https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
a188339 Linux 5.2-rc1 19 May 2019, 22:47:09 UTC
2e2c122 Merge tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBIFS fixes from Richard Weinberger: - build errors wrt xattrs - mismerge which lead to a wrong Kconfig ifdef - missing endianness conversion * tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Convert xattr inum to host order ubifs: Use correct config name for encryption ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR 19 May 2019, 22:22:03 UTC
cb6f873 Merge branch 'akpm' (patches from Andrew) Merge yet more updates from Andrew Morton: "A few final bits: - large changes to vmalloc, yielding large performance benefits - tweak the console-flush-on-panic code - a few fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: panic: add an option to replay all the printk message in buffer initramfs: don't free a non-existent initrd fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro mm/vmalloc.c: keep track of free blocks for vmap allocation 19 May 2019, 19:15:32 UTC
ff8583d Merge tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption - exclude tracked files from .gitignore - re-enable -Wint-in-bool-context warning - refactor samples/Makefile - stop building immediately if syncconfig fails - do not sprinkle error messages when $(CC) does not exist - move arch/alpha/defconfig to the configs subdirectory - remove crappy header search path manipulation - add comment lines to .config to clarify the end of menu blocks - check uniqueness of module names (adding new warnings intentionally) * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: use 'else ifneq' for Makefile to improve readability kbuild: check uniqueness of module names kconfig: Terminate menu blocks with a comment in the generated config kbuild: add LICENSES to KBUILD_ALLDIRS kbuild: remove 'addtree' and 'flags' magic for header search paths treewide: prefix header search paths with $(srctree)/ media: prefix header search paths with $(srctree)/ media: remove unneeded header search paths alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig kbuild: terminate Kconfig when $(CC) or $(LD) is missing kbuild: turn auto.conf.cmd into a mandatory include file .gitignore: exclude .get_maintainer.ignore and .gitattributes kbuild: add all Clang-specific flags unconditionally kbuild: Don't try to add '-fcatch-undefined-behavior' flag kbuild: add some extra warning flags unconditionally kbuild: add -Wvla flag unconditionally arch: remove dangling asm-generic wrappers samples: guard sub-directories with CONFIG options kbuild: re-enable int-in-bool-context warning MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* ... 19 May 2019, 18:53:58 UTC
f23d871 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Some I2C core API additions which are kind of simple but enhance error checking for users a lot, especially by returning errno now. There are wrappers to still support the old API but it will be removed once all users are converted" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: add device-managed version of i2c_new_dummy i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy 19 May 2019, 18:47:03 UTC
c4d36b6 Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Some bug fixes, and an update to the URL's for the final version of Unicode 12.1.0" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid panic during forced reboot due to aborted journal ext4: fix block validity checks for journal inodes using indirect blocks unicode: update to Unicode 12.1.0 final unicode: add missing check for an error return from utf8lookup() ext4: fix miscellaneous sparse warnings ext4: unsigned int compared against zero ext4: fix use-after-free in dx_release() ext4: fix data corruption caused by overlapping unaligned and aligned IO jbd2: fix potential double free ext4: zero out the unused memory region in the extent tree block 19 May 2019, 18:43:16 UTC
d8848ee Merge tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Minor cleanup and fixes, one for stable, four rdma (smbdirect) related. Also adds SEEK_HOLE support" * tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add support for SEEK_DATA and SEEK_HOLE Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file cifs: Allocate memory for all iovs in smb2_ioctl cifs: Don't match port on SMBDirect transport cifs:smbd Use the correct DMA direction when sending data cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called cifs: use the right include for signal_pending() smb3: trivial cleanup to smb2ops.c cifs: cleanup smb2ops.c and normalize strings smb3: display session id in debug data 19 May 2019, 18:38:18 UTC
1ba3b5d Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Ingo Molnar: "perf.data: - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x perf.data file size reduction on variety of tested workloads what saves storage space on larger server systems where perf.data size can easily reach several tens or even hundreds of GiBs, especially when profiling with DWARF-based stacks and tracing of context switches. perf record: - Improve -user-regs/intr-regs suggestions to overcome errors perf annotate: - Remove hist__account_cycles() from callback, speeding up branch processing (perf record -b) perf stat: - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for both hardware threads in a core. We can already do this with --per-core, but it's often useful to do this together with other metrics that are collected per hardware thread. I.e. now its possible to do this per-event, and have it mixed with other events not aggregated by core. arm64: - Map Brahma-B53 CPUID to cortex-a53 events. - Add Cortex-A57 and Cortex-A72 events. csky: - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work on the C-SKY arch. x86: - Add support for recording and printing XMM registers, available, for instance, on Icelake. - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support. UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP. Intel PT: - Fix instructions sampling rate. - Timestamp fixes. - Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste the trees, useful for e-mailing" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) perf stat: Support 'percore' event qualifier perf stat: Factor out aggregate counts printing perf tools: Add a 'percore' event qualifier perf docs: Add description for stderr perf intel-pt: Fix sample timestamp wrt non-taken branches perf intel-pt: Fix improved sample timestamp perf intel-pt: Fix instructions sampling rate perf regs x86: Add X86 specific arch__intr_reg_mask() perf parse-regs: Add generic support for arch__intr/user_reg_mask() perf parse-regs: Split parse_regs perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events perf vendor events arm64: Remove [[:xdigit:]] wildcard perf jevents: Remove unused variable perf test zstd: Fixup verbose mode output perf tests: Implement Zstd comp/decomp integration test perf inject: Enable COMPRESSED record decompression perf report: Implement perf.data record decompression perf record: Implement -z,--compression_level[=<n>] option perf report: Add stub processing of compressed events for -D ... 19 May 2019, 18:20:22 UTC
a13f950 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer 19 May 2019, 18:11:20 UTC
d9351ea Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ... 19 May 2019, 17:58:45 UTC
39feaa3 Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "Fix an EFI-fb regression that affects certain x86 systems" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types 19 May 2019, 17:33:26 UTC
1335d9a Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Ingo Molnar: "This fixes a particularly thorny munmap() bug with MPX, plus fixes a host build environment assumption in objtool" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Allow AR to be overridden with HOSTAR x86/mpx, mm/core: Fix recursive munmap() corruption 19 May 2019, 17:23:24 UTC
4c4a5c9 Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: dts: sprd: Add clock properties for serial devices Opt out of scripts/get_maintainer.pl ARM: ixp4xx: Remove duplicated include from common.c soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 arm64: tegra: Select ARM_GIC_PM amba: tegra-ahb: Mark PM functions as __maybe_unused ARM: dts: logicpd-som-lv: Fix MMC1 card detect ARM: mvebu: drop return from void function ARM: mvebu: prefix coprocessor operand with p ARM: mvebu: drop unnecessary label ARM: mvebu: fix a leaked reference by adding missing of_node_put ARM: socfpga_defconfig: enable LTC2497 ARM: mvebu: kirkwood: remove error message when retrieving mac address ARM: at91: sama5: make ov2640 as a module ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM soc/fsl/qe: Fix an error code in qe_pin_request() ... 19 May 2019, 17:16:39 UTC
86a78a8 Merge tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix going back to stable, for a bug on 32-bit introduced when we added support for THREAD_INFO_IN_TASK. A fix for a typo in a recent rework of our hugetlb code that leads to crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE. Two fixes for our recent rework of the address layout on 64-bit hash CPUs, both only triggered when userspace tries to access addresses outside the user or kernel address ranges. Finally a fix for a recently introduced double free in an error path in our cacheinfo code. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C. Harding" * tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/cacheinfo: Remove double free powerpc/mm/hash: Fix get_region_id() for invalid addresses powerpc/mm: Drop VM_BUG_ON in get_region_id() powerpc/mm: Fix crashes with hugepages & 4K pages powerpc/32s: fix flush_hash_pages() on SMP 19 May 2019, 17:10:15 UTC
bcd1739 Merge tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull a few more MIPS updates from Paul Burton: "Some SGI IP27 specific PCI rework and a batch of fixes: - A build fix for BMIPS5000 configurations with CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery. - A fix to report supported ISAs correctly on older Ingenic SoCs which incorrectly indicate MIPSr2 support in their cop0 Config register. - Some PCI modernization for SGI IP27 systems as part of ongoing work to support some other SGI systems. - A fix allowing use of appended DTB files with generic kernels. - DMA mask fixes for SGI IP22 & Alchemy systems" * tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Alchemy: add DMA masks for on-chip ethernet MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask generic: fix appended dtb support MIPS: SGI-IP27: abstract chipset irq from bridge MIPS: SGI-IP27: use generic PCI driver MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled 19 May 2019, 17:05:28 UTC
