting kernel 05 December 2021, 20:58:18 UTC
9442070 Linus Torvalds 05 December 2021, 17:34:57 UTC Merge tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for a few reported issues. Included in here are: - xhci fix for a _much_ reported regression. I don't think there's a community distro that has not reported this problem yet :( - new USB quirk addition - cdns3 minor fixes - typec regression fix. All of these have been in linux-next with no reported problems, and the xhci fix has been reported by many to resolve their reported problem" * tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub xhci: Fix commad ring abort, write all 64 bits to CRCR register. 05 December 2021, 17:34:57 UTC
5163953 Linus Torvalds 05 December 2021, 17:13:20 UTC Merge tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve a number of reported problems. They include: - liteuart serial driver fixes - 8250_pci serial driver fixes for pericom devices - 8250 RTS line control fix while in RS-485 mode - tegra serial driver fix - msm_serial driver fix - pl011 serial driver new id - fsl_lpuart revert of broken change - 8250_bcm7271 serial driver fix - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1 - vgacon fix for reported problem All of these, except for the 8250_bcm7271 fix have been in linux-next with no reported problem. The 8250_bcm7271 fix was added to the tree on Friday so no chance to be linux-next yet. But it should be fine as the affected developers submitted it" * tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_bcm7271: UART errors after resuming from S2 serial: 8250_pci: rewrite pericom_do_set_divisor() serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array serial: 8250: Fix RTS modem control while in rs485 mode Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 serial: liteuart: relax compile-test dependencies serial: liteuart: fix minor-number leak on probe errors serial: liteuart: fix use-after-free and memleak on unbind serial: liteuart: Fix NULL pointer dereference in ->remove() vgacon: Propagate console boot parameters before calling `vc_resize' tty: serial: msm_serial: Deactivate RX DMA for polling support serial: pl011: Add ACPI SBSA UART match id serial: core: fix transmit-buffer reset and memleak MAINTAINERS: Add rpmsg tty driver maintainer 05 December 2021, 17:13:20 UTC
7587a4a Linus Torvalds 05 December 2021, 16:58:52 UTC Merge tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full mode runs for prolonged periods with interrupts disabled and ends up programming the next tick in the past, leading to that storm * tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/nohz: Last resort update jiffies on nohz_full IRQ entry 05 December 2021, 16:58:52 UTC
1d21376 Linus Torvalds 05 December 2021, 16:53:31 UTC Merge tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Properly init uclamp_flags of a runqueue, on first enqueuing - Fix preempt= callback return values - Correct utime/stime resource usage reporting on nohz_full to return the proper times instead of shorter ones * tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Fix rq->uclamp_max not set on first enqueue preempt/dynamic: Fix setup_preempt_mode() return value sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full 05 December 2021, 16:53:31 UTC
f5d54a4 Linus Torvalds 05 December 2021, 16:43:35 UTC Merge tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix a couple of SWAPGS fencing issues in the x86 entry code - Use the proper operand types in __{get,put}_user() to prevent truncation in SEV-ES string io - Make sure the kernel mappings are present in trampoline_pgd in order to prevent any potential accesses to unmapped memory after switching to it - Fix a trivial list corruption in objtool's pv_ops validation - Disable the clocksource watchdog for TSC on platforms which claim that the TSC is constant, doesn't stop in sleep states, CPU has TSC adjust and the number of sockets of the platform are max 2, to prevent erroneous markings of the TSC as unstable. - Make sure TSC adjust is always checked not only when going idle - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in the FPU code - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention * tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Add xenpv_restore_regs_and_return_to_usermode() x86/entry: Use the correct fence macro after swapgs in kernel CR3 x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry() x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword x86/64/mm: Map all kernel memory into trampoline_pgd objtool: Fix pv_ops noinstr validation x86/tsc: Disable clocksource watchdog for TSC on qualified platorms x86/tsc: Add a timer to make sure TSC_adjust is always checked x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog() x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define 05 December 2021, 16:43:35 UTC
90bf8d9 Linus Torvalds 05 December 2021, 16:25:33 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more kvm fixes from Paolo Bonzini: - Static analysis fix - New SEV-ES protocol for communicating invalid VMGEXIT requests - Ensure APICv is considered inactive if there is no APIC - Fix reserved bits for AMD PerfEvtSeln register * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails KVM: x86/mmu: Retry page fault if root is invalidated by memslot update KVM: VMX: Set failure code in prepare_vmcs02() KVM: ensure APICv is considered inactive if there is no APIC KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register 05 December 2021, 16:25:33 UTC
ad5b353 Tom Lendacky 02 December 2021, 18:52:05 UTC KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT exit code or exit parameters fails. The VMGEXIT instruction can be issued from userspace, even though userspace (likely) can't update the GHCB. To prevent userspace from being able to kill the guest, return an error through the GHCB when validation fails rather than terminating the guest. For cases where the GHCB can't be updated (e.g. the GHCB can't be mapped, etc.), just return back to the guest. The new error codes are documented in the lasest update to the GHCB specification. Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 December 2021, 08:02:04 UTC
a655276 Sean Christopherson 09 November 2021, 22:23:50 UTC KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so that KVM falls back to __vmalloc() if physically contiguous memory isn't available. The buffer is purely a KVM software construct, i.e. there's no need for it to be physically contiguous. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211109222350.2266045-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 December 2021, 08:02:03 UTC
75236f5 Sean Christopherson 09 November 2021, 22:23:49 UTC KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails Return appropriate error codes if setting up the GHCB scratch area for an SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM when allocating the kernel buffer could be confusing as userspace would likely suspect a guest issue. Fixes: 8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211109222350.2266045-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 December 2021, 08:02:03 UTC
79a7216 Linus Torvalds 05 December 2021, 01:22:53 UTC Merge tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fix from Darrick Wong: "Remove an unnecessary (and backwards) rename flags check that duplicates a VFS level check" * tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove incorrect ASSERT in xfs_rename 05 December 2021, 01:22:53 UTC
23b55d6 Linus Torvalds 04 December 2021, 21:43:52 UTC Merge tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Three SMB3 multichannel/fscache fixes and a DFS fix. In testing multichannel reconnect scenarios recently various problems with the cifs.ko implementation of fscache were found (e.g. incorrect initialization of fscache cookies in some cases)" * tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: avoid use of dstaddr as key for fscache client cookie cifs: add server conn_id to fscache client cookie cifs: wait for tcon resource_id before getting fscache super cifs: fix missed refcounting of ipc tcon 04 December 2021, 21:43:52 UTC
afdb4a5 Helge Deller 04 December 2021, 20:21:46 UTC parisc: Mark cr16 CPU clocksource unstable on all SMP machines In commit c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources") I assumed that CPUs on the same physical core are syncronous. While booting up the kernel on two different C8000 machines, one with a dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be wrong. The symptom was that I saw a jump in the internal clocks printed to the syslog and strange overall behaviour. On machines which have 4 cores (2 dual-cores) the problem isn't visible, because the current logic already marked the cr16 clocksource unstable in this case. This patch now marks the cr16 interval timers unstable if we have more than one CPU in the system, and it fixes this issue. Fixes: c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.15+ 04 December 2021, 20:36:04 UTC