b0bb126 Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains an assortment of RISC-V related patches that I'd like to target for the 5.2 merge window. Most of the patches are cleanups, but there are a handful of user-visible changes: - The nosmp and nr_cpus command-line arguments are now supported, which work like normal. - The SBI console no longer installs itself as a preferred console, we rely on standard mechanisms (/chosen, command-line, hueristics) instead. - sfence_remove_sfence_vma{,_asid} now pass their arguments along to the SBI call. - Modules now support BUG(). - A missing sfence.vma during boot has been added. This bug only manifests during boot. - The arch/riscv support for SiFive's L2 cache controller has been merged, which should un-block the EDAC framework work. I've only tested this on QEMU again, as I didn't have time to get things running on the Unleashed. The latest master from this morning merges in cleanly and passes the tests as well" * tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits) riscv: fix locking violation in page fault handler RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs RISC-V: Add DT documentation for SiFive L2 Cache Controller RISC-V: Avoid using invalid intermediate translations riscv: Support BUG() in kernel module riscv: Add the support for c.ebreak check in is_valid_bugaddr() riscv: support trap-based WARN() riscv: fix sbi_remote_sfence_vma{,_asid}. riscv: move switch_mm to its own file riscv: move flush_icache_{all,mm} to cacheflush.c tty: Don't force RISCV SBI console as preferred console RISC-V: Access CSRs using CSR numbers RISC-V: Add interrupt related SCAUSE defines in asm/csr.h RISC-V: Use tabs to align macro values in asm/csr.h RISC-V: Fix minor checkpatch issues. RISC-V: Support nr_cpus command line option. RISC-V: Implement nosmp commandline option. RISC-V: Add RISC-V specific arch_match_cpu_phys_id riscv: vdso: drop unnecessary cc-ldoption riscv: call pm_power_off from machine_halt / machine_power_off ... 19 May 2019, 16:56:36 UTC
fc2694e kconfig: use 'else ifneq' for Makefile to improve readability 'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81 or later, which is the requirement for building the kernel since commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81"). Use it to improve the readability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 19 May 2019, 00:34:35 UTC
de6da1e panic: add an option to replay all the printk message in buffer Currently on panic, kernel will lower the loglevel and print out pending printk msg only with console_flush_on_panic(). Add an option for users to configure the "panic_print" to replay all dmesg in buffer, some of which they may have never seen due to the loglevel setting, which will help panic debugging . [feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()] Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com [feng.tang@intel.com: use logbuf lock to protect the console log index] Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
5d59aa8 initramfs: don't free a non-existent initrd Since commit 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails"), the kernel has unconditionally attempted to free the initrd even if it doesn't exist. In the non-existent case this causes a boot-time splat if CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a NULL address. Instead we should check that the initrd actually exists and only attempt to free it if it does. Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com Fixes: 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails") Signed-off-by: Steven Price <steven.price@arm.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
ec084de fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb switch may not go to the workqueue after synchronize_rcu(). Thus previous scheduled switches was not finished even flushing the workqueue, which will cause a NULL pointer dereferenced followed below. VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds. Have a nice day... BUG: unable to handle kernel NULL pointer dereference at 0000000000000278 evict+0xb3/0x180 iput+0x1b0/0x230 inode_switch_wbs_work_fn+0x3c0/0x6a0 worker_thread+0x4e/0x490 ? process_one_work+0x410/0x410 kthread+0xe6/0x100 ret_from_fork+0x39/0x50 Replace the synchronize_rcu() call with a rcu_barrier() to wait for all pending callbacks to finish. And inc isw_nr_in_flight after call_rcu() in inode_switch_wbs() to make more sense. Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.com Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Suggested-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
60fce36 mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock syzbot reported the following error from a tree with a head commit of baf76f0c58ae ("slip: make slhc_free() silently accept an error pointer") BUG: unable to handle kernel paging request at ffffea0003348000 #PF error: [normal kernel read fault] PGD 12c3f9067 P4D 12c3f9067 PUD 12c3f8067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 28916 Comm: syz-executor.2 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:314 [inline] RIP: 0010:PageCompound include/linux/page-flags.h:186 [inline] RIP: 0010:isolate_freepages_block+0x1c0/0xd40 mm/compaction.c:579 Code: 01 d8 ff 4d 85 ed 0f 84 ef 07 00 00 e8 29 00 d8 ff 4c 89 e0 83 85 38 ff ff ff 01 48 c1 e8 03 42 80 3c 38 00 0f 85 31 0a 00 00 <4d> 8b 2c 24 31 ff 49 c1 ed 10 41 83 e5 01 44 89 ee e8 3a 01 d8 ff RSP: 0018:ffff88802b31eab8 EFLAGS: 00010246 RAX: 1ffffd4000669000 RBX: 00000000000cd200 RCX: ffffc9000a235000 RDX: 000000000001ca5e RSI: ffffffff81988cc7 RDI: 0000000000000001 RBP: ffff88802b31ebd8 R08: ffff88805af700c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffea0003348000 R13: 0000000000000000 R14: ffff88802b31f030 R15: dffffc0000000000 FS: 00007f61648dc700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea0003348000 CR3: 0000000037c64000 CR4: 00000000001426e0 Call Trace: fast_isolate_around mm/compaction.c:1243 [inline] fast_isolate_freepages mm/compaction.c:1418 [inline] isolate_freepages mm/compaction.c:1438 [inline] compaction_alloc+0x1aee/0x22e0 mm/compaction.c:1550 There is no reproducer and it is difficult to hit -- 1 crash every few days. The issue is very similar to the fix in commit 6b0868c820ff ("mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints"). When isolating free pages around a target pageblock, the boundary handling is off by one and can stray into the next pageblock. Triggering the syzbot error requires that the end of pageblock is section or zone aligned, and that the next section is unpopulated. A more subtle consequence of the bug is that pageblocks were being improperly used as migration targets which potentially hurts fragmentation avoidance in the long-term one page at a time. A debugging patch revealed that it's definitely possible to stray outside of a pageblock which is not intended. While syzbot cannot be used to verify this patch, it was confirmed that the debugging warning no longer triggers with this patch applied. It has also been confirmed that the THP allocation stress tests are not degraded by this patch. Link: http://lkml.kernel.org/r/20190510182124.GI18914@techsingularity.net Fixes: e332f741a8dd ("mm, compaction: be selective about what pageblocks to clear skip hints") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: syzbot+d84c80f9fe26a0f7a734@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Qian Cai <cai@lca.pw> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
a6cf4e0 mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro This macro adds some debug code to check that vmap allocations are happened in ascending order. By default this option is set to 0 and not active. It requires recompilation of the kernel to activate it. Set to 1, compile the kernel. [urezki@gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-4-urezki@gmail.com Link: http://lkml.kernel.org/r/20190402162531.10888-4-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
bb850f4 mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro This macro adds some debug code to check that the augment tree is maintained correctly, meaning that every node contains valid subtree_max_size value. By default this option is set to 0 and not active. It requires recompilation of the kernel to activate it. Set to 1, compile the kernel. [urezki@gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-3-urezki@gmail.com Link: http://lkml.kernel.org/r/20190402162531.10888-3-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
68ad4a3 mm/vmalloc.c: keep track of free blocks for vmap allocation Patch series "improve vmap allocation", v3. Objective --------- Please have a look for the description at: https://lkml.org/lkml/2018/10/19/786 but let me also summarize it a bit here as well. The current implementation has O(N) complexity. Requests with different permissive parameters can lead to long allocation time. When i say "long" i mean milliseconds. Description ----------- This approach organizes the KVA memory layout into free areas of the 1-ULONG_MAX range, i.e. an allocation is done over free areas lookups, instead of finding a hole between two busy blocks. It allows to have lower number of objects which represent the free space, therefore to have less fragmented memory allocator. Because free blocks are always as large as possible. It uses the augment tree where all free areas are sorted in ascending order of va->va_start address in pair with linked list that provides O(1) access to prev/next elements. Since the tree is augment, we also maintain the "subtree_max_size" of VA that reflects a maximum available free block in its left or right sub-tree. Knowing that, we can easily traversal toward the lowest (left most path) free area. Allocation: ~O(log(N)) complexity. It is sequential allocation method therefore tends to maximize locality. The search is done until a first suitable block is large enough to encompass the requested parameters. Bigger areas are split. I copy paste here the description of how the area is split, since i described it in https://lkml.org/lkml/2018/10/19/786 <snip> A free block can be split by three different ways. Their names are FL_FIT_TYPE, LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested size and alignment fit to a free block. FL_FIT_TYPE - in this case a free block is just removed from the free list/tree because it fully fits. Comparing with current design there is an extra work with rb-tree updating. LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is just cutting a free block. It is as fast as a current design. Most of the vmalloc allocations just end up with this case, because the edge is always aligned to 1. NE_FIT_TYPE - Is much less common case. Basically it happens when requested size and alignment does not fit left nor right edges, i.e. it is between them. In this case during splitting we have to build a remaining left free area and place it back to the free list/tree. Comparing with current design there are two extra steps. First one is we have to allocate a new vmap_area structure. Second one we have to insert that remaining free block to the address sorted list/tree. In order to optimize a first case there is a cache with free_vmap objects. Instead of allocating from slab we just take an object from the cache and reuse it. Second one is pretty optimized. Since we know a start point in the tree we do not do a search from the top. Instead a traversal begins from a rb-tree node we split. <snip> De-allocation. ~O(log(N)) complexity. An area is not inserted straight away to the tree/list, instead we identify the spot first, checking if it can be merged around neighbors. The list provides O(1) access to prev/next, so it is pretty fast to check it. Summarizing. If merged then large coalesced areas are created, if not the area is just linked making more fragments. There is one more thing that i should mention here. After modification of VA node, its subtree_max_size is updated if it was/is the biggest area in its left or right sub-tree. Apart of that it can also be populated back to upper levels to fix the tree. For more details please have a look at the __augment_tree_propagate_from() function and the description. Tests and stressing ------------------- I use the "test_vmalloc.sh" test driver available under "tools/testing/selftests/vm/" since 5.1-rc1 kernel. Just trigger "sudo ./test_vmalloc.sh" to find out how to deal with it. Tested on different platforms including x86_64/i686/ARM64/x86_64_NUMA. Regarding last one, i do not have any physical access to NUMA system, therefore i emulated it. The time of stressing is days. If you run the test driver in "stress mode", you also need the patch that is in Andrew's tree but not in Linux 5.1-rc1. So, please apply it: http://git.cmpxchg.org/cgit.cgi/linux-mmotm.git/commit/?id=e0cf7749bade6da318e98e934a24d8b62fab512c After massive testing, i have not identified any problems like memory leaks, crashes or kernel panics. I find it stable, but more testing would be good. Performance analysis -------------------- I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another is HiKey960(arm64) board. i5-3320M runs on 4.20 kernel, whereas Hikey960 uses 4.15 kernel. I have both system which could run on 5.1-rc1 as well, but the results have not been ready by time i an writing this. Currently it consist of 8 tests. There are three of them which correspond to different types of splitting(to compare with default). We have 3 ones(see above). Another 5 do allocations in different conditions. a) sudo ./test_vmalloc.sh performance When the test driver is run in "performance" mode, it runs all available tests pinned to first online CPU with sequential execution test order. We do it in order to get stable and repeatable results. Take a look at time difference in "long_busy_list_alloc_test". It is not surprising because the worst case is O(N). # i5-3320M How many cycles all tests took: CPU0=646919905370(default) cycles vs CPU0=193290498550(patched) cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_default.txt ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_patched.txt # Hikey960 8x CPUs How many cycles all tests took: CPU0=3478683207 cycles vs CPU0=463767978 cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_default.txt ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_patched.txt b) time sudo ./test_vmalloc.sh test_repeat_count=1 With this configuration, all tests are run on all available online CPUs. Before running each CPU shuffles its tests execution order. It gives random allocation behaviour. So it is rough comparison, but it puts in the picture for sure. # i5-3320M <default> vs <patched> real 101m22.813s real 0m56.805s user 0m0.011s user 0m0.015s sys 0m5.076s sys 0m0.023s # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_count_1_default.txt ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_count_1_patched.txt # Hikey960 8x CPUs <default> vs <patched> real unknown real 4m25.214s user unknown user 0m0.011s sys unknown sys 0m0.670s I did not manage to complete this test on "default Hikey960" kernel version. After 24 hours it was still running, therefore i had to cancel it. That is why real/user/sys are "unknown". This patch (of 3): Currently an allocation of the new vmap area is done over busy list iteration(complexity O(n)) until a suitable hole is found between two busy areas. Therefore each new allocation causes the list being grown. Due to over fragmented list and different permissive parameters an allocation can take a long time. For example on embedded devices it is milliseconds. This patch organizes the KVA memory layout into free areas of the 1-ULONG_MAX range. It uses an augment red-black tree that keeps blocks sorted by their offsets in pair with linked list keeping the free space in order of increasing addresses. Nodes are augmented with the size of the maximum available free block in its left or right sub-tree. Thus, that allows to take a decision and traversal toward the block that will fit and will have the lowest start address, i.e. it is sequential allocation. Allocation: to allocate a new block a search is done over the tree until a suitable lowest(left most) block is large enough to encompass: the requested size, alignment and vstart point. If the block is bigger than requested size - it is split. De-allocation: when a busy vmap area is freed it can either be merged or inserted to the tree. Red-black tree allows efficiently find a spot whereas a linked list provides a constant-time access to previous and next blocks to check if merging can be done. In case of merging of de-allocated memory chunk a large coalesced area is created. Complexity: ~O(log(N)) [urezki@gmail.com: v3] Link: http://lkml.kernel.org/r/20190402162531.10888-2-urezki@gmail.com [urezki@gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-2-urezki@gmail.com Link: http://lkml.kernel.org/r/20190321190327.11813-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 May 2019, 22:52:26 UTC
62e1c09 Merge tag 'perf-core-for-mingo-5.2-20190517' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf.data: Alexey Budankov: - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x perf.data file size reduction on variety of tested workloads what saves storage space on larger server systems where perf.data size can easily reach several tens or even hundreds of GiBs, especially when profiling with DWARF-based stacks and tracing of context switches. perf record: Arnaldo Carvalho de Melo - Improve -user-regs/intr-regs suggestions to overcome errors. perf annotate: Jin Yao: - Remove hist__account_cycles() from callback, speeding up branch processing (perf record -b). perf stat: - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for both hardware threads in a core. We can already do this with --per-core, but it's often useful to do this together with other metrics that are collected per hardware thread. I.e. now its possible to do this per-event, and have it mixed with other events not aggregated by core. core libraries: Donald Yandt: - Check for errors when doing fgets(/proc/version). Jiri Olsa: - Speed up report for perf compiled with linbunwind. tools headers: Arnaldo Carvalho de Melo - Update memcpy_64.S, x86's kvm.h and pt_regs.h. arm64: Florian Fainelli: - Map Brahma-B53 CPUID to cortex-a53 events. - Add Cortex-A57 and Cortex-A72 events. csky: Mao Han: - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work on the C-SKY arch. x86: Andi Kleen/Kan Liang: - Add support for recording and printing XMM registers, available, for instance, on Icelake. Kan Liang: - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support. UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP. Intel PT: Adrian Hunter . Fix instructions sampling rate. . Timestamp fixes. . Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste the trees, useful for e-mailing. Documentation: Thomas Richter: - Add description for 'perf --debug stderr=1', which redirects stderr to stdout. libtraceevent: Tzvetomir Stoyanov: - Add man pages for the various APIs. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 May 2019, 08:24:43 UTC
3a48a91 kbuild: check uniqueness of module names In the recent build test of linux-next, Stephen saw a build error caused by a broken .tmp_versions/*.mod file: https://lkml.org/lkml/2019/5/13/991 drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same basename, and there is a race in generating .tmp_versions/asix.mod Kbuild has not checked this before, and it suddenly shows up with obscure error messages when this kind of race occurs. Non-unique module names cause various sort of problems, but it is not trivial to catch them by eyes. Hence, this script. It checks not only real modules, but also built-in modules (i.e. controlled by tristate CONFIG option, but currently compiled with =y). Non-unique names for built-in modules also cause problems because /sys/modules/ would fall over. For the latest kernel, I tested "make allmodconfig all" (or more quickly "make allyesconfig modules"), and it detected the following: warning: same basename if the following are built as modules: drivers/regulator/88pm800.ko drivers/mfd/88pm800.ko warning: same basename if the following are built as modules: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko warning: same basename if the following are built as modules: drivers/net/phy/asix.ko drivers/net/usb/asix.ko warning: same basename if the following are built as modules: fs/coda/coda.ko drivers/media/platform/coda/coda.ko warning: same basename if the following are built as modules: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> 18 May 2019, 06:35:02 UTC
aff11cd kconfig: Terminate menu blocks with a comment in the generated config Currently menu blocks start with a pretty header but end with nothing in the generated config. So next config options stick together with the options from the menu block. Let's terminate menu blocks in the generated config with a comment and a newline if needed. Example: ... CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=y CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options CONFIG_HAMRADIO=y ... Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 06:31:24 UTC
233c741 kbuild: add LICENSES to KBUILD_ALLDIRS For *-pkg targets, the LICENSES directory should be included in the source tarball. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:57 UTC