0f9fee4 Helge Deller 04 December 2021, 20:14:40 UTC parisc: Fix "make install" on newer debian releases On newer debian releases the debian-provided "installkernel" script is installed in /usr/sbin. Fix the kernel install.sh script to look for the script in this directory as well. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v3.13+ 04 December 2021, 20:36:04 UTC
bbef3c7 Linus Torvalds 04 December 2021, 16:38:25 UTC Merge tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block Pull block fix from Jens Axboe: "A single fix for repeated printk spam from loop" * tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block: loop: Use pr_warn_once() for loop_control_remove() warning 04 December 2021, 16:38:25 UTC
8b9a022 Linus Torvalds 04 December 2021, 16:34:59 UTC Merge tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block Pull io_uring fix from Jens Axboe: "Just a single fix preventing repeated retries of task_work based io-wq thread creation, fixing a regression from when io-wq was made more (a bit too much) resilient against signals" * tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block: io-wq: don't retry task_work creation failure on fatal conditions 04 December 2021, 16:34:59 UTC
e3b8bb4 Linus Torvalds 04 December 2021, 16:28:42 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two patches, both in drivers. One is a fix to FC recovery (lpfc) and the other is an enhancement to support the Intel Alder Motherboard with the UFS driver which comes under the -rc exception process for hardware enabling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-pci: Add support for Intel ADL scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO 04 December 2021, 16:28:42 UTC
5c623c3 Linus Torvalds 04 December 2021, 16:13:20 UTC Merge tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: - Since commit 486408d690e1 ("gfs2: Cancel remote delete work asynchronously"), inode create and lookup-by-number can overlap more easily and we can end up with temporary duplicate inodes. Fix the code to prevent that. - Fix a BUG demoting weak glock holders from a remote node. * tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_create_inode rework gfs2: gfs2_inode_lookup rework gfs2: gfs2_inode_lookup cleanup gfs2: Fix remote demote of weak glock holders 04 December 2021, 16:13:20 UTC
315c4f8 Qais Yousef 02 December 2021, 11:20:33 UTC sched/uclamp: Fix rq->uclamp_max not set on first enqueue Commit d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to match the woken up task's uclamp_max when the rq is idle. The code was relying on rq->uclamp_max initialized to zero, so on first enqueue static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p, enum uclamp_id clamp_id) { ... if (uc_se->value > READ_ONCE(uc_rq->value)) WRITE_ONCE(uc_rq->value, uc_se->value); } was actually resetting it. But since commit d81ae8aac85c changed the default to 1024, this no longer works. And since rq->uclamp_flags is also initialized to 0, neither above code path nor uclamp_idle_reset() update the rq->uclamp_max on first wake up from idle. This is only visible from first wake up(s) until the first dequeue to idle after enabling the static key. And it only matters if the uclamp_max of this task is < 1024 since only then its uclamp_max will be effectively ignored. Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to ensure uclamp_idle_reset() is called which then will update the rq uclamp_max value as expected. Fixes: d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq") Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com 04 December 2021, 09:56:18 UTC
9ed20ba Andrew Halaney 03 December 2021, 23:32:03 UTC preempt/dynamic: Fix setup_preempt_mode() return value __setup() callbacks expect 1 for success and 0 for failure. Correct the usage here to reflect that. Fixes: 826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com 04 December 2021, 09:56:18 UTC
12119cf Linus Torvalds 03 December 2021, 20:27:08 UTC Merge tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio Pull VFIO fixes from Alex Williamson: - Fix OpRegion pointer arithmetic (Zhenyu Wang) - Fix comment format triggering kernel-doc warnings (Randy Dunlap) * tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix OpRegion read vfio: remove all kernel-doc notation 03 December 2021, 20:27:08 UTC
4ec6afd Linus Torvalds 03 December 2021, 20:22:56 UTC Merge tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a CPU hot-add issue in the cpufreq core, fix a comment in the cpufreq core code and update its documentation, and disable the DTPM (Dynamic Thermal Power Management) code for the time being to prevent it from causing issues to appear. Specifics: - Disable DTPM for this cycle to prevent it from causing issues to appear on otherwise functional systems (Daniel Lezcano) - Fix cpufreq sysfs interface failure related to physical CPU hot-add (Xiongfeng Wang) - Fix comment in cpufreq core and update its documentation (Tang Yizhou)" * tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: DTPM: Drop unused local variable from init_dtpm() cpufreq: docs: Update core.rst cpufreq: Fix a comment in cpufreq_policy_free powercap/drivers/dtpm: Disable DTPM at boot time cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink() 03 December 2021, 20:22:56 UTC
757f3e6 Linus Torvalds 03 December 2021, 19:46:20 UTC Merge tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix potential overlap of pseudo-MMIO addresses with MIO addresses - Fix stack unwinder test case inline assembly compile error that happens with LLVM's integrated assembler - Update defconfigs * tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390/pci: move pseudo-MMIO to prevent MIO overlap s390/test_unwind: use raw opcode instead of invalid instruction 03 December 2021, 19:46:20 UTC
a2aeaea Linus Torvalds 03 December 2021, 18:50:14 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc4. One of them is just a trivial documentation fix, whereas the other two address a warning in the kexec code and a crash in ftrace on systems implementing BTI. The latter patch has a couple of ugly ifdefs which Mark plans to clean up separately, but as-is the patch is straightforward for backporting to stable kernels. Summary: - Add missing BTI landing instructions to the ftrace*_caller trampolines - Fix kexec() WARN when DEBUG_VIRTUAL is enabled - Fix PAC documentation by removing stale references to compiler flags" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ftrace: add missing BTIs arm64: kexec: use __pa_symbol(empty_zero_page) arm64: update PAC description for kernel 03 December 2021, 18:50:14 UTC
f66062c Linus Torvalds 03 December 2021, 18:44:16 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has another set of driver bugfixes, mostly for the stm32f7 driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rk3x: Handle a spurious start completion interrupt flag i2c: stm32f7: use proper DMAENGINE API for termination i2c: stm32f7: stop dma transfer in case of NACK i2c: stm32f7: recover the bus on access timeout i2c: stm32f7: flush TX FIFO upon transfer errors i2c: cbus-gpio: set atomic transfer callback 03 December 2021, 18:44:16 UTC
a44f27e Linus Torvalds 03 December 2021, 18:38:45 UTC Merge tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fixes from Damien Le Moal: "Two sparse warning fixes and a couple of patches to fix an issue with sata_fsl driver module removal: - A couple of patches to avoid sparse warnings in libata-sata and in the pata_falcon driver (from Yang and Finn). - A couple of sata_fsl driver patches fixing IRQ free and proc unregister on module removal (from Baokun)" * tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: replace snprintf in show functions with sysfs_emit sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl pata_falcon: Avoid type warnings from sparse 03 December 2021, 18:38:45 UTC
bbb9db5 Shyam Prasad N 02 December 2021, 07:46:54 UTC cifs: avoid use of dstaddr as key for fscache client cookie server->dstaddr can change when the DNS mapping for the server hostname changes. But conn_id is a u64 counter that is incremented each time a new TCP connection is setup. So use only that as a key. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 03 December 2021, 18:38:25 UTC
2adc820 Shyam Prasad N 02 December 2021, 07:30:00 UTC cifs: add server conn_id to fscache client cookie The fscache client cookie uses the server address (and port) as the cookie key. This is a problem when nosharesock is used. Two different connections will use duplicate cookies. Avoid this by adding server->conn_id to the key, so that it's guaranteed that cookie will not be duplicated. Also, for secondary channels of a session, copy the fscache pointer from the primary channel. The primary channel is guaranteed not to go away as long as secondary channels are in use. Also addresses minor problem found by kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 03 December 2021, 18:36:04 UTC
5bf91ef Shyam Prasad N 02 December 2021, 07:14:42 UTC cifs: wait for tcon resource_id before getting fscache super The logic for initializing tcon->resource_id is done inside cifs_root_iget. fscache super cookie relies on this for aux data. So we need to push the fscache initialization to this later point during mount. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 03 December 2021, 18:29:59 UTC
65de262 Paulo Alcantara 02 December 2021, 18:29:35 UTC cifs: fix missed refcounting of ipc tcon Fix missed refcounting of IPC tcon used for getting domain-based DFS root referrals. We want to keep it alive as long as mount is active and can be refreshed. For standalone DFS root referrals it wouldn't be a problem as the client ends up having an IPC tcon for both mount and cache. Fixes: c88f7dcd6d64 ("cifs: support nested dfs links over reconnect") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> 03 December 2021, 18:29:10 UTC
5c8f6a2 Lai Jiangshan 26 November 2021, 10:11:23 UTC x86/xen: Add xenpv_restore_regs_and_return_to_usermode() In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the trampoline stack. But XEN pv doesn't use trampoline stack, so PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack. In that case, source and destination stacks are identical, which means that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv would cause %rsp to move up to the top of the kernel stack and leave the IRET frame below %rsp. This is dangerous as it can be corrupted if #NMI / #MC hit as either of these events occurring in the middle of the stack pushing would clobber data on the (original) stack. And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing the IRET frame on to the original address is useless and error-prone when there is any future attempt to modify the code. [ bp: Massage commit message. ] Fixes: 7f2590a110b8 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com 03 December 2021, 18:21:15 UTC
1367afa Lai Jiangshan 26 November 2021, 10:11:22 UTC x86/entry: Use the correct fence macro after swapgs in kernel CR3 The commit c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching") removed a CR3 write in the faulting path of load_gs_index(). But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is enabled, see spectre_v1_select_mitigation(). Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3 and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make sure speculation is blocked. [ bp: Massage commit message and comment. ] Fixes: c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com 03 December 2021, 18:13:53 UTC
054aa8d Linus Torvalds 01 December 2021, 18:06:14 UTC fget: check that the fd still exists after getting a ref to it Jann Horn points out that there is another possible race wrt Unix domain socket garbage collection, somewhat reminiscent of the one fixed in commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). See the extended comment about the garbage collection requirements added to unix_peek_fds() by that commit for details. The race comes from how we can locklessly look up a file descriptor just as it is in the process of being closed, and with the right artificial timing (Jann added a few strategic 'mdelay(500)' calls to do that), the Unix domain socket garbage collector could see the reference count decrement of the close() happen before fget() took its reference to the file and the file was attached onto a new file descriptor. This is all (intentionally) correct on the 'struct file *' side, with RCU lookups and lockless reference counting very much part of the design. Getting that reference count out of order isn't a problem per se. But the garbage collector can get confused by seeing this situation of having seen a file not having any remaining external references and then seeing it being attached to an fd. In commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the fix was to serialize the file descriptor install with the garbage collector by taking and releasing the unix_gc_lock. That's not really an option here, but since this all happens when we are in the process of looking up a file descriptor, we can instead simply just re-check that the file hasn't been closed in the meantime, and just re-do the lookup if we raced with a concurrent close() of the same file descriptor. Reported-and-tested-by: Jann Horn <jannh@google.com> Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 December 2021, 18:06:58 UTC
c07e455 Lai Jiangshan 26 November 2021, 10:11:21 UTC x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry() Commit 18ec54fdd6d18 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both branches. This is because the fence is required for both cases since the CR3 write is conditional even when PTI is enabled. But 96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry") changed the order of SWAPGS and the CR3 write. And it missed the needed FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case. Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY can cover both branches. [ bp: Massage, fix typos, remove obsolete comment while at it. ] Fixes: 96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com 03 December 2021, 17:55:47 UTC
404c912 Rafael J. Wysocki 03 December 2021, 17:09:32 UTC Merge branch 'powercap' Merge DTPM fixes for 5.16-rc4. * powercap: powercap: DTPM: Drop unused local variable from init_dtpm() powercap/drivers/dtpm: Disable DTPM at boot time 03 December 2021, 17:09:32 UTC
1d5379d Michael Sterritt 19 November 2021, 23:27:57 UTC x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword Properly type the operands being passed to __put_user()/__get_user(). Otherwise, these routines truncate data for dependent instructions (e.g., INSW) and only read/write one byte. This has been tested by sending a string with REP OUTSW to a port and then reading it back in with REP INSW on the same port. Previous behavior was to only send and receive the first char of the size. For example, word operations for "abcd" would only read/write "ac". With change, the full string is now written and read back. Fixes: f980f9c31a923 (x86/sev-es: Compile early handler code into kernel image) Signed-off-by: Michael Sterritt <sterritt@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Peter Gonda <pgonda@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com 03 December 2021, 17:09:30 UTC
1ac5e21 Rafael J. Wysocki 03 December 2021, 16:51:59 UTC powercap: DTPM: Drop unused local variable from init_dtpm() The dtpm_descr variable in init_dtpm() is not used after commit f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"), so drop it. Fixes: f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 03 December 2021, 16:51:59 UTC
a226abc Jens Axboe 03 December 2021, 02:40:15 UTC io-wq: don't retry task_work creation failure on fatal conditions We don't want to be retrying task_work creation failure if there's an actual signal pending for the parent task. If we do, then we can enter an infinite loop of perpetually retrying and each retry failing with -ERESTARTNOINTR because a signal is pending. Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals") Reported-by: Florian Fischer <florian.fl.fischer@fau.de> Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/ Tested-by: Florian Fischer <florian.fl.fischer@fau.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 03 December 2021, 13:27:32 UTC
9cabe26 Al Cooper 01 December 2021, 20:14:02 UTC serial: 8250_bcm7271: UART errors after resuming from S2 There is a small window in time during resume where the hardware flow control signal RTS can be asserted (which allows a sender to resume sending data to the UART) but the baud rate has not yet been restored. This will cause corrupted data and FRAMING, OVERRUN and BREAK errors. This is happening because the MCTRL register is shadowed in uart_port struct and is later used during resume to set the MCTRL register during both serial8250_do_startup() and uart_resume_port(). Unfortunately, serial8250_do_startup() happens before the UART baud rate is restored. The fix is to clear the shadowed mctrl value at the end of suspend and restore it at the end of resume. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 03 December 2021, 13:14:49 UTC
37307f7 Zhou Qingyang 30 November 2021, 17:27:00 UTC usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@vger.kernel.org> Acked-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 03 December 2021, 12:57:45 UTC
387c2b6 Frank Li 30 November 2021, 15:42:39 UTC usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests This issue was found at android12 MTP. 1. MTP submit many out urb request. 2. Cancel left requests (>20) when enough data get from host 3. Send ACK by IN endpoint. 4. MTP submit new out urb request. 5. 4's urb never complete. TRACE LOG: MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0 MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0 .... MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414 .... irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0 irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0 irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184 Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong. The TRB link is below when irq happen. DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). Original code check LINK TRB, but DEQ just move one step. LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). This patch skip all LINK TRB and sync DEQ to trb's start. LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR). Acked-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 03 December 2021, 12:57:22 UTC