cdd750b kbuild: remove 'addtree' and 'flags' magic for header search paths The 'addtree' and 'flags' in scripts/Kbuild.include are so compilecated and ugly. As I mentioned in [1], Kbuild should stop automatic prefixing of header search path options. I fixed up (almost) all Makefiles in the kernel. Now 'addtree' and 'flags' have been removed. Kbuild still caters to add $(srctree)/$(src) and $(objtree)/$(obj) to the header search path for O= building, but never touches extra compiler options from ccflags-y etc. [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:57 UTC
9cc342f treewide: prefix header search paths with $(srctree)/ Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:57 UTC
14340de media: prefix header search paths with $(srctree)/ Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> 18 May 2019, 02:49:56 UTC
cc966c9 media: remove unneeded header search paths I was able to build without these extra header search paths. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:56 UTC
986a137 alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig As of Linux 5.1, alpha and s390 are the last architectures that have defconfig in arch/*/ instead of arch/*/configs/. $ find arch -name defconfig | sort arch/alpha/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/defconfig The arch/$(ARCH)/defconfig is the hard-coded default in Kconfig, and I want to deprecate it after evacuating the remaining defconfig into the standard location, arch/*/configs/. Define KBUILD_DEFCONFIG like other architectures, and move defconfig into the configs/ subdirectory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> 18 May 2019, 02:49:55 UTC
902a689 kbuild: terminate Kconfig when $(CC) or $(LD) is missing If the compiler specified by $(CC) is not present, the Kconfig stage sprinkles 'not found' messages, then succeeds. $ make CROSS_COMPILE=foo defconfig /bin/sh: 1: foogcc: not found /bin/sh: 1: foogcc: not found *** Default configuration is based on 'x86_64_defconfig' ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found init/Kconfig:16:warning: 'GCC_VERSION': number is invalid # # configuration written to .config # Terminate parsing files immediately if $(CC) or $(LD) is not found. "make *config" will fail more nicely. $ make CROSS_COMPILE=foo defconfig *** Default configuration is based on 'x86_64_defconfig' scripts/Kconfig.include:34: compiler 'foogcc' not found make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1 make: *** [Makefile;557: defconfig] Error 2 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:55 UTC
d2f8ae0 kbuild: turn auto.conf.cmd into a mandatory include file syncconfig is responsible for keeping auto.conf up-to-date, so if it fails for any reason, the build must be terminated immediately. However, since commit 9390dff66a52 ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing"), Kbuild continues running even after syncconfig fails. You can confirm this by intentionally making syncconfig error out: diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 08ba146..307b9de 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -1023,6 +1023,9 @@ int conf_write_autoconf(int overwrite) FILE *out, *tristate, *out_h; int i; + if (overwrite) + return 1; + if (!overwrite && is_present(autoconf_name)) return 0; Then, syncconfig fails, but Make would not stop: $ make -s mrproper allyesconfig defconfig $ make scripts/kconfig/conf --syncconfig Kconfig *** Error during sync of the configuration. make[2]: *** [scripts/kconfig/Makefile;69: syncconfig] Error 1 make[1]: *** [Makefile;557: syncconfig] Error 2 make: *** [include/config/auto.conf.cmd] Deleting file 'include/config/tristate.conf' make: Failed to remake makefile 'include/config/auto.conf'. SYSTBL arch/x86/include/generated/asm/syscalls_32.h SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h SYSTBL arch/x86/include/generated/asm/syscalls_64.h [ continue running ... ] The reason is in the behavior of a pattern rule with multi-targets. %/auto.conf %/auto.conf.cmd %/tristate.conf: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig GNU Make knows this rule is responsible for making all the three files simultaneously. As far as examined, auto.conf.cmd is the target in question when this rule is invoked. It is probably because auto.conf.cmd is included below the inclusion of auto.conf. The inclusion of auto.conf is mandatory, while that of auto.conf.cmd is optional. GNU Make does not care about the failure in the process of updating optional include files. I filed this issue (https://savannah.gnu.org/bugs/?56301) in case this behavior could be improved somehow in future releases of GNU Make. Anyway, it is quite easy to fix our Makefile. Given that auto.conf is already a mandatory include file, there is no reason to stick auto.conf.cmd optional. Make it mandatory as well. Cc: linux-stable <stable@vger.kernel.org> # 5.0+ Fixes: 9390dff66a52 ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:54 UTC
f46e65d .gitignore: exclude .get_maintainer.ignore and .gitattributes Also, sort the patterns alphabetically. Update the comment since we have non-git files here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:54 UTC
a149430 kbuild: add all Clang-specific flags unconditionally We do not support old Clang versions. Upgrade your clang version if any of these flags is unsupported. Let's add all flags inside ifdef CONFIG_CC_IS_CLANG unconditionally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> 18 May 2019, 02:49:53 UTC
7eb8e5f kbuild: Don't try to add '-fcatch-undefined-behavior' flag This is no longer a valid option in clang, it was removed in 3.5, which we don't support. https://github.com/llvm/llvm-project/commit/cb3f812b6b9fab8f3b41414f24e90222170417b4 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:53 UTC
4c8dd95 kbuild: add some extra warning flags unconditionally These flags are documented in the GCC 4.6 manual, and recognized by Clang as well. Let's rip off the cc-option / cc-disable-warning switches. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> 18 May 2019, 02:49:53 UTC
8289f91 kbuild: add -Wvla flag unconditionally This flag is documented in the GCC 4.6 manual, and recognized by Clang as well. Let's rip off the cc-option switch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> 18 May 2019, 02:49:52 UTC
33ff99f arch: remove dangling asm-generic wrappers These generic-y defines do not have the corresponding generic header in include/asm-generic/, so they are definitely invalid. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:49:52 UTC
6944a06 samples: guard sub-directories with CONFIG options Do not descend to sub-directories when unneeded. I used subdir-$(CONFIG_...) for hidraw, seccomp, and vfs because they only contain host programs. While we are here, let's add SPDX License tag, and sort the directories alphabetically. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:29:01 UTC
a3bc886 kbuild: re-enable int-in-bool-context warning This warning was disabled by commit bd664f6b3e37 ("disable new gcc-7.1.1 warnings for now") just because it was too noisy. Thanks to Arnd Bergmann, all warnings have been fixed. Now, we are ready to re-enable it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> 18 May 2019, 02:29:01 UTC
593e0fd MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* scripts/link-vmlinux.sh is part of kbuild so extend the pattern to match any vmlinux related scripts. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:29:01 UTC
178aa03 sh: exclude vmlinux.scr from .gitignore pattern arch/sh/boot/.gitignore has the pattern "vmlinux*"; this is effective not only for the current directory, but also for any sub-directories. So, from the point of .gitignore grammar, the following check-in files are also considered to be ignored: arch/sh/boot/compressed/vmlinux.scr arch/sh/boot/romimage/vmlinux.scr As the manual gitignore(5) says "Files already tracked by Git are not affected", this is not a problem as far as Git is concerned. However, Git is not the only program that parses .gitignore because .gitignore is useful to distinguish build artifacts from source files. For example, tar(1) supports the --exclude-vcs-ignore option. As of writing, this option does not work perfectly, but it intends to create a tarball excluding files specified by .gitignore. So, I believe it is better to fix this issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:29:01 UTC
5b13f84 sh: vsyscall: drop unnecessary cc-ldoption Towards the goal of removing cc-ldoption, it seems that --hash-style= was added to binutils 2.17.50.0.2 in 2006. The minimal required version of binutils for the kernel according to Documentation/process/changes.rst is 2.20. Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html Cc: clang-built-linux@googlegroups.com Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:29:01 UTC
861fde3 ia64: require -Wl,--hash-style=sysv Towards the goal of removing cc-ldoption, it seems that --hash-style= was added to binutils 2.17.50.0.2 in 2006. The minimal required version of binutils for the kernel according to Documentation/process/changes.rst is 2.20. Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html Cc: clang-built-linux@googlegroups.com Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:29:01 UTC
901b573 csky: remove deprecated arch/csky/boot/dts/include/dt-bindings Having a symbolic link arch/*/boot/dts/include/dt-bindings was deprecated by commit d5d332d3f7e8 ("devicetree: Move include prefixes from arch to separate directory"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 18 May 2019, 02:29:01 UTC
2c1d0e3 ext4: avoid panic during forced reboot due to aborted journal Handling of aborted journal is a special code path different from standard ext4_error() one and it can call panic() as well. Commit 1dc1097ff60e ("ext4: avoid panic during forced reboot") forgot to update this path so fix that omission. Fixes: 1dc1097ff60e ("ext4: avoid panic during forced reboot") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 5.1 17 May 2019, 21:37:18 UTC
72cf0b0 Merge tag 'sound-fix-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few HD-audio fixes, most of which are specific to Realtek codecs" * tag 'sound-fix-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug ALSA: hda: Fix race between creating and refreshing sysfs entries ALSA: hda/realtek - Corrected fixup for System76 Gazelle (gaze14) ALSA: hda/realtek - Avoid superfluous COEF EAPD setups ALSA: hda/realtek - Fixup headphone noise via runtime suspend 17 May 2019, 20:57:54 UTC