fbcd13d Badhri Jagan Sridharan 30 November 2021, 00:18:25 UTC usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 03 December 2021, 12:57:10 UTC
d2a0040 Ole Ernst 27 November 2021, 09:05:45 UTC USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <olebowle@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 03 December 2021, 12:56:54 UTC
09f736a Mathias Nyman 26 November 2021, 12:23:40 UTC xhci: Fix commad ring abort, write all 64 bits to CRCR register. Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: stable@vger.kernel.org Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 03 December 2021, 12:56:33 UTC
51523ed Joerg Roedel 02 December 2021, 15:32:26 UTC x86/64/mm: Map all kernel memory into trampoline_pgd The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff range of kernel memory (with 4-level paging). This range contains the kernel's text+data+bss mappings and the module mapping space but not the direct mapping and the vmalloc area. This is enough to get the application processors out of real-mode, but for code that switches back to real-mode the trampoline_pgd is missing important parts of the address space. For example, consider this code from arch/x86/kernel/reboot.c, function machine_real_restart() for a 64-bit kernel: #ifdef CONFIG_X86_32 load_cr3(initial_page_table); #else write_cr3(real_mode_header->trampoline_pgd); /* Exiting long mode will fail if CR4.PCIDE is set. */ if (boot_cpu_has(X86_FEATURE_PCID)) cr4_clear_bits(X86_CR4_PCIDE); #endif /* Jump to the identity-mapped low memory code */ #ifdef CONFIG_X86_32 asm volatile("jmpl *%0" : : "rm" (real_mode_header->machine_real_restart_asm), "a" (type)); #else asm volatile("ljmpl *%0" : : "m" (real_mode_header->machine_real_restart_asm), "D" (type)); #endif The code switches to the trampoline_pgd, which unmaps the direct mapping and also the kernel stack. The call to cr4_clear_bits() will find no stack and crash the machine. The real_mode_header pointer below points into the direct mapping, and dereferencing it also causes a crash. The reason this does not crash always is only that kernel mappings are global and the CR3 switch does not flush those mappings. But if theses mappings are not in the TLB already, the above code will crash before it can jump to the real-mode stub. Extend the trampoline_pgd to contain all kernel mappings to prevent these crashes and to make code which runs on this page-table more robust. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org 03 December 2021, 08:11:43 UTC
988f016 Peter Zijlstra 02 December 2021, 20:45:34 UTC objtool: Fix pv_ops noinstr validation Boris reported that in one of his randconfig builds, objtool got infinitely stuck. Turns out there's trivial list corruption in the pv_ops tracking when a function is both in a static table and in a code assignment. Avoid re-adding function to the pv_ops[] lists when they're already on it. Fixes: db2b0c5d7b6f ("objtool: Support pv_opsindirect calls for noinstr") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20211202204534.GA16608@worktop.programming.kicks-ass.net 03 December 2021, 08:11:42 UTC
5f58da2 Linus Torvalds 02 December 2021, 22:38:54 UTC Merge tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Bit of an uptick in patch count this week, though it's all relatively small overall. I suspect msm has been queuing up a few fixes to skew it here. Otherwise amdgpu has a scattered bunch of small fixes, and then some vc4, i915. virtio-gpu changes an rc1 introduced uAPI mistake, and makes it operate more like other drivers. This should be fine as no userspace relies on the behaviour yet. Summary: dma-buf: - memory leak fix msm: - kasan found memory overwrite - mmap flags - fencing error bug - ioctl NULL ptr - uninit var - devfreqless devices fix - dsi lanes fix - dp: avoid unpowered aux xfers amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free i915: - backlight regression - Intel HDR backlight detection fix - revert TGL workaround that caused hangs virtio-gpu: - switch back to drm_poll vc4: - memory leak - error check fix - HVS modesetting fixes" * tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits) Revert "drm/i915: Implement Wa_1508744258" drm/amdkfd: process_info lock not needed for svm drm/amdgpu: adjust the kfd reset sequence in reset sriov function drm/amd/display: add connector type check for CRC source set drm/amdkfd: fix double free mem structure drm/amdkfd: set "r = 0" explicitly before goto drm/amd/display: Add work around for tunneled MST. drm/amd/display: Fix for the no Audio bug with Tiled Displays drm/amd/display: Clear DPCD lane settings after repeater training drm/amd/display: Allow DSC on supported MST branch devices drm/amdgpu: Don't halt RLC on GFX suspend drm/amdgpu: fix the missed handling for SDMA2 and SDMA3 drm/amdgpu: check atomic flag to differeniate with legacy path drm/amdgpu: cancel the correct hrtimer on exit drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID drm/i915/dp: Perform 30ms delay after source OUI write dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow drm/i915: Add support for panels with VESA backlights with PWM enable/disable drm/vc4: kms: Fix previous HVS commit wait drm/vc4: kms: Don't duplicate pending commit ... 02 December 2021, 22:38:54 UTC
a687efe Dave Airlie 02 December 2021, 19:59:26 UTC Merge tag 'drm-intel-fixes-2021-12-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixing a regression where the backlight brightness control stopped working. - Fix the Intel HDR backlight support detection. - Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also for a hang, but in a much rarer scenario. The proper solution need to be done with help from user space and it will be addressed later. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yakf9hdnR5or+zNP@intel.com 02 December 2021, 19:59:31 UTC
1152b16 Dave Airlie 02 December 2021, 19:57:11 UTC Merge tag 'drm-misc-fixes-2021-12-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Switch back to drm_poll for virtio, multiple fixes (memory leak, improper error check, some functional fixes too) for vc4, memory leak fix in dma-buf, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat 02 December 2021, 19:57:19 UTC
a51e3ac Linus Torvalds 02 December 2021, 19:22:06 UTC Merge tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ... 02 December 2021, 19:22:06 UTC
2b2c0f2 Linus Torvalds 02 December 2021, 19:07:41 UTC Merge tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Three tracing fixes: - Allow compares of strings when using signed and unsigned characters - Fix kmemleak false positive for histogram entries - Handle negative numbers for user defined kretprobe data sizes" * tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kprobes: Limit max data_size of the kretprobe instances tracing: Fix a kmemleak false positive in tracing_map tracing/histograms: String compares should not care about signed values 02 December 2021, 19:07:41 UTC
df36588 Linus Torvalds 02 December 2021, 18:56:16 UTC Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi Pull IPMI fixes from Corey Minyard: "Some changes that went in 5.16 had issues. When working on the design a piece was redesigned and things got missed. And the message type was not being initialized when it was allocated, resulting in crashes. In addition, the IPMI driver has had a shutdown issue where it could still have an item in a system workqueue after it had been shutdown. Move to a private workqueue to avoid that problem" * tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi: ipmi:ipmb: Fix unknown command response ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking ipmi: fix oob access due to uninit smi_msg type ipmi: msghandler: Make symbol 'remove_work_wq' static ipmi: Move remove_work to dedicated workqueue 02 December 2021, 18:56:16 UTC
3c088b1 Heiko Carstens 26 November 2021, 14:16:31 UTC s390: update defconfigs Signed-off-by: Heiko Carstens <hca@linux.ibm.com> 02 December 2021, 18:29:44 UTC
72641d8 José Roberto de Souza 19 November 2021, 14:09:30 UTC Revert "drm/i915: Implement Wa_1508744258" This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9cbebf3feeaf21a59df9dfbc02bda3362. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145 Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 28ec02c9cbeb ("drm/i915: Implement Wa_1508744258") Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-1-jose.souza@intel.com (cherry picked from commit f3799ff16fcfacd44aee55db162830df461b631f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 02 December 2021, 14:56:34 UTC
e7f2be1 Frederic Weisbecker 26 October 2021, 14:10:55 UTC sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime than the actual time. task_cputime_adjusted() snapshots utime and stime and then adjust their sum to match the scheduler maintained cputime.sum_exec_runtime. Unfortunately in nohz_full, sum_exec_runtime is only updated once per second in the worst case, causing a discrepancy against utime and stime that can be updated anytime by the reader using vtime. To fix this situation, perform an update of cputime.sum_exec_runtime when the cputime snapshot reports the task as actually running while the tick is disabled. The related overhead is then contained within the relevant situations. Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org 02 December 2021, 14:08:22 UTC
53e87e3 Frederic Weisbecker 26 October 2021, 14:10:54 UTC timers/nohz: Last resort update jiffies on nohz_full IRQ entry When at least one CPU runs in nohz_full mode, a dedicated timekeeper CPU is guaranteed to stay online and to never stop its tick. Meanwhile on some rare case, the dedicated timekeeper may be running with interrupts disabled for a while, such as in stop_machine. If jiffies stop being updated, a nohz_full CPU may end up endlessly programming the next tick in the past, taking the last jiffies update monotonic timestamp as a stale base, resulting in an tick storm. Here is a scenario where it matters: 0) CPU 0 is the timekeeper and CPU 1 a nohz_full CPU. 1) A stop machine callback is queued to execute somewhere. 2) CPU 0 reaches MULTI_STOP_DISABLE_IRQ while CPU 1 is still in MULTI_STOP_PREPARE. Hence CPU 0 can't do its timekeeping duty. CPU 1 can still take IRQs. 3) CPU 1 receives an IRQ which queues a timer callback one jiffy forward. 4) On IRQ exit, CPU 1 schedules the tick one jiffy forward, taking last_jiffies_update as a base. But last_jiffies_update hasn't been updated for 2 jiffies since the timekeeper has interrupts disabled. 5) clockevents_program_event(), which relies on ktime_get(), observes that the expiration is in the past and therefore programs the min delta event on the clock. 6) The tick fires immediately, goto 3) 7) Tick storm, the nohz_full CPU is drown and takes ages to reach MULTI_STOP_DISABLE_IRQ, which is the only way out of this situation. Solve this with unconditionally updating jiffies if the value is stale on nohz_full IRQ entry. IRQs and other disturbances are expected to be rare enough on nohz_full for the unconditional call to ktime_get() to actually matter. Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20211026141055.57358-2-frederic@kernel.org 02 December 2021, 14:07:22 UTC
88362eb Florian Fainelli 02 December 2021, 04:17:20 UTC net: dsa: b53: Add SPI ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 13:05:17 UTC
1ebb87c Jiapeng Chong 02 December 2021, 08:30:42 UTC gro: Fix inconsistent indenting Eliminate the follow smatch warning: net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:21:11 UTC
a05431b Li Zhijian 02 December 2021, 02:28:41 UTC selftests: net: Correct case name ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test would not be run by default due to the wrong case names Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test") Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test") Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:19:08 UTC
19f36ed William Kucharski 01 December 2021, 14:45:22 UTC net/rds: correct socket tunable error in rds_tcp_tune() Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched. Fixes: c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket") Signed-off-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:16:57 UTC
76d0016 Matt Johnston 01 December 2021, 08:07:42 UTC mctp: Don't let RTM_DELROUTE delete local routes We need to test against the existing route type, not the rtm_type in the netlink request. Fixes: 83f0a0b7285b ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:15:25 UTC
00e158f Tony Lu 01 December 2021, 06:42:16 UTC net/smc: Keep smc_close_final rc during active close When smc_close_final() returns error, the return code overwrites by kernel_sock_shutdown() in smc_close_active(). The return code of smc_close_final() is more important than kernel_sock_shutdown(), and it will pass to userspace directly. Fix it by keeping both return codes, if smc_close_final() raises an error, return it or kernel_sock_shutdown()'s. Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock") Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:14:36 UTC
5b08560 Sukadev Bhattiprolu 01 December 2021, 05:48:36 UTC ibmvnic: drop bad optimization in reuse_tx_pools() When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: bbd809305bc7 ("ibmvnic: Reuse tx pools when possible") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:09:19 UTC
0584f49 Sukadev Bhattiprolu 01 December 2021, 05:48:35 UTC ibmvnic: drop bad optimization in reuse_rx_pools() When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: 489de956e7a2 ("ibmvnic: Reuse rx pools when possible") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:09:19 UTC
789b6cc Dust Li 01 December 2021, 03:02:30 UTC net/smc: fix wrong list_del in smc_lgr_cleanup_early smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [  231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [  231.278222] ------------[ cut here ]------------ [  231.278726] kernel BUG at lib/list_debug.c:53! [  231.279326] invalid opcode: 0000 [#1] SMP NOPTI [  231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [  231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [  231.281248] Workqueue: events smc_link_down_work [  231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [  231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [  231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [  231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [  231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [  231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [  231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [  231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [  231.288337] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [  231.289160] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [  231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [  231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [  231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [  231.291940] Call Trace: [  231.292211]  smc_lgr_terminate_sched+0x53/0xa0 [  231.292677]  smc_switch_conns+0x75/0x6b0 [  231.293085]  ? update_load_avg+0x1a6/0x590 [  231.293517]  ? ttwu_do_wakeup+0x17/0x150 [  231.293907]  ? update_load_avg+0x1a6/0x590 [  231.294317]  ? newidle_balance+0xca/0x3d0 [  231.294716]  smcr_link_down+0x50/0x1a0 [  231.295090]  ? __wake_up_common_lock+0x77/0x90 [  231.295534]  smc_link_down_work+0x46/0x60 [  231.295933]  process_one_work+0x18b/0x350 Fixes: a0a62ee15a829 ("net/smc: separate locks for SMCD and SMCR link group lists") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:07:46 UTC
72f6a45 Xiayu Zhang 01 December 2021, 02:57:13 UTC Fix Comment of ETH_P_802_3_MIN The description of ETH_P_802_3_MIN is misleading. The value of EthernetType in Ethernet II frame is more than 0x0600, the value of Length in 802.3 frame is less than 0x0600. Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:07:04 UTC
553217c Tianhao Chai 01 December 2021, 02:57:06 UTC ethernet: aquantia: Try MAC address from device tree Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the card, but instead need to obtain MAC addresses from the device tree. In this case the hardware will report an invalid MAC. Currently atlantic driver does not query the DT for MAC address and will randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in. This patch causes the driver to perfer a valid MAC address from OF (if present) over HW self-reported MAC and only fall back to a random MAC address when neither of them is valid. Signed-off-by: Tianhao Chai <cth451@gmail.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 12:06:03 UTC
213f5f8 Eric Dumazet 02 December 2021, 02:26:35 UTC ipv4: convert fib_num_tclassid_users to atomic_t Before commit faa041a40b9f ("ipv4: Create cleanup helper for fib_nh") changes to net->ipv4.fib_num_tclassid_users were protected by RTNL. After the change, this is no longer the case, as free_fib_info_rcu() runs after rcu grace period, without rtnl being held. Fixes: faa041a40b9f ("ipv4: Create cleanup helper for fib_nh") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 02 December 2021, 11:56:04 UTC
3d36e57 Andreas Gruenbacher 30 November 2021, 17:26:15 UTC gfs2: gfs2_create_inode rework When gfs2_lookup_by_inum() calls gfs2_inode_lookup() for an uncached inode, gfs2_inode_lookup() will place a new tentative inode into the inode cache before verifying that there is a valid inode at the given address. This can race with gfs2_create_inode() which doesn't check for duplicates inodes. gfs2_create_inode() will try to assign the new inode to the corresponding inode glock, and glock_set_object() will complain that the glock is still in use by gfs2_inode_lookup's tentative inode. We noticed this bug after adding commit 486408d690e1 ("gfs2: Cancel remote delete work asynchronously") which allowed delete_work_func() to race with gfs2_create_inode(), but the same race exists for open-by-handle. Fix that by switching from insert_inode_hash() to insert_inode_locked4(), which does check for duplicate inodes. We know we've just managed to to allocate the new inode, so an inode tentatively created by gfs2_inode_lookup() will eventually go away and insert_inode_locked4() will always succeed. In addition, don't flush the inode glock work anymore (this can now only make things worse) and clean up glock_{set,clear}_object for the inode glock somewhat. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 02 December 2021, 11:41:10 UTC