0ef0fd3 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "ARM: - support for SVE and Pointer Authentication in guests - PMU improvements POWER: - support for direct access to the POWER9 XIVE interrupt controller - memory and performance optimizations x86: - support for accessing memory not backed by struct page - fixes and refactoring Generic: - dirty page tracking improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits) kvm: fix compilation on aarch64 Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU" kvm: x86: Fix L1TF mitigation for shadow MMU KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing" KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete tests: kvm: Add tests for KVM_SET_NESTED_STATE KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID tests: kvm: Add tests to .gitignore KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one KVM: Fix the bitmap range to copy during clear dirty KVM: arm64: Fix ptrauth ID register masking logic KVM: x86: use direct accessors for RIP and RSP KVM: VMX: Use accessors for GPRs outside of dedicated caching logic KVM: x86: Omit caching logic for always-available GPRs kvm, x86: Properly check whether a pfn is an MMIO or not ... 17 May 2019, 17:33:30 UTC
b8f5fe3 i2c: core: add device-managed version of i2c_new_dummy i2c_new_dummy is typically called from the probe function of the driver for the primary i2c client. It requires calls to i2c_unregister_device in the error path of the probe function and in the remove function. This can be simplified by introducing a device-managed version. Note the changed error case return value type: i2c_new_dummy returns NULL whilst devm_i2c_new_dummy_device returns an ERR_PTR. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [wsa: rename new functions and fix minor kdoc issues] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 17 May 2019, 17:29:40 UTC
7159dbd i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy Currently i2c_new_device and i2c_new_dummy return just NULL in error case although they have more error details internally. Therefore move the functionality into new functions returning detailed errors and add wrappers for compatibility with the current API. This allows to use these functions with detailed error codes within the i2c core or for API extensions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [wsa: rename new functions and fix minor kdoc issues] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Peter Rosin <peda@axentia.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 17 May 2019, 17:28:31 UTC
4489da7 Merge tag 'nds32-for-linus-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: - Clean up codes and Makefile - Fix a vDSO bug - Remove useless functions/header files - Update git repo path in MAINTAINERS * tag 'nds32-for-linus-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: Fix vDSO clock_getres() MAINTAINERS: update nds32 git repo path nds32: don't export low-level cache flushing routines arch: nds32: Kconfig: pedantic formatting nds32: fix semicolon code style issue nds32: vdso: drop unnecessary cc-ldoption nds32: remove unused generic-y += cmpxchg-local.h nds32: Use the correct style for SPDX License Identifier nds32: remove __virt_to_bus and __bus_to_virt nds32: vdso: fix and clean-up Makefile nds32: add vmlinux.lds and vdso.so to .gitignore nds32: ex-exit: Remove unneeded need_resched() loop nds32/io: Remove useless definition of mmiowb() nds32: Removed unused thread flag TIF_USEDFPU 17 May 2019, 17:17:29 UTC
80111bf Merge tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: - Enhancements for the QDIO layer - Remove the RCP trace event - Avoid three build issues - Move the defconfig to the configs directory * tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: move arch/s390/defconfig to arch/s390/configs/defconfig s390/qdio: optimize state inspection of HW-owned SBALs s390/qdio: use get_buf_state() in debug_get_buf_state() s390/qdio: allow to scan all Output SBALs in one go s390/cio: Remove tracing for rchp instruction s390/kasan: adapt disabled_wait usage to avoid build error latent_entropy: avoid build error when plugin cflags are not set s390/boot: fix compiler error due to missing awk strtonum 17 May 2019, 17:08:59 UTC
bf8a9a4 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs mount updates from Al Viro: "Propagation of new syscalls to other architectures + cosmetic change from Christian (fscontext didn't follow the convention for anon inode names)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: Wire up the mount API syscalls on non-x86 arches [ver #2] uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2] uapi, fsopen: use square brackets around "fscontext" [ver #2] 17 May 2019, 16:46:31 UTC
ea7a5f9 Merge tag 'timers-v5.2' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevent updates from Daniel Lezcano: - Add compatible string for suniv for sun4i (Mesih Kilinc) - Add COMPILE_TEST option for sp804 (David Abdurachmanov) - Replace the compensation time when suspend happens on tegra with the one provided by the generic framework (Joseph Lo) - Cleanup, shutdown and oneshot mode fix on milbeaut timer (Sugaya Taichi) - Atmel TCB rework to fix boot failure on boards without PIT or misfunction on system using a preempt-rt kernel (Alexandre Belloni) 17 May 2019, 13:48:06 UTC
672eaf3 powerpc/cacheinfo: Remove double free kfree() after kobject_put(). Who ever wrote this was on crack. Fixes: 7e8039795a80 ("powerpc/cacheinfo: Fix kobject memleak") Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 17 May 2019, 13:28:00 UTC
c179976 powerpc/mm/hash: Fix get_region_id() for invalid addresses Accesses by userspace to random addresses outside the user or kernel address range will generate an SLB fault. When we handle that fault we classify the effective address into several classes, eg. user, kernel linear, kernel virtual etc. For addresses that are completely outside of any valid range, we should not insert an SLB entry at all, and instead immediately an exception. In the past this was handled in two ways. Firstly we would check the top nibble of the address (using REGION_ID(ea)) and that would tell us if the address was user (0), kernel linear (c), kernel virtual (d), or vmemmap (f). If the address didn't match any of these it was invalid. Then for each type of address we would do a secondary check. For the user region we check against H_PGTABLE_RANGE, for kernel linear we would mask the top nibble of the address and then check the address against MAX_PHYSMEM_BITS. As part of commit 0034d395f89d ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range") we replaced REGION_ID() with get_region_id() and changed the masking of the top nibble to only mask the top two bits, which introduced a bug. Addresses less than (4 << 60) are still handled correctly, they are either less than (1 << 60) in which case they are subject to the H_PGTABLE_RANGE check, or they are correctly checked against MAX_PHYSMEM_BITS. However addresses from (4 << 60) to ((0xc << 60) - 1), are incorrectly treated as kernel linear addresses in get_region_id(). Then the top two bits are cleared by EA_MASK in slb_allocate_kernel() and the address is checked against MAX_PHYSMEM_BITS, which it passes due to the masking. The end result is we incorrectly insert SLB entries for those addresses. That is not actually catastrophic, having inserted the SLB entry we will then go on to take a page fault for the address and at that point we detect the problem and report it as a bad fault. Still we should not be inserting those entries, or treating them as kernel linear addresses in the first place. So fix get_region_id() to detect addresses in that range and return an invalid region id, which we cause use to not insert an SLB entry and directly report an exception. Fixes: 0034d395f89d ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Drop change to EA_MASK for now, rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 17 May 2019, 12:57:40 UTC
c011d23 kvm: fix compilation on aarch64 Commit e45adf665a53 ("KVM: Introduce a new guest mapping API", 2019-01-31) introduced a build failure on aarch64 defconfig: $ make -j$(nproc) ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- O=out defconfig \ Image.gz ... ../arch/arm64/kvm/../../../virt/kvm/kvm_main.c: In function '__kvm_map_gfn': ../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1763:9: error: implicit declaration of function 'memremap'; did you mean 'memset_p'? ../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1763:46: error: 'MEMREMAP_WB' undeclared (first use in this function) ../arch/arm64/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_vcpu_unmap': ../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1795:3: error: implicit declaration of function 'memunmap'; did you mean 'vm_munmap'? because these functions are declared in <linux/io.h> rather than <asm/io.h>, and the former was being pulled in already on x86 but not on aarch64. Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 17 May 2019, 12:08:53 UTC
8ea58f1 objtool: Allow AR to be overridden with HOSTAR Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481 Signed-off-by: Ingo Molnar <mingo@kernel.org> 17 May 2019, 09:10:42 UTC
f858553 fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types The following commit: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") updated the EFI framebuffer code to use memory mappings for the linear framebuffer that are permitted by the memory attributes described by the EFI memory map for the particular region, if the framebuffer happens to be covered by the EFI memory map (which is typically only the case for framebuffers in shared memory). This is required since non-x86 systems may require cacheable attributes for memory mappings that are shared with other masters (such as GPUs), and this information cannot be described by the Graphics Output Protocol (GOP) EFI protocol itself, and so we rely on the EFI memory map for this. As reported by James, this breaks some x86 systems: [ 1.173368] efifb: probing for efifb [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000 [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff> [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5 The problem turns out to be that the memory map entry that describes the framebuffer has no memory attributes listed at all, and so we end up with a mem_flags value of 0x0. So work around this by ensuring that the memory map entry's attribute field has a sane value before using it to mask the set of usable attributes. Reported-by: James Hilliard <james.hilliard1@gmail.com> Tested-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.19+ Cc: Borislav Petkov <bp@alien8.de> Cc: James Morse <james.morse@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when ...") Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 17 May 2019, 09:07:42 UTC