5f6e13b Andreas Gruenbacher 29 November 2021, 09:50:41 UTC gfs2: gfs2_inode_lookup rework Rework gfs2_inode_lookup() to only set up the new inode's glocks after verifying that the new inode is valid. There is no need for flushing the inode glock work queue anymore now, so remove that as well. While at it, get rid of the useless wrapper around iget5_locked() and its unnecessary is_bad_inode() check. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 02 December 2021, 11:41:09 UTC
b8e12e3 Andreas Gruenbacher 29 November 2021, 02:35:00 UTC gfs2: gfs2_inode_lookup cleanup In gfs2_inode_lookup, once the inode has been looked up, we check if the inode generation (no_formal_ino) is the one we're looking for. If it isn't and the inode wasn't in the inode cache, we discard the newly looked up inode. This is unnecessary, complicates the code, and makes future changes to gfs2_inode_lookup harder, so change the code to retain newly looked up inodes instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 02 December 2021, 11:41:09 UTC
e11b02d Andreas Gruenbacher 22 November 2021, 16:32:35 UTC gfs2: Fix remote demote of weak glock holders When we mock up a temporary holder in gfs2_glock_cb to demote weak holders in response to a remote locking conflict, we don't set the HIF_HOLDER flag. This causes function may_grant to BUG. Fix by setting the missing HIF_HOLDER flag in the mock glock holder. In addition, define the mock glock holder where it is used. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 02 December 2021, 11:41:09 UTC
35b6b28 Mark Rutland 29 November 2021, 13:57:09 UTC arm64: ftrace: add missing BTIs When branch target identifiers are in use, code reachable via an indirect branch requires a BTI landing pad at the branch target site. When building FTRACE_WITH_REGS atop patchable-function-entry, we miss BTIs at the start start of the `ftrace_caller` and `ftrace_regs_caller` trampolines, and when these are called from a module via a PLT (which will use a `BR X16`), we will encounter a BTI failure, e.g. | # insmod lkdtm.ko | lkdtm: No crash points registered, enable through debugfs | # echo function_graph > /sys/kernel/debug/tracing/current_tracer | # cat /sys/kernel/debug/provoke-crash/DIRECT | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x34000001 -- BTI | CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3 | Hardware name: linux,dummy-virt (DT) | pstate: 60400405 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=jc) | pc : ftrace_caller+0x0/0x3c | lr : lkdtm_debugfs_open+0xc/0x20 [lkdtm] | sp : ffff800012e43b00 | x29: ffff800012e43b00 x28: 0000000000000000 x27: ffff800012e43c88 | x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000c171f200 | x23: ffff0000c27b1e00 x22: ffff0000c2265240 x21: ffff0000c23c8c30 | x20: ffff8000090ba380 x19: 0000000000000000 x18: 0000000000000000 | x17: 0000000000000000 x16: ffff80001002bb4c x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000900ff0 | x11: ffff0000c4166310 x10: ffff800012e43b00 x9 : ffff8000104f2384 | x8 : 0000000000000001 x7 : 0000000000000000 x6 : 000000000000003f | x5 : 0000000000000040 x4 : ffff800012e43af0 x3 : 0000000000000001 | x2 : ffff8000090b0000 x1 : ffff0000c171f200 x0 : ffff0000c23c8c30 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x1a4 | show_stack+0x24/0x30 | dump_stack_lvl+0x68/0x84 | dump_stack+0x1c/0x38 | panic+0x168/0x360 | arm64_exit_nmi.isra.0+0x0/0x80 | el1h_64_sync_handler+0x68/0xd4 | el1h_64_sync+0x78/0x7c | ftrace_caller+0x0/0x3c | do_dentry_open+0x134/0x3b0 | vfs_open+0x38/0x44 | path_openat+0x89c/0xe40 | do_filp_open+0x8c/0x13c | do_sys_openat2+0xbc/0x174 | __arm64_sys_openat+0x6c/0xbc | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x84/0xa0 | el0_svc+0x28/0x80 | el0t_64_sync_handler+0xa8/0x130 | el0t_64_sync+0x1a0/0x1a4 | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x0,00000f42,da660c5f | Memory Limit: none | ---[ end Kernel panic - not syncing: Unhandled exception ]--- Fix this by adding the required `BTI C`, as we only require these to be reachable via BL for direct calls or BR X16/X17 for PLTs. For now, these are open-coded in the function prologue, matching the style of the `__hwasan_tag_mismatch` trampoline. In future we may wish to consider adding a new SYM_CODE_START_*() variant which has an implicit BTI. When ftrace is built atop mcount, the trampolines are marked with SYM_FUNC_START(), and so get an implicit BTI. We may need to change these over to SYM_CODE_START() in future for RELIABLE_STACKTRACE, in case we need to apply special care aroud the return address being rewritten. Fixes: 97fed779f2a6 ("arm64: bti: Provide Kconfig for kernel mode BTI") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211129135709.2274019-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> 02 December 2021, 10:18:32 UTC
2f21832 Mark Rutland 30 November 2021, 12:18:49 UTC arm64: kexec: use __pa_symbol(empty_zero_page) In machine_kexec_post_load() we use __pa() on `empty_zero_page`, so that we can use the physical address during arm64_relocate_new_kernel() to switch TTBR1 to a new set of tables. While `empty_zero_page` is part of the old kernel, we won't clobber it until after this switch, so using it is benign. However, `empty_zero_page` is part of the kernel image rather than a linear map address, so it is not correct to use __pa(x), and we should instead use __pa_symbol(x) or __pa(lm_alias(x)). Otherwise, when the kernel is built with DEBUG_VIRTUAL, we'll encounter splats as below, as I've seen when fuzzing v5.16-rc3 with Syzkaller: | ------------[ cut here ]------------ | virt_to_phys used for non-linear address: 000000008492561a (empty_zero_page+0x0/0x1000) | WARNING: CPU: 3 PID: 11492 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | CPU: 3 PID: 11492 Comm: syz-executor.0 Not tainted 5.16.0-rc3-00001-g48bd452a045c #1 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | lr : __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | sp : ffff80001af17bb0 | x29: ffff80001af17bb0 x28: ffff1cc65207b400 x27: ffffb7828730b120 | x26: 0000000000000e11 x25: 0000000000000000 x24: 0000000000000001 | x23: ffffb7828963e000 x22: ffffb78289644000 x21: 0000600000000000 | x20: 000000000000002d x19: 0000b78289644000 x18: 0000000000000000 | x17: 74706d6528206131 x16: 3635323934383030 x15: 303030303030203a | x14: 1ffff000035e2eb8 x13: ffff6398d53f4f0f x12: 1fffe398d53f4f0e | x11: 1fffe398d53f4f0e x10: ffff6398d53f4f0e x9 : ffffb7827c6f76dc | x8 : ffff1cc6a9fa7877 x7 : 0000000000000001 x6 : ffff6398d53f4f0f | x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff1cc66f2a99c0 | x2 : 0000000000040000 x1 : d7ce7775b09b5d00 x0 : 0000000000000000 | Call trace: | __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | machine_kexec_post_load+0x284/0x670 arch/arm64/kernel/machine_kexec.c:150 | do_kexec_load+0x570/0x670 kernel/kexec.c:155 | __do_sys_kexec_load kernel/kexec.c:250 [inline] | __se_sys_kexec_load kernel/kexec.c:231 [inline] | __arm64_sys_kexec_load+0x1d8/0x268 kernel/kexec.c:231 | __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] | invoke_syscall+0x90/0x2e0 arch/arm64/kernel/syscall.c:52 | el0_svc_common.constprop.2+0x1e4/0x2f8 arch/arm64/kernel/syscall.c:142 | do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:181 | el0_svc+0x60/0x248 arch/arm64/kernel/entry-common.c:603 | el0t_64_sync_handler+0x90/0xb8 arch/arm64/kernel/entry-common.c:621 | el0t_64_sync+0x180/0x184 arch/arm64/kernel/entry.S:572 | irq event stamp: 2428 | hardirqs last enabled at (2427): [<ffffb7827c6f2308>] __up_console_sem+0xf0/0x118 kernel/printk/printk.c:255 | hardirqs last disabled at (2428): [<ffffb7828223df98>] el1_dbg+0x28/0x80 arch/arm64/kernel/entry-common.c:375 | softirqs last enabled at (2424): [<ffffb7827c411c00>] softirq_handle_end kernel/softirq.c:401 [inline] | softirqs last enabled at (2424): [<ffffb7827c411c00>] __do_softirq+0xa28/0x11e4 kernel/softirq.c:587 | softirqs last disabled at (2417): [<ffffb7827c59015c>] do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline] | softirqs last disabled at (2417): [<ffffb7827c59015c>] invoke_softirq kernel/softirq.c:439 [inline] | softirqs last disabled at (2417): [<ffffb7827c59015c>] __irq_exit_rcu kernel/softirq.c:636 [inline] | softirqs last disabled at (2417): [<ffffb7827c59015c>] irq_exit_rcu+0x53c/0x688 kernel/softirq.c:648 | ---[ end trace 0ca578534e7ca938 ]--- With or without DEBUG_VIRTUAL __pa() will fall back to __kimg_to_phys() for non-linear addresses, and will happen to do the right thing in this case, even with the warning. But we should not depend upon this, and to keep the warning useful we should fix this case. Fix this issue by using __pa_symbol(), which handles kernel image addresses (and checks its input is a kernel image address). This matches what we do elsewhere, e.g. in arch/arm64/include/asm/pgtable.h: | #define ZERO_PAGE(vaddr) phys_to_page(__pa_symbol(empty_zero_page)) Fixes: 3744b5280e67 ("arm64: kexec: install a copy of the linear-map") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Link: https://lore.kernel.org/r/20211130121849.3319010-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> 02 December 2021, 10:17:12 UTC
ce39d47 Kuan-Ying Lee 01 December 2021, 03:40:10 UTC arm64: update PAC description for kernel Remove the paragraph which has nothing to do with the kernel and add PAC description related to kernel. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Link: https://lore.kernel.org/r/20211201034014.20048-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Will Deacon <will@kernel.org> 02 December 2021, 10:13:35 UTC
a955cad Sean Christopherson 20 November 2021, 04:50:22 UTC KVM: x86/mmu: Retry page fault if root is invalidated by memslot update Bail from the page fault handler if the root shadow page was obsoleted by a memslot update. Do the check _after_ acuiring mmu_lock, as the TDP MMU doesn't rely on the memslot/MMU generation, and instead relies on the root being explicit marked invalid by kvm_mmu_zap_all_fast(), which takes mmu_lock for write. For the TDP MMU, inserting a SPTE into an obsolete root can leak a SP if kvm_tdp_mmu_zap_invalidated_roots() has already zapped the SP, i.e. has moved past the gfn associated with the SP. For other MMUs, the resulting behavior is far more convoluted, though unlikely to be truly problematic. Installing SPs/SPTEs into the obsolete root isn't directly problematic, as the obsolete root will be unloaded and dropped before the vCPU re-enters the guest. But because the legacy MMU tracks shadow pages by their role, any SP created by the fault can can be reused in the new post-reload root. Again, that _shouldn't_ be problematic as any leaf child SPTEs will be created for the current/valid memslot generation, and kvm_mmu_get_page() will not reuse child SPs from the old generation as they will be flagged as obsolete. But, given that continuing with the fault is pointess (the root will be unloaded), apply the check to all MMUs. Fixes: b7cccd397f31 ("KVM: x86/mmu: Fast invalidation for TDP MMU") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211120045046.3940942-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 02 December 2021, 09:12:12 UTC
bfbb307 Dan Carpenter 30 November 2021, 12:53:37 UTC KVM: VMX: Set failure code in prepare_vmcs02() The error paths in the prepare_vmcs02() function are supposed to set *entry_failure_code but this path does not. It leads to using an uninitialized variable in the caller. Fixes: 71f7347025bf ("KVM: nVMX: Load GUEST_IA32_PERF_GLOBAL_CTRL MSR on VM-Entry") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20211130125337.GB24578@kili> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 02 December 2021, 09:12:11 UTC
ef8b4b7 Paolo Bonzini 30 November 2021, 12:37:45 UTC KVM: ensure APICv is considered inactive if there is no APIC kvm_vcpu_apicv_active() returns false if a virtual machine has no in-kernel local APIC, however kvm_apicv_activated might still be true if there are no reasons to disable APICv; in fact it is quite likely that there is none because APICv is inhibited by specific configurations of the local APIC and those configurations cannot be programmed. This triggers a WARN: WARN_ON_ONCE(kvm_apicv_activated(vcpu->kvm) != kvm_vcpu_apicv_active(vcpu)); To avoid this, introduce another cause for APICv inhibition, namely the absence of an in-kernel local APIC. This cause is enabled by default, and is dropped by either KVM_CREATE_IRQCHIP or the enabling of KVM_CAP_IRQCHIP_SPLIT. Reported-by: Ignat Korchagin <ignat@cloudflare.com> Fixes: ee49a8932971 ("KVM: x86: Move SVM's APICv sanity check to common x86", 2021-10-22) Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Ignat Korchagin <ignat@cloudflare.com> Message-Id: <20211130123746.293379-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 02 December 2021, 09:12:11 UTC
cb1d220 Like Xu 18 November 2021, 13:03:20 UTC KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register If we run the following perf command in an AMD Milan guest: perf stat \ -e cpu/event=0x1d0/ \ -e cpu/event=0x1c7/ \ -e cpu/umask=0x1f,event=0x18e/ \ -e cpu/umask=0x7,event=0x18e/ \ -e cpu/umask=0x18,event=0x18e/ \ ./workload dmesg will report a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx. This is because according to APM (Revision: 4.03) Figure 13-7, the bits [35:32] of AMD PerfEvtSeln register is a part of the event select encoding, which extends the EVENT_SELECT field from 8 bits to 12 bits. Opportunistically update pmu->reserved_bits for reserved bit 19. Reported-by: Jim Mattson <jmattson@google.com> Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20211118130320.95997-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 02 December 2021, 09:11:50 UTC
06d5d55 Yang Guang 30 November 2021, 00:04:11 UTC ata: replace snprintf in show functions with sysfs_emit coccinelle report： ./drivers/ata/libata-sata.c:830:8-16: WARNING: use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> 02 December 2021, 04:13:45 UTC
a37a0ee Eric Dumazet 30 November 2021, 18:29:39 UTC net: avoid uninit-value from tcp_conn_request A recent change triggers a KMSAN warning, because request sockets do not initialize @sk_rx_queue_mapping field. Add sk_rx_queue_update() helper to make our intent clear. BUG: KMSAN: uninit-value in sk_rx_queue_set include/net/sock.h:1922 [inline] BUG: KMSAN: uninit-value in tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922 sk_rx_queue_set include/net/sock.h:1922 [inline] tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922 tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528 tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406 tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738 tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 invoke_softirq+0xa4/0x130 kernel/softirq.c:432 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x76/0x130 kernel/softirq.c:648 common_interrupt+0xb6/0xd0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 smap_restore arch/x86/include/asm/smap.h:67 [inline] get_shadow_origin_ptr mm/kmsan/instrumentation.c:31 [inline] __msan_metadata_ptr_for_load_1+0x28/0x30 mm/kmsan/instrumentation.c:63 tomoyo_check_acl+0x1b0/0x630 security/tomoyo/domain.c:173 tomoyo_path_permission security/tomoyo/file.c:586 [inline] tomoyo_check_open_permission+0x61f/0xe10 security/tomoyo/file.c:777 tomoyo_file_open+0x24f/0x2d0 security/tomoyo/tomoyo.c:311 security_file_open+0xb1/0x1f0 security/security.c:1635 do_dentry_open+0x4e4/0x1bf0 fs/open.c:809 vfs_open+0xaf/0xe0 fs/open.c:957 do_open fs/namei.c:3426 [inline] path_openat+0x52f1/0x5dd0 fs/namei.c:3559 do_filp_open+0x306/0x760 fs/namei.c:3586 do_sys_openat2+0x263/0x8f0 fs/open.c:1212 do_sys_open fs/open.c:1228 [inline] __do_sys_open fs/open.c:1236 [inline] __se_sys_open fs/open.c:1232 [inline] __x64_sys_open+0x314/0x380 fs/open.c:1232 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: __alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409 alloc_pages+0x8a5/0xb80 alloc_slab_page mm/slub.c:1810 [inline] allocate_slab+0x287/0x1c20 mm/slub.c:1947 new_slab mm/slub.c:2010 [inline] ___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039 __slab_alloc mm/slub.c:3126 [inline] slab_alloc_node mm/slub.c:3217 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264 reqsk_alloc include/net/request_sock.h:91 [inline] inet_reqsk_alloc+0xaf/0x8b0 net/ipv4/tcp_input.c:6712 tcp_conn_request+0x910/0x4dc0 net/ipv4/tcp_input.c:6852 tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528 tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406 tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738 tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 Fixes: 342159ee394d ("net: avoid dirtying sk->sk_rx_queue_mapping") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130182939.2584764-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 December 2021, 03:15:54 UTC
7a10d8c Eric Dumazet 30 November 2021, 17:01:55 UTC net: annotate data-races on txq->xmit_lock_owner syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner without annotations. No serious issue there, let's document what is happening there. BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0: __netif_tx_unlock include/linux/netdevice.h:4437 [inline] __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_hh_output include/net/neighbour.h:511 [inline] neigh_output include/net/neighbour.h:525 [inline] ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1: __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523 neigh_output include/net/neighbour.h:527 [inline] ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443 folio_test_anon include/linux/page-flags.h:581 [inline] PageAnon include/linux/page-flags.h:586 [inline] zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347 zap_pmd_range mm/memory.c:1467 [inline] zap_pud_range mm/memory.c:1496 [inline] zap_p4d_range mm/memory.c:1517 [inline] unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538 unmap_single_vma+0x157/0x210 mm/memory.c:1583 unmap_vmas+0xd0/0x180 mm/memory.c:1615 exit_mmap+0x23d/0x470 mm/mmap.c:3170 __mmput+0x27/0x1b0 kernel/fork.c:1113 mmput+0x3d/0x50 kernel/fork.c:1134 exit_mm+0xdb/0x170 kernel/exit.c:507 do_exit+0x608/0x17a0 kernel/exit.c:819 do_group_exit+0xce/0x180 kernel/exit.c:929 get_signal+0xfc3/0x1550 kernel/signal.c:2852 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffffff Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 December 2021, 03:14:26 UTC