8fef990 riscv: fix locking violation in page fault handler When a user mode process accesses an address in the vmalloc area do_page_fault tries to unlock the mmap semaphore when it isn't locked. Signed-off-by: Andreas Schwab <schwab@suse.de> [Palmer: Duplicated code instead of a goto] Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:13 UTC
a967a28 RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs The driver currently supports only SiFive FU540-C000 platform. The initial version of L2 cache controller driver includes: - Initial configuration reporting at boot up. - Support for ECC related functionality. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:13 UTC
5545b6d RISC-V: Add DT documentation for SiFive L2 Cache Controller Add device tree bindings for SiFive FU540 L2 cache controller driver Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:13 UTC
4c3aeb8 RISC-V: Avoid using invalid intermediate translations This is almost entirely a comment. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> 17 May 2019, 03:42:13 UTC
9a6e7af riscv: Support BUG() in kernel module The kernel module is loaded into vmalloc region which is located below to the PAGE_OFFSET. Hence the condition, pc < PAGE_OFFSET, in the is_valid_bugaddr() will filter out all trap exceptions triggered by kernel module. To support BUG() in kernel module, the condition is changed to pc < VMALLOC_START. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:13 UTC
ee72e0e riscv: Add the support for c.ebreak check in is_valid_bugaddr() The macro __BUG_INSN currently is defined as the "ebreak" opcode. The is_valid_bugaddr() function compares the instruction pointed to by $sepc with macro __BUG_INSN to check whether the current trap exception is caused by an "ebreak" instruction. However, this check flow is possibly erroneous because if C extension is supported, the expected trap instruction "ebreak" is possibly translated to "c.ebreak" by the assembler. Therefore, it requires a mechanism to distinguish the length of the instruction in $spec and compare it to the correct trap instruction. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:12 UTC
d18ebc2 riscv: support trap-based WARN() The WARN() related function will trigger a debug exception. This can help developers to analyze the cause of WARN() because if the debugger is connected, the control flow will be transferred to debugging environment. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:12 UTC
a21344d riscv: fix sbi_remote_sfence_vma{,_asid}. Currently sbi_remote_sfence_vma{,_asid} does not pass their arguments to SBI at all, which is semantically incorrect. Neither BBL nor OpenSBI is using these arguments at the moment, and they just do a global flush instead. However we still need to provide correct arguments. Signed-off-by: Gary Guo <gary@garyguo.net> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:12 UTC
f6635f8 riscv: move switch_mm to its own file switch_mm is an expensive operations that has two users. flush_icache_deferred is only called within switch_mm and can be moved together. The function is expected to be more complicated when ASID support is added, so clean up eagerly. By moving them to a separate file we also removes some excessive dependency of tlbflush.h and cacheflush.h. Signed-off-by: Gary Guo <gary@garyguo.net> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:12 UTC
58de775 riscv: move flush_icache_{all,mm} to cacheflush.c Currently, flush_icache_all is macro-expanded into a SBI call, yet no asm/sbi.h is included in asm/cacheflush.h. This could be moved to mm/cacheflush.c instead (SBI call will dominate performance-wise and there is no worry to not have it inlined. Currently, flush_icache_mm stays in kernel/smp.c, which looks like a hack to prevent it from being compiled when CONFIG_SMP=n. It should also be in mm/cacheflush.c. Signed-off-by: Gary Guo <gary@garyguo.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:12 UTC
f91253a tty: Don't force RISCV SBI console as preferred console The Linux kernel will auto-disables all boot consoles whenever it gets a preferred real console. Currently on RISC-V systems, if we have a real console which is not RISCV SBI console then boot consoles (such as earlycon=sbi) are not auto-disabled when a real console (ttyS0 or ttySIF0) is available. This results in duplicate prints at boot-time after kernel starts using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel parameter was passed by bootloader. The reason for above issue is that RISCV SBI console always adds itself as preferred console which is causing other real consoles to be not used as preferred console. Ideally "console=" kernel parameter passed by bootloaders should be the one selecting a preferred real console. This patch fixes above issue by not forcing RISCV SBI console as preferred console. Fixes: afa6b1ccfad5 ("tty: New RISC-V SBI console driver") Cc: stable@vger.kernel.org Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:11 UTC
a3182c9 RISC-V: Access CSRs using CSR numbers We should prefer accessing CSRs using their CSR numbers because: 1. It compiles fine with older toolchains. 2. We can use latest CSR names in #define macro names of CSR numbers as-per RISC-V spec. 3. We can access newly added CSRs even if toolchain does not recognize newly addes CSRs by name. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:11 UTC
6dcaf00 RISC-V: Add interrupt related SCAUSE defines in asm/csr.h This patch adds SCAUSE interrupt flag and SCAUSE interrupt related defines to asm/csr.h. We also use these defines in kernel/irq.c and express SIE/SIP flags in-terms of SCAUSE interrupt causes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:11 UTC
196a14d RISC-V: Use tabs to align macro values in asm/csr.h The spacing between macro name and value is not consistent in asm/csr.h. This patch beautifies asm/csr.h by using tabs to align macro values instead of spaces. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:11 UTC
f1f47c6 RISC-V: Fix minor checkpatch issues. While working on the patches, I found some minor checkpatch issues. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:11 UTC
8b4302a RISC-V: Support nr_cpus command line option. If nr_cpus command line option is set, maximum possible cpu should be set to that value. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 17 May 2019, 03:42:04 UTC
a6a4b66 Merge tag 'for-linus-20190516' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "A small set of fixes for io_uring. This contains: - smp_rmb() cleanup for io_cqring_events() (Jackie) - io_cqring_wait() simplification (Jackie) - removal of dead 'ev_flags' passing (me) - SQ poll CPU affinity verification fix (me) - SQ poll wait fix (Roman) - SQE command prep cleanup and fix (Stefan)" * tag 'for-linus-20190516' of git://git.kernel.dk/linux-block: io_uring: use wait_event_interruptible for cq_wait conditional wait io_uring: adjust smp_rmb inside io_cqring_events io_uring: fix infinite wait in khread_park() on io_finish_async() io_uring: remove 'ev_flags' argument io_uring: fix failure to verify SQ_AFF cpu io_uring: fix race condition reading SQE data 17 May 2019, 02:10:37 UTC
1718de7 Merge tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block Pull more block updates from Jens Axboe: "This is mainly some late lightnvm changes that came in just before the merge window, as well as fixes that have been queued up since the initial pull request was frozen. This contains: - lightnvm changes, fixing race conditions, improving memory utilization, and improving pblk compatability (Chansol, Igor, Marcin) - NVMe pull request with minor fixes all over the map (via Christoph) - remove redundant error print in sata_rcar (Geert) - struct_size() cleanup (Jackie) - dasd CONFIG_LBADF warning fix (Ming) - brd cond_resched() improvement (Mikulas)" * tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block: (41 commits) block/bio-integrity: use struct_size() in kmalloc() nvme: validate cntlid during controller initialisation nvme: change locking for the per-subsystem controller list nvme: trace all async notice events nvme: fix typos in nvme status code values nvme-fabrics: remove unused argument nvme-multipath: avoid crash on invalid subsystem cntlid enumeration nvme-fc: use separate work queue to avoid warning nvme-rdma: remove redundant reference between ib_device and tagset nvme-pci: mark expected switch fall-through nvme-pci: add known admin effects to augument admin effects log page nvme-pci: init shadow doorbell after each reset brd: add cond_resched to brd_free_pages sata_rcar: Remove ata_host_alloc() error printing s390/dasd: fix build warning in dasd_eckd_build_cp_raw lightnvm: pblk: use nvm_rq_to_ppa_list() lightnvm: pblk: simplify partial read path lightnvm: do not remove instance under global lock lightnvm: track inflight target creations lightnvm: pblk: recover only written metadata ... 17 May 2019, 02:08:15 UTC
815d469 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h 17 May 2019, 02:05:35 UTC
5f3ab27 Merge branch 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "The cgroup2 freezer pulled in this cycle broke strace. This pull request includes a workaround for the problem. It's not a complete fix in that it may cause spurious frozen state flip-flops which is fairly minor. Will push a full fix once it's ready" * 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: signal: unconditionally leave the frozen state in ptrace_stop() 17 May 2019, 02:01:23 UTC