e07a097 Zhou Qingyang 30 November 2021, 16:50:39 UTC octeontx2-af: Fix a memleak bug in rvu_mbox_init() In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 December 2021, 03:11:05 UTC
addad76 Zhou Qingyang 30 November 2021, 16:44:38 UTC net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 December 2021, 03:04:50 UTC
ee20101 Stephen Suryaputra 30 November 2021, 16:26:37 UTC vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 December 2021, 03:03:13 UTC
e2dabc4 Zhou Qingyang 30 November 2021, 11:08:48 UTC net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 December 2021, 02:51:36 UTC
6bbfa44 Masami Hiramatsu 01 December 2021, 14:45:50 UTC kprobes: Limit max data_size of the kretprobe instances The 'kprobe::data_size' is unsigned, thus it can not be negative. But if user sets it enough big number (e.g. (size_t)-8), the result of 'data_size + sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct kretprobe_instance) or zero. In result, the kretprobe_instance are allocated without enough memory, and kretprobe accesses outside of allocated memory. To avoid this issue, introduce a max limitation of the kretprobe::data_size. 4KB per instance should be OK. Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler") Reported-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 02 December 2021, 02:04:34 UTC
f25667e Chen Jun 24 November 2021, 14:08:01 UTC tracing: Fix a kmemleak false positive in tracing_map Doing the command: echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger Triggers many kmemleak reports: unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 The reason is elts->pages[i] is alloced by get_zeroed_page. and kmemleak will not scan the area alloced by get_zeroed_page. The address stored in elts->pages will be regarded as leaked. That is, the elts->pages[i] will have pointers loaded onto it as well, and without telling kmemleak about it, those pointers will look like memory without a reference. To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i] Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.com Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 02 December 2021, 02:04:34 UTC
450fec1 Steven Rostedt (VMware) 30 November 2021, 17:31:23 UTC tracing/histograms: String compares should not care about signed values When comparing two strings for the "onmatch" histogram trigger, fields that are strings use string comparisons, which do not care about being signed or not. Do not fail to match two string fields if one is unsigned char array and the other is a signed char array. Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/ Cc: stable@vgerk.kernel.org Cc: Tom Zanussi <zanussi@kernel.org> Cc: Yafang Shao <laoar.shao@gmail.com> Fixes: b05e89ae7cf3b ("tracing: Accept different type for synthetic event fields") Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org> Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 02 December 2021, 02:04:22 UTC
e445976 Eric Sandeen 01 December 2021, 17:31:03 UTC xfs: remove incorrect ASSERT in xfs_rename This ASSERT in xfs_rename is a) incorrect, because (RENAME_WHITEOUT|RENAME_NOREPLACE) is a valid combination, and b) unnecessary, because actual invalid flag combinations are already handled at the vfs level in do_renameat2() before we get called. So, remove it. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> 02 December 2021, 01:27:48 UTC
52e81b6 Dave Airlie 02 December 2021, 00:26:31 UTC Merge tag 'amd-drm-fixes-5.16-2021-12-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-12-01: amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211201232802.5801-1-alexander.deucher@amd.com 02 December 2021, 00:26:32 UTC
8b233a8 Dave Airlie 02 December 2021, 00:20:28 UTC Merge tag 'drm-msm-fixes-2021-11-28' of https://gitlab.freedesktop.org/drm/msm into drm-fixes msm misc fixes, build, display Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsV-ntO_u323XMKuD6bgbgvXporwi1sbyXwNDAuA52Afw@mail.gmail.com 02 December 2021, 00:20:43 UTC
b50db70 Feng Tang 17 November 2021, 02:37:51 UTC x86/tsc: Disable clocksource watchdog for TSC on qualified platorms There are cases that the TSC clocksource is wrongly judged as unstable by the clocksource watchdog mechanism which tries to validate the TSC against HPET, PM_TIMER or jiffies. While there is hardly a general reliable way to check the validity of a watchdog, Thomas Gleixner proposed [1]: "I'm inclined to lift that requirement when the CPU has: 1) X86_FEATURE_CONSTANT_TSC 2) X86_FEATURE_NONSTOP_TSC 3) X86_FEATURE_NONSTOP_TSC_S3 4) X86_FEATURE_TSC_ADJUST 5) At max. 4 sockets After two decades of horrors we're finally at a point where TSC seems to be halfway reliable and less abused by BIOS tinkerers. TSC_ADJUST was really key as we can now detect even small modifications reliably and the important point is that we can cure them as well (not pretty but better than all other options)." As feature #3 X86_FEATURE_NONSTOP_TSC_S3 only exists on several generations of Atom processorz, and is always coupled with X86_FEATURE_CONSTANT_TSC and X86_FEATURE_NONSTOP_TSC, skip checking it, and also be more defensive to use maximal 2 sockets. The check is done inside tsc_init() before registering 'tsc-early' and 'tsc' clocksources, as there were cases that both of them had been wrongly judged as unreliable. For more background of tsc/watchdog, there is a good summary in [2] [tglx} Update vs. jiffies: On systems where the only remaining clocksource aside of TSC is jiffies there is no way to make this work because that creates a circular dependency. Jiffies accuracy depends on not missing a periodic timer interrupt, which is not guaranteed. That could be detected by TSC, but as TSC is not trusted this cannot be compensated. The consequence is a circulus vitiosus which results in shutting down TSC and falling back to the jiffies clocksource which is even more unreliable. [1]. https://lore.kernel.org/lkml/87eekfk8bd.fsf@nanos.tec.linutronix.de/ [2]. https://lore.kernel.org/lkml/87a6pimt1f.ffs@nanos.tec.linutronix.de/ [ tglx: Refine comment and amend changelog ] Fixes: 6e3cd95234dc ("x86/hpet: Use another crystalball to evaluate HPET usability") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211117023751.24190-2-feng.tang@intel.com 01 December 2021, 23:40:36 UTC
c7719e7 Feng Tang 17 November 2021, 02:37:50 UTC x86/tsc: Add a timer to make sure TSC_adjust is always checked The TSC_ADJUST register is checked every time a CPU enters idle state, but Thomas Gleixner mentioned there is still a caveat that a system won't enter idle [1], either because it's too busy or configured purposely to not enter idle. Setup a periodic timer (every 10 minutes) to make sure the check is happening on a regular base. [1] https://lore.kernel.org/lkml/875z286xtk.fsf@nanos.tec.linutronix.de/ Fixes: 6e3cd95234dc ("x86/hpet: Use another crystalball to evaluate HPET usability") Requested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211117023751.24190-1-feng.tang@intel.com 01 December 2021, 23:40:35 UTC
3abfe30 Philip Yang 29 November 2021, 17:33:05 UTC drm/amdkfd: process_info lock not needed for svm process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms and userptr valid/inval list, svm_range_restore_work and svm_range_set_attr don't access those, so do not need to take process_info lock. This will avoid potential circular locking issue. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 01 December 2021, 22:09:58 UTC
428890a shaoyunl 30 November 2021, 02:29:05 UTC drm/amdgpu: adjust the kfd reset sequence in reset sriov function This change revert previous commits: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") This change moves the amdgpu_amdkfd_pre_reset to an earlier place in amdgpu_device_reset_sriov, presumably to address the sequence issue that the first patch was originally meant to fix. Some register access(GRBM_GFX_CNTL) only be allowed on full access mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov function. Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 01 December 2021, 22:09:30 UTC
2da34b7 Perry Yuan 19 November 2021, 09:27:55 UTC drm/amd/display: add connector type check for CRC source set [Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 01 December 2021, 22:08:47 UTC
494f2e4 Philip Yang 26 November 2021, 23:43:09 UTC drm/amdkfd: fix double free mem structure drm_gem_object_put calls release_notify callback to free the mem structure and unreserve_mem_limit, move it down after the last access of mem and make it conditional call. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 01 December 2021, 22:08:00 UTC
fc2c456 Philip Yang 26 November 2021, 17:42:50 UTC drm/amdkfd: set "r = 0" explicitly before goto To silence the following Smatch static checker warning: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615 svm_range_restore_pages() warn: missing error code here? 'get_task_mm()' failed. 'r' = '0' Signed-off-by: Philip Yang <Philip.Yang@amd.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 01 December 2021, 22:07:33 UTC
back to top