4c7b63a Merge tag 'linux-kselftest-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more kselftest updates from Shuah Khan: - kselftest framework bpf build/test workflow regression fix - Fix to kselftest install to use default install path - Fix to kselftest KBUILD_OUTPUT builds to not clutter main KBUILD_OUTPUT directory with selftest objects - .gitignore fixes (Kelsey Skunberg) - rseq selftests updates (Mathieu Desnoyers and Martin Schwidefsky) They change the per-architecture pre-abort signatures to ensure those are valid trap instructions. The way exit points are presented to debuggers is enhanced, ensuring all exit points are present, so debuggers don't have to disassemble rseq critical section to properly skip over them. Discussions with the glibc community is reaching a consensus of exposing a __rseq_handled symbol from glibc to coexist with rseq early adopters. Update the rseq selftest code to expose and use this symbol. Support for compiling asm goto with clang is added with the "-no-integrated-as" compiler switch, similarly to the top level kernel Makefile. - kselftest Makefile test run output refactoring and making test output TAP13 compliant from Kees Cook: This re-factors the selftest Makefiles to extract the test running logic to be reused between "run_tests" and "emit_tests", while also fixing up the test output to be TAP version 13 compliant: - added "plan" line - fixed result line syntax - moved all test output to be "# "-prefixed as TAP "diagnostic" lines The prefixing code includes a fallback mode for limited execution environments. Additionally, the plan lines are fixed for all callers of kselftest.h. * tag 'linux-kselftest-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits) selftests: avoid KBUILD_OUTPUT dir cluttering with selftest objects selftests: drivers: Create .gitignore to include /dma-buf/udmabuf selftests: pidfd: Create .gitignore to include pidfd_test selftests: fix bpf build/test workflow regression when KBUILD_OUTPUT is set selftests: fix install target to use default install path rseq/selftests: add -no-integrated-as for clang rseq/selftests: mips: use break instruction for RSEQ_SIG rseq/selftests: powerpc code signature: generate valid instructions rseq/selftests: aarch64 code signature: handle big-endian environment rseq/selftests: arm: use udf instruction for RSEQ_SIG rseq/selftests: s390: use trap4 for RSEQ_SIG rseq/selftests: x86: use ud1 instruction as RSEQ_SIG opcode rseq/selftests: s390: use jg instruction for jumps outside of the asm rseq/selftests: Use __rseq_handled symbol to coexist with glibc rseq/selftests: Introduce __rseq_cs_ptr_array, rename __rseq_table to __rseq_cs rseq/selftests: Add __rseq_exit_point_array section for debuggers rseq/selftests: x86: Work-around bogus gcc-8 optimisation selftests: Add test plan API to kselftest.h and adjust callers selftests: Remove KSFT_TAP_LEVEL selftests: Move test output to diagnostic lines ... 17 May 2019, 01:57:58 UTC
9cbda1b Merge tag 'devicetree-for-5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree vendor prefix conversion from Rob Herring: "Conversion of vendor-prefixes.txt to json-schema" * tag 'devicetree-for-5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Convert vendor prefixes to json-schema 17 May 2019, 01:54:13 UTC
0d74471 Merge tag 'afs-fixes-b-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS callback promise fixes from David Howells: "This series fixes a bunch of problems in callback promise handling, where a callback promise indicates a promise on the part of the server to notify the client in the event of some sort of change to a file or volume. In the event of a break, the client has to go and refetch the client status from the server and discard any cached permission information as the ACL might have changed. The problem in the current code is that changes made by other clients aren't always noticed, primarily because the file status information and the callback information aren't updated in the same critical section, even if these are carried in the same reply from an RPC operation, and so the AFS_VNODE_CB_PROMISED flag is unreliable. Arranging for them to be done in the same critical section during reply decoding is tricky because of the FS.InlineBulkStatus op - which has all the statuses in the reply arriving and then all the callbacks, so they have to be buffered. It simplifies things a lot to move the critical section out of the decode phase and do it after the RPC function returns. Also new inodes (either newly fetched or newly created) aren't properly managed against a callback break happening before we get the local inode up and running. Fix this by: - There's now a combined file status and callback record (struct afs_status_cb) to carry both plus some flags. - Each operation wrapper function allocates sufficient afs_status_cb records for all the vnodes it is interested in and passes them into RPC operations to be filled in from the reply. - The FileStatus and CallBack record decoders no longer apply the new/revised status and callback information to the inode/vnode at the point of decoding and instead store the information into the record from (2). - afs_vnode_commit_status() then revises the file status, detects deletion and notes callback information inside of a single critical section. It also checks the callback break counters and cancels the callback promise if they changed during the operation. [*] Note that "callback break counters" are counters of server events that cancel one or more callback promises that the client thinks it has. The client counts the events and compares the counters before and after an operation to see if the callback promise it thinks it just got evaporated before it got recorded under lock. - Volume and server callback break counters are passed into afs_iget() allowing callback breaks concurrent with inode set up to be detected and the callback promise thence to be cancelled. - AFS validation checks are now done under RCU conditions using a read lock on cb_lock. This requires vnode->cb_interest to be made RCU safe. - If the checks in (6) fail, the callback breaker is then called under write lock on the cb_lock - but only if the callback break counter didn't change from the value read before the checks were made. - Results from FS.InlineBulkStatus that correspond to inodes we currently have in memory are now used to update those inodes' status and callback information rather than being discarded. This requires those inodes to be looked up before the RPC op is made and all their callback break values saved. To aid in this, the following changes have also been made: - Don't pass the vnode into the reply delivery functions or the decoders. The vnode shouldn't be altered anywhere in those paths. The only exception, for the moment, is for the call done hook for file lock ops that wants access to both the vnode and the call - this can be fixed at a later time. - Get rid of the call->reply[] void* array and replace it with named and typed members. This avoids confusion since different ops were mapping different reply[] members to different things. - Fix an order-1 kmalloc allocation in afs_do_lookup() and replace it with kvcalloc(). - Always get the reply time. Since callback, lock and fileserver record expiry times are calculated for several RPCs, make this mandatory. - Call afs_pages_written_back() from the operation wrapper rather than from the delivery function. - Don't store the version and type from a callback promise in a reply as the information in them is of very limited use" * tag 'afs-fixes-b-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix application of the results of a inline bulk status fetch afs: Pass pre-fetch server and volume break counts into afs_iget5_set() afs: Fix unlink to handle YFS.RemoveFile2 better afs: Clear AFS_VNODE_CB_PROMISED if we detect callback expiry afs: Make vnode->cb_interest RCU safe afs: Split afs_validate() so first part can be used under LOOKUP_RCU afs: Don't save callback version and type fields afs: Fix application of status and callback to be under same lock afs: Always get the reply time afs: Fix order-1 allocation in afs_do_lookup() afs: Get rid of afs_call::reply[] afs: Don't pass the vnode pointer through into the inline bulk status op 17 May 2019, 00:18:41 UTC
227747f Merge tag 'afs-fixes-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull misc AFS fixes from David Howells: "This fixes a set of miscellaneous issues in the afs filesystem, including: - leak of keys on file close. - broken error handling in xattr functions. - missing locking when updating VL server list. - volume location server DNS lookup whereby preloaded cells may not ever get a lookup and regular DNS lookups to maintain server lists consume power unnecessarily. - incorrect error propagation and handling in the fileserver iteration code causes operations to sometimes apparently succeed. - interruption of server record check/update side op during fileserver iteration causes uninterruptible main operations to fail unexpectedly. - callback promise expiry time miscalculation. - over invalidation of the callback promise on directories. - double locking on callback break waking up file locking waiters. - double increment of the vnode callback break counter. Note that it makes some changes outside of the afs code, including: - an extra parameter to dns_query() to allow the dns_resolver key just accessed to be immediately invalidated. AFS is caching the results itself, so the key can be discarded. - an interruptible version of wait_var_event(). - an rxrpc function to allow the maximum lifespan to be set on a call. - a way for an rxrpc call to be marked as non-interruptible" * tag 'afs-fixes-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix double inc of vnode->cb_break afs: Fix lock-wait/callback-break double locking afs: Don't invalidate callback if AFS_VNODE_DIR_VALID not set afs: Fix calculation of callback expiry time afs: Make dynamic root population wait uninterruptibly for proc_cells_lock afs: Make some RPC operations non-interruptible rxrpc: Allow the kernel to mark a call as being non-interruptible afs: Fix error propagation from server record check/update afs: Fix the maximum lifespan of VL and probe calls rxrpc: Provide kernel interface to set max lifespan on a call afs: Fix "kAFS: AFS vnode with undefined type 0" afs: Fix cell DNS lookup Add wait_var_event_interruptible() dns_resolver: Allow used keys to be invalidated afs: Fix afs_cell records to always have a VL server list record afs: Fix missing lock when replacing VL server list afs: Fix afs_xattr_get_yfs() to not try freeing an error value afs: Fix incorrect error handling in afs_xattr_get_acl() afs: Fix key leak in afs_release() and afs_evict_inode() 17 May 2019, 00:00:13 UTC
1d9d7cb Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "On the filesystem side we have: - a fix to enforce quotas set above the mount point (Luis Henriques) - support for exporting snapshots through NFS (Zheng Yan) - proper statx implementation (Jeff Layton). statx flags are mapped to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account. - some follow-up dentry name handling fixes, in particular elimination of our hand-rolled helper and the switch to __getname() as suggested by Al (Jeff Layton) - a set of MDS client cleanups in preparation for async MDS requests in the future (Jeff Layton) - a fix to sync the filesystem before remounting (Jeff Layton) On the rbd side, work is on-going on object-map and fast-diff image features" * tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits) ceph: flush dirty inodes before proceeding with remount ceph: fix unaligned access in ceph_send_cap_releases libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer libceph: fix unaligned accesses in ceph_entity_addr handling rbd: don't assert on writes to snapshots rbd: client_mutex is never nested ceph: print inode number in __caps_issued_mask debugging messages ceph: just call get_session in __ceph_lookup_mds_session ceph: simplify arguments and return semantics of try_get_cap_refs ceph: fix comment over ceph_drop_caps_for_unlink ceph: move wait for mds request into helper function ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request ceph: after an MDS request, do callback and completions ceph: use pathlen values returned by set_request_path_attr ceph: use __getname/__putname in ceph_mdsc_build_path ceph: use ceph_mdsc_build_path instead of clone_dentry_name ceph: fix potential use-after-free in ceph_mdsc_build_path ceph: dump granular cap info in "caps" debugfs file ceph: make iterate_session_caps a public symbol ceph: fix NULL pointer deref when debugging is enabled ... 16 May 2019, 23:24:01 UTC
2c45e7f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Remove the 'module' Kconfig option for thermal subsystem framework because the thermal framework are required to be ready as early as possible to avoid overheat at boot time (Daniel Lezcano) - Fix a bug that thermal framework pokes disabled thermal zones upon resume (Wei Wang) - A couple of cleanups and trivial fixes on int340x thermal drivers (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal: Downgrade error message mlxsw: Remove obsolete dependency on THERMAL=m hwmon/drivers/core: Simplify complex dependency thermal/drivers/core: Fix typo in the option name thermal/drivers/core: Remove depends on THERMAL in Kconfig thermal/drivers/core: Remove module unload code thermal/drivers/core: Remove the module Kconfig's option thermal: core: skip update disabled thermal zones after suspend thermal: make device_register's type argument const thermal: intel: int340x: processor_thermal_device: simplify to get driver data thermal/int3403_thermal: favor _TMP instead of PTYP 16 May 2019, 23:16:18 UTC
311f712 Merge tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Improve DM snapshot target's scalability by using finer grained locking. Requires some list_bl interface improvements. - Add ability for DM integrity to use a bitmap mode, that tracks regions where data and metadata are out of sync, instead of using a journal. - Improve DM thin provisioning target to not write metadata changes to disk if the thin-pool and associated thin devices are merely activated but not used. This avoids metadata corruption due to concurrent activation of thin devices across different OS instances (e.g. split brain scenarios, which ultimately would be avoided if proper device filters were used -- but not having proper filtering has proven a very common configuration mistake) - Fix missing call to path selector type->end_io in DM multipath. This fixes reported performance problems due to inaccurate path selector IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to particular path due to it seemingly being heavily used). - Fix bug in DM cache metadata's loading of its discard bitset that could lead to all cache blocks being discarded if the very first cache block was discarded (thankfully in practice the first cache block is generally in use; be it FS superblock, partition table, disk label, etc). - Add testing-only DM dust target which simulates a device that has failing sectors and/or read failures. - Fix a DM init error path reference count hang that caused boot hangs if user supplied malformed input on kernel commandline. - Fix a couple issues with DM crypt target's logging being overly verbose or lacking context. - Various other small fixes to DM init, DM multipath, DM zoned, and DM crypt. * tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits) dm: fix a couple brace coding style issues dm crypt: print device name in integrity error message dm crypt: move detailed message into debug level dm ioctl: fix hang in early create error condition dm integrity: whitespace, coding style and dead code cleanup dm integrity: implement synchronous mode for reboot handling dm integrity: handle machine reboot in bitmap mode dm integrity: add a bitmap mode dm integrity: introduce a function add_new_range_and_wait() dm integrity: allow large ranges to be described dm ingerity: pass size to dm_integrity_alloc_page_list() dm integrity: introduce rw_journal_sectors() dm integrity: update documentation dm integrity: don't report unused options dm integrity: don't check null pointer before kvfree and vfree dm integrity: correctly calculate the size of metadata area dm dust: Make dm_dust_init and dm_dust_exit static dm dust: remove redundant unsigned comparison to less than zero dm mpath: always free attached_handler_name in parse_path() dm init: fix max devices/targets checks ... 16 May 2019, 22:55:48 UTC
7878c23 slab: remove /proc/slab_allocators It turned out that DEBUG_SLAB_LEAK is still broken even after recent recue efforts that when there is a large number of objects like kmemleak_object which is normal on a debug kernel, # grep kmemleak /proc/slabinfo kmemleak_object 2243606 3436210 ... reading /proc/slab_allocators could easily loop forever while processing the kmemleak_object cache and any additional freeing or allocating objects will trigger a reprocessing. To make a situation worse, soft-lockups could easily happen in this sitatuion which will call printk() to allocate more kmemleak objects to guarantee an infinite loop. Also, since it seems no one had noticed when it was totally broken more than 2-year ago - see the commit fcf88917dd43 ("slab: fix a crash by reading /proc/slab_allocators"), probably nobody cares about it anymore due to the decline of the SLAB. Just remove it entirely. Suggested-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 May 2019, 22:51:55 UTC
15d574f arm64: dts: sprd: Add clock properties for serial devices We've introduced power management logics for the Spreadtrum serial controller by commit 062ec2774c8a ("serial: sprd: Add power management for the Spreadtrum serial controller"), thus add related clock properties to support this feature. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 16 May 2019, 21:43:33 UTC
39db981 afs: Fix application of the results of a inline bulk status fetch Fix afs_do_lookup() such that when it does an inline bulk status fetch op, it will update inodes that are already extant (something that afs_iget() doesn't do) and to cache permits for each inode created (thereby avoiding a follow up FS.FetchStatus call to determine this). Extant inodes need looking up in advance so that their cb_break counters before and after the operation can be compared. To this end, the inode pointers are cached so that they don't need looking up again after the op. Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup") Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
b835915 afs: Pass pre-fetch server and volume break counts into afs_iget5_set() Pass the server and volume break counts from before the status fetch operation that queried the attributes of a file into afs_iget5_set() so that the new vnode's break counters can be initialised appropriately. This allows detection of a volume or server break that happened whilst we were fetching the status or setting up the vnode. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
a38a755 afs: Fix unlink to handle YFS.RemoveFile2 better Make use of the status update for the target file that the YFS.RemoveFile2 RPC op returns to correctly update the vnode as to whether the file was actually deleted or just had nlink reduced. Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client") Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
61c347b afs: Clear AFS_VNODE_CB_PROMISED if we detect callback expiry Fix afs_validate() to clear AFS_VNODE_CB_PROMISED on a vnode if we detect any condition that causes the callback promise to be broken implicitly, including server break (cb_s_break), volume break (cb_v_break) or callback expiry. Fixes: ae3b7361dc0e ("afs: Fix validation/callback interaction") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
f642404 afs: Make vnode->cb_interest RCU safe Use RCU-based freeing for afs_cb_interest struct objects and use RCU on vnode->cb_interest. Use that change to allow afs_check_validity() to use read_seqbegin_or_lock() instead of read_seqlock_excl(). This also requires the caller of afs_check_validity() to hold the RCU read lock across the call. Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
c925bd0 afs: Split afs_validate() so first part can be used under LOOKUP_RCU Split afs_validate() so that the part that decides if the vnode is still valid can be used under LOOKUP_RCU conditions from afs_d_revalidate(). Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
7c71245 afs: Don't save callback version and type fields Don't save callback version and type fields as the version is about the format of the callback information and the type is relative to the particular RPC call. Signed-off-by: David Howells <dhowells@redhat.com> 16 May 2019, 21:23:21 UTC
8122de5 dt-bindings: Convert vendor prefixes to json-schema Convert the vendor prefix registry to a schema. This will enable checking that new vendor prefixes are added (in addition to the less than perfect checkpatch.pl check) and will also check against adding other prefixes which are not vendors. Converted vendor-prefixes.txt using the following sed script: sed -e 's/\([a-zA-Z0-9\-]*\)[[:space:]]*\([a-zA-Z0-9].*\)/ "^\1,\.\*\":\n description: \2/' Signed-off-by: Rob Herring <robh@kernel.org> 16 May 2019, 20:27:21 UTC
01be377 Merge tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some fixes for some platform drivers (rockchip, atmel, omap, daVinci, tegra-cec, coda and rcar). Also includes a fix on one of the V4L2 uAPI doc, explaining a border case" * tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: rockchip/vpu: Fix/re-order probe-error/remove path media: rockchip/vpu: Initialize mdev->bus_info media: rockchip/vpu: Get vdev from the file arg in vidioc_querycap() media: rockchip/vpu: Add missing dont_use_autosuspend() calls media: rockchip/vpu: Do not request id 0 for our video device media: tegra-cec: fix cec_notifier_parse_hdmi_phandle return check media: davinci/vpbe: array underflow in vpbe_enum_outputs() media: field-order.rst: clarify FIELD_ANY and FIELD_NONE media: staging/imx: add media device to capture register media: rcar-csi2: Propagate the FLD signal for NTSC and PAL media: rcar-csi2: restart CSI-2 link if error is detected media: omap_vout: potential buffer overflow in vidioc_dqbuf() media: coda: fix unset field and fail on invalid field in buf_prepare media: atmel: atmel-isc: fix asd memory allocation media: atmel: atmel-isc: fix INIT_WORK misplacement media: atmel: atmel-isc: limit incoming pixels per frame 16 May 2019, 18:57:16 UTC
back to